aboutsummaryrefslogtreecommitdiffstats
path: root/control_lib/buffer_int_tb.v
diff options
context:
space:
mode:
authorJohnathan Corgan <jcorgan@corganenterprises.com>2009-10-01 11:00:25 -0700
committerJohnathan Corgan <jcorgan@corganenterprises.com>2009-10-01 11:07:59 -0700
commit1ff74777e47f3a2edefc5154484f2bdcb86c1a13 (patch)
tree04f94ef4f7f06a210f7532592829332c7f2621f0 /control_lib/buffer_int_tb.v
parent7b8f65256b5ea300187ebb6a359df2fa707a295d (diff)
parent42fc55415af499980901c7787f44c7e74b4a9ce1 (diff)
downloaduhd-1ff74777e47f3a2edefc5154484f2bdcb86c1a13.tar.gz
uhd-1ff74777e47f3a2edefc5154484f2bdcb86c1a13.tar.bz2
uhd-1ff74777e47f3a2edefc5154484f2bdcb86c1a13.zip
Merge branch 'new_eth' of http://gnuradio.org/git/matt into master
* 'new_eth' of http://gnuradio.org/git/matt: (42 commits) Fix warnings, mostly from implicitly defined wires or unspecified widths fullchip sim now compiles again, after moving eth and models over to new simple_gemac remove unused opencores remove debugging code no idea where this came from, it shouldn't be here Copied wb_1master back from quad radio Remove old mac. Good riddance. remove unused port More xilinx fifos, more clean up of our fifos might as well use a cascade fifo to help timing and give a little more capacity fix a typo which caused tx glitches Untested fixes for getting serdes onto the new fifo system. Compiles, at least Implement Eth flow control using pause frames parameterized fifo sizes, some reformatting remove unused old style fifo allow control of whether or not to honor flow control, adds some debug lines debug the rx side no longer used, replaced by newfifo version remove special last_line adjustment from ethernet port Firmware now inserts mac source address value in each frame. ...
Diffstat (limited to 'control_lib/buffer_int_tb.v')
-rw-r--r--control_lib/buffer_int_tb.v447
1 files changed, 0 insertions, 447 deletions
diff --git a/control_lib/buffer_int_tb.v b/control_lib/buffer_int_tb.v
deleted file mode 100644
index 4fb5c6710..000000000
--- a/control_lib/buffer_int_tb.v
+++ /dev/null
@@ -1,447 +0,0 @@
-
-module buffer_int_tb ();
-
- reg clk = 0;
- reg rst = 1;
-
- initial #100 rst = 0;
- always #5 clk = ~clk;
-
- wire en, we;
- wire [8:0] addr;
- wire [31:0] fifo2buf, buf2fifo;
-
- wire [31:0] rd_dat_o;
- wire rd_sop_o, rd_eop_o;
- reg rd_done_i = 0, rd_error_i = 0, rd_read_i = 0;
-
- reg [31:0] wr_dat_i = 0;
- reg wr_write_i=0, wr_done_i = 0, wr_error_i = 0;
- wire wr_ready_o, wr_full_o;
-
- reg clear = 0, write = 0, read = 0;
- reg [8:0] firstline = 0, lastline = 0;
- wire [3:0] step = 1;
- wire [31:0] ctrl_word = {4'b0,3'b0,clear,write,read,step,lastline,firstline};
- reg go = 0;
- wire done, error;
-
- buffer_int buffer_int
- (.clk(clk),.rst(rst),
- .ctrl_word(ctrl_word),.go(go),
- .done(done),.error(error),
-
- // Buffer Interface
- .en_o(en),.we_o(we),.addr_o(addr),
- .dat_to_buf(fifo2buf),.dat_from_buf(buf2fifo),
-
- // Write FIFO Interface
- .wr_dat_i(wr_dat_i), .wr_write_i(wr_write_i), .wr_done_i(wr_done_i), .wr_error_i(wr_error_i),
- .wr_ready_o(wr_ready_o), .wr_full_o(wr_full_o),
-
- // Read FIFO Interface
- .rd_dat_o(rd_dat_o), .rd_read_i(rd_read_i), .rd_done_i(rd_done_i), .rd_error_i(rd_error_i),
- .rd_sop_o(rd_sop_o), .rd_eop_o(rd_eop_o)
- );
-
- reg ram_en = 0, ram_we = 0;
- reg [8:0] ram_addr = 0;
- reg [31:0] ram_data = 0;
-
- ram_2port #(.DWIDTH(32),.AWIDTH(9)) ram_2port
- (.clka(clk), .ena(ram_en), .wea(ram_we), .addra(ram_addr), .dia(ram_data), .doa(),
- .clkb(clk), .enb(en), .web(we), .addrb(addr), .dib(fifo2buf), .dob(buf2fifo) );
-
- initial
- begin
- @(negedge rst);
- @(posedge clk);
- FillRAM;
-
- ResetBuffer;
- SetBufferRead(5,10);
- $display("Testing full read, no wait states.");
- while(!rd_sop_o)
- @(posedge clk);
- ReadLines(6,0);
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferRead(5,10);
- $display("Testing full read, 2 wait states.");
- while(!rd_sop_o)
- @(posedge clk);
- ReadLines(6,2);
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferRead(5,10);
- $display("Testing full read, done ON the last.");
- while(!rd_sop_o)
- @(posedge clk);
- ReadLines(5,2);
- rd_done_i <= 1;
- ReadALine;
- rd_done_i <= 0;
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferRead(5,10);
- $display("Testing partial read, 0 wait states, then nothing after last.");
- while(!rd_sop_o)
- @(posedge clk);
- ReadLines(3,0);
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferRead(5,10);
- $display("Testing partial read, 0 wait states, then done after last.");
- while(!rd_sop_o)
- @(posedge clk);
- ReadLines(3,0);
- rd_done_i <= 1;
- @(posedge clk);
- rd_done_i <= 0;
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferRead(5,10);
- $display("Testing partial read, 0 wait states, then done at same time as last.");
- while(!rd_sop_o)
- @(posedge clk);
- ReadLines(2,0);
- rd_done_i <= 1;
- ReadALine;
- rd_done_i <= 0;
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferRead(5,10);
- $display("Testing partial read, 3 wait states, then error at same time as last.");
- while(!rd_sop_o)
- @(posedge clk);
- ReadLines(2,3);
- rd_error_i <= 1;
- ReadALine;
- rd_error_i <= 0;
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferRead(5,10);
- $display("Testing Reading too much, 3 wait states.");
- while(!rd_sop_o)
- @(posedge clk);
- ReadLines(9,3);
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferRead(500,511);
- $display("Testing full read, to the end of the buffer.");
- while(!rd_sop_o)
- @(posedge clk);
- ReadLines(12,0);
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferRead(0,511);
- $display("Testing full read, start to end of the buffer.");
- while(!rd_sop_o)
- @(posedge clk);
- ReadLines(512,0);
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferRead(505,3);
- $display("Testing full read, wraparound");
- while(!rd_sop_o)
- @(posedge clk);
- ReadLines(11,0);
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferWrite(10,15);
- $display("Testing Full Write, no wait states");
- while(!wr_ready_o)
- @(posedge clk);
- WriteLines(6,0,72);
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferWrite(18,23);
- $display("Testing Full Write, 1 wait states");
- while(!wr_ready_o)
- @(posedge clk);
- WriteLines(6,0,101);
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferWrite(27,40);
- $display("Testing Partial Write, 0 wait states");
- while(!wr_ready_o)
- @(posedge clk);
- WriteLines(6,0,201);
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferWrite(35,200);
- $display("Testing Partial Write, 0 wait states, then done");
- while(!wr_ready_o)
- @(posedge clk);
- WriteLines(6,0,301);
- wr_done_i <= 1;
- @(posedge clk);
- wr_done_i <= 0;
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferWrite(45,200);
- $display("Testing Partial Write, 0 wait states, then done and write simultaneously");
- while(!wr_ready_o)
- @(posedge clk);
- WriteLines(6,0,301);
- wr_done_i <= 1;
- WriteALine(400);
- wr_done_i <= 0;
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferWrite(55,200);
- $display("Testing Partial Write, 0 wait states, then error");
- while(!wr_ready_o)
- @(posedge clk);
- WriteLines(6,0,501);
- wr_error_i <= 1;
- @(posedge clk);
- wr_error_i <= 0;
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferRead(0,82);
- $display("Testing read after all the writes");
- while(!rd_sop_o)
- @(posedge clk);
- ReadLines(83,0);
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferWrite(508,4);
- $display("Testing wraparound write");
- while(!wr_ready_o)
- @(posedge clk);
- WriteLines(9,0,601);
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferRead(506,10);
- $display("Reading wraparound write");
- while(!rd_sop_o)
- @(posedge clk);
- ReadLines(17,0);
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferWrite(0,511);
- $display("Testing Whole Buffer write");
- while(!wr_ready_o)
- @(posedge clk);
- WriteLines(512,0,1000);
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferRead(0,511);
- $display("Reading Whole Buffer write");
- while(!rd_sop_o)
- @(posedge clk);
- ReadLines(512,0);
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferWrite(5,10);
- $display("Testing Write Too Many");
- while(!wr_ready_o)
- @(posedge clk);
- WriteLines(12,0,2000);
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferRead(0,15);
- $display("Reading back Write Too Many");
- while(!rd_sop_o)
- @(posedge clk);
- ReadLines(16,0);
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferWrite(15,20);
- $display("Testing Write One Less Than Full");
- while(!wr_ready_o)
- @(posedge clk);
- WriteLines(5,0,2000);
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- SetBufferRead(13,22);
- $display("Reading back Write One Less Than Full");
- while(!rd_sop_o)
- @(posedge clk);
- ReadLines(10,0);
- repeat (10)
- @(posedge clk);
-
- ResetBuffer;
- repeat(100)
- @(posedge clk);
- $finish;
- end
-
- always @(posedge clk)
- if(rd_read_i == 1'd1)
- $display("READ Buffer %d, rd_sop_o %d, rd_eop_o %d", rd_dat_o, rd_sop_o, rd_eop_o);
-
- always @(posedge clk)
- if(wr_write_i == 1'd1)
- $display("WRITE Buffer %d, wr_ready_o %d, wr_full_o %d", wr_dat_i, wr_ready_o, wr_full_o);
-
- initial begin
- $dumpfile("buffer_int_tb.vcd");
- $dumpvars(0,buffer_int_tb);
- end
-
- task FillRAM;
- begin
- ram_addr <= 0;
- ram_data <= 0;
- @(posedge clk);
- ram_en <= 1;
- ram_we <= 1;
- @(posedge clk);
- repeat (511)
- begin
- ram_addr <= ram_addr + 1;
- ram_data <= ram_data + 1;
- ram_en <= 1;
- ram_we <= 1;
- @(posedge clk);
- end
- ram_en <= 0;
- ram_we <= 0;
- @(posedge clk);
- $display("Filled the RAM");
- end
- endtask // FillRAM
-
- task ResetBuffer;
- begin
- clear <= 1; read <= 0; write <= 0;
- go <= 1;
- @(posedge clk);
- go <= 0;
- @(posedge clk);
- $display("Buffer Reset");
- end
- endtask // ClearBuffer
-
- task SetBufferWrite;
- input [8:0] start;
- input [8:0] stop;
- begin
- clear <= 0; read <= 0; write <= 1;
- firstline <= start;
- lastline <= stop;
- go <= 1;
- @(posedge clk);
- go <= 0;
- @(posedge clk);
- $display("Buffer Set for Write");
- end
- endtask // SetBufferWrite
-
- task SetBufferRead;
- input [8:0] start;
- input [8:0] stop;
- begin
- clear <= 0; read <= 1; write <= 0;
- firstline <= start;
- lastline <= stop;
- go <= 1;
- @(posedge clk);
- go <= 0;
- @(posedge clk);
- $display("Buffer Set for Read");
- end
- endtask // SetBufferRead
-
- task ReadALine;
- begin
- #1 rd_read_i <= 1;
- @(posedge clk);
- rd_read_i <= 0;
- end
- endtask // ReadALine
-
- task ReadLines;
- input [9:0] lines;
- input [7:0] wait_states;
- begin
- $display("Read Lines: Number %d, Wait States %d",lines,wait_states);
- repeat (lines)
- begin
- ReadALine;
- repeat (wait_states)
- @(posedge clk);
- end
- end
- endtask // ReadLines
-
- task WriteALine;
- input [31:0] value;
- begin
- #1 wr_write_i <= 1;
- wr_dat_i <= value;
- @(posedge clk);
- wr_write_i <= 0;
- end
- endtask // WriteALine
-
- task WriteLines;
- input [9:0] lines;
- input [7:0] wait_states;
- input [31:0] value;
- begin
- $display("Write Lines: Number %d, Wait States %d",lines,wait_states);
- repeat(lines)
- begin
- value <= value + 1;
- WriteALine(value);
- repeat(wait_states)
- @(posedge clk);
- end
- end
- endtask // WriteLines
-
-endmodule // buffer_int_tb
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-02 09:06:08 +0000