Merge FPGA repository back into UHD repository

The FPGA codebase was removed from the UHD repository in 2014 to reduce
the size of the repository. However, over the last half-decade, the
split between the repositories has proven more burdensome than it has
been helpful. By merging the FPGA code back, it will be possible to
create atomic commits that touch both FPGA and UHD codebases. Continuous
integration testing is also simplified by merging the repositories,
because it was previously difficult to automatically derive the correct
UHD branch when testing a feature branch on the FPGA repository.

This commit also updates the license files and paths therein.

We are therefore merging the repositories again. Future development for
FPGA code will happen in the same repository as the UHD host code and
MPM code.

== Original Codebase and Rebasing ==

The original FPGA repository will be hosted for the foreseeable future
at its original local location: https://github.com/EttusResearch/fpga/

It can be used for bisecting, reference, and a more detailed history.

The final commit from said repository to be merged here is
05003794e2da61cabf64dd278c45685a7abad7ec. This commit is tagged as
v4.0.0.0-pre-uhd-merge.

If you have changes in the FPGA repository that you want to rebase onto
the UHD repository, simply run the following commands:

- Create a directory to store patches (this should be an empty
  directory):

    mkdir ~/patches

- Now make sure that your FPGA codebase is based on the same state as
  the code that was merged:

    cd src/fpga # Or wherever your FPGA code is stored
    git rebase v4.0.0.0-pre-uhd-merge

  Note: The rebase command may look slightly different depending on what
  exactly you're trying to rebase.

- Create a patch set for your changes versus v4.0.0.0-pre-uhd-merge:

    git format-patch v4.0.0.0-pre-uhd-merge -o ~/patches

  Note: Make sure that only patches are stored in your output directory.
  It should otherwise be empty. Make sure that you picked the correct
  range of commits, and only commits you wanted to rebase were exported
  as patch files.

- Go to the UHD repository and apply the patches:

    cd src/uhd # Or wherever your UHD repository is stored
    git am --directory fpga ~/patches/*
    rm -rf ~/patches # This is for cleanup

== Contributors ==

The following people have contributed mainly to these files (this list
is not complete):

Co-authored-by: Alex Williams <alex.williams@ni.com>
Co-authored-by: Andrej Rode <andrej.rode@ettus.com>
Co-authored-by: Ashish Chaudhari <ashish@ettus.com>
Co-authored-by: Ben Hilburn <ben.hilburn@ettus.com>
Co-authored-by: Ciro Nishiguchi <ciro.nishiguchi@ni.com>
Co-authored-by: Daniel Jepson <daniel.jepson@ni.com>
Co-authored-by: Derek Kozel <derek.kozel@ettus.com>
Co-authored-by: EJ Kreinar <ej@he360.com>
Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com>
Co-authored-by: Ian Buckley <ian.buckley@gmail.com>
Co-authored-by: Jörg Hofrichter <joerg.hofrichter@ni.com>
Co-authored-by: Jon Kiser <jon.kiser@ni.com>
Co-authored-by: Josh Blum <josh@joshknows.com>
Co-authored-by: Jonathon Pendlum <jonathan.pendlum@ettus.com>
Co-authored-by: Martin Braun <martin.braun@ettus.com>
Co-authored-by: Matt Ettus <matt@ettus.com>
Co-authored-by: Michael West <michael.west@ettus.com>
Co-authored-by: Moritz Fischer <moritz.fischer@ettus.com>
Co-authored-by: Nick Foster <nick@ettus.com>
Co-authored-by: Nicolas Cuervo <nicolas.cuervo@ettus.com>
Co-authored-by: Paul Butler <paul.butler@ni.com>
Co-authored-by: Paul David <paul.david@ettus.com>
Co-authored-by: Ryan Marlow <ryan.marlow@ettus.com>
Co-authored-by: Sugandha Gupta <sugandha.gupta@ettus.com>
Co-authored-by: Sylvain Munaut <tnt@246tNt.com>
Co-authored-by: Trung Tran <trung.tran@ettus.com>
Co-authored-by: Vidush Vishwanath <vidush.vishwanath@ettus.com>
Co-authored-by: Wade Fife <wade.fife@ettus.com>

1 files changed, 167 insertions, 0 deletions

diff --git a/fpga/usrp3/lib/control_200/cvita_uart.v b/fpga/usrp3/lib/control_200/cvita_uart.v
new file mode 100644
index 000000000..1afcbb5f0
--- /dev/null
+++ b/fpga/usrp3/lib/control_200/cvita_uart.v
@@ -0,0 +1,167 @@
+
+//
+// Copyright 2013 Ettus Research LLC
+// Copyright 2018 Ettus Research, a National Instruments Company
+//
+// SPDX-License-Identifier: LGPL-3.0-or-later
+//
+
+
+//create a compressed vita based uart data interface
+
+module cvita_uart
+#(
+    parameter SIZE = 0
+)
+(
+    //clocking interface
+    input clk, input rst,
+
+    //uart interface
+    input rxd, output txd,
+
+    //chdr fifo input
+    input [63:0] i_tdata,
+    input i_tlast,
+    input i_tvalid,
+    output i_tready,
+
+    //chdr fifo output
+    output [63:0] o_tdata,
+    output o_tlast,
+    output o_tvalid,
+    input o_tready
+);
+
+    reg [31:0] sid;
+
+    //baud clock divider
+    reg [15:0] clkdiv;
+
+    //hold rx in disable until a tx event
+    reg rxd_enable;
+
+    //==================================================================
+    //== RXD capture and packet generation interface
+    //==================================================================
+    wire [7:0] rx_char;
+    wire fifo_empty;
+    wire fifo_read;
+    reg [11:0] seqnum;
+    wire pgen_trigger;
+    wire pgen_done;
+
+    //rx uart capture
+    simple_uart_rx #(.SIZE(SIZE)) simple_uart_rx
+    (
+        .clk(clk), .rst(rst | ~rxd_enable),
+        .fifo_out(rx_char), .fifo_read(fifo_read), .fifo_level(), .fifo_empty(fifo_empty),
+        .clkdiv(clkdiv), .rx(rxd)
+    );
+
+    //packet generation - holds rx character
+    context_packet_gen context_packet_gen
+    (
+        .clk(clk), .reset(rst), .clear(1'b0),
+        .trigger(pgen_trigger),
+        .seqnum(seqnum),
+        .sid({sid[15:0], sid[31:16]}),
+        .body({56'b0, rx_char}),
+        .vita_time(64'b0),
+
+        .done(pgen_done),
+        .o_tdata(o_tdata), .o_tlast(o_tlast), .o_tvalid(o_tvalid), .o_tready(o_tready)
+    );
+
+    //state machine to manage pgen and rx uart
+    reg [1:0] rxd_state;
+    localparam RXD_STATE_RECV_CHAR = 0;
+    localparam RXD_STATE_PGEN_TRIG = 1;
+    localparam RXD_STATE_WAIT_DONE = 2;
+    localparam RXD_STATE_READ_FIFO = 3;
+
+    always @(posedge clk) begin
+        if (rst) begin
+            seqnum <= 12'b0;
+            rxd_state <= RXD_STATE_RECV_CHAR;
+        end
+        else case (rxd_state)
+
+        RXD_STATE_RECV_CHAR: begin
+            if (!fifo_empty && rxd_enable) rxd_state <= RXD_STATE_PGEN_TRIG;
+        end
+
+        RXD_STATE_PGEN_TRIG: begin
+            rxd_state <= RXD_STATE_WAIT_DONE;
+        end
+
+        RXD_STATE_WAIT_DONE: begin
+            if (pgen_done) rxd_state <= RXD_STATE_READ_FIFO;
+        end
+
+        RXD_STATE_READ_FIFO: begin
+            rxd_state <= RXD_STATE_RECV_CHAR;
+            seqnum <= seqnum + 1'b1;
+        end
+
+        endcase //rxd_state
+    end
+
+    assign fifo_read = (rxd_state == RXD_STATE_READ_FIFO) || (!rxd_enable);
+    assign pgen_trigger = (rxd_state == RXD_STATE_PGEN_TRIG);
+
+    //==================================================================
+    //== TXD generation and packet control interface
+    //==================================================================
+    wire [7:0] tx_char;
+    wire fifo_write;
+    wire fifo_full;
+
+    simple_uart_tx #(.SIZE(SIZE)) simple_uart_tx
+    (
+        .clk(clk), .rst(rst),
+        .fifo_in(tx_char), .fifo_write(fifo_write), .fifo_level(), .fifo_full(fifo_full),
+        .clkdiv(clkdiv), .baudclk(), .tx(txd)
+    );
+
+    //state machine to manage control and tx uart
+    reg [1:0] txd_state;
+    localparam TXD_STATE_RECV_CHDR = 0;
+    localparam TXD_STATE_RECV_TIME = 1;
+    localparam TXD_STATE_RECV_BODY = 2;
+    localparam TXD_STATE_DROP_FIFO = 3;
+
+    always @(posedge clk) begin
+        if (rst) begin;
+            txd_state <= TXD_STATE_RECV_CHDR;
+            rxd_enable <= 1'b0;
+        end
+        if (i_tvalid && i_tready) case (txd_state)
+
+        TXD_STATE_RECV_CHDR: begin
+            txd_state <= (i_tdata[61])? TXD_STATE_RECV_TIME : TXD_STATE_RECV_BODY;
+            sid <= i_tdata[31:0];
+        end
+
+        TXD_STATE_RECV_TIME: begin
+            txd_state <= TXD_STATE_RECV_BODY;
+        end
+
+        TXD_STATE_RECV_BODY: begin
+            txd_state <= (i_tlast)? TXD_STATE_RECV_CHDR : TXD_STATE_DROP_FIFO;
+            clkdiv <= i_tdata[47:32];
+            rxd_enable <= 1'b1;
+        end
+
+        TXD_STATE_DROP_FIFO: begin
+            if (i_tlast) txd_state <= TXD_STATE_RECV_CHDR;
+        end
+
+        endcase //txd_state
+    end
+
+    assign tx_char = i_tdata[7:0];
+    assign fifo_write = (txd_state == TXD_STATE_RECV_BODY) && i_tvalid && i_tready;
+    assign i_tready = !fifo_full;
+
+endmodule // cvita_uart