Merge remote branch 'origin/usrp_e_next' into usrp_e_next

1 files changed, 60 insertions, 0 deletions

diff --git a/fpga/usrp2/control_lib/atr_controller16.v b/fpga/usrp2/control_lib/atr_controller16.v
new file mode 100644
index 000000000..3d8b5b1e9
--- /dev/null
+++ b/fpga/usrp2/control_lib/atr_controller16.v
@@ -0,0 +1,60 @@
+
+// Automatic transmit/receive switching of control pins to daughterboards
+// Store everything in registers for now, but could use a RAM for more
+// complex state machines in the future
+
+module atr_controller16
+  (input clk_i, input rst_i,
+   input [5:0] adr_i, input [1:0] sel_i, input [15:0] dat_i, output reg [15:0] dat_o,
+   input we_i, input stb_i, input cyc_i, output reg ack_o,
+   input run_rx, input run_tx, input [31:0] master_time,
+   output [31:0] ctrl_lines);
+   
+   reg [3:0] state;
+   reg [31:0] atr_ram [0:15];  // DP distributed RAM
+
+   wire [3:0] sel_int = { (sel_i[1] & adr_i[1]), (sel_i[0] & adr_i[1]),
+			  (sel_i[1] & ~adr_i[1]), (sel_i[0] & ~adr_i[1]) };
+   
+   // WB Interface
+   always @(posedge clk_i)
+     if(we_i & stb_i & cyc_i)
+       begin
+	  if(sel_int[3])
+	    atr_ram[adr_i[5:2]][31:24] <= dat_i[15:8];
+	  if(sel_int[2])
+	    atr_ram[adr_i[5:2]][23:16] <= dat_i[7:0];
+	  if(sel_int[1])
+	    atr_ram[adr_i[5:2]][15:8] <= dat_i[15:8];
+	  if(sel_int[0])
+	    atr_ram[adr_i[5:2]][7:0] <= dat_i[7:0];
+       end // if (we_i & stb_i & cyc_i)
+
+   always @(posedge clk_i)
+     dat_o <= adr_i[1] ? atr_ram[adr_i[5:2]][31:16] : atr_ram[adr_i[5:2]][15:0];
+   
+   always @(posedge clk_i)
+     ack_o <= stb_i & cyc_i & ~ack_o;
+
+   // Control side of DP RAM
+   assign     ctrl_lines = atr_ram[state];
+
+   // Put a more complex state machine with time delays and multiple states here
+   //  if daughterboard requires more complex sequencing
+   localparam ATR_IDLE = 4'd0;
+   localparam ATR_TX = 4'd1;
+   localparam ATR_RX = 4'd2;
+   localparam ATR_FULL_DUPLEX = 4'd3;
+   
+   always @(posedge clk_i)
+     if(rst_i)
+       state <= ATR_IDLE;
+     else
+       case ({run_rx,run_tx})
+	 2'b00 : state <= ATR_IDLE;
+	 2'b01 : state <= ATR_TX;
+	 2'b10 : state <= ATR_RX;
+	 2'b11 : state <= ATR_FULL_DUPLEX;
+       endcase // case({run_rx,run_tx})
+   
+endmodule // atr_controller16