Removed copy of FPGA source files.

1 files changed, 0 insertions, 66 deletions

diff --git a/fpga/usrp2/control_lib/wb_output_pins32.v b/fpga/usrp2/control_lib/wb_output_pins32.v
deleted file mode 100644
index 43e239797..000000000
--- a/fpga/usrp2/control_lib/wb_output_pins32.v
+++ /dev/null
@@ -1,66 +0,0 @@
-//
-// Copyright 2011 Ettus Research LLC
-//
-// This program is free software: you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program.  If not, see <http://www.gnu.org/licenses/>.
-//
-
-
-
-// Simple 32-bit Wishbone compatible slave output port
-// with 8-bit granularity, modeled after the one in the spec
-// Allows for readback
-// Assumes a 32-bit wishbone bus
-// Lowest order bits get sel[0]
-//
-
-module wb_output_pins32
-  (wb_rst_i, wb_clk_i, wb_dat_i, wb_dat_o,
-   wb_we_i, wb_sel_i, wb_stb_i, wb_ack_o, wb_cyc_i,
-   port_output);
-
-   input wb_rst_i;
-   input wb_clk_i;
-   input wire [31:0] wb_dat_i;
-   output wire [31:0] wb_dat_o;
-   input  wb_we_i;
-   input  wire [3:0] 	 wb_sel_i;
-   input  wb_stb_i;
-   output wb_ack_o;
-   input  wb_cyc_i;
-
-   output wire [31:0] port_output;
-
-   reg [31:0] internal_reg;
-
-   always @(posedge wb_clk_i)
-     if(wb_rst_i)
-       internal_reg <= #1 32'b0;
-     else
-       begin
-	  if(wb_stb_i & wb_we_i & wb_sel_i[0])
-	    internal_reg[7:0] <= #1 wb_dat_i[7:0];
-	  if(wb_stb_i & wb_we_i & wb_sel_i[1])
-	    internal_reg[15:8] <= #1 wb_dat_i[15:8];
-	  if(wb_stb_i & wb_we_i & wb_sel_i[2])
-	    internal_reg[23:16] <= #1 wb_dat_i[23:16];
-	  if(wb_stb_i & wb_we_i & wb_sel_i[3])
-	    internal_reg[31:24] <= #1 wb_dat_i[31:24];
-       end // else: !if(wb_rst_i)
-
-   assign wb_dat_o = internal_reg;
-   assign port_output = internal_reg;
-   assign wb_ack_o = wb_stb_i;
-   	     
-endmodule // wb_output_pins32
-