Removed copy of FPGA source files.

1 files changed, 0 insertions, 172 deletions

diff --git a/fpga/usrp2/sdr_lib/hb_tb.v b/fpga/usrp2/sdr_lib/hb_tb.v
deleted file mode 100644
index 3260ac738..000000000
--- a/fpga/usrp2/sdr_lib/hb_tb.v
+++ /dev/null
@@ -1,172 +0,0 @@
-//
-// Copyright 2011 Ettus Research LLC
-//
-// This program is free software: you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program.  If not, see <http://www.gnu.org/licenses/>.
-//
-
-
-module hb_tb();
-
-   localparam SWIDTH = 17;
-   localparam CWIDTH = 18;
-   localparam TWIDTH = 20;
-   localparam ACC_WIDTH = 40;
-   
-   reg clk = 0, rst = 1;
-   wire strobe_in, strobe_out;
-   reg [SWIDTH-1:0] sample_in;
-   wire signed [SWIDTH:0] sample_out;
-
-   reg 	       set_stb;
-   reg [7:0]   set_addr;
-   reg [31:0]  set_data;
-
-   localparam  DECIM = 3;
-   
-   initial $dumpfile("hb_tb.vcd");
-   initial $dumpvars(0,hb_tb);
-
-   always #5 clk <= ~clk;
-   initial 
-     begin
-	@(posedge clk);
-	@(negedge clk);
-	rst <= 0;
-     end
-
-   reg [7:0] stb_counter;
-   always @(posedge clk)
-     if(rst)
-       stb_counter <= 0;
-     else
-       if(stb_counter == 0)
-	 stb_counter <= DECIM;
-       else
-	 stb_counter <= stb_counter - 1;
-   assign    strobe_in = (stb_counter == 0);
-   
-   hb_decim #(.SWIDTH(SWIDTH),.CWIDTH(CWIDTH),
-	      .TWIDTH(TWIDTH),.ACC_WIDTH(ACC_WIDTH)) hb_decim
-     (.clk(clk), .rst(rst),
-      .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
-      .sample_in(sample_in),
-      .strobe_in(strobe_in),
-      .sample_out(sample_out),
-      .strobe_out(strobe_out)
-      );
-
-   initial
-     begin : load_coeffs
-	@(negedge rst);
-	@(posedge clk);
-	set_addr <= 124;   // load coeffs
-	set_stb <= 1;
-	set_data <= -18'd49;
-	@(posedge clk);
-	set_data <= 18'd165;
-	@(posedge clk);
-	set_data <= -18'd412;
-	@(posedge clk);
-	set_data <= 18'd873;
-	@(posedge clk);
-	set_data <= -18'd1681;
-	@(posedge clk);
-	set_data <= 18'd3135;
-	@(posedge clk);
-	set_data <= -18'd6282;
-	@(posedge clk);
-	set_data <= 18'd20628;
-	@(posedge clk);
-	set_addr <=125;  // load table
-	// { stb_out, accum, load_accum, done, even_addr, odd_addr_a, odd_addr_b, coeff_addr }
-	set_data <= {1'b1,1'b1,1'b0,1'b1,4'd15,4'd15,4'd0,4'd0}; // Phase 8
-	@(posedge clk);
-	set_data <= {1'b0,1'b1,1'b0,1'b0,4'd15,4'd14,4'd1,4'd1}; // Phase 7
-	@(posedge clk);
-	set_data <= {1'b0,1'b1,1'b0,1'b0,4'd15,4'd13,4'd2,4'd2}; // Phase 6
-	@(posedge clk);
-	set_data <= {1'b0,1'b1,1'b0,1'b0,4'd15,4'd12,4'd3,4'd3}; // Phase 5
-	@(posedge clk);
-	set_data <= {1'b0,1'b1,1'b0,1'b0,4'd15,4'd11,4'd4,4'd4}; // Phase 4
-	@(posedge clk);
-	set_data <= {1'b0,1'b1,1'b0,1'b0,4'd15,4'd10,4'd5,4'd5}; // Phase 3
-	@(posedge clk);
-	set_data <= {1'b0,1'b1,1'b0,1'b0,4'd15,4'd9,4'd6,4'd6};  // Phase 2
-	@(posedge clk);
-	set_data <= {1'b0,1'b0,1'b1,1'b0,4'd15,4'd8,4'd7,4'd7};   // Phase 1
-	@(posedge clk);
-	set_data <= {1'b0,1'b0,1'b0,1'b0,4'd15,4'd8,4'd7,4'd7};   // Phase 0
-	@(posedge clk);
-	set_stb <= 0;
-     end // block: load_coeffs
-   
-   initial
-     begin
-	sample_in <= 0;
-	repeat(40)
-	  @(posedge strobe_in);
-	$display("EVEN");
-	sample_in <= 0;
-	repeat(10)
-	  @(posedge strobe_in);
-	sample_in <= 1;
-	@(posedge strobe_in);
-	sample_in <= 0;
-	repeat(40)
-	  @(posedge strobe_in);
-	sample_in <= 1;
-	repeat(40)
-	  @(posedge strobe_in);
-	sample_in <= 0;
-	repeat(60)
-	  @(posedge strobe_in);
-	sample_in <= 1;
-	repeat(2)
-	  @(posedge strobe_in);
-	sample_in <= 0;
-	repeat(60)
-	  @(posedge strobe_in);
-	$display("ODD");
-	sample_in <= 0;
-	repeat(10)
-	  @(posedge strobe_in);
-	sample_in <= 1;
-	@(posedge strobe_in);
-	sample_in <= 0;
-	repeat(40)
-	  @(posedge strobe_in);
-	sample_in <= 1;
-	repeat(40)
-	  @(posedge strobe_in);
-	sample_in <= 0;
-	repeat(60)
-	  @(posedge strobe_in);
-	sample_in <= 1;
-	repeat(2)
-	  @(posedge strobe_in);
-	sample_in <= 0;
-	repeat(60)
-	  @(posedge strobe_in);
-	$finish;
-     end
-
-   always @(posedge clk)
-     if(strobe_in)
-       $display(sample_in);
-   
-      always @(posedge clk)
-	if(strobe_out)
-	  $display("\t",sample_out);
-
-endmodule // hb_tb