diff options
| author | Johnathan Corgan <jcorgan@corganenterprises.com> | 2009-10-01 11:00:25 -0700 |
|---|---|---|
| committer | Johnathan Corgan <jcorgan@corganenterprises.com> | 2009-10-01 11:07:59 -0700 |
| commit | 1ff74777e47f3a2edefc5154484f2bdcb86c1a13 (patch) | |
| tree | 04f94ef4f7f06a210f7532592829332c7f2621f0 /eth/rtl/verilog/miim/eth_shiftreg.v | |
| parent | 7b8f65256b5ea300187ebb6a359df2fa707a295d (diff) | |
| parent | 42fc55415af499980901c7787f44c7e74b4a9ce1 (diff) | |
| download | uhd-1ff74777e47f3a2edefc5154484f2bdcb86c1a13.tar.gz uhd-1ff74777e47f3a2edefc5154484f2bdcb86c1a13.tar.bz2 uhd-1ff74777e47f3a2edefc5154484f2bdcb86c1a13.zip | |
Merge branch 'new_eth' of http://gnuradio.org/git/matt into master
* 'new_eth' of http://gnuradio.org/git/matt: (42 commits)
Fix warnings, mostly from implicitly defined wires or unspecified widths
fullchip sim now compiles again, after moving eth and models over to new simple_gemac
remove unused opencores
remove debugging code
no idea where this came from, it shouldn't be here
Copied wb_1master back from quad radio
Remove old mac. Good riddance.
remove unused port
More xilinx fifos, more clean up of our fifos
might as well use a cascade fifo to help timing and give a little more capacity
fix a typo which caused tx glitches
Untested fixes for getting serdes onto the new fifo system. Compiles, at least
Implement Eth flow control using pause frames
parameterized fifo sizes, some reformatting
remove unused old style fifo
allow control of whether or not to honor flow control, adds some debug lines
debug the rx side
no longer used, replaced by newfifo version
remove special last_line adjustment from ethernet port
Firmware now inserts mac source address value in each frame.
...
Diffstat (limited to 'eth/rtl/verilog/miim/eth_shiftreg.v')
| -rw-r--r-- | eth/rtl/verilog/miim/eth_shiftreg.v | 159 |
1 files changed, 0 insertions, 159 deletions
diff --git a/eth/rtl/verilog/miim/eth_shiftreg.v b/eth/rtl/verilog/miim/eth_shiftreg.v deleted file mode 100644 index 0b97bb7bc..000000000 --- a/eth/rtl/verilog/miim/eth_shiftreg.v +++ /dev/null @@ -1,159 +0,0 @@ -//////////////////////////////////////////////////////////////////////
-//// ////
-//// eth_shiftreg.v ////
-//// ////
-//// This file is part of the Ethernet IP core project ////
-//// http://www.opencores.org/projects/ethmac/ ////
-//// ////
-//// Author(s): ////
-//// - Igor Mohor (igorM@opencores.org) ////
-//// ////
-//// All additional information is avaliable in the Readme.txt ////
-//// file. ////
-//// ////
-//////////////////////////////////////////////////////////////////////
-//// ////
-//// Copyright (C) 2001 Authors ////
-//// ////
-//// This source file may be used and distributed without ////
-//// restriction provided that this copyright statement is not ////
-//// removed from the file and that any derivative work contains ////
-//// the original copyright notice and the associated disclaimer. ////
-//// ////
-//// This source file is free software; you can redistribute it ////
-//// and/or modify it under the terms of the GNU Lesser General ////
-//// Public License as published by the Free Software Foundation; ////
-//// either version 2.1 of the License, or (at your option) any ////
-//// later version. ////
-//// ////
-//// This source is distributed in the hope that it will be ////
-//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
-//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
-//// PURPOSE. See the GNU Lesser General Public License for more ////
-//// details. ////
-//// ////
-//// You should have received a copy of the GNU Lesser General ////
-//// Public License along with this source; if not, download it ////
-//// from http://www.opencores.org/lgpl.shtml ////
-//// ////
-//////////////////////////////////////////////////////////////////////
-//
-// CVS Revision History
-//
-// $Log: eth_shiftreg.v,v $
-// Revision 1.2 2005/12/13 12:54:49 maverickist
-// first simulation passed
-//
-// Revision 1.1.1.1 2005/12/13 01:51:45 Administrator
-// no message
-//
-// Revision 1.2 2005/04/27 15:58:47 Administrator
-// no message
-//
-// Revision 1.1.1.1 2004/12/15 06:38:54 Administrator
-// no message
-//
-// Revision 1.5 2002/08/14 18:16:59 mohor
-// LinkFail signal was not latching appropriate bit.
-//
-// Revision 1.4 2002/03/02 21:06:01 mohor
-// LinkFail signal was not latching appropriate bit.
-//
-// Revision 1.3 2002/01/23 10:28:16 mohor
-// Link in the header changed.
-//
-// Revision 1.2 2001/10/19 08:43:51 mohor
-// eth_timescale.v changed to timescale.v This is done because of the
-// simulation of the few cores in a one joined project.
-//
-// Revision 1.1 2001/08/06 14:44:29 mohor
-// A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).
-// Include files fixed to contain no path.
-// File names and module names changed ta have a eth_ prologue in the name.
-// File eth_timescale.v is used to define timescale
-// All pin names on the top module are changed to contain _I, _O or _OE at the end.
-// Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O
-// and Mdo_OE. The bidirectional signal must be created on the top level. This
-// is done due to the ASIC tools.
-//
-// Revision 1.1 2001/07/30 21:23:42 mohor
-// Directory structure changed. Files checked and joind together.
-//
-// Revision 1.3 2001/06/01 22:28:56 mohor
-// This files (MIIM) are fully working. They were thoroughly tested. The testbench is not updated.
-//
-//
-
-module eth_shiftreg(Clk, Reset, MdcEn_n, Mdi, Fiad, Rgad, CtrlData, WriteOp, ByteSelect,
- LatchByte, ShiftedBit, Prsd, LinkFail);
-
-
-input Clk; // Input clock (Host clock)
-input Reset; // Reset signal
-input MdcEn_n; // Enable signal is asserted for one Clk period before Mdc falls.
-input Mdi; // MII input data
-input [4:0] Fiad; // PHY address
-input [4:0] Rgad; // Register address (within the selected PHY)
-input [15:0]CtrlData; // Control data (data to be written to the PHY)
-input WriteOp; // The current operation is a PHY register write operation
-input [3:0] ByteSelect; // Byte select
-input [1:0] LatchByte; // Byte select for latching (read operation)
-
-output ShiftedBit; // Bit shifted out of the shift register
-output[15:0]Prsd; // Read Status Data (data read from the PHY)
-output LinkFail; // Link Integrity Signal
-
-reg [7:0] ShiftReg; // Shift register for shifting the data in and out
-reg [15:0]Prsd;
-reg LinkFail;
-
-
-
-
-// ShiftReg[7:0] :: Shift Register Data
-always @ (posedge Clk or posedge Reset)
-begin
- if(Reset)
- begin
- ShiftReg[7:0] <= 8'h0;
- Prsd[15:0] <= 16'h0;
- LinkFail <= 1'b0;
- end
- else
- begin
- if(MdcEn_n)
- begin
- if(|ByteSelect)
- begin
- case (ByteSelect[3:0])
- 4'h1 : ShiftReg[7:0] <= {2'b01, ~WriteOp, WriteOp, Fiad[4:1]};
- 4'h2 : ShiftReg[7:0] <= {Fiad[0], Rgad[4:0], 2'b10};
- 4'h4 : ShiftReg[7:0] <= CtrlData[15:8];
- 4'h8 : ShiftReg[7:0] <= CtrlData[7:0];
- default : ShiftReg[7:0] <= 8'h0;
- endcase
- end
- else
- begin
- ShiftReg[7:0] <= {ShiftReg[6:0], Mdi};
- if(LatchByte[0])
- begin
- Prsd[7:0] <= {ShiftReg[6:0], Mdi};
- if(Rgad == 5'h01)
- LinkFail <= ~ShiftReg[1]; // this is bit [2], because it is not shifted yet
- end
- else
- begin
- if(LatchByte[1])
- Prsd[15:8] <= {ShiftReg[6:0], Mdi};
- end
- end
- end
- end
-end
-
-
-assign ShiftedBit = ShiftReg[7];
-
-
-endmodule
|