Merge branch 'master' into usrp_e_next

18 files changed, 0 insertions, 1480 deletions

diff --git a/firmware/fx2/src/common/.gitignore b/firmware/fx2/src/common/.gitignore
deleted file mode 100644
index d46c52c00..000000000
--- a/firmware/fx2/src/common/.gitignore
+++ /dev/null
@@ -1,17 +0,0 @@
-/*.ihx
-/*.lnk
-/*.lst
-/*.map
-/*.mem
-/*.rel
-/*.rst
-/*.sym
-/blink_leds.asm
-/usrp_common.asm
-/command_loop.asm
-/fpga.asm
-/*.asm
-/usrp_gpif.c
-/usrp_gpif_inline.h
-/Makefile
-/Makefile.in
diff --git a/firmware/fx2/src/common/Makefile.am b/firmware/fx2/src/common/Makefile.am
deleted file mode 100644
index 95232324d..000000000
--- a/firmware/fx2/src/common/Makefile.am
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# Copyright 2004 Free Software Foundation, Inc.
-# 
-# This file is part of GNU Radio
-# 
-# GNU Radio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-# 
-# GNU Radio is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with GNU Radio; see the file COPYING.  If not, write to
-# the Free Software Foundation, Inc., 51 Franklin Street,
-# Boston, MA 02110-1301, USA.
-# 
-
-EXTRA_DIST = 			\
-	_startup.a51		\
-	blink_leds.c		\
-	check_mdelay.c		\
-	check_udelay.c		\
-	edit-gpif		\
-	fpga.h			\
-	fpga_load.h		\
-	fpga_load.c		\
-	gpif.c			\
-	gpif.gpf		\
-	init_gpif.c		\
-	usrp_common.c		\
-	usrp_globals.h		\
-	vectors.a51		\
-	build_eeprom.py		
-
-all: usrp_gpif.c
-
-usrp_gpif.c usrp_gpif_inline.h : gpif.c
-	srcdir=$(srcdir) $(PYTHON) $(srcdir)/edit-gpif $(srcdir)/gpif.c usrp_gpif.c usrp_gpif_inline.h
-
-CLEANFILES = \
-	*.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib \
-	usrp_gpif.c usrp_gpif_inline.h
-
-DISTCLEANFILES = \
-	*.ihx *.lnk *.lst *.map *.mem *.rel *.rst *.sym *.asm *.lib \
-	usrp_gpif.c usrp_gpif_inline.h 
diff --git a/firmware/fx2/src/common/_startup.a51 b/firmware/fx2/src/common/_startup.a51
deleted file mode 100644
index 30a907857..000000000
--- a/firmware/fx2/src/common/_startup.a51
+++ /dev/null
@@ -1,80 +0,0 @@
-;;; -*- asm -*-
-;;;
-;;; Copyright 2003,2004 Free Software Foundation, Inc.
-;;; 
-;;; This file is part of GNU Radio
-;;; 
-;;; GNU Radio is free software; you can redistribute it and/or modify
-;;; it under the terms of the GNU General Public License as published by
-;;; the Free Software Foundation; either version 3, or (at your option)
-;;; any later version.
-;;; 
-;;; GNU Radio is distributed in the hope that it will be useful,
-;;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-;;; GNU General Public License for more details.
-;;; 
-;;; You should have received a copy of the GNU General Public License
-;;; along with GNU Radio; see the file COPYING.  If not, write to
-;;; the Free Software Foundation, Inc., 51 Franklin Street,
-;;; Boston, MA 02110-1301, USA.
-
-    
-;;; The default external memory initialization provided by sdcc is not
-;;; appropriate to the FX2.  This is derived from the sdcc code, but uses 
-;;; the FX2 specific _MPAGE sfr.
-
-
-	;; .area XISEG   (XDATA)  ; the initialized external data area
-	;; .area XINIT   (CODE)	  ; the code space consts to init XISEG
-	.area XSEG    (XDATA)	  ; zero initialized xdata
-	.area USBDESCSEG (XDATA)  ; usb descriptors
-
-	
-	.area CSEG    (CODE)
-
-	;; sfr that sets upper address byte of MOVX using @r0 or @r1
-	_MPAGE	=	0x0092
-
-__sdcc_external_startup::
-	;; This system is now compiled with the --no-xinit-opt 
-	;; which means that any initialized XDATA is handled
-	;; inline by code in the GSINIT segs emitted for each file.
-	;; 
-	;; We zero XSEG and all of the internal ram to ensure 
-	;; a known good state for uninitialized variables.
-
-;	_mcs51_genRAMCLEAR() start
-	mov	r0,#l_XSEG
-	mov	a,r0
-	orl	a,#(l_XSEG >> 8)
-	jz	00002$
-	mov	r1,#((l_XSEG + 255) >> 8)
-	mov	dptr,#s_XSEG
-	clr     a
-	
-00001$:	movx	@dptr,a
-	inc	dptr
-	djnz	r0,00001$
-	djnz	r1,00001$
-	
-	;; We're about to clear internal memory.  This will overwrite
-	;; the stack which contains our return address.
-	;; Pop our return address into DPH, DPL
-00002$:	pop	dph
-	pop	dpl
-	
-	;; R0 and A contain 0.  This loop will execute 256 times.
-	;; 
-	;; FWIW the first iteration writes direct address 0x00,
-	;; which is the location of r0.  We get lucky, we're 
-	;; writing the correct value (0)
-	
-00003$:	mov	@r0,a
-	djnz	r0,00003$
-
-	push	dpl		; restore our return address
-	push	dph
-
-	mov	dpl,#0		; indicate that data init is still required
-	ret
diff --git a/firmware/fx2/src/common/_startup.a51.brittle b/firmware/fx2/src/common/_startup.a51.brittle
deleted file mode 100644
index 2996275cf..000000000
--- a/firmware/fx2/src/common/_startup.a51.brittle
+++ /dev/null
@@ -1,78 +0,0 @@
-;;; -*- asm -*-
-;;;
-;;; Copyright 2003 Free Software Foundation, Inc.
-;;; 
-;;; This file is part of GNU Radio
-;;; 
-;;; GNU Radio is free software; you can redistribute it and/or modify
-;;; it under the terms of the GNU General Public License as published by
-;;; the Free Software Foundation; either version 3, or (at your option)
-;;; any later version.
-;;; 
-;;; GNU Radio is distributed in the hope that it will be useful,
-;;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-;;; GNU General Public License for more details.
-;;; 
-;;; You should have received a copy of the GNU General Public License
-;;; along with GNU Radio; see the file COPYING.  If not, write to
-;;; the Free Software Foundation, Inc., 51 Franklin Street,
-;;; Boston, MA 02110-1301, USA.
-
-    
-;;; The default external memory initialization provided by sdcc is not
-;;; appropriate to the FX2.  This is derived from the sdcc code, but uses 
-;;; the FX2 specific _MPAGE sfr.
-
-
-	.area XISEG   (XDATA)	; the initialized external data area
-	.area XINIT   (CODE)	; the code space consts to init XISEG
-	.area XSEG    (XDATA)	; zero initialized xdata
-	.area USBDESCSEG (XDATA); usb descriptors
-
-	
-	;; BIG TIME KLUDGE!
-	;; Look at usrp_main.rst and count the bytes from our
-	;; "normal return location" to the first instruction following
-	;; the comment:	"_mcs51_getRAMCLEAR () start"
-	
-	INSTRUCTION_BYTES_TO_SKIP = 0x29	 ; valid for sdcc 2.4.0 
-	
-
-	.area CSEG    (CODE)
-
-	;; sfr that sets upper address byte of MOVX using @r0 or @r1
-	_MPAGE	=	0x0092
-
-__sdcc_external_startup::
-;	_mcs51_genXINIT() start
-	mov	r1,#l_XINIT
-	mov	a,r1
-	orl	a,#(l_XINIT >> 8)
-	jz	00003$
-	mov	r2,#((l_XINIT+255) >> 8)
-	mov	dptr,#s_XINIT
-	mov	r0,#s_XISEG
-	mov	_MPAGE,#(s_XISEG >> 8)
-00001$:	clr	a
-	movc	a,@a+dptr
-	movx	@r0,a
-	inc	dptr
-	inc	r0
-	cjne	r0,#0,00002$
-	inc	_MPAGE
-00002$:	djnz	r1,00001$
-	djnz	r2,00001$
-	mov	_MPAGE,#0xFF
-00003$:
-
-	;; Danger! Total KLUDGE!
-	;; We pop the return address, add a magic number to it
-	;; then jump to that address.  Believe it or not, this
-	;; looks like the least kludgy way to handle this,
-	;; short of patching the compiler...
-
-	pop	dph
-	pop	dpl
-	mov	a,#INSTRUCTION_BYTES_TO_SKIP
-	jmp	@a+dptr
diff --git a/firmware/fx2/src/common/blink_leds.c b/firmware/fx2/src/common/blink_leds.c
deleted file mode 100644
index 255c69733..000000000
--- a/firmware/fx2/src/common/blink_leds.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#include "usrp_common.h"
-
-void
-main (void)
-{
-  unsigned short	counter = 0;
-
-  init_usrp ();
-
-  while (1){
-    unsigned char counter_high = counter >> 8;
-    set_led_0 (counter_high & 0x40);
-    set_led_1 (counter_high & 0x80);
-    counter++;
-  }
-}
diff --git a/firmware/fx2/src/common/build_eeprom.py b/firmware/fx2/src/common/build_eeprom.py
deleted file mode 100755
index ae62587db..000000000
--- a/firmware/fx2/src/common/build_eeprom.py
+++ /dev/null
@@ -1,107 +0,0 @@
-#!/usr/bin/env python
-#
-# Copyright 2004,2006 Free Software Foundation, Inc.
-# 
-# This file is part of GNU Radio
-# 
-# GNU Radio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-# 
-# GNU Radio is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with GNU Radio; see the file COPYING.  If not, write to
-# the Free Software Foundation, Inc., 51 Franklin Street,
-# Boston, MA 02110-1301, USA.
-# 
-
-import re
-import sys
-import os, os.path
-from optparse import OptionParser
-
-# USB Vendor and Product ID's
-
-VID = 0xfffe                            # Free Software Folks
-PID = 0x0002                            # Universal Software Radio Peripheral
-    
-def msb (x):
-    return (x >> 8) & 0xff
-
-def lsb (x):
-    return x & 0xff
-
-def build_eeprom_image (filename, rev):
-    """Build a ``C2 Load'' EEPROM image.
-
-    For details on this format, see section 3.4.3 of
-    the EZ-USB FX2 Technical Reference Manual
-    """
-    # get the code we want to run
-    f = open(filename, 'rb')
-    bytes = f.read()
-
-    devid = rev
-    start_addr = 0 #prove me wrong
-
-    rom_header = [
-        0xC2,                           # boot from EEPROM
-        lsb (VID),
-        msb (VID),
-        lsb (PID),
-        msb (PID),
-        lsb (devid),
-        msb (devid),
-        0                               # configuration byte
-        ]
-    
-    # 4 byte header that indicates where to load
-    # the immediately follow code bytes.
-    code_header = [
-        msb (len (bytes)),
-        lsb (len (bytes)),
-        msb (start_addr),
-        lsb (start_addr)
-        ]
-
-    # writes 0 to CPUCS reg (brings FX2 out of reset)
-    trailer = [
-        0x80,
-        0x01,
-        0xe6,
-        0x00,
-        0x00
-        ]
-
-    image = rom_header + code_header + [ord(c) for c in bytes] + trailer
-
-    assert (len (image) <= 256)
-    return image 
-
-if __name__ == '__main__':
-    usage = "usage: %prog -r REV [options] bootfile.bin outfile.bin"
-    parser = OptionParser (usage=usage)
-    parser.add_option ("-r", "--rev", type="int", default=-1,
-                       help="Specify USRP revision number REV (2 or 4)")
-    (options, args) = parser.parse_args ()
-    if len (args) != 2:
-        parser.print_help ()
-        sys.exit (1)
-    if options.rev < 0:
-        sys.stderr.write (
-            "You must specify the USRP revision number (2 or 4) with -r REV\n")
-        sys.exit (1)
-
-    infile = args[0]
-    outfile = args[1]
-
-    image = "".join(chr(c) for c in build_eeprom_image(infile, options.rev))
-
-    f = open(outfile, 'wb')
-    f.write(str(image))
-    f.close()  
diff --git a/firmware/fx2/src/common/check_mdelay.c b/firmware/fx2/src/common/check_mdelay.c
deleted file mode 100644
index de1af47f6..000000000
--- a/firmware/fx2/src/common/check_mdelay.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#include "usrp_common.h"
-#include "delay.h"
-
-void
-main (void)
-{
-  init_usrp ();
-
-  // CPUCS = 0;		// 12 MHz
-  // CPUCS = bmCLKSPD0;	// 24 MHz
-  CPUCS = bmCLKSPD1;	// 48 MHz
-  
-  while (1){
-    USRP_LED_REG ^= bmLED0;
-    mdelay (10);
-  }
-}
diff --git a/firmware/fx2/src/common/check_udelay.c b/firmware/fx2/src/common/check_udelay.c
deleted file mode 100644
index 46885a067..000000000
--- a/firmware/fx2/src/common/check_udelay.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#include "usrp_common.h"
-#include "delay.h"
-
-void
-main (void)
-{
-  init_usrp ();
-
-  // CPUCS = 0;		// 12 MHz
-  // CPUCS = bmCLKSPD0;	// 24 MHz
-  CPUCS = bmCLKSPD1;	// 48 MHz
-  
-  while (1){
-    USRP_LED_REG ^= bmLED0;
-    udelay (250);
-  }
-}
diff --git a/firmware/fx2/src/common/edit-gpif b/firmware/fx2/src/common/edit-gpif
deleted file mode 100755
index 5367b75a5..000000000
--- a/firmware/fx2/src/common/edit-gpif
+++ /dev/null
@@ -1,114 +0,0 @@
-#!/usr/bin/env python
-# -*- Python -*-
-#
-# Copyright 2003 Free Software Foundation, Inc.
-# 
-# This file is part of GNU Radio
-# 
-# GNU Radio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-# 
-# GNU Radio is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with GNU Radio; see the file COPYING.  If not, write to
-# the Free Software Foundation, Inc., 51 Franklin Street,
-# Boston, MA 02110-1301, USA.
-# 
-
-
-# Edit the gpif.c file generated by the Cypress GPIF Designer Tool and
-# produce usrp_gpif.c, and usrp_gpif_inline.h, files suitable for our
-# uses.
-
-import re
-import string
-import sys
-
-def check_flow_state (line, flow_state_dict):
-    mo = re.match (r'/\* Wave (\d) FlowStates \*/ (.*),', line)
-    if mo:
-        wave = int (mo.group (1))
-        data = mo.group (2)
-        split = data.split (',', 8)
-        v = map (lambda x : int (x, 16), split)
-        # print "%s, %s" % (wave, data)
-        # print "split: ", split
-        # print "v    : ", v
-        flow_state_dict[wave] = v
-
-
-def delta (xseq, yseq):
-    # set subtraction
-    z = []
-    for x in xseq:
-        if x not in yseq:
-            z.append (x)
-    return z
-    
-
-def write_define (output, name, pairs):
-    output.write ('#define %s()\t\\\n' % name)
-    output.write ('do {\t\t\t\t\t\\\n')
-    for reg, val in pairs:
-        output.write ('%14s = 0x%02x;\t\t\t\\\n' % (reg, val))
-    output.write ('} while (0)\n\n')
-    
-def write_inlines (output, dict):
-    regs = ['FLOWSTATE', 'FLOWLOGIC', 'FLOWEQ0CTL', 'FLOWEQ1CTL', 'FLOWHOLDOFF',
-            'FLOWSTB', 'FLOWSTBEDGE', 'FLOWSTBHPERIOD', 'GPIFHOLDAMOUNT']
-
-    READ_FLOW_STATE = 2
-    WRITE_FLOW_STATE = 3
-
-    read_info = zip (regs, dict[READ_FLOW_STATE])
-    write_info = zip (regs, dict[WRITE_FLOW_STATE])
-    
-    output.write ('''/*
- * Machine generated by "edit-gpif".  Do not edit by hand.
- */
-
-''')
-    write_define (output, 'setup_flowstate_common', read_info)
-    write_define (output, 'setup_flowstate_read', delta (read_info, write_info))
-    write_define (output, 'setup_flowstate_write', delta (write_info, read_info))
-    
-
-def edit_gpif (input_name, output_name, inline_name):
-    input = open (input_name, 'r')
-    output = open (output_name, 'w')
-    inline = open (inline_name, 'w')
-    flow_state_dict = {}
-
-    output.write ('''/*
- * Machine generated by "edit-gpif".  Do not edit by hand.
- */
-
-''')
-    
-    while 1:
-        line = input.readline ()
-        line = string.replace (line, '\r','')
-        line = re.sub (r' *$', r'', line)
-
-        check_flow_state (line, flow_state_dict)
-
-        line = re.sub (r'#include', r'// #include', line)
-        line = re.sub (r'xdata ', r'', line)
-        if re.search (r'GpifInit', line):
-            break
-        
-        output.write (line)
-
-    output.close ()
-    write_inlines (inline, flow_state_dict)
-    inline.close ()
-
-
-# gpif.c usrp_gpif.c usrp_gpif_inline.h
-edit_gpif (sys.argv[1], sys.argv[2], sys.argv[3])
diff --git a/firmware/fx2/src/common/fpga.h b/firmware/fx2/src/common/fpga.h
deleted file mode 100644
index 6cd5de8e2..000000000
--- a/firmware/fx2/src/common/fpga.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2004 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-#ifndef INCLUDED_FPGA_H
-#define INCLUDED_FPGA_H
-
-#include "fpga_load.h"
-
-#if defined(HAVE_USRP2)
-#include "fpga_rev2.h"
-#endif
-
-#endif /* INCLUDED_FPGA_H */
diff --git a/firmware/fx2/src/common/fpga_load.c b/firmware/fx2/src/common/fpga_load.c
deleted file mode 100644
index c3ae9e707..000000000
--- a/firmware/fx2/src/common/fpga_load.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#include "usrp_common.h"
-#include "fpga_load.h"
-#include "delay.h"
-
-/*
- * setup altera FPGA serial load (PS).
- *
- * On entry:
- *	don't care
- *
- * On exit:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- */
-unsigned char
-fpga_load_begin (void)
-{
-  USRP_ALTERA_CONFIG &= ~bmALTERA_BITS;		// clear all bits (NCONFIG low)
-  udelay (40);					// wait 40 us
-  USRP_ALTERA_CONFIG |= bmALTERA_NCONFIG;	// set NCONFIG high
-
-  if (UC_BOARD_HAS_FPGA){
-    // FIXME should really cap this loop with a counter so we
-    //   don't hang forever on a hardware failure.
-    while ((USRP_ALTERA_CONFIG & bmALTERA_NSTATUS) == 0) // wait for NSTATUS to go high
-      ;
-  }
-
-  // ready to xfer now
-
-  return 1;
-}
-
-/*
- * clock out the low bit of bits.
- *
- * On entry:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- *
- * On exit:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- */
-
-
-#if 0
-
-static void
-clock_out_config_byte (unsigned char bits)
-{
-  unsigned char i;
-
-  // clock out configuration byte, least significant bit first
-
-  for (i = 0; i < 8; i++){
-
-    USRP_ALTERA_CONFIG = ((USRP_ALTERA_CONFIG & ~bmALTERA_DATA0) | ((bits & 1) ? bmALTERA_DATA0 : 0));
-    USRP_ALTERA_CONFIG |= bmALTERA_DCLK;		/* set DCLK to 1 */
-    USRP_ALTERA_CONFIG &= ~bmALTERA_DCLK;		/* set DCLK to 0 */
-
-    bits = bits >> 1;
-  }
-}
-	
-#else
-
-static void 
-clock_out_config_byte (unsigned char bits) _naked
-{
-    _asm
-	mov	a, dpl
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	rrc	a
-	mov	_bitALTERA_DATA0,c
-	setb	_bitALTERA_DCLK
-	clr	_bitALTERA_DCLK
-	
-	ret	
-
-    _endasm;
-}
-
-#endif
-
-static void
-clock_out_bytes (unsigned char bytecount,
-		 unsigned char xdata *p)
-{
-  while (bytecount-- > 0)
-    clock_out_config_byte (*p++);
-}
-
-/*
- * Transfer block of bytes from packet to FPGA serial configuration port
- *
- * On entry:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- *
- * On exit:
- *	ALTERA_DCLK    = 0
- *	ALTERA_NCONFIG = 1
- *	ALTERA_NSTATUS = 1 (input)
- */
-unsigned char
-fpga_load_xfer (xdata unsigned char *p, unsigned char bytecount)
-{
-  clock_out_bytes (bytecount, p);
-  return 1;
-}
-
-/*
- * check for successful load...
- */
-unsigned char
-fpga_load_end (void)
-{
-  unsigned char status = USRP_ALTERA_CONFIG;
-
-  if (!UC_BOARD_HAS_FPGA)			// always true if we don't have FPGA
-    return 1;
-
-  if ((status & bmALTERA_NSTATUS) == 0)		// failed to program
-    return 0;
-
-  if ((status & bmALTERA_CONF_DONE) == bmALTERA_CONF_DONE)
-    return 1;					// everything's cool
-
-  // I don't think this should happen.  It indicates that
-  // programming is still in progress.
-
-  return 0;
-}
diff --git a/firmware/fx2/src/common/fpga_load.h b/firmware/fx2/src/common/fpga_load.h
deleted file mode 100644
index 7c36a04c8..000000000
--- a/firmware/fx2/src/common/fpga_load.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* 
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#ifndef INCLUDED_FPGA_LOAD_H
-#define INCLUDED_FPGA_LOAD_H
-
-unsigned char fpga_load_begin (void);
-unsigned char fpga_load_xfer (xdata unsigned char *p, unsigned char len);
-unsigned char fpga_load_end (void);
-
-#endif /* INCLUDED_FPGA_LOAD_H */
diff --git a/firmware/fx2/src/common/gpif.c b/firmware/fx2/src/common/gpif.c
deleted file mode 100755
index 489e6e81a..000000000
--- a/firmware/fx2/src/common/gpif.c
+++ /dev/null
@@ -1,292 +0,0 @@
-// This program configures the General Programmable Interface (GPIF) for FX2.     
-// Please do not modify sections of text which are marked as "DO NOT EDIT ...". 
-//                                                                                
-// DO NOT EDIT ...                  
-// GPIF Initialization              
-// Interface Timing      Async        
-// Internal Ready Init   IntRdy=1     
-// CTL Out Tristate-able Binary       
-// SingleWrite WF Select     1     
-// SingleRead WF Select      0     
-// FifoWrite WF Select       3     
-// FifoRead WF Select        2     
-// Data Bus Idle Drive   Tristate     
-// END DO NOT EDIT                  
-                                    
-// DO NOT EDIT ...       
-// GPIF Wave Names       
-// Wave 0   = singlerd     
-// Wave 1   = singlewr     
-// Wave 2   = FIFORd       
-// Wave 3   = FIFOWr       
-                         
-// GPIF Ctrl Outputs   Level   
-// CTL 0    = WEN#     CMOS        
-// CTL 1    = REN#     CMOS        
-// CTL 2    = OE#      CMOS        
-// CTL 3    = CLRST    CMOS        
-// CTL 4    = unused   CMOS        
-// CTL 5    = BOGUS    CMOS        
-                               
-// GPIF Rdy Inputs         
-// RDY0     = EF#            
-// RDY1     = FF#            
-// RDY2     = unused         
-// RDY3     = unused         
-// RDY4     = unused         
-// RDY5     = TCXpire        
-// FIFOFlag = FIFOFlag       
-// IntReady = IntReady       
-// END DO NOT EDIT         
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 0: singlerd                                                                
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode NO Data   NO Data   NO Data   NO Data   NO Data   NO Data   NO Data            
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
-//   Term A                                                                                
-//   LFunc                                                                                 
-//   Term B                                                                                
-// Branch1                                                                                 
-// Branch0                                                                                 
-// Re-Exec                                                                                 
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         0         0         0         0         0         0         0    
-// REN#         0         0         0         0         0         0         0         0    
-// OE#          0         0         0         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 1: singlewr                                                                
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode Activate  Activate  Activate  Activate  Activate  Activate  Activate           
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
-//   Term A           EF#                                                                  
-//   LFunc            AND                                                                  
-//   Term B           EF#                                                                  
-// Branch1            ThenIdle                                                             
-// Branch0            ElseIdle                                                             
-// Re-Exec            No                                                                   
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         1         1         1         1         1         1         0    
-// REN#         0         0         0         0         0         0         0         0    
-// OE#          0         0         0         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 2: FIFORd                                                                  
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode NO Data   Activate  NO Data   NO Data   NO Data   NO Data   NO Data            
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    IF        Wait 1    IF        Wait 1    Wait 1    Wait 1             
-//   Term A           TCXpire             TCXpire                                          
-//   LFunc            AND                 AND                                              
-//   Term B           TCXpire             TCXpire                                          
-// Branch1            Then 2              ThenIdle                                         
-// Branch0            Else 1              ElseIdle                                         
-// Re-Exec            No                  No                                               
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         0         0         0         0         0         0         0    
-// REN#         0         0         0         0         0         0         0         0    
-// OE#          1         1         1         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-// DO NOT EDIT ...                                                                         
-//                                                                                         
-// GPIF Waveform 3: FIFOWr                                                                  
-//                                                                                         
-// Interval     0         1         2         3         4         5         6     Idle (7) 
-//          _________ _________ _________ _________ _________ _________ _________ _________
-//                                                                                         
-// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
-// DataMode NO Data   Activate  Activate  Activate  Activate  Activate  Activate           
-// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
-// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
-// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
-//   Term A           TCXpire                                                              
-//   LFunc            AND                                                                  
-//   Term B           TCXpire                                                              
-// Branch1            ThenIdle                                                             
-// Branch0            Else 1                                                               
-// Re-Exec            No                                                                   
-// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
-// WEN#         0         0         0         0         0         0         0         0    
-// REN#         0         0         0         0         0         0         0         0    
-// OE#          0         0         0         0         0         0         0         0    
-// CLRST        0         0         0         0         0         0         0         0    
-// unused       0         0         0         0         0         0         0         0    
-// BOGUS        0         0         0         0         0         0         0         0    
-//                     
-// END DO NOT EDIT     
-                                              
-// GPIF Program Code                          
-                                              
-// DO NOT EDIT ...                            
-#include "fx2.h"                            
-#include "fx2regs.h"                        
-#include "fx2sdly.h"     // SYNCDELAY macro 
-// END DO NOT EDIT                            
-                                              
-// DO NOT EDIT ...                     
-const char xdata WaveData[128] =     
-{                                      
-// Wave 0 
-/* LenBr */ 0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
-// Wave 1 
-/* LenBr */ 0x01,     0x3F,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x22,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
-/* Output*/ 0x00,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x00,
-/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
-// Wave 2 
-/* LenBr */ 0x01,     0x11,     0x01,     0x3F,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x00,     0x03,     0x00,     0x01,     0x00,     0x00,     0x00,     0x00,
-/* Output*/ 0x04,     0x04,     0x04,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* LFun  */ 0x00,     0x2D,     0x00,     0x2D,     0x00,     0x00,     0x00,     0x3F,
-// Wave 3 
-/* LenBr */ 0x01,     0x39,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
-/* Opcode*/ 0x00,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
-/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
-/* LFun  */ 0x00,     0x2D,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
-};                     
-// END DO NOT EDIT     
-                       
-// DO NOT EDIT ...                     
-const char xdata FlowStates[36] =   
-{                                      
-/* Wave 0 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* Wave 1 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* Wave 2 FlowStates */ 0x81,0x2D,0x26,0x00,0x04,0x04,0x03,0x02,0x00,
-/* Wave 3 FlowStates */ 0x81,0x2D,0x21,0x00,0x04,0x04,0x03,0x02,0x00,
-};                     
-// END DO NOT EDIT     
-                       
-// DO NOT EDIT ...                                               
-const char xdata InitData[7] =                                   
-{                                                                
-/* Regs  */ 0xA0,0x00,0x00,0x00,0xEE,0x4E,0x00     
-};                                                               
-// END DO NOT EDIT                                               
-                                                                 
-// TO DO: You may add additional code below.
-
-void GpifInit( void )
-{
-  BYTE i;
- 
-  // Registers which require a synchronization delay, see section 15.14
-  // FIFORESET        FIFOPINPOLAR
-  // INPKTEND         OUTPKTEND
-  // EPxBCH:L         REVCTL
-  // GPIFTCB3         GPIFTCB2
-  // GPIFTCB1         GPIFTCB0
-  // EPxFIFOPFH:L     EPxAUTOINLENH:L
-  // EPxFIFOCFG       EPxGPIFFLGSEL
-  // PINFLAGSxx       EPxFIFOIRQ
-  // EPxFIFOIE        GPIFIRQ
-  // GPIFIE           GPIFADRH:L
-  // UDMACRCH:L       EPxGPIFTRIG
-  // GPIFTRIG
-  
-  // Note: The pre-REVE EPxGPIFTCH/L register are affected, as well...
-  //      ...these have been replaced by GPIFTC[B3:B0] registers
- 
-  // 8051 doesn't have access to waveform memories 'til
-  // the part is in GPIF mode.
- 
-  IFCONFIG = 0xEE;
-  // IFCLKSRC=1   , FIFOs executes on internal clk source
-  // xMHz=1       , 48MHz internal clk rate
-  // IFCLKOE=0    , Don't drive IFCLK pin signal at 48MHz
-  // IFCLKPOL=0   , Don't invert IFCLK pin signal from internal clk
-  // ASYNC=1      , master samples asynchronous
-  // GSTATE=1     , Drive GPIF states out on PORTE[2:0], debug WF
-  // IFCFG[1:0]=10, FX2 in GPIF master mode
- 
-  GPIFABORT = 0xFF;  // abort any waveforms pending
- 
-  GPIFREADYCFG = InitData[ 0 ];
-  GPIFCTLCFG = InitData[ 1 ];
-  GPIFIDLECS = InitData[ 2 ];
-  GPIFIDLECTL = InitData[ 3 ];
-  GPIFWFSELECT = InitData[ 5 ];
-  GPIFREADYSTAT = InitData[ 6 ];
- 
-  // use dual autopointer feature... 
-  AUTOPTRSETUP = 0x07;          // inc both pointers, 
-                                // ...warning: this introduces pdata hole(s)
-                                // ...at E67B (XAUTODAT1) and E67C (XAUTODAT2)
-  
-  // source
-  AUTOPTRH1 = MSB( &WaveData );
-  AUTOPTRL1 = LSB( &WaveData );
-  
-  // destination
-  AUTOPTRH2 = 0xE4;
-  AUTOPTRL2 = 0x00;
- 
-  // transfer
-  for ( i = 0x00; i < 128; i++ )
-  {
-    EXTAUTODAT2 = EXTAUTODAT1;
-  }
- 
-// Configure GPIF Address pins, output initial value,
-  PORTCCFG = 0xFF;    // [7:0] as alt. func. GPIFADR[7:0]
-  OEC = 0xFF;         // and as outputs
-  PORTECFG |= 0x80;   // [8] as alt. func. GPIFADR[8]
-  OEE |= 0x80;        // and as output
- 
-// ...OR... tri-state GPIFADR[8:0] pins
-//  PORTCCFG = 0x00;  // [7:0] as port I/O
-//  OEC = 0x00;       // and as inputs
-//  PORTECFG &= 0x7F; // [8] as port I/O
-//  OEE &= 0x7F;      // and as input
- 
-// GPIF address pins update when GPIFADRH/L written
-  SYNCDELAY;                    // 
-  GPIFADRH = 0x00;    // bits[7:1] always 0
-  SYNCDELAY;                    // 
-  GPIFADRL = 0x00;    // point to PERIPHERAL address 0x0000
- 
-// Configure GPIF FlowStates registers for Wave 0 of WaveData
-  FLOWSTATE = FlowStates[ 0 ];
-  FLOWLOGIC = FlowStates[ 1 ];
-  FLOWEQ0CTL = FlowStates[ 2 ];
-  FLOWEQ1CTL = FlowStates[ 3 ];
-  FLOWHOLDOFF = FlowStates[ 4 ];
-  FLOWSTB = FlowStates[ 5 ];
-  FLOWSTBEDGE = FlowStates[ 6 ];
-  FLOWSTBHPERIOD = FlowStates[ 7 ];
-}
- 
diff --git a/firmware/fx2/src/common/gpif.gpf b/firmware/fx2/src/common/gpif.gpf
deleted file mode 100755
index a954ac193..000000000
--- a/firmware/fx2/src/common/gpif.gpf
+++ /dev/null
diff --git a/firmware/fx2/src/common/init_gpif.c b/firmware/fx2/src/common/init_gpif.c
deleted file mode 100644
index edde919be..000000000
--- a/firmware/fx2/src/common/init_gpif.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-#include "usrp_common.h"
-
-// These are the tables generated by the Cypress GPIF Designer
-
-extern const char WaveData[128];
-extern const char FlowStates[36];
-extern const char InitData[7];
-
-// The tool is kind of screwed up, in that it doesn't configure some
-// of the ports correctly.  We just use their tables and handle the
-// initialization ourselves.  They also declare that their static
-// initialized data is in xdata, which screws us too.
-
-void
-init_gpif (void)
-{
-  // we've already setup IFCONFIG before calling this...
-
-  GPIFABORT = 0xFF;  // abort any waveforms pending
-  SYNCDELAY;
- 
-  GPIFREADYCFG = InitData[ 0 ];
-  GPIFCTLCFG = InitData[ 1 ];
-  GPIFIDLECS = InitData[ 2 ];
-  GPIFIDLECTL = InitData[ 3 ];
-  // Hmmm, what's InitData[ 4 ] ...
-  GPIFWFSELECT = InitData[ 5 ];
-  // GPIFREADYSTAT = InitData[ 6 ];	// I think this register is read only...
- 
-  {
-    BYTE i;
-    
-    for (i = 0; i < 128; i++){
-      GPIF_WAVE_DATA[i] = WaveData[i];
-    }
-  }
- 
-  FLOWSTATE = 0;		/* ensure it's off */
-}
diff --git a/firmware/fx2/src/common/usrp_common.c b/firmware/fx2/src/common/usrp_common.c
deleted file mode 100644
index 0998653c2..000000000
--- a/firmware/fx2/src/common/usrp_common.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * USRP - Universal Software Radio Peripheral
- *
- * Copyright (C) 2003 Free Software Foundation, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
- */
-
-/* 
- * common code for USRP
- */
-
-#include "usrp_common.h"
-
-void init_board (void);
-
-void
-init_usrp (void)
-{
-  CPUCS = bmCLKSPD1;	// CPU runs @ 48 MHz
-  CKCON = 0;		// MOVX takes 2 cycles
-
-  // IFCLK is generated internally and runs at 48 MHz; GPIF "master mode"
-
-  IFCONFIG = bmIFCLKSRC | bm3048MHZ | bmIFCLKOE | bmIFCLKPOL | bmIFGPIF;
-  SYNCDELAY;
-
-  // configure IO ports (B and D are used by GPIF)
-
-  IOA = bmPORT_A_INITIAL;	// Port A initial state
-  OEA = bmPORT_A_OUTPUTS;	// Port A direction register
-
-  IOC = bmPORT_C_INITIAL;	// Port C initial state
-  OEC = bmPORT_C_OUTPUTS;	// Port C direction register
-
-  IOE = bmPORT_E_INITIAL;	// Port E initial state
-  OEE = bmPORT_E_OUTPUTS;	// Port E direction register
-
-
-  // REVCTL = bmDYN_OUT | bmENH_PKT;			// highly recommended by docs
-  // SYNCDELAY;
-  
-  // configure end points
-
-  EP1OUTCFG = bmVALID | bmBULK;				SYNCDELAY;
-  EP1INCFG  = bmVALID | bmBULK | bmIN;			SYNCDELAY;
-
-  EP2CFG    = bmVALID | bmBULK | bmQUADBUF;		SYNCDELAY;	// 512 quad bulk OUT
-  EP4CFG    = 0;					SYNCDELAY;	// disabled
-  EP6CFG    = bmVALID | bmBULK | bmQUADBUF | bmIN;	SYNCDELAY;	// 512 quad bulk IN
-  EP8CFG    = 0;					SYNCDELAY;	// disabled
-
-  // reset FIFOs
-
-  FIFORESET = bmNAKALL;					SYNCDELAY;
-  FIFORESET = 2;					SYNCDELAY;
-  // FIFORESET = 4;					SYNCDELAY;
-  FIFORESET = 6;					SYNCDELAY;
-  // FIFORESET = 8;					SYNCDELAY;
-  FIFORESET = 0;					SYNCDELAY;
-  
-  // configure end point FIFOs
-
-  // let core see 0 to 1 transistion of autoout bit
-
-  EP2FIFOCFG =             bmWORDWIDE;			SYNCDELAY;
-  EP2FIFOCFG = bmAUTOOUT | bmWORDWIDE;			SYNCDELAY;
-  EP6FIFOCFG = bmAUTOIN  | bmWORDWIDE;			SYNCDELAY;
-
-
-  // prime the pump 
-
-#if 0
-  EP2BCL  = 0x80;		SYNCDELAY;
-  EP2BCL  = 0x80;		SYNCDELAY;
-  EP2BCL  = 0x80;		SYNCDELAY;
-  EP2BCL  = 0x80;		SYNCDELAY;
-#endif
-
-  EP0BCH = 0;			SYNCDELAY;
-
-  // arm EP1OUT so we can receive "out" packets (TRM pg 8-8)
-
-  EP1OUTBC = 0;			SYNCDELAY;
-
-  EP2GPIFFLGSEL = 0x01;		SYNCDELAY; // For EP2OUT, GPIF uses EF flag
-  EP6GPIFFLGSEL = 0x02;		SYNCDELAY; // For EP6IN,  GPIF uses FF flag
-
-  // set autoin length for EP6
-  // FIXME should be f(enumeration)
-
-  EP6AUTOINLENH = (512) >> 8;	SYNCDELAY;  // this is the length for high speed
-  EP6AUTOINLENL = (512) & 0xff; SYNCDELAY;
-
-  init_board ();
-}
-
diff --git a/firmware/fx2/src/common/usrp_globals.h b/firmware/fx2/src/common/usrp_globals.h
deleted file mode 100644
index 445e9e6b4..000000000
--- a/firmware/fx2/src/common/usrp_globals.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* -*- c++ -*- */
-/*
- * Copyright 2003 Free Software Foundation, Inc.
- * 
- * This file is part of GNU Radio
- * 
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- * 
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-#ifndef _USRP_GLOBALS_H_
-#define _USRP_GLOBALS_H_
-
-extern unsigned char g_tx_enable;
-extern unsigned char g_rx_enable;
-extern unsigned char g_fpga_reset;
-extern unsigned char g_rx_overrun;
-extern unsigned char g_tx_underrun;
-
-
-#endif /* _USRP_GLOBALS_H_ */
diff --git a/firmware/fx2/src/common/vectors.a51 b/firmware/fx2/src/common/vectors.a51
deleted file mode 100644
index e9382ab84..000000000
--- a/firmware/fx2/src/common/vectors.a51
+++ /dev/null
@@ -1,180 +0,0 @@
-;;; -*- asm -*-
-;;;
-;;; Copyright 2003 Free Software Foundation, Inc.
-;;; 
-;;; This file is part of GNU Radio
-;;; 
-;;; GNU Radio is free software; you can redistribute it and/or modify
-;;; it under the terms of the GNU General Public License as published by
-;;; the Free Software Foundation; either version 3, or (at your option)
-;;; any later version.
-;;; 
-;;; GNU Radio is distributed in the hope that it will be useful,
-;;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-;;; GNU General Public License for more details.
-;;; 
-;;; You should have received a copy of the GNU General Public License
-;;; along with GNU Radio; see the file COPYING.  If not, write to
-;;; the Free Software Foundation, Inc., 51 Franklin Street,
-;;; Boston, MA 02110-1301, USA.
-;;; 
-
-;;; Interrupt vectors.
-
-;;; N.B. This object module must come first in the list of modules
-
-	.module vectors
-
-;;; ----------------------------------------------------------------
-;;;		  standard FX2 interrupt vectors
-;;; ----------------------------------------------------------------
-
-	.area CSEG (CODE)
-	.area GSINIT (CODE)
-	.area CSEG (CODE)
-__standard_interrupt_vector::
-__reset_vector::
-	ljmp	s_GSINIT
-	
-	;; 13 8-byte entries.  We point them all at __isr_nop
-	ljmp	__isr_nop	; 3 bytes
-	.ds	5		; + 5 = 8 bytes for vector slot
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-	ljmp	__isr_nop
-	.ds	5
-
-__isr_nop::
-	reti
-
-;;; ----------------------------------------------------------------
-;;; the FIFO/GPIF autovector.  14 4-byte entries.
-;;; must start on a 128 byte boundary.
-;;; ----------------------------------------------------------------
-	
-	. = __reset_vector + 0x0080
-		
-__fifo_gpif_autovector::
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-	ljmp	__isr_nop
-	nop	
-
-	
-;;; ----------------------------------------------------------------
-;;; the USB autovector.  32 4-byte entries.
-;;; must start on a 256 byte boundary.
-;;; ----------------------------------------------------------------
-
-	. = __reset_vector + 0x0100
-	
-__usb_autovector::
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop
-	ljmp	__isr_nop
-	nop