Moved usrp2 fpga files into usrp2 subdir.

1 files changed, 0 insertions, 49 deletions

diff --git a/control_lib/settings_bus.v b/control_lib/settings_bus.v
deleted file mode 100644
index d01a30ab4..000000000
--- a/control_lib/settings_bus.v
+++ /dev/null
@@ -1,49 +0,0 @@
-
-// Grab settings off the wishbone bus, send them out to our simpler bus on the fast clock
-
-module settings_bus
-  #(parameter AWIDTH=16, parameter DWIDTH=32)
-    (input wb_clk, 
-     input wb_rst, 
-     input [AWIDTH-1:0] wb_adr_i,
-     input [DWIDTH-1:0] wb_dat_i,
-     input wb_stb_i,
-     input wb_we_i,
-     output reg wb_ack_o,
-     input sys_clk,
-     output strobe,
-     output reg [7:0] addr,
-     output reg [31:0] data);
-
-   reg 	    stb_int, stb_int_d1;
-   
-   always @(posedge wb_clk)
-     if(wb_rst)
-       begin
-	  stb_int <= 1'b0;
-	  addr <= 8'd0;
-	  data <= 32'd0;
-       end
-     else if(wb_we_i & wb_stb_i)
-       begin
-	  stb_int <= 1'b1;
-	  addr <= wb_adr_i[9:2];
-	  data <= wb_dat_i;
-       end
-     else
-       stb_int <= 1'b0;
-
-   always @(posedge wb_clk)
-     if(wb_rst)
-       wb_ack_o <= 0;
-     else
-       wb_ack_o <= wb_stb_i & ~wb_ack_o;
-
-   always @(posedge wb_clk)
-     stb_int_d1 <= stb_int;
-
-   //assign strobe = stb_int & ~stb_int_d1;
-   assign strobe = stb_int & wb_ack_o;
-          
-endmodule // settings_bus
-