usrp1: pulled in cmake build system for usrp1 firmware

46 files changed, 0 insertions, 4733 deletions

diff --git a/firmware/fx2/src/.gitignore b/firmware/fx2/src/.gitignore
deleted file mode 100644
index d46c52c00..000000000
--- a/firmware/fx2/src/.gitignore
+++ /dev/null
@@ -1,17 +0,0 @@
-/*.ihx
-/*.lnk
-/*.lst
-/*.map
-/*.mem
-/*.rel
-/*.rst
-/*.sym
-/blink_leds.asm
-/usrp_common.asm
-/command_loop.asm
-/fpga.asm
-/*.asm
-/usrp_gpif.c
-/usrp_gpif_inline.h
-/Makefile
-/Makefile.in
diff --git a/firmware/fx2/src/Makefile.am b/firmware/fx2/src/Makefile.am
deleted file mode 100644
index 5dcff2c85..000000000
--- a/firmware/fx2/src/Makefile.am
+++ /dev/null
@@ -1,22 +0,0 @@
-#
-# Copyright 2004 Free Software Foundation, Inc.
-# 
-# This file is part of GNU Radio
-# 
-# GNU Radio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-# 
-# GNU Radio is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with GNU Radio; see the file COPYING.  If not, write to
-# the Free Software Foundation, Inc., 51 Franklin Street,
-# Boston, MA 02110-1301, USA.
-# 
-
-SUBDIRS = common usrp1
diff --git a/firmware/fx2/src/common/.gitignore b/firmware/fx2/src/common/.gitignore
deleted file mode 100644
index d46c52c00..000000000
--- a/firmware/fx2/src/common/.gitignore
+++ /dev/null
@@ -1,17 +0,0 @@
-/*.ihx
-/*.lnk
-/*.lst
-/*.map
-/*.mem
-/*.rel
-/*.rst
-/*.sym
-/blink_leds.asm
-/usrp_common.asm
-/command_loop.asm
-/fpga.asm
-/*.asm
-/usrp_gpif.c
-/usrp_gpif_inline.h
-/Makefile
-/Makefile.in
diff --git a/firmware/fx2/src/common/Makefile.am b/firmware/fx2/src/common/Makefile.am
deleted file mode 100644
index 95232324d..000000000
--- a/firmware/fx2/src/common/Makefile.am
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# Copyright 2004 Free Software Foundation, Inc.
-# 
-# This file is part of GNU Radio
-# 
-# GNU Radio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-# 
-# GNU Radio is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with GNU Radio; see the file COPYING.  If not, write to
-# the Free Software Foundation, Inc., 51 Franklin Street,
-# Boston, MA 02110-1301, USA.
-# 
-
-EXTRA_DIST = 			\
-	_startup.a51		\
-	blink_leds.c		\
-	check_mdelay.c		\
-	check_udelay.c		\
-	edit-gpif		\
-	fpga.h			\
-	fpga_load.h		\
-	fpga_load.c		\
-	gpif.c			\
-	gpif.gpf		\
-	init_gpif.c		\
-	usrp_common.c		\
-	usrp_globals.h		\
-	vectors.a51		\
-	build_eeprom.py		
-
-all: usrp_gpif.c
-
-usrp_gpif.c usrp_gpif_inline.h : gpif.c
-	srcdir=$(srcdir) $(PYTHON) $(srcdir)/edit-gpif $(srcdir)/gpif.c usrp_gpif.c usrp_gpif_inline.h
-
-CLEANFILES = \
-	*.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib \
-	usrp_gpif.c usrp_gpif_inline.h
-
-DISTCLEANFILES = \
-	*.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib \
-	usrp_gpif.c usrp_gpif_inline.h 
diff --git a/firmware/fx2/src/common/_startup.a51 b/firmware/fx2/src/common/_startup.a51
deleted file mode 100644
index 30a907857..000000000
--- a/firmware/fx2/src/common/_startup.a51
+++ /dev/null
@@ -1,80 +0,0 @@
-;;; -*- asm -*-
-;;;
-;;; Copyright 2003,2004 Free Software Foundation, Inc.
-;;; 
-;;; This file is part of GNU Radio
-;;; 
-;;; GNU Radio is free software; you can redistribute it and/or modify
-;;; it under the terms of the GNU General Public License as published by
-;;; the Free Software Foundation; either version 3, or (at your option)
-;;; any later version.
-;;; 
-;;; GNU Radio is distributed in the hope that it will be useful,
-;;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-;;; GNU General Public License for more details.
-;;; 
-;;; You should have received a copy of the GNU General Public License
-;;; along with GNU Radio; see the file COPYING.  If not, write to
-;;; the Free Software Foundation, Inc., 51 Franklin Street,
-;;; Boston, MA 02110-1301, USA.
-
-    
-;;; The default external memory initialization provided by sdcc is not
-;;; appropriate to the FX2.  This is derived from the sdcc code, but uses 
-;;; the FX2 specific _MPAGE sfr.
-
-
-	;; .area XISEG   (XDATA)  ; the initialized external data area
-	;; .area XINIT   (CODE)	  ; the code space consts to init XISEG
-	.area XSEG    (XDATA)	  ; zero initialized xdata
-	.area USBDESCSEG (XDATA)  ; usb descriptors
-
-	
-	.area CSEG    (CODE)
-
-	;; sfr that sets upper address byte of MOVX using @r0 or @r1
-	_MPAGE	=	0x0092
-
-__sdcc_external_startup::
-	;; This system is now compiled with the --no-xinit-opt 
-	;; which means that any initialized XDATA is handled
-	;; inline by code in the GSINIT segs emitted for each file.
-	;; 
-	;; We zero XSEG and all of the internal ram to ensure 
-	;; a known good state for uninitialized variables.
-
-;	_mcs51_genRAMCLEAR() start
-	mov	r0,#l_XSEG
-	mov	a,r0
-	orl	a,#(l_XSEG >> 8)
-	jz	00002$
-	mov	r1,#((l_XSEG + 255) >> 8)
-	mov	dptr,#s_XSEG
-	clr     a
-	
-00001$:	movx	@dptr,a
-	inc	dptr
-	djnz	r0,00001$
-	djnz	r1,00001$
-	
-	;; We're about to clear internal memory.  This will overwrite
-	;; the stack which contains our return address.
-	;; Pop our return address into DPH, DPL
-00002$:	pop	dph
-	pop	dpl
-	
-	;; R0 and A contain 0.  This loop will execute 256 times.
-	;; 
-	;; FWIW the first iteration writes direct address 0x00,
-	;; which is the location of r0.  We get lucky, we're 
-	;; writing the correct value (0)
-	
-00003$:	mov	@r0,a
-	djnz	r0,00003$
-
-	push	dpl		; restore our return address
-	push	dph
-
-	mov	dpl,#0		; indicate that data init is still required
-	ret
diff --git a/firmware/fx2/src/common/_startup.a51.brittle b/firmware/fx2/src/common/_startup.a51.brittle
deleted file mode 100644
index 2996275cf..000000000
--- a/firmware/fx2/src/common/_startup.a51.brittle
+++ /dev/null
@@ -1,78 +0,0 @@
-;;; -*- asm -*-
-;;;
-;;; Copyright 2003 Free Software Foundation, Inc.
-;;; 
-;;; This file is part of GNU Radio
-;;; 
-;;; GNU Radio is free software; you can redistribute it and/or modify
-;;; it under the terms of the GNU General Public License as published by
-;;; the Free Software Foundation; either version 3, or (at your option)
-;;; any later version.
-;;; 
-;;; GNU Radio is distributed in the hope that it will be useful,
-;;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-;;; GNU General Public License for more details.
-;;; 
-;;; You should have received a copy of the GNU General Public License
-;;; along with GNU Radio; see the file COPYING.  If not, write to
-;;; the Free Software Foundation, Inc., 51 Franklin Street,
-;;; Boston, MA 02110-1301, USA.
-
-    
-;;; The default external memory initialization provided by sdcc is not
-;;; appropriate to the FX2.  This is derived from the sdcc code, but uses 
-;;; the FX2 specific _MPAGE sfr.
-
-
-	.area XISEG   (XDATA)	; the initialized external data area
-	.area XINIT   (CODE)	; the code space consts to init XISEG
-	.area XSEG    (XDATA)	; zero initialized xdata
-	.area USBDESCSEG (XDATA); usb descriptors
-
-	
-	;; BIG TIME KLUDGE!
-	;; Look at usrp_main.rst and count the bytes from our
-	;; "normal return location" to the first instruction following
-	;; the comment:	"_mcs51_getRAMCLEAR () start"
-	
-	INSTRUCTION_BYTES_TO_SKIP = 0x29	 ; valid for sdcc 2.4.0 
-	
-
-	.area CSEG    (CODE)
-
-	;; sfr that sets upper address byte of MOVX using @r0 or @r1
-	_MPAGE	=	0x0092
-
-__sdcc_external_startup::
-;	_mcs51_genXINIT() start
-	mov	r1,#l_XINIT
-	mov	a,r1
-	orl	a,#(l_XINIT >> 8)
-	jz	00003$
-	mov	r2,#((l_XINIT+255) >> 8)
-	mov	dptr,#s_XINIT
-	mov	r0,#s_XISEG
-	mov	_MPAGE,#(s_XISEG >> 8)
-00001$:	clr	a
-	movc	a,@a+dptr
-	movx	@r0,a
-	inc	dptr
-	inc	r0
-	cjne	r0,#0,00002$
-	inc	_MPAGE
-00002$:	djnz	r1,00001$
-	djnz	r2,00001$
-	mov	_MPAGE,#0xFF
-00003$:
-
-	;; Danger! Total KLUDGE!
-	;; We pop the return address, add a magic number to it
-	;; then jump to that address.  Believe it or not, this
-	;; looks like the least kludgy way to handle this,
-	;; short of patching the compiler...
-
-	pop	dph
-	pop	dpl
-	mov	a,#INSTRUCTION_BYTES_TO_SKIP
-	jmp	@a+dptr
diff --git a/firmware/fx2/src/common/blink_leds.c b/firmware/fx2/src/common/blink_leds.c
deleted file mode 100644
index 255c69733..000000000
--- a/firmware/fx2/src/common/blink_leds.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#include "usrp_common.h"
-
-void
-main (void)
-{
-  unsigned short	counter = 0;
-
-  init_usrp ();
-
-  while (1){
-    unsigned char counter_high = counter >> 8;
-    set_led_0 (counter_high & 0x40);
-    set_led_1 (counter_high & 0x80);
-    counter++;
-  }
-}
diff --git a/firmware/fx2/src/common/build_eeprom.py b/firmware/fx2/src/common/build_eeprom.py
deleted file mode 100755
index ae62587db..000000000
--- a/firmware/fx2/src/common/build_eeprom.py
+++ /dev/null
@@ -1,107 +0,0 @@
-#!/usr/bin/env python
-#
-# Copyright 2004,2006 Free Software Foundation, Inc.
-# 
-# This file is part of GNU Radio
-# 
-# GNU Radio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-# 
-# GNU Radio is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with GNU Radio; see the file COPYING.  If not, write to
-# the Free Software Foundation, Inc., 51 Franklin Street,
-# Boston, MA 02110-1301, USA.
-# 
-
-import re
-import sys
-import os, os.path
-from optparse import OptionParser
-
-# USB Vendor and Product ID's
-
-VID = 0xfffe                            # Free Software Folks
-PID = 0x0002                            # Universal Software Radio Peripheral
-    
-def msb (x):
-    return (x >> 8) & 0xff
-
-def lsb (x):
-    return x & 0xff
-
-def build_eeprom_image (filename, rev):
-    """Build a ``C2 Load'' EEPROM image.
-
-    For details on this format, see section 3.4.3 of
-    the EZ-USB FX2 Technical Reference Manual
-    """
-    # get the code we want to run
-    f = open(filename, 'rb')
-    bytes = f.read()
-
-    devid = rev
-    start_addr = 0 #prove me wrong
-
-    rom_header = [
-        0xC2,                           # boot from EEPROM
-        lsb (VID),
-        msb (VID),
-        lsb (PID),
-        msb (PID),
-        lsb (devid),
-        msb (devid),
-        0                               # configuration byte
-        ]
-    
-    # 4 byte header that indicates where to load
-    # the immediately follow code bytes.
-    code_header = [
-        msb (len (bytes)),
-        lsb (len (bytes)),
-        msb (start_addr),
-        lsb (start_addr)
-        ]
-
-    # writes 0 to CPUCS reg (brings FX2 out of reset)
-    trailer = [
-        0x80,
-        0x01,
-        0xe6,
-        0x00,
-        0x00
-        ]
-
-    image = rom_header + code_header + [ord(c) for c in bytes] + trailer
-
-    assert (len (image) <= 256)
-    return image 
-
-if __name__ == '__main__':
-    usage = "usage: %prog -r REV [options] bootfile.bin outfile.bin"
-    parser = OptionParser (usage=usage)
-    parser.add_option ("-r", "--rev", type="int", default=-1,
-                       help="Specify USRP revision number REV (2 or 4)")
-    (options, args) = parser.parse_args ()
-    if len (args) != 2:
-        parser.print_help ()
-        sys.exit (1)
-    if options.rev < 0:
-        sys.stderr.write (
-            "You must specify the USRP revision number (2 or 4) with -r REV\n")
-        sys.exit (1)
-
-    infile = args[0]
-    outfile = args[1]
-
-    image = "".join(chr(c) for c in build_eeprom_image(infile, options.rev))
-
-    f = open(outfile, 'wb')
-    f.write(str(image))
-    f.close()  
diff --git a/firmware/fx2/src/common/check_mdelay.c b/firmware/fx2/src/common/check_mdelay.c
deleted file mode 100644
index de1af47f6..000000000
--- a/firmware/fx2/src/common/check_mdelay.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#include "usrp_common.h"
-#include "delay.h"
-
-void
-main (void)
-{
-  init_usrp ();
-
-  // CPUCS = 0;		// 12 MHz
-  // CPUCS = bmCLKSPD0;	// 24 MHz
-  CPUCS = bmCLKSPD1;	// 48 MHz
-  
-  while (1){
-    USRP_LED_REG ^= bmLED0;
-    mdelay (10);
-  }
-}
diff --git a/firmware/fx2/src/common/check_udelay.c b/firmware/fx2/src/common/check_udelay.c
deleted file mode 100644
index 46885a067..000000000
--- a/firmware/fx2/src/common/check_udelay.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#include "usrp_common.h"
-#include "delay.h"
-
-void
-main (void)
-{
-  init_usrp ();
-
-  // CPUCS = 0;		// 12 MHz
-  // CPUCS = bmCLKSPD0;	// 24 MHz
-  CPUCS = bmCLKSPD1;	// 48 MHz
-  
-  while (1){
-    USRP_LED_REG ^= bmLED0;
-    udelay (250);
-  }
-}
diff --git a/firmware/fx2/src/common/edit-gpif b/firmware/fx2/src/common/edit-gpif
deleted file mode 100755
index 5367b75a5..000000000
--- a/firmware/fx2/src/common/edit-gpif
+++ /dev/null
@@ -1,114 +0,0 @@
-#!/usr/bin/env python
-# -*- Python -*-
-#
-# Copyright 2003 Free Software Foundation, Inc.
-# 
-# This file is part of GNU Radio
-# 
-# GNU Radio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-# 
-# GNU Radio is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with GNU Radio; see the file COPYING.  If not, write to
-# the Free Software Foundation, Inc., 51 Franklin Street,
-# Boston, MA 02110-1301, USA.
-# 
-
-
-# Edit the gpif.c file generated by the Cypress GPIF Designer Tool and
-# produce usrp_gpif.c, and usrp_gpif_inline.h, files suitable for our
-# uses.
-
-import re
-import string
-import sys
-
-def check_flow_state (line, flow_state_dict):
-    mo = re.match (r'/\* Wave (\d) FlowStates \*/ (.*),', line)
-    if mo:
-        wave = int (mo.group (1))
-        data = mo.group (2)
-        split = data.split (',', 8)
-        v = map (lambda x : int (x, 16), split)
-        # print "%s, %s" % (wave, data)
-        # print "split: ", split
-        # print "v    : ", v
-        flow_state_dict[wave] = v
-
-
-def delta (xseq, yseq):
-    # set subtraction
-    z = []
-    for x in xseq:
-        if x not in yseq:
-            z.append (x)
-    return z
-    
-
-def write_define (output, name, pairs):
-    output.write ('#define %s()\t\\\n' % name)
-    output.write ('do {\t\t\t\t\t\\\n')
-    for reg, val in pairs:
-        output.write ('%14s = 0x%02x;\t\t\t\\\n' % (reg, val))
-    output.write ('} while (0)\n\n')
-    
-def write_inlines (output, dict):
-    regs = ['FLOWSTATE', 'FLOWLOGIC', 'FLOWEQ0CTL', 'FLOWEQ1CTL', 'FLOWHOLDOFF',
-            'FLOWSTB', 'FLOWSTBEDGE', 'FLOWSTBHPERIOD', 'GPIFHOLDAMOUNT']
-
-    READ_FLOW_STATE = 2
-    WRITE_FLOW_STATE = 3
-
-    read_info = zip (regs, dict[READ_FLOW_STATE])
-    write_info = zip (regs, dict[WRITE_FLOW_STATE])
-    
-    output.write ('''/*
- * Machine generated by "edit-gpif".  Do not edit by hand.
- */
-
-''')
-    write_define (output, 'setup_flowstate_common', read_info)
-    write_define (output, 'setup_flowstate_read', delta (read_info, write_info))
-    write_define (output, 'setup_flowstate_write', delta (write_info, read_info))
-    
-
-def edit_gpif (input_name, output_name, inline_name):
-    input = open (input_name, 'r')
-    output = open (output_name, 'w')
-    inline = open (inline_name, 'w')
-    flow_state_dict = {}
-
-    output.write ('''/*
- * Machine generated by "edit-gpif".  Do not edit by hand.
- */
-
-''')
-    
-    while 1:
-        line = input.readline ()
-        line = string.replace (line, '\r','')
-        line = re.sub (r' *$', r'', line)
-
-        check_flow_state (line, flow_state_dict)
-
-        line = re.sub (r'#include', r'// #include', line)
-        line = re.sub (r'xdata ', r'', line)
-        if re.search (r'GpifInit', line):
-            break
-        
-        output.write (line)
-
-    output.close ()
-    write_inlines (inline, flow_state_dict)
-    inline.close ()
-
-
-# gpif.c usrp_gpif.c usrp_gpif_inline.h
-edit_gpif (sys.argv[1], sys.argv[2], sys.argv[3])
diff --git a/firmware/fx2/src/common/fpga.h b/firmware/fx2/src/common/fpga.h
deleted file mode 100644
index 6cd5de8e2..000000000
--- a/firmware/fx2/src/common/fpga.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2004 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-#ifndef INCLUDED_FPGA_H
-#define INCLUDED_FPGA_H
-
-#include "fpga_load.h"
-
-#if defined(HAVE_USRP2)
-#include "fpga_rev2.h"
-#endif
-
-#endif /* INCLUDED_FPGA_H */
diff --git a/firmware/fx2/src/common/fpga_load.c b/firmware/fx2/src/common/fpga_load.c
deleted file mode 100644
index c3ae9e707..000000000
--- a/firmware/fx2/src/common/fpga_load.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#include "usrp_common.h"
-#include "fpga_load.h"
-#include "delay.h"
-
-/*
- * setup altera FPGA serial load (PS).
- *
- * On entry:
- *	don't care
- *
- * On exit:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- */
-unsigned char
-fpga_load_begin (void)
-{
-  USRP_ALTERA_CONFIG &= ~bmALTERA_BITS;		// clear all bits (NCONFIG low)
-  udelay (40);					// wait 40 us
-  USRP_ALTERA_CONFIG |= bmALTERA_NCONFIG;	// set NCONFIG high
-
-  if (UC_BOARD_HAS_FPGA){
-    // FIXME should really cap this loop with a counter so we
-    //   don't hang forever on a hardware failure.
-    while ((USRP_ALTERA_CONFIG & bmALTERA_NSTATUS) == 0) // wait for NSTATUS to go high
-      ;
-  }
-
-  // ready to xfer now
-
-  return 1;
-}
-
-/*
- * clock out the low bit of bits.
- *
- * On entry:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- *
- * On exit:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- */
-
-
-#if 0
-
-static void
-clock_out_config_byte (unsigned char bits)
-{
-  unsigned char i;
-
-  // clock out configuration byte, least significant bit first
-
-  for (i = 0; i < 8; i++){
-
-    USRP_ALTERA_CONFIG = ((USRP_ALTERA_CONFIG & ~bmALTERA_DATA0) | ((bits & 1) ? bmALTERA_DATA0 : 0));
-    USRP_ALTERA_CONFIG |= bmALTERA_DCLK;		/* set DCLK to 1 */
-    USRP_ALTERA_CONFIG &= ~bmALTERA_DCLK;		/* set DCLK to 0 */
-
-    bits = bits >> 1;
-  }
-}
-	
-#else
-
-static void 
-clock_out_config_byte (unsigned char bits) _naked
-{
-    _asm
-	mov	a, dpl
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	ret	
-
-    _endasm;
-}
-
-#endif
-
-static void
-clock_out_bytes (unsigned char bytecount,
-		 unsigned char xdata *p)
-{
-  while (bytecount-- > 0)
-    clock_out_config_byte (*p++);
-}
-
-/*
- * Transfer block of bytes from packet to FPGA serial configuration port
- *
- * On entry:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- *
- * On exit:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- */
-unsigned char
-fpga_load_xfer (xdata unsigned char *p, unsigned char bytecount)
-{
-  clock_out_bytes (bytecount, p);
-  return 1;
-}
-
-/*
- * check for successful load...
- */
-unsigned char
-fpga_load_end (void)
-{
-  unsigned char status = USRP_ALTERA_CONFIG;
-
-  if (!UC_BOARD_HAS_FPGA)			// always true if we don't have FPGA
-    return 1;
-
-  if ((status & bmALTERA_NSTATUS) == 0)		// failed to program
-    return 0;
-
-  if ((status & bmALTERA_CONF_DONE) == bmALTERA_CONF_DONE)
-    return 1;					// everything's cool
-
-  // I don't think this should happen.  It indicates that
-  // programming is still in progress.
-
-  return 0;
-}
diff --git a/firmware/fx2/src/common/fpga_load.h b/firmware/fx2/src/common/fpga_load.h
deleted file mode 100644
index 7c36a04c8..000000000
--- a/firmware/fx2/src/common/fpga_load.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#ifndef INCLUDED_FPGA_LOAD_H
-#define INCLUDED_FPGA_LOAD_H
-
-unsigned char fpga_load_begin (void);
-unsigned char fpga_load_xfer (xdata unsigned char *p, unsigned char len);
-unsigned char fpga_load_end (void);
-
-#endif /* INCLUDED_FPGA_LOAD_H */
diff --git a/firmware/fx2/src/common/gpif.c b/firmware/fx2/src/common/gpif.c
deleted file mode 100755
index 489e6e81a..000000000
--- a/firmware/fx2/src/common/gpif.c
+++ /dev/null
@@ -1,292 +0,0 @@
-// This program configures the General Programmable Interface (GPIF) for FX2.     
-// Please do not modify sections of text which are marked as "DO NOT EDIT ...". 
-//                                                                                
-// DO NOT EDIT ...                  
-// GPIF Initialization              
-// Interface Timing      Async        
-// Internal Ready Init   IntRdy=1     
-// CTL Out Tristate-able Binary       
-// SingleWrite WF Select     1     
-// SingleRead WF Select      0     
-// FifoWrite WF Select       3     
-// FifoRead WF Select        2     
-// Data Bus Idle Drive   Tristate     
-// END DO NOT EDIT                  
-                                    
-// DO NOT EDIT ...       
-// GPIF Wave Names       
-// Wave 0   = singlerd     
-// Wave 1   = singlewr     
-// Wave 2   = FIFORd       
-// Wave 3   = FIFOWr       
-                         
-// GPIF Ctrl Outputs   Level   
-// CTL 0    = WEN#     CMOS        
-// CTL 1    = REN#     CMOS        
-// CTL 2    = OE#      CMOS        
-// CTL 3    = CLRST    CMOS        
-// CTL 4    = unused   CMOS        
-// CTL 5    = BOGUS    CMOS        
-                               
-// GPIF Rdy Inputs         
-// RDY0     = EF#            
-// RDY1     = FF#            
-// RDY2     = unused         
-// RDY3     = unused         
-// RDY4     = unused         
-// RDY5     = TCXpire        
-// FIFOFlag = FIFOFlag       
-// IntReady = IntReady       
-// END DO NOT EDIT         
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 0: singlerd                                                                
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode NO Data   NO Data   NO Data   NO Data   NO Data   NO Data   NO Data            
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
-//   Term A                                                                                
-//   LFunc                                                                                 
-//   Term B                                                                                
-// Branch1                                                                                 
-// Branch0                                                                                 
-// Re-Exec                                                                                 
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         0         0         0         0         0         0         0    
-// REN#         0         0         0         0         0         0         0         0    
-// OE#          0         0         0         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 1: singlewr                                                                
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode Activate  Activate  Activate  Activate  Activate  Activate  Activate           
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
-//   Term A           EF#                                                                  
-//   LFunc            AND                                                                  
-//   Term B           EF#                                                                  
-// Branch1            ThenIdle                                                             
-// Branch0            ElseIdle                                                             
-// Re-Exec            No                                                                   
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         1         1         1         1         1         1         0    
-// REN#         0         0         0         0         0         0         0         0    
-// OE#          0         0         0         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 2: FIFORd                                                                  
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode NO Data   Activate  NO Data   NO Data   NO Data   NO Data   NO Data            
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    IF        Wait 1    IF        Wait 1    Wait 1    Wait 1             
-//   Term A           TCXpire             TCXpire                                          
-//   LFunc            AND                 AND                                              
-//   Term B           TCXpire             TCXpire                                          
-// Branch1            Then 2              ThenIdle                                         
-// Branch0            Else 1              ElseIdle                                         
-// Re-Exec            No                  No                                               
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         0         0         0         0         0         0         0    
-// REN#         0         0         0         0         0         0         0         0    
-// OE#          1         1         1         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 3: FIFOWr                                                                  
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode NO Data   Activate  Activate  Activate  Activate  Activate  Activate           
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
-//   Term A           TCXpire                                                              
-//   LFunc            AND                                                                  
-//   Term B           TCXpire                                                              
-// Branch1            ThenIdle                                                             
-// Branch0            Else 1                                                               
-// Re-Exec            No                                                                   
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         0         0         0         0         0         0         0    
-// REN#         0         0         0         0         0         0         0         0    
-// OE#          0         0         0         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-                                              
-// GPIF Program Code                          
-                                              
-// DO NOT EDIT ...                            
-#include "fx2.h"                            
-#include "fx2regs.h"                        
-#include "fx2sdly.h"     // SYNCDELAY macro 
-// END DO NOT EDIT                            
-                                              
-// DO NOT EDIT ...                     
-const char xdata WaveData[128] =     
-{                                      
-// Wave 0 
-/* LenBr */ 0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
-// Wave 1 
-/* LenBr */ 0x01,     0x3F,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x22,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
-/* Output*/ 0x00,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x00,
-/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
-// Wave 2 
-/* LenBr */ 0x01,     0x11,     0x01,     0x3F,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x00,     0x03,     0x00,     0x01,     0x00,     0x00,     0x00,     0x00,
-/* Output*/ 0x04,     0x04,     0x04,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* LFun  */ 0x00,     0x2D,     0x00,     0x2D,     0x00,     0x00,     0x00,     0x3F,
-// Wave 3 
-/* LenBr */ 0x01,     0x39,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x00,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
-/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* LFun  */ 0x00,     0x2D,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
-};                     
-// END DO NOT EDIT     
-                       
-// DO NOT EDIT ...                     
-const char xdata FlowStates[36] =   
-{                                      
-/* Wave 0 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* Wave 1 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* Wave 2 FlowStates */ 0x81,0x2D,0x26,0x00,0x04,0x04,0x03,0x02,0x00,
-/* Wave 3 FlowStates */ 0x81,0x2D,0x21,0x00,0x04,0x04,0x03,0x02,0x00,
-};                     
-// END DO NOT EDIT     
-                       
-// DO NOT EDIT ...                                               
-const char xdata InitData[7] =                                   
-{                                                                
-/* Regs  */ 0xA0,0x00,0x00,0x00,0xEE,0x4E,0x00     
-};                                                               
-// END DO NOT EDIT                                               
-                                                                 
-// TO DO: You may add additional code below.
-
-void GpifInit( void )
-{
-  BYTE i;
- 
-  // Registers which require a synchronization delay, see section 15.14
-  // FIFORESET        FIFOPINPOLAR
-  // INPKTEND         OUTPKTEND
-  // EPxBCH:L         REVCTL
-  // GPIFTCB3         GPIFTCB2
-  // GPIFTCB1         GPIFTCB0
-  // EPxFIFOPFH:L     EPxAUTOINLENH:L
-  // EPxFIFOCFG       EPxGPIFFLGSEL
-  // PINFLAGSxx       EPxFIFOIRQ
-  // EPxFIFOIE        GPIFIRQ
-  // GPIFIE           GPIFADRH:L
-  // UDMACRCH:L       EPxGPIFTRIG
-  // GPIFTRIG
-  
-  // Note: The pre-REVE EPxGPIFTCH/L register are affected, as well...
-  //      ...these have been replaced by GPIFTC[B3:B0] registers
- 
-  // 8051 doesn't have access to waveform memories 'til
-  // the part is in GPIF mode.
- 
-  IFCONFIG = 0xEE;
-  // IFCLKSRC=1   , FIFOs executes on internal clk source
-  // xMHz=1       , 48MHz internal clk rate
-  // IFCLKOE=0    , Don't drive IFCLK pin signal at 48MHz
-  // IFCLKPOL=0   , Don't invert IFCLK pin signal from internal clk
-  // ASYNC=1      , master samples asynchronous
-  // GSTATE=1     , Drive GPIF states out on PORTE[2:0], debug WF
-  // IFCFG[1:0]=10, FX2 in GPIF master mode
- 
-  GPIFABORT = 0xFF;  // abort any waveforms pending
- 
-  GPIFREADYCFG = InitData[ 0 ];
-  GPIFCTLCFG = InitData[ 1 ];
-  GPIFIDLECS = InitData[ 2 ];
-  GPIFIDLECTL = InitData[ 3 ];
-  GPIFWFSELECT = InitData[ 5 ];
-  GPIFREADYSTAT = InitData[ 6 ];
- 
-  // use dual autopointer feature... 
-  AUTOPTRSETUP = 0x07;          // inc both pointers, 
-                                // ...warning: this introduces pdata hole(s)
-                                // ...at E67B (XAUTODAT1) and E67C (XAUTODAT2)
-  
-  // source
-  AUTOPTRH1 = MSB( &WaveData );
-  AUTOPTRL1 = LSB( &WaveData );
-  
-  // destination
-  AUTOPTRH2 = 0xE4;
-  AUTOPTRL2 = 0x00;
- 
-  // transfer
-  for ( i = 0x00; i < 128; i++ )
-  {
-    EXTAUTODAT2 = EXTAUTODAT1;
-  }
- 
-// Configure GPIF Address pins, output initial value,
-  PORTCCFG = 0xFF;    // [7:0] as alt. func. GPIFADR[7:0]
-  OEC = 0xFF;         // and as outputs
-  PORTECFG |= 0x80;   // [8] as alt. func. GPIFADR[8]
-  OEE |= 0x80;        // and as output
- 
-// ...OR... tri-state GPIFADR[8:0] pins
-//  PORTCCFG = 0x00;  // [7:0] as port I/O
-//  OEC = 0x00;       // and as inputs
-//  PORTECFG &= 0x7F; // [8] as port I/O
-//  OEE &= 0x7F;      // and as input
- 
-// GPIF address pins update when GPIFADRH/L written
-  SYNCDELAY;                    // 
-  GPIFADRH = 0x00;    // bits[7:1] always 0
-  SYNCDELAY;                    // 
-  GPIFADRL = 0x00;    // point to PERIPHERAL address 0x0000
- 
-// Configure GPIF FlowStates registers for Wave 0 of WaveData
-  FLOWSTATE = FlowStates[ 0 ];
-  FLOWLOGIC = FlowStates[ 1 ];
-  FLOWEQ0CTL = FlowStates[ 2 ];
-  FLOWEQ1CTL = FlowStates[ 3 ];
-  FLOWHOLDOFF = FlowStates[ 4 ];
-  FLOWSTB = FlowStates[ 5 ];
-  FLOWSTBEDGE = FlowStates[ 6 ];
-  FLOWSTBHPERIOD = FlowStates[ 7 ];
-}
- 
diff --git a/firmware/fx2/src/common/gpif.gpf b/firmware/fx2/src/common/gpif.gpf
deleted file mode 100755
index a954ac193..000000000
--- a/firmware/fx2/src/common/gpif.gpf
+++ /dev/null
diff --git a/firmware/fx2/src/common/init_gpif.c b/firmware/fx2/src/common/init_gpif.c
deleted file mode 100644
index edde919be..000000000
--- a/firmware/fx2/src/common/init_gpif.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#include "usrp_common.h"
-
-// These are the tables generated by the Cypress GPIF Designer
-
-extern const char WaveData[128];
-extern const char FlowStates[36];
-extern const char InitData[7];
-
-// The tool is kind of screwed up, in that it doesn't configure some
-// of the ports correctly.  We just use their tables and handle the
-// initialization ourselves.  They also declare that their static
-// initialized data is in xdata, which screws us too.
-
-void
-init_gpif (void)
-{
-  // we've already setup IFCONFIG before calling this...
-
-  GPIFABORT = 0xFF;  // abort any waveforms pending
-  SYNCDELAY;
- 
-  GPIFREADYCFG = InitData[ 0 ];
-  GPIFCTLCFG = InitData[ 1 ];
-  GPIFIDLECS = InitData[ 2 ];
-  GPIFIDLECTL = InitData[ 3 ];
-  // Hmmm, what's InitData[ 4 ] ...
-  GPIFWFSELECT = InitData[ 5 ];
-  // GPIFREADYSTAT = InitData[ 6 ];	// I think this register is read only...
- 
-  {
-    BYTE i;
-    
-    for (i = 0; i < 128; i++){
-      GPIF_WAVE_DATA[i] = WaveData[i];
-    }
-  }
- 
-  FLOWSTATE = 0;		/* ensure it's off */
-}
diff --git a/firmware/fx2/src/common/usrp_common.c b/firmware/fx2/src/common/usrp_common.c
deleted file mode 100644
index 0998653c2..000000000
--- a/firmware/fx2/src/common/usrp_common.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-/* 
- * common code for USRP
- */
-
-#include "usrp_common.h"
-
-void init_board (void);
-
-void
-init_usrp (void)
-{
-  CPUCS = bmCLKSPD1;	// CPU runs @ 48 MHz
-  CKCON = 0;		// MOVX takes 2 cycles
-
-  // IFCLK is generated internally and runs at 48 MHz; GPIF "master mode"
-
-  IFCONFIG = bmIFCLKSRC | bm3048MHZ | bmIFCLKOE | bmIFCLKPOL | bmIFGPIF;
-  SYNCDELAY;
-
-  // configure IO ports (B and D are used by GPIF)
-
-  IOA = bmPORT_A_INITIAL;	// Port A initial state
-  OEA = bmPORT_A_OUTPUTS;	// Port A direction register
-
-  IOC = bmPORT_C_INITIAL;	// Port C initial state
-  OEC = bmPORT_C_OUTPUTS;	// Port C direction register
-
-  IOE = bmPORT_E_INITIAL;	// Port E initial state
-  OEE = bmPORT_E_OUTPUTS;	// Port E direction register
-
-
-  // REVCTL = bmDYN_OUT | bmENH_PKT;			// highly recommended by docs
-  // SYNCDELAY;
-  
-  // configure end points
-
-  EP1OUTCFG = bmVALID | bmBULK;				SYNCDELAY;
-  EP1INCFG  = bmVALID | bmBULK | bmIN;			SYNCDELAY;
-
-  EP2CFG    = bmVALID | bmBULK | bmQUADBUF;		SYNCDELAY;	// 512 quad bulk OUT
-  EP4CFG    = 0;					SYNCDELAY;	// disabled
-  EP6CFG    = bmVALID | bmBULK | bmQUADBUF | bmIN;	SYNCDELAY;	// 512 quad bulk IN
-  EP8CFG    = 0;					SYNCDELAY;	// disabled
-
-  // reset FIFOs
-
-  FIFORESET = bmNAKALL;					SYNCDELAY;
-  FIFORESET = 2;					SYNCDELAY;
-  // FIFORESET = 4;					SYNCDELAY;
-  FIFORESET = 6;					SYNCDELAY;
-  // FIFORESET = 8;					SYNCDELAY;
-  FIFORESET = 0;					SYNCDELAY;
-  
-  // configure end point FIFOs
-
-  // let core see 0 to 1 transistion of autoout bit
-
-  EP2FIFOCFG =             bmWORDWIDE;			SYNCDELAY;
-  EP2FIFOCFG = bmAUTOOUT | bmWORDWIDE;			SYNCDELAY;
-  EP6FIFOCFG = bmAUTOIN  | bmWORDWIDE;			SYNCDELAY;
-
-
-  // prime the pump 
-
-#if 0
-  EP2BCL  = 0x80;		SYNCDELAY;
-  EP2BCL  = 0x80;		SYNCDELAY;
-  EP2BCL  = 0x80;		SYNCDELAY;
-  EP2BCL  = 0x80;		SYNCDELAY;
-#endif
-
-  EP0BCH = 0;			SYNCDELAY;
-
-  // arm EP1OUT so we can receive "out" packets (TRM pg 8-8)
-
-  EP1OUTBC = 0;			SYNCDELAY;
-
-  EP2GPIFFLGSEL = 0x01;		SYNCDELAY; // For EP2OUT, GPIF uses EF flag
-  EP6GPIFFLGSEL = 0x02;		SYNCDELAY; // For EP6IN,  GPIF uses FF flag
-
-  // set autoin length for EP6
-  // FIXME should be f(enumeration)
-
-  EP6AUTOINLENH = (512) >> 8;	SYNCDELAY;  // this is the length for high speed
-  EP6AUTOINLENL = (512) & 0xff; SYNCDELAY;
-
-  init_board ();
-}
-
diff --git a/firmware/fx2/src/common/usrp_globals.h b/firmware/fx2/src/common/usrp_globals.h
deleted file mode 100644
index 445e9e6b4..000000000
--- a/firmware/fx2/src/common/usrp_globals.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-#ifndef _USRP_GLOBALS_H_
-#define _USRP_GLOBALS_H_
-
-extern unsigned char g_tx_enable;
-extern unsigned char g_rx_enable;
-extern unsigned char g_fpga_reset;
-extern unsigned char g_rx_overrun;
-extern unsigned char g_tx_underrun;
-
-
-#endif /* _USRP_GLOBALS_H_ */
diff --git a/firmware/fx2/src/common/vectors.a51 b/firmware/fx2/src/common/vectors.a51
deleted file mode 100644
index e9382ab84..000000000
--- a/firmware/fx2/src/common/vectors.a51
+++ /dev/null
@@ -1,180 +0,0 @@
-;;; -*- asm -*-
-;;;
-;;; Copyright 2003 Free Software Foundation, Inc.
-;;; 
-;;; This file is part of GNU Radio
-;;; 
-;;; GNU Radio is free software; you can redistribute it and/or modify
-;;; it under the terms of the GNU General Public License as published by
-;;; the Free Software Foundation; either version 3, or (at your option)
-;;; any later version.
-;;; 
-;;; GNU Radio is distributed in the hope that it will be useful,
-;;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-;;; GNU General Public License for more details.
-;;; 
-;;; You should have received a copy of the GNU General Public License
-;;; along with GNU Radio; see the file COPYING.  If not, write to
-;;; the Free Software Foundation, Inc., 51 Franklin Street,
-;;; Boston, MA 02110-1301, USA.
-;;; 
-
-;;; Interrupt vectors.
-
-;;; N.B. This object module must come first in the list of modules
-
-	.module vectors
-
-;;; ----------------------------------------------------------------
-;;;		  standard FX2 interrupt vectors
-;;; ----------------------------------------------------------------
-
-	.area CSEG (CODE)
-	.area GSINIT (CODE)
-	.area CSEG (CODE)
-__standard_interrupt_vector::
-__reset_vector::
-	ljmp	s_GSINIT
-	
-	;; 13 8-byte entries.  We point them all at __isr_nop
-	ljmp	__isr_nop	; 3 bytes
-	.ds	5		; + 5 = 8 bytes for vector slot
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-
-__isr_nop::
-	reti
-
-;;; ----------------------------------------------------------------
-;;; the FIFO/GPIF autovector.  14 4-byte entries.
-;;; must start on a 128 byte boundary.
-;;; ----------------------------------------------------------------
-	
-	. = __reset_vector + 0x0080
-		
-__fifo_gpif_autovector::
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-
-	
-;;; ----------------------------------------------------------------
-;;; the USB autovector.  32 4-byte entries.
-;;; must start on a 256 byte boundary.
-;;; ----------------------------------------------------------------
-
-	. = __reset_vector + 0x0100
-	
-__usb_autovector::
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
diff --git a/firmware/fx2/src/usrp1/.gitignore b/firmware/fx2/src/usrp1/.gitignore
deleted file mode 100644
index 54a9e9415..000000000
--- a/firmware/fx2/src/usrp1/.gitignore
+++ /dev/null
@@ -1,20 +0,0 @@
-/*.ihx
-/*.lnk
-/*.lst
-/*.map
-/*.mem
-/*.rel
-/*.rst
-/*.sym
-/blink_leds.asm
-/usrp_common.asm
-/command_loop.asm
-/fpga.asm
-/*.asm
-/Makefile
-/Makefile.in
-/usrp_gpif.c
-/usrp_gpif_inline.h
-/Makefile.in
-/burn-usrp2-eeprom
-/burn-usrp4-eeprom
diff --git a/firmware/fx2/src/usrp1/Makefile.am b/firmware/fx2/src/usrp1/Makefile.am
deleted file mode 100644
index a964f9198..000000000
--- a/firmware/fx2/src/usrp1/Makefile.am
+++ /dev/null
@@ -1,141 +0,0 @@
-#
-# Copyright 2003,2006 Free Software Foundation, Inc.
-# 
-# This file is part of GNU Radio
-# 
-# GNU Radio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-# 
-# GNU Radio is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with GNU Radio; see the file COPYING.  If not, write to
-# the Free Software Foundation, Inc., 51 Franklin Street,
-# Boston, MA 02110-1301, USA.
-# 
-
-#firmwaredir = $(prefix)/share/uhd/images
-#firmware_DATA = usrp1_fw.ihx
-
-#eepromdir = $(firmwaredir)
-#eepromfile = eeprom_boot.ihx
-#eeprom_DATA = usrp1_eeprom.bin
-
-EXTRA_DIST =			\
-	edit-gpif		\
-	_startup.a51		\
-	blink_leds.c		\
-	board_specific.c	\
-	check_mdelay.c		\
-	check_udelay.c		\
-	eeprom_boot.a51		\
-	eeprom_init.c		\
-	eeprom_io.c		\
-	eeprom_io.h		\
-	fpga_load.c		\
-	fpga_rev2.c		\
-	fpga_rev2.h		\
-	gpif.c			\
-	init_gpif.c		\
-	spi.c			\
-	spi.h			\
-	usb_descriptors.a51	\
-	usrp_common.c		\
-	usrp_common.h		\
-	usrp_gpif.c		\
-	usrp_main.c		\
-	usrp_rev2_regs.h	\
-	vectors.a51		
-
-
-DEFINES=-DHAVE_USRP2
-FW_INCLUDES=-I$(top_srcdir)/include \
-         -I$(top_srcdir)/src/usrp1 \
-	 -I$(top_srcdir)/src/common \
-	 -I$(top_builddir)/src/common
-
-# with EA = 0, the FX2 implements a portion of the 8051 "external memory"
-# on chip.  This memory is mapped like this:
-#
-# The bottom 8K of memory (0x0000 - 0x1fff) is used for both data and
-# code accesses.  There's also 512 bytes for data only from 0xe000 - 0xe1ff.
-#
-# We tell the linker to start the xdata segment at 0x1800, 6K up from
-# the bottom.
-
-MEMOPTS = --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 \
- -Wl '-b USBDESCSEG = 0xE000'
-
-LIBOPTS = -L ../../lib libfx2.lib
-LIBDEP = ../../lib/libfx2.lib
-
-LINKOPTS = $(MEMOPTS) $(LIBOPTS)
-
-EXECUTABLES = 			\
-	std.ihx			\
-	blink_leds.ihx 		\
-	check_mdelay.ihx	\
-	check_udelay.ihx	\
-	eeprom_boot.ihx		
-
-STARTUP = _startup.rel
-
-.c.rel:
-	$(XCC) $(FW_INCLUDES) $(DEFINES) \
-		-c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
-
-.a51.rel:
-	test -f `basename '$<'` || $(LN_S) '$<' .
-	test -f ../common/`basename '$<'` -o \
-		\! -f `dirname '$<'`/../common/`basename '$<'` \
-		|| $(LN_S) `dirname '$<'`/../common/`basename '$<'` ../common/`basename '$<'`
-	$(XAS) `basename '$<'`
-
-
-EEPROM_BOOT_OBJS = eeprom_boot.rel eeprom_init.rel $(STARTUP)
-
-eeprom_boot.ihx: $(EEPROM_BOOT_OBJS) $(LIBDEP)
-	$(XCC) $(LINKOPTS) -o $@ $(EEPROM_BOOT_OBJS)
-
-usrp1_eeprom.bin: eeprom_boot.bin
-	$(PYTHON) ../common/build_eeprom.py -r4 $< $@
-
-eeprom_boot.bin: eeprom_boot.ihx
-	objcopy -I ihex -O binary $< $@
-
-USRP_OBJS = \
-	vectors.rel 						\
-	usrp_main.rel usrp_common.rel board_specific.rel	\
-	fpga_load.rel fpga_rev2.rel init_gpif.rel usrp_gpif.rel \
-	usb_descriptors.rel spi.rel eeprom_io.rel $(STARTUP)
-
-std.ihx: $(USRP_OBJS) $(LIBDEP)
-	$(XCC) $(LINKOPTS) -o $@ $(USRP_OBJS)
-
-CLEANFILES = 		\
-	*.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib	*.bin \
-	usrp_gpif.c usrp_gpif_inline.h
-
-DISTCLEANFILES = 	\
-	*.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib *.bin
-
-# build gpif stuff
-
-all: usrp_gpif.c std.ihx usrp1_eeprom.bin
-
-usrp_gpif.c usrp_gpif_inline.h : gpif.c
-	srcdir=$(srcdir) $(PYTHON) $(srcdir)/edit-gpif $(srcdir)/gpif.c usrp_gpif.c usrp_gpif_inline.h
-
-# dependencies
-
-usrp_main.rel: usrp_gpif_inline.h
-
-#usrp_main.rel: fpga.h usrp_common.h ../../include/usrp_commands.h usrp_gpif_inline.h  ../../include/usrp_config.h usrp_rev2_regs.h ../../include/fx2regs.h
-#usrp_common.rel: usrp_common.h ../../include/usrp_commands.h ../../include/usrp_config.h usrp_rev2_regs.h ../../include/fx2regs.h
-#fpga.rel: usrp_common.h ../../include/usrp_commands.h fpga.h ../../include/usrp_config.h usrp_rev2_regs.h ../../include/fx2regs.h
-#init_gpif.rel: usrp_common.h ../../include/usrp_config.h usrp_rev2_regs.h ../../include/fx2regs.h
diff --git a/firmware/fx2/src/usrp1/_startup.a51 b/firmware/fx2/src/usrp1/_startup.a51
deleted file mode 100644
index 4f5309922..000000000
--- a/firmware/fx2/src/usrp1/_startup.a51
+++ /dev/null
@@ -1 +0,0 @@
-	.include "../common/_startup.a51"
diff --git a/firmware/fx2/src/usrp1/blink_leds.c b/firmware/fx2/src/usrp1/blink_leds.c
deleted file mode 100644
index c633d5d48..000000000
--- a/firmware/fx2/src/usrp1/blink_leds.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../common/blink_leds.c"
diff --git a/firmware/fx2/src/usrp1/board_specific.c b/firmware/fx2/src/usrp1/board_specific.c
deleted file mode 100644
index ef0081d84..000000000
--- a/firmware/fx2/src/usrp1/board_specific.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2004 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#include "usrp_common.h"
-#include "spi.h"
-
-void
-set_led_0 (unsigned char on)
-{
-  if (!on)			// active low
-    USRP_PC |= bmPC_LED0;
-  else
-    USRP_PC &= ~bmPC_LED0;
-}
-
-void 
-set_led_1 (unsigned char on)
-{
-  if (!on)			// active low
-    USRP_PC |= bmPC_LED1;
-  else
-    USRP_PC &= ~bmPC_LED1;
-}
-
-void
-toggle_led_0 (void)
-{
-  USRP_PC ^= bmPC_LED0;
-}
-
-void
-toggle_led_1 (void)
-{
-  USRP_PC ^= bmPC_LED1;
-}
-
-void
-la_trace_init (void)
-{
-}
-
-void
-set_sleep_bits (unsigned char bits, unsigned char mask)
-{
-  // NOP on usrp1
-}
-
-static xdata unsigned char xbuf[1];
-
-void
-write_9862 (unsigned char which, unsigned char regno, unsigned char value)
-{
-  xbuf[0] = value;
-  
-  spi_write (0, regno & 0x3f,
-	     which == 0 ? SPI_ENABLE_CODEC_A : SPI_ENABLE_CODEC_B,
-	     SPI_FMT_MSB | SPI_FMT_HDR_1,
-	     xbuf, 1);
-}
-
-void
-write_both_9862s (unsigned char regno, unsigned char value)
-{
-  xbuf[0] = value;
-  
-  spi_write (0, regno & 0x3f,
-	     SPI_ENABLE_CODEC_A | SPI_ENABLE_CODEC_B,
-	     SPI_FMT_MSB | SPI_FMT_HDR_1,
-	     xbuf, 1);
-}
-
-#define REG_RX_PWR_DN		 1
-#define	REG_TX_PWR_DN		 8
-#define	REG_TX_MODULATOR	20
-
-static void
-power_down_9862s (void)
-{
-  write_both_9862s (REG_RX_PWR_DN,    0x01);
-  write_both_9862s (REG_TX_PWR_DN,    0x0f);	// pwr dn digital and analog_both
-  write_both_9862s (REG_TX_MODULATOR, 0x00);	// coarse & fine modulators disabled
-}
-
-void
-init_board (void)
-{
-  la_trace_init ();
-  init_spi ();
-
-  USRP_PC &= ~bmPC_nRESET;	// active low reset
-  USRP_PC |= bmPC_nRESET;
-
-  power_down_9862s ();
-}
diff --git a/firmware/fx2/src/usrp1/check_mdelay.c b/firmware/fx2/src/usrp1/check_mdelay.c
deleted file mode 100644
index ea4ccdb14..000000000
--- a/firmware/fx2/src/usrp1/check_mdelay.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../common/check_mdelay.c"
diff --git a/firmware/fx2/src/usrp1/check_udelay.c b/firmware/fx2/src/usrp1/check_udelay.c
deleted file mode 100644
index d01622e5e..000000000
--- a/firmware/fx2/src/usrp1/check_udelay.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../common/check_udelay.c"
diff --git a/firmware/fx2/src/usrp1/edit-gpif b/firmware/fx2/src/usrp1/edit-gpif
deleted file mode 100755
index 5367b75a5..000000000
--- a/firmware/fx2/src/usrp1/edit-gpif
+++ /dev/null
@@ -1,114 +0,0 @@
-#!/usr/bin/env python
-# -*- Python -*-
-#
-# Copyright 2003 Free Software Foundation, Inc.
-# 
-# This file is part of GNU Radio
-# 
-# GNU Radio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-# 
-# GNU Radio is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with GNU Radio; see the file COPYING.  If not, write to
-# the Free Software Foundation, Inc., 51 Franklin Street,
-# Boston, MA 02110-1301, USA.
-# 
-
-
-# Edit the gpif.c file generated by the Cypress GPIF Designer Tool and
-# produce usrp_gpif.c, and usrp_gpif_inline.h, files suitable for our
-# uses.
-
-import re
-import string
-import sys
-
-def check_flow_state (line, flow_state_dict):
-    mo = re.match (r'/\* Wave (\d) FlowStates \*/ (.*),', line)
-    if mo:
-        wave = int (mo.group (1))
-        data = mo.group (2)
-        split = data.split (',', 8)
-        v = map (lambda x : int (x, 16), split)
-        # print "%s, %s" % (wave, data)
-        # print "split: ", split
-        # print "v    : ", v
-        flow_state_dict[wave] = v
-
-
-def delta (xseq, yseq):
-    # set subtraction
-    z = []
-    for x in xseq:
-        if x not in yseq:
-            z.append (x)
-    return z
-    
-
-def write_define (output, name, pairs):
-    output.write ('#define %s()\t\\\n' % name)
-    output.write ('do {\t\t\t\t\t\\\n')
-    for reg, val in pairs:
-        output.write ('%14s = 0x%02x;\t\t\t\\\n' % (reg, val))
-    output.write ('} while (0)\n\n')
-    
-def write_inlines (output, dict):
-    regs = ['FLOWSTATE', 'FLOWLOGIC', 'FLOWEQ0CTL', 'FLOWEQ1CTL', 'FLOWHOLDOFF',
-            'FLOWSTB', 'FLOWSTBEDGE', 'FLOWSTBHPERIOD', 'GPIFHOLDAMOUNT']
-
-    READ_FLOW_STATE = 2
-    WRITE_FLOW_STATE = 3
-
-    read_info = zip (regs, dict[READ_FLOW_STATE])
-    write_info = zip (regs, dict[WRITE_FLOW_STATE])
-    
-    output.write ('''/*
- * Machine generated by "edit-gpif".  Do not edit by hand.
- */
-
-''')
-    write_define (output, 'setup_flowstate_common', read_info)
-    write_define (output, 'setup_flowstate_read', delta (read_info, write_info))
-    write_define (output, 'setup_flowstate_write', delta (write_info, read_info))
-    
-
-def edit_gpif (input_name, output_name, inline_name):
-    input = open (input_name, 'r')
-    output = open (output_name, 'w')
-    inline = open (inline_name, 'w')
-    flow_state_dict = {}
-
-    output.write ('''/*
- * Machine generated by "edit-gpif".  Do not edit by hand.
- */
-
-''')
-    
-    while 1:
-        line = input.readline ()
-        line = string.replace (line, '\r','')
-        line = re.sub (r' *$', r'', line)
-
-        check_flow_state (line, flow_state_dict)
-
-        line = re.sub (r'#include', r'// #include', line)
-        line = re.sub (r'xdata ', r'', line)
-        if re.search (r'GpifInit', line):
-            break
-        
-        output.write (line)
-
-    output.close ()
-    write_inlines (inline, flow_state_dict)
-    inline.close ()
-
-
-# gpif.c usrp_gpif.c usrp_gpif_inline.h
-edit_gpif (sys.argv[1], sys.argv[2], sys.argv[3])
diff --git a/firmware/fx2/src/usrp1/eeprom_boot.a51 b/firmware/fx2/src/usrp1/eeprom_boot.a51
deleted file mode 100644
index 65e452668..000000000
--- a/firmware/fx2/src/usrp1/eeprom_boot.a51
+++ /dev/null
@@ -1,573 +0,0 @@
-;--------------------------------------------------------
-; Hand tweaked minimal eeprom boot code
-;--------------------------------------------------------
-	.module eeprom_boot
-	.optsdcc -mmcs51 --model-small
-	
-;--------------------------------------------------------
-; Public variables in this module
-;--------------------------------------------------------
-	.globl _eeprom_init
-	.globl _EP8FIFOBUF
-	.globl _EP6FIFOBUF
-	.globl _EP4FIFOBUF
-	.globl _EP2FIFOBUF
-	.globl _EP1INBUF
-	.globl _EP1OUTBUF
-	.globl _EP0BUF
-	.globl _CT4
-	.globl _CT3
-	.globl _CT2
-	.globl _CT1
-	.globl _USBTEST
-	.globl _TESTCFG
-	.globl _DBUG
-	.globl _UDMACRCQUAL
-	.globl _UDMACRCL
-	.globl _UDMACRCH
-	.globl _GPIFHOLDAMOUNT
-	.globl _FLOWSTBHPERIOD
-	.globl _FLOWSTBEDGE
-	.globl _FLOWSTB
-	.globl _FLOWHOLDOFF
-	.globl _FLOWEQ1CTL
-	.globl _FLOWEQ0CTL
-	.globl _FLOWLOGIC
-	.globl _FLOWSTATE
-	.globl _GPIFABORT
-	.globl _GPIFREADYSTAT
-	.globl _GPIFREADYCFG
-	.globl _XGPIFSGLDATLNOX
-	.globl _XGPIFSGLDATLX
-	.globl _XGPIFSGLDATH
-	.globl _EP8GPIFTRIG
-	.globl _EP8GPIFPFSTOP
-	.globl _EP8GPIFFLGSEL
-	.globl _EP6GPIFTRIG
-	.globl _EP6GPIFPFSTOP
-	.globl _EP6GPIFFLGSEL
-	.globl _EP4GPIFTRIG
-	.globl _EP4GPIFPFSTOP
-	.globl _EP4GPIFFLGSEL
-	.globl _EP2GPIFTRIG
-	.globl _EP2GPIFPFSTOP
-	.globl _EP2GPIFFLGSEL
-	.globl _GPIFTCB0
-	.globl _GPIFTCB1
-	.globl _GPIFTCB2
-	.globl _GPIFTCB3
-	.globl _GPIFADRL
-	.globl _GPIFADRH
-	.globl _GPIFCTLCFG
-	.globl _GPIFIDLECTL
-	.globl _GPIFIDLECS
-	.globl _GPIFWFSELECT
-	.globl _SETUPDAT
-	.globl _SUDPTRCTL
-	.globl _SUDPTRL
-	.globl _SUDPTRH
-	.globl _EP8FIFOBCL
-	.globl _EP8FIFOBCH
-	.globl _EP6FIFOBCL
-	.globl _EP6FIFOBCH
-	.globl _EP4FIFOBCL
-	.globl _EP4FIFOBCH
-	.globl _EP2FIFOBCL
-	.globl _EP2FIFOBCH
-	.globl _EP8FIFOFLGS
-	.globl _EP6FIFOFLGS
-	.globl _EP4FIFOFLGS
-	.globl _EP2FIFOFLGS
-	.globl _EP8CS
-	.globl _EP6CS
-	.globl _EP4CS
-	.globl _EP2CS
-	.globl _EP1INCS
-	.globl _EP1OUTCS
-	.globl _EP0CS
-	.globl _EP8BCL
-	.globl _EP8BCH
-	.globl _EP6BCL
-	.globl _EP6BCH
-	.globl _EP4BCL
-	.globl _EP4BCH
-	.globl _EP2BCL
-	.globl _EP2BCH
-	.globl _EP1INBC
-	.globl _EP1OUTBC
-	.globl _EP0BCL
-	.globl _EP0BCH
-	.globl _FNADDR
-	.globl _MICROFRAME
-	.globl _USBFRAMEL
-	.globl _USBFRAMEH
-	.globl _TOGCTL
-	.globl _WAKEUPCS
-	.globl _SUSPEND
-	.globl _USBCS
-	.globl _XAUTODAT2
-	.globl _XAUTODAT1
-	.globl _I2CTL
-	.globl _I2DAT
-	.globl _I2CS
-	.globl _PORTECFG
-	.globl _PORTCCFG
-	.globl _PORTACFG
-	.globl _INTSETUP
-	.globl _INT4IVEC
-	.globl _INT2IVEC
-	.globl _CLRERRCNT
-	.globl _ERRCNTLIM
-	.globl _USBERRIRQ
-	.globl _USBERRIE
-	.globl _GPIFIRQ
-	.globl _GPIFIE
-	.globl _EPIRQ
-	.globl _EPIE
-	.globl _USBIRQ
-	.globl _USBIE
-	.globl _NAKIRQ
-	.globl _NAKIE
-	.globl _IBNIRQ
-	.globl _IBNIE
-	.globl _EP8FIFOIRQ
-	.globl _EP8FIFOIE
-	.globl _EP6FIFOIRQ
-	.globl _EP6FIFOIE
-	.globl _EP4FIFOIRQ
-	.globl _EP4FIFOIE
-	.globl _EP2FIFOIRQ
-	.globl _EP2FIFOIE
-	.globl _OUTPKTEND
-	.globl _INPKTEND
-	.globl _EP8ISOINPKTS
-	.globl _EP6ISOINPKTS
-	.globl _EP4ISOINPKTS
-	.globl _EP2ISOINPKTS
-	.globl _EP8FIFOPFL
-	.globl _EP8FIFOPFH
-	.globl _EP6FIFOPFL
-	.globl _EP6FIFOPFH
-	.globl _EP4FIFOPFL
-	.globl _EP4FIFOPFH
-	.globl _EP2FIFOPFL
-	.globl _EP2FIFOPFH
-	.globl _EP8AUTOINLENL
-	.globl _EP8AUTOINLENH
-	.globl _EP6AUTOINLENL
-	.globl _EP6AUTOINLENH
-	.globl _EP4AUTOINLENL
-	.globl _EP4AUTOINLENH
-	.globl _EP2AUTOINLENL
-	.globl _EP2AUTOINLENH
-	.globl _EP8FIFOCFG
-	.globl _EP6FIFOCFG
-	.globl _EP4FIFOCFG
-	.globl _EP2FIFOCFG
-	.globl _EP8CFG
-	.globl _EP6CFG
-	.globl _EP4CFG
-	.globl _EP2CFG
-	.globl _EP1INCFG
-	.globl _EP1OUTCFG
-	.globl _REVCTL
-	.globl _REVID
-	.globl _FIFOPINPOLAR
-	.globl _UART230
-	.globl _BPADDRL
-	.globl _BPADDRH
-	.globl _BREAKPT
-	.globl _FIFORESET
-	.globl _PINFLAGSCD
-	.globl _PINFLAGSAB
-	.globl _IFCONFIG
-	.globl _CPUCS
-	.globl _RES_WAVEDATA_END
-	.globl _GPIF_WAVE_DATA
-;--------------------------------------------------------
-; special function registers
-;--------------------------------------------------------
-_IOA	=	0x0080
-_SP	=	0x0081
-_DPL	=	0x0082
-_DPH	=	0x0083
-_DPL1	=	0x0084
-_DPH1	=	0x0085
-_DPS	=	0x0086
-_PCON	=	0x0087
-_TCON	=	0x0088
-_TMOD	=	0x0089
-_TL0	=	0x008a
-_TL1	=	0x008b
-_TH0	=	0x008c
-_TH1	=	0x008d
-_CKCON	=	0x008e
-_IOB	=	0x0090
-_EXIF	=	0x0091
-_MPAGE	=	0x0092
-_SCON0	=	0x0098
-_SBUF0	=	0x0099
-_APTR1H	=	0x009a
-_APTR1L	=	0x009b
-_AUTODAT1	=	0x009c
-_AUTOPTRH2	=	0x009d
-_AUTOPTRL2	=	0x009e
-_AUTODAT2	=	0x009f
-_IOC	=	0x00a0
-_INT2CLR	=	0x00a1
-_INT4CLR	=	0x00a2
-_IE	=	0x00a8
-_EP2468STAT	=	0x00aa
-_EP24FIFOFLGS	=	0x00ab
-_EP68FIFOFLGS	=	0x00ac
-_AUTOPTRSETUP	=	0x00af
-_IOD	=	0x00b0
-_IOE	=	0x00b1
-_OEA	=	0x00b2
-_OEB	=	0x00b3
-_OEC	=	0x00b4
-_OED	=	0x00b5
-_OEE	=	0x00b6
-_IP	=	0x00b8
-_EP01STAT	=	0x00ba
-_GPIFTRIG	=	0x00bb
-_GPIFSGLDATH	=	0x00bd
-_GPIFSGLDATLX	=	0x00be
-_GPIFSGLDATLNOX	=	0x00bf
-_SCON1	=	0x00c0
-_SBUF1	=	0x00c1
-_T2CON	=	0x00c8
-_RCAP2L	=	0x00ca
-_RCAP2H	=	0x00cb
-_TL2	=	0x00cc
-_TH2	=	0x00cd
-_PSW	=	0x00d0
-_EICON	=	0x00d8
-_ACC	=	0x00e0
-_EIE	=	0x00e8
-_B	=	0x00f0
-_EIP	=	0x00f8
-;--------------------------------------------------------
-; special function bits 
-;--------------------------------------------------------
-_SEL	=	0x0086
-_IT0	=	0x0088
-_IE0	=	0x0089
-_IT1	=	0x008a
-_IE1	=	0x008b
-_TR0	=	0x008c
-_TF0	=	0x008d
-_TR1	=	0x008e
-_TF1	=	0x008f
-_RI	=	0x0098
-_TI	=	0x0099
-_RB8	=	0x009a
-_TB8	=	0x009b
-_REN	=	0x009c
-_SM2	=	0x009d
-_SM1	=	0x009e
-_SM0	=	0x009f
-_EX0	=	0x00a8
-_ET0	=	0x00a9
-_EX1	=	0x00aa
-_ET1	=	0x00ab
-_ES0	=	0x00ac
-_ET2	=	0x00ad
-_ES1	=	0x00ae
-_EA	=	0x00af
-_PX0	=	0x00b8
-_PT0	=	0x00b9
-_PX1	=	0x00ba
-_PT1	=	0x00bb
-_PS0	=	0x00bc
-_PT2	=	0x00bd
-_PS1	=	0x00be
-_RI1	=	0x00c0
-_TI1	=	0x00c1
-_RB81	=	0x00c2
-_TB81	=	0x00c3
-_REN1	=	0x00c4
-_SM21	=	0x00c5
-_SM11	=	0x00c6
-_SM01	=	0x00c7
-_CP_RL2	=	0x00c8
-_C_T2	=	0x00c9
-_TR2	=	0x00ca
-_EXEN2	=	0x00cb
-_TCLK	=	0x00cc
-_RCLK	=	0x00cd
-_EXF2	=	0x00ce
-_TF2	=	0x00cf
-_P	=	0x00d0
-_FL	=	0x00d1
-_OV	=	0x00d2
-_RS0	=	0x00d3
-_RS1	=	0x00d4
-_F0	=	0x00d5
-_AC	=	0x00d6
-_CY	=	0x00d7
-_INT6	=	0x00db
-_RESI	=	0x00dc
-_ERESI	=	0x00dd
-_SMOD1	=	0x00df
-_EIUSB	=	0x00e8
-_EI2C	=	0x00e9
-_EIEX4	=	0x00ea
-_EIEX5	=	0x00eb
-_EIEX6	=	0x00ec
-_PUSB	=	0x00f8
-_PI2C	=	0x00f9
-_EIPX4	=	0x00fa
-_EIPX5	=	0x00fb
-_EIPX6	=	0x00fc
-_bitS_CLK	=	0x0080
-_bitS_OUT	=	0x0081
-_bitS_IN	=	0x0082
-_bitALTERA_DATA0	=	0x00a1
-_bitALTERA_DCLK	=	0x00a3
-;--------------------------------------------------------
-; overlayable register banks 
-;--------------------------------------------------------
-	.area REG_BANK_0	(REL,OVR,DATA)
-	.ds 8
-;--------------------------------------------------------
-; internal ram data
-;--------------------------------------------------------
-	.area DSEG    (DATA)
-;--------------------------------------------------------
-; overlayable items in internal ram 
-;--------------------------------------------------------
-	.area OSEG    (OVR,DATA)
-;--------------------------------------------------------
-; Stack segment in internal ram 
-;--------------------------------------------------------
-	.area	SSEG	(DATA)
-__start__stack:
-	.ds	1
-
-;--------------------------------------------------------
-; indirectly addressable internal ram data
-;--------------------------------------------------------
-	.area ISEG    (DATA)
-;--------------------------------------------------------
-; bit data
-;--------------------------------------------------------
-	.area BSEG    (BIT)
-;--------------------------------------------------------
-; external ram data
-;--------------------------------------------------------
-	.area XSEG    (XDATA)
-_GPIF_WAVE_DATA	=	0xe400
-_RES_WAVEDATA_END	=	0xe480
-_CPUCS	=	0xe600
-_IFCONFIG	=	0xe601
-_PINFLAGSAB	=	0xe602
-_PINFLAGSCD	=	0xe603
-_FIFORESET	=	0xe604
-_BREAKPT	=	0xe605
-_BPADDRH	=	0xe606
-_BPADDRL	=	0xe607
-_UART230	=	0xe608
-_FIFOPINPOLAR	=	0xe609
-_REVID	=	0xe60a
-_REVCTL	=	0xe60b
-_EP1OUTCFG	=	0xe610
-_EP1INCFG	=	0xe611
-_EP2CFG	=	0xe612
-_EP4CFG	=	0xe613
-_EP6CFG	=	0xe614
-_EP8CFG	=	0xe615
-_EP2FIFOCFG	=	0xe618
-_EP4FIFOCFG	=	0xe619
-_EP6FIFOCFG	=	0xe61a
-_EP8FIFOCFG	=	0xe61b
-_EP2AUTOINLENH	=	0xe620
-_EP2AUTOINLENL	=	0xe621
-_EP4AUTOINLENH	=	0xe622
-_EP4AUTOINLENL	=	0xe623
-_EP6AUTOINLENH	=	0xe624
-_EP6AUTOINLENL	=	0xe625
-_EP8AUTOINLENH	=	0xe626
-_EP8AUTOINLENL	=	0xe627
-_EP2FIFOPFH	=	0xe630
-_EP2FIFOPFL	=	0xe631
-_EP4FIFOPFH	=	0xe632
-_EP4FIFOPFL	=	0xe633
-_EP6FIFOPFH	=	0xe634
-_EP6FIFOPFL	=	0xe635
-_EP8FIFOPFH	=	0xe636
-_EP8FIFOPFL	=	0xe637
-_EP2ISOINPKTS	=	0xe640
-_EP4ISOINPKTS	=	0xe641
-_EP6ISOINPKTS	=	0xe642
-_EP8ISOINPKTS	=	0xe643
-_INPKTEND	=	0xe648
-_OUTPKTEND	=	0xe649
-_EP2FIFOIE	=	0xe650
-_EP2FIFOIRQ	=	0xe651
-_EP4FIFOIE	=	0xe652
-_EP4FIFOIRQ	=	0xe653
-_EP6FIFOIE	=	0xe654
-_EP6FIFOIRQ	=	0xe655
-_EP8FIFOIE	=	0xe656
-_EP8FIFOIRQ	=	0xe657
-_IBNIE	=	0xe658
-_IBNIRQ	=	0xe659
-_NAKIE	=	0xe65a
-_NAKIRQ	=	0xe65b
-_USBIE	=	0xe65c
-_USBIRQ	=	0xe65d
-_EPIE	=	0xe65e
-_EPIRQ	=	0xe65f
-_GPIFIE	=	0xe660
-_GPIFIRQ	=	0xe661
-_USBERRIE	=	0xe662
-_USBERRIRQ	=	0xe663
-_ERRCNTLIM	=	0xe664
-_CLRERRCNT	=	0xe665
-_INT2IVEC	=	0xe666
-_INT4IVEC	=	0xe667
-_INTSETUP	=	0xe668
-_PORTACFG	=	0xe670
-_PORTCCFG	=	0xe671
-_PORTECFG	=	0xe672
-_I2CS	=	0xe678
-_I2DAT	=	0xe679
-_I2CTL	=	0xe67a
-_XAUTODAT1	=	0xe67b
-_XAUTODAT2	=	0xe67c
-_USBCS	=	0xe680
-_SUSPEND	=	0xe681
-_WAKEUPCS	=	0xe682
-_TOGCTL	=	0xe683
-_USBFRAMEH	=	0xe684
-_USBFRAMEL	=	0xe685
-_MICROFRAME	=	0xe686
-_FNADDR	=	0xe687
-_EP0BCH	=	0xe68a
-_EP0BCL	=	0xe68b
-_EP1OUTBC	=	0xe68d
-_EP1INBC	=	0xe68f
-_EP2BCH	=	0xe690
-_EP2BCL	=	0xe691
-_EP4BCH	=	0xe694
-_EP4BCL	=	0xe695
-_EP6BCH	=	0xe698
-_EP6BCL	=	0xe699
-_EP8BCH	=	0xe69c
-_EP8BCL	=	0xe69d
-_EP0CS	=	0xe6a0
-_EP1OUTCS	=	0xe6a1
-_EP1INCS	=	0xe6a2
-_EP2CS	=	0xe6a3
-_EP4CS	=	0xe6a4
-_EP6CS	=	0xe6a5
-_EP8CS	=	0xe6a6
-_EP2FIFOFLGS	=	0xe6a7
-_EP4FIFOFLGS	=	0xe6a8
-_EP6FIFOFLGS	=	0xe6a9
-_EP8FIFOFLGS	=	0xe6aa
-_EP2FIFOBCH	=	0xe6ab
-_EP2FIFOBCL	=	0xe6ac
-_EP4FIFOBCH	=	0xe6ad
-_EP4FIFOBCL	=	0xe6ae
-_EP6FIFOBCH	=	0xe6af
-_EP6FIFOBCL	=	0xe6b0
-_EP8FIFOBCH	=	0xe6b1
-_EP8FIFOBCL	=	0xe6b2
-_SUDPTRH	=	0xe6b3
-_SUDPTRL	=	0xe6b4
-_SUDPTRCTL	=	0xe6b5
-_SETUPDAT	=	0xe6b8
-_GPIFWFSELECT	=	0xe6c0
-_GPIFIDLECS	=	0xe6c1
-_GPIFIDLECTL	=	0xe6c2
-_GPIFCTLCFG	=	0xe6c3
-_GPIFADRH	=	0xe6c4
-_GPIFADRL	=	0xe6c5
-_GPIFTCB3	=	0xe6ce
-_GPIFTCB2	=	0xe6cf
-_GPIFTCB1	=	0xe6d0
-_GPIFTCB0	=	0xe6d1
-_EP2GPIFFLGSEL	=	0xe6d2
-_EP2GPIFPFSTOP	=	0xe6d3
-_EP2GPIFTRIG	=	0xe6d4
-_EP4GPIFFLGSEL	=	0xe6da
-_EP4GPIFPFSTOP	=	0xe6db
-_EP4GPIFTRIG	=	0xe6dc
-_EP6GPIFFLGSEL	=	0xe6e2
-_EP6GPIFPFSTOP	=	0xe6e3
-_EP6GPIFTRIG	=	0xe6e4
-_EP8GPIFFLGSEL	=	0xe6ea
-_EP8GPIFPFSTOP	=	0xe6eb
-_EP8GPIFTRIG	=	0xe6ec
-_XGPIFSGLDATH	=	0xe6f0
-_XGPIFSGLDATLX	=	0xe6f1
-_XGPIFSGLDATLNOX	=	0xe6f2
-_GPIFREADYCFG	=	0xe6f3
-_GPIFREADYSTAT	=	0xe6f4
-_GPIFABORT	=	0xe6f5
-_FLOWSTATE	=	0xe6c6
-_FLOWLOGIC	=	0xe6c7
-_FLOWEQ0CTL	=	0xe6c8
-_FLOWEQ1CTL	=	0xe6c9
-_FLOWHOLDOFF	=	0xe6ca
-_FLOWSTB	=	0xe6cb
-_FLOWSTBEDGE	=	0xe6cc
-_FLOWSTBHPERIOD	=	0xe6cd
-_GPIFHOLDAMOUNT	=	0xe60c
-_UDMACRCH	=	0xe67d
-_UDMACRCL	=	0xe67e
-_UDMACRCQUAL	=	0xe67f
-_DBUG	=	0xe6f8
-_TESTCFG	=	0xe6f9
-_USBTEST	=	0xe6fa
-_CT1	=	0xe6fb
-_CT2	=	0xe6fc
-_CT3	=	0xe6fd
-_CT4	=	0xe6fe
-_EP0BUF	=	0xe740
-_EP1OUTBUF	=	0xe780
-_EP1INBUF	=	0xe7c0
-_EP2FIFOBUF	=	0xf000
-_EP4FIFOBUF	=	0xf400
-_EP6FIFOBUF	=	0xf800
-_EP8FIFOBUF	=	0xfc00
-;--------------------------------------------------------
-; external initialized ram data
-;--------------------------------------------------------
-;--------------------------------------------------------
-; interrupt vector 
-;--------------------------------------------------------
-	.area CSEG    (CODE)
-__interrupt_vect:
-	ljmp	__sdcc_gsinit_startup
-;--------------------------------------------------------
-; global & static initialisations
-;--------------------------------------------------------
-	.area GSINIT  (CODE)
-	.area GSFINAL (CODE)
-	.area GSINIT  (CODE)
-__sdcc_gsinit_startup:
-	mov	sp,#__start__stack - 1
-	lcall	__sdcc_external_startup
-	mov	a,dpl
-	jz	__sdcc_init_data
-	ljmp	__sdcc_program_startup
-__sdcc_init_data:
-	.area GSFINAL (CODE)
-	ljmp	__sdcc_program_startup
-;--------------------------------------------------------
-; Home
-;--------------------------------------------------------
-	.area HOME    (CODE)
-	.area CSEG    (CODE)
-;--------------------------------------------------------
-; code
-;--------------------------------------------------------
-	.area CSEG    (CODE)
-__sdcc_program_startup:
-	lcall	_eeprom_init
-;	return from _eeprom_init will spin here
-	sjmp .
-	.area CSEG    (CODE)
diff --git a/firmware/fx2/src/usrp1/eeprom_init.c b/firmware/fx2/src/usrp1/eeprom_init.c
deleted file mode 100644
index a6f6cbe2d..000000000
--- a/firmware/fx2/src/usrp1/eeprom_init.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2004 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#include "usrp_common.h"
-#include "usrp_commands.h"
-#include "spi.h"
-
-/*
- * the host side fpga loader code pushes an MD5 hash of the bitstream
- * into hash1.
- */
-#define	  USRP_HASH_SIZE      16
-xdata at USRP_HASH_SLOT_0_ADDR unsigned char hash0[USRP_HASH_SIZE];
-
-
-#define enable_codecs() USRP_PA &= ~(bmPA_SEN_CODEC_A | bmPA_SEN_CODEC_B)
-#define disable_all()	USRP_PA |=  (bmPA_SEN_CODEC_A | bmPA_SEN_CODEC_B)
-
-static void
-write_byte_msb (unsigned char v);
-
-void
-write_both_9862s (unsigned char header_lo, unsigned char v)
-{
-  enable_codecs ();
-
-  write_byte_msb (header_lo);
-  write_byte_msb (v);
-
-  disable_all ();
-}
-
-// ----------------------------------------------------------------
-
-static void
-write_byte_msb (unsigned char v)
-{
-  unsigned char n = 8;
-  do {
-    v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
-    bitS_OUT = v & 0x1;
-    bitS_CLK = 1;
-    bitS_CLK = 0;
-  } while (--n != 0);
-}
-
-// ----------------------------------------------------------------
-
-#define REG_RX_PWR_DN		 1
-#define	REG_TX_PWR_DN		 8
-#define	REG_TX_MODULATOR	20
-
-void eeprom_init (void)
-{
-  unsigned short counter;
-  unsigned char	 i;
-
-  // configure IO ports (B and D are used by GPIF)
-
-  IOA = bmPORT_A_INITIAL;	// Port A initial state
-  OEA = bmPORT_A_OUTPUTS;	// Port A direction register
-
-  IOC = bmPORT_C_INITIAL;	// Port C initial state
-  OEC = bmPORT_C_OUTPUTS;	// Port C direction register
-
-  IOE = bmPORT_E_INITIAL;	// Port E initial state
-  OEE = bmPORT_E_OUTPUTS;	// Port E direction register
-
-  EP0BCH = 0;			SYNCDELAY;
-
-  // USBCS &= ~bmRENUM;		// chip firmware handles commands
-  USBCS = 0;			// chip firmware handles commands
-
-  USRP_PC &= ~bmPC_nRESET;	// active low reset
-  USRP_PC |=  bmPC_nRESET;
-
-  // init_spi ();
-  bitS_OUT = 0;			/* idle state has CLK = 0 */
-
-  write_both_9862s (REG_RX_PWR_DN,    0x01);
-  write_both_9862s (REG_TX_PWR_DN,    0x0f);	// pwr dn digital and analog_both
-  write_both_9862s (REG_TX_MODULATOR, 0x00);	// coarse & fine modulators disabled
-
-  // zero firmware hash slot
-  i = 0;
-  do {
-    hash0[i] = 0;
-    i++;
-  } while (i != USRP_HASH_SIZE);
-
-  counter = 0;
-  while (1){
-    counter++;
-    if (counter & 0x8000)
-      IOC ^= bmPC_LED0;
-  }
-}
diff --git a/firmware/fx2/src/usrp1/eeprom_io.c b/firmware/fx2/src/usrp1/eeprom_io.c
deleted file mode 100644
index 9eeb53636..000000000
--- a/firmware/fx2/src/usrp1/eeprom_io.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2006 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#include "eeprom_io.h"
-#include "i2c.h"
-#include "delay.h"
-
-// returns non-zero if successful, else 0
-unsigned char
-eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
-	     xdata unsigned char *buf, unsigned char len)
-{
-  // We setup a random read by first doing a "zero byte write".
-  // Writes carry an address.  Reads use an implicit address.
-
-  static xdata unsigned char cmd[1];
-  cmd[0] = eeprom_offset;
-  if (!i2c_write(i2c_addr, cmd, 1))
-    return 0;
-
-  return i2c_read(i2c_addr, buf, len);
-}
-
-
-#if 0
-
-// returns non-zero if successful, else 0
-unsigned char
-eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset,
-	      const xdata unsigned char *buf, unsigned char len)
-{
-  static xdata unsigned char cmd[2];
-  unsigned char ok;
-
-  while (len-- > 0){
-    cmd[0] = eeprom_offset++;
-    cmd[1] = *buf++;
-    ok = i2c_write(i2c_addr, cmd, 2);
-    mdelay(10);		// delay 10ms worst case write time
-    if (!ok)
-      return 0;
-  }
-  return 1;
-}
-
-#endif
diff --git a/firmware/fx2/src/usrp1/eeprom_io.h b/firmware/fx2/src/usrp1/eeprom_io.h
deleted file mode 100644
index 558017b12..000000000
--- a/firmware/fx2/src/usrp1/eeprom_io.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2006 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef INCLUDED_EEPROM_IO_H
-#define INCLUDED_EEPROM_IO_H
-
-
-// returns non-zero if successful, else 0
-unsigned char
-eeprom_read (unsigned char i2c_addr, unsigned char eeprom_offset,
-	     xdata unsigned char *buf, unsigned char len);
-
-// returns non-zero if successful, else 0
-unsigned char
-eeprom_write (unsigned char i2c_addr, unsigned char eeprom_offset,
-	      const xdata unsigned char *buf, unsigned char len);
-
-
-#endif /* INCLUDED_EEPROM_IO_H */
diff --git a/firmware/fx2/src/usrp1/fpga_load.c b/firmware/fx2/src/usrp1/fpga_load.c
deleted file mode 100644
index b0256e925..000000000
--- a/firmware/fx2/src/usrp1/fpga_load.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../common/fpga_load.c"
diff --git a/firmware/fx2/src/usrp1/fpga_rev2.c b/firmware/fx2/src/usrp1/fpga_rev2.c
deleted file mode 100644
index cca961dc4..000000000
--- a/firmware/fx2/src/usrp1/fpga_rev2.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2004 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#include "fpga.h"
-#include "fpga_regs_common.h"
-#include "usrp_common.h"
-#include "usrp_globals.h"
-#include "spi.h"
-
-unsigned char g_tx_reset = 0;
-unsigned char g_rx_reset = 0;
-
-void
-fpga_write_reg (unsigned char regno, const xdata unsigned char *regval)
-{
-  spi_write (0, 0x00 | (regno & 0x7f),
-	     SPI_ENABLE_FPGA,
-	     SPI_FMT_MSB | SPI_FMT_HDR_1,
-	     regval, 4);
-}
-
-
-static xdata unsigned char regval[4] = {0, 0, 0, 0};
-
-static void
-write_fpga_master_ctrl (void)
-{
-  unsigned char v = 0;
-  if (g_tx_enable)
-    v |= bmFR_MC_ENABLE_TX;
-  if (g_rx_enable)
-    v |= bmFR_MC_ENABLE_RX;
-  if (g_tx_reset)
-    v |= bmFR_MC_RESET_TX;
-  if (g_rx_reset)
-    v |= bmFR_MC_RESET_RX;
-  regval[3] = v;
-
-  fpga_write_reg (FR_MASTER_CTRL, regval);
-}
-
-// Resets both AD9862's and the FPGA serial bus interface.
-
-void
-fpga_set_reset (unsigned char on)
-{
-  on &= 0x1;
-
-  if (on){
-    USRP_PC &= ~bmPC_nRESET;		// active low
-    g_tx_enable = 0;
-    g_rx_enable = 0;
-    g_tx_reset = 0;
-    g_rx_reset = 0;
-  }
-  else
-    USRP_PC |= bmPC_nRESET;
-}
-
-void
-fpga_set_tx_enable (unsigned char on)
-{
-  on &= 0x1;
-  g_tx_enable = on;
-
-  write_fpga_master_ctrl ();
-
-  if (on){
-    g_tx_underrun = 0;
-    fpga_clear_flags ();
-  }
-}
-
-void
-fpga_set_rx_enable (unsigned char on)
-{
-  on &= 0x1;
-  g_rx_enable = on;
-  
-  write_fpga_master_ctrl ();
-  if (on){
-    g_rx_overrun = 0;
-    fpga_clear_flags ();
-  }
-}
-
-void
-fpga_set_tx_reset (unsigned char on)
-{
-  on &= 0x1;
-  g_tx_reset = on;
-
-  write_fpga_master_ctrl ();
-}
-
-void
-fpga_set_rx_reset (unsigned char on)
-{
-  on &= 0x1;
-  g_rx_reset = on;
-  
-  write_fpga_master_ctrl ();
-}
diff --git a/firmware/fx2/src/usrp1/fpga_rev2.h b/firmware/fx2/src/usrp1/fpga_rev2.h
deleted file mode 100644
index 54ec3f9fa..000000000
--- a/firmware/fx2/src/usrp1/fpga_rev2.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003,2004 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#ifndef INCLUDED_FPGA_REV1_H
-#define INCLUDED_FPGA_REV1_H
-
-void fpga_set_reset (unsigned char v);
-void fpga_set_tx_enable (unsigned char v);
-void fpga_set_rx_enable (unsigned char v);
-void fpga_set_tx_reset (unsigned char v);
-void fpga_set_rx_reset (unsigned char v);
-
-unsigned char fpga_has_room_for_packet (void);
-unsigned char fpga_has_packet_avail (void);
-
-#if (UC_BOARD_HAS_FPGA)
-/*
- * return TRUE iff FPGA internal fifo has room for 512 bytes.
- */
-#define fpga_has_room_for_packet()	(GPIFREADYSTAT & bmFPGA_HAS_SPACE)
-
-/*
- * return TRUE iff FPGA internal fifo has at least 512 bytes available.
- */
-#define fpga_has_packet_avail()		(GPIFREADYSTAT & bmFPGA_PKT_AVAIL)
-
-#else	/* no FPGA on board.  fake it. */
-
-#define fpga_has_room_for_packet()	TRUE
-#define	fpga_has_packet_avail()		TRUE
-
-#endif
-
-#define	fpga_clear_flags()				\
-	do {						\
-	  USRP_PE |= bmPE_FPGA_CLR_STATUS;		\
-	  USRP_PE &= ~bmPE_FPGA_CLR_STATUS;		\
-        } while (0)
-
-
-#endif /* INCLUDED_FPGA_REV1_H */
diff --git a/firmware/fx2/src/usrp1/gpif.c b/firmware/fx2/src/usrp1/gpif.c
deleted file mode 100644
index f6745a43b..000000000
--- a/firmware/fx2/src/usrp1/gpif.c
+++ /dev/null
@@ -1,292 +0,0 @@
-// This program configures the General Programmable Interface (GPIF) for FX2.     
-// Please do not modify sections of text which are marked as "DO NOT EDIT ...". 
-//                                                                                
-// DO NOT EDIT ...                  
-// GPIF Initialization              
-// Interface Timing      Async        
-// Internal Ready Init   IntRdy=1     
-// CTL Out Tristate-able Binary       
-// SingleWrite WF Select     1     
-// SingleRead WF Select      0     
-// FifoWrite WF Select       3     
-// FifoRead WF Select        2     
-// Data Bus Idle Drive   Tristate     
-// END DO NOT EDIT                  
-                                    
-// DO NOT EDIT ...       
-// GPIF Wave Names       
-// Wave 0   = singlerd     
-// Wave 1   = singlewr     
-// Wave 2   = FIFORd       
-// Wave 3   = FIFOWr       
-                         
-// GPIF Ctrl Outputs   Level   
-// CTL 0    = WEN#     CMOS        
-// CTL 1    = REN#     CMOS        
-// CTL 2    = OE#      CMOS        
-// CTL 3    = CLRST    CMOS        
-// CTL 4    = unused   CMOS        
-// CTL 5    = BOGUS    CMOS        
-                               
-// GPIF Rdy Inputs         
-// RDY0     = EF#            
-// RDY1     = FF#            
-// RDY2     = unused         
-// RDY3     = unused         
-// RDY4     = unused         
-// RDY5     = TCXpire        
-// FIFOFlag = FIFOFlag       
-// IntReady = IntReady       
-// END DO NOT EDIT         
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 0: singlerd                                                                
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode NO Data   NO Data   NO Data   NO Data   NO Data   NO Data   NO Data            
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
-//   Term A                                                                                
-//   LFunc                                                                                 
-//   Term B                                                                                
-// Branch1                                                                                 
-// Branch0                                                                                 
-// Re-Exec                                                                                 
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         0         0         0         0         0         0         0    
-// REN#         0         0         0         0         0         0         0         0    
-// OE#          0         0         0         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 1: singlewr                                                                
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode Activate  Activate  Activate  Activate  Activate  Activate  Activate           
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
-//   Term A           EF#                                                                  
-//   LFunc            AND                                                                  
-//   Term B           EF#                                                                  
-// Branch1            ThenIdle                                                             
-// Branch0            ElseIdle                                                             
-// Re-Exec            No                                                                   
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         1         1         1         1         1         1         0    
-// REN#         0         0         0         0         0         0         0         0    
-// OE#          0         0         0         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 2: FIFORd                                                                  
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode NO Data   Activate  NO Data   NO Data   NO Data   NO Data   NO Data            
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    IF        Wait 1    IF        Wait 1    Wait 1    Wait 1             
-//   Term A           TCXpire             TCXpire                                          
-//   LFunc            AND                 AND                                              
-//   Term B           TCXpire             TCXpire                                          
-// Branch1            Then 2              ThenIdle                                         
-// Branch0            Else 1              ElseIdle                                         
-// Re-Exec            No                  No                                               
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         0         0         0         0         0         0         0    
-// REN#         1         0         0         0         0         0         0         0    
-// OE#          1         1         1         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 3: FIFOWr                                                                  
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode NO Data   Activate  Activate  Activate  Activate  Activate  Activate           
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
-//   Term A           TCXpire                                                              
-//   LFunc            AND                                                                  
-//   Term B           TCXpire                                                              
-// Branch1            ThenIdle                                                             
-// Branch0            Else 1                                                               
-// Re-Exec            No                                                                   
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         0         0         0         0         0         0         0    
-// REN#         0         0         0         0         0         0         0         0    
-// OE#          0         0         0         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-                                              
-// GPIF Program Code                          
-                                              
-// DO NOT EDIT ...                            
-#include "fx2.h"                            
-#include "fx2regs.h"                        
-#include "fx2sdly.h"     // SYNCDELAY macro 
-// END DO NOT EDIT                            
-                                              
-// DO NOT EDIT ...                     
-const char xdata WaveData[128] =     
-{                                      
-// Wave 0 
-/* LenBr */ 0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
-// Wave 1 
-/* LenBr */ 0x01,     0x3F,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x22,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
-/* Output*/ 0x00,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x00,
-/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
-// Wave 2 
-/* LenBr */ 0x01,     0x11,     0x01,     0x3F,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x00,     0x03,     0x00,     0x01,     0x00,     0x00,     0x00,     0x00,
-/* Output*/ 0x06,     0x04,     0x04,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* LFun  */ 0x00,     0x2D,     0x00,     0x2D,     0x00,     0x00,     0x00,     0x3F,
-// Wave 3 
-/* LenBr */ 0x01,     0x39,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x00,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
-/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* LFun  */ 0x00,     0x2D,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
-};                     
-// END DO NOT EDIT     
-                       
-// DO NOT EDIT ...                     
-const char xdata FlowStates[36] =   
-{                                      
-/* Wave 0 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* Wave 1 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* Wave 2 FlowStates */ 0x81,0x2D,0x26,0x00,0x04,0x04,0x03,0x02,0x00,
-/* Wave 3 FlowStates */ 0x81,0x2D,0x21,0x00,0x04,0x04,0x03,0x02,0x00,
-};                     
-// END DO NOT EDIT     
-                       
-// DO NOT EDIT ...                                               
-const char xdata InitData[7] =                                   
-{                                                                
-/* Regs  */ 0xA0,0x00,0x00,0x00,0xEE,0x4E,0x00     
-};                                                               
-// END DO NOT EDIT                                               
-                                                                 
-// TO DO: You may add additional code below.
-
-void GpifInit( void )
-{
-  BYTE i;
- 
-  // Registers which require a synchronization delay, see section 15.14
-  // FIFORESET        FIFOPINPOLAR
-  // INPKTEND         OUTPKTEND
-  // EPxBCH:L         REVCTL
-  // GPIFTCB3         GPIFTCB2
-  // GPIFTCB1         GPIFTCB0
-  // EPxFIFOPFH:L     EPxAUTOINLENH:L
-  // EPxFIFOCFG       EPxGPIFFLGSEL
-  // PINFLAGSxx       EPxFIFOIRQ
-  // EPxFIFOIE        GPIFIRQ
-  // GPIFIE           GPIFADRH:L
-  // UDMACRCH:L       EPxGPIFTRIG
-  // GPIFTRIG
-  
-  // Note: The pre-REVE EPxGPIFTCH/L register are affected, as well...
-  //      ...these have been replaced by GPIFTC[B3:B0] registers
- 
-  // 8051 doesn't have access to waveform memories 'til
-  // the part is in GPIF mode.
- 
-  IFCONFIG = 0xEE;
-  // IFCLKSRC=1   , FIFOs executes on internal clk source
-  // xMHz=1       , 48MHz internal clk rate
-  // IFCLKOE=0    , Don't drive IFCLK pin signal at 48MHz
-  // IFCLKPOL=0   , Don't invert IFCLK pin signal from internal clk
-  // ASYNC=1      , master samples asynchronous
-  // GSTATE=1     , Drive GPIF states out on PORTE[2:0], debug WF
-  // IFCFG[1:0]=10, FX2 in GPIF master mode
- 
-  GPIFABORT = 0xFF;  // abort any waveforms pending
- 
-  GPIFREADYCFG = InitData[ 0 ];
-  GPIFCTLCFG = InitData[ 1 ];
-  GPIFIDLECS = InitData[ 2 ];
-  GPIFIDLECTL = InitData[ 3 ];
-  GPIFWFSELECT = InitData[ 5 ];
-  GPIFREADYSTAT = InitData[ 6 ];
- 
-  // use dual autopointer feature... 
-  AUTOPTRSETUP = 0x07;          // inc both pointers, 
-                                // ...warning: this introduces pdata hole(s)
-                                // ...at E67B (XAUTODAT1) and E67C (XAUTODAT2)
-  
-  // source
-  AUTOPTRH1 = MSB( &WaveData );
-  AUTOPTRL1 = LSB( &WaveData );
-  
-  // destination
-  AUTOPTRH2 = 0xE4;
-  AUTOPTRL2 = 0x00;
- 
-  // transfer
-  for ( i = 0x00; i < 128; i++ )
-  {
-    EXTAUTODAT2 = EXTAUTODAT1;
-  }
- 
-// Configure GPIF Address pins, output initial value,
-  PORTCCFG = 0xFF;    // [7:0] as alt. func. GPIFADR[7:0]
-  OEC = 0xFF;         // and as outputs
-  PORTECFG |= 0x80;   // [8] as alt. func. GPIFADR[8]
-  OEE |= 0x80;        // and as output
- 
-// ...OR... tri-state GPIFADR[8:0] pins
-//  PORTCCFG = 0x00;  // [7:0] as port I/O
-//  OEC = 0x00;       // and as inputs
-//  PORTECFG &= 0x7F; // [8] as port I/O
-//  OEE &= 0x7F;      // and as input
- 
-// GPIF address pins update when GPIFADRH/L written
-  SYNCDELAY;                    // 
-  GPIFADRH = 0x00;    // bits[7:1] always 0
-  SYNCDELAY;                    // 
-  GPIFADRL = 0x00;    // point to PERIPHERAL address 0x0000
- 
-// Configure GPIF FlowStates registers for Wave 0 of WaveData
-  FLOWSTATE = FlowStates[ 0 ];
-  FLOWLOGIC = FlowStates[ 1 ];
-  FLOWEQ0CTL = FlowStates[ 2 ];
-  FLOWEQ1CTL = FlowStates[ 3 ];
-  FLOWHOLDOFF = FlowStates[ 4 ];
-  FLOWSTB = FlowStates[ 5 ];
-  FLOWSTBEDGE = FlowStates[ 6 ];
-  FLOWSTBHPERIOD = FlowStates[ 7 ];
-}
- 
diff --git a/firmware/fx2/src/usrp1/gpif.gpf b/firmware/fx2/src/usrp1/gpif.gpf
deleted file mode 100755
index 854e25399..000000000
--- a/firmware/fx2/src/usrp1/gpif.gpf
+++ /dev/null
diff --git a/firmware/fx2/src/usrp1/init_gpif.c b/firmware/fx2/src/usrp1/init_gpif.c
deleted file mode 100644
index 0f5944b3b..000000000
--- a/firmware/fx2/src/usrp1/init_gpif.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../common/init_gpif.c"
diff --git a/firmware/fx2/src/usrp1/spi.c b/firmware/fx2/src/usrp1/spi.c
deleted file mode 100644
index 0aaffea5d..000000000
--- a/firmware/fx2/src/usrp1/spi.c
+++ /dev/null
@@ -1,472 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2004,2006 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#include "spi.h"
-#include "usrp_rev2_regs.h"
-
-static void
-setup_enables (unsigned char enables)
-{
-  // Software eanbles are active high.
-  // Hardware enables are active low.
-
-  // Uhh, the CODECs are active low, but the FPGA is active high...
-  enables ^= SPI_ENABLE_FPGA;
-
-  // KLUDGE: This code is fragile, but reasonably fast...
-  // low three bits of enables go into port A
-  USRP_PA = USRP_PA | (0x7 << 3);	// disable FPGA, CODEC_A, CODEC_B
-  USRP_PA ^= (enables & 0x7) << 3;	// enable specified devs
-
-  // high four bits of enables go into port E
-  USRP_PE = USRP_PE | (0xf << 4);	// disable TX_A, RX_A, TX_B, RX_B
-  USRP_PE ^= (enables & 0xf0);		// enable specified devs
-}
-
-#define disable_all()	setup_enables (0)
-
-void
-init_spi (void)
-{
-  disable_all ();		/* disable all devs	  */
-  bitS_OUT = 0;			/* idle state has CLK = 0 */
-}
-
-#if 0
-static unsigned char
-count_bits8 (unsigned char v)
-{
-  static unsigned char count4[16] = {
-    0,	// 0
-    1,	// 1
-    1,	// 2
-    2,	// 3
-    1,	// 4
-    2,	// 5
-    2,	// 6
-    3,	// 7
-    1,	// 8
-    2,	// 9
-    2,	// a
-    3,	// b
-    2,	// c
-    3,	// d
-    3,	// e
-    4	// f
-  };
-  return count4[v & 0xf] + count4[(v >> 4) & 0xf];
-}
-
-#else
-
-static unsigned char
-count_bits8 (unsigned char v)
-{
-  unsigned char count = 0;
-  if (v & (1 << 0)) count++;
-  if (v & (1 << 1)) count++;
-  if (v & (1 << 2)) count++;
-  if (v & (1 << 3)) count++;
-  if (v & (1 << 4)) count++;
-  if (v & (1 << 5)) count++;
-  if (v & (1 << 6)) count++;
-  if (v & (1 << 7)) count++;
-  return count;
-}
-#endif
-
-static void
-write_byte_msb (unsigned char v);
-
-unsigned char
-transact_byte_msb (unsigned char v);
-
-static void
-write_bytes_msb (const xdata unsigned char *buf, unsigned char len);
-
-static void
-read_bytes_msb (xdata unsigned char *buf, unsigned char len);
-
-static void
-transact_bytes_msb (xdata unsigned char *buf, unsigned char len);
-
-// returns non-zero if successful, else 0
-unsigned char
-spi_read (unsigned char header_hi, unsigned char header_lo,
-	  unsigned char enables, unsigned char format,
-	  xdata unsigned char *buf, unsigned char len)
-{
-  if (count_bits8 (enables) > 1)
-    return 0;		// error, too many enables set
-
-  setup_enables (enables);
-
-  if (format & SPI_FMT_LSB){		// order: LSB
-#if 1
-    return 0;		// error, not implemented
-#else
-    switch (format & SPI_FMR_HDR_MASK){
-    case SPI_FMT_HDR_0:
-      break;
-    case SPI_FMT_HDR_1:
-      write_byte_lsb (header_lo);
-      break;
-    case SPI_FMT_HDR_2:
-      write_byte_lsb (header_lo);
-      write_byte_lsb (header_hi);
-      break;
-    default:
-      return 0;		// error
-    }
-    if (len != 0)
-      read_bytes_lsb (buf, len);
-#endif
-  }
-
-  else {		// order: MSB
-
-    switch (format & SPI_FMT_HDR_MASK){
-    case SPI_FMT_HDR_0:
-      break;
-    case SPI_FMT_HDR_1:
-      write_byte_msb (header_lo);
-      break;
-    case SPI_FMT_HDR_2:
-      write_byte_msb (header_hi);
-      write_byte_msb (header_lo);
-      break;
-    default:
-      return 0;		// error
-    }
-    if (len != 0)
-      read_bytes_msb (buf, len);
-  }
-
-  disable_all ();
-  return 1;		// success
-}
-
-
-// returns non-zero if successful, else 0
-unsigned char
-spi_write (unsigned char header_hi, unsigned char header_lo,
-	   unsigned char enables, unsigned char format,
-	   const xdata unsigned char *buf, unsigned char len)
-{
-  setup_enables (enables);
-
-  if (format & SPI_FMT_LSB){		// order: LSB
-#if 1
-    return 0;		// error, not implemented
-#else
-    switch (format & SPI_FMR_HDR_MASK){
-    case SPI_FMT_HDR_0:
-      break;
-    case SPI_FMT_HDR_1:
-      write_byte_lsb (header_lo);
-      break;
-    case SPI_FMT_HDR_2:
-      write_byte_lsb (header_lo);
-      write_byte_lsb (header_hi);
-      break;
-    default:
-      return 0;		// error
-    }
-    if (len != 0)
-      write_bytes_lsb (buf, len);
-#endif
-  }
-
-  else {		// order: MSB
-
-    switch (format & SPI_FMT_HDR_MASK){
-    case SPI_FMT_HDR_0:
-      break;
-    case SPI_FMT_HDR_1:
-      write_byte_msb (header_lo);
-      break;
-    case SPI_FMT_HDR_2:
-      write_byte_msb (header_hi);
-      write_byte_msb (header_lo);
-      break;
-    default:
-      return 0;		// error
-    }
-    if (len != 0)
-      write_bytes_msb (buf, len);
-  }
-
-  disable_all ();
-  return 1;		// success
-}
-
-unsigned char
-spi_transact (unsigned char data0, unsigned char data1,
-              unsigned char data2, unsigned char data3,
-              unsigned char enables, xdata unsigned char *buf,
-              unsigned char len)
-{
-  if (count_bits8 (enables) > 1)
-    return 0;		// error, too many enables set
-
-  if (len > 4)
-    return 0;
-
-  setup_enables (enables);
-
-  buf[0] = data0;
-  buf[1] = data1;
-  buf[2] = data2; 
-  buf[3] = data3; 
-
-  if (len != 0)
-    transact_bytes_msb(buf, len);
-
-  disable_all ();
-  return 1;		// success
-}
-
-static unsigned char 
-transact_byte_msb (unsigned char v)
-{
-  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  v |= bitS_IN;                 // read into bottom bit
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  return v;
-}
-
-static void
-transact_bytes_msb (xdata unsigned char *buf, unsigned char len)
-{
-  while (len-- != 0){
-    *buf++ = transact_byte_msb (*buf);
-  }
-}
-
-static void
-write_byte_msb (unsigned char v)
-{
-  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  bitS_CLK = 0;
-
-  v = (v << 1) | (v >> 7);	// rotate left (MSB into bottom bit)
-  bitS_OUT = v & 0x1;
-  bitS_CLK = 1;
-  bitS_CLK = 0;
-}
-
-static void
-write_bytes_msb (const xdata unsigned char *buf, unsigned char len)
-{
-  while (len-- != 0){
-    write_byte_msb (*buf++);
-  }
-}
-
-#if 0
-/*
- * This is incorrectly compiled by SDCC 2.4.0
- */
-static unsigned char
-read_byte_msb (void)
-{
-  unsigned char v = 0;
-
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = v << 1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = v << 1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = v << 1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = v << 1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = v << 1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = v << 1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  v = v << 1;
-  bitS_CLK = 1;
-  v |= bitS_IN;
-  bitS_CLK = 0;
-
-  return v;
-}
-#else
-static unsigned char
-read_byte_msb (void) _naked
-{
-  _asm
-	clr	a
-
-	setb	_bitS_CLK
-        mov	c, _bitS_IN
-	rlc	a
-	clr	_bitS_CLK
-
-	setb	_bitS_CLK
-        mov	c, _bitS_IN
-	rlc	a
-	clr	_bitS_CLK
-
-	setb	_bitS_CLK
-        mov	c, _bitS_IN
-	rlc	a
-	clr	_bitS_CLK
-
-	setb	_bitS_CLK
-        mov	c, _bitS_IN
-	rlc	a
-	clr	_bitS_CLK
-
-	setb	_bitS_CLK
-        mov	c, _bitS_IN
-	rlc	a
-	clr	_bitS_CLK
-
-	setb	_bitS_CLK
-        mov	c, _bitS_IN
-	rlc	a
-	clr	_bitS_CLK
-
-	setb	_bitS_CLK
-        mov	c, _bitS_IN
-	rlc	a
-	clr	_bitS_CLK
-
-	setb	_bitS_CLK
-        mov	c, _bitS_IN
-	rlc	a
-	clr	_bitS_CLK
-
-	mov	dpl,a
-	ret
-  _endasm;
-}
-#endif
-
-static void
-read_bytes_msb (xdata unsigned char *buf, unsigned char len)
-{
-  while (len-- != 0){
-    *buf++ = read_byte_msb ();
-  }
-}
-
diff --git a/firmware/fx2/src/usrp1/spi.h b/firmware/fx2/src/usrp1/spi.h
deleted file mode 100644
index 5342b82b8..000000000
--- a/firmware/fx2/src/usrp1/spi.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2004 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef INCLUDED_SPI_H
-#define INCLUDED_SPI_H
-
-#include "usrp_spi_defs.h"
-
-void init_spi (void);		// one time call to init
-
-// returns non-zero if successful, else 0
-unsigned char
-spi_read (unsigned char header_hi, unsigned char header_lo,
-	  unsigned char enables, unsigned char format,
-	  xdata unsigned char *buf, unsigned char len);
-
-// returns non-zero if successful, else 0
-unsigned char
-spi_write (unsigned char header_hi, unsigned char header_lo,
-	   unsigned char enables, unsigned char format,
-	   const xdata unsigned char *buf, unsigned char len);
-
-// returns non-zero if successful, else 0
-unsigned char
-spi_transact (unsigned char data0, unsigned char data1,
-              unsigned char data2, unsigned char data3,
-	      unsigned char enables, xdata unsigned char *buf,
-              unsigned char len);
-
-
-#endif /* INCLUDED_SPI_H */
diff --git a/firmware/fx2/src/usrp1/usb_descriptors.a51 b/firmware/fx2/src/usrp1/usb_descriptors.a51
deleted file mode 100644
index a60adbef8..000000000
--- a/firmware/fx2/src/usrp1/usb_descriptors.a51
+++ /dev/null
@@ -1,404 +0,0 @@
-;;; -*- asm -*-
-;;;
-;;; Copyright 2003 Free Software Foundation, Inc.
-;;; 
-;;; This file is part of GNU Radio
-;;; 
-;;; GNU Radio is free software; you can redistribute it and/or modify
-;;; it under the terms of the GNU General Public License as published by
-;;; the Free Software Foundation; either version 3, or (at your option)
-;;; any later version.
-;;; 
-;;; GNU Radio is distributed in the hope that it will be useful,
-;;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-;;; GNU General Public License for more details.
-;;; 
-;;; You should have received a copy of the GNU General Public License
-;;; along with GNU Radio; see the file COPYING.  If not, write to
-;;; the Free Software Foundation, Inc., 51 Franklin Street,
-;;; Boston, MA 02110-1301, USA.
-;;;
-	
-;;; USB Descriptor table for the USRP
-;;; 
-;;; We're a high-speed only device (480 Mb/sec) with 1 configuration
-;;; and 3 interfaces.  
-;;; 
-;;;	interface 0:	command and status (ep0 COMMAND)
-;;;	interface 1:	Transmit path (ep2 OUT BULK)
-;;;	interface 2:	Receive path (ep6 IN BULK)
-
-	.module usb_descriptors
-	
-	VID_FREE	 = 0xfffe	; Free Software Folks
-	PID_USRP	 = 0x0002	; USRP
-
-	;; We distinguish configured from unconfigured USRPs using the Device ID.
-	;; If the MSB of the DID is 0, the device is unconfigured.
-	;; The LSB of the DID is reserved for hardware revs.
-	
-	DID_USRP	 = 0x0100	; Device ID (bcd)
-
-	
-	DSCR_DEVICE	 =   1	; Descriptor type: Device
-	DSCR_CONFIG	 =   2	; Descriptor type: Configuration
-	DSCR_STRING	 =   3	; Descriptor type: String
-	DSCR_INTRFC	 =   4	; Descriptor type: Interface
-	DSCR_ENDPNT	 =   5	; Descriptor type: Endpoint
-	DSCR_DEVQUAL	 =   6	; Descriptor type: Device Qualifier
-	
-	DSCR_DEVICE_LEN	 =  18
-	DSCR_CONFIG_LEN  =   9
-	DSCR_INTRFC_LEN  =   9
-	DSCR_ENDPNT_LEN  =   7
-	DSCR_DEVQUAL_LEN =  10
-	
-	ET_CONTROL	 =   0	; Endpoint type: Control
-	ET_ISO		 =   1	; Endpoint type: Isochronous
-	ET_BULK		 =   2	; Endpoint type: Bulk
-	ET_INT		 =   3	; Endpoint type: Interrupt
-	
-	
-	;; configuration attributes
-	bmSELF_POWERED	=	1 << 6
-
-;;; --------------------------------------------------------
-;;;	external ram data
-;;;--------------------------------------------------------
-	
-	.area USBDESCSEG    (XDATA)
-	
-;;; ----------------------------------------------------------------
-;;; descriptors used when operating at high speed (480Mb/sec)
-;;; ----------------------------------------------------------------
-	
-	.even	; descriptors must be 2-byte aligned for SUDPTR{H,L} to work
-
-	;; The .even directive isn't really honored by the linker.  Bummer!
-	;; (There's no way to specify an alignment requirement for a given area,
-	;; hence when they're concatenated together, even doesn't work.)
-	;; 
-	;; We work around this by telling the linker to put USBDESCSEG
-	;; at 0xE000 absolute.  This means that the maximimum length of this
-	;; segment is 480 bytes, leaving room for the two hash slots 
-	;; at 0xE1EO to 0xE1FF.  
-	;; 
-	;; As of July 7, 2004, this segment is 326 bytes long
-	
-_high_speed_device_descr::
-	.db	DSCR_DEVICE_LEN
-	.db	DSCR_DEVICE
-	.db	<0x0200		; Specification version (LSB)
-	.db	>0x0200		; Specification version (MSB)
-	.db	0xff		; device class (vendor specific)
-	.db	0xff		; device subclass (vendor specific)
-	.db	0xff		; device protocol (vendor specific)
-	.db	64		; bMaxPacketSize0 for endpoint 0
-	.db	<VID_FREE	; idVendor
-	.db	>VID_FREE	; idVendor
-	.db	<PID_USRP	; idProduct
-	.db	>PID_USRP	; idProduct
-_usb_desc_hw_rev_binary_patch_location_0::
-	.db	<DID_USRP	; bcdDevice
-	.db	>DID_USRP	; bcdDevice
-	.db	SI_VENDOR	; iManufacturer (string index)
-	.db	SI_PRODUCT	; iProduct (string index)
-	.db	SI_SERIAL	; iSerial number (string index)
-	.db	1		; bNumConfigurations
-	
-;;; describes the other speed (12Mb/sec)
-	.even
-_high_speed_devqual_descr::
-	.db	DSCR_DEVQUAL_LEN
-	.db	DSCR_DEVQUAL
-	.db	<0x0200		; bcdUSB (LSB)
-	.db	>0x0200		; bcdUSB (MSB)
-	.db	0xff		; bDeviceClass
-	.db	0xff		; bDeviceSubClass
-	.db	0xff		; bDeviceProtocol
-	.db	64		; bMaxPacketSize0
-	.db	1		; bNumConfigurations (one config at 12Mb/sec)
-	.db	0		; bReserved
-	
-	.even
-_high_speed_config_descr::	
-	.db	DSCR_CONFIG_LEN
-	.db	DSCR_CONFIG
-	.db	<(_high_speed_config_descr_end - _high_speed_config_descr) ; LSB
-	.db	>(_high_speed_config_descr_end - _high_speed_config_descr) ; MSB
-	.db	3		; bNumInterfaces
-	.db	1		; bConfigurationValue
-	.db	0		; iConfiguration
-	.db	0x80 | bmSELF_POWERED ; bmAttributes
-	.db	0		; bMaxPower
-
-	;; interface descriptor 0 (command & status, ep0 COMMAND)
-	
-	.db	DSCR_INTRFC_LEN
-	.db	DSCR_INTRFC
-	.db	0		; bInterfaceNumber (zero based)
-	.db	0		; bAlternateSetting
-	.db	0		; bNumEndpoints
-	.db	0xff		; bInterfaceClass (vendor specific)
-	.db	0xff		; bInterfaceSubClass (vendor specific)
-	.db	0xff		; bInterfaceProtocol (vendor specific)
-	.db	SI_COMMAND_AND_STATUS	; iInterface (description)
-
-	;; interface descriptor 1 (transmit path, ep2 OUT BULK)
-	
-	.db	DSCR_INTRFC_LEN
-	.db	DSCR_INTRFC
-	.db	1		; bInterfaceNumber (zero based)
-	.db	0		; bAlternateSetting
-	.db	1		; bNumEndpoints
-	.db	0xff		; bInterfaceClass (vendor specific)
-	.db	0xff		; bInterfaceSubClass (vendor specific)
-	.db	0xff		; bInterfaceProtocol (vendor specific)
-	.db	SI_TX_PATH	; iInterface (description)
-
-	;; interface 1's end point
-
-	.db	DSCR_ENDPNT_LEN
-	.db	DSCR_ENDPNT
-	.db	0x02		; bEndpointAddress (ep 2 OUT)
-	.db	ET_BULK		; bmAttributes
-	.db	<512		; wMaxPacketSize (LSB)
-	.db	>512		; wMaxPacketSize (MSB)
-	.db	0		; bInterval (iso only)
-
-	;; interface descriptor 2 (receive path, ep6 IN BULK)
-	
-	.db	DSCR_INTRFC_LEN
-	.db	DSCR_INTRFC
-	.db	2		; bInterfaceNumber (zero based)
-	.db	0		; bAlternateSetting
-	.db	1		; bNumEndpoints
-	.db	0xff		; bInterfaceClass (vendor specific)
-	.db	0xff		; bInterfaceSubClass (vendor specific)
-	.db	0xff		; bInterfaceProtocol (vendor specific)
-	.db	SI_RX_PATH	; iInterface (description)
-
-	;; interface 2's end point
-
-	.db	DSCR_ENDPNT_LEN
-	.db	DSCR_ENDPNT
-	.db	0x86		; bEndpointAddress (ep 6 IN)
-	.db	ET_BULK		; bmAttributes
-	.db	<512		; wMaxPacketSize (LSB)
-	.db	>512		; wMaxPacketSize (MSB)
-	.db	0		; bInterval (iso only)
-
-_high_speed_config_descr_end:		
-
-;;; ----------------------------------------------------------------
-;;; descriptors used when operating at full speed (12Mb/sec)
-;;; ----------------------------------------------------------------
-
-	.even
-_full_speed_device_descr::	
-	.db	DSCR_DEVICE_LEN
-	.db	DSCR_DEVICE
-	.db	<0x0200		; Specification version (LSB)
-	.db	>0x0200		; Specification version (MSB)
-	.db	0xff		; device class (vendor specific)
-	.db	0xff		; device subclass (vendor specific)
-	.db	0xff		; device protocol (vendor specific)
-	.db	64		; bMaxPacketSize0 for endpoint 0
-	.db	<VID_FREE	; idVendor
-	.db	>VID_FREE	; idVendor
-	.db	<PID_USRP	; idProduct
-	.db	>PID_USRP	; idProduct
-_usb_desc_hw_rev_binary_patch_location_1::
-	.db	<DID_USRP	; bcdDevice
-	.db	>DID_USRP	; bcdDevice
-	.db	SI_VENDOR	; iManufacturer (string index)
-	.db	SI_PRODUCT	; iProduct (string index)
-	.db	SI_NONE		; iSerial number (None)
-	.db	1		; bNumConfigurations
-	
-	
-;;; describes the other speed (480Mb/sec)
-	.even
-_full_speed_devqual_descr::
-	.db	DSCR_DEVQUAL_LEN
-	.db	DSCR_DEVQUAL
-	.db	<0x0200		; bcdUSB
-	.db	>0x0200		; bcdUSB
-	.db	0xff		; bDeviceClass
-	.db	0xff		; bDeviceSubClass
-	.db	0xff		; bDeviceProtocol
-	.db	64		; bMaxPacketSize0
-	.db	1		; bNumConfigurations (one config at 480Mb/sec)
-	.db	0		; bReserved
-	
-	.even
-_full_speed_config_descr::	
-	.db	DSCR_CONFIG_LEN
-	.db	DSCR_CONFIG
-	.db	<(_full_speed_config_descr_end - _full_speed_config_descr) ; LSB
-	.db	>(_full_speed_config_descr_end - _full_speed_config_descr) ; MSB
-	.db	1		; bNumInterfaces
-	.db	1		; bConfigurationValue
-	.db	0		; iConfiguration
-	.db	0x80 | bmSELF_POWERED ; bmAttributes
-	.db	0		; bMaxPower
-
-	;; interface descriptor 0 (command & status, ep0 COMMAND)
-	
-	.db	DSCR_INTRFC_LEN
-	.db	DSCR_INTRFC
-	.db	0		; bInterfaceNumber (zero based)
-	.db	0		; bAlternateSetting
-	.db	0		; bNumEndpoints
-	.db	0xff		; bInterfaceClass (vendor specific)
-	.db	0xff		; bInterfaceSubClass (vendor specific)
-	.db	0xff		; bInterfaceProtocol (vendor specific)
-	.db	SI_COMMAND_AND_STATUS	; iInterface (description)
-	
-_full_speed_config_descr_end:	
-	
-;;; ----------------------------------------------------------------
-;;;			string descriptors
-;;; ----------------------------------------------------------------
-
-_nstring_descriptors::
-	.db	(_string_descriptors_end - _string_descriptors) / 2
-
-_string_descriptors::
-	.db	<str0, >str0
-	.db	<str1, >str1
-	.db	<str2, >str2
-	.db	<str3, >str3
-	.db	<str4, >str4
-	.db	<str5, >str5
-	.db	<str6, >str6
-_string_descriptors_end:
-
-	SI_NONE = 0
-	;; str0 contains the language ID's.
-	.even
-str0:	.db	str0_end - str0
-	.db	DSCR_STRING
-	.db	0
-	.db	0
-	.db	<0x0409		; magic code for US English (LSB)
-	.db	>0x0409		; magic code for US English (MSB)
-str0_end:
-
-	SI_VENDOR = 1
-	.even
-str1:	.db	str1_end - str1
-	.db	DSCR_STRING
-	.db	'F, 0		; 16-bit unicode
-	.db	'r, 0
-	.db	'e, 0
-	.db	'e, 0
-	.db	' , 0
-	.db	'S, 0
-	.db	'o, 0
-	.db	'f, 0
-	.db	't, 0
-	.db	'w, 0
-	.db	'a, 0
-	.db	'r, 0
-	.db	'e, 0
-	.db	' , 0
-	.db	'F, 0
-	.db	'o, 0
-	.db	'l, 0
-	.db	'k, 0
-	.db	's, 0
-str1_end:
-
-	SI_PRODUCT = 2
-	.even
-str2:	.db	str2_end - str2
-	.db	DSCR_STRING
-	.db	'U, 0
-	.db	'S, 0
-	.db	'R, 0
-	.db	'P, 0
-	.db	' , 0
-	.db	'R, 0
-	.db	'e, 0
-	.db	'v, 0
-	.db	' , 0
-_usb_desc_hw_rev_ascii_patch_location_0::
-	.db	'?, 0
-str2_end:
-
-	SI_COMMAND_AND_STATUS = 3
-	.even
-str3:	.db	str3_end - str3
-	.db	DSCR_STRING
-	.db	'C, 0
-	.db	'o, 0
-	.db	'm, 0
-	.db	'm, 0
-	.db	'a, 0
-	.db	'n, 0
-	.db	'd, 0
-	.db	' , 0
-	.db	'&, 0
-	.db	' , 0
-	.db	'S, 0
-	.db	't, 0
-	.db	'a, 0
-	.db	't, 0
-	.db	'u, 0
-	.db	's, 0
-str3_end:
-
-	SI_TX_PATH = 4
-	.even
-str4:	.db	str4_end - str4
-	.db	DSCR_STRING
-	.db	'T, 0
-	.db	'r, 0
-	.db	'a, 0
-	.db	'n, 0
-	.db	's, 0
-	.db	'm, 0
-	.db	'i, 0
-	.db	't, 0
-	.db	' , 0
-	.db	'P, 0
-	.db	'a, 0
-	.db	't, 0
-	.db	'h, 0
-str4_end:
-
-	SI_RX_PATH = 5
-	.even
-str5:	.db	str5_end - str5
-	.db	DSCR_STRING
-	.db	'R, 0
-	.db	'e, 0
-	.db	'c, 0
-	.db	'e, 0
-	.db	'i, 0
-	.db	'v, 0
-	.db	'e, 0
-	.db	' , 0
-	.db	'P, 0
-	.db	'a, 0
-	.db	't, 0
-	.db	'h, 0
-str5_end:
-
-	SI_SERIAL = 6
-	.even
-str6:	.db	str6_end - str6
-	.db	DSCR_STRING
-_usb_desc_serial_number_ascii::
-	.db	'3, 0
-	.db	'., 0
-	.db	'1, 0
-	.db	'4, 0
-	.db	'1, 0
-	.db	'5, 0
-	.db	'9, 0
-	.db	'3, 0
-str6_end:
-
diff --git a/firmware/fx2/src/usrp1/usrp_common.c b/firmware/fx2/src/usrp1/usrp_common.c
deleted file mode 100644
index f389d9253..000000000
--- a/firmware/fx2/src/usrp1/usrp_common.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../common/usrp_common.c"
diff --git a/firmware/fx2/src/usrp1/usrp_common.h b/firmware/fx2/src/usrp1/usrp_common.h
deleted file mode 100644
index 738ba6b37..000000000
--- a/firmware/fx2/src/usrp1/usrp_common.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003,2006 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-/*
- * common defines and prototypes for USRP
- *
- * In comments below "TRM" refers to the EZ-USB FX2 Technical Reference Manual
- */
-
-#ifndef _USRPCOMMON_H_
-#define _USRPCOMMON_H_
-
-#include <usrp_config.h>
-#include <usrp_rev2_regs.h>
-#include <syncdelay.h>
-
-/*
- * From TRM page 15-105:
- *
- * Under certain conditions, some read and write access to the FX2
- * registers must be separated by a "synchronization delay".  The
- * delay is necessary only under the following conditions:
- *
- *   - between a write to any register in the 0xE600 - 0xE6FF range 
- *     and a write to one of the registers listed below.
- *
- *   - between a write to one of the registers listed below and a read 
- *     from any register in the 0xE600 - 0xE6FF range.
- *
- *   Registers which require a synchronization delay:
- *
- *	FIFORESET			FIFOPINPOLAR
- *	INPKTEND			EPxBCH:L
- *	EPxFIFOPFH:L			EPxAUTOINLENH:L
- *	EPxFIFOCFG			EPxGPIFFLGSEL
- *	PINFLAGSAB			PINFLAGSCD
- *	EPxFIFOIE			EPxFIFOIRQ
- *	GPIFIE				GPIFIRQ
- *	UDMACRCH:L			GPIFADRH:L
- *	GPIFTRIG			EPxGPIFTRIG
- *	OUTPKTEND			REVCTL
- *	GPIFTCB3			GPIFTCB2
- *	GPIFTCB1			GPIFTCB0
- */
-
-#define	TRUE		1
-#define	FALSE		0
-
-
-void init_usrp (void);
-void init_gpif (void);
-
-void set_led_0 (unsigned char on);
-void set_led_1 (unsigned char on);
-void toggle_led_0 (void);
-void toggle_led_1 (void);
-
-#define la_trace(v)
-
-#endif /* _USRPCOMMON_H_ */
diff --git a/firmware/fx2/src/usrp1/usrp_main.c b/firmware/fx2/src/usrp1/usrp_main.c
deleted file mode 100644
index b8c2e98ec..000000000
--- a/firmware/fx2/src/usrp1/usrp_main.c
+++ /dev/null
@@ -1,388 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003,2004 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#include "usrp_common.h"
-#include "usrp_commands.h"
-#include "fpga.h"
-#include "usrp_gpif_inline.h"
-#include "timer.h"
-#include "i2c.h"
-#include "isr.h"
-#include "usb_common.h"
-#include "fx2utils.h"
-#include "usrp_globals.h"
-#include "usrp_i2c_addr.h"
-#include <string.h>
-#include "spi.h"
-#include "eeprom_io.h"
-#include "usb_descriptors.h"
-
-/*
- * offsets into boot eeprom for configuration values
- */
-#define	HW_REV_OFFSET		  5
-#define SERIAL_NO_OFFSET	248
-#define SERIAL_NO_LEN		  8
-
-
-#define	bRequestType	SETUPDAT[0]
-#define	bRequest	SETUPDAT[1]
-#define	wValueL		SETUPDAT[2]
-#define	wValueH		SETUPDAT[3]
-#define	wIndexL		SETUPDAT[4]
-#define	wIndexH		SETUPDAT[5]
-#define	wLengthL	SETUPDAT[6]
-#define	wLengthH	SETUPDAT[7]
-
-
-unsigned char g_tx_enable = 0;
-unsigned char g_rx_enable = 0;
-unsigned char g_rx_overrun = 0;
-unsigned char g_tx_underrun = 0;
-
-/*
- * the host side fpga loader code pushes an MD5 hash of the bitstream
- * into hash1.
- */
-#define	  USRP_HASH_SIZE      16
-xdata at USRP_HASH_SLOT_1_ADDR unsigned char hash1[USRP_HASH_SIZE];
-
-static void
-get_ep0_data (void)
-{
-  EP0BCL = 0;			// arm EP0 for OUT xfer.  This sets the busy bit
-
-  while (EP0CS & bmEPBUSY)	// wait for busy to clear
-    ;
-}
-
-/*
- * Handle our "Vendor Extension" commands on endpoint 0.
- * If we handle this one, return non-zero.
- */
-unsigned char
-app_vendor_cmd (void)
-{
-  if (bRequestType == VRT_VENDOR_IN){
-
-    /////////////////////////////////
-    //    handle the IN requests
-    /////////////////////////////////
-
-    switch (bRequest){
-
-    case VRQ_GET_STATUS:
-      switch (wIndexL){
-
-      case GS_TX_UNDERRUN:
-	EP0BUF[0] = g_tx_underrun;
-	g_tx_underrun = 0;
-	EP0BCH = 0;
-	EP0BCL = 1;
-	break;
-
-      case GS_RX_OVERRUN:
-	EP0BUF[0] = g_rx_overrun;
-	g_rx_overrun = 0;
-	EP0BCH = 0;
-	EP0BCL = 1;
-	break;
-
-      default:
-	return 0;
-      }
-      break;
-
-    case VRQ_I2C_READ:
-      if (!i2c_read (wValueL, EP0BUF, wLengthL))
-	return 0;
-
-      EP0BCH = 0;
-      EP0BCL = wLengthL;
-      break;
-
-    case VRQ_SPI_READ:
-      if (!spi_read (wValueH, wValueL, wIndexH, wIndexL, EP0BUF, wLengthL))
-	return 0;
-
-      EP0BCH = 0;
-      EP0BCL = wLengthL;
-      break;
-
-    case VRQ_SPI_TRANSACT:
-      if (!spi_transact (wValueH, wValueL, wIndexH, wIndexL, wLengthH, EP0BUF, wLengthL))
-	return 0;
-
-      EP0BCH = 0;
-      EP0BCL = wLengthL;
-      break;
-
-    default:
-      return 0;
-    }
-  }
-
-  else if (bRequestType == VRT_VENDOR_OUT){
-
-    /////////////////////////////////
-    //    handle the OUT requests
-    /////////////////////////////////
-
-    switch (bRequest){
-
-    case VRQ_SET_LED:
-      switch (wIndexL){
-      case 0:
-	set_led_0 (wValueL);
-	break;
-	
-      case 1:
-	set_led_1 (wValueL);
-	break;
-	
-      default:
-	return 0;
-      }
-      break;
-      
-    case VRQ_FPGA_LOAD:
-      switch (wIndexL){			// sub-command
-      case FL_BEGIN:
-	return fpga_load_begin ();
-	
-      case FL_XFER:
-	get_ep0_data ();
-	return fpga_load_xfer (EP0BUF, EP0BCL);
-	
-      case FL_END:
-	return fpga_load_end ();
-	
-      default:
-	return 0;
-      }
-      break;
-      
-
-    case VRQ_FPGA_SET_RESET:
-      fpga_set_reset (wValueL);
-      break;
-      
-    case VRQ_FPGA_SET_TX_ENABLE:
-      fpga_set_tx_enable (wValueL);
-      break;
-      
-    case VRQ_FPGA_SET_RX_ENABLE:
-      fpga_set_rx_enable (wValueL);
-      break;
-
-    case VRQ_FPGA_SET_TX_RESET:
-      fpga_set_tx_reset (wValueL);
-      break;
-      
-    case VRQ_FPGA_SET_RX_RESET:
-      fpga_set_rx_reset (wValueL);
-      break;
-
-    case VRQ_I2C_WRITE:
-      get_ep0_data ();
-      if (!i2c_write (wValueL, EP0BUF, EP0BCL))
-	return 0;
-      break;
-
-    case VRQ_SPI_WRITE:
-      get_ep0_data ();
-      if (!spi_write (wValueH, wValueL, wIndexH, wIndexL, EP0BUF, EP0BCL))
-	return 0;
-      break;
-
-    default:
-      return 0;
-    }
-
-  }
-  else
-    return 0;    // invalid bRequestType
-
-  return 1;
-}
-
-
-
-static void
-main_loop (void)
-{
-  setup_flowstate_common ();
-
-  while (1){
-
-    if (usb_setup_packet_avail ())
-      usb_handle_setup_packet ();
-    
-  
-    if (GPIFTRIG & bmGPIF_IDLE){
-
-      // OK, GPIF is idle.  Let's try to give it some work.
-
-      // First check for underruns and overruns
-
-      if (UC_BOARD_HAS_FPGA && (USRP_PA & (bmPA_TX_UNDERRUN | bmPA_RX_OVERRUN))){
-      
-	// record the under/over run
-	if (USRP_PA & bmPA_TX_UNDERRUN)
-	  g_tx_underrun = 1;
-
-	if (USRP_PA & bmPA_RX_OVERRUN)
-	  g_rx_overrun = 1;
-
-	// tell the FPGA to clear the flags
-	fpga_clear_flags ();
-      }
-
-      // Next see if there are any "OUT" packets waiting for our attention,
-      // and if so, if there's room in the FPGA's FIFO for them.
-
-      if (g_tx_enable && !(EP24FIFOFLGS & 0x02)){  // USB end point fifo is not empty...
-
-	if (fpga_has_room_for_packet ()){	   // ... and FPGA has room for packet
-
-	  GPIFTCB1 = 0x01;	SYNCDELAY;
-	  GPIFTCB0 = 0x00;	SYNCDELAY;
-
-	  setup_flowstate_write ();
-
-	  SYNCDELAY;
-	  GPIFTRIG = bmGPIF_EP2_START | bmGPIF_WRITE; 	// start the xfer
-	  SYNCDELAY;
-
-	  while (!(GPIFTRIG & bmGPIF_IDLE)){
-	    // wait for the transaction to complete
-	  }
-	}
-      }
-
-      // See if there are any requests for "IN" packets, and if so
-      // whether the FPGA's got any packets for us.
-
-      if (g_rx_enable && !(EP6CS & bmEPFULL)){	// USB end point fifo is not full...
-
-	if (fpga_has_packet_avail ()){		// ... and FPGA has packet available
-
-	  GPIFTCB1 = 0x01;	SYNCDELAY;
-	  GPIFTCB0 = 0x00;	SYNCDELAY;
-
-	  setup_flowstate_read ();
-
-	  SYNCDELAY;
-	  GPIFTRIG = bmGPIF_EP6_START | bmGPIF_READ; 	// start the xfer
-	  SYNCDELAY;
-
-	  while (!(GPIFTRIG & bmGPIF_IDLE)){
-	    // wait for the transaction to complete
-	  }
-
-	  SYNCDELAY;
-	  INPKTEND = 6;	// tell USB we filled buffer (6 is our endpoint num)
-	}
-      }
-    }
-  }
-}
-
-
-/*
- * called at 100 Hz from timer2 interrupt
- *
- * Toggle led 0
- */
-void
-isr_tick (void) interrupt
-{
-  static unsigned char	count = 1;
-  
-  if (--count == 0){
-    count = 50;
-    USRP_LED_REG ^= bmLED0;
-  }
-
-  clear_timer_irq ();
-}
-
-/*
- * Read h/w rev code and serial number out of boot eeprom and
- * patch the usb descriptors with the values.
- */
-void
-patch_usb_descriptors(void)
-{
-  static xdata unsigned char hw_rev;
-  static xdata unsigned char serial_no[8];
-  unsigned char i;
-
-  eeprom_read(I2C_ADDR_BOOT, HW_REV_OFFSET, &hw_rev, 1);	// LSB of device id
-  usb_desc_hw_rev_binary_patch_location_0[0] = hw_rev;
-  usb_desc_hw_rev_binary_patch_location_1[0] = hw_rev;
-  usb_desc_hw_rev_ascii_patch_location_0[0] = hw_rev + '0';     // FIXME if we get > 9
-
-  eeprom_read(I2C_ADDR_BOOT, SERIAL_NO_OFFSET, serial_no, SERIAL_NO_LEN);
-
-  for (i = 0; i < SERIAL_NO_LEN; i++){
-    unsigned char ch = serial_no[i];
-    if (ch == 0xff)	// make unprogrammed EEPROM default to '0'
-      ch = '0';
-    usb_desc_serial_number_ascii[i << 1] = ch;
-  }
-}
-
-void
-main (void)
-{
-#if 0
-  g_rx_enable = 0;	// FIXME (work around initialization bug)
-  g_tx_enable = 0;
-  g_rx_overrun = 0;
-  g_tx_underrun = 0;
-#endif
-
-  memset (hash1, 0, USRP_HASH_SIZE);	// zero fpga bitstream hash.  This forces reload
-  
-  init_usrp ();
-  init_gpif ();
-  
-  // if (UC_START_WITH_GSTATE_OUTPUT_ENABLED)
-  IFCONFIG |= bmGSTATE;			// no conflict, start with it on
-
-  set_led_0 (0);
-  set_led_1 (0);
-  
-  EA = 0;		// disable all interrupts
-
-  patch_usb_descriptors();
-
-  setup_autovectors ();
-  usb_install_handlers ();
-  hook_timer_tick ((unsigned short) isr_tick);
-
-  EIEX4 = 1;		// disable INT4 FIXME
-  EA = 1;		// global interrupt enable
-
-  fx2_renumerate ();	// simulates disconnect / reconnect
-
-  main_loop ();
-}
diff --git a/firmware/fx2/src/usrp1/usrp_rev2_regs.h b/firmware/fx2/src/usrp1/usrp_rev2_regs.h
deleted file mode 100644
index a4f1d9896..000000000
--- a/firmware/fx2/src/usrp1/usrp_rev2_regs.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-/*
- * These are the register definitions for the Rev 1 USRP prototype
- * The Rev 1 is the version with the AD9862's and daughterboards
- */
-
-#ifndef _USRP_REV1_REGS_H_
-#define _USRP_REV1_REGS_H_
-
-#include "fx2regs.h"
-
-/*
- * Port A (bit addressable):
- */
-
-#define USRP_PA			IOA		// Port A
-#define	USRP_PA_OE		OEA		// Port A direction register
-
-#define bmPA_S_CLK		bmBIT0		// SPI serial clock
-#define	bmPA_S_DATA_TO_PERIPH	bmBIT1		// SPI SDI (peripheral rel name)
-#define bmPA_S_DATA_FROM_PERIPH	bmBIT2		// SPI SDO (peripheral rel name)
-#define bmPA_SEN_FPGA		bmBIT3		// serial enable for FPGA (active low)
-#define	bmPA_SEN_CODEC_A	bmBIT4		// serial enable AD9862 A (active low)
-#define	bmPA_SEN_CODEC_B	bmBIT5		// serial enable AD9862 B (active low)
-//#define bmPA_FX2_2		bmBIT6		// misc pin to FPGA (overflow)
-//#define bmPA_FX2_3		bmBIT7		// misc pin to FPGA (underflow)
-#define	bmPA_RX_OVERRUN		bmBIT6		// misc pin to FPGA (overflow)
-#define	bmPA_TX_UNDERRUN	bmBIT7		// misc pin to FPGA (underflow)
-
-
-sbit at 0x80+0 bitS_CLK;		// 0x80 is the bit address of PORT A
-sbit at 0x80+1 bitS_OUT;		// out from FX2 point of view
-sbit at 0x80+2 bitS_IN;			// in from FX2 point of view
-
-
-/* all outputs except S_DATA_FROM_PERIPH, FX2_2, FX2_3 */
-
-#define	bmPORT_A_OUTPUTS  (bmPA_S_CLK			\
-			   | bmPA_S_DATA_TO_PERIPH	\
-			   | bmPA_SEN_FPGA		\
-			   | bmPA_SEN_CODEC_A		\
-			   | bmPA_SEN_CODEC_B		\
-			   )
-
-#define	bmPORT_A_INITIAL   (bmPA_SEN_FPGA | bmPA_SEN_CODEC_A | bmPA_SEN_CODEC_B)
-
-
-/* Port B: GPIF	FD[7:0]			*/
-
-/*
- * Port C (bit addressable):
- *    5:1 FPGA configuration
- */
-
-#define	USRP_PC			IOC		// Port C
-#define	USRP_PC_OE		OEC		// Port C direction register
-
-#define	USRP_ALTERA_CONFIG	USRP_PC
-
-#define	bmPC_nRESET		bmBIT0		// reset line to codecs (active low)
-#define bmALTERA_DATA0		bmBIT1
-#define bmALTERA_NCONFIG	bmBIT2
-#define bmALTERA_DCLK		bmBIT3
-#define bmALTERA_CONF_DONE	bmBIT4
-#define bmALTERA_NSTATUS	bmBIT5
-#define	bmPC_LED0		bmBIT6		// active low
-#define	bmPC_LED1		bmBIT7		// active low
-
-sbit at 0xA0+1 bitALTERA_DATA0;		// 0xA0 is the bit address of PORT C
-sbit at 0xA0+3 bitALTERA_DCLK;
-
-
-#define	bmALTERA_BITS		(bmALTERA_DATA0			\
-				 | bmALTERA_NCONFIG		\
-				 | bmALTERA_DCLK		\
-				 | bmALTERA_CONF_DONE		\
-				 | bmALTERA_NSTATUS)
-
-#define	bmPORT_C_OUTPUTS	(bmPC_nRESET			\
-				 | bmALTERA_DATA0 		\
-				 | bmALTERA_NCONFIG		\
-				 | bmALTERA_DCLK		\
-				 | bmPC_LED0			\
-				 | bmPC_LED1			\
-				 )
-
-#define	bmPORT_C_INITIAL	(bmPC_LED0 | bmPC_LED1)
-
-
-#define	USRP_LED_REG		USRP_PC
-#define	bmLED0			bmPC_LED0
-#define	bmLED1			bmPC_LED1
-
-
-/* Port D: GPIF	FD[15:8]		*/
-
-/* Port E: not bit addressible		*/
-
-#define	USRP_PE			IOE		// Port E
-#define	USRP_PE_OE		OEE		// Port E direction register
-
-#define bmPE_PE0		bmBIT0		// GPIF debug output
-#define	bmPE_PE1		bmBIT1		// GPIF debug output
-#define	bmPE_PE2		bmBIT2		// GPIF debug output
-#define	bmPE_FPGA_CLR_STATUS	bmBIT3		// misc pin to FPGA (clear status)
-#define	bmPE_SEN_TX_A		bmBIT4		// serial enable d'board TX A (active low)
-#define	bmPE_SEN_RX_A		bmBIT5		// serial enable d'board RX A (active low)
-#define	bmPE_SEN_TX_B		bmBIT6		// serial enable d'board TX B (active low)
-#define bmPE_SEN_RX_B		bmBIT7		// serial enable d'board RX B (active low)
-
-
-#define	bmPORT_E_OUTPUTS	(bmPE_FPGA_CLR_STATUS	\
-				 | bmPE_SEN_TX_A 	\
-				 | bmPE_SEN_RX_A	\
-				 | bmPE_SEN_TX_B	\
-				 | bmPE_SEN_RX_B	\
-				 )
-
-
-#define	bmPORT_E_INITIAL	(bmPE_SEN_TX_A 		\
-				 | bmPE_SEN_RX_A	\
-				 | bmPE_SEN_TX_B	\
-				 | bmPE_SEN_RX_B	\
-				 )
-
-/*
- * FPGA output lines that are tied to FX2 RDYx inputs.
- * These are readable using GPIFREADYSTAT.
- */
-#define	bmFPGA_HAS_SPACE		bmBIT0	// usbrdy[0] has room for 512 byte packet
-#define	bmFPGA_PKT_AVAIL		bmBIT1	// usbrdy[1] has >= 512 bytes available
-// #define	bmTX_UNDERRUN			bmBIT2  // usbrdy[2] D/A ran out of data
-// #define	bmRX_OVERRUN			bmBIT3	// usbrdy[3] A/D ran out of buffer
-
-/*
- * FPGA input lines that are tied to the FX2 CTLx outputs.
- *
- * These are controlled by the GPIF microprogram...
- */
-// WR					bmBIT0	// usbctl[0]
-// RD					bmBIT1	// usbctl[1]
-// OE					bmBIT2	// usbctl[2]
-
-#endif /* _USRP_REV1_REGS_H_ */
diff --git a/firmware/fx2/src/usrp1/vectors.a51 b/firmware/fx2/src/usrp1/vectors.a51
deleted file mode 100644
index fa579ba8a..000000000
--- a/firmware/fx2/src/usrp1/vectors.a51
+++ /dev/null
@@ -1 +0,0 @@
-	.include "../common/vectors.a51"