diff options
| author | jcorgan <jcorgan@221aa14e-8319-0410-a670-987f0aec2ac5> | 2008-09-08 01:00:12 +0000 |
|---|---|---|
| committer | jcorgan <jcorgan@221aa14e-8319-0410-a670-987f0aec2ac5> | 2008-09-08 01:00:12 +0000 |
| commit | 61f2f0214c5999ea42a368a4fc99f03d8eb28d1e (patch) | |
| tree | e7e24a9adc05ff1422fe3ada9926a51634741b47 /eth/rtl | |
| download | uhd-61f2f0214c5999ea42a368a4fc99f03d8eb28d1e.tar.gz uhd-61f2f0214c5999ea42a368a4fc99f03d8eb28d1e.tar.bz2 uhd-61f2f0214c5999ea42a368a4fc99f03d8eb28d1e.zip | |
Merged r9433:9527 from features/gr-usrp2 into trunk. Adds usrp2 and gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage.
git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5
Diffstat (limited to 'eth/rtl')
32 files changed, 8987 insertions, 0 deletions
diff --git a/eth/rtl/verilog/Clk_ctrl.v b/eth/rtl/verilog/Clk_ctrl.v new file mode 100644 index 000000000..917082644 --- /dev/null +++ b/eth/rtl/verilog/Clk_ctrl.v @@ -0,0 +1,133 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// Clk_ctrl.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: Clk_ctrl.v,v $
+// Revision 1.3 2006/01/19 14:07:52 maverickist
+// verification is complete.
+//
+// Revision 1.2 2005/12/16 06:44:13 Administrator
+// replaced tab with space.
+// passed 9.6k length frame test.
+//
+// Revision 1.1.1.1 2005/12/13 01:51:44 Administrator
+// no message
+//
+
+module Clk_ctrl(
+Reset ,
+Clk_125M ,
+//host interface,
+Speed ,
+//Phy interface ,
+Gtx_clk ,
+Rx_clk ,
+Tx_clk ,
+//interface clk ,
+MAC_tx_clk ,
+MAC_rx_clk ,
+MAC_tx_clk_div ,
+MAC_rx_clk_div
+);
+input Reset ;
+input Clk_125M ;
+ //host interface
+input [2:0] Speed ;
+ //Phy interface
+output Gtx_clk ;//used only in GMII mode
+input Rx_clk ;
+input Tx_clk ;//used only in MII mode
+ //interface clk signals
+output MAC_tx_clk ;
+output MAC_rx_clk ;
+output MAC_tx_clk_div ;
+output MAC_rx_clk_div ;
+
+
+// ******************************************************************************
+// internal signals
+// ******************************************************************************
+wire Rx_clk_div2 ;
+wire Tx_clk_div2 ;
+// ******************************************************************************
+//
+// ******************************************************************************
+ assign Gtx_clk = Clk_125M ;
+ assign MAC_rx_clk = Rx_clk ;
+ assign MAC_rx_clk_div = Rx_clk ;
+ assign MAC_tx_clk = Clk_125M;
+ assign MAC_tx_clk_div = Clk_125M;
+
+
+ /*
+eth_clk_div2 U_0_CLK_DIV2(
+.Reset (Reset ),
+.IN (Rx_clk ),
+.OUT (Rx_clk_div2 )
+);
+
+eth_clk_div2 U_1_CLK_DIV2(
+.Reset (Reset ),
+.IN (Tx_clk ),
+.OUT (Tx_clk_div2 )
+);
+
+eth_clk_switch U_0_CLK_SWITCH(
+.IN_0 (Rx_clk_div2 ),
+.IN_1 (Rx_clk ),
+.SW (Speed[2] ),
+.OUT (MAC_rx_clk_div )
+);
+
+eth_clk_switch U_1_CLK_SWITCH(
+.IN_0 (Tx_clk ),
+.IN_1 (Clk_125M ),
+.SW (Speed[2] ),
+.OUT (MAC_tx_clk )
+);
+
+eth_clk_switch U_2_CLK_SWITCH(
+.IN_0 (Tx_clk_div2 ),
+.IN_1 (Clk_125M ),
+.SW (Speed[2] ),
+.OUT (MAC_tx_clk_div )
+);
+
+ */
+endmodule
diff --git a/eth/rtl/verilog/MAC_rx.v b/eth/rtl/verilog/MAC_rx.v new file mode 100644 index 000000000..0e02e8fcc --- /dev/null +++ b/eth/rtl/verilog/MAC_rx.v @@ -0,0 +1,242 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// MAC_rx.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: MAC_rx.v,v $
+// Revision 1.4 2006/11/17 17:53:07 maverickist
+// no message
+//
+// Revision 1.3 2006/01/19 14:07:52 maverickist
+// verification is complete.
+//
+// Revision 1.2 2005/12/16 06:44:13 Administrator
+// replaced tab with space.
+// passed 9.6k length frame test.
+//
+// Revision 1.1.1.1 2005/12/13 01:51:44 Administrator
+// no message
+//
+
+module MAC_rx
+ #(parameter RX_FF_DEPTH = 9)
+ (
+input Reset ,
+input Clk_user,
+input Clk ,
+ //RMII interface
+input MCrs_dv ,
+input [7:0] MRxD ,
+input MRxErr ,
+ //flow_control signals
+output [15:0] pause_quanta,
+output pause_quanta_val,
+output [15:0] rx_fifo_space,
+ //user interface
+output Rx_mac_empty,
+input Rx_mac_rd ,
+output [31:0] Rx_mac_data ,
+output [1:0] Rx_mac_BE ,
+output Rx_mac_sop ,
+output Rx_mac_eop ,
+output Rx_mac_err ,
+ //CPU
+input MAC_rx_add_chk_en ,
+input [7:0] MAC_add_prom_data ,
+input [2:0] MAC_add_prom_add ,
+input MAC_add_prom_wr ,
+input broadcast_filter_en ,
+input [15:0] broadcast_bucket_depth ,
+input [15:0] broadcast_bucket_interval ,
+input RX_APPEND_CRC,
+input [4:0] Rx_Hwmark ,
+input [4:0] Rx_Lwmark ,
+input CRC_chk_en ,
+input [5:0] RX_IFG_SET ,
+input [15:0] RX_MAX_LENGTH ,// 1518
+input [6:0] RX_MIN_LENGTH ,// 64
+ //RMON interface
+output [15:0] Rx_pkt_length_rmon ,
+output Rx_apply_rmon ,
+output [2:0] Rx_pkt_err_type_rmon ,
+output [2:0] Rx_pkt_type_rmon ,
+
+ output [15:0] rx_fifo_occupied,
+ output rx_fifo_full,
+ output rx_fifo_empty,
+ output [31:0] debug
+);
+//******************************************************************************
+//internal signals
+//******************************************************************************
+ //CRC_chk interface
+wire CRC_en ;
+wire [7:0] CRC_data;
+wire CRC_init;
+wire CRC_err ;
+ //MAC_rx_add_chk interface
+wire MAC_add_en ;
+wire [7:0] MAC_add_data;
+wire MAC_rx_add_chk_err ;
+ //broadcast_filter
+wire broadcast_ptr ;
+wire broadcast_drop ;
+ //MAC_rx_ctrl interface
+wire [7:0] Fifo_data ;
+wire Fifo_data_en ;
+wire Fifo_full ;
+wire Fifo_data_err ;
+wire Fifo_data_drop ;
+wire Fifo_data_end ;
+
+
+//******************************************************************************
+//instantiation
+//******************************************************************************
+
+
+MAC_rx_ctrl U_MAC_rx_ctrl(
+.Reset (Reset ),
+.Clk (Clk ),
+ //RMII interface ( //RMII interface ),
+.MCrs_dv (MCrs_dv ),
+.MRxD (MRxD ),
+.MRxErr (MRxErr ),
+ //CRC_chk interface (//CRC_chk interface ),
+.CRC_en (CRC_en ),
+.CRC_data (CRC_data ),
+.CRC_init (CRC_init ),
+.CRC_err (CRC_err ),
+ //MAC_rx_add_chk interface (//MAC_rx_add_chk interface),
+.MAC_add_en (MAC_add_en ),
+.MAC_add_data (MAC_add_data ),
+.MAC_rx_add_chk_err (MAC_rx_add_chk_err ),
+ //broadcast_filter (//broadcast_filter ),
+.broadcast_ptr (broadcast_ptr ),
+.broadcast_drop (broadcast_drop ),
+ //flow_control signals (//flow_control signals ),
+.pause_quanta (pause_quanta ),
+.pause_quanta_val (pause_quanta_val ),
+ //MAC_rx_FF interface (//MAC_rx_FF interface ),
+.Fifo_data (Fifo_data ),
+.Fifo_data_en (Fifo_data_en ),
+.Fifo_data_err (Fifo_data_err ),
+.Fifo_data_drop (Fifo_data_drop ),
+.Fifo_data_end (Fifo_data_end ),
+.Fifo_full (Fifo_full ),
+ //RMON interface (//RMON interface ),
+.Rx_pkt_type_rmon (Rx_pkt_type_rmon ),
+.Rx_pkt_length_rmon (Rx_pkt_length_rmon ),
+.Rx_apply_rmon (Rx_apply_rmon ),
+.Rx_pkt_err_type_rmon (Rx_pkt_err_type_rmon ),
+ //CPU (//CPU ),
+.RX_IFG_SET (RX_IFG_SET ),
+.RX_MAX_LENGTH (RX_MAX_LENGTH ),
+.RX_MIN_LENGTH (RX_MIN_LENGTH )
+);
+
+ assign debug = {28'd0, Fifo_data_en, Fifo_data_err, Fifo_data_end,Fifo_full};
+
+MAC_rx_FF #(.RX_FF_DEPTH(RX_FF_DEPTH)) U_MAC_rx_FF (
+.Reset (Reset ),
+.Clk_MAC (Clk ),
+.Clk_SYS (Clk_user ),
+ //MAC_rx_ctrl interface (//MAC_rx_ctrl interface ),
+.Fifo_data (Fifo_data ),
+.Fifo_data_en (Fifo_data_en ),
+.Fifo_full (Fifo_full ),
+.Fifo_data_err (Fifo_data_err ),
+//.Fifo_data_drop (Fifo_data_drop ),
+.Fifo_data_end (Fifo_data_end ),
+.Fifo_space (rx_fifo_space ),
+ //CPU (//CPU ),
+.Rx_Hwmark (Rx_Hwmark ),
+.Rx_Lwmark (Rx_Lwmark ),
+.RX_APPEND_CRC (RX_APPEND_CRC ),
+ //user interface (//user interface ),
+.Rx_mac_empty (Rx_mac_empty ),
+.Rx_mac_rd (Rx_mac_rd ),
+.Rx_mac_data (Rx_mac_data ),
+.Rx_mac_BE (Rx_mac_BE ),
+.Rx_mac_sop (Rx_mac_sop ),
+.Rx_mac_eop (Rx_mac_eop ),
+.Rx_mac_err (Rx_mac_err ),
+
+.fifo_occupied(rx_fifo_occupied),
+.fifo_full_dbg(rx_fifo_full),
+.fifo_empty(rx_fifo_empty)
+);
+
+ Broadcast_filter U_Broadcast_filter
+ (.Reset (Reset ),
+ .Clk (Clk ),
+ //MAC_rx_ctrl (//MAC_rx_ctrl ),
+ .broadcast_ptr (broadcast_ptr ),
+ .broadcast_drop (broadcast_drop ),
+ //FromCPU (//FromCPU ),
+ .broadcast_filter_en (broadcast_filter_en ),
+ .broadcast_bucket_depth (broadcast_bucket_depth ),
+ .broadcast_bucket_interval (broadcast_bucket_interval )
+ );
+
+CRC_chk U_CRC_chk(
+.Reset (Reset ),
+.Clk (Clk ),
+.CRC_data (CRC_data ),
+.CRC_init (CRC_init ),
+.CRC_en (CRC_en ),
+ //From CPU (//From CPU ),
+.CRC_chk_en (CRC_chk_en ),
+.CRC_err (CRC_err )
+);
+
+ MAC_rx_add_chk U_MAC_rx_add_chk
+ (.Reset (Reset ),
+ .Clk (Clk ),
+ .Init (CRC_init ),
+ .data (MAC_add_data ),
+ .MAC_add_en (MAC_add_en ),
+ .MAC_rx_add_chk_err (MAC_rx_add_chk_err ),
+ //From CPU (//From CPU ),
+ .MAC_rx_add_chk_en (MAC_rx_add_chk_en ),
+ .MAC_add_prom_data (MAC_add_prom_data ),
+ .MAC_add_prom_add (MAC_add_prom_add ),
+ .MAC_add_prom_wr (MAC_add_prom_wr )
+ );
+
+endmodule // MAC_rx
diff --git a/eth/rtl/verilog/MAC_rx/Broadcast_filter.v b/eth/rtl/verilog/MAC_rx/Broadcast_filter.v new file mode 100644 index 000000000..bc95e31d7 --- /dev/null +++ b/eth/rtl/verilog/MAC_rx/Broadcast_filter.v @@ -0,0 +1,107 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// Broadcast_filter.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: Broadcast_filter.v,v $
+// Revision 1.3 2006/01/19 14:07:54 maverickist
+// verification is complete.
+//
+// Revision 1.2 2005/12/16 06:44:16 Administrator
+// replaced tab with space.
+// passed 9.6k length frame test.
+//
+// Revision 1.1.1.1 2005/12/13 01:51:45 Administrator
+// no message
+//
+
+module Broadcast_filter (
+Reset ,
+Clk ,
+//MAC_rx_ctrl ,
+broadcast_ptr ,
+broadcast_drop ,
+//FromCPU ,
+broadcast_filter_en ,
+broadcast_bucket_depth ,
+broadcast_bucket_interval
+);
+input Reset ;
+input Clk ;
+ //MAC_rx_ctrl
+input broadcast_ptr ;
+output broadcast_drop ;
+ //FromCPU ;
+input broadcast_filter_en ;
+input [15:0] broadcast_bucket_depth ;
+input [15:0] broadcast_bucket_interval ;
+
+//******************************************************************************
+//internal signals
+//******************************************************************************
+reg [15:0] time_counter ;
+reg [15:0] broadcast_counter ;
+reg broadcast_drop ;
+//******************************************************************************
+//
+//******************************************************************************
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ time_counter <=0;
+ else if (time_counter==broadcast_bucket_interval)
+ time_counter <=0;
+ else
+ time_counter <=time_counter+1;
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ broadcast_counter <=0;
+ else if (time_counter==broadcast_bucket_interval)
+ broadcast_counter <=0;
+ else if (broadcast_ptr&&broadcast_counter!=broadcast_bucket_depth)
+ broadcast_counter <=broadcast_counter+1;
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ broadcast_drop <=0;
+ else if(broadcast_filter_en&&broadcast_counter==broadcast_bucket_depth)
+ broadcast_drop <=1;
+ else
+ broadcast_drop <=0;
+
+endmodule
\ No newline at end of file diff --git a/eth/rtl/verilog/MAC_rx/CRC_chk.v b/eth/rtl/verilog/MAC_rx/CRC_chk.v new file mode 100644 index 000000000..d6bb22b51 --- /dev/null +++ b/eth/rtl/verilog/MAC_rx/CRC_chk.v @@ -0,0 +1,128 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// CRC_chk.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: CRC_chk.v,v $
+// Revision 1.3 2006/01/19 14:07:54 maverickist
+// verification is complete.
+//
+// Revision 1.2 2005/12/16 06:44:16 Administrator
+// replaced tab with space.
+// passed 9.6k length frame test.
+//
+// Revision 1.1.1.1 2005/12/13 01:51:45 Administrator
+// no message
+//
+
+module CRC_chk(
+Reset ,
+Clk ,
+CRC_data ,
+CRC_init ,
+CRC_en ,
+//From CPU
+CRC_chk_en ,
+CRC_err
+);
+input Reset ;
+input Clk ;
+input[7:0] CRC_data ;
+input CRC_init ;
+input CRC_en ;
+ //From CPU
+input CRC_chk_en ;
+output CRC_err ;
+//******************************************************************************
+//internal signals
+//******************************************************************************
+reg [31:0] CRC_reg;
+//******************************************************************************
+//input data width is 8bit, and the first bit is bit[0]
+function[31:0] NextCRC;
+ input[7:0] D;
+ input[31:0] C;
+ reg[31:0] NewCRC;
+ begin
+ NewCRC[0]=C[24]^C[30]^D[1]^D[7];
+ NewCRC[1]=C[25]^C[31]^D[0]^D[6]^C[24]^C[30]^D[1]^D[7];
+ NewCRC[2]=C[26]^D[5]^C[25]^C[31]^D[0]^D[6]^C[24]^C[30]^D[1]^D[7];
+ NewCRC[3]=C[27]^D[4]^C[26]^D[5]^C[25]^C[31]^D[0]^D[6];
+ NewCRC[4]=C[28]^D[3]^C[27]^D[4]^C[26]^D[5]^C[24]^C[30]^D[1]^D[7];
+ NewCRC[5]=C[29]^D[2]^C[28]^D[3]^C[27]^D[4]^C[25]^C[31]^D[0]^D[6]^C[24]^C[30]^D[1]^D[7];
+ NewCRC[6]=C[30]^D[1]^C[29]^D[2]^C[28]^D[3]^C[26]^D[5]^C[25]^C[31]^D[0]^D[6];
+ NewCRC[7]=C[31]^D[0]^C[29]^D[2]^C[27]^D[4]^C[26]^D[5]^C[24]^D[7];
+ NewCRC[8]=C[0]^C[28]^D[3]^C[27]^D[4]^C[25]^D[6]^C[24]^D[7];
+ NewCRC[9]=C[1]^C[29]^D[2]^C[28]^D[3]^C[26]^D[5]^C[25]^D[6];
+ NewCRC[10]=C[2]^C[29]^D[2]^C[27]^D[4]^C[26]^D[5]^C[24]^D[7];
+ NewCRC[11]=C[3]^C[28]^D[3]^C[27]^D[4]^C[25]^D[6]^C[24]^D[7];
+ NewCRC[12]=C[4]^C[29]^D[2]^C[28]^D[3]^C[26]^D[5]^C[25]^D[6]^C[24]^C[30]^D[1]^D[7];
+ NewCRC[13]=C[5]^C[30]^D[1]^C[29]^D[2]^C[27]^D[4]^C[26]^D[5]^C[25]^C[31]^D[0]^D[6];
+ NewCRC[14]=C[6]^C[31]^D[0]^C[30]^D[1]^C[28]^D[3]^C[27]^D[4]^C[26]^D[5];
+ NewCRC[15]=C[7]^C[31]^D[0]^C[29]^D[2]^C[28]^D[3]^C[27]^D[4];
+ NewCRC[16]=C[8]^C[29]^D[2]^C[28]^D[3]^C[24]^D[7];
+ NewCRC[17]=C[9]^C[30]^D[1]^C[29]^D[2]^C[25]^D[6];
+ NewCRC[18]=C[10]^C[31]^D[0]^C[30]^D[1]^C[26]^D[5];
+ NewCRC[19]=C[11]^C[31]^D[0]^C[27]^D[4];
+ NewCRC[20]=C[12]^C[28]^D[3];
+ NewCRC[21]=C[13]^C[29]^D[2];
+ NewCRC[22]=C[14]^C[24]^D[7];
+ NewCRC[23]=C[15]^C[25]^D[6]^C[24]^C[30]^D[1]^D[7];
+ NewCRC[24]=C[16]^C[26]^D[5]^C[25]^C[31]^D[0]^D[6];
+ NewCRC[25]=C[17]^C[27]^D[4]^C[26]^D[5];
+ NewCRC[26]=C[18]^C[28]^D[3]^C[27]^D[4]^C[24]^C[30]^D[1]^D[7];
+ NewCRC[27]=C[19]^C[29]^D[2]^C[28]^D[3]^C[25]^C[31]^D[0]^D[6];
+ NewCRC[28]=C[20]^C[30]^D[1]^C[29]^D[2]^C[26]^D[5];
+ NewCRC[29]=C[21]^C[31]^D[0]^C[30]^D[1]^C[27]^D[4];
+ NewCRC[30]=C[22]^C[31]^D[0]^C[28]^D[3];
+ NewCRC[31]=C[23]^C[29]^D[2];
+ NextCRC=NewCRC;
+ end
+ endfunction
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ CRC_reg <=32'hffffffff;
+ else if (CRC_init)
+ CRC_reg <=32'hffffffff;
+ else if (CRC_en)
+ CRC_reg <=NextCRC(CRC_data,CRC_reg);
+
+assign CRC_err = CRC_chk_en&(CRC_reg[31:0] != 32'hc704dd7b);
+
+endmodule
diff --git a/eth/rtl/verilog/MAC_rx/MAC_rx_FF.v b/eth/rtl/verilog/MAC_rx/MAC_rx_FF.v new file mode 100644 index 000000000..e212b8986 --- /dev/null +++ b/eth/rtl/verilog/MAC_rx/MAC_rx_FF.v @@ -0,0 +1,167 @@ +
+// ////////////////////////////////////////////////////////////////////
+// Completely Rewritten by M. Ettus, no John Gao code left
+// ////////////////////////////////////////////////////////////////////
+
+module MAC_rx_FF
+ #(parameter RX_FF_DEPTH = 9)
+ (input Reset,
+ input Clk_MAC,
+ input Clk_SYS,
+
+ // MAC_rx_ctrl interface
+ input [7:0] Fifo_data,
+ input Fifo_data_en,
+ output Fifo_full,
+ input Fifo_data_err,
+ input Fifo_data_end,
+ output [15:0] Fifo_space,
+
+ // CPU
+ input RX_APPEND_CRC,
+ input [4:0] Rx_Hwmark,
+ input [4:0] Rx_Lwmark,
+
+ // User interface
+ output Rx_mac_empty,
+ input Rx_mac_rd,
+ output [31:0] Rx_mac_data,
+ output [1:0] Rx_mac_BE,
+ output Rx_mac_sop,
+ output Rx_mac_eop,
+ output Rx_mac_err,
+
+ // FIFO Levels
+ output [15:0] fifo_occupied,
+ output fifo_full_dbg,
+ output fifo_empty
+ );
+
+ reg [1:0] FF_state;
+ reg [2:0] PKT_state;
+ reg [31:0] staging;
+ reg [35:0] staging2;
+ reg line_ready, line_ready_d1;
+ wire sop_i, eop_i;
+ reg [1:0] be;
+
+ always @(posedge Clk_MAC or posedge Reset)
+ if(Reset)
+ FF_state <= 0;
+ else
+ if(Fifo_data_err | Fifo_data_end)
+ FF_state <= 0;
+ else if(Fifo_data_en)
+ FF_state <= FF_state + 1;
+
+ always @(posedge Clk_MAC or posedge Reset)
+ if(Reset)
+ staging[31:0] <= 0;
+ else if(Fifo_data_en)
+ case(FF_state)
+ 0 : staging[31:24] <= Fifo_data;
+ 1 : staging[23:16] <= Fifo_data;
+ 2 : staging[15:8] <= Fifo_data;
+ 3 : staging[7:0] <= Fifo_data;
+ endcase // case(FF_state)
+
+ localparam PKT_idle = 0;
+ localparam PKT_sop = 1;
+ localparam PKT_pkt = 2;
+ localparam PKT_end = 3;
+ localparam PKT_err = 4;
+
+ always @(posedge Clk_MAC or posedge Reset)
+ if(Reset)
+ PKT_state <= 0;
+ else
+ case(PKT_state)
+ PKT_idle :
+ if(Fifo_data_en)
+ PKT_state <= PKT_sop;
+ PKT_sop, PKT_pkt :
+ if(Fifo_data_err | (line_ready & Fifo_full))
+ PKT_state <= PKT_err;
+ else if(Fifo_data_end)
+ PKT_state <= PKT_end;
+ else if(line_ready & ~Fifo_full)
+ PKT_state <= PKT_pkt;
+ PKT_end :
+ PKT_state <= PKT_idle;
+ PKT_err :
+ if(~Fifo_full)
+ PKT_state <= PKT_idle;
+ endcase // case(PKT_state)
+
+ assign sop_i = (PKT_state == PKT_sop);
+ assign eop_i = (PKT_state == PKT_end);
+
+ always @(posedge Clk_MAC)
+ if(line_ready)
+ staging2 <= {sop_i, eop_i, be[1:0], staging};
+
+ always @(posedge Clk_MAC)
+ if(Reset)
+ line_ready <= 0;
+ else if((Fifo_data_en & (FF_state==2'd3)) | Fifo_data_end | Fifo_data_err)
+ line_ready <= 1;
+ else
+ line_ready <= 0;
+
+ always @(posedge Clk_MAC)
+ line_ready_d1 <= line_ready;
+
+ always @(posedge Clk_MAC)
+ if(Fifo_data_end | Fifo_data_err)
+ be <= FF_state;
+ else
+ be <= 0;
+
+ wire sop_o, eop_o, empty;
+ wire [1:0] be_o;
+ wire [RX_FF_DEPTH-1:0] occupied, occupied_sysclk;
+ wire [31:0] dataout;
+
+/*
+ fifo_2clock #(.DWIDTH(36),.AWIDTH(RX_FF_DEPTH)) mac_rx_fifo
+ (.wclk(Clk_MAC),.datain((PKT_state==PKT_err) ? 36'hF_FFFF_FFFF : staging2),.write(~Fifo_full & (line_ready_d1|(PKT_state==PKT_err))),
+ .full(Fifo_full),.level_wclk(occupied),
+ .rclk(Clk_SYS),.dataout({sop_o,eop_o,be_o[1:0],dataout}),.read(Rx_mac_rd),
+ .empty(empty),.level_rclk(),
+ .arst(Reset) );
+ */
+
+ fifo_xlnx_2Kx36_2clk mac_rx_ff_core
+ (
+ .din((PKT_state==PKT_err) ? 36'hF_FFFF_FFFF : staging2), // Bus [35 : 0]
+ .rd_clk(Clk_SYS),
+ .rd_en(Rx_mac_rd),
+ .rst(Reset),
+ .wr_clk(Clk_MAC),
+ .wr_en(~Fifo_full & (line_ready_d1|(PKT_state==PKT_err))),
+ .dout({sop_o,eop_o,be_o[1:0],dataout}), // Bus [35 : 0]
+ .empty(empty),
+ .full(Fifo_full),
+ .rd_data_count(occupied_sysclk), // Bus [11 : 0]
+ .wr_data_count(occupied)); // Bus [11 : 0]
+
+ assign Fifo_space[15:RX_FF_DEPTH] = 0;
+ assign Fifo_space[RX_FF_DEPTH-1:0] = ~occupied;
+ assign fifo_occupied = occupied_sysclk;
+ assign fifo_full_dbg = Fifo_full; // FIXME -- in wrong clock domain
+ assign fifo_empty = empty;
+
+ // mac side fifo interface
+ // Input - Rx_mac_rd
+ // Output - Rx_mac_empty, Rx_mac_sop, Rx_mac_eop, Rx_mac_err, Rx_mac_data, Rx_mac_BE
+
+ assign Rx_mac_BE = be_o;
+ assign Rx_mac_sop = sop_o & ~eop_o;
+ assign Rx_mac_eop = eop_o;
+ assign Rx_mac_err = sop_o & eop_o;
+ assign Rx_mac_empty = empty;
+ assign Rx_mac_data = dataout;
+
+endmodule // MAC_rx_FF
+
+// FIXME Should we send out an "almost full" signal instead of full?
diff --git a/eth/rtl/verilog/MAC_rx/MAC_rx_add_chk.v b/eth/rtl/verilog/MAC_rx/MAC_rx_add_chk.v new file mode 100644 index 000000000..0c8d6bd4e --- /dev/null +++ b/eth/rtl/verilog/MAC_rx/MAC_rx_add_chk.v @@ -0,0 +1,158 @@ +// ////////////////////////////////////////////////////////////////////
+// // ////
+// // MAC_rx_add_chk.v ////
+// // ////
+// // This file is part of the Ethernet IP core project ////
+// // http://www.opencores.org/projects.cgi/wr_en/ethernet_tri_mode/////
+// // ////
+// // Author(s): ////
+// // - Jon Gao (gaojon@yahoo.com) ////
+// // ////
+// // ////
+// ////////////////////////////////////////////////////////////////////
+// // ////
+// // Copyright (C) 2001 Authors ////
+// // ////
+// // This source file may be used and distributed without ////
+// // restriction provided that this copyright statement is not ////
+// // removed from the file and that any derivative work contains ////
+// // the original copyright notice and the associated disclaimer. ////
+// // ////
+// // This source file is free software; you can redistribute it ////
+// // and/or modify it under the terms of the GNU Lesser General ////
+// // Public License as published by the Free Software Foundation; ////
+// // either version 2.1 of the License, or (at your option) any ////
+// // later version. ////
+// // ////
+// // This source is distributed in the hope that it will be ////
+// // useful, but WITHOUT ANY WARRANTY; without even the implied ////
+// // warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+// // PURPOSE. See the GNU Lesser General Public License for more ////
+// // details. ////
+// // ////
+// // You should have received a copy of the GNU Lesser General ////
+// // Public License along with this source; if not, download it ////
+// // from http://www.opencores.org/lgpl.shtml ////
+// // ////
+// ////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: MAC_rx_add_chk.v,v $
+// Revision 1.3 2006/01/19 14:07:54 maverickist
+// verification is complete.
+//
+// Revision 1.2 2005/12/16 06:44:17 Administrator
+// replaced tab with space.
+// passed 9.6k length frame test.
+//
+// Revision 1.1.1.1 2005/12/13 01:51:45 Administrator
+// no message
+//
+
+module MAC_rx_add_chk
+ (Reset ,
+ Clk ,
+ Init ,
+ data ,
+ MAC_add_en ,
+ MAC_rx_add_chk_err ,
+ //From CPU
+ MAC_rx_add_chk_en ,
+ MAC_add_prom_data ,
+ MAC_add_prom_add ,
+ MAC_add_prom_wr
+ );
+
+ input Reset ;
+ input Clk ;
+ input Init ;
+ input [7:0] data ;
+ input MAC_add_en ;
+ output MAC_rx_add_chk_err ;
+ //From CPU
+ input MAC_rx_add_chk_en ;
+ input [7:0] MAC_add_prom_data ;
+ input [2:0] MAC_add_prom_add ;
+ input MAC_add_prom_wr ;
+
+ // ******************************************************************************
+ // internal signals
+ // ******************************************************************************
+ reg [2:0] addr_rd;
+ wire [2:0] addr_wr;
+ wire [7:0] din;
+ //wire [7:0] dout;
+ reg [7:0] dout;
+ wire wr_en;
+
+ reg MAC_rx_add_chk_err;
+ reg MAC_add_prom_wr_dl1;
+ reg MAC_add_prom_wr_dl2;
+ reg [7:0] data_dl1 ;
+ reg MAC_add_en_dl1 ;
+
+ // ******************************************************************************
+ // write data from cpu to prom
+ // ******************************************************************************
+ always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ begin
+ data_dl1 <=0;
+ MAC_add_en_dl1 <=0;
+ end
+ else
+ begin
+ data_dl1 <=data;
+ MAC_add_en_dl1 <=MAC_add_en;
+ end
+
+ always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ begin
+ MAC_add_prom_wr_dl1 <=0;
+ MAC_add_prom_wr_dl2 <=0;
+ end
+ else
+ begin
+ MAC_add_prom_wr_dl1 <=MAC_add_prom_wr;
+ MAC_add_prom_wr_dl2 <=MAC_add_prom_wr_dl1;
+ end
+
+ assign wr_en =MAC_add_prom_wr_dl1&!MAC_add_prom_wr_dl2;
+ assign addr_wr =MAC_add_prom_add;
+ assign din =MAC_add_prom_data;
+
+ // ******************************************************************************
+ // mac add verify
+ // ******************************************************************************
+ always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ addr_rd <=0;
+ else if (Init)
+ addr_rd <=0;
+ else if (MAC_add_en)
+ addr_rd <=addr_rd + 1;
+
+ always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ MAC_rx_add_chk_err <=0;
+ else if (Init)
+ MAC_rx_add_chk_err <=0;
+ else if (MAC_rx_add_chk_en && MAC_add_en_dl1 && (dout!=data_dl1) )
+ MAC_rx_add_chk_err <=1;
+
+
+ // ******************************************************************************
+ // a port for read ,b port for write .
+ // ******************************************************************************
+
+ reg [7:0] address_ram [0:7];
+ always @(posedge Clk)
+ if(wr_en)
+ address_ram[addr_wr] <= din;
+
+ always @(posedge Clk)
+ dout <= address_ram[addr_rd];
+
+endmodule // MAC_rx_add_chk
diff --git a/eth/rtl/verilog/MAC_rx/MAC_rx_ctrl.v b/eth/rtl/verilog/MAC_rx/MAC_rx_ctrl.v new file mode 100644 index 000000000..5ab795801 --- /dev/null +++ b/eth/rtl/verilog/MAC_rx/MAC_rx_ctrl.v @@ -0,0 +1,664 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// MAC_rx_ctrl.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: MAC_rx_ctrl.v,v $
+// Revision 1.4 2006/06/25 04:58:56 maverickist
+// no message
+//
+// Revision 1.3 2006/01/19 14:07:54 maverickist
+// verification is complete.
+//
+// Revision 1.3 2005/12/16 06:44:17 Administrator
+// replaced tab with space.
+// passed 9.6k length frame test.
+//
+// Revision 1.2 2005/12/13 12:15:37 Administrator
+// no message
+//
+// Revision 1.1.1.1 2005/12/13 01:51:45 Administrator
+// no message
+//
+
+module MAC_rx_ctrl (
+Reset ,
+Clk ,
+//RMII interface
+MCrs_dv , //
+MRxD , //
+MRxErr , //
+//CRC_chk interface
+CRC_en ,
+CRC_data,
+CRC_init ,
+CRC_err ,
+//MAC_rx_add_chk interface
+MAC_add_en ,
+MAC_add_data,
+MAC_rx_add_chk_err ,
+//broadcast_filter
+broadcast_ptr ,
+broadcast_drop ,
+//flow_control signals
+pause_quanta ,
+pause_quanta_val ,
+//MAC_rx_FF interface
+Fifo_data ,
+Fifo_data_en ,
+Fifo_data_err ,
+Fifo_data_drop ,
+Fifo_data_end ,
+Fifo_full ,
+//RMON interface
+Rx_pkt_type_rmon ,
+Rx_pkt_length_rmon ,
+Rx_apply_rmon ,
+Rx_pkt_err_type_rmon ,
+//CPU
+RX_IFG_SET ,
+RX_MAX_LENGTH,
+RX_MIN_LENGTH
+);
+
+input Reset ;
+input Clk ;
+ //RMII interface
+input MCrs_dv ;
+input [7:0] MRxD ;
+input MRxErr ;
+ //CRC_chk interface
+output CRC_en ;
+output CRC_init;
+output [7:0] CRC_data;
+input CRC_err ;
+ //MAC_rx_add_chk interface
+output MAC_add_en ;
+output [7:0] MAC_add_data;
+input MAC_rx_add_chk_err ;
+ //broadcast_filter
+output broadcast_ptr ;
+input broadcast_drop ;
+ //flow_control signals
+output [15:0] pause_quanta ;
+output pause_quanta_val ;
+ //MAC_rx_FF interface
+output [7:0] Fifo_data ;
+output Fifo_data_en ;
+output Fifo_data_err ;
+output Fifo_data_drop ;
+output Fifo_data_end ;
+input Fifo_full;
+ //RMON interface
+output [15:0] Rx_pkt_length_rmon ;
+output Rx_apply_rmon ;
+output [2:0] Rx_pkt_err_type_rmon ;
+output [2:0] Rx_pkt_type_rmon ;
+ //CPU
+input [5:0] RX_IFG_SET ;
+input [15:0] RX_MAX_LENGTH ;// 1518
+input [6:0] RX_MIN_LENGTH ;// 64
+
+//******************************************************************************
+//internal signals
+//******************************************************************************
+parameter State_idle =4'd00;
+parameter State_preamble =4'd01;
+parameter State_SFD =4'd02;
+parameter State_data =4'd03;
+parameter State_checkCRC =4'd04;
+parameter State_OkEnd =4'd07;
+parameter State_DropEnd =4'd08;
+parameter State_ErrEnd =4'd09;
+parameter State_CRCErrEnd =4'd10;
+parameter State_FFFullDrop =4'd11;
+parameter State_FFFullErrEnd =4'd12;
+parameter State_IFG =4'd13;
+parameter State_Drop2End =4'd14;
+
+parameter Pause_idle =4'd0;
+parameter Pause_pre_syn =4'd1;
+parameter Pause_quanta_hi =4'd2;
+parameter Pause_quanta_lo =4'd3;
+parameter Pause_syn =4'd4;
+
+reg [3:0] Current_state /* synthesis syn_keep=1 */;
+reg [3:0] Next_state;
+reg [3:0] Pause_current /* synthesis syn_keep=1 */;
+reg [3:0] Pause_next;
+reg [5:0] IFG_counter;
+reg Crs_dv ;
+reg [7:0] RxD ;
+reg [7:0] RxD_dl1 ;
+reg RxErr ;
+reg [15:0] Frame_length_counter;
+reg Too_long;
+reg Too_short;
+reg ProcessingHeader;
+//reg Fifo_data_en;
+//reg Fifo_data_err;
+//reg Fifo_data_drop;
+//reg Fifo_data_end;
+reg CRC_en;
+reg CRC_init;
+reg Rx_apply_rmon;
+reg [2:0] Rx_pkt_err_type_rmon;
+reg MAC_add_en;
+reg [2:0] Rx_pkt_type_rmon;
+reg [7:0] pause_quanta_h ;
+reg [15:0] pause_quanta ;
+reg pause_quanta_val ;
+reg pause_quanta_val_tmp;
+reg pause_frame_ptr ;
+reg broadcast_ptr ;
+//******************************************************************************
+//delay signals
+//******************************************************************************
+
+always @ (posedge Reset or posedge Clk)
+ if (Reset)
+ begin
+ Crs_dv <=0;
+ RxD <=0;
+ RxErr <=0;
+ end
+ else
+ begin
+ Crs_dv <=MCrs_dv ;
+ RxD <=MRxD ;
+ RxErr <=MRxErr ;
+ end
+
+always @ (posedge Reset or posedge Clk)
+ if (Reset)
+ RxD_dl1 <=0;
+ else
+ RxD_dl1 <=RxD;
+
+//---------------------------------------------------------------------------
+// Small pre-FIFO (acutally a synchronously clearable shift-register) for
+// storing the first part of a packet before writing it to the "real" FIFO
+// in MAC_rx_FF. This allows a packet to be dropped safely if an error
+// happens in the beginning of a packet (or if the MAC address doesn't pass
+// the receive filter!)
+//---------------------------------------------------------------------------
+
+ reg pre_fifo_data_drop;
+ reg pre_fifo_data_en;
+ reg pre_fifo_data_err;
+ reg pre_fifo_data_end;
+ wire [7:0] pre_fifo_wrdata;
+
+ reg [8+3-1:0] pre_fifo_element_0;
+ reg [8+3-1:0] pre_fifo_element_1;
+ reg [8+3-1:0] pre_fifo_element_2;
+ reg [8+3-1:0] pre_fifo_element_3;
+ reg [8+3-1:0] pre_fifo_element_4;
+ reg [8+3-1:0] pre_fifo_element_5;
+ reg [8+3-1:0] pre_fifo_element_6;
+ reg [8+3-1:0] pre_fifo_element_7;
+ reg [8+3-1:0] pre_fifo_element_8;
+ reg [8+3-1:0] pre_fifo_element_9;
+
+ always @( posedge Reset or posedge Clk )
+ if ( Reset )
+ begin
+ pre_fifo_element_0 <= 'b0;
+ pre_fifo_element_1 <= 'b0;
+ pre_fifo_element_2 <= 'b0;
+ pre_fifo_element_3 <= 'b0;
+ pre_fifo_element_4 <= 'b0;
+ pre_fifo_element_5 <= 'b0;
+ pre_fifo_element_6 <= 'b0;
+ pre_fifo_element_7 <= 'b0;
+ pre_fifo_element_8 <= 'b0;
+ pre_fifo_element_9 <= 'b0;
+ end
+ else
+ begin
+ if ( pre_fifo_data_drop )
+ begin
+ pre_fifo_element_0 <= 'b0;
+ pre_fifo_element_1 <= 'b0;
+ pre_fifo_element_2 <= 'b0;
+ pre_fifo_element_3 <= 'b0;
+ pre_fifo_element_4 <= 'b0;
+ pre_fifo_element_5 <= 'b0;
+ pre_fifo_element_6 <= 'b0;
+ pre_fifo_element_7 <= 'b0;
+ pre_fifo_element_8 <= 'b0;
+ pre_fifo_element_9 <= 'b0;
+ end
+ else
+ begin
+ pre_fifo_element_0 <= pre_fifo_element_1;
+ pre_fifo_element_1 <= pre_fifo_element_2;
+ pre_fifo_element_2 <= pre_fifo_element_3;
+ pre_fifo_element_3 <= pre_fifo_element_4;
+ pre_fifo_element_4 <= pre_fifo_element_5;
+ pre_fifo_element_5 <= pre_fifo_element_6;
+ pre_fifo_element_6 <= pre_fifo_element_7;
+ pre_fifo_element_7 <= pre_fifo_element_8;
+ pre_fifo_element_8 <= pre_fifo_element_9;
+ pre_fifo_element_9 <= { pre_fifo_data_en,
+ pre_fifo_data_err,
+ pre_fifo_data_end,
+ pre_fifo_wrdata };
+ end
+ end
+
+ assign Fifo_data = pre_fifo_element_0[7:0];
+ assign Fifo_data_end = pre_fifo_element_0[8];
+ assign Fifo_data_err = pre_fifo_element_0[9];
+ assign Fifo_data_en = pre_fifo_element_0[10];
+
+ assign CRC_data = pre_fifo_wrdata;
+ assign MAC_add_data = pre_fifo_wrdata;
+
+//******************************************************************************
+//State_machine
+//******************************************************************************
+
+always @( posedge Reset or posedge Clk )
+ if ( Reset )
+ Current_state <= State_idle;
+ else
+ Current_state <= Next_state;
+
+always @ (*)
+ case (Current_state)
+ State_idle:
+ if ( Crs_dv&&RxD==8'h55 )
+ Next_state = State_preamble;
+ else
+ Next_state = Current_state;
+
+ State_preamble:
+ if ( !Crs_dv )
+ Next_state = State_DropEnd;
+ else if ( RxErr )
+ Next_state = State_DropEnd;
+ else if ( RxD==8'hd5 )
+ Next_state = State_SFD;
+ else if ( RxD==8'h55 )
+ Next_state =Current_state;
+ else
+ Next_state = State_DropEnd;
+
+ State_SFD:
+ if ( !Crs_dv )
+ Next_state = State_DropEnd;
+ else if ( RxErr )
+ Next_state = State_DropEnd;
+ else
+ Next_state = State_data;
+
+ State_data:
+ if ( !Crs_dv && !ProcessingHeader && !Too_short && !Too_long )
+ Next_state = State_checkCRC;
+ else if ( !Crs_dv && ProcessingHeader )
+ Next_state = State_Drop2End;
+ else if ( !Crs_dv && (Too_short | Too_long) )
+ Next_state = State_ErrEnd;
+ else if ( Fifo_full )
+ Next_state = State_FFFullErrEnd;
+ else if ( RxErr && ProcessingHeader )
+ Next_state = State_Drop2End;
+ else if ( RxErr || Too_long )
+ Next_state = State_ErrEnd;
+ else if ( MAC_rx_add_chk_err || broadcast_drop )
+ Next_state = State_DropEnd;
+ else
+ Next_state = State_data;
+
+ State_checkCRC:
+ if ( CRC_err )
+ Next_state = State_CRCErrEnd;
+ else
+ Next_state = State_OkEnd;
+
+ State_OkEnd:
+ Next_state = State_IFG;
+
+ State_ErrEnd:
+ Next_state = State_IFG;
+
+ State_DropEnd:
+ Next_state = State_IFG;
+
+ State_Drop2End:
+ Next_state = State_IFG;
+
+ State_CRCErrEnd:
+ Next_state = State_IFG;
+
+ State_FFFullErrEnd:
+ Next_state = State_FFFullDrop;
+
+ State_FFFullDrop:
+ if ( !Crs_dv )
+ Next_state =State_IFG;
+ else
+ Next_state =Current_state;
+
+ State_IFG:
+ if ( IFG_counter==RX_IFG_SET-4 ) // Remove some additional time?
+ Next_state = State_idle;
+ else
+ Next_state = Current_state;
+
+ default:
+ Next_state = State_idle;
+ endcase
+
+always @( posedge Reset or posedge Clk )
+ if ( Reset )
+ IFG_counter <= 0;
+ else if ( Current_state!=State_IFG )
+ IFG_counter <= 0;
+ else
+ IFG_counter <= IFG_counter + 1;
+
+//******************************************************************************
+//gen fifo interface signals
+//******************************************************************************
+
+assign pre_fifo_wrdata = RxD_dl1;
+
+always @( Current_state )
+ if ( Current_state==State_data )
+ pre_fifo_data_en = 1;
+ else
+ pre_fifo_data_en = 0;
+
+always @( Current_state )
+ if ( (Current_state==State_ErrEnd ) ||
+ (Current_state==State_OkEnd ) ||
+ (Current_state==State_CRCErrEnd ) ||
+ (Current_state==State_FFFullErrEnd) ||
+ (Current_state==State_DropEnd ) ||
+ (Current_state==State_Drop2End ) )
+ pre_fifo_data_end = 1;
+ else
+ pre_fifo_data_end = 0;
+
+always @( Current_state )
+ if ( (Current_state==State_ErrEnd ) ||
+ (Current_state==State_CRCErrEnd ) ||
+ (Current_state==State_FFFullErrEnd) ||
+ (Current_state==State_DropEnd ) ||
+ (Current_state==State_Drop2End ) )
+ pre_fifo_data_err = 1;
+ else
+ pre_fifo_data_err = 0;
+
+always @( Current_state )
+ if ( (Current_state==State_DropEnd ) ||
+ (Current_state==State_Drop2End) )
+ pre_fifo_data_drop = 1;
+ else
+ pre_fifo_data_drop = 0;
+
+ // Drop in main Rx FIFO is no longer supported!
+ assign Fifo_data_drop = 0;
+
+//******************************************************************************
+//CRC_chk interface
+//******************************************************************************
+
+always @(Current_state)
+ if (Current_state==State_data)
+ CRC_en =1;
+ else
+ CRC_en =0;
+
+always @(Current_state)
+ if (Current_state==State_SFD)
+ CRC_init =1;
+ else
+ CRC_init =0;
+
+//******************************************************************************
+//gen rmon signals
+//******************************************************************************
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ Frame_length_counter <=0;
+ else if (Current_state==State_SFD)
+ Frame_length_counter <=1;
+ else if (Current_state==State_data)
+ Frame_length_counter <=Frame_length_counter+ 1'b1;
+
+always @( Frame_length_counter )
+ if ( Frame_length_counter < 8 )
+ ProcessingHeader = 1;
+ else
+ ProcessingHeader = 0;
+
+always @ (Frame_length_counter or RX_MIN_LENGTH)
+ if (Frame_length_counter<RX_MIN_LENGTH)
+ Too_short =1;
+ else
+ Too_short =0;
+
+always @ (*)
+ if (Frame_length_counter>RX_MAX_LENGTH)
+ Too_long =1;
+ else
+ Too_long =0;
+
+assign Rx_pkt_length_rmon = Frame_length_counter-1'b1;
+
+reg [2:0] Rx_apply_rmon_reg;
+
+always @( posedge Clk or posedge Reset )
+ if ( Reset )
+ begin
+ Rx_apply_rmon <= 0;
+ Rx_apply_rmon_reg <= 'b0;
+ end
+ else
+ begin
+ if ( (Current_state==State_OkEnd ) ||
+ (Current_state==State_ErrEnd ) ||
+ (Current_state==State_CRCErrEnd ) ||
+ (Current_state==State_Drop2End ) ||
+ (Current_state==State_FFFullErrEnd) )
+ Rx_apply_rmon <= 1;
+ else
+ if ( Rx_apply_rmon_reg[2] )
+ Rx_apply_rmon <= 0;
+
+ Rx_apply_rmon_reg <= { Rx_apply_rmon_reg[1:0], Rx_apply_rmon };
+ end
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ Rx_pkt_err_type_rmon <=0;
+ else if (Current_state==State_CRCErrEnd)
+ Rx_pkt_err_type_rmon <=3'b001 ;//
+ else if (Current_state==State_FFFullErrEnd)
+ Rx_pkt_err_type_rmon <=3'b010 ;//
+ else if ( (Current_state==State_ErrEnd) || (Current_state==State_Drop2End) )
+ Rx_pkt_err_type_rmon <=3'b011 ;//
+ else if(Current_state==State_OkEnd)
+ Rx_pkt_err_type_rmon <=3'b100 ;
+
+
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ Rx_pkt_type_rmon <=0;
+ else if (Current_state==State_OkEnd&&pause_frame_ptr)
+ Rx_pkt_type_rmon <=3'b100 ;//
+ else if(Current_state==State_SFD&&Next_state==State_data)
+ Rx_pkt_type_rmon <={1'b0,MRxD[7:6]};
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ broadcast_ptr <=0;
+ else if(Current_state==State_IFG)
+ broadcast_ptr <=0;
+ else if(Current_state==State_SFD&&Next_state==State_data&&MRxD[7:6]==2'b11)
+ broadcast_ptr <=1;
+
+
+
+//******************************************************************************
+//MAC add checker signals
+//******************************************************************************
+always @ (Frame_length_counter or pre_fifo_data_en)
+ if(Frame_length_counter>=1&&Frame_length_counter<=6)
+ MAC_add_en <=pre_fifo_data_en;
+ else
+ MAC_add_en <=0;
+
+//******************************************************************************
+//flow control signals
+//******************************************************************************
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ Pause_current <=Pause_idle;
+ else
+ Pause_current <=Pause_next;
+
+always @ (*)
+ case (Pause_current)
+ Pause_idle :
+ if(Current_state==State_SFD)
+ Pause_next =Pause_pre_syn;
+ else
+ Pause_next =Pause_current;
+ Pause_pre_syn:
+ case (Frame_length_counter)
+ 16'd1: if (RxD_dl1==8'h01)
+ Pause_next =Pause_current;
+ else
+ Pause_next =Pause_idle;
+ 16'd2: if (RxD_dl1==8'h80)
+ Pause_next =Pause_current;
+ else
+ Pause_next =Pause_idle;
+ 16'd3: if (RxD_dl1==8'hc2)
+ Pause_next =Pause_current;
+ else
+ Pause_next =Pause_idle;
+ 16'd4: if (RxD_dl1==8'h00)
+ Pause_next =Pause_current;
+ else
+ Pause_next =Pause_idle;
+ 16'd5: if (RxD_dl1==8'h00)
+ Pause_next =Pause_current;
+ else
+ Pause_next =Pause_idle;
+ 16'd6: if (RxD_dl1==8'h01)
+ Pause_next =Pause_current;
+ else
+ Pause_next =Pause_idle;
+ 16'd13: if (RxD_dl1==8'h88)
+ Pause_next =Pause_current;
+ else
+ Pause_next =Pause_idle;
+ 16'd14: if (RxD_dl1==8'h08)
+ Pause_next =Pause_current;
+ else
+ Pause_next =Pause_idle;
+ 16'd15: if (RxD_dl1==8'h00)
+ Pause_next =Pause_current;
+ else
+ Pause_next =Pause_idle;
+ 16'd16: if (RxD_dl1==8'h01)
+ Pause_next =Pause_quanta_hi;
+ else
+ Pause_next =Pause_idle;
+ default: Pause_next =Pause_current;
+ endcase
+ Pause_quanta_hi :
+ Pause_next =Pause_quanta_lo;
+ Pause_quanta_lo :
+ Pause_next =Pause_syn;
+ Pause_syn :
+ if (Current_state==State_IFG)
+ Pause_next =Pause_idle;
+ else
+ Pause_next =Pause_current;
+ default
+ Pause_next =Pause_idle;
+ endcase
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ pause_quanta_h <=0;
+ else if(Pause_current==Pause_quanta_hi)
+ pause_quanta_h <=RxD_dl1;
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ pause_quanta <=0;
+ else if(Pause_current==Pause_quanta_lo)
+ pause_quanta <={pause_quanta_h,RxD_dl1};
+
+ // The following 2 always blocks are a strange way of holding
+ // pause_quanta_val high for 2 cycles
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ pause_quanta_val_tmp <=0;
+ else if(Current_state==State_OkEnd&&Pause_current==Pause_syn)
+ pause_quanta_val_tmp <=1;
+ else
+ pause_quanta_val_tmp <=0;
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ pause_quanta_val <=0;
+ else if(Current_state==State_OkEnd&&Pause_current==Pause_syn||pause_quanta_val_tmp)
+ pause_quanta_val <=1;
+ else
+ pause_quanta_val <=0;
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ pause_frame_ptr <=0;
+ else if(Pause_current==Pause_syn)
+ pause_frame_ptr <=1;
+ else
+ pause_frame_ptr <=0;
+
+endmodule
+
+
diff --git a/eth/rtl/verilog/MAC_top.v b/eth/rtl/verilog/MAC_top.v new file mode 100644 index 000000000..d93b287ce --- /dev/null +++ b/eth/rtl/verilog/MAC_top.v @@ -0,0 +1,516 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// MAC_top.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+
+module MAC_top
+ #(parameter TX_FF_DEPTH = 9,
+ parameter RX_FF_DEPTH = 9)
+ (
+ // System signals
+ input Clk_125M,
+ input Clk_user,
+
+ input rst_mac,
+ input rst_user,
+
+ // Wishbone compliant core host interface
+ input RST_I, // Active high (async) reset of the Wishbone interface
+ input CLK_I, // Wishbone interface clock (nominally 50 MHz)
+ input STB_I, // Active high module-select
+ input CYC_I, // Active high cycle-enable
+ input [6:0] ADR_I, // Module register address
+ input WE_I, // Active high for writes, low for reads
+ input [31:0] DAT_I, // Write data
+ output [31:0] DAT_O, // Read data
+ output ACK_O, // Acknowledge output – single high pulse
+
+ // User (packet) interface
+ output Rx_mac_empty,
+ input Rx_mac_rd,
+ output [31:0] Rx_mac_data,
+ output [1:0] Rx_mac_BE,
+ output Rx_mac_sop,
+ output Rx_mac_eop,
+ output Rx_mac_err,
+
+ output Tx_mac_wa,
+ input Tx_mac_wr,
+ input [31:0] Tx_mac_data,
+ input [1:0] Tx_mac_BE,
+ input Tx_mac_sop,
+ input Tx_mac_eop,
+
+ // PHY interface (GMII/MII)
+ output Gtx_clk, // Used only in GMII mode
+ input Rx_clk,
+ input Tx_clk, // Used only in MII mode
+ output Tx_er,
+ output Tx_en,
+ output [7:0] Txd,
+ input Rx_er,
+ input Rx_dv,
+ input [7:0] Rxd,
+ input Crs,
+ input Col,
+
+ // MDIO interface (to PHY)
+ inout Mdio,
+ output Mdc,
+
+ // FIFO levels
+ output [15:0] rx_fifo_occupied,
+ output rx_fifo_full,
+ output rx_fifo_empty,
+ output [15:0] tx_fifo_occupied,
+ output tx_fifo_full,
+ output tx_fifo_empty,
+
+ // Debug Interface
+ output [31:0] debug0,
+ output [31:0] debug1
+);
+
+ wire rst_mac_rx = rst_mac;
+ wire rst_mac_tx = rst_mac;
+ wire [2:0] Speed;
+
+ wire [31:0] debug_rx;
+ wire [31:0] debug_tx0;
+ wire [31:0] debug_tx1;
+
+ //-------------------------------------------------------------------------
+ // Local declarations
+ //-------------------------------------------------------------------------
+
+ // RMON interface
+ wire [15:0] Rx_pkt_length_rmon;
+ wire Rx_apply_rmon;
+ wire [2:0] Rx_pkt_err_type_rmon;
+ wire [2:0] Rx_pkt_type_rmon;
+ wire [2:0] Tx_pkt_type_rmon;
+ wire [15:0] Tx_pkt_length_rmon;
+ wire Tx_apply_rmon;
+ wire [2:0] Tx_pkt_err_type_rmon;
+
+ // PHY interface
+ wire MCrs_dv;
+ wire [7:0] MRxD;
+ wire MRxErr;
+
+ // Flow-control signals
+ wire [15:0] pause_quanta;
+ wire pause_quanta_val;
+ wire [15:0] rx_fifo_space;
+ wire pause_apply, pause_quanta_sub;
+ wire xon_gen, xoff_gen, xon_gen_complete, xoff_gen_complete;
+ wire [15:0] fc_hwmark, fc_lwmark;
+
+ //PHY interface
+ wire [7:0] MTxD;
+ wire MTxEn;
+ wire MCRS;
+
+ // Interface clk signals
+ wire MAC_tx_clk;
+ wire MAC_rx_clk;
+ wire MAC_tx_clk_div;
+ wire MAC_rx_clk_div;
+
+ // Reg signals
+ wire [4:0] Tx_Hwmark;
+ wire [4:0] Tx_Lwmark;
+ wire pause_frame_send_en;
+ wire [15:0] pause_quanta_set;
+ wire MAC_tx_add_en;
+ wire FullDuplex;
+ wire [3:0] MaxRetry;
+ wire [5:0] IFGset;
+ wire [7:0] MAC_tx_add_prom_data;
+ wire [2:0] MAC_tx_add_prom_add;
+ wire MAC_tx_add_prom_wr;
+ wire tx_pause_en;
+
+ // Rx host interface
+ wire MAC_rx_add_chk_en;
+ wire [7:0] MAC_rx_add_prom_data;
+ wire [2:0] MAC_rx_add_prom_add;
+ wire MAC_rx_add_prom_wr;
+ wire broadcast_filter_en;
+ wire RX_APPEND_CRC;
+ wire [4:0] Rx_Hwmark;
+ wire [4:0] Rx_Lwmark;
+ wire CRC_chk_en;
+ wire [5:0] RX_IFG_SET;
+ wire [15:0] RX_MAX_LENGTH;
+ wire [6:0] RX_MIN_LENGTH;
+
+ // RMON host interface
+ wire [5:0] CPU_rd_addr;
+ wire CPU_rd_apply;
+ wire CPU_rd_grant;
+ wire [31:0] CPU_rd_dout;
+
+ // PHY int host interface
+ wire Line_loop_en;
+
+ // MII to CPU
+ wire [7:0] Divider;
+ wire [15:0] CtrlData;
+ wire [4:0] Rgad;
+ wire [4:0] Fiad;
+ wire NoPre;
+ wire WCtrlData;
+ wire RStat;
+ wire ScanStat;
+ wire Busy;
+ wire LinkFail;
+ wire Nvalid;
+ wire [15:0] Prsd;
+ wire WCtrlDataStart;
+ wire RStatStart;
+ wire UpdateMIIRX_DATAReg;
+ wire [15:0] broadcast_bucket_depth;
+ wire [15:0] broadcast_bucket_interval;
+
+ //-------------------------------------------------------------------------
+ // Instantiation of sub-modules
+ //-------------------------------------------------------------------------
+
+ MAC_rx #(.RX_FF_DEPTH(RX_FF_DEPTH))
+ U_MAC_rx(
+ .Reset ( rst_mac_rx ),
+ .Clk_user ( Clk_user ),
+ .Clk ( MAC_rx_clk_div ),
+
+ // RMII interface
+ .MCrs_dv ( MCrs_dv ),
+ .MRxD ( MRxD ),
+ .MRxErr ( MRxErr ),
+
+ // Flow-control signals
+ .pause_quanta ( pause_quanta ),
+ .pause_quanta_val ( pause_quanta_val ),
+ .rx_fifo_space ( rx_fifo_space ),
+
+ // User interface
+ .Rx_mac_empty ( Rx_mac_empty ),
+ .Rx_mac_rd ( Rx_mac_rd ),
+ .Rx_mac_data ( Rx_mac_data ),
+ .Rx_mac_BE ( Rx_mac_BE ),
+ .Rx_mac_sop ( Rx_mac_sop ),
+ .Rx_mac_eop ( Rx_mac_eop ),
+ .Rx_mac_err ( Rx_mac_err ),
+
+ // CPU
+ .MAC_rx_add_chk_en ( MAC_rx_add_chk_en ),
+ .MAC_add_prom_data ( MAC_rx_add_prom_data ),
+ .MAC_add_prom_add ( MAC_rx_add_prom_add ),
+ .MAC_add_prom_wr ( MAC_rx_add_prom_wr ),
+ .broadcast_filter_en ( broadcast_filter_en ),
+ .broadcast_bucket_depth ( broadcast_bucket_depth ),
+ .broadcast_bucket_interval( broadcast_bucket_interval ),
+ .RX_APPEND_CRC ( RX_APPEND_CRC ),
+ .Rx_Hwmark ( Rx_Hwmark ),
+ .Rx_Lwmark ( Rx_Lwmark ),
+ .CRC_chk_en ( CRC_chk_en ),
+ .RX_IFG_SET ( RX_IFG_SET ),
+ .RX_MAX_LENGTH ( RX_MAX_LENGTH ),
+ .RX_MIN_LENGTH ( RX_MIN_LENGTH ),
+
+ // RMON interface
+ .Rx_pkt_length_rmon ( Rx_pkt_length_rmon ),
+ .Rx_apply_rmon ( Rx_apply_rmon ),
+ .Rx_pkt_err_type_rmon ( Rx_pkt_err_type_rmon ),
+ .Rx_pkt_type_rmon ( Rx_pkt_type_rmon ),
+
+ .rx_fifo_occupied(rx_fifo_occupied),
+ .rx_fifo_full(rx_fifo_full),
+ .rx_fifo_empty(rx_fifo_empty),
+ .debug(debug_rx)
+ );
+
+ MAC_tx #(.TX_FF_DEPTH(TX_FF_DEPTH))
+ U_MAC_tx(
+ .Reset ( rst_mac_tx ),
+ .Clk ( MAC_tx_clk_div ),
+ //.Clk_user ( Clk_user ),
+ .Clk_user ( MAC_tx_clk_div ),
+
+ // PHY interface
+ .TxD ( MTxD ),
+ .TxEn ( MTxEn ),
+ .CRS ( MCRS ),
+
+ // RMON
+ .Tx_pkt_type_rmon ( Tx_pkt_type_rmon ),
+ .Tx_pkt_length_rmon ( Tx_pkt_length_rmon ),
+ .Tx_apply_rmon ( Tx_apply_rmon ),
+ .Tx_pkt_err_type_rmon( Tx_pkt_err_type_rmon ),
+
+ // User interface
+ .Tx_mac_wa ( Tx_mac_wa ),
+ .Tx_mac_wr ( Tx_mac_wr ),
+ .Tx_mac_data ( Tx_mac_data ),
+ .Tx_mac_BE ( Tx_mac_BE ),
+ .Tx_mac_sop ( Tx_mac_sop ),
+ .Tx_mac_eop ( Tx_mac_eop ),
+
+ // Host interface
+ .Tx_Hwmark ( Tx_Hwmark ),
+ .Tx_Lwmark ( Tx_Lwmark ),
+ .MAC_tx_add_en ( MAC_tx_add_en ),
+ .FullDuplex ( FullDuplex ),
+ .MaxRetry ( MaxRetry ),
+ .IFGset ( IFGset ),
+ .MAC_add_prom_data ( MAC_tx_add_prom_data ),
+ .MAC_add_prom_add ( MAC_tx_add_prom_add ),
+ .MAC_add_prom_wr ( MAC_tx_add_prom_wr ),
+
+ .pause_apply ( pause_apply ),
+ .pause_quanta_sub ( pause_quanta_sub ),
+ .pause_quanta_set ( pause_quanta_set ),
+ .xoff_gen ( xoff_gen ),
+ .xon_gen ( xon_gen ),
+ .xoff_gen_complete ( xoff_gen_complete ),
+ .xon_gen_complete ( xon_gen_complete ),
+ .debug0(debug_tx0),
+ .debug1(debug_tx1)
+ );
+
+ // Flow control outbound -- when other side sends PAUSE, we wait
+ flow_ctrl_tx flow_ctrl_tx
+ (.rst(rst_mac_tx),
+ .tx_clk(MAC_tx_clk_div),
+ // Setting
+ .tx_pause_en ( tx_pause_en ),
+ // From RX side
+ .pause_quanta (pause_quanta),
+ .pause_quanta_val(pause_quanta_val), // Other guy sent a PAUSE
+ // To TX side
+ .pause_apply (pause_apply), // To TX, stop sending new frames
+ .pause_quanta_sub (pause_quanta_sub) // From TX, indicates we have used up 1 quanta
+ );
+
+ flow_ctrl_rx flow_ctrl_rx // When we are running out of RX space, send a PAUSE
+ (.rst(rst_mac_rx), // FIXME
+ // Settings
+ .pause_frame_send_en ( pause_frame_send_en ),
+ .pause_quanta_set ( pause_quanta_set ),
+ .fc_hwmark (fc_hwmark),
+ .fc_lwmark (fc_lwmark),
+ // From RX side
+ .rx_clk(MAC_rx_clk_div),
+ .rx_fifo_space (rx_fifo_space), // Decide if we need to send a PAUSE
+ // To TX side
+ .tx_clk(MAC_tx_clk_div),
+ .xoff_gen (xoff_gen),
+ .xon_gen(xon_gen), // Tell our TX to send PAUSE frames
+ .xoff_gen_complete (xoff_gen_complete),
+ .xon_gen_complete(xon_gen_complete)
+ );
+
+ RMON U_RMON(
+ .Clk ( CLK_I ),
+ .Reset ( RST_I ),
+
+ // Tx RMON
+ .Tx_pkt_type_rmon ( Tx_pkt_type_rmon ),
+ .Tx_pkt_length_rmon ( Tx_pkt_length_rmon ),
+ .Tx_apply_rmon ( Tx_apply_rmon ),
+ .Tx_pkt_err_type_rmon( Tx_pkt_err_type_rmon ),
+
+ // Rx RMON
+ .Rx_pkt_type_rmon ( Rx_pkt_type_rmon ),
+ .Rx_pkt_length_rmon ( Rx_pkt_length_rmon ),
+ .Rx_apply_rmon ( Rx_apply_rmon ),
+ .Rx_pkt_err_type_rmon( Rx_pkt_err_type_rmon ),
+
+ // CPU
+ .CPU_rd_addr ( CPU_rd_addr ),
+ .CPU_rd_apply ( CPU_rd_apply ),
+ .CPU_rd_grant ( CPU_rd_grant ),
+ .CPU_rd_dout ( CPU_rd_dout )
+ );
+
+ Phy_int U_Phy_int(
+ .rst_mac_rx ( rst_mac_rx ),
+ .rst_mac_tx ( rst_mac_tx ),
+ .MAC_rx_clk ( MAC_rx_clk ),
+ .MAC_tx_clk ( MAC_tx_clk ),
+ // Rx interface
+ .MCrs_dv ( MCrs_dv ),
+ .MRxD ( MRxD ),
+ .MRxErr ( MRxErr ),
+ // Tx interface
+ .MTxD ( MTxD ),
+ .MTxEn ( MTxEn ),
+ .MCRS ( MCRS ),
+ // PHY interface
+ .Tx_er ( Tx_er ),
+ .Tx_en ( Tx_en ),
+ .Txd ( Txd ),
+ .Rx_er ( Rx_er ),
+ .Rx_dv ( Rx_dv ),
+ .Rxd ( Rxd ),
+ .Crs ( Crs ),
+ .Col ( Col ),
+ // Host interface
+ .Line_loop_en( Line_loop_en ),
+ .Speed ( Speed ) );
+
+ Clk_ctrl U_Clk_ctrl(
+ .Reset ( rst_mac ),
+ .Clk_125M ( Clk_125M ),
+
+ // Host interface
+ .Speed ( Speed ),
+
+ // Phy interface
+ .Gtx_clk ( Gtx_clk ),
+ .Rx_clk ( Rx_clk ),
+ .Tx_clk ( Tx_clk ),
+
+ // Interface clocks
+ .MAC_tx_clk ( MAC_tx_clk ),
+ .MAC_rx_clk ( MAC_rx_clk ),
+ .MAC_tx_clk_div( MAC_tx_clk_div ),
+ .MAC_rx_clk_div( MAC_rx_clk_div )
+ );
+
+ eth_miim U_eth_miim(
+ .Clk ( CLK_I ),
+ .Reset ( RST_I ),
+ .Divider ( Divider ),
+ .NoPre ( NoPre ),
+ .CtrlData ( CtrlData ),
+ .Rgad ( Rgad ),
+ .Fiad ( Fiad ),
+ .WCtrlData ( WCtrlData ),
+ .RStat ( RStat ),
+ .ScanStat ( ScanStat ),
+ .Mdio ( Mdio ),
+ .Mdc ( Mdc ),
+ .Busy ( Busy ),
+ .Prsd ( Prsd ),
+ .LinkFail ( LinkFail ),
+ .Nvalid ( Nvalid ),
+ .WCtrlDataStart ( WCtrlDataStart ),
+ .RStatStart ( RStatStart ),
+ .UpdateMIIRX_DATAReg( UpdateMIIRX_DATAReg )
+ );
+
+ Reg_int U_Reg_int(
+ // Wishbone compliant core host interface
+ .CLK_I( CLK_I ),
+ .RST_I( RST_I ),
+ .STB_I( STB_I ),
+ .CYC_I( CYC_I ),
+ .ADR_I( ADR_I ),
+ .WE_I ( WE_I ),
+ .DAT_I( DAT_I ),
+ .DAT_O( DAT_O ),
+ .ACK_O( ACK_O ),
+
+ // Tx host interface
+ .Tx_Hwmark ( Tx_Hwmark ),
+ .Tx_Lwmark ( Tx_Lwmark ),
+ .MAC_tx_add_en ( MAC_tx_add_en ),
+ .FullDuplex ( FullDuplex ),
+ .MaxRetry ( MaxRetry ),
+ .IFGset ( IFGset ),
+ .MAC_tx_add_prom_data ( MAC_tx_add_prom_data ),
+ .MAC_tx_add_prom_add ( MAC_tx_add_prom_add ),
+ .MAC_tx_add_prom_wr ( MAC_tx_add_prom_wr ),
+
+ // Rx host interface
+ .MAC_rx_add_chk_en ( MAC_rx_add_chk_en ),
+ .MAC_rx_add_prom_data ( MAC_rx_add_prom_data ),
+ .MAC_rx_add_prom_add ( MAC_rx_add_prom_add ),
+ .MAC_rx_add_prom_wr ( MAC_rx_add_prom_wr ),
+ .broadcast_filter_en ( broadcast_filter_en ),
+ .broadcast_bucket_depth ( broadcast_bucket_depth ),
+ .broadcast_bucket_interval( broadcast_bucket_interval ),
+ .RX_APPEND_CRC ( RX_APPEND_CRC ),
+ .Rx_Hwmark ( Rx_Hwmark ),
+ .Rx_Lwmark ( Rx_Lwmark ),
+ .CRC_chk_en ( CRC_chk_en ),
+ .RX_IFG_SET ( RX_IFG_SET ),
+ .RX_MAX_LENGTH ( RX_MAX_LENGTH ),
+ .RX_MIN_LENGTH ( RX_MIN_LENGTH ),
+
+ // Flow Control settings
+ .pause_frame_send_en ( pause_frame_send_en ),
+ .pause_quanta_set ( pause_quanta_set ),
+ .tx_pause_en ( tx_pause_en ),
+ .fc_hwmark ( fc_hwmark ),
+ .fc_lwmark ( fc_lwmark ),
+
+ // RMON host interface
+ .CPU_rd_addr ( CPU_rd_addr ),
+ .CPU_rd_apply ( CPU_rd_apply ),
+ .CPU_rd_grant ( CPU_rd_grant ),
+ .CPU_rd_dout ( CPU_rd_dout ),
+
+ // PHY int host interface
+ .Line_loop_en ( Line_loop_en ),
+ .Speed ( Speed ),
+
+ // MII to CPU
+ .Divider ( Divider ),
+ .CtrlData ( CtrlData ),
+ .Rgad ( Rgad ),
+ .Fiad ( Fiad ),
+ .NoPre ( NoPre ),
+ .WCtrlData ( WCtrlData ),
+ .RStat ( RStat ),
+ .ScanStat ( ScanStat ),
+ .Busy ( Busy ),
+ .LinkFail ( LinkFail ),
+ .Nvalid ( Nvalid ),
+ .Prsd ( Prsd ),
+ .WCtrlDataStart ( WCtrlDataStart ),
+ .RStatStart ( RStatStart ),
+ .UpdateMIIRX_DATAReg ( UpdateMIIRX_DATAReg )
+ );
+
+ assign debug0 = {xon_gen, xoff_gen, Tx_en, Rx_dv};
+ //assign debug0 = {{debug_rx[3:0], xon_gen, xon_gen_complete, xoff_gen, xoff_gen_complete},
+ // {1'b0,Rx_mac_err,Rx_mac_empty,Rx_mac_rd,Rx_mac_sop,Rx_mac_eop,Rx_mac_BE[1:0]},
+ // {rx_fifo_space}};
+ //assign debug0 = debug_tx0;
+ //assign debug1 = debug_tx1;
+endmodule
diff --git a/eth/rtl/verilog/MAC_tx.v b/eth/rtl/verilog/MAC_tx.v new file mode 100644 index 000000000..50b08dffb --- /dev/null +++ b/eth/rtl/verilog/MAC_tx.v @@ -0,0 +1,245 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// MAC_tx.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: MAC_tx.v,v $
+// Revision 1.4 2006/11/17 17:53:07 maverickist
+// no message
+//
+// Revision 1.3 2006/01/19 14:07:53 maverickist
+// verification is complete.
+//
+// Revision 1.2 2005/12/16 06:44:14 Administrator
+// replaced tab with space.
+// passed 9.6k length frame test.
+//
+// Revision 1.1.1.1 2005/12/13 01:51:44 Administrator
+// no message
+//
+
+module MAC_tx
+ #(parameter TX_FF_DEPTH = 9)
+ (
+input Reset ,
+input Clk ,
+input Clk_user ,
+ //PHY interface
+output [7:0] TxD ,
+output TxEn ,
+input CRS ,
+ //RMON
+output [2:0] Tx_pkt_type_rmon ,
+output [15:0] Tx_pkt_length_rmon ,
+output Tx_apply_rmon ,
+output [2:0] Tx_pkt_err_type_rmon,
+ //user interface
+output Tx_mac_wa ,
+input Tx_mac_wr ,
+input [31:0] Tx_mac_data ,
+input [1:0] Tx_mac_BE ,//big endian
+input Tx_mac_sop ,
+input Tx_mac_eop ,
+ //host interface
+input [4:0] Tx_Hwmark ,
+input [4:0] Tx_Lwmark ,
+input MAC_tx_add_en ,
+input FullDuplex ,
+input [3:0] MaxRetry ,
+input [5:0] IFGset ,
+input [7:0] MAC_add_prom_data ,
+input [2:0] MAC_add_prom_add ,
+input MAC_add_prom_wr ,
+ // Flow control stuff
+input pause_apply ,
+output pause_quanta_sub,
+input [15:0] pause_quanta_set ,
+input xoff_gen,
+input xon_gen,
+output xoff_gen_complete,
+output xon_gen_complete,
+ output [31:0] debug0,
+ output [31:0] debug1
+);
+
+ // ******************************************************************************
+ // internal signals
+ // ******************************************************************************
+ //CRC_gen Interface
+wire CRC_init ;
+wire[7:0] Frame_data ;
+wire Data_en ;
+wire CRC_rd ;
+wire CRC_end ;
+wire[7:0] CRC_out ;
+ //Random_gen interface
+wire Random_init ;
+wire[3:0] RetryCnt ;
+wire Random_time_meet ;//levle hight indicate random time passed away
+ //flow control
+ //MAC_rx_FF
+wire[7:0] Fifo_data ;
+wire Fifo_rd ;
+wire Fifo_eop ;
+wire Fifo_da ;
+wire Fifo_rd_finish ;
+wire Fifo_rd_retry ;
+wire Fifo_ra ;
+wire Fifo_data_err_empty ;
+wire Fifo_data_err_full ;
+ //MAC_tx_addr_add
+wire MAC_tx_addr_init ;
+wire MAC_tx_addr_rd ;
+wire[7:0] MAC_tx_addr_data ;
+
+//******************************************************************************
+//instantiation
+//******************************************************************************
+MAC_tx_ctrl U_MAC_tx_ctrl(
+.Reset (Reset ),
+.Clk (Clk ),
+ //CRC_gen Interface (//CRC_gen Interface ),
+.CRC_init (CRC_init ),
+.Frame_data (Frame_data ),
+.Data_en (Data_en ),
+.CRC_rd (CRC_rd ),
+.CRC_end (CRC_end ),
+.CRC_out (CRC_out ),
+ //Random_gen interfac (//Random_gen interfac ),
+.Random_init (Random_init ),
+.RetryCnt (RetryCnt ),
+.Random_time_meet (Random_time_meet ),
+ //flow control (//flow control ),
+.pause_apply (pause_apply ),
+.pause_quanta_sub (pause_quanta_sub ),
+.xoff_gen (xoff_gen ),
+.xoff_gen_complete (xoff_gen_complete ),
+.xon_gen (xon_gen ),
+.xon_gen_complete (xon_gen_complete ),
+ //MAC_tx_FF (//MAC_tx_FF ),
+.Fifo_data (Fifo_data ),
+.Fifo_rd (Fifo_rd ),
+.Fifo_eop (Fifo_eop ),
+.Fifo_da (Fifo_da ),
+.Fifo_rd_finish (Fifo_rd_finish ),
+.Fifo_rd_retry (Fifo_rd_retry ),
+.Fifo_ra (Fifo_ra ),
+.Fifo_data_err_empty (Fifo_data_err_empty ),
+.Fifo_data_err_full (Fifo_data_err_full ),
+ //RMII (//RMII ),
+.TxD (TxD ),
+.TxEn (TxEn ),
+.CRS (CRS ),
+ //MAC_tx_addr_add (//MAC_tx_addr_add ),
+.MAC_tx_addr_rd (MAC_tx_addr_rd ),
+.MAC_tx_addr_data (MAC_tx_addr_data ),
+.MAC_tx_addr_init (MAC_tx_addr_init ),
+ //RMON (//RMON ),
+.Tx_pkt_type_rmon (Tx_pkt_type_rmon ),
+.Tx_pkt_length_rmon (Tx_pkt_length_rmon ),
+.Tx_apply_rmon (Tx_apply_rmon ),
+.Tx_pkt_err_type_rmon (Tx_pkt_err_type_rmon ),
+ //CPU (//CPU ),
+.pause_quanta_set (pause_quanta_set ),
+.MAC_tx_add_en (MAC_tx_add_en ),
+.FullDuplex (FullDuplex ),
+.MaxRetry (MaxRetry ),
+.IFGset (IFGset )
+);
+
+CRC_gen U_CRC_gen(
+.Reset (Reset ),
+.Clk (Clk ),
+.Init (CRC_init ),
+.Frame_data (Frame_data ),
+.Data_en (Data_en ),
+.CRC_rd (CRC_rd ),
+.CRC_out (CRC_out ),
+.CRC_end (CRC_end )
+);
+
+ MAC_tx_addr_add U_MAC_tx_addr_add
+ (.Reset (Reset ),
+ .Clk (Clk ),
+ .MAC_tx_addr_rd (MAC_tx_addr_rd ),
+ .MAC_tx_addr_init (MAC_tx_addr_init ),
+ .MAC_tx_addr_data (MAC_tx_addr_data ),
+ //CPU
+ .MAC_add_prom_data (MAC_add_prom_data ),
+ .MAC_add_prom_add (MAC_add_prom_add ),
+ .MAC_add_prom_wr (MAC_add_prom_wr )
+ );
+
+MAC_tx_FF #(.TX_FF_DEPTH(TX_FF_DEPTH)) U_MAC_tx_FF(
+.Reset (Reset ),
+.Clk_MAC (Clk ),
+.Clk_SYS (Clk_user ),
+ //MAC_rx_ctrl interf (//MAC_rx_ctrl interf ),
+.Fifo_data (Fifo_data ),
+.Fifo_rd (Fifo_rd ),
+.Fifo_rd_finish (Fifo_rd_finish ),
+.Fifo_rd_retry (Fifo_rd_retry ),
+.Fifo_eop (Fifo_eop ),
+.Fifo_da (Fifo_da ),
+.Fifo_ra (Fifo_ra ),
+.Fifo_data_err_empty (Fifo_data_err_empty ),
+.Fifo_data_err_full (Fifo_data_err_full ),
+ //user interface (//user interface ),
+.Tx_mac_wa (Tx_mac_wa ),
+.Tx_mac_wr (Tx_mac_wr ),
+.Tx_mac_data (Tx_mac_data ),
+.Tx_mac_BE (Tx_mac_BE ),
+.Tx_mac_sop (Tx_mac_sop ),
+.Tx_mac_eop (Tx_mac_eop ),
+ //host interface (//host interface ),
+.FullDuplex (FullDuplex ),
+.Tx_Hwmark (Tx_Hwmark ),
+.Tx_Lwmark (Tx_Lwmark ),
+.debug0(debug0),
+.debug1(debug1)
+);
+
+Random_gen U_Random_gen(
+.Reset (Reset ),
+.Clk (Clk ),
+.Init (Random_init ),
+.RetryCnt (RetryCnt ),
+.Random_time_meet (Random_time_meet )
+);
+
+endmodule
diff --git a/eth/rtl/verilog/MAC_tx/CRC_gen.v b/eth/rtl/verilog/MAC_tx/CRC_gen.v new file mode 100644 index 000000000..4a16e7c36 --- /dev/null +++ b/eth/rtl/verilog/MAC_tx/CRC_gen.v @@ -0,0 +1,169 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// CRC_gen.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: CRC_gen.v,v $
+// Revision 1.3 2006/01/19 14:07:54 maverickist
+// verification is complete.
+//
+// Revision 1.2 2005/12/16 06:44:17 Administrator
+// replaced tab with space.
+// passed 9.6k length frame test.
+//
+// Revision 1.1.1.1 2005/12/13 01:51:45 Administrator
+// no message
+//
+
+module CRC_gen (
+Reset ,
+Clk ,
+Init ,
+Frame_data ,
+Data_en ,
+CRC_rd ,
+CRC_end ,
+CRC_out
+
+);
+input Reset ;
+input Clk ;
+input Init ;
+input [7:0] Frame_data ;
+input Data_en ;
+input CRC_rd ;
+output [7:0] CRC_out ;
+output CRC_end ;
+
+//******************************************************************************
+//internal signals
+//******************************************************************************
+reg [7:0] CRC_out ;
+reg [31:0] CRC_reg;
+reg CRC_end;
+reg [3:0] Counter;
+//******************************************************************************
+//******************************************************************************
+//input data width is 8bit, and the first bit is bit[0]
+function[31:0] NextCRC;
+ input[7:0] D;
+ input[31:0] C;
+ reg[31:0] NewCRC;
+ begin
+ NewCRC[0]=C[24]^C[30]^D[1]^D[7];
+ NewCRC[1]=C[25]^C[31]^D[0]^D[6]^C[24]^C[30]^D[1]^D[7];
+ NewCRC[2]=C[26]^D[5]^C[25]^C[31]^D[0]^D[6]^C[24]^C[30]^D[1]^D[7];
+ NewCRC[3]=C[27]^D[4]^C[26]^D[5]^C[25]^C[31]^D[0]^D[6];
+ NewCRC[4]=C[28]^D[3]^C[27]^D[4]^C[26]^D[5]^C[24]^C[30]^D[1]^D[7];
+ NewCRC[5]=C[29]^D[2]^C[28]^D[3]^C[27]^D[4]^C[25]^C[31]^D[0]^D[6]^C[24]^C[30]^D[1]^D[7];
+ NewCRC[6]=C[30]^D[1]^C[29]^D[2]^C[28]^D[3]^C[26]^D[5]^C[25]^C[31]^D[0]^D[6];
+ NewCRC[7]=C[31]^D[0]^C[29]^D[2]^C[27]^D[4]^C[26]^D[5]^C[24]^D[7];
+ NewCRC[8]=C[0]^C[28]^D[3]^C[27]^D[4]^C[25]^D[6]^C[24]^D[7];
+ NewCRC[9]=C[1]^C[29]^D[2]^C[28]^D[3]^C[26]^D[5]^C[25]^D[6];
+ NewCRC[10]=C[2]^C[29]^D[2]^C[27]^D[4]^C[26]^D[5]^C[24]^D[7];
+ NewCRC[11]=C[3]^C[28]^D[3]^C[27]^D[4]^C[25]^D[6]^C[24]^D[7];
+ NewCRC[12]=C[4]^C[29]^D[2]^C[28]^D[3]^C[26]^D[5]^C[25]^D[6]^C[24]^C[30]^D[1]^D[7];
+ NewCRC[13]=C[5]^C[30]^D[1]^C[29]^D[2]^C[27]^D[4]^C[26]^D[5]^C[25]^C[31]^D[0]^D[6];
+ NewCRC[14]=C[6]^C[31]^D[0]^C[30]^D[1]^C[28]^D[3]^C[27]^D[4]^C[26]^D[5];
+ NewCRC[15]=C[7]^C[31]^D[0]^C[29]^D[2]^C[28]^D[3]^C[27]^D[4];
+ NewCRC[16]=C[8]^C[29]^D[2]^C[28]^D[3]^C[24]^D[7];
+ NewCRC[17]=C[9]^C[30]^D[1]^C[29]^D[2]^C[25]^D[6];
+ NewCRC[18]=C[10]^C[31]^D[0]^C[30]^D[1]^C[26]^D[5];
+ NewCRC[19]=C[11]^C[31]^D[0]^C[27]^D[4];
+ NewCRC[20]=C[12]^C[28]^D[3];
+ NewCRC[21]=C[13]^C[29]^D[2];
+ NewCRC[22]=C[14]^C[24]^D[7];
+ NewCRC[23]=C[15]^C[25]^D[6]^C[24]^C[30]^D[1]^D[7];
+ NewCRC[24]=C[16]^C[26]^D[5]^C[25]^C[31]^D[0]^D[6];
+ NewCRC[25]=C[17]^C[27]^D[4]^C[26]^D[5];
+ NewCRC[26]=C[18]^C[28]^D[3]^C[27]^D[4]^C[24]^C[30]^D[1]^D[7];
+ NewCRC[27]=C[19]^C[29]^D[2]^C[28]^D[3]^C[25]^C[31]^D[0]^D[6];
+ NewCRC[28]=C[20]^C[30]^D[1]^C[29]^D[2]^C[26]^D[5];
+ NewCRC[29]=C[21]^C[31]^D[0]^C[30]^D[1]^C[27]^D[4];
+ NewCRC[30]=C[22]^C[31]^D[0]^C[28]^D[3];
+ NewCRC[31]=C[23]^C[29]^D[2];
+ NextCRC=NewCRC;
+ end
+ endfunction
+//******************************************************************************
+
+always @ (posedge Clk) // or posedge Reset)
+// if (Reset)
+// CRC_reg <=32'hffffffff;
+// else
+ if (Init)
+ CRC_reg <=32'hffffffff;
+ else if (Data_en)
+ CRC_reg <=NextCRC(Frame_data,CRC_reg);
+ else if (CRC_rd)
+ CRC_reg <={CRC_reg[23:0],8'hff};
+
+always @ (CRC_rd or CRC_reg)
+// if (CRC_rd)
+ CRC_out <=~{
+ CRC_reg[24],
+ CRC_reg[25],
+ CRC_reg[26],
+ CRC_reg[27],
+ CRC_reg[28],
+ CRC_reg[29],
+ CRC_reg[30],
+ CRC_reg[31]
+ };
+// else
+// CRC_out <=0;
+
+//caculate CRC out length ,4 cycles
+//CRC_end aligned to last CRC checksum data
+always @(posedge Clk or posedge Reset)
+ if (Reset)
+ Counter <=0;
+ else if (!CRC_rd)
+ Counter <=0;
+ else
+ Counter <=Counter + 1;
+
+always @ (Counter)
+ if (Counter==3)
+ CRC_end=1;
+ else
+ CRC_end=0;
+
+endmodule
+
+
diff --git a/eth/rtl/verilog/MAC_tx/MAC_tx_FF.v b/eth/rtl/verilog/MAC_tx/MAC_tx_FF.v new file mode 100644 index 000000000..e62346fb7 --- /dev/null +++ b/eth/rtl/verilog/MAC_tx/MAC_tx_FF.v @@ -0,0 +1,722 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// MAC_tx_FF.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+
+module MAC_tx_FF
+ #(parameter TX_FF_DEPTH = 9)
+ (input Reset ,
+ input Clk_MAC ,
+ input Clk_SYS ,
+ //MAC_tx_ctrl
+ output reg [7:0]Fifo_data ,
+ input Fifo_rd ,
+ input Fifo_rd_finish ,
+ input Fifo_rd_retry ,
+ output reg Fifo_eop ,
+ output reg Fifo_da ,
+ output reg Fifo_ra ,
+ output reg Fifo_data_err_empty ,
+ output Fifo_data_err_full ,
+ //user interface
+ output reg Tx_mac_wa ,
+ input Tx_mac_wr ,
+ input [31:0] Tx_mac_data ,
+ input [1:0] Tx_mac_BE ,//big endian
+ input Tx_mac_sop ,
+ input Tx_mac_eop ,
+ //host interface
+ input FullDuplex ,
+ input [4:0] Tx_Hwmark ,
+ input [4:0] Tx_Lwmark ,
+ output [31:0] debug0,
+ output [31:0] debug1
+ );
+
+//******************************************************************************
+//internal signals
+//******************************************************************************
+localparam MAC_byte3 =4'd00;
+localparam MAC_byte2 =4'd01;
+localparam MAC_byte1 =4'd02;
+localparam MAC_byte0 =4'd03;
+localparam MAC_wait_finish =4'd04;
+localparam MAC_retry =4'd08;
+localparam MAC_idle =4'd09;
+localparam MAC_FFEmpty =4'd10;
+localparam MAC_FFEmpty_drop =4'd11;
+localparam MAC_pkt_sub =4'd12;
+localparam MAC_FF_Err =4'd13;
+
+
+reg [3:0] Next_state_MAC ;
+
+
+localparam SYS_idle =4'd0;
+localparam SYS_WaitSop =4'd1;
+localparam SYS_SOP =4'd2;
+localparam SYS_MOP =4'd3;
+localparam SYS_DROP =4'd4;
+localparam SYS_EOP_ok =4'd5;
+localparam SYS_FFEmpty =4'd6;
+localparam SYS_EOP_err =4'd7;
+localparam SYS_SOP_err =4'd8;
+
+reg [3:0] Next_state_SYS;
+
+reg [TX_FF_DEPTH-1:0] Add_wr ;
+reg [TX_FF_DEPTH-1:0] Add_wr_ungray ;
+reg [TX_FF_DEPTH-1:0] Add_wr_gray ;
+reg [TX_FF_DEPTH-1:0] Add_wr_gray_dl1 ;
+reg [TX_FF_DEPTH-1:0] Add_wr_gray_dl2 ;
+
+reg [TX_FF_DEPTH-1:0] Add_rd ;
+reg [TX_FF_DEPTH-1:0] Add_rd_reg ;
+reg [TX_FF_DEPTH-1:0] Add_rd_gray ;
+reg [TX_FF_DEPTH-1:0] Add_rd_gray_dl1 ;
+reg [TX_FF_DEPTH-1:0] Add_rd_gray_dl2 ;
+reg [TX_FF_DEPTH-1:0] Add_rd_ungray ;
+wire[35:0] Din ;
+wire[35:0] Dout ;
+reg Wr_en ;
+wire[TX_FF_DEPTH-1:0] Add_wr_pluse;
+wire[TX_FF_DEPTH-1:0] Add_wr_pluse_pluse;
+reg [TX_FF_DEPTH-1:TX_FF_DEPTH-5] Add_rd_reg_dl1;
+
+reg [3:0] Current_state_MAC;
+reg [3:0] Current_state_MAC_reg;
+reg [3:0] Current_state_SYS;
+reg Full;
+reg AlmostFull;
+reg Empty;
+reg [35:0] Dout_reg;
+reg Packet_number_sub_edge;
+reg Packet_number_add;
+reg [5:0] Packet_number_inFF;
+reg [5:0] Packet_number_inFF_reg;
+reg Dout_reg_en;
+reg Add_rd_add;
+
+
+reg Tx_mac_wr_dl1 ;
+reg [31:0] Tx_mac_data_dl1 ;
+reg [1:0] Tx_mac_BE_dl1 ;
+reg FF_FullErr ;
+wire[1:0] Dout_BE ;
+wire Dout_eop ;
+wire Dout_err ;
+wire[31:0] Dout_data ;
+reg Packet_number_sub_dl1 ;
+reg Packet_number_sub_dl2 ;
+reg [4:0] Fifo_data_count ;
+reg Fifo_ra_tmp ;
+reg Pkt_sub_apply_tmp ;
+reg Pkt_sub_apply ;
+reg Add_rd_reg_rdy_tmp ;
+reg Add_rd_reg_rdy ;
+reg Add_rd_reg_rdy_dl1 ;
+reg Add_rd_reg_rdy_dl2 ;
+reg [4:0] Tx_Hwmark_pl ;
+reg [4:0] Tx_Lwmark_pl ;
+reg Add_rd_jump_tmp ;
+reg Add_rd_jump_tmp_pl1 ;
+reg Add_rd_jump ;
+reg Add_rd_jump_wr_pl1 ;
+
+//******************************************************************************
+//write data to from FF .
+//domain Clk_SYS
+//******************************************************************************
+always @ (posedge Clk_SYS or posedge Reset)
+ if (Reset)
+ Current_state_SYS <=SYS_idle;
+ else
+ Current_state_SYS <=Next_state_SYS;
+
+always @ (Current_state_SYS or Tx_mac_wr or Tx_mac_sop or Full or AlmostFull
+ or Tx_mac_eop )
+ case (Current_state_SYS)
+ SYS_idle:
+ if (Tx_mac_wr&&Tx_mac_sop&&!Full)
+ Next_state_SYS =SYS_SOP;
+ else
+ Next_state_SYS =Current_state_SYS ;
+ SYS_SOP:
+ Next_state_SYS =SYS_MOP;
+ SYS_MOP:
+ if (AlmostFull)
+ Next_state_SYS =SYS_DROP;
+ else if (Tx_mac_wr&&Tx_mac_sop)
+ Next_state_SYS =SYS_SOP_err;
+ else if (Tx_mac_wr&&Tx_mac_eop)
+ Next_state_SYS =SYS_EOP_ok;
+ else
+ Next_state_SYS =Current_state_SYS ;
+ SYS_EOP_ok:
+ if (Tx_mac_wr&&Tx_mac_sop)
+ Next_state_SYS =SYS_SOP;
+ else
+ Next_state_SYS =SYS_idle;
+ SYS_EOP_err:
+ if (Tx_mac_wr&&Tx_mac_sop)
+ Next_state_SYS =SYS_SOP;
+ else
+ Next_state_SYS =SYS_idle;
+ SYS_SOP_err:
+ Next_state_SYS =SYS_DROP;
+ SYS_DROP: //FIFO overflow
+ if (Tx_mac_wr&&Tx_mac_eop)
+ Next_state_SYS =SYS_EOP_err;
+ else
+ Next_state_SYS =Current_state_SYS ;
+ default:
+ Next_state_SYS =SYS_idle;
+ endcase
+
+//delay signals
+always @ (posedge Clk_SYS or posedge Reset)
+ if (Reset)
+ begin
+ Tx_mac_wr_dl1 <=0;
+ Tx_mac_data_dl1 <=0;
+ Tx_mac_BE_dl1 <=0;
+ end
+ else
+ begin
+ Tx_mac_wr_dl1 <=Tx_mac_wr ;
+ Tx_mac_data_dl1 <=Tx_mac_data ;
+ Tx_mac_BE_dl1 <=Tx_mac_BE ;
+ end
+
+always @(Current_state_SYS)
+ if (Current_state_SYS==SYS_EOP_err)
+ FF_FullErr =1;
+ else
+ FF_FullErr =0;
+
+reg Tx_mac_eop_gen;
+
+always @(Current_state_SYS)
+ if (Current_state_SYS==SYS_EOP_err||Current_state_SYS==SYS_EOP_ok)
+ Tx_mac_eop_gen =1;
+ else
+ Tx_mac_eop_gen =0;
+
+assign Din={Tx_mac_eop_gen,FF_FullErr,Tx_mac_BE_dl1,Tx_mac_data_dl1};
+
+always @(Current_state_SYS or Tx_mac_wr_dl1)
+ if ((Current_state_SYS==SYS_SOP||Current_state_SYS==SYS_EOP_ok||
+ Current_state_SYS==SYS_MOP||Current_state_SYS==SYS_EOP_err)&&Tx_mac_wr_dl1)
+ Wr_en = 1;
+ else
+ Wr_en = 0;
+
+
+//
+
+
+always @ (posedge Reset or posedge Clk_SYS)
+ if (Reset)
+ Add_wr_gray <=0;
+ else
+ begin : Add_wr_gray_loop
+ integer i;
+ Add_wr_gray[TX_FF_DEPTH-1] <=Add_wr[TX_FF_DEPTH-1];
+ for (i=TX_FF_DEPTH-2;i>=0;i=i-1)
+ Add_wr_gray[i] <=Add_wr[i+1]^Add_wr[i];
+ end
+
+always @ (posedge Clk_SYS or posedge Reset)
+ if (Reset)
+ Add_rd_gray_dl1 <=0;
+ else
+ Add_rd_gray_dl1 <=Add_rd_gray;
+
+ always @(posedge Clk_SYS or posedge Reset)
+ if (Reset)
+ Add_rd_gray_dl2 <= 0;
+ else
+ Add_rd_gray_dl2 <= Add_rd_gray_dl1;
+
+always @ (posedge Clk_SYS or posedge Reset)
+ if (Reset)
+ Add_rd_jump_wr_pl1 <=0;
+ else
+ Add_rd_jump_wr_pl1 <=Add_rd_jump;
+
+always @ (posedge Clk_SYS or posedge Reset)
+ if (Reset)
+ Add_rd_ungray =0;
+ else if (!Add_rd_jump_wr_pl1)
+ begin : Add_rd_ungray_loop
+ integer i;
+ Add_rd_ungray[TX_FF_DEPTH-1] = Add_rd_gray_dl2[TX_FF_DEPTH-1];
+ for (i=TX_FF_DEPTH-2;i>=0;i=i-1)
+ Add_rd_ungray[i] = Add_rd_ungray[i+1]^Add_rd_gray_dl2[i];
+ end
+
+assign Add_wr_pluse =Add_wr+1;
+assign Add_wr_pluse_pluse =Add_wr+4;
+
+always @ (Add_wr_pluse or Add_rd_ungray)
+ if (Add_wr_pluse==Add_rd_ungray)
+ Full =1;
+ else
+ Full =0;
+
+always @ (posedge Clk_SYS or posedge Reset)
+ if (Reset)
+ AlmostFull <=0;
+ else if (Add_wr_pluse_pluse==Add_rd_ungray)
+ AlmostFull <=1;
+ else
+ AlmostFull <=0;
+
+always @ (posedge Clk_SYS or posedge Reset)
+ if (Reset)
+ Add_wr <= 0;
+ else if (Wr_en&&!Full)
+ Add_wr <= Add_wr +1;
+
+always @ (posedge Clk_SYS or posedge Reset)
+ if (Reset)
+ begin
+ Packet_number_sub_dl1 <=0;
+ Packet_number_sub_dl2 <=0;
+ end
+ else
+ begin
+ Packet_number_sub_dl1 <=Pkt_sub_apply;
+ Packet_number_sub_dl2 <=Packet_number_sub_dl1;
+ end
+
+always @ (posedge Clk_SYS or posedge Reset)
+ if (Reset)
+ Packet_number_sub_edge <=0;
+ else if (Packet_number_sub_dl1&!Packet_number_sub_dl2)
+ Packet_number_sub_edge <=1;
+ else
+ Packet_number_sub_edge <=0;
+
+always @ (posedge Clk_SYS or posedge Reset)
+ if (Reset)
+ Packet_number_add <=0;
+ else if (Current_state_SYS==SYS_EOP_ok||Current_state_SYS==SYS_EOP_err)
+ Packet_number_add <=1;
+ else
+ Packet_number_add <=0;
+
+
+always @ (posedge Clk_SYS or posedge Reset)
+ if (Reset)
+ Packet_number_inFF <=0;
+ else if (Packet_number_add&&!Packet_number_sub_edge)
+ Packet_number_inFF <=Packet_number_inFF + 1'b1;
+ else if (!Packet_number_add&&Packet_number_sub_edge)
+ Packet_number_inFF <=Packet_number_inFF - 1'b1;
+
+
+always @ (posedge Clk_SYS or posedge Reset)
+ if (Reset)
+ Packet_number_inFF_reg <=0;
+ else
+ Packet_number_inFF_reg <=Packet_number_inFF;
+
+always @ (posedge Clk_SYS or posedge Reset)
+ if (Reset)
+ begin
+ Add_rd_reg_rdy_dl1 <=0;
+ Add_rd_reg_rdy_dl2 <=0;
+ end
+ else
+ begin
+ Add_rd_reg_rdy_dl1 <=Add_rd_reg_rdy;
+ Add_rd_reg_rdy_dl2 <=Add_rd_reg_rdy_dl1;
+ end
+
+always @ (posedge Clk_SYS or posedge Reset)
+ if (Reset)
+ Add_rd_reg_dl1 <=0;
+ else if (Add_rd_reg_rdy_dl1&!Add_rd_reg_rdy_dl2)
+ Add_rd_reg_dl1 <=Add_rd_reg[TX_FF_DEPTH-1:TX_FF_DEPTH-5];
+
+
+
+always @ (posedge Clk_SYS or posedge Reset)
+ if (Reset)
+ Fifo_data_count <=0;
+ else if (FullDuplex)
+ Fifo_data_count <=Add_wr[TX_FF_DEPTH-1:TX_FF_DEPTH-5]-Add_rd_ungray[TX_FF_DEPTH-1:TX_FF_DEPTH-5];
+ else
+ Fifo_data_count <=Add_wr[TX_FF_DEPTH-1:TX_FF_DEPTH-5]-Add_rd_reg_dl1[TX_FF_DEPTH-1:TX_FF_DEPTH-5]; //for half duplex backoff requirement
+
+
+always @ (posedge Clk_SYS or posedge Reset)
+ if (Reset)
+ Fifo_ra_tmp <=0;
+ else if (Packet_number_inFF_reg>=1||Fifo_data_count>=Tx_Lwmark)
+ Fifo_ra_tmp <=1;
+ else
+ Fifo_ra_tmp <=0;
+
+always @ (posedge Clk_SYS or posedge Reset)
+ if (Reset)
+ begin
+ Tx_Hwmark_pl <=0;
+ Tx_Lwmark_pl <=0;
+ end
+ else
+ begin
+ Tx_Hwmark_pl <=Tx_Hwmark;
+ Tx_Lwmark_pl <=Tx_Lwmark;
+ end
+
+always @ (posedge Clk_SYS or posedge Reset)
+ if (Reset)
+ Tx_mac_wa <=0;
+ else if (Fifo_data_count>=Tx_Hwmark_pl)
+ Tx_mac_wa <=0;
+ else if (Fifo_data_count<Tx_Lwmark_pl)
+ Tx_mac_wa <=1;
+
+//******************************************************************************
+//rd data to from FF .
+//domain Clk_MAC
+//******************************************************************************
+reg[35:0] Dout_dl1;
+
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Dout_dl1 <=0;
+ else
+ Dout_dl1 <=Dout;
+
+always @ (Current_state_MAC or Next_state_MAC)
+ if ((Current_state_MAC==MAC_idle||Current_state_MAC==MAC_byte0)&&Next_state_MAC==MAC_byte3)
+ Dout_reg_en =1;
+ else
+ Dout_reg_en =0;
+
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Dout_reg <=0;
+ else if (Dout_reg_en)
+ Dout_reg <=Dout_dl1;
+
+assign {Dout_eop,Dout_err,Dout_BE,Dout_data}=Dout_reg;
+
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Current_state_MAC <=MAC_idle;
+ else
+ Current_state_MAC <=Next_state_MAC;
+
+always @ (Current_state_MAC or Fifo_rd or Dout_BE or Dout_eop or Fifo_rd_retry
+ or Fifo_rd_finish or Empty or Fifo_rd or Fifo_eop)
+ case (Current_state_MAC)
+ MAC_idle:
+ if (Empty&&Fifo_rd)
+ Next_state_MAC=MAC_FF_Err;
+ else if (Fifo_rd)
+ Next_state_MAC=MAC_byte3;
+ else
+ Next_state_MAC=Current_state_MAC;
+ MAC_byte3:
+ if (Fifo_rd_retry)
+ Next_state_MAC=MAC_retry;
+ else if (Fifo_eop)
+ Next_state_MAC=MAC_wait_finish;
+ else if (Fifo_rd&&!Fifo_eop)
+ Next_state_MAC=MAC_byte2;
+ else
+ Next_state_MAC=Current_state_MAC;
+ MAC_byte2:
+ if (Fifo_rd_retry)
+ Next_state_MAC=MAC_retry;
+ else if (Fifo_eop)
+ Next_state_MAC=MAC_wait_finish;
+ else if (Fifo_rd&&!Fifo_eop)
+ Next_state_MAC=MAC_byte1;
+ else
+ Next_state_MAC=Current_state_MAC;
+ MAC_byte1:
+ if (Fifo_rd_retry)
+ Next_state_MAC=MAC_retry;
+ else if (Fifo_eop)
+ Next_state_MAC=MAC_wait_finish;
+ else if (Fifo_rd&&!Fifo_eop)
+ Next_state_MAC=MAC_byte0;
+ else
+ Next_state_MAC=Current_state_MAC;
+ MAC_byte0:
+ if (Empty&&Fifo_rd&&!Fifo_eop)
+ Next_state_MAC=MAC_FFEmpty;
+ else if (Fifo_rd_retry)
+ Next_state_MAC=MAC_retry;
+ else if (Fifo_eop)
+ Next_state_MAC=MAC_wait_finish;
+ else if (Fifo_rd&&!Fifo_eop)
+ Next_state_MAC=MAC_byte3;
+ else
+ Next_state_MAC=Current_state_MAC;
+ MAC_retry:
+ Next_state_MAC=MAC_idle;
+ MAC_wait_finish:
+ if (Fifo_rd_finish)
+ Next_state_MAC=MAC_pkt_sub;
+ else
+ Next_state_MAC=Current_state_MAC;
+ MAC_pkt_sub:
+ Next_state_MAC=MAC_idle;
+ MAC_FFEmpty:
+ if (!Empty)
+ Next_state_MAC=MAC_byte3;
+ else
+ Next_state_MAC=Current_state_MAC;
+ MAC_FF_Err: //stopped state-machine need change
+ Next_state_MAC=Current_state_MAC;
+ default
+ Next_state_MAC=MAC_idle;
+ endcase
+//
+always @ (posedge Reset or posedge Clk_MAC)
+ if (Reset)
+ Add_rd_gray <=0;
+ else
+ begin : Add_rd_gray_loop
+ integer i;
+ Add_rd_gray[TX_FF_DEPTH-1] <=Add_rd[TX_FF_DEPTH-1];
+ for (i=TX_FF_DEPTH-2;i>=0;i=i-1)
+ Add_rd_gray[i] <= Add_rd[i+1]^Add_rd[i];
+ end
+//
+
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Add_wr_gray_dl1 <=0;
+ else
+ Add_wr_gray_dl1 <=Add_wr_gray;
+
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Add_wr_gray_dl2 <=0;
+ else
+ Add_wr_gray_dl2 <=Add_wr_gray_dl1;
+
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Add_wr_ungray =0;
+ else
+ begin : Add_wr_ungray_loop
+ integer i;
+ Add_wr_ungray[TX_FF_DEPTH-1] = Add_wr_gray_dl2[TX_FF_DEPTH-1];
+ for (i=TX_FF_DEPTH-2;i>=0;i=i-1)
+ Add_wr_ungray[i] = Add_wr_ungray[i+1]^Add_wr_gray_dl2[i];
+ end
+
+//empty
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Empty <=1;
+ else if (Add_rd==Add_wr_ungray)
+ Empty <=1;
+ else
+ Empty <=0;
+
+//ra
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Fifo_ra <=0;
+ else
+ Fifo_ra <=Fifo_ra_tmp;
+
+
+
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Pkt_sub_apply_tmp <=0;
+ else if (Current_state_MAC==MAC_pkt_sub)
+ Pkt_sub_apply_tmp <=1;
+ else
+ Pkt_sub_apply_tmp <=0;
+
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Pkt_sub_apply <=0;
+ else if ((Current_state_MAC==MAC_pkt_sub)||Pkt_sub_apply_tmp)
+ Pkt_sub_apply <=1;
+ else
+ Pkt_sub_apply <=0;
+
+//reg Add_rd for collison retry
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Add_rd_reg <=0;
+ else if (Fifo_rd_finish)
+ Add_rd_reg <=Add_rd;
+
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Add_rd_reg_rdy_tmp <=0;
+ else if (Fifo_rd_finish)
+ Add_rd_reg_rdy_tmp <=1;
+ else
+ Add_rd_reg_rdy_tmp <=0;
+
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Add_rd_reg_rdy <=0;
+ else if (Fifo_rd_finish||Add_rd_reg_rdy_tmp)
+ Add_rd_reg_rdy <=1;
+ else
+ Add_rd_reg_rdy <=0;
+
+
+always @ (Current_state_MAC or Next_state_MAC)
+ if ((Current_state_MAC==MAC_idle||Current_state_MAC==MAC_byte0)&&Next_state_MAC==MAC_byte3)
+ Add_rd_add =1;
+ else
+ Add_rd_add =0;
+
+
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Add_rd <=0;
+ else if (Current_state_MAC==MAC_retry)
+ Add_rd <= Add_rd_reg;
+ else if (Add_rd_add)
+ Add_rd <= Add_rd + 1;
+
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Add_rd_jump_tmp <=0;
+ else if (Current_state_MAC==MAC_retry)
+ Add_rd_jump_tmp <=1;
+ else
+ Add_rd_jump_tmp <=0;
+
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Add_rd_jump_tmp_pl1 <=0;
+ else
+ Add_rd_jump_tmp_pl1 <=Add_rd_jump_tmp;
+
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Add_rd_jump <=0;
+ else if (Current_state_MAC==MAC_retry)
+ Add_rd_jump <=1;
+ else if (Add_rd_jump_tmp_pl1)
+ Add_rd_jump <=0;
+
+//gen Fifo_data
+
+
+always @ (Dout_data or Current_state_MAC)
+ case (Current_state_MAC)
+ MAC_byte3:
+ Fifo_data =Dout_data[31:24];
+ MAC_byte2:
+ Fifo_data =Dout_data[23:16];
+ MAC_byte1:
+ Fifo_data =Dout_data[15:8];
+ MAC_byte0:
+ Fifo_data =Dout_data[7:0];
+ default:
+ Fifo_data =0;
+ endcase
+
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Fifo_da <=0;
+ else if ((Current_state_MAC==MAC_byte0||Current_state_MAC==MAC_byte1||
+ Current_state_MAC==MAC_byte2||Current_state_MAC==MAC_byte3)&&Fifo_rd&&!Fifo_eop)
+ Fifo_da <=1;
+ else
+ Fifo_da <=0;
+
+//gen Fifo_data_err_empty
+assign Fifo_data_err_full=Dout_err;
+//gen Fifo_data_err_empty
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Current_state_MAC_reg <=0;
+ else
+ Current_state_MAC_reg <=Current_state_MAC;
+
+always @ (posedge Clk_MAC or posedge Reset)
+ if (Reset)
+ Fifo_data_err_empty <=0;
+ else if (Current_state_MAC_reg==MAC_FFEmpty)
+ Fifo_data_err_empty <=1;
+ else
+ Fifo_data_err_empty <=0;
+
+//always @ (posedge Clk_MAC)
+// if (Current_state_MAC_reg==MAC_FF_Err)
+// begin
+// $finish(2);
+// $display("mac_tx_FF meet error status at time :%t",$time);
+// end
+
+//gen Fifo_eop aligned to last valid data byte
+always @ ( Current_state_MAC or Dout_eop or Dout_BE )
+ if ( ( ( Current_state_MAC==MAC_byte0 && Dout_BE==2'b00 ) ||
+ ( Current_state_MAC==MAC_byte1 && Dout_BE==2'b11 ) ||
+ ( Current_state_MAC==MAC_byte2 && Dout_BE==2'b10 ) ||
+ ( Current_state_MAC==MAC_byte3 && Dout_BE==2'b01 ) ) && Dout_eop )
+ Fifo_eop = 1;
+ else
+ Fifo_eop = 0;
+
+ // Dual port RAM for FIFO
+ ram_2port #(.DWIDTH(36),.AWIDTH(TX_FF_DEPTH)) mac_tx_ff_ram
+ (.clka(Clk_SYS),.ena(1'b1),.wea(Wr_en),.addra(Add_wr),.dia(Din),.doa(),
+ .clkb(Clk_MAC),.enb(1'b1),.web(1'b0),.addrb(Add_rd),.dib(36'b0),.dob(Dout) );
+
+ assign debug0 =
+ { { 5'd0, Empty, Full, AlmostFull },
+ { Current_state_SYS, Current_state_MAC },
+ { Fifo_rd, Fifo_rd_finish, Fifo_rd_retry, Fifo_eop, Fifo_da, Fifo_ra, Fifo_data_err_empty, Fifo_data_err_full },
+ { 2'b0, Dout_BE, Tx_mac_wa, Tx_mac_wr, Tx_mac_sop, Tx_mac_eop} };
+
+ assign debug1 =
+ { { 8'd0 },
+ { 8'd0 },
+ { 8'd0 },
+ { 8'd0 } };
+
+endmodule // MAC_tx_FF
diff --git a/eth/rtl/verilog/MAC_tx/MAC_tx_addr_add.v b/eth/rtl/verilog/MAC_tx/MAC_tx_addr_add.v new file mode 100644 index 000000000..76026ce06 --- /dev/null +++ b/eth/rtl/verilog/MAC_tx/MAC_tx_addr_add.v @@ -0,0 +1,128 @@ +// ////////////////////////////////////////////////////////////////////
+// // ////
+// // MAC_tx_addr_add.v ////
+// // ////
+// // This file is part of the Ethernet IP core project ////
+// // http://www.opencores.org/projects.cgi/wr_en/ethernet_tri_mode/////
+// // ////
+// // Author(s): ////
+// // - Jon Gao (gaojon@yahoo.com) ////
+// // ////
+// // ////
+// ////////////////////////////////////////////////////////////////////
+// // ////
+// // Copyright (C) 2001 Authors ////
+// // ////
+// // This source file may be used and distributed without ////
+// // restriction provided that this copyright statement is not ////
+// // removed from the file and that any derivative work contains ////
+// // the original copyright notice and the associated disclaimer. ////
+// // ////
+// // This source file is free software; you can redistribute it ////
+// // and/or modify it under the terms of the GNU Lesser General ////
+// // Public License as published by the Free Software Foundation; ////
+// // either version 2.1 of the License, or (at your option) any ////
+// // later version. ////
+// // ////
+// // This source is distributed in the hope that it will be ////
+// // useful, but WITHOUT ANY WARRANTY; without even the implied ////
+// // warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+// // PURPOSE. See the GNU Lesser General Public License for more ////
+// // details. ////
+// // ////
+// // You should have received a copy of the GNU Lesser General ////
+// // Public License along with this source; if not, download it ////
+// // from http://www.opencores.org/lgpl.shtml ////
+// // ////
+// ////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: MAC_tx_addr_add.v,v $
+// Revision 1.3 2006/01/19 14:07:54 maverickist
+// verification is complete.
+//
+// Revision 1.2 2005/12/16 06:44:18 Administrator
+// replaced tab with space.
+// passed 9.6k length frame test.
+//
+// Revision 1.1.1.1 2005/12/13 01:51:45 Administrator
+// no message
+//
+
+module MAC_tx_addr_add
+ (Reset ,
+ Clk ,
+ MAC_tx_addr_init ,
+ MAC_tx_addr_rd ,
+ MAC_tx_addr_data ,
+ //CPU ,
+ MAC_add_prom_data ,
+ MAC_add_prom_add ,
+ MAC_add_prom_wr
+ );
+
+ input Reset ;
+ input Clk ;
+ input MAC_tx_addr_rd ;
+ input MAC_tx_addr_init ;
+ output [7:0] MAC_tx_addr_data ;
+ //CPU ;
+ input [7:0] MAC_add_prom_data ;
+ input [2:0] MAC_add_prom_add ;
+ input MAC_add_prom_wr ;
+
+ // ******************************************************************************
+ // internal signals
+ // ******************************************************************************
+ reg [2:0] add_rd;
+ wire [2:0] add_wr;
+ wire [7:0] din;
+ //wire [7:0] dout;
+ reg [7:0] dout;
+ wire wr_en;
+ reg MAC_add_prom_wr_dl1;
+ reg MAC_add_prom_wr_dl2;
+ // ******************************************************************************
+ // write data from cpu to prom
+ // ******************************************************************************
+ always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ begin
+ MAC_add_prom_wr_dl1 <=0;
+ MAC_add_prom_wr_dl2 <=0;
+ end
+ else
+ begin
+ MAC_add_prom_wr_dl1 <=MAC_add_prom_wr;
+ MAC_add_prom_wr_dl2 <=MAC_add_prom_wr_dl1;
+ end
+
+ assign wr_en =MAC_add_prom_wr_dl1&!MAC_add_prom_wr_dl2;
+ assign add_wr =MAC_add_prom_add;
+ assign din =MAC_add_prom_data;
+
+ // ******************************************************************************
+ // read data from cpu to prom
+ // ******************************************************************************
+ always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ add_rd <=0;
+ else if (MAC_tx_addr_init)
+ add_rd <=0;
+ else if (MAC_tx_addr_rd)
+ add_rd <=add_rd + 1;
+ assign MAC_tx_addr_data=dout;
+ // ******************************************************************************
+ // b port for read ,a port for write .
+ // ******************************************************************************
+
+ reg [7:0] address_ram [0:7];
+ always @(posedge Clk)
+ if(wr_en)
+ address_ram[add_wr] <= din;
+
+ always @(posedge Clk)
+ dout <= address_ram[add_rd];
+
+endmodule // MAC_tx_addr_add
diff --git a/eth/rtl/verilog/MAC_tx/MAC_tx_ctrl.v b/eth/rtl/verilog/MAC_tx/MAC_tx_ctrl.v new file mode 100644 index 000000000..0fd7c603e --- /dev/null +++ b/eth/rtl/verilog/MAC_tx/MAC_tx_ctrl.v @@ -0,0 +1,648 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// MAC_tx_ctrl.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: MAC_tx_Ctrl.v,v $
+// Revision 1.4 2006/06/25 04:58:56 maverickist
+// no message
+//
+// Revision 1.3 2006/01/19 14:07:54 maverickist
+// verification is complete.
+//
+// Revision 1.3 2005/12/16 06:44:17 Administrator
+// replaced tab with space.
+// passed 9.6k length frame test.
+//
+// Revision 1.2 2005/12/13 12:15:38 Administrator
+// no message
+//
+// Revision 1.1.1.1 2005/12/13 01:51:45 Administrator
+// no message
+//
+
+module MAC_tx_ctrl (
+Reset ,
+Clk ,
+//CRC_gen Interface
+CRC_init ,
+Frame_data ,
+Data_en ,
+CRC_rd ,
+CRC_end ,
+CRC_out ,
+//Ramdon_gen interfac
+Random_init ,
+RetryCnt ,
+Random_time_meet ,
+//flow control
+pause_apply ,
+pause_quanta_sub ,
+xoff_gen ,
+xoff_gen_complete ,
+xon_gen ,
+xon_gen_complete ,
+//MAC_tx_FF
+Fifo_data ,
+Fifo_rd ,
+Fifo_eop ,
+Fifo_da ,
+Fifo_rd_finish ,
+Fifo_rd_retry ,
+Fifo_ra ,
+Fifo_data_err_empty ,
+Fifo_data_err_full ,
+//RMII
+TxD ,
+TxEn ,
+CRS ,
+//MAC_tx_addr_add
+MAC_tx_addr_rd ,
+MAC_tx_addr_data ,
+MAC_tx_addr_init ,
+//RMON
+Tx_pkt_type_rmon ,
+Tx_pkt_length_rmon ,
+Tx_apply_rmon ,
+Tx_pkt_err_type_rmon,
+//CPU
+pause_quanta_set ,
+MAC_tx_add_en ,
+FullDuplex ,
+MaxRetry ,
+IFGset
+);
+
+input Reset ;
+input Clk ;
+ //CRC_gen Interface
+output CRC_init ;
+output [7:0] Frame_data ;
+output Data_en ;
+output CRC_rd ;
+input CRC_end ;
+input [7:0] CRC_out ;
+ //Ramdon_gen interface
+output Random_init ;
+output [3:0] RetryCnt ;
+input Random_time_meet ;//levle hight indicate random time passed away
+ //flow control
+input pause_apply ;
+output pause_quanta_sub ;
+input xoff_gen ;
+output xoff_gen_complete ;
+input xon_gen ;
+output xon_gen_complete ;
+ //MAC_rx_FF
+input [7:0] Fifo_data ;
+output Fifo_rd ;
+input Fifo_eop ;
+input Fifo_da ;
+output Fifo_rd_finish ;
+output Fifo_rd_retry ;
+input Fifo_ra ;
+input Fifo_data_err_empty ;
+input Fifo_data_err_full ;
+ //RMII
+output [7:0] TxD ;
+output TxEn ;
+input CRS ;
+ //MAC_tx_addr_add
+output MAC_tx_addr_init ;
+output MAC_tx_addr_rd ;
+input [7:0] MAC_tx_addr_data ;
+ //RMON
+output [2:0] Tx_pkt_type_rmon ;
+output [15:0] Tx_pkt_length_rmon ;
+output Tx_apply_rmon ;
+output [2:0] Tx_pkt_err_type_rmon;
+ //CPU
+input [15:0] pause_quanta_set ;
+input MAC_tx_add_en ;
+input FullDuplex ;
+input [3:0] MaxRetry ;
+input [5:0] IFGset ;
+//******************************************************************************
+//internal signals
+//******************************************************************************
+parameter StateIdle =4'd00;
+parameter StatePreamble =4'd01;
+parameter StateSFD =4'd02;
+parameter StateData =4'd03;
+parameter StatePause =4'd04;
+parameter StatePAD =4'd05;
+parameter StateFCS =4'd06;
+parameter StateIFG =4'd07;
+parameter StateJam =4'd08;
+parameter StateBackOff =4'd09;
+parameter StateJamDrop =4'd10;
+parameter StateFFEmptyDrop =4'd11;
+parameter StateSwitchNext =4'd12;
+parameter StateDefer =4'd13;
+parameter StateSendPauseFrame =4'd14;
+
+reg [3:0] Current_state;
+reg [3:0] Next_state;
+reg [5:0] IFG_counter;
+reg [4:0] Preamble_counter;//
+reg [7:0] TxD_tmp ;
+reg TxEn_tmp ;
+reg [15:0] Tx_pkt_length_rmon ;
+reg Tx_apply_rmon ;
+reg [2:0] Tx_pkt_err_type_rmon;
+reg [3:0] RetryCnt ;
+reg Random_init ;
+reg Fifo_rd_finish ;
+reg Fifo_rd_retry ;
+reg [7:0] TxD ;
+reg TxEn ;
+reg CRC_init ;
+reg Data_en ;
+reg CRC_rd ;
+reg Fifo_rd ;
+reg MAC_tx_addr_rd ;
+reg MAC_header_slot ;
+reg MAC_header_slot_tmp ;
+reg [2:0] Tx_pkt_type_rmon ;
+wire Collision ;
+reg MAC_tx_addr_init ;
+reg Src_MAC_ptr ;
+reg [7:0] IPLengthCounter ;//for pad append
+reg [1:0] PADCounter ;
+reg [7:0] JamCounter ;
+reg PktDrpEvenPtr ;
+reg [7:0] pause_counter ;
+reg pause_quanta_sub ;
+reg [15:0] pause_quanta_set_dl1 ;
+reg xoff_gen_complete ;
+reg xon_gen_complete ;
+//******************************************************************************
+//boundery signal processing
+//******************************************************************************
+always @(posedge Clk or posedge Reset)
+ if (Reset)
+ begin
+ pause_quanta_set_dl1 <=0;
+ end
+ else
+ begin
+ pause_quanta_set_dl1 <=pause_quanta_set ;
+ end
+//******************************************************************************
+//state machine
+//******************************************************************************
+assign Collision=TxEn&CRS;
+
+always @(posedge Clk or posedge Reset)
+ if (Reset)
+ IPLengthCounter <=0;
+ else if (Current_state==StateDefer)
+ IPLengthCounter <=0;
+ else if (IPLengthCounter!=8'hff&&(Current_state==StateData||Current_state==StateSendPauseFrame||Current_state==StatePAD))
+ IPLengthCounter <=IPLengthCounter+1;
+
+always @(posedge Clk or posedge Reset)
+ if (Reset)
+ PADCounter <=0;
+ else if (Current_state!=StatePAD)
+ PADCounter <=0;
+ else
+ PADCounter <=PADCounter+1;
+
+always @(posedge Clk or posedge Reset)
+ if (Reset)
+ Current_state <=StateDefer;
+ else
+ Current_state <=Next_state;
+
+always @ (*)
+ case (Current_state)
+ StateDefer:
+ if ((FullDuplex)||(!FullDuplex&&!CRS))
+ Next_state=StateIFG;
+ else
+ Next_state=Current_state;
+ StateIFG:
+ if (!FullDuplex&&CRS)
+ Next_state=StateDefer;
+ else if ((FullDuplex&&IFG_counter==IFGset-4)||(!FullDuplex&&!CRS&&IFG_counter==IFGset-4))//remove some additional time
+ Next_state=StateIdle;
+ else
+ Next_state=Current_state;
+ StateIdle:
+ if (!FullDuplex&&CRS)
+ Next_state=StateDefer;
+ else if (xoff_gen||xon_gen)
+ Next_state=StatePreamble;
+ else if (pause_apply)
+ Next_state=StatePause;
+ else if ((FullDuplex||~CRS)&&Fifo_ra)
+ Next_state=StatePreamble;
+ else
+ Next_state=Current_state;
+ StatePause:
+ if (pause_counter==512/8)
+ Next_state=StateDefer;
+ else if (xoff_gen||xon_gen)
+ Next_state=StateIdle;
+ else
+ Next_state=Current_state;
+ StatePreamble:
+ if (!FullDuplex&&Collision)
+ Next_state=StateJam;
+ else if ((FullDuplex&&Preamble_counter==6)||(!FullDuplex&&!Collision&&Preamble_counter==6))
+ Next_state=StateSFD;
+ else
+ Next_state=Current_state;
+ StateSFD:
+ if (!FullDuplex&&Collision)
+ Next_state=StateJam;
+ else if (xoff_gen||xon_gen)
+ Next_state=StateSendPauseFrame;
+ else
+ Next_state=StateData;
+ StateSendPauseFrame:
+ if (IPLengthCounter==17)
+ Next_state=StatePAD;
+ else
+ Next_state=Current_state;
+ StateData:
+ if (!FullDuplex&&Collision)
+ Next_state=StateJam;
+ else if (Fifo_data_err_empty)
+ Next_state=StateFFEmptyDrop;
+ else if (Fifo_eop&&IPLengthCounter>=59)//IP+MAC+TYPE=60 ,start from 0
+ Next_state=StateFCS;
+ else if (Fifo_eop)
+ Next_state=StatePAD;
+ else
+ Next_state=StateData;
+ StatePAD:
+ if (!FullDuplex&&Collision)
+ Next_state=StateJam;
+ else if (IPLengthCounter>=59)
+ Next_state=StateFCS;
+ else
+ Next_state=Current_state;
+ StateJam:
+ if (RetryCnt<=MaxRetry&&JamCounter==16)
+ Next_state=StateBackOff;
+ else if (RetryCnt>MaxRetry)
+ Next_state=StateJamDrop;
+ else
+ Next_state=Current_state;
+ StateBackOff:
+ if (Random_time_meet)
+ Next_state =StateDefer;
+ else
+ Next_state =Current_state;
+ StateFCS:
+ if (!FullDuplex&&Collision)
+ Next_state =StateJam;
+ else if (CRC_end)
+ Next_state =StateSwitchNext;
+ else
+ Next_state =Current_state;
+ StateFFEmptyDrop:
+ if (Fifo_eop)
+ Next_state =StateSwitchNext;
+ else
+ Next_state =Current_state;
+ StateJamDrop:
+ if (Fifo_eop)
+ Next_state =StateSwitchNext;
+ else
+ Next_state =Current_state;
+ StateSwitchNext:
+ Next_state =StateDefer;
+ default:
+ Next_state =StateDefer;
+ endcase
+
+
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ JamCounter <=0;
+ else if (Current_state!=StateJam)
+ JamCounter <=0;
+ else if (Current_state==StateJam)
+ JamCounter <=JamCounter+1;
+
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ RetryCnt <=0;
+ else if (Current_state==StateSwitchNext)
+ RetryCnt <=0;
+ else if (Current_state==StateJam&&Next_state==StateBackOff)
+ RetryCnt <=RetryCnt + 1;
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ IFG_counter <=0;
+ else if (Current_state!=StateIFG)
+ IFG_counter <=0;
+ else
+ IFG_counter <=IFG_counter + 1;
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ Preamble_counter <=0;
+ else if (Current_state!=StatePreamble)
+ Preamble_counter <=0;
+ else
+ Preamble_counter <=Preamble_counter+ 1;
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ PktDrpEvenPtr <=0;
+ else if(Current_state==StateJamDrop||Current_state==StateFFEmptyDrop)
+ PktDrpEvenPtr <=~PktDrpEvenPtr;
+//******************************************************************************
+//generate output signals
+//******************************************************************************
+//CRC related
+always @(Current_state)
+ if (Current_state==StateSFD)
+ CRC_init =1;
+ else
+ CRC_init =0;
+
+assign Frame_data=TxD_tmp;
+
+always @(Current_state)
+ if (Current_state==StateData||Current_state==StateSendPauseFrame||Current_state==StatePAD)
+ Data_en =1;
+ else
+ Data_en =0;
+
+always @(Current_state)
+ if (Current_state==StateFCS)
+ CRC_rd =1;
+ else
+ CRC_rd =0;
+
+//Ramdon_gen interface
+always @(Current_state or Next_state)
+ if (Current_state==StateJam&&Next_state==StateBackOff)
+ Random_init =1;
+ else
+ Random_init =0;
+
+//MAC_rx_FF
+//data have one cycle delay after fifo read signals
+always @ (*)
+ if (Current_state==StateData ||
+ Current_state==StateSFD&&!(xoff_gen||xon_gen) ||
+ Current_state==StateJamDrop&&PktDrpEvenPtr||
+ Current_state==StateFFEmptyDrop&&PktDrpEvenPtr )
+ Fifo_rd =1;
+ else
+ Fifo_rd =0;
+
+always @ (Current_state)
+ if (Current_state==StateSwitchNext)
+ Fifo_rd_finish =1;
+ else
+ Fifo_rd_finish =0;
+
+always @ (Current_state)
+ if (Current_state==StateJam)
+ Fifo_rd_retry =1;
+ else
+ Fifo_rd_retry =0;
+//RMII
+always @(Current_state)
+ if (Current_state==StatePreamble||Current_state==StateSFD||
+ Current_state==StateData||Current_state==StateSendPauseFrame||
+ Current_state==StateFCS||Current_state==StatePAD||Current_state==StateJam)
+ TxEn_tmp =1;
+ else
+ TxEn_tmp =0;
+
+//gen txd data
+always @(*)
+ case (Current_state)
+ StatePreamble:
+ TxD_tmp =8'h55;
+ StateSFD:
+ TxD_tmp =8'hd5;
+ StateData:
+ if (Src_MAC_ptr&&MAC_tx_add_en)
+ TxD_tmp =MAC_tx_addr_data;
+ else
+ TxD_tmp =Fifo_data;
+ StateSendPauseFrame:
+ if (Src_MAC_ptr&&MAC_tx_add_en)
+ TxD_tmp =MAC_tx_addr_data;
+ else
+ case (IPLengthCounter)
+ 8'd0: TxD_tmp =8'h01;
+ 8'd1: TxD_tmp =8'h80;
+ 8'd2: TxD_tmp =8'hc2;
+ 8'd3: TxD_tmp =8'h00;
+ 8'd4: TxD_tmp =8'h00;
+ 8'd5: TxD_tmp =8'h01;
+ 8'd12: TxD_tmp =8'h88;//type
+ 8'd13: TxD_tmp =8'h08;//
+ 8'd14: TxD_tmp =8'h00;//opcode
+ 8'd15: TxD_tmp =8'h01;
+ 8'd16: TxD_tmp =xon_gen?8'b0:pause_quanta_set_dl1[15:8];
+ 8'd17: TxD_tmp =xon_gen?8'b0:pause_quanta_set_dl1[7:0];
+// 8'd60: TxD_tmp =8'h26;
+// 8'd61: TxD_tmp =8'h6b;
+// 8'd62: TxD_tmp =8'hae;
+// 8'd63: TxD_tmp =8'h0a;
+ default:TxD_tmp =0;
+ endcase
+
+ StatePAD:
+ TxD_tmp =8'h00;
+ StateJam:
+ TxD_tmp =8'h01; //jam sequence
+ StateFCS:
+ TxD_tmp =CRC_out;
+ default:
+ TxD_tmp =2'b0;
+ endcase
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ begin
+ TxD <=0;
+ TxEn <=0;
+ end
+ else
+ begin
+ TxD <=TxD_tmp;
+ TxEn <=TxEn_tmp;
+ end
+//RMON
+
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ Tx_pkt_length_rmon <=0;
+ else if (Current_state==StateSFD)
+ Tx_pkt_length_rmon <=0;
+ else if (Current_state==StateData||Current_state==StateSendPauseFrame||Current_state==StatePAD||Current_state==StateFCS)
+ Tx_pkt_length_rmon <=Tx_pkt_length_rmon+1;
+
+
+reg [2:0] Tx_apply_rmon_reg;
+
+always @( posedge Clk or posedge Reset )
+ if ( Reset )
+ begin
+ Tx_apply_rmon <= 0;
+ Tx_apply_rmon_reg <= 'b0;
+ end
+ else
+ begin
+ if ( (Fifo_eop&&Current_state==StateJamDrop) ||
+ (Fifo_eop&&Current_state==StateFFEmptyDrop) ||
+ CRC_end )
+ Tx_apply_rmon <= 1;
+ else
+ if ( Tx_apply_rmon_reg[2] )
+ Tx_apply_rmon <= 0;
+
+ Tx_apply_rmon_reg <= { Tx_apply_rmon_reg[1:0], Tx_apply_rmon };
+ end
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ Tx_pkt_err_type_rmon <=0;
+ else if(Fifo_eop&&Current_state==StateJamDrop)
+ Tx_pkt_err_type_rmon <=3'b001;//
+ else if(Fifo_eop&&Current_state==StateFFEmptyDrop)
+ Tx_pkt_err_type_rmon <=3'b010;//underflow
+ else if(Fifo_eop&&Fifo_data_err_full)
+ Tx_pkt_err_type_rmon <=3'b011;//overflow
+ else if(CRC_end)
+ Tx_pkt_err_type_rmon <=3'b100;//normal
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ MAC_header_slot_tmp <=0;
+ else if(Current_state==StateSFD&&Next_state==StateData)
+ MAC_header_slot_tmp <=1;
+ else
+ MAC_header_slot_tmp <=0;
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ MAC_header_slot <=0;
+ else
+ MAC_header_slot <=MAC_header_slot_tmp;
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ Tx_pkt_type_rmon <=0;
+ else if (Current_state==StateSendPauseFrame)
+ Tx_pkt_type_rmon <=3'b100;
+ else if(MAC_header_slot)
+ Tx_pkt_type_rmon <={1'b0,TxD[7:6]};
+
+
+always @(Tx_pkt_length_rmon)
+ if (Tx_pkt_length_rmon>=6&&Tx_pkt_length_rmon<=11)
+ Src_MAC_ptr =1;
+ else
+ Src_MAC_ptr =0;
+
+//MAC_tx_addr_add
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ MAC_tx_addr_rd <=0;
+ else if ((Tx_pkt_length_rmon>=4&&Tx_pkt_length_rmon<=9)&&(MAC_tx_add_en||Current_state==StateSendPauseFrame))
+ MAC_tx_addr_rd <=1;
+ else
+ MAC_tx_addr_rd <=0;
+
+ always @*
+ //if ((Tx_pkt_length_rmon==3)&&Fifo_rd)
+ if (Current_state==StatePreamble)
+ MAC_tx_addr_init=1;
+ else
+ MAC_tx_addr_init=0;
+
+//**************************************************************************************************************
+// CFH: this implementation delays the time it sends an entire Ethernet frame with 512 bits for every pause
+// request of 512 bits. Actually, it should only delay the time it takes to transmit 512 bits, not counting
+// Ethernet header, CRC, Interframe Gap etc.
+// Hence the current implementation waits longer than the pause frame actually requests (~20% more)
+//**************************************************************************************************************
+
+//flow control
+always @(posedge Clk or posedge Reset)
+ if (Reset)
+ pause_counter <=0;
+ else if (Current_state!=StatePause)
+ pause_counter <=0;
+ else
+ pause_counter <=pause_counter+1;
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ pause_quanta_sub <=0;
+ else if(pause_counter==512/8)
+ pause_quanta_sub <=1;
+ else
+ pause_quanta_sub <=0;
+
+// FIXME The below probably won't work if the pause request comes when we are in the wrong state
+ wire clear_xonxoff = (Current_state==StateSendPauseFrame) & (IPLengthCounter==17);
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ xoff_gen_complete <=0;
+ else if(clear_xonxoff & xoff_gen)
+ xoff_gen_complete <=1;
+ else
+ xoff_gen_complete <=0;
+
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ xon_gen_complete <=0;
+ else if(clear_xonxoff & xon_gen)
+ xon_gen_complete <=1;
+ else
+ xon_gen_complete <=0;
+
+endmodule
diff --git a/eth/rtl/verilog/MAC_tx/Random_gen.v b/eth/rtl/verilog/MAC_tx/Random_gen.v new file mode 100644 index 000000000..fd57008b1 --- /dev/null +++ b/eth/rtl/verilog/MAC_tx/Random_gen.v @@ -0,0 +1,109 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// Random_gen.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+
+module Random_gen(
+Reset ,
+Clk ,
+Init ,
+RetryCnt ,
+Random_time_meet
+);
+input Reset ;
+input Clk ;
+input Init ;
+input [3:0] RetryCnt ;
+output Random_time_meet;
+
+//******************************************************************************
+//internal signals
+//******************************************************************************
+reg [9:0] Random_sequence ;
+reg [9:0] Random ;
+reg [9:0] Random_counter ;
+reg [7:0] Slot_time_counter; //256*2=512bit=1 slot time
+reg Random_time_meet;
+
+//******************************************************************************
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ Random_sequence <=0;
+ else
+ Random_sequence <={Random_sequence[8:0],~(Random_sequence[2]^Random_sequence[9])};
+
+always @ (RetryCnt or Random_sequence)
+ case (RetryCnt)
+ 4'h0 : Random={9'b0,Random_sequence[0]};
+ 4'h1 : Random={8'b0,Random_sequence[1:0]};
+ 4'h2 : Random={7'b0,Random_sequence[2:0]};
+ 4'h3 : Random={6'b0,Random_sequence[3:0]};
+ 4'h4 : Random={5'b0,Random_sequence[4:0]};
+ 4'h5 : Random={4'b0,Random_sequence[5:0]};
+ 4'h6 : Random={3'b0,Random_sequence[6:0]};
+ 4'h7 : Random={2'b0,Random_sequence[7:0]};
+ 4'h8 : Random={1'b0,Random_sequence[8:0]};
+ 4'h9 : Random={ Random_sequence[9:0]};
+ default : Random={ Random_sequence[9:0]};
+ endcase
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ Slot_time_counter <=0;
+ else if(Init)
+ Slot_time_counter <=0;
+ else if(!Random_time_meet)
+ Slot_time_counter <=Slot_time_counter+1;
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ Random_counter <=0;
+ else if (Init)
+ Random_counter <=Random;
+ else if (Random_counter!=0&&Slot_time_counter==255)
+ Random_counter <=Random_counter -1 ;
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ Random_time_meet <=1;
+ else if (Init)
+ Random_time_meet <=0;
+ else if (Random_counter==0)
+ Random_time_meet <=1;
+
+endmodule
+
+
diff --git a/eth/rtl/verilog/Phy_int.v b/eth/rtl/verilog/Phy_int.v new file mode 100644 index 000000000..c85d4f64b --- /dev/null +++ b/eth/rtl/verilog/Phy_int.v @@ -0,0 +1,205 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// Phy_int.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: Phy_int.v,v $
+// Revision 1.3 2006/01/19 14:07:53 maverickist
+// verification is complete.
+//
+// Revision 1.3 2005/12/16 06:44:14 Administrator
+// replaced tab with space.
+// passed 9.6k length frame test.
+//
+// Revision 1.2 2005/12/13 12:15:36 Administrator
+// no message
+//
+// Revision 1.1.1.1 2005/12/13 01:51:44 Administrator
+// no message
+//
+
+module Phy_int
+ (input rst_mac_rx,
+ input rst_mac_tx,
+ input MAC_rx_clk,
+ input MAC_tx_clk,
+
+ // Rx interface
+ output reg MCrs_dv,
+ output reg [7:0] MRxD,
+ output MRxErr,
+
+ // Tx interface
+ input [7:0] MTxD,
+ input MTxEn,
+ output MCRS,
+
+ // PHY interface
+ output Tx_er,
+ output reg Tx_en,
+ output reg [7:0] Txd,
+ input Rx_er,
+ input Rx_dv,
+ input [7:0] Rxd,
+ input Crs,
+ input Col,
+
+ // Host interface
+ input Line_loop_en,
+ input [2:0] Speed );
+
+ //-------------------------------------------------------------------------
+ // Local declarations
+ //-------------------------------------------------------------------------
+
+ reg [7:0] MTxD_dl1;
+ reg MTxEn_dl1;
+ reg Tx_odd_data_ptr;
+ reg Rx_odd_data_ptr;
+ reg Rx_er_dl1;
+ reg Rx_dv_dl1;
+ reg Rx_dv_dl2;
+ reg [7:0] Rxd_dl1;
+ reg [7:0] Rxd_dl2;
+ reg Crs_dl1;
+
+ //-------------------------------------------------------------------------
+ // Tx control
+ //-------------------------------------------------------------------------
+
+ // Reg boundary signals
+ always @( posedge MAC_tx_clk or posedge rst_mac_tx )
+ if ( rst_mac_tx )
+ begin
+ MTxD_dl1 <= 0;
+ MTxEn_dl1 <= 0;
+ end
+ else
+ begin
+ MTxD_dl1 <= MTxD;
+ MTxEn_dl1 <= MTxEn;
+ end
+
+ always @( posedge MAC_tx_clk or posedge rst_mac_tx )
+ if ( rst_mac_tx )
+ Tx_odd_data_ptr <= 0;
+ else if ( !MTxD_dl1 )
+ Tx_odd_data_ptr <= 0;
+ else
+ Tx_odd_data_ptr <= !Tx_odd_data_ptr;
+
+
+ always @( posedge MAC_tx_clk or posedge rst_mac_tx )
+ if ( rst_mac_tx )
+ Txd <= 0;
+ else if ( Speed[2] && MTxEn_dl1 )
+ Txd <= MTxD_dl1;
+ else if ( MTxEn_dl1 && !Tx_odd_data_ptr )
+ Txd <= { 4'b0, MTxD_dl1[3:0] };
+ else if ( MTxEn_dl1 && Tx_odd_data_ptr )
+ Txd <= { 4'b0, MTxD_dl1[7:4] };
+ else
+ Txd <=0;
+
+ always @( posedge MAC_tx_clk or posedge rst_mac_tx )
+ if ( rst_mac_tx )
+ Tx_en <= 0;
+ else if ( MTxEn_dl1 )
+ Tx_en <= 1;
+ else
+ Tx_en <= 0;
+
+ assign Tx_er = 0;
+
+ //-------------------------------------------------------------------------
+ // Rx control
+ //-------------------------------------------------------------------------
+
+ // Reg boundery signals
+ always @( posedge MAC_rx_clk or posedge rst_mac_rx )
+ if ( rst_mac_rx )
+ begin
+ Rx_er_dl1 <= 0;
+ Rx_dv_dl1 <= 0;
+ Rx_dv_dl2 <= 0;
+ Rxd_dl1 <= 0;
+ Rxd_dl2 <= 0;
+ Crs_dl1 <= 0;
+ end
+ else
+ begin
+ Rx_er_dl1 <= Rx_er;
+ Rx_dv_dl1 <= Rx_dv;
+ Rx_dv_dl2 <= Rx_dv_dl1;
+ Rxd_dl1 <= Rxd;
+ Rxd_dl2 <= Rxd_dl1;
+ Crs_dl1 <= Crs;
+ end
+
+ assign MRxErr = Rx_er_dl1;
+ assign MCRS = Crs_dl1;
+
+ always @( posedge MAC_rx_clk or posedge rst_mac_rx )
+ if ( rst_mac_rx )
+ MCrs_dv <= 0;
+ else if ( Line_loop_en )
+ MCrs_dv <= Tx_en;
+ else if( Rx_dv_dl2 )
+ MCrs_dv <= 1;
+ else
+ MCrs_dv <= 0;
+
+ always @ ( posedge MAC_rx_clk or posedge rst_mac_rx )
+ if ( rst_mac_rx )
+ Rx_odd_data_ptr <= 0;
+ else if ( !Rx_dv_dl1 )
+ Rx_odd_data_ptr <= 0;
+ else
+ Rx_odd_data_ptr <= !Rx_odd_data_ptr;
+
+ always @ ( posedge MAC_rx_clk or posedge rst_mac_rx )
+ if ( rst_mac_rx )
+ MRxD <= 0;
+ else if( Line_loop_en )
+ MRxD <= Txd;
+ else if( Speed[2] && Rx_dv_dl2 )
+ MRxD <= Rxd_dl2;
+ else if( Rx_dv_dl1 && Rx_odd_data_ptr )
+ MRxD <={ Rxd_dl1[3:0], Rxd_dl2[3:0] };
+
+endmodule
diff --git a/eth/rtl/verilog/RMON.v b/eth/rtl/verilog/RMON.v new file mode 100644 index 000000000..18a84beb5 --- /dev/null +++ b/eth/rtl/verilog/RMON.v @@ -0,0 +1,163 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// RMON.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: RMON.v,v $
+// Revision 1.4 2006/06/25 04:58:56 maverickist
+// no message
+//
+// Revision 1.3 2006/01/19 14:07:53 maverickist
+// verification is complete.
+//
+// Revision 1.2 2005/12/16 06:44:16 Administrator
+// replaced tab with space.
+// passed 9.6k length frame test.
+//
+// Revision 1.1.1.1 2005/12/13 01:51:44 Administrator
+// no message
+//
+
+module RMON
+ (input Clk ,
+ input Reset ,
+ //Tx_RMON
+ input [2:0] Tx_pkt_type_rmon ,
+ input [15:0] Tx_pkt_length_rmon ,
+ input Tx_apply_rmon ,
+ input [2:0] Tx_pkt_err_type_rmon,
+ //Tx_RMON
+ input [2:0] Rx_pkt_type_rmon ,
+ input [15:0] Rx_pkt_length_rmon ,
+ input Rx_apply_rmon ,
+ input [2:0] Rx_pkt_err_type_rmon,
+ //CPU
+ input [5:0] CPU_rd_addr ,
+ input CPU_rd_apply ,
+ output CPU_rd_grant ,
+ output [31:0] CPU_rd_dout
+ );
+
+ // ******************************************************************************
+ // interface signals
+ // ******************************************************************************
+ wire Reg_apply_0 ;
+ wire [4:0] Reg_addr_0 ;
+ wire [15:0] Reg_data_0 ;
+ wire Reg_next_0 ;
+ wire Reg_apply_1 ;
+ wire [4:0] Reg_addr_1 ;
+ wire [15:0] Reg_data_1 ;
+ wire Reg_next_1 ;
+ wire [5:0] Addra ;
+ wire [31:0] Dina ;
+ reg [31:0] Douta ;
+ wire Wea ;
+
+ // ******************************************************************************
+
+ RMON_addr_gen U_0_Rx_RMON_addr_gen
+ (.Clk (Clk ),
+ .Reset (Reset ),
+ //RMON
+ .Pkt_type_rmon (Rx_pkt_type_rmon ),
+ .Pkt_length_rmon (Rx_pkt_length_rmon ),
+ .Apply_rmon (Rx_apply_rmon ),
+ .Pkt_err_type_rmon (Rx_pkt_err_type_rmon ),
+ //Rmon_ctrl
+ .Reg_apply (Reg_apply_0 ),
+ .Reg_addr (Reg_addr_0 ),
+ .Reg_data (Reg_data_0 ),
+ .Reg_next (Reg_next_0 ),
+ //CPU
+ .Reg_drop_apply ( ) );
+
+ RMON_addr_gen U_0_Tx_RMON_addr_gen
+ (.Clk (Clk ),
+ .Reset (Reset ),
+ //RMON
+ .Pkt_type_rmon (Tx_pkt_type_rmon ),
+ .Pkt_length_rmon (Tx_pkt_length_rmon ),
+ .Apply_rmon (Tx_apply_rmon ),
+ .Pkt_err_type_rmon (Tx_pkt_err_type_rmon ),
+ //Rmon_ctrl
+ .Reg_apply (Reg_apply_1 ),
+ .Reg_addr (Reg_addr_1 ),
+ .Reg_data (Reg_data_1 ),
+ .Reg_next (Reg_next_1 ),
+ //CPU
+ .Reg_drop_apply ( ) );
+
+ RMON_ctrl U_RMON_ctrl
+ (.Clk (Clk ),
+ .Reset (Reset ),
+ //RMON_ctrl
+ .Reg_apply_0 (Reg_apply_0 ),
+ .Reg_addr_0 (Reg_addr_0 ),
+ .Reg_data_0 (Reg_data_0 ),
+ .Reg_next_0 (Reg_next_0 ),
+ .Reg_apply_1 (Reg_apply_1 ),
+ .Reg_addr_1 (Reg_addr_1 ),
+ .Reg_data_1 (Reg_data_1 ),
+ .Reg_next_1 (Reg_next_1 ),
+ //dual-port ram
+ .Addra (Addra ),
+ .Dina (Dina ),
+ .Douta (Douta ),
+ .Wea (Wea ),
+ //CPU
+ .CPU_rd_addr (CPU_rd_addr ),
+ .CPU_rd_apply (CPU_rd_apply ),
+ .CPU_rd_grant (CPU_rd_grant ),
+ .CPU_rd_dout (CPU_rd_dout ) );
+
+ reg [31:0] RMON_ram [0:63];
+ wire [31:0] Douta_imm = RMON_ram[Addra];
+ integer i;
+ initial
+ for(i=0;i<64;i=i+1)
+ RMON_ram[i] = 32'd0;
+
+ always @(posedge Clk)
+ if(Wea)
+ RMON_ram[Addra] <= Dina;
+
+ always @(posedge Clk)
+ Douta <= Douta_imm;
+
+endmodule // RMON
diff --git a/eth/rtl/verilog/RMON/RMON_addr_gen.v b/eth/rtl/verilog/RMON/RMON_addr_gen.v new file mode 100644 index 000000000..9da8d1f80 --- /dev/null +++ b/eth/rtl/verilog/RMON/RMON_addr_gen.v @@ -0,0 +1,295 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// RMON_addr_gen.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: RMON_addr_gen.v,v $
+// Revision 1.4 2006/06/25 04:58:57 maverickist
+// no message
+//
+// Revision 1.3 2006/01/19 14:07:55 maverickist
+// verification is complete.
+//
+// Revision 1.2 2005/12/16 06:44:19 Administrator
+// replaced tab with space.
+// passed 9.6k length frame test.
+//
+// Revision 1.1.1.1 2005/12/13 01:51:45 Administrator
+// no message
+//
+module RMON_addr_gen(
+Clk ,
+Reset ,
+//RMON
+Pkt_type_rmon ,
+Pkt_length_rmon ,
+Apply_rmon ,//pluse signal looks like eop
+Pkt_err_type_rmon ,
+//
+Reg_apply ,
+Reg_addr ,
+Reg_data ,
+Reg_next ,
+//CPU
+Reg_drop_apply
+);
+input Clk ;
+input Reset ;
+ //RMON
+input [2:0] Pkt_type_rmon ;
+input [15:0] Pkt_length_rmon ;
+input Apply_rmon ;//pluse signal looks like eop
+input [2:0] Pkt_err_type_rmon ;
+ //RMON_ctrl
+output Reg_apply ;
+output [4:0] Reg_addr ;
+output [15:0] Reg_data ;
+input Reg_next ;
+ //CPU
+output Reg_drop_apply ;
+
+//******************************************************************************
+//internal signals
+//******************************************************************************
+parameter StateIdle =4'd0;
+parameter StatePktLength =4'd1;
+parameter StatePktNumber =4'd2;
+parameter StatePktType =4'd3;
+parameter StatePktRange =4'd4;
+
+reg [3:0] CurrentState /* synthesys syn_keep=1 */;
+reg [3:0] NextState;
+
+reg [2:0] PktTypeReg ;
+reg [15:0] PktLengthReg ;
+reg [2:0] PktErrTypeReg ;
+
+reg Reg_apply ;
+reg [4:0] Reg_addr ;
+reg [15:0] Reg_data ;
+reg Reg_drop_apply ;
+//******************************************************************************
+//register boundery signals
+
+//******************************************************************************
+reg Apply_rmon_dl1;
+reg Apply_rmon_dl2;
+reg Apply_rmon_pulse;
+reg [2:0] Pkt_type_rmon_dl1 ;
+reg [15:0] Pkt_length_rmon_dl1 ;
+reg [2:0] Pkt_err_type_rmon_dl1 ;
+
+always @(posedge Clk or posedge Reset)
+ if (Reset)
+ begin
+ Pkt_type_rmon_dl1 <=0;
+ Pkt_length_rmon_dl1 <=0;
+ Pkt_err_type_rmon_dl1 <=0;
+ end
+ else
+ begin
+ Pkt_type_rmon_dl1 <=Pkt_type_rmon ;
+ Pkt_length_rmon_dl1 <=Pkt_length_rmon ;
+ Pkt_err_type_rmon_dl1 <=Pkt_err_type_rmon ;
+ end
+
+always @(posedge Clk or posedge Reset)
+ if (Reset)
+ begin
+ Apply_rmon_dl1 <=0;
+ Apply_rmon_dl2 <=0;
+ end
+ else
+ begin
+ Apply_rmon_dl1 <=Apply_rmon;
+ Apply_rmon_dl2 <=Apply_rmon_dl1;
+ end
+
+always @(Apply_rmon_dl1 or Apply_rmon_dl2)
+ if (Apply_rmon_dl1&!Apply_rmon_dl2)
+ Apply_rmon_pulse =1;
+ else
+ Apply_rmon_pulse =0;
+
+
+
+always @(posedge Clk or posedge Reset)
+ if (Reset)
+ begin
+ PktTypeReg <=0;
+ PktLengthReg <=0;
+ PktErrTypeReg <=0;
+ end
+ else if (Apply_rmon_pulse&&CurrentState==StateIdle)
+ begin
+ PktTypeReg <=Pkt_type_rmon_dl1 ;
+ PktLengthReg <=Pkt_length_rmon_dl1 ;
+ PktErrTypeReg <=Pkt_err_type_rmon_dl1 ;
+ end
+
+
+//******************************************************************************
+//State Machine
+//******************************************************************************
+always @(posedge Clk or posedge Reset)
+ if (Reset)
+ CurrentState <=StateIdle;
+ else
+ CurrentState <=NextState;
+
+always @(CurrentState or Apply_rmon_pulse or Reg_next)
+ case (CurrentState)
+ StateIdle:
+ if (Apply_rmon_pulse)
+ NextState =StatePktLength;
+ else
+ NextState =StateIdle;
+ StatePktLength:
+ if (Reg_next)
+ NextState =StatePktNumber;
+ else
+ NextState =CurrentState;
+ StatePktNumber:
+ if (Reg_next)
+ NextState =StatePktType;
+ else
+ NextState =CurrentState;
+ StatePktType:
+ if (Reg_next)
+ NextState =StatePktRange;
+ else
+ NextState =CurrentState;
+ StatePktRange:
+ if (Reg_next)
+ NextState =StateIdle;
+ else
+ NextState =CurrentState;
+ default:
+ NextState =StateIdle;
+ endcase
+
+//******************************************************************************
+//gen output signals
+//******************************************************************************
+//Reg_apply
+always @ (CurrentState)
+ if (CurrentState==StatePktLength||CurrentState==StatePktNumber||
+ CurrentState==StatePktType||CurrentState==StatePktRange)
+ Reg_apply =1;
+ else
+ Reg_apply =0;
+
+//Reg_addr
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ Reg_addr <=0;
+ else case (CurrentState)
+ StatePktLength:
+ Reg_addr <=5'd00;
+ StatePktNumber:
+ Reg_addr <=5'd01;
+ StatePktType:
+ case(PktTypeReg)
+ 3'b011:
+ Reg_addr <=5'd02; //broadcast
+ 3'b001:
+ Reg_addr <=5'd03; //multicast
+ 3'b100:
+ Reg_addr <=5'd16; //pause frame
+ default:
+ Reg_addr <=5'd04; //unicast
+ endcase
+ StatePktRange:
+ case(PktErrTypeReg)
+ 3'b001:
+ Reg_addr <=5'd05;
+ 3'b010:
+ Reg_addr <=5'd06;
+ 3'b011:
+ Reg_addr <=5'd07;
+ 3'b100:
+ if (PktLengthReg<64)
+ Reg_addr <=5'd08;
+ else if (PktLengthReg==64)
+ Reg_addr <=5'd09;
+ else if (PktLengthReg<128)
+ Reg_addr <=5'd10;
+ else if (PktLengthReg<256)
+ Reg_addr <=5'd11;
+ else if (PktLengthReg<512)
+ Reg_addr <=5'd12;
+ else if (PktLengthReg<1024)
+ Reg_addr <=5'd13;
+ else if (PktLengthReg<1519)
+ Reg_addr <=5'd14;
+ else
+ Reg_addr <=5'd15;
+ default:
+ Reg_addr <=5'd05;
+ endcase
+ default:
+ Reg_addr <=5'd05;
+ endcase
+
+//Reg_data
+always @ (CurrentState or PktLengthReg)
+ case (CurrentState)
+ StatePktLength:
+ Reg_data =PktLengthReg;
+ StatePktNumber:
+ Reg_data =1;
+ StatePktType:
+ Reg_data =1;
+ StatePktRange:
+ Reg_data =1;
+ default:
+ Reg_data =0;
+ endcase
+
+//Reg_drop_apply
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ Reg_drop_apply <=0;
+ else if (CurrentState!=StateIdle&&Apply_rmon_pulse)
+ Reg_drop_apply <=1;
+ else
+ Reg_drop_apply <=0;
+
+
+endmodule
+
diff --git a/eth/rtl/verilog/RMON/RMON_ctrl.v b/eth/rtl/verilog/RMON/RMON_ctrl.v new file mode 100644 index 000000000..4fc038dc8 --- /dev/null +++ b/eth/rtl/verilog/RMON/RMON_ctrl.v @@ -0,0 +1,283 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// RMON_ctrl.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: RMON_ctrl.v,v $
+// Revision 1.4 2006/06/25 04:58:57 maverickist
+// no message
+//
+// Revision 1.3 2006/01/19 14:07:55 maverickist
+// verification is complete.
+//
+// Revision 1.2 2005/12/16 06:44:19 Administrator
+// replaced tab with space.
+// passed 9.6k length frame test.
+//
+// Revision 1.1.1.1 2005/12/13 01:51:45 Administrator
+// no message
+//
+module RMON_ctrl (
+Clk ,
+Reset ,
+//RMON_ctrl
+Reg_apply_0 ,
+Reg_addr_0 ,
+Reg_data_0 ,
+Reg_next_0 ,
+Reg_apply_1 ,
+Reg_addr_1 ,
+Reg_data_1 ,
+Reg_next_1 ,
+//dual-port ram
+Addra ,
+Dina ,
+Douta ,
+Wea ,
+//CPU
+CPU_rd_addr ,
+CPU_rd_apply ,
+CPU_rd_grant ,
+CPU_rd_dout
+
+);
+input Clk ;
+input Reset ;
+ //RMON_ctrl
+input Reg_apply_0 ;
+input [4:0] Reg_addr_0 ;
+input [15:0] Reg_data_0 ;
+output Reg_next_0 ;
+input Reg_apply_1 ;
+input [4:0] Reg_addr_1 ;
+input [15:0] Reg_data_1 ;
+output Reg_next_1 ;
+ //dual-port ram
+ //port-a for Rmon
+output [5:0] Addra ;
+output [31:0] Dina ;
+input [31:0] Douta ;
+output Wea ;
+ //CPU
+input [5:0] CPU_rd_addr ;
+input CPU_rd_apply ;
+output CPU_rd_grant ;
+output [31:0] CPU_rd_dout ;
+
+
+
+
+//******************************************************************************
+//internal signals
+//******************************************************************************
+
+parameter StateCPU =4'd00;
+parameter StateMAC0 =4'd01;
+parameter StateMAC1 =4'd02;
+
+
+reg [3:0] CurrentState /* synthesys syn_keep=1 */;
+reg [3:0] NextState;
+reg [3:0] CurrentState_reg;
+
+reg [4:0] StepCounter;
+reg [5:0] Addra ;
+reg [31:0] Dina;
+reg Reg_next_0 ;
+reg Reg_next_1 ;
+reg Write;
+reg Read;
+reg Pipeline;
+reg [31:0] CPU_rd_dout ;
+reg CPU_rd_apply_reg ;
+//******************************************************************************
+//State Machine
+//******************************************************************************
+
+always @(posedge Clk or posedge Reset)
+ if (Reset)
+ CurrentState <=StateMAC0;
+ else
+ CurrentState <=NextState;
+
+always @(posedge Clk or posedge Reset)
+ if (Reset)
+ CurrentState_reg <=StateMAC0;
+ else if(CurrentState!=StateCPU)
+ CurrentState_reg <=CurrentState;
+
+always @(CurrentState or CPU_rd_apply_reg or Reg_apply_0 or CurrentState_reg
+ or Reg_apply_1
+ or StepCounter
+ )
+ case(CurrentState)
+ StateMAC0:
+ if(!Reg_apply_0&&CPU_rd_apply_reg)
+ NextState =StateCPU;
+ else if(!Reg_apply_0)
+ NextState =StateMAC1;
+ else
+ NextState =CurrentState;
+ StateMAC1:
+ if(!Reg_apply_1&&CPU_rd_apply_reg)
+ NextState =StateCPU;
+ else if(!Reg_apply_1)
+ NextState =StateMAC0;
+ else
+ NextState =CurrentState;
+ StateCPU:
+ if (StepCounter==3)
+ case (CurrentState_reg)
+ StateMAC0 :NextState =StateMAC0 ;
+ StateMAC1 :NextState =StateMAC1 ;
+ default :NextState =StateMAC0;
+ endcase
+ else
+ NextState =CurrentState;
+
+ default:
+ NextState =StateMAC0;
+ endcase
+
+
+
+always @(posedge Clk or posedge Reset)
+ if (Reset)
+ StepCounter <=0;
+ else if(NextState!=CurrentState)
+ StepCounter <=0;
+ else if (StepCounter!=4'hf)
+ StepCounter <=StepCounter + 1;
+
+//******************************************************************************
+//temp signals
+//******************************************************************************
+always @(StepCounter)
+ if( StepCounter==1||StepCounter==4||
+ StepCounter==7||StepCounter==10)
+ Read =1;
+ else
+ Read =0;
+
+always @(StepCounter or CurrentState)
+ if( StepCounter==2||StepCounter==5||
+ StepCounter==8||StepCounter==11)
+ Pipeline =1;
+ else
+ Pipeline =0;
+
+always @(StepCounter or CurrentState)
+ if( StepCounter==3||StepCounter==6||
+ StepCounter==9||StepCounter==12)
+ Write =1;
+ else
+ Write =0;
+
+
+//******************************************************************************
+//gen output signals
+//******************************************************************************
+//Addra
+always @(*)
+ case(CurrentState)
+ StateMAC0 : Addra={1'd0 ,Reg_addr_0 };
+ StateMAC1 : Addra={1'd1 ,Reg_addr_1 };
+ StateCPU: Addra=CPU_rd_addr;
+ default: Addra=0;
+ endcase
+
+//Dina
+always @(posedge Clk or posedge Reset)
+ if (Reset)
+ Dina <=0;
+ else
+ case(CurrentState)
+ StateMAC0 : Dina<=Douta+Reg_data_0 ;
+ StateMAC1 : Dina<=Douta+Reg_data_1 ;
+ StateCPU: Dina<=0;
+ default: Dina<=0;
+ endcase
+
+assign Wea =Write;
+//Reg_next
+always @(CurrentState or Pipeline)
+ if(CurrentState==StateMAC0)
+ Reg_next_0 =Pipeline;
+ else
+ Reg_next_0 =0;
+
+always @(CurrentState or Pipeline)
+ if(CurrentState==StateMAC1)
+ Reg_next_1 =Pipeline;
+ else
+ Reg_next_1 =0;
+
+
+//CPU_rd_grant
+reg CPU_rd_apply_dl1;
+reg CPU_rd_apply_dl2;
+//rising edge
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ begin
+ CPU_rd_apply_dl1 <=0;
+ CPU_rd_apply_dl2 <=0;
+ end
+ else
+ begin
+ CPU_rd_apply_dl1 <=CPU_rd_apply;
+ CPU_rd_apply_dl2 <=CPU_rd_apply_dl1;
+ end
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ CPU_rd_apply_reg <=0;
+ else if (CPU_rd_apply_dl1&!CPU_rd_apply_dl2)
+ CPU_rd_apply_reg <=1;
+ else if (CurrentState==StateCPU&&Write)
+ CPU_rd_apply_reg <=0;
+
+assign CPU_rd_grant = CPU_rd_apply & CPU_rd_apply_dl1 & CPU_rd_apply_dl2 & !CPU_rd_apply_reg;
+
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ CPU_rd_dout <=0;
+ else if (Pipeline&&CurrentState==StateCPU)
+ CPU_rd_dout <=Douta;
+
+endmodule
diff --git a/eth/rtl/verilog/Reg_int.v b/eth/rtl/verilog/Reg_int.v new file mode 100644 index 000000000..f1bea2316 --- /dev/null +++ b/eth/rtl/verilog/Reg_int.v @@ -0,0 +1,270 @@ +module Reg_int (
+ // Wishbone compliant core host interface
+ input CLK_I, // Wishbone interface clock (nominally 50 MHz)
+ input RST_I, // Active high (async) reset of the Wishbone interface
+ input STB_I, // Active high module-select
+ input CYC_I, // Active high cycle-enable
+ input [6:0] ADR_I, // Module register address
+ input WE_I, // Active high for writes, low for reads
+ input [31:0] DAT_I, // Write data
+ output reg [31:0] DAT_O, // Read data
+ output reg ACK_O, // Acknowledge output – single high pulse
+
+ // Tx host interface
+ output [4:0] Tx_Hwmark,
+ output [4:0] Tx_Lwmark,
+ output MAC_tx_add_en,
+ output FullDuplex,
+ output [3:0] MaxRetry,
+ output [5:0] IFGset,
+ output [7:0] MAC_tx_add_prom_data,
+ output [2:0] MAC_tx_add_prom_add,
+ output MAC_tx_add_prom_wr,
+
+ // Rx host interface
+ output MAC_rx_add_chk_en,
+ output [7:0] MAC_rx_add_prom_data,
+ output [2:0] MAC_rx_add_prom_add,
+ output MAC_rx_add_prom_wr,
+ output broadcast_filter_en,
+ output [15:0] broadcast_bucket_depth,
+ output [15:0] broadcast_bucket_interval,
+ output RX_APPEND_CRC,
+ output [4:0] Rx_Hwmark,
+ output [4:0] Rx_Lwmark,
+ output CRC_chk_en,
+ output [5:0] RX_IFG_SET,
+ output [15:0] RX_MAX_LENGTH, // Default 1518
+ output [6:0] RX_MIN_LENGTH, // Default 64
+
+ // Flow control settings
+ output pause_frame_send_en,
+ output [15:0] pause_quanta_set,
+ output tx_pause_en,
+ output [15:0] fc_hwmark,
+ output [15:0] fc_lwmark,
+
+ // RMON host interface
+ output [5:0] CPU_rd_addr,
+ output CPU_rd_apply,
+ input CPU_rd_grant,
+ input [31:0] CPU_rd_dout,
+
+ //Phy int host interface
+ output Line_loop_en,
+ output [2:0] Speed,
+
+ //MII to CPU
+ output [7:0] Divider, // Divider for the host clock
+ output [15:0] CtrlData, // Control Data (to be written to the PHY reg.)
+ output [4:0] Rgad, // Register Address (within the PHY)
+ output [4:0] Fiad, // PHY Address
+ output NoPre, // No Preamble (no 32-bit preamble)
+ output WCtrlData, // Write Control Data operation
+ output RStat, // Read Status operation
+ output ScanStat, // Scan Status operation
+ input Busy, // Busy Signal
+ input LinkFail, // Link Integrity Signal
+ input Nvalid, // Invalid Status (qualifier for the valid scan result)
+ input [15:0] Prsd, // Read Status Data (data read from the PHY)
+ input WCtrlDataStart, // This signals resets the WCTRLDATA bit in the MIIM Command register
+ input RStatStart, // This signal resets the RSTAT BIT in the MIIM Command register
+ input UpdateMIIRX_DATAReg // Updates MII RX_DATA register with read data
+);
+
+ // New registers for controlling the MII interface
+ wire [8:0] MIIMODER;
+ reg [2:0] MIICOMMAND;
+ wire [12:0] MIIADDRESS;
+ wire [15:0] MIITX_DATA;
+ reg [15:0] MIIRX_DATA;
+ wire [2:0] MIISTATUS;
+
+ // New registers for controlling the MII interface
+
+ // MIIMODER
+ assign NoPre = MIIMODER[8];
+ assign Divider = MIIMODER[7:0];
+ // MIICOMMAND
+ assign WCtrlData = MIICOMMAND[2];
+ assign RStat = MIICOMMAND[1];
+ assign ScanStat = MIICOMMAND[0];
+ // MIIADDRESS
+ assign Rgad = MIIADDRESS[12:8];
+ assign Fiad = MIIADDRESS[4:0];
+ // MIITX_DATA
+ assign CtrlData = MIITX_DATA[15:0];
+ // MIISTATUS
+ assign MIISTATUS[2:0] = { 13'b0, Nvalid, Busy, LinkFail };
+
+ wire Wr;
+
+ RegCPUData #( 5 ) U_0_000( Tx_Hwmark , 7'd000, 5'h09, RST_I, CLK_I, Wr, ADR_I, DAT_I[4:0] );
+ RegCPUData #( 5 ) U_0_001( Tx_Lwmark , 7'd001, 5'h08, RST_I, CLK_I, Wr, ADR_I, DAT_I[4:0] );
+ RegCPUData #( 1 ) U_0_002( pause_frame_send_en , 7'd002, 1'h0, RST_I, CLK_I, Wr, ADR_I, DAT_I[0:0] );
+ RegCPUData #( 16 ) U_0_003( pause_quanta_set , 7'd003, 16'h01af, RST_I, CLK_I, Wr, ADR_I, DAT_I[15:0] );
+ RegCPUData #( 6 ) U_0_004( IFGset , 7'd004, 6'h0c, RST_I, CLK_I, Wr, ADR_I, DAT_I[5:0] );
+ RegCPUData #( 1 ) U_0_005( FullDuplex , 7'd005, 1'h1, RST_I, CLK_I, Wr, ADR_I, DAT_I[0:0] );
+ RegCPUData #( 4 ) U_0_006( MaxRetry , 7'd006, 4'h2, RST_I, CLK_I, Wr, ADR_I, DAT_I[3:0] );
+ RegCPUData #( 1 ) U_0_007( MAC_tx_add_en , 7'd007, 1'h0, RST_I, CLK_I, Wr, ADR_I, DAT_I[0:0] );
+ RegCPUData #( 8 ) U_0_008( MAC_tx_add_prom_data , 7'd008, 8'h00, RST_I, CLK_I, Wr, ADR_I, DAT_I[7:0] );
+ RegCPUData #( 3 ) U_0_009( MAC_tx_add_prom_add , 7'd009, 3'h0, RST_I, CLK_I, Wr, ADR_I, DAT_I[2:0] );
+ RegCPUData #( 1 ) U_0_010( MAC_tx_add_prom_wr , 7'd010, 1'h0, RST_I, CLK_I, Wr, ADR_I, DAT_I[0:0] );
+ RegCPUData #( 1 ) U_0_011( tx_pause_en , 7'd011, 1'h1, RST_I, CLK_I, Wr, ADR_I, DAT_I[0:0] );
+ RegCPUData #( 16 ) U_0_012( fc_hwmark , 7'd012, 1'h0, RST_I, CLK_I, Wr, ADR_I, DAT_I[15:0] );
+ RegCPUData #( 16 ) U_0_013( fc_lwmark , 7'd013, 1'h0, RST_I, CLK_I, Wr, ADR_I, DAT_I[15:0] );
+ RegCPUData #( 1 ) U_0_014( MAC_rx_add_chk_en , 7'd014, 1'h0, RST_I, CLK_I, Wr, ADR_I, DAT_I[0:0] );
+ RegCPUData #( 8 ) U_0_015( MAC_rx_add_prom_data , 7'd015, 8'h00, RST_I, CLK_I, Wr, ADR_I, DAT_I[7:0] );
+ RegCPUData #( 3 ) U_0_016( MAC_rx_add_prom_add , 7'd016, 3'h0, RST_I, CLK_I, Wr, ADR_I, DAT_I[2:0] );
+ RegCPUData #( 1 ) U_0_017( MAC_rx_add_prom_wr , 7'd017, 1'h0, RST_I, CLK_I, Wr, ADR_I, DAT_I[0:0] );
+ RegCPUData #( 1 ) U_0_018( broadcast_filter_en , 7'd018, 1'h0, RST_I, CLK_I, Wr, ADR_I, DAT_I[0:0] );
+ RegCPUData #( 16 ) U_0_019( broadcast_bucket_depth , 7'd019, 16'h0000, RST_I, CLK_I, Wr, ADR_I, DAT_I[15:0] );
+ RegCPUData #( 16 ) U_0_020( broadcast_bucket_interval , 7'd020, 16'h0000, RST_I, CLK_I, Wr, ADR_I, DAT_I[15:0] );
+ RegCPUData #( 1 ) U_0_021( RX_APPEND_CRC , 7'd021, 1'h0, RST_I, CLK_I, Wr, ADR_I, DAT_I[0:0] );
+ RegCPUData #( 5 ) U_0_022( Rx_Hwmark , 7'd022, 5'h1a, RST_I, CLK_I, Wr, ADR_I, DAT_I[4:0] );
+ RegCPUData #( 5 ) U_0_023( Rx_Lwmark , 7'd023, 5'h10, RST_I, CLK_I, Wr, ADR_I, DAT_I[4:0] );
+ RegCPUData #( 1 ) U_0_024( CRC_chk_en , 7'd024, 1'h1, RST_I, CLK_I, Wr, ADR_I, DAT_I[0:0] );
+ RegCPUData #( 6 ) U_0_025( RX_IFG_SET , 7'd025, 6'h0c, RST_I, CLK_I, Wr, ADR_I, DAT_I[5:0] );
+ RegCPUData #( 16 ) U_0_026( RX_MAX_LENGTH , 7'd026, 16'h2710, RST_I, CLK_I, Wr, ADR_I, DAT_I[15:0] );
+ RegCPUData #( 7 ) U_0_027( RX_MIN_LENGTH , 7'd027, 7'h40, RST_I, CLK_I, Wr, ADR_I, DAT_I[6:0] );
+ RegCPUData #( 6 ) U_0_028( CPU_rd_addr , 7'd028, 6'h00, RST_I, CLK_I, Wr, ADR_I, DAT_I[5:0] );
+ RegCPUData #( 1 ) U_0_029( CPU_rd_apply , 7'd029, 1'h0, RST_I, CLK_I, Wr, ADR_I, DAT_I[0:0] );
+//RegCPUData #( 1 ) U_0_030( CPU_rd_grant , 7'd030, 1'h0, RST_I, CLK_I, Wr, ADR_I, DAT_I[0:0] );
+//RegCPUData #( 16 ) U_0_031( CPU_rd_dout_l , 7'd031, 16'h0000, RST_I, CLK_I, Wr, ADR_I, DAT_I[15:0] );
+//RegCPUData #( 16 ) U_0_032( CPU_rd_dout_h , 7'd032, 16'h0000, RST_I, CLK_I, Wr, ADR_I, DAT_I[15:0] );
+ RegCPUData #( 1 ) U_0_033( Line_loop_en , 7'd033, 1'h0, RST_I, CLK_I, Wr, ADR_I, DAT_I[0:0] );
+ RegCPUData #( 3 ) U_0_034( Speed , 7'd034, 3'h0, RST_I, CLK_I, Wr, ADR_I, DAT_I[2:0] );
+
+ // New registers for controlling the MDIO interface
+ RegCPUData #( 9 ) U_0_035( MIIMODER , 7'd035, 9'h064, RST_I, CLK_I, Wr, ADR_I, DAT_I[8:0] );
+ // Reg #36 is MIICOMMAND - implemented separately below
+ RegCPUData #( 13 ) U_0_037( MIIADDRESS , 7'd037, 13'h0000, RST_I, CLK_I, Wr, ADR_I, DAT_I[12:0] );
+ RegCPUData #( 16 ) U_0_038( MIITX_DATA , 7'd038, 16'h0000, RST_I, CLK_I, Wr, ADR_I, DAT_I[15:0] );
+
+ // Asserted in first clock of 2-cycle access, negated otherwise
+ wire Access = ~ACK_O & STB_I & CYC_I;
+
+ // Asserted in first clock of 2-cycle write access, negated otherwise
+ assign Wr = Access & WE_I;
+
+ // MIICOMMAND register - needs special treatment because of auto-resetting bits
+ always @ ( posedge RST_I or posedge CLK_I )
+ if ( RST_I )
+ MIICOMMAND <= 0;
+ else
+ begin
+ if ( Wr & ( ADR_I == 7'd036 ) )
+ // Write access
+ MIICOMMAND <= DAT_I;
+ else
+ begin
+ if ( WCtrlDataStart )
+ MIICOMMAND[2] <= 0;
+ if ( RStatStart )
+ MIICOMMAND[1] <= 0;
+ end
+ end
+
+ // MIIRX_DATA register
+ always @ ( posedge RST_I or posedge CLK_I )
+ if ( RST_I )
+ MIIRX_DATA <= 0;
+ else
+ if ( UpdateMIIRX_DATAReg )
+ MIIRX_DATA <= Prsd;
+
+ // ACK_O is asserted in second clock of 2-cycle access, negated otherwise
+ always @ ( posedge RST_I or posedge CLK_I )
+ if ( RST_I )
+ ACK_O <= 0;
+ else
+ ACK_O <= Access;
+
+ always @ ( posedge RST_I or posedge CLK_I )
+ if(RST_I)
+ DAT_O <= 0;
+ else
+ begin
+ DAT_O <=0;
+ if ( Access & ~WE_I )
+ casez ( ADR_I )
+ 7'd00: DAT_O <= Tx_Hwmark;
+ 7'd01: DAT_O <= Tx_Lwmark;
+ 7'd02: DAT_O <= pause_frame_send_en;
+ 7'd03: DAT_O <= pause_quanta_set;
+ 7'd04: DAT_O <= IFGset;
+ 7'd05: DAT_O <= FullDuplex;
+ 7'd06: DAT_O <= MaxRetry;
+ 7'd07: DAT_O <= MAC_tx_add_en;
+ 7'd08: DAT_O <= MAC_tx_add_prom_data;
+ 7'd09: DAT_O <= MAC_tx_add_prom_add;
+ 7'd10: DAT_O <= MAC_tx_add_prom_wr;
+ 7'd11: DAT_O <= tx_pause_en;
+ 7'd12: DAT_O <= fc_hwmark;
+ 7'd13: DAT_O <= fc_lwmark;
+ 7'd14: DAT_O <= MAC_rx_add_chk_en;
+ 7'd15: DAT_O <= MAC_rx_add_prom_data;
+ 7'd16: DAT_O <= MAC_rx_add_prom_add;
+ 7'd17: DAT_O <= MAC_rx_add_prom_wr;
+ 7'd18: DAT_O <= broadcast_filter_en;
+ 7'd19: DAT_O <= broadcast_bucket_depth;
+ 7'd20: DAT_O <= broadcast_bucket_interval;
+ 7'd21: DAT_O <= RX_APPEND_CRC;
+ 7'd22: DAT_O <= Rx_Hwmark;
+ 7'd23: DAT_O <= Rx_Lwmark;
+ 7'd24: DAT_O <= CRC_chk_en;
+ 7'd25: DAT_O <= RX_IFG_SET;
+ 7'd26: DAT_O <= RX_MAX_LENGTH;
+ 7'd27: DAT_O <= RX_MIN_LENGTH;
+ 7'd28: DAT_O <= CPU_rd_addr;
+ 7'd29: DAT_O <= CPU_rd_apply;
+ 7'd30: DAT_O <= CPU_rd_grant;
+ 7'd31: DAT_O <= CPU_rd_dout;
+ //7'd32: DAT_O <= CPU_rd_dout[31:16];
+ 7'd33: DAT_O <= Line_loop_en;
+ 7'd34: DAT_O <= Speed;
+
+ // New registers for controlling MII interface
+ 7'd35: DAT_O <= MIIMODER;
+ 7'd36: DAT_O <= MIICOMMAND;
+ 7'd37: DAT_O <= MIIADDRESS;
+ 7'd38: DAT_O <= MIITX_DATA;
+ 7'd39: DAT_O <= MIIRX_DATA;
+ 7'd40: DAT_O <= MIISTATUS;
+ endcase
+ end
+
+endmodule
+
+module RegCPUData(
+ RegOut,
+ RegAddr,
+ RegInit,
+
+ Reset,
+ Clk,
+ Wr,
+ Addr,
+ WrData
+);
+
+ parameter WIDTH = 16;
+
+ output reg [WIDTH-1:0] RegOut;
+ input [6:0] RegAddr;
+ input [WIDTH-1:0] RegInit;
+
+ input Reset;
+ input Clk;
+ input Wr;
+ input [6:0] Addr;
+ input [WIDTH-1:0] WrData;
+
+ always @( posedge Reset or posedge Clk )
+ if ( Reset )
+ RegOut <= RegInit;
+ else
+ if ( Wr && ( Addr == RegAddr ) )
+ RegOut <= WrData;
+
+endmodule
diff --git a/eth/rtl/verilog/TECH/eth_clk_div2.v b/eth/rtl/verilog/TECH/eth_clk_div2.v new file mode 100644 index 000000000..994907d44 --- /dev/null +++ b/eth/rtl/verilog/TECH/eth_clk_div2.v @@ -0,0 +1,71 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// eth_clk_div2.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: CLK_DIV2.v,v $
+// Revision 1.3 2006/01/19 14:07:56 maverickist
+// verification is complete.
+//
+// Revision 1.2 2005/12/16 06:44:20 Administrator
+// replaced tab with space.
+// passed 9.6k length frame test.
+//
+// Revision 1.1.1.1 2005/12/13 01:51:44 Administrator
+// no message
+//
+
+
+//////////////////////////////////////////////////////////////////////
+// This file can only used for simulation .
+// You need to replace it with your own element according to technology
+//////////////////////////////////////////////////////////////////////
+
+module eth_clk_div2 (
+ input Reset,
+ input IN,
+ output reg OUT
+);
+
+always @ (posedge IN or posedge Reset)
+ if (Reset)
+ OUT <= 0;
+ else
+ OUT <= ~OUT;
+
+endmodule
diff --git a/eth/rtl/verilog/TECH/eth_clk_switch.v b/eth/rtl/verilog/TECH/eth_clk_switch.v new file mode 100644 index 000000000..c5375743f --- /dev/null +++ b/eth/rtl/verilog/TECH/eth_clk_switch.v @@ -0,0 +1,81 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// eth_clk_switch.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: CLK_SWITCH.v,v $
+// Revision 1.3 2006/01/19 14:07:56 maverickist
+// verification is complete.
+//
+// Revision 1.2 2005/12/16 06:44:20 Administrator
+// replaced tab with space.
+// passed 9.6k length frame test.
+//
+// Revision 1.1.1.1 2005/12/13 01:51:44 Administrator
+// no message
+//
+
+`include "header.vh"
+
+//////////////////////////////////////////////////////////////////////
+// This file can only used for simulation .
+// You need to replace it with your own element according to technology
+//////////////////////////////////////////////////////////////////////
+module eth_clk_switch (
+ input IN_0,
+ input IN_1,
+ input SW,
+ output OUT
+);
+
+`ifdef MAC_TARGET_XILINX
+
+ BUFGMUX U_BUFGMUX (
+ .O ( OUT ),
+ .I0( IN_0 ),
+ .I1( IN_1 ),
+ .S ( SW )
+ );
+
+`else
+
+ assign OUT = SW ? IN_1 : IN_0;
+
+`endif
+
+endmodule
diff --git a/eth/rtl/verilog/TECH/xilinx/BUFGMUX.v b/eth/rtl/verilog/TECH/xilinx/BUFGMUX.v new file mode 100644 index 000000000..f5bb4a74a --- /dev/null +++ b/eth/rtl/verilog/TECH/xilinx/BUFGMUX.v @@ -0,0 +1,64 @@ +// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/unisims/BUFGMUX.v,v 1.9.34.2 2005/10/21 20:45:30 wloo Exp $ +/////////////////////////////////////////////////////////////////////////////// +// Copyright (c) 1995/2004 Xilinx, Inc. +// All Right Reserved. +/////////////////////////////////////////////////////////////////////////////// +// ____ ____ +// / /\/ / +// /___/ \ / Vendor : Xilinx +// \ \ \/ Version : 7.1i (H.19) +// \ \ Description : Xilinx Functional Simulation Library Component +// / / Global Clock Mux Buffer with Output State 0 +// /___/ /\ Filename : BUFGMUX.v +// \ \ / \ Timestamp : Thu Mar 25 16:42:14 PST 2004 +// \___\/\___\ +// +// Revision: +// 03/23/04 - Initial version. + +`timescale 100 ps / 10 ps + +module BUFGMUX (O, I0, I1, S); + + output O; + + input I0, I1, S; + + reg q0, q1; + reg q0_enable, q1_enable; + + tri0 GSR = glbl.GSR; + + bufif1 B0 (O, I0, q0); + bufif1 B1 (O, I1, q1); + pulldown P1 (O); + + always @(GSR or I0 or S or q0_enable) + if (GSR) + q0 <= 1; + else if (!I0) + q0 <= !S && q0_enable; + + always @(GSR or I1 or S or q1_enable) + if (GSR) + q1 <= 0; + else if (!I1) + q1 <= S && q1_enable; + + always @(GSR or q1 or I0) + if (GSR) + q0_enable <= 1; + else if (q1) + q0_enable <= 0; + else if (I0) + q0_enable <= !q1; + + always @(GSR or q0 or I1) + if (GSR) + q1_enable <= 0; + else if (q0) + q1_enable <= 0; + else if (I1) + q1_enable <= !q0; + +endmodule diff --git a/eth/rtl/verilog/TECH/xilinx/RAMB16_S36_S36.v b/eth/rtl/verilog/TECH/xilinx/RAMB16_S36_S36.v new file mode 100644 index 000000000..80545a9b8 --- /dev/null +++ b/eth/rtl/verilog/TECH/xilinx/RAMB16_S36_S36.v @@ -0,0 +1,2204 @@ +// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/unisims/RAMB16_S36_S36.v,v 1.9 2005/03/14 22:54:41 wloo Exp $ +/////////////////////////////////////////////////////////////////////////////// +// Copyright (c) 1995/2005 Xilinx, Inc. +// All Right Reserved. +/////////////////////////////////////////////////////////////////////////////// +// ____ ____ +// / /\/ / +// /___/ \ / Vendor : Xilinx +// \ \ \/ Version : 8.1i (I.13) +// \ \ Description : Xilinx Functional Simulation Library Component +// / / 16K-Bit Data and 2K-Bit Parity Dual Port Block RAM +// /___/ /\ Filename : RAMB16_S36_S36.v +// \ \ / \ Timestamp : Thu Mar 10 16:43:36 PST 2005 +// \___\/\___\ +// +// Revision: +// 03/23/04 - Initial version. +// End Revision + +`ifdef legacy_model + +`timescale 1 ps / 1 ps + +module RAMB16_S36_S36 (DOA, DOB, DOPA, DOPB, ADDRA, ADDRB, CLKA, CLKB, DIA, DIB, DIPA, DIPB, ENA, ENB, SSRA, SSRB, WEA, WEB); + + parameter INIT_A = 36'h0; + parameter INIT_B = 36'h0; + parameter SRVAL_A = 36'h0; + parameter SRVAL_B = 36'h0; + parameter WRITE_MODE_A = "WRITE_FIRST"; + parameter WRITE_MODE_B = "WRITE_FIRST"; + parameter SIM_COLLISION_CHECK = "ALL"; + localparam SETUP_ALL = 1000; + localparam SETUP_READ_FIRST = 3000; + + parameter INIT_00 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_01 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_02 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_03 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_04 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_05 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_06 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_07 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_08 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_09 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_0A = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_0B = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_0C = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_0D = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_0E = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_0F = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_10 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_11 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_12 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_13 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_14 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_15 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_16 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_17 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_18 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_19 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_1A = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_1B = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_1C = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_1D = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_1E = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_1F = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_20 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_21 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_22 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_23 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_24 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_25 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_26 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_27 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_28 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_29 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_2A = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_2B = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_2C = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_2D = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_2E = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_2F = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_30 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_31 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_32 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_33 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_34 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_35 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_36 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_37 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_38 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_39 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_3A = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_3B = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_3C = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_3D = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_3E = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_3F = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INITP_00 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INITP_01 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INITP_02 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INITP_03 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INITP_04 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INITP_05 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INITP_06 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INITP_07 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + + output [31:0] DOA; + output [3:0] DOPA; + reg [31:0] doa_out; + reg [3:0] dopa_out; + wire doa_out0, doa_out1, doa_out2, doa_out3, doa_out4, doa_out5, doa_out6, doa_out7, doa_out8, doa_out9, doa_out10, doa_out11, doa_out12, doa_out13, doa_out14, doa_out15, doa_out16, doa_out17, doa_out18, doa_out19, doa_out20, doa_out21, doa_out22, doa_out23, doa_out24, doa_out25, doa_out26, doa_out27, doa_out28, doa_out29, doa_out30, doa_out31; + wire dopa0_out, dopa1_out, dopa2_out, dopa3_out; + + input [8:0] ADDRA; + input [31:0] DIA; + input [3:0] DIPA; + input ENA, CLKA, WEA, SSRA; + + output [31:0] DOB; + output [3:0] DOPB; + reg [31:0] dob_out; + reg [3:0] dopb_out; + wire dob_out0, dob_out1, dob_out2, dob_out3, dob_out4, dob_out5, dob_out6, dob_out7, dob_out8, dob_out9, dob_out10, dob_out11, dob_out12, dob_out13, dob_out14, dob_out15, dob_out16, dob_out17, dob_out18, dob_out19, dob_out20, dob_out21, dob_out22, dob_out23, dob_out24, dob_out25, dob_out26, dob_out27, dob_out28, dob_out29, dob_out30, dob_out31; + wire dopb0_out, dopb1_out, dopb2_out, dopb3_out; + + input [8:0] ADDRB; + input [31:0] DIB; + input [3:0] DIPB; + input ENB, CLKB, WEB, SSRB; + + reg [18431:0] mem; + reg [8:0] count; + reg [1:0] wr_mode_a, wr_mode_b; + + reg [5:0] dmi, dbi; + reg [5:0] pmi, pbi; + + wire [8:0] addra_int; + reg [8:0] addra_reg; + wire [31:0] dia_int; + wire [3:0] dipa_int; + wire ena_int, clka_int, wea_int, ssra_int; + reg ena_reg, wea_reg, ssra_reg; + wire [8:0] addrb_int; + reg [8:0] addrb_reg; + wire [31:0] dib_int; + wire [3:0] dipb_int; + wire enb_int, clkb_int, web_int, ssrb_int; + reg display_flag; + reg enb_reg, web_reg, ssrb_reg; + + time time_clka, time_clkb; + time time_clka_clkb; + time time_clkb_clka; + + reg setup_all_a_b; + reg setup_all_b_a; + reg setup_zero; + reg setup_rf_a_b; + reg setup_rf_b_a; + reg [1:0] data_collision, data_collision_a_b, data_collision_b_a; + reg memory_collision, memory_collision_a_b, memory_collision_b_a; + reg address_collision, address_collision_a_b, address_collision_b_a; + reg change_clka; + reg change_clkb; + + wire [14:0] data_addra_int; + wire [14:0] data_addra_reg; + wire [14:0] data_addrb_int; + wire [14:0] data_addrb_reg; + wire [15:0] parity_addra_int; + wire [15:0] parity_addra_reg; + wire [15:0] parity_addrb_int; + wire [15:0] parity_addrb_reg; + + tri0 GSR = glbl.GSR; + + always @(GSR) + if (GSR) begin + assign doa_out = INIT_A[31:0]; + assign dopa_out = INIT_A[35:32]; + assign dob_out = INIT_B[31:0]; + assign dopb_out = INIT_B[35:32]; + end + else begin + deassign doa_out; + deassign dopa_out; + deassign dob_out; + deassign dopb_out; + end + + buf b_doa_out0 (doa_out0, doa_out[0]); + buf b_doa_out1 (doa_out1, doa_out[1]); + buf b_doa_out2 (doa_out2, doa_out[2]); + buf b_doa_out3 (doa_out3, doa_out[3]); + buf b_doa_out4 (doa_out4, doa_out[4]); + buf b_doa_out5 (doa_out5, doa_out[5]); + buf b_doa_out6 (doa_out6, doa_out[6]); + buf b_doa_out7 (doa_out7, doa_out[7]); + buf b_doa_out8 (doa_out8, doa_out[8]); + buf b_doa_out9 (doa_out9, doa_out[9]); + buf b_doa_out10 (doa_out10, doa_out[10]); + buf b_doa_out11 (doa_out11, doa_out[11]); + buf b_doa_out12 (doa_out12, doa_out[12]); + buf b_doa_out13 (doa_out13, doa_out[13]); + buf b_doa_out14 (doa_out14, doa_out[14]); + buf b_doa_out15 (doa_out15, doa_out[15]); + buf b_doa_out16 (doa_out16, doa_out[16]); + buf b_doa_out17 (doa_out17, doa_out[17]); + buf b_doa_out18 (doa_out18, doa_out[18]); + buf b_doa_out19 (doa_out19, doa_out[19]); + buf b_doa_out20 (doa_out20, doa_out[20]); + buf b_doa_out21 (doa_out21, doa_out[21]); + buf b_doa_out22 (doa_out22, doa_out[22]); + buf b_doa_out23 (doa_out23, doa_out[23]); + buf b_doa_out24 (doa_out24, doa_out[24]); + buf b_doa_out25 (doa_out25, doa_out[25]); + buf b_doa_out26 (doa_out26, doa_out[26]); + buf b_doa_out27 (doa_out27, doa_out[27]); + buf b_doa_out28 (doa_out28, doa_out[28]); + buf b_doa_out29 (doa_out29, doa_out[29]); + buf b_doa_out30 (doa_out30, doa_out[30]); + buf b_doa_out31 (doa_out31, doa_out[31]); + buf b_dopa_out0 (dopa_out0, dopa_out[0]); + buf b_dopa_out1 (dopa_out1, dopa_out[1]); + buf b_dopa_out2 (dopa_out2, dopa_out[2]); + buf b_dopa_out3 (dopa_out3, dopa_out[3]); + buf b_dob_out0 (dob_out0, dob_out[0]); + buf b_dob_out1 (dob_out1, dob_out[1]); + buf b_dob_out2 (dob_out2, dob_out[2]); + buf b_dob_out3 (dob_out3, dob_out[3]); + buf b_dob_out4 (dob_out4, dob_out[4]); + buf b_dob_out5 (dob_out5, dob_out[5]); + buf b_dob_out6 (dob_out6, dob_out[6]); + buf b_dob_out7 (dob_out7, dob_out[7]); + buf b_dob_out8 (dob_out8, dob_out[8]); + buf b_dob_out9 (dob_out9, dob_out[9]); + buf b_dob_out10 (dob_out10, dob_out[10]); + buf b_dob_out11 (dob_out11, dob_out[11]); + buf b_dob_out12 (dob_out12, dob_out[12]); + buf b_dob_out13 (dob_out13, dob_out[13]); + buf b_dob_out14 (dob_out14, dob_out[14]); + buf b_dob_out15 (dob_out15, dob_out[15]); + buf b_dob_out16 (dob_out16, dob_out[16]); + buf b_dob_out17 (dob_out17, dob_out[17]); + buf b_dob_out18 (dob_out18, dob_out[18]); + buf b_dob_out19 (dob_out19, dob_out[19]); + buf b_dob_out20 (dob_out20, dob_out[20]); + buf b_dob_out21 (dob_out21, dob_out[21]); + buf b_dob_out22 (dob_out22, dob_out[22]); + buf b_dob_out23 (dob_out23, dob_out[23]); + buf b_dob_out24 (dob_out24, dob_out[24]); + buf b_dob_out25 (dob_out25, dob_out[25]); + buf b_dob_out26 (dob_out26, dob_out[26]); + buf b_dob_out27 (dob_out27, dob_out[27]); + buf b_dob_out28 (dob_out28, dob_out[28]); + buf b_dob_out29 (dob_out29, dob_out[29]); + buf b_dob_out30 (dob_out30, dob_out[30]); + buf b_dob_out31 (dob_out31, dob_out[31]); + buf b_dopb_out0 (dopb_out0, dopb_out[0]); + buf b_dopb_out1 (dopb_out1, dopb_out[1]); + buf b_dopb_out2 (dopb_out2, dopb_out[2]); + buf b_dopb_out3 (dopb_out3, dopb_out[3]); + + buf b_doa0 (DOA[0], doa_out0); + buf b_doa1 (DOA[1], doa_out1); + buf b_doa2 (DOA[2], doa_out2); + buf b_doa3 (DOA[3], doa_out3); + buf b_doa4 (DOA[4], doa_out4); + buf b_doa5 (DOA[5], doa_out5); + buf b_doa6 (DOA[6], doa_out6); + buf b_doa7 (DOA[7], doa_out7); + buf b_doa8 (DOA[8], doa_out8); + buf b_doa9 (DOA[9], doa_out9); + buf b_doa10 (DOA[10], doa_out10); + buf b_doa11 (DOA[11], doa_out11); + buf b_doa12 (DOA[12], doa_out12); + buf b_doa13 (DOA[13], doa_out13); + buf b_doa14 (DOA[14], doa_out14); + buf b_doa15 (DOA[15], doa_out15); + buf b_doa16 (DOA[16], doa_out16); + buf b_doa17 (DOA[17], doa_out17); + buf b_doa18 (DOA[18], doa_out18); + buf b_doa19 (DOA[19], doa_out19); + buf b_doa20 (DOA[20], doa_out20); + buf b_doa21 (DOA[21], doa_out21); + buf b_doa22 (DOA[22], doa_out22); + buf b_doa23 (DOA[23], doa_out23); + buf b_doa24 (DOA[24], doa_out24); + buf b_doa25 (DOA[25], doa_out25); + buf b_doa26 (DOA[26], doa_out26); + buf b_doa27 (DOA[27], doa_out27); + buf b_doa28 (DOA[28], doa_out28); + buf b_doa29 (DOA[29], doa_out29); + buf b_doa30 (DOA[30], doa_out30); + buf b_doa31 (DOA[31], doa_out31); + buf b_dopa0 (DOPA[0], dopa_out0); + buf b_dopa1 (DOPA[1], dopa_out1); + buf b_dopa2 (DOPA[2], dopa_out2); + buf b_dopa3 (DOPA[3], dopa_out3); + buf b_dob0 (DOB[0], dob_out0); + buf b_dob1 (DOB[1], dob_out1); + buf b_dob2 (DOB[2], dob_out2); + buf b_dob3 (DOB[3], dob_out3); + buf b_dob4 (DOB[4], dob_out4); + buf b_dob5 (DOB[5], dob_out5); + buf b_dob6 (DOB[6], dob_out6); + buf b_dob7 (DOB[7], dob_out7); + buf b_dob8 (DOB[8], dob_out8); + buf b_dob9 (DOB[9], dob_out9); + buf b_dob10 (DOB[10], dob_out10); + buf b_dob11 (DOB[11], dob_out11); + buf b_dob12 (DOB[12], dob_out12); + buf b_dob13 (DOB[13], dob_out13); + buf b_dob14 (DOB[14], dob_out14); + buf b_dob15 (DOB[15], dob_out15); + buf b_dob16 (DOB[16], dob_out16); + buf b_dob17 (DOB[17], dob_out17); + buf b_dob18 (DOB[18], dob_out18); + buf b_dob19 (DOB[19], dob_out19); + buf b_dob20 (DOB[20], dob_out20); + buf b_dob21 (DOB[21], dob_out21); + buf b_dob22 (DOB[22], dob_out22); + buf b_dob23 (DOB[23], dob_out23); + buf b_dob24 (DOB[24], dob_out24); + buf b_dob25 (DOB[25], dob_out25); + buf b_dob26 (DOB[26], dob_out26); + buf b_dob27 (DOB[27], dob_out27); + buf b_dob28 (DOB[28], dob_out28); + buf b_dob29 (DOB[29], dob_out29); + buf b_dob30 (DOB[30], dob_out30); + buf b_dob31 (DOB[31], dob_out31); + buf b_dopb0 (DOPB[0], dopb_out0); + buf b_dopb1 (DOPB[1], dopb_out1); + buf b_dopb2 (DOPB[2], dopb_out2); + buf b_dopb3 (DOPB[3], dopb_out3); + + buf b_addra_0 (addra_int[0], ADDRA[0]); + buf b_addra_1 (addra_int[1], ADDRA[1]); + buf b_addra_2 (addra_int[2], ADDRA[2]); + buf b_addra_3 (addra_int[3], ADDRA[3]); + buf b_addra_4 (addra_int[4], ADDRA[4]); + buf b_addra_5 (addra_int[5], ADDRA[5]); + buf b_addra_6 (addra_int[6], ADDRA[6]); + buf b_addra_7 (addra_int[7], ADDRA[7]); + buf b_addra_8 (addra_int[8], ADDRA[8]); + buf b_dia_0 (dia_int[0], DIA[0]); + buf b_dia_1 (dia_int[1], DIA[1]); + buf b_dia_2 (dia_int[2], DIA[2]); + buf b_dia_3 (dia_int[3], DIA[3]); + buf b_dia_4 (dia_int[4], DIA[4]); + buf b_dia_5 (dia_int[5], DIA[5]); + buf b_dia_6 (dia_int[6], DIA[6]); + buf b_dia_7 (dia_int[7], DIA[7]); + buf b_dia_8 (dia_int[8], DIA[8]); + buf b_dia_9 (dia_int[9], DIA[9]); + buf b_dia_10 (dia_int[10], DIA[10]); + buf b_dia_11 (dia_int[11], DIA[11]); + buf b_dia_12 (dia_int[12], DIA[12]); + buf b_dia_13 (dia_int[13], DIA[13]); + buf b_dia_14 (dia_int[14], DIA[14]); + buf b_dia_15 (dia_int[15], DIA[15]); + buf b_dia_16 (dia_int[16], DIA[16]); + buf b_dia_17 (dia_int[17], DIA[17]); + buf b_dia_18 (dia_int[18], DIA[18]); + buf b_dia_19 (dia_int[19], DIA[19]); + buf b_dia_20 (dia_int[20], DIA[20]); + buf b_dia_21 (dia_int[21], DIA[21]); + buf b_dia_22 (dia_int[22], DIA[22]); + buf b_dia_23 (dia_int[23], DIA[23]); + buf b_dia_24 (dia_int[24], DIA[24]); + buf b_dia_25 (dia_int[25], DIA[25]); + buf b_dia_26 (dia_int[26], DIA[26]); + buf b_dia_27 (dia_int[27], DIA[27]); + buf b_dia_28 (dia_int[28], DIA[28]); + buf b_dia_29 (dia_int[29], DIA[29]); + buf b_dia_30 (dia_int[30], DIA[30]); + buf b_dia_31 (dia_int[31], DIA[31]); + buf b_dipa_0 (dipa_int[0], DIPA[0]); + buf b_dipa_1 (dipa_int[1], DIPA[1]); + buf b_dipa_2 (dipa_int[2], DIPA[2]); + buf b_dipa_3 (dipa_int[3], DIPA[3]); + buf b_ena (ena_int, ENA); + buf b_clka (clka_int, CLKA); + buf b_ssra (ssra_int, SSRA); + buf b_wea (wea_int, WEA); + buf b_addrb_0 (addrb_int[0], ADDRB[0]); + buf b_addrb_1 (addrb_int[1], ADDRB[1]); + buf b_addrb_2 (addrb_int[2], ADDRB[2]); + buf b_addrb_3 (addrb_int[3], ADDRB[3]); + buf b_addrb_4 (addrb_int[4], ADDRB[4]); + buf b_addrb_5 (addrb_int[5], ADDRB[5]); + buf b_addrb_6 (addrb_int[6], ADDRB[6]); + buf b_addrb_7 (addrb_int[7], ADDRB[7]); + buf b_addrb_8 (addrb_int[8], ADDRB[8]); + buf b_dib_0 (dib_int[0], DIB[0]); + buf b_dib_1 (dib_int[1], DIB[1]); + buf b_dib_2 (dib_int[2], DIB[2]); + buf b_dib_3 (dib_int[3], DIB[3]); + buf b_dib_4 (dib_int[4], DIB[4]); + buf b_dib_5 (dib_int[5], DIB[5]); + buf b_dib_6 (dib_int[6], DIB[6]); + buf b_dib_7 (dib_int[7], DIB[7]); + buf b_dib_8 (dib_int[8], DIB[8]); + buf b_dib_9 (dib_int[9], DIB[9]); + buf b_dib_10 (dib_int[10], DIB[10]); + buf b_dib_11 (dib_int[11], DIB[11]); + buf b_dib_12 (dib_int[12], DIB[12]); + buf b_dib_13 (dib_int[13], DIB[13]); + buf b_dib_14 (dib_int[14], DIB[14]); + buf b_dib_15 (dib_int[15], DIB[15]); + buf b_dib_16 (dib_int[16], DIB[16]); + buf b_dib_17 (dib_int[17], DIB[17]); + buf b_dib_18 (dib_int[18], DIB[18]); + buf b_dib_19 (dib_int[19], DIB[19]); + buf b_dib_20 (dib_int[20], DIB[20]); + buf b_dib_21 (dib_int[21], DIB[21]); + buf b_dib_22 (dib_int[22], DIB[22]); + buf b_dib_23 (dib_int[23], DIB[23]); + buf b_dib_24 (dib_int[24], DIB[24]); + buf b_dib_25 (dib_int[25], DIB[25]); + buf b_dib_26 (dib_int[26], DIB[26]); + buf b_dib_27 (dib_int[27], DIB[27]); + buf b_dib_28 (dib_int[28], DIB[28]); + buf b_dib_29 (dib_int[29], DIB[29]); + buf b_dib_30 (dib_int[30], DIB[30]); + buf b_dib_31 (dib_int[31], DIB[31]); + buf b_dipb_0 (dipb_int[0], DIPB[0]); + buf b_dipb_1 (dipb_int[1], DIPB[1]); + buf b_dipb_2 (dipb_int[2], DIPB[2]); + buf b_dipb_3 (dipb_int[3], DIPB[3]); + buf b_enb (enb_int, ENB); + buf b_clkb (clkb_int, CLKB); + buf b_ssrb (ssrb_int, SSRB); + buf b_web (web_int, WEB); + + initial begin + for (count = 0; count < 256; count = count + 1) begin + mem[count] <= INIT_00[count]; + mem[256 * 1 + count] <= INIT_01[count]; + mem[256 * 2 + count] <= INIT_02[count]; + mem[256 * 3 + count] <= INIT_03[count]; + mem[256 * 4 + count] <= INIT_04[count]; + mem[256 * 5 + count] <= INIT_05[count]; + mem[256 * 6 + count] <= INIT_06[count]; + mem[256 * 7 + count] <= INIT_07[count]; + mem[256 * 8 + count] <= INIT_08[count]; + mem[256 * 9 + count] <= INIT_09[count]; + mem[256 * 10 + count] <= INIT_0A[count]; + mem[256 * 11 + count] <= INIT_0B[count]; + mem[256 * 12 + count] <= INIT_0C[count]; + mem[256 * 13 + count] <= INIT_0D[count]; + mem[256 * 14 + count] <= INIT_0E[count]; + mem[256 * 15 + count] <= INIT_0F[count]; + mem[256 * 16 + count] <= INIT_10[count]; + mem[256 * 17 + count] <= INIT_11[count]; + mem[256 * 18 + count] <= INIT_12[count]; + mem[256 * 19 + count] <= INIT_13[count]; + mem[256 * 20 + count] <= INIT_14[count]; + mem[256 * 21 + count] <= INIT_15[count]; + mem[256 * 22 + count] <= INIT_16[count]; + mem[256 * 23 + count] <= INIT_17[count]; + mem[256 * 24 + count] <= INIT_18[count]; + mem[256 * 25 + count] <= INIT_19[count]; + mem[256 * 26 + count] <= INIT_1A[count]; + mem[256 * 27 + count] <= INIT_1B[count]; + mem[256 * 28 + count] <= INIT_1C[count]; + mem[256 * 29 + count] <= INIT_1D[count]; + mem[256 * 30 + count] <= INIT_1E[count]; + mem[256 * 31 + count] <= INIT_1F[count]; + mem[256 * 32 + count] <= INIT_20[count]; + mem[256 * 33 + count] <= INIT_21[count]; + mem[256 * 34 + count] <= INIT_22[count]; + mem[256 * 35 + count] <= INIT_23[count]; + mem[256 * 36 + count] <= INIT_24[count]; + mem[256 * 37 + count] <= INIT_25[count]; + mem[256 * 38 + count] <= INIT_26[count]; + mem[256 * 39 + count] <= INIT_27[count]; + mem[256 * 40 + count] <= INIT_28[count]; + mem[256 * 41 + count] <= INIT_29[count]; + mem[256 * 42 + count] <= INIT_2A[count]; + mem[256 * 43 + count] <= INIT_2B[count]; + mem[256 * 44 + count] <= INIT_2C[count]; + mem[256 * 45 + count] <= INIT_2D[count]; + mem[256 * 46 + count] <= INIT_2E[count]; + mem[256 * 47 + count] <= INIT_2F[count]; + mem[256 * 48 + count] <= INIT_30[count]; + mem[256 * 49 + count] <= INIT_31[count]; + mem[256 * 50 + count] <= INIT_32[count]; + mem[256 * 51 + count] <= INIT_33[count]; + mem[256 * 52 + count] <= INIT_34[count]; + mem[256 * 53 + count] <= INIT_35[count]; + mem[256 * 54 + count] <= INIT_36[count]; + mem[256 * 55 + count] <= INIT_37[count]; + mem[256 * 56 + count] <= INIT_38[count]; + mem[256 * 57 + count] <= INIT_39[count]; + mem[256 * 58 + count] <= INIT_3A[count]; + mem[256 * 59 + count] <= INIT_3B[count]; + mem[256 * 60 + count] <= INIT_3C[count]; + mem[256 * 61 + count] <= INIT_3D[count]; + mem[256 * 62 + count] <= INIT_3E[count]; + mem[256 * 63 + count] <= INIT_3F[count]; + mem[256 * 64 + count] <= INITP_00[count]; + mem[256 * 65 + count] <= INITP_01[count]; + mem[256 * 66 + count] <= INITP_02[count]; + mem[256 * 67 + count] <= INITP_03[count]; + mem[256 * 68 + count] <= INITP_04[count]; + mem[256 * 69 + count] <= INITP_05[count]; + mem[256 * 70 + count] <= INITP_06[count]; + mem[256 * 71 + count] <= INITP_07[count]; + end + address_collision <= 0; + address_collision_a_b <= 0; + address_collision_b_a <= 0; + change_clka <= 0; + change_clkb <= 0; + data_collision <= 0; + data_collision_a_b <= 0; + data_collision_b_a <= 0; + memory_collision <= 0; + memory_collision_a_b <= 0; + memory_collision_b_a <= 0; + setup_all_a_b <= 0; + setup_all_b_a <= 0; + setup_zero <= 0; + setup_rf_a_b <= 0; + setup_rf_b_a <= 0; + end + + assign data_addra_int = addra_int * 32; + assign data_addra_reg = addra_reg * 32; + assign data_addrb_int = addrb_int * 32; + assign data_addrb_reg = addrb_reg * 32; + assign parity_addra_int = 16384 + addra_int * 4; + assign parity_addra_reg = 16384 + addra_reg * 4; + assign parity_addrb_int = 16384 + addrb_int * 4; + assign parity_addrb_reg = 16384 + addrb_reg * 4; + + + initial begin + + display_flag = 1; + + case (SIM_COLLISION_CHECK) + + "NONE" : begin + assign setup_all_a_b = 1'b0; + assign setup_all_b_a = 1'b0; + assign setup_zero = 1'b0; + assign setup_rf_a_b = 1'b0; + assign setup_rf_b_a = 1'b0; + assign display_flag = 0; + end + "WARNING_ONLY" : begin + assign data_collision = 2'b00; + assign data_collision_a_b = 2'b00; + assign data_collision_b_a = 2'b00; + assign memory_collision = 1'b0; + assign memory_collision_a_b = 1'b0; + assign memory_collision_b_a = 1'b0; + end + "GENERATE_X_ONLY" : begin + assign display_flag = 0; + end + "ALL" : ; + default : begin + $display("Attribute Syntax Error : The Attribute SIM_COLLISION_CHECK on RAMB16_S36_S36 instance %m is set to %s. Legal values for this attribute are ALL, NONE, WARNING_ONLY or GENERATE_X_ONLY.", SIM_COLLISION_CHECK); + $finish; + end + + endcase // case(SIM_COLLISION_CHECK) + + end // initial begin + + + always @(posedge clka_int) begin + time_clka = $time; + #0 time_clkb_clka = time_clka - time_clkb; + change_clka = ~change_clka; + end + + always @(posedge clkb_int) begin + time_clkb = $time; + #0 time_clka_clkb = time_clkb - time_clka; + change_clkb = ~change_clkb; + end + + always @(change_clkb) begin + if ((0 < time_clka_clkb) && (time_clka_clkb < SETUP_ALL)) + setup_all_a_b = 1; + if ((0 < time_clka_clkb) && (time_clka_clkb < SETUP_READ_FIRST)) + setup_rf_a_b = 1; + end + + always @(change_clka) begin + if ((0 < time_clkb_clka) && (time_clkb_clka < SETUP_ALL)) + setup_all_b_a = 1; + if ((0 < time_clkb_clka) && (time_clkb_clka < SETUP_READ_FIRST)) + setup_rf_b_a = 1; + end + + always @(change_clkb or change_clka) begin + if ((time_clkb_clka == 0) && (time_clka_clkb == 0)) + setup_zero = 1; + end + + always @(posedge setup_zero) begin + if ((ena_int == 1) && (wea_int == 1) && + (enb_int == 1) && (web_int == 1) && + (data_addra_int[14:5] == data_addrb_int[14:5])) + memory_collision <= 1; + end + + always @(posedge setup_all_a_b or posedge setup_rf_a_b) begin + if ((ena_reg == 1) && (wea_reg == 1) && + (enb_int == 1) && (web_int == 1) && + (data_addra_reg[14:5] == data_addrb_int[14:5])) + memory_collision_a_b <= 1; + end + + always @(posedge setup_all_b_a or posedge setup_rf_b_a) begin + if ((ena_int == 1) && (wea_int == 1) && + (enb_reg == 1) && (web_reg == 1) && + (data_addra_int[14:5] == data_addrb_reg[14:5])) + memory_collision_b_a <= 1; + end + + always @(posedge setup_all_a_b) begin + if (data_addra_reg[14:5] == data_addrb_int[14:5]) begin + if ((ena_reg == 1) && (enb_int == 1)) begin + case ({wr_mode_a, wr_mode_b, wea_reg, web_int}) + 6'b000011 : begin data_collision_a_b <= 2'b11; display_wa_wb; end + 6'b000111 : begin data_collision_a_b <= 2'b11; display_wa_wb; end + 6'b001011 : begin data_collision_a_b <= 2'b10; display_wa_wb; end +// 6'b010011 : begin data_collision_a_b <= 2'b00; display_wa_wb; end +// 6'b010111 : begin data_collision_a_b <= 2'b00; display_wa_wb; end +// 6'b011011 : begin data_collision_a_b <= 2'b00; display_wa_wb; end + 6'b100011 : begin data_collision_a_b <= 2'b01; display_wa_wb; end + 6'b100111 : begin data_collision_a_b <= 2'b01; display_wa_wb; end + 6'b101011 : begin display_wa_wb; end + 6'b000001 : begin data_collision_a_b <= 2'b10; display_ra_wb; end +// 6'b000101 : begin data_collision_a_b <= 2'b00; display_ra_wb; end + 6'b001001 : begin data_collision_a_b <= 2'b10; display_ra_wb; end + 6'b010001 : begin data_collision_a_b <= 2'b10; display_ra_wb; end +// 6'b010101 : begin data_collision_a_b <= 2'b00; display_ra_wb; end + 6'b011001 : begin data_collision_a_b <= 2'b10; display_ra_wb; end + 6'b100001 : begin data_collision_a_b <= 2'b10; display_ra_wb; end +// 6'b100101 : begin data_collision_a_b <= 2'b00; display_ra_wb; end + 6'b101001 : begin data_collision_a_b <= 2'b10; display_ra_wb; end + 6'b000010 : begin data_collision_a_b <= 2'b01; display_wa_rb; end + 6'b000110 : begin data_collision_a_b <= 2'b01; display_wa_rb; end + 6'b001010 : begin data_collision_a_b <= 2'b01; display_wa_rb; end +// 6'b010010 : begin data_collision_a_b <= 2'b00; display_wa_rb; end +// 6'b010110 : begin data_collision_a_b <= 2'b00; display_wa_rb; end +// 6'b011010 : begin data_collision_a_b <= 2'b00; display_wa_rb; end + 6'b100010 : begin data_collision_a_b <= 2'b01; display_wa_rb; end + 6'b100110 : begin data_collision_a_b <= 2'b01; display_wa_rb; end + 6'b101010 : begin data_collision_a_b <= 2'b01; display_wa_rb; end + endcase + end + end + setup_all_a_b <= 0; + end + + + always @(posedge setup_all_b_a) begin + if (data_addra_int[14:5] == data_addrb_reg[14:5]) begin + if ((ena_int == 1) && (enb_reg == 1)) begin + case ({wr_mode_a, wr_mode_b, wea_int, web_reg}) + 6'b000011 : begin data_collision_b_a <= 2'b11; display_wa_wb; end +// 6'b000111 : begin data_collision_b_a <= 2'b00; display_wa_wb; end + 6'b001011 : begin data_collision_b_a <= 2'b10; display_wa_wb; end + 6'b010011 : begin data_collision_b_a <= 2'b11; display_wa_wb; end +// 6'b010111 : begin data_collision_b_a <= 2'b00; display_wa_wb; end + 6'b011011 : begin data_collision_b_a <= 2'b10; display_wa_wb; end + 6'b100011 : begin data_collision_b_a <= 2'b01; display_wa_wb; end + 6'b100111 : begin data_collision_b_a <= 2'b01; display_wa_wb; end + 6'b101011 : begin display_wa_wb; end + 6'b000001 : begin data_collision_b_a <= 2'b10; display_ra_wb; end + 6'b000101 : begin data_collision_b_a <= 2'b10; display_ra_wb; end + 6'b001001 : begin data_collision_b_a <= 2'b10; display_ra_wb; end + 6'b010001 : begin data_collision_b_a <= 2'b10; display_ra_wb; end + 6'b010101 : begin data_collision_b_a <= 2'b10; display_ra_wb; end + 6'b011001 : begin data_collision_b_a <= 2'b10; display_ra_wb; end + 6'b100001 : begin data_collision_b_a <= 2'b10; display_ra_wb; end + 6'b100101 : begin data_collision_b_a <= 2'b10; display_ra_wb; end + 6'b101001 : begin data_collision_b_a <= 2'b10; display_ra_wb; end + 6'b000010 : begin data_collision_b_a <= 2'b01; display_wa_rb; end + 6'b000110 : begin data_collision_b_a <= 2'b01; display_wa_rb; end + 6'b001010 : begin data_collision_b_a <= 2'b01; display_wa_rb; end +// 6'b010010 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b010110 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b011010 : begin data_collision_b_a <= 2'b00; display_wa_rb; end + 6'b100010 : begin data_collision_b_a <= 2'b01; display_wa_rb; end + 6'b100110 : begin data_collision_b_a <= 2'b01; display_wa_rb; end + 6'b101010 : begin data_collision_b_a <= 2'b01; display_wa_rb; end + endcase + end + end + setup_all_b_a <= 0; + end + + + always @(posedge setup_zero) begin + if (data_addra_int[14:5] == data_addrb_int[14:5]) begin + if ((ena_int == 1) && (enb_int == 1)) begin + case ({wr_mode_a, wr_mode_b, wea_int, web_int}) + 6'b000011 : begin data_collision <= 2'b11; display_wa_wb; end + 6'b000111 : begin data_collision <= 2'b11; display_wa_wb; end + 6'b001011 : begin data_collision <= 2'b10; display_wa_wb; end + 6'b010011 : begin data_collision <= 2'b11; display_wa_wb; end + 6'b010111 : begin data_collision <= 2'b11; display_wa_wb; end + 6'b011011 : begin data_collision <= 2'b10; display_wa_wb; end + 6'b100011 : begin data_collision <= 2'b01; display_wa_wb; end + 6'b100111 : begin data_collision <= 2'b01; display_wa_wb; end + 6'b101011 : begin display_wa_wb; end + 6'b000001 : begin data_collision <= 2'b10; display_ra_wb; end +// 6'b000101 : begin data_collision <= 2'b00; display_ra_wb; end + 6'b001001 : begin data_collision <= 2'b10; display_ra_wb; end + 6'b010001 : begin data_collision <= 2'b10; display_ra_wb; end +// 6'b010101 : begin data_collision <= 2'b00; display_ra_wb; end + 6'b011001 : begin data_collision <= 2'b10; display_ra_wb; end + 6'b100001 : begin data_collision <= 2'b10; display_ra_wb; end +// 6'b100101 : begin data_collision <= 2'b00; display_ra_wb; end + 6'b101001 : begin data_collision <= 2'b10; display_ra_wb; end + 6'b000010 : begin data_collision <= 2'b01; display_wa_rb; end + 6'b000110 : begin data_collision <= 2'b01; display_wa_rb; end + 6'b001010 : begin data_collision <= 2'b01; display_wa_rb; end +// 6'b010010 : begin data_collision <= 2'b00; display_wa_rb; end +// 6'b010110 : begin data_collision <= 2'b00; display_wa_rb; end +// 6'b011010 : begin data_collision <= 2'b00; display_wa_rb; end + 6'b100010 : begin data_collision <= 2'b01; display_wa_rb; end + 6'b100110 : begin data_collision <= 2'b01; display_wa_rb; end + 6'b101010 : begin data_collision <= 2'b01; display_wa_rb; end + endcase + end + end + setup_zero <= 0; + end + + task display_ra_wb; + begin + if (display_flag) + $display("Memory Collision Error on RAMB16_S36_S36:%m at simulation time %.3f ns\nA read was performed on address %h (hex) of Port A while a write was requested to the same address on Port B. The write will be successful however the read value on Port A is unknown until the next CLKA cycle.", $time/1000.0, addra_int); + end + endtask + + task display_wa_rb; + begin + if (display_flag) + $display("Memory Collision Error on RAMB16_S36_S36:%m at simulation time %.3f ns\nA read was performed on address %h (hex) of Port B while a write was requested to the same address on Port A. The write will be successful however the read value on Port B is unknown until the next CLKB cycle.", $time/1000.0, addrb_int); + end + endtask + + task display_wa_wb; + begin + if (display_flag) + $display("Memory Collision Error on RAMB16_S36_S36:%m at simulation time %.3f ns\nA write was requested to the same address simultaneously at both Port A and Port B of the RAM. The contents written to the RAM at address location %h (hex) of Port A and address location %h (hex) of Port B are unknown.", $time/1000.0, addra_int, addrb_int); + end + endtask + + + always @(posedge setup_rf_a_b) begin + if (data_addra_reg[14:5] == data_addrb_int[14:5]) begin + if ((ena_reg == 1) && (enb_int == 1)) begin + case ({wr_mode_a, wr_mode_b, wea_reg, web_int}) +// 6'b000011 : begin data_collision_a_b <= 2'b00; display_wa_wb; end +// 6'b000111 : begin data_collision_a_b <= 2'b00; display_wa_wb; end +// 6'b001011 : begin data_collision_a_b <= 2'b00; display_wa_wb; end + 6'b010011 : begin data_collision_a_b <= 2'b11; display_wa_wb; end + 6'b010111 : begin data_collision_a_b <= 2'b11; display_wa_wb; end + 6'b011011 : begin data_collision_a_b <= 2'b10; display_wa_wb; end +// 6'b100011 : begin data_collision_a_b <= 2'b00; display_wa_wb; end +// 6'b100111 : begin data_collision_a_b <= 2'b00; display_wa_wb; end +// 6'b101011 : begin data_collision_a_b <= 2'b00; display_wa_wb; end +// 6'b000001 : begin data_collision_a_b <= 2'b00; display_ra_wb; end +// 6'b000101 : begin data_collision_a_b <= 2'b00; display_ra_wb; end +// 6'b001001 : begin data_collision_a_b <= 2'b00; display_ra_wb; end +// 6'b010001 : begin data_collision_a_b <= 2'b00; display_ra_wb; end +// 6'b010101 : begin data_collision_a_b <= 2'b00; display_ra_wb; end +// 6'b011001 : begin data_collision_a_b <= 2'b00; display_ra_wb; end +// 6'b100001 : begin data_collision_a_b <= 2'b00; display_ra_wb; end +// 6'b100101 : begin data_collision_a_b <= 2'b00; display_ra_wb; end +// 6'b101001 : begin data_collision_a_b <= 2'b00; display_ra_wb; end +// 6'b000010 : begin data_collision_a_b <= 2'b00; display_wa_rb; end +// 6'b000110 : begin data_collision_a_b <= 2'b00; display_wa_rb; end +// 6'b001010 : begin data_collision_a_b <= 2'b00; display_wa_rb; end + 6'b010010 : begin data_collision_a_b <= 2'b01; display_wa_rb; end + 6'b010110 : begin data_collision_a_b <= 2'b01; display_wa_rb; end + 6'b011010 : begin data_collision_a_b <= 2'b01; display_wa_rb; end +// 6'b100010 : begin data_collision_a_b <= 2'b00; display_wa_rb; end +// 6'b100110 : begin data_collision_a_b <= 2'b00; display_wa_rb; end +// 6'b101010 : begin data_collision_a_b <= 2'b00; display_wa_rb; end + endcase + end + end + setup_rf_a_b <= 0; + end + + + always @(posedge setup_rf_b_a) begin + if (data_addra_int[14:5] == data_addrb_reg[14:5]) begin + if ((ena_int == 1) && (enb_reg == 1)) begin + case ({wr_mode_a, wr_mode_b, wea_int, web_reg}) +// 6'b000011 : begin data_collision_b_a <= 2'b00; display_wa_wb; end + 6'b000111 : begin data_collision_b_a <= 2'b11; display_wa_wb; end +// 6'b001011 : begin data_collision_b_a <= 2'b00; display_wa_wb; end +// 6'b010011 : begin data_collision_b_a <= 2'b00; display_wa_wb; end + 6'b010111 : begin data_collision_b_a <= 2'b11; display_wa_wb; end +// 6'b011011 : begin data_collision_b_a <= 2'b00; display_wa_wb; end +// 6'b100011 : begin data_collision_b_a <= 2'b00; display_wa_wb; end + 6'b100111 : begin data_collision_b_a <= 2'b01; display_wa_wb; end +// 6'b101011 : begin data_collision_b_a <= 2'b00; display_wa_wb; end +// 6'b000001 : begin data_collision_b_a <= 2'b00; display_ra_wb; end + 6'b000101 : begin data_collision_b_a <= 2'b10; display_ra_wb; end +// 6'b001001 : begin data_collision_b_a <= 2'b00; display_ra_wb; end +// 6'b010001 : begin data_collision_b_a <= 2'b00; display_ra_wb; end + 6'b010101 : begin data_collision_b_a <= 2'b10; display_ra_wb; end +// 6'b011001 : begin data_collision_b_a <= 2'b00; display_ra_wb; end +// 6'b100001 : begin data_collision_b_a <= 2'b00; display_ra_wb; end + 6'b100101 : begin data_collision_b_a <= 2'b10; display_ra_wb; end +// 6'b101001 : begin data_collision_b_a <= 2'b00; display_ra_wb; end +// 6'b000010 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b000110 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b001010 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b010010 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b010110 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b011010 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b100010 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b100110 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b101010 : begin data_collision_b_a <= 2'b00; display_wa_rb; end + endcase + end + end + setup_rf_b_a <= 0; + end + + + always @(posedge clka_int) begin + addra_reg <= addra_int; + ena_reg <= ena_int; + ssra_reg <= ssra_int; + wea_reg <= wea_int; + end + + always @(posedge clkb_int) begin + addrb_reg <= addrb_int; + enb_reg <= enb_int; + ssrb_reg <= ssrb_int; + web_reg <= web_int; + end + + // Data + always @(posedge memory_collision) begin + for (dmi = 0; dmi < 32; dmi = dmi + 1) begin + mem[data_addra_int + dmi] <= 1'bX; + end + memory_collision <= 0; + end + + always @(posedge memory_collision_a_b) begin + for (dmi = 0; dmi < 32; dmi = dmi + 1) begin + mem[data_addra_reg + dmi] <= 1'bX; + end + memory_collision_a_b <= 0; + end + + always @(posedge memory_collision_b_a) begin + for (dmi = 0; dmi < 32; dmi = dmi + 1) begin + mem[data_addra_int + dmi] <= 1'bX; + end + memory_collision_b_a <= 0; + end + + always @(posedge data_collision[1]) begin + if (ssra_int == 0) begin + doa_out <= 32'bX; + end + data_collision[1] <= 0; + end + + always @(posedge data_collision[0]) begin + if (ssrb_int == 0) begin + dob_out <= 32'bX; + end + data_collision[0] <= 0; + end + + always @(posedge data_collision_a_b[1]) begin + if (ssra_reg == 0) begin + doa_out <= 32'bX; + end + data_collision_a_b[1] <= 0; + end + + always @(posedge data_collision_a_b[0]) begin + if (ssrb_int == 0) begin + dob_out <= 32'bX; + end + data_collision_a_b[0] <= 0; + end + + always @(posedge data_collision_b_a[1]) begin + if (ssra_int == 0) begin + doa_out <= 32'bX; + end + data_collision_b_a[1] <= 0; + end + + always @(posedge data_collision_b_a[0]) begin + if (ssrb_reg == 0) begin + dob_out <= 32'bX; + end + data_collision_b_a[0] <= 0; + end + + + // Parity + always @(posedge memory_collision) begin + for (pmi = 0; pmi < 4; pmi = pmi + 1) begin + mem[parity_addra_int + pmi] <= 1'bX; + end + end + + always @(posedge memory_collision_a_b) begin + for (pmi = 0; pmi < 4; pmi = pmi + 1) begin + mem[parity_addra_reg + pmi] <= 1'bX; + end + end + + always @(posedge memory_collision_b_a) begin + for (pmi = 0; pmi < 4; pmi = pmi + 1) begin + mem[parity_addra_int + pmi] <= 1'bX; + end + end + + always @(posedge data_collision[1]) begin + if (ssra_int == 0) begin + dopa_out <= 4'bX; + end + end + + always @(posedge data_collision[0]) begin + if (ssrb_int == 0) begin + dopb_out <= 4'bX; + end + end + + always @(posedge data_collision_a_b[1]) begin + if (ssra_reg == 0) begin + dopa_out <= 4'bX; + end + end + + always @(posedge data_collision_a_b[0]) begin + if (ssrb_int == 0) begin + dopb_out <= 4'bX; + end + end + + always @(posedge data_collision_b_a[1]) begin + if (ssra_int == 0) begin + dopa_out <= 4'bX; + end + end + + always @(posedge data_collision_b_a[0]) begin + if (ssrb_reg == 0) begin + dopb_out <= 4'bX; + end + end + + + initial begin + case (WRITE_MODE_A) + "WRITE_FIRST" : wr_mode_a <= 2'b00; + "READ_FIRST" : wr_mode_a <= 2'b01; + "NO_CHANGE" : wr_mode_a <= 2'b10; + default : begin + $display("Attribute Syntax Error : The Attribute WRITE_MODE_A on RAMB16_S36_S36 instance %m is set to %s. Legal values for this attribute are WRITE_FIRST, READ_FIRST or NO_CHANGE.", WRITE_MODE_A); + $finish; + end + endcase + end + + initial begin + case (WRITE_MODE_B) + "WRITE_FIRST" : wr_mode_b <= 2'b00; + "READ_FIRST" : wr_mode_b <= 2'b01; + "NO_CHANGE" : wr_mode_b <= 2'b10; + default : begin + $display("Attribute Syntax Error : The Attribute WRITE_MODE_B on RAMB16_S36_S36 instance %m is set to %s. Legal values for this attribute are WRITE_FIRST, READ_FIRST or NO_CHANGE.", WRITE_MODE_B); + $finish; + end + endcase + end + + // Port A + always @(posedge clka_int) begin + if (ena_int == 1'b1) begin + if (ssra_int == 1'b1) begin + doa_out[0] <= SRVAL_A[0]; + doa_out[1] <= SRVAL_A[1]; + doa_out[2] <= SRVAL_A[2]; + doa_out[3] <= SRVAL_A[3]; + doa_out[4] <= SRVAL_A[4]; + doa_out[5] <= SRVAL_A[5]; + doa_out[6] <= SRVAL_A[6]; + doa_out[7] <= SRVAL_A[7]; + doa_out[8] <= SRVAL_A[8]; + doa_out[9] <= SRVAL_A[9]; + doa_out[10] <= SRVAL_A[10]; + doa_out[11] <= SRVAL_A[11]; + doa_out[12] <= SRVAL_A[12]; + doa_out[13] <= SRVAL_A[13]; + doa_out[14] <= SRVAL_A[14]; + doa_out[15] <= SRVAL_A[15]; + doa_out[16] <= SRVAL_A[16]; + doa_out[17] <= SRVAL_A[17]; + doa_out[18] <= SRVAL_A[18]; + doa_out[19] <= SRVAL_A[19]; + doa_out[20] <= SRVAL_A[20]; + doa_out[21] <= SRVAL_A[21]; + doa_out[22] <= SRVAL_A[22]; + doa_out[23] <= SRVAL_A[23]; + doa_out[24] <= SRVAL_A[24]; + doa_out[25] <= SRVAL_A[25]; + doa_out[26] <= SRVAL_A[26]; + doa_out[27] <= SRVAL_A[27]; + doa_out[28] <= SRVAL_A[28]; + doa_out[29] <= SRVAL_A[29]; + doa_out[30] <= SRVAL_A[30]; + doa_out[31] <= SRVAL_A[31]; + dopa_out[0] <= SRVAL_A[32]; + dopa_out[1] <= SRVAL_A[33]; + dopa_out[2] <= SRVAL_A[34]; + dopa_out[3] <= SRVAL_A[35]; + end + else begin + if (wea_int == 1'b1) begin + if (wr_mode_a == 2'b00) begin + doa_out <= dia_int; + dopa_out <= dipa_int; + end + else if (wr_mode_a == 2'b01) begin + doa_out[0] <= mem[data_addra_int + 0]; + doa_out[1] <= mem[data_addra_int + 1]; + doa_out[2] <= mem[data_addra_int + 2]; + doa_out[3] <= mem[data_addra_int + 3]; + doa_out[4] <= mem[data_addra_int + 4]; + doa_out[5] <= mem[data_addra_int + 5]; + doa_out[6] <= mem[data_addra_int + 6]; + doa_out[7] <= mem[data_addra_int + 7]; + doa_out[8] <= mem[data_addra_int + 8]; + doa_out[9] <= mem[data_addra_int + 9]; + doa_out[10] <= mem[data_addra_int + 10]; + doa_out[11] <= mem[data_addra_int + 11]; + doa_out[12] <= mem[data_addra_int + 12]; + doa_out[13] <= mem[data_addra_int + 13]; + doa_out[14] <= mem[data_addra_int + 14]; + doa_out[15] <= mem[data_addra_int + 15]; + doa_out[16] <= mem[data_addra_int + 16]; + doa_out[17] <= mem[data_addra_int + 17]; + doa_out[18] <= mem[data_addra_int + 18]; + doa_out[19] <= mem[data_addra_int + 19]; + doa_out[20] <= mem[data_addra_int + 20]; + doa_out[21] <= mem[data_addra_int + 21]; + doa_out[22] <= mem[data_addra_int + 22]; + doa_out[23] <= mem[data_addra_int + 23]; + doa_out[24] <= mem[data_addra_int + 24]; + doa_out[25] <= mem[data_addra_int + 25]; + doa_out[26] <= mem[data_addra_int + 26]; + doa_out[27] <= mem[data_addra_int + 27]; + doa_out[28] <= mem[data_addra_int + 28]; + doa_out[29] <= mem[data_addra_int + 29]; + doa_out[30] <= mem[data_addra_int + 30]; + doa_out[31] <= mem[data_addra_int + 31]; + dopa_out[0] <= mem[parity_addra_int + 0]; + dopa_out[1] <= mem[parity_addra_int + 1]; + dopa_out[2] <= mem[parity_addra_int + 2]; + dopa_out[3] <= mem[parity_addra_int + 3]; + end + end + else begin + doa_out[0] <= mem[data_addra_int + 0]; + doa_out[1] <= mem[data_addra_int + 1]; + doa_out[2] <= mem[data_addra_int + 2]; + doa_out[3] <= mem[data_addra_int + 3]; + doa_out[4] <= mem[data_addra_int + 4]; + doa_out[5] <= mem[data_addra_int + 5]; + doa_out[6] <= mem[data_addra_int + 6]; + doa_out[7] <= mem[data_addra_int + 7]; + doa_out[8] <= mem[data_addra_int + 8]; + doa_out[9] <= mem[data_addra_int + 9]; + doa_out[10] <= mem[data_addra_int + 10]; + doa_out[11] <= mem[data_addra_int + 11]; + doa_out[12] <= mem[data_addra_int + 12]; + doa_out[13] <= mem[data_addra_int + 13]; + doa_out[14] <= mem[data_addra_int + 14]; + doa_out[15] <= mem[data_addra_int + 15]; + doa_out[16] <= mem[data_addra_int + 16]; + doa_out[17] <= mem[data_addra_int + 17]; + doa_out[18] <= mem[data_addra_int + 18]; + doa_out[19] <= mem[data_addra_int + 19]; + doa_out[20] <= mem[data_addra_int + 20]; + doa_out[21] <= mem[data_addra_int + 21]; + doa_out[22] <= mem[data_addra_int + 22]; + doa_out[23] <= mem[data_addra_int + 23]; + doa_out[24] <= mem[data_addra_int + 24]; + doa_out[25] <= mem[data_addra_int + 25]; + doa_out[26] <= mem[data_addra_int + 26]; + doa_out[27] <= mem[data_addra_int + 27]; + doa_out[28] <= mem[data_addra_int + 28]; + doa_out[29] <= mem[data_addra_int + 29]; + doa_out[30] <= mem[data_addra_int + 30]; + doa_out[31] <= mem[data_addra_int + 31]; + dopa_out[0] <= mem[parity_addra_int + 0]; + dopa_out[1] <= mem[parity_addra_int + 1]; + dopa_out[2] <= mem[parity_addra_int + 2]; + dopa_out[3] <= mem[parity_addra_int + 3]; + end + end + end + end + + always @(posedge clka_int) begin + if (ena_int == 1'b1 && wea_int == 1'b1) begin + mem[data_addra_int + 0] <= dia_int[0]; + mem[data_addra_int + 1] <= dia_int[1]; + mem[data_addra_int + 2] <= dia_int[2]; + mem[data_addra_int + 3] <= dia_int[3]; + mem[data_addra_int + 4] <= dia_int[4]; + mem[data_addra_int + 5] <= dia_int[5]; + mem[data_addra_int + 6] <= dia_int[6]; + mem[data_addra_int + 7] <= dia_int[7]; + mem[data_addra_int + 8] <= dia_int[8]; + mem[data_addra_int + 9] <= dia_int[9]; + mem[data_addra_int + 10] <= dia_int[10]; + mem[data_addra_int + 11] <= dia_int[11]; + mem[data_addra_int + 12] <= dia_int[12]; + mem[data_addra_int + 13] <= dia_int[13]; + mem[data_addra_int + 14] <= dia_int[14]; + mem[data_addra_int + 15] <= dia_int[15]; + mem[data_addra_int + 16] <= dia_int[16]; + mem[data_addra_int + 17] <= dia_int[17]; + mem[data_addra_int + 18] <= dia_int[18]; + mem[data_addra_int + 19] <= dia_int[19]; + mem[data_addra_int + 20] <= dia_int[20]; + mem[data_addra_int + 21] <= dia_int[21]; + mem[data_addra_int + 22] <= dia_int[22]; + mem[data_addra_int + 23] <= dia_int[23]; + mem[data_addra_int + 24] <= dia_int[24]; + mem[data_addra_int + 25] <= dia_int[25]; + mem[data_addra_int + 26] <= dia_int[26]; + mem[data_addra_int + 27] <= dia_int[27]; + mem[data_addra_int + 28] <= dia_int[28]; + mem[data_addra_int + 29] <= dia_int[29]; + mem[data_addra_int + 30] <= dia_int[30]; + mem[data_addra_int + 31] <= dia_int[31]; + mem[parity_addra_int + 0] <= dipa_int[0]; + mem[parity_addra_int + 1] <= dipa_int[1]; + mem[parity_addra_int + 2] <= dipa_int[2]; + mem[parity_addra_int + 3] <= dipa_int[3]; + end + end + + // Port B + always @(posedge clkb_int) begin + if (enb_int == 1'b1) begin + if (ssrb_int == 1'b1) begin + dob_out[0] <= SRVAL_B[0]; + dob_out[1] <= SRVAL_B[1]; + dob_out[2] <= SRVAL_B[2]; + dob_out[3] <= SRVAL_B[3]; + dob_out[4] <= SRVAL_B[4]; + dob_out[5] <= SRVAL_B[5]; + dob_out[6] <= SRVAL_B[6]; + dob_out[7] <= SRVAL_B[7]; + dob_out[8] <= SRVAL_B[8]; + dob_out[9] <= SRVAL_B[9]; + dob_out[10] <= SRVAL_B[10]; + dob_out[11] <= SRVAL_B[11]; + dob_out[12] <= SRVAL_B[12]; + dob_out[13] <= SRVAL_B[13]; + dob_out[14] <= SRVAL_B[14]; + dob_out[15] <= SRVAL_B[15]; + dob_out[16] <= SRVAL_B[16]; + dob_out[17] <= SRVAL_B[17]; + dob_out[18] <= SRVAL_B[18]; + dob_out[19] <= SRVAL_B[19]; + dob_out[20] <= SRVAL_B[20]; + dob_out[21] <= SRVAL_B[21]; + dob_out[22] <= SRVAL_B[22]; + dob_out[23] <= SRVAL_B[23]; + dob_out[24] <= SRVAL_B[24]; + dob_out[25] <= SRVAL_B[25]; + dob_out[26] <= SRVAL_B[26]; + dob_out[27] <= SRVAL_B[27]; + dob_out[28] <= SRVAL_B[28]; + dob_out[29] <= SRVAL_B[29]; + dob_out[30] <= SRVAL_B[30]; + dob_out[31] <= SRVAL_B[31]; + dopb_out[0] <= SRVAL_B[32]; + dopb_out[1] <= SRVAL_B[33]; + dopb_out[2] <= SRVAL_B[34]; + dopb_out[3] <= SRVAL_B[35]; + end + else begin + if (web_int == 1'b1) begin + if (wr_mode_b == 2'b00) begin + dob_out <= dib_int; + dopb_out <= dipb_int; + end + else if (wr_mode_b == 2'b01) begin + dob_out[0] <= mem[data_addrb_int + 0]; + dob_out[1] <= mem[data_addrb_int + 1]; + dob_out[2] <= mem[data_addrb_int + 2]; + dob_out[3] <= mem[data_addrb_int + 3]; + dob_out[4] <= mem[data_addrb_int + 4]; + dob_out[5] <= mem[data_addrb_int + 5]; + dob_out[6] <= mem[data_addrb_int + 6]; + dob_out[7] <= mem[data_addrb_int + 7]; + dob_out[8] <= mem[data_addrb_int + 8]; + dob_out[9] <= mem[data_addrb_int + 9]; + dob_out[10] <= mem[data_addrb_int + 10]; + dob_out[11] <= mem[data_addrb_int + 11]; + dob_out[12] <= mem[data_addrb_int + 12]; + dob_out[13] <= mem[data_addrb_int + 13]; + dob_out[14] <= mem[data_addrb_int + 14]; + dob_out[15] <= mem[data_addrb_int + 15]; + dob_out[16] <= mem[data_addrb_int + 16]; + dob_out[17] <= mem[data_addrb_int + 17]; + dob_out[18] <= mem[data_addrb_int + 18]; + dob_out[19] <= mem[data_addrb_int + 19]; + dob_out[20] <= mem[data_addrb_int + 20]; + dob_out[21] <= mem[data_addrb_int + 21]; + dob_out[22] <= mem[data_addrb_int + 22]; + dob_out[23] <= mem[data_addrb_int + 23]; + dob_out[24] <= mem[data_addrb_int + 24]; + dob_out[25] <= mem[data_addrb_int + 25]; + dob_out[26] <= mem[data_addrb_int + 26]; + dob_out[27] <= mem[data_addrb_int + 27]; + dob_out[28] <= mem[data_addrb_int + 28]; + dob_out[29] <= mem[data_addrb_int + 29]; + dob_out[30] <= mem[data_addrb_int + 30]; + dob_out[31] <= mem[data_addrb_int + 31]; + dopb_out[0] <= mem[parity_addrb_int + 0]; + dopb_out[1] <= mem[parity_addrb_int + 1]; + dopb_out[2] <= mem[parity_addrb_int + 2]; + dopb_out[3] <= mem[parity_addrb_int + 3]; + end + end + else begin + dob_out[0] <= mem[data_addrb_int + 0]; + dob_out[1] <= mem[data_addrb_int + 1]; + dob_out[2] <= mem[data_addrb_int + 2]; + dob_out[3] <= mem[data_addrb_int + 3]; + dob_out[4] <= mem[data_addrb_int + 4]; + dob_out[5] <= mem[data_addrb_int + 5]; + dob_out[6] <= mem[data_addrb_int + 6]; + dob_out[7] <= mem[data_addrb_int + 7]; + dob_out[8] <= mem[data_addrb_int + 8]; + dob_out[9] <= mem[data_addrb_int + 9]; + dob_out[10] <= mem[data_addrb_int + 10]; + dob_out[11] <= mem[data_addrb_int + 11]; + dob_out[12] <= mem[data_addrb_int + 12]; + dob_out[13] <= mem[data_addrb_int + 13]; + dob_out[14] <= mem[data_addrb_int + 14]; + dob_out[15] <= mem[data_addrb_int + 15]; + dob_out[16] <= mem[data_addrb_int + 16]; + dob_out[17] <= mem[data_addrb_int + 17]; + dob_out[18] <= mem[data_addrb_int + 18]; + dob_out[19] <= mem[data_addrb_int + 19]; + dob_out[20] <= mem[data_addrb_int + 20]; + dob_out[21] <= mem[data_addrb_int + 21]; + dob_out[22] <= mem[data_addrb_int + 22]; + dob_out[23] <= mem[data_addrb_int + 23]; + dob_out[24] <= mem[data_addrb_int + 24]; + dob_out[25] <= mem[data_addrb_int + 25]; + dob_out[26] <= mem[data_addrb_int + 26]; + dob_out[27] <= mem[data_addrb_int + 27]; + dob_out[28] <= mem[data_addrb_int + 28]; + dob_out[29] <= mem[data_addrb_int + 29]; + dob_out[30] <= mem[data_addrb_int + 30]; + dob_out[31] <= mem[data_addrb_int + 31]; + dopb_out[0] <= mem[parity_addrb_int + 0]; + dopb_out[1] <= mem[parity_addrb_int + 1]; + dopb_out[2] <= mem[parity_addrb_int + 2]; + dopb_out[3] <= mem[parity_addrb_int + 3]; + end + end + end + end + + always @(posedge clkb_int) begin + if (enb_int == 1'b1 && web_int == 1'b1) begin + mem[data_addrb_int + 0] <= dib_int[0]; + mem[data_addrb_int + 1] <= dib_int[1]; + mem[data_addrb_int + 2] <= dib_int[2]; + mem[data_addrb_int + 3] <= dib_int[3]; + mem[data_addrb_int + 4] <= dib_int[4]; + mem[data_addrb_int + 5] <= dib_int[5]; + mem[data_addrb_int + 6] <= dib_int[6]; + mem[data_addrb_int + 7] <= dib_int[7]; + mem[data_addrb_int + 8] <= dib_int[8]; + mem[data_addrb_int + 9] <= dib_int[9]; + mem[data_addrb_int + 10] <= dib_int[10]; + mem[data_addrb_int + 11] <= dib_int[11]; + mem[data_addrb_int + 12] <= dib_int[12]; + mem[data_addrb_int + 13] <= dib_int[13]; + mem[data_addrb_int + 14] <= dib_int[14]; + mem[data_addrb_int + 15] <= dib_int[15]; + mem[data_addrb_int + 16] <= dib_int[16]; + mem[data_addrb_int + 17] <= dib_int[17]; + mem[data_addrb_int + 18] <= dib_int[18]; + mem[data_addrb_int + 19] <= dib_int[19]; + mem[data_addrb_int + 20] <= dib_int[20]; + mem[data_addrb_int + 21] <= dib_int[21]; + mem[data_addrb_int + 22] <= dib_int[22]; + mem[data_addrb_int + 23] <= dib_int[23]; + mem[data_addrb_int + 24] <= dib_int[24]; + mem[data_addrb_int + 25] <= dib_int[25]; + mem[data_addrb_int + 26] <= dib_int[26]; + mem[data_addrb_int + 27] <= dib_int[27]; + mem[data_addrb_int + 28] <= dib_int[28]; + mem[data_addrb_int + 29] <= dib_int[29]; + mem[data_addrb_int + 30] <= dib_int[30]; + mem[data_addrb_int + 31] <= dib_int[31]; + mem[parity_addrb_int + 0] <= dipb_int[0]; + mem[parity_addrb_int + 1] <= dipb_int[1]; + mem[parity_addrb_int + 2] <= dipb_int[2]; + mem[parity_addrb_int + 3] <= dipb_int[3]; + end + end + + specify + (CLKA *> DOA) = (100, 100); + (CLKA *> DOPA) = (100, 100); + (CLKB *> DOB) = (100, 100); + (CLKB *> DOPB) = (100, 100); + endspecify + +endmodule + +`else + +// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/unisims/RAMB16_S36_S36.v,v 1.9 2005/03/14 22:54:41 wloo Exp $ +/////////////////////////////////////////////////////////////////////////////// +// Copyright (c) 1995/2005 Xilinx, Inc. +// All Right Reserved. +/////////////////////////////////////////////////////////////////////////////// +// ____ ____ +// / /\/ / +// /___/ \ / Vendor : Xilinx +// \ \ \/ Version : 8.1i (I.13) +// \ \ Description : Xilinx Timing Simulation Library Component +// / / 16K-Bit Data and 2K-Bit Parity Dual Port Block RAM +// /___/ /\ Filename : RAMB16_S36_S36.v +// \ \ / \ Timestamp : Thu Mar 10 16:44:01 PST 2005 +// \___\/\___\ +// +// Revision: +// 03/23/04 - Initial version. +// 03/10/05 - Initialized outputs. +// End Revision + +`timescale 1 ps/1 ps + +module RAMB16_S36_S36 (DOA, DOB, DOPA, DOPB, ADDRA, ADDRB, CLKA, CLKB, DIA, DIB, DIPA, DIPB, ENA, ENB, SSRA, SSRB, WEA, WEB); + + parameter INIT_A = 36'h0; + parameter INIT_B = 36'h0; + parameter SRVAL_A = 36'h0; + parameter SRVAL_B = 36'h0; + parameter WRITE_MODE_A = "WRITE_FIRST"; + parameter WRITE_MODE_B = "WRITE_FIRST"; + parameter SIM_COLLISION_CHECK = "ALL"; + localparam SETUP_ALL = 1000; + localparam SETUP_READ_FIRST = 3000; + + parameter INIT_00 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_01 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_02 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_03 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_04 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_05 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_06 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_07 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_08 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_09 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_0A = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_0B = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_0C = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_0D = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_0E = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_0F = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_10 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_11 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_12 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_13 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_14 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_15 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_16 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_17 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_18 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_19 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_1A = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_1B = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_1C = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_1D = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_1E = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_1F = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_20 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_21 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_22 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_23 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_24 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_25 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_26 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_27 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_28 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_29 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_2A = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_2B = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_2C = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_2D = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_2E = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_2F = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_30 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_31 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_32 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_33 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_34 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_35 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_36 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_37 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_38 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_39 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_3A = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_3B = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_3C = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_3D = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_3E = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INIT_3F = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INITP_00 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INITP_01 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INITP_02 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INITP_03 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INITP_04 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INITP_05 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INITP_06 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + parameter INITP_07 = 256'h0000000000000000000000000000000000000000000000000000000000000000; + + output [31:0] DOA; + output [3:0] DOPA; + output [31:0] DOB; + output [3:0] DOPB; + + input [8:0] ADDRA; + input [31:0] DIA; + input [3:0] DIPA; + input ENA, CLKA, WEA, SSRA; + input [8:0] ADDRB; + input [31:0] DIB; + input [3:0] DIPB; + input ENB, CLKB, WEB, SSRB; + + reg [31:0] doa_out = INIT_A[31:0]; + reg [3:0] dopa_out = INIT_A[35:32]; + reg [31:0] dob_out = INIT_B[31:0]; + reg [3:0] dopb_out = INIT_B[35:32]; + + reg [31:0] mem [511:0]; + reg [3:0] memp [511:0]; + + reg [8:0] count, countp; + reg [1:0] wr_mode_a, wr_mode_b; + + reg [5:0] dmi, dbi; + reg [5:0] pmi, pbi; + + wire [8:0] addra_int; + reg [8:0] addra_reg; + wire [31:0] dia_int; + wire [3:0] dipa_int; + wire ena_int, clka_int, wea_int, ssra_int; + reg ena_reg, wea_reg, ssra_reg; + wire [8:0] addrb_int; + reg [8:0] addrb_reg; + wire [31:0] dib_int; + wire [3:0] dipb_int; + wire enb_int, clkb_int, web_int, ssrb_int; + reg display_flag, output_flag; + reg enb_reg, web_reg, ssrb_reg; + + time time_clka, time_clkb; + time time_clka_clkb; + time time_clkb_clka; + + reg setup_all_a_b; + reg setup_all_b_a; + reg setup_zero; + reg setup_rf_a_b; + reg setup_rf_b_a; + reg [1:0] data_collision, data_collision_a_b, data_collision_b_a; + reg memory_collision, memory_collision_a_b, memory_collision_b_a; + reg change_clka; + reg change_clkb; + + wire [14:0] data_addra_int; + wire [14:0] data_addra_reg; + wire [14:0] data_addrb_int; + wire [14:0] data_addrb_reg; + + wire dia_enable = ena_int && wea_int; + wire dib_enable = enb_int && web_int; + + tri0 GSR = glbl.GSR; + wire gsr_int; + + buf b_gsr (gsr_int, GSR); + + buf b_doa [31:0] (DOA, doa_out); + buf b_dopa [3:0] (DOPA, dopa_out); + buf b_addra [8:0] (addra_int, ADDRA); + buf b_dia [31:0] (dia_int, DIA); + buf b_dipa [3:0] (dipa_int, DIPA); + buf b_ena (ena_int, ENA); + buf b_clka (clka_int, CLKA); + buf b_ssra (ssra_int, SSRA); + buf b_wea (wea_int, WEA); + + buf b_dob [31:0] (DOB, dob_out); + buf b_dopb [3:0] (DOPB, dopb_out); + buf b_addrb [8:0] (addrb_int, ADDRB); + buf b_dib [31:0] (dib_int, DIB); + buf b_dipb [3:0] (dipb_int, DIPB); + buf b_enb (enb_int, ENB); + buf b_clkb (clkb_int, CLKB); + buf b_ssrb (ssrb_int, SSRB); + buf b_web (web_int, WEB); + + + always @(gsr_int) + if (gsr_int) begin + assign {dopa_out, doa_out} = INIT_A; + assign {dopb_out, dob_out} = INIT_B; + end + else begin + deassign doa_out; + deassign dopa_out; + deassign dob_out; + deassign dopb_out; + end + + initial begin : initialize_mems + +`ifdef UNDEFINED + for (count = 0; count < 8; count = count + 1) begin + mem[count] = INIT_00[(count * 32) +: 32]; + mem[8 * 1 + count] = INIT_01[(count * 32) +: 32]; + mem[8 * 2 + count] = INIT_02[(count * 32) +: 32]; + mem[8 * 3 + count] = INIT_03[(count * 32) +: 32]; + mem[8 * 4 + count] = INIT_04[(count * 32) +: 32]; + mem[8 * 5 + count] = INIT_05[(count * 32) +: 32]; + mem[8 * 6 + count] = INIT_06[(count * 32) +: 32]; + mem[8 * 7 + count] = INIT_07[(count * 32) +: 32]; + mem[8 * 8 + count] = INIT_08[(count * 32) +: 32]; + mem[8 * 9 + count] = INIT_09[(count * 32) +: 32]; + mem[8 * 10 + count] = INIT_0A[(count * 32) +: 32]; + mem[8 * 11 + count] = INIT_0B[(count * 32) +: 32]; + mem[8 * 12 + count] = INIT_0C[(count * 32) +: 32]; + mem[8 * 13 + count] = INIT_0D[(count * 32) +: 32]; + mem[8 * 14 + count] = INIT_0E[(count * 32) +: 32]; + mem[8 * 15 + count] = INIT_0F[(count * 32) +: 32]; + mem[8 * 16 + count] = INIT_10[(count * 32) +: 32]; + mem[8 * 17 + count] = INIT_11[(count * 32) +: 32]; + mem[8 * 18 + count] = INIT_12[(count * 32) +: 32]; + mem[8 * 19 + count] = INIT_13[(count * 32) +: 32]; + mem[8 * 20 + count] = INIT_14[(count * 32) +: 32]; + mem[8 * 21 + count] = INIT_15[(count * 32) +: 32]; + mem[8 * 22 + count] = INIT_16[(count * 32) +: 32]; + mem[8 * 23 + count] = INIT_17[(count * 32) +: 32]; + mem[8 * 24 + count] = INIT_18[(count * 32) +: 32]; + mem[8 * 25 + count] = INIT_19[(count * 32) +: 32]; + mem[8 * 26 + count] = INIT_1A[(count * 32) +: 32]; + mem[8 * 27 + count] = INIT_1B[(count * 32) +: 32]; + mem[8 * 28 + count] = INIT_1C[(count * 32) +: 32]; + mem[8 * 29 + count] = INIT_1D[(count * 32) +: 32]; + mem[8 * 30 + count] = INIT_1E[(count * 32) +: 32]; + mem[8 * 31 + count] = INIT_1F[(count * 32) +: 32]; + mem[8 * 32 + count] = INIT_20[(count * 32) +: 32]; + mem[8 * 33 + count] = INIT_21[(count * 32) +: 32]; + mem[8 * 34 + count] = INIT_22[(count * 32) +: 32]; + mem[8 * 35 + count] = INIT_23[(count * 32) +: 32]; + mem[8 * 36 + count] = INIT_24[(count * 32) +: 32]; + mem[8 * 37 + count] = INIT_25[(count * 32) +: 32]; + mem[8 * 38 + count] = INIT_26[(count * 32) +: 32]; + mem[8 * 39 + count] = INIT_27[(count * 32) +: 32]; + mem[8 * 40 + count] = INIT_28[(count * 32) +: 32]; + mem[8 * 41 + count] = INIT_29[(count * 32) +: 32]; + mem[8 * 42 + count] = INIT_2A[(count * 32) +: 32]; + mem[8 * 43 + count] = INIT_2B[(count * 32) +: 32]; + mem[8 * 44 + count] = INIT_2C[(count * 32) +: 32]; + mem[8 * 45 + count] = INIT_2D[(count * 32) +: 32]; + mem[8 * 46 + count] = INIT_2E[(count * 32) +: 32]; + mem[8 * 47 + count] = INIT_2F[(count * 32) +: 32]; + mem[8 * 48 + count] = INIT_30[(count * 32) +: 32]; + mem[8 * 49 + count] = INIT_31[(count * 32) +: 32]; + mem[8 * 50 + count] = INIT_32[(count * 32) +: 32]; + mem[8 * 51 + count] = INIT_33[(count * 32) +: 32]; + mem[8 * 52 + count] = INIT_34[(count * 32) +: 32]; + mem[8 * 53 + count] = INIT_35[(count * 32) +: 32]; + mem[8 * 54 + count] = INIT_36[(count * 32) +: 32]; + mem[8 * 55 + count] = INIT_37[(count * 32) +: 32]; + mem[8 * 56 + count] = INIT_38[(count * 32) +: 32]; + mem[8 * 57 + count] = INIT_39[(count * 32) +: 32]; + mem[8 * 58 + count] = INIT_3A[(count * 32) +: 32]; + mem[8 * 59 + count] = INIT_3B[(count * 32) +: 32]; + mem[8 * 60 + count] = INIT_3C[(count * 32) +: 32]; + mem[8 * 61 + count] = INIT_3D[(count * 32) +: 32]; + mem[8 * 62 + count] = INIT_3E[(count * 32) +: 32]; + mem[8 * 63 + count] = INIT_3F[(count * 32) +: 32]; + end +`else + integer i; + for (i = 0; i < 512; i = i + 1) + begin + mem[i] = 0; + memp[i] = 0; + end + +`endif + +// initiate parity start +`ifdef UNDEFINED + for (countp = 0; countp < 64; countp = countp + 1) begin + memp[countp] = INITP_00[(countp * 4) +: 4]; + memp[64 * 1 + countp] = INITP_01[(countp * 4) +: 4]; + memp[64 * 2 + countp] = INITP_02[(countp * 4) +: 4]; + memp[64 * 3 + countp] = INITP_03[(countp * 4) +: 4]; + memp[64 * 4 + countp] = INITP_04[(countp * 4) +: 4]; + memp[64 * 5 + countp] = INITP_05[(countp * 4) +: 4]; + memp[64 * 6 + countp] = INITP_06[(countp * 4) +: 4]; + memp[64 * 7 + countp] = INITP_07[(countp * 4) +: 4]; + end +`endif +// initiate parity end + + change_clka <= 0; + change_clkb <= 0; + data_collision <= 0; + data_collision_a_b <= 0; + data_collision_b_a <= 0; + memory_collision <= 0; + memory_collision_a_b <= 0; + memory_collision_b_a <= 0; + setup_all_a_b <= 0; + setup_all_b_a <= 0; + setup_zero <= 0; + setup_rf_a_b <= 0; + setup_rf_b_a <= 0; + end + + assign data_addra_int = addra_int * 32; + assign data_addra_reg = addra_reg * 32; + assign data_addrb_int = addrb_int * 32; + assign data_addrb_reg = addrb_reg * 32; + + + initial begin + + display_flag = 1; + output_flag = 1; + + case (SIM_COLLISION_CHECK) + + "NONE" : begin + output_flag = 0; + display_flag = 0; + end + "WARNING_ONLY" : output_flag = 0; + "GENERATE_ONLY" : display_flag = 0; + "ALL" : ; + + default : begin + $display("Attribute Syntax Error : The Attribute SIM_COLLISION_CHECK on RAMB16_S36_S36 instance %m is set to %s. Legal values for this attribute are ALL, NONE, WARNING_ONLY or GENERATE_ONLY.", SIM_COLLISION_CHECK); + $finish; + end + + endcase // case(SIM_COLLISION_CHECK) + + end // initial begin + + + always @(posedge clka_int) begin + if ((output_flag || display_flag)) begin + time_clka = $time; + #0 time_clkb_clka = time_clka - time_clkb; + change_clka = ~change_clka; + end + end + + always @(posedge clkb_int) begin + if ((output_flag || display_flag)) begin + time_clkb = $time; + #0 time_clka_clkb = time_clkb - time_clka; + change_clkb = ~change_clkb; + end + end + + always @(change_clkb) begin + if ((0 < time_clka_clkb) && (time_clka_clkb < SETUP_ALL)) + setup_all_a_b = 1; + if ((0 < time_clka_clkb) && (time_clka_clkb < SETUP_READ_FIRST)) + setup_rf_a_b = 1; + end + + always @(change_clka) begin + if ((0 < time_clkb_clka) && (time_clkb_clka < SETUP_ALL)) + setup_all_b_a = 1; + if ((0 < time_clkb_clka) && (time_clkb_clka < SETUP_READ_FIRST)) + setup_rf_b_a = 1; + end + + always @(change_clkb or change_clka) begin + if ((time_clkb_clka == 0) && (time_clka_clkb == 0)) + setup_zero = 1; + end + + always @(posedge setup_zero) begin + if ((ena_int == 1) && (wea_int == 1) && + (enb_int == 1) && (web_int == 1) && + (data_addra_int[14:5] == data_addrb_int[14:5])) + memory_collision <= 1; + end + + always @(posedge setup_all_a_b or posedge setup_rf_a_b) begin + if ((ena_reg == 1) && (wea_reg == 1) && + (enb_int == 1) && (web_int == 1) && + (data_addra_reg[14:5] == data_addrb_int[14:5])) + memory_collision_a_b <= 1; + end + + always @(posedge setup_all_b_a or posedge setup_rf_b_a) begin + if ((ena_int == 1) && (wea_int == 1) && + (enb_reg == 1) && (web_reg == 1) && + (data_addra_int[14:5] == data_addrb_reg[14:5])) + memory_collision_b_a <= 1; + end + + always @(posedge setup_all_a_b) begin + if (data_addra_reg[14:5] == data_addrb_int[14:5]) begin + if ((ena_reg == 1) && (enb_int == 1)) begin + case ({wr_mode_a, wr_mode_b, wea_reg, web_int}) + 6'b000011 : begin data_collision_a_b <= 2'b11; display_wa_wb; end + 6'b000111 : begin data_collision_a_b <= 2'b11; display_wa_wb; end + 6'b001011 : begin data_collision_a_b <= 2'b10; display_wa_wb; end +// 6'b010011 : begin data_collision_a_b <= 2'b00; display_wa_wb; end +// 6'b010111 : begin data_collision_a_b <= 2'b00; display_wa_wb; end +// 6'b011011 : begin data_collision_a_b <= 2'b00; display_wa_wb; end + 6'b100011 : begin data_collision_a_b <= 2'b01; display_wa_wb; end + 6'b100111 : begin data_collision_a_b <= 2'b01; display_wa_wb; end + 6'b101011 : begin display_wa_wb; end + 6'b000001 : begin data_collision_a_b <= 2'b10; display_ra_wb; end +// 6'b000101 : begin data_collision_a_b <= 2'b00; display_ra_wb; end + 6'b001001 : begin data_collision_a_b <= 2'b10; display_ra_wb; end + 6'b010001 : begin data_collision_a_b <= 2'b10; display_ra_wb; end +// 6'b010101 : begin data_collision_a_b <= 2'b00; display_ra_wb; end + 6'b011001 : begin data_collision_a_b <= 2'b10; display_ra_wb; end + 6'b100001 : begin data_collision_a_b <= 2'b10; display_ra_wb; end +// 6'b100101 : begin data_collision_a_b <= 2'b00; display_ra_wb; end + 6'b101001 : begin data_collision_a_b <= 2'b10; display_ra_wb; end + 6'b000010 : begin data_collision_a_b <= 2'b01; display_wa_rb; end + 6'b000110 : begin data_collision_a_b <= 2'b01; display_wa_rb; end + 6'b001010 : begin data_collision_a_b <= 2'b01; display_wa_rb; end +// 6'b010010 : begin data_collision_a_b <= 2'b00; display_wa_rb; end +// 6'b010110 : begin data_collision_a_b <= 2'b00; display_wa_rb; end +// 6'b011010 : begin data_collision_a_b <= 2'b00; display_wa_rb; end + 6'b100010 : begin data_collision_a_b <= 2'b01; display_wa_rb; end + 6'b100110 : begin data_collision_a_b <= 2'b01; display_wa_rb; end + 6'b101010 : begin data_collision_a_b <= 2'b01; display_wa_rb; end + endcase + end + end + setup_all_a_b <= 0; + end + + + always @(posedge setup_all_b_a) begin + if (data_addra_int[14:5] == data_addrb_reg[14:5]) begin + if ((ena_int == 1) && (enb_reg == 1)) begin + case ({wr_mode_a, wr_mode_b, wea_int, web_reg}) + 6'b000011 : begin data_collision_b_a <= 2'b11; display_wa_wb; end +// 6'b000111 : begin data_collision_b_a <= 2'b00; display_wa_wb; end + 6'b001011 : begin data_collision_b_a <= 2'b10; display_wa_wb; end + 6'b010011 : begin data_collision_b_a <= 2'b11; display_wa_wb; end +// 6'b010111 : begin data_collision_b_a <= 2'b00; display_wa_wb; end + 6'b011011 : begin data_collision_b_a <= 2'b10; display_wa_wb; end + 6'b100011 : begin data_collision_b_a <= 2'b01; display_wa_wb; end + 6'b100111 : begin data_collision_b_a <= 2'b01; display_wa_wb; end + 6'b101011 : begin display_wa_wb; end + 6'b000001 : begin data_collision_b_a <= 2'b10; display_ra_wb; end + 6'b000101 : begin data_collision_b_a <= 2'b10; display_ra_wb; end + 6'b001001 : begin data_collision_b_a <= 2'b10; display_ra_wb; end + 6'b010001 : begin data_collision_b_a <= 2'b10; display_ra_wb; end + 6'b010101 : begin data_collision_b_a <= 2'b10; display_ra_wb; end + 6'b011001 : begin data_collision_b_a <= 2'b10; display_ra_wb; end + 6'b100001 : begin data_collision_b_a <= 2'b10; display_ra_wb; end + 6'b100101 : begin data_collision_b_a <= 2'b10; display_ra_wb; end + 6'b101001 : begin data_collision_b_a <= 2'b10; display_ra_wb; end + 6'b000010 : begin data_collision_b_a <= 2'b01; display_wa_rb; end + 6'b000110 : begin data_collision_b_a <= 2'b01; display_wa_rb; end + 6'b001010 : begin data_collision_b_a <= 2'b01; display_wa_rb; end +// 6'b010010 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b010110 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b011010 : begin data_collision_b_a <= 2'b00; display_wa_rb; end + 6'b100010 : begin data_collision_b_a <= 2'b01; display_wa_rb; end + 6'b100110 : begin data_collision_b_a <= 2'b01; display_wa_rb; end + 6'b101010 : begin data_collision_b_a <= 2'b01; display_wa_rb; end + endcase + end + end + setup_all_b_a <= 0; + end + + + always @(posedge setup_zero) begin + if (data_addra_int[14:5] == data_addrb_int[14:5]) begin + if ((ena_int == 1) && (enb_int == 1)) begin + case ({wr_mode_a, wr_mode_b, wea_int, web_int}) + 6'b000011 : begin data_collision <= 2'b11; display_wa_wb; end + 6'b000111 : begin data_collision <= 2'b11; display_wa_wb; end + 6'b001011 : begin data_collision <= 2'b10; display_wa_wb; end + 6'b010011 : begin data_collision <= 2'b11; display_wa_wb; end + 6'b010111 : begin data_collision <= 2'b11; display_wa_wb; end + 6'b011011 : begin data_collision <= 2'b10; display_wa_wb; end + 6'b100011 : begin data_collision <= 2'b01; display_wa_wb; end + 6'b100111 : begin data_collision <= 2'b01; display_wa_wb; end + 6'b101011 : begin display_wa_wb; end + 6'b000001 : begin data_collision <= 2'b10; display_ra_wb; end +// 6'b000101 : begin data_collision <= 2'b00; display_ra_wb; end + 6'b001001 : begin data_collision <= 2'b10; display_ra_wb; end + 6'b010001 : begin data_collision <= 2'b10; display_ra_wb; end +// 6'b010101 : begin data_collision <= 2'b00; display_ra_wb; end + 6'b011001 : begin data_collision <= 2'b10; display_ra_wb; end + 6'b100001 : begin data_collision <= 2'b10; display_ra_wb; end +// 6'b100101 : begin data_collision <= 2'b00; display_ra_wb; end + 6'b101001 : begin data_collision <= 2'b10; display_ra_wb; end + 6'b000010 : begin data_collision <= 2'b01; display_wa_rb; end + 6'b000110 : begin data_collision <= 2'b01; display_wa_rb; end + 6'b001010 : begin data_collision <= 2'b01; display_wa_rb; end +// 6'b010010 : begin data_collision <= 2'b00; display_wa_rb; end +// 6'b010110 : begin data_collision <= 2'b00; display_wa_rb; end +// 6'b011010 : begin data_collision <= 2'b00; display_wa_rb; end + 6'b100010 : begin data_collision <= 2'b01; display_wa_rb; end + 6'b100110 : begin data_collision <= 2'b01; display_wa_rb; end + 6'b101010 : begin data_collision <= 2'b01; display_wa_rb; end + endcase + end + end + setup_zero <= 0; + end + + task display_ra_wb; + begin + if (display_flag) + $display("Memory Collision Error on RAMB16_S36_S36:%m at simulation time %.3f ns\nA read was performed on address %h (hex) of Port A while a write was requested to the same address on Port B. The write will be successful however the read value on Port A is unknown until the next CLKA cycle.", $time/1000.0, addra_int); + end + endtask + + task display_wa_rb; + begin + if (display_flag) + $display("Memory Collision Error on RAMB16_S36_S36:%m at simulation time %.3f ns\nA read was performed on address %h (hex) of Port B while a write was requested to the same address on Port A. The write will be successful however the read value on Port B is unknown until the next CLKB cycle.", $time/1000.0, addrb_int); + end + endtask + + task display_wa_wb; + begin + if (display_flag) + $display("Memory Collision Error on RAMB16_S36_S36:%m at simulation time %.3f ns\nA write was requested to the same address simultaneously at both Port A and Port B of the RAM. The contents written to the RAM at address location %h (hex) of Port A and address location %h (hex) of Port B are unknown.", $time/1000.0, addra_int, addrb_int); + end + endtask + + + always @(posedge setup_rf_a_b) begin + if (data_addra_reg[14:5] == data_addrb_int[14:5]) begin + if ((ena_reg == 1) && (enb_int == 1)) begin + case ({wr_mode_a, wr_mode_b, wea_reg, web_int}) +// 6'b000011 : begin data_collision_a_b <= 2'b00; display_wa_wb; end +// 6'b000111 : begin data_collision_a_b <= 2'b00; display_wa_wb; end +// 6'b001011 : begin data_collision_a_b <= 2'b00; display_wa_wb; end + 6'b010011 : begin data_collision_a_b <= 2'b11; display_wa_wb; end + 6'b010111 : begin data_collision_a_b <= 2'b11; display_wa_wb; end + 6'b011011 : begin data_collision_a_b <= 2'b10; display_wa_wb; end +// 6'b100011 : begin data_collision_a_b <= 2'b00; display_wa_wb; end +// 6'b100111 : begin data_collision_a_b <= 2'b00; display_wa_wb; end +// 6'b101011 : begin data_collision_a_b <= 2'b00; display_wa_wb; end +// 6'b000001 : begin data_collision_a_b <= 2'b00; display_ra_wb; end +// 6'b000101 : begin data_collision_a_b <= 2'b00; display_ra_wb; end +// 6'b001001 : begin data_collision_a_b <= 2'b00; display_ra_wb; end +// 6'b010001 : begin data_collision_a_b <= 2'b00; display_ra_wb; end +// 6'b010101 : begin data_collision_a_b <= 2'b00; display_ra_wb; end +// 6'b011001 : begin data_collision_a_b <= 2'b00; display_ra_wb; end +// 6'b100001 : begin data_collision_a_b <= 2'b00; display_ra_wb; end +// 6'b100101 : begin data_collision_a_b <= 2'b00; display_ra_wb; end +// 6'b101001 : begin data_collision_a_b <= 2'b00; display_ra_wb; end +// 6'b000010 : begin data_collision_a_b <= 2'b00; display_wa_rb; end +// 6'b000110 : begin data_collision_a_b <= 2'b00; display_wa_rb; end +// 6'b001010 : begin data_collision_a_b <= 2'b00; display_wa_rb; end + 6'b010010 : begin data_collision_a_b <= 2'b01; display_wa_rb; end + 6'b010110 : begin data_collision_a_b <= 2'b01; display_wa_rb; end + 6'b011010 : begin data_collision_a_b <= 2'b01; display_wa_rb; end +// 6'b100010 : begin data_collision_a_b <= 2'b00; display_wa_rb; end +// 6'b100110 : begin data_collision_a_b <= 2'b00; display_wa_rb; end +// 6'b101010 : begin data_collision_a_b <= 2'b00; display_wa_rb; end + endcase + end + end + setup_rf_a_b <= 0; + end + + + always @(posedge setup_rf_b_a) begin + if (data_addra_int[14:5] == data_addrb_reg[14:5]) begin + if ((ena_int == 1) && (enb_reg == 1)) begin + case ({wr_mode_a, wr_mode_b, wea_int, web_reg}) +// 6'b000011 : begin data_collision_b_a <= 2'b00; display_wa_wb; end + 6'b000111 : begin data_collision_b_a <= 2'b11; display_wa_wb; end +// 6'b001011 : begin data_collision_b_a <= 2'b00; display_wa_wb; end +// 6'b010011 : begin data_collision_b_a <= 2'b00; display_wa_wb; end + 6'b010111 : begin data_collision_b_a <= 2'b11; display_wa_wb; end +// 6'b011011 : begin data_collision_b_a <= 2'b00; display_wa_wb; end +// 6'b100011 : begin data_collision_b_a <= 2'b00; display_wa_wb; end + 6'b100111 : begin data_collision_b_a <= 2'b01; display_wa_wb; end +// 6'b101011 : begin data_collision_b_a <= 2'b00; display_wa_wb; end +// 6'b000001 : begin data_collision_b_a <= 2'b00; display_ra_wb; end + 6'b000101 : begin data_collision_b_a <= 2'b10; display_ra_wb; end +// 6'b001001 : begin data_collision_b_a <= 2'b00; display_ra_wb; end +// 6'b010001 : begin data_collision_b_a <= 2'b00; display_ra_wb; end + 6'b010101 : begin data_collision_b_a <= 2'b10; display_ra_wb; end +// 6'b011001 : begin data_collision_b_a <= 2'b00; display_ra_wb; end +// 6'b100001 : begin data_collision_b_a <= 2'b00; display_ra_wb; end + 6'b100101 : begin data_collision_b_a <= 2'b10; display_ra_wb; end +// 6'b101001 : begin data_collision_b_a <= 2'b00; display_ra_wb; end +// 6'b000010 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b000110 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b001010 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b010010 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b010110 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b011010 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b100010 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b100110 : begin data_collision_b_a <= 2'b00; display_wa_rb; end +// 6'b101010 : begin data_collision_b_a <= 2'b00; display_wa_rb; end + endcase + end + end + setup_rf_b_a <= 0; + end + + + always @(posedge clka_int) begin + if ((output_flag || display_flag)) begin + addra_reg <= addra_int; + ena_reg <= ena_int; + ssra_reg <= ssra_int; + wea_reg <= wea_int; + end + end + + always @(posedge clkb_int) begin + if ((output_flag || display_flag)) begin + addrb_reg <= addrb_int; + enb_reg <= enb_int; + ssrb_reg <= ssrb_int; + web_reg <= web_int; + end + end + + + // Data + always @(posedge memory_collision) begin + if ((output_flag || display_flag)) begin + mem[addra_int] <= 32'bx; + memory_collision <= 0; + end + + end + + always @(posedge memory_collision_a_b) begin + if ((output_flag || display_flag)) begin + mem[addra_reg] <= 32'bx; + memory_collision_a_b <= 0; + end + end + + always @(posedge memory_collision_b_a) begin + if ((output_flag || display_flag)) begin + mem[addra_int] <= 32'bx; + memory_collision_b_a <= 0; + end + end + + always @(posedge data_collision[1]) begin + if (ssra_int == 0 && output_flag) begin + doa_out <= #100 32'bX; + end + data_collision[1] <= 0; + end + + always @(posedge data_collision[0]) begin + if (ssrb_int == 0 && output_flag) begin + dob_out <= #100 32'bX; + end + data_collision[0] <= 0; + end + + always @(posedge data_collision_a_b[1]) begin + if (ssra_reg == 0 && output_flag) begin + doa_out <= #100 32'bX; + end + data_collision_a_b[1] <= 0; + end + + always @(posedge data_collision_a_b[0]) begin + if (ssrb_int == 0 && output_flag) begin + dob_out <= #100 32'bX; + end + data_collision_a_b[0] <= 0; + end + + always @(posedge data_collision_b_a[1]) begin + if (ssra_int == 0 && output_flag) begin + doa_out <= #100 32'bX; + end + data_collision_b_a[1] <= 0; + end + + always @(posedge data_collision_b_a[0]) begin + if (ssrb_reg == 0 && output_flag) begin + dob_out <= #100 32'bX; + end + data_collision_b_a[0] <= 0; + end + +// x parity start + always @(posedge memory_collision) begin + if ((output_flag || display_flag)) + memp[addra_int] <= 4'bx; + end + + always @(posedge memory_collision_a_b) begin + if ((output_flag || display_flag)) + memp[addra_reg] <= 4'bx; + end + + always @(posedge memory_collision_b_a) begin + if ((output_flag || display_flag)) + memp[addra_int] <= 4'bx; + end + + always @(posedge data_collision[1]) begin + if (ssra_int == 0 && output_flag) begin + dopa_out <= #100 4'bX; + end + end + + always @(posedge data_collision_a_b[1]) begin + if (ssra_reg == 0 && output_flag) begin + dopa_out <= #100 4'bX; + end + end + + + always @(posedge data_collision_b_a[1]) begin + if (ssra_int == 0 && output_flag) begin + dopa_out <= #100 4'bX; + end + end + + always @(posedge data_collision[0]) begin + if (ssrb_int == 0 && output_flag) begin + dopb_out <= #100 4'bx; + end + end + + always @(posedge data_collision_a_b[0]) begin + if (ssrb_int == 0 && output_flag) begin + dopb_out <= #100 4'bx; + end + end + + always @(posedge data_collision_b_a[0]) begin + if (ssrb_reg == 0 && output_flag) begin + dopb_out <= #100 4'bx; + end + end +// x parity end + + initial begin + case (WRITE_MODE_A) + "WRITE_FIRST" : wr_mode_a <= 2'b00; + "READ_FIRST" : wr_mode_a <= 2'b01; + "NO_CHANGE" : wr_mode_a <= 2'b10; + default : begin + $display("Attribute Syntax Error : The Attribute WRITE_MODE_A on RAMB16_S36_S36 instance %m is set to %s. Legal values for this attribute are WRITE_FIRST, READ_FIRST or NO_CHANGE.", WRITE_MODE_A); + $finish; + end + endcase + end + + initial begin + case (WRITE_MODE_B) + "WRITE_FIRST" : wr_mode_b <= 2'b00; + "READ_FIRST" : wr_mode_b <= 2'b01; + "NO_CHANGE" : wr_mode_b <= 2'b10; + default : begin + $display("Attribute Syntax Error : The Attribute WRITE_MODE_B on RAMB16_S36_S36 instance %m is set to %s. Legal values for this attribute are WRITE_FIRST, READ_FIRST or NO_CHANGE.", WRITE_MODE_B); + $finish; + end + endcase + end + + + // Port A + always @(posedge clka_int) begin + + if (ena_int == 1'b1) begin + + if (ssra_int == 1'b1) begin + {dopa_out, doa_out} <= #100 SRVAL_A; + end + else begin + if (wea_int == 1'b1) begin + if (wr_mode_a == 2'b00) begin + doa_out <= #100 dia_int; + dopa_out <= #100 dipa_int; + end + else if (wr_mode_a == 2'b01) begin + + doa_out <= #100 mem[addra_int]; + dopa_out <= #100 memp[addra_int]; + + end + end + else begin + + doa_out <= #100 mem[addra_int]; + dopa_out <= #100 memp[addra_int]; + + end + end + + // memory + if (wea_int == 1'b1) begin + mem[addra_int] <= dia_int; + memp[addra_int] <= dipa_int; + end + + end + end + + + // Port B + always @(posedge clkb_int) begin + + if (enb_int == 1'b1) begin + + if (ssrb_int == 1'b1) begin + {dopb_out, dob_out} <= #100 SRVAL_B; + end + else begin + if (web_int == 1'b1) begin + if (wr_mode_b == 2'b00) begin + dob_out <= #100 dib_int; + dopb_out <= #100 dipb_int; + end + else if (wr_mode_b == 2'b01) begin + dob_out <= #100 mem[addrb_int]; + dopb_out <= #100 memp[addrb_int]; + end + end + else begin + dob_out <= #100 mem[addrb_int]; + dopb_out <= #100 memp[addrb_int]; + end + end + + // memory + if (web_int == 1'b1) begin + mem[addrb_int] <= dib_int; + memp[addrb_int] <= dipb_int; + end + + end + end + + +endmodule + +`endif diff --git a/eth/rtl/verilog/elastic_buffer.v b/eth/rtl/verilog/elastic_buffer.v new file mode 100644 index 000000000..56c821b7e --- /dev/null +++ b/eth/rtl/verilog/elastic_buffer.v @@ -0,0 +1,93 @@ + + +module elastic_buffer + ( input rx_clk, + input tx_clk, + input rst, + + input [7:0] rxd, + input rx_dv, + input rx_er, + input crs, + input col, + + output [7:0] rxd_ret, + output rx_dv_ret, + output rx_er_ret, + output crs_ret, + output col_ret ); + + reg [3:0] addr_wr,addr_wr_gray,awg_d1,awg_d2,addr_wr_gray_ret,awgr_d1,addr_wr_ungray,addr_rd; + + reg [11:0] buffer [0:15]; + integer i; + initial + for(i=0;i<16;i=i+1) + buffer[i] <= 0; + + reg [7:0] rxd_d1, rxd_d2; + reg rx_dv_d1,rx_er_d1,crs_d1,col_d1, rx_dv_d2,rx_er_d2,crs_d2,col_d2; + wire rx_dv_ret_adv; + reg rx_dv_ontime; + + always @(posedge rx_clk) + {col_d1,crs_d1,rx_er_d1,rx_dv_d1,rxd_d1} <= {col,crs,rx_er,rx_dv,rxd}; + + always @(posedge rx_clk) + {col_d2,crs_d2,rx_er_d2,rx_dv_d2,rxd_d2} <= {col_d1,crs_d1,rx_er_d1,rx_dv_d1,rxd_d1}; + + always @(posedge rx_clk) + buffer[addr_wr] <= {col_d2,crs_d2,rx_er_d2,rx_dv_d1,rxd_d2}; + + always @(posedge rx_clk or posedge rst) + if(rst) addr_wr <= 0; + else addr_wr <= addr_wr + 1; + + always @(posedge rx_clk) + begin + addr_wr_gray <= {addr_wr[3],^addr_wr[3:2],^addr_wr[2:1],^addr_wr[1:0]}; + awg_d1 <= addr_wr_gray; + awg_d2 <= awg_d1; + end + + always @(posedge tx_clk) + begin + addr_wr_gray_ret <= awg_d2; + awgr_d1 <= addr_wr_gray_ret; + addr_wr_ungray <= {awgr_d1[3],^awgr_d1[3:2],^awgr_d1[3:1],^awgr_d1[3:0]}; + end + + wire [3:0] addr_delta = addr_rd-addr_wr_ungray; + reg [1:0] direction; + localparam retard = 2'd0; + localparam good = 2'd1; + localparam advance = 2'd2; + localparam wayoff = 2'd3; + + always @* + case(addr_delta) + 4'd1, 4'd2, 4'd3, 4'd4, 4'd5 : direction <= retard; + 4'd15, 4'd14, 4'd13, 4'd12, 4'd11 : direction <= advance; + 4'd0 : direction <= good; + default : direction <= wayoff; + endcase // case(addr_delta) + + always @(posedge tx_clk or posedge rst) + if(rst) + addr_rd <= 0; + else if(rx_dv_ret_adv | rx_dv_ontime) + addr_rd <= addr_rd + 1; + else + case(direction) + retard : addr_rd <= addr_rd; + advance : addr_rd <= addr_rd + 2; + good : addr_rd <= addr_rd + 1; + wayoff : addr_rd <= addr_wr_ungray; + endcase // case(direction) + + assign {col_ret,crs_ret,rx_er_ret,rx_dv_ret_adv,rxd_ret} = buffer[addr_rd]; + always @(posedge tx_clk) + rx_dv_ontime <= rx_dv_ret_adv; + + assign rx_dv_ret = rx_dv_ontime; +endmodule // elastic_buffer diff --git a/eth/rtl/verilog/elastic_buffer_tb.v b/eth/rtl/verilog/elastic_buffer_tb.v new file mode 100644 index 000000000..757049ec4 --- /dev/null +++ b/eth/rtl/verilog/elastic_buffer_tb.v @@ -0,0 +1,66 @@ + +module elastic_buffer_tb; + + reg rx_clk = 0, tx_clk = 0, rst = 1; + + reg [7:0] rxd; + wire [7:0] rxd_ret; + reg rx_dv, rx_er, crs, col; + wire rx_dv_ret, rx_er_ret, crs_ret, col_ret; + + elastic_buffer elastic_buffer + (.rx_clk(rx_clk),.tx_clk(tx_clk),.rst(rst), + .rxd(rxd),.rx_dv(rx_dv),.rx_er(rx_er),.crs(crs),.col(col), + .rxd_ret(rxd_ret),.rx_dv_ret(rx_dv_ret),.rx_er_ret(rx_er_ret), + .crs_ret(crs_ret),.col_ret(col_ret) ); + + always #100 rx_clk = ~rx_clk; + always #101 tx_clk = ~tx_clk; + initial #950 rst = 0; + + initial + begin + {col,crs,rx_er,rx_dv,rxd} <= 0; + @(negedge rst); + @(posedge rx_clk); + + repeat (13) + begin + repeat (284) + @(posedge rx_clk); + SendPKT; + end + repeat (100) + @(posedge rx_clk); + $finish; + end // initial begin + + reg [7:0] rxd_ret_d1; + always @(posedge tx_clk) + rxd_ret_d1 <= rxd_ret; + + wire [7:0] diff = rxd_ret_d1 - rxd_ret; + + wire error = rx_dv_ret && (diff != 8'hFF); + + task SendPKT; + begin + {col,crs,rx_er,rx_dv,rxd} <= 0; + @(posedge rx_clk); + {col,crs,rx_er,rx_dv,rxd} <= {4'hF,8'd1}; + @(posedge rx_clk); + repeat (250) + begin + rxd <= rxd + 1; + @(posedge rx_clk); + end + {col,crs,rx_er,rx_dv,rxd} <= 0; + @(posedge rx_clk); + end + endtask // SendPKT + + initial begin + $dumpfile("elastic_buffer_tb.vcd"); + $dumpvars(0,elastic_buffer_tb); + end +endmodule // elastic_buffer_tb diff --git a/eth/rtl/verilog/eth_miim.v b/eth/rtl/verilog/eth_miim.v new file mode 100644 index 000000000..a15c94205 --- /dev/null +++ b/eth/rtl/verilog/eth_miim.v @@ -0,0 +1,470 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// eth_miim.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects/ethmac/ ////
+//// ////
+//// Author(s): ////
+//// - Igor Mohor (igorM@opencores.org) ////
+//// ////
+//// All additional information is avaliable in the Readme.txt ////
+//// file. ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: eth_miim.v,v $
+// Revision 1.3 2006/01/19 14:07:53 maverickist
+// verification is complete.
+//
+// Revision 1.1.1.1 2005/12/13 01:51:44 Administrator
+// no message
+//
+// Revision 1.4 2005/08/16 12:07:57 Administrator
+// no message
+//
+// Revision 1.3 2005/05/19 07:04:29 Administrator
+// no message
+//
+// Revision 1.2 2005/04/27 15:58:46 Administrator
+// no message
+//
+// Revision 1.1.1.1 2004/12/15 06:38:54 Administrator
+// no message
+//
+// Revision 1.5 2003/05/16 10:08:27 mohor
+// Busy was set 2 cycles too late. Reported by Dennis Scott.
+//
+// Revision 1.4 2002/08/14 18:32:10 mohor
+// - Busy signal was not set on time when scan status operation was performed
+// and clock was divided with more than 2.
+// - Nvalid remains valid two more clocks (was previously cleared too soon).
+//
+// Revision 1.3 2002/01/23 10:28:16 mohor
+// Link in the header changed.
+//
+// Revision 1.2 2001/10/19 08:43:51 mohor
+// eth_timescale.v changed to timescale.v This is done because of the
+// simulation of the few cores in a one joined project.
+//
+// Revision 1.1 2001/08/06 14:44:29 mohor
+// A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).
+// Include files fixed to contain no path.
+// File names and module names changed ta have a eth_ prologue in the name.
+// File eth_timescale.v is used to define timescale
+// All pin names on the top module are changed to contain _I, _O or _OE at the end.
+// Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O
+// and Mdo_OE. The bidirectional signal must be created on the top level. This
+// is done due to the ASIC tools.
+//
+// Revision 1.2 2001/08/02 09:25:31 mohor
+// Unconnected signals are now connected.
+//
+// Revision 1.1 2001/07/30 21:23:42 mohor
+// Directory structure changed. Files checked and joind together.
+//
+// Revision 1.3 2001/06/01 22:28:56 mohor
+// This files (MIIM) are fully working. They were thoroughly tested. The testbench is not updated.
+//
+//
+
+module eth_miim
+(
+ Clk,
+ Reset,
+ Divider,
+ NoPre,
+ CtrlData,
+ Rgad,
+ Fiad,
+ WCtrlData,
+ RStat,
+ ScanStat,
+ Mdio,
+ Mdc,
+ Busy,
+ Prsd,
+ LinkFail,
+ Nvalid,
+ WCtrlDataStart,
+ RStatStart,
+ UpdateMIIRX_DATAReg
+);
+
+input Clk; // Host Clock
+input Reset; // General Reset
+input [7:0] Divider; // Divider for the host clock
+input [15:0] CtrlData; // Control Data (to be written to the PHY reg.)
+input [4:0] Rgad; // Register Address (within the PHY)
+input [4:0] Fiad; // PHY Address
+input NoPre; // No Preamble (no 32-bit preamble)
+input WCtrlData; // Write Control Data operation
+input RStat; // Read Status operation
+input ScanStat; // Scan Status operation
+inout Mdio; // MII Management Data In
+
+output Mdc; // MII Management Data Clock
+
+output Busy; // Busy Signal
+output LinkFail; // Link Integrity Signal
+output Nvalid; // Invalid Status (qualifier for the valid scan result)
+
+output [15:0] Prsd; // Read Status Data (data read from the PHY)
+
+output WCtrlDataStart; // This signals resets the WCTRLDATA bit in the MIIM Command register
+output RStatStart; // This signal resets the RSTAT BIT in the MIIM Command register
+output UpdateMIIRX_DATAReg;// Updates MII RX_DATA register with read data
+
+//parameter Tp = 1;
+
+
+reg Nvalid;
+reg EndBusy_d; // Pre-end Busy signal
+reg EndBusy; // End Busy signal (stops the operation in progress)
+
+reg WCtrlData_q1; // Write Control Data operation delayed 1 Clk cycle
+reg WCtrlData_q2; // Write Control Data operation delayed 2 Clk cycles
+reg WCtrlData_q3; // Write Control Data operation delayed 3 Clk cycles
+reg WCtrlDataStart; // Start Write Control Data Command (positive edge detected)
+reg WCtrlDataStart_q;
+reg WCtrlDataStart_q1; // Start Write Control Data Command delayed 1 Mdc cycle
+reg WCtrlDataStart_q2; // Start Write Control Data Command delayed 2 Mdc cycles
+
+reg RStat_q1; // Read Status operation delayed 1 Clk cycle
+reg RStat_q2; // Read Status operation delayed 2 Clk cycles
+reg RStat_q3; // Read Status operation delayed 3 Clk cycles
+reg RStatStart; // Start Read Status Command (positive edge detected)
+reg RStatStart_q1; // Start Read Status Command delayed 1 Mdc cycle
+reg RStatStart_q2; // Start Read Status Command delayed 2 Mdc cycles
+
+reg ScanStat_q1; // Scan Status operation delayed 1 cycle
+reg ScanStat_q2; // Scan Status operation delayed 2 cycles
+reg SyncStatMdcEn; // Scan Status operation delayed at least cycles and synchronized to MdcEn
+
+wire WriteDataOp; // Write Data Operation (positive edge detected)
+wire ReadStatusOp; // Read Status Operation (positive edge detected)
+wire ScanStatusOp; // Scan Status Operation (positive edge detected)
+wire StartOp; // Start Operation (start of any of the preceding operations)
+wire EndOp; // End of Operation
+
+reg InProgress; // Operation in progress
+reg InProgress_q1; // Operation in progress delayed 1 Mdc cycle
+reg InProgress_q2; // Operation in progress delayed 2 Mdc cycles
+reg InProgress_q3; // Operation in progress delayed 3 Mdc cycles
+
+reg WriteOp; // Write Operation Latch (When asserted, write operation is in progress)
+reg [6:0] BitCounter; // Bit Counter
+
+
+wire [3:0] ByteSelect; // Byte Select defines which byte (preamble, data, operation, etc.) is loaded and shifted through the shift register.
+wire MdcEn; // MII Management Data Clock Enable signal is asserted for one Clk period before Mdc rises.
+wire ShiftedBit; // This bit is output of the shift register and is connected to the Mdo signal
+
+
+wire LatchByte1_d2;
+wire LatchByte0_d2;
+reg LatchByte1_d;
+reg LatchByte0_d;
+reg [1:0] LatchByte; // Latch Byte selects which part of Read Status Data is updated from the shift register
+
+reg UpdateMIIRX_DATAReg;// Updates MII RX_DATA register with read data
+
+wire Mdo; // MII Management Data Output
+wire MdoEn; // MII Management Data Output Enable
+wire Mdi;
+
+assign Mdi=Mdio;
+assign Mdio=MdoEn?Mdo:1'bz;
+
+
+
+// Generation of the EndBusy signal. It is used for ending the MII Management operation.
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ begin
+ EndBusy_d <= 1'b0;
+ EndBusy <= 1'b0;
+ end
+ else
+ begin
+ EndBusy_d <= ~InProgress_q2 & InProgress_q3;
+ EndBusy <= EndBusy_d;
+ end
+end
+
+
+// Update MII RX_DATA register
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ UpdateMIIRX_DATAReg <= 0;
+ else
+ if(EndBusy & ~WCtrlDataStart_q)
+ UpdateMIIRX_DATAReg <= 1;
+ else
+ UpdateMIIRX_DATAReg <= 0;
+end
+
+
+
+// Generation of the delayed signals used for positive edge triggering.
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ begin
+ WCtrlData_q1 <= 1'b0;
+ WCtrlData_q2 <= 1'b0;
+ WCtrlData_q3 <= 1'b0;
+
+ RStat_q1 <= 1'b0;
+ RStat_q2 <= 1'b0;
+ RStat_q3 <= 1'b0;
+
+ ScanStat_q1 <= 1'b0;
+ ScanStat_q2 <= 1'b0;
+ SyncStatMdcEn <= 1'b0;
+ end
+ else
+ begin
+ WCtrlData_q1 <= WCtrlData;
+ WCtrlData_q2 <= WCtrlData_q1;
+ WCtrlData_q3 <= WCtrlData_q2;
+
+ RStat_q1 <= RStat;
+ RStat_q2 <= RStat_q1;
+ RStat_q3 <= RStat_q2;
+
+ ScanStat_q1 <= ScanStat;
+ ScanStat_q2 <= ScanStat_q1;
+ if(MdcEn)
+ SyncStatMdcEn <= ScanStat_q2;
+ end
+end
+
+
+// Generation of the Start Commands (Write Control Data or Read Status)
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ begin
+ WCtrlDataStart <= 1'b0;
+ WCtrlDataStart_q <= 1'b0;
+ RStatStart <= 1'b0;
+ end
+ else
+ begin
+ if(EndBusy)
+ begin
+ WCtrlDataStart <= 1'b0;
+ RStatStart <= 1'b0;
+ end
+ else
+ begin
+ if(WCtrlData_q2 & ~WCtrlData_q3)
+ WCtrlDataStart <= 1'b1;
+ if(RStat_q2 & ~RStat_q3)
+ RStatStart <= 1'b1;
+ WCtrlDataStart_q <= WCtrlDataStart;
+ end
+ end
+end
+
+
+// Generation of the Nvalid signal (indicates when the status is invalid)
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ Nvalid <= 1'b0;
+ else
+ begin
+ if(~InProgress_q2 & InProgress_q3)
+ begin
+ Nvalid <= 1'b0;
+ end
+ else
+ begin
+ if(ScanStat_q2 & ~SyncStatMdcEn)
+ Nvalid <= 1'b1;
+ end
+ end
+end
+
+// Signals used for the generation of the Operation signals (positive edge)
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ begin
+ WCtrlDataStart_q1 <= 1'b0;
+ WCtrlDataStart_q2 <= 1'b0;
+
+ RStatStart_q1 <= 1'b0;
+ RStatStart_q2 <= 1'b0;
+
+ InProgress_q1 <= 1'b0;
+ InProgress_q2 <= 1'b0;
+ InProgress_q3 <= 1'b0;
+
+ LatchByte0_d <= 1'b0;
+ LatchByte1_d <= 1'b0;
+
+ LatchByte <= 2'b00;
+ end
+ else
+ begin
+ if(MdcEn)
+ begin
+ WCtrlDataStart_q1 <= WCtrlDataStart;
+ WCtrlDataStart_q2 <= WCtrlDataStart_q1;
+
+ RStatStart_q1 <= RStatStart;
+ RStatStart_q2 <= RStatStart_q1;
+
+ LatchByte[0] <= LatchByte0_d;
+ LatchByte[1] <= LatchByte1_d;
+
+ LatchByte0_d <= LatchByte0_d2;
+ LatchByte1_d <= LatchByte1_d2;
+
+ InProgress_q1 <= InProgress;
+ InProgress_q2 <= InProgress_q1;
+ InProgress_q3 <= InProgress_q2;
+ end
+ end
+end
+
+
+// Generation of the Operation signals
+assign WriteDataOp = WCtrlDataStart_q1 & ~WCtrlDataStart_q2;
+assign ReadStatusOp = RStatStart_q1 & ~RStatStart_q2;
+assign ScanStatusOp = SyncStatMdcEn & ~InProgress & ~InProgress_q1 & ~InProgress_q2;
+assign StartOp = WriteDataOp | ReadStatusOp | ScanStatusOp;
+
+// Busy
+reg Busy;
+always @ (posedge Clk or posedge Reset)
+ if (Reset)
+ Busy <=0;
+ else if(WCtrlData | WCtrlDataStart | RStat | RStatStart | SyncStatMdcEn | EndBusy | InProgress | InProgress_q3 | Nvalid)
+ Busy <=1;
+ else
+ Busy <=0;
+
+//assign Busy = WCtrlData | WCtrlDataStart | RStat | RStatStart | SyncStatMdcEn | EndBusy | InProgress | InProgress_q3 | Nvalid;
+
+
+// Generation of the InProgress signal (indicates when an operation is in progress)
+// Generation of the WriteOp signal (indicates when a write is in progress)
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ begin
+ InProgress <= 1'b0;
+ WriteOp <= 1'b0;
+ end
+ else
+ begin
+ if(MdcEn)
+ begin
+ if(StartOp)
+ begin
+ if(~InProgress)
+ WriteOp <= WriteDataOp;
+ InProgress <= 1'b1;
+ end
+ else
+ begin
+ if(EndOp)
+ begin
+ InProgress <= 1'b0;
+ WriteOp <= 1'b0;
+ end
+ end
+ end
+ end
+end
+
+
+
+// Bit Counter counts from 0 to 63 (from 32 to 63 when NoPre is asserted)
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ BitCounter[6:0] <= 7'h0;
+ else
+ begin
+ if(MdcEn)
+ begin
+ if(InProgress)
+ begin
+ if(NoPre & ( BitCounter == 7'h0 ))
+ BitCounter[6:0] <= 7'h21;
+ else
+ BitCounter[6:0] <= BitCounter[6:0] + 1'b1;
+ end
+ else
+ BitCounter[6:0] <= 7'h0;
+ end
+ end
+end
+
+
+// Operation ends when the Bit Counter reaches 63
+assign EndOp = BitCounter==63;
+
+assign ByteSelect[0] = InProgress & ((NoPre & (BitCounter == 7'h0)) | (~NoPre & (BitCounter == 7'h20)));
+assign ByteSelect[1] = InProgress & (BitCounter == 7'h28);
+assign ByteSelect[2] = InProgress & WriteOp & (BitCounter == 7'h30);
+assign ByteSelect[3] = InProgress & WriteOp & (BitCounter == 7'h38);
+
+
+// Latch Byte selects which part of Read Status Data is updated from the shift register
+assign LatchByte1_d2 = InProgress & ~WriteOp & BitCounter == 7'h37;
+assign LatchByte0_d2 = InProgress & ~WriteOp & BitCounter == 7'h3F;
+
+wire MdcEn_n;
+
+// Connecting the Clock Generator Module
+eth_clockgen clkgen(.Clk(Clk), .Reset(Reset), .Divider(Divider[7:0]), .MdcEn(MdcEn), .MdcEn_n(MdcEn_n), .Mdc(Mdc)
+ );
+
+// Connecting the Shift Register Module
+eth_shiftreg shftrg(.Clk(Clk), .Reset(Reset), .MdcEn_n(MdcEn_n), .Mdi(Mdi), .Fiad(Fiad), .Rgad(Rgad),
+ .CtrlData(CtrlData), .WriteOp(WriteOp), .ByteSelect(ByteSelect), .LatchByte(LatchByte),
+ .ShiftedBit(ShiftedBit), .Prsd(Prsd), .LinkFail(LinkFail)
+ );
+
+// Connecting the Output Control Module
+eth_outputcontrol outctrl(.Clk(Clk), .Reset(Reset), .MdcEn_n(MdcEn_n), .InProgress(InProgress),
+ .ShiftedBit(ShiftedBit), .BitCounter(BitCounter), .WriteOp(WriteOp), .NoPre(NoPre),
+ .Mdo(Mdo), .MdoEn(MdoEn)
+ );
+
+endmodule
diff --git a/eth/rtl/verilog/flow_ctrl_rx.v b/eth/rtl/verilog/flow_ctrl_rx.v new file mode 100644 index 000000000..7ded9e08b --- /dev/null +++ b/eth/rtl/verilog/flow_ctrl_rx.v @@ -0,0 +1,85 @@ +
+// RX side of flow control -- when we are running out of RX space, send a PAUSE
+
+module flow_ctrl_rx
+ (input rst,
+ //host processor
+ input pause_frame_send_en,
+ input [15:0] pause_quanta_set,
+ input [15:0] fc_hwmark,
+ input [15:0] fc_lwmark,
+ // From MAC_rx_ctrl
+ input rx_clk,
+ input [15:0] rx_fifo_space,
+ // MAC_tx_ctrl
+ input tx_clk,
+ output reg xoff_gen,
+ output reg xon_gen,
+ input xoff_gen_complete,
+ input xon_gen_complete
+ );
+
+ // ******************************************************************************
+ // Force our TX to send a PAUSE frame because our RX is nearly full
+ // ******************************************************************************
+
+ reg xon_int, xoff_int;
+ reg [21:0] countdown;
+
+ always @(posedge rx_clk or posedge rst)
+ if(rst)
+ begin
+ xon_int <= 0;
+ xoff_int <= 0;
+ end
+ else
+ begin
+ xon_int <= 0;
+ xoff_int <= 0;
+ if(pause_frame_send_en)
+ if(countdown == 0)
+ if(rx_fifo_space < fc_lwmark)
+ xoff_int <= 1;
+ else
+ ;
+ else
+ if(rx_fifo_space > fc_hwmark)
+ xon_int <= 1;
+ end // else: !if(rst)
+
+ reg xoff_int_d1, xon_int_d1;
+
+ always @(posedge rx_clk)
+ xon_int_d1 <= xon_int;
+ always @(posedge rx_clk)
+ xoff_int_d1 <= xoff_int;
+
+ always @ (posedge tx_clk or posedge rst)
+ if (rst)
+ xoff_gen <=0;
+ else if (xoff_gen_complete)
+ xoff_gen <=0;
+ else if (xoff_int | xoff_int_d1)
+ xoff_gen <=1;
+
+ always @ (posedge tx_clk or posedge rst)
+ if (rst)
+ xon_gen <=0;
+ else if (xon_gen_complete)
+ xon_gen <=0;
+ else if (xon_int | xon_int_d1)
+ xon_gen <=1;
+
+ wire [15:0] pq_reduced = pause_quanta_set - 2;
+
+ always @(posedge tx_clk or posedge rst)
+ if(rst)
+ countdown <= 0;
+ else if(xoff_gen)
+ countdown <= {pq_reduced,6'd0};
+ else if(xon_gen)
+ countdown <= 0;
+ else if(countdown != 0)
+ countdown <= countdown - 1;
+
+endmodule // flow_ctrl
diff --git a/eth/rtl/verilog/flow_ctrl_tx.v b/eth/rtl/verilog/flow_ctrl_tx.v new file mode 100644 index 000000000..9f7556de4 --- /dev/null +++ b/eth/rtl/verilog/flow_ctrl_tx.v @@ -0,0 +1,36 @@ +
+// TX side of flow control -- when other side sends PAUSE, we wait
+
+module flow_ctrl_tx
+ (input rst,
+ input tx_clk,
+ //host processor
+ input tx_pause_en,
+ // From MAC_rx_ctrl
+ input [15:0] pause_quanta,
+ input pause_quanta_val,
+ // MAC_tx_ctrl
+ output pause_apply,
+ input pause_quanta_sub);
+
+ // ******************************************************************************
+ // Inhibit our TX from transmitting because they sent us a PAUSE frame
+ // ******************************************************************************
+
+ reg [15:0] pause_quanta_counter;
+ reg pqval_d1, pqval_d2;
+
+ always @(posedge tx_clk) pqval_d1 <= pause_quanta_val;
+ always @(posedge tx_clk) pqval_d2 <= pqval_d1;
+
+ always @ (posedge tx_clk or posedge rst)
+ if (rst)
+ pause_quanta_counter <= 0;
+ else if (pqval_d1 & ~pqval_d2)
+ pause_quanta_counter <= pause_quanta;
+ else if((pause_quanta_counter!=0) & pause_quanta_sub)
+ pause_quanta_counter <= pause_quanta_counter - 1;
+
+ assign pause_apply = tx_pause_en & (pause_quanta_counter != 0);
+
+endmodule // flow_ctrl
diff --git a/eth/rtl/verilog/header.vh b/eth/rtl/verilog/header.vh new file mode 100644 index 000000000..ca0b580e4 --- /dev/null +++ b/eth/rtl/verilog/header.vh @@ -0,0 +1,7 @@ +`define MAC_SOURCE_REPLACE_EN 1
+`define MAC_TARGET_CHECK_EN 1
+`define MAC_BROADCAST_FILTER_EN 1
+`define MAC_TX_FF_DEPTH 9
+`define MAC_RX_FF_DEPTH 9
+`define MAC_TARGET_XILINX 1
+// `define MAC_TARGET_ALTERA 1
diff --git a/eth/rtl/verilog/miim/eth_clockgen.v b/eth/rtl/verilog/miim/eth_clockgen.v new file mode 100644 index 000000000..9da732f7f --- /dev/null +++ b/eth/rtl/verilog/miim/eth_clockgen.v @@ -0,0 +1,141 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// eth_clockgen.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects/ethmac/ ////
+//// ////
+//// Author(s): ////
+//// - Igor Mohor (igorM@opencores.org) ////
+//// ////
+//// All additional information is avaliable in the Readme.txt ////
+//// file. ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: eth_clockgen.v,v $
+// Revision 1.2 2005/12/13 12:54:49 maverickist
+// first simulation passed
+//
+// Revision 1.1.1.1 2005/12/13 01:51:45 Administrator
+// no message
+//
+// Revision 1.2 2005/04/27 15:58:45 Administrator
+// no message
+//
+// Revision 1.1.1.1 2004/12/15 06:38:54 Administrator
+// no message
+//
+// Revision 1.3 2002/01/23 10:28:16 mohor
+// Link in the header changed.
+//
+// Revision 1.2 2001/10/19 08:43:51 mohor
+// eth_timescale.v changed to timescale.v This is done because of the
+// simulation of the few cores in a one joined project.
+//
+// Revision 1.1 2001/08/06 14:44:29 mohor
+// A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).
+// Include files fixed to contain no path.
+// File names and module names changed ta have a eth_ prologue in the name.
+// File eth_timescale.v is used to define timescale
+// All pin names on the top module are changed to contain _I, _O or _OE at the end.
+// Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O
+// and Mdo_OE. The bidirectional signal must be created on the top level. This
+// is done due to the ASIC tools.
+//
+// Revision 1.1 2001/07/30 21:23:42 mohor
+// Directory structure changed. Files checked and joind together.
+//
+// Revision 1.3 2001/06/01 22:28:55 mohor
+// This files (MIIM) are fully working. They were thoroughly tested. The testbench is not updated.
+//
+//
+
+module eth_clockgen(Clk, Reset, Divider, MdcEn, MdcEn_n, Mdc);
+
+//parameter Tp=1;
+
+input Clk; // Input clock (Host clock)
+input Reset; // Reset signal
+input [7:0] Divider; // Divider (input clock will be divided by the Divider[7:0])
+
+output Mdc; // Output clock
+output MdcEn; // Enable signal is asserted for one Clk period before Mdc rises.
+output MdcEn_n; // Enable signal is asserted for one Clk period before Mdc falls.
+
+reg Mdc;
+reg [7:0] Counter;
+
+wire CountEq0;
+wire [7:0] CounterPreset;
+wire [7:0] TempDivider;
+
+
+assign TempDivider[7:0] = (Divider[7:0]<2)? 8'h02 : Divider[7:0]; // If smaller than 2
+assign CounterPreset[7:0] = (TempDivider[7:0]>>1) -1; // We are counting half of period
+
+
+// Counter counts half period
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ Counter[7:0] <= 8'h1;
+ else
+ begin
+ if(CountEq0)
+ begin
+ Counter[7:0] <= CounterPreset[7:0];
+ end
+ else
+ Counter[7:0] <= Counter - 8'h1;
+ end
+end
+
+
+// Mdc is asserted every other half period
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ Mdc <= 1'b0;
+ else
+ begin
+ if(CountEq0)
+ Mdc <= ~Mdc;
+ end
+end
+
+
+assign CountEq0 = Counter == 8'h0;
+assign MdcEn = CountEq0 & ~Mdc;
+assign MdcEn_n = CountEq0 & Mdc;
+
+endmodule
+
+
diff --git a/eth/rtl/verilog/miim/eth_outputcontrol.v b/eth/rtl/verilog/miim/eth_outputcontrol.v new file mode 100644 index 000000000..3df6c560a --- /dev/null +++ b/eth/rtl/verilog/miim/eth_outputcontrol.v @@ -0,0 +1,158 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// eth_outputcontrol.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects/ethmac/ ////
+//// ////
+//// Author(s): ////
+//// - Igor Mohor (igorM@opencores.org) ////
+//// ////
+//// All additional information is avaliable in the Readme.txt ////
+//// file. ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: eth_outputcontrol.v,v $
+// Revision 1.2 2005/12/13 12:54:49 maverickist
+// first simulation passed
+//
+// Revision 1.1.1.1 2005/12/13 01:51:45 Administrator
+// no message
+//
+// Revision 1.2 2005/04/27 15:58:46 Administrator
+// no message
+//
+// Revision 1.1.1.1 2004/12/15 06:38:54 Administrator
+// no message
+//
+// Revision 1.4 2002/07/09 20:11:59 mohor
+// Comment removed.
+//
+// Revision 1.3 2002/01/23 10:28:16 mohor
+// Link in the header changed.
+//
+// Revision 1.2 2001/10/19 08:43:51 mohor
+// eth_timescale.v changed to timescale.v This is done because of the
+// simulation of the few cores in a one joined project.
+//
+// Revision 1.1 2001/08/06 14:44:29 mohor
+// A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).
+// Include files fixed to contain no path.
+// File names and module names changed ta have a eth_ prologue in the name.
+// File eth_timescale.v is used to define timescale
+// All pin names on the top module are changed to contain _I, _O or _OE at the end.
+// Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O
+// and Mdo_OE. The bidirectional signal must be created on the top level. This
+// is done due to the ASIC tools.
+//
+// Revision 1.1 2001/07/30 21:23:42 mohor
+// Directory structure changed. Files checked and joind together.
+//
+// Revision 1.3 2001/06/01 22:28:56 mohor
+// This files (MIIM) are fully working. They were thoroughly tested. The testbench is not updated.
+//
+//
+
+module eth_outputcontrol(Clk, Reset, InProgress, ShiftedBit, BitCounter, WriteOp, NoPre, MdcEn_n, Mdo, MdoEn);
+
+input Clk; // Host Clock
+input Reset; // General Reset
+input WriteOp; // Write Operation Latch (When asserted, write operation is in progress)
+input NoPre; // No Preamble (no 32-bit preamble)
+input InProgress; // Operation in progress
+input ShiftedBit; // This bit is output of the shift register and is connected to the Mdo signal
+input [6:0] BitCounter; // Bit Counter
+input MdcEn_n; // MII Management Data Clock Enable signal is asserted for one Clk period before Mdc falls.
+
+output Mdo; // MII Management Data Output
+output MdoEn; // MII Management Data Output Enable
+
+wire SerialEn;
+
+reg MdoEn_2d;
+reg MdoEn_d;
+reg MdoEn;
+
+reg Mdo_2d;
+reg Mdo_d;
+reg Mdo; // MII Management Data Output
+
+
+
+// Generation of the Serial Enable signal (enables the serialization of the data)
+assign SerialEn = WriteOp & InProgress & ( BitCounter>31 | ( ( BitCounter == 0 ) & NoPre ) )
+ | ~WriteOp & InProgress & (( BitCounter>31 & BitCounter<46 ) | ( ( BitCounter == 0 ) & NoPre ));
+
+
+// Generation of the MdoEn signal
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ begin
+ MdoEn_2d <= 1'b0;
+ MdoEn_d <= 1'b0;
+ MdoEn <= 1'b0;
+ end
+ else
+ begin
+ if(MdcEn_n)
+ begin
+ MdoEn_2d <= SerialEn | InProgress & BitCounter<32;
+ MdoEn_d <= MdoEn_2d;
+ MdoEn <= MdoEn_d;
+ end
+ end
+end
+
+
+// Generation of the Mdo signal.
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ begin
+ Mdo_2d <= 1'b0;
+ Mdo_d <= 1'b0;
+ Mdo <= 1'b0;
+ end
+ else
+ begin
+ if(MdcEn_n)
+ begin
+ Mdo_2d <= ~SerialEn & BitCounter<32;
+ Mdo_d <= ShiftedBit | Mdo_2d;
+ Mdo <= Mdo_d;
+ end
+ end
+end
+
+
+
+endmodule
diff --git a/eth/rtl/verilog/miim/eth_shiftreg.v b/eth/rtl/verilog/miim/eth_shiftreg.v new file mode 100644 index 000000000..0b97bb7bc --- /dev/null +++ b/eth/rtl/verilog/miim/eth_shiftreg.v @@ -0,0 +1,159 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// eth_shiftreg.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects/ethmac/ ////
+//// ////
+//// Author(s): ////
+//// - Igor Mohor (igorM@opencores.org) ////
+//// ////
+//// All additional information is avaliable in the Readme.txt ////
+//// file. ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: eth_shiftreg.v,v $
+// Revision 1.2 2005/12/13 12:54:49 maverickist
+// first simulation passed
+//
+// Revision 1.1.1.1 2005/12/13 01:51:45 Administrator
+// no message
+//
+// Revision 1.2 2005/04/27 15:58:47 Administrator
+// no message
+//
+// Revision 1.1.1.1 2004/12/15 06:38:54 Administrator
+// no message
+//
+// Revision 1.5 2002/08/14 18:16:59 mohor
+// LinkFail signal was not latching appropriate bit.
+//
+// Revision 1.4 2002/03/02 21:06:01 mohor
+// LinkFail signal was not latching appropriate bit.
+//
+// Revision 1.3 2002/01/23 10:28:16 mohor
+// Link in the header changed.
+//
+// Revision 1.2 2001/10/19 08:43:51 mohor
+// eth_timescale.v changed to timescale.v This is done because of the
+// simulation of the few cores in a one joined project.
+//
+// Revision 1.1 2001/08/06 14:44:29 mohor
+// A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).
+// Include files fixed to contain no path.
+// File names and module names changed ta have a eth_ prologue in the name.
+// File eth_timescale.v is used to define timescale
+// All pin names on the top module are changed to contain _I, _O or _OE at the end.
+// Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O
+// and Mdo_OE. The bidirectional signal must be created on the top level. This
+// is done due to the ASIC tools.
+//
+// Revision 1.1 2001/07/30 21:23:42 mohor
+// Directory structure changed. Files checked and joind together.
+//
+// Revision 1.3 2001/06/01 22:28:56 mohor
+// This files (MIIM) are fully working. They were thoroughly tested. The testbench is not updated.
+//
+//
+
+module eth_shiftreg(Clk, Reset, MdcEn_n, Mdi, Fiad, Rgad, CtrlData, WriteOp, ByteSelect,
+ LatchByte, ShiftedBit, Prsd, LinkFail);
+
+
+input Clk; // Input clock (Host clock)
+input Reset; // Reset signal
+input MdcEn_n; // Enable signal is asserted for one Clk period before Mdc falls.
+input Mdi; // MII input data
+input [4:0] Fiad; // PHY address
+input [4:0] Rgad; // Register address (within the selected PHY)
+input [15:0]CtrlData; // Control data (data to be written to the PHY)
+input WriteOp; // The current operation is a PHY register write operation
+input [3:0] ByteSelect; // Byte select
+input [1:0] LatchByte; // Byte select for latching (read operation)
+
+output ShiftedBit; // Bit shifted out of the shift register
+output[15:0]Prsd; // Read Status Data (data read from the PHY)
+output LinkFail; // Link Integrity Signal
+
+reg [7:0] ShiftReg; // Shift register for shifting the data in and out
+reg [15:0]Prsd;
+reg LinkFail;
+
+
+
+
+// ShiftReg[7:0] :: Shift Register Data
+always @ (posedge Clk or posedge Reset)
+begin
+ if(Reset)
+ begin
+ ShiftReg[7:0] <= 8'h0;
+ Prsd[15:0] <= 16'h0;
+ LinkFail <= 1'b0;
+ end
+ else
+ begin
+ if(MdcEn_n)
+ begin
+ if(|ByteSelect)
+ begin
+ case (ByteSelect[3:0])
+ 4'h1 : ShiftReg[7:0] <= {2'b01, ~WriteOp, WriteOp, Fiad[4:1]};
+ 4'h2 : ShiftReg[7:0] <= {Fiad[0], Rgad[4:0], 2'b10};
+ 4'h4 : ShiftReg[7:0] <= CtrlData[15:8];
+ 4'h8 : ShiftReg[7:0] <= CtrlData[7:0];
+ default : ShiftReg[7:0] <= 8'h0;
+ endcase
+ end
+ else
+ begin
+ ShiftReg[7:0] <= {ShiftReg[6:0], Mdi};
+ if(LatchByte[0])
+ begin
+ Prsd[7:0] <= {ShiftReg[6:0], Mdi};
+ if(Rgad == 5'h01)
+ LinkFail <= ~ShiftReg[1]; // this is bit [2], because it is not shifted yet
+ end
+ else
+ begin
+ if(LatchByte[1])
+ Prsd[15:8] <= {ShiftReg[6:0], Mdi};
+ end
+ end
+ end
+ end
+end
+
+
+assign ShiftedBit = ShiftReg[7];
+
+
+endmodule
|