Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into flow_ctrl

Conflicts:
	host/lib/transport/udp_simple.cpp
	host/lib/usrp/usrp2/mboard_impl.cpp
	host/lib/usrp/usrp2/usrp2_iface.cpp
	host/lib/usrp/usrp2/usrp2_regs.hpp

1 files changed, 64 insertions, 30 deletions

diff --git a/firmware/microblaze/lib/hal_uart.c b/firmware/microblaze/lib/hal_uart.c
index fe3b7515a..7836240fe 100644
--- a/firmware/microblaze/lib/hal_uart.c
+++ b/firmware/microblaze/lib/hal_uart.c
@@ -16,71 +16,105 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include "memory_map.h"
 #include "hal_uart.h"
 #include "hal_io.h"
-#include "memory_map.h"
+#include "mdelay.h"
 
-// First pass, no interrupts
-
-// Replaced with divisors.py which generates best divisor
-//#define CALC_DIVISOR(rate) (WISHBONE_CLK_RATE / ((rate) * 16))
+//just to save you from going insane, note that firmware/FPGA UARTs [0-2] correspond to serial ports [1-3].
+//so in software, we refer to UART_DEBUG as UART0, but it transmits on pin TXD<1>. see the UART assignments in hal_uart.h.
 
 #define NSPEEDS 6
 #define	MAX_WB_DIV 4
 
+//if you're going to recalculate the divisors, it's just uart_clock_rate / baud_rate.
+//uart_clock_rate is 50MHz for USRP2.
 static const uint16_t
-divisor_table[MAX_WB_DIV+1][NSPEEDS] = {
-  {   2,   2,   2,   2,  2,  2},   // 0: can't happen
-  { 651, 326, 163, 109, 54, 27 },  // 1: 100 MHz
-  { 326, 163,  81,  54, 27, 14 },  // 2:  50 MHz
-  { 217, 109,  54,  36, 18,  9 },  // 3:  33.3333 MHz
-  { 163,  81,  41,  27, 14,  7 },  // 4:  25 MHz
+divisor_table[NSPEEDS] = {
+  5208,	//    9600
+  2604,	//   19200
+  1302,	//   38400
+  868,	//   57600
+  434,	//  115200
+  217	//  230400
 };
 
-#define u uart_regs
+static char uart_mode[4] = {
+  [UART_DEBUG] = UART_MODE_ONLCR, 
+  [UART_EXP] = UART_MODE_ONLCR, 
+  [UART_GPS] = UART_MODE_ONLCR
+};
 
-static char uart_mode = UART_MODE_ONLCR;
+static char uart_speeds[4] = {
+  [UART_DEBUG] = US_230400,
+  [UART_EXP] = US_230400,
+  [UART_GPS] = US_115200
+};
 
 void
-hal_uart_set_mode(int mode)
+hal_uart_set_mode(hal_uart_name_t uart, int mode)
+{
+  uart_mode[uart] = mode;
+}
+
+void hal_uart_set_speed(hal_uart_name_t uart, hal_uart_speed_t speed)
 {
-  uart_mode = mode;
+  uart_regs[uart].clkdiv = divisor_table[speed];
 }
 
 void
 hal_uart_init(void)
 {
-	hal_uart_set_mode(UART_MODE_ONLCR);
-  u->clkdiv = 217;  // 230400 bps
+  for(int i = 0; i < 3; i++) {
+  	hal_uart_set_mode(i, uart_mode[i]);
+    hal_uart_set_speed(i, uart_speeds[i]);
+  }
 }
 
 void
-hal_uart_putc(int ch)
+hal_uart_putc(hal_uart_name_t u, int ch)
 {
-  if (ch == '\n')// && (uart_mode == UART_MODE_ONLCR))		//map \n->\r\n if necessary
-    hal_uart_putc('\r');
+  if ((ch == '\n') && (uart_mode[u] == UART_MODE_ONLCR))		//map \n->\r\n if necessary
+    hal_uart_putc(u, '\r');
 
-  while (u->txlevel == 0)	 // wait for fifo to have space
+  while (uart_regs[u].txlevel == 0)	 // wait for fifo to have space
     ;
 
-  u->txchar = ch;
+  uart_regs[u].txchar = ch;
 }
 
 void
-hal_uart_putc_nowait(int ch)
+hal_uart_putc_nowait(hal_uart_name_t u, int ch)
 {
-  if (ch == '\n')// && (uart_mode == UART_MODE_ONLCR))		//map \n->\r\n if necessary
-    hal_uart_putc('\r');
+  if ((ch == '\n') && (uart_mode[u] == UART_MODE_ONLCR))		//map \n->\r\n if necessary
+    hal_uart_putc(u, '\r');
 
-  if(u->txlevel)   // If fifo has space
-    u->txchar = ch;
+  if(uart_regs[u].txlevel)   // If fifo has space
+    uart_regs[u].txchar = ch;
 }
 
 int
-hal_uart_getc(void)
+hal_uart_getc(hal_uart_name_t u)
 {
-  while ((u->rxlevel) == 0)  // wait for data to be ready
+  while ((uart_regs[u].rxlevel) == 0)  // wait for data to be ready
     ;
 
-  return u->rxchar;
+  return uart_regs[u].rxchar;
 }
+
+int 
+hal_uart_getc_timeout(hal_uart_name_t u)
+{
+  int timeout = 0;
+  while (((uart_regs[u].rxlevel) == 0) && (timeout++ < HAL_UART_TIMEOUT_MS))
+    mdelay(1);
+  return (timeout >= HAL_UART_TIMEOUT_MS) ? -1 : uart_regs[u].rxchar; //return -1 if nothing there, cause fngets to quit
+}
+
+int hal_uart_rx_flush(hal_uart_name_t u)
+{
+  char x;
+  while(uart_regs[u].rxlevel) x = uart_regs[u].rxchar;
+  return x;
+}
+