zpu: renamed the directory for the usrp2 fw to zpu to reflect the cpu type

1 files changed, 376 insertions, 0 deletions

diff --git a/firmware/zpu/apps/cruft/mimo_tx_slave.c b/firmware/zpu/apps/cruft/mimo_tx_slave.c
new file mode 100644
index 000000000..cdf9c03c2
--- /dev/null
+++ b/firmware/zpu/apps/cruft/mimo_tx_slave.c
@@ -0,0 +1,376 @@
+/*
+ * Copyright 2007,2008,2009 Free Software Foundation, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This is a down and dirty test program that confirms that the we can
+ * coherently transmit different signals to two USRP2s connected via a
+ * mimo cable.  This code runs in the USRP2 NOT connected to the
+ * ethernet.  The USRP connected to the ethernet runs mimo_tx.  The
+ * host runs test_mimo_tx.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "u2_init.h"
+#include "memory_map.h"
+#include "spi.h"
+#include "hal_io.h"
+#include "buffer_pool.h"
+#include "pic.h"
+#include <stdbool.h>
+#include "ethernet.h"
+#include "nonstdio.h"
+#include "usrp2_eth_packet.h"
+#include "dbsm.h"
+#include "app_common_v2.h"
+#include "memcpy_wa.h"
+#include "clocks.h"
+#include <stddef.h>
+#include <stdlib.h>
+#include <string.h>
+
+
+#define FW_SETS_SEQNO	1	// define to 0 or 1 (FIXME must be 1 for now)
+
+#if (FW_SETS_SEQNO)
+static int fw_seqno;	// used when f/w is filling in sequence numbers
+#endif
+
+
+/*
+ * Full duplex Tx and Rx between serdes and DSP pipelines
+ *
+ * Buffer 1 is used by the cpu to send frames to the host.
+ * Buffers 2 and 3 are used to double-buffer the DSP Rx to serdes flow
+ * Buffers 4 and 5 are used to double-buffer the serdes to DSP Tx flow
+ */
+//#define CPU_RX_BUF	0	// eth -> cpu
+
+#define	DSP_RX_BUF_0	2	// dsp rx -> serdes (double buffer)
+#define	DSP_RX_BUF_1	3	// dsp rx -> serdes
+#define	DSP_TX_BUF_0	4	// serdes -> dsp tx (double buffer)
+#define	DSP_TX_BUF_1	5	// serdes -> dsp tx
+
+/*
+ * ==================================================================
+ *   configure DSP TX double buffering state machine (serdes -> dsp)
+ * ==================================================================
+ */
+
+// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp)
+// DSP Tx reads word0 (flags) + timestamp followed by samples
+
+#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4)
+
+// Receive from serdes
+buf_cmd_args_t dsp_tx_recv_args = {
+  PORT_SERDES,
+  0,
+  BP_LAST_LINE
+};
+
+// send to DSP Tx
+buf_cmd_args_t dsp_tx_send_args = {
+  PORT_DSP,
+  DSP_TX_FIRST_LINE,	// starts just past transport header
+  0			// filled in from last_line register
+};
+
+dbsm_t dsp_tx_sm;	// the state machine
+
+/*
+ * =================================================================
+ *   configure DSP RX double buffering state machine (dsp -> serdes)
+ * =================================================================
+ */
+
+// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0)
+// DSP Rx writes timestamp followed by nlines_per_frame of samples
+#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4 + 1)
+
+// receive from DSP
+buf_cmd_args_t dsp_rx_recv_args = {
+  PORT_DSP,
+  DSP_RX_FIRST_LINE,
+  BP_LAST_LINE
+};
+
+// send to serdes
+buf_cmd_args_t dsp_rx_send_args = {
+  PORT_SERDES,
+  0,		// starts with ethernet header in line 0
+  0,		// filled in from list_line register
+};
+
+dbsm_t dsp_rx_sm;	// the state machine
+
+
+// The mac address of the host we're sending to.
+eth_mac_addr_t host_mac_addr;
+
+
+// variables for streaming mode
+
+static bool         streaming_p = false;
+static unsigned int streaming_items_per_frame = 0;
+static int          streaming_frame_count = 0;
+#define FRAMES_PER_CMD	1000
+
+bool is_streaming(void){ return streaming_p; }
+
+// ----------------------------------------------------------------
+
+
+void
+restart_streaming(void)
+{
+  // setup RX DSP regs
+  dsp_rx_regs->clear_state = 1;			// reset
+
+  streaming_p = true;
+  streaming_frame_count = FRAMES_PER_CMD;
+
+  dsp_rx_regs->rx_command =
+    MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame,
+	      streaming_items_per_frame,
+	      1, 1);			// set "chain" bit
+
+  // kick off the state machine
+  dbsm_start(&dsp_rx_sm);
+
+  dsp_rx_regs->rx_time = 0;		// enqueue first of two commands
+
+  // make sure this one and the rest have the "now" and "chain" bits set.
+  dsp_rx_regs->rx_command =
+    MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame,
+	      streaming_items_per_frame,
+	      1, 1);				
+
+  dsp_rx_regs->rx_time = 0;		// enqueue second command
+}
+
+void
+start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p)
+{
+  host_mac_addr = *host;	// remember who we're sending to
+
+  /*
+   * Construct  ethernet header and word0 and preload into two buffers
+   */
+  u2_eth_packet_t	pkt;
+  memset(&pkt, 0, sizeof(pkt));
+  pkt.ehdr.dst = *host;
+  pkt.ehdr.src = *ethernet_mac_addr();
+  pkt.ehdr.ethertype = U2_ETHERTYPE;
+  u2p_set_word0(&pkt.fixed, 0, 0);
+  // DSP RX will fill in timestamp
+
+  memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt));
+  memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt));
+
+
+  if (FW_SETS_SEQNO)
+    fw_seqno = 0;
+
+  streaming_items_per_frame = p->items_per_frame;
+  restart_streaming();
+}
+
+
+void
+stop_rx_cmd(void)
+{
+  streaming_p = false;
+  dsp_rx_regs->clear_state = 1;	// flush cmd queue
+  bp_clear_buf(DSP_RX_BUF_0);
+  bp_clear_buf(DSP_RX_BUF_1);
+}
+
+
+static void
+setup_tx()
+{
+  dsp_tx_regs->clear_state = 1;
+  bp_clear_buf(DSP_TX_BUF_0);
+  bp_clear_buf(DSP_TX_BUF_1);
+
+  int tx_scale = 2500;
+  int interp = 8;		// * 4
+
+  // setup some defaults
+
+  dsp_tx_regs->freq = 429496730;	// 10MHz
+  dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale;
+  dsp_tx_regs->interp_rate = (1 << 9) | (1 << 8) | interp;
+}
+
+
+#if (FW_SETS_SEQNO)
+/*
+ * Debugging ONLY.  This will be handled by the tx_protocol_engine.
+ *
+ * This is called when the DSP Rx chain has filled in a packet.
+ * We set and increment the seqno, then return false, indicating
+ * that we didn't handle the packet.  A bit of a kludge
+ * but it should work.
+ */
+bool 
+fw_sets_seqno_inspector(dbsm_t *sm, int buf_this)	// returns false
+{
+  uint32_t *p = buffer_ram(buf_this);
+  uint32_t seqno = fw_seqno++;
+
+  // KLUDGE all kinds of nasty magic numbers and embedded knowledge
+  uint32_t t = p[4];
+  t = (t & 0xffff00ff) | ((seqno & 0xff) << 8);
+  p[4] = t;
+
+  // queue up another rx command when required
+  if (streaming_p && --streaming_frame_count == 0){
+    streaming_frame_count = FRAMES_PER_CMD;
+    dsp_rx_regs->rx_time = 0;
+  }
+
+  return false;		// we didn't handle the packet
+}
+#endif
+
+
+inline static void
+buffer_irq_handler(unsigned irq)
+{
+  // hal_toggle_leds(LED_A);
+
+  uint32_t  status = buffer_pool_status->status;
+
+  if (0 && (status & ~BPS_IDLE_ALL)){
+    putstr("status = ");
+    puthex32_nl(status);
+  }
+
+  dbsm_process_status(&dsp_tx_sm, status);
+  dbsm_process_status(&dsp_rx_sm, status);
+}
+
+int
+main(void)
+{
+  u2_init();
+
+  output_regs->led_src = 0x3;		// h/w controls bottom two bits
+  clocks_enable_test_clk(true, 1);
+
+  putstr("\nMIMO Tx Slave\n");
+
+  cpu_tx_buf_dest_port = PORT_SERDES;
+
+  // ethernet_register_link_changed_callback(link_changed_callback);
+  // ethernet_init();
+
+  clocks_mimo_config(MC_WE_LOCK_TO_MIMO);
+
+  // puts("post clocks_mimo_config");
+
+#if 0
+  // make bit 15 of Tx gpio's be a s/w output
+  hal_gpio_set_sel(GPIO_TX_BANK, 15, 's');
+  hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000);
+#endif
+
+#if 0
+  output_regs->debug_mux_ctrl = 1;
+  hal_gpio_set_sels(GPIO_TX_BANK, "0000000000000000");
+  hal_gpio_set_sels(GPIO_RX_BANK, "0000000000000000");
+  hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff);
+  hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff);
+#endif
+
+
+  // initialize double buffering state machine for ethernet -> DSP Tx
+
+  dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0,
+	    &dsp_tx_recv_args, &dsp_tx_send_args,
+	    eth_pkt_inspector);
+
+
+  //output_regs->flush_icache = 1;
+ 
+  // initialize double buffering state machine for DSP RX -> Ethernet
+
+  if (FW_SETS_SEQNO){
+    dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0,
+	      &dsp_rx_recv_args, &dsp_rx_send_args,
+	      fw_sets_seqno_inspector);
+  }
+  else {
+    dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0,
+	      &dsp_rx_recv_args, &dsp_rx_send_args,
+	      dbsm_nop_inspector);
+  }
+
+  // puts("post dbsm_init's");
+
+  // tell app_common that this dbsm could be sending to the ethernet
+  ac_could_be_sending_to_eth = &dsp_rx_sm;
+
+
+  // program tx registers
+  setup_tx();
+
+  // puts("post setup_tx");
+
+  // kick off the state machine
+  dbsm_start(&dsp_tx_sm);
+
+  // puts("post dbsm_start");
+
+  //int which = 0;
+
+  while(1){
+    // hal_gpio_write(GPIO_TX_BANK, which, 0x8000);
+    // which ^= 0x8000;
+
+    buffer_irq_handler(0);
+
+    int pending = pic_regs->pending;		// poll for under or overrun
+
+    if (pending & PIC_UNDERRUN_INT){
+      dbsm_handle_tx_underrun(&dsp_tx_sm);
+      pic_regs->pending = PIC_UNDERRUN_INT;	// clear interrupt
+      putchar('U');
+    }
+
+    if (pending & PIC_OVERRUN_INT){
+      dbsm_handle_rx_overrun(&dsp_rx_sm);
+      pic_regs->pending = PIC_OVERRUN_INT;	// clear pending interrupt
+
+      // FIXME Figure out how to handle this robustly.
+      // Any buffers that are emptying should be allowed to drain...
+
+      if (streaming_p){
+	// restart_streaming();
+	// FIXME report error
+      }
+      else {
+	// FIXME report error
+      }
+      putchar('O');
+    }
+  }
+}