Removed copy of FPGA source files.

1 files changed, 0 insertions, 165 deletions

diff --git a/fpga/usrp2/sdr_lib/duc_chain.v b/fpga/usrp2/sdr_lib/duc_chain.v
deleted file mode 100644
index bd3402a1f..000000000
--- a/fpga/usrp2/sdr_lib/duc_chain.v
+++ /dev/null
@@ -1,165 +0,0 @@
-//
-// Copyright 2011-2012 Ettus Research LLC
-//
-// This program is free software: you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program.  If not, see <http://www.gnu.org/licenses/>.
-//
-
-//! The USRP digital up-conversion chain
-
-module duc_chain
-  #(
-    parameter BASE = 0,
-    parameter DSPNO = 0,
-    parameter WIDTH = 24
-  )
-  (input clk, input rst, input clr,
-   input set_stb, input [7:0] set_addr, input [31:0] set_data,
-   input set_stb_user, input [7:0] set_addr_user, input [31:0] set_data_user,
-
-   // To TX frontend
-   output [WIDTH-1:0] tx_fe_i,
-   output [WIDTH-1:0] tx_fe_q,
-
-   // From TX control
-   input [31:0] sample,
-   input run,
-   output strobe,
-   output [31:0] debug
-   );
-
-   wire duc_enb;
-   wire [17:0] scale_factor;
-   wire [31:0] phase_inc;
-   reg [31:0]  phase;
-   wire [7:0]  interp_rate;
-   wire [3:0]  tx_femux_a, tx_femux_b;
-   wire        enable_hb1, enable_hb2;
-   wire        rate_change;
-   
-   setting_reg #(.my_addr(BASE+0)) sr_0
-     (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
-      .in(set_data),.out(phase_inc),.changed());
-
-   setting_reg #(.my_addr(BASE+1), .width(18)) sr_1
-     (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
-      .in(set_data),.out(scale_factor),.changed());
-   
-   setting_reg #(.my_addr(BASE+2), .width(10)) sr_2
-     (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
-      .in(set_data),.out({enable_hb1, enable_hb2, interp_rate}),.changed(rate_change));
-
-   // Strobes are all now delayed by 1 cycle for timing reasons
-   wire        strobe_cic_pre, strobe_hb1_pre, strobe_hb2_pre;
-   reg 	       strobe_cic = 1;
-   reg 	       strobe_hb1 = 1;
-   reg 	       strobe_hb2 = 1;
-   
-   cic_strober #(.WIDTH(8))
-     cic_strober(.clock(clk),.reset(rst),.enable(duc_enb & ~rate_change),.rate(interp_rate),
-		 .strobe_fast(1),.strobe_slow(strobe_cic_pre) );
-   cic_strober #(.WIDTH(2))
-     hb2_strober(.clock(clk),.reset(rst),.enable(duc_enb & ~rate_change),.rate(enable_hb2 ? 2 : 1),
-		 .strobe_fast(strobe_cic_pre),.strobe_slow(strobe_hb2_pre) );
-   cic_strober #(.WIDTH(2))
-     hb1_strober(.clock(clk),.reset(rst),.enable(duc_enb & ~rate_change),.rate(enable_hb1 ? 2 : 1),
-		 .strobe_fast(strobe_hb2_pre),.strobe_slow(strobe_hb1_pre) );
-   
-   always @(posedge clk) strobe_hb1 <= strobe_hb1_pre;
-   always @(posedge clk) strobe_hb2 <= strobe_hb2_pre;
-   always @(posedge clk) strobe_cic <= strobe_cic_pre;
-
-   // NCO
-   always @(posedge clk)
-     if(rst)
-       phase <= 0;
-     else if(~duc_enb)
-       phase <= 0;
-     else
-       phase <= phase + phase_inc;
-   
-   wire        signed [17:0] da, db;
-   wire        signed [35:0] prod_i, prod_q;
-
-   wire [15:0] bb_i;
-   wire [15:0] bb_q;
-   wire [17:0] i_interp, q_interp;
-
-   wire [17:0] hb1_i, hb1_q, hb2_i, hb2_q;
-
-   wire [7:0]  cpo = enable_hb2 ? ({interp_rate,1'b0}) : interp_rate;
-   // Note that max CIC rate is 128, which would give an overflow on cpo if enable_hb2 is true,
-   //   but the default case inside hb_interp handles this
-   
-   hb_interp #(.IWIDTH(18),.OWIDTH(18),.ACCWIDTH(WIDTH)) hb_interp_i
-     (.clk(clk),.rst(rst),.bypass(~enable_hb1),.cpo(cpo),.stb_in(strobe_hb1),.data_in({bb_i, 2'b0}),.stb_out(strobe_hb2),.data_out(hb1_i));
-   hb_interp #(.IWIDTH(18),.OWIDTH(18),.ACCWIDTH(WIDTH)) hb_interp_q
-     (.clk(clk),.rst(rst),.bypass(~enable_hb1),.cpo(cpo),.stb_in(strobe_hb1),.data_in({bb_q, 2'b0}),.stb_out(strobe_hb2),.data_out(hb1_q));
-   
-   small_hb_int #(.WIDTH(18)) small_hb_interp_i
-     (.clk(clk),.rst(rst),.bypass(~enable_hb2),.stb_in(strobe_hb2),.data_in(hb1_i),
-      .output_rate(interp_rate),.stb_out(strobe_cic),.data_out(hb2_i));
-   small_hb_int #(.WIDTH(18)) small_hb_interp_q
-     (.clk(clk),.rst(rst),.bypass(~enable_hb2),.stb_in(strobe_hb2),.data_in(hb1_q),
-      .output_rate(interp_rate),.stb_out(strobe_cic),.data_out(hb2_q));
-   
-   cic_interp  #(.bw(18),.N(4),.log2_of_max_rate(7))
-     cic_interp_i(.clock(clk),.reset(rst),.enable(duc_enb & ~rate_change),.rate(interp_rate),
-		  .strobe_in(strobe_cic),.strobe_out(1),
-		  .signal_in(hb2_i),.signal_out(i_interp));
-   
-   cic_interp  #(.bw(18),.N(4),.log2_of_max_rate(7))
-     cic_interp_q(.clock(clk),.reset(rst),.enable(duc_enb & ~rate_change),.rate(interp_rate),
-		  .strobe_in(strobe_cic),.strobe_out(1),
-		  .signal_in(hb2_q),.signal_out(q_interp));
-
-   localparam  cwidth = WIDTH;  // was 18
-   localparam  zwidth = 24;  // was 16
-
-   wire [cwidth-1:0] da_c, db_c;
-   
-   cordic_z24 #(.bitwidth(cwidth))
-     cordic(.clock(clk), .reset(rst), .enable(duc_enb),
-	    .xi({i_interp,{(cwidth-18){1'b0}}}),.yi({q_interp,{(cwidth-18){1'b0}}}),
-	    .zi(phase[31:32-zwidth]),
-	    .xo(da_c),.yo(db_c),.zo() );
-   
-   MULT18X18S MULT18X18S_inst 
-     (.P(prod_i),    // 36-bit multiplier output
-      .A(da_c[cwidth-1:cwidth-18]),    // 18-bit multiplier input
-      .B(scale_factor),    // 18-bit multiplier input
-      .C(clk),    // Clock input
-      .CE(1),  // Clock enable input
-      .R(rst)     // Synchronous reset input
-      );
-   
-   MULT18X18S MULT18X18S_inst_2 
-     (.P(prod_q),    // 36-bit multiplier output
-      .A(db_c[cwidth-1:cwidth-18]),    // 18-bit multiplier input
-      .B(scale_factor),    // 18-bit multiplier input
-      .C(clk),    // Clock input
-      .CE(1),  // Clock enable input
-      .R(rst)     // Synchronous reset input
-      );
-
-   dsp_tx_glue #(.DSPNO(DSPNO), .WIDTH(WIDTH)) dsp_tx_glue(
-    .clock(clk), .reset(rst), .clear(clr), .enable(run),
-    .set_stb(set_stb_user), .set_addr(set_addr_user), .set_data(set_data_user),
-    .frontend_i(tx_fe_i), .frontend_q(tx_fe_q),
-    .duc_out_i(prod_i[33:34-WIDTH]), .duc_out_q(prod_q[33:34-WIDTH]),
-    .duc_in_sample({bb_i, bb_q}), .duc_in_strobe(strobe_hb1), .duc_in_enable(duc_enb),
-    .bb_sample(sample), .bb_strobe(strobe));
-
-   assign      debug = {strobe_cic, strobe_hb1, strobe_hb2,run};
-
-endmodule // dsp_core