Merge branch 'next'

2 files changed, 157 insertions, 1 deletions

diff --git a/fpga/usrp2/fifo/Makefile.srcs b/fpga/usrp2/fifo/Makefile.srcs
index 6cbd5cd3f..55ba0be2a 100644
--- a/fpga/usrp2/fifo/Makefile.srcs
+++ b/fpga/usrp2/fifo/Makefile.srcs
@@ -1,5 +1,5 @@
 #
-# Copyright 2010 Ettus Research LLC
+# Copyright 2010-2012 Ettus Research LLC
 #
 
 ##################################################
@@ -38,4 +38,5 @@ packet_generator.v \
 packet_verifier32.v \
 packet_verifier.v \
 fifo19_pad.v \
+packet_padder36.v \
 ))
diff --git a/fpga/usrp2/fifo/packet_padder36.v b/fpga/usrp2/fifo/packet_padder36.v
new file mode 100644
index 000000000..7197b5ea5
--- /dev/null
+++ b/fpga/usrp2/fifo/packet_padder36.v
@@ -0,0 +1,155 @@
+//
+// Copyright 2011-2012 Ettus Research LLC
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program.  If not, see <http://www.gnu.org/licenses/>.
+//
+
+// The packet padder 36 for use with RX VITA stream output.
+// Packet padder understands the concept of USB LUTs,
+// and will forward packets through the interface,
+// adding zero padding as needed to properly flush.
+// The padder will never write a packet across a LUT boundary.
+// When flushing, padder writes out zeros until the LUT boundary.
+// Requires that the input line0 be a VITA header, and SOF set.
+// Flush when the LUT is partially filled and timeout is reached,
+// or when the LUT is partially filled and the DSP is inactive.
+
+module packet_padder36
+#(
+    parameter BASE = 0,
+
+    //default is 16K LUT
+    parameter DEFAULT_LINES32 = 4096,
+
+    //default about 1ms at 64MHz clock
+    parameter DEFAULT_IDLE_CYC = 65536
+)
+(
+    input clk, input reset,
+
+    //setting bus
+    input set_stb, input [7:0] set_addr, input [31:0] set_data,
+
+    //input interface
+    input [35:0] data_i,
+    input src_rdy_i,
+    output dst_rdy_o,
+
+    //output interface
+    output [35:0] data_o,
+    output src_rdy_o,
+    input dst_rdy_i,
+
+    input always_flush
+);
+
+    wire lut_lines_changed;
+    wire [15:0] max_lut_lines32;
+    setting_reg #(.my_addr(BASE+0),.width(16),.at_reset(DEFAULT_LINES32)) sr_num_lines(
+        .clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr),.in(set_data),
+        .out(max_lut_lines32),.changed(lut_lines_changed));
+
+    wire idle_cyc_changed;
+    wire [17:0] idle_flush_cycles;
+    setting_reg #(.my_addr(BASE+1),.width(18),.at_reset(DEFAULT_IDLE_CYC)) sr_flush_cyc(
+        .clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr),.in(set_data),
+        .out(idle_flush_cycles),.changed(idle_cyc_changed));
+
+    //state machine definitions
+    localparam STATE_READ_HDR = 0;
+    localparam STATE_WRITE_HDR = 1;
+    localparam STATE_FORWARD = 2;
+    localparam STATE_WRITE_PAD = 3;
+    reg [1:0] state;
+
+    //keep track of the outgoing lines
+    reg [15:0] line_count;
+    wire line_count_done = line_count == 1;
+    wire lut_is_empty = line_count == max_lut_lines32;
+    always @(posedge clk) begin
+        if (reset || lut_lines_changed) begin
+            line_count <= max_lut_lines32;
+        end
+        else if (src_rdy_o && dst_rdy_i) begin
+            line_count <= (line_count_done)? max_lut_lines32 : line_count - 1;
+        end
+    end
+
+    //count the number of cycles since RX data so we can force a flush
+    reg [17:0] non_rx_cycles;
+    wire idle_timeout = (non_rx_cycles == idle_flush_cycles);
+    always @(posedge clk) begin
+        if(reset || state != STATE_READ_HDR || idle_cyc_changed) begin
+            non_rx_cycles <= 0;
+        end
+        else if (~idle_timeout) begin
+            non_rx_cycles <= non_rx_cycles + 1;
+        end
+    end
+
+    //flush when we have written data to a LUT and either idle or non active DSP
+    wire force_flush = ~lut_is_empty && (idle_timeout || always_flush);
+
+    //the padding state machine
+    reg [31:0] vita_hdr;
+    reg has_vita_hdr;
+    always @(posedge clk) begin
+        if (reset) begin
+            state <= STATE_READ_HDR;
+        end
+        else case(state)
+
+        STATE_READ_HDR: begin
+            if (src_rdy_i && dst_rdy_o && data_i[32]) begin
+                vita_hdr <= data_i[31:0];
+                has_vita_hdr <= 1;
+                state <= (data_i[15:0] > line_count)? state <= STATE_WRITE_PAD : STATE_WRITE_HDR;
+            end
+            else if (force_flush) begin
+                has_vita_hdr <= 0;
+                state <= STATE_WRITE_PAD;
+            end
+        end
+
+        STATE_WRITE_HDR: begin
+            if (src_rdy_o && dst_rdy_i) begin
+                state <= STATE_FORWARD;
+            end
+        end
+
+        STATE_FORWARD: begin
+            if (src_rdy_i && dst_rdy_o && data_i[33]) begin
+                state <= STATE_READ_HDR;
+            end
+        end
+
+        STATE_WRITE_PAD: begin
+            if (src_rdy_o && dst_rdy_i && line_count_done) begin
+                state <= (has_vita_hdr)? STATE_WRITE_HDR : STATE_READ_HDR;
+            end
+        end
+
+        endcase //state
+    end
+
+    //assign outgoing signals
+    assign dst_rdy_o = (state == STATE_READ_HDR)? 1 : ((state == STATE_FORWARD)? dst_rdy_i : 0);
+    assign src_rdy_o = (state == STATE_WRITE_HDR || state == STATE_WRITE_PAD)? 1 : ((state == STATE_FORWARD )? src_rdy_i : 0);
+    assign data_o = (state == STATE_WRITE_HDR)? {4'b0001, vita_hdr} : ((state == STATE_FORWARD)? data_i : 0);
+
+endmodule // packet_padder36
+
+
+
+