zpu: renamed the directory for the usrp2 fw to zpu to reflect the cpu type

1 files changed, 121 insertions, 0 deletions

diff --git a/firmware/zpu/lib/eth_mac.c b/firmware/zpu/lib/eth_mac.c
new file mode 100644
index 000000000..581a5c69f
--- /dev/null
+++ b/firmware/zpu/lib/eth_mac.c
@@ -0,0 +1,121 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2007 Free Software Foundation, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "eth_mac.h"
+#include "memory_map.h"
+#include <stdbool.h>
+#include "eth_phy.h"	// for simulation constants
+#include "mdelay.h"
+#include "stdio.h"
+
+#define PHY_ADDR 1
+
+void
+eth_mac_set_addr(const eth_mac_addr_t *src)
+{
+  /* disable because MAC_SET_PASS_ALL is set below
+  eth_mac->ucast_hi = 
+    (((unsigned int)src->addr[0])<<8) + 
+    ((unsigned int)src->addr[1]);
+  eth_mac->ucast_lo = 
+    (((unsigned int)src->addr[2])<<24) + 
+    (((unsigned int)src->addr[3])<<16) +
+    (((unsigned int)src->addr[4])<<8) +
+    (((unsigned int)src->addr[5]));
+*/
+}
+
+
+void 
+eth_mac_init(const eth_mac_addr_t *src)
+{
+  eth_mac->miimoder = 25;	// divider from CPU clock (50MHz/25 = 2MHz)
+
+  eth_mac_set_addr(src);
+  eth_mac->settings = MAC_SET_PAUSE_EN | MAC_SET_PASS_BCAST | MAC_SET_PASS_UCAST | MAC_SET_PAUSE_SEND_EN | MAC_SET_PASS_ALL;
+
+  eth_mac->pause_time = 38;
+  eth_mac->pause_thresh = 1200;
+
+  // set rx flow control high and low water marks
+  // unsigned int lwmark = (2*2048 + 64)/4; // 2 * 2048-byte frames + 1 * 64-byte pause frame
+  // eth_mac->fc_hwmark = lwmark + 2048/4;  // plus a 2048-byte frame
+
+  //  eth_mac->fc_lwmark = 600;		// there are currently 2047 lines in the fifo
+  // eth_mac->fc_hwmark = 1200;
+  //eth_mac->fc_padtime = 1700;           // how long before flow control runs out do we 
+                                        // request a re-pause.  Units of 8ns (bytes)
+
+  //eth_mac->tx_pause_en = 0;		// pay attn to pause frames sent to us
+  //eth_mac->pause_quanta_set = 38;	// a bit more than 1 max frame 16kb/512 + fudge
+  //eth_mac->pause_frame_send_en = 0;	// enable sending pause frames
+}
+
+int
+eth_mac_read_rmon(int addr)
+{
+  int t = 0;
+  /*  
+  eth_mac->rmon_rd_addr = addr;
+  eth_mac->rmon_rd_apply = 1;
+  while(eth_mac->rmon_rd_grant == 0)
+    ;
+
+  t = eth_mac->rmon_rd_dout;
+  eth_mac->rmon_rd_apply = 0;
+  */
+  return t;
+}
+
+int
+eth_mac_miim_read(int addr)
+{
+
+  int phy_addr = PHY_ADDR;
+  eth_mac->miiaddress = ((addr & 0x1f) << 8) | phy_addr;
+  eth_mac->miicommand = MIIC_RSTAT;
+
+  while((eth_mac->miistatus & MIIS_BUSY) != 0)
+    ;
+
+  int r = eth_mac->miirx_data;
+  //printf("MIIM-READ ADDR 0x%x DATA 0x%x\n",addr, r);
+  return r;
+}
+
+void
+eth_mac_miim_write(int addr, int value)
+{
+  int phy_addr = PHY_ADDR;
+  eth_mac->miiaddress = ((addr & 0x1f) << 8) | phy_addr;
+  eth_mac->miitx_data = value;
+  eth_mac->miicommand = MIIC_WCTRLDATA;
+
+//  printf("MIIM-WRITE ADDR 0x%x VAL 0x%x\n",addr,value);
+  while((eth_mac->miistatus & MIIS_BUSY) != 0)
+    ;
+}
+
+int
+eth_mac_miim_read_status(void)
+{
+  if (hwconfig_simulation_p())
+    return 0;
+
+  return eth_mac->miistatus;
+}