diff options
Diffstat (limited to 'kicad-dart-70/kicad-dart-70.kicad_pcb')
| -rw-r--r-- | kicad-dart-70/kicad-dart-70.kicad_pcb | 3800 |
1 files changed, 2086 insertions, 1714 deletions
diff --git a/kicad-dart-70/kicad-dart-70.kicad_pcb b/kicad-dart-70/kicad-dart-70.kicad_pcb index dabd629..2d91ad7 100644 --- a/kicad-dart-70/kicad-dart-70.kicad_pcb +++ b/kicad-dart-70/kicad-dart-70.kicad_pcb @@ -191,274 +191,277 @@ (net 101 "Net-(C86-Pad2)") (net 102 "Net-(C87-Pad2)") (net 103 "Net-(C90-Pad2)") - (net 104 "Net-(C100-Pad1)") - (net 105 "/70MHz VHF Frontend/VHF_RX") - (net 106 "Net-(C93-Pad1)") - (net 107 "/70MHz VHF Frontend/TX_FROM_MIX") - (net 108 "Net-(C94-Pad2)") - (net 109 "Net-(C96-Pad2)") - (net 110 "Net-(C100-Pad2)") - (net 111 "Net-(C101-Pad2)") - (net 112 "Net-(C102-Pad2)") - (net 113 "Net-(C103-Pad1)") - (net 114 "Net-(C104-Pad2)") - (net 115 "Net-(C106-Pad1)") - (net 116 "Net-(C107-Pad2)") - (net 117 "Net-(C108-Pad1)") - (net 118 "Net-(C109-Pad2)") - (net 119 "/70MHz VHF Frontend/+VTX_FE") - (net 120 "Net-(C111-Pad2)") - (net 121 "Net-(C112-Pad1)") - (net 122 "Net-(C112-Pad2)") - (net 123 "Net-(C114-Pad2)") - (net 124 "Net-(C115-Pad2)") - (net 125 "/70MHz VHF Frontend/12V") - (net 126 "Net-(C118-Pad2)") - (net 127 "Net-(C119-Pad1)") - (net 128 "Net-(C120-Pad1)") - (net 129 "Net-(C120-Pad2)") - (net 130 "Net-(C121-Pad1)") - (net 131 "Net-(C125-Pad2)") - (net 132 "Net-(C126-Pad1)") - (net 133 "Net-(C128-Pad1)") - (net 134 "Net-(C128-Pad2)") - (net 135 "Net-(C129-Pad1)") - (net 136 "/70MHz VHF Frontend/RX_TO_MIX") - (net 137 "/70MHz VHF Frontend/VHF_TX") - (net 138 "Net-(C136-Pad1)") - (net 139 "Net-(C136-Pad2)") - (net 140 "/PA 70MHz/12V") - (net 141 "VGG1") - (net 142 "Net-(C140-Pad1)") - (net 143 "Net-(C140-Pad2)") - (net 144 "Net-(C143-Pad1)") - (net 145 "Net-(C143-Pad2)") - (net 146 "Net-(C144-Pad1)") - (net 147 "Net-(C144-Pad2)") - (net 148 "VGG2") - (net 149 "Net-(C147-Pad1)") - (net 150 "Net-(C147-Pad2)") - (net 151 "Net-(C148-Pad1)") - (net 152 "Net-(C148-Pad2)") - (net 153 "Net-(C149-Pad1)") - (net 154 "Net-(C152-Pad1)") - (net 155 "/PA 70MHz/VG_5V") - (net 156 "Net-(C155-Pad2)") - (net 157 "Net-(C156-Pad2)") - (net 158 "Net-(C159-Pad2)") - (net 159 "Net-(C161-Pad2)") - (net 160 "Net-(C162-Pad2)") - (net 161 "/PA 70MHz/PA_OUT") - (net 162 "/Control on separate board/ENC_B") - (net 163 "/Control on separate board/ENC_A") - (net 164 "/Control on separate board/3.3V_UI") - (net 165 "Net-(C169-Pad1)") - (net 166 "Net-(C171-Pad1)") - (net 167 "Net-(C172-Pad1)") - (net 168 "Net-(C173-Pad2)") - (net 169 "/Control on separate board/CW_TONE") - (net 170 "Net-(C176-Pad1)") - (net 171 "/Control on separate board/5V") - (net 172 "Net-(D2-Pad1)") - (net 173 "Net-(D5-Pad1)") - (net 174 "Net-(D5-Pad2)") - (net 175 "Net-(D6-Pad1)") - (net 176 "Net-(D6-Pad2)") - (net 177 "Net-(D7-Pad2)") - (net 178 "Net-(D8-Pad2)") - (net 179 "Net-(D9-Pad1)") - (net 180 "Net-(D10-Pad3)") - (net 181 "Net-(D10-Pad1)") - (net 182 "Net-(D11-Pad1)") - (net 183 "Net-(D11-Pad3)") - (net 184 "Net-(D13-Pad2)") - (net 185 "Net-(D14-Pad2)") - (net 186 "Net-(D15-Pad2)") - (net 187 "Net-(D16-Pad1)") - (net 188 "Net-(D16-Pad2)") - (net 189 "Net-(D16-Pad3)") - (net 190 "Net-(D17-Pad3)") - (net 191 "Net-(D18-Pad1)") - (net 192 "Net-(D18-Pad2)") - (net 193 "Net-(D18-Pad3)") - (net 194 "Net-(D19-Pad3)") - (net 195 "Net-(D20-Pad2)") - (net 196 "Net-(D21-Pad2)") - (net 197 "/Control on separate board/STATUSn") - (net 198 "Net-(D23-Pad2)") - (net 199 "unconnected-(DS1-Pad1)") - (net 200 "unconnected-(DS1-Pad2)") - (net 201 "unconnected-(DS1-Pad3)") - (net 202 "unconnected-(DS1-Pad4)") - (net 203 "unconnected-(DS1-Pad5)") - (net 204 "unconnected-(DS1-Pad6)") - (net 205 "unconnected-(DS1-Pad7)") - (net 206 "unconnected-(DS1-Pad8)") - (net 207 "unconnected-(DS1-Pad9)") - (net 208 "unconnected-(DS1-Pad10)") - (net 209 "unconnected-(DS1-Pad11)") - (net 210 "unconnected-(DS1-Pad12)") - (net 211 "unconnected-(DS1-Pad13)") - (net 212 "unconnected-(DS1-Pad14)") - (net 213 "unconnected-(DS1-Pad15)") - (net 214 "unconnected-(DS1-Pad16)") - (net 215 "Net-(FB1-Pad2)") - (net 216 "Net-(FB3-Pad1)") - (net 217 "unconnected-(J3-PadNC)") - (net 218 "Net-(J3-PadR1)") - (net 219 "unconnected-(J3-PadR2)") - (net 220 "Net-(J3-PadS)") - (net 221 "Net-(J3-PadT)") - (net 222 "unconnected-(J3-PadTN)") - (net 223 "Net-(J4-PadR)") - (net 224 "Net-(J4-PadTN)") - (net 225 "/CW_RING") - (net 226 "/CW_TIP") - (net 227 "unconnected-(J5-PadTN)") - (net 228 "unconnected-(J6-Pad5)") - (net 229 "Net-(J7-Pad1)") - (net 230 "unconnected-(J7-Pad4)") - (net 231 "/Baseband/SPKR_DET") - (net 232 "/Control on separate board/CW_TIP") - (net 233 "/Control on separate board/CW_RING") - (net 234 "/Control on separate board/CW_KEYn") - (net 235 "/Control on separate board/MIC_PTTn") - (net 236 "/Control on separate board/EN_TX") - (net 237 "/Control on separate board/EN_RX") - (net 238 "/Control on separate board/S_METER") - (net 239 "/Control on separate board/SCL") - (net 240 "/Control on separate board/SDA") - (net 241 "/Control on separate board/MUTE_MICn") - (net 242 "/Control on separate board/SPKR_VOL") - (net 243 "unconnected-(J9-Pad6)") - (net 244 "/EN_VRX") - (net 245 "/EN_VTX") - (net 246 "/MIC_PTTn") - (net 247 "/Baseband/CW_KEYn") - (net 248 "/Baseband/CW_TONE") - (net 249 "unconnected-(J12-Pad3)") - (net 250 "/Baseband/SPKR_VOL") - (net 251 "/MUTE_MICn") - (net 252 "/SDA") - (net 253 "/SCL") - (net 254 "/S_METER") - (net 255 "/Baseband/VHF_IN") - (net 256 "/Baseband/VHF_OUT") - (net 257 "/70MHz VHF Frontend/EN_VRX") - (net 258 "/70MHz VHF Frontend/EN_VTX") - (net 259 "/PA 70MHz/PA_IN") - (net 260 "/PA 70MHz/EN_PA") - (net 261 "/CLK1") - (net 262 "Net-(J22-Pad2)") - (net 263 "+VTX") - (net 264 "Net-(J24-Pad2)") - (net 265 "unconnected-(J24-Pad4)") - (net 266 "unconnected-(J24-Pad5)") - (net 267 "Net-(J24-Pad7)") - (net 268 "/Control on separate board/DISP_LAT") - (net 269 "/Control on separate board/I2C2_SDA") - (net 270 "/Control on separate board/I2C2_SCL") - (net 271 "/Control on separate board/PC14") - (net 272 "/Control on separate board/PC13") - (net 273 "Net-(J32-Pad1)") - (net 274 "/Control on separate board/PA0") - (net 275 "/Control on separate board/USART1_TX") - (net 276 "/Control on separate board/USART1_RX") - (net 277 "/Control on separate board/PB15") - (net 278 "unconnected-(J34-Pad1)") - (net 279 "/Control on separate board/USB_DM") - (net 280 "/Control on separate board/USB_DP") - (net 281 "Net-(J34-Pad4)") - (net 282 "/Control on separate board/SWCLK") - (net 283 "/Control on separate board/SWDIO") - (net 284 "/Control on separate board/RESETn") - (net 285 "Net-(J36-Pad3)") - (net 286 "Net-(J36-Pad4)") - (net 287 "/LO1") - (net 288 "Net-(L14-Pad1)") - (net 289 "Net-(L15-Pad1)") - (net 290 "Net-(L19-Pad1)") - (net 291 "Net-(L21-Pad2)") - (net 292 "Net-(L23-Pad2)") - (net 293 "Net-(L25-Pad2)") - (net 294 "Net-(L39-Pad2)") - (net 295 "Net-(L40-Pad2)") - (net 296 "Net-(Q1-Pad1)") - (net 297 "Net-(Q2-Pad4)") - (net 298 "Net-(Q3-Pad4)") - (net 299 "Net-(Q6-Pad1)") - (net 300 "Net-(Q6-Pad2)") - (net 301 "Net-(Q7-Pad1)") - (net 302 "Net-(Q10-Pad1)") - (net 303 "Net-(Q10-Pad2)") - (net 304 "Net-(Q11-Pad1)") - (net 305 "Net-(Q11-Pad3)") - (net 306 "Net-(Q13-Pad1)") - (net 307 "Net-(Q14-Pad2)") - (net 308 "Net-(Q14-Pad3)") - (net 309 "Net-(Q16-Pad2)") - (net 310 "Net-(Q18-Pad2)") - (net 311 "Net-(Q20-Pad1)") - (net 312 "Net-(Q21-Pad1)") - (net 313 "Net-(Q23-Pad1)") - (net 314 "Net-(Q24-Pad4)") - (net 315 "/70MHz VHF Frontend/+9V_FE") - (net 316 "Net-(Q26-Pad4)") - (net 317 "/70MHz VHF Frontend/+VRX_FE") - (net 318 "Net-(Q27-Pad4)") - (net 319 "Net-(Q30-Pad4)") - (net 320 "Net-(R22-Pad2)") - (net 321 "Net-(R23-Pad2)") - (net 322 "Net-(R28-Pad2)") - (net 323 "Net-(R31-Pad1)") - (net 324 "Net-(R31-Pad2)") - (net 325 "Net-(R35-Pad1)") - (net 326 "Net-(R36-Pad1)") - (net 327 "Net-(R93-Pad1)") - (net 328 "Net-(R103-Pad2)") - (net 329 "Net-(R104-Pad2)") - (net 330 "Net-(R100-Pad1)") - (net 331 "Net-(R101-Pad1)") - (net 332 "Net-(R111-Pad2)") - (net 333 "Net-(R135-Pad1)") - (net 334 "Net-(R140-Pad1)") - (net 335 "Net-(J27-Pad1)") - (net 336 "Net-(R157-Pad1)") - (net 337 "Net-(R159-Pad1)") - (net 338 "Net-(R160-Pad1)") - (net 339 "Net-(R161-Pad2)") - (net 340 "/Control on separate board/BTN0") - (net 341 "/Control on separate board/BTN1") - (net 342 "/Control on separate board/BTN2") - (net 343 "/Control on separate board/BTN3") - (net 344 "Net-(R168-Pad1)") - (net 345 "/Control on separate board/ENC_BTN") - (net 346 "/Control on separate board/XTAL1") - (net 347 "/Control on separate board/XTAL2") - (net 348 "/Control on separate board/PWM_CW") - (net 349 "/Control on separate board/MUTE_SPKR") - (net 350 "Net-(R178-Pad2)") - (net 351 "Net-(R179-Pad2)") - (net 352 "Net-(R180-Pad2)") - (net 353 "/Control on separate board/BOOT0") - (net 354 "/Control on separate board/BOOT1") - (net 355 "unconnected-(T3-Pad2)") - (net 356 "unconnected-(T5-Pad2)") - (net 357 "unconnected-(TR1-Pad10)") - (net 358 "unconnected-(TR1-Pad15)") - (net 359 "unconnected-(TR2-Pad10)") - (net 360 "unconnected-(TR2-Pad15)") - (net 361 "Net-(U4-Pad3)") - (net 362 "unconnected-(U11-Pad14)") - (net 363 "unconnected-(U11-Pad40)") - (net 364 "Net-(D22-Pad2)") - (net 365 "unconnected-(T4-Pad2)") - (net 366 "Net-(D1-Pad1)") - (net 367 "Net-(J16-Pad5)") - (net 368 "unconnected-(J37-Pad6)") - (net 369 "unconnected-(J38-Pad6)") - (net 370 "/Baseband/3V3_MIC") - (net 371 "Net-(U5-Pad6)") + (net 104 "/70MHz VHF Frontend/VHF_RX") + (net 105 "Net-(C93-Pad1)") + (net 106 "/70MHz VHF Frontend/TX_FROM_MIX") + (net 107 "Net-(C94-Pad2)") + (net 108 "Net-(C96-Pad2)") + (net 109 "Net-(C100-Pad2)") + (net 110 "Net-(C101-Pad2)") + (net 111 "Net-(C102-Pad2)") + (net 112 "Net-(C103-Pad1)") + (net 113 "Net-(C104-Pad2)") + (net 114 "Net-(C106-Pad1)") + (net 115 "Net-(C107-Pad2)") + (net 116 "Net-(C108-Pad1)") + (net 117 "Net-(C109-Pad2)") + (net 118 "/70MHz VHF Frontend/+VTX_FE") + (net 119 "Net-(C111-Pad2)") + (net 120 "Net-(C112-Pad1)") + (net 121 "Net-(C112-Pad2)") + (net 122 "Net-(C114-Pad2)") + (net 123 "Net-(C115-Pad2)") + (net 124 "/70MHz VHF Frontend/12V") + (net 125 "Net-(C118-Pad2)") + (net 126 "Net-(C119-Pad1)") + (net 127 "Net-(C120-Pad1)") + (net 128 "Net-(C120-Pad2)") + (net 129 "Net-(C121-Pad1)") + (net 130 "Net-(C125-Pad2)") + (net 131 "Net-(C126-Pad1)") + (net 132 "Net-(C128-Pad1)") + (net 133 "Net-(C128-Pad2)") + (net 134 "Net-(C129-Pad1)") + (net 135 "/70MHz VHF Frontend/RX_TO_MIX") + (net 136 "/70MHz VHF Frontend/VHF_TX") + (net 137 "Net-(C136-Pad1)") + (net 138 "Net-(C136-Pad2)") + (net 139 "/PA 70MHz/12V") + (net 140 "VGG1") + (net 141 "Net-(C140-Pad1)") + (net 142 "Net-(C140-Pad2)") + (net 143 "Net-(C143-Pad1)") + (net 144 "Net-(C143-Pad2)") + (net 145 "Net-(C144-Pad1)") + (net 146 "Net-(C144-Pad2)") + (net 147 "VGG2") + (net 148 "Net-(C147-Pad1)") + (net 149 "Net-(C147-Pad2)") + (net 150 "Net-(C148-Pad1)") + (net 151 "Net-(C148-Pad2)") + (net 152 "Net-(C149-Pad1)") + (net 153 "Net-(C152-Pad1)") + (net 154 "/PA 70MHz/VG_5V") + (net 155 "Net-(C155-Pad2)") + (net 156 "Net-(C156-Pad2)") + (net 157 "Net-(C159-Pad2)") + (net 158 "Net-(C161-Pad2)") + (net 159 "Net-(C162-Pad2)") + (net 160 "/PA 70MHz/PA_OUT") + (net 161 "/Control on separate board/ENC_B") + (net 162 "/Control on separate board/ENC_A") + (net 163 "/Control on separate board/3.3V_UI") + (net 164 "Net-(C169-Pad1)") + (net 165 "Net-(C171-Pad1)") + (net 166 "Net-(C172-Pad1)") + (net 167 "Net-(C173-Pad2)") + (net 168 "/Control on separate board/CW_TONE") + (net 169 "Net-(C176-Pad1)") + (net 170 "/Control on separate board/5V") + (net 171 "Net-(D2-Pad1)") + (net 172 "Net-(D5-Pad1)") + (net 173 "Net-(D5-Pad2)") + (net 174 "Net-(D6-Pad1)") + (net 175 "Net-(D6-Pad2)") + (net 176 "Net-(D7-Pad2)") + (net 177 "Net-(D8-Pad2)") + (net 178 "Net-(D9-Pad1)") + (net 179 "Net-(D10-Pad3)") + (net 180 "Net-(D10-Pad1)") + (net 181 "Net-(D11-Pad1)") + (net 182 "Net-(D11-Pad3)") + (net 183 "Net-(D13-Pad2)") + (net 184 "Net-(D14-Pad2)") + (net 185 "Net-(D15-Pad2)") + (net 186 "Net-(D16-Pad1)") + (net 187 "Net-(D16-Pad2)") + (net 188 "Net-(D16-Pad3)") + (net 189 "Net-(D17-Pad3)") + (net 190 "Net-(D18-Pad1)") + (net 191 "Net-(D18-Pad2)") + (net 192 "Net-(D18-Pad3)") + (net 193 "Net-(D19-Pad3)") + (net 194 "Net-(D20-Pad2)") + (net 195 "Net-(D21-Pad2)") + (net 196 "/Control on separate board/STATUSn") + (net 197 "Net-(D23-Pad2)") + (net 198 "unconnected-(DS1-Pad1)") + (net 199 "unconnected-(DS1-Pad2)") + (net 200 "unconnected-(DS1-Pad3)") + (net 201 "unconnected-(DS1-Pad4)") + (net 202 "unconnected-(DS1-Pad5)") + (net 203 "unconnected-(DS1-Pad6)") + (net 204 "unconnected-(DS1-Pad7)") + (net 205 "unconnected-(DS1-Pad8)") + (net 206 "unconnected-(DS1-Pad9)") + (net 207 "unconnected-(DS1-Pad10)") + (net 208 "unconnected-(DS1-Pad11)") + (net 209 "unconnected-(DS1-Pad12)") + (net 210 "unconnected-(DS1-Pad13)") + (net 211 "unconnected-(DS1-Pad14)") + (net 212 "unconnected-(DS1-Pad15)") + (net 213 "unconnected-(DS1-Pad16)") + (net 214 "Net-(FB1-Pad2)") + (net 215 "Net-(FB3-Pad1)") + (net 216 "unconnected-(J3-PadNC)") + (net 217 "Net-(J3-PadR1)") + (net 218 "unconnected-(J3-PadR2)") + (net 219 "Net-(J3-PadS)") + (net 220 "Net-(J3-PadT)") + (net 221 "unconnected-(J3-PadTN)") + (net 222 "Net-(J4-PadR)") + (net 223 "Net-(J4-PadTN)") + (net 224 "/CW_RING") + (net 225 "/CW_TIP") + (net 226 "unconnected-(J5-PadTN)") + (net 227 "unconnected-(J6-Pad5)") + (net 228 "Net-(J7-Pad1)") + (net 229 "unconnected-(J7-Pad4)") + (net 230 "/Baseband/SPKR_DET") + (net 231 "/Control on separate board/CW_TIP") + (net 232 "/Control on separate board/CW_RING") + (net 233 "/Control on separate board/CW_KEYn") + (net 234 "/Control on separate board/MIC_PTTn") + (net 235 "/Control on separate board/EN_TX") + (net 236 "/Control on separate board/EN_RX") + (net 237 "/Control on separate board/S_METER") + (net 238 "/Control on separate board/SCL") + (net 239 "/Control on separate board/SDA") + (net 240 "/Control on separate board/MUTE_MICn") + (net 241 "/Control on separate board/SPKR_VOL") + (net 242 "unconnected-(J9-Pad6)") + (net 243 "/EN_VRX") + (net 244 "/EN_VTX") + (net 245 "/MIC_PTTn") + (net 246 "/Baseband/CW_KEYn") + (net 247 "/Baseband/CW_TONE") + (net 248 "unconnected-(J12-Pad3)") + (net 249 "/Baseband/SPKR_VOL") + (net 250 "/MUTE_MICn") + (net 251 "/SDA") + (net 252 "/SCL") + (net 253 "/S_METER") + (net 254 "/Baseband/VHF_IN") + (net 255 "/Baseband/VHF_OUT") + (net 256 "/70MHz VHF Frontend/EN_VRX") + (net 257 "/70MHz VHF Frontend/EN_VTX") + (net 258 "/PA 70MHz/PA_IN") + (net 259 "/PA 70MHz/EN_PA") + (net 260 "/CLK1") + (net 261 "Net-(J22-Pad2)") + (net 262 "+VTX") + (net 263 "Net-(J24-Pad2)") + (net 264 "unconnected-(J24-Pad4)") + (net 265 "unconnected-(J24-Pad5)") + (net 266 "Net-(J24-Pad7)") + (net 267 "/Control on separate board/DISP_LAT") + (net 268 "/Control on separate board/I2C2_SDA") + (net 269 "/Control on separate board/I2C2_SCL") + (net 270 "/Control on separate board/PC14") + (net 271 "/Control on separate board/PC13") + (net 272 "Net-(J32-Pad1)") + (net 273 "/Control on separate board/PA0") + (net 274 "/Control on separate board/USART1_TX") + (net 275 "/Control on separate board/USART1_RX") + (net 276 "/Control on separate board/PB15") + (net 277 "unconnected-(J34-Pad1)") + (net 278 "/Control on separate board/USB_DM") + (net 279 "/Control on separate board/USB_DP") + (net 280 "Net-(J34-Pad4)") + (net 281 "/Control on separate board/SWCLK") + (net 282 "/Control on separate board/SWDIO") + (net 283 "/Control on separate board/RESETn") + (net 284 "Net-(J36-Pad3)") + (net 285 "Net-(J36-Pad4)") + (net 286 "/LO1") + (net 287 "Net-(L14-Pad1)") + (net 288 "Net-(L15-Pad1)") + (net 289 "Net-(L19-Pad1)") + (net 290 "Net-(L21-Pad2)") + (net 291 "Net-(L23-Pad2)") + (net 292 "Net-(L25-Pad2)") + (net 293 "Net-(L39-Pad2)") + (net 294 "Net-(L40-Pad2)") + (net 295 "Net-(Q1-Pad1)") + (net 296 "Net-(Q2-Pad4)") + (net 297 "Net-(Q3-Pad4)") + (net 298 "Net-(Q6-Pad1)") + (net 299 "Net-(Q6-Pad2)") + (net 300 "Net-(Q7-Pad1)") + (net 301 "Net-(Q10-Pad1)") + (net 302 "Net-(Q10-Pad2)") + (net 303 "Net-(Q11-Pad1)") + (net 304 "Net-(Q11-Pad3)") + (net 305 "Net-(Q13-Pad1)") + (net 306 "Net-(Q14-Pad2)") + (net 307 "Net-(Q14-Pad3)") + (net 308 "Net-(Q16-Pad2)") + (net 309 "Net-(Q18-Pad2)") + (net 310 "Net-(Q20-Pad1)") + (net 311 "Net-(Q21-Pad1)") + (net 312 "Net-(Q23-Pad1)") + (net 313 "Net-(Q24-Pad4)") + (net 314 "/70MHz VHF Frontend/+9V_FE") + (net 315 "Net-(Q26-Pad4)") + (net 316 "/70MHz VHF Frontend/+VRX_FE") + (net 317 "Net-(Q27-Pad4)") + (net 318 "Net-(Q30-Pad4)") + (net 319 "Net-(R22-Pad2)") + (net 320 "Net-(R23-Pad2)") + (net 321 "Net-(R28-Pad2)") + (net 322 "Net-(R31-Pad1)") + (net 323 "Net-(R31-Pad2)") + (net 324 "Net-(R35-Pad1)") + (net 325 "Net-(R36-Pad1)") + (net 326 "Net-(R93-Pad1)") + (net 327 "Net-(R103-Pad2)") + (net 328 "Net-(R104-Pad2)") + (net 329 "Net-(R100-Pad1)") + (net 330 "Net-(R101-Pad1)") + (net 331 "Net-(R111-Pad2)") + (net 332 "Net-(R135-Pad1)") + (net 333 "Net-(R140-Pad1)") + (net 334 "Net-(J27-Pad1)") + (net 335 "Net-(R157-Pad1)") + (net 336 "Net-(R159-Pad1)") + (net 337 "Net-(R160-Pad1)") + (net 338 "Net-(R161-Pad2)") + (net 339 "/Control on separate board/BTN0") + (net 340 "/Control on separate board/BTN1") + (net 341 "/Control on separate board/BTN2") + (net 342 "/Control on separate board/BTN3") + (net 343 "Net-(R168-Pad1)") + (net 344 "/Control on separate board/ENC_BTN") + (net 345 "/Control on separate board/XTAL1") + (net 346 "/Control on separate board/XTAL2") + (net 347 "/Control on separate board/PWM_CW") + (net 348 "/Control on separate board/MUTE_SPKR") + (net 349 "Net-(R178-Pad2)") + (net 350 "Net-(R179-Pad2)") + (net 351 "Net-(R180-Pad2)") + (net 352 "/Control on separate board/BOOT0") + (net 353 "/Control on separate board/BOOT1") + (net 354 "unconnected-(T3-Pad2)") + (net 355 "unconnected-(T5-Pad2)") + (net 356 "unconnected-(TR1-Pad10)") + (net 357 "unconnected-(TR1-Pad15)") + (net 358 "unconnected-(TR2-Pad10)") + (net 359 "unconnected-(TR2-Pad15)") + (net 360 "Net-(U4-Pad3)") + (net 361 "unconnected-(U11-Pad14)") + (net 362 "unconnected-(U11-Pad40)") + (net 363 "Net-(D22-Pad2)") + (net 364 "unconnected-(T4-Pad2)") + (net 365 "Net-(D1-Pad1)") + (net 366 "Net-(J16-Pad5)") + (net 367 "unconnected-(J37-Pad6)") + (net 368 "unconnected-(J38-Pad6)") + (net 369 "/Baseband/3V3_MIC") + (net 370 "Net-(C38-Pad1)") + (net 371 "Net-(L22-Pad2)") + (net 372 "Net-(L27-Pad2)") + (net 373 "Net-(L29-Pad2)") + (net 374 "Net-(L31-Pad2)") (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 00c884a2-70c6-4c6a-9e03-9c803075a76a) @@ -494,9 +497,9 @@ (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 735b9fbb-893d-481c-abae-53cb2cb415eb)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp f2f68403-7e1d-4cde-b959-3157f10ca7d0)) (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 167 "Net-(C172-Pad1)") (pintype "passive") (tstamp 32623c44-60bf-406b-aaa1-d669b65aa396)) + (net 166 "Net-(C172-Pad1)") (pintype "passive") (tstamp 32623c44-60bf-406b-aaa1-d669b65aa396)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 169 "/Control on separate board/CW_TONE") (pintype "passive") (tstamp 91778f1e-ddd5-4e83-acd8-7a1eaba389ef)) + (net 168 "/Control on separate board/CW_TONE") (pintype "passive") (tstamp 91778f1e-ddd5-4e83-acd8-7a1eaba389ef)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -540,7 +543,7 @@ (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp d5ac1b48-d735-4896-bf88-f4e756c7a764)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 162 "/Control on separate board/ENC_B") (pintype "passive") (tstamp 5abbcbe1-b61f-44ce-8f9a-785e563d83d8)) + (net 161 "/Control on separate board/ENC_B") (pintype "passive") (tstamp 5abbcbe1-b61f-44ce-8f9a-785e563d83d8)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -550,7 +553,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 00f55973-fadb-4c6d-9e84-a398087dc518) - (at 200.312 -20.032) + (at 237.998 -5.588) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -583,7 +586,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 74bf9df2-5859-4390-8e71-7949be6e3638)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 314 "Net-(Q24-Pad4)") (pintype "passive") (tstamp 94b9ca0d-75a2-4d3a-bb64-23740254a30c)) + (net 313 "Net-(Q24-Pad4)") (pintype "passive") (tstamp 94b9ca0d-75a2-4d3a-bb64-23740254a30c)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -593,7 +596,7 @@ (footprint "Crystal:Crystal_HC49-U_Vertical" (layer "F.Cu") (tedit 5A1AD3B8) (tstamp 00fad4d6-020a-44c8-8346-ffb2dc9c593c) - (at 213.065 63.81) + (at 51.663 155.25) (descr "Crystal THT HC-49/U http://5hertz.com/pdfs/04404_D.pdf") (tags "THT crystalHC-49/U") (property "MPN" "ECS-110.5-32-1X") @@ -643,7 +646,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 01ab605a-d99d-4866-a371-fa1d58ba32dc) - (at 365.954 -45.614) + (at 160.595 210.291) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -674,9 +677,9 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 6f89f1a9-d4c2-4f30-8301-0ed3e72aa5c0)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp cab9dae3-5ada-441c-ace2-0aab0ca923cb)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 141 "VGG1") (pintype "passive") (tstamp c7cc5685-cf16-42b9-b1f2-e7d864987be2)) + (net 140 "VGG1") (pintype "passive") (tstamp c7cc5685-cf16-42b9-b1f2-e7d864987be2)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 196 "Net-(D21-Pad2)") (pintype "passive") (tstamp 2f74f4e0-8dd1-4ce0-8afa-ab6618c1b110)) + (net 195 "Net-(D21-Pad2)") (pintype "passive") (tstamp 2f74f4e0-8dd1-4ce0-8afa-ab6618c1b110)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -771,21 +774,21 @@ (pad "2" smd rect (at -2.2 -0.5) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 25 "Net-(C20-Pad1)") (pinfunction "VCAIN") (pintype "input") (tstamp c95ec06d-6b57-4404-9d34-0f7917ab6405)) (pad "3" smd rect (at -2.2 0) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") - (net 251 "/MUTE_MICn") (pinfunction "~{SD}") (pintype "input") (tstamp 0a89c5b2-1110-46d5-a2c3-e04f4d2e20a2)) + (net 250 "/MUTE_MICn") (pinfunction "~{SD}") (pintype "input") (tstamp 0a89c5b2-1110-46d5-a2c3-e04f4d2e20a2)) (pad "4" smd rect (at -2.2 0.5) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 26 "Net-(C20-Pad2)") (pinfunction "BUFOUT") (pintype "output") (tstamp 9d5d8685-8633-4950-b67c-ba5f6782c0d5)) (pad "5" smd rect (at -2.2 1) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 24 "Net-(C19-Pad2)") (pinfunction "IN+") (pintype "input") (tstamp 115937cf-7837-4a87-b00b-6abf4ea48c72)) (pad "6" smd rect (at 2.2 1) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") - (net 371 "Net-(U5-Pad6)") (pinfunction "AVG") (pintype "passive") (tstamp 616c679e-55b3-4b98-b697-c910d0c06056)) + (net 370 "Net-(C38-Pad1)") (pinfunction "AVG") (pintype "passive") (tstamp 616c679e-55b3-4b98-b697-c910d0c06056)) (pad "7" smd rect (at 2.2 0.5) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") - (net 320 "Net-(R22-Pad2)") (pinfunction "GATE") (pintype "passive") (tstamp 367603f8-7f70-41e2-ba3c-c32f0eded671)) + (net 319 "Net-(R22-Pad2)") (pinfunction "GATE") (pintype "passive") (tstamp 367603f8-7f70-41e2-ba3c-c32f0eded671)) (pad "8" smd rect (at 2.2 0) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") - (net 321 "Net-(R23-Pad2)") (pinfunction "COMP") (pintype "passive") (tstamp f0c802fd-4c2f-4369-9b97-cf5bc2cb43c2)) + (net 320 "Net-(R23-Pad2)") (pinfunction "COMP") (pintype "passive") (tstamp f0c802fd-4c2f-4369-9b97-cf5bc2cb43c2)) (pad "9" smd rect (at 2.2 -0.5) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 42 "Net-(C39-Pad2)") (pinfunction "VOUT") (pintype "output") (tstamp 04d53a4e-fa26-47dc-8e71-0132cc1f7cdb)) (pad "10" smd rect (at 2.2 -1) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") - (net 370 "/Baseband/3V3_MIC") (pinfunction "V+") (pintype "power_in") (tstamp d52b6010-4bc3-46f6-8364-4586fea583dd)) + (net 369 "/Baseband/3V3_MIC") (pinfunction "V+") (pintype "power_in") (tstamp d52b6010-4bc3-46f6-8364-4586fea583dd)) (model "${KICAD6_3DMODEL_DIR}/Package_SO.3dshapes/MSOP-10_3x3mm_P0.5mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -852,17 +855,17 @@ (pad "2" smd roundrect (at -3.125 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 9 "+5VA") (pinfunction "Pin_2") (pintype "passive") (tstamp cff7b72c-96b5-439e-a00b-a2cfa009cd60)) (pad "3" smd roundrect (at -1.875 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 244 "/EN_VRX") (pinfunction "Pin_3") (pintype "passive") (tstamp 44fe7928-072b-4776-9f27-4bf3063f64a3)) + (net 243 "/EN_VRX") (pinfunction "Pin_3") (pintype "passive") (tstamp 44fe7928-072b-4776-9f27-4bf3063f64a3)) (pad "4" smd roundrect (at -0.625 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 245 "/EN_VTX") (pinfunction "Pin_4") (pintype "passive") (tstamp 331a82c3-cd64-4677-9947-19547a37ea6d)) + (net 244 "/EN_VTX") (pinfunction "Pin_4") (pintype "passive") (tstamp 331a82c3-cd64-4677-9947-19547a37ea6d)) (pad "5" smd roundrect (at 0.625 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 246 "/MIC_PTTn") (pinfunction "Pin_5") (pintype "passive") (tstamp 9895cb7f-53f4-425d-a1c2-dac97d944c34)) + (net 245 "/MIC_PTTn") (pinfunction "Pin_5") (pintype "passive") (tstamp 9895cb7f-53f4-425d-a1c2-dac97d944c34)) (pad "6" smd roundrect (at 1.875 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 247 "/Baseband/CW_KEYn") (pinfunction "Pin_6") (pintype "passive") (tstamp b8808a71-c75d-44da-b16b-1559c3d02f10)) + (net 246 "/Baseband/CW_KEYn") (pinfunction "Pin_6") (pintype "passive") (tstamp b8808a71-c75d-44da-b16b-1559c3d02f10)) (pad "7" smd roundrect (at 3.125 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 225 "/CW_RING") (pinfunction "Pin_7") (pintype "passive") (tstamp 64ab92b3-2e85-4930-aa0b-ef160f8da814)) + (net 224 "/CW_RING") (pinfunction "Pin_7") (pintype "passive") (tstamp 64ab92b3-2e85-4930-aa0b-ef160f8da814)) (pad "8" smd roundrect (at 4.375 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 226 "/CW_TIP") (pinfunction "Pin_8") (pintype "passive") (tstamp deca51b3-8b4b-4988-adb0-acab4e0e2fca)) + (net 225 "/CW_TIP") (pinfunction "Pin_8") (pintype "passive") (tstamp deca51b3-8b4b-4988-adb0-acab4e0e2fca)) (pad "MP" smd roundrect (at -6.925 0.5 270) (size 2.1 3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.119048) (tstamp e0ce5aeb-8516-4d2b-80df-2a1d5bb6b06c)) (pad "MP" smd roundrect (at 6.925 0.5 270) (size 2.1 3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.119048) (tstamp ec536414-912a-4ba9-b5ea-9f3cb80be913)) (model "${KICAD6_3DMODEL_DIR}/Connector_Molex.3dshapes/Molex_PicoBlade_53261-0871_1x08-1MP_P1.25mm_Horizontal.wrl" @@ -874,7 +877,7 @@ (footprint "mpb:four_4mm_pads_narrow" (layer "F.Cu") (tedit 60603814) (tstamp 029b63b1-1e12-4250-ba81-8c806ffe0fd2) - (at 318.349 -37.179) + (at 112.99 218.726) (property "Need_order" "0") (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") @@ -895,13 +898,13 @@ (fp_line (start -5.95 -1.85) (end -1.95 -1.85) (layer "F.SilkS") (width 0.15) (tstamp 9f86de06-def9-4022-91c8-fc89501f344c)) (fp_line (start -5.95 -1.85) (end -5.95 1.65) (layer "F.SilkS") (width 0.15) (tstamp a0304b0e-f616-4d11-8dda-1f7600273878)) (pad "1" smd rect locked (at -4.2 -4.1) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 138 "Net-(C136-Pad1)") (pinfunction "AA") (pintype "passive") (tstamp 2745102a-80c1-4fa4-b091-30f997abd690)) + (net 137 "Net-(C136-Pad1)") (pinfunction "AA") (pintype "passive") (tstamp 2745102a-80c1-4fa4-b091-30f997abd690)) (pad "2" smd rect locked (at -4.2 3.9) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "AB") (pintype "passive") (tstamp 8c814388-326a-4f92-a626-3495bedc10a9)) (pad "3" smd rect locked (at 4.2 -4.1) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 142 "Net-(C140-Pad1)") (pinfunction "SA") (pintype "passive") (tstamp 2a219451-e021-4b08-8bab-6a16f6bc12f4)) + (net 141 "Net-(C140-Pad1)") (pinfunction "SA") (pintype "passive") (tstamp 2a219451-e021-4b08-8bab-6a16f6bc12f4)) (pad "4" smd rect locked (at 4.2 3.9) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 143 "Net-(C140-Pad2)") (pinfunction "SB") (pintype "passive") (tstamp ff14033e-bd43-4edf-bb2a-a8f15b0efa2a)) + (net 142 "Net-(C140-Pad2)") (pinfunction "SB") (pintype "passive") (tstamp ff14033e-bd43-4edf-bb2a-a8f15b0efa2a)) ) (footprint "Potentiometer_SMD:Potentiometer_Bourns_3214W_Vertical" (layer "F.Cu") @@ -947,9 +950,9 @@ (fp_line (start -2.4 1.75) (end 2.4 1.75) (layer "F.Fab") (width 0.1) (tstamp f6c7e822-f4e8-4d0c-9c75-8aa63a838437)) (fp_circle (center -1.2 0.65) (end -0.45 0.65) (layer "F.Fab") (width 0.1) (fill none) (tstamp 0276391d-b76b-43bf-85d1-e8f357f1e0d5)) (pad "1" smd rect (at 1.25 -1.45 270) (size 1.3 1.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 300 "Net-(Q6-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 2a339bba-3c38-4eb1-ba3e-f80608becb1b)) + (net 299 "Net-(Q6-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 2a339bba-3c38-4eb1-ba3e-f80608becb1b)) (pad "2" smd rect (at 0 1.45 270) (size 2 1.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 254 "/S_METER") (pinfunction "2") (pintype "passive") (tstamp a6b09f6f-11ca-4052-83c9-8cb2c4979c09)) + (net 253 "/S_METER") (pinfunction "2") (pintype "passive") (tstamp a6b09f6f-11ca-4052-83c9-8cb2c4979c09)) (pad "3" smd rect (at -1.25 -1.45 270) (size 1.3 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "3") (pintype "passive") (tstamp 8c133062-916b-465c-b2d0-a42a22902be6)) (model "${KICAD6_3DMODEL_DIR}/Potentiometer_SMD.3dshapes/Potentiometer_Bourns_3214W_Vertical.wrl" @@ -1015,7 +1018,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 043dd1fb-4672-425e-90db-df856ecafed0) - (at 228.572 -49.332) + (at 246.507 -18.669 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -1045,10 +1048,10 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c5a0e843-5372-41e4-9234-8db871f60b59)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e4a4d17a-09df-403f-9092-7d15bd00b350)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp fe14750e-1952-42ad-805e-2eeef2a7193f)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 131 "Net-(C125-Pad2)") (pintype "passive") (tstamp 32bae6fd-fa1f-4bf5-a180-e05cd812892b)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 119 "/70MHz VHF Frontend/+VTX_FE") (pintype "passive") (tstamp a2ceab43-4a9a-4daf-8c7c-f78a30a15560)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 130 "Net-(C125-Pad2)") (pintype "passive") (tstamp 32bae6fd-fa1f-4bf5-a180-e05cd812892b)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 118 "/70MHz VHF Frontend/+VTX_FE") (pintype "passive") (tstamp a2ceab43-4a9a-4daf-8c7c-f78a30a15560)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -1058,7 +1061,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 045df471-1450-4e8a-85fb-ba205d04ac79) - (at 214.062 -26.922) + (at 103.826 -16.508) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -1092,7 +1095,7 @@ (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp d8a66c91-d26a-4482-b377-fa36167e47f8)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 122 "Net-(C112-Pad2)") (pintype "passive") (tstamp debb823c-2a23-4c9d-95ab-db78e589688f)) + (net 121 "Net-(C112-Pad2)") (pintype "passive") (tstamp debb823c-2a23-4c9d-95ab-db78e589688f)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -1102,7 +1105,7 @@ (footprint "Package_TO_SOT_SMD:SOT-223-3_TabPin2" (layer "F.Cu") (tedit 5A02FF57) (tstamp 0501052a-3247-4ce2-ba10-308ad4421455) - (at 25.19 -31.47) + (at -107.82 68.636) (descr "module CMS SOT223 4 pins") (tags "CMS SOT") (property "MPN" "LM1117IMP-ADJ") @@ -1184,9 +1187,9 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 549514ed-35ba-4148-8268-c82c56000a59)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 7ac667b9-50f2-437a-871f-dc27f2385f01)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 263 "+VTX") (pintype "passive") (tstamp 7d6d986e-5734-458f-b90b-f09aee6274ef)) + (net 262 "+VTX") (pintype "passive") (tstamp 7d6d986e-5734-458f-b90b-f09aee6274ef)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 182 "Net-(D11-Pad1)") (pintype "passive") (tstamp 678d7616-a519-4120-a67f-4094cbd472ae)) + (net 181 "Net-(D11-Pad1)") (pintype "passive") (tstamp 678d7616-a519-4120-a67f-4094cbd472ae)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -1240,7 +1243,7 @@ (footprint "Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 0638de7b-43b8-42b8-8675-21acbe29ddc0) - (at 111.5 -58.39) + (at -21.51 41.716) (descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "TAJA106K016RNJ") @@ -1285,7 +1288,7 @@ (footprint "Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 065a09d8-ea20-4402-881e-140b09654fa8) - (at 99 -46.59) + (at -34.01 53.516) (descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "stash tantalum") @@ -1330,7 +1333,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 06875b2e-3c91-41cb-9c4c-3983baaaaad3) - (at 204.662 -21.462) + (at 249.936 -9.271 -90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -1338,15 +1341,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/0464213f-32dd-49ea-abac-449105faed2c") (attr smd) - (fp_text reference "R127" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R127" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 4bcc5e4f-dd22-4166-ad6d-4273e73ee12b) ) - (fp_text value "4.7k" (at 0 1.43) (layer "F.Fab") + (fp_text value "4.7k" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 265f8c91-3982-4a0d-b67f-df77c5b2d03e) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp a20f5b7a-7e4d-45ad-8cc2-cd632951586d) ) @@ -1360,10 +1363,10 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 14d00981-4b49-45ee-a8d1-b33ad52e4459)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 1835c9f2-0c27-406c-8cda-993ec6a76f86)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp f8ea9fdb-636f-4651-b105-1b82d3409f03)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 134 "Net-(C128-Pad2)") (pintype "passive") (tstamp adeb41e8-0a55-43fd-9521-d937353b7067)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 129 "Net-(C120-Pad2)") (pintype "passive") (tstamp c47a5bb6-ba13-400d-919b-4df1fb604eec)) + (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 133 "Net-(C128-Pad2)") (pintype "passive") (tstamp adeb41e8-0a55-43fd-9521-d937353b7067)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 128 "Net-(C120-Pad2)") (pintype "passive") (tstamp c47a5bb6-ba13-400d-919b-4df1fb604eec)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -1373,7 +1376,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 07319bbc-9574-4653-9958-6cd88528b92f) - (at 344.974 -32.604) + (at 139.615 223.301) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GQM2195C2E220JB2D") @@ -1405,9 +1408,9 @@ (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp b431fd2c-d50d-4732-9ca9-0d33bb153a51)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp fbb5e686-3636-4908-9b24-d61af3833fb6)) (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 142 "Net-(C140-Pad1)") (pintype "passive") (tstamp 9fff174d-2639-4958-badb-1522ba2e783b)) + (net 141 "Net-(C140-Pad1)") (pintype "passive") (tstamp 9fff174d-2639-4958-badb-1522ba2e783b)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 143 "Net-(C140-Pad2)") (pintype "passive") (tstamp 4a3ab61b-1dd2-46fd-b8ab-1ce7071b53f1)) + (net 142 "Net-(C140-Pad2)") (pintype "passive") (tstamp 4a3ab61b-1dd2-46fd-b8ab-1ce7071b53f1)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -1417,7 +1420,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 076524af-a0d0-47d0-9ae3-4ddb353736f3) - (at 369.114 -55.524) + (at 163.755 200.381) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GQM2195C2E220JB2D") @@ -1449,9 +1452,9 @@ (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 5e3342fc-8078-4029-901d-2433b6a077fc)) (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 8c9c22d4-d508-43c7-aa1b-2c85c85d8e91)) (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 142 "Net-(C140-Pad1)") (pintype "passive") (tstamp c87e1e19-9c97-46cc-bd70-71085ba7229c)) + (net 141 "Net-(C140-Pad1)") (pintype "passive") (tstamp c87e1e19-9c97-46cc-bd70-71085ba7229c)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 143 "Net-(C140-Pad2)") (pintype "passive") (tstamp 9af895b9-f261-4176-ad13-c71f990d9143)) + (net 142 "Net-(C140-Pad2)") (pintype "passive") (tstamp 9af895b9-f261-4176-ad13-c71f990d9143)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -1501,9 +1504,9 @@ (fp_line (start 1.4 -0.9) (end 1.4 0.9) (layer "F.Fab") (width 0.1) (tstamp cb04241a-824e-4fc3-af1d-ca16a4a47694)) (fp_line (start 0.25 0) (end 0.75 0) (layer "F.Fab") (width 0.1) (tstamp dc02565d-725b-4197-9c23-0c14d702227d)) (pad "1" smd rect (at -1.4 0 90) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") - (net 185 "Net-(D14-Pad2)") (pinfunction "K") (pintype "passive") (tstamp ea3201bf-f6ff-441b-8764-2c8ff7d85201)) + (net 184 "Net-(D14-Pad2)") (pinfunction "K") (pintype "passive") (tstamp ea3201bf-f6ff-441b-8764-2c8ff7d85201)) (pad "2" smd rect (at 1.4 0 90) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") - (net 186 "Net-(D15-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 432312bf-7333-43cf-bdb2-dfb387ac86ce)) + (net 185 "Net-(D15-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 432312bf-7333-43cf-bdb2-dfb387ac86ce)) (model "${KICAD6_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-123F.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -1546,7 +1549,7 @@ (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 61d87c1c-24a3-43f2-ad2e-7f1d76be350f)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 323 "Net-(R31-Pad1)") (pintype "passive") (tstamp 67225a8f-33b5-4e41-9991-2b9148e1a574)) + (net 322 "Net-(R31-Pad1)") (pintype "passive") (tstamp 67225a8f-33b5-4e41-9991-2b9148e1a574)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -1556,7 +1559,7 @@ (footprint "mpb:PLD-1.5W" (layer "F.Cu") (tedit 5FBA9FA6) (tstamp 09899c88-1cda-4bcb-afb3-a3c7c8016219) - (at 341.809 -55.199) + (at 136.45 200.706) (property "Need_order" "0") (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") @@ -1584,9 +1587,9 @@ (fp_line (start -3.75 -2.5) (end -2.75 -2.5) (layer "F.SilkS") (width 0.15) (tstamp eb6a8a9a-0f0a-4b8c-8b36-5625f51b113a)) (fp_line (start 3.75 -3) (end 2.75 -3) (layer "F.SilkS") (width 0.15) (tstamp f9b094dd-238b-4ef6-a6a5-5bc92889851c)) (pad "1" smd rect locked (at 0 -3.5) (size 5 3.16) (layers "F.Cu" "F.Paste" "F.Mask") - (net 295 "Net-(L40-Pad2)") (pinfunction "G") (pintype "input") (tstamp 6134ca1a-5bf5-4bb6-b7a6-6f50a0d0c241)) + (net 294 "Net-(L40-Pad2)") (pinfunction "G") (pintype "input") (tstamp 6134ca1a-5bf5-4bb6-b7a6-6f50a0d0c241)) (pad "2" smd rect locked (at 0 3.5) (size 5 3.16) (layers "F.Cu" "F.Paste" "F.Mask") - (net 152 "Net-(C148-Pad2)") (pinfunction "D") (pintype "passive") (tstamp a3db193d-7d39-46ee-a2d9-8eb51d556f0c)) + (net 151 "Net-(C148-Pad2)") (pinfunction "D") (pintype "passive") (tstamp a3db193d-7d39-46ee-a2d9-8eb51d556f0c)) (pad "3" thru_hole circle locked (at 0 -0.6) (size 0.6 0.6) (drill 0.5) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "S") (pintype "passive") (tstamp 0d6d4006-d288-47b6-8f58-6d799f0b688f)) (pad "3" thru_hole circle locked (at -3 -0.6) (size 0.6 0.6) (drill 0.5) (layers *.Cu *.Mask) @@ -1621,7 +1624,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 0a1593aa-fd33-4e31-82c3-cc9183ca5eb8) - (at 337.824 -24.914) + (at 132.465 230.991) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "885612007040/VJ0805A102GXXPW1BC") @@ -1653,9 +1656,9 @@ (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp a644dd98-5e9c-4854-b69e-e6eda7e7bac1)) (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp da8e1edb-0e5e-48d7-aab2-36a766f7108c)) (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 138 "Net-(C136-Pad1)") (pintype "passive") (tstamp ea399962-671d-4852-9bdb-6da750725300)) + (net 137 "Net-(C136-Pad1)") (pintype "passive") (tstamp ea399962-671d-4852-9bdb-6da750725300)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 139 "Net-(C136-Pad2)") (pintype "passive") (tstamp 67ff1c44-7613-4c5e-8650-a70f5d6a885f)) + (net 138 "Net-(C136-Pad2)") (pintype "passive") (tstamp 67ff1c44-7613-4c5e-8650-a70f5d6a885f)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -1665,7 +1668,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 0a68ae67-0cc4-4319-9901-c483da579f78) - (at 219.242 -47.852) + (at 274.701 -15.367 180) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "Need_order" "0") @@ -1695,9 +1698,9 @@ (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp 366eed3c-5cbe-403d-930e-5386cf756f92)) (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp f15a075f-7991-43e0-bb82-ec76ff1de50d)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp fa2f3282-82aa-4776-bc9b-cb762b0b9716)) - (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 137 "/70MHz VHF Frontend/VHF_TX") (pintype "passive") (tstamp bee96987-6565-4b57-8523-8b3438d2708a)) - (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (pad "1" smd roundrect (at -1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 136 "/70MHz VHF Frontend/VHF_TX") (pintype "passive") (tstamp bee96987-6565-4b57-8523-8b3438d2708a)) + (pad "2" smd roundrect (at 1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 4bb64c58-f997-4842-94d3-803f8724408f)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) @@ -1708,7 +1711,7 @@ (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 0b391c09-2d76-4b27-9a34-b08210ccf47e) - (at 361.574 -45.394) + (at 156.215 210.511) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor") (property "Need_order" "0") @@ -1739,9 +1742,9 @@ (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp 95aaa18b-6796-4376-9b01-2ed6f3de7229)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp f9bc191d-58f8-4468-a76d-5e5330906320)) (pad "1" smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902) - (net 151 "Net-(C148-Pad1)") (pintype "passive") (tstamp 56957936-e63f-4309-983a-19348d5a3223)) + (net 150 "Net-(C148-Pad1)") (pintype "passive") (tstamp 56957936-e63f-4309-983a-19348d5a3223)) (pad "2" smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902) - (net 295 "Net-(L40-Pad2)") (pintype "passive") (tstamp a37ab1a9-f969-48c2-83bf-e8bcaf2b4c26)) + (net 294 "Net-(L40-Pad2)") (pintype "passive") (tstamp a37ab1a9-f969-48c2-83bf-e8bcaf2b4c26)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -1812,7 +1815,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 0c1aa8d3-ebf7-47a3-a608-884732a0be62) - (at 371.134 -52.764) + (at 165.775 203.141) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -1845,7 +1848,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp cb592244-cd4b-484f-bb45-5e9b9aac2b8f)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 260 "/PA 70MHz/EN_PA") (pintype "passive") (tstamp 6ff4dd04-faff-407c-8122-7cfce48faae3)) + (net 259 "/PA 70MHz/EN_PA") (pintype "passive") (tstamp 6ff4dd04-faff-407c-8122-7cfce48faae3)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -1853,6 +1856,50 @@ ) ) + (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEF0) (tstamp 0cecbbb3-27a5-4bef-a1b4-ad20be161516) + (at 202.692 -2.794 180) + (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") + (tags "inductor handsolder") + (property "MPN" "LQW2UASR56") + (property "Need_order" "1") + (property "Sheetfile" "frontend_70.kicad_sch") + (property "Sheetname" "70MHz VHF Frontend") + (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/9cb308a9-f2c7-4447-a4d8-ab7836ee30bb") + (attr smd) + (fp_text reference "L44" (at 0 -2.05) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp f28d5062-8857-406d-8c90-03fe5facf225) + ) + (fp_text value "56nH" (at 0 2.05) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 22a4e87c-6f53-4fc5-a786-b6a32e1d50f3) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.62 0.62) (thickness 0.09))) + (tstamp 6d126385-ef89-4cc4-b012-2500fef484d5) + ) + (fp_line (start -0.261252 1.11) (end 0.261252 1.11) (layer "F.SilkS") (width 0.12) (tstamp 194ed75e-3b0d-476c-bfc8-8fd34daa06ee)) + (fp_line (start -0.261252 -1.11) (end 0.261252 -1.11) (layer "F.SilkS") (width 0.12) (tstamp 9080e3f4-3d82-447b-a3d9-a9a4150f03f4)) + (fp_line (start -2.12 1.35) (end -2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 14b65019-a25e-444a-b47b-99845aaa014a)) + (fp_line (start 2.12 1.35) (end -2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp 4c9fabc7-221f-495b-b083-1da79e4b5025)) + (fp_line (start -2.12 -1.35) (end 2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 7852d9ab-3524-465b-9c36-722206f54f2a)) + (fp_line (start 2.12 -1.35) (end 2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp ea7e4560-ba3d-421c-9b43-e5600b90cf6e)) + (fp_line (start 1.25 1) (end -1.25 1) (layer "F.Fab") (width 0.1) (tstamp 1b1257bb-a24f-4808-adeb-e687bba7c3e4)) + (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 6bbea7b4-74a3-4974-8fe3-fb5065c90bf8)) + (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 796c014c-7868-4757-9649-700362447949)) + (fp_line (start 1.25 -1) (end 1.25 1) (layer "F.Fab") (width 0.1) (tstamp cffbb729-9946-4d97-a2fe-733a08cefb25)) + (pad "1" smd roundrect (at -1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 371 "Net-(L22-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 9e73771e-2c0f-4273-916e-4a77f17add23)) + (pad "2" smd roundrect (at 1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 475986b3-3820-4d54-ae49-e195a674b419)) + (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Connector_Molex:Molex_PicoBlade_53261-0871_1x08-1MP_P1.25mm_Horizontal" (layer "F.Cu") (tedit 5B78AD89) (tstamp 0d029794-9a32-47a1-9307-50f7b3e24c33) (at 16.495 59.69 -90) @@ -1910,19 +1957,19 @@ (pad "1" smd roundrect (at -4.375 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "Pin_1") (pintype "passive") (tstamp 96f38750-cca2-4a1d-84a0-92b26c75d491)) (pad "2" smd roundrect (at -3.125 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 248 "/Baseband/CW_TONE") (pinfunction "Pin_2") (pintype "passive") (tstamp 084de9d4-7d90-4ccc-8dde-39872a0176cd)) + (net 247 "/Baseband/CW_TONE") (pinfunction "Pin_2") (pintype "passive") (tstamp 084de9d4-7d90-4ccc-8dde-39872a0176cd)) (pad "3" smd roundrect (at -1.875 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 249 "unconnected-(J12-Pad3)") (pinfunction "Pin_3") (pintype "passive") (tstamp d93c8282-49d5-4560-ac60-320868cf053a)) + (net 248 "unconnected-(J12-Pad3)") (pinfunction "Pin_3") (pintype "passive") (tstamp d93c8282-49d5-4560-ac60-320868cf053a)) (pad "4" smd roundrect (at -0.625 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 250 "/Baseband/SPKR_VOL") (pinfunction "Pin_4") (pintype "passive") (tstamp 7c53349f-b076-49d3-9946-cb16a3ba3ec9)) + (net 249 "/Baseband/SPKR_VOL") (pinfunction "Pin_4") (pintype "passive") (tstamp 7c53349f-b076-49d3-9946-cb16a3ba3ec9)) (pad "5" smd roundrect (at 0.625 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 251 "/MUTE_MICn") (pinfunction "Pin_5") (pintype "passive") (tstamp 945782fc-0656-41f8-b763-a83a74f225f9)) + (net 250 "/MUTE_MICn") (pinfunction "Pin_5") (pintype "passive") (tstamp 945782fc-0656-41f8-b763-a83a74f225f9)) (pad "6" smd roundrect (at 1.875 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 252 "/SDA") (pinfunction "Pin_6") (pintype "passive") (tstamp 96358376-ca1b-403b-b4e0-ac6b2f6f52a8)) + (net 251 "/SDA") (pinfunction "Pin_6") (pintype "passive") (tstamp 96358376-ca1b-403b-b4e0-ac6b2f6f52a8)) (pad "7" smd roundrect (at 3.125 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 253 "/SCL") (pinfunction "Pin_7") (pintype "passive") (tstamp 89a0e741-3c80-47a8-91be-040387185869)) + (net 252 "/SCL") (pinfunction "Pin_7") (pintype "passive") (tstamp 89a0e741-3c80-47a8-91be-040387185869)) (pad "8" smd roundrect (at 4.375 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 254 "/S_METER") (pinfunction "Pin_8") (pintype "passive") (tstamp f05f079d-9f9d-4f66-850f-b40811fb37a6)) + (net 253 "/S_METER") (pinfunction "Pin_8") (pintype "passive") (tstamp f05f079d-9f9d-4f66-850f-b40811fb37a6)) (pad "MP" smd roundrect (at -6.925 0.5 270) (size 2.1 3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.119048) (tstamp 58edf5bf-56df-4f88-aa96-cf1310ae9f05)) (pad "MP" smd roundrect (at 6.925 0.5 270) (size 2.1 3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.119048) (tstamp 6000d844-aaa7-4f17-9a16-0355e4ac21c7)) (model "${KICAD6_3DMODEL_DIR}/Connector_Molex.3dshapes/Molex_PicoBlade_53261-0871_1x08-1MP_P1.25mm_Horizontal.wrl" @@ -1969,7 +2016,7 @@ (fp_line (start -0.325 -1.45) (end 0.65 -1.45) (layer "F.Fab") (width 0.1) (tstamp a30e0fbb-dc81-43ad-8ade-bb3a6e7267c3)) (fp_line (start 0.65 1.45) (end -0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp b2fec40f-4461-40bc-915c-b609e0442d46)) (pad "1" smd roundrect (at -0.9375 -0.95 180) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 177 "Net-(D7-Pad2)") (pinfunction "B") (pintype "input") (tstamp afae5d78-510a-4e9e-bb26-a6215c7a0b4b)) + (net 176 "Net-(D7-Pad2)") (pinfunction "B") (pintype "input") (tstamp afae5d78-510a-4e9e-bb26-a6215c7a0b4b)) (pad "2" smd roundrect (at -0.9375 0.95 180) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "E") (pintype "passive") (tstamp b64ccb6a-dcf8-438d-a357-54d787ca3bb4)) (pad "3" smd roundrect (at 0.9375 0 180) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) @@ -2011,7 +2058,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 0d9241dd-423b-4e79-b006-6fca155256c7) - (at 98.72 -43.21) + (at -34.29 56.896) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -2044,7 +2091,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp e5a24dbb-bcb5-449b-adbb-cf8261c7cf88)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 245 "/EN_VTX") (pintype "passive") (tstamp 76f257a9-47fa-4365-a9b4-731bb3d2fa38)) + (net 244 "/EN_VTX") (pintype "passive") (tstamp 76f257a9-47fa-4365-a9b4-731bb3d2fa38)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2087,7 +2134,7 @@ (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 64 "Net-(C54-Pad2)") (pintype "passive") (tstamp cd1c5144-3d34-42a2-847d-e048477cbd6a)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 302 "Net-(Q10-Pad1)") (pintype "passive") (tstamp f7377436-390b-4bdf-90d0-1e49af4ac83e)) + (net 301 "Net-(Q10-Pad1)") (pintype "passive") (tstamp f7377436-390b-4bdf-90d0-1e49af4ac83e)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2095,6 +2142,49 @@ ) ) + (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEEF) (tstamp 0e1cb933-efa3-4441-8caf-8cd7a675a751) + (at 164.084 -26.162 -90) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor handsolder") + (property "Need_order" "0") + (property "Sheetfile" "frontend_70.kicad_sch") + (property "Sheetname" "70MHz VHF Frontend") + (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/8110febd-c708-4dc6-9493-d3a4e8ebebb0") + (attr smd) + (fp_text reference "C180" (at 0 -1.68 90) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp ed773b50-0103-4231-acb9-6fa5f62e3d84) + ) + (fp_text value "DNF" (at 0 1.68 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp e8def7b7-8dc0-473b-94b3-a7ec5a794350) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 3038668e-d7ce-4f1b-844e-b8ec23cecbc6) + ) + (fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer "F.SilkS") (width 0.12) (tstamp ba02c313-39c1-453c-bdc7-c82931e70f29)) + (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer "F.SilkS") (width 0.12) (tstamp fde449b2-bbc4-4a23-95b9-0beb33c407e3)) + (fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer "F.CrtYd") (width 0.05) (tstamp 05bd1c2b-a603-40ba-87f3-87e525ecb9c0)) + (fp_line (start 1.88 0.98) (end -1.88 0.98) (layer "F.CrtYd") (width 0.05) (tstamp 74274416-9568-4f67-86ce-336dbf5b6e61)) + (fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer "F.CrtYd") (width 0.05) (tstamp df8c8e02-25c3-4e74-9f91-ac68e0c293a2)) + (fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer "F.CrtYd") (width 0.05) (tstamp ef566876-f3d5-4bb5-947c-b2726cdb0fc7)) + (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 7e101572-460d-44ff-b84e-044984fb704b)) + (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp a6e05b51-0ca5-4316-80e8-1c1308f48321)) + (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp d0364d38-f68c-4c7b-8ecd-7fc8b99c0ac9)) + (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp f37b48fc-aba4-4bc7-ab64-6ce6a4bbd6f9)) + (pad "1" smd roundrect (at -1.0375 0 270) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 114 "Net-(C106-Pad1)") (pintype "passive") (tstamp 16c12034-9634-442f-bb68-4c482091f2c7)) + (pad "2" smd roundrect (at 1.0375 0 270) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 2 "GND") (pintype "passive") (tstamp a9c8394a-fe3a-446d-ac4e-0d5dcdeffbae)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 0e2e44c7-2a63-4e79-a059-80ccb095d5dd) (at 83.312 49.53 -90) @@ -2131,7 +2221,7 @@ (pad "1" smd roundrect (at -1.1625 0 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 97 "Net-(C82-Pad1)") (pinfunction "1") (pintype "passive") (tstamp a4f7e848-d978-484b-b502-24a75623a926)) (pad "2" smd roundrect (at 1.1625 0 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 289 "Net-(L15-Pad1)") (pinfunction "2") (pintype "passive") (tstamp f9cf66ea-8916-492e-a68f-ef2b2a72fcc3)) + (net 288 "Net-(L15-Pad1)") (pinfunction "2") (pintype "passive") (tstamp f9cf66ea-8916-492e-a68f-ef2b2a72fcc3)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2141,7 +2231,7 @@ (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 0e582e88-8ae7-4c0f-9b58-3c48bf4c34c8) - (at 105.13 -54.39) + (at -27.88 45.716) (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2UAS1R0x0CL") @@ -2224,21 +2314,21 @@ (fp_line (start -1.27 0) (end 0 -1.27) (layer "F.Fab") (width 0.1) (tstamp 71b355b7-fce4-49af-b309-7bc76d190e50)) (fp_line (start -1.27 8.89) (end -1.27 0) (layer "F.Fab") (width 0.1) (tstamp fccac26e-070a-43fb-b064-350050de9830)) (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 164 "/Control on separate board/3.3V_UI") (pinfunction "Pin_1") (pintype "passive") (tstamp 06bebb4b-72d2-4a6d-affd-235cecbb2114)) + (net 163 "/Control on separate board/3.3V_UI") (pinfunction "Pin_1") (pintype "passive") (tstamp 06bebb4b-72d2-4a6d-affd-235cecbb2114)) (pad "2" thru_hole oval (at 2.54 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 274 "/Control on separate board/PA0") (pinfunction "Pin_2") (pintype "passive") (tstamp ec1d640b-6ed7-49d1-a1da-1d757efa87a6)) + (net 273 "/Control on separate board/PA0") (pinfunction "Pin_2") (pintype "passive") (tstamp ec1d640b-6ed7-49d1-a1da-1d757efa87a6)) (pad "3" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 275 "/Control on separate board/USART1_TX") (pinfunction "Pin_3") (pintype "passive") (tstamp 591a72e4-8ec4-4634-8f0f-ac3a0d2029d5)) + (net 274 "/Control on separate board/USART1_TX") (pinfunction "Pin_3") (pintype "passive") (tstamp 591a72e4-8ec4-4634-8f0f-ac3a0d2029d5)) (pad "4" thru_hole oval (at 2.54 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 270 "/Control on separate board/I2C2_SCL") (pinfunction "Pin_4") (pintype "passive") (tstamp dfb62bba-8d00-42a9-9fa2-d671645d12d3)) + (net 269 "/Control on separate board/I2C2_SCL") (pinfunction "Pin_4") (pintype "passive") (tstamp dfb62bba-8d00-42a9-9fa2-d671645d12d3)) (pad "5" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 276 "/Control on separate board/USART1_RX") (pinfunction "Pin_5") (pintype "passive") (tstamp 67376028-5211-4ae5-a04e-d797d1a29f50)) + (net 275 "/Control on separate board/USART1_RX") (pinfunction "Pin_5") (pintype "passive") (tstamp 67376028-5211-4ae5-a04e-d797d1a29f50)) (pad "6" thru_hole oval (at 2.54 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 269 "/Control on separate board/I2C2_SDA") (pinfunction "Pin_6") (pintype "passive") (tstamp abcc9641-98a2-4f9f-a186-7026a9aab76e)) + (net 268 "/Control on separate board/I2C2_SDA") (pinfunction "Pin_6") (pintype "passive") (tstamp abcc9641-98a2-4f9f-a186-7026a9aab76e)) (pad "7" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_7") (pintype "passive") (tstamp b05170b8-efab-45d8-a85a-992ee4f85553)) (pad "8" thru_hole oval (at 2.54 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 277 "/Control on separate board/PB15") (pinfunction "Pin_8") (pintype "passive") (tstamp ffcfc4dd-734a-45ff-a052-bb635a6eed16)) + (net 276 "/Control on separate board/PB15") (pinfunction "Pin_8") (pintype "passive") (tstamp ffcfc4dd-734a-45ff-a052-bb635a6eed16)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_2x04_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2286,7 +2376,7 @@ (net 81 "Net-(C69-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 459d5b3b-3555-4bf6-b72d-60f002cd3f0d)) (pad "2" smd rect (at -1.5 0.95 180) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp eacddb67-f8cf-4b4b-be61-aa476d1c12e3)) (pad "3" smd rect (at 1.5 0 180) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 183 "Net-(D11-Pad3)") (pinfunction "K") (pintype "passive") (tstamp 29d6e036-02ea-444b-8c7e-4be89f02661f)) + (net 182 "Net-(D11-Pad3)") (pinfunction "K") (pintype "passive") (tstamp 29d6e036-02ea-444b-8c7e-4be89f02661f)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2296,7 +2386,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 0f50ba34-315b-4881-85a4-f88c84ff27c6) - (at 311.214 -18.274) + (at 105.855 237.631) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A560JXAMC") @@ -2330,7 +2420,7 @@ (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp d428d263-e2ac-413f-9816-a59828ed4c3d)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 156 "Net-(C155-Pad2)") (pintype "passive") (tstamp e49c742a-e568-4c7d-a7af-d06f2c20d345)) + (net 155 "Net-(C155-Pad2)") (pintype "passive") (tstamp e49c742a-e568-4c7d-a7af-d06f2c20d345)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2414,6 +2504,50 @@ (net 1 "+12V") (pinfunction "Pin_2") (pintype "passive") (tstamp 99cbf28f-a4bc-4f7d-b90d-0faf94b51c3a)) ) + (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEF0) (tstamp 10c89dc9-d928-4c0c-a257-4f8609064447) + (at 227.076 -2.794 180) + (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") + (tags "inductor handsolder") + (property "MPN" "LQW2UASR56") + (property "Need_order" "1") + (property "Sheetfile" "frontend_70.kicad_sch") + (property "Sheetname" "70MHz VHF Frontend") + (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/38f03d60-4b67-4370-9597-a2db20bcab31") + (attr smd) + (fp_text reference "L47" (at 0 -2.05) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 4aa2b2ce-880f-42fb-b3ef-b35bf0383537) + ) + (fp_text value "56nH" (at 0 2.05) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 633c75d6-c466-420e-ae96-5010dee91ea0) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.62 0.62) (thickness 0.09))) + (tstamp bef33de6-ff4a-4a20-aeaf-a8bc4f6d18b1) + ) + (fp_line (start -0.261252 1.11) (end 0.261252 1.11) (layer "F.SilkS") (width 0.12) (tstamp c536b003-7cf5-443e-8e70-31e8de5d5b13)) + (fp_line (start -0.261252 -1.11) (end 0.261252 -1.11) (layer "F.SilkS") (width 0.12) (tstamp d36b548e-9d65-456e-9011-33d3d314022c)) + (fp_line (start -2.12 1.35) (end -2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 10b2bda6-c8cd-428f-9cfe-e3de98d1c499)) + (fp_line (start 2.12 -1.35) (end 2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp 472c6b86-347a-4bd2-b37e-82a30365779f)) + (fp_line (start -2.12 -1.35) (end 2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 53421c4a-1636-41ad-a616-f96a28dee05f)) + (fp_line (start 2.12 1.35) (end -2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp 69da6fcc-be17-44e2-8786-45151ce50be5)) + (fp_line (start 1.25 -1) (end 1.25 1) (layer "F.Fab") (width 0.1) (tstamp 0d5000d5-cc39-4f27-9c17-81e08e69d5f8)) + (fp_line (start 1.25 1) (end -1.25 1) (layer "F.Fab") (width 0.1) (tstamp 2a81a3a5-4322-4895-a613-3df526a0553f)) + (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 832fa49f-9e7e-4f80-964a-3534ce933517)) + (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp c7a7b76d-bb88-4f8f-a7a4-f5b41fab898a)) + (pad "1" smd roundrect (at -1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 374 "Net-(L31-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 7a531db9-c52c-48d9-bb17-6bc0ce9bbc0a)) + (pad "2" smd roundrect (at 1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 326b4ba6-fba6-4a22-98cb-c7fe2413e3a7)) + (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 12782f16-2b62-4371-87da-f44d2222486d) (at 82.804 97.79 -90) @@ -2491,9 +2625,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 577f0844-5ee1-4e83-ab3a-0a03401a517c)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 5f752cc1-95e2-43a6-90de-5fe3534ac7de)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 341 "/Control on separate board/BTN1") (pintype "passive") (tstamp 9e3cbe8e-b3cb-4245-b40d-3f79713044a1)) + (net 340 "/Control on separate board/BTN1") (pintype "passive") (tstamp 9e3cbe8e-b3cb-4245-b40d-3f79713044a1)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp b88b5d67-f731-4287-a488-1296a850316b)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp b88b5d67-f731-4287-a488-1296a850316b)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2621,9 +2755,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c9e61f4f-b691-49f2-bc9b-527fb319df84)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp fe74b5e8-73c3-4c19-b700-497b4e015512)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 346 "/Control on separate board/XTAL1") (pintype "passive") (tstamp 1807376d-dfd5-45a4-ab3b-a5c045eb4ddf)) + (net 345 "/Control on separate board/XTAL1") (pintype "passive") (tstamp 1807376d-dfd5-45a4-ab3b-a5c045eb4ddf)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 347 "/Control on separate board/XTAL2") (pintype "passive") (tstamp 5ae20f5f-fe47-411d-9434-34054f777f47)) + (net 346 "/Control on separate board/XTAL2") (pintype "passive") (tstamp 5ae20f5f-fe47-411d-9434-34054f777f47)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2633,7 +2767,7 @@ (footprint "Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 14dc32f6-e5b6-490f-a931-3b95f5aa1b33) - (at 224.022 -47.882) + (at 139.7 -26.416 -90) (descr "Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2BASR33G00L") @@ -2642,15 +2776,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/df91f107-ce19-4305-99b6-a011009326de") (attr smd) - (fp_text reference "L23" (at 0 -1.65) (layer "F.SilkS") + (fp_text reference "L23" (at 0 -1.65 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 76a92c8e-008b-4447-8149-e97e7cd593db) ) - (fp_text value "330nH" (at 0 1.65) (layer "F.Fab") + (fp_text value "330nH" (at 0 1.65 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 4e8e281e-4bf2-49e1-9109-fc8e6039287d) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.08))) (tstamp 22fa4277-7270-46fa-8b1d-132e6e5077df) ) @@ -2664,10 +2798,10 @@ (fp_line (start 1 -0.6) (end 1 0.6) (layer "F.Fab") (width 0.1) (tstamp b03da405-3975-4f0b-998e-baacffde0a3f)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer "F.Fab") (width 0.1) (tstamp bbc420ca-18e8-43e0-a73a-abee28e20d47)) (fp_line (start -1 0.6) (end -1 -0.6) (layer "F.Fab") (width 0.1) (tstamp eb12e364-66c6-4c46-b2d5-5cf9f5b1e3a9)) - (pad "1" smd roundrect (at -1.025 0) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 291 "Net-(L21-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 2b4b3632-073c-4b99-899b-21ae2c2f8b72)) - (pad "2" smd roundrect (at 1.025 0) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 292 "Net-(L23-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 9bb2e518-de3e-440c-8af1-cb994a1fa79f)) + (pad "1" smd roundrect (at -1.025 0 270) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) + (net 290 "Net-(L21-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 2b4b3632-073c-4b99-899b-21ae2c2f8b72)) + (pad "2" smd roundrect (at 1.025 0 270) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) + (net 291 "Net-(L23-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 9bb2e518-de3e-440c-8af1-cb994a1fa79f)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2677,7 +2811,7 @@ (footprint "TestPoint:TestPoint_Pad_D2.0mm" (layer "F.Cu") (tedit 5A0F774F) (tstamp 14e7a0cd-b6a4-4afc-b045-61fe2422aed5) - (at 227.502 -39.362) + (at 253.492 -17.526) (descr "SMD pad as test Point, diameter 2.0mm") (tags "test point SMD pad") (property "Sheetfile" "frontend_70.kicad_sch") @@ -2699,12 +2833,12 @@ (fp_circle (center 0 0) (end 0 1.2) (layer "F.SilkS") (width 0.12) (fill none) (tstamp b80f381e-b3da-4200-9ccb-5a4a29253e22)) (fp_circle (center 0 0) (end 1.5 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp d3dcb363-9f88-480c-a69f-7f48f96750f3)) (pad "1" smd circle (at 0 0) (size 2 2) (layers "F.Cu" "F.Mask") - (net 135 "Net-(C129-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 6d7cabc1-559b-45c5-a653-cbb7138fe951)) + (net 134 "Net-(C129-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 6d7cabc1-559b-45c5-a653-cbb7138fe951)) ) (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 15264f9d-9466-4ca0-a33a-6110af6eb9bc) - (at 371.094 -49.754) + (at 165.735 206.151) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -2735,9 +2869,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c06976a6-84b7-42a4-911b-b45ea9880c26)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp ce611fd3-f04b-4b6d-ae1b-a2c5f68461d2)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 147 "Net-(C144-Pad2)") (pintype "passive") (tstamp 898c6465-88d8-484d-8e69-2a39beee1c17)) + (net 146 "Net-(C144-Pad2)") (pintype "passive") (tstamp 898c6465-88d8-484d-8e69-2a39beee1c17)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 148 "VGG2") (pintype "passive") (tstamp 29731d50-e348-45d0-a7b7-cf23858ca817)) + (net 147 "VGG2") (pintype "passive") (tstamp 29731d50-e348-45d0-a7b7-cf23858ca817)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2782,11 +2916,11 @@ (fp_line (start -0.175 -1.1) (end -0.675 -0.6) (layer "F.Fab") (width 0.1) (tstamp dc9ad4df-ee50-4c8b-be06-c06869b358c7)) (fp_line (start 0.675 -1.1) (end 0.675 1.1) (layer "F.Fab") (width 0.1) (tstamp dca6129f-ce1a-448e-8873-4cc4b9f5d2f5)) (pad "1" smd rect (at -1.33 -0.65) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 188 "Net-(D16-Pad2)") (pintype "passive") (tstamp dc3bd94c-ec04-432b-ab4c-b38072bb337e)) + (net 187 "Net-(D16-Pad2)") (pintype "passive") (tstamp dc3bd94c-ec04-432b-ab4c-b38072bb337e)) (pad "2" smd rect (at -1.33 0.65) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 187 "Net-(D16-Pad1)") (pintype "passive") (tstamp 3469e1a5-d3f2-4418-b8ec-177528f5de18)) + (net 186 "Net-(D16-Pad1)") (pintype "passive") (tstamp 3469e1a5-d3f2-4418-b8ec-177528f5de18)) (pad "3" smd rect (at 1.33 0) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 190 "Net-(D17-Pad3)") (pintype "passive") (tstamp 90d0d9a5-fde7-4682-a128-5075b9f1a41e)) + (net 189 "Net-(D17-Pad3)") (pintype "passive") (tstamp 90d0d9a5-fde7-4682-a128-5075b9f1a41e)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-323_SC-70.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2796,7 +2930,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 15fc0413-5781-4122-8158-a89ef1c48e4f) - (at 346.854 -24.324) + (at 141.495 231.581) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -2827,9 +2961,9 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 8e4cc710-2d29-4729-94ea-42b1303c5bc5)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp a65a9859-c612-42b6-985a-3a5e99e0f7de)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 334 "Net-(R140-Pad1)") (pintype "passive") (tstamp 5e9c2452-1f68-42cb-8bab-a800fc70aab1)) + (net 333 "Net-(R140-Pad1)") (pintype "passive") (tstamp 5e9c2452-1f68-42cb-8bab-a800fc70aab1)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 335 "Net-(J27-Pad1)") (pintype "passive") (tstamp 89a4784e-82c9-4b6f-8b6c-8712aab6eafc)) + (net 334 "Net-(J27-Pad1)") (pintype "passive") (tstamp 89a4784e-82c9-4b6f-8b6c-8712aab6eafc)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2926,7 +3060,7 @@ (footprint "Potentiometer_SMD:Potentiometer_Bourns_3214W_Vertical" (layer "F.Cu") (tedit 5A3D7171) (tstamp 16ca3596-7e3f-4ba5-bc08-3da5a247f38e) - (at 324.584 -20.604) + (at 119.225 235.301) (descr "Potentiometer, vertical, Bourns 3214W, https://www.bourns.com/docs/Product-Datasheets/3214.pdf") (tags "Potentiometer vertical Bourns 3214W") (property "MPN" "Bourns 3214W-1-102E") @@ -2966,9 +3100,9 @@ (fp_line (start -1.2 1.393) (end -1.199 -0.092) (layer "F.Fab") (width 0.1) (tstamp d567c36d-9500-49d4-b4c0-3c170dcbd2fe)) (fp_circle (center -1.2 0.65) (end -0.45 0.65) (layer "F.Fab") (width 0.1) (fill none) (tstamp 051212a4-466e-4b65-b784-d10ea57f5d49)) (pad "1" smd rect (at 1.25 -1.45) (size 1.3 1.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 159 "Net-(C161-Pad2)") (pinfunction "1") (pintype "passive") (tstamp b63607b9-85c2-4a94-8316-536d9dd7bd9a)) + (net 158 "Net-(C161-Pad2)") (pinfunction "1") (pintype "passive") (tstamp b63607b9-85c2-4a94-8316-536d9dd7bd9a)) (pad "2" smd rect (at 0 1.45) (size 2 1.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 337 "Net-(R159-Pad1)") (pinfunction "2") (pintype "passive") (tstamp c738cb87-9d3d-478e-93ef-dd5e83c59202)) + (net 336 "Net-(R159-Pad1)") (pinfunction "2") (pintype "passive") (tstamp c738cb87-9d3d-478e-93ef-dd5e83c59202)) (pad "3" smd rect (at -1.25 -1.45) (size 1.3 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "3") (pintype "passive") (tstamp 6f6ede3d-256e-4586-9064-5a301455fb2e)) (model "${KICAD6_3DMODEL_DIR}/Potentiometer_SMD.3dshapes/Potentiometer_Bourns_3214W_Vertical.wrl" @@ -2980,7 +3114,7 @@ (footprint "Package_TO_SOT_SMD:SOT-223-3_TabPin2" (layer "F.Cu") (tedit 5A02FF57) (tstamp 16cd5eb4-f5d8-4bd2-b7ca-e012e0833188) - (at 330.144 -37.694) + (at 124.785 218.211) (descr "module CMS SOT223 4 pins") (tags "CMS SOT") (property "Need_order" "0") @@ -3016,11 +3150,11 @@ (pad "1" smd rect (at -3.15 -2.3) (size 2 1.5) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "GND") (pintype "power_in") (tstamp 354aaf3d-bf64-48a0-83b6-234695e7076d)) (pad "2" smd rect (at -3.15 0) (size 2 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 155 "/PA 70MHz/VG_5V") (pinfunction "VO") (pintype "power_out") (tstamp 2e00c070-fffc-4142-b4d8-c03e6f45a1b5)) + (net 154 "/PA 70MHz/VG_5V") (pinfunction "VO") (pintype "power_out") (tstamp 2e00c070-fffc-4142-b4d8-c03e6f45a1b5)) (pad "2" smd rect (at 3.15 0) (size 2 3.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 155 "/PA 70MHz/VG_5V") (pinfunction "VO") (pintype "power_out") (tstamp d6d4cb1e-4994-4e3d-b205-80f61b27c964)) + (net 154 "/PA 70MHz/VG_5V") (pinfunction "VO") (pintype "power_out") (tstamp d6d4cb1e-4994-4e3d-b205-80f61b27c964)) (pad "3" smd rect (at -3.15 2.3) (size 2 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 154 "Net-(C152-Pad1)") (pinfunction "VI") (pintype "power_in") (tstamp 6b468b49-8494-420a-b118-ee70fc92e48d)) + (net 153 "Net-(C152-Pad1)") (pinfunction "VI") (pintype "power_in") (tstamp 6b468b49-8494-420a-b118-ee70fc92e48d)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-223.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -3030,7 +3164,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 1714f711-342a-41ba-94a6-301d6d679207) - (at 200.782 -30.252) + (at 240.665 -22.352 180) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A103KXJTBC") @@ -3061,10 +3195,10 @@ (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 3c40de09-772a-486b-9616-318f81513afc)) (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp b6192115-7a3d-45ff-9497-c0b6d8c38198)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp e3bdf0f0-b500-482d-8d91-78f91b73a512)) - (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (pad "1" smd roundrect (at -1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 4fe5a45b-c49e-4645-be61-73987fb241e9)) - (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 119 "/70MHz VHF Frontend/+VTX_FE") (pintype "passive") (tstamp 4ab71cd8-4f77-4ebf-9644-09ada0144140)) + (pad "2" smd roundrect (at 1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 118 "/70MHz VHF Frontend/+VTX_FE") (pintype "passive") (tstamp 4ab71cd8-4f77-4ebf-9644-09ada0144140)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -3102,7 +3236,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp 17298f0c-c69d-4152-9210-91213d0c4c09) - (at 108.76 -64.09) + (at 137.414 49.53) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -3130,7 +3264,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 174737b3-41ef-47be-8a8a-917825ca1e7f) - (at 224.405 47.935 180) + (at 63.003 139.375 180) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A680GXAPW1BC") @@ -3218,7 +3352,7 @@ (footprint "Crystal:Crystal_HC49-U_Vertical" (layer "F.Cu") (tedit 5A1AD3B8) (tstamp 17ec6527-6037-46b6-b36f-4fc7b5683907) - (at 217.965 38.41 180) + (at 56.563 129.85 180) (descr "Crystal THT HC-49/U http://5hertz.com/pdfs/04404_D.pdf") (tags "THT crystalHC-49/U") (property "MPN" "ECS-110.5-32-1X") @@ -3268,7 +3402,7 @@ (footprint "Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm" (layer "F.Cu") (tedit 5A64794F) (tstamp 18a0735d-a066-4715-a011-81a3a0851676) - (at 73 -18.06) + (at -60.01 82.046) (descr "SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open") (tags "solder jumper open") (property "Need_order" "0") @@ -3305,7 +3439,7 @@ ) (width 0) (fill yes)) ) (tstamp 19e470fc-485e-4893-af82-641797ce70a0)) (pad "2" smd custom (at 0.725 0) (size 0.3 0.3) (layers "F.Cu" "F.Mask") - (net 287 "/LO1") (pinfunction "B") (pintype "passive") (zone_connect 2) + (net 286 "/LO1") (pinfunction "B") (pintype "passive") (zone_connect 2) (options (clearance outline) (anchor rect)) (primitives (gr_poly (pts @@ -3320,7 +3454,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 194497e7-e800-471d-9b3e-274872014cb8) - (at 190.982 -24.502) + (at 80.746 -14.088) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A103KXJTBC") @@ -3354,7 +3488,7 @@ (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 477856d4-4ee0-4c6d-bf95-96f53350c05e)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 126 "Net-(C118-Pad2)") (pintype "passive") (tstamp 6f878359-879e-4830-83b0-7851e4ee80d2)) + (net 125 "Net-(C118-Pad2)") (pintype "passive") (tstamp 6f878359-879e-4830-83b0-7851e4ee80d2)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -3407,7 +3541,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp 19d95e12-0637-425d-8aa2-d9a0843bd5c2) - (at 103 113) + (at 255.177 112.987) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -3435,7 +3569,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 1a8f5544-c818-4c78-9127-146fbc176806) - (at 162.352 -11.002) + (at 259.08 -9.779 -90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -3443,15 +3577,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/c82d2d64-f2e3-40e0-9435-b36a59b11335") (attr smd) - (fp_text reference "R131" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R131" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp a503c9bf-f5ba-421f-93c6-3d8ce4834244) ) - (fp_text value "12" (at 0 1.43) (layer "F.Fab") + (fp_text value "12" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp f7535f13-75af-44cc-8633-1bd6ee2db110) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 8c82f01e-8fe9-4ed8-b8ef-b065c451746a) ) @@ -3465,9 +3599,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 74d53473-f05d-496d-bbe6-ab0990573788)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp e19e17de-8492-40c7-9f82-761294733f72)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp fb0552ac-c002-4efe-b787-c29629658d1e)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 135 "Net-(C129-Pad1)") (pintype "passive") (tstamp b60a8509-7590-4c33-acb4-fc7f71b4f0e2)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 134 "Net-(C129-Pad1)") (pintype "passive") (tstamp b60a8509-7590-4c33-acb4-fc7f71b4f0e2)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 36a75a0c-f61d-4489-8add-4f37927f3d61)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) @@ -3478,7 +3612,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 1b11724c-e795-46be-8f08-84285fbaeeae) - (at 241.682 -58.742) + (at 186.9 -61.924) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -3509,7 +3643,7 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 92a4169f-3460-414c-8f72-7127daf34136)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp c1b427de-7e20-47bc-ad61-81959d9ab9b2)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 126 "Net-(C118-Pad2)") (pintype "passive") (tstamp ab4711be-46c0-48e1-b1c9-7a1722b52a56)) + (net 125 "Net-(C118-Pad2)") (pintype "passive") (tstamp ab4711be-46c0-48e1-b1c9-7a1722b52a56)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp ebc07f3a-8e01-4ef5-843c-443b9fefbe61)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -3521,7 +3655,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 1bafce3e-a05c-40ee-9ab1-dbf1bce75a0d) - (at 214.432 -47.852) + (at 244.602 -22.352) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A103KXJTBC") @@ -3555,7 +3689,7 @@ (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp cb466079-43ed-4f9e-a2b1-aae442f32213)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 119 "/70MHz VHF Frontend/+VTX_FE") (pintype "passive") (tstamp 55e63d5b-aeec-497f-a7e0-41b6127976a2)) + (net 118 "/70MHz VHF Frontend/+VTX_FE") (pintype "passive") (tstamp 55e63d5b-aeec-497f-a7e0-41b6127976a2)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -3565,7 +3699,7 @@ (footprint "mpb:TO-220-3_Vertical_SMD" (layer "F.Cu") (tedit 605B297E) (tstamp 1c1eebce-3ee0-4d91-b1d4-9bfd3669f304) - (at 328.934 -54.754) + (at 123.575 201.151) (descr "TO-220-3, Horizontal, RM 2.54mm, see https://www.vishay.com/docs/66542/to-220-1.pdf") (tags "TO-220-3 Horizontal RM 2.54mm") (property "Need_order" "0") @@ -3606,11 +3740,11 @@ (fp_line (start 7.54 -3.81) (end -2.46 -3.81) (layer "F.Fab") (width 0.1) (tstamp f635e859-a717-4ddc-a33d-bc8fc44abf86)) (fp_line (start 2.54 -3.81) (end 2.54 0) (layer "F.Fab") (width 0.1) (tstamp ff76681f-bc7e-4585-896f-fb7d1da0def7)) (pad "1" smd rect locked (at 0 -0.85) (size 2 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 334 "Net-(R140-Pad1)") (pinfunction "ADJ") (pintype "input") (tstamp 323fb558-e7ca-4134-801c-eaee28b751ed)) + (net 333 "Net-(R140-Pad1)") (pinfunction "ADJ") (pintype "input") (tstamp 323fb558-e7ca-4134-801c-eaee28b751ed)) (pad "2" smd rect locked (at 2.54 -0.85) (size 2 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 335 "Net-(J27-Pad1)") (pinfunction "VO") (pintype "power_out") (tstamp e19f51b7-884e-4be7-8671-1076c7743b29)) + (net 334 "Net-(J27-Pad1)") (pinfunction "VO") (pintype "power_out") (tstamp e19f51b7-884e-4be7-8671-1076c7743b29)) (pad "3" smd rect locked (at 5.08 -0.85) (size 2 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 140 "/PA 70MHz/12V") (pinfunction "VI") (pintype "power_in") (tstamp 3fc4578d-9915-4004-8df0-7e8164fd6d1e)) + (net 139 "/PA 70MHz/12V") (pinfunction "VI") (pintype "power_in") (tstamp 3fc4578d-9915-4004-8df0-7e8164fd6d1e)) (model "${KISYS3DMOD}/Package_TO_SOT_THT.3dshapes/TO-220-3_Horizontal_TabDown.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -3620,7 +3754,7 @@ (footprint "Package_TO_SOT_SMD:SOT-143" (layer "F.Cu") (tedit 61E30312) (tstamp 1c337858-4043-4c00-896c-ac5b41d4a80f) - (at 237.342 -60.282) + (at 171.704 -28.956 90) (descr "SOT-143 https://www.nxp.com/docs/en/package-information/SOT143B.pdf") (tags "SOT-143") (property "MPN" "BF998E6327HTSA1") @@ -3629,15 +3763,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/d819e135-c612-4142-a4c6-01ebb6330caf") (attr smd) - (fp_text reference "Q23" (at 0.02 -2.38) (layer "F.SilkS") + (fp_text reference "Q23" (at 0.02 -2.38 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 447a8351-603f-4139-8db4-35e57d60bc3e) ) - (fp_text value "BF998" (at -0.28 2.48) (layer "F.Fab") + (fp_text value "BF998" (at -0.28 2.48 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp bb0c9ba7-ca53-447e-8274-79e10d8209f5) ) - (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.075))) (tstamp 6d69f994-f2b2-4201-b390-fdedc6b26d04) ) @@ -3652,14 +3786,14 @@ (fp_line (start -0.15 -1.45) (end 0.65 -1.45) (layer "F.Fab") (width 0.1) (tstamp 80a21a91-c9ae-42e1-8474-6f3a06b6441c)) (fp_line (start 0.65 -1.45) (end 0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp c1b47e1a-de4d-4c9a-95df-07b0f6ae12b5)) (fp_line (start 0.65 1.45) (end -0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp d92cb9e3-3ea7-4579-bbf3-168649b7fa20)) - (pad "1" smd rect (at -1 -0.75) (size 0.7 1) (layers "F.Cu" "F.Paste" "F.Mask") - (net 313 "Net-(Q23-Pad1)") (pinfunction "D") (pintype "passive") (tstamp c79a00a2-0781-4648-8bb7-839ae32b3be0)) - (pad "2" smd rect (at -1 0.95) (size 0.7 0.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 117 "Net-(C108-Pad1)") (pinfunction "S") (pintype "passive") (tstamp a714484a-a9d6-49b7-b416-7baab6468f4f)) - (pad "3" smd rect (at 1 0.95) (size 0.7 0.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 114 "Net-(C104-Pad2)") (pinfunction "G1") (pintype "passive") (tstamp 80181232-22fd-4c6d-b63d-0be064bc27d0)) - (pad "4" smd rect (at 1 -0.95) (size 0.7 0.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 115 "Net-(C106-Pad1)") (pinfunction "G2") (pintype "passive") (tstamp 7c9ac6d6-5fd0-4dfc-9506-3873094a7092)) + (pad "1" smd rect (at -1 -0.75 90) (size 0.7 1) (layers "F.Cu" "F.Paste" "F.Mask") + (net 312 "Net-(Q23-Pad1)") (pinfunction "D") (pintype "passive") (tstamp c79a00a2-0781-4648-8bb7-839ae32b3be0)) + (pad "2" smd rect (at -1 0.95 90) (size 0.7 0.6) (layers "F.Cu" "F.Paste" "F.Mask") + (net 116 "Net-(C108-Pad1)") (pinfunction "S") (pintype "passive") (tstamp a714484a-a9d6-49b7-b416-7baab6468f4f)) + (pad "3" smd rect (at 1 0.95 90) (size 0.7 0.6) (layers "F.Cu" "F.Paste" "F.Mask") + (net 113 "Net-(C104-Pad2)") (pinfunction "G1") (pintype "passive") (tstamp 80181232-22fd-4c6d-b63d-0be064bc27d0)) + (pad "4" smd rect (at 1 -0.95 90) (size 0.7 0.6) (layers "F.Cu" "F.Paste" "F.Mask") + (net 114 "Net-(C106-Pad1)") (pinfunction "G2") (pintype "passive") (tstamp 7c9ac6d6-5fd0-4dfc-9506-3873094a7092)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-143.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -3704,7 +3838,7 @@ (fp_line (start 0.65 1.45) (end -0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp 70203a34-1f3f-4c9b-a108-852ba7c4a57f)) (fp_line (start -0.65 -1.125) (end -0.325 -1.45) (layer "F.Fab") (width 0.1) (tstamp 9bfac9c3-8392-4f21-9ce4-5733ebcc9e55)) (pad "1" smd roundrect (at -0.9375 -0.95 270) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 311 "Net-(Q20-Pad1)") (pinfunction "B") (pintype "input") (tstamp bacb6af0-595b-4bd8-b746-4a8c2ef5f159)) + (net 310 "Net-(Q20-Pad1)") (pinfunction "B") (pintype "input") (tstamp bacb6af0-595b-4bd8-b746-4a8c2ef5f159)) (pad "2" smd roundrect (at -0.9375 0.95 270) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 82 "Net-(C69-Pad2)") (pinfunction "E") (pintype "passive") (tstamp ffaad932-3fe0-4f5e-aaf3-72071dee7f25)) (pad "3" smd roundrect (at 0.9375 0 270) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) @@ -3750,7 +3884,7 @@ (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 719f031a-6b57-4cdc-ad86-236ec9e32f29)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 828c4d84-3a40-43ba-b1fa-4cd0d24e8937)) (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 166 "Net-(C171-Pad1)") (pintype "passive") (tstamp c126935b-5d7b-475c-8280-40403137fd95)) + (net 165 "Net-(C171-Pad1)") (pintype "passive") (tstamp c126935b-5d7b-475c-8280-40403137fd95)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp d967f412-7372-4751-a884-72c3264c9a6b)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" @@ -3762,7 +3896,7 @@ (footprint "Crystal:Crystal_HC49-U_Vertical" (layer "F.Cu") (tedit 5A1AD3B8) (tstamp 1cbe07f4-caa4-48e4-8212-c4b82069218e) - (at 217.965 70.16 180) + (at 56.563 161.6 180) (descr "Crystal THT HC-49/U http://5hertz.com/pdfs/04404_D.pdf") (tags "THT crystalHC-49/U") (property "MPN" "ECS-110.5-32-1X") @@ -3812,7 +3946,7 @@ (footprint "mpb:four_4mm_pads_narrow" (layer "F.Cu") (tedit 60603814) (tstamp 1dba06d5-42fc-43d3-8791-f3ab4331d8dc) - (at 194.277 -55.907) + (at 185.42 -29.464) (property "Need_order" "0") (property "Sheetfile" "frontend_70.kicad_sch") (property "Sheetname" "70MHz VHF Frontend") @@ -3833,13 +3967,13 @@ (fp_line (start 6.3 -1.85) (end 6.3 1.65) (layer "F.SilkS") (width 0.15) (tstamp bac393e5-681c-45d6-8247-b96a50bcd196)) (fp_line (start -1.95 5.65) (end 2.1 5.65) (layer "F.SilkS") (width 0.15) (tstamp fd8b4cdb-333f-496a-bfdc-36750ce41538)) (pad "1" smd rect locked (at -4.2 -4.1) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 118 "Net-(C109-Pad2)") (pinfunction "AA") (pintype "passive") (tstamp a6dce2d1-bb0c-49f6-b8d8-6aa61c912c06)) + (net 117 "Net-(C109-Pad2)") (pinfunction "AA") (pintype "passive") (tstamp a6dce2d1-bb0c-49f6-b8d8-6aa61c912c06)) (pad "2" smd rect locked (at -4.2 3.9) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 313 "Net-(Q23-Pad1)") (pinfunction "AB") (pintype "passive") (tstamp 90f7d5ca-acc4-4e6f-9343-debfb787e2a1)) + (net 312 "Net-(Q23-Pad1)") (pinfunction "AB") (pintype "passive") (tstamp 90f7d5ca-acc4-4e6f-9343-debfb787e2a1)) (pad "3" smd rect locked (at 4.2 -4.1) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "SA") (pintype "passive") (tstamp 4068b5ba-1509-4860-a3cc-d1483c2a956e)) (pad "4" smd rect locked (at 4.2 3.9) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 121 "Net-(C112-Pad1)") (pinfunction "SB") (pintype "passive") (tstamp 1bd22dca-e6e0-4bf0-9ecd-8c598fcd28cd)) + (net 120 "Net-(C112-Pad1)") (pinfunction "SB") (pintype "passive") (tstamp 1bd22dca-e6e0-4bf0-9ecd-8c598fcd28cd)) ) (footprint "Package_TO_SOT_SMD:SOT-23" (layer "F.Cu") @@ -3879,11 +4013,11 @@ (fp_line (start -0.65 -1.125) (end -0.325 -1.45) (layer "F.Fab") (width 0.1) (tstamp d615dd8b-cd20-4447-8a83-838ea0e839ca)) (fp_line (start -0.65 1.45) (end -0.65 -1.125) (layer "F.Fab") (width 0.1) (tstamp eb203eda-6e7c-42c8-a0ab-2e698a88f787)) (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 304 "Net-(Q11-Pad1)") (pinfunction "B") (pintype "input") (tstamp 701f64e8-d679-4a03-a93f-c479cbade1fe)) + (net 303 "Net-(Q11-Pad1)") (pinfunction "B") (pintype "input") (tstamp 701f64e8-d679-4a03-a93f-c479cbade1fe)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 62 "Net-(C53-Pad1)") (pinfunction "E") (pintype "passive") (tstamp deb374d4-f74e-4cca-8c8d-428e986866af)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 305 "Net-(Q11-Pad3)") (pinfunction "C") (pintype "passive") (tstamp baa35e80-0b3e-40f5-afc8-6a9213bbcbe2)) + (net 304 "Net-(Q11-Pad3)") (pinfunction "C") (pintype "passive") (tstamp baa35e80-0b3e-40f5-afc8-6a9213bbcbe2)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -3921,7 +4055,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 1e8927eb-a42c-4837-86dc-d424c693e151) - (at 232.582 -55.292) + (at 190.754 -29.591 -90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -3929,15 +4063,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/adfaa774-db5e-422d-9336-f5bf2f9e7ca0") (attr smd) - (fp_text reference "R119" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R119" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp b1cc9a92-baaa-48cd-845b-fb799f843e28) ) - (fp_text value "DNF" (at 0 1.43) (layer "F.Fab") + (fp_text value "DNF" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp aa4b8c61-27fd-48db-ac1c-70a1b3d1ab54) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 964c4ca2-c58f-4051-aa42-9082667be682) ) @@ -3951,10 +4085,10 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 8f9797a6-a6aa-42df-b9cc-e1669ed5ce5b)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp a050bbb7-053f-4a8e-9b97-79f2f538a27b)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp da6ba917-9d8f-4992-8b59-777b9ed9d11c)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp ce6e9899-79af-4216-8a4a-276a83fb26ce)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 121 "Net-(C112-Pad1)") (pintype "passive") (tstamp e36a0ff9-40b2-48e6-b6c3-df933d512af4)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 120 "Net-(C112-Pad1)") (pintype "passive") (tstamp e36a0ff9-40b2-48e6-b6c3-df933d512af4)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -3998,7 +4132,7 @@ (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 03d58b1e-e057-4f2e-8094-e6160d50f6c4)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 168 "Net-(C173-Pad2)") (pintype "passive") (tstamp 552a3d21-c4db-440a-890d-2d4a8e255324)) + (net 167 "Net-(C173-Pad2)") (pintype "passive") (tstamp 552a3d21-c4db-440a-890d-2d4a8e255324)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -4008,7 +4142,7 @@ (footprint "Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 1ff43759-f459-437b-9a80-f34e3d36a58f) - (at 183.132 -39.532) + (at 72.896 -29.118) (descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "TAJA106K016RNJ") @@ -4041,7 +4175,7 @@ (fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer "F.Fab") (width 0.1) (tstamp ad4620a9-e2da-4cd8-b20b-02359ccd7162)) (fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer "F.Fab") (width 0.1) (tstamp ff29fd12-abe6-4694-98c9-2916bd5101d5)) (pad "1" smd roundrect (at -1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) - (net 125 "/70MHz VHF Frontend/12V") (pintype "passive") (tstamp f2dc67e9-6586-4f9a-b80c-f2f50abf006d)) + (net 124 "/70MHz VHF Frontend/12V") (pintype "passive") (tstamp f2dc67e9-6586-4f9a-b80c-f2f50abf006d)) (pad "2" smd roundrect (at 1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) (net 2 "GND") (pintype "passive") (tstamp 86f09199-f5a5-4eb3-9590-aa85f682d40d)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" @@ -4084,7 +4218,7 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 46bdaed7-b1a6-418c-ae6c-25b11e0edb98)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp b2519a44-3bf2-466f-aa15-faa59f3b73bd)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 311 "Net-(Q20-Pad1)") (pintype "passive") (tstamp ac80163e-910b-4626-89c0-984bed500b71)) + (net 310 "Net-(Q20-Pad1)") (pintype "passive") (tstamp ac80163e-910b-4626-89c0-984bed500b71)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 4db90c3e-3c23-4d35-9a20-5f241ba2170d)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -4185,7 +4319,7 @@ (footprint "mpb:four_4mm_pads_narrow" (layer "F.Cu") (tedit 60603814) (tstamp 219bb6a6-60be-4313-9481-eeba8a33686b) - (at 301.939 -24.179) + (at 96.58 231.726) (property "Need_order" "0") (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") @@ -4206,13 +4340,13 @@ (fp_line (start -5.95 -1.85) (end -1.95 -1.85) (layer "F.SilkS") (width 0.15) (tstamp 9d0bbe6a-52b6-4f0e-b323-8752908fbbd2)) (fp_line (start -1.95 -5.85) (end -1.95 -1.85) (layer "F.SilkS") (width 0.15) (tstamp aafd9c43-297b-4b7b-9102-505f1d458e12)) (pad "1" smd rect locked (at -4.2 -4.1) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 153 "Net-(C149-Pad1)") (pinfunction "AA") (pintype "passive") (tstamp 87e866f2-79e1-4dc1-bf55-b8db3a973f5b)) + (net 152 "Net-(C149-Pad1)") (pinfunction "AA") (pintype "passive") (tstamp 87e866f2-79e1-4dc1-bf55-b8db3a973f5b)) (pad "2" smd rect locked (at -4.2 3.9) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 150 "Net-(C147-Pad2)") (pinfunction "AB") (pintype "passive") (tstamp 10e4097c-af47-4d13-bf85-49c366a07a33)) + (net 149 "Net-(C147-Pad2)") (pinfunction "AB") (pintype "passive") (tstamp 10e4097c-af47-4d13-bf85-49c366a07a33)) (pad "3" smd rect locked (at 4.2 -4.1) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 153 "Net-(C149-Pad1)") (pinfunction "SA") (pintype "passive") (tstamp 5e728753-883d-463b-9c9d-8b3c8377b426)) + (net 152 "Net-(C149-Pad1)") (pinfunction "SA") (pintype "passive") (tstamp 5e728753-883d-463b-9c9d-8b3c8377b426)) (pad "4" smd rect locked (at 4.2 3.9) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 152 "Net-(C148-Pad2)") (pinfunction "SB") (pintype "passive") (tstamp 4ef39078-b5ea-4fad-b2bc-df399bb5b96f)) + (net 151 "Net-(C148-Pad2)") (pinfunction "SB") (pintype "passive") (tstamp 4ef39078-b5ea-4fad-b2bc-df399bb5b96f)) ) (footprint "Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder" (layer "F.Cu") @@ -4250,7 +4384,7 @@ (fp_line (start -1.6 1.25) (end -1.6 -1.25) (layer "F.Fab") (width 0.1) (tstamp ce5965b7-ec96-430f-bd28-3a92048a334f)) (fp_line (start 1.6 1.25) (end -1.6 1.25) (layer "F.Fab") (width 0.1) (tstamp e2b8344c-984a-4d04-a36c-32b60919f2ce)) (pad "1" smd roundrect (at -1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) - (net 171 "/Control on separate board/5V") (pintype "passive") (tstamp e1e460bc-77af-4f39-8076-56e48cb256ef)) + (net 170 "/Control on separate board/5V") (pintype "passive") (tstamp e1e460bc-77af-4f39-8076-56e48cb256ef)) (pad "2" smd roundrect (at 1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) (net 2 "GND") (pintype "passive") (tstamp 65199f65-402c-44b0-b800-ff950745008b)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" @@ -4290,7 +4424,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 22313528-8bf9-4414-b626-b62f0b33327c) - (at 118.86 -66.41) + (at -14.15 33.696) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM188R71H104KA93D") @@ -4334,7 +4468,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 2233d089-3a5c-47e8-97c3-4821d29727b0) - (at 365.954 -43.104) + (at 160.595 212.801) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM188R71H104KA93D") @@ -4368,7 +4502,7 @@ (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 85a2abe1-e801-4a0e-a18e-85ddcbf72c90)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 159 "Net-(C161-Pad2)") (pintype "passive") (tstamp 6c534003-eff5-4a7e-bc71-187544ace3ab)) + (net 158 "Net-(C161-Pad2)") (pintype "passive") (tstamp 6c534003-eff5-4a7e-bc71-187544ace3ab)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -4421,7 +4555,7 @@ (footprint "Connector_Audio:Jack_3.5mm_CUI_SJ-3524-SMT_Horizontal" (layer "F.Cu") (tedit 5C635470) (tstamp 2289216c-54a4-435e-a3c4-03fa49ea07bd) - (at 107.315 122.555 90) + (at 259.492 122.542 90) (descr "3.5 mm, Stereo, Right Angle, Surface Mount (SMT), Audio Jack Connector (https://www.cui.com/product/resource/sj-352x-smt-series.pdf)") (tags "3.5mm audio cui horizontal jack stereo") (property "MPN" "SJ-3524-SMT-TR") @@ -4471,13 +4605,13 @@ (pad "" np_thru_hole circle (at 0 -2.5 90) (size 1.7 1.7) (drill 1.7) (layers *.Cu *.Mask) (tstamp 0d4fe96d-41a9-4a6e-b9ab-21f611b7addb)) (pad "" np_thru_hole circle (at 0 4.5 90) (size 1.7 1.7) (drill 1.7) (layers *.Cu *.Mask) (tstamp 69413270-dbfd-48f6-aa5c-6f0cbaba1706)) (pad "R" smd rect (at 3.7 -1.6 90) (size 2.8 2.2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 223 "Net-(J4-PadR)") (pintype "passive") (tstamp a43cafa1-b44c-4af8-b750-d20f11682e88)) + (net 222 "Net-(J4-PadR)") (pintype "passive") (tstamp a43cafa1-b44c-4af8-b750-d20f11682e88)) (pad "S" smd rect (at -3.7 -3.6 90) (size 2.8 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pintype "passive") (tstamp 820f2511-f28f-43a2-8c13-a4efc08995d8)) (pad "T" smd rect (at -3.7 5.8 90) (size 2.8 2.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 223 "Net-(J4-PadR)") (pintype "passive") (tstamp 2cbae75a-1ff3-43a4-8808-40bd53d17f0b)) + (net 222 "Net-(J4-PadR)") (pintype "passive") (tstamp 2cbae75a-1ff3-43a4-8808-40bd53d17f0b)) (pad "TN" smd rect (at 0.75 9.8 90) (size 2.8 2.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 224 "Net-(J4-PadTN)") (pintype "passive") (tstamp 0a779efe-3c6d-4fb7-a3da-895f381cdc61)) + (net 223 "Net-(J4-PadTN)") (pintype "passive") (tstamp 0a779efe-3c6d-4fb7-a3da-895f381cdc61)) (model "${KICAD6_3DMODEL_DIR}/Connector_Audio.3dshapes/Jack_3.5mm_CUI_SJ-3524-SMT_Horizontal.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -4574,7 +4708,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 243293a1-a967-4e4a-8317-61ba2ee39da7) - (at 219.242 -44.842) + (at 156.718 -29.718) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A103KXJTBC") @@ -4606,9 +4740,9 @@ (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 3d20260d-7e10-4ef5-9eb8-e8da114d8a3f)) (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp ef99d847-0a50-41fb-8b89-b71fda9b13f6)) (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 110 "Net-(C100-Pad2)") (pintype "passive") (tstamp 2433493f-1b2d-4200-a474-65fefb8c931e)) + (net 109 "Net-(C100-Pad2)") (pintype "passive") (tstamp 2433493f-1b2d-4200-a474-65fefb8c931e)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 112 "Net-(C102-Pad2)") (pintype "passive") (tstamp 96d1b128-39a2-4011-baa4-b0e89e756ca6)) + (net 111 "Net-(C102-Pad2)") (pintype "passive") (tstamp 96d1b128-39a2-4011-baa4-b0e89e756ca6)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -4654,7 +4788,7 @@ (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp d234dad9-c6eb-4a6f-88b2-d74b978ca1a9)) (fp_line (start 1.27 1.27) (end -1.27 1.27) (layer "F.Fab") (width 0.1) (tstamp ef38be85-c812-448c-98da-75f9a653b18f)) (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 215 "Net-(FB1-Pad2)") (pinfunction "Pin_1") (pintype "passive") (tstamp 3dbd57e5-a9f9-4ed9-8d4c-fdf8e4d4e2b5)) + (net 214 "Net-(FB1-Pad2)") (pinfunction "Pin_1") (pintype "passive") (tstamp 3dbd57e5-a9f9-4ed9-8d4c-fdf8e4d4e2b5)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x01_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -4664,7 +4798,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp 24cf62dd-11dd-4019-8e8e-da3c578b52ac) - (at 154.305 33.02) + (at 158.885 32.964) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -4727,9 +4861,9 @@ (fp_line (start -0.325 -1.45) (end 0.65 -1.45) (layer "F.Fab") (width 0.1) (tstamp d5fbdfd4-2905-4d9e-bf69-4d4d2016ae92)) (fp_line (start 0.65 1.45) (end -0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp f32a5d83-adba-461d-aea0-378d9769e47b)) (pad "1" smd roundrect (at -0.9375 -0.95 270) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 312 "Net-(Q21-Pad1)") (pinfunction "B") (pintype "input") (tstamp 678faa75-5f31-4e9f-bc80-9e474cade371)) + (net 311 "Net-(Q21-Pad1)") (pinfunction "B") (pintype "input") (tstamp 678faa75-5f31-4e9f-bc80-9e474cade371)) (pad "2" smd roundrect (at -0.9375 0.95 270) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 311 "Net-(Q20-Pad1)") (pinfunction "E") (pintype "passive") (tstamp 0f0b2332-f473-454d-9e50-cd0cdefaa810)) + (net 310 "Net-(Q20-Pad1)") (pinfunction "E") (pintype "passive") (tstamp 0f0b2332-f473-454d-9e50-cd0cdefaa810)) (pad "3" smd roundrect (at 0.9375 0 270) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 88 "Net-(C74-Pad2)") (pinfunction "C") (pintype "passive") (tstamp 8233f920-a5ec-4de3-8610-66691d8bba74)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" @@ -4802,13 +4936,13 @@ (fp_line (start 14.2 -3.7) (end 0.8 -3.7) (layer "F.Fab") (width 0.1) (tstamp d325045f-6cc3-48a2-a004-6f6b5e4033ae)) (fp_circle (center 7.5 2.5) (end 10.5 2.5) (layer "F.Fab") (width 0.1) (fill none) (tstamp 39cf85ec-83d4-4bda-aa79-dface07bf264)) (pad "A" thru_hole circle (at 0 0 270) (size 1.524 1.524) (drill 1) (layers *.Cu *.Mask) - (net 338 "Net-(R160-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 8e7137a1-844f-4c2c-892a-00e58d0d4ab1)) + (net 337 "Net-(R160-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 8e7137a1-844f-4c2c-892a-00e58d0d4ab1)) (pad "B" thru_hole circle (at 0 5 270) (size 1.524 1.524) (drill 1) (layers *.Cu *.Mask) - (net 339 "Net-(R161-Pad2)") (pinfunction "B") (pintype "passive") (tstamp 74a36e7c-3d27-4f05-bd53-a3d49330e1dd)) + (net 338 "Net-(R161-Pad2)") (pinfunction "B") (pintype "passive") (tstamp 74a36e7c-3d27-4f05-bd53-a3d49330e1dd)) (pad "C" thru_hole circle (at 0 2.5 270) (size 1.524 1.524) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "C") (pintype "passive") (tstamp f35e460b-78cf-4de0-8f5d-014843b32d6f)) (pad "S1" thru_hole circle (at 14.5 0 270) (size 1.524 1.524) (drill 1) (layers *.Cu *.Mask) - (net 344 "Net-(R168-Pad1)") (pinfunction "S1") (pintype "passive") (tstamp 30f76627-8aae-4ab8-ae96-1a9a3588a91c)) + (net 343 "Net-(R168-Pad1)") (pinfunction "S1") (pintype "passive") (tstamp 30f76627-8aae-4ab8-ae96-1a9a3588a91c)) (pad "S2" thru_hole circle (at 14.5 5 270) (size 1.524 1.524) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "S2") (pintype "passive") (tstamp f30c4e38-992e-4082-95ee-84f370d6314b)) (pad "SH" thru_hole oval (at 7.5 9.1 270) (size 2.9 3) (drill oval 2.1 2.2) (layers *.Cu *.Mask) (tstamp 08e811e0-43d0-4093-bcb2-a43d7960b0dc)) @@ -4820,38 +4954,100 @@ ) ) - (footprint "mpb:AirCoil-8mm" (layer "F.Cu") + (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEF0) (tstamp 254685fd-bda5-4212-8795-50640f43e7df) + (at 228.092 -6.604 -90) + (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") + (tags "inductor handsolder") + (property "MPN" "LQW2UASR56") + (property "Need_order" "1") + (property "Sheetfile" "frontend_70.kicad_sch") + (property "Sheetname" "70MHz VHF Frontend") + (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/fd2dadcf-a7f1-4080-a41e-3de02cecc7c6") + (attr smd) + (fp_text reference "L31" (at 0 -2.05 90) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp fec536fd-44fe-44ab-a66a-c3b7d01b665f) + ) + (fp_text value "56nH" (at 0 2.05 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 7def057d-8f35-4d11-824b-4ecd7605cf1c) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.62 0.62) (thickness 0.09))) + (tstamp 99e60eef-3bd4-48f2-8f78-9ae1e755e7c2) + ) + (fp_line (start -0.261252 -1.11) (end 0.261252 -1.11) (layer "F.SilkS") (width 0.12) (tstamp 558f30b2-8e10-4180-8ddc-9c20671bce6b)) + (fp_line (start -0.261252 1.11) (end 0.261252 1.11) (layer "F.SilkS") (width 0.12) (tstamp 67d3fa77-934f-410d-85af-6296b4342000)) + (fp_line (start -2.12 1.35) (end -2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 15928838-4393-461f-b217-88b3e5f4aaf2)) + (fp_line (start 2.12 1.35) (end -2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp 34629c61-5cab-4e5d-b05d-293fed1f2195)) + (fp_line (start -2.12 -1.35) (end 2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 7342a9c4-c2df-4092-9faa-79b294682154)) + (fp_line (start 2.12 -1.35) (end 2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp eb879377-c4ab-41f1-b4e4-02c7c6544666)) + (fp_line (start 1.25 -1) (end 1.25 1) (layer "F.Fab") (width 0.1) (tstamp 0584d191-4d7b-4342-b72b-b00bf45a3707)) + (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 4d1ee4c7-303d-478b-9beb-b64ef8045dfa)) + (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 5e4ba661-fce7-4366-8fef-38927d93e680)) + (fp_line (start 1.25 1) (end -1.25 1) (layer "F.Fab") (width 0.1) (tstamp 916a450f-a77e-409a-8d59-3d15393ba876)) + (pad "1" smd roundrect (at -1.1625 0 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 112 "Net-(C103-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 347926ba-ff03-4658-9015-44f418d3e337)) + (pad "2" smd roundrect (at 1.1625 0 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 374 "Net-(L31-Pad2)") (pinfunction "2") (pintype "passive") (tstamp a89be89c-b875-4aab-adeb-ef57971adcba)) + (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "mpb:AirCoil-8mm-or-2-series-1008" (layer "F.Cu") (tedit 5E4EB890) (tstamp 2599b5e9-8a6e-4c71-852b-c19eafc55102) - (at 221.522 -55.932) - (property "MPN" "") - (property "Need_order" "0") + (at 111.286 -45.518) + (property "MPN" "2x LQW2UASR56") + (property "Need_order" "1") (property "Sheetfile" "frontend_70.kicad_sch") (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/9b0085fd-b0c9-494f-b8af-530ec0ab6b98") (attr through_hole) - (fp_text reference "L32" (at 1.5 0 90) (layer "F.SilkS") + (fp_text reference "L32" (at 2.5 0 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) - (tstamp d6d9baf1-7fd8-4ef1-8f57-f16e14c5367c) + (tstamp 625611e7-9b97-4f1f-90c3-583b36296b0a) ) (fp_text value "110nH" (at -2.5 0 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) - (tstamp ed2f5346-4b24-4c39-a56b-5887cc1a247d) - ) - (fp_line (start 3.5 -6) (end -3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp 0c6148b9-fa32-4b1d-b5d7-bb76077c24f9)) - (fp_line (start -3.5 -6) (end -3.5 6) (layer "F.SilkS") (width 0.15) (tstamp 1882b130-b632-42da-b883-7b6d083fdd34)) - (fp_line (start -3.5 6) (end 3.5 6) (layer "F.SilkS") (width 0.15) (tstamp 82dd0653-2f03-4227-9572-393b7b8b90db)) - (fp_line (start 3.5 6) (end 3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp b89f93d6-c7ce-4d79-b8d9-10d90d6f2a9c)) - (fp_arc (start 0 3) (mid -1.5 1.5) (end 0 0) (layer "F.SilkS") (width 0.15) (tstamp 2ff3a82b-1521-4403-8634-08aac6b83992)) - (fp_arc (start 0 0) (mid -1.5 -1.5) (end 0 -3) (layer "F.SilkS") (width 0.15) (tstamp 809ee833-7e0f-4260-bd86-35099bcbfa69)) + (tstamp 3c98bc54-cf72-4c7a-b3a8-d0caf054a524) + ) + (fp_line (start 3.5 -6) (end -3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp 25f5d1e6-f31d-4544-82d0-c0d9eb41d54a)) + (fp_line (start 3.5 6) (end 3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp 9267d61b-a60f-461d-8f5b-8b6dafae4874)) + (fp_line (start -3.5 -6) (end -3.5 6) (layer "F.SilkS") (width 0.15) (tstamp d833ff87-2168-488c-a148-74049d1d5044)) + (fp_line (start -3.5 6) (end 3.5 6) (layer "F.SilkS") (width 0.15) (tstamp eef9a051-5842-4edd-a969-01c57097509a)) + (fp_arc (start -1.1 0) (mid -2.6 -1.5) (end -1.1 -3) (layer "F.SilkS") (width 0.15) (tstamp 7414c033-4f96-4663-8d33-4b2c23ebeaa2)) + (fp_arc (start -1.1 3) (mid -2.6 1.5) (end -1.1 0) (layer "F.SilkS") (width 0.15) (tstamp e5947667-7d17-491e-8cce-db970a7b0214)) + (fp_line (start -3.3 -5.8) (end 3.3 -5.8) (layer "F.CrtYd") (width 0.05) (tstamp 4709c0a6-4b78-4b98-80ad-0ee2a2631f43)) + (fp_line (start 3.3 5.8) (end -3.3 5.8) (layer "F.CrtYd") (width 0.05) (tstamp 63505330-ff83-43e4-8ebf-cae5acaaf939)) + (fp_line (start 3.3 5.8) (end 3.3 -5.8) (layer "F.CrtYd") (width 0.05) (tstamp 9badf855-52c4-407e-8cb6-ac60cb811a33)) + (fp_line (start -3.3 5.8) (end -3.3 -5.8) (layer "F.CrtYd") (width 0.05) (tstamp b4a07a05-65a7-4205-93f2-ea381c23d109)) + (fp_line (start 1.05 0.23) (end 1.05 2.73) (layer "F.Fab") (width 0.1) (tstamp 135db563-43ca-495e-9a7a-ada876742c89)) + (fp_line (start -0.95 0.23) (end 1.05 0.23) (layer "F.Fab") (width 0.1) (tstamp 29bf3307-8335-4873-ba6e-e9ed039bcccd)) + (fp_line (start -0.95 -2.87) (end 1.05 -2.87) (layer "F.Fab") (width 0.1) (tstamp 2cba1baa-869b-4fad-ab6b-27566bf0ed86)) + (fp_line (start -0.95 -0.37) (end -0.95 -2.87) (layer "F.Fab") (width 0.1) (tstamp 608afd7e-499d-4474-9879-5cfc82f21d3e)) + (fp_line (start -0.95 2.73) (end -0.95 0.23) (layer "F.Fab") (width 0.1) (tstamp 7f5a8157-ceb4-4aa6-9865-4d8bfb24f990)) + (fp_line (start 1.05 2.73) (end -0.95 2.73) (layer "F.Fab") (width 0.1) (tstamp baa508a9-65e6-4511-9e11-002ca9b52823)) + (fp_line (start 1.05 -2.87) (end 1.05 -0.37) (layer "F.Fab") (width 0.1) (tstamp d1366447-5545-413a-95d2-70306f7a4eba)) + (fp_line (start 1.05 -0.37) (end -0.95 -0.37) (layer "F.Fab") (width 0.1) (tstamp d19c306d-f529-4ccf-9240-8abc54989cdd)) + (pad "" smd roundrect (at 0.05 0.3175 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp 1e1c5db9-73e1-4db0-8a5a-1ace2b148080)) + (pad "" smd roundrect (at 0.05 -0.4575 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp e07d2ee2-a046-440f-92de-e5726bff737a)) (pad "1" thru_hole circle (at 0 -4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 122 "Net-(C112-Pad2)") (pinfunction "1") (pintype "passive") (tstamp e965c997-28af-4b8b-b03a-de7110214f44)) + (net 121 "Net-(C112-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 2bcd8c23-bcfe-4360-8222-82a06f191178)) + (pad "1" smd roundrect (at 0.05 -2.7825 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 121 "Net-(C112-Pad2)") (pinfunction "1") (pintype "passive") (tstamp c7902758-a509-4cfb-8741-0184bbc6b78d)) + (pad "2" smd roundrect (at 0.05 2.6425 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 02e3ee15-73a0-492e-8fee-7a416e579a9c)) (pad "2" thru_hole circle (at 0 4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 50b5e29a-a066-42db-a133-462f4214c018)) + (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 03bcb051-3559-4dbd-9149-99c4303ddb17)) ) (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 27f34fb9-e0e2-4136-b89f-8e26dbcf80b6) - (at 199.912 -15.012) + (at 237.871 -12.192 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -4881,9 +5077,9 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 3628d22b-74cc-4ef1-9488-2d13163105de)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 9b780c90-4269-4551-baa8-8045cbc0943f)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp bbe24da8-71a5-49b5-9580-8d6fb02b954c)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 123 "Net-(C114-Pad2)") (pintype "passive") (tstamp 928ee00f-cd73-4db0-be0d-2d66ff0643c0)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 122 "Net-(C114-Pad2)") (pintype "passive") (tstamp 928ee00f-cd73-4db0-be0d-2d66ff0643c0)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 7d6b3212-2c56-4d28-b43f-5ca101ea2122)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) @@ -4937,7 +5133,7 @@ (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 2a70ac32-5484-4335-a775-b79aa87d878b) - (at 190.922 -27.882) + (at 163.068 -29.718) (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2UAS1R0x0CL") @@ -4969,9 +5165,9 @@ (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 6ca3ba08-8649-4357-94bc-ca81e7a10ce9)) (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 7dad1284-f626-41bd-a825-5bed284a9767)) (pad "1" smd roundrect (at -1.1625 0) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 112 "Net-(C102-Pad2)") (pinfunction "1") (pintype "passive") (tstamp bacdef36-8151-44c5-b69a-554bfbdb06be)) + (net 111 "Net-(C102-Pad2)") (pinfunction "1") (pintype "passive") (tstamp bacdef36-8151-44c5-b69a-554bfbdb06be)) (pad "2" smd roundrect (at 1.1625 0) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 115 "Net-(C106-Pad1)") (pinfunction "2") (pintype "passive") (tstamp eed7362b-76a0-45d6-a297-bb5c90136eb5)) + (net 114 "Net-(C106-Pad1)") (pinfunction "2") (pintype "passive") (tstamp eed7362b-76a0-45d6-a297-bb5c90136eb5)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -4979,33 +5175,51 @@ ) ) - (footprint "mpb:AirCoil-8mm" (layer "F.Cu") + (footprint "mpb:AirCoil-8mm-or-2-series-1008" (layer "F.Cu") (tedit 5E4EB890) (tstamp 2ab86cba-841f-4e44-8708-8e6901f869ce) - (at 207.952 -42.782) - (property "MPN" "") - (property "Need_order" "0") + (at 97.716 -32.368) + (property "MPN" "2x LQW2UASR56") + (property "Need_order" "1") (property "Sheetfile" "frontend_70.kicad_sch") (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/98f20cbd-51ca-49ad-9943-66c2345d9535") (attr through_hole) - (fp_text reference "L35" (at 1.5 0 90) (layer "F.SilkS") + (fp_text reference "L35" (at 2.5 0 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) - (tstamp 52b327bb-d4b4-4376-a10c-e304cfdacd08) + (tstamp 4118f0be-aed2-4ef4-b2d7-bd4024fe129d) ) (fp_text value "110nH" (at -2.5 0 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) - (tstamp ece64cab-48ca-43c2-9049-9a425390f923) - ) - (fp_line (start -3.5 6) (end 3.5 6) (layer "F.SilkS") (width 0.15) (tstamp 4b763e50-1d55-4b5e-b159-f637ceca7901)) - (fp_line (start -3.5 -6) (end -3.5 6) (layer "F.SilkS") (width 0.15) (tstamp 8a37baad-7c8e-451d-9060-9fa3bba2c20e)) - (fp_line (start 3.5 6) (end 3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp aa9527f9-0f22-43b9-82bd-6cda5cc35b48)) - (fp_line (start 3.5 -6) (end -3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp c64194de-734c-4709-a2da-cf2959e5f15e)) - (fp_arc (start 0 3) (mid -1.5 1.5) (end 0 0) (layer "F.SilkS") (width 0.15) (tstamp bfb7b875-b3c0-4c2d-9db8-0c214f895382)) - (fp_arc (start 0 0) (mid -1.5 -1.5) (end 0 -3) (layer "F.SilkS") (width 0.15) (tstamp c1b3e174-1646-4533-aa5f-60412eaf8e92)) + (tstamp c59eede6-ca3e-44ad-a7c3-09897cee692b) + ) + (fp_line (start -3.5 -6) (end -3.5 6) (layer "F.SilkS") (width 0.15) (tstamp 59b20c21-08f7-4f42-8c47-f2c9154984df)) + (fp_line (start 3.5 6) (end 3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp 7fe04b7d-09c2-4c1d-9e79-61c7cdf55821)) + (fp_line (start 3.5 -6) (end -3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp b6e13d57-9a57-4c3d-8956-fcb874beb80e)) + (fp_line (start -3.5 6) (end 3.5 6) (layer "F.SilkS") (width 0.15) (tstamp d55296d4-b298-482c-a459-fe93c2eed05f)) + (fp_arc (start -1.1 0) (mid -2.6 -1.5) (end -1.1 -3) (layer "F.SilkS") (width 0.15) (tstamp 2b11bfa5-ecd4-4add-b602-2ef2bcad1daa)) + (fp_arc (start -1.1 3) (mid -2.6 1.5) (end -1.1 0) (layer "F.SilkS") (width 0.15) (tstamp b6e1a917-3c7e-45de-aa0e-8893d83268aa)) + (fp_line (start -3.3 5.8) (end -3.3 -5.8) (layer "F.CrtYd") (width 0.05) (tstamp 99ccd3a4-fc28-47c7-9ea1-6338b9fba4d0)) + (fp_line (start 3.3 5.8) (end 3.3 -5.8) (layer "F.CrtYd") (width 0.05) (tstamp d55041fd-222d-4379-ace9-7bb3a66b6be9)) + (fp_line (start 3.3 5.8) (end -3.3 5.8) (layer "F.CrtYd") (width 0.05) (tstamp d8e71d0b-5b77-4550-b0ae-5eff7274c68c)) + (fp_line (start -3.3 -5.8) (end 3.3 -5.8) (layer "F.CrtYd") (width 0.05) (tstamp e39e9226-d997-474e-94db-51a0506120e7)) + (fp_line (start 1.05 2.73) (end -0.95 2.73) (layer "F.Fab") (width 0.1) (tstamp 0410adbe-5676-4850-957e-2d43ab638149)) + (fp_line (start -0.95 2.73) (end -0.95 0.23) (layer "F.Fab") (width 0.1) (tstamp 128eec9b-f95f-4e3e-b0f4-b7fdbdb98e32)) + (fp_line (start 1.05 -2.87) (end 1.05 -0.37) (layer "F.Fab") (width 0.1) (tstamp 212f8180-420c-4a86-822e-f70e350dbfaa)) + (fp_line (start -0.95 0.23) (end 1.05 0.23) (layer "F.Fab") (width 0.1) (tstamp 2a1c95f4-ca11-4b23-9d65-efa5babfcc11)) + (fp_line (start 1.05 0.23) (end 1.05 2.73) (layer "F.Fab") (width 0.1) (tstamp 3a2eae88-2926-4a1f-97d3-1f4c2ec210db)) + (fp_line (start -0.95 -2.87) (end 1.05 -2.87) (layer "F.Fab") (width 0.1) (tstamp 8add5541-843b-436e-895e-884809daaf70)) + (fp_line (start -0.95 -0.37) (end -0.95 -2.87) (layer "F.Fab") (width 0.1) (tstamp 8eece01e-4e0b-4ca6-ab47-1e8994f7affb)) + (fp_line (start 1.05 -0.37) (end -0.95 -0.37) (layer "F.Fab") (width 0.1) (tstamp 8f497665-6028-45f7-b81b-e5ef68d93b9a)) + (pad "" smd roundrect (at 0.05 0.3175 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp a1efff23-2db1-4369-abee-97903bdab860)) + (pad "" smd roundrect (at 0.05 -0.4575 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp fbbe65dc-1323-4b79-b66e-2f4f850becbb)) + (pad "1" smd roundrect (at 0.05 -2.7825 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 129 "Net-(C121-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 4de6c6d8-5080-4f3a-8fc2-9327656edfd4)) (pad "1" thru_hole circle (at 0 -4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 130 "Net-(C121-Pad1)") (pinfunction "1") (pintype "passive") (tstamp a3b4e008-f3c3-4a19-a0ad-f9b68769ad61)) + (net 129 "Net-(C121-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 85a8695f-c797-4c57-a94e-a877e143b672)) (pad "2" thru_hole circle (at 0 4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp a884f91e-2f48-44af-b12c-144e4b4b4271)) + (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 2df3161d-b1d5-4b72-a902-0d8f1312184a)) + (pad "2" smd roundrect (at 0.05 2.6425 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 5615a937-1821-4410-af7f-cdbfb2d35f54)) ) (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") @@ -5041,9 +5255,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c2a496d7-08e2-4490-a0bf-2b34d16d7d47)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp f94bb262-9184-4890-bce9-8795f9fb13e5)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 342 "/Control on separate board/BTN2") (pintype "passive") (tstamp 152ce48c-3f37-418d-94ae-8a0dfac55bba)) + (net 341 "/Control on separate board/BTN2") (pintype "passive") (tstamp 152ce48c-3f37-418d-94ae-8a0dfac55bba)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 47756563-9317-4e3d-aa42-2a5f91898b51)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 47756563-9317-4e3d-aa42-2a5f91898b51)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -5053,7 +5267,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 2ae4d229-4866-4747-963b-44872aa382e3) - (at 343.904 -21.814) + (at 138.545 234.091) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -5084,9 +5298,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 9d49aaca-2d20-4b70-84fb-624cb50fd0ae)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp dfb4f455-728e-44e2-9c00-14caac9cbfa6)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 333 "Net-(R135-Pad1)") (pintype "passive") (tstamp 5f1beaf3-6f50-45c9-bdda-61743f7fd7e4)) + (net 332 "Net-(R135-Pad1)") (pintype "passive") (tstamp 5f1beaf3-6f50-45c9-bdda-61743f7fd7e4)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 139 "Net-(C136-Pad2)") (pintype "passive") (tstamp 2c172efb-cf07-4470-a7b2-98911617accb)) + (net 138 "Net-(C136-Pad2)") (pintype "passive") (tstamp 2c172efb-cf07-4470-a7b2-98911617accb)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -5128,7 +5342,7 @@ (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 7e830708-e439-43fe-b7c3-af08545e57bb)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp f28c77fd-94b0-44d1-b45a-9d7adb42107d)) (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 9ead37b9-87bc-42ce-994f-2f211faa1e30)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 9ead37b9-87bc-42ce-994f-2f211faa1e30)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp b1dd1e78-94ae-4c2f-9fcd-6d04130355d1)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" @@ -5179,9 +5393,9 @@ (pad "2" smd roundrect (at -2.475 -0.635 180) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 31 "Net-(C25-Pad2)") (pinfunction "VIN") (pintype "input") (tstamp 68415cf7-fd4b-43b5-a7ca-64beadc6cd3e)) (pad "3" smd roundrect (at -2.475 0.635 180) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 322 "Net-(R28-Pad2)") (pinfunction "HPSense") (pintype "input") (tstamp 1358ae0b-dafc-4447-827b-e243942998f8)) + (net 321 "Net-(R28-Pad2)") (pinfunction "HPSense") (pintype "input") (tstamp 1358ae0b-dafc-4447-827b-e243942998f8)) (pad "4" smd roundrect (at -2.475 1.905 180) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 250 "/Baseband/SPKR_VOL") (pinfunction "Vol/SDn") (pintype "input") (tstamp 1486ce01-23a6-4447-8b15-3a8b7415607c)) + (net 249 "/Baseband/SPKR_VOL") (pinfunction "Vol/SDn") (pintype "input") (tstamp 1486ce01-23a6-4447-8b15-3a8b7415607c)) (pad "5" smd roundrect (at 2.475 1.905 180) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 45 "Net-(C42-Pad1)") (pinfunction "VO1") (pintype "output") (tstamp 54bc5938-5003-4cf2-bd2d-f45ad1c7b557)) (pad "6" smd roundrect (at 2.475 0.635 180) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) @@ -5189,7 +5403,7 @@ (pad "7" smd roundrect (at 2.475 -0.635 180) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 40 "Net-(C37-Pad1)") (pinfunction "BYPASS") (pintype "passive") (tstamp d7cc272a-65e3-48fa-8bfd-9d79622ee99d)) (pad "8" smd roundrect (at 2.475 -1.905 180) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 262 "Net-(J22-Pad2)") (pinfunction "VO2") (pintype "output") (tstamp 82cbb61c-3f15-46f6-9364-98b2ca4169b2)) + (net 261 "Net-(J22-Pad2)") (pinfunction "VO2") (pintype "output") (tstamp 82cbb61c-3f15-46f6-9364-98b2ca4169b2)) (model "${KICAD6_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -5247,9 +5461,9 @@ (pad "1" thru_hole circle (at 6.5 0 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "1") (pintype "passive") (tstamp a4f2c568-d826-4f41-93d6-c51a45bc8cc9)) (pad "2" thru_hole circle (at 6.5 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) - (net 343 "/Control on separate board/BTN3") (pinfunction "2") (pintype "passive") (tstamp 3a05672c-22da-4bf8-9c56-2a7eaccc8615)) + (net 342 "/Control on separate board/BTN3") (pinfunction "2") (pintype "passive") (tstamp 3a05672c-22da-4bf8-9c56-2a7eaccc8615)) (pad "2" thru_hole circle (at 0 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) - (net 343 "/Control on separate board/BTN3") (pinfunction "2") (pintype "passive") (tstamp 6b04483d-b447-42d7-a8b4-94b61b98edb9)) + (net 342 "/Control on separate board/BTN3") (pinfunction "2") (pintype "passive") (tstamp 6b04483d-b447-42d7-a8b4-94b61b98edb9)) (model "${KICAD6_3DMODEL_DIR}/Button_Switch_THT.3dshapes/SW_PUSH_6mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -5303,7 +5517,7 @@ (footprint "mpb:two_2mm_pads" (layer "F.Cu") (tedit 5FB8F550) (tstamp 2c6a2595-2a50-4131-9f91-b9b112699b73) - (at 316.684 -20.129) + (at 111.325 235.776) (property "Need_order" "0") (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") @@ -5322,9 +5536,9 @@ (fp_line (start -1 -0.7) (end 1 -0.7) (layer "F.SilkS") (width 0.15) (tstamp d80ef0de-a3ca-43fb-aaca-116be69ecdff)) (fp_line (start -1 -0.8) (end 1 -0.8) (layer "F.SilkS") (width 0.15) (tstamp fb9fe6d7-8c1d-4496-b277-51c4558d1ee1)) (pad "1" smd rect locked (at 0 -2) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 335 "Net-(J27-Pad1)") (pinfunction "Pin_1") (pintype "passive") (tstamp e968013d-2a21-42cf-978a-7291b395c53d)) + (net 334 "Net-(J27-Pad1)") (pinfunction "Pin_1") (pintype "passive") (tstamp e968013d-2a21-42cf-978a-7291b395c53d)) (pad "2" smd rect locked (at 0 2) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 216 "Net-(FB3-Pad1)") (pinfunction "Pin_2") (pintype "passive") (tstamp 74e9b93c-ed22-4e07-a584-a4eb87e3d05c)) + (net 215 "Net-(FB3-Pad1)") (pinfunction "Pin_2") (pintype "passive") (tstamp 74e9b93c-ed22-4e07-a584-a4eb87e3d05c)) ) (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") @@ -5415,7 +5629,7 @@ (footprint "TestPoint:TestPoint_Pad_D2.0mm" (layer "F.Cu") (tedit 5A0F774F) (tstamp 2d19548d-f0b2-4de1-a6fe-efe592745fc9) - (at 223.012 -33.782) + (at 112.776 -23.368) (descr "SMD pad as test Point, diameter 2.0mm") (tags "test point SMD pad") (property "Sheetfile" "frontend_70.kicad_sch") @@ -5437,12 +5651,12 @@ (fp_circle (center 0 0) (end 0 1.2) (layer "F.SilkS") (width 0.12) (fill none) (tstamp 807d36f7-d36c-407b-9e10-ffd0bc1ba824)) (fp_circle (center 0 0) (end 1.5 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp 1f5f2355-4a55-4370-81da-a0bbbb8566ed)) (pad "1" smd circle (at 0 0) (size 2 2) (layers "F.Cu" "F.Mask") - (net 126 "Net-(C118-Pad2)") (pinfunction "1") (pintype "passive") (tstamp eb418ae1-6408-4b4e-88f9-dd0ff57c3564)) + (net 125 "Net-(C118-Pad2)") (pinfunction "1") (pintype "passive") (tstamp eb418ae1-6408-4b4e-88f9-dd0ff57c3564)) ) (footprint "Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 2d52f979-281c-4c7a-897d-8b46323dd460) - (at 351.544 -40.984) + (at 146.185 214.921) (descr "Resistor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -5473,9 +5687,9 @@ (fp_line (start -1.6 1.245) (end -1.6 -1.245) (layer "F.Fab") (width 0.1) (tstamp 83624cb1-97d0-40e8-8603-d5c2e1183551)) (fp_line (start 1.6 -1.245) (end 1.6 1.245) (layer "F.Fab") (width 0.1) (tstamp ce7fb0df-30c6-43b4-b48a-7a9d1a85612f)) (pad "1" smd roundrect (at -1.55 0) (size 1.3 2.65) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.192308) - (net 335 "Net-(J27-Pad1)") (pintype "passive") (tstamp e16a8baa-5b6a-40cc-88d9-9d8bd4795a37)) + (net 334 "Net-(J27-Pad1)") (pintype "passive") (tstamp e16a8baa-5b6a-40cc-88d9-9d8bd4795a37)) (pad "2" smd roundrect (at 1.55 0) (size 1.3 2.65) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.192308) - (net 216 "Net-(FB3-Pad1)") (pintype "passive") (tstamp 167ce0ff-11ed-4c43-8afd-f076ebfe4dad)) + (net 215 "Net-(FB3-Pad1)") (pintype "passive") (tstamp 167ce0ff-11ed-4c43-8afd-f076ebfe4dad)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_1210_3225Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -5485,7 +5699,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 2e09d8a3-f2d0-4f07-8533-53a936e24d4b) - (at 190.982 -18.482) + (at 267.081 -15.367) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "Need_order" "0") @@ -5516,7 +5730,7 @@ (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 37e72867-2611-4b11-9ef5-9d4dad4b171e)) (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 5a3b5ab1-dd8c-48d8-9b48-b2ee8cb72213)) (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 133 "Net-(C128-Pad1)") (pintype "passive") (tstamp 8247584f-2990-4236-9060-a5746769903b)) + (net 132 "Net-(C128-Pad1)") (pintype "passive") (tstamp 8247584f-2990-4236-9060-a5746769903b)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 74e5b0c7-4c9b-425a-9537-2040fd61e002)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" @@ -5572,7 +5786,7 @@ (footprint "Connector_Coaxial:SMA_Amphenol_132289_EdgeMount" (layer "F.Cu") (tedit 5A1C1810) (tstamp 2eaaddf2-2a1d-4bee-bc5f-b19805ec16c1) - (at 19.885 -20.09) + (at -113.125 80.016) (descr "http://www.amphenolrf.com/132289.html") (tags "SMA") (property "Need_order" "0") @@ -5636,7 +5850,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 2ef69cb0-ff04-4ef9-891b-b5a60efb1388) - (at 339.554 -19.644) + (at 134.195 236.261) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -5667,9 +5881,9 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 3f1f74c8-4a55-471b-9db8-3b636674d2c7)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 53820cee-f307-4126-b4fc-1097db42e43a)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 295 "Net-(L40-Pad2)") (pintype "passive") (tstamp 6493563e-886c-48fa-8c06-0836577b956b)) + (net 294 "Net-(L40-Pad2)") (pintype "passive") (tstamp 6493563e-886c-48fa-8c06-0836577b956b)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 147 "Net-(C144-Pad2)") (pintype "passive") (tstamp 71170343-29c0-4938-8f62-1f5d6998bcd6)) + (net 146 "Net-(C144-Pad2)") (pintype "passive") (tstamp 71170343-29c0-4938-8f62-1f5d6998bcd6)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -5679,7 +5893,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp 304b66ac-86a2-4a91-95a4-36dd929da688) - (at 325.834 -27.204) + (at 120.475 228.701) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -5738,9 +5952,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp d1bfb16b-345d-410a-a177-c25ad4d05ab7)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp e4f431c7-1920-4c53-a2da-953f6f4b459a)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 5f7c0e6f-0f82-4482-9623-e39418609961)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 5f7c0e6f-0f82-4482-9623-e39418609961)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 280 "/Control on separate board/USB_DP") (pintype "passive") (tstamp 1f63d439-577b-4acb-91d5-e0b806397b60)) + (net 279 "/Control on separate board/USB_DP") (pintype "passive") (tstamp 1f63d439-577b-4acb-91d5-e0b806397b60)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -5785,11 +5999,11 @@ (fp_line (start -0.325 -1.45) (end 0.65 -1.45) (layer "F.Fab") (width 0.1) (tstamp 7713fef4-d655-48b6-a339-021c9c416027)) (fp_line (start 0.65 -1.45) (end 0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp c79e2cb7-921e-4ab2-8a1e-ad6fe8534e04)) (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 170 "Net-(C176-Pad1)") (pinfunction "B") (pintype "input") (tstamp 5914dd97-d339-4adb-b2f1-76b1ceb29e9e)) + (net 169 "Net-(C176-Pad1)") (pinfunction "B") (pintype "input") (tstamp 5914dd97-d339-4adb-b2f1-76b1ceb29e9e)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "E") (pintype "passive") (tstamp 78c19095-699a-438c-8b53-b6fe0638b489)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 242 "/Control on separate board/SPKR_VOL") (pinfunction "C") (pintype "passive") (tstamp 843eaee1-178c-497c-aca7-6484e7b57d33)) + (net 241 "/Control on separate board/SPKR_VOL") (pinfunction "C") (pintype "passive") (tstamp 843eaee1-178c-497c-aca7-6484e7b57d33)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -5799,7 +6013,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 316990fb-d0d9-4511-9d91-21dd39e48f49) - (at 218.812 -32.042) + (at 240.665 -18.669 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -5829,10 +6043,10 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 67eb610f-02b6-445c-a80a-39a87072c84c)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp a7c895c2-ba2e-4715-8366-d071a9f94918)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp bb233b81-dfa9-400b-8e69-87b96fb7b5ac)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 120 "Net-(C111-Pad2)") (pintype "passive") (tstamp f98138e3-60ed-4108-be99-ee712b1921fd)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 119 "/70MHz VHF Frontend/+VTX_FE") (pintype "passive") (tstamp b357998c-2ce2-4b5b-ae83-01814adbe6b4)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 119 "Net-(C111-Pad2)") (pintype "passive") (tstamp f98138e3-60ed-4108-be99-ee712b1921fd)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 118 "/70MHz VHF Frontend/+VTX_FE") (pintype "passive") (tstamp b357998c-2ce2-4b5b-ae83-01814adbe6b4)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -5886,7 +6100,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 33b528a0-7996-4265-8839-db0058341d4d) - (at 228.002 -61.002) + (at 246.253 -16.764) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A103KXJTBC") @@ -5920,7 +6134,7 @@ (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 2a77d05b-01a1-4fe3-92f7-95857ff7f9bb)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 131 "Net-(C125-Pad2)") (pintype "passive") (tstamp 93ef5f4d-51e9-41cd-a05b-95fc35a56c78)) + (net 130 "Net-(C125-Pad2)") (pintype "passive") (tstamp 93ef5f4d-51e9-41cd-a05b-95fc35a56c78)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -5930,7 +6144,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 34cf0f4c-a387-4a5d-844b-a0e44fcca6d4) - (at 206.625 54.185) + (at 45.223 145.625) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A680GXAPW1BC") @@ -5974,7 +6188,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp 34f1b470-7380-4475-94a4-4a7409ca7989) - (at 318.684 -27.204) + (at 113.325 228.701) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -6045,7 +6259,7 @@ (pad "1" smd rect (at -1.4 0 90) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") (net 59 "Net-(C50-Pad1)") (pinfunction "K") (pintype "passive") (tstamp e0bc14dc-5fc0-4c2c-aa6e-8c5c6b2b5a49)) (pad "2" smd rect (at 1.4 0 90) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") - (net 178 "Net-(D8-Pad2)") (pinfunction "A") (pintype "passive") (tstamp afb3195d-5758-4d0b-975c-f9a550d414ba)) + (net 177 "Net-(D8-Pad2)") (pinfunction "A") (pintype "passive") (tstamp afb3195d-5758-4d0b-975c-f9a550d414ba)) (model "${KICAD6_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-123F.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -6055,7 +6269,7 @@ (footprint "Inductor_SMD:L_1008_2520Metric" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 354ca958-8613-4907-9ba6-852e2715a96d) - (at 362.034 -51.754) + (at 156.675 204.151) (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") (tags "inductor") (property "MPN" "") @@ -6086,9 +6300,9 @@ (fp_line (start 1.25 -1) (end 1.25 1) (layer "F.Fab") (width 0.1) (tstamp 9df5a1f0-f15b-49d8-a87a-3825c943cbdb)) (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp b8518edd-e58d-4286-bad7-74598fe0da9d)) (pad "1" smd roundrect (at -1.075 0) (size 1.25 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.2) - (net 151 "Net-(C148-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 928fc87f-4570-4f69-89ad-22532cc228ce)) + (net 150 "Net-(C148-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 928fc87f-4570-4f69-89ad-22532cc228ce)) (pad "2" smd roundrect (at 1.075 0) (size 1.25 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.2) - (net 295 "Net-(L40-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 518171a2-bdd9-42af-9dd8-b19980bd2745)) + (net 294 "Net-(L40-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 518171a2-bdd9-42af-9dd8-b19980bd2745)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -6169,7 +6383,7 @@ (footprint "Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical" (layer "F.Cu") (tedit 59FED5CC) (tstamp 3616ff37-e5af-40c6-984a-c212882fb5d3) - (at 194.31 50.8) + (at 32.908 142.24) (descr "Through hole straight pin header, 1x08, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x08 2.54mm single row") (property "MPN" "SSW-108-01-G-S") @@ -6208,17 +6422,17 @@ (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_1") (pintype "passive") (tstamp 94b89678-6d4b-45d8-89c5-bf7d51b02d94)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 264 "Net-(J24-Pad2)") (pinfunction "Pin_2") (pintype "passive") (tstamp 0b8de906-4836-48e3-8ad0-81f97a2f4134)) + (net 263 "Net-(J24-Pad2)") (pinfunction "Pin_2") (pintype "passive") (tstamp 0b8de906-4836-48e3-8ad0-81f97a2f4134)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_3") (pintype "passive") (tstamp fa3bd8b5-6357-49ae-ba7a-420dd8a4a612)) (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 265 "unconnected-(J24-Pad4)") (pinfunction "Pin_4") (pintype "passive+no_connect") (tstamp c4898a7d-f9da-482f-ac9b-6515a2af0fe9)) + (net 264 "unconnected-(J24-Pad4)") (pinfunction "Pin_4") (pintype "passive+no_connect") (tstamp c4898a7d-f9da-482f-ac9b-6515a2af0fe9)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 266 "unconnected-(J24-Pad5)") (pinfunction "Pin_5") (pintype "passive+no_connect") (tstamp 1ffc2d2a-7245-4dea-a9ba-ffd51d6a86e3)) + (net 265 "unconnected-(J24-Pad5)") (pinfunction "Pin_5") (pintype "passive+no_connect") (tstamp 1ffc2d2a-7245-4dea-a9ba-ffd51d6a86e3)) (pad "6" thru_hole oval (at 0 12.7) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_6") (pintype "passive") (tstamp 9a97448f-e4ea-4cdf-a756-b462ec1f8217)) (pad "7" thru_hole oval (at 0 15.24) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 267 "Net-(J24-Pad7)") (pinfunction "Pin_7") (pintype "passive") (tstamp 1dfa06db-d761-4a28-9ef1-6a5bd7bcbeac)) + (net 266 "Net-(J24-Pad7)") (pinfunction "Pin_7") (pintype "passive") (tstamp 1dfa06db-d761-4a28-9ef1-6a5bd7bcbeac)) (pad "8" thru_hole oval (at 0 17.78) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_8") (pintype "passive") (tstamp 3cddf91d-28c6-4c9e-944b-730824bdccb3)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x08_P2.54mm_Vertical.wrl" @@ -6230,7 +6444,7 @@ (footprint "mpb:two_2mm_pads" (layer "F.Cu") (tedit 5FB8F550) (tstamp 36262b2b-7105-49d1-97c6-4f1739c78f26) - (at 319.834 -20.129) + (at 114.475 235.776) (property "Need_order" "0") (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") @@ -6249,14 +6463,14 @@ (fp_line (start 1 -0.8) (end 1 0.8) (layer "F.SilkS") (width 0.15) (tstamp e4f83210-e046-404a-a434-2398d2e8a1a3)) (fp_line (start -1 -0.7) (end 1 -0.7) (layer "F.SilkS") (width 0.15) (tstamp fcd31a79-c34b-4517-8560-741ae55655d4)) (pad "1" smd rect locked (at 0 -2) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 152 "Net-(C148-Pad2)") (pintype "passive") (tstamp d312a37e-f29f-4225-8b09-31ce7e7c07a9)) + (net 151 "Net-(C148-Pad2)") (pintype "passive") (tstamp d312a37e-f29f-4225-8b09-31ce7e7c07a9)) (pad "2" smd rect locked (at 0 2) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 150 "Net-(C147-Pad2)") (pintype "passive") (tstamp a82c234a-4e70-425f-b534-fdea0d874d29)) + (net 149 "Net-(C147-Pad2)") (pintype "passive") (tstamp a82c234a-4e70-425f-b534-fdea0d874d29)) ) (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 37808d06-ee0e-4f6b-a0f7-989d25042de4) - (at 195.562 -18.792) + (at 225.806 -6.096 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -6265,15 +6479,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/a5f496e0-c168-4d74-bef0-fe42117ede94") (attr smd) - (fp_text reference "C105" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "C105" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 109d2e0e-ed26-474f-9f70-cc889e9a329f) ) - (fp_text value "27pF" (at 0 1.43) (layer "F.Fab") + (fp_text value "27pF" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 929e469b-86fc-4239-8e8b-48b02f76e075) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 1262b449-e77c-41c8-bc81-8e1777967a50) ) @@ -6287,10 +6501,10 @@ (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 2a683731-e467-4ea3-8b04-86ff70234a4d)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 33b7e47e-cb9c-4536-9818-1d26c3f0a465)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp dd3f7ecb-395d-49a2-88bb-0fba0d486038)) - (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 5a31abdc-7653-4e4a-a439-227162b3b3c9)) - (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 113 "Net-(C103-Pad1)") (pintype "passive") (tstamp b6d4cf76-49f8-4010-8cb2-d403e4ec1022)) + (pad "2" smd roundrect (at 0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 112 "Net-(C103-Pad1)") (pintype "passive") (tstamp b6d4cf76-49f8-4010-8cb2-d403e4ec1022)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -6331,9 +6545,9 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 81f8d86b-e379-4313-b8d4-d2f037d7bb04)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 91fb1149-c4f2-4434-9956-4b52f5b651ea)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 338 "Net-(R160-Pad1)") (pintype "passive") (tstamp a680aeb0-60ef-4079-a373-34970e6654aa)) + (net 337 "Net-(R160-Pad1)") (pintype "passive") (tstamp a680aeb0-60ef-4079-a373-34970e6654aa)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 1ae5b90b-2c4a-45b9-8bdc-a5f17a7aab55)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 1ae5b90b-2c4a-45b9-8bdc-a5f17a7aab55)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -6343,7 +6557,7 @@ (footprint "mpb:MABA 009488 61HWCA" (layer "F.Cu") (tedit 5C321D62) (tstamp 386851d2-d420-489b-87d2-9c69151d8512) - (at 215.265 88.575 180) + (at 53.863 180.015 180) (tags "balun RF 1:4") (property "MPN" "MABA-009488") (property "Need_order" "1") @@ -6377,11 +6591,11 @@ (pad "1" smd rect (at -1.59 -1.27 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "PR1") (pintype "passive") (clearance 0.2) (tstamp fb0c61e7-fadc-41f2-ab60-c37512d05f99)) (pad "2" smd rect (at -1.59 0 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 355 "unconnected-(T3-Pad2)") (pinfunction "PM") (pintype "passive+no_connect") (clearance 0.2) (tstamp 942279af-d63a-46d9-af5d-69fbabf1b73a)) + (net 354 "unconnected-(T3-Pad2)") (pinfunction "PM") (pintype "passive+no_connect") (clearance 0.2) (tstamp 942279af-d63a-46d9-af5d-69fbabf1b73a)) (pad "3" smd rect (at -1.59 1.27 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 67 "Net-(C56-Pad2)") (pinfunction "PR2") (pintype "passive") (clearance 0.2) (tstamp 648bd02a-a18a-4d8b-91fd-beb3a91fa996)) (pad "4" smd rect (at 1.59 1.27 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 267 "Net-(J24-Pad7)") (pinfunction "S1") (pintype "passive") (clearance 0.2) (tstamp 842ce2e8-7ddc-40cc-a5fa-6860a6282931)) + (net 266 "Net-(J24-Pad7)") (pinfunction "S1") (pintype "passive") (clearance 0.2) (tstamp 842ce2e8-7ddc-40cc-a5fa-6860a6282931)) (pad "5" smd rect (at 1.59 0 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "S2") (pintype "passive") (clearance 0.2) (tstamp d669e6b4-62e0-44bb-ba1e-d50a48d215e0)) (pad "6" smd rect (at 1.59 -1.27 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") @@ -6474,11 +6688,11 @@ (fp_line (start 0.675 -1.1) (end 0.675 1.1) (layer "F.Fab") (width 0.1) (tstamp f6a1c101-37da-4d09-ab4b-6fb01800fc30)) (fp_line (start 0.675 1.1) (end -0.675 1.1) (layer "F.Fab") (width 0.1) (tstamp f8dfb567-8b2d-4ec4-8d66-897cd7dee0f5)) (pad "1" smd rect (at -1.33 -0.65 180) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 187 "Net-(D16-Pad1)") (pintype "passive") (tstamp aacfd2b7-0311-41ac-a8d4-7b6d617a5203)) + (net 186 "Net-(D16-Pad1)") (pintype "passive") (tstamp aacfd2b7-0311-41ac-a8d4-7b6d617a5203)) (pad "2" smd rect (at -1.33 0.65 180) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 188 "Net-(D16-Pad2)") (pintype "passive") (tstamp 24c3229a-362c-433d-a5e8-e0947125135e)) + (net 187 "Net-(D16-Pad2)") (pintype "passive") (tstamp 24c3229a-362c-433d-a5e8-e0947125135e)) (pad "3" smd rect (at 1.33 0 180) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 189 "Net-(D16-Pad3)") (pintype "passive") (tstamp 4cb09ad7-8a7f-4f1c-9c64-60ed92098169)) + (net 188 "Net-(D16-Pad3)") (pintype "passive") (tstamp 4cb09ad7-8a7f-4f1c-9c64-60ed92098169)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-323_SC-70.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -6521,7 +6735,7 @@ (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 59 "Net-(C50-Pad1)") (pintype "passive") (tstamp 5b8ad64d-53cd-43eb-b775-69841133cd57)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 301 "Net-(Q7-Pad1)") (pintype "passive") (tstamp 097dffa4-e0a2-40d6-9b87-2209d6833faf)) + (net 300 "Net-(Q7-Pad1)") (pintype "passive") (tstamp 097dffa4-e0a2-40d6-9b87-2209d6833faf)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -6575,7 +6789,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 3ace8950-97a7-4418-8578-bff32b1e4c00) - (at 218.952 -39.572) + (at 209.55 -6.096 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -6584,15 +6798,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/bfc8acee-68ea-46d2-8c08-07085f120075") (attr smd) - (fp_text reference "C97" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "C97" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 1f66ca99-aa94-480f-8bd4-6f5d9116a5b4) ) - (fp_text value "36pF" (at 0 1.43) (layer "F.Fab") + (fp_text value "36pF" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 96a64080-8d81-4e11-9acb-1dcb85dcd397) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp c8b52b57-882d-47e2-b32f-08a20f24a424) ) @@ -6606,10 +6820,10 @@ (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 5de3f51e-5d28-4dfe-a64d-0c6aa830032c)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp adfde6e8-e7ba-4c07-a83c-85c0a0755031)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp e27998a9-b54c-4ce3-8cf1-e12b668cef5d)) - (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp ce89aabb-106e-421c-bde7-adca70f905bd)) - (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 109 "Net-(C96-Pad2)") (pintype "passive") (tstamp cf742860-c53f-467e-b900-36a6cd2bc433)) + (pad "2" smd roundrect (at 0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 108 "Net-(C96-Pad2)") (pintype "passive") (tstamp cf742860-c53f-467e-b900-36a6cd2bc433)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -6619,7 +6833,7 @@ (footprint "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" (layer "F.Cu") (tedit 5D9F72B1) (tstamp 3ad9bc2d-e00f-4cdb-a7a5-6f6b4e5a7116) - (at 184.352 -19.982) + (at 74.116 -9.568) (descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "SOIC SO") (property "MPN" "IRF7309TRPBF") @@ -6656,19 +6870,19 @@ (pad "1" smd roundrect (at -2.475 -1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "S") (pintype "passive") (tstamp 01b5c297-6f58-437b-bd69-5f4a61cd9165)) (pad "2" smd roundrect (at -2.475 -0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 257 "/70MHz VHF Frontend/EN_VRX") (pinfunction "G") (pintype "input") (tstamp 301cd987-8392-42ca-998b-ef6a7fc21b3f)) + (net 256 "/70MHz VHF Frontend/EN_VRX") (pinfunction "G") (pintype "input") (tstamp 301cd987-8392-42ca-998b-ef6a7fc21b3f)) (pad "3" smd roundrect (at -2.475 0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 315 "/70MHz VHF Frontend/+9V_FE") (pinfunction "1") (pintype "passive") (tstamp a74996ba-0599-4961-be20-c7e760de170f)) + (net 314 "/70MHz VHF Frontend/+9V_FE") (pinfunction "1") (pintype "passive") (tstamp a74996ba-0599-4961-be20-c7e760de170f)) (pad "4" smd roundrect (at -2.475 1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 316 "Net-(Q26-Pad4)") (pinfunction "G") (pintype "input") (tstamp 4bcfe4c5-eaa2-4f90-b36e-eb5d87435c0e)) + (net 315 "Net-(Q26-Pad4)") (pinfunction "G") (pintype "input") (tstamp 4bcfe4c5-eaa2-4f90-b36e-eb5d87435c0e)) (pad "5" smd roundrect (at 2.475 1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 317 "/70MHz VHF Frontend/+VRX_FE") (pinfunction "D") (pintype "passive") (tstamp 3031a140-6716-428d-a718-b00cd7addba8)) + (net 316 "/70MHz VHF Frontend/+VRX_FE") (pinfunction "D") (pintype "passive") (tstamp 3031a140-6716-428d-a718-b00cd7addba8)) (pad "6" smd roundrect (at 2.475 0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 317 "/70MHz VHF Frontend/+VRX_FE") (pinfunction "D") (pintype "passive") (tstamp 08cd8628-fa4a-4c1f-a984-7ec2571b7f88)) + (net 316 "/70MHz VHF Frontend/+VRX_FE") (pinfunction "D") (pintype "passive") (tstamp 08cd8628-fa4a-4c1f-a984-7ec2571b7f88)) (pad "7" smd roundrect (at 2.475 -0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 316 "Net-(Q26-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 3502f210-b582-4c29-947a-8a327918bbc8)) + (net 315 "Net-(Q26-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 3502f210-b582-4c29-947a-8a327918bbc8)) (pad "8" smd roundrect (at 2.475 -1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 316 "Net-(Q26-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 36ccca93-f43f-4299-b5b4-df3bffe222e6)) + (net 315 "Net-(Q26-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 36ccca93-f43f-4299-b5b4-df3bffe222e6)) (model "${KICAD6_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -6678,7 +6892,7 @@ (footprint "Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 3aeb9fc0-1bb9-44eb-abfc-578ef8f2cb01) - (at 105.49 -58.39) + (at -27.52 41.716) (descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "TAJA106K016RNJ") @@ -6754,9 +6968,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp fe2f66d9-186e-44b2-8f79-479862236b2a)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp ff39faad-6f49-4433-91a7-b5a3347a24f5)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp ddc2cc1f-4d2f-4110-a738-cce220feeee0)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp ddc2cc1f-4d2f-4110-a738-cce220feeee0)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 270 "/Control on separate board/I2C2_SCL") (pintype "passive") (tstamp ec7ad9a2-2535-4fd3-940c-034e69e6e643)) + (net 269 "/Control on separate board/I2C2_SCL") (pintype "passive") (tstamp ec7ad9a2-2535-4fd3-940c-034e69e6e643)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -6841,7 +7055,7 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp c976c7bb-434d-4365-a3d4-46b4a7205b84)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp fdf526c6-8011-4725-89e0-b2152e3b8145)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 290 "Net-(L19-Pad1)") (pintype "passive") (tstamp fc913a49-2a86-4d67-ae93-4487a3c88d18)) + (net 289 "Net-(L19-Pad1)") (pintype "passive") (tstamp fc913a49-2a86-4d67-ae93-4487a3c88d18)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 9137a13c-c8fd-4251-b014-54e5eab196f1)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -6940,7 +7154,7 @@ (footprint "Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 3c82206c-1d92-49a4-a10d-4a6d981822be) - (at 339.564 -29.644) + (at 134.205 226.261) (descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "TAJA106K016RNJ") @@ -6972,7 +7186,7 @@ (fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer "F.Fab") (width 0.1) (tstamp d08b4e50-9cec-4e6a-be61-1970d20e21bf)) (fp_line (start 1.6 1.25) (end -1.6 1.25) (layer "F.Fab") (width 0.1) (tstamp f4fce41c-7eb8-424c-a2a8-f1756a1281a5)) (pad "1" smd roundrect (at -1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) - (net 153 "Net-(C149-Pad1)") (pintype "passive") (tstamp d1a2c611-559c-4454-99fc-f5925bacaea4)) + (net 152 "Net-(C149-Pad1)") (pintype "passive") (tstamp d1a2c611-559c-4454-99fc-f5925bacaea4)) (pad "2" smd roundrect (at 1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) (net 2 "GND") (pintype "passive") (tstamp b3697da5-47d1-480f-b417-caa531caa0c5)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" @@ -6984,7 +7198,7 @@ (footprint "mpb:large_inductor" (layer "F.Cu") (tedit 5FC0D6CB) (tstamp 3c90a45e-4649-477b-8924-e1190a0faf2b) - (at 303.684 -39.279) + (at 98.325 216.626) (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/91c14368-28f3-48f6-97b7-61b3fe76f76b") @@ -7004,13 +7218,13 @@ (fp_arc (start -1.4 1) (mid -2.4 0) (end -1.4 -1) (layer "F.SilkS") (width 0.15) (tstamp 5152b3f9-4a2e-44d8-8267-aba4892567c4)) (fp_arc (start -1.4 -1) (mid -2.4 -2) (end -1.4 -3) (layer "F.SilkS") (width 0.15) (tstamp b6bf7d8d-4f17-45da-9c22-96d373326ca3)) (pad "1" smd rect locked (at 0 -4.5) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") - (net 156 "Net-(C155-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 4122f1d8-0b2b-4c00-bf45-8fffc5ce98ed)) + (net 155 "Net-(C155-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 4122f1d8-0b2b-4c00-bf45-8fffc5ce98ed)) (pad "1" smd rect locked (at 0 -6) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 156 "Net-(C155-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 79262007-7ccb-4266-820d-df0554afa3a8)) + (net 155 "Net-(C155-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 79262007-7ccb-4266-820d-df0554afa3a8)) (pad "2" smd rect locked (at 0 6) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 157 "Net-(C156-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 478b4e25-984a-47d9-86a3-e2034cdf6150)) + (net 156 "Net-(C156-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 478b4e25-984a-47d9-86a3-e2034cdf6150)) (pad "2" smd rect locked (at 0 4.5) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") - (net 157 "Net-(C156-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 64204cb4-37f0-404e-a0de-ba8ff3739ad5)) + (net 156 "Net-(C156-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 64204cb4-37f0-404e-a0de-ba8ff3739ad5)) ) (footprint "Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical" (layer "F.Cu") @@ -7052,7 +7266,7 @@ (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp 8eff90f4-ff05-47ea-aecb-66c7ed21df3c)) (fp_line (start -1.27 3.81) (end -1.27 -0.635) (layer "F.Fab") (width 0.1) (tstamp c651e129-4bb8-426a-ba96-d55aa6f7cb68)) (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 273 "Net-(J32-Pad1)") (pinfunction "Pin_1") (pintype "passive") (tstamp f1029ad0-cddb-4470-8cd6-d21e2388d7fc)) + (net 272 "Net-(J32-Pad1)") (pinfunction "Pin_1") (pintype "passive") (tstamp f1029ad0-cddb-4470-8cd6-d21e2388d7fc)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_2") (pintype "passive") (tstamp 980e2d1e-8532-4dd1-8b84-aa29278461a7)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl" @@ -7064,7 +7278,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 3df37944-2892-45dd-8ed9-09e7c45cea55) - (at 382.994 -59.524) + (at 177.635 196.381) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -7095,9 +7309,9 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 6367daf6-206b-4bb3-a708-ba457e9e3ea6)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp d870e3b4-2d75-4fbf-af46-40c2288c20e5)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 144 "Net-(C143-Pad1)") (pintype "passive") (tstamp c975f6f1-deb8-4542-abf9-cac1bcee6648)) + (net 143 "Net-(C143-Pad1)") (pintype "passive") (tstamp c975f6f1-deb8-4542-abf9-cac1bcee6648)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 143 "Net-(C140-Pad2)") (pintype "passive") (tstamp 1ff7d048-c385-49da-9319-489edfa4a469)) + (net 142 "Net-(C140-Pad2)") (pintype "passive") (tstamp 1ff7d048-c385-49da-9319-489edfa4a469)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -7105,33 +7319,48 @@ ) ) - (footprint "mpb:AirCoil-8mm" (layer "F.Cu") - (tedit 5E4EB890) (tstamp 3e001923-e2fb-4d15-9090-15aba28923d7) - (at 191.652 -42.932) - (property "MPN" "") - (property "Need_order" "0") + (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEF0) (tstamp 3e001923-e2fb-4d15-9090-15aba28923d7) + (at 203.708 -6.604 -90) + (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") + (tags "inductor handsolder") + (property "MPN" "LQW2UASR56") + (property "Need_order" "1") (property "Sheetfile" "frontend_70.kicad_sch") (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/58d668bc-3294-4b84-a334-3e6db82816ff") - (attr through_hole) - (fp_text reference "L22" (at 1.5 0 90) (layer "F.SilkS") + (attr smd) + (fp_text reference "L22" (at 0 -2.05 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) - (tstamp 3b2e7b60-4ee7-4a8c-bacc-23d5da1c0c2f) + (tstamp 76ed8d0c-c5f9-45e3-9dfa-c1be9bf71eef) ) - (fp_text value "110nH" (at -2.5 0 90) (layer "F.Fab") + (fp_text value "56nH" (at 0 2.05 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) - (tstamp 37de50a2-e7da-499e-bca1-a61a16aeee68) + (tstamp 5e6ccd88-6661-4eb4-a086-bac6c9069cf8) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.62 0.62) (thickness 0.09))) + (tstamp f0ca0159-b7aa-49d5-9fe3-957c81264f5f) + ) + (fp_line (start -0.261252 -1.11) (end 0.261252 -1.11) (layer "F.SilkS") (width 0.12) (tstamp 1110dad2-bd56-4090-9ca2-1b80f9af454e)) + (fp_line (start -0.261252 1.11) (end 0.261252 1.11) (layer "F.SilkS") (width 0.12) (tstamp f1e72748-2350-4623-8f3e-0af4e600bb6f)) + (fp_line (start -2.12 1.35) (end -2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 333cd62c-259e-45f4-8d2a-27f07e26301e)) + (fp_line (start -2.12 -1.35) (end 2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 93c58ee9-96e2-4d77-8b03-b357c36f49e5)) + (fp_line (start 2.12 -1.35) (end 2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp cd1768ac-1062-4ad9-8f17-3b4b3ef01527)) + (fp_line (start 2.12 1.35) (end -2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp e8d457da-49ec-4e57-a847-e813c66ae3e9)) + (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 3ea3ed84-9d37-47be-a95d-3c9e587a1ff7)) + (fp_line (start 1.25 -1) (end 1.25 1) (layer "F.Fab") (width 0.1) (tstamp 492cf8e9-31c9-4efc-8b91-1f2da9754ec5)) + (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 4ac02c01-92db-40a5-80a3-caee9e944dc7)) + (fp_line (start 1.25 1) (end -1.25 1) (layer "F.Fab") (width 0.1) (tstamp d24f6061-c4f2-4be6-b75b-791cbd898873)) + (pad "1" smd roundrect (at -1.1625 0 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 107 "Net-(C94-Pad2)") (pinfunction "1") (pintype "passive") (tstamp a95e5244-2e84-4c51-8d6d-1849885264e6)) + (pad "2" smd roundrect (at 1.1625 0 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 371 "Net-(L22-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 745679ea-d33e-4170-9620-3e9a22f75b19)) + (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) ) - (fp_line (start 3.5 6) (end 3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp 71f06fec-dd0d-4c76-a2cb-64fa0dfb1118)) - (fp_line (start -3.5 -6) (end -3.5 6) (layer "F.SilkS") (width 0.15) (tstamp 89dd2642-caa2-45bc-b934-0cdf6c5fe28c)) - (fp_line (start -3.5 6) (end 3.5 6) (layer "F.SilkS") (width 0.15) (tstamp e5265c1a-2cf9-4b54-b861-dabcf2897d75)) - (fp_line (start 3.5 -6) (end -3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp e5f6c542-5a02-4e66-9b15-5700b2c87192)) - (fp_arc (start 0 0) (mid -1.5 -1.5) (end 0 -3) (layer "F.SilkS") (width 0.15) (tstamp f28a5ca3-0b89-4926-a3e9-18683735a8ce)) - (fp_arc (start 0 3) (mid -1.5 1.5) (end 0 0) (layer "F.SilkS") (width 0.15) (tstamp fdb0a75a-17b3-41d2-9afc-e746403fbdc8)) - (pad "1" thru_hole circle (at 0 -4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 108 "Net-(C94-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 17c5afa6-86cc-4c10-8d77-a9b9b41812e0)) - (pad "2" thru_hole circle (at 0 4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp dff83b97-e560-4a72-a611-a7685458c802)) ) (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") @@ -7302,7 +7531,7 @@ (fp_line (start -0.325 -1.45) (end 0.65 -1.45) (layer "F.Fab") (width 0.1) (tstamp 8bf4ea91-55e5-469b-a417-6d4410d777dd)) (fp_line (start 0.65 -1.45) (end 0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp 9c158c16-53d5-4468-a992-51edfa59f803)) (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 303 "Net-(Q10-Pad2)") (pinfunction "B") (pintype "input") (tstamp fc51dcda-9924-41c4-99fd-55384cf14c8e)) + (net 302 "Net-(Q10-Pad2)") (pinfunction "B") (pintype "input") (tstamp fc51dcda-9924-41c4-99fd-55384cf14c8e)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 66 "Net-(C55-Pad2)") (pinfunction "E") (pintype "passive") (tstamp 4e196bdb-160b-4d34-ba36-81176a1afefd)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) @@ -7316,7 +7545,7 @@ (footprint "RF_Shielding:Laird_Technologies_BMI-S-209-F_29.36x18.50mm" (layer "F.Cu") (tedit 5B85E9E3) (tstamp 3f4261fb-6e9b-46a2-b96f-975a9ea2c91d) - (at 171.702 -52.082) + (at 248.666 -11.176) (descr "Laird Technologies BMI-S-209-F Shielding Cabinet Two Piece SMD 29.36x18.50mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf)") (tags "Shielding Cabinet") (property "MPN" "BMI-S-209-F") @@ -7410,7 +7639,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 4016ef4f-19d5-4c7d-aea8-112e797148bd) - (at 200.782 -27.242) + (at 254.254 -12.827 180) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A103KXJTBC") @@ -7441,10 +7670,10 @@ (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp bbfdeb26-645a-4ea5-a5d3-91e17e48d620)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp d9399602-97d2-4e94-ae95-cbfe58787cd9)) (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp f5c86a5e-d4a9-4f23-a9db-bf009cca62ed)) - (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 133 "Net-(C128-Pad1)") (pintype "passive") (tstamp e4b2689c-301e-43cd-a362-8b185ad14e93)) - (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 134 "Net-(C128-Pad2)") (pintype "passive") (tstamp 764a2955-90bc-4ce7-990a-61ee6cb7e34d)) + (pad "1" smd roundrect (at -1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 132 "Net-(C128-Pad1)") (pintype "passive") (tstamp e4b2689c-301e-43cd-a362-8b185ad14e93)) + (pad "2" smd roundrect (at 1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 133 "Net-(C128-Pad2)") (pintype "passive") (tstamp 764a2955-90bc-4ce7-990a-61ee6cb7e34d)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -7573,7 +7802,7 @@ (fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer "F.Fab") (width 0.1) (tstamp deeb2659-ed95-46cd-a823-b1a165d54005)) (fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer "F.Fab") (width 0.1) (tstamp faf248a2-d876-48cf-9202-eb4cad17dadc)) (pad "1" smd roundrect (at -1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 47e83447-e42a-4c5f-8212-d3d99823f053)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 47e83447-e42a-4c5f-8212-d3d99823f053)) (pad "2" smd roundrect (at 1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) (net 2 "GND") (pintype "passive") (tstamp ee0505d2-6d5f-4d9c-a3e0-744bf320797e)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" @@ -7585,7 +7814,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 408bc476-e652-48bd-80c3-ff7b01bda798) - (at 126.47 -73.56) + (at -6.54 26.546) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM188R71H104KA93D") @@ -7660,9 +7889,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp abdcd133-8bcf-410f-a6ca-d83bdfe9d3d9)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e2c92a69-6cc8-4fd0-b077-40f0decc44a8)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 338 "Net-(R160-Pad1)") (pintype "passive") (tstamp 5c26471d-1cc4-4883-9f1e-39a1db10de0e)) + (net 337 "Net-(R160-Pad1)") (pintype "passive") (tstamp 5c26471d-1cc4-4883-9f1e-39a1db10de0e)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 162 "/Control on separate board/ENC_B") (pintype "passive") (tstamp c0c69d5a-fc44-436f-9fbd-12f8242121dc)) + (net 161 "/Control on separate board/ENC_B") (pintype "passive") (tstamp c0c69d5a-fc44-436f-9fbd-12f8242121dc)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -7670,6 +7899,53 @@ ) ) + (footprint "mpb:AirCoil-8mm-or-2-series-1008" (layer "F.Cu") + (tedit 5E4EB890) (tstamp 41fbb1c8-7eb5-43ef-8516-b9b478218cd6) + (at 270.891 -10.795 90) + (property "Description" "NEOSID 00 5261 00 originally, 115nH minimum") + (property "Need_order" "0") + (property "Sheetfile" "frontend_70.kicad_sch") + (property "Sheetname" "70MHz VHF Frontend") + (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/7fb0f97a-b463-46e4-bf11-460f021ab0ba") + (attr through_hole) + (fp_text reference "L38" (at 2.5 0) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 979e5018-a823-4a73-906e-d334c8536380) + ) + (fp_text value "100nH min" (at -2.5 0) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp a7073642-2cc4-4dda-a478-edea091161e0) + ) + (fp_line (start 3.5 6) (end 3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp 1c78381d-5adf-476a-8978-fa7512844ca9)) + (fp_line (start -3.5 -6) (end -3.5 6) (layer "F.SilkS") (width 0.15) (tstamp c4b2f2a6-fb62-4a5d-82a4-86abf999d5f6)) + (fp_line (start 3.5 -6) (end -3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp d624dc93-e60c-4bbf-9123-3c8cfc4f9a0d)) + (fp_line (start -3.5 6) (end 3.5 6) (layer "F.SilkS") (width 0.15) (tstamp f0579851-8b86-4e19-8033-1fefed83b047)) + (fp_arc (start -1.1 0) (mid -2.6 -1.5) (end -1.1 -3) (layer "F.SilkS") (width 0.15) (tstamp c4f2dd2c-e20f-4f6e-b870-e21f5153b694)) + (fp_arc (start -1.1 3) (mid -2.6 1.5) (end -1.1 0) (layer "F.SilkS") (width 0.15) (tstamp ec7cdf53-0989-4dc1-bf93-544e37932027)) + (fp_line (start -3.3 5.8) (end -3.3 -5.8) (layer "F.CrtYd") (width 0.05) (tstamp 1c0541cc-0e0d-4306-9246-658a182bb6a3)) + (fp_line (start 3.3 5.8) (end -3.3 5.8) (layer "F.CrtYd") (width 0.05) (tstamp 225ef8ee-7fa3-407a-a1de-6df910fc3b62)) + (fp_line (start 3.3 5.8) (end 3.3 -5.8) (layer "F.CrtYd") (width 0.05) (tstamp 7ddd9e48-4f09-465c-914f-d6cb830f7b85)) + (fp_line (start -3.3 -5.8) (end 3.3 -5.8) (layer "F.CrtYd") (width 0.05) (tstamp ae43da51-3f69-4820-a442-c52d445db6e4)) + (fp_line (start -0.95 -2.87) (end 1.05 -2.87) (layer "F.Fab") (width 0.1) (tstamp 1b56e39f-a6eb-4b73-bf43-253435cd9ed3)) + (fp_line (start 1.05 -2.87) (end 1.05 -0.37) (layer "F.Fab") (width 0.1) (tstamp 69d89b20-265b-4f1b-a5af-079d64efc485)) + (fp_line (start -0.95 -0.37) (end -0.95 -2.87) (layer "F.Fab") (width 0.1) (tstamp 773b6afe-e873-40f6-8858-2a4aa2e34adf)) + (fp_line (start 1.05 -0.37) (end -0.95 -0.37) (layer "F.Fab") (width 0.1) (tstamp 7b8b0157-e018-41fc-8ce6-f8ec4172839b)) + (fp_line (start -0.95 2.73) (end -0.95 0.23) (layer "F.Fab") (width 0.1) (tstamp 80b79d68-6247-4c28-bbe8-a4523abad5ea)) + (fp_line (start 1.05 2.73) (end -0.95 2.73) (layer "F.Fab") (width 0.1) (tstamp bbe50fcc-30f8-4b6f-be51-ccac641f262e)) + (fp_line (start -0.95 0.23) (end 1.05 0.23) (layer "F.Fab") (width 0.1) (tstamp ef0e9a92-a5fa-45d8-8f05-cfc2bab5c842)) + (fp_line (start 1.05 0.23) (end 1.05 2.73) (layer "F.Fab") (width 0.1) (tstamp fa85a482-62d7-4cb1-81e7-271cd11ffe7c)) + (pad "" smd roundrect (at 0.05 -0.4575) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp 4efe5577-a3fc-4d4a-b3d4-2ef828db68ce)) + (pad "" smd roundrect (at 0.05 0.3175) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp 7db39a21-47f3-4037-ac1e-ed78cf8b663a)) + (pad "1" thru_hole circle (at 0 -4 90) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) + (net 132 "Net-(C128-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 900aba50-7f3b-4919-b45a-3293fba0b871)) + (pad "1" smd roundrect (at 0.05 -2.7825) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 132 "Net-(C128-Pad1)") (pinfunction "1") (pintype "passive") (tstamp d63b109d-7bf6-4fad-8465-ebaa151f5229)) + (pad "2" smd roundrect (at 0.05 2.6425) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 136 "/70MHz VHF Frontend/VHF_TX") (pinfunction "2") (pintype "passive") (tstamp 0603dbec-c052-4358-8925-99a2979d42ee)) + (pad "2" thru_hole circle (at 0 4 90) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) + (net 136 "/70MHz VHF Frontend/VHF_TX") (pinfunction "2") (pintype "passive") (tstamp 117cc7b9-98ab-46ac-aac4-a479dc0852eb)) + ) + (footprint "Package_TO_SOT_SMD:SOT-23" (layer "F.Cu") (tedit 5FA16958) (tstamp 42a72de0-359d-4117-baca-f5830fd1db76) (at 68.834 75.692) @@ -7709,9 +7985,9 @@ (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 72 "Net-(C61-Pad1)") (pinfunction "B") (pintype "input") (tstamp fa17c8fe-62f5-43f4-ab6c-5e3024b88483)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 307 "Net-(Q14-Pad2)") (pinfunction "E") (pintype "passive") (tstamp f5d77ec3-450f-4ea6-8583-7c9c3f8798bc)) + (net 306 "Net-(Q14-Pad2)") (pinfunction "E") (pintype "passive") (tstamp f5d77ec3-450f-4ea6-8583-7c9c3f8798bc)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 308 "Net-(Q14-Pad3)") (pinfunction "C") (pintype "passive") (tstamp 0b5c854d-e947-4ca4-b9e0-ff997c7af866)) + (net 307 "Net-(Q14-Pad3)") (pinfunction "C") (pintype "passive") (tstamp 0b5c854d-e947-4ca4-b9e0-ff997c7af866)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -7721,7 +7997,7 @@ (footprint "Crystal:Crystal_HC49-U_Vertical" (layer "F.Cu") (tedit 5A1AD3B8) (tstamp 4311cce9-fe05-40d6-a8e7-ea9b1a184c2e) - (at 213.065 76.51) + (at 51.663 167.95) (descr "Crystal THT HC-49/U http://5hertz.com/pdfs/04404_D.pdf") (tags "THT crystalHC-49/U") (property "MPN" "ECS-110.5-32-1X") @@ -7771,7 +8047,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 4322298b-10b2-40f0-ae6f-1d1111d6966a) - (at 208.972 -23.972) + (at 201.422 -6.096 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -7780,15 +8056,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/9683d057-6e0e-44ba-8cc1-a487985fd09a") (attr smd) - (fp_text reference "C95" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "C95" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp fd4583ca-28c9-4132-90a7-659d99fb7ec2) ) - (fp_text value "27pF" (at 0 1.43) (layer "F.Fab") + (fp_text value "27pF" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 1a8fdb3a-df7f-4851-aca8-28ac3a738e62) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 0d247c3f-19ed-4574-977a-3b2c7f82d422) ) @@ -7802,10 +8078,10 @@ (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 3daa13da-370a-479a-a1b4-c85d9d21f37d)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 436fa75d-813f-456c-82b3-25b20aafb0bc)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 437c7260-74a0-4401-826a-81f3cb195859)) - (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 2ceba7fa-50c2-4ca1-8729-d24cf457f4ef)) - (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 108 "Net-(C94-Pad2)") (pintype "passive") (tstamp c5503976-28c2-4a7d-bd82-e70a39c576a8)) + (pad "2" smd roundrect (at 0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 107 "Net-(C94-Pad2)") (pintype "passive") (tstamp c5503976-28c2-4a7d-bd82-e70a39c576a8)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -7815,7 +8091,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 4333ba03-04d4-4c72-bc59-28dc1d264e60) - (at 241.642 -61.252) + (at 171.704 -33.782) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -7846,9 +8122,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp cd370092-6a94-4fa0-ace3-07ff3b4f46ed)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp fc7370ee-ee7c-4ff1-988e-14182d71ad87)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 332 "Net-(R111-Pad2)") (pintype "passive") (tstamp 8d83d520-d6b4-48cb-a165-3ecf15034d7d)) + (net 331 "Net-(R111-Pad2)") (pintype "passive") (tstamp 8d83d520-d6b4-48cb-a165-3ecf15034d7d)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 114 "Net-(C104-Pad2)") (pintype "passive") (tstamp d5a38dbf-66b1-47b8-9c4d-2102e57c1eed)) + (net 113 "Net-(C104-Pad2)") (pintype "passive") (tstamp d5a38dbf-66b1-47b8-9c4d-2102e57c1eed)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -7858,7 +8134,7 @@ (footprint "Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 43bfaf0f-e11d-479d-a06e-3936bded3138) - (at 99 -50.84) + (at -34.01 49.266) (descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "stash tantalum") @@ -7980,7 +8256,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 74 "Net-(C63-Pad2)") (pintype "passive") (tstamp ab52757b-0f90-433b-90d7-cf2c933d5770)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 308 "Net-(Q14-Pad3)") (pintype "passive") (tstamp ff76232f-6d56-43d9-a4b6-7374ba0ba07f)) + (net 307 "Net-(Q14-Pad3)") (pintype "passive") (tstamp ff76232f-6d56-43d9-a4b6-7374ba0ba07f)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -8022,7 +8298,7 @@ (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 867d40c9-f798-47e9-a085-a991a70f5df1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 897e0b4d-b2cb-4e6f-8b23-f355dcc4dac0)) (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 167 "Net-(C172-Pad1)") (pintype "passive") (tstamp 2f025d1b-4644-476a-a901-72bad6a94bf5)) + (net 166 "Net-(C172-Pad1)") (pintype "passive") (tstamp 2f025d1b-4644-476a-a901-72bad6a94bf5)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 21e1d785-d327-4047-95bf-ae55899fe87e)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" @@ -8032,35 +8308,6 @@ ) ) - (footprint "mpb:AirCoil-8mm" (layer "F.Cu") - (tedit 5E4EB890) (tstamp 4704ecea-3f16-4642-b642-58de58946c27) - (at 213.372 -55.932) - (property "MPN" "") - (property "Need_order" "0") - (property "Sheetfile" "frontend_70.kicad_sch") - (property "Sheetname" "70MHz VHF Frontend") - (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/f2d2b8d3-28da-429e-8b59-ebe3b77d1db9") - (attr through_hole) - (fp_text reference "L29" (at 1.5 0 90) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp fe2c1e06-92a5-42b1-a941-010faa7e9f19) - ) - (fp_text value "110nH" (at -2.5 0 90) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp ef1d492e-bdb5-403a-8f1c-a149f8aebf72) - ) - (fp_line (start -3.5 -6) (end -3.5 6) (layer "F.SilkS") (width 0.15) (tstamp 32d22118-2cee-4c40-9ffc-4425e59f3481)) - (fp_line (start -3.5 6) (end 3.5 6) (layer "F.SilkS") (width 0.15) (tstamp 69e67833-27eb-41a8-9b6e-f9f60de9ed74)) - (fp_line (start 3.5 6) (end 3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp 897d2769-3630-4413-b58d-65da930553e0)) - (fp_line (start 3.5 -6) (end -3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp e0c78a62-f450-4a33-b60c-a54211523391)) - (fp_arc (start 0 0) (mid -1.5 -1.5) (end 0 -3) (layer "F.SilkS") (width 0.15) (tstamp 0e98aca2-3798-42cd-aab3-f82435d4a7e6)) - (fp_arc (start 0 3) (mid -1.5 1.5) (end 0 0) (layer "F.SilkS") (width 0.15) (tstamp ffbcb368-2725-4e90-94a6-a0125acc0670)) - (pad "1" thru_hole circle (at 0 -4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 111 "Net-(C101-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 22d2edea-7924-49c7-a195-64a2e8ec53b7)) - (pad "2" thru_hole circle (at 0 4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp dab85400-54f7-4b2e-904c-5646912a1c55)) - ) - (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 470a6b56-a609-4ef3-a4f3-0386f5ec1785) (at -67.4 235.25) @@ -8094,9 +8341,9 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp b2166ae6-1565-4d73-ad0c-a1370504a499)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp efe54433-2580-48c3-91d6-fb717af26585)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp bcf15b6b-8667-4798-974b-afe15862510b)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp bcf15b6b-8667-4798-974b-afe15862510b)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 239 "/Control on separate board/SCL") (pintype "passive") (tstamp f9a6972d-c936-42fb-aba2-cad40287eb0a)) + (net 238 "/Control on separate board/SCL") (pintype "passive") (tstamp f9a6972d-c936-42fb-aba2-cad40287eb0a)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -8106,7 +8353,7 @@ (footprint "mpb:large_inductor" (layer "F.Cu") (tedit 5FC0D6CB) (tstamp 47d303e3-0266-45cc-8f18-1c7692aa8fb1) - (at 309.154 -39.279) + (at 103.795 216.626) (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/313ae445-5f38-4224-861e-dfe728f8c561") @@ -8126,18 +8373,18 @@ (fp_arc (start -1.4 3) (mid -2.4 2) (end -1.4 1) (layer "F.SilkS") (width 0.15) (tstamp 8d8ce9d0-c7f4-4dda-95a8-6a9d44c7c4b5)) (fp_arc (start -1.4 1) (mid -2.4 0) (end -1.4 -1) (layer "F.SilkS") (width 0.15) (tstamp b9dd8a44-1c78-423f-9968-bf8f9886a340)) (pad "1" smd rect locked (at 0 -6) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 158 "Net-(C159-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 5a13305a-df2a-4bf5-b0fb-7f096a40ca4e)) + (net 157 "Net-(C159-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 5a13305a-df2a-4bf5-b0fb-7f096a40ca4e)) (pad "1" smd rect locked (at 0 -4.5) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") - (net 158 "Net-(C159-Pad2)") (pinfunction "1") (pintype "passive") (tstamp f0478c67-1dc0-4c0a-8cb8-00438d094dda)) + (net 157 "Net-(C159-Pad2)") (pinfunction "1") (pintype "passive") (tstamp f0478c67-1dc0-4c0a-8cb8-00438d094dda)) (pad "2" smd rect locked (at 0 4.5) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") - (net 160 "Net-(C162-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 306256b6-5e42-495e-9be3-b5bd6ab33927)) + (net 159 "Net-(C162-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 306256b6-5e42-495e-9be3-b5bd6ab33927)) (pad "2" smd rect locked (at 0 6) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 160 "Net-(C162-Pad2)") (pinfunction "2") (pintype "passive") (tstamp b6ef19ab-93cb-4a1e-9209-bb43fb7f0ce4)) + (net 159 "Net-(C162-Pad2)") (pinfunction "2") (pintype "passive") (tstamp b6ef19ab-93cb-4a1e-9209-bb43fb7f0ce4)) ) (footprint "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" (layer "F.Cu") (tedit 5D9F72B1) (tstamp 47e80f5e-4f9b-48d0-a434-d5f6b52e62db) - (at 192.502 -32.982) + (at 82.266 -22.568) (descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "SOIC SO") (property "MPN" "IRF7309TRPBF") @@ -8174,19 +8421,19 @@ (pad "1" smd roundrect (at -2.475 -1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "S") (pintype "passive") (tstamp 0c197fcb-a2b1-4b16-b891-99848652ff54)) (pad "2" smd roundrect (at -2.475 -0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 258 "/70MHz VHF Frontend/EN_VTX") (pinfunction "G") (pintype "input") (tstamp 9259f778-13c9-4b44-a064-d30c58ff1e69)) + (net 257 "/70MHz VHF Frontend/EN_VTX") (pinfunction "G") (pintype "input") (tstamp 9259f778-13c9-4b44-a064-d30c58ff1e69)) (pad "3" smd roundrect (at -2.475 0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 315 "/70MHz VHF Frontend/+9V_FE") (pinfunction "1") (pintype "passive") (tstamp ae102077-ff0e-4904-b50d-ae3d5c438e4a)) + (net 314 "/70MHz VHF Frontend/+9V_FE") (pinfunction "1") (pintype "passive") (tstamp ae102077-ff0e-4904-b50d-ae3d5c438e4a)) (pad "4" smd roundrect (at -2.475 1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 318 "Net-(Q27-Pad4)") (pinfunction "G") (pintype "input") (tstamp b49cc1ab-698f-4272-b303-7d983658ffc1)) + (net 317 "Net-(Q27-Pad4)") (pinfunction "G") (pintype "input") (tstamp b49cc1ab-698f-4272-b303-7d983658ffc1)) (pad "5" smd roundrect (at 2.475 1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 119 "/70MHz VHF Frontend/+VTX_FE") (pinfunction "D") (pintype "passive") (tstamp 2d7d5576-16ed-433d-9539-e75304011b25)) + (net 118 "/70MHz VHF Frontend/+VTX_FE") (pinfunction "D") (pintype "passive") (tstamp 2d7d5576-16ed-433d-9539-e75304011b25)) (pad "6" smd roundrect (at 2.475 0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 119 "/70MHz VHF Frontend/+VTX_FE") (pinfunction "D") (pintype "passive") (tstamp 72dc2f01-de15-4b03-88c6-1b5422e64c6c)) + (net 118 "/70MHz VHF Frontend/+VTX_FE") (pinfunction "D") (pintype "passive") (tstamp 72dc2f01-de15-4b03-88c6-1b5422e64c6c)) (pad "7" smd roundrect (at 2.475 -0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 318 "Net-(Q27-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 2e132732-3db0-484f-8354-776557ea2e92)) + (net 317 "Net-(Q27-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 2e132732-3db0-484f-8354-776557ea2e92)) (pad "8" smd roundrect (at 2.475 -1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 318 "Net-(Q27-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 00b8b917-5de8-4863-a06d-3e2c152707a1)) + (net 317 "Net-(Q27-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 00b8b917-5de8-4863-a06d-3e2c152707a1)) (model "${KICAD6_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -8196,7 +8443,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 482f5c09-bf83-4136-bb12-ef85a6c69d6f) - (at 354.364 -35.114) + (at 149.005 220.791) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -8227,9 +8474,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 55bf8fce-27a9-43a9-b4ef-6c3a4746ce56)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp c810ae2d-71d0-49ba-a9bc-ccd2d6092d79)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 336 "Net-(R157-Pad1)") (pintype "passive") (tstamp 028bfe04-8f80-4e34-805c-fea7fe7de0f8)) + (net 335 "Net-(R157-Pad1)") (pintype "passive") (tstamp 028bfe04-8f80-4e34-805c-fea7fe7de0f8)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 141 "VGG1") (pintype "passive") (tstamp e282ee04-c20a-48f2-8e6d-5d3dcb3b08f3)) + (net 140 "VGG1") (pintype "passive") (tstamp e282ee04-c20a-48f2-8e6d-5d3dcb3b08f3)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -8239,7 +8486,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp 493afed3-8e55-4fb8-990d-f4e265ffbe92) - (at 349.934 -50.054) + (at 144.575 205.851) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -8299,7 +8546,7 @@ (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp e50b72a1-b50f-4efc-b4f9-253a0d574ae0)) (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp f866bbe7-7ca2-47fb-bf93-070f777d1e91)) (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 170 "Net-(C176-Pad1)") (pintype "passive") (tstamp 31264269-0d0e-4ec2-aa50-d1b07c5ccb7b)) + (net 169 "Net-(C176-Pad1)") (pintype "passive") (tstamp 31264269-0d0e-4ec2-aa50-d1b07c5ccb7b)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 259e9792-7f4e-4108-bc7c-2615dce7ddca)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" @@ -8311,7 +8558,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 4c067bb5-d02f-4d3d-b5b6-db8c0297cca9) - (at 330.164 -20.664) + (at 124.805 235.241) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "885612007040/VJ0805A102GXXPW1BC") @@ -8343,9 +8590,9 @@ (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp ea17d0a7-1dff-4024-bdd7-d52faff8defc)) (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp f52ea4da-b445-4824-b8af-fe86d9210b30)) (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 161 "/PA 70MHz/PA_OUT") (pintype "passive") (tstamp 1862c4c3-ea4e-4ef2-8897-0df4a7117804)) + (net 160 "/PA 70MHz/PA_OUT") (pintype "passive") (tstamp 1862c4c3-ea4e-4ef2-8897-0df4a7117804)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 160 "Net-(C162-Pad2)") (pintype "passive") (tstamp fc6ec218-5191-4a4e-a30f-eea3013596e2)) + (net 159 "Net-(C162-Pad2)") (pintype "passive") (tstamp fc6ec218-5191-4a4e-a30f-eea3013596e2)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -8355,7 +8602,7 @@ (footprint "Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 4c435530-ca6a-494b-8e0b-02e023d4dc8f) - (at 332.414 -24.294) + (at 127.055 231.611) (descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "TAJA106K016RNJ") @@ -8387,7 +8634,7 @@ (fp_line (start 1.6 1.25) (end -1.6 1.25) (layer "F.Fab") (width 0.1) (tstamp f14da857-d47b-4c42-bfe5-79ed5a111db2)) (fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer "F.Fab") (width 0.1) (tstamp ffd1dd54-43cb-463f-b754-9d55c3a8d2b3)) (pad "1" smd roundrect (at -1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) - (net 140 "/PA 70MHz/12V") (pintype "passive") (tstamp bd7400d3-0cb0-43e9-ae32-d22bea9b3088)) + (net 139 "/PA 70MHz/12V") (pintype "passive") (tstamp bd7400d3-0cb0-43e9-ae32-d22bea9b3088)) (pad "2" smd roundrect (at 1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) (net 2 "GND") (pintype "passive") (tstamp 8adba027-b14f-43d0-b3e0-867811caa232)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" @@ -8399,7 +8646,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp 4c43610f-e7b7-4be4-b59d-de0377400709) - (at 67.25 -21.28) + (at 137.414 80.01) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -8427,7 +8674,7 @@ (footprint "Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical" (layer "F.Cu") (tedit 59FED5CC) (tstamp 4c61f573-369b-4d30-815b-d568a99595a3) - (at 34.05 -72.49) + (at 137.414 55.895) (descr "Through hole straight pin header, 1x08, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x08 2.54mm single row") (property "MPN" "SSW-108-01-G-S") @@ -8472,13 +8719,13 @@ (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_4") (pintype "passive") (tstamp 90d2d374-ad53-4508-be93-32b56cd90f9b)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 367 "Net-(J16-Pad5)") (pinfunction "Pin_5") (pintype "passive") (tstamp 35025075-c8a6-497b-98d1-2460b67499e3)) + (net 366 "Net-(J16-Pad5)") (pinfunction "Pin_5") (pintype "passive") (tstamp 35025075-c8a6-497b-98d1-2460b67499e3)) (pad "6" thru_hole oval (at 0 12.7) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_6") (pintype "passive") (tstamp 7d1a1fb6-5e2a-42d3-9b8b-7cb5bc5ca1c8)) (pad "7" thru_hole oval (at 0 15.24) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_7") (pintype "passive") (tstamp 4385ed9b-580a-4930-8004-bc40b0e0e16a)) (pad "8" thru_hole oval (at 0 17.78) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 245 "/EN_VTX") (pinfunction "Pin_8") (pintype "passive") (tstamp cab32441-3320-45a5-a98f-52b655d0afc9)) + (net 244 "/EN_VTX") (pinfunction "Pin_8") (pintype "passive") (tstamp cab32441-3320-45a5-a98f-52b655d0afc9)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x08_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -8521,7 +8768,7 @@ (fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer "F.Fab") (width 0.1) (tstamp dc5f3f99-f11a-4e62-8860-483a6db57aa8)) (fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer "F.Fab") (width 0.1) (tstamp e1fd8941-5b3a-4c1a-bc60-32c29475976d)) (pad "1" smd roundrect (at -1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp bd44d296-32e7-44d9-ac08-1fa6dece8ab9)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp bd44d296-32e7-44d9-ac08-1fa6dece8ab9)) (pad "2" smd roundrect (at 1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) (net 2 "GND") (pintype "passive") (tstamp cc499291-3714-403b-b8e7-d41c2fc00e4d)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" @@ -8566,7 +8813,7 @@ (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 78 "Net-(C66-Pad2)") (pintype "passive") (tstamp c0c73670-e5af-4668-b47e-450d73c18c2d)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 186 "Net-(D15-Pad2)") (pintype "passive") (tstamp f88ac9cf-918c-4ca1-80ee-e58908c44828)) + (net 185 "Net-(D15-Pad2)") (pintype "passive") (tstamp f88ac9cf-918c-4ca1-80ee-e58908c44828)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -8663,7 +8910,7 @@ (pad "2" smd rect (at 0 1.45) (size 2 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (net 30 "Net-(C25-Pad1)") (pinfunction "2") (pintype "passive") (tstamp 67a513f7-f3bd-425b-a022-d18ce3bcfd24)) (pad "3" smd rect (at -1.25 -1.45) (size 1.3 1.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 248 "/Baseband/CW_TONE") (pinfunction "3") (pintype "passive") (tstamp 68079c4a-3689-4f6c-9fe0-e5bce74e05ea)) + (net 247 "/Baseband/CW_TONE") (pinfunction "3") (pintype "passive") (tstamp 68079c4a-3689-4f6c-9fe0-e5bce74e05ea)) (model "${KICAD6_3DMODEL_DIR}/Potentiometer_SMD.3dshapes/Potentiometer_Bourns_3214W_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -8673,7 +8920,7 @@ (footprint "mpb:C_Trimmer_Voltronics_JZ" (layer "F.Cu") (tedit 590DA842) (tstamp 4fd4e793-4deb-483c-b374-f8340f0225db) - (at 169.602 -12.582) + (at 167.64 -27.432 -90) (descr "trimmer capacitor SMD horizontal") (tags "Voltronics Knowles JZ series") (property "MPN" "JZ-300") @@ -8682,15 +8929,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/72e32228-962c-4ad5-b415-2a6c406b02ba") (attr smd) - (fp_text reference "C106" (at 0 -3.25) (layer "F.SilkS") + (fp_text reference "C106" (at 0 -3.25 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 49f756e7-587c-49a7-b8be-2c87697829db) ) - (fp_text value "5-25pF" (at 0 3.25) (layer "F.Fab") + (fp_text value "5-25pF" (at 0 3.25 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp f695e297-c84d-4c1a-a2e5-3b3f837bb2e2) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.05))) (tstamp 9648ebc9-f5d7-4a33-9817-c29932b4a539) ) @@ -8723,9 +8970,9 @@ (fp_line (start 2.25 2) (end 2.24 2) (layer "F.Fab") (width 0.1) (tstamp b8da2549-9e30-4e7a-b6cb-a774a979a06c)) (fp_line (start -1.8 2) (end -2.25 1.7) (layer "F.Fab") (width 0.1) (tstamp e3a74d7a-834b-41a4-9871-00bc8464ac6b)) (fp_circle (center 0 0) (end 2 0) (layer "F.Fab") (width 0.1) (fill none) (tstamp b3ce4e34-5fb7-4ab4-8e62-f9adc1744123)) - (pad "1" smd rect (at -2.4 0) (size 1.8 1.4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 115 "Net-(C106-Pad1)") (pintype "passive") (tstamp ee6e8df6-d7f5-44e5-915e-9657b5b736a5)) - (pad "2" smd rect (at 2.3 0) (size 1.8 1.4) (layers "F.Cu" "F.Paste" "F.Mask") + (pad "1" smd rect (at -2.4 0 270) (size 1.8 1.4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 114 "Net-(C106-Pad1)") (pintype "passive") (tstamp ee6e8df6-d7f5-44e5-915e-9657b5b736a5)) + (pad "2" smd rect (at 2.3 0 270) (size 1.8 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pintype "passive") (tstamp 82f7c581-e6a1-4cbe-a665-ba931c1326f0)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_Trimmer_Murata_TZB4-A.wrl" (offset (xyz 0 0 0)) @@ -8736,7 +8983,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 509ce4ad-a911-4cd7-9a26-2bc80297c4a2) - (at 204.622 -23.972) + (at 94.386 -13.558) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -8768,9 +9015,9 @@ (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 850e2b64-f694-41a7-b193-9510f4ff2616)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp dd9b7d62-2b4d-4e7d-8515-ad4841709fbe)) (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 122 "Net-(C112-Pad2)") (pintype "passive") (tstamp 8f9f5dad-85f5-456e-b2f5-926010f886d0)) + (net 121 "Net-(C112-Pad2)") (pintype "passive") (tstamp 8f9f5dad-85f5-456e-b2f5-926010f886d0)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 124 "Net-(C115-Pad2)") (pintype "passive") (tstamp 5456ff74-1204-48af-b1fe-e5468a67b657)) + (net 123 "Net-(C115-Pad2)") (pintype "passive") (tstamp 5456ff74-1204-48af-b1fe-e5468a67b657)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -8824,7 +9071,7 @@ (footprint "Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 50cd21a6-d9e6-4011-bae9-f2d131b0684a) - (at 89.19 -42.64) + (at -43.82 57.466) (descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "TAJA106K016RNJ") @@ -8948,11 +9195,11 @@ (fp_line (start -0.325 -1.45) (end 0.65 -1.45) (layer "F.Fab") (width 0.1) (tstamp 8141f5a9-20e3-4a93-b1f6-2b76f80fb931)) (fp_line (start 0.65 1.45) (end -0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp 8f3b2d57-95c5-4cfb-85a9-c2d680d391c7)) (pad "1" smd roundrect (at -0.9375 -0.95 90) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 296 "Net-(Q1-Pad1)") (pinfunction "B") (pintype "input") (tstamp 88e0df6e-8250-429a-9cd6-07bf1443a3d8)) + (net 295 "Net-(Q1-Pad1)") (pinfunction "B") (pintype "input") (tstamp 88e0df6e-8250-429a-9cd6-07bf1443a3d8)) (pad "2" smd roundrect (at -0.9375 0.95 90) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "E") (pintype "passive") (tstamp 76f98619-d503-43b1-9543-cbe8ef4bf8db)) (pad "3" smd roundrect (at 0.9375 0 90) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 246 "/MIC_PTTn") (pinfunction "C") (pintype "passive") (tstamp c1b12f1e-25c0-4d2d-96ac-0ed91df12a9f)) + (net 245 "/MIC_PTTn") (pinfunction "C") (pintype "passive") (tstamp c1b12f1e-25c0-4d2d-96ac-0ed91df12a9f)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -8993,9 +9240,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp b173eb87-20cc-4644-a3b3-0aaf4649b0ce)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e7b3d22e-33f5-4957-8617-b0e31a033bf9)) (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 330 "Net-(R100-Pad1)") (pintype "passive") (tstamp 549df579-9404-45cb-b53b-a8be823cf1eb)) + (net 329 "Net-(R100-Pad1)") (pintype "passive") (tstamp 549df579-9404-45cb-b53b-a8be823cf1eb)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 287 "/LO1") (pintype "passive") (tstamp 61ce03f2-d655-4e4d-b4ec-862b7234c7e6)) + (net 286 "/LO1") (pintype "passive") (tstamp 61ce03f2-d655-4e4d-b4ec-862b7234c7e6)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9005,7 +9252,7 @@ (footprint "Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 5360027f-840b-4bfb-b57f-f6a95ddfd440) - (at 195.762 -21.522) + (at 145.796 -26.416 90) (descr "Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2BASR33G00L") @@ -9014,15 +9261,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/425ec37a-9429-4b46-9f20-1dec0174d247") (attr smd) - (fp_text reference "L25" (at 0 -1.65) (layer "F.SilkS") + (fp_text reference "L25" (at 0 -1.65 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 3ce0278c-ef86-4db2-ac98-b27ebd16e47f) ) - (fp_text value "330nH" (at 0 1.65) (layer "F.Fab") + (fp_text value "330nH" (at 0 1.65 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp d2ba787d-ac95-42c0-af01-fa3c715e0480) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.08))) (tstamp ffae285f-9270-4a20-bc89-3cf6e72a026b) ) @@ -9036,10 +9283,10 @@ (fp_line (start -1 -0.6) (end 1 -0.6) (layer "F.Fab") (width 0.1) (tstamp 4da579d1-0773-42d2-a3c8-948ee8b56cfe)) (fp_line (start 1 0.6) (end -1 0.6) (layer "F.Fab") (width 0.1) (tstamp 88c62a66-47c9-4b87-b735-db8c96dea85f)) (fp_line (start 1 -0.6) (end 1 0.6) (layer "F.Fab") (width 0.1) (tstamp ff026d7a-4d35-464e-a192-bf8b09bfccd0)) - (pad "1" smd roundrect (at -1.025 0) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 292 "Net-(L23-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 428c9343-cc9a-4637-97e7-449b89c5f3bf)) - (pad "2" smd roundrect (at 1.025 0) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 293 "Net-(L25-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 7d519f6c-57f3-4c43-8263-59226c0ca617)) + (pad "1" smd roundrect (at -1.025 0 90) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) + (net 291 "Net-(L23-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 428c9343-cc9a-4637-97e7-449b89c5f3bf)) + (pad "2" smd roundrect (at 1.025 0 90) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) + (net 292 "Net-(L25-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 7d519f6c-57f3-4c43-8263-59226c0ca617)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9091,67 +9338,56 @@ ) ) - (footprint "mpb:AirCoil-8mm" (layer "F.Cu") + (footprint "mpb:AirCoil-8mm-or-2-series-1008" (layer "F.Cu") (tedit 5E4EB890) (tstamp 54a7d42d-050a-4157-b5bd-0dec32085fdf) - (at 176.052 -35.082) - (property "MPN" "") - (property "Need_order" "0") + (at 65.816 -24.668) + (property "MPN" "2x LQW2UASR56") + (property "Need_order" "1") (property "Sheetfile" "frontend_70.kicad_sch") (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/a43d8312-f60e-490a-8179-2ac59b540099") (attr through_hole) - (fp_text reference "L34" (at 1.5 0 90) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 1f25e982-b771-49aa-a8da-52195335808a) - ) - (fp_text value "110nH" (at -2.5 0 90) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 75f6c051-96e0-401a-b232-b2737652f74c) - ) - (fp_line (start -3.5 -6) (end -3.5 6) (layer "F.SilkS") (width 0.15) (tstamp 07b68019-90f7-4d04-a74b-a61fa942be10)) - (fp_line (start 3.5 6) (end 3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp a428d434-2044-43b6-be12-b71902102ac7)) - (fp_line (start -3.5 6) (end 3.5 6) (layer "F.SilkS") (width 0.15) (tstamp dd06fe6e-5cbb-4579-b4bb-736e49ac2914)) - (fp_line (start 3.5 -6) (end -3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp de3a89f7-0a1e-4618-9e52-a5dac3aa6a7a)) - (fp_arc (start 0 0) (mid -1.5 -1.5) (end 0 -3) (layer "F.SilkS") (width 0.15) (tstamp 1a7e6e1e-26b9-488f-b322-2adf53a536f3)) - (fp_arc (start 0 3) (mid -1.5 1.5) (end 0 0) (layer "F.SilkS") (width 0.15) (tstamp 5033e98f-4798-4f53-a794-77c7ff005543)) - (pad "1" thru_hole circle (at 0 -4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 124 "Net-(C115-Pad2)") (pinfunction "1") (pintype "passive") (tstamp ca9c3c0b-e2ed-485b-81be-1eafd6be6d0b)) - (pad "2" thru_hole circle (at 0 4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp f753dd41-2273-44f2-91b7-5d38ea7ef458)) - ) - - (footprint "mpb:AirCoil-8mm" (layer "F.Cu") - (tedit 5E4EB890) (tstamp 555597ae-43a3-40bd-8f1a-2c4184cb3204) - (at 199.802 -42.782) - (property "MPN" "") - (property "Need_order" "0") - (property "Sheetfile" "frontend_70.kicad_sch") - (property "Sheetname" "70MHz VHF Frontend") - (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/8d086012-493c-48e8-819b-75c174f76f3e") - (attr through_hole) - (fp_text reference "L27" (at 1.5 0 90) (layer "F.SilkS") + (fp_text reference "L34" (at 2.5 0 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) - (tstamp 3402f807-50dc-40fe-a7ba-466de43b69aa) + (tstamp a425e24a-c940-49c2-a22a-08272e325105) ) (fp_text value "110nH" (at -2.5 0 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) - (tstamp 1d6d73d0-db81-479d-bad8-b4b46ad26d3b) - ) - (fp_line (start 3.5 6) (end 3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp 0d07bf3e-6505-4370-a463-b9740035792c)) - (fp_line (start -3.5 6) (end 3.5 6) (layer "F.SilkS") (width 0.15) (tstamp 23322998-cccf-4121-b953-704b14e4a9bd)) - (fp_line (start -3.5 -6) (end -3.5 6) (layer "F.SilkS") (width 0.15) (tstamp 75c8d5e3-bcc8-4932-a0d3-0452c0566876)) - (fp_line (start 3.5 -6) (end -3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp d87272f4-3766-4ebb-98be-8273395182df)) - (fp_arc (start 0 0) (mid -1.5 -1.5) (end 0 -3) (layer "F.SilkS") (width 0.15) (tstamp a237c8a4-bfe9-4a70-940a-b45bc5cd3778)) - (fp_arc (start 0 3) (mid -1.5 1.5) (end 0 0) (layer "F.SilkS") (width 0.15) (tstamp dec9202a-a30c-4608-ada9-9a570dc207c8)) + (tstamp 65828667-8875-4ffb-ab3b-1a23da49d5ad) + ) + (fp_line (start 3.5 6) (end 3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp 06ff78d0-bc01-4764-8037-02e4bb3f2c27)) + (fp_line (start -3.5 -6) (end -3.5 6) (layer "F.SilkS") (width 0.15) (tstamp 58f4b13d-b639-4ced-addd-4b449648a874)) + (fp_line (start -3.5 6) (end 3.5 6) (layer "F.SilkS") (width 0.15) (tstamp d2a22ad1-b30d-4673-a86e-a1b8eae7724a)) + (fp_line (start 3.5 -6) (end -3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp dc339456-8154-469a-a0c6-4101cad57289)) + (fp_arc (start -1.1 3) (mid -2.6 1.5) (end -1.1 0) (layer "F.SilkS") (width 0.15) (tstamp 6f09dc96-2e30-4b8d-9497-0cf8ea6264f7)) + (fp_arc (start -1.1 0) (mid -2.6 -1.5) (end -1.1 -3) (layer "F.SilkS") (width 0.15) (tstamp fa9ae297-f82b-4d6d-b526-fffcd79394b5)) + (fp_line (start -3.3 -5.8) (end 3.3 -5.8) (layer "F.CrtYd") (width 0.05) (tstamp 0d1af840-9bd7-4c7c-80a7-0c6b3cbb9dd2)) + (fp_line (start 3.3 5.8) (end -3.3 5.8) (layer "F.CrtYd") (width 0.05) (tstamp 2d3b3905-cead-4d0e-b009-1a8d93eaa787)) + (fp_line (start 3.3 5.8) (end 3.3 -5.8) (layer "F.CrtYd") (width 0.05) (tstamp 3b4983ab-67cc-465b-b7b7-bba82db7f349)) + (fp_line (start -3.3 5.8) (end -3.3 -5.8) (layer "F.CrtYd") (width 0.05) (tstamp 3c8c5199-8258-457d-91a5-9b8a22b0b33b)) + (fp_line (start -0.95 -2.87) (end 1.05 -2.87) (layer "F.Fab") (width 0.1) (tstamp 02cfaf38-f41e-48fc-81cd-fac36eaea3cd)) + (fp_line (start 1.05 0.23) (end 1.05 2.73) (layer "F.Fab") (width 0.1) (tstamp 03268122-5830-497a-bbc7-bae21cf2efa0)) + (fp_line (start -0.95 -0.37) (end -0.95 -2.87) (layer "F.Fab") (width 0.1) (tstamp 0851c257-fc50-40f5-83a0-c3cda35cdf26)) + (fp_line (start -0.95 2.73) (end -0.95 0.23) (layer "F.Fab") (width 0.1) (tstamp 2b90a40e-fc1b-4296-b5ef-e61f4327d035)) + (fp_line (start -0.95 0.23) (end 1.05 0.23) (layer "F.Fab") (width 0.1) (tstamp 8f60a4ec-aebc-4e69-83da-bf4a7fec30ee)) + (fp_line (start 1.05 -2.87) (end 1.05 -0.37) (layer "F.Fab") (width 0.1) (tstamp ddec442e-790d-40d1-8876-cd441ddc0678)) + (fp_line (start 1.05 -0.37) (end -0.95 -0.37) (layer "F.Fab") (width 0.1) (tstamp f8a8ef9e-a962-4742-9e09-5b821dce8afb)) + (fp_line (start 1.05 2.73) (end -0.95 2.73) (layer "F.Fab") (width 0.1) (tstamp fadb664b-1673-41ed-9f53-1ddc23cc3546)) + (pad "" smd roundrect (at 0.05 -0.4575 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp 6b201641-5d5e-4d73-b0eb-0d4fdfdd27c7)) + (pad "" smd roundrect (at 0.05 0.3175 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp 81e2c189-082b-427d-ae7c-50469531006c)) (pad "1" thru_hole circle (at 0 -4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 109 "Net-(C96-Pad2)") (pinfunction "1") (pintype "passive") (tstamp beaf3ca9-2d15-45f0-9c0f-6031a69fc9ec)) + (net 123 "Net-(C115-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 02ea4fdb-d4d2-4a58-be66-24dd8104b683)) + (pad "1" smd roundrect (at 0.05 -2.7825 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 123 "Net-(C115-Pad2)") (pinfunction "1") (pintype "passive") (tstamp b9979b11-97ba-4f40-81a6-6e5ff0ad2501)) (pad "2" thru_hole circle (at 0 4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 89177f3b-fe06-4a6e-82b4-62652769d92d)) + (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp ab2cb1d4-cd62-45c1-ae5c-8c97649debfc)) + (pad "2" smd roundrect (at 0.05 2.6425 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp bd7c24c3-69f3-497f-9a9a-b0c1d05c4bb6)) ) (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 557463df-3cdb-4573-89ba-e6c8360528a6) - (at 218.952 -37.062) + (at 223.266 -7.112 180) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -9182,10 +9418,10 @@ (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 63adf892-e475-4a5b-a128-57940c767398)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 70e4abe8-b211-4c25-ad55-a8737d76ae9b)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 9177479b-e2a1-469a-9e9a-fbf62314d0a8)) - (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 113 "Net-(C103-Pad1)") (pintype "passive") (tstamp 23e344bb-d882-4ee5-ad17-5e60beab9fe9)) - (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 111 "Net-(C101-Pad2)") (pintype "passive") (tstamp b8a9a9ea-5de4-4b11-9214-3ac45125c194)) + (pad "1" smd roundrect (at -0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 112 "Net-(C103-Pad1)") (pintype "passive") (tstamp 23e344bb-d882-4ee5-ad17-5e60beab9fe9)) + (pad "2" smd roundrect (at 0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 110 "Net-(C101-Pad2)") (pintype "passive") (tstamp b8a9a9ea-5de4-4b11-9214-3ac45125c194)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9195,7 +9431,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp 55833a0c-6ab5-4364-ad5c-c879a760011f) - (at 332.984 -29.994) + (at 127.625 225.911) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -9258,11 +9494,11 @@ (fp_line (start 0.675 -1.1) (end -0.175 -1.1) (layer "F.Fab") (width 0.1) (tstamp 6019e6ce-edef-4e51-8196-44b8be29284e)) (fp_line (start 0.675 1.1) (end -0.675 1.1) (layer "F.Fab") (width 0.1) (tstamp f23c569b-9303-43ff-a4dc-74f9810b8b88)) (pad "1" smd rect (at -1.33 -0.65) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 191 "Net-(D18-Pad1)") (pintype "passive") (tstamp be194f90-ee16-4ee8-9b4b-eca65baa4169)) + (net 190 "Net-(D18-Pad1)") (pintype "passive") (tstamp be194f90-ee16-4ee8-9b4b-eca65baa4169)) (pad "2" smd rect (at -1.33 0.65) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 192 "Net-(D18-Pad2)") (pintype "passive") (tstamp ef50033f-71b7-42ae-a745-134f97a3c5e0)) + (net 191 "Net-(D18-Pad2)") (pintype "passive") (tstamp ef50033f-71b7-42ae-a745-134f97a3c5e0)) (pad "3" smd rect (at 1.33 0) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 193 "Net-(D18-Pad3)") (pintype "passive") (tstamp a0fad240-51d7-4ff4-8a11-ab5bee64adfb)) + (net 192 "Net-(D18-Pad3)") (pintype "passive") (tstamp a0fad240-51d7-4ff4-8a11-ab5bee64adfb)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-323_SC-70.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9320,9 +9556,9 @@ (pad "1" thru_hole circle (at 0 0 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "1") (pintype "passive") (tstamp ef14fda2-79ed-49d9-8846-19c7b251f579)) (pad "2" thru_hole circle (at 6.5 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) - (net 342 "/Control on separate board/BTN2") (pinfunction "2") (pintype "passive") (tstamp 0e43b435-50c6-4aaa-a7ec-5ebff5648366)) + (net 341 "/Control on separate board/BTN2") (pinfunction "2") (pintype "passive") (tstamp 0e43b435-50c6-4aaa-a7ec-5ebff5648366)) (pad "2" thru_hole circle (at 0 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) - (net 342 "/Control on separate board/BTN2") (pinfunction "2") (pintype "passive") (tstamp be96ddac-740b-465b-bf05-80ad1e826077)) + (net 341 "/Control on separate board/BTN2") (pinfunction "2") (pintype "passive") (tstamp be96ddac-740b-465b-bf05-80ad1e826077)) (model "${KICAD6_3DMODEL_DIR}/Button_Switch_THT.3dshapes/SW_PUSH_6mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9367,10 +9603,10 @@ (fp_line (start -0.7 -0.95) (end -0.15 -1.52) (layer "F.Fab") (width 0.1) (tstamp 81ad28ac-7f36-4df9-9a1b-ee426a2ea4ea)) (fp_line (start -0.15 -1.52) (end 0.7 -1.52) (layer "F.Fab") (width 0.1) (tstamp 9f4e4630-c9b5-4a5a-94aa-4a096223d458)) (pad "1" smd rect (at -1.5 -0.95 180) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 181 "Net-(D10-Pad1)") (pinfunction "A") (pintype "passive") (tstamp f1cb56de-20e1-4b90-80dd-100f8cc1d888)) + (net 180 "Net-(D10-Pad1)") (pinfunction "A") (pintype "passive") (tstamp f1cb56de-20e1-4b90-80dd-100f8cc1d888)) (pad "2" smd rect (at -1.5 0.95 180) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp 87a09e45-3b63-440d-bc01-fbeeaba81b05)) (pad "3" smd rect (at 1.5 0 180) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 180 "Net-(D10-Pad3)") (pinfunction "K") (pintype "passive") (tstamp 68ecbf1d-a738-4982-892f-eac4664da606)) + (net 179 "Net-(D10-Pad3)") (pinfunction "K") (pintype "passive") (tstamp 68ecbf1d-a738-4982-892f-eac4664da606)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9468,7 +9704,7 @@ (footprint "mpb:large_inductor" (layer "F.Cu") (tedit 5FC0D6CB) (tstamp 5770c51f-2af9-4ff1-b2bc-614ea9042d45) - (at 323.214 -52.279) + (at 117.855 203.626) (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/b210c741-e1e0-447a-806b-1fb1e78ea989") @@ -9488,18 +9724,18 @@ (fp_arc (start -1.4 3) (mid -2.4 2) (end -1.4 1) (layer "F.SilkS") (width 0.15) (tstamp 12b8f9f9-c622-4b0b-a325-b55d129b5c5c)) (fp_arc (start -1.4 -1) (mid -2.4 -2) (end -1.4 -3) (layer "F.SilkS") (width 0.15) (tstamp 8528fbfd-f191-4599-8273-1449cc6bb615)) (pad "1" smd rect locked (at 0 -6) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 157 "Net-(C156-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 3be62ba2-c754-4300-a7fc-35565a8cf46d)) + (net 156 "Net-(C156-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 3be62ba2-c754-4300-a7fc-35565a8cf46d)) (pad "1" smd rect locked (at 0 -4.5) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") - (net 157 "Net-(C156-Pad2)") (pinfunction "1") (pintype "passive") (tstamp af99248e-b93d-4b12-92ef-789b0a7e05f9)) + (net 156 "Net-(C156-Pad2)") (pinfunction "1") (pintype "passive") (tstamp af99248e-b93d-4b12-92ef-789b0a7e05f9)) (pad "2" smd rect locked (at 0 6) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 158 "Net-(C159-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 83b47682-2766-4d89-a1f6-1536cfdb97c6)) + (net 157 "Net-(C159-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 83b47682-2766-4d89-a1f6-1536cfdb97c6)) (pad "2" smd rect locked (at 0 4.5) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") - (net 158 "Net-(C159-Pad2)") (pinfunction "2") (pintype "passive") (tstamp f250b125-faf4-4b39-be3a-254d78440f45)) + (net 157 "Net-(C159-Pad2)") (pinfunction "2") (pintype "passive") (tstamp f250b125-faf4-4b39-be3a-254d78440f45)) ) (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 57a2d0cb-50ec-4cdf-85de-8e292d478d54) - (at 351.204 -27.334) + (at 145.845 228.571) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM188R71H104KA93D") @@ -9533,7 +9769,7 @@ (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp ff11e3d6-96ad-4510-8998-015f733ce406)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 148 "VGG2") (pintype "passive") (tstamp ff9bd320-bf68-499c-8f04-476234f29d30)) + (net 147 "VGG2") (pintype "passive") (tstamp ff9bd320-bf68-499c-8f04-476234f29d30)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9582,7 +9818,7 @@ (pad "2" smd roundrect (at -0.9375 0.95 270) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 94 "Net-(C80-Pad2)") (pinfunction "E") (pintype "passive") (tstamp a4874db7-8c80-49ff-bf75-1cec32ab2a58)) (pad "3" smd roundrect (at 0.9375 0 270) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 312 "Net-(Q21-Pad1)") (pinfunction "C") (pintype "passive") (tstamp 8c4e9ab3-1fcf-469c-a8fa-aefe37c402f9)) + (net 311 "Net-(Q21-Pad1)") (pinfunction "C") (pintype "passive") (tstamp 8c4e9ab3-1fcf-469c-a8fa-aefe37c402f9)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9634,7 +9870,7 @@ (pad "1" smd rect (at -1.4 0 270) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") (net 54 "Net-(C47-Pad2)") (pinfunction "K") (pintype "passive") (tstamp 6b5d11d5-6d1b-45c7-886d-8bf06819a8bf)) (pad "2" smd rect (at 1.4 0 270) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") - (net 177 "Net-(D7-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 4775bc68-1c18-4b26-ada5-8c0224f1d92c)) + (net 176 "Net-(D7-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 4775bc68-1c18-4b26-ada5-8c0224f1d92c)) (model "${KICAD6_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-123F.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9672,7 +9908,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 5985bb3c-5f3e-4efc-b72c-ad04675e58b9) - (at 228.002 -57.992) + (at 135.636 -26.162 90) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "08051A471GAT2A") @@ -9681,15 +9917,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/7c6ce322-8a15-4b33-b227-ed97e5e1fc64") (attr smd) - (fp_text reference "C92" (at 0 -1.68) (layer "F.SilkS") + (fp_text reference "C92" (at 0 -1.68 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp af16ad36-b2f4-4302-a882-308c4a43c47d) ) - (fp_text value "470pF" (at 0 1.68) (layer "F.Fab") + (fp_text value "470pF" (at 0 1.68 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 616f9bbe-059d-48c6-bb34-e1a1dd720225) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.08))) (tstamp de4ea844-8fc7-4309-9fcd-48476a795371) ) @@ -9703,10 +9939,10 @@ (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp 2ba13894-1606-4b1b-8055-63dcf92f23af)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 51f1fe03-d957-4749-b9a8-08ff3ccf7e02)) (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 9044f9c4-b9dc-436f-a8a4-d68ca8992e28)) - (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 104 "Net-(C100-Pad1)") (pintype "passive") (tstamp 7bb43058-d78b-4bc9-a6af-42007c2002c6)) - (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 105 "/70MHz VHF Frontend/VHF_RX") (pintype "passive") (tstamp 21b122da-7e42-40e2-ba69-33959c86ccb4)) + (pad "1" smd roundrect (at -1.0375 0 90) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 2 "GND") (pintype "passive") (tstamp 7bb43058-d78b-4bc9-a6af-42007c2002c6)) + (pad "2" smd roundrect (at 1.0375 0 90) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 104 "/70MHz VHF Frontend/VHF_RX") (pintype "passive") (tstamp 21b122da-7e42-40e2-ba69-33959c86ccb4)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9716,7 +9952,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 5a814ddd-7d40-4602-8e15-828ef4e9457f) - (at 349.194 -29.844) + (at 143.835 226.061) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -9750,7 +9986,7 @@ (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp b9337dc0-3e14-4f8a-be06-21484d0d8d58)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 158 "Net-(C159-Pad2)") (pintype "passive") (tstamp 0e6da4a9-5e56-4d87-8f6b-3ca5d191a977)) + (net 157 "Net-(C159-Pad2)") (pintype "passive") (tstamp 0e6da4a9-5e56-4d87-8f6b-3ca5d191a977)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9760,7 +9996,7 @@ (footprint "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" (layer "F.Cu") (tedit 5D9F72B1) (tstamp 5a9e3471-a881-4371-b83f-7bf622af6d20) - (at 57.11 -28.91) + (at -75.9 71.196) (descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "SOIC SO") (property "MPN" "IRF7309TRPBF") @@ -9797,19 +10033,19 @@ (pad "1" smd roundrect (at -2.475 -1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "S") (pintype "passive") (tstamp 95e1d673-1118-4f7e-8c94-d2d56d9cd1e6)) (pad "2" smd roundrect (at -2.475 -0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 245 "/EN_VTX") (pinfunction "G") (pintype "input") (tstamp 98537263-5a38-4708-bc42-76759ee23977)) + (net 244 "/EN_VTX") (pinfunction "G") (pintype "input") (tstamp 98537263-5a38-4708-bc42-76759ee23977)) (pad "3" smd roundrect (at -2.475 0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 6 "+9VA") (pinfunction "1") (pintype "passive") (tstamp 4d9428d3-9598-4f9e-bbd9-766c229df1bc)) (pad "4" smd roundrect (at -2.475 1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 298 "Net-(Q3-Pad4)") (pinfunction "G") (pintype "input") (tstamp c49948e8-2bbc-402d-b2b9-21be3239c175)) + (net 297 "Net-(Q3-Pad4)") (pinfunction "G") (pintype "input") (tstamp c49948e8-2bbc-402d-b2b9-21be3239c175)) (pad "5" smd roundrect (at 2.475 1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 263 "+VTX") (pinfunction "D") (pintype "passive") (tstamp da809c4b-7f41-4c60-9915-c6479f384b7a)) + (net 262 "+VTX") (pinfunction "D") (pintype "passive") (tstamp da809c4b-7f41-4c60-9915-c6479f384b7a)) (pad "6" smd roundrect (at 2.475 0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 263 "+VTX") (pinfunction "D") (pintype "passive") (tstamp 2dbb2448-4902-43b8-9bf2-87f43c43c4c2)) + (net 262 "+VTX") (pinfunction "D") (pintype "passive") (tstamp 2dbb2448-4902-43b8-9bf2-87f43c43c4c2)) (pad "7" smd roundrect (at 2.475 -0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 298 "Net-(Q3-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 7028fe00-33bb-4150-b409-27f83f321678)) + (net 297 "Net-(Q3-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 7028fe00-33bb-4150-b409-27f83f321678)) (pad "8" smd roundrect (at 2.475 -1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 298 "Net-(Q3-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 5ec297c1-46e7-4415-90ea-804d56f27bb1)) + (net 297 "Net-(Q3-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 5ec297c1-46e7-4415-90ea-804d56f27bb1)) (model "${KICAD6_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9817,6 +10053,50 @@ ) ) + (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEF0) (tstamp 5ab36b13-8090-4f0d-9fa4-9e5c1e537e88) + (at 210.82 -2.794 180) + (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") + (tags "inductor handsolder") + (property "MPN" "LQW2UASR56") + (property "Need_order" "1") + (property "Sheetfile" "frontend_70.kicad_sch") + (property "Sheetname" "70MHz VHF Frontend") + (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/abbd48ba-057f-404d-9c58-720aaab537d4") + (attr smd) + (fp_text reference "L45" (at 0 -2.05) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 160b4ab4-2c34-4805-a999-0272be3713b7) + ) + (fp_text value "56nH" (at 0 2.05) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp b5cb3a6a-a712-482d-a931-a5f16ec7d0b8) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.62 0.62) (thickness 0.09))) + (tstamp a11da305-b822-4fea-900a-36aad5ffb748) + ) + (fp_line (start -0.261252 -1.11) (end 0.261252 -1.11) (layer "F.SilkS") (width 0.12) (tstamp e1ff5b95-8ff0-4ddc-8795-878105b033d6)) + (fp_line (start -0.261252 1.11) (end 0.261252 1.11) (layer "F.SilkS") (width 0.12) (tstamp eda872c4-abf7-480d-b772-fdf94f0801fd)) + (fp_line (start -2.12 -1.35) (end 2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 174bfe82-bdb3-4736-8a57-0617bf094f2a)) + (fp_line (start 2.12 1.35) (end -2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp 320436f3-c1a7-458d-8762-5faecb882a15)) + (fp_line (start -2.12 1.35) (end -2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 863438e1-5f64-443f-94cb-0c8bc3a904a6)) + (fp_line (start 2.12 -1.35) (end 2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp d062f116-64e2-40a9-a831-1c6f373bf9e6)) + (fp_line (start 1.25 -1) (end 1.25 1) (layer "F.Fab") (width 0.1) (tstamp 5e351dd9-2f12-4d25-8aed-8cc5aa28dca8)) + (fp_line (start 1.25 1) (end -1.25 1) (layer "F.Fab") (width 0.1) (tstamp 83c0d629-cf58-4f92-ad49-b1022938386d)) + (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 84dddd99-4e40-45be-8207-69de139f1360)) + (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp ab6ee156-e296-4610-b70d-c981564b6165)) + (pad "1" smd roundrect (at -1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 372 "Net-(L27-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 937a8e3a-5c05-46b7-8fd2-cd04e86ddb99)) + (pad "2" smd roundrect (at 1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp dfcbe8f2-e896-48d4-af29-6df76aaaa49b)) + (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 5aeaa73a-bd56-4c00-ac8d-40425ce15495) (at 28.448 79.756 90) @@ -9864,7 +10144,7 @@ (footprint "Crystal:Crystal_HC49-U_Vertical" (layer "F.Cu") (tedit 5A1AD3B8) (tstamp 5af75449-a7a0-430d-be95-dc5c85d820d0) - (at 213.065 82.86) + (at 51.663 174.3) (descr "Crystal THT HC-49/U http://5hertz.com/pdfs/04404_D.pdf") (tags "THT crystalHC-49/U") (property "MPN" "ECS-110.5-32-1X") @@ -9946,7 +10226,7 @@ (fp_line (start 1 -0.6) (end 1 0.6) (layer "F.Fab") (width 0.1) (tstamp b8f79940-5cd4-4031-af96-c5f43bf05b9f)) (fp_line (start -1 0.6) (end -1 -0.6) (layer "F.Fab") (width 0.1) (tstamp f4ca1d01-e5fe-4209-a66b-b9e9436fe9e5)) (pad "1" smd roundrect (at -1.025 0 90) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 290 "Net-(L19-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 01b3348c-68d3-4ce0-bf9c-13837fd225df)) + (net 289 "Net-(L19-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 01b3348c-68d3-4ce0-bf9c-13837fd225df)) (pad "2" smd roundrect (at 1.025 0 90) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) (net 100 "Net-(C86-Pad1)") (pinfunction "2") (pintype "passive") (tstamp 4ba01f7c-828f-4125-8a01-5d84e0d3e5ac)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0805_2012Metric.wrl" @@ -9958,7 +10238,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 5c233bc5-05b2-4619-ae3f-c58fa9a60207) - (at 214.432 -44.842) + (at 176.022 -32.512) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A103KXJTBC") @@ -9992,7 +10272,7 @@ (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 54d73615-1bde-45ee-8cad-bb7bb39aaba7)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 118 "Net-(C109-Pad2)") (pintype "passive") (tstamp e9325c36-6ba6-47d2-a192-09ae6c7dc121)) + (net 117 "Net-(C109-Pad2)") (pintype "passive") (tstamp e9325c36-6ba6-47d2-a192-09ae6c7dc121)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -10033,9 +10313,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 5a5f35a1-a433-45d8-a3ac-038972f5eccc)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 9f2db427-0939-4a12-9474-e4d107072d61)) (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 263 "+VTX") (pintype "passive") (tstamp 7f49e584-c79f-4ef8-83a4-6cc0554215af)) + (net 262 "+VTX") (pintype "passive") (tstamp 7f49e584-c79f-4ef8-83a4-6cc0554215af)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 179 "Net-(D9-Pad1)") (pintype "passive") (tstamp 95ce773f-73b8-49e0-b2e5-99ffb348929f)) + (net 178 "Net-(D9-Pad1)") (pintype "passive") (tstamp 95ce773f-73b8-49e0-b2e5-99ffb348929f)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -10045,7 +10325,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 5cbd8e21-cdff-4030-b492-5d3e3d04853a) - (at 185.932 -15.252) + (at 267.081 -6.223) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "Need_order" "0") @@ -10076,7 +10356,7 @@ (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp c5f7ca61-73fb-4314-a7d6-aa97be855824)) (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp f4ac0b6a-2ded-4a03-a2e5-ccc39b04aa92)) (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 133 "Net-(C128-Pad1)") (pintype "passive") (tstamp 180f6248-d1c6-469e-8525-72576196b5b2)) + (net 132 "Net-(C128-Pad1)") (pintype "passive") (tstamp 180f6248-d1c6-469e-8525-72576196b5b2)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp c8f8aaad-3e20-40a2-8460-bb372c3dc63f)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" @@ -10088,7 +10368,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 5de89c31-9b50-4d26-a9b4-f898d52a6fe9) - (at 343.904 -19.304) + (at 138.545 236.601) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -10119,9 +10399,9 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 6f8e18f5-58ed-45b8-8f5b-1d146e4480e6)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 71eedf5f-a652-4e8d-9a3b-f32fe5829eac)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 144 "Net-(C143-Pad1)") (pintype "passive") (tstamp d5d6ad13-0d01-42ee-92d2-a7c06712057f)) + (net 143 "Net-(C143-Pad1)") (pintype "passive") (tstamp d5d6ad13-0d01-42ee-92d2-a7c06712057f)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 143 "Net-(C140-Pad2)") (pintype "passive") (tstamp 5d75f011-87ab-4d1e-9e90-8a7a73109dea)) + (net 142 "Net-(C140-Pad2)") (pintype "passive") (tstamp 5d75f011-87ab-4d1e-9e90-8a7a73109dea)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -10131,7 +10411,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 5e10fcbc-b556-40dd-b16e-ef58ff51cf9b) - (at 158.002 -11.002) + (at 47.766 -0.588) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -10162,7 +10442,7 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 57795708-0496-4497-a264-03dad69bf994)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp ef183071-4b12-4687-83c2-dd6af763620a)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 127 "Net-(C119-Pad1)") (pintype "passive") (tstamp e7eb7110-da97-4bd5-af56-9272979b3f39)) + (net 126 "Net-(C119-Pad1)") (pintype "passive") (tstamp e7eb7110-da97-4bd5-af56-9272979b3f39)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 4f7250df-72de-4fa0-a268-1a04cbf80cd7)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -10207,7 +10487,7 @@ (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 47 "Net-(C43-Pad2)") (pintype "passive") (tstamp 0aef2650-c4b7-4fe1-9c7a-11c54be58be0)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 248 "/Baseband/CW_TONE") (pintype "passive") (tstamp 51f89818-0cdd-4dcf-a91d-cd97c9ec23e7)) + (net 247 "/Baseband/CW_TONE") (pintype "passive") (tstamp 51f89818-0cdd-4dcf-a91d-cd97c9ec23e7)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -10248,7 +10528,7 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp e5daf9f1-7f03-4959-8b25-23ef7ee2de25)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp f4c9bc01-1241-40fb-a021-cefa4d88b718)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 325 "Net-(R35-Pad1)") (pintype "passive") (tstamp e047c1ee-def7-41a1-8fea-87e019f42c65)) + (net 324 "Net-(R35-Pad1)") (pintype "passive") (tstamp e047c1ee-def7-41a1-8fea-87e019f42c65)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 16 "/BFO") (pintype "passive") (tstamp 6ba42b77-918e-4c98-880c-287918f9e107)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -10293,7 +10573,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 36 "+VRX") (pintype "passive") (tstamp dbc94d3f-8a12-44da-9e18-0868c1561fe8)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 181 "Net-(D10-Pad1)") (pintype "passive") (tstamp cea35d37-fb62-4fa4-bf97-910bb78ce3b8)) + (net 180 "Net-(D10-Pad1)") (pintype "passive") (tstamp cea35d37-fb62-4fa4-bf97-910bb78ce3b8)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -10303,7 +10583,7 @@ (footprint "Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical" (layer "F.Cu") (tedit 59FED5CC) (tstamp 5f9b3e38-2af8-48b0-ac76-0a53e994af54) - (at 153.035 62.865) + (at 157.615 62.809) (descr "Through hole straight pin header, 1x06, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x06 2.54mm single row") (property "Sheetfile" "kicad-dart-70.kicad_sch") @@ -10340,15 +10620,15 @@ (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_1") (pintype "passive") (tstamp e38dbcfe-0e93-4028-93ef-f1ac56f8174e)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 105 "/70MHz VHF Frontend/VHF_RX") (pinfunction "Pin_2") (pintype "passive") (tstamp 7efc8edb-99eb-4210-b4f8-7fe973b14764)) + (net 104 "/70MHz VHF Frontend/VHF_RX") (pinfunction "Pin_2") (pintype "passive") (tstamp 7efc8edb-99eb-4210-b4f8-7fe973b14764)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_3") (pintype "passive") (tstamp ff639eab-0030-409e-b42a-971f791a63f0)) (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 137 "/70MHz VHF Frontend/VHF_TX") (pinfunction "Pin_4") (pintype "passive") (tstamp ee871d06-3ff4-4889-ba1d-80cbc0831df8)) + (net 136 "/70MHz VHF Frontend/VHF_TX") (pinfunction "Pin_4") (pintype "passive") (tstamp ee871d06-3ff4-4889-ba1d-80cbc0831df8)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_5") (pintype "passive") (tstamp f981d034-2a31-42fd-9ebb-63da2f9c3963)) (pad "6" thru_hole oval (at 0 12.7) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 369 "unconnected-(J38-Pad6)") (pinfunction "Pin_6") (pintype "passive") (tstamp c58396ef-6f87-41ce-b6f5-dbf4e5d9a069)) + (net 368 "unconnected-(J38-Pad6)") (pinfunction "Pin_6") (pintype "passive") (tstamp c58396ef-6f87-41ce-b6f5-dbf4e5d9a069)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x06_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -10401,7 +10681,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 610f07d5-12ae-4510-9b1d-6ff61650b24e) - (at 228.172 -45.152) + (at 215.138 -7.112 180) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -10432,10 +10712,10 @@ (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 886ea79a-af39-4f6c-97a8-4bd13a4fb348)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp e87a760f-4f23-4da2-b50d-a2803525d616)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp f03312f8-e499-486e-9e6d-913f6931e8ad)) - (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 111 "Net-(C101-Pad2)") (pintype "passive") (tstamp ecccb65a-a736-4340-aa16-c0a624e089af)) - (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 109 "Net-(C96-Pad2)") (pintype "passive") (tstamp a6ff7615-dd30-40dc-82e5-6f2849fe661e)) + (pad "1" smd roundrect (at -0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 110 "Net-(C101-Pad2)") (pintype "passive") (tstamp ecccb65a-a736-4340-aa16-c0a624e089af)) + (pad "2" smd roundrect (at 0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 108 "Net-(C96-Pad2)") (pintype "passive") (tstamp a6ff7615-dd30-40dc-82e5-6f2849fe661e)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -10489,7 +10769,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 61c69259-b512-498b-a9fd-54d535cf7f28) - (at 181.122 -13.852) + (at 171.704 -32.004) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A103KXJTBC") @@ -10523,7 +10803,7 @@ (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 681efa01-75ce-4ee3-badb-d2f9d47d234f)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 114 "Net-(C104-Pad2)") (pintype "passive") (tstamp 922a79df-1a00-4a56-8814-bdb5920d9041)) + (net 113 "Net-(C104-Pad2)") (pintype "passive") (tstamp 922a79df-1a00-4a56-8814-bdb5920d9041)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -10533,7 +10813,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 62dc5755-aeeb-4d11-b941-b451ebac674c) - (at 114.51 -66.41) + (at -18.5 33.696) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -10566,7 +10846,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 6 "+9VA") (pintype "passive") (tstamp 0b51f641-855a-4c04-b080-0980cabf9dc3)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 298 "Net-(Q3-Pad4)") (pintype "passive") (tstamp 5f4821e4-8491-49e7-8939-e5b9e56f91b5)) + (net 297 "Net-(Q3-Pad4)") (pintype "passive") (tstamp 5f4821e4-8491-49e7-8939-e5b9e56f91b5)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -10610,7 +10890,7 @@ (pad "1" smd roundrect (at -1.4875 0 270) (size 1.425 2.65) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 61 "Net-(C52-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 13824b47-be77-45b3-91e0-5e1efecddc4a)) (pad "2" smd roundrect (at 1.4875 0 270) (size 1.425 2.65) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 178 "Net-(D8-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 919fd896-e4dd-4aae-a000-0bdb219b2ffe)) + (net 177 "Net-(D8-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 919fd896-e4dd-4aae-a000-0bdb219b2ffe)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1210_3225Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -10620,7 +10900,7 @@ (footprint "TestPoint:TestPoint_Pad_D1.5mm" (layer "F.Cu") (tedit 5A0F774F) (tstamp 638b609a-2af9-428e-85b2-6e66e64d8fa5) - (at 79.3 -57.34) + (at -53.71 42.766) (descr "SMD pad as test Point, diameter 1.5mm") (tags "test point SMD pad") (property "Need_order" "0") @@ -10692,7 +10972,7 @@ (footprint "Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 63bd4e76-f600-4c6f-8487-06920a7461a7) - (at 205.562 -31.722) + (at 242.443 -13.081 90) (descr "Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "Description" "NEOSID 00 5231 03 originally, 135nH minimum") @@ -10702,15 +10982,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/ea3a4ce1-39b3-4c0c-89a9-2ce13c24ba4d") (attr smd) - (fp_text reference "L33" (at 0 -1.65) (layer "F.SilkS") + (fp_text reference "L33" (at 0 -1.65 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 2c88f5bd-c4fc-407e-9f1d-51b2b4e0fadc) ) - (fp_text value "140nH min" (at 0 1.65) (layer "F.Fab") + (fp_text value "140nH min" (at 0 1.65 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 713e4a0b-e50e-46a4-b1cd-67824e807265) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.08))) (tstamp 672a02d9-0eac-4548-baea-d287ca03d7d8) ) @@ -10724,10 +11004,10 @@ (fp_line (start -1 0.6) (end -1 -0.6) (layer "F.Fab") (width 0.1) (tstamp a29e3a0f-07be-424a-bf4f-a1abda0e3bc1)) (fp_line (start 1 0.6) (end -1 0.6) (layer "F.Fab") (width 0.1) (tstamp abaa7d65-a475-4780-a9a3-78c39b3a96a1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer "F.Fab") (width 0.1) (tstamp ad70445b-c889-46d6-9f05-7b7e6b6216d0)) - (pad "1" smd roundrect (at -1.025 0) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 128 "Net-(C120-Pad1)") (pinfunction "1") (pintype "passive") (tstamp f84f35be-edee-418e-91c3-e550e476a7be)) - (pad "2" smd roundrect (at 1.025 0) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 120 "Net-(C111-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 2da5f12c-acba-4bf5-96f0-ee3d1c94b41c)) + (pad "1" smd roundrect (at -1.025 0 90) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) + (net 127 "Net-(C120-Pad1)") (pinfunction "1") (pintype "passive") (tstamp f84f35be-edee-418e-91c3-e550e476a7be)) + (pad "2" smd roundrect (at 1.025 0 90) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) + (net 119 "Net-(C111-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 2da5f12c-acba-4bf5-96f0-ee3d1c94b41c)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -10737,7 +11017,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 63c2f6e5-d393-43f7-acba-2ec2cfd3b590) - (at 236.932 -54.292) + (at 67.31 -11.43) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -10770,7 +11050,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 2c25b7a6-d49e-4039-b301-64150f703ab9)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 257 "/70MHz VHF Frontend/EN_VRX") (pintype "passive") (tstamp a5382df0-fde4-4d57-8c96-e0252c52ca09)) + (net 256 "/70MHz VHF Frontend/EN_VRX") (pintype "passive") (tstamp a5382df0-fde4-4d57-8c96-e0252c52ca09)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -10861,19 +11141,19 @@ (fp_line (start -7.375 1.6) (end -7.375 2.2) (layer "F.Fab") (width 0.1) (tstamp e94d27fd-8bb1-40b0-8c77-24e272b2fb94)) (fp_line (start 7.375 2.2) (end 5.875 2.2) (layer "F.Fab") (width 0.1) (tstamp ed6eedd8-3f30-4782-a07a-314b539aa716)) (pad "1" smd roundrect (at -4.375 -2.4) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 232 "/Control on separate board/CW_TIP") (pinfunction "Pin_1") (pintype "passive") (tstamp 503d1100-49a6-4666-b224-f611ebd24248)) + (net 231 "/Control on separate board/CW_TIP") (pinfunction "Pin_1") (pintype "passive") (tstamp 503d1100-49a6-4666-b224-f611ebd24248)) (pad "2" smd roundrect (at -3.125 -2.4) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 233 "/Control on separate board/CW_RING") (pinfunction "Pin_2") (pintype "passive") (tstamp 9ce647a0-cf5a-4ca7-b878-802f48e1c41d)) + (net 232 "/Control on separate board/CW_RING") (pinfunction "Pin_2") (pintype "passive") (tstamp 9ce647a0-cf5a-4ca7-b878-802f48e1c41d)) (pad "3" smd roundrect (at -1.875 -2.4) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 234 "/Control on separate board/CW_KEYn") (pinfunction "Pin_3") (pintype "passive") (tstamp f611d167-020b-429c-a697-702e7dbae2f0)) + (net 233 "/Control on separate board/CW_KEYn") (pinfunction "Pin_3") (pintype "passive") (tstamp f611d167-020b-429c-a697-702e7dbae2f0)) (pad "4" smd roundrect (at -0.625 -2.4) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 235 "/Control on separate board/MIC_PTTn") (pinfunction "Pin_4") (pintype "passive") (tstamp 4c567d18-fee0-43b4-8ae0-fd9259371933)) + (net 234 "/Control on separate board/MIC_PTTn") (pinfunction "Pin_4") (pintype "passive") (tstamp 4c567d18-fee0-43b4-8ae0-fd9259371933)) (pad "5" smd roundrect (at 0.625 -2.4) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 236 "/Control on separate board/EN_TX") (pinfunction "Pin_5") (pintype "passive") (tstamp 721eec1c-2c7a-4f66-98af-51ea9feab969)) + (net 235 "/Control on separate board/EN_TX") (pinfunction "Pin_5") (pintype "passive") (tstamp 721eec1c-2c7a-4f66-98af-51ea9feab969)) (pad "6" smd roundrect (at 1.875 -2.4) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 237 "/Control on separate board/EN_RX") (pinfunction "Pin_6") (pintype "passive") (tstamp 7cf802dd-64ce-4a6b-9e1f-110468e8f426)) + (net 236 "/Control on separate board/EN_RX") (pinfunction "Pin_6") (pintype "passive") (tstamp 7cf802dd-64ce-4a6b-9e1f-110468e8f426)) (pad "7" smd roundrect (at 3.125 -2.4) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 171 "/Control on separate board/5V") (pinfunction "Pin_7") (pintype "passive") (tstamp cc52e3c4-e895-46f8-a7c7-c4618f6c2bd7)) + (net 170 "/Control on separate board/5V") (pinfunction "Pin_7") (pintype "passive") (tstamp cc52e3c4-e895-46f8-a7c7-c4618f6c2bd7)) (pad "8" smd roundrect (at 4.375 -2.4) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "Pin_8") (pintype "passive") (tstamp 2c5602f9-5278-4026-b43c-0ac2d7eff891)) (pad "MP" smd roundrect (at -6.925 0.5) (size 2.1 3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.119048) (tstamp 2a334310-15d5-4cf4-abb3-226ae00ed0c5)) @@ -10932,7 +11212,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 64dcfc76-e96a-40d5-8c1c-56b78993f393) - (at 223.302 -42.082) + (at 113.066 -31.668) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -10963,9 +11243,9 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp f175bb4d-8020-421b-b943-478433163d62)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp fe273e5f-f4e2-4b1f-a862-b049542805d4)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 315 "/70MHz VHF Frontend/+9V_FE") (pintype "passive") (tstamp 9a4fee85-64ae-4218-a076-0947ef626160)) + (net 314 "/70MHz VHF Frontend/+9V_FE") (pintype "passive") (tstamp 9a4fee85-64ae-4218-a076-0947ef626160)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 318 "Net-(Q27-Pad4)") (pintype "passive") (tstamp ae57c28e-2b2e-478c-83cf-523e9908e080)) + (net 317 "Net-(Q27-Pad4)") (pintype "passive") (tstamp ae57c28e-2b2e-478c-83cf-523e9908e080)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11019,7 +11299,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 65b287f5-5b51-40b2-a254-fb45338c5936) - (at 205.362 -28.992) + (at 197.104 -5.588) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -11052,7 +11332,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 4e6345d6-ab82-4c48-a513-f0cb3b40e4ae)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 107 "/70MHz VHF Frontend/TX_FROM_MIX") (pintype "passive") (tstamp 6387c849-0e8f-4c06-968b-65f667e05214)) + (net 106 "/70MHz VHF Frontend/TX_FROM_MIX") (pintype "passive") (tstamp 6387c849-0e8f-4c06-968b-65f667e05214)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11093,9 +11373,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 8f535125-3e01-473a-84ed-4449e85bbc57)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 96920920-d2ba-417e-96d1-3b629c31c79c)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 285 "Net-(J36-Pad3)") (pintype "passive") (tstamp 4d23fbc9-a539-4a18-9fd6-b44422dc3f28)) + (net 284 "Net-(J36-Pad3)") (pintype "passive") (tstamp 4d23fbc9-a539-4a18-9fd6-b44422dc3f28)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 353 "/Control on separate board/BOOT0") (pintype "passive") (tstamp 98aa8634-2cb3-43a2-ada2-04829826c356)) + (net 352 "/Control on separate board/BOOT0") (pintype "passive") (tstamp 98aa8634-2cb3-43a2-ada2-04829826c356)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11136,9 +11416,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 387d5fe7-0209-4bae-9b4c-7c117183b412)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c032bd51-d377-488c-b029-cbdea08e36fa)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 326 "Net-(R36-Pad1)") (pintype "passive") (tstamp 68d9af79-976e-490b-bf12-832c5e1f526c)) + (net 325 "Net-(R36-Pad1)") (pintype "passive") (tstamp 68d9af79-976e-490b-bf12-832c5e1f526c)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 325 "Net-(R35-Pad1)") (pintype "passive") (tstamp c2dd9471-8195-46af-8d86-93c89f201028)) + (net 324 "Net-(R35-Pad1)") (pintype "passive") (tstamp c2dd9471-8195-46af-8d86-93c89f201028)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11146,38 +11426,9 @@ ) ) - (footprint "mpb:AirCoil-8mm" (layer "F.Cu") - (tedit 5E4EB890) (tstamp 66bf3980-4974-401d-a535-47387d60d5a8) - (at 176.052 -21.932) - (property "MPN" "") - (property "Need_order" "0") - (property "Sheetfile" "frontend_70.kicad_sch") - (property "Sheetname" "70MHz VHF Frontend") - (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/76179d30-21d5-41ee-917a-56542e499bdf") - (attr through_hole) - (fp_text reference "L31" (at 1.5 0 90) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 17b15088-b882-45d3-8d68-de967c8e3e2e) - ) - (fp_text value "110nH" (at -2.5 0 90) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp f6d3544b-14c0-4dc9-8047-81a0038c14cb) - ) - (fp_line (start 3.5 6) (end 3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp 16bfa638-0e92-4d7b-95a0-898bbbf782f5)) - (fp_line (start -3.5 6) (end 3.5 6) (layer "F.SilkS") (width 0.15) (tstamp 8748a152-79ca-449f-b86a-6cc1470a1f8a)) - (fp_line (start -3.5 -6) (end -3.5 6) (layer "F.SilkS") (width 0.15) (tstamp 924056fc-fc03-421b-a8c7-bd2d5159e6fc)) - (fp_line (start 3.5 -6) (end -3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp fe575c2d-eaba-47ac-bb28-d4d07fb2f1ed)) - (fp_arc (start 0 3) (mid -1.5 1.5) (end 0 0) (layer "F.SilkS") (width 0.15) (tstamp 1dbf3a49-01b9-46ca-b28d-46aba86a1835)) - (fp_arc (start 0 0) (mid -1.5 -1.5) (end 0 -3) (layer "F.SilkS") (width 0.15) (tstamp a5789b16-99c4-4472-9e86-0dd7f6f3292c)) - (pad "1" thru_hole circle (at 0 -4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 113 "Net-(C103-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 5a9e1cd5-1462-416e-863d-a90227077352)) - (pad "2" thru_hole circle (at 0 4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 51ae87e6-a5de-4b76-92b1-e0c36d577c99)) - ) - (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp 66f728da-d265-4ade-a71e-5eecc91dc965) - (at 236.855 80.01) + (at 116.796 171.526) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -11238,7 +11489,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp dd9c02be-6222-41ed-89d0-957e74b7ba2b)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 281 "Net-(J34-Pad4)") (pintype "passive") (tstamp 2d78cb80-dd1e-4a8c-a7b6-035b8770ced4)) + (net 280 "Net-(J34-Pad4)") (pintype "passive") (tstamp 2d78cb80-dd1e-4a8c-a7b6-035b8770ced4)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11248,7 +11499,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 674fca1d-64ab-4803-a67e-45402d128b72) - (at 223.302 -37.062) + (at 168.402 -33.782) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -11281,7 +11532,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 36dedf35-22a6-4bb1-ad18-78e93ea44b57)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 332 "Net-(R111-Pad2)") (pintype "passive") (tstamp 66f860f6-f658-4272-bead-7ac0daaffb12)) + (net 331 "Net-(R111-Pad2)") (pintype "passive") (tstamp 66f860f6-f658-4272-bead-7ac0daaffb12)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11335,7 +11586,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 68ef0e84-0693-44ac-86bc-e43d628ae85f) - (at 205.362 -26.482) + (at 175.514 -30.48) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -11366,9 +11617,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 79107dfe-c19b-4125-bb27-21cdf13f5162)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp e7c865ac-fcfd-4bdc-a01a-3e52b093a308)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 332 "Net-(R111-Pad2)") (pintype "passive") (tstamp 22afd777-a2e2-4d8d-9615-15619c73c94c)) + (net 331 "Net-(R111-Pad2)") (pintype "passive") (tstamp 22afd777-a2e2-4d8d-9615-15619c73c94c)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 118 "Net-(C109-Pad2)") (pintype "passive") (tstamp 9de0cff8-7452-4d1a-a738-fd07873ecbe2)) + (net 117 "Net-(C109-Pad2)") (pintype "passive") (tstamp 9de0cff8-7452-4d1a-a738-fd07873ecbe2)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11378,7 +11629,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 69719fde-f602-4a2e-8187-82dde5d29328) - (at 353.904 -32.604) + (at 148.545 223.301) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -11411,7 +11662,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp e2c7be2e-fec7-42c7-b910-3a1c89400621)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 334 "Net-(R140-Pad1)") (pintype "passive") (tstamp ea5cdc13-06e2-4e5c-9c6b-7caba8d7f2b7)) + (net 333 "Net-(R140-Pad1)") (pintype "passive") (tstamp ea5cdc13-06e2-4e5c-9c6b-7caba8d7f2b7)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11452,9 +11703,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp cd278e5b-4bc0-4c86-8eac-f1eb37fe57e3)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e0032ebe-5a20-4556-b8ae-e83ff60659d9)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 290 "Net-(L19-Pad1)") (pintype "passive") (tstamp 20de69b1-4459-4026-8762-5400c20e2a48)) + (net 289 "Net-(L19-Pad1)") (pintype "passive") (tstamp 20de69b1-4459-4026-8762-5400c20e2a48)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 256 "/Baseband/VHF_OUT") (pintype "passive") (tstamp cfb9ac05-bf0e-4848-b38e-348012d98ec8)) + (net 255 "/Baseband/VHF_OUT") (pintype "passive") (tstamp cfb9ac05-bf0e-4848-b38e-348012d98ec8)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11464,7 +11715,7 @@ (footprint "Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical" (layer "F.Cu") (tedit 59FED5CC) (tstamp 6a486762-d45a-4fef-9737-8c5929172da2) - (at 27.59 -46.27) + (at -105.42 53.836) (descr "Through hole straight pin header, 1x02, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x02 2.54mm single row") (property "Need_order" "0") @@ -11500,7 +11751,7 @@ (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp d35686d3-2043-46e8-85fd-1f3748a56dd4)) (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp d784e9d6-8b73-40f7-adf5-57738062b561)) (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 172 "Net-(D2-Pad1)") (pinfunction "In") (pintype "passive") (tstamp 0d5bf384-751e-4694-9686-db540a50da29)) + (net 171 "Net-(D2-Pad1)") (pinfunction "In") (pintype "passive") (tstamp 0d5bf384-751e-4694-9686-db540a50da29)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Ext") (pintype "passive") (tstamp 36dbce38-b001-41f9-a446-65f955bc974b)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl" @@ -11512,7 +11763,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 6abcc40e-15fd-452e-b20b-8dbf491b271f) - (at 30.84 -12.73) + (at -102.17 87.376) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -11543,7 +11794,7 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 723abcb6-7f74-4577-91da-c6ce20391ce5)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp dd134781-b374-404e-a2fa-67242f51ba13)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 261 "/CLK1") (pintype "passive") (tstamp 03b6104a-3618-4801-9332-090570a6b2ff)) + (net 260 "/CLK1") (pintype "passive") (tstamp 03b6104a-3618-4801-9332-090570a6b2ff)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp a5651898-5518-4d2a-ad70-6526107a592d)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -11555,7 +11806,7 @@ (footprint "Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical" (layer "F.Cu") (tedit 59FED5CC) (tstamp 6c2d0067-dec9-4457-b9a2-7fda53850b22) - (at 47.05 -20.59) + (at -85.96 79.516) (descr "Through hole straight pin header, 1x02, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x02 2.54mm single row") (property "Need_order" "0") @@ -11591,7 +11842,7 @@ (fp_line (start 1.27 3.81) (end -1.27 3.81) (layer "F.Fab") (width 0.1) (tstamp 9f401745-7987-4a65-8a3d-74aa01f812ef)) (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp c4390774-420f-4e08-bbf4-f83af30077bc)) (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 261 "/CLK1") (pinfunction "Pin_1") (pintype "passive") (tstamp a7a5bf32-0d47-416f-9a46-bc0518890cb3)) + (net 260 "/CLK1") (pinfunction "Pin_1") (pintype "passive") (tstamp a7a5bf32-0d47-416f-9a46-bc0518890cb3)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_2") (pintype "passive") (tstamp e5e174bd-b7d7-4592-96e6-0ed87c1d0780)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl" @@ -11603,7 +11854,7 @@ (footprint "Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 6cafca51-18c6-4c43-9e3c-83940d0d4af1) - (at 168.682 -18.382) + (at 58.446 -7.968) (descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "TAJA106K016RNJ") @@ -11636,7 +11887,7 @@ (fp_line (start 1.6 1.25) (end -1.6 1.25) (layer "F.Fab") (width 0.1) (tstamp ab4291a4-62c6-4042-85cf-382889f92f69)) (fp_line (start -1.6 1.25) (end -1.6 -1.25) (layer "F.Fab") (width 0.1) (tstamp b651cdda-1d28-424b-9e82-c0206cfec0d1)) (pad "1" smd roundrect (at -1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) - (net 127 "Net-(C119-Pad1)") (pintype "passive") (tstamp 0f1f8d67-726c-41ec-969b-66d2251f9d42)) + (net 126 "Net-(C119-Pad1)") (pintype "passive") (tstamp 0f1f8d67-726c-41ec-969b-66d2251f9d42)) (pad "2" smd roundrect (at 1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) (net 2 "GND") (pintype "passive") (tstamp 210f2a2a-cbc8-4694-a46b-c40f58ed71e7)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" @@ -11691,7 +11942,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 6d989b5d-e42d-4c95-ab21-c8649348d8ac) - (at 237.272 -51.782) + (at 174.752 -25.4 -90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -11699,15 +11950,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/5f7bc9ab-42b6-48d7-b68a-0990be73cf8b") (attr smd) - (fp_text reference "R116" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R116" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp f4b6851b-dba7-4413-ab00-b27b240f9867) ) - (fp_text value "1.2k" (at 0 1.43) (layer "F.Fab") + (fp_text value "1.2k" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 441f9223-8d3b-4b68-bb7e-50a131ce4f2f) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 337d6f29-9347-447c-ba4b-c0882f9a36ee) ) @@ -11721,9 +11972,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 66fc7235-4e04-4f93-ad7c-51ed9baea06a)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp d792890a-7488-4280-9395-0b11a073cb75)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e9efdab4-1c81-4453-b89c-b657b7e694de)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 117 "Net-(C108-Pad1)") (pintype "passive") (tstamp 1495968a-bab4-47ab-8091-950e3ba7bc29)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 116 "Net-(C108-Pad1)") (pintype "passive") (tstamp 1495968a-bab4-47ab-8091-950e3ba7bc29)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 4e4c3b34-b7da-472a-b38c-3d9da59d91f4)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) @@ -11734,7 +11985,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 6dd0430c-d3f0-4330-8aa0-de4469c9ca2f) - (at 204.662 -18.952) + (at 94.426 -8.538) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -11765,9 +12016,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp c16380a7-f0cf-4562-814b-e026cbd69d11)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c9101190-7a70-45b5-bb2a-ab48bafaedf0)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 315 "/70MHz VHF Frontend/+9V_FE") (pintype "passive") (tstamp 224d27fd-6fdc-4d0e-adce-f4568a1c1494)) + (net 314 "/70MHz VHF Frontend/+9V_FE") (pintype "passive") (tstamp 224d27fd-6fdc-4d0e-adce-f4568a1c1494)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 316 "Net-(Q26-Pad4)") (pintype "passive") (tstamp db633ef6-3e2c-4467-932c-b06705fdb692)) + (net 315 "Net-(Q26-Pad4)") (pintype "passive") (tstamp db633ef6-3e2c-4467-932c-b06705fdb692)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11777,7 +12028,7 @@ (footprint "Package_SO:MSOP-10_3x3mm_P0.5mm" (layer "F.Cu") (tedit 5A02F25C) (tstamp 6e20b75b-acc8-418b-a9d3-da412bb06356) - (at 73.85 -56.74) + (at -59.16 43.366) (descr "10-Lead Plastic Micro Small Outline Package (MS) [MSOP] (see Microchip Packaging Specification 00000049BS.pdf)") (tags "SSOP 0.5") (property "MPN" "Si5351A-B-GT") @@ -11819,11 +12070,11 @@ (pad "2" smd rect (at -2.2 -0.5) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 12 "Net-(C11-Pad2)") (pinfunction "XA") (pintype "input") (tstamp 3b50857f-37b6-4da0-a881-caeb7c7dcca3)) (pad "3" smd rect (at -2.2 0) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") - (net 361 "Net-(U4-Pad3)") (pinfunction "XB") (pintype "input") (tstamp 62e365c8-09df-4fe0-ae0b-3243d3f2e3d4)) + (net 360 "Net-(U4-Pad3)") (pinfunction "XB") (pintype "input") (tstamp 62e365c8-09df-4fe0-ae0b-3243d3f2e3d4)) (pad "4" smd rect (at -2.2 0.5) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") - (net 253 "/SCL") (pinfunction "SCL") (pintype "input") (tstamp 35ef58c8-fd64-4037-b006-1848f2baae6f)) + (net 252 "/SCL") (pinfunction "SCL") (pintype "input") (tstamp 35ef58c8-fd64-4037-b006-1848f2baae6f)) (pad "5" smd rect (at -2.2 1) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") - (net 252 "/SDA") (pinfunction "SDA") (pintype "bidirectional") (tstamp acc42e1f-574d-4404-adba-a21811e58c60)) + (net 251 "/SDA") (pinfunction "SDA") (pintype "bidirectional") (tstamp acc42e1f-574d-4404-adba-a21811e58c60)) (pad "6" smd rect (at 2.2 1) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 15 "Net-(C15-Pad1)") (pinfunction "CLK2") (pintype "output") (tstamp fd0c647a-7862-4060-b31b-fcb6694407fd)) (pad "7" smd rect (at 2.2 0.5) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") @@ -11893,13 +12144,13 @@ (pad "" np_thru_hole circle (at 0 4.5 270) (size 1.7 1.7) (drill 1.7) (layers *.Cu *.Mask) (tstamp 7171d7a4-94b9-4d32-9cbe-bbed43ca980d)) (pad "" np_thru_hole circle (at 0 -2.5 270) (size 1.7 1.7) (drill 1.7) (layers *.Cu *.Mask) (tstamp dd13e2eb-ba7d-4803-9170-a795b61aa3c0)) (pad "R" smd rect (at 3.7 -1.6 270) (size 2.8 2.2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 225 "/CW_RING") (pintype "passive") (tstamp 9a83c883-2c55-4aee-8419-40dd25f5ee7b)) + (net 224 "/CW_RING") (pintype "passive") (tstamp 9a83c883-2c55-4aee-8419-40dd25f5ee7b)) (pad "S" smd rect (at -3.7 -3.6 270) (size 2.8 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pintype "passive") (tstamp 65f948bf-20bd-4d66-8950-bc2f74cebf25)) (pad "T" smd rect (at -3.7 5.8 270) (size 2.8 2.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 226 "/CW_TIP") (pintype "passive") (tstamp 7051a759-0509-4b67-b4c7-21e103d29c6f)) + (net 225 "/CW_TIP") (pintype "passive") (tstamp 7051a759-0509-4b67-b4c7-21e103d29c6f)) (pad "TN" smd rect (at 0.75 9.8 270) (size 2.8 2.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 227 "unconnected-(J5-PadTN)") (pintype "passive+no_connect") (tstamp fae3c186-3679-45c0-beeb-c3ffbd991705)) + (net 226 "unconnected-(J5-PadTN)") (pintype "passive+no_connect") (tstamp fae3c186-3679-45c0-beeb-c3ffbd991705)) (model "${KICAD6_3DMODEL_DIR}/Connector_Audio.3dshapes/Jack_3.5mm_CUI_SJ-3524-SMT_Horizontal.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11909,7 +12160,7 @@ (footprint "mpb:CX3225SB" (layer "F.Cu") (tedit 5E4EE75C) (tstamp 6e923c0f-2ff4-4a14-87f9-c38ca931dc1c) - (at 59.575 -15.555) + (at -73.435 84.551) (descr "SMD Crystal EuroQuartz MJ series http://cdn-reichelt.de/documents/datenblatt/B400/MJ.pdf, hand-soldering, 5.0x3.2mm^2 package") (tags "SMD SMT crystal hand-soldering") (property "MPN" "CX3225SB25000DFPLCC / LFXTAL051068") @@ -11950,7 +12201,7 @@ (fp_line (start -2.5 -1.5) (end -2.4 -1.6) (layer "F.Fab") (width 0.1) (tstamp a4722702-8181-4789-84de-030a891c5fbf)) (fp_line (start -2.4 1.6) (end -2.5 1.5) (layer "F.Fab") (width 0.1) (tstamp fddc72ac-60b0-45bc-85c0-375acf026446)) (pad "1" smd rect locked (at -1.15 0.925) (size 1.3 1.05) (layers "F.Cu" "F.Paste" "F.Mask") - (net 361 "Net-(U4-Pad3)") (pinfunction "1") (pintype "passive") (tstamp 7c1f8c20-bab9-40b3-aa07-257f7feec588)) + (net 360 "Net-(U4-Pad3)") (pinfunction "1") (pintype "passive") (tstamp 7c1f8c20-bab9-40b3-aa07-257f7feec588)) (pad "2" smd rect locked (at 1.15 0.925) (size 1.3 1.05) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp fcc34a11-1d64-4a50-864c-a523f002426b)) (pad "3" smd rect locked (at 1.15 -0.925) (size 1.3 1.05) (layers "F.Cu" "F.Paste" "F.Mask") @@ -11966,7 +12217,7 @@ (footprint "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" (layer "F.Cu") (tedit 5D9F72B1) (tstamp 6ea4f638-99aa-4c1f-950e-3b9445240cef) - (at 339.034 -46.394) + (at 133.675 209.511) (descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "SOIC SO") (property "MPN" "IRF7309TRPBF") @@ -12003,19 +12254,19 @@ (pad "1" smd roundrect (at -2.475 -1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "S") (pintype "passive") (tstamp 4e8b7086-e230-4068-b1b8-bc26b2bace6d)) (pad "2" smd roundrect (at -2.475 -0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 260 "/PA 70MHz/EN_PA") (pinfunction "G") (pintype "input") (tstamp 758559d6-b732-4cba-a3e9-5a1a85ae0c09)) + (net 259 "/PA 70MHz/EN_PA") (pinfunction "G") (pintype "input") (tstamp 758559d6-b732-4cba-a3e9-5a1a85ae0c09)) (pad "3" smd roundrect (at -2.475 0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 140 "/PA 70MHz/12V") (pinfunction "1") (pintype "passive") (tstamp 45293af2-ce57-4af4-9ef2-50292a4af267)) + (net 139 "/PA 70MHz/12V") (pinfunction "1") (pintype "passive") (tstamp 45293af2-ce57-4af4-9ef2-50292a4af267)) (pad "4" smd roundrect (at -2.475 1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 319 "Net-(Q30-Pad4)") (pinfunction "G") (pintype "input") (tstamp 4f98e5f0-0410-410c-9078-1bcf9a64a49c)) + (net 318 "Net-(Q30-Pad4)") (pinfunction "G") (pintype "input") (tstamp 4f98e5f0-0410-410c-9078-1bcf9a64a49c)) (pad "5" smd roundrect (at 2.475 1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 154 "Net-(C152-Pad1)") (pinfunction "D") (pintype "passive") (tstamp fae91440-3a3e-4140-8d27-bc4e347625b0)) + (net 153 "Net-(C152-Pad1)") (pinfunction "D") (pintype "passive") (tstamp fae91440-3a3e-4140-8d27-bc4e347625b0)) (pad "6" smd roundrect (at 2.475 0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 154 "Net-(C152-Pad1)") (pinfunction "D") (pintype "passive") (tstamp ed940257-c3d7-4894-99bf-b6167f7289eb)) + (net 153 "Net-(C152-Pad1)") (pinfunction "D") (pintype "passive") (tstamp ed940257-c3d7-4894-99bf-b6167f7289eb)) (pad "7" smd roundrect (at 2.475 -0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 319 "Net-(Q30-Pad4)") (pinfunction "D") (pintype "passive") (tstamp bea76b18-bd68-405d-a33c-fedd9cde0140)) + (net 318 "Net-(Q30-Pad4)") (pinfunction "D") (pintype "passive") (tstamp bea76b18-bd68-405d-a33c-fedd9cde0140)) (pad "8" smd roundrect (at 2.475 -1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 319 "Net-(Q30-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 39f8213b-b0be-445e-875e-bb44b6bd5525)) + (net 318 "Net-(Q30-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 39f8213b-b0be-445e-875e-bb44b6bd5525)) (model "${KICAD6_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -12053,7 +12304,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 6fe2501f-b1cc-4167-85a2-c1f8e3cdb2c3) - (at 223.822 -45.152) + (at 177.546 -35.306 -90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -12061,15 +12312,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/f5831d0e-0f03-47ce-9bb4-db393b7d7f29") (attr smd) - (fp_text reference "R114" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R114" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp d576decb-6282-4295-a62a-9f6ed82dca17) ) - (fp_text value "100" (at 0 1.43) (layer "F.Fab") + (fp_text value "100" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp ae404599-ba57-44ae-b355-6a57a6642016) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 6e3ca00c-f0f8-4ca3-bacc-4cafe559bc1b) ) @@ -12083,10 +12334,10 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 4f2ce26e-be73-45c0-8185-838ed3def376)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c4fed199-61de-4308-8a56-faf7408bad41)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp def0b41c-4fad-418e-bfae-8d004ca86651)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 317 "/70MHz VHF Frontend/+VRX_FE") (pintype "passive") (tstamp fe3cc6a1-be61-4d98-ac72-351f02ca0a05)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 118 "Net-(C109-Pad2)") (pintype "passive") (tstamp d0432e1e-f00f-41ce-8506-88a3911ae62d)) + (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 316 "/70MHz VHF Frontend/+VRX_FE") (pintype "passive") (tstamp fe3cc6a1-be61-4d98-ac72-351f02ca0a05)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 117 "Net-(C109-Pad2)") (pintype "passive") (tstamp d0432e1e-f00f-41ce-8506-88a3911ae62d)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -12096,7 +12347,7 @@ (footprint "mpb:two_2mm_pads_for_diode" (layer "F.Cu") (tedit 5FBA90BC) (tstamp 701ecd40-02f8-4ed5-9b2a-33c758275547) - (at 313.534 -25.279) + (at 108.175 230.626) (property "MPN" "") (property "Need_order" "") (property "Sheetfile" "pa_70.kicad_sch") @@ -12116,12 +12367,12 @@ (pad "1" smd rect locked (at 0 -4) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "K") (pintype "passive") (tstamp 9408a3ae-b5a1-4ec0-8429-ef5f84866750)) (pad "2" smd rect locked (at 0 4) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 364 "Net-(D22-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 5e268966-b7fd-4d9c-9cf3-b4b0f11d9911)) + (net 363 "Net-(D22-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 5e268966-b7fd-4d9c-9cf3-b4b0f11d9911)) ) (footprint "TestPoint:TestPoint_Pad_4.0x4.0mm" (layer "F.Cu") (tedit 5A0F774F) (tstamp 70f71505-ec7a-43b2-b3ac-2f0f5c1bca5d) - (at 356.534 -50.604) + (at 151.175 205.301) (descr "SMD rectangular pad as test Point, square 4.0mm side length") (tags "test point SMD pad rectangle square") (property "Need_order" "0") @@ -12150,12 +12401,12 @@ (fp_line (start -2.5 -2.5) (end 2.5 -2.5) (layer "F.CrtYd") (width 0.05) (tstamp 3982cf8a-31ce-4941-b3f2-96cc79a83fa1)) (fp_line (start 2.5 2.5) (end 2.5 -2.5) (layer "F.CrtYd") (width 0.05) (tstamp 86f15398-5b39-4d1b-8876-b3d22d7a77ec)) (pad "1" smd rect (at 0 0) (size 4 4) (layers "F.Cu" "F.Mask") - (net 159 "Net-(C161-Pad2)") (pinfunction "Pin_1") (pintype "passive") (tstamp 0a88780b-56a3-413d-baba-1921701bbcf0)) + (net 158 "Net-(C161-Pad2)") (pinfunction "Pin_1") (pintype "passive") (tstamp 0a88780b-56a3-413d-baba-1921701bbcf0)) ) (footprint "Package_TO_SOT_SMD:SOT-23_Handsoldering" (layer "F.Cu") (tedit 5A0AB76C) (tstamp 715429a3-62d6-4fcf-afd2-9ea257d49cc5) - (at 52.6 -13.49) + (at -80.41 86.616) (descr "SOT-23, Handsoldering") (tags "SOT-23") (property "MPN" "BAT18") @@ -12190,7 +12441,7 @@ (fp_line (start -0.7 -0.95) (end -0.7 1.5) (layer "F.Fab") (width 0.1) (tstamp 9aefac67-cb0a-4fde-823f-c9abadaa682f)) (fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp d4da0d5b-9edd-44d4-add0-47edfaf652bf)) (pad "1" smd rect (at -1.5 -0.95) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 366 "Net-(D1-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 56dbd49d-f837-49a1-a1f0-a12010bb7e38)) + (net 365 "Net-(D1-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 56dbd49d-f837-49a1-a1f0-a12010bb7e38)) (pad "2" smd rect (at -1.5 0.95) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp 30a53677-4774-4034-b9b6-a952e29af731)) (pad "3" smd rect (at 1.5 0) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") (net 20 "Net-(C17-Pad2)") (pinfunction "K") (pintype "passive") (tstamp 9335b707-f426-4457-bdcf-cac94759e614)) @@ -12238,7 +12489,7 @@ (fp_line (start -0.65 1.45) (end -0.65 -1.125) (layer "F.Fab") (width 0.1) (tstamp 101d5734-a534-46e8-9325-64a96716a9ad)) (fp_line (start -0.65 -1.125) (end -0.325 -1.45) (layer "F.Fab") (width 0.1) (tstamp 7d338af1-8851-40dd-b27e-6a7aa7db9eb8)) (pad "1" smd roundrect (at -0.9375 -0.95 180) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 301 "Net-(Q7-Pad1)") (pinfunction "B") (pintype "input") (tstamp 889836ca-39e2-498a-9189-6fdd630958a8)) + (net 300 "Net-(Q7-Pad1)") (pinfunction "B") (pintype "input") (tstamp 889836ca-39e2-498a-9189-6fdd630958a8)) (pad "2" smd roundrect (at -0.9375 0.95 180) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "E") (pintype "passive") (tstamp aff399f1-48d2-4caf-9202-84d008cfe175)) (pad "3" smd roundrect (at 0.9375 0 180) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) @@ -12252,7 +12503,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 7335f41f-5d03-45ca-9ee2-39af3facabc3) - (at 378.644 -59.524) + (at 173.285 196.381) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -12283,9 +12534,9 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 6eab9cbc-0b19-4a5d-a0b4-d5e5f5a7e649)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 846ff0fe-b2d3-44c2-bd24-854c3df26c08)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 140 "/PA 70MHz/12V") (pintype "passive") (tstamp 2c79c5b2-fcdd-4af5-8ffc-0cffb51511a6)) + (net 139 "/PA 70MHz/12V") (pintype "passive") (tstamp 2c79c5b2-fcdd-4af5-8ffc-0cffb51511a6)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 319 "Net-(Q30-Pad4)") (pintype "passive") (tstamp a61da465-f15f-447b-8281-d3af4253eac2)) + (net 318 "Net-(Q30-Pad4)") (pintype "passive") (tstamp a61da465-f15f-447b-8281-d3af4253eac2)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -12326,9 +12577,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp a1fc3ffa-c5f8-4ace-a03c-486c071f601f)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp d42b951c-a1fc-4355-8e25-ef20e745925b)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp fdefab12-8a0d-4592-9d9c-de2bce3ed207)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp fdefab12-8a0d-4592-9d9c-de2bce3ed207)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 269 "/Control on separate board/I2C2_SDA") (pintype "passive") (tstamp bb2508b5-c159-4c62-9228-b8f0322d03e7)) + (net 268 "/Control on separate board/I2C2_SDA") (pintype "passive") (tstamp bb2508b5-c159-4c62-9228-b8f0322d03e7)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -12382,7 +12633,7 @@ (footprint "mpb:MABA 009488 61HWCA" (layer "F.Cu") (tedit 5C321D62) (tstamp 74c9db19-7436-4c59-a0bb-148e0c7ca112) - (at 215.265 32.695 180) + (at 53.863 124.135 180) (tags "balun RF 1:4") (property "MPN" "MABA-009488") (property "Need_order" "1") @@ -12416,11 +12667,11 @@ (pad "1" smd rect (at -1.59 -1.27 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "PR1") (pintype "passive") (clearance 0.2) (tstamp 682b3012-3ee0-4050-9c76-481d8d205767)) (pad "2" smd rect (at -1.59 0 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 356 "unconnected-(T5-Pad2)") (pinfunction "PM") (pintype "passive+no_connect") (clearance 0.2) (tstamp 7ad2718d-a0ce-4292-b6c9-3ebd3e0c6f32)) + (net 355 "unconnected-(T5-Pad2)") (pinfunction "PM") (pintype "passive+no_connect") (clearance 0.2) (tstamp 7ad2718d-a0ce-4292-b6c9-3ebd3e0c6f32)) (pad "3" smd rect (at -1.59 1.27 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 83 "Net-(C70-Pad2)") (pinfunction "PR2") (pintype "passive") (clearance 0.2) (tstamp 0370da26-0288-4f50-b3c8-3f33a63f8934)) (pad "4" smd rect (at 1.59 1.27 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 264 "Net-(J24-Pad2)") (pinfunction "S1") (pintype "passive") (clearance 0.2) (tstamp aa5eb22b-9ec5-405f-bf46-6204e5a7aae5)) + (net 263 "Net-(J24-Pad2)") (pinfunction "S1") (pintype "passive") (clearance 0.2) (tstamp aa5eb22b-9ec5-405f-bf46-6204e5a7aae5)) (pad "5" smd rect (at 1.59 0 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "S2") (pintype "passive") (clearance 0.2) (tstamp cda18b45-ae98-4bb3-a911-67cb820c898c)) (pad "6" smd rect (at 1.59 -1.27 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") @@ -12467,7 +12718,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 5d87c621-8142-43c1-9891-808b58b45b4d)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 331 "Net-(R101-Pad1)") (pintype "passive") (tstamp 366fc60d-c270-4793-a239-800275405168)) + (net 330 "Net-(R101-Pad1)") (pintype "passive") (tstamp 366fc60d-c270-4793-a239-800275405168)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -12477,7 +12728,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 75616da0-e9c1-48d9-a9c8-ddb6dc7894c9) - (at 366.734 -52.514) + (at 161.375 203.391) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor") (property "MPN" "") @@ -12511,7 +12762,7 @@ (pad "1" smd roundrect (at -0.95 0) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 7456e2c7-72ce-4fe5-b3d4-37487eea638b)) (pad "2" smd roundrect (at 0.95 0) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 141 "VGG1") (pintype "passive") (tstamp 4fd0439b-a491-4622-82da-e3fe151b07a3)) + (net 140 "VGG1") (pintype "passive") (tstamp 4fd0439b-a491-4622-82da-e3fe151b07a3)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -12521,7 +12772,7 @@ (footprint "mpb:two_2mm_pads_for_diode" (layer "F.Cu") (tedit 5FBA90BC) (tstamp 7602dc7f-fe5e-41c5-a219-fa0e39fc7cf4) - (at 310.384 -25.279) + (at 105.025 230.626) (property "MPN" "") (property "Need_order" "") (property "Sheetfile" "pa_70.kicad_sch") @@ -12541,7 +12792,7 @@ (pad "1" smd rect locked (at 0 -4) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "K") (pintype "passive") (tstamp 9660426d-017f-499c-bacb-88b1b9f389a1)) (pad "2" smd rect locked (at 0 4) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 196 "Net-(D21-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 72413058-e3f6-4e0f-94cb-6bfa8b065726)) + (net 195 "Net-(D21-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 72413058-e3f6-4e0f-94cb-6bfa8b065726)) ) (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") @@ -12607,7 +12858,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 88 "Net-(C74-Pad2)") (pintype "passive") (tstamp 096537f8-ccd3-4230-8e52-f726fe18282e)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 312 "Net-(Q21-Pad1)") (pintype "passive") (tstamp 3d35357b-5a9b-4d10-8886-840bb977702c)) + (net 311 "Net-(Q21-Pad1)") (pintype "passive") (tstamp 3d35357b-5a9b-4d10-8886-840bb977702c)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -12617,7 +12868,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 7728c4dd-1f9b-4aa8-bdd7-66ead8caf27b) - (at 195.562 -16.282) + (at 85.326 -5.868) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -12650,7 +12901,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 9196af4d-f3e9-4d74-9784-988fa729cac1)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 258 "/70MHz VHF Frontend/EN_VTX") (pintype "passive") (tstamp 5ee3fc66-4f19-4888-95e0-a642428b1f2c)) + (net 257 "/70MHz VHF Frontend/EN_VTX") (pintype "passive") (tstamp 5ee3fc66-4f19-4888-95e0-a642428b1f2c)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -12660,7 +12911,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 77cbd15f-8c51-4774-8da3-887dc4b54649) - (at 346.854 -26.834) + (at 141.495 229.071) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -12691,9 +12942,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 8ca9bb2f-5da9-456f-aaf5-ba92d511958a)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp d1d23ecd-3e0b-428d-b686-ea05f51f9547)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 294 "Net-(L39-Pad2)") (pintype "passive") (tstamp 92b83562-6e64-46ff-9ec6-a029fee3c419)) + (net 293 "Net-(L39-Pad2)") (pintype "passive") (tstamp 92b83562-6e64-46ff-9ec6-a029fee3c419)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 145 "Net-(C143-Pad2)") (pintype "passive") (tstamp 44edbf35-4c66-449e-a340-4531da2759bd)) + (net 144 "Net-(C143-Pad2)") (pintype "passive") (tstamp 44edbf35-4c66-449e-a340-4531da2759bd)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -12703,7 +12954,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 78458581-3f57-4ea1-bf3c-b788d6a52cc3) - (at 344.794 -29.594) + (at 139.435 226.311) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor") (property "Need_order" "0") @@ -12736,7 +12987,7 @@ (pad "1" smd roundrect (at -0.95 0) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 333fe18f-3ec0-44e6-b1e2-f872be1731f3)) (pad "2" smd roundrect (at 0.95 0) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 138 "Net-(C136-Pad1)") (pintype "passive") (tstamp 9338f839-5ddd-4648-bcb7-ebbb909aaa4c)) + (net 137 "Net-(C136-Pad1)") (pintype "passive") (tstamp 9338f839-5ddd-4648-bcb7-ebbb909aaa4c)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -12746,7 +12997,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 78e0b9fa-de58-48f8-9cf6-dfbc825fa3d0) - (at 104.18 -51.26) + (at -28.83 48.846) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -12779,7 +13030,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 9d45e7a4-8dff-4e22-bd65-b9eb9e5769ff)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 244 "/EN_VRX") (pintype "passive") (tstamp f3b1a489-0a03-4977-ab45-073c177127f2)) + (net 243 "/EN_VRX") (pintype "passive") (tstamp f3b1a489-0a03-4977-ab45-073c177127f2)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -12870,15 +13121,15 @@ (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp a8a866e3-c07e-41f1-b5cc-8d0f1b525220)) (fp_line (start 1.27 11.43) (end -1.27 11.43) (layer "F.Fab") (width 0.1) (tstamp b9d4dacf-a054-4578-b310-c11d282a73a5)) (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 164 "/Control on separate board/3.3V_UI") (pinfunction "Pin_1") (pintype "passive") (tstamp 8bba83af-53c9-45e6-86cb-3be12a4d5db1)) + (net 163 "/Control on separate board/3.3V_UI") (pinfunction "Pin_1") (pintype "passive") (tstamp 8bba83af-53c9-45e6-86cb-3be12a4d5db1)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 282 "/Control on separate board/SWCLK") (pinfunction "Pin_2") (pintype "passive") (tstamp f6aa5bc6-1040-4b15-be44-3de7b8ba72fb)) + (net 281 "/Control on separate board/SWCLK") (pinfunction "Pin_2") (pintype "passive") (tstamp f6aa5bc6-1040-4b15-be44-3de7b8ba72fb)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_3") (pintype "passive") (tstamp 9574a8d3-a08b-43d5-b85c-3f25ed5f22f8)) (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 283 "/Control on separate board/SWDIO") (pinfunction "Pin_4") (pintype "passive") (tstamp e7454932-5a84-463b-859f-5f1f3e00b73d)) + (net 282 "/Control on separate board/SWDIO") (pinfunction "Pin_4") (pintype "passive") (tstamp e7454932-5a84-463b-859f-5f1f3e00b73d)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 284 "/Control on separate board/RESETn") (pinfunction "Pin_5") (pintype "passive") (tstamp 11d29440-8f32-4774-b9ad-977d081ce1e6)) + (net 283 "/Control on separate board/RESETn") (pinfunction "Pin_5") (pintype "passive") (tstamp 11d29440-8f32-4774-b9ad-977d081ce1e6)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x05_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -12926,7 +13177,7 @@ (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 45 "Net-(C42-Pad1)") (pinfunction "Pin_1") (pintype "passive") (tstamp 62045955-853d-4d11-a021-1d97b7c6056c)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 262 "Net-(J22-Pad2)") (pinfunction "Pin_2") (pintype "passive") (tstamp 826495df-99ed-45aa-a9b4-80b233842c74)) + (net 261 "Net-(J22-Pad2)") (pinfunction "Pin_2") (pintype "passive") (tstamp 826495df-99ed-45aa-a9b4-80b233842c74)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -12968,9 +13219,9 @@ (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 822036de-8e35-445f-b207-61ad217ebb61)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp e560d271-e57d-4911-be4e-27eebd5d1ec5)) (pad "1" smd roundrect (at -0.875 0) (size 1.05 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 168 "Net-(C173-Pad2)") (pintype "passive") (tstamp 47f6e25e-1442-4d6f-bc58-b48fa3c6303d)) + (net 167 "Net-(C173-Pad2)") (pintype "passive") (tstamp 47f6e25e-1442-4d6f-bc58-b48fa3c6303d)) (pad "2" smd roundrect (at 0.875 0) (size 1.05 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 1e0fd6c3-b78c-49d3-b633-e7011d7db996)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 1e0fd6c3-b78c-49d3-b633-e7011d7db996)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -13013,7 +13264,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 7827f4a7-d530-49d7-b721-731b1d7cdc21)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 329 "Net-(R104-Pad2)") (pintype "passive") (tstamp b823b22f-9f0e-4bbd-a693-9725d61cefe3)) + (net 328 "Net-(R104-Pad2)") (pintype "passive") (tstamp b823b22f-9f0e-4bbd-a693-9725d61cefe3)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -13023,7 +13274,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 7c43fa73-6218-4929-9efa-57c7fdbfb417) - (at 210.112 -29.432) + (at 237.998 -7.112 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -13053,10 +13304,10 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 42233787-f6fb-47db-be23-462fa64cf900)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp a29db164-a0d5-4ca0-aefc-cf31aef49065)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp c13e4d7c-0d2c-44b2-8e59-e60dc757477e)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 314 "Net-(Q24-Pad4)") (pintype "passive") (tstamp fc9de27c-c4e6-4b1b-8abc-3bd6fe482dd9)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 116 "Net-(C107-Pad2)") (pintype "passive") (tstamp 67d18d86-7052-4677-83ef-54f179e70e81)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 313 "Net-(Q24-Pad4)") (pintype "passive") (tstamp fc9de27c-c4e6-4b1b-8abc-3bd6fe482dd9)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 115 "Net-(C107-Pad2)") (pintype "passive") (tstamp 67d18d86-7052-4677-83ef-54f179e70e81)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -13066,7 +13317,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 7d3aaf4b-9eee-4e79-8a3b-69788cf17ec1) - (at 246.032 -58.742) + (at 191.25 -61.924) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -13098,9 +13349,9 @@ (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp cd280ffd-58c5-4f81-8045-9804c29b284c)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp e573e477-dbc9-46b1-a3fd-42eb378d93b1)) (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 132 "Net-(C126-Pad1)") (pintype "passive") (tstamp 8d9d5956-3b5d-450e-b715-caf1969021c2)) + (net 131 "Net-(C126-Pad1)") (pintype "passive") (tstamp 8d9d5956-3b5d-450e-b715-caf1969021c2)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 130 "Net-(C121-Pad1)") (pintype "passive") (tstamp d60c4a79-bf0e-4ac4-836a-34c637168f65)) + (net 129 "Net-(C121-Pad1)") (pintype "passive") (tstamp d60c4a79-bf0e-4ac4-836a-34c637168f65)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -13110,7 +13361,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 7d65a668-e256-40bc-8e84-4de87ee59c4e) - (at 361.544 -42.664) + (at 156.185 213.241) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -13141,9 +13392,9 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp edf62122-33ef-4ed8-a980-a33863b62d35)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp fc534993-d3d4-4034-aafb-f24977dc3393)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 195 "Net-(D20-Pad2)") (pintype "passive") (tstamp 01367210-2e45-42f6-b9a0-319749867e0d)) + (net 194 "Net-(D20-Pad2)") (pintype "passive") (tstamp 01367210-2e45-42f6-b9a0-319749867e0d)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 155 "/PA 70MHz/VG_5V") (pintype "passive") (tstamp 2d247caa-ffce-4269-9641-089ecb2f5f6e)) + (net 154 "/PA 70MHz/VG_5V") (pintype "passive") (tstamp 2d247caa-ffce-4269-9641-089ecb2f5f6e)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -13153,7 +13404,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 7da4ee90-0685-4e30-9908-33add9edafee) - (at 375.484 -51.494) + (at 170.125 204.411) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -13184,9 +13435,9 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 8444374d-14f9-4bc8-b363-c3b88ff16370)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp afadabce-17b8-43ac-a092-aae34be1e12b)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 139 "Net-(C136-Pad2)") (pintype "passive") (tstamp 65abc001-688f-409a-960f-8d1d1a1c5c00)) + (net 138 "Net-(C136-Pad2)") (pintype "passive") (tstamp 65abc001-688f-409a-960f-8d1d1a1c5c00)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 259 "/PA 70MHz/PA_IN") (pintype "passive") (tstamp 811e1bdd-bc93-4ecc-a4b1-e443e84212c6)) + (net 258 "/PA 70MHz/PA_IN") (pintype "passive") (tstamp 811e1bdd-bc93-4ecc-a4b1-e443e84212c6)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -13196,7 +13447,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 7e343633-36e3-4427-973f-8ed1fa2752f4) - (at 26.49 -12.73) + (at -106.52 87.376) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM188R71H104KA93D") @@ -13240,7 +13491,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 7ed52c81-07b0-4394-8b83-486d7659f566) - (at 232.922 -50.272) + (at 239.649 -14.097) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -13271,9 +13522,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp d5ad3f7e-740d-4c62-a157-29b296a96aa8)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp da1a77e5-ceb6-4c0b-91b8-4ef0d4a3e819)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 123 "Net-(C114-Pad2)") (pintype "passive") (tstamp 43e5c78f-d0de-41b0-bad2-ea589622fae9)) + (net 122 "Net-(C114-Pad2)") (pintype "passive") (tstamp 43e5c78f-d0de-41b0-bad2-ea589622fae9)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 120 "Net-(C111-Pad2)") (pintype "passive") (tstamp 9dc455c5-5f5d-45d7-bc71-c879d5513d54)) + (net 119 "Net-(C111-Pad2)") (pintype "passive") (tstamp 9dc455c5-5f5d-45d7-bc71-c879d5513d54)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -13327,7 +13578,7 @@ (footprint "mpb:large_inductor" (layer "F.Cu") (tedit 5FC0D6CB) (tstamp 7f331744-4a74-462a-a97a-03e2d0e4477e) - (at 298.214 -39.279) + (at 92.855 216.626) (property "Need_order" "0") (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") @@ -13348,18 +13599,18 @@ (fp_arc (start -1.4 3) (mid -2.4 2) (end -1.4 1) (layer "F.SilkS") (width 0.15) (tstamp 3f211e35-4418-4d3d-97c6-fb63832ef556)) (fp_arc (start -1.4 1) (mid -2.4 0) (end -1.4 -1) (layer "F.SilkS") (width 0.15) (tstamp 96f03a9b-6384-428b-a922-5531c4133424)) (pad "1" smd rect locked (at 0 -4.5) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") - (net 216 "Net-(FB3-Pad1)") (pintype "passive") (tstamp 20884eb9-88c9-4167-9de7-d18bda5e9d2c)) + (net 215 "Net-(FB3-Pad1)") (pintype "passive") (tstamp 20884eb9-88c9-4167-9de7-d18bda5e9d2c)) (pad "1" smd rect locked (at 0 -6) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 216 "Net-(FB3-Pad1)") (pintype "passive") (tstamp cec230b3-398f-4c2b-8459-0b41cf03f937)) + (net 215 "Net-(FB3-Pad1)") (pintype "passive") (tstamp cec230b3-398f-4c2b-8459-0b41cf03f937)) (pad "2" smd rect locked (at 0 4.5) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") - (net 153 "Net-(C149-Pad1)") (pintype "passive") (tstamp 25b513b4-501b-496f-b7ee-46b4f7e15caf)) + (net 152 "Net-(C149-Pad1)") (pintype "passive") (tstamp 25b513b4-501b-496f-b7ee-46b4f7e15caf)) (pad "2" smd rect locked (at 0 6) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 153 "Net-(C149-Pad1)") (pintype "passive") (tstamp 2fd11895-4fc2-449a-a130-e01cfcb1f3ec)) + (net 152 "Net-(C149-Pad1)") (pintype "passive") (tstamp 2fd11895-4fc2-449a-a130-e01cfcb1f3ec)) ) (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 7fb2a504-ef45-4fe4-9925-c43535713277) - (at 194.862 -11.262) + (at 217.678 -6.096 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -13368,15 +13619,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/0e1aac74-64c0-406d-a8e5-f122642c9123") (attr smd) - (fp_text reference "C101" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "C101" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp bd7cf1e1-0f99-4534-9cc2-311a0f4258f0) ) - (fp_text value "36pF" (at 0 1.43) (layer "F.Fab") + (fp_text value "36pF" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 8daa0769-9ac5-4df2-ac2e-5ff26f051b10) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp c8284c48-2f8e-4a2e-a47a-a1245ec1a956) ) @@ -13390,10 +13641,10 @@ (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 19daf269-52bb-4b81-a309-19732bbf4a91)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 48ca4fc8-6c26-44df-8514-d0dcaa74e7a7)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 61f1d42d-e973-43a7-815d-78bf3ca91516)) - (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 8b3da7ee-17c4-4488-ad28-254e642cbcd9)) - (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 111 "Net-(C101-Pad2)") (pintype "passive") (tstamp 329a83b7-61bd-4501-aa60-d337db83fa1b)) + (pad "2" smd roundrect (at 0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 110 "Net-(C101-Pad2)") (pintype "passive") (tstamp 329a83b7-61bd-4501-aa60-d337db83fa1b)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -13436,7 +13687,7 @@ (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 71 "Net-(C60-Pad2)") (pintype "passive") (tstamp 279afd1f-de6c-456f-bc09-dc4ff5d3b192)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 186 "Net-(D15-Pad2)") (pintype "passive") (tstamp 8f3b8856-68af-4900-a49f-8b4c1357fc93)) + (net 185 "Net-(D15-Pad2)") (pintype "passive") (tstamp 8f3b8856-68af-4900-a49f-8b4c1357fc93)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -13477,9 +13728,9 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp a90eedab-3dce-49b0-87b3-9bee9db3a590)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp d00824fa-79d5-4dcd-a2c5-298bf2822471)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 279 "/Control on separate board/USB_DM") (pintype "passive") (tstamp 2b978ec8-2005-4682-8432-cfd2d05a1871)) + (net 278 "/Control on separate board/USB_DM") (pintype "passive") (tstamp 2b978ec8-2005-4682-8432-cfd2d05a1871)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 351 "Net-(R179-Pad2)") (pintype "passive") (tstamp 84f5c193-1090-4ed5-91b5-4ab7b616d804)) + (net 350 "Net-(R179-Pad2)") (pintype "passive") (tstamp 84f5c193-1090-4ed5-91b5-4ab7b616d804)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -13533,7 +13784,7 @@ (footprint "mpb:four_4mm_pads" (layer "F.Cu") (tedit 5FB8F772) (tstamp 815360d7-4e53-4029-8b47-f7043bfef474) - (at 307.739 -54.279) + (at 102.38 201.626) (property "Need_order" "0") (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") @@ -13554,18 +13805,18 @@ (fp_line (start -7.75 -5.75) (end -7.75 -1.75) (layer "F.SilkS") (width 0.15) (tstamp df4cebc6-ea05-4789-a2ee-eaea3134693f)) (fp_line (start -11.75 -1.75) (end -7.75 -1.75) (layer "F.SilkS") (width 0.15) (tstamp ef296ddc-b739-4b0a-91e5-1485791597f6)) (pad "1" smd rect locked (at -10 -4) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 150 "Net-(C147-Pad2)") (pinfunction "AA") (pintype "passive") (tstamp 064bee68-0f00-4ead-b4b7-7410f10caac8)) + (net 149 "Net-(C147-Pad2)") (pinfunction "AA") (pintype "passive") (tstamp 064bee68-0f00-4ead-b4b7-7410f10caac8)) (pad "2" smd rect locked (at -10 4) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 152 "Net-(C148-Pad2)") (pinfunction "AB") (pintype "passive") (tstamp c23aca8b-7be3-4241-947b-8b215b0da494)) + (net 151 "Net-(C148-Pad2)") (pinfunction "AB") (pintype "passive") (tstamp c23aca8b-7be3-4241-947b-8b215b0da494)) (pad "3" smd rect locked (at 10 4) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "SA") (pintype "passive") (tstamp 644e8258-cbaf-4308-a231-5c496f31429f)) (pad "4" smd rect locked (at 10 -4) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 156 "Net-(C155-Pad2)") (pinfunction "SB") (pintype "passive") (tstamp 854f93a9-e3a0-44b0-93b7-331567d75b6d)) + (net 155 "Net-(C155-Pad2)") (pinfunction "SB") (pintype "passive") (tstamp 854f93a9-e3a0-44b0-93b7-331567d75b6d)) ) (footprint "Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 8190d215-834e-471e-8076-9e11779bf666) - (at 190.712 -15.282) + (at 151.892 -26.162 -90) (descr "Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW18AS10NJ00D") @@ -13574,15 +13825,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/7678bfcd-dd1f-4899-a483-68aa46bc1a02") (attr smd) - (fp_text reference "L28" (at 0 -1.65) (layer "F.SilkS") + (fp_text reference "L28" (at 0 -1.65 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp dba6f550-e6a5-4b35-8775-c4bf93f7635e) ) - (fp_text value "10nH" (at 0 1.65) (layer "F.Fab") + (fp_text value "10nH" (at 0 1.65 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp c8c3e7f6-2880-4e67-a98c-c91c87d4a3a2) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.08))) (tstamp ac922e1a-fc0c-45ce-b4bb-e6bbcf9ce310) ) @@ -13596,10 +13847,10 @@ (fp_line (start 1 0.6) (end -1 0.6) (layer "F.Fab") (width 0.1) (tstamp 41baa5dc-1d2a-4dd1-a1eb-625abcfb3be7)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer "F.Fab") (width 0.1) (tstamp 94ac0859-1848-4d58-a99b-5b5ae4099fd2)) (fp_line (start 1 -0.6) (end 1 0.6) (layer "F.Fab") (width 0.1) (tstamp e08bfbdf-b372-439a-a50d-4c151da54844)) - (pad "1" smd roundrect (at -1.025 0) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 110 "Net-(C100-Pad2)") (pinfunction "1") (pintype "passive") (tstamp b0630ccd-d460-47f6-b601-34cb3ff09dab)) - (pad "2" smd roundrect (at 1.025 0) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 104 "Net-(C100-Pad1)") (pinfunction "2") (pintype "passive") (tstamp 007d2ea0-753f-457f-b0a6-cb8eb553052c)) + (pad "1" smd roundrect (at -1.025 0 270) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) + (net 109 "Net-(C100-Pad2)") (pinfunction "1") (pintype "passive") (tstamp b0630ccd-d460-47f6-b601-34cb3ff09dab)) + (pad "2" smd roundrect (at 1.025 0 270) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) + (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 007d2ea0-753f-457f-b0a6-cb8eb553052c)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -13609,7 +13860,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp 821a604c-d650-4a61-994e-9e80f17d799d) - (at 103 147) + (at 255.177 146.987) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -13690,19 +13941,19 @@ (fp_line (start -4.875 -1.6) (end -4.375 -0.892893) (layer "F.Fab") (width 0.1) (tstamp d681ee73-76a7-4db4-a53b-a115c1a27489)) (fp_line (start -5.875 2.6) (end 5.875 2.6) (layer "F.Fab") (width 0.1) (tstamp d914b7f9-2c53-4f87-87c5-61aede19be10)) (pad "1" smd roundrect (at -4.375 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 229 "Net-(J7-Pad1)") (pinfunction "Pin_1") (pintype "passive") (tstamp c34fa268-36d8-470a-9e41-efe58bf3d4f6)) + (net 228 "Net-(J7-Pad1)") (pinfunction "Pin_1") (pintype "passive") (tstamp c34fa268-36d8-470a-9e41-efe58bf3d4f6)) (pad "2" smd roundrect (at -3.125 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 4 "Net-(C3-Pad1)") (pinfunction "Pin_2") (pintype "passive") (tstamp c8802250-193f-4b9a-87a9-8b4c09ea38cd)) (pad "3" smd roundrect (at -1.875 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 3 "Net-(C2-Pad1)") (pinfunction "Pin_3") (pintype "passive") (tstamp 961f9603-1738-4be1-81b9-6706a3784c77)) (pad "4" smd roundrect (at -0.625 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 230 "unconnected-(J7-Pad4)") (pinfunction "Pin_4") (pintype "passive") (tstamp 8d0a7fd8-7463-4871-bf2b-b0c413146668)) + (net 229 "unconnected-(J7-Pad4)") (pinfunction "Pin_4") (pintype "passive") (tstamp 8d0a7fd8-7463-4871-bf2b-b0c413146668)) (pad "5" smd roundrect (at 0.625 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "Pin_5") (pintype "passive") (tstamp eac0f2fa-5b4d-423b-9f02-f56e28c2355b)) (pad "6" smd roundrect (at 1.875 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 46 "/Baseband/SPKR_OUT") (pinfunction "Pin_6") (pintype "passive") (tstamp 1b5f8cb6-0d0f-42d0-969b-27717d8cf924)) (pad "7" smd roundrect (at 3.125 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 231 "/Baseband/SPKR_DET") (pinfunction "Pin_7") (pintype "passive") (tstamp a13c0e72-d560-4a5b-a440-bcd0a382655b)) + (net 230 "/Baseband/SPKR_DET") (pinfunction "Pin_7") (pintype "passive") (tstamp a13c0e72-d560-4a5b-a440-bcd0a382655b)) (pad "8" smd roundrect (at 4.375 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "Pin_8") (pintype "passive") (tstamp 6c0b89a3-9456-47f5-ab47-9b798c51a2ca)) (pad "MP" smd roundrect (at 6.925 0.5 270) (size 2.1 3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.119048) (tstamp 26eff369-9e93-45b5-bc12-aabe898daac8)) @@ -13757,6 +14008,50 @@ ) ) + (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEF0) (tstamp 827b08a7-3aed-447c-bd75-cc3d1dbc6865) + (at 219.964 -6.604 -90) + (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") + (tags "inductor handsolder") + (property "MPN" "LQW2UASR56") + (property "Need_order" "1") + (property "Sheetfile" "frontend_70.kicad_sch") + (property "Sheetname" "70MHz VHF Frontend") + (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/f143c8f8-7cba-4a3a-9356-216972257269") + (attr smd) + (fp_text reference "L29" (at 0 -2.05 90) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 7d99cbb2-db8e-487a-bab5-906d751dc362) + ) + (fp_text value "56nH" (at 0 2.05 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 9d811b14-1446-41f2-b4de-0ce93e16b39d) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.62 0.62) (thickness 0.09))) + (tstamp 7f0f630e-12be-41f7-ade1-627ae8410dbd) + ) + (fp_line (start -0.261252 -1.11) (end 0.261252 -1.11) (layer "F.SilkS") (width 0.12) (tstamp aa459854-dbdb-4ef4-8167-86282d3b26ee)) + (fp_line (start -0.261252 1.11) (end 0.261252 1.11) (layer "F.SilkS") (width 0.12) (tstamp cd787e8f-6fd0-4dd4-aec4-3c607db50d8b)) + (fp_line (start 2.12 1.35) (end -2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp 09c05cc8-a392-4dbc-b8f4-f0f9c98344cf)) + (fp_line (start 2.12 -1.35) (end 2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp 1bb2e70f-47b3-463a-9d34-a603e59dfa99)) + (fp_line (start -2.12 1.35) (end -2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp a93cf4b6-4e7d-468f-95b4-7b6148fd7a4b)) + (fp_line (start -2.12 -1.35) (end 2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp f06da7f0-32e9-4e5e-b271-757fea9755d6)) + (fp_line (start 1.25 -1) (end 1.25 1) (layer "F.Fab") (width 0.1) (tstamp 1682e86f-2885-4099-8e76-c91fa495ec88)) + (fp_line (start 1.25 1) (end -1.25 1) (layer "F.Fab") (width 0.1) (tstamp 23736026-3e27-4372-976d-9b4c53af9b42)) + (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 54c30186-0d61-493c-bd0d-ca343d0f570f)) + (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 7121f5f6-e870-47c8-ab19-70fe33218f7b)) + (pad "1" smd roundrect (at -1.1625 0 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 110 "Net-(C101-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 258c4f71-6e48-446b-b05b-dd134e5df9f5)) + (pad "2" smd roundrect (at 1.1625 0 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 373 "Net-(L29-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 0d1d07d3-fea9-4820-a9ef-4aeb4936776d)) + (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 82be05c0-3c80-471c-a164-cd76d8778787) (at 33.02 74.422 90) @@ -13833,7 +14128,7 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c12c12b3-8a71-4628-94c6-f40b25e46116)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp f43e5cfb-b111-443d-8ca2-83fa127291e2)) (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 290 "Net-(L19-Pad1)") (pintype "passive") (tstamp ac504c8d-be32-4c80-9a7a-45498fbc92fe)) + (net 289 "Net-(L19-Pad1)") (pintype "passive") (tstamp ac504c8d-be32-4c80-9a7a-45498fbc92fe)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 99 "Net-(C83-Pad2)") (pintype "passive") (tstamp 8a6cd8d4-bf8e-409b-af04-04b9da8c257d)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -13889,9 +14184,9 @@ (pad "1" thru_hole rect (at 0 0) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "1") (pintype "passive") (tstamp 3ee3bc99-ceda-43a0-bed0-a460fedb272f)) (pad "2" thru_hole circle (at 0 2.5) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask) - (net 350 "Net-(R178-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 3e8594a6-92b8-4f80-8108-73af0d273b8a)) + (net 349 "Net-(R178-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 3e8594a6-92b8-4f80-8108-73af0d273b8a)) (pad "3" thru_hole circle (at 0 5) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask) - (net 171 "/Control on separate board/5V") (pinfunction "3") (pintype "passive") (tstamp 023ee2d4-bd4e-47f7-9687-58b94baf6233)) + (net 170 "/Control on separate board/5V") (pinfunction "3") (pintype "passive") (tstamp 023ee2d4-bd4e-47f7-9687-58b94baf6233)) (pad "MP" thru_hole roundrect (at 7.5 7.25) (size 2 3) (drill oval 1.1 1.8) (layers *.Cu *.Mask) (roundrect_rratio 0.25) (tstamp 153f1ac3-4f89-4410-9a03-9090f430701e)) (pad "MP" thru_hole roundrect (at 7.5 -2.25) (size 2 3) (drill oval 1.1 1.8) (layers *.Cu *.Mask) (roundrect_rratio 0.25) (tstamp c47e37a9-f1a4-49c0-8428-71f76cf3be47)) (zone (net 0) (net_name "") (layer "F.Cu") (tstamp 8999937d-154e-4950-8bcf-a75b664d80a6) (name "Copper Keep Out") (hatch full 0.508) @@ -13962,9 +14257,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 9bfbaa56-c582-484d-834c-ae9625da7762)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp bc5e7735-c879-4966-b5d6-6ca558ca24ce)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 263c4cd1-7271-4c3e-96a4-cc071a63b792)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 263c4cd1-7271-4c3e-96a4-cc071a63b792)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 198 "Net-(D23-Pad2)") (pintype "passive") (tstamp 3346ee85-4711-428e-8a8d-e83fd6c96bae)) + (net 197 "Net-(D23-Pad2)") (pintype "passive") (tstamp 3346ee85-4711-428e-8a8d-e83fd6c96bae)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14014,9 +14309,9 @@ (fp_line (start 0.25 0) (end 0.75 0) (layer "F.Fab") (width 0.1) (tstamp f37bd29a-9f4f-4858-ae56-78226f74a695)) (fp_line (start 1.4 0.9) (end -1.4 0.9) (layer "F.Fab") (width 0.1) (tstamp fc7f7705-1909-44f8-9711-d76cf11c110b)) (pad "1" smd rect (at -1.4 0 270) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") - (net 184 "Net-(D13-Pad2)") (pinfunction "K") (pintype "passive") (tstamp c555bc79-2d3c-439a-bebb-cc024b50a2dd)) + (net 183 "Net-(D13-Pad2)") (pinfunction "K") (pintype "passive") (tstamp c555bc79-2d3c-439a-bebb-cc024b50a2dd)) (pad "2" smd rect (at 1.4 0 270) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") - (net 185 "Net-(D14-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 46651946-fa94-408c-bee6-2adea0c027e8)) + (net 184 "Net-(D14-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 46651946-fa94-408c-bee6-2adea0c027e8)) (model "${KICAD6_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-123F.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14069,7 +14364,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 8579a26a-2f11-4b31-af0e-df90f0c52f0c) - (at 209.712 -26.922) + (at 247.396 -8.509) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -14101,9 +14396,9 @@ (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 99d810e4-3e08-411c-85c3-8ffcab9266cf)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp a25be348-8254-4ab6-bb20-e1a6c4a9c3b8)) (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 128 "Net-(C120-Pad1)") (pintype "passive") (tstamp 87003f9a-6e35-44d4-b327-0595f151cf86)) + (net 127 "Net-(C120-Pad1)") (pintype "passive") (tstamp 87003f9a-6e35-44d4-b327-0595f151cf86)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 129 "Net-(C120-Pad2)") (pintype "passive") (tstamp 7b19606f-0f96-4d77-8837-942c50c93467)) + (net 128 "Net-(C120-Pad2)") (pintype "passive") (tstamp 7b19606f-0f96-4d77-8837-942c50c93467)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14113,7 +14408,7 @@ (footprint "Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 857f099d-f804-46b5-8cc3-21000f94ca18) - (at 214.402 -41.862) + (at 133.604 -26.1835 -90) (descr "Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW18AS10NJ00D") @@ -14122,15 +14417,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/f22abfe3-1cda-4ff3-80aa-2c917c6563fb") (attr smd) - (fp_text reference "L20" (at 0 -1.65) (layer "F.SilkS") + (fp_text reference "L20" (at 0 -1.65 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp eaea0fdd-a040-4d09-9899-374dd7feef4c) ) - (fp_text value "10nH" (at 0 1.65) (layer "F.Fab") + (fp_text value "10nH" (at 0 1.65 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 3d520fe4-0b46-453d-aba3-447c726d8492) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.08))) (tstamp c40d2d34-29d2-4cc3-a796-0b9c2487fbf3) ) @@ -14144,10 +14439,10 @@ (fp_line (start -1 0.6) (end -1 -0.6) (layer "F.Fab") (width 0.1) (tstamp bcfe39d5-0996-4874-8ac8-cdda24d7a5ab)) (fp_line (start 1 0.6) (end -1 0.6) (layer "F.Fab") (width 0.1) (tstamp c1790836-893d-468f-addd-0af9cb25fc09)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer "F.Fab") (width 0.1) (tstamp d3cd4fa0-d9bb-441a-bfc5-f4ff56520626)) - (pad "1" smd roundrect (at -1.025 0) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 105 "/70MHz VHF Frontend/VHF_RX") (pinfunction "1") (pintype "passive") (tstamp 8114e557-1454-46d1-b52c-e6211684f676)) - (pad "2" smd roundrect (at 1.025 0) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 104 "Net-(C100-Pad1)") (pinfunction "2") (pintype "passive") (tstamp 8d1bf64c-fa11-4006-b6e7-a178daeef6ba)) + (pad "1" smd roundrect (at -1.025 0 270) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) + (net 104 "/70MHz VHF Frontend/VHF_RX") (pinfunction "1") (pintype "passive") (tstamp 8114e557-1454-46d1-b52c-e6211684f676)) + (pad "2" smd roundrect (at 1.025 0 270) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) + (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 8d1bf64c-fa11-4006-b6e7-a178daeef6ba)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14192,9 +14487,9 @@ (fp_line (start -0.175 -1.1) (end -0.675 -0.6) (layer "F.Fab") (width 0.1) (tstamp 88d36d06-f9c4-4c7d-afa4-5f39d929bf51)) (fp_line (start 0.675 -1.1) (end 0.675 1.1) (layer "F.Fab") (width 0.1) (tstamp a4c4bbc8-b51a-43ac-b773-80d98cd9fce7)) (pad "1" smd rect (at -1.33 -0.65 270) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 175 "Net-(D6-Pad1)") (pintype "passive") (tstamp 5877665c-161e-402d-8d42-4478ff92ec68)) + (net 174 "Net-(D6-Pad1)") (pintype "passive") (tstamp 5877665c-161e-402d-8d42-4478ff92ec68)) (pad "2" smd rect (at -1.33 0.65 270) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 176 "Net-(D6-Pad2)") (pintype "passive") (tstamp b0cbec48-071b-435b-a3ff-df01a9a858b2)) + (net 175 "Net-(D6-Pad2)") (pintype "passive") (tstamp b0cbec48-071b-435b-a3ff-df01a9a858b2)) (pad "3" smd rect (at 1.33 0 270) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") (net 52 "Net-(C46-Pad2)") (pintype "passive") (tstamp 77bed380-9678-4fa0-b3ce-8090723a367a)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-323_SC-70.wrl" @@ -14239,7 +14534,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 724ab8ba-6613-4430-94ac-4d8cc4ebffb7)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 229 "Net-(J7-Pad1)") (pintype "passive") (tstamp 71d3f289-35b0-4c5a-a641-cf8ff23f819d)) + (net 228 "Net-(J7-Pad1)") (pintype "passive") (tstamp 71d3f289-35b0-4c5a-a641-cf8ff23f819d)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14249,7 +14544,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 8761f77c-e35a-400d-be28-cd5201f4015b) - (at 361.964 -48.374) + (at 156.605 207.531) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM31C5C1H104JA01L") @@ -14281,9 +14576,9 @@ (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 509733f7-1d59-4e53-baf9-e6a47084829f)) (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp e8ea711b-2100-42e5-89d7-c71b0f742154)) (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 149 "Net-(C147-Pad1)") (pintype "passive") (tstamp 4c499bc8-4a81-4101-8136-4f75466c956a)) + (net 148 "Net-(C147-Pad1)") (pintype "passive") (tstamp 4c499bc8-4a81-4101-8136-4f75466c956a)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 150 "Net-(C147-Pad2)") (pintype "passive") (tstamp 13b5d33e-8e37-4a68-939e-6477d754084b)) + (net 149 "Net-(C147-Pad2)") (pintype "passive") (tstamp 13b5d33e-8e37-4a68-939e-6477d754084b)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14324,9 +14619,9 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 49836556-84de-472a-be08-01d33098b4fb)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp e93135c2-8dd8-4cdb-9cdf-a3cf7ea0d44c)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 339 "Net-(R161-Pad2)") (pintype "passive") (tstamp 3c6c8b4e-6740-4ad1-90e0-f8c2ebce172d)) + (net 338 "Net-(R161-Pad2)") (pintype "passive") (tstamp 3c6c8b4e-6740-4ad1-90e0-f8c2ebce172d)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp feb62051-25da-4fa4-a645-924412ff1b67)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp feb62051-25da-4fa4-a645-924412ff1b67)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14336,7 +14631,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 884408cf-1b95-42c8-8e59-ec38a475efb6) - (at 190.982 -21.492) + (at 248.158 -5.6935 90) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A121GXXPBC") @@ -14345,15 +14640,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/71d70a47-0192-42f4-a3d2-e79668e0ba24") (attr smd) - (fp_text reference "C123" (at 0 -1.68) (layer "F.SilkS") + (fp_text reference "C123" (at 0 -1.68 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 00a5ea41-ba85-4821-8a97-b3fc9f02b825) ) - (fp_text value "120pF" (at 0 1.68) (layer "F.Fab") + (fp_text value "120pF" (at 0 1.68 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 1d348d93-356b-4fde-a835-e0d73f23fd02) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.08))) (tstamp fed59844-d900-4f8e-af37-399efdd57e29) ) @@ -14367,10 +14662,10 @@ (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp de96f37b-ebec-4eb3-9718-27b6c0d683d6)) (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp e50251f4-2e23-4fc0-b8cc-7bc5e9c366e3)) (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp facec4e9-7b03-4444-ad62-fdd0ce6469b1)) - (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (pad "1" smd roundrect (at -1.0375 0 90) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp fe9d9d61-c606-4662-814e-2d7dbf5396e6)) - (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 129 "Net-(C120-Pad2)") (pintype "passive") (tstamp e53279b3-604d-4caa-ab07-679d86236c42)) + (pad "2" smd roundrect (at 1.0375 0 90) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 128 "Net-(C120-Pad2)") (pintype "passive") (tstamp e53279b3-604d-4caa-ab07-679d86236c42)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14442,7 +14737,7 @@ (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp b87e6a1e-9b82-4852-9abb-6c1ceb78e4cb)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 168 "Net-(C173-Pad2)") (pintype "passive") (tstamp 849270c9-cf98-4c28-895b-1526aba1c3db)) + (net 167 "Net-(C173-Pad2)") (pintype "passive") (tstamp 849270c9-cf98-4c28-895b-1526aba1c3db)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14483,9 +14778,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp b44b3b42-aeac-4735-a42a-d3a4c5c37176)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp b4df763e-61c7-44be-95b9-6152973dffee)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 286 "Net-(J36-Pad4)") (pintype "passive") (tstamp 6b475309-4ada-49d2-9355-39c370cc28ba)) + (net 285 "Net-(J36-Pad4)") (pintype "passive") (tstamp 6b475309-4ada-49d2-9355-39c370cc28ba)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 354 "/Control on separate board/BOOT1") (pintype "passive") (tstamp 11bf9e6b-52c6-4290-bc88-0de8cf981747)) + (net 353 "/Control on separate board/BOOT1") (pintype "passive") (tstamp 11bf9e6b-52c6-4290-bc88-0de8cf981747)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14495,7 +14790,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 8b1b4a6c-6100-4691-999e-0fa7b10d13fe) - (at 374.064 -59.274) + (at 168.705 196.631) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM31C5C1H104JA01L") @@ -14527,9 +14822,9 @@ (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp a5ce6528-3830-4f54-9531-1a3c31162026)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp b70054d9-f827-40c6-8e8a-ff188f0b4401)) (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 151 "Net-(C148-Pad1)") (pintype "passive") (tstamp cf2f4091-2cb8-49fa-9921-bdc119efe552)) + (net 150 "Net-(C148-Pad1)") (pintype "passive") (tstamp cf2f4091-2cb8-49fa-9921-bdc119efe552)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 152 "Net-(C148-Pad2)") (pintype "passive") (tstamp 99e10a5d-6dff-4224-9780-d306dbb84fff)) + (net 151 "Net-(C148-Pad2)") (pintype "passive") (tstamp 99e10a5d-6dff-4224-9780-d306dbb84fff)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14587,13 +14882,13 @@ (fp_line (start 3.75 3.3875) (end 3.75 -1.6125) (layer "F.Fab") (width 0.1) (tstamp a68b91fb-9a1b-4819-967f-4f7817665a5d)) (fp_line (start -3.75 3.389204) (end 3.75 3.389204) (layer "F.Fab") (width 0.1) (tstamp e718059b-4aa5-4e29-b0b8-9e879c06ef99)) (pad "1" smd rect (at -1.3 -1.4625) (size 0.4 1.35) (layers "F.Cu" "F.Paste" "F.Mask") - (net 278 "unconnected-(J34-Pad1)") (pinfunction "VBUS") (pintype "power_out+no_connect") (tstamp b78e1220-4315-4908-841a-efc36478abeb)) + (net 277 "unconnected-(J34-Pad1)") (pinfunction "VBUS") (pintype "power_out+no_connect") (tstamp b78e1220-4315-4908-841a-efc36478abeb)) (pad "2" smd rect (at -0.65 -1.4625) (size 0.4 1.35) (layers "F.Cu" "F.Paste" "F.Mask") - (net 279 "/Control on separate board/USB_DM") (pinfunction "D-") (pintype "bidirectional") (tstamp 42d3be3e-6c4f-44ed-a346-ad5cfff92b6c)) + (net 278 "/Control on separate board/USB_DM") (pinfunction "D-") (pintype "bidirectional") (tstamp 42d3be3e-6c4f-44ed-a346-ad5cfff92b6c)) (pad "3" smd rect (at 0 -1.4625) (size 0.4 1.35) (layers "F.Cu" "F.Paste" "F.Mask") - (net 280 "/Control on separate board/USB_DP") (pinfunction "D+") (pintype "bidirectional") (tstamp a38a5420-6651-4d44-9b52-c07d60efbf5f)) + (net 279 "/Control on separate board/USB_DP") (pinfunction "D+") (pintype "bidirectional") (tstamp a38a5420-6651-4d44-9b52-c07d60efbf5f)) (pad "4" smd rect (at 0.65 -1.4625) (size 0.4 1.35) (layers "F.Cu" "F.Paste" "F.Mask") - (net 281 "Net-(J34-Pad4)") (pinfunction "ID") (pintype "passive") (tstamp e62c803a-79c1-4425-a887-e86d35cf295f)) + (net 280 "Net-(J34-Pad4)") (pinfunction "ID") (pintype "passive") (tstamp e62c803a-79c1-4425-a887-e86d35cf295f)) (pad "5" smd rect (at 1.3 -1.4625) (size 0.4 1.35) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "GND") (pintype "power_out") (tstamp 2eae70e1-0eb3-46d8-aeb1-1475e8c7a6be)) (pad "6" smd rect (at 2.9 1.2375) (size 1.2 1.9) (layers "F.Cu" "F.Mask") @@ -14695,7 +14990,7 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e3935fbe-6fcb-4fff-aa6f-5bd74fa54bd6)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp ea95eef3-dea0-4b61-977b-7525d775e236)) (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 306 "Net-(Q13-Pad1)") (pintype "passive") (tstamp 9875afb0-6eb7-4f8e-9cbd-0818e99d572f)) + (net 305 "Net-(Q13-Pad1)") (pintype "passive") (tstamp 9875afb0-6eb7-4f8e-9cbd-0818e99d572f)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 6b43a05d-515e-4c75-8555-84a1ebc60cac)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -14707,7 +15002,7 @@ (footprint "Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical" (layer "F.Cu") (tedit 59FED5CC) (tstamp 8d3ee56c-4d57-4571-82b2-0795dbb4108f) - (at 153.035 39.37) + (at 157.615 39.314) (descr "Through hole straight pin header, 1x08, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x08 2.54mm single row") (property "MPN" "SSW-108-01-G-S") @@ -14744,21 +15039,21 @@ (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp b316b064-1cf8-4d41-8530-5be56943dfda)) (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp b8327c84-6667-46ba-8757-058e4fc065d9)) (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 125 "/70MHz VHF Frontend/12V") (pinfunction "Pin_1") (pintype "passive") (tstamp 51c90906-e493-4561-8c1a-d282b66eeb93)) + (net 124 "/70MHz VHF Frontend/12V") (pinfunction "Pin_1") (pintype "passive") (tstamp 51c90906-e493-4561-8c1a-d282b66eeb93)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_2") (pintype "passive") (tstamp 4b2253a2-d348-405d-8394-5ddc01c4bd0d)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 136 "/70MHz VHF Frontend/RX_TO_MIX") (pinfunction "Pin_3") (pintype "passive") (tstamp 4c03f19d-c254-4002-8564-981bbd9702f5)) + (net 135 "/70MHz VHF Frontend/RX_TO_MIX") (pinfunction "Pin_3") (pintype "passive") (tstamp 4c03f19d-c254-4002-8564-981bbd9702f5)) (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_4") (pintype "passive") (tstamp 6899fd93-fefe-4b15-a019-e47d135dadde)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 107 "/70MHz VHF Frontend/TX_FROM_MIX") (pinfunction "Pin_5") (pintype "passive") (tstamp 6eda77d0-0b79-4f45-bedf-33773659b004)) + (net 106 "/70MHz VHF Frontend/TX_FROM_MIX") (pinfunction "Pin_5") (pintype "passive") (tstamp 6eda77d0-0b79-4f45-bedf-33773659b004)) (pad "6" thru_hole oval (at 0 12.7) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_6") (pintype "passive") (tstamp ceb5ef88-abea-405e-891e-e2b74c3f9a6e)) (pad "7" thru_hole oval (at 0 15.24) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 257 "/70MHz VHF Frontend/EN_VRX") (pinfunction "Pin_7") (pintype "passive") (tstamp ffb4d1bc-237b-402c-8072-0356532739ca)) + (net 256 "/70MHz VHF Frontend/EN_VRX") (pinfunction "Pin_7") (pintype "passive") (tstamp ffb4d1bc-237b-402c-8072-0356532739ca)) (pad "8" thru_hole oval (at 0 17.78) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 258 "/70MHz VHF Frontend/EN_VTX") (pinfunction "Pin_8") (pintype "passive") (tstamp 53c516ca-75d5-40f0-962e-f9abde0bc5dc)) + (net 257 "/70MHz VHF Frontend/EN_VTX") (pinfunction "Pin_8") (pintype "passive") (tstamp 53c516ca-75d5-40f0-962e-f9abde0bc5dc)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x08_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14768,7 +15063,7 @@ (footprint "Potentiometer_SMD:Potentiometer_Bourns_3214W_Vertical" (layer "F.Cu") (tedit 5A3D7171) (tstamp 8d778e1a-fd7a-41e6-9e1d-452648c20ead) - (at 345.394 -40.144) + (at 140.035 215.761) (descr "Potentiometer, vertical, Bourns 3214W, https://www.bourns.com/docs/Product-Datasheets/3214.pdf") (tags "Potentiometer vertical Bourns 3214W") (property "MPN" "Bourns 3214W-1-102E") @@ -14808,9 +15103,9 @@ (fp_line (start 2.4 1.75) (end 2.4 -1.75) (layer "F.Fab") (width 0.1) (tstamp ef96e88a-24f4-405c-913c-5ac68937a66c)) (fp_circle (center -1.2 0.65) (end -0.45 0.65) (layer "F.Fab") (width 0.1) (fill none) (tstamp 0a1202f9-a15e-49b9-853e-0578d2b1497c)) (pad "1" smd rect (at 1.25 -1.45) (size 1.3 1.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 155 "/PA 70MHz/VG_5V") (pinfunction "1") (pintype "passive") (tstamp 3db39677-9c4f-43dc-a709-e32f4f75fc76)) + (net 154 "/PA 70MHz/VG_5V") (pinfunction "1") (pintype "passive") (tstamp 3db39677-9c4f-43dc-a709-e32f4f75fc76)) (pad "2" smd rect (at 0 1.45) (size 2 1.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 336 "Net-(R157-Pad1)") (pinfunction "2") (pintype "passive") (tstamp ad351248-4562-4cc9-a32c-ccfdb9f5eaa7)) + (net 335 "Net-(R157-Pad1)") (pinfunction "2") (pintype "passive") (tstamp ad351248-4562-4cc9-a32c-ccfdb9f5eaa7)) (pad "3" smd rect (at -1.25 -1.45) (size 1.3 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "3") (pintype "passive") (tstamp 1f239b46-7a79-46aa-8508-7c04c217f16f)) (model "${KICAD6_3DMODEL_DIR}/Potentiometer_SMD.3dshapes/Potentiometer_Bourns_3214W_Vertical.wrl" @@ -14898,15 +15193,15 @@ (fp_line (start -0.3125 -1) (end -0.625 -0.6875) (layer "F.Fab") (width 0.1) (tstamp c5e161b1-9f77-4f5e-a7d7-79e040e3a608)) (fp_line (start -0.3125 -1) (end 0.625 -1) (layer "F.Fab") (width 0.1) (tstamp de459802-fc24-411d-8776-6cec00cc4985)) (pad "1" smd rect (at -1.59 -1.27 270) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 308 "Net-(Q14-Pad3)") (pinfunction "PR1") (pintype "passive") (clearance 0.2) (tstamp 1c085623-6884-4d5b-a15c-1592f8d00529)) + (net 307 "Net-(Q14-Pad3)") (pinfunction "PR1") (pintype "passive") (clearance 0.2) (tstamp 1c085623-6884-4d5b-a15c-1592f8d00529)) (pad "2" smd rect (at -1.59 0 270) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 365 "unconnected-(T4-Pad2)") (pinfunction "PM") (pintype "passive+no_connect") (clearance 0.2) (tstamp 2835ee12-f853-4f4b-bdaf-2bdfd6feebbc)) + (net 364 "unconnected-(T4-Pad2)") (pinfunction "PM") (pintype "passive+no_connect") (clearance 0.2) (tstamp 2835ee12-f853-4f4b-bdaf-2bdfd6feebbc)) (pad "3" smd rect (at -1.59 1.27 270) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 74 "Net-(C63-Pad2)") (pinfunction "PR2") (pintype "passive") (clearance 0.2) (tstamp aabf43f8-4697-4c9a-a7e9-c4199ef90e1c)) (pad "4" smd rect (at 1.59 1.27 270) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 306 "Net-(Q13-Pad1)") (pinfunction "S1") (pintype "passive") (clearance 0.2) (tstamp e1e187e8-10f5-4950-9bb7-520414ba31b3)) + (net 305 "Net-(Q13-Pad1)") (pinfunction "S1") (pintype "passive") (clearance 0.2) (tstamp e1e187e8-10f5-4950-9bb7-520414ba31b3)) (pad "5" smd rect (at 1.59 0 270) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 304 "Net-(Q11-Pad1)") (pinfunction "S2") (pintype "passive") (clearance 0.2) (tstamp fc070a00-bb76-4ccb-9920-893e1e0a29fb)) + (net 303 "Net-(Q11-Pad1)") (pinfunction "S2") (pintype "passive") (clearance 0.2) (tstamp fc070a00-bb76-4ccb-9920-893e1e0a29fb)) (pad "6" smd rect (at 1.59 -1.27 270) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (clearance 0.2) (tstamp dde5d22f-99bc-4ad2-b02c-73fbc33be523)) (model "${KICAD6_3DMODEL_DIR}/RF_Converter.3dshapes/Balun_Johanson_5400BL15B050E.wrl" @@ -14971,19 +15266,19 @@ (fp_line (start -5.875 -0.6) (end -7.375 -0.6) (layer "F.Fab") (width 0.1) (tstamp e16a6087-4560-48ae-8b6c-124cf76bcf51)) (fp_line (start -7.375 1.6) (end -7.375 2.2) (layer "F.Fab") (width 0.1) (tstamp f2aea69f-0a9d-4755-ad1e-e843a5c12eed)) (pad "1" smd roundrect (at -4.375 -2.4) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 238 "/Control on separate board/S_METER") (pinfunction "Pin_1") (pintype "passive") (tstamp 18863fc6-d859-4895-be2a-12a948b1278e)) + (net 237 "/Control on separate board/S_METER") (pinfunction "Pin_1") (pintype "passive") (tstamp 18863fc6-d859-4895-be2a-12a948b1278e)) (pad "2" smd roundrect (at -3.125 -2.4) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 239 "/Control on separate board/SCL") (pinfunction "Pin_2") (pintype "passive") (tstamp 82fea5be-9e6f-4d56-89b0-856536646ead)) + (net 238 "/Control on separate board/SCL") (pinfunction "Pin_2") (pintype "passive") (tstamp 82fea5be-9e6f-4d56-89b0-856536646ead)) (pad "3" smd roundrect (at -1.875 -2.4) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 240 "/Control on separate board/SDA") (pinfunction "Pin_3") (pintype "passive") (tstamp acc3825f-9306-426f-995e-bcac4721f995)) + (net 239 "/Control on separate board/SDA") (pinfunction "Pin_3") (pintype "passive") (tstamp acc3825f-9306-426f-995e-bcac4721f995)) (pad "4" smd roundrect (at -0.625 -2.4) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 241 "/Control on separate board/MUTE_MICn") (pinfunction "Pin_4") (pintype "passive") (tstamp 5e0f2277-f08e-4510-abc2-ed48e78edc8a)) + (net 240 "/Control on separate board/MUTE_MICn") (pinfunction "Pin_4") (pintype "passive") (tstamp 5e0f2277-f08e-4510-abc2-ed48e78edc8a)) (pad "5" smd roundrect (at 0.625 -2.4) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 242 "/Control on separate board/SPKR_VOL") (pinfunction "Pin_5") (pintype "passive") (tstamp 94024489-0196-47c9-a519-e33f52a0f566)) + (net 241 "/Control on separate board/SPKR_VOL") (pinfunction "Pin_5") (pintype "passive") (tstamp 94024489-0196-47c9-a519-e33f52a0f566)) (pad "6" smd roundrect (at 1.875 -2.4) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 243 "unconnected-(J9-Pad6)") (pinfunction "Pin_6") (pintype "passive") (tstamp 576dd4d0-7e3a-4e80-9bd4-21f0cb7ee79b)) + (net 242 "unconnected-(J9-Pad6)") (pinfunction "Pin_6") (pintype "passive") (tstamp 576dd4d0-7e3a-4e80-9bd4-21f0cb7ee79b)) (pad "7" smd roundrect (at 3.125 -2.4) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 169 "/Control on separate board/CW_TONE") (pinfunction "Pin_7") (pintype "passive") (tstamp 1876b23e-d200-4a9e-8a5b-976ca601e24e)) + (net 168 "/Control on separate board/CW_TONE") (pinfunction "Pin_7") (pintype "passive") (tstamp 1876b23e-d200-4a9e-8a5b-976ca601e24e)) (pad "8" smd roundrect (at 4.375 -2.4) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "Pin_8") (pintype "passive") (tstamp 6a54fd2e-9bc2-4ce3-b843-66e0c1b7c472)) (pad "MP" smd roundrect (at -6.925 0.5) (size 2.1 3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.119048) (tstamp 3f5943d9-2bb3-4538-8b96-17f819633377)) @@ -14997,7 +15292,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 8e80d022-68b1-4c28-83ad-0ef0268dedbd) - (at 195.262 -13.772) + (at 249.936 -5.6935 -90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -15005,15 +15300,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/28ec2197-9950-4694-b923-4a679d7c97e2") (attr smd) - (fp_text reference "R128" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R128" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp dee28471-6dc4-4549-8dc6-8cf62ccf8223) ) - (fp_text value "1k" (at 0 1.43) (layer "F.Fab") + (fp_text value "1k" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 7c64ab5e-454b-40e2-8f6d-5a2237db49cb) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 7144f2eb-b923-4745-9318-9f7983351c0b) ) @@ -15027,9 +15322,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 3aedc1c8-8848-47ec-86e6-2cf958891783)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 5e07f0d4-2841-41d6-8633-14e6d24cdca0)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 9427c217-0f22-4533-8789-da0f5b1266d1)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 129 "Net-(C120-Pad2)") (pintype "passive") (tstamp 6d300178-dfb4-4403-a7ca-ca0ada2bf1f6)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 128 "Net-(C120-Pad2)") (pintype "passive") (tstamp 6d300178-dfb4-4403-a7ca-ca0ada2bf1f6)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 1da76c90-9a03-429b-abd9-e1c5041aa3af)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) @@ -15085,7 +15380,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 8f7678b6-c16b-409b-b68e-06436505ef67) - (at 375.484 -54.004) + (at 170.125 201.901) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -15116,9 +15411,9 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp ac295ee0-8eb8-4002-a5a3-cb25c277bf28)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e7e6f00d-3e9c-42d9-b580-9d6f6f8cbb5b)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 141 "VGG1") (pintype "passive") (tstamp 4ea9e714-a2b3-4363-97ea-90ff7a868a92)) + (net 140 "VGG1") (pintype "passive") (tstamp 4ea9e714-a2b3-4363-97ea-90ff7a868a92)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 145 "Net-(C143-Pad2)") (pintype "passive") (tstamp 3a3b5eba-3efa-414e-9d30-5c421cebcad4)) + (net 144 "Net-(C143-Pad2)") (pintype "passive") (tstamp 3a3b5eba-3efa-414e-9d30-5c421cebcad4)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -15159,7 +15454,7 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 85101264-755d-44e8-b9c2-f38b8f2865a9)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp bbec2595-794e-4554-80d4-c93d5fbc24b0)) (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 305 "Net-(Q11-Pad3)") (pintype "passive") (tstamp 57f858a8-73be-428c-a046-40f1ed09ff8c)) + (net 304 "Net-(Q11-Pad3)") (pintype "passive") (tstamp 57f858a8-73be-428c-a046-40f1ed09ff8c)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp a6fbd7ff-54aa-4724-afca-1244c6eb9d95)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -15203,7 +15498,7 @@ (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp cff9ded4-6042-4f50-8d92-f5eb4d577d2b)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp de3b564a-2af1-49e0-9208-bbd96de5ef97)) (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 440bd624-610c-4bb0-91bc-ec3b995e7361)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 440bd624-610c-4bb0-91bc-ec3b995e7361)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 92ea3b0b-202b-4709-8fdf-efe112bb8e8f)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" @@ -15246,9 +15541,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 50046454-76b7-412a-a6b3-06487733237d)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp d1f4362f-4d3a-4e9d-a165-5466c4cbc6b7)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 331 "Net-(R101-Pad1)") (pintype "passive") (tstamp fcc56f34-fedd-436c-9cdb-82cab58831fb)) + (net 330 "Net-(R101-Pad1)") (pintype "passive") (tstamp fcc56f34-fedd-436c-9cdb-82cab58831fb)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 330 "Net-(R100-Pad1)") (pintype "passive") (tstamp a0a4f9fe-55b7-474e-9c9c-1eccf64d93c9)) + (net 329 "Net-(R100-Pad1)") (pintype "passive") (tstamp a0a4f9fe-55b7-474e-9c9c-1eccf64d93c9)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -15293,9 +15588,9 @@ (fp_line (start 0.65 -1.45) (end 0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp 8656739f-f68c-426b-8604-4898445e3869)) (fp_line (start -0.65 -1.125) (end -0.325 -1.45) (layer "F.Fab") (width 0.1) (tstamp 9d264443-c7c1-460d-87d8-3755e6687c23)) (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 302 "Net-(Q10-Pad1)") (pinfunction "B") (pintype "input") (tstamp 2664d6ee-b706-43b2-9489-ec5a03379d22)) + (net 301 "Net-(Q10-Pad1)") (pinfunction "B") (pintype "input") (tstamp 2664d6ee-b706-43b2-9489-ec5a03379d22)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 303 "Net-(Q10-Pad2)") (pinfunction "E") (pintype "passive") (tstamp af74c9ca-846e-4288-b4fd-2c4cb63f294e)) + (net 302 "Net-(Q10-Pad2)") (pinfunction "E") (pintype "passive") (tstamp af74c9ca-846e-4288-b4fd-2c4cb63f294e)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 64 "Net-(C54-Pad2)") (pinfunction "C") (pintype "passive") (tstamp f6923c26-4f75-427f-983b-654ed3ea1aa4)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" @@ -15338,9 +15633,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp d0e08118-a6e8-437f-9bb5-163838e5e109)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp fa484cf5-b04b-4ada-bb1c-9609da6e2faf)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 170 "Net-(C176-Pad1)") (pintype "passive") (tstamp f7b937b8-f2f3-4b46-b1f1-f999757a4773)) + (net 169 "Net-(C176-Pad1)") (pintype "passive") (tstamp f7b937b8-f2f3-4b46-b1f1-f999757a4773)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 349 "/Control on separate board/MUTE_SPKR") (pintype "passive") (tstamp 928c8d07-894b-4254-a6c6-e74e0497ab04)) + (net 348 "/Control on separate board/MUTE_SPKR") (pintype "passive") (tstamp 928c8d07-894b-4254-a6c6-e74e0497ab04)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -15363,7 +15658,7 @@ (effects (font (size 1 1) (thickness 0.15))) (tstamp 308b0263-663d-4226-b984-89708ce5866b) ) - (fp_text value "10nF" (at 0 1.68 90) (layer "F.Fab") + (fp_text value "0R" (at 0 1.68 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 246444a2-3827-421e-8d66-4c4b16f20db0) ) @@ -15438,7 +15733,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 92a011a6-2ecc-478d-a26f-4cbdf8cf0d1c) - (at 218.812 -34.552) + (at 108.576 -24.138) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -15470,9 +15765,9 @@ (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 5dd382ca-6020-4aca-98d3-1e67531b71f7)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp a7732cc6-8020-4a3d-8f21-87015718c776)) (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 132 "Net-(C126-Pad1)") (pintype "passive") (tstamp dc1533af-ccb2-4904-b73b-908f62604535)) + (net 131 "Net-(C126-Pad1)") (pintype "passive") (tstamp dc1533af-ccb2-4904-b73b-908f62604535)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 136 "/70MHz VHF Frontend/RX_TO_MIX") (pintype "passive") (tstamp c1de5aa3-dd5e-46c2-ae66-742c2f638662)) + (net 135 "/70MHz VHF Frontend/RX_TO_MIX") (pintype "passive") (tstamp c1de5aa3-dd5e-46c2-ae66-742c2f638662)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -15557,9 +15852,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp be17a17a-8460-44b5-8b21-ee5259c7aef3)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp fdff07b7-8064-45e0-aa7c-faae8f276194)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 292e4eba-a6a4-42a0-ad0d-431a65177255)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 292e4eba-a6a4-42a0-ad0d-431a65177255)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 284 "/Control on separate board/RESETn") (pintype "passive") (tstamp 71180ae9-614a-4911-af39-0b828a27743b)) + (net 283 "/Control on separate board/RESETn") (pintype "passive") (tstamp 71180ae9-614a-4911-af39-0b828a27743b)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -15600,9 +15895,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp cfa8db8e-74df-410c-b209-05ae840a1ad0)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp dd9169d2-57dc-499d-b313-433e39e43af5)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 167 "Net-(C172-Pad1)") (pintype "passive") (tstamp ccd4145d-6493-489a-bd0e-62467f4bf65f)) + (net 166 "Net-(C172-Pad1)") (pintype "passive") (tstamp ccd4145d-6493-489a-bd0e-62467f4bf65f)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 166 "Net-(C171-Pad1)") (pintype "passive") (tstamp 206b2ec5-7426-4c5a-8f8b-9c7b452a11c0)) + (net 165 "Net-(C171-Pad1)") (pintype "passive") (tstamp 206b2ec5-7426-4c5a-8f8b-9c7b452a11c0)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -15612,7 +15907,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 950a8679-fda5-40ad-8da5-0e328ba9ba70) - (at 208.832 -34.702) + (at 274.701 -6.223 180) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "Need_order" "0") @@ -15642,9 +15937,9 @@ (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 8a02ff3a-9145-4c7c-97e9-0c4a7dc275b2)) (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 92fc9aeb-60c7-4738-80f1-ad0a927bb796)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp c6f6cf68-ca68-4e51-a31a-e054f6faa79f)) - (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 137 "/70MHz VHF Frontend/VHF_TX") (pintype "passive") (tstamp 893cf87f-9003-4dbf-980d-cef74d0f9806)) - (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (pad "1" smd roundrect (at -1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 136 "/70MHz VHF Frontend/VHF_TX") (pintype "passive") (tstamp 893cf87f-9003-4dbf-980d-cef74d0f9806)) + (pad "2" smd roundrect (at 1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 23eac6b3-e7a9-4b0b-aa85-cf64abedb9e7)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) @@ -15655,7 +15950,7 @@ (footprint "Package_TO_SOT_SMD:SOT-223-3_TabPin2" (layer "F.Cu") (tedit 5A02FF57) (tstamp 95729346-6092-4dcd-bfe3-b585ef7e6505) - (at 39.8 -18.79) + (at -93.21 81.316) (descr "module CMS SOT223 4 pins") (tags "CMS SOT") (property "MPN" "LD1117S33CTR") @@ -15739,7 +16034,7 @@ (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 87 "Net-(C73-Pad2)") (pintype "passive") (tstamp 8860cc2a-27dd-40d6-9cb9-82b356bbe6fa)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 186 "Net-(D15-Pad2)") (pintype "passive") (tstamp 13fc8781-18cd-46e7-8300-e0aae8b31c09)) + (net 185 "Net-(D15-Pad2)") (pintype "passive") (tstamp 13fc8781-18cd-46e7-8300-e0aae8b31c09)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -15786,9 +16081,9 @@ (fp_line (start 1.27 -1.27) (end 1.27 3.81) (layer "F.Fab") (width 0.1) (tstamp b0d0c33f-48a4-49f7-88bb-977f9c004c81)) (fp_line (start -1.27 3.81) (end -1.27 -0.635) (layer "F.Fab") (width 0.1) (tstamp f12f0a80-deda-4c2b-ad06-38877b05c646)) (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 271 "/Control on separate board/PC14") (pinfunction "Pin_1") (pintype "passive") (tstamp fe417b6c-da70-4485-b0f0-8555e8bfbd20)) + (net 270 "/Control on separate board/PC14") (pinfunction "Pin_1") (pintype "passive") (tstamp fe417b6c-da70-4485-b0f0-8555e8bfbd20)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 272 "/Control on separate board/PC13") (pinfunction "Pin_2") (pintype "passive") (tstamp 50628873-b7c2-4606-935e-66d6d9589848)) + (net 271 "/Control on separate board/PC13") (pinfunction "Pin_2") (pintype "passive") (tstamp 50628873-b7c2-4606-935e-66d6d9589848)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -15798,7 +16093,7 @@ (footprint "Inductor_SMD:L_1008_2520Metric" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 9723f5b4-0c60-41f6-97c3-391346b54ad0) - (at 369.184 -58.904) + (at 163.825 197.001) (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") (tags "inductor") (property "MPN" "") @@ -15829,9 +16124,9 @@ (fp_line (start 1.25 1) (end -1.25 1) (layer "F.Fab") (width 0.1) (tstamp de8d5f77-39d3-48c0-8161-980bb4cade45)) (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp e767d619-62ee-4788-a8d8-c9ea91142404)) (pad "1" smd roundrect (at -1.075 0) (size 1.25 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.2) - (net 149 "Net-(C147-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 7fb55707-3151-44da-a5f7-052d9eedda05)) + (net 148 "Net-(C147-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 7fb55707-3151-44da-a5f7-052d9eedda05)) (pad "2" smd roundrect (at 1.075 0) (size 1.25 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.2) - (net 294 "Net-(L39-Pad2)") (pinfunction "2") (pintype "passive") (tstamp db5c1d4f-eba7-4423-8eca-494ec0cad9b6)) + (net 293 "Net-(L39-Pad2)") (pinfunction "2") (pintype "passive") (tstamp db5c1d4f-eba7-4423-8eca-494ec0cad9b6)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -15841,7 +16136,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 9739faab-71e8-46b4-9708-838032fe3ebb) - (at 206.625 66.885) + (at 45.223 158.325) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A680GXAPW1BC") @@ -15923,13 +16218,13 @@ (fp_line (start -1.27 0) (end 0 -1.27) (layer "F.Fab") (width 0.1) (tstamp c82b1356-6acc-4daf-b4ed-535f6551cef2)) (fp_line (start 3.81 -1.27) (end 3.81 6.35) (layer "F.Fab") (width 0.1) (tstamp f0cf44b5-5456-4a29-bbe6-0b6571c9c86f)) (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 164 "/Control on separate board/3.3V_UI") (pinfunction "Pin_1") (pintype "passive") (tstamp d4ef5229-1fdd-41e1-ae5e-d3fd7d0c5657)) + (net 163 "/Control on separate board/3.3V_UI") (pinfunction "Pin_1") (pintype "passive") (tstamp d4ef5229-1fdd-41e1-ae5e-d3fd7d0c5657)) (pad "2" thru_hole oval (at 2.54 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 164 "/Control on separate board/3.3V_UI") (pinfunction "Pin_2") (pintype "passive") (tstamp f5c09ff5-832f-47c8-8a4b-37e9b25b64da)) + (net 163 "/Control on separate board/3.3V_UI") (pinfunction "Pin_2") (pintype "passive") (tstamp f5c09ff5-832f-47c8-8a4b-37e9b25b64da)) (pad "3" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 285 "Net-(J36-Pad3)") (pinfunction "Pin_3") (pintype "passive") (tstamp 26465ee8-7d35-4aaa-a8b7-0057163e38d8)) + (net 284 "Net-(J36-Pad3)") (pinfunction "Pin_3") (pintype "passive") (tstamp 26465ee8-7d35-4aaa-a8b7-0057163e38d8)) (pad "4" thru_hole oval (at 2.54 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 286 "Net-(J36-Pad4)") (pinfunction "Pin_4") (pintype "passive") (tstamp 37b7ff88-b950-473b-bafe-5bc9363aa0d5)) + (net 285 "Net-(J36-Pad4)") (pinfunction "Pin_4") (pintype "passive") (tstamp 37b7ff88-b950-473b-bafe-5bc9363aa0d5)) (pad "5" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_5") (pintype "passive") (tstamp 962fde91-e4e0-4b06-9d00-6957551f31b4)) (pad "6" thru_hole oval (at 2.54 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) @@ -16014,7 +16309,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 9878c161-c626-4bde-a804-c7a156e8608f) - (at 344.974 -35.614) + (at 139.615 220.291) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "885612007040/VJ0805A102GXXPW1BC") @@ -16046,9 +16341,9 @@ (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp a057caf3-d6af-456a-b43e-73a33cca8277)) (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp ee065a94-14d4-4d01-9f0d-6b45700b21a3)) (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 146 "Net-(C144-Pad1)") (pintype "passive") (tstamp e68903a1-5115-4f5f-8a11-2fb901c61a22)) + (net 145 "Net-(C144-Pad1)") (pintype "passive") (tstamp e68903a1-5115-4f5f-8a11-2fb901c61a22)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 147 "Net-(C144-Pad2)") (pintype "passive") (tstamp fd499c07-9dee-44cc-a2bc-d966e099e05b)) + (net 146 "Net-(C144-Pad2)") (pintype "passive") (tstamp fd499c07-9dee-44cc-a2bc-d966e099e05b)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -16091,7 +16386,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 9b78deae-1ffd-45c6-ad78-e959ac7ddcff)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 330 "Net-(R100-Pad1)") (pintype "passive") (tstamp fdb06ad3-7f41-4583-8127-c90477d32e4c)) + (net 329 "Net-(R100-Pad1)") (pintype "passive") (tstamp fdb06ad3-7f41-4583-8127-c90477d32e4c)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -16101,7 +16396,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 99199d8b-3e24-4192-958d-7b1f74555d34) - (at 199.912 -17.522) + (at 270.891 -15.113) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -16133,9 +16428,9 @@ (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp cc3a3c0a-0cb1-4f1b-bb38-b05e29b2577a)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp ee6b13a9-5510-4b8a-bb84-79e759e4666e)) (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 133 "Net-(C128-Pad1)") (pintype "passive") (tstamp 0d056394-0e63-499d-965f-956374a59121)) + (net 132 "Net-(C128-Pad1)") (pintype "passive") (tstamp 0d056394-0e63-499d-965f-956374a59121)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 137 "/70MHz VHF Frontend/VHF_TX") (pintype "passive") (tstamp 008bdad5-ed4c-47eb-9a69-f84d3f802a3e)) + (net 136 "/70MHz VHF Frontend/VHF_TX") (pintype "passive") (tstamp 008bdad5-ed4c-47eb-9a69-f84d3f802a3e)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -16145,7 +16440,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 992251e9-8fb9-4f5f-9b82-3bb59a509ce8) - (at 218.952 -42.082) + (at 231.394 -7.112) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -16177,9 +16472,9 @@ (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp bfed4c35-72a8-4f73-84ac-925343739efe)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp f94d1740-78cc-4033-b098-e7f34d7934eb)) (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 113 "Net-(C103-Pad1)") (pintype "passive") (tstamp a2eab1ab-4110-40fd-b15d-121cf813a87c)) + (net 112 "Net-(C103-Pad1)") (pintype "passive") (tstamp a2eab1ab-4110-40fd-b15d-121cf813a87c)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 116 "Net-(C107-Pad2)") (pintype "passive") (tstamp ab3779d3-d947-4259-96d4-e280d9535f34)) + (net 115 "Net-(C107-Pad2)") (pintype "passive") (tstamp ab3779d3-d947-4259-96d4-e280d9535f34)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -16271,17 +16566,17 @@ (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_1") (pintype "passive") (tstamp 9f15410c-0ced-4f61-925b-d989f5f05847)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 183 "Net-(D11-Pad3)") (pinfunction "Pin_2") (pintype "passive") (tstamp b5434987-7841-4e66-a219-c2f95e62bafa)) + (net 182 "Net-(D11-Pad3)") (pinfunction "Pin_2") (pintype "passive") (tstamp b5434987-7841-4e66-a219-c2f95e62bafa)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_3") (pintype "passive") (tstamp 3dfbc8e6-0b64-4601-a648-9afc87cd2ab8)) (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 263 "+VTX") (pinfunction "Pin_4") (pintype "passive") (tstamp 2970ba1b-5314-4674-92ce-77a80d058914)) + (net 262 "+VTX") (pinfunction "Pin_4") (pintype "passive") (tstamp 2970ba1b-5314-4674-92ce-77a80d058914)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 36 "+VRX") (pinfunction "Pin_5") (pintype "passive") (tstamp 865119c3-3798-4fbf-8977-8ba0c9ea9e18)) (pad "6" thru_hole oval (at 0 12.7) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_6") (pintype "passive") (tstamp ccd42ce5-1f0d-4a5f-bfd4-2be6b65bdfbb)) (pad "7" thru_hole oval (at 0 15.24) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 180 "Net-(D10-Pad3)") (pinfunction "Pin_7") (pintype "passive") (tstamp dded5d4d-0694-46ce-b85d-604854dbe811)) + (net 179 "Net-(D10-Pad3)") (pinfunction "Pin_7") (pintype "passive") (tstamp dded5d4d-0694-46ce-b85d-604854dbe811)) (pad "8" thru_hole oval (at 0 17.78) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_8") (pintype "passive") (tstamp e1abfc2c-2dbd-4e55-b9ce-9c8e0d1b64c1)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x08_P2.54mm_Vertical.wrl" @@ -16293,7 +16588,7 @@ (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 999843a5-0f6f-4b78-a194-1fae142473fc) - (at 176.072 -13.482) + (at 247.65 -11.557 90) (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "Description" "NEOSID 00 5231 03 originally, 135nH minimum") @@ -16303,15 +16598,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/b58d1a66-7e01-458d-ad91-f24b6bbcce6c") (attr smd) - (fp_text reference "L36" (at 0 -2.05) (layer "F.SilkS") + (fp_text reference "L36" (at 0 -2.05 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 9c067714-e380-492c-bee9-607fd8a4e35e) ) - (fp_text value "1uH" (at 0 2.05) (layer "F.Fab") + (fp_text value "1uH" (at 0 2.05 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp a99b5552-2587-4c2d-974b-0a0fb99319a9) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.62 0.62) (thickness 0.09))) (tstamp fda0ad2c-e680-4ea5-a5f4-c8498b83e496) ) @@ -16325,10 +16620,10 @@ (fp_line (start 1.25 -1) (end 1.25 1) (layer "F.Fab") (width 0.1) (tstamp 77d7d1f4-b67e-4a07-b03a-396aa23278b7)) (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp c3936ff9-f9a2-493a-b907-7052d232467a)) (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp ffe95a96-e6e6-4805-a852-8ae1eec9302f)) - (pad "1" smd roundrect (at -1.1625 0) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 134 "Net-(C128-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 444fe78b-1b89-4300-b387-5b4187e0fcee)) - (pad "2" smd roundrect (at 1.1625 0) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 131 "Net-(C125-Pad2)") (pinfunction "2") (pintype "passive") (tstamp c24b41a2-a829-4e0d-9cde-1a29449f6f97)) + (pad "1" smd roundrect (at -1.1625 0 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 133 "Net-(C128-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 444fe78b-1b89-4300-b387-5b4187e0fcee)) + (pad "2" smd roundrect (at 1.1625 0 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 130 "Net-(C125-Pad2)") (pinfunction "2") (pintype "passive") (tstamp c24b41a2-a829-4e0d-9cde-1a29449f6f97)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -16426,7 +16721,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 9ac9fbf0-a637-490a-aaf5-dbc5788838d4) - (at 180.892 -11.092) + (at 70.656 -0.678) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -16459,7 +16754,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 0a911520-3edc-42ae-a1af-7276a4a5d84f)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 136 "/70MHz VHF Frontend/RX_TO_MIX") (pintype "passive") (tstamp b1d19ad0-dae1-4558-8467-44b44c6e9ca8)) + (net 135 "/70MHz VHF Frontend/RX_TO_MIX") (pintype "passive") (tstamp b1d19ad0-dae1-4558-8467-44b44c6e9ca8)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -16469,7 +16764,7 @@ (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 9afd7bbc-f933-47ea-bb00-1471de402763) - (at 366.714 -49.534) + (at 161.355 206.371) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor") (property "Need_order" "0") @@ -16500,9 +16795,9 @@ (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 62c07803-a12c-4c7e-acd6-10cb4ffba933)) (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp c7d3c4f6-cb75-4ea9-9435-d516d13df4db)) (pad "1" smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902) - (net 149 "Net-(C147-Pad1)") (pintype "passive") (tstamp 1f7aa685-cd40-437f-85c1-a7551c7eacd0)) + (net 148 "Net-(C147-Pad1)") (pintype "passive") (tstamp 1f7aa685-cd40-437f-85c1-a7551c7eacd0)) (pad "2" smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902) - (net 294 "Net-(L39-Pad2)") (pintype "passive") (tstamp 00861ad5-7a4e-4654-b9d0-57081434f1e0)) + (net 293 "Net-(L39-Pad2)") (pintype "passive") (tstamp 00861ad5-7a4e-4654-b9d0-57081434f1e0)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -16510,38 +16805,9 @@ ) ) - (footprint "mpb:AirCoil-8mm" (layer "F.Cu") - (tedit 5E4EB890) (tstamp 9bfb3966-d3d7-4ba3-98a4-d24232705c53) - (at 184.202 -29.782) - (property "Description" "NEOSID 00 5261 00 originally, 115nH minimum") - (property "Need_order" "0") - (property "Sheetfile" "frontend_70.kicad_sch") - (property "Sheetname" "70MHz VHF Frontend") - (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/7fb0f97a-b463-46e4-bf11-460f021ab0ba") - (attr through_hole) - (fp_text reference "L38" (at 1.5 0 90) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 5056cda1-5912-4573-9d65-128691734f17) - ) - (fp_text value "100nH min" (at -2.5 0 90) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 3c288a2e-733f-4334-b231-b0a840a2aa0b) - ) - (fp_line (start 3.5 -6) (end -3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp 8c1e13db-2f44-4704-a6bf-ef32bc31da20)) - (fp_line (start 3.5 6) (end 3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp b205ac6a-40e3-48e2-ae67-fce585005f55)) - (fp_line (start -3.5 6) (end 3.5 6) (layer "F.SilkS") (width 0.15) (tstamp da3fe4b0-ac02-43c2-af31-0f4bc4e727fa)) - (fp_line (start -3.5 -6) (end -3.5 6) (layer "F.SilkS") (width 0.15) (tstamp ff492194-33c3-4c45-a426-a273fce1545f)) - (fp_arc (start 0 3) (mid -1.5 1.5) (end 0 0) (layer "F.SilkS") (width 0.15) (tstamp 471d8ee0-8293-4cfd-9ec8-d77102d82d3b)) - (fp_arc (start 0 0) (mid -1.5 -1.5) (end 0 -3) (layer "F.SilkS") (width 0.15) (tstamp e8201dfc-2823-429e-b192-460996e75dfa)) - (pad "1" thru_hole circle (at 0 -4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 133 "Net-(C128-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 26f6522f-5922-40fa-9dce-4d1f358c637c)) - (pad "2" thru_hole circle (at 0 4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 137 "/70MHz VHF Frontend/VHF_TX") (pinfunction "2") (pintype "passive") (tstamp fe721072-7d99-4c36-8b60-aa8bc0dcc6df)) - ) - (footprint "mpb:Jack_3.5mm_CUI_SJ-43515TS-SMT" (layer "F.Cu") (tedit 5C635470) (tstamp 9d62da4a-62c2-418f-b927-872a7eeeaab6) - (at 107.95 137.16 90) + (at 260.127 137.147 90) (descr "3.5 mm, 4 Pin, Right Angle, Surface Mount (SMT), Audio Jack Connector") (tags "3.5mm audio cui horizontal jack stereo") (property "MPN" "SJ-43515TS-SMT-TR") @@ -16591,17 +16857,17 @@ (pad "" np_thru_hole circle (at 0 4.5 90) (size 1.7 1.7) (drill 1.7) (layers *.Cu *.Mask) (tstamp 39eac7dc-3724-4736-b5e3-718874ffea5d)) (pad "" np_thru_hole circle (at 0 -2.5 90) (size 1.7 1.7) (drill 1.7) (layers *.Cu *.Mask) (tstamp c178c117-1ba5-4edb-b00a-8ca840def3dd)) (pad "NC" smd rect (at 3.683 -4.572 90) (size 2.8 2.2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 217 "unconnected-(J3-PadNC)") (pintype "no_connect") (tstamp ad26d9a8-798e-4480-812d-41c0273572f0)) + (net 216 "unconnected-(J3-PadNC)") (pintype "no_connect") (tstamp ad26d9a8-798e-4480-812d-41c0273572f0)) (pad "R1" smd rect (at 3.7 -1.6 90) (size 2.8 2.2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 218 "Net-(J3-PadR1)") (pintype "passive") (tstamp 4ce06ed8-d822-4fa1-ae5b-071a42dbc008)) + (net 217 "Net-(J3-PadR1)") (pintype "passive") (tstamp 4ce06ed8-d822-4fa1-ae5b-071a42dbc008)) (pad "R2" smd rect (at -3.7 -3.6 90) (size 2.8 2.2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 219 "unconnected-(J3-PadR2)") (pintype "passive+no_connect") (tstamp 4e46e48e-acd1-4a06-a675-829abd91fc9f)) + (net 218 "unconnected-(J3-PadR2)") (pintype "passive+no_connect") (tstamp 4e46e48e-acd1-4a06-a675-829abd91fc9f)) (pad "S" smd rect (at -3.7 -6.477 90) (size 2.8 2.2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 220 "Net-(J3-PadS)") (pintype "passive") (tstamp aa5b763f-4c19-4103-83c9-9b1c07257d4a)) + (net 219 "Net-(J3-PadS)") (pintype "passive") (tstamp aa5b763f-4c19-4103-83c9-9b1c07257d4a)) (pad "T" smd rect (at -3.7 5.8 90) (size 2.8 2.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 221 "Net-(J3-PadT)") (pintype "passive") (tstamp 47203117-3e4d-4b59-ba0c-a71cb896ba44)) + (net 220 "Net-(J3-PadT)") (pintype "passive") (tstamp 47203117-3e4d-4b59-ba0c-a71cb896ba44)) (pad "TN" smd rect (at 0.75 9.8 90) (size 2.8 2.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 222 "unconnected-(J3-PadTN)") (pintype "passive+no_connect") (tstamp eac6a203-34a8-423d-834e-050b44d38cb2)) + (net 221 "unconnected-(J3-PadTN)") (pintype "passive+no_connect") (tstamp eac6a203-34a8-423d-834e-050b44d38cb2)) (model "${KICAD6_3DMODEL_DIR}/Connector_Audio.3dshapes/Jack_3.5mm_CUI_SJ-3524-SMT_Horizontal.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -16611,7 +16877,7 @@ (footprint "Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 9e3f45f3-780b-48e3-b40d-1284e93efe7f) - (at 78.64 -28.34) + (at -54.37 71.766) (descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "TAJA106K016RNJ") @@ -16684,7 +16950,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 9e56115d-59bd-4b10-b256-547b76a70c00) - (at 64.8 -13.44) + (at -68.21 86.666) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -16727,7 +16993,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 9e7e476c-61bd-4900-b254-745c2b332005) - (at 334.284 -17.904) + (at 128.925 238.001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -16758,9 +17024,9 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e6e93ff2-4455-48a0-8dfa-4d306850f00b)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp feb8c4bf-4ee5-4be3-8154-701736de27e2)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 147 "Net-(C144-Pad2)") (pintype "passive") (tstamp a6fb7a68-abb1-446c-95a8-2aa2157e8bf1)) + (net 146 "Net-(C144-Pad2)") (pintype "passive") (tstamp a6fb7a68-abb1-446c-95a8-2aa2157e8bf1)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 148 "VGG2") (pintype "passive") (tstamp af361ef2-ea0e-49a2-922d-5e7c52881f54)) + (net 147 "VGG2") (pintype "passive") (tstamp af361ef2-ea0e-49a2-922d-5e7c52881f54)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -16770,7 +17036,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 9f31afb4-8645-482d-abe7-ce94543537fc) - (at 349.554 -32.854) + (at 144.195 223.051) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -16804,7 +17070,7 @@ (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 456f4285-7308-44e3-8ca1-318116f1ff7b)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 157 "Net-(C156-Pad2)") (pintype "passive") (tstamp cc19e676-df9b-4981-a19d-40459d6a58fe)) + (net 156 "Net-(C156-Pad2)") (pintype "passive") (tstamp cc19e676-df9b-4981-a19d-40459d6a58fe)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -16858,7 +17124,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp a16f96db-3aed-4e15-b4a6-8b254b608169) - (at 356.964 -43.064) + (at 151.605 212.841) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM2165C2A511JA01D") @@ -16892,7 +17158,7 @@ (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 61467397-fa66-486a-ac37-e0d26703e173)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 153 "Net-(C149-Pad1)") (pintype "passive") (tstamp 36ffc983-9b19-4a9b-96d8-8b029f5d1013)) + (net 152 "Net-(C149-Pad1)") (pintype "passive") (tstamp 36ffc983-9b19-4a9b-96d8-8b029f5d1013)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -16902,7 +17168,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp a1a322a3-19b5-4aa2-8a50-037593a222f8) - (at 373.834 -56.514) + (at 168.475 199.391) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -16933,9 +17199,9 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp b497c802-fa78-4cfd-87b8-0971ce30adfd)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp b59f9e7f-d5b3-41c2-b063-5bdc0057cd52)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 142 "Net-(C140-Pad1)") (pintype "passive") (tstamp 92b142b3-7106-4225-b11e-fc955215e2a2)) + (net 141 "Net-(C140-Pad1)") (pintype "passive") (tstamp 92b142b3-7106-4225-b11e-fc955215e2a2)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 146 "Net-(C144-Pad1)") (pintype "passive") (tstamp 00b51e9d-bb77-402a-9eeb-fd7a24af4b57)) + (net 145 "Net-(C144-Pad1)") (pintype "passive") (tstamp 00b51e9d-bb77-402a-9eeb-fd7a24af4b57)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -17021,7 +17287,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 55 "Net-(C48-Pad1)") (pintype "passive") (tstamp 647978ca-c986-47e8-968f-9ebc0f38695a)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 302 "Net-(Q10-Pad1)") (pintype "passive") (tstamp 5cde6a3c-bde0-43a0-9dd0-2ec2c04a91c5)) + (net 301 "Net-(Q10-Pad1)") (pintype "passive") (tstamp 5cde6a3c-bde0-43a0-9dd0-2ec2c04a91c5)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -17062,9 +17328,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp ca54075e-add1-4c64-9d8f-d43fcb04291d)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp f41934c4-4198-459e-bbf3-ea210e8bfbf2)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 323 "Net-(R31-Pad1)") (pintype "passive") (tstamp 0694ac78-e537-42fb-85bc-16a55de55827)) + (net 322 "Net-(R31-Pad1)") (pintype "passive") (tstamp 0694ac78-e537-42fb-85bc-16a55de55827)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 324 "Net-(R31-Pad2)") (pintype "passive") (tstamp 89c14e55-58a7-4fbd-b46f-1d9232cd1314)) + (net 323 "Net-(R31-Pad2)") (pintype "passive") (tstamp 89c14e55-58a7-4fbd-b46f-1d9232cd1314)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -17074,7 +17340,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp a3c10996-eea2-48a4-bb6b-570ffb533195) - (at 185.932 -12.242) + (at 237.998 -10.16) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A103KXJTBC") @@ -17108,7 +17374,7 @@ (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 0da60d95-99b9-409f-8fad-5114156a4e5f)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 123 "Net-(C114-Pad2)") (pintype "passive") (tstamp 7fa5ff1a-7250-4003-8a05-2b9850680732)) + (net 122 "Net-(C114-Pad2)") (pintype "passive") (tstamp 7fa5ff1a-7250-4003-8a05-2b9850680732)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -17149,9 +17415,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e9c8904b-e547-4118-9f09-02047b383f33)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp fe4adfb6-7cda-4af9-86fd-592a29b204b9)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 165 "Net-(C169-Pad1)") (pintype "passive") (tstamp 8ce8a161-7774-48d7-a01a-d191aa0c2ee1)) + (net 164 "Net-(C169-Pad1)") (pintype "passive") (tstamp 8ce8a161-7774-48d7-a01a-d191aa0c2ee1)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 348 "/Control on separate board/PWM_CW") (pintype "passive") (tstamp b1f9a844-38ca-48dd-9498-8d95b4ecd0ee)) + (net 347 "/Control on separate board/PWM_CW") (pintype "passive") (tstamp b1f9a844-38ca-48dd-9498-8d95b4ecd0ee)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -17161,7 +17427,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp a4b00fbe-6f3e-46d6-b47c-a639f58bf6a8) - (at 349.784 -35.614) + (at 144.425 220.291) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "C2012C0G1H333J125AA") @@ -17195,7 +17461,7 @@ (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 4f0a988a-fbc7-4733-a333-27f9b387a185)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 153 "Net-(C149-Pad1)") (pintype "passive") (tstamp 41ca2cae-c8ba-4866-b70b-e9859c91fe6d)) + (net 152 "Net-(C149-Pad1)") (pintype "passive") (tstamp 41ca2cae-c8ba-4866-b70b-e9859c91fe6d)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -17253,9 +17519,9 @@ (pad "1" thru_hole circle (at 6.5 0 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "1") (pintype "passive") (tstamp 9f50df94-cabc-4c86-bce9-3a9231ef2a74)) (pad "2" thru_hole circle (at 6.5 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) - (net 340 "/Control on separate board/BTN0") (pinfunction "2") (pintype "passive") (tstamp 92de8b0a-5214-4606-89f7-0c2a7ed11835)) + (net 339 "/Control on separate board/BTN0") (pinfunction "2") (pintype "passive") (tstamp 92de8b0a-5214-4606-89f7-0c2a7ed11835)) (pad "2" thru_hole circle (at 0 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) - (net 340 "/Control on separate board/BTN0") (pinfunction "2") (pintype "passive") (tstamp ee9e75d6-8b48-4900-afd8-f41ed339b230)) + (net 339 "/Control on separate board/BTN0") (pinfunction "2") (pintype "passive") (tstamp ee9e75d6-8b48-4900-afd8-f41ed339b230)) (model "${KICAD6_3DMODEL_DIR}/Button_Switch_THT.3dshapes/SW_PUSH_6mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -17353,7 +17619,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp a66ee2a0-1fad-4ba7-a006-e3c59ecf2fcd) - (at 232.522 -52.782) + (at 177.74 -55.964) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -17385,9 +17651,9 @@ (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 390fd5a7-c3e6-4cb5-8b47-0523034e7b34)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp ee479603-e46b-4a8a-b79d-f577e21012f4)) (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 130 "Net-(C121-Pad1)") (pintype "passive") (tstamp 1fb13d8b-6063-40f3-b605-4ac0cde4f892)) + (net 129 "Net-(C121-Pad1)") (pintype "passive") (tstamp 1fb13d8b-6063-40f3-b605-4ac0cde4f892)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 124 "Net-(C115-Pad2)") (pintype "passive") (tstamp a81e068d-c36f-48a9-aac5-db5d0c821f3a)) + (net 123 "Net-(C115-Pad2)") (pintype "passive") (tstamp a81e068d-c36f-48a9-aac5-db5d0c821f3a)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -17397,7 +17663,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp a6d6d917-a88e-49a1-b30a-705885dad3f1) - (at 338.644 -39.594) + (at 133.285 216.311) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -17500,7 +17766,7 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp c27b96fd-8510-4456-b78a-73217842f482)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp e7227341-1a74-4c96-ac4c-0991a04500cf)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 255 "/Baseband/VHF_IN") (pintype "passive") (tstamp 4704e1f3-2015-46c1-aef9-7505b71d0373)) + (net 254 "/Baseband/VHF_IN") (pintype "passive") (tstamp 4704e1f3-2015-46c1-aef9-7505b71d0373)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 233c51ce-1088-48e3-90c7-2bc80a847b3b)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -17512,7 +17778,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp a8bb4894-9b2c-4478-9dac-58d3950071e6) - (at 371.094 -47.244) + (at 165.735 208.661) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -17543,9 +17809,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 7e093482-dc49-4742-af39-34b5b95120c0)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp d854972b-0754-4c1c-aac7-bd19dc439ea8)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 333 "Net-(R135-Pad1)") (pintype "passive") (tstamp ba582f5e-568e-456b-82d5-88f86a3787ec)) + (net 332 "Net-(R135-Pad1)") (pintype "passive") (tstamp ba582f5e-568e-456b-82d5-88f86a3787ec)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 259 "/PA 70MHz/PA_IN") (pintype "passive") (tstamp dea93624-4783-49f0-88ec-0be0cd41874d)) + (net 258 "/PA 70MHz/PA_IN") (pintype "passive") (tstamp dea93624-4783-49f0-88ec-0be0cd41874d)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -17643,7 +17909,7 @@ (footprint "Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical" (layer "F.Cu") (tedit 59FED5CC) (tstamp aaea2298-7695-433c-be18-5bd21c489248) - (at 217.79 94.29 -90) + (at 56.388 185.73 -90) (descr "Through hole straight pin header, 1x03, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x03 2.54mm single row") (property "Description" "") @@ -17684,7 +17950,7 @@ (pad "1" thru_hole rect (at 0 0 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 67 "Net-(C56-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 06b632ef-f19e-4466-8b6c-eb228b8621c8)) (pad "2" thru_hole oval (at 0 2.54 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 267 "Net-(J24-Pad7)") (pinfunction "2") (pintype "passive") (tstamp 93291404-af6a-4035-982e-84223d5b550f)) + (net 266 "Net-(J24-Pad7)") (pinfunction "2") (pintype "passive") (tstamp 93291404-af6a-4035-982e-84223d5b550f)) (pad "3" thru_hole oval (at 0 5.08 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "3") (pintype "passive") (tstamp f90d6763-b525-43d5-8e9a-5a7a996b4c5e)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x03_P2.54mm_Vertical.wrl" @@ -17696,7 +17962,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp ab3323b2-7bf3-4efe-83a6-95c811ba53dc) - (at 232.522 -45.252) + (at 137.414 -26.416 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -17705,15 +17971,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/845765f8-fa50-4be6-bcf5-b96a39f324bf") (attr smd) - (fp_text reference "C91" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "C91" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 21a6d22b-ae51-4c48-b2f1-f4083d96133c) ) - (fp_text value "18pF" (at 0 1.43) (layer "F.Fab") + (fp_text value "18pF" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp aa8c450d-01c9-4062-835c-3e863f062d77) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp c87deb39-3a74-41e7-b545-298efaa8703c) ) @@ -17727,10 +17993,10 @@ (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp ae50b0ac-deff-460e-a390-3075573c73bb)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp d65ab39b-1c15-4c1f-8811-10ecf99155e9)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp f651e8d6-9c0e-4f76-96d3-7fe00acb74ea)) - (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 104 "Net-(C100-Pad1)") (pintype "passive") (tstamp 50def238-4a29-44d2-bba2-6061295bfcf0)) - (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 105 "/70MHz VHF Frontend/VHF_RX") (pintype "passive") (tstamp 17e94ac5-2f74-433e-b575-36961f20d6b2)) + (pad "1" smd roundrect (at -0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 2 "GND") (pintype "passive") (tstamp 50def238-4a29-44d2-bba2-6061295bfcf0)) + (pad "2" smd roundrect (at 0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 104 "/70MHz VHF Frontend/VHF_RX") (pintype "passive") (tstamp 17e94ac5-2f74-433e-b575-36961f20d6b2)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -17740,7 +18006,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp ab442f81-fb4e-4648-8118-73ea0127da65) - (at 329.934 -17.904) + (at 124.575 238.001) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -17771,9 +18037,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 2fd587bd-ecfb-47ce-ac08-e731355cfd6f)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 4d9897fe-c05e-4686-90fc-5f5ddf96fe38)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 142 "Net-(C140-Pad1)") (pintype "passive") (tstamp 30531f33-864b-47fd-8efe-1be22b706ade)) + (net 141 "Net-(C140-Pad1)") (pintype "passive") (tstamp 30531f33-864b-47fd-8efe-1be22b706ade)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 146 "Net-(C144-Pad1)") (pintype "passive") (tstamp e0006723-80ac-42f3-91d8-eb7b6100d3b3)) + (net 145 "Net-(C144-Pad1)") (pintype "passive") (tstamp e0006723-80ac-42f3-91d8-eb7b6100d3b3)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -17783,7 +18049,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp ab50f954-b318-4ea3-b893-bab40d018432) - (at 17.79 -12.73) + (at -115.22 87.376) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -17816,7 +18082,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 6 "+9VA") (pintype "passive") (tstamp fdc17d1b-82be-42c0-93a7-f8839ce3ab2b)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 297 "Net-(Q2-Pad4)") (pintype "passive") (tstamp 75075574-1fa6-4c8c-ac1e-981f2570715d)) + (net 296 "Net-(Q2-Pad4)") (pintype "passive") (tstamp 75075574-1fa6-4c8c-ac1e-981f2570715d)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -17826,7 +18092,7 @@ (footprint "Package_TO_SOT_SMD:SOT-223-3_TabPin2" (layer "F.Cu") (tedit 5A02FF57) (tstamp abc4e9a2-d3e1-40c5-a38d-cd02fdbf578a) - (at 93.11 -70.69) + (at -39.9 29.416) (descr "module CMS SOT223 4 pins") (tags "CMS SOT") (property "MPN" "LD1117S50CTR") @@ -17953,7 +18219,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 69 "Net-(C58-Pad1)") (pintype "passive") (tstamp c10ec037-1a25-4655-a86f-918e7a8be93b)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 306 "Net-(Q13-Pad1)") (pintype "passive") (tstamp 25c34589-ab99-4628-bfb6-8e4f9b902dff)) + (net 305 "Net-(Q13-Pad1)") (pintype "passive") (tstamp 25c34589-ab99-4628-bfb6-8e4f9b902dff)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -17995,7 +18261,7 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 7a7d45a3-8103-4c05-94dc-181232990096)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 8962cb5c-cffe-4813-8267-3176dbd1c352)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 179 "Net-(D9-Pad1)") (pintype "passive") (tstamp 20bf87fc-cad3-4203-9e4c-7d37fa2f23d6)) + (net 178 "Net-(D9-Pad1)") (pintype "passive") (tstamp 20bf87fc-cad3-4203-9e4c-7d37fa2f23d6)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 65 "Net-(C55-Pad1)") (pintype "passive") (tstamp 7141c2ac-356d-4906-a6c3-04ff8bc2085e)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -18007,7 +18273,7 @@ (footprint "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" (layer "F.Cu") (tedit 5D9F72B1) (tstamp ad36673f-271c-4b52-a3f6-27dc9aa8fde8) - (at 92.41 -63.34) + (at -40.6 36.766) (descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "SOIC SO") (property "MPN" "IRF7309TRPBF") @@ -18044,19 +18310,19 @@ (pad "1" smd roundrect (at -2.475 -1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "S") (pintype "passive") (tstamp 369480b2-0e4f-4cbe-b8f6-12b995e031d3)) (pad "2" smd roundrect (at -2.475 -0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 244 "/EN_VRX") (pinfunction "G") (pintype "input") (tstamp 72bfe644-e23e-4e5a-a564-ad986817c47f)) + (net 243 "/EN_VRX") (pinfunction "G") (pintype "input") (tstamp 72bfe644-e23e-4e5a-a564-ad986817c47f)) (pad "3" smd roundrect (at -2.475 0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 6 "+9VA") (pinfunction "1") (pintype "passive") (tstamp 2dbc7e2c-c94a-4784-8d62-3c11cdced139)) (pad "4" smd roundrect (at -2.475 1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 297 "Net-(Q2-Pad4)") (pinfunction "G") (pintype "input") (tstamp 62c51e61-2a78-401d-b2e7-435deeaf359a)) + (net 296 "Net-(Q2-Pad4)") (pinfunction "G") (pintype "input") (tstamp 62c51e61-2a78-401d-b2e7-435deeaf359a)) (pad "5" smd roundrect (at 2.475 1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 36 "+VRX") (pinfunction "D") (pintype "passive") (tstamp 0e6864d2-329e-41c8-9341-783dbf6fee2c)) (pad "6" smd roundrect (at 2.475 0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 36 "+VRX") (pinfunction "D") (pintype "passive") (tstamp d7f197f4-b407-4757-b790-99ae0b66e7c6)) (pad "7" smd roundrect (at 2.475 -0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 297 "Net-(Q2-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 5f6e56c0-d475-4e09-aba7-b2e08b1d6275)) + (net 296 "Net-(Q2-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 5f6e56c0-d475-4e09-aba7-b2e08b1d6275)) (pad "8" smd roundrect (at 2.475 -1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 297 "Net-(Q2-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 6cf556db-1307-4464-abfc-eb62d2a8d5f4)) + (net 296 "Net-(Q2-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 6cf556db-1307-4464-abfc-eb62d2a8d5f4)) (model "${KICAD6_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -18066,7 +18332,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp aded91bc-7de1-4204-bbb2-8ff6b2b21619) - (at 118 147) + (at 270.177 146.987) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -18137,11 +18403,11 @@ (fp_line (start -1.5 0.3) (end -1.5 -0.8) (layer "F.Fab") (width 0.1) (tstamp 58e216fc-9ef8-4580-b085-780a2cdf6fa4)) (fp_line (start -1 0.8) (end -1.5 0.3) (layer "F.Fab") (width 0.1) (tstamp 723b2f13-c210-4c84-b4ba-792d89885ae8)) (pad "1" smd rect (at -1.2 0) (size 0.4 3.2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 346 "/Control on separate board/XTAL1") (pinfunction "1") (pintype "passive") (tstamp 24b1e5d9-22f8-4e1d-a422-c4687d7c7752)) + (net 345 "/Control on separate board/XTAL1") (pinfunction "1") (pintype "passive") (tstamp 24b1e5d9-22f8-4e1d-a422-c4687d7c7752)) (pad "2" smd rect (at 0 0) (size 0.4 3.2) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 17b51ca7-18b0-4452-8da4-b5489439d642)) (pad "3" smd rect (at 1.2 0) (size 0.4 3.2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 347 "/Control on separate board/XTAL2") (pinfunction "3") (pintype "passive") (tstamp 29a05a64-975c-4cec-8d28-96ffc4c374c2)) + (net 346 "/Control on separate board/XTAL2") (pinfunction "3") (pintype "passive") (tstamp 29a05a64-975c-4cec-8d28-96ffc4c374c2)) (model "${KICAD6_3DMODEL_DIR}/Crystal.3dshapes/Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -18151,7 +18417,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp aec76c9e-6473-48bd-9c73-4e657e6c63d4) - (at 356.964 -46.074) + (at 151.605 209.831) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A560JXAMC") @@ -18185,7 +18451,7 @@ (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp c4c012b5-0e21-479a-b8ca-7b7e446a9184)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 160 "Net-(C162-Pad2)") (pintype "passive") (tstamp 96964685-9b00-466b-9442-66a691bb5098)) + (net 159 "Net-(C162-Pad2)") (pintype "passive") (tstamp 96964685-9b00-466b-9442-66a691bb5098)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -18226,9 +18492,9 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c0467bdd-8775-4e0b-a2ea-83189329ecb4)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp dea2972c-a978-4009-b2c2-859d2267ede4)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 163 "/Control on separate board/ENC_A") (pintype "passive") (tstamp 7cbbf9d0-63cc-4be5-ba2f-44fc91681e4f)) + (net 162 "/Control on separate board/ENC_A") (pintype "passive") (tstamp 7cbbf9d0-63cc-4be5-ba2f-44fc91681e4f)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 339 "Net-(R161-Pad2)") (pintype "passive") (tstamp ba822cff-a278-436e-9733-db3138984e81)) + (net 338 "Net-(R161-Pad2)") (pintype "passive") (tstamp ba822cff-a278-436e-9733-db3138984e81)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -18269,7 +18535,7 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 66e691d7-39e8-4c21-bc31-6dd9d4b51a30)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 89e28a35-5be7-4b8b-8bc2-d7813887a673)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 324 "Net-(R31-Pad2)") (pintype "passive") (tstamp 04a8d6fd-c080-4fc4-8ddd-d04ca4e0cd61)) + (net 323 "Net-(R31-Pad2)") (pintype "passive") (tstamp 04a8d6fd-c080-4fc4-8ddd-d04ca4e0cd61)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 16 "/BFO") (pintype "passive") (tstamp f787bea9-d9c5-448b-856a-8bb0800e859c)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -18328,31 +18594,31 @@ (fp_line (start -2.45 -6.4) (end -3.45 -5.4) (layer "F.Fab") (width 0.1) (tstamp c91b803c-1222-4648-9f1e-0161fbbe9ed9)) (fp_line (start -3.45 -5.4) (end -3.45 6.4) (layer "F.Fab") (width 0.1) (tstamp e1fdf1c5-cb9a-4ce1-aeb6-b06e4af31d73)) (pad "1" smd rect (at -4.4 -4.445) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 190 "Net-(D17-Pad3)") (pinfunction "TD+") (pintype "passive") (tstamp 5c6ccfe3-338f-4d0c-bf23-7ce790f43e5b)) + (net 189 "Net-(D17-Pad3)") (pinfunction "TD+") (pintype "passive") (tstamp 5c6ccfe3-338f-4d0c-bf23-7ce790f43e5b)) (pad "2" smd rect (at -4.4 -3.175) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "C_TD") (pintype "passive") (tstamp 7a48f061-1b79-4564-86f1-48f706179b09)) (pad "3" smd rect (at -4.4 -1.905) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 189 "Net-(D16-Pad3)") (pinfunction "TD-") (pintype "passive") (tstamp 549dae49-5ab2-4288-a95a-692175a3e357)) + (net 188 "Net-(D16-Pad3)") (pinfunction "TD-") (pintype "passive") (tstamp 549dae49-5ab2-4288-a95a-692175a3e357)) (pad "4" smd rect (at -4.4 -0.635) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp f32ddb8e-fe34-4549-a5ae-035bf8d50287)) (pad "5" smd rect (at -4.4 0.635) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp fc78d779-4d64-46ef-8791-e66901c8db1f)) (pad "6" smd rect (at -4.4 1.905) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 187 "Net-(D16-Pad1)") (pinfunction "RD+") (pintype "passive") (tstamp 5f9fad5e-25bc-4420-a3a1-61bdb730991f)) + (net 186 "Net-(D16-Pad1)") (pinfunction "RD+") (pintype "passive") (tstamp 5f9fad5e-25bc-4420-a3a1-61bdb730991f)) (pad "7" smd rect (at -4.4 3.175) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 103 "Net-(C90-Pad2)") (pinfunction "C_RD") (pintype "passive") (tstamp 3220c836-0b5d-4d92-a064-0f3840c387da)) (pad "8" smd rect (at -4.4 4.445) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 188 "Net-(D16-Pad2)") (pinfunction "RD-") (pintype "passive") (tstamp 6a2f580b-9166-4dfb-96c8-cb5b5acd6380)) + (net 187 "Net-(D16-Pad2)") (pinfunction "RD-") (pintype "passive") (tstamp 6a2f580b-9166-4dfb-96c8-cb5b5acd6380)) (pad "9" smd rect (at 4.4 4.445) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 182 "Net-(D11-Pad1)") (pinfunction "RX-") (pintype "passive") (tstamp 05853b29-6602-43e0-b87b-1aa40dc472d2)) + (net 181 "Net-(D11-Pad1)") (pinfunction "RX-") (pintype "passive") (tstamp 05853b29-6602-43e0-b87b-1aa40dc472d2)) (pad "10" smd rect (at 4.4 3.175) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 357 "unconnected-(TR1-Pad10)") (pinfunction "C_RX") (pintype "passive+no_connect") (tstamp abfdf163-f142-4798-853d-747b2a9b86e4)) + (net 356 "unconnected-(TR1-Pad10)") (pinfunction "C_RX") (pintype "passive+no_connect") (tstamp abfdf163-f142-4798-853d-747b2a9b86e4)) (pad "11" smd rect (at 4.4 1.905) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "RX+") (pintype "passive") (tstamp ed853c7d-ae6d-4e7e-ab4b-10c3a1a633c6)) (pad "12" smd rect (at 4.4 0.635) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp 77085913-fc21-461a-b851-321f8972c6ff)) (pad "13" smd rect (at 4.4 -0.635) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp 4256be6e-9cae-41f4-9f1c-4f99c982b4ac)) (pad "14" smd rect (at 4.4 -1.905) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 328 "Net-(R103-Pad2)") (pinfunction "TX-") (pintype "passive") (tstamp 9eac9ae7-441e-440a-83ec-c0fbb6289194)) + (net 327 "Net-(R103-Pad2)") (pinfunction "TX-") (pintype "passive") (tstamp 9eac9ae7-441e-440a-83ec-c0fbb6289194)) (pad "15" smd rect (at 4.4 -3.175) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 358 "unconnected-(TR1-Pad15)") (pinfunction "C_TX") (pintype "passive+no_connect") (tstamp c0ee325d-0440-4d35-b009-0224bbaff4f0)) + (net 357 "unconnected-(TR1-Pad15)") (pinfunction "C_TX") (pintype "passive+no_connect") (tstamp c0ee325d-0440-4d35-b009-0224bbaff4f0)) (pad "16" smd rect (at 4.4 -4.445) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "TX+") (pintype "passive") (tstamp 2827143e-788b-46d4-bfec-a34642914796)) (model "${KICAD6_3DMODEL_DIR}/Transformer_SMD.3dshapes/Transformer_Ethernet_Bourns_PT61017PEL.wrl" @@ -18401,11 +18667,11 @@ (pad "1" smd rect (at -3.15 -2.3) (size 2 1.5) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "GND") (pintype "power_in") (tstamp 3502c788-1e63-48a7-a58b-3ba9b328987a)) (pad "2" smd rect (at -3.15 0) (size 2 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 164 "/Control on separate board/3.3V_UI") (pinfunction "VO") (pintype "power_out") (tstamp ddc9ad72-833b-4ac1-a47a-2f447bd4d728)) + (net 163 "/Control on separate board/3.3V_UI") (pinfunction "VO") (pintype "power_out") (tstamp ddc9ad72-833b-4ac1-a47a-2f447bd4d728)) (pad "2" smd rect (at 3.15 0) (size 2 3.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 164 "/Control on separate board/3.3V_UI") (pinfunction "VO") (pintype "power_out") (tstamp f43b154d-441f-4fb0-a37e-8df780cddf0d)) + (net 163 "/Control on separate board/3.3V_UI") (pinfunction "VO") (pintype "power_out") (tstamp f43b154d-441f-4fb0-a37e-8df780cddf0d)) (pad "3" smd rect (at -3.15 2.3) (size 2 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 171 "/Control on separate board/5V") (pinfunction "VI") (pintype "power_in") (tstamp c17071c5-fb83-4a59-b4b6-36aa9e28703e)) + (net 170 "/Control on separate board/5V") (pinfunction "VI") (pintype "power_in") (tstamp c17071c5-fb83-4a59-b4b6-36aa9e28703e)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-223.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -18446,7 +18712,7 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp caa63013-6f3a-452f-9697-125612d37a77)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp f08e759c-35d8-4a54-a703-c2df7c97fae5)) (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 305 "Net-(Q11-Pad3)") (pintype "passive") (tstamp c26f1d23-13c5-4caa-8b54-fc741cc4be76)) + (net 304 "Net-(Q11-Pad3)") (pintype "passive") (tstamp c26f1d23-13c5-4caa-8b54-fc741cc4be76)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 60 "Net-(C51-Pad2)") (pintype "passive") (tstamp d1c86c7c-8fa4-43b8-9825-79fecc1798bf)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -18529,7 +18795,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp b17211d3-d853-4300-88f1-7c01843ce175) - (at 118 113) + (at 270.177 112.987) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -18557,7 +18823,7 @@ (footprint "Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp b1841d2e-8062-4d03-a976-d7d562714049) - (at 314.654 -46.104) + (at 109.295 209.801) (descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "TAJA106K016RNJ") @@ -18589,7 +18855,7 @@ (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer "F.Fab") (width 0.1) (tstamp 59276105-be6f-4a7c-9e26-c3e5ed5394ab)) (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer "F.Fab") (width 0.1) (tstamp 9f292357-496b-4088-b8bd-0812cac76f87)) (pad "1" smd roundrect (at -1.5625 0) (size 1.325 1.8) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) - (net 155 "/PA 70MHz/VG_5V") (pintype "passive") (tstamp ec4ce95b-bf8c-4040-8eb4-5222a4e2ce02)) + (net 154 "/PA 70MHz/VG_5V") (pintype "passive") (tstamp ec4ce95b-bf8c-4040-8eb4-5222a4e2ce02)) (pad "2" smd roundrect (at 1.5625 0) (size 1.325 1.8) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) (net 2 "GND") (pintype "passive") (tstamp 974c2bae-ec8e-4086-8f02-826b01ac193d)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1206_3216Metric.wrl" @@ -18601,7 +18867,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp b26c05ec-265b-489d-b08c-520108ec6ccd) - (at 214.462 -33.672) + (at 104.226 -23.258) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -18635,7 +18901,7 @@ (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp e68b1d7b-7182-4a3f-a3ec-629650c9423a)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 130 "Net-(C121-Pad1)") (pintype "passive") (tstamp 280201bd-9b4e-4e48-9754-955cc4deb1c1)) + (net 129 "Net-(C121-Pad1)") (pintype "passive") (tstamp 280201bd-9b4e-4e48-9754-955cc4deb1c1)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -18645,7 +18911,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp b325ef1c-d200-4559-b6b7-ecffacee16a9) - (at 154.305 81.915) + (at 158.885 81.859) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -18706,7 +18972,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 4ab7bd69-00c7-485f-971b-19cd06a7afb4)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 328 "Net-(R103-Pad2)") (pintype "passive") (tstamp 50d5b58c-39b5-49ec-b021-82c3ddef6bed)) + (net 327 "Net-(R103-Pad2)") (pintype "passive") (tstamp 50d5b58c-39b5-49ec-b021-82c3ddef6bed)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -18716,7 +18982,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp b38865aa-1c8a-4712-b4fd-027f47de08ff) - (at 378.184 -56.514) + (at 172.825 199.391) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM188R71H104KA93D") @@ -18750,7 +19016,7 @@ (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 06b544ee-f94a-4540-b3b4-ee61792f3644)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 141 "VGG1") (pintype "passive") (tstamp c3187f8e-a568-4a4f-8247-d85853e4ac9d)) + (net 140 "VGG1") (pintype "passive") (tstamp c3187f8e-a568-4a4f-8247-d85853e4ac9d)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -18791,9 +19057,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 36942ba9-0281-4dca-9f30-3eab0ebd0623)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 4a771680-537d-4e65-862f-afffbeb0c40c)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 344 "Net-(R168-Pad1)") (pintype "passive") (tstamp 54805a01-2c21-44ec-b5fb-c08cf88f5637)) + (net 343 "Net-(R168-Pad1)") (pintype "passive") (tstamp 54805a01-2c21-44ec-b5fb-c08cf88f5637)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 345 "/Control on separate board/ENC_BTN") (pintype "passive") (tstamp 9b624be2-91ce-4bff-98c9-698d6dcbeef3)) + (net 344 "/Control on separate board/ENC_BTN") (pintype "passive") (tstamp 9b624be2-91ce-4bff-98c9-698d6dcbeef3)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -18803,7 +19069,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp b3aef198-472f-457c-818c-966f61e260ee) - (at 224.405 73.235 180) + (at 63.003 164.675 180) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A680GXAPW1BC") @@ -18884,7 +19150,7 @@ (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 92 "Net-(C78-Pad1)") (pinfunction "B") (pintype "input") (tstamp 394d03b7-7b66-4f5e-8019-0fccdd5c8934)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 310 "Net-(Q18-Pad2)") (pinfunction "E") (pintype "passive") (tstamp a0838fb0-65fb-4b1e-9654-9822a65d6564)) + (net 309 "Net-(Q18-Pad2)") (pinfunction "E") (pintype "passive") (tstamp a0838fb0-65fb-4b1e-9654-9822a65d6564)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 85 "Net-(C72-Pad1)") (pinfunction "C") (pintype "passive") (tstamp bf325f4e-9430-4200-9533-fe1249525306)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" @@ -18896,7 +19162,7 @@ (footprint "Crystal:Crystal_HC49-U_Vertical" (layer "F.Cu") (tedit 5A1AD3B8) (tstamp b478b7c9-04f0-4c88-9399-bce7dc17f125) - (at 213.065 51.11) + (at 51.663 142.55) (descr "Crystal THT HC-49/U http://5hertz.com/pdfs/04404_D.pdf") (tags "THT crystalHC-49/U") (property "MPN" "ECS-110.5-32-1X") @@ -19049,7 +19315,7 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp d40b8658-d601-4452-8a73-50d3cdec3ace)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp f8d0d607-679d-42e0-b5ed-38974d7fa841)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 327 "Net-(R93-Pad1)") (pintype "passive") (tstamp b624b25a-a920-473a-951a-883295eb496f)) + (net 326 "Net-(R93-Pad1)") (pintype "passive") (tstamp b624b25a-a920-473a-951a-883295eb496f)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp c50d381f-2227-45cd-bfce-174075bf257d)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -19061,7 +19327,7 @@ (footprint "Crystal:Crystal_HC49-U_Vertical" (layer "F.Cu") (tedit 5A1AD3B8) (tstamp b68556e4-727c-425e-906c-31c685ee7d45) - (at 217.965 44.76 180) + (at 56.563 136.2 180) (descr "Crystal THT HC-49/U http://5hertz.com/pdfs/04404_D.pdf") (tags "THT crystalHC-49/U") (property "MPN" "ECS-110.5-32-1X") @@ -19111,7 +19377,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp b6de033f-3c62-4a3c-bc71-d8098e85a32c) - (at 206.625 41.485) + (at 45.223 132.925) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "") @@ -19183,7 +19449,7 @@ (footprint "Package_TO_SOT_SMD:SOT-23_Handsoldering" (layer "F.Cu") (tedit 5A0AB76C) (tstamp b748fc5f-a1f1-42cc-8852-99bc1f02bd78) - (at 28.49 -39.12) + (at -104.52 60.986) (descr "SOT-23, Handsoldering") (tags "SOT-23") (property "MPN" "BAT18") @@ -19218,7 +19484,7 @@ (fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp b79a726d-bca7-4863-8eda-69718ae9489b)) (fp_line (start -0.7 1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp b9e5f67b-7d62-413f-90f6-0fa6d13c8edc)) (pad "1" smd rect (at -1.5 -0.95) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 172 "Net-(D2-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 16c3228f-ec1c-4414-b8af-4d793fb11a72)) + (net 171 "Net-(D2-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 16c3228f-ec1c-4414-b8af-4d793fb11a72)) (pad "2" smd rect (at -1.5 0.95) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp 7fbb0240-36a5-4a83-b37a-cc8d3e3b7c77)) (pad "3" smd rect (at 1.5 0) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") (net 20 "Net-(C17-Pad2)") (pinfunction "K") (pintype "passive") (tstamp e91370bc-a499-4fca-8691-d73a5e5bb0d6)) @@ -19231,7 +19497,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp b76c45da-019b-4571-b4a2-3bf1590392f7) - (at 334.974 -20.664) + (at 129.615 235.241) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "885612007040/VJ0805A102GXXPW1BC") @@ -19263,9 +19529,9 @@ (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp eaf93349-eb14-46cc-b6b3-1af397397c20)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp f747f500-feb8-41dc-bb49-210929dd9d1f)) (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 144 "Net-(C143-Pad1)") (pintype "passive") (tstamp 14664d55-3d83-4667-89f6-7c2bcfa740ed)) + (net 143 "Net-(C143-Pad1)") (pintype "passive") (tstamp 14664d55-3d83-4667-89f6-7c2bcfa740ed)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 145 "Net-(C143-Pad2)") (pintype "passive") (tstamp d5847c5f-7a0e-4492-a0f2-14d8afcc0ecb)) + (net 144 "Net-(C143-Pad2)") (pintype "passive") (tstamp d5847c5f-7a0e-4492-a0f2-14d8afcc0ecb)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -19306,9 +19572,9 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp ca78a05b-8667-469a-a438-fbce8c665771)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp d1a499b1-1620-4dfc-b7f7-92a9194788d0)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 327 "Net-(R93-Pad1)") (pintype "passive") (tstamp 6482b198-467a-4e66-b500-894a17ada67f)) + (net 326 "Net-(R93-Pad1)") (pintype "passive") (tstamp 6482b198-467a-4e66-b500-894a17ada67f)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 255 "/Baseband/VHF_IN") (pintype "passive") (tstamp a05a7c7d-b23f-4954-a106-a55fbcbb8199)) + (net 254 "/Baseband/VHF_IN") (pintype "passive") (tstamp a05a7c7d-b23f-4954-a106-a55fbcbb8199)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -19349,7 +19615,7 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 835242f5-f174-4abf-9bb7-bf346d37a30f)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c340b451-c087-472a-a2a9-0025706ec8f5)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 263 "+VTX") (pintype "passive") (tstamp 3a324e59-6d5c-4af7-8c6f-973830f03797)) + (net 262 "+VTX") (pintype "passive") (tstamp 3a324e59-6d5c-4af7-8c6f-973830f03797)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 64 "Net-(C54-Pad2)") (pintype "passive") (tstamp 30b1636d-5038-404e-9c31-7b9af86b1744)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -19361,7 +19627,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp b89cc071-0271-4024-9b30-36e052fb8e69) - (at 73 -21.09) + (at -60.01 79.016) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -19442,13 +19708,13 @@ (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "AA") (pintype "passive") (tstamp fe3982f6-b980-4252-bff9-d0cff6ef2d08)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 326 "Net-(R36-Pad1)") (pinfunction "AB") (pintype "passive") (tstamp 512ca092-a3e0-4c57-935b-57a04bc3c68e)) + (net 325 "Net-(R36-Pad1)") (pinfunction "AB") (pintype "passive") (tstamp 512ca092-a3e0-4c57-935b-57a04bc3c68e)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 175 "Net-(D6-Pad1)") (pinfunction "SA") (pintype "passive") (tstamp 0e51e140-c255-49d4-a555-9f6b405389c0)) + (net 174 "Net-(D6-Pad1)") (pinfunction "SA") (pintype "passive") (tstamp 0e51e140-c255-49d4-a555-9f6b405389c0)) (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 48 "Net-(C44-Pad2)") (pinfunction "SC") (pintype "passive") (tstamp 77eaa4f4-e461-4ac0-afac-89a06fea38da)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 176 "Net-(D6-Pad2)") (pinfunction "SB") (pintype "passive") (tstamp 88610715-ae63-4daf-98e1-69d9d4db58c6)) + (net 175 "Net-(D6-Pad2)") (pinfunction "SB") (pintype "passive") (tstamp 88610715-ae63-4daf-98e1-69d9d4db58c6)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x05_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -19502,7 +19768,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp ba9d8140-66ec-4818-9a27-3daa85b42cf4) - (at 223.302 -39.572) + (at 113.066 -29.158) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -19534,9 +19800,9 @@ (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 93073c50-ce5a-410a-8dcf-3b47248b9faa)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp b4a421a8-00a9-4c98-99ff-0febdad78fdc)) (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 121 "Net-(C112-Pad1)") (pintype "passive") (tstamp 249c8d16-371f-493e-824a-12dea39e3d99)) + (net 120 "Net-(C112-Pad1)") (pintype "passive") (tstamp 249c8d16-371f-493e-824a-12dea39e3d99)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 122 "Net-(C112-Pad2)") (pintype "passive") (tstamp 193805ae-5321-4f92-9e3c-c66e741c0cc4)) + (net 121 "Net-(C112-Pad2)") (pintype "passive") (tstamp 193805ae-5321-4f92-9e3c-c66e741c0cc4)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -19622,7 +19888,7 @@ (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 69 "Net-(C58-Pad1)") (pintype "passive") (tstamp 6da7c192-d345-473b-b999-cc0136b0ddca)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 177 "Net-(D7-Pad2)") (pintype "passive") (tstamp 1afa24da-be67-4a54-bcf6-39f904b68cc8)) + (net 176 "Net-(D7-Pad2)") (pintype "passive") (tstamp 1afa24da-be67-4a54-bcf6-39f904b68cc8)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -19665,7 +19931,7 @@ (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp ae50467c-ae50-44e9-bcac-875e3dc69729)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 326 "Net-(R36-Pad1)") (pintype "passive") (tstamp a78a918e-4856-4725-8303-a2e5d6102994)) + (net 325 "Net-(R36-Pad1)") (pintype "passive") (tstamp a78a918e-4856-4725-8303-a2e5d6102994)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -19744,17 +20010,17 @@ (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_2") (pintype "passive") (tstamp 06af4f29-1334-4f03-834a-6ba346b89bf7)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 255 "/Baseband/VHF_IN") (pinfunction "Pin_3") (pintype "passive") (tstamp b4e7ad15-6d5d-47c3-a5e8-59ce5d21a310)) + (net 254 "/Baseband/VHF_IN") (pinfunction "Pin_3") (pintype "passive") (tstamp b4e7ad15-6d5d-47c3-a5e8-59ce5d21a310)) (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_4") (pintype "passive") (tstamp d8ed5592-7c78-4d4d-8004-ece00aa8a52c)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 256 "/Baseband/VHF_OUT") (pinfunction "Pin_5") (pintype "passive") (tstamp 07216cc4-62f5-40fb-bd73-0eee47932cea)) + (net 255 "/Baseband/VHF_OUT") (pinfunction "Pin_5") (pintype "passive") (tstamp 07216cc4-62f5-40fb-bd73-0eee47932cea)) (pad "6" thru_hole oval (at 0 12.7) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_6") (pintype "passive") (tstamp d1ef85ef-9908-4749-bb63-0afb85db2b56)) (pad "7" thru_hole oval (at 0 15.24) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 244 "/EN_VRX") (pinfunction "Pin_7") (pintype "passive") (tstamp 4a3e648a-b65d-4835-be9c-6fcdc9562a1b)) + (net 243 "/EN_VRX") (pinfunction "Pin_7") (pintype "passive") (tstamp 4a3e648a-b65d-4835-be9c-6fcdc9562a1b)) (pad "8" thru_hole oval (at 0 17.78) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 245 "/EN_VTX") (pinfunction "Pin_8") (pintype "passive") (tstamp 04c0d9e9-27de-4008-8d59-b072fee6defb)) + (net 244 "/EN_VTX") (pinfunction "Pin_8") (pintype "passive") (tstamp 04c0d9e9-27de-4008-8d59-b072fee6defb)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x08_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -19807,7 +20073,7 @@ (footprint "Package_TO_SOT_SMD:SOT-23" (layer "F.Cu") (tedit 5FA16958) (tstamp bd1df752-e9d9-4246-8653-aeae1a9bb4f4) - (at 199.172 -33.982) + (at 254.254 -9.779 180) (descr "SOT, 3 Pin (https://www.jedec.org/system/files/docs/to-236h.pdf variant AB), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "SOT TO_SOT_SMD") (property "MPN" "BSV52LT1G") @@ -19841,12 +20107,12 @@ (fp_line (start 0.65 1.45) (end -0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp 450ef590-be09-40ea-9377-c438e1283715)) (fp_line (start -0.65 1.45) (end -0.65 -1.125) (layer "F.Fab") (width 0.1) (tstamp 5bc74270-9afb-4638-a127-784baaf4ce03)) (fp_line (start -0.65 -1.125) (end -0.325 -1.45) (layer "F.Fab") (width 0.1) (tstamp 646ad113-1772-4925-bd1c-b838db78ef4f)) - (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 129 "Net-(C120-Pad2)") (pinfunction "B") (pintype "input") (tstamp 5017a454-8496-49e6-9db2-8af803ca3778)) - (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 135 "Net-(C129-Pad1)") (pinfunction "E") (pintype "passive") (tstamp 21a52042-4d24-4eb7-a649-fd2855f86e2b)) - (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 134 "Net-(C128-Pad2)") (pinfunction "C") (pintype "passive") (tstamp 8237def6-11b9-4fb1-82e2-4f18fb98e8bd)) + (pad "1" smd roundrect (at -0.9375 -0.95 180) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 128 "Net-(C120-Pad2)") (pinfunction "B") (pintype "input") (tstamp 5017a454-8496-49e6-9db2-8af803ca3778)) + (pad "2" smd roundrect (at -0.9375 0.95 180) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 134 "Net-(C129-Pad1)") (pinfunction "E") (pintype "passive") (tstamp 21a52042-4d24-4eb7-a649-fd2855f86e2b)) + (pad "3" smd roundrect (at 0.9375 0 180) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 133 "Net-(C128-Pad2)") (pinfunction "C") (pintype "passive") (tstamp 8237def6-11b9-4fb1-82e2-4f18fb98e8bd)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -19930,9 +20196,9 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp f798f125-ec21-423b-b562-aaf0cb028ff3)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp fc63efc6-6ba2-4bb7-a135-191786e5ba81)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 340 "/Control on separate board/BTN0") (pintype "passive") (tstamp c9adb598-2c9e-4820-a1ba-93e10d76ed65)) + (net 339 "/Control on separate board/BTN0") (pintype "passive") (tstamp c9adb598-2c9e-4820-a1ba-93e10d76ed65)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 54c38852-39cb-48b7-b7eb-4a24e09c8ff2)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 54c38852-39cb-48b7-b7eb-4a24e09c8ff2)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -19965,12 +20231,12 @@ (fp_circle (center 0 0) (end 0 0.95) (layer "F.SilkS") (width 0.12) (fill none) (tstamp 0c1eb8f7-29cc-4c3a-9e54-5b8543639126)) (fp_circle (center 0 0) (end 1.25 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp 6c9bb5b7-42cf-4ab3-bde3-72f6030f11e7)) (pad "1" smd circle (at 0 0) (size 1.5 1.5) (layers "F.Cu" "F.Mask") - (net 323 "Net-(R31-Pad1)") (pinfunction "1") (pintype "passive") (tstamp e1b61ab3-5898-4f6b-b36c-57bec00745bd)) + (net 322 "Net-(R31-Pad1)") (pinfunction "1") (pintype "passive") (tstamp e1b61ab3-5898-4f6b-b36c-57bec00745bd)) ) (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp be0297d0-eb1e-4870-95dc-58cd37d26568) - (at 121.66 -70.55) + (at -11.35 29.556) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM188R71H104KA93D") @@ -20014,7 +20280,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp be709ea7-2ee1-4c7f-bbee-e503b99438b7) - (at 241.682 -56.232) + (at 148.082 -26.416 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -20023,15 +20289,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/86e5b00b-d1af-4cab-b937-1bf742e58ee2") (attr smd) - (fp_text reference "C100" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "C100" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp ee5a6b1d-a61d-48f1-b905-4045a324fa70) ) - (fp_text value "18pF" (at 0 1.43) (layer "F.Fab") + (fp_text value "18pF" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 28215b52-d3bc-4f94-b0ac-41ba113fbebb) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 0f5b15bd-370a-4981-b1fb-56ab6200d2c4) ) @@ -20045,10 +20311,10 @@ (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 86cc806e-3155-41f2-9789-13e4b3a5c5e1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp a6f901e6-83de-415d-ba85-16e68548fc66)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp b7209349-b175-476c-b02c-5a1af5521db9)) - (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 104 "Net-(C100-Pad1)") (pintype "passive") (tstamp 569dbf4e-38c8-452f-9072-b4c68392ca32)) - (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 110 "Net-(C100-Pad2)") (pintype "passive") (tstamp 52057ca6-d70b-4683-89b4-75951e2ccb51)) + (pad "1" smd roundrect (at -0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 2 "GND") (pintype "passive") (tstamp 569dbf4e-38c8-452f-9072-b4c68392ca32)) + (pad "2" smd roundrect (at 0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 109 "Net-(C100-Pad2)") (pintype "passive") (tstamp 52057ca6-d70b-4683-89b4-75951e2ccb51)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -20058,7 +20324,7 @@ (footprint "Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical" (layer "F.Cu") (tedit 59FED5CC) (tstamp bf032066-0236-429c-a0ea-2158e48d5da1) - (at 217.79 26.98 -90) + (at 56.388 118.42 -90) (descr "Through hole straight pin header, 1x03, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x03 2.54mm single row") (property "Description" "") @@ -20099,7 +20365,7 @@ (pad "1" thru_hole rect (at 0 0 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 83 "Net-(C70-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 4d709d6d-b99f-45af-b1d5-eb20153d8661)) (pad "2" thru_hole oval (at 0 2.54 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 264 "Net-(J24-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 51e5a222-732d-466b-b88c-1efac53dd4b4)) + (net 263 "Net-(J24-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 51e5a222-732d-466b-b88c-1efac53dd4b4)) (pad "3" thru_hole oval (at 0 5.08 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "3") (pintype "passive") (tstamp 5f2c9884-e5e8-4e5e-817e-4ed0173fa40c)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x03_P2.54mm_Vertical.wrl" @@ -20111,7 +20377,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp c02bb9f5-6d49-4f33-a091-d662c8b21f01) - (at 339.554 -22.154) + (at 134.195 233.751) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -20145,7 +20411,7 @@ (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp f3918cc7-1bc7-482d-89a8-26ee0d0b3bf2)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 157 "Net-(C156-Pad2)") (pintype "passive") (tstamp a68934ff-a439-43d0-b847-3234d05ad737)) + (net 156 "Net-(C156-Pad2)") (pintype "passive") (tstamp a68934ff-a439-43d0-b847-3234d05ad737)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -20186,9 +20452,9 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp d6692648-b450-4450-aaaa-c505baecc30a)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e8f4ae4b-efe5-443e-a910-760ae4aa090e)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 329 "Net-(R104-Pad2)") (pintype "passive") (tstamp 0e4f979c-c4d8-4df2-be72-0722889dbcaf)) + (net 328 "Net-(R104-Pad2)") (pintype "passive") (tstamp 0e4f979c-c4d8-4df2-be72-0722889dbcaf)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 287 "/LO1") (pintype "passive") (tstamp 113cd952-ef20-41d0-ba16-87f7efe3fd07)) + (net 286 "/LO1") (pintype "passive") (tstamp 113cd952-ef20-41d0-ba16-87f7efe3fd07)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -20198,7 +20464,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp c17f698d-2f67-4f49-94a4-90c0f59ea5a1) - (at 204.022 -34.702) + (at 172.72 -25.4 -90) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A103KXJTBC") @@ -20207,15 +20473,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/63b0f106-6c46-495c-b465-68998431a2ba") (attr smd) - (fp_text reference "C108" (at 0 -1.68) (layer "F.SilkS") + (fp_text reference "C108" (at 0 -1.68 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 0df3f379-f82c-4783-b4a6-9d6ea95c32ed) ) - (fp_text value "10nF" (at 0 1.68) (layer "F.Fab") + (fp_text value "10nF" (at 0 1.68 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp b66a90bc-d2f7-48df-b3ef-46fdd0244cd7) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.08))) (tstamp 2813ff5d-cebb-4eb7-a231-be9b6f381f8f) ) @@ -20229,9 +20495,9 @@ (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp 3859dde5-03f6-4712-9a28-c60cdfc4451e)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp b3611f2f-ee09-4802-8a2e-8f8691aedaba)) (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp f0947dec-3e97-4dd5-ab4d-f35d1e71e159)) - (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 117 "Net-(C108-Pad1)") (pintype "passive") (tstamp de016cab-4185-4e07-85ea-d5c3c2f0eeb6)) - (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (pad "1" smd roundrect (at -1.0375 0 270) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 116 "Net-(C108-Pad1)") (pintype "passive") (tstamp de016cab-4185-4e07-85ea-d5c3c2f0eeb6)) + (pad "2" smd roundrect (at 1.0375 0 270) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 074bc40f-04c8-46b2-8a4e-eaeff55df3dd)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) @@ -20242,7 +20508,7 @@ (footprint "Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical" (layer "F.Cu") (tedit 59FED5CC) (tstamp c1b5e5db-9b08-4b5a-81a4-99240067b723) - (at 84.02 -56.79) + (at -48.99 43.316) (descr "Through hole straight pin header, 1x02, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x02 2.54mm single row") (property "Need_order" "0") @@ -20278,7 +20544,7 @@ (fp_line (start -1.27 3.81) (end -1.27 -0.635) (layer "F.Fab") (width 0.1) (tstamp dfd8f9b4-4a37-4a4c-ba4b-dcbbead47b6a)) (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp fc47285c-0dca-4895-bb84-57bca04c027a)) (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 161 "/PA 70MHz/PA_OUT") (pinfunction "In") (pintype "passive") (tstamp 74fab0e6-e7bb-4175-b12d-d0ea6ba7f7e2)) + (net 160 "/PA 70MHz/PA_OUT") (pinfunction "In") (pintype "passive") (tstamp 74fab0e6-e7bb-4175-b12d-d0ea6ba7f7e2)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Ext") (pintype "passive") (tstamp 33a39c4f-c857-4ff7-9754-8ef392e83d5d)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl" @@ -20290,7 +20556,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp c21c8432-8836-4917-a2f1-4f03464c82ff) - (at 73 -23.6) + (at -60.01 76.506) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM188R71H104KA93D") @@ -20334,7 +20600,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp c2706feb-a699-450c-a91a-a4ef479099af) - (at 224.405 60.535 180) + (at 63.003 151.975 180) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A680GXAPW1BC") @@ -20378,7 +20644,7 @@ (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp c2e0e6ce-1646-4c71-9bc8-5b76cac5a634) - (at 232.782 -58.022) + (at 143.764 -26.416 90) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -20386,15 +20652,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/66ee743e-2f34-494a-9dcd-976027b89cea") (attr smd) - (fp_text reference "R109" (at 0 -1.65) (layer "F.SilkS") + (fp_text reference "R109" (at 0 -1.65 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 55878bab-ff72-4673-b438-074748f3d2c6) ) - (fp_text value "DNF" (at 0 1.65) (layer "F.Fab") + (fp_text value "DNF" (at 0 1.65 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp d4b97888-6bd4-4bec-8870-04c5f0535dd8) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.08))) (tstamp dcb70daf-cea1-4446-a21d-28185eb7297b) ) @@ -20408,10 +20674,10 @@ (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 3d2a749e-177f-4966-bc0e-de2073ce866c)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 5abab90a-0a41-4eb8-afe1-4a736a1889ab)) (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp 68d12ed9-ea25-4057-9eb5-c8233005fd46)) - (pad "1" smd roundrect (at -1 0) (size 1.2 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.208333) - (net 292 "Net-(L23-Pad2)") (pintype "passive") (tstamp 66f0e0db-58a0-40b8-bcb7-592a6f9d6831)) - (pad "2" smd roundrect (at 1 0) (size 1.2 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.208333) - (net 104 "Net-(C100-Pad1)") (pintype "passive") (tstamp df39f159-4022-4529-936a-63acb18776ad)) + (pad "1" smd roundrect (at -1 0 90) (size 1.2 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.208333) + (net 291 "Net-(L23-Pad2)") (pintype "passive") (tstamp 66f0e0db-58a0-40b8-bcb7-592a6f9d6831)) + (pad "2" smd roundrect (at 1 0 90) (size 1.2 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.208333) + (net 2 "GND") (pintype "passive") (tstamp df39f159-4022-4529-936a-63acb18776ad)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -20452,9 +20718,9 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 47090056-8eba-4898-a565-36a0a652c2e3)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 52bae117-969f-4d41-83f2-6dbb57f83855)) (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 328 "Net-(R103-Pad2)") (pintype "passive") (tstamp f5a2ae6d-70d5-43f5-a044-0667565b49f5)) + (net 327 "Net-(R103-Pad2)") (pintype "passive") (tstamp f5a2ae6d-70d5-43f5-a044-0667565b49f5)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 329 "Net-(R104-Pad2)") (pintype "passive") (tstamp 38186e2d-90b3-447d-8046-d207004d05ef)) + (net 328 "Net-(R104-Pad2)") (pintype "passive") (tstamp 38186e2d-90b3-447d-8046-d207004d05ef)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -20501,13 +20767,13 @@ (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp d092771c-6e58-4192-90f8-891ddc7f89c9)) (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp f27f38f1-4445-40b3-8380-e9d232a89730)) (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 268 "/Control on separate board/DISP_LAT") (pinfunction "Pin_1") (pintype "passive+no_connect") (tstamp 76ddc5e0-70bf-4d31-a5db-f5d335de67ac)) + (net 267 "/Control on separate board/DISP_LAT") (pinfunction "Pin_1") (pintype "passive+no_connect") (tstamp 76ddc5e0-70bf-4d31-a5db-f5d335de67ac)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 269 "/Control on separate board/I2C2_SDA") (pinfunction "Pin_2") (pintype "passive") (tstamp 9865ea0c-b515-40d9-8497-581e17f6c4d7)) + (net 268 "/Control on separate board/I2C2_SDA") (pinfunction "Pin_2") (pintype "passive") (tstamp 9865ea0c-b515-40d9-8497-581e17f6c4d7)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 270 "/Control on separate board/I2C2_SCL") (pinfunction "Pin_3") (pintype "passive") (tstamp dd3e8a71-04a2-4230-b1c6-f7a1efd9cb2c)) + (net 269 "/Control on separate board/I2C2_SCL") (pinfunction "Pin_3") (pintype "passive") (tstamp dd3e8a71-04a2-4230-b1c6-f7a1efd9cb2c)) (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 171 "/Control on separate board/5V") (pinfunction "Pin_4") (pintype "passive") (tstamp 4a971764-6f9e-4fbc-be36-7fb92ad65721)) + (net 170 "/Control on separate board/5V") (pinfunction "Pin_4") (pintype "passive") (tstamp 4a971764-6f9e-4fbc-be36-7fb92ad65721)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_5") (pintype "passive") (tstamp 3120cb3a-9163-48f4-b4c4-2a6e97218727)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x05_P2.54mm_Vertical.wrl" @@ -20519,7 +20785,7 @@ (footprint "Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp c3f1d13e-0932-4d7a-bd34-254ceff3752b) - (at 227.972 -55.012) + (at 139.192 -31.242) (descr "Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2BASR33G00L") @@ -20551,9 +20817,9 @@ (fp_line (start -1 -0.6) (end 1 -0.6) (layer "F.Fab") (width 0.1) (tstamp c37e7fdd-9440-4271-be6d-1b987cde521a)) (fp_line (start 1 0.6) (end -1 0.6) (layer "F.Fab") (width 0.1) (tstamp fa197a8f-0dac-4f98-82c0-8609ee0f7517)) (pad "1" smd roundrect (at -1.025 0) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 106 "Net-(C93-Pad1)") (pinfunction "1") (pintype "passive") (tstamp dddf4dd5-aff3-49af-bc7e-846da99b0c41)) + (net 105 "Net-(C93-Pad1)") (pinfunction "1") (pintype "passive") (tstamp dddf4dd5-aff3-49af-bc7e-846da99b0c41)) (pad "2" smd roundrect (at 1.025 0) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 291 "Net-(L21-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 017a4c9b-4221-476d-a78f-ac64a9b9de3b)) + (net 290 "Net-(L21-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 017a4c9b-4221-476d-a78f-ac64a9b9de3b)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -20600,7 +20866,7 @@ (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 80 "Net-(C68-Pad1)") (pinfunction "B") (pintype "input") (tstamp b7f3c457-6efe-4ab2-a9bf-ea819f1b8870)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 309 "Net-(Q16-Pad2)") (pinfunction "E") (pintype "passive") (tstamp 176a8347-fa6d-4cdb-9569-77cf428f690e)) + (net 308 "Net-(Q16-Pad2)") (pinfunction "E") (pintype "passive") (tstamp 176a8347-fa6d-4cdb-9569-77cf428f690e)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 76 "Net-(C65-Pad1)") (pinfunction "C") (pintype "passive") (tstamp a0cac205-e77e-4a74-9d38-fe589632a3cf)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" @@ -20612,7 +20878,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp c517c3ba-95ce-4439-9b6a-2038cd3bbbaa) - (at 237.332 -56.802) + (at 197.104 -7.366) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -20644,9 +20910,9 @@ (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 9c8121ae-37b1-4b4a-9371-eab95d5fd2d2)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp b0136e44-66a4-4268-b4af-df2155aad0c8)) (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 107 "/70MHz VHF Frontend/TX_FROM_MIX") (pintype "passive") (tstamp da1b3779-7807-423b-9112-42a9fc27c07d)) + (net 106 "/70MHz VHF Frontend/TX_FROM_MIX") (pintype "passive") (tstamp da1b3779-7807-423b-9112-42a9fc27c07d)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 108 "Net-(C94-Pad2)") (pintype "passive") (tstamp 37f216c2-fc5f-4acf-8202-eb186f71548b)) + (net 107 "Net-(C94-Pad2)") (pintype "passive") (tstamp 37f216c2-fc5f-4acf-8202-eb186f71548b)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -20699,7 +20965,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp c59f0167-01e9-4664-bff1-0b9b1e60cc4c) - (at 46.9 -13.16) + (at -86.11 86.946) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A103KXJTBC") @@ -20776,7 +21042,7 @@ (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 95 "Net-(C81-Pad1)") (pintype "passive") (tstamp b64aa7e2-c091-450c-a3de-39b138b5083b)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 312 "Net-(Q21-Pad1)") (pintype "passive") (tstamp 45a4130a-903d-4935-9bf9-c8ee63ca8b77)) + (net 311 "Net-(Q21-Pad1)") (pintype "passive") (tstamp 45a4130a-903d-4935-9bf9-c8ee63ca8b77)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -20818,9 +21084,9 @@ (fp_arc (start -1.23 -1.469694) (mid 4.17 0.000016) (end -1.230016 1.469666) (layer "F.Fab") (width 0.1) (tstamp 362a5144-d6cf-40c7-b71d-7c2b76811c0a)) (fp_circle (center 1.27 0) (end 3.77 0) (layer "F.Fab") (width 0.1) (fill none) (tstamp 1197e6c5-6660-4887-9362-13f4c8ed0143)) (pad "1" thru_hole rect (at 0 0) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask) - (net 197 "/Control on separate board/STATUSn") (pinfunction "K") (pintype "passive") (tstamp 67b7288d-032e-4b6a-9470-965da24d8080)) + (net 196 "/Control on separate board/STATUSn") (pinfunction "K") (pintype "passive") (tstamp 67b7288d-032e-4b6a-9470-965da24d8080)) (pad "2" thru_hole circle (at 2.54 0) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask) - (net 198 "Net-(D23-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 0ff68b6d-105d-43ac-9d64-4621c4f443f1)) + (net 197 "Net-(D23-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 0ff68b6d-105d-43ac-9d64-4621c4f443f1)) (model "${KICAD6_3DMODEL_DIR}/LED_THT.3dshapes/LED_D5.0mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -20830,7 +21096,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp c6246caf-36a4-4096-94e3-6d4503a1faf0) - (at 358.714 -37.794) + (at 153.355 218.111) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM188R71H104KA93D") @@ -20864,7 +21130,7 @@ (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 1ece7a4d-8d8f-4c82-a4e3-befb1044f103)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 155 "/PA 70MHz/VG_5V") (pintype "passive") (tstamp 3c405e80-eb17-4483-b51d-536c3e4d0f50)) + (net 154 "/PA 70MHz/VG_5V") (pintype "passive") (tstamp 3c405e80-eb17-4483-b51d-536c3e4d0f50)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -20874,7 +21140,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp c64e7078-d061-488b-92ca-9e9d17537558) - (at 214.202 -36.182) + (at 103.966 -25.768) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -20905,9 +21171,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp ddc2886b-10dd-4904-a95f-d6126b69c1ed)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp e6fad2bd-4fe6-45c3-9b25-c7b1a7ea1485)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 315 "/70MHz VHF Frontend/+9V_FE") (pintype "passive") (tstamp 6baa81d4-7b97-4e91-8b42-2ecb6a87f394)) + (net 314 "/70MHz VHF Frontend/+9V_FE") (pintype "passive") (tstamp 6baa81d4-7b97-4e91-8b42-2ecb6a87f394)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 127 "Net-(C119-Pad1)") (pintype "passive") (tstamp b9a4d3ba-99e6-44bf-b0aa-b3a570c58ae5)) + (net 126 "Net-(C119-Pad1)") (pintype "passive") (tstamp b9a4d3ba-99e6-44bf-b0aa-b3a570c58ae5)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -20952,7 +21218,7 @@ (fp_line (start -0.65 -1.125) (end -0.325 -1.45) (layer "F.Fab") (width 0.1) (tstamp c958f95b-021f-4e60-9992-64b37fb15dad)) (fp_line (start -0.325 -1.45) (end 0.65 -1.45) (layer "F.Fab") (width 0.1) (tstamp cd4b4b3c-0802-44e8-94b5-ed1d5e9982f6)) (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 310 "Net-(Q18-Pad2)") (pinfunction "D") (pintype "passive") (tstamp 50cc3888-50f0-42b8-b56c-23443e55faa8)) + (net 309 "Net-(Q18-Pad2)") (pinfunction "D") (pintype "passive") (tstamp 50cc3888-50f0-42b8-b56c-23443e55faa8)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 87 "Net-(C73-Pad2)") (pinfunction "S") (pintype "passive") (tstamp 360d0504-30ea-48c5-9568-357fad94a9ad)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) @@ -20966,7 +21232,7 @@ (footprint "mpb:PLD-1.5W" (layer "F.Cu") (tedit 5FBA9FA6) (tstamp c6a40114-e757-4d76-9f8d-5ac6378428ac) - (at 330.259 -47.399) + (at 124.9 208.506) (property "Need_order" "0") (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") @@ -20994,9 +21260,9 @@ (fp_line (start -3.75 -3) (end -2.75 -3) (layer "F.SilkS") (width 0.15) (tstamp d87d7cef-b225-4122-ac71-9a4444e89aff)) (fp_line (start 2.75 -2.75) (end 2.75 -3) (layer "F.SilkS") (width 0.15) (tstamp e9b36344-6534-474a-a14a-c19c985f8644)) (pad "1" smd rect locked (at 0 -3.5) (size 5 3.16) (layers "F.Cu" "F.Paste" "F.Mask") - (net 294 "Net-(L39-Pad2)") (pinfunction "G") (pintype "input") (tstamp 1a4ee0a3-c082-4f94-97c0-0a087bc688ad)) + (net 293 "Net-(L39-Pad2)") (pinfunction "G") (pintype "input") (tstamp 1a4ee0a3-c082-4f94-97c0-0a087bc688ad)) (pad "2" smd rect locked (at 0 3.5) (size 5 3.16) (layers "F.Cu" "F.Paste" "F.Mask") - (net 150 "Net-(C147-Pad2)") (pinfunction "D") (pintype "passive") (tstamp 0d25026e-b98b-4ce5-9c0b-3c4f7678d077)) + (net 149 "Net-(C147-Pad2)") (pinfunction "D") (pintype "passive") (tstamp 0d25026e-b98b-4ce5-9c0b-3c4f7678d077)) (pad "3" thru_hole circle locked (at 3 -0.6) (size 0.6 0.6) (drill 0.5) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "S") (pintype "passive") (tstamp 01564bb0-df5a-483e-a4e1-9f2605b36842)) (pad "3" smd rect locked (at 0 0) (size 8.1 2.25) (layers "F.Cu" "F.Paste" "F.Mask") @@ -21065,7 +21331,7 @@ (fp_line (start 64.2 8.5) (end 64.2 22.5) (layer "F.SilkS") (width 0.12) (tstamp cca7fb1f-7886-45c8-85fa-ba204c229f04)) (fp_line (start -8.13 -2.64) (end -7.34 -2.64) (layer "F.SilkS") (width 0.12) (tstamp d0112992-dd8d-48db-991e-406798b7cd2a)) (fp_line (start -8.14 33.64) (end 72.14 33.64) (layer "F.SilkS") (width 0.12) (tstamp fba883a8-4a74-4301-b921-43b2cb9522fa)) - (fp_arc (start 64.20104 22.49932) (mid 64.054479 22.85315) (end 63.70066 22.9997) (layer "F.SilkS") (width 0.12) (tstamp 5333b943-ce83-473c-84a0-3da323b881cb)) + (fp_arc (start 64.20104 22.49932) (mid 64.054473 22.853115) (end 63.70066 22.9997) (layer "F.SilkS") (width 0.12) (tstamp 5333b943-ce83-473c-84a0-3da323b881cb)) (fp_arc (start -0.29972 8.49884) (mid -0.153162 8.145018) (end 0.20066 7.99846) (layer "F.SilkS") (width 0.12) (tstamp 8a89ab9f-c91f-4995-bd36-d43f7e1e354d)) (fp_arc (start 63.7 8) (mid 64.053553 8.146447) (end 64.2 8.5) (layer "F.SilkS") (width 0.12) (tstamp 99c93122-78d3-4d9d-9cb1-2cf52c400c9c)) (fp_arc (start 0.20066 22.9997) (mid -0.153162 22.853142) (end -0.29972 22.49932) (layer "F.SilkS") (width 0.12) (tstamp d8530cbd-07cd-4517-be0f-c44546371b32)) @@ -21085,37 +21351,37 @@ (pad "" thru_hole circle (at -5.4991 31.0007) (size 3 3) (drill 2.5) (layers *.Cu *.Mask) (tstamp c42dbef2-6531-49ff-8569-0c7ed8bd98d7)) (pad "" thru_hole circle (at 69.49948 31.0007) (size 3 3) (drill 2.5) (layers *.Cu *.Mask) (tstamp dc7bb499-a0d2-4ad1-b176-bedd3c8e05a1)) (pad "1" thru_hole rect (at 0 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 199 "unconnected-(DS1-Pad1)") (pinfunction "VSS") (pintype "power_in+no_connect") (tstamp 1d10fc72-1b13-481d-b732-bfdda665242c)) + (net 198 "unconnected-(DS1-Pad1)") (pinfunction "VSS") (pintype "power_in+no_connect") (tstamp 1d10fc72-1b13-481d-b732-bfdda665242c)) (pad "2" thru_hole oval (at 2.54 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 200 "unconnected-(DS1-Pad2)") (pinfunction "VDD") (pintype "power_in+no_connect") (tstamp 8842548c-b760-402a-91f0-a9406d4dc760)) + (net 199 "unconnected-(DS1-Pad2)") (pinfunction "VDD") (pintype "power_in+no_connect") (tstamp 8842548c-b760-402a-91f0-a9406d4dc760)) (pad "3" thru_hole oval (at 5.08 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 201 "unconnected-(DS1-Pad3)") (pinfunction "VO") (pintype "input+no_connect") (tstamp a917aaa7-7ab4-4c76-ae7f-1b3a5c511e2e)) + (net 200 "unconnected-(DS1-Pad3)") (pinfunction "VO") (pintype "input+no_connect") (tstamp a917aaa7-7ab4-4c76-ae7f-1b3a5c511e2e)) (pad "4" thru_hole oval (at 7.62 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 202 "unconnected-(DS1-Pad4)") (pinfunction "RS") (pintype "input+no_connect") (tstamp 97e2dc91-4ea4-4621-a573-92738459f51f)) + (net 201 "unconnected-(DS1-Pad4)") (pinfunction "RS") (pintype "input+no_connect") (tstamp 97e2dc91-4ea4-4621-a573-92738459f51f)) (pad "5" thru_hole oval (at 10.16 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 203 "unconnected-(DS1-Pad5)") (pinfunction "R/W") (pintype "input+no_connect") (tstamp d3e9d96c-2e4d-4e87-895c-3355325a4e67)) + (net 202 "unconnected-(DS1-Pad5)") (pinfunction "R/W") (pintype "input+no_connect") (tstamp d3e9d96c-2e4d-4e87-895c-3355325a4e67)) (pad "6" thru_hole oval (at 12.7 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 204 "unconnected-(DS1-Pad6)") (pinfunction "E") (pintype "input+no_connect") (tstamp d6c96b3b-3f8d-439c-8283-a72a9b67cfc4)) + (net 203 "unconnected-(DS1-Pad6)") (pinfunction "E") (pintype "input+no_connect") (tstamp d6c96b3b-3f8d-439c-8283-a72a9b67cfc4)) (pad "7" thru_hole oval (at 15.24 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 205 "unconnected-(DS1-Pad7)") (pinfunction "D0") (pintype "input+no_connect") (tstamp 5a03285a-673e-482a-9976-127cc75719e1)) + (net 204 "unconnected-(DS1-Pad7)") (pinfunction "D0") (pintype "input+no_connect") (tstamp 5a03285a-673e-482a-9976-127cc75719e1)) (pad "8" thru_hole oval (at 17.78 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 206 "unconnected-(DS1-Pad8)") (pinfunction "D1") (pintype "input+no_connect") (tstamp 20ae0b46-f94c-41e7-8b80-9a6cb86e64fb)) + (net 205 "unconnected-(DS1-Pad8)") (pinfunction "D1") (pintype "input+no_connect") (tstamp 20ae0b46-f94c-41e7-8b80-9a6cb86e64fb)) (pad "9" thru_hole oval (at 20.32 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 207 "unconnected-(DS1-Pad9)") (pinfunction "D2") (pintype "input+no_connect") (tstamp 974e2148-c5c9-4da1-9025-408f26d64930)) + (net 206 "unconnected-(DS1-Pad9)") (pinfunction "D2") (pintype "input+no_connect") (tstamp 974e2148-c5c9-4da1-9025-408f26d64930)) (pad "10" thru_hole oval (at 22.86 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 208 "unconnected-(DS1-Pad10)") (pinfunction "D3") (pintype "input+no_connect") (tstamp 53607bb3-8f40-487b-aa53-bf0fe57d64d8)) + (net 207 "unconnected-(DS1-Pad10)") (pinfunction "D3") (pintype "input+no_connect") (tstamp 53607bb3-8f40-487b-aa53-bf0fe57d64d8)) (pad "11" thru_hole oval (at 25.4 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 209 "unconnected-(DS1-Pad11)") (pinfunction "D4") (pintype "input+no_connect") (tstamp ae4653cc-7f91-4054-8d6e-e866564a7b08)) + (net 208 "unconnected-(DS1-Pad11)") (pinfunction "D4") (pintype "input+no_connect") (tstamp ae4653cc-7f91-4054-8d6e-e866564a7b08)) (pad "12" thru_hole oval (at 27.94 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 210 "unconnected-(DS1-Pad12)") (pinfunction "D5") (pintype "input+no_connect") (tstamp 6243b824-6ff2-4fbf-8191-488faede0540)) + (net 209 "unconnected-(DS1-Pad12)") (pinfunction "D5") (pintype "input+no_connect") (tstamp 6243b824-6ff2-4fbf-8191-488faede0540)) (pad "13" thru_hole oval (at 30.48 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 211 "unconnected-(DS1-Pad13)") (pinfunction "D6") (pintype "input+no_connect") (tstamp 0578c8ce-fd6b-45a2-a884-7f6114053ae3)) + (net 210 "unconnected-(DS1-Pad13)") (pinfunction "D6") (pintype "input+no_connect") (tstamp 0578c8ce-fd6b-45a2-a884-7f6114053ae3)) (pad "14" thru_hole oval (at 33.02 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 212 "unconnected-(DS1-Pad14)") (pinfunction "D7") (pintype "input+no_connect") (tstamp fcea1626-f680-4ead-9118-c7dc76da2d30)) + (net 211 "unconnected-(DS1-Pad14)") (pinfunction "D7") (pintype "input+no_connect") (tstamp fcea1626-f680-4ead-9118-c7dc76da2d30)) (pad "15" thru_hole oval (at 35.56 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 213 "unconnected-(DS1-Pad15)") (pinfunction "LED(+)") (pintype "power_in+no_connect") (tstamp ebaa10fd-c0ef-4d00-8909-6d4c6b676f63)) + (net 212 "unconnected-(DS1-Pad15)") (pinfunction "LED(+)") (pintype "power_in+no_connect") (tstamp ebaa10fd-c0ef-4d00-8909-6d4c6b676f63)) (pad "16" thru_hole oval (at 38.1 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 214 "unconnected-(DS1-Pad16)") (pinfunction "LED(-)") (pintype "power_in+no_connect") (tstamp 3738d063-19ab-4a99-a9f3-f61e8af8ae45)) + (net 213 "unconnected-(DS1-Pad16)") (pinfunction "LED(-)") (pintype "power_in+no_connect") (tstamp 3738d063-19ab-4a99-a9f3-f61e8af8ae45)) (model "${KICAD6_3DMODEL_DIR}/Display.3dshapes/WC1602A.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -21125,7 +21391,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp c6d709f8-c6e0-4c50-b2ad-4e26ebdeaa6d) - (at 195.58 74.93) + (at 34.178 166.37) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -21153,7 +21419,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp c6e35195-f6c2-4750-91f4-b398c27082d7) - (at 59.55 -35.53) + (at -73.46 64.576) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -21186,7 +21452,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 36 "+VRX") (pintype "passive") (tstamp d4a2c822-4b73-43dd-a052-a8ee6425d3b3)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 366 "Net-(D1-Pad1)") (pintype "passive") (tstamp fe9bc63f-ac05-47e4-a1ad-ccbf31d096a8)) + (net 365 "Net-(D1-Pad1)") (pintype "passive") (tstamp fe9bc63f-ac05-47e4-a1ad-ccbf31d096a8)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -21290,9 +21556,9 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 7e94615f-fe03-4d40-bce6-26e0e0a7c6ae)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e8ff52a3-e513-4bf8-bc84-b9c4a91c1cb3)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 242 "/Control on separate board/SPKR_VOL") (pintype "passive") (tstamp 4fb77e23-2721-428c-a166-21eb998708b1)) + (net 241 "/Control on separate board/SPKR_VOL") (pintype "passive") (tstamp 4fb77e23-2721-428c-a166-21eb998708b1)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 350 "Net-(R178-Pad2)") (pintype "passive") (tstamp 46c2ea7b-106d-4bfc-8b4f-bec7e7e2a930)) + (net 349 "Net-(R178-Pad2)") (pintype "passive") (tstamp 46c2ea7b-106d-4bfc-8b4f-bec7e7e2a930)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -21374,7 +21640,7 @@ (footprint "Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp c9628094-85af-47c1-b157-8d4b331ee836) - (at 227.972 -52.062) + (at 146.812 -31.242) (descr "Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2BASR22J00L") @@ -21406,9 +21672,9 @@ (fp_line (start -1 0.6) (end -1 -0.6) (layer "F.Fab") (width 0.1) (tstamp edd596d8-b468-4a0d-8bb2-4d33480877e3)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer "F.Fab") (width 0.1) (tstamp fafa7054-0cb4-46e1-abfb-a49cea9eca10)) (pad "1" smd roundrect (at -1.025 0) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 293 "Net-(L25-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 2124339f-919f-4b9d-9eab-3fad5bf595a6)) + (net 292 "Net-(L25-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 2124339f-919f-4b9d-9eab-3fad5bf595a6)) (pad "2" smd roundrect (at 1.025 0) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 110 "Net-(C100-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 53dc2c19-399c-4f43-a7b2-b37deacc429e)) + (net 109 "Net-(C100-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 53dc2c19-399c-4f43-a7b2-b37deacc429e)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -21418,7 +21684,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp c99de8e3-0fb0-494c-a901-940494f81543) - (at 195.972 -28.252) + (at 257.302 -9.779 -90) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "885612007040/VJ0805A102GXXPW1BC") @@ -21427,15 +21693,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/db52701f-ec48-41c7-adf4-af014f6d47e1") (attr smd) - (fp_text reference "C129" (at 0 -1.68) (layer "F.SilkS") + (fp_text reference "C129" (at 0 -1.68 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp abecb10c-4865-42f4-94a8-e4288761c8f2) ) - (fp_text value "1nF" (at 0 1.68) (layer "F.Fab") + (fp_text value "1nF" (at 0 1.68 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp f2660d38-456b-4710-8963-bcdc5018f9f2) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.08))) (tstamp 790a963a-0040-4b23-b894-ac3109f730a4) ) @@ -21449,9 +21715,9 @@ (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 197caefb-9b39-45f3-87d1-fac0ec2567e4)) (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp cbe4dac8-7016-435e-a75f-8407587acca9)) (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp db736a88-ea6d-4888-a653-1bed887d47b9)) - (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 135 "Net-(C129-Pad1)") (pintype "passive") (tstamp 9dc278d4-56e2-4c69-8ff7-fb87999b5293)) - (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (pad "1" smd roundrect (at -1.0375 0 270) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 134 "Net-(C129-Pad1)") (pintype "passive") (tstamp 9dc278d4-56e2-4c69-8ff7-fb87999b5293)) + (pad "2" smd roundrect (at 1.0375 0 270) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 2291c21a-173c-4cc8-84fd-d77269172823)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) @@ -21462,7 +21728,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp c9b6e407-6d15-450f-b4f8-fa78488d64de) - (at 93.25 -39.26) + (at -39.76 60.846) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -21495,7 +21761,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 14 "Net-(C14-Pad2)") (pintype "passive") (tstamp a53ae43a-b55e-44e8-8079-e2cf06307df9)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 261 "/CLK1") (pintype "passive") (tstamp b7f25dad-6741-463d-a63c-e9ef08888d66)) + (net 260 "/CLK1") (pintype "passive") (tstamp b7f25dad-6741-463d-a63c-e9ef08888d66)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -21505,7 +21771,7 @@ (footprint "LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF1) (tstamp c9e4a402-3d49-4101-be21-86066dcbd57d) - (at 351.589 -44.784) + (at 146.23 211.121) (descr "LED SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags "LED handsolder") (property "Need_order" "0") @@ -21540,7 +21806,7 @@ (pad "1" smd roundrect (at -1.4875 0) (size 1.425 1.75) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 2 "GND") (pinfunction "K") (pintype "passive") (tstamp 3b9b6d17-aa20-4ea8-ac3d-fd6d150078d1)) (pad "2" smd roundrect (at 1.4875 0) (size 1.425 1.75) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 195 "Net-(D20-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 36f1aba1-5b39-483c-a038-67cae68cdfa1)) + (net 194 "Net-(D20-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 36f1aba1-5b39-483c-a038-67cae68cdfa1)) (model "${KICAD6_3DMODEL_DIR}/LED_SMD.3dshapes/LED_1206_3216Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -21550,7 +21816,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp cb818180-a885-47ea-8857-eb6ea1ccfc6a) - (at 22.14 -12.73) + (at -110.87 87.376) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM188R71H104KA93D") @@ -21594,7 +21860,7 @@ (footprint "TestPoint:TestPoint_Pad_4.0x4.0mm" (layer "F.Cu") (tedit 5A0F774F) (tstamp cc54e1ea-1baf-4d2f-a237-db9db65b8711) - (at 363.684 -57.754) + (at 158.325 198.151) (descr "SMD rectangular pad as test Point, square 4.0mm side length") (tags "test point SMD pad rectangle square") (property "Need_order" "0") @@ -21623,12 +21889,12 @@ (fp_line (start -2.5 -2.5) (end -2.5 2.5) (layer "F.CrtYd") (width 0.05) (tstamp 8a8f8af4-49ed-49d6-a3d1-3d4166017ff0)) (fp_line (start -2.5 -2.5) (end 2.5 -2.5) (layer "F.CrtYd") (width 0.05) (tstamp 9edb8949-3d0f-49a0-b5a8-80a4797b1982)) (pad "1" smd rect (at 0 0) (size 4 4) (layers "F.Cu" "F.Mask") - (net 155 "/PA 70MHz/VG_5V") (pinfunction "Pin_1") (pintype "passive") (tstamp dbeaba93-ec94-4e70-8ff6-eaf7a9601008)) + (net 154 "/PA 70MHz/VG_5V") (pinfunction "Pin_1") (pintype "passive") (tstamp dbeaba93-ec94-4e70-8ff6-eaf7a9601008)) ) (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp cc77acc0-23dc-4531-8a78-6b2b56ec9f64) - (at 232.922 -47.762) + (at 179.832 -29.591 -90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -21636,15 +21902,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/8652164d-8e2b-43c3-ba82-59cc07aaeab3") (attr smd) - (fp_text reference "R115" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R115" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 481ccc31-bb7c-483b-b7ea-9c7eaba14aa2) ) - (fp_text value "1.2k" (at 0 1.43) (layer "F.Fab") + (fp_text value "1.2k" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 77454715-dc9d-44d1-95f8-8fd0e83f1af0) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp e4b2c10b-1d26-45eb-80ee-b58f19c20f3f) ) @@ -21658,10 +21924,10 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 517f785c-e41f-481d-8337-bbd490d256e4)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 6c4a6242-dd75-4c03-8272-b67824bc653e)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp ccb7b9e2-4556-4a60-868e-e7e538654bc4)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 118 "Net-(C109-Pad2)") (pintype "passive") (tstamp 4f77dd90-5d72-4f39-99fa-889b09393494)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 313 "Net-(Q23-Pad1)") (pintype "passive") (tstamp 988b3b15-af24-41bc-bf60-f96261e64290)) + (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 117 "Net-(C109-Pad2)") (pintype "passive") (tstamp 4f77dd90-5d72-4f39-99fa-889b09393494)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 312 "Net-(Q23-Pad1)") (pintype "passive") (tstamp 988b3b15-af24-41bc-bf60-f96261e64290)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -21671,7 +21937,7 @@ (footprint "mpb:BNC_Molex_73100-0105_Horizontal" (layer "F.Cu") (tedit 60AFC043) (tstamp cdbc0c21-d29c-4b82-bf60-d3984356bb03) - (at 23.67 -62.39) + (at 143.1815 91.44 -90) (descr "BNC RF Interface, PCB mount 4 pin, Right Angle, Bayonet, 50Ohm, 4GHz, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1478035%7FB1%7Fpdf%7FEnglish%7FENG_CD_1478035_B1.pdf%7F1-1478035-0") (tags "BNC RF interface bayonet 50ohm") (property "Need_order" "") @@ -21679,15 +21945,15 @@ (property "Sheetname" "") (path "/d1e4882e-5e6c-4dfa-8dd5-534c12432f27") (attr through_hole) - (fp_text reference "J21" (at 5.8 10.5 90) (layer "F.SilkS") + (fp_text reference "J21" (at 5.8 10.5) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 5bb5d795-2119-4478-aaad-5f76907e890e) ) - (fp_text value "VHF" (at 0 15.3) (layer "F.Fab") + (fp_text value "VHF" (at 0 15.3 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp fc7d2ec7-579f-444e-9a0d-84dff4120149) ) - (fp_text user "${REFERENCE}" (at 0 5.5) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 5.5 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp fe298fb8-d286-4625-9673-d4a95d797ced) ) @@ -21714,11 +21980,11 @@ (fp_line (start 0.7 10.9) (end -0.8 10.9) (layer "F.Fab") (width 0.1) (tstamp db5f7ecd-044e-4fc0-95eb-ca0ee90884a2)) (fp_line (start -4.8 0) (end 4.8 0) (layer "F.Fab") (width 0.1) (tstamp de179495-a80d-48b1-a81f-82bb52dd015f)) (fp_circle (center 0 -7.2) (end 1 -7.2) (layer "F.Fab") (width 0.1) (fill none) (tstamp 06801b47-855b-4753-bbde-d9e1599b2059)) - (pad "1" thru_hole circle (at 0 12.4) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask) + (pad "1" thru_hole circle (at 0 12.4 270) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask) (net 19 "Net-(C17-Pad1)") (pinfunction "In") (pintype "passive") (tstamp 81548632-d166-4df1-9858-c4eaa9bf88f1)) - (pad "2" thru_hole circle (at 3.8 4.6) (size 4 4) (drill 1.8) (layers *.Cu *.Mask) + (pad "2" thru_hole circle (at 3.8 4.6 270) (size 4 4) (drill 1.8) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Ext") (pintype "passive") (tstamp 10a85c81-de7c-4c18-a061-7052fc1c5dd4)) - (pad "2" thru_hole circle (at -3.8 4.6) (size 4 4) (drill 1.8) (layers *.Cu *.Mask) + (pad "2" thru_hole circle (at -3.8 4.6 270) (size 4 4) (drill 1.8) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Ext") (pintype "passive") (tstamp d9703acb-ac26-4c04-bd44-959180cbab24)) (model "${KICAD6_3DMODEL_DIR}/Connector_Coaxial.3dshapes/BNC_TEConnectivity_1478035_Horizontal.wrl" (offset (xyz 0 0 0)) @@ -21729,7 +21995,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp cdd3556c-cd52-4a66-b574-b0ba5f43bb8d) - (at 356.694 -40.304) + (at 151.335 215.601) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -21763,7 +22029,7 @@ (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp c1eefbcb-2926-433b-af7c-816e9ba5adb1)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 158 "Net-(C159-Pad2)") (pintype "passive") (tstamp fbb94c94-321c-4936-885c-4d73849752b0)) + (net 157 "Net-(C159-Pad2)") (pintype "passive") (tstamp fbb94c94-321c-4936-885c-4d73849752b0)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -21811,15 +22077,15 @@ (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_1") (pintype "passive") (tstamp 7ab16189-0445-4bae-8ea1-8a4342368a9f)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 366 "Net-(D1-Pad1)") (pinfunction "Pin_2") (pintype "passive") (tstamp 89419f89-c070-46d3-a0ea-017cce85d5e0)) + (net 365 "Net-(D1-Pad1)") (pinfunction "Pin_2") (pintype "passive") (tstamp 89419f89-c070-46d3-a0ea-017cce85d5e0)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_3") (pintype "passive") (tstamp d1140efc-1e72-4096-8a81-f7ec4b563838)) (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 367 "Net-(J16-Pad5)") (pinfunction "Pin_4") (pintype "passive") (tstamp 280902fc-49e4-4d57-9848-18fcb2ba3179)) + (net 366 "Net-(J16-Pad5)") (pinfunction "Pin_4") (pintype "passive") (tstamp 280902fc-49e4-4d57-9848-18fcb2ba3179)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_5") (pintype "passive") (tstamp 4173268f-0a77-4e75-885b-5735ea22660f)) (pad "6" thru_hole oval (at 0 12.7) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 368 "unconnected-(J37-Pad6)") (pinfunction "Pin_6") (pintype "passive") (tstamp db3e8303-62ee-45a2-ae34-d7578143e325)) + (net 367 "unconnected-(J37-Pad6)") (pinfunction "Pin_6") (pintype "passive") (tstamp db3e8303-62ee-45a2-ae34-d7578143e325)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x06_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -21868,7 +22134,7 @@ (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 58 "Net-(C49-Pad2)") (pinfunction "E") (pintype "passive") (tstamp cc1e256b-a21f-4eb2-93db-9e14ed9c8be4)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 302 "Net-(Q10-Pad1)") (pinfunction "C") (pintype "passive") (tstamp 36abcd9e-5ed2-4e4a-b5ec-d70a24ee5d21)) + (net 301 "Net-(Q10-Pad1)") (pinfunction "C") (pintype "passive") (tstamp 36abcd9e-5ed2-4e4a-b5ec-d70a24ee5d21)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -21909,9 +22175,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp caf2d119-5bcc-43d4-97a5-f803352f4fff)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp ed7da274-48a4-4c6d-9b22-81977ccf5148)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 296 "Net-(Q1-Pad1)") (pintype "passive") (tstamp d026388b-ab8f-4774-9872-cd15762b5485)) + (net 295 "Net-(Q1-Pad1)") (pintype "passive") (tstamp d026388b-ab8f-4774-9872-cd15762b5485)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 229 "Net-(J7-Pad1)") (pintype "passive") (tstamp fb0dc1f8-ec7a-4c64-a430-f554e2732b1f)) + (net 228 "Net-(J7-Pad1)") (pintype "passive") (tstamp fb0dc1f8-ec7a-4c64-a430-f554e2732b1f)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -21921,7 +22187,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp cf33f7dd-be8d-483e-98fd-3bb65487cb44) - (at 353.544 -30.094) + (at 148.185 225.811) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -21952,9 +22218,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 72129c4a-2c24-4139-9a1d-1fa8aa973f1d)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp f6cead28-ef76-4cda-a70e-8914637c59d4)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 337 "Net-(R159-Pad1)") (pintype "passive") (tstamp 7b55f2cb-7755-4888-b18f-eb23718986a4)) + (net 336 "Net-(R159-Pad1)") (pintype "passive") (tstamp 7b55f2cb-7755-4888-b18f-eb23718986a4)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 148 "VGG2") (pintype "passive") (tstamp de91fb14-7add-49ce-8650-79a062cdca8a)) + (net 147 "VGG2") (pintype "passive") (tstamp de91fb14-7add-49ce-8650-79a062cdca8a)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -22044,10 +22310,10 @@ (fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp cd580f82-a666-48ed-a4c5-9ad26f998a1a)) (fp_line (start -0.7 1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp eaefa94a-d30e-4afb-802d-5e8e52b9cce3)) (pad "1" smd rect (at -1.5 -0.95) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 179 "Net-(D9-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 13bfa8ad-2c59-417e-9ebe-e7e176a61fa6)) + (net 178 "Net-(D9-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 13bfa8ad-2c59-417e-9ebe-e7e176a61fa6)) (pad "2" smd rect (at -1.5 0.95) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp 55aae3f0-e310-48ed-ab75-b3198e060dcc)) (pad "3" smd rect (at 1.5 0) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 180 "Net-(D10-Pad3)") (pinfunction "K") (pintype "passive") (tstamp 722e8d5a-6ce6-4839-970f-8089b53ed559)) + (net 179 "Net-(D10-Pad3)") (pinfunction "K") (pintype "passive") (tstamp 722e8d5a-6ce6-4839-970f-8089b53ed559)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -22057,7 +22323,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") (tedit 5F68FEEE) (tstamp cfbff6c0-2f7d-483a-b467-559d8cf4486b) - (at 342.454 -26.014) + (at 137.095 229.891) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor") (property "MPN" "") @@ -22091,7 +22357,7 @@ (pad "1" smd roundrect (at -0.95 0) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 8ed25032-2e06-42cd-b0fa-aa76f8620571)) (pad "2" smd roundrect (at 0.95 0) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 148 "VGG2") (pintype "passive") (tstamp e0aebacc-40fb-4311-9a3c-056a24edc5b7)) + (net 147 "VGG2") (pintype "passive") (tstamp e0aebacc-40fb-4311-9a3c-056a24edc5b7)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -22101,7 +22367,7 @@ (footprint "TestPoint:TestPoint_Pad_D2.0mm" (layer "F.Cu") (tedit 5A0F774F) (tstamp d1703428-6320-4906-9f10-11274ce3680a) - (at 241.472 -52.952) + (at 236.728 -16.764) (descr "SMD pad as test Point, diameter 2.0mm") (tags "test point SMD pad") (property "Sheetfile" "frontend_70.kicad_sch") @@ -22123,7 +22389,7 @@ (fp_circle (center 0 0) (end 0 1.2) (layer "F.SilkS") (width 0.12) (fill none) (tstamp ede87a26-b610-4769-acbb-e0e9f9971e6b)) (fp_circle (center 0 0) (end 1.5 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp efd29489-acc7-447c-8bc3-ed2781a1bccd)) (pad "1" smd circle (at 0 0) (size 2 2) (layers "F.Cu" "F.Mask") - (net 123 "Net-(C114-Pad2)") (pinfunction "1") (pintype "passive") (tstamp d86728cf-fa86-4650-86c8-0f73e887cdd1)) + (net 122 "Net-(C114-Pad2)") (pinfunction "1") (pintype "passive") (tstamp d86728cf-fa86-4650-86c8-0f73e887cdd1)) ) (footprint "Diode_SMD:D_SOD-123F" (layer "F.Cu") @@ -22170,7 +22436,7 @@ (pad "1" smd rect (at -1.4 0 90) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "K") (pintype "passive") (tstamp 98275645-ad3c-4c2c-a860-bcab133bfd44)) (pad "2" smd rect (at 1.4 0 90) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") - (net 184 "Net-(D13-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 63a6795d-1df2-4c6d-8e58-4eae41fb8234)) + (net 183 "Net-(D13-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 63a6795d-1df2-4c6d-8e58-4eae41fb8234)) (model "${KICAD6_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-123F.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -22211,7 +22477,7 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp d9adf6ea-12f6-4945-97e4-3e40b0c7ac58)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp dafb9160-b3bf-4461-a3c1-ea836f74e580)) (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 303 "Net-(Q10-Pad2)") (pintype "passive") (tstamp c6c40e29-92de-4fb4-a741-bb07be8bd9ae)) + (net 302 "Net-(Q10-Pad2)") (pintype "passive") (tstamp c6c40e29-92de-4fb4-a741-bb07be8bd9ae)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 08685ed8-52c1-4b61-b8a9-b6cef595e729)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -22476,7 +22742,7 @@ (fp_line (start 0.65 -1.45) (end 0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp 9cd445d1-fedb-437d-ae2c-d5463ef3a9fc)) (fp_line (start -0.65 1.45) (end -0.65 -1.125) (layer "F.Fab") (width 0.1) (tstamp ec3a4d63-595d-41ad-be93-bbae3098b8b6)) (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 307 "Net-(Q14-Pad2)") (pinfunction "D") (pintype "passive") (tstamp c931ac70-c474-489f-bddd-2b63edc05112)) + (net 306 "Net-(Q14-Pad2)") (pinfunction "D") (pintype "passive") (tstamp c931ac70-c474-489f-bddd-2b63edc05112)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 71 "Net-(C60-Pad2)") (pinfunction "S") (pintype "passive") (tstamp f4e2be80-e322-4344-ba6d-26c27b4b5ee9)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) @@ -22521,9 +22787,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 9ffe816f-0a86-4c54-9551-0a690abd2111)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp aa2bc417-c302-4edb-b719-b5bcabe8d4f1)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 280 "/Control on separate board/USB_DP") (pintype "passive") (tstamp 6c7760fc-3e73-44a8-bc65-59a27f985226)) + (net 279 "/Control on separate board/USB_DP") (pintype "passive") (tstamp 6c7760fc-3e73-44a8-bc65-59a27f985226)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 352 "Net-(R180-Pad2)") (pintype "passive") (tstamp 6afe6941-a99f-4adb-9f98-3c22f70ffec3)) + (net 351 "Net-(R180-Pad2)") (pintype "passive") (tstamp 6afe6941-a99f-4adb-9f98-3c22f70ffec3)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -22533,7 +22799,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp d92cd163-71f7-4c7c-896a-f619cb507d82) - (at 357.084 -57.204) + (at 151.725 198.701) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -22561,7 +22827,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp d92ee29d-9d63-4775-a3c4-141953680fd5) - (at 214.462 -31.162) + (at 104.226 -20.748) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -22595,7 +22861,7 @@ (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp aa334cc8-c023-460c-b4e0-bc319b49d30c)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 132 "Net-(C126-Pad1)") (pintype "passive") (tstamp 16066100-760f-4a0e-8f4a-d6dd7a5dbd46)) + (net 131 "Net-(C126-Pad1)") (pintype "passive") (tstamp 16066100-760f-4a0e-8f4a-d6dd7a5dbd46)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -22684,10 +22950,10 @@ (fp_line (start -0.7 -0.95) (end -0.7 1.5) (layer "F.Fab") (width 0.1) (tstamp 962e61a3-6890-4739-a1cc-48d905a462d0)) (fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp ca19f80d-6c55-4ac0-9e78-e63a183becd2)) (pad "1" smd rect (at -1.5 -0.95 180) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 182 "Net-(D11-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 33139bee-799b-47e7-9a95-62f8ef27119b)) + (net 181 "Net-(D11-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 33139bee-799b-47e7-9a95-62f8ef27119b)) (pad "2" smd rect (at -1.5 0.95 180) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp e180ea0a-315c-4c8b-938f-1f22b8eee6d5)) (pad "3" smd rect (at 1.5 0 180) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 183 "Net-(D11-Pad3)") (pinfunction "K") (pintype "passive") (tstamp 9682350d-6ae6-4cf6-91d1-c9a2655f1b4a)) + (net 182 "Net-(D11-Pad3)") (pinfunction "K") (pintype "passive") (tstamp 9682350d-6ae6-4cf6-91d1-c9a2655f1b4a)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -22697,7 +22963,7 @@ (footprint "Package_TO_SOT_SMD:SOT-223-3_TabPin2" (layer "F.Cu") (tedit 5A02FF57) (tstamp daa44710-4dff-4358-8a9b-955800c8b067) - (at 160.752 -16.382) + (at 50.516 -5.968) (descr "module CMS SOT223 4 pins") (tags "CMS SOT") (property "MPN" "LM1117IMP-ADJ") @@ -22732,13 +22998,13 @@ (fp_line (start -1.85 -2.35) (end -0.85 -3.35) (layer "F.Fab") (width 0.1) (tstamp e7dce7be-8d10-4bbb-a474-f5f325d88ace)) (fp_line (start -0.85 -3.35) (end 1.85 -3.35) (layer "F.Fab") (width 0.1) (tstamp ef3403ff-52ec-4d19-a021-512feaf48e12)) (pad "1" smd rect (at -3.15 -2.3) (size 2 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 127 "Net-(C119-Pad1)") (pinfunction "ADJ") (pintype "input") (tstamp b45633eb-dfce-4aac-93d5-79f7ec35941d)) + (net 126 "Net-(C119-Pad1)") (pinfunction "ADJ") (pintype "input") (tstamp b45633eb-dfce-4aac-93d5-79f7ec35941d)) (pad "2" smd rect (at 3.15 0) (size 2 3.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 315 "/70MHz VHF Frontend/+9V_FE") (pinfunction "VO") (pintype "power_out") (tstamp 54c201f6-bf0b-4fd6-9ba4-ec5bbcd665b0)) + (net 314 "/70MHz VHF Frontend/+9V_FE") (pinfunction "VO") (pintype "power_out") (tstamp 54c201f6-bf0b-4fd6-9ba4-ec5bbcd665b0)) (pad "2" smd rect (at -3.15 0) (size 2 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 315 "/70MHz VHF Frontend/+9V_FE") (pinfunction "VO") (pintype "power_out") (tstamp d6dc2e30-dcfc-42fe-a5d4-b7ec27ee28d4)) + (net 314 "/70MHz VHF Frontend/+9V_FE") (pinfunction "VO") (pintype "power_out") (tstamp d6dc2e30-dcfc-42fe-a5d4-b7ec27ee28d4)) (pad "3" smd rect (at -3.15 2.3) (size 2 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 125 "/70MHz VHF Frontend/12V") (pinfunction "VI") (pintype "power_in") (tstamp 15eeb50f-3b43-4905-95aa-ac83cb90cd40)) + (net 124 "/70MHz VHF Frontend/12V") (pinfunction "VI") (pintype "power_in") (tstamp 15eeb50f-3b43-4905-95aa-ac83cb90cd40)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-223.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -22780,7 +23046,7 @@ (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 9289ffb3-a0c0-4c9f-8468-599223b6ff09)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp ff00a4be-ba2c-4e50-aae7-379455158d31)) (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 5da08279-025f-4f7c-ac51-dcd0828c02ec)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 5da08279-025f-4f7c-ac51-dcd0828c02ec)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 6322cec1-76f8-408c-bfa4-d4c3596413bd)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" @@ -22792,7 +23058,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp db70cb7d-ea1b-4780-8956-ffa1d166b0f7) - (at 236.855 49.53) + (at 116.796 141.046) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -22852,9 +23118,9 @@ (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp ed400c5d-6005-4531-983c-321bd77b60e0)) (fp_line (start 1.25 -1) (end 1.25 1) (layer "F.Fab") (width 0.1) (tstamp f39b5316-6206-424a-8a83-85f7151c1292)) (pad "1" smd roundrect (at -1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 289 "Net-(L15-Pad1)") (pinfunction "1") (pintype "passive") (tstamp dfb534ed-86f9-4bda-8d11-d984649471f6)) + (net 288 "Net-(L15-Pad1)") (pinfunction "1") (pintype "passive") (tstamp dfb534ed-86f9-4bda-8d11-d984649471f6)) (pad "2" smd roundrect (at 1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 288 "Net-(L14-Pad1)") (pinfunction "2") (pintype "passive") (tstamp d6f44257-ea0a-4350-888a-95e98379ad3d)) + (net 287 "Net-(L14-Pad1)") (pinfunction "2") (pintype "passive") (tstamp d6f44257-ea0a-4350-888a-95e98379ad3d)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -22908,7 +23174,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp df285c2f-4e68-4a24-a1eb-b600ba912a19) - (at 232.812 -61.002) + (at 240.538 -16.764) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A103KXJTBC") @@ -22942,7 +23208,7 @@ (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp bdbb405f-9a9a-43e4-9941-3419c9616aa0)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 120 "Net-(C111-Pad2)") (pintype "passive") (tstamp edd94e92-a01b-4707-b5b1-293f582abe3e)) + (net 119 "Net-(C111-Pad2)") (pintype "passive") (tstamp edd94e92-a01b-4707-b5b1-293f582abe3e)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -22975,12 +23241,12 @@ (fp_circle (center 0 0) (end 0 0.95) (layer "F.SilkS") (width 0.12) (fill none) (tstamp 36179c44-2be7-4dc8-bbc0-18a084f800c7)) (fp_circle (center 0 0) (end 1.25 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp 52adeb2a-563f-4df0-8fc5-953edbb4bf46)) (pad "1" smd circle (at 0 0) (size 1.5 1.5) (layers "F.Cu" "F.Mask") - (net 164 "/Control on separate board/3.3V_UI") (pinfunction "1") (pintype "passive") (tstamp 71fda131-a62e-4934-bc08-bcc0b70d089e)) + (net 163 "/Control on separate board/3.3V_UI") (pinfunction "1") (pintype "passive") (tstamp 71fda131-a62e-4934-bc08-bcc0b70d089e)) ) (footprint "Package_TO_SOT_SMD:SOT-143" (layer "F.Cu") (tedit 61E30312) (tstamp e06b43d3-03b1-4000-aaaf-fc8a7fe6cb22) - (at 200.322 -23.512) + (at 242.57 -8.636 180) (descr "SOT-143 https://www.nxp.com/docs/en/package-information/SOT143B.pdf") (tags "SOT-143") (property "MPN" "BF998E6327HTSA1") @@ -23012,14 +23278,14 @@ (fp_line (start 0.65 1.45) (end -0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp 6b5c1e82-6cb7-4293-9304-972d51f6fb7c)) (fp_line (start 0.65 -1.45) (end 0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp a9bb5970-d33e-45c1-b32c-12244f466761)) (fp_line (start -0.65 1.45) (end -0.65 -0.95) (layer "F.Fab") (width 0.1) (tstamp f9d6f8ec-df39-4d40-bfe6-c5b346f72444)) - (pad "1" smd rect (at -1 -0.75) (size 0.7 1) (layers "F.Cu" "F.Paste" "F.Mask") - (net 128 "Net-(C120-Pad1)") (pinfunction "D") (pintype "passive") (tstamp 0580cbd1-16e6-462a-8d91-36e566907202)) - (pad "2" smd rect (at -1 0.95) (size 0.7 0.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 126 "Net-(C118-Pad2)") (pinfunction "S") (pintype "passive") (tstamp 47ac22e6-14ec-4daa-bd63-dc99d9a226a8)) - (pad "3" smd rect (at 1 0.95) (size 0.7 0.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 123 "Net-(C114-Pad2)") (pinfunction "G1") (pintype "passive") (tstamp 061a068e-ab20-400c-af81-61d9d1f8cccb)) - (pad "4" smd rect (at 1 -0.95) (size 0.7 0.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 314 "Net-(Q24-Pad4)") (pinfunction "G2") (pintype "passive") (tstamp 0c027ee8-b12e-4b56-b67c-b3268b854e3e)) + (pad "1" smd rect (at -1 -0.75 180) (size 0.7 1) (layers "F.Cu" "F.Paste" "F.Mask") + (net 127 "Net-(C120-Pad1)") (pinfunction "D") (pintype "passive") (tstamp 0580cbd1-16e6-462a-8d91-36e566907202)) + (pad "2" smd rect (at -1 0.95 180) (size 0.7 0.6) (layers "F.Cu" "F.Paste" "F.Mask") + (net 125 "Net-(C118-Pad2)") (pinfunction "S") (pintype "passive") (tstamp 47ac22e6-14ec-4daa-bd63-dc99d9a226a8)) + (pad "3" smd rect (at 1 0.95 180) (size 0.7 0.6) (layers "F.Cu" "F.Paste" "F.Mask") + (net 122 "Net-(C114-Pad2)") (pinfunction "G1") (pintype "passive") (tstamp 061a068e-ab20-400c-af81-61d9d1f8cccb)) + (pad "4" smd rect (at 1 -0.95 180) (size 0.7 0.6) (layers "F.Cu" "F.Paste" "F.Mask") + (net 313 "Net-(Q24-Pad4)") (pinfunction "G2") (pintype "passive") (tstamp 0c027ee8-b12e-4b56-b67c-b3268b854e3e)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-143.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -23076,31 +23342,31 @@ (fp_line (start -2.45 -6.4) (end -3.45 -5.4) (layer "F.Fab") (width 0.1) (tstamp 734655ad-ce66-43bd-bf31-554afc358975)) (fp_line (start -3.45 6.4) (end 3.45 6.4) (layer "F.Fab") (width 0.1) (tstamp 94d15c07-384c-46a7-ac0f-c1088275593b)) (pad "1" smd rect (at -4.4 -4.445 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 194 "Net-(D19-Pad3)") (pinfunction "TD+") (pintype "passive") (tstamp 83911ba0-ea29-423b-a933-02392b2f9e6f)) + (net 193 "Net-(D19-Pad3)") (pinfunction "TD+") (pintype "passive") (tstamp 83911ba0-ea29-423b-a933-02392b2f9e6f)) (pad "2" smd rect (at -4.4 -3.175 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "C_TD") (pintype "passive") (tstamp cd20f501-6474-4c82-a662-35b104fa1232)) (pad "3" smd rect (at -4.4 -1.905 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 193 "Net-(D18-Pad3)") (pinfunction "TD-") (pintype "passive") (tstamp 0b699531-3a2a-44de-9b61-667b49b63294)) + (net 192 "Net-(D18-Pad3)") (pinfunction "TD-") (pintype "passive") (tstamp 0b699531-3a2a-44de-9b61-667b49b63294)) (pad "4" smd rect (at -4.4 -0.635 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp 4a256df0-8b88-4155-bdf2-b93d6dd6d4b5)) (pad "5" smd rect (at -4.4 0.635 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp c632cd8e-0129-4a8e-912f-2083f6d9df94)) (pad "6" smd rect (at -4.4 1.905 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 191 "Net-(D18-Pad1)") (pinfunction "RD+") (pintype "passive") (tstamp c27eff46-8fe9-4f57-aff9-b9adff1d05f0)) + (net 190 "Net-(D18-Pad1)") (pinfunction "RD+") (pintype "passive") (tstamp c27eff46-8fe9-4f57-aff9-b9adff1d05f0)) (pad "7" smd rect (at -4.4 3.175 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 327 "Net-(R93-Pad1)") (pinfunction "C_RD") (pintype "passive") (tstamp b4b3a9d3-b546-446d-8e29-8fb887208222)) + (net 326 "Net-(R93-Pad1)") (pinfunction "C_RD") (pintype "passive") (tstamp b4b3a9d3-b546-446d-8e29-8fb887208222)) (pad "8" smd rect (at -4.4 4.445 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 192 "Net-(D18-Pad2)") (pinfunction "RD-") (pintype "passive") (tstamp 9a9743ff-4bc0-48d3-8f4c-cae442c5a846)) + (net 191 "Net-(D18-Pad2)") (pinfunction "RD-") (pintype "passive") (tstamp 9a9743ff-4bc0-48d3-8f4c-cae442c5a846)) (pad "9" smd rect (at 4.4 4.445 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 98 "Net-(C82-Pad2)") (pinfunction "RX-") (pintype "passive") (tstamp c4892d3d-ab20-48f9-baa5-4199dcbc038a)) (pad "10" smd rect (at 4.4 3.175 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 359 "unconnected-(TR2-Pad10)") (pinfunction "C_RX") (pintype "passive+no_connect") (tstamp 871b5a9d-63ba-41ea-8d78-214f282791a1)) + (net 358 "unconnected-(TR2-Pad10)") (pinfunction "C_RX") (pintype "passive+no_connect") (tstamp 871b5a9d-63ba-41ea-8d78-214f282791a1)) (pad "11" smd rect (at 4.4 1.905 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "RX+") (pintype "passive") (tstamp e92e949e-b94e-403b-b8fc-95d485f6e4d0)) (pad "12" smd rect (at 4.4 0.635 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp 621bb1e1-4c85-4f6a-9fae-26fd24a3b053)) (pad "13" smd rect (at 4.4 -0.635 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp b39ba172-06c0-4ad5-9697-1c5799cf1752)) (pad "14" smd rect (at 4.4 -1.905 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 331 "Net-(R101-Pad1)") (pinfunction "TX-") (pintype "passive") (tstamp 74f2f348-1d28-453d-b285-247be31ae5c5)) + (net 330 "Net-(R101-Pad1)") (pinfunction "TX-") (pintype "passive") (tstamp 74f2f348-1d28-453d-b285-247be31ae5c5)) (pad "15" smd rect (at 4.4 -3.175 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 360 "unconnected-(TR2-Pad15)") (pinfunction "C_TX") (pintype "passive+no_connect") (tstamp 4f9aa9ca-5475-4529-a2aa-e7d604218329)) + (net 359 "unconnected-(TR2-Pad15)") (pinfunction "C_TX") (pintype "passive+no_connect") (tstamp 4f9aa9ca-5475-4529-a2aa-e7d604218329)) (pad "16" smd rect (at 4.4 -4.445 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "TX+") (pintype "passive") (tstamp 484c8e52-4135-4410-8a3f-05cd11b2716b)) (model "${KICAD6_3DMODEL_DIR}/Transformer_SMD.3dshapes/Transformer_Ethernet_Bourns_PT61017PEL.wrl" @@ -23112,7 +23378,7 @@ (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp e2279c93-00cc-4c04-b84e-e72907cb3f70) - (at 214.402 -38.912) + (at 141.732 -26.416 90) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -23120,15 +23386,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/153ee182-ddd8-4ea0-bb0a-42d70565fb88") (attr smd) - (fp_text reference "R108" (at 0 -1.65) (layer "F.SilkS") + (fp_text reference "R108" (at 0 -1.65 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 571c42a9-ad23-406b-badf-59f91f0805e2) ) - (fp_text value "DNF" (at 0 1.65) (layer "F.Fab") + (fp_text value "DNF" (at 0 1.65 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp bfd26119-78d2-4872-a936-643754edcf89) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.08))) (tstamp 0bb68fce-304e-4b21-a52d-f5a550e5f33c) ) @@ -23142,10 +23408,10 @@ (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 171ea10e-d658-40b3-94c1-6b6ac9558ee1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 659efeed-8433-4947-a5eb-1f507592b8d2)) (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp fdb9940a-430a-4069-8be2-44b154933fe2)) - (pad "1" smd roundrect (at -1 0) (size 1.2 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.208333) - (net 292 "Net-(L23-Pad2)") (pintype "passive") (tstamp ffab818a-0b74-4a4f-ab84-7e2dd711e92f)) - (pad "2" smd roundrect (at 1 0) (size 1.2 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.208333) - (net 104 "Net-(C100-Pad1)") (pintype "passive") (tstamp 1d1d981a-6b2d-428c-b635-1eefdc451c3d)) + (pad "1" smd roundrect (at -1 0 90) (size 1.2 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.208333) + (net 291 "Net-(L23-Pad2)") (pintype "passive") (tstamp ffab818a-0b74-4a4f-ab84-7e2dd711e92f)) + (pad "2" smd roundrect (at 1 0 90) (size 1.2 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.208333) + (net 2 "GND") (pintype "passive") (tstamp 1d1d981a-6b2d-428c-b635-1eefdc451c3d)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -23155,7 +23421,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp e37873ba-5aeb-4ddd-aec0-d950bf9cfdf0) - (at 358.714 -35.284) + (at 153.355 220.621) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -23186,9 +23452,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 36d85b22-75ab-4a9a-a4a8-9e69fc320812)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 618061e9-6468-4b94-936a-d0e908a488b7)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 148 "VGG2") (pintype "passive") (tstamp 53c303f9-504a-4015-a339-c204af13d5e8)) + (net 147 "VGG2") (pintype "passive") (tstamp 53c303f9-504a-4015-a339-c204af13d5e8)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 364 "Net-(D22-Pad2)") (pintype "passive") (tstamp b9c36b3b-34e8-4007-b260-8da382aa6010)) + (net 363 "Net-(D22-Pad2)") (pintype "passive") (tstamp b9c36b3b-34e8-4007-b260-8da382aa6010)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -23233,11 +23499,11 @@ (fp_line (start -0.325 -1.45) (end 0.65 -1.45) (layer "F.Fab") (width 0.1) (tstamp aab34a95-9129-43b0-acbb-9c63820c5d8e)) (fp_line (start -0.65 -1.125) (end -0.325 -1.45) (layer "F.Fab") (width 0.1) (tstamp e6757aac-7b52-4aab-b35f-b4a8889fc1e9)) (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 306 "Net-(Q13-Pad1)") (pinfunction "B") (pintype "input") (tstamp a00d7f75-7958-4223-9cd5-c596f47e04c3)) + (net 305 "Net-(Q13-Pad1)") (pinfunction "B") (pintype "input") (tstamp a00d7f75-7958-4223-9cd5-c596f47e04c3)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 63 "Net-(C53-Pad2)") (pinfunction "E") (pintype "passive") (tstamp 76dd58f3-c953-42e8-ae03-d922926daac0)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 178 "Net-(D8-Pad2)") (pinfunction "C") (pintype "passive") (tstamp eb4a78b9-cec1-4f2c-b17f-02c2806eac38)) + (net 177 "Net-(D8-Pad2)") (pinfunction "C") (pintype "passive") (tstamp eb4a78b9-cec1-4f2c-b17f-02c2806eac38)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -23280,7 +23546,7 @@ (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp b53fd2e3-48a4-4305-8b37-4f35287f6a66)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 325 "Net-(R35-Pad1)") (pintype "passive") (tstamp e6336beb-44d8-4c5e-9d77-018f78461eeb)) + (net 324 "Net-(R35-Pad1)") (pintype "passive") (tstamp e6336beb-44d8-4c5e-9d77-018f78461eeb)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -23288,9 +23554,53 @@ ) ) + (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEF0) (tstamp e4e37778-8ddb-4fa6-a8e2-dc0966fedf20) + (at 218.948 -2.794 180) + (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") + (tags "inductor handsolder") + (property "MPN" "LQW2UASR56") + (property "Need_order" "1") + (property "Sheetfile" "frontend_70.kicad_sch") + (property "Sheetname" "70MHz VHF Frontend") + (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/c7730127-7543-48ff-ac3b-9467257a35a9") + (attr smd) + (fp_text reference "L46" (at 0 -2.05) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp e0569402-aa90-408a-b315-9cfc26f20a98) + ) + (fp_text value "56nH" (at 0 2.05) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 7e58bde4-2cc8-4a9f-a1b0-685da7c24630) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.62 0.62) (thickness 0.09))) + (tstamp 9d8666cb-244e-4d19-b3e5-0834c248fd9a) + ) + (fp_line (start -0.261252 -1.11) (end 0.261252 -1.11) (layer "F.SilkS") (width 0.12) (tstamp b6def4a3-d694-4716-a8e2-02bfc7a8be98)) + (fp_line (start -0.261252 1.11) (end 0.261252 1.11) (layer "F.SilkS") (width 0.12) (tstamp e2615b00-0681-4332-b1a6-dde1a980d662)) + (fp_line (start -2.12 1.35) (end -2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 0a15de8d-c9d5-483a-a3a7-48db793db35d)) + (fp_line (start 2.12 -1.35) (end 2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp 33f888d2-4ba6-4d50-a8eb-11e8d6acc37f)) + (fp_line (start 2.12 1.35) (end -2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp 899a5909-551e-4fa9-92d5-b5ef3657d12c)) + (fp_line (start -2.12 -1.35) (end 2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 8cb63930-9e5b-42fe-a64d-85222238adcc)) + (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 3091ee30-728c-4ef9-a705-6d7014fab3b9)) + (fp_line (start 1.25 -1) (end 1.25 1) (layer "F.Fab") (width 0.1) (tstamp 90b870a5-fa5a-42b7-945a-323c3895b936)) + (fp_line (start 1.25 1) (end -1.25 1) (layer "F.Fab") (width 0.1) (tstamp 9b4a0133-814b-4138-9907-4e6c90911ea5)) + (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp a2f705ca-ddf7-4451-967c-fce99f831941)) + (pad "1" smd roundrect (at -1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 373 "Net-(L29-Pad2)") (pinfunction "1") (pintype "passive") (tstamp ed18812d-192c-4e45-a92a-243ea142516f)) + (pad "2" smd roundrect (at 1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 962a9041-e529-42fa-a4fa-76abc186808b)) + (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp e550bcea-329b-4e78-b68d-92ec26b59157) - (at 354.364 -37.624) + (at 149.005 218.281) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -23321,9 +23631,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp af54a49d-e6ad-40eb-89cf-c53b50be0b07)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c051aa5e-0259-4fd1-a581-7d554a942007)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 141 "VGG1") (pintype "passive") (tstamp 5286122e-d640-491c-a828-bca7c96dcf32)) + (net 140 "VGG1") (pintype "passive") (tstamp 5286122e-d640-491c-a828-bca7c96dcf32)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 145 "Net-(C143-Pad2)") (pintype "passive") (tstamp 6bbe33cc-b74b-4e6a-a871-ebab8333f2ee)) + (net 144 "Net-(C143-Pad2)") (pintype "passive") (tstamp 6bbe33cc-b74b-4e6a-a871-ebab8333f2ee)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -23364,9 +23674,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c55da2a4-e07c-47e0-b5bc-0ccbc014a85d)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp ddb406b2-14b6-46a6-971f-4a441b1b1933)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 166 "Net-(C171-Pad1)") (pintype "passive") (tstamp b3f84ecb-2a6e-41ea-bdb8-3f781894508b)) + (net 165 "Net-(C171-Pad1)") (pintype "passive") (tstamp b3f84ecb-2a6e-41ea-bdb8-3f781894508b)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 165 "Net-(C169-Pad1)") (pintype "passive") (tstamp 707dc153-498b-4c98-a0c6-964ab054781a)) + (net 164 "Net-(C169-Pad1)") (pintype "passive") (tstamp 707dc153-498b-4c98-a0c6-964ab054781a)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -23407,7 +23717,7 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 40724455-d86f-4fab-afe5-7fc1c17a77ab)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 5b97f7d9-db18-45ef-9a3c-d3b8930f2f53)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 256 "/Baseband/VHF_OUT") (pintype "passive") (tstamp 67723ad9-9e5a-4624-ac4a-06c2be76ec52)) + (net 255 "/Baseband/VHF_OUT") (pintype "passive") (tstamp 67723ad9-9e5a-4624-ac4a-06c2be76ec52)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 0b8fce3c-376c-43cc-ba1e-eed647eeab53)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -23419,7 +23729,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp e73bb231-72cd-4302-850c-cf4be3d2f1b7) - (at 190.512 -12.552) + (at 80.276 -2.138) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -23453,7 +23763,7 @@ (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 5bb4df8c-e1dd-4e3b-8994-3866e43a4f2b)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 124 "Net-(C115-Pad2)") (pintype "passive") (tstamp 73bc4474-5467-45f6-8fea-f1faa68a56aa)) + (net 123 "Net-(C115-Pad2)") (pintype "passive") (tstamp 73bc4474-5467-45f6-8fea-f1faa68a56aa)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -23540,7 +23850,7 @@ (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp d49bf89c-0cdc-4ba8-99d2-8c8ad0f1f8d5)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp ddb08016-6aa3-464a-a630-0183fa032e31)) (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 83d4e461-6d35-4b23-a8d3-ee1432bf320e)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 83d4e461-6d35-4b23-a8d3-ee1432bf320e)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 0d3b191d-22c2-4462-ac5c-954ebbeb09a3)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" @@ -23612,101 +23922,101 @@ (fp_line (start -2.5 -3.5) (end 3.5 -3.5) (layer "F.Fab") (width 0.1) (tstamp 6469a4c7-f4d3-4647-b7af-9fecd37bfa05)) (fp_line (start -3.5 3.5) (end -3.5 -2.5) (layer "F.Fab") (width 0.1) (tstamp eb516649-34bb-48d6-9705-3589008315cc)) (pad "1" smd roundrect (at -4.1625 -2.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 273 "Net-(J32-Pad1)") (pinfunction "VBAT") (pintype "power_in") (tstamp 38250e46-5f8a-4271-9ac2-c7f4064167b2)) + (net 272 "Net-(J32-Pad1)") (pinfunction "VBAT") (pintype "power_in") (tstamp 38250e46-5f8a-4271-9ac2-c7f4064167b2)) (pad "2" smd roundrect (at -4.1625 -2.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 272 "/Control on separate board/PC13") (pinfunction "PC13") (pintype "bidirectional") (tstamp 679f5812-9221-41a6-8ab5-f8aa94e7cd1a)) + (net 271 "/Control on separate board/PC13") (pinfunction "PC13") (pintype "bidirectional") (tstamp 679f5812-9221-41a6-8ab5-f8aa94e7cd1a)) (pad "3" smd roundrect (at -4.1625 -1.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 271 "/Control on separate board/PC14") (pinfunction "PC14") (pintype "bidirectional") (tstamp 21520dbf-3bb0-4815-a71d-60281dc3f9e0)) + (net 270 "/Control on separate board/PC14") (pinfunction "PC14") (pintype "bidirectional") (tstamp 21520dbf-3bb0-4815-a71d-60281dc3f9e0)) (pad "4" smd roundrect (at -4.1625 -1.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 345 "/Control on separate board/ENC_BTN") (pinfunction "PC15") (pintype "bidirectional") (tstamp bc8c0b99-a6fc-4232-90ed-8d9dcbd22c3e)) + (net 344 "/Control on separate board/ENC_BTN") (pinfunction "PC15") (pintype "bidirectional") (tstamp bc8c0b99-a6fc-4232-90ed-8d9dcbd22c3e)) (pad "5" smd roundrect (at -4.1625 -0.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 346 "/Control on separate board/XTAL1") (pinfunction "PD0") (pintype "input") (tstamp 68b2a0d0-dd63-4c9d-8e48-110600170f85)) + (net 345 "/Control on separate board/XTAL1") (pinfunction "PD0") (pintype "input") (tstamp 68b2a0d0-dd63-4c9d-8e48-110600170f85)) (pad "6" smd roundrect (at -4.1625 -0.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 347 "/Control on separate board/XTAL2") (pinfunction "PD1") (pintype "input") (tstamp 5d355c2b-b367-47f1-a6bb-fde264f6948d)) + (net 346 "/Control on separate board/XTAL2") (pinfunction "PD1") (pintype "input") (tstamp 5d355c2b-b367-47f1-a6bb-fde264f6948d)) (pad "7" smd roundrect (at -4.1625 0.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 284 "/Control on separate board/RESETn") (pinfunction "NRST") (pintype "input") (tstamp 58408b79-ca73-4259-96e0-2756e21c9960)) + (net 283 "/Control on separate board/RESETn") (pinfunction "NRST") (pintype "input") (tstamp 58408b79-ca73-4259-96e0-2756e21c9960)) (pad "8" smd roundrect (at -4.1625 0.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "VSSA") (pintype "power_in") (tstamp d20538fc-89b2-44ea-8945-2f5682270055)) (pad "9" smd roundrect (at -4.1625 1.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 168 "Net-(C173-Pad2)") (pinfunction "VDDA") (pintype "power_in") (tstamp 224fb751-39d5-47e6-af8e-cb3b8c1da6bb)) + (net 167 "Net-(C173-Pad2)") (pinfunction "VDDA") (pintype "power_in") (tstamp 224fb751-39d5-47e6-af8e-cb3b8c1da6bb)) (pad "10" smd roundrect (at -4.1625 1.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 274 "/Control on separate board/PA0") (pinfunction "PA0") (pintype "bidirectional") (tstamp 52aa30bd-ea56-44bd-a594-35da592f793f)) + (net 273 "/Control on separate board/PA0") (pinfunction "PA0") (pintype "bidirectional") (tstamp 52aa30bd-ea56-44bd-a594-35da592f793f)) (pad "11" smd roundrect (at -4.1625 2.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 241 "/Control on separate board/MUTE_MICn") (pinfunction "PA1") (pintype "bidirectional") (tstamp 96dccaf7-cad4-40c0-8766-f7714dff30fd)) + (net 240 "/Control on separate board/MUTE_MICn") (pinfunction "PA1") (pintype "bidirectional") (tstamp 96dccaf7-cad4-40c0-8766-f7714dff30fd)) (pad "12" smd roundrect (at -4.1625 2.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 349 "/Control on separate board/MUTE_SPKR") (pinfunction "PA2") (pintype "bidirectional") (tstamp 46650874-91b1-47a6-bb5e-b5484816c828)) + (net 348 "/Control on separate board/MUTE_SPKR") (pinfunction "PA2") (pintype "bidirectional") (tstamp 46650874-91b1-47a6-bb5e-b5484816c828)) (pad "13" smd roundrect (at -2.75 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 235 "/Control on separate board/MIC_PTTn") (pinfunction "PA3") (pintype "bidirectional") (tstamp 0484d771-e071-412b-8e9f-999e8fe5d68c)) + (net 234 "/Control on separate board/MIC_PTTn") (pinfunction "PA3") (pintype "bidirectional") (tstamp 0484d771-e071-412b-8e9f-999e8fe5d68c)) (pad "14" smd roundrect (at -2.25 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 362 "unconnected-(U11-Pad14)") (pinfunction "PA4") (pintype "bidirectional") (tstamp 24cc27f0-b32c-4f34-b11a-c6f553720238)) + (net 361 "unconnected-(U11-Pad14)") (pinfunction "PA4") (pintype "bidirectional") (tstamp 24cc27f0-b32c-4f34-b11a-c6f553720238)) (pad "15" smd roundrect (at -1.75 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 238 "/Control on separate board/S_METER") (pinfunction "PA5") (pintype "bidirectional") (tstamp f38d8a06-9bff-442a-96e2-1f6e4355a548)) + (net 237 "/Control on separate board/S_METER") (pinfunction "PA5") (pintype "bidirectional") (tstamp f38d8a06-9bff-442a-96e2-1f6e4355a548)) (pad "16" smd roundrect (at -1.25 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 163 "/Control on separate board/ENC_A") (pinfunction "PA6") (pintype "bidirectional") (tstamp 5ab94a45-40a9-4216-9817-3b7832e57666)) + (net 162 "/Control on separate board/ENC_A") (pinfunction "PA6") (pintype "bidirectional") (tstamp 5ab94a45-40a9-4216-9817-3b7832e57666)) (pad "17" smd roundrect (at -0.75 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 162 "/Control on separate board/ENC_B") (pinfunction "PA7") (pintype "bidirectional") (tstamp b1a6ea1a-e318-4dd1-8b4b-3c4945bd439b)) + (net 161 "/Control on separate board/ENC_B") (pinfunction "PA7") (pintype "bidirectional") (tstamp b1a6ea1a-e318-4dd1-8b4b-3c4945bd439b)) (pad "18" smd roundrect (at -0.25 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 341 "/Control on separate board/BTN1") (pinfunction "PB0") (pintype "bidirectional") (tstamp aa9a5fe4-2fab-4a06-b41a-6ed1557882e8)) + (net 340 "/Control on separate board/BTN1") (pinfunction "PB0") (pintype "bidirectional") (tstamp aa9a5fe4-2fab-4a06-b41a-6ed1557882e8)) (pad "19" smd roundrect (at 0.25 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 340 "/Control on separate board/BTN0") (pinfunction "PB1") (pintype "bidirectional") (tstamp 0f38dd68-bbbd-4800-bd9f-9c157786edf2)) + (net 339 "/Control on separate board/BTN0") (pinfunction "PB1") (pintype "bidirectional") (tstamp 0f38dd68-bbbd-4800-bd9f-9c157786edf2)) (pad "20" smd roundrect (at 0.75 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 354 "/Control on separate board/BOOT1") (pinfunction "PB2") (pintype "bidirectional") (tstamp fa4c0fae-5ae7-4f0c-ab9a-4af363b8b6e5)) + (net 353 "/Control on separate board/BOOT1") (pinfunction "PB2") (pintype "bidirectional") (tstamp fa4c0fae-5ae7-4f0c-ab9a-4af363b8b6e5)) (pad "21" smd roundrect (at 1.25 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 270 "/Control on separate board/I2C2_SCL") (pinfunction "PB10") (pintype "bidirectional") (tstamp 3d3f78f5-aa2a-4354-869a-a741806a9265)) + (net 269 "/Control on separate board/I2C2_SCL") (pinfunction "PB10") (pintype "bidirectional") (tstamp 3d3f78f5-aa2a-4354-869a-a741806a9265)) (pad "22" smd roundrect (at 1.75 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 269 "/Control on separate board/I2C2_SDA") (pinfunction "PB11") (pintype "bidirectional") (tstamp beb05411-3427-4ec8-8e41-1695f3bff515)) + (net 268 "/Control on separate board/I2C2_SDA") (pinfunction "PB11") (pintype "bidirectional") (tstamp beb05411-3427-4ec8-8e41-1695f3bff515)) (pad "23" smd roundrect (at 2.25 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "VSS") (pintype "power_in") (tstamp 872ff4b9-e7f0-4034-bc2d-56cbea1ae59c)) (pad "24" smd roundrect (at 2.75 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pinfunction "VDD") (pintype "power_in") (tstamp 8b53555e-3372-4009-9e9d-0c793cc092b8)) + (net 163 "/Control on separate board/3.3V_UI") (pinfunction "VDD") (pintype "power_in") (tstamp 8b53555e-3372-4009-9e9d-0c793cc092b8)) (pad "25" smd roundrect (at 4.1625 2.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 342 "/Control on separate board/BTN2") (pinfunction "PB12") (pintype "bidirectional") (tstamp 7a39cca6-f1e2-4bb6-ba4a-124c30b198f9)) + (net 341 "/Control on separate board/BTN2") (pinfunction "PB12") (pintype "bidirectional") (tstamp 7a39cca6-f1e2-4bb6-ba4a-124c30b198f9)) (pad "26" smd roundrect (at 4.1625 2.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 343 "/Control on separate board/BTN3") (pinfunction "PB13") (pintype "bidirectional") (tstamp db8093da-43f2-4e29-8b83-d02dd513abf0)) + (net 342 "/Control on separate board/BTN3") (pinfunction "PB13") (pintype "bidirectional") (tstamp db8093da-43f2-4e29-8b83-d02dd513abf0)) (pad "27" smd roundrect (at 4.1625 1.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 197 "/Control on separate board/STATUSn") (pinfunction "PB14") (pintype "bidirectional") (tstamp ccc5873a-50f7-4ee7-930c-a545c135c02a)) + (net 196 "/Control on separate board/STATUSn") (pinfunction "PB14") (pintype "bidirectional") (tstamp ccc5873a-50f7-4ee7-930c-a545c135c02a)) (pad "28" smd roundrect (at 4.1625 1.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 277 "/Control on separate board/PB15") (pinfunction "PB15") (pintype "bidirectional") (tstamp 847116c9-bc11-483c-b1f3-f51ead2505d1)) + (net 276 "/Control on separate board/PB15") (pinfunction "PB15") (pintype "bidirectional") (tstamp 847116c9-bc11-483c-b1f3-f51ead2505d1)) (pad "29" smd roundrect (at 4.1625 0.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 348 "/Control on separate board/PWM_CW") (pinfunction "PA8") (pintype "bidirectional") (tstamp f01e75d0-4766-4fdd-bb27-cca9cf7bab80)) + (net 347 "/Control on separate board/PWM_CW") (pinfunction "PA8") (pintype "bidirectional") (tstamp f01e75d0-4766-4fdd-bb27-cca9cf7bab80)) (pad "30" smd roundrect (at 4.1625 0.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 275 "/Control on separate board/USART1_TX") (pinfunction "PA9") (pintype "bidirectional") (tstamp ad5c1f6e-141d-4a00-8c26-22b261cde08e)) + (net 274 "/Control on separate board/USART1_TX") (pinfunction "PA9") (pintype "bidirectional") (tstamp ad5c1f6e-141d-4a00-8c26-22b261cde08e)) (pad "31" smd roundrect (at 4.1625 -0.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 276 "/Control on separate board/USART1_RX") (pinfunction "PA10") (pintype "bidirectional") (tstamp 95a29ff4-a668-466c-99ce-5167943a3093)) + (net 275 "/Control on separate board/USART1_RX") (pinfunction "PA10") (pintype "bidirectional") (tstamp 95a29ff4-a668-466c-99ce-5167943a3093)) (pad "32" smd roundrect (at 4.1625 -0.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 351 "Net-(R179-Pad2)") (pinfunction "PA11") (pintype "bidirectional") (tstamp b2034657-4e01-42fd-bf2d-0182b2bf33a1)) + (net 350 "Net-(R179-Pad2)") (pinfunction "PA11") (pintype "bidirectional") (tstamp b2034657-4e01-42fd-bf2d-0182b2bf33a1)) (pad "33" smd roundrect (at 4.1625 -1.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 352 "Net-(R180-Pad2)") (pinfunction "PA12") (pintype "bidirectional") (tstamp 9151a40b-6d71-4faa-9350-e38459fed203)) + (net 351 "Net-(R180-Pad2)") (pinfunction "PA12") (pintype "bidirectional") (tstamp 9151a40b-6d71-4faa-9350-e38459fed203)) (pad "34" smd roundrect (at 4.1625 -1.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 283 "/Control on separate board/SWDIO") (pinfunction "PA13") (pintype "bidirectional") (tstamp 894c51d4-caf5-474e-adca-8d8aa4efdaa0)) + (net 282 "/Control on separate board/SWDIO") (pinfunction "PA13") (pintype "bidirectional") (tstamp 894c51d4-caf5-474e-adca-8d8aa4efdaa0)) (pad "35" smd roundrect (at 4.1625 -2.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "VSS") (pintype "power_in") (tstamp 05a3cdf1-cb06-4698-9500-f121f4676d85)) (pad "36" smd roundrect (at 4.1625 -2.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pinfunction "VDD") (pintype "power_in") (tstamp 5942ab5b-9840-4b7e-8c5b-93732b81eb29)) + (net 163 "/Control on separate board/3.3V_UI") (pinfunction "VDD") (pintype "power_in") (tstamp 5942ab5b-9840-4b7e-8c5b-93732b81eb29)) (pad "37" smd roundrect (at 2.75 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 282 "/Control on separate board/SWCLK") (pinfunction "PA14") (pintype "bidirectional") (tstamp 6f7026e4-24a3-46d8-ba15-5baa22e015e6)) + (net 281 "/Control on separate board/SWCLK") (pinfunction "PA14") (pintype "bidirectional") (tstamp 6f7026e4-24a3-46d8-ba15-5baa22e015e6)) (pad "38" smd roundrect (at 2.25 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 234 "/Control on separate board/CW_KEYn") (pinfunction "PA15") (pintype "bidirectional") (tstamp d40d39c5-113b-45a8-9633-8affa3a47811)) + (net 233 "/Control on separate board/CW_KEYn") (pinfunction "PA15") (pintype "bidirectional") (tstamp d40d39c5-113b-45a8-9633-8affa3a47811)) (pad "39" smd roundrect (at 1.75 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 237 "/Control on separate board/EN_RX") (pinfunction "PB3") (pintype "bidirectional") (tstamp 346dfb46-fc67-4d1e-85a2-5694db9208ad)) + (net 236 "/Control on separate board/EN_RX") (pinfunction "PB3") (pintype "bidirectional") (tstamp 346dfb46-fc67-4d1e-85a2-5694db9208ad)) (pad "40" smd roundrect (at 1.25 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 363 "unconnected-(U11-Pad40)") (pinfunction "PB4") (pintype "bidirectional") (tstamp 38078a53-b9e5-4ddc-9015-28ad2d198576)) + (net 362 "unconnected-(U11-Pad40)") (pinfunction "PB4") (pintype "bidirectional") (tstamp 38078a53-b9e5-4ddc-9015-28ad2d198576)) (pad "41" smd roundrect (at 0.75 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 236 "/Control on separate board/EN_TX") (pinfunction "PB5") (pintype "bidirectional") (tstamp b452e453-ef65-494c-96ee-7c38a8104b16)) + (net 235 "/Control on separate board/EN_TX") (pinfunction "PB5") (pintype "bidirectional") (tstamp b452e453-ef65-494c-96ee-7c38a8104b16)) (pad "42" smd roundrect (at 0.25 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 239 "/Control on separate board/SCL") (pinfunction "PB6") (pintype "bidirectional") (tstamp 5851650b-105e-42e3-84a7-87d2b79507ac)) + (net 238 "/Control on separate board/SCL") (pinfunction "PB6") (pintype "bidirectional") (tstamp 5851650b-105e-42e3-84a7-87d2b79507ac)) (pad "43" smd roundrect (at -0.25 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 240 "/Control on separate board/SDA") (pinfunction "PB7") (pintype "bidirectional") (tstamp 19182725-b8ce-4b53-8868-2968f8f29a0b)) + (net 239 "/Control on separate board/SDA") (pinfunction "PB7") (pintype "bidirectional") (tstamp 19182725-b8ce-4b53-8868-2968f8f29a0b)) (pad "44" smd roundrect (at -0.75 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 353 "/Control on separate board/BOOT0") (pinfunction "BOOT0") (pintype "input") (tstamp a79206b9-315b-4a1e-a8d6-78c597220710)) + (net 352 "/Control on separate board/BOOT0") (pinfunction "BOOT0") (pintype "input") (tstamp a79206b9-315b-4a1e-a8d6-78c597220710)) (pad "45" smd roundrect (at -1.25 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 232 "/Control on separate board/CW_TIP") (pinfunction "PB8") (pintype "bidirectional") (tstamp 7504fd34-3acd-4811-8d48-26f75f3ba897)) + (net 231 "/Control on separate board/CW_TIP") (pinfunction "PB8") (pintype "bidirectional") (tstamp 7504fd34-3acd-4811-8d48-26f75f3ba897)) (pad "46" smd roundrect (at -1.75 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 233 "/Control on separate board/CW_RING") (pinfunction "PB9") (pintype "bidirectional") (tstamp 9ebef4f7-71a6-4e4c-8b54-8c6aabb71af5)) + (net 232 "/Control on separate board/CW_RING") (pinfunction "PB9") (pintype "bidirectional") (tstamp 9ebef4f7-71a6-4e4c-8b54-8c6aabb71af5)) (pad "47" smd roundrect (at -2.25 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "VSS") (pintype "power_in") (tstamp 65517e0b-f44a-4407-a2ae-c6ef40da8b94)) (pad "48" smd roundrect (at -2.75 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pinfunction "VDD") (pintype "power_in") (tstamp a2233000-c4c9-4e72-baf4-20009d356777)) + (net 163 "/Control on separate board/3.3V_UI") (pinfunction "VDD") (pintype "power_in") (tstamp a2233000-c4c9-4e72-baf4-20009d356777)) (model "${KICAD6_3DMODEL_DIR}/Package_QFP.3dshapes/LQFP-48_7x7mm_P0.5mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -23716,29 +24026,29 @@ (footprint "TestPoint:TestPoint_Pad_D2.0mm" (layer "F.Cu") (tedit 5A0F774F) (tstamp e9027add-135c-4754-a582-e9a1747430d4) - (at 237.122 -48.502) + (at 177.292 -25.4 90) (descr "SMD pad as test Point, diameter 2.0mm") (tags "test point SMD pad") (property "Sheetfile" "frontend_70.kicad_sch") (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/2c05455a-0526-4875-942a-bdc2a73ea438") (attr exclude_from_pos_files) - (fp_text reference "TP6" (at 0 -1.998) (layer "F.SilkS") + (fp_text reference "TP6" (at 0 -1.998 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 53bdda4c-4c6e-4f0f-abf7-772822ab5b31) ) - (fp_text value "VG" (at 0 2.05) (layer "F.Fab") + (fp_text value "VG" (at 0 2.05 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 422baaf4-6592-4109-b8d0-d82d772bd0b9) ) - (fp_text user "${REFERENCE}" (at 0 -2) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 -2 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 1db0f9f8-05a1-41ed-9fcb-fbfa0088e951) ) (fp_circle (center 0 0) (end 0 1.2) (layer "F.SilkS") (width 0.12) (fill none) (tstamp 16a6bc7a-73c7-4645-943c-cd6a91c765aa)) (fp_circle (center 0 0) (end 1.5 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp acbf2a5b-4513-46bf-b027-694fd4db0aca)) - (pad "1" smd circle (at 0 0) (size 2 2) (layers "F.Cu" "F.Mask") - (net 117 "Net-(C108-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 7d69c617-e2ea-4f45-8936-d837ca81c2f2)) + (pad "1" smd circle (at 0 0 90) (size 2 2) (layers "F.Cu" "F.Mask") + (net 116 "Net-(C108-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 7d69c617-e2ea-4f45-8936-d837ca81c2f2)) ) (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") @@ -23818,7 +24128,7 @@ (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 5553192c-4259-469e-8573-d9c7267583e5)) (fp_line (start 1.25 1) (end -1.25 1) (layer "F.Fab") (width 0.1) (tstamp f1ab70b3-4a56-48b9-8dee-3f3ae93c4b3e)) (pad "1" smd roundrect (at -1.1625 0 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 288 "Net-(L14-Pad1)") (pinfunction "1") (pintype "passive") (tstamp fcad6fe4-60d7-4eab-acfa-609d81ee9ed8)) + (net 287 "Net-(L14-Pad1)") (pinfunction "1") (pintype "passive") (tstamp fcad6fe4-60d7-4eab-acfa-609d81ee9ed8)) (pad "2" smd roundrect (at 1.1625 0 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 96 "Net-(C81-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 09dc317e-37bd-4d8c-8b0f-a8f4ff0e76fb)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" @@ -23919,7 +24229,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp ea4606ef-7d6d-4238-a6a9-8f1c927596d3) - (at 210.112 -31.942) + (at 136.398 -30.226 -90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -23928,15 +24238,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/ae64fde0-d97f-440a-8923-de5d4e7a09fb") (attr smd) - (fp_text reference "C93" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "C93" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 998a158c-7711-425a-8baa-224a3a56b3ac) ) - (fp_text value "4.7pF" (at 0 1.43) (layer "F.Fab") + (fp_text value "4.7pF" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 00931bb2-a9f7-44be-8952-9f01531a463e) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp ad18c3e9-150b-43e5-92cb-8a3bf7ff8aa8) ) @@ -23950,10 +24260,10 @@ (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 81a0e654-45ba-4085-a75d-449d697e3e5f)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 886bf402-8e4d-4ce0-81ec-ac2c33247cc1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp d1bfb1f2-f91a-4beb-93db-c1ecebc58a21)) - (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 106 "Net-(C93-Pad1)") (pintype "passive") (tstamp 95d37444-a615-4e52-955a-f0bfc11e28a4)) - (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 105 "/70MHz VHF Frontend/VHF_RX") (pintype "passive") (tstamp be87124a-aa9a-42be-b8f5-70fedb3a792a)) + (pad "1" smd roundrect (at -0.8625 0 270) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 105 "Net-(C93-Pad1)") (pintype "passive") (tstamp 95d37444-a615-4e52-955a-f0bfc11e28a4)) + (pad "2" smd roundrect (at 0.8625 0 270) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 104 "/70MHz VHF Frontend/VHF_RX") (pintype "passive") (tstamp be87124a-aa9a-42be-b8f5-70fedb3a792a)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -23963,7 +24273,7 @@ (footprint "TestPoint:TestPoint_Pad_D2.0mm" (layer "F.Cu") (tedit 5A0F774F) (tstamp ea496dfc-6124-4687-ab14-9639574a8cd2) - (at 199.462 -11.732) + (at 175.26 -35.052) (descr "SMD pad as test Point, diameter 2.0mm") (tags "test point SMD pad") (property "Need_order" "0") @@ -23986,7 +24296,7 @@ (fp_circle (center 0 0) (end 0 1.2) (layer "F.SilkS") (width 0.12) (fill none) (tstamp 8583c0de-5837-48df-bd36-00dbecd4bbbc)) (fp_circle (center 0 0) (end 1.5 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp f719718d-955a-4934-9885-e65bfc7d136e)) (pad "1" smd circle (at 0 0) (size 2 2) (layers "F.Cu" "F.Mask") - (net 114 "Net-(C104-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 2b7cf784-b794-4aa9-b4e3-3fff23e6d2a1)) + (net 113 "Net-(C104-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 2b7cf784-b794-4aa9-b4e3-3fff23e6d2a1)) ) (footprint "Button_Switch_THT:SW_PUSH_6mm" (layer "F.Cu") @@ -24039,9 +24349,9 @@ (pad "1" thru_hole circle (at 0 0 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "1") (pintype "passive") (tstamp fb678f2c-35df-4123-8057-150f18576b9e)) (pad "2" thru_hole circle (at 0 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) - (net 341 "/Control on separate board/BTN1") (pinfunction "2") (pintype "passive") (tstamp 4f62e26c-1910-428d-ae8a-b2a68ffb816c)) + (net 340 "/Control on separate board/BTN1") (pinfunction "2") (pintype "passive") (tstamp 4f62e26c-1910-428d-ae8a-b2a68ffb816c)) (pad "2" thru_hole circle (at 6.5 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) - (net 341 "/Control on separate board/BTN1") (pinfunction "2") (pintype "passive") (tstamp a528b481-6c7a-45e3-8042-ed3df1a841cf)) + (net 340 "/Control on separate board/BTN1") (pinfunction "2") (pintype "passive") (tstamp a528b481-6c7a-45e3-8042-ed3df1a841cf)) (model "${KICAD6_3DMODEL_DIR}/Button_Switch_THT.3dshapes/SW_PUSH_6mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -24051,7 +24361,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp eab834b0-8db9-4ced-8a0a-68b330efb958) - (at 206.625 78.315) + (at 45.223 169.755) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "") @@ -24126,9 +24436,9 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 865d1391-9072-48f3-9418-27704d27ae8c)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp ea882016-f98c-4cb0-8ecf-fa11cbd45d3d)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 343 "/Control on separate board/BTN3") (pintype "passive") (tstamp 97d8bfac-39d2-4a1f-a1b2-928db7ca7d92)) + (net 342 "/Control on separate board/BTN3") (pintype "passive") (tstamp 97d8bfac-39d2-4a1f-a1b2-928db7ca7d92)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp b8d7b325-6364-4769-9d03-bc4eb9aef62e)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp b8d7b325-6364-4769-9d03-bc4eb9aef62e)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -24138,7 +24448,7 @@ (footprint "TestPoint:TestPoint_Pad_D2.0mm" (layer "F.Cu") (tedit 5A0F774F) (tstamp eb1a7c42-a833-4780-8a0f-8ce42b853775) - (at 208.862 -20.692) + (at 243.459 -4.699) (descr "SMD pad as test Point, diameter 2.0mm") (tags "test point SMD pad") (property "Sheetfile" "frontend_70.kicad_sch") @@ -24160,36 +24470,98 @@ (fp_circle (center 0 0) (end 0 1.2) (layer "F.SilkS") (width 0.12) (fill none) (tstamp e73f9d46-859e-4341-9587-a81c69b79507)) (fp_circle (center 0 0) (end 1.5 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp 105e502e-aa1e-4113-9e74-3d37551dbe61)) (pad "1" smd circle (at 0 0) (size 2 2) (layers "F.Cu" "F.Mask") - (net 129 "Net-(C120-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 5dd8096f-fd75-4768-88cb-e05fe46ef1bf)) + (net 128 "Net-(C120-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 5dd8096f-fd75-4768-88cb-e05fe46ef1bf)) ) - (footprint "mpb:AirCoil-8mm" (layer "F.Cu") + (footprint "mpb:AirCoil-8mm-or-2-series-1008" (layer "F.Cu") (tedit 5E4EB890) (tstamp ec0fe90c-07a2-48b2-8f81-ed2747fd4162) - (at 205.222 -55.932) - (property "MPN" "") - (property "Need_order" "0") + (at 94.986 -45.518) + (property "MPN" "2x LQW2UASR56") + (property "Need_order" "1") (property "Sheetfile" "frontend_70.kicad_sch") (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/1f6fe2b8-ca02-48d7-a3d2-79857b6bdbef") (attr through_hole) - (fp_text reference "L37" (at 1.5 0 90) (layer "F.SilkS") + (fp_text reference "L37" (at 2.5 0 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) - (tstamp c45deefe-bc30-4875-8020-28a01b722773) + (tstamp bd1e866c-f9e9-49c6-97a2-57937c5edfa2) ) (fp_text value "110nH" (at -2.5 0 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) - (tstamp 71c03dfa-699d-43af-bd77-f4e48fa2ce20) - ) - (fp_line (start 3.5 -6) (end -3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp 033d3b1b-b9e9-4043-bbd5-1c0ab33a667e)) - (fp_line (start 3.5 6) (end 3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp a4b4957e-41e7-4f68-b3dc-2cdf7f268582)) - (fp_line (start -3.5 6) (end 3.5 6) (layer "F.SilkS") (width 0.15) (tstamp ab13b04a-9f3c-42f9-ac57-2baf68c27151)) - (fp_line (start -3.5 -6) (end -3.5 6) (layer "F.SilkS") (width 0.15) (tstamp fefc3da3-9921-4f1b-be70-d22c7e9b9767)) - (fp_arc (start 0 0) (mid -1.5 -1.5) (end 0 -3) (layer "F.SilkS") (width 0.15) (tstamp 121333e0-fabc-41b8-b8a5-255450e24785)) - (fp_arc (start 0 3) (mid -1.5 1.5) (end 0 0) (layer "F.SilkS") (width 0.15) (tstamp db7d72d4-e242-4295-9087-aa1dcdb0d3ec)) + (tstamp a8d47ba4-4241-481d-b6c2-6f7272fb3e18) + ) + (fp_line (start -3.5 -6) (end -3.5 6) (layer "F.SilkS") (width 0.15) (tstamp 3a41ad27-ed85-4781-9ec3-c70c5f787e09)) + (fp_line (start 3.5 -6) (end -3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp bbfee780-3cd6-4bb9-91ed-40cf72941c19)) + (fp_line (start 3.5 6) (end 3.5 -6) (layer "F.SilkS") (width 0.15) (tstamp bc4e9eb9-8658-424a-8e74-1ca52a90584a)) + (fp_line (start -3.5 6) (end 3.5 6) (layer "F.SilkS") (width 0.15) (tstamp c98fc2f4-afa2-4463-9c48-170ef7bec885)) + (fp_arc (start -1.1 0) (mid -2.6 -1.5) (end -1.1 -3) (layer "F.SilkS") (width 0.15) (tstamp 093fc5a2-876c-4e8c-9afe-ec0f89a40775)) + (fp_arc (start -1.1 3) (mid -2.6 1.5) (end -1.1 0) (layer "F.SilkS") (width 0.15) (tstamp 6fa2e40d-8ed8-45bd-aecd-339d56977237)) + (fp_line (start -3.3 -5.8) (end 3.3 -5.8) (layer "F.CrtYd") (width 0.05) (tstamp 0aa3fed2-07d5-4e14-b21d-0bd999908daa)) + (fp_line (start -3.3 5.8) (end -3.3 -5.8) (layer "F.CrtYd") (width 0.05) (tstamp 7b1d9b74-85f6-4116-9166-751587f8d016)) + (fp_line (start 3.3 5.8) (end -3.3 5.8) (layer "F.CrtYd") (width 0.05) (tstamp 8f7b90b2-5d8f-4108-ad1c-85a0cb545d94)) + (fp_line (start 3.3 5.8) (end 3.3 -5.8) (layer "F.CrtYd") (width 0.05) (tstamp cb1296fc-1b32-4fcb-a134-8800f3c90df0)) + (fp_line (start 1.05 -2.87) (end 1.05 -0.37) (layer "F.Fab") (width 0.1) (tstamp 05181c4a-f341-47c2-8d25-258e00e6e177)) + (fp_line (start -0.95 0.23) (end 1.05 0.23) (layer "F.Fab") (width 0.1) (tstamp 0cea762c-81cf-4c48-805a-714f3445aad2)) + (fp_line (start 1.05 0.23) (end 1.05 2.73) (layer "F.Fab") (width 0.1) (tstamp 3e7037db-9c44-4230-9f5f-25c52c61a2ab)) + (fp_line (start 1.05 -0.37) (end -0.95 -0.37) (layer "F.Fab") (width 0.1) (tstamp 44f89e69-ca4d-4561-90e6-3f22c1f8f827)) + (fp_line (start -0.95 -0.37) (end -0.95 -2.87) (layer "F.Fab") (width 0.1) (tstamp 7a7eeb93-89b5-49cc-96dd-06125fd2ed1b)) + (fp_line (start -0.95 2.73) (end -0.95 0.23) (layer "F.Fab") (width 0.1) (tstamp b2e96215-2d1b-4aba-885f-1ed62ad9e226)) + (fp_line (start 1.05 2.73) (end -0.95 2.73) (layer "F.Fab") (width 0.1) (tstamp d73ae510-1fce-4a87-b268-11a5022067ce)) + (fp_line (start -0.95 -2.87) (end 1.05 -2.87) (layer "F.Fab") (width 0.1) (tstamp f94596f4-265f-4d5f-8dee-c9d7e4bc7c51)) + (pad "" smd roundrect (at 0.05 -0.4575 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp 8268e64f-3ca2-467b-bf51-78bdfe5e2e6a)) + (pad "" smd roundrect (at 0.05 0.3175 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp a661b0a4-6b3f-4fdb-9da0-c046dd690dff)) (pad "1" thru_hole circle (at 0 -4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 132 "Net-(C126-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 157ea42d-f857-4602-9a7f-6338587dd0e1)) + (net 131 "Net-(C126-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 937c3073-b1b4-4633-9d3c-c407bf84679c)) + (pad "1" smd roundrect (at 0.05 -2.7825 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 131 "Net-(C126-Pad1)") (pinfunction "1") (pintype "passive") (tstamp cb3cfc10-d271-45b7-bc05-ae78f6f44633)) (pad "2" thru_hole circle (at 0 4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp c45a5a43-6bab-4403-af4b-59125b84100e)) + (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 8333b5ae-76f5-4cac-8923-1b1419a3bfe5)) + (pad "2" smd roundrect (at 0.05 2.6425 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp a9216534-cd85-466d-9ddc-a8b75b83f348)) + ) + + (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEF0) (tstamp ec6024c7-cab6-408d-9df4-2443dc715000) + (at 211.836 -6.604 -90) + (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") + (tags "inductor handsolder") + (property "MPN" "LQW2UASR56") + (property "Need_order" "1") + (property "Sheetfile" "frontend_70.kicad_sch") + (property "Sheetname" "70MHz VHF Frontend") + (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/b8f391ff-7937-425d-aa2d-d3c01535962b") + (attr smd) + (fp_text reference "L27" (at 0 -2.05 90) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 2faff506-eea4-41f4-86a2-93aa98322cd5) + ) + (fp_text value "56nH" (at 0 2.05 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 3a630521-7f32-47e9-91d6-de8f01446699) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.62 0.62) (thickness 0.09))) + (tstamp 93224de8-3fe5-48be-80e0-6283d83fb177) + ) + (fp_line (start -0.261252 -1.11) (end 0.261252 -1.11) (layer "F.SilkS") (width 0.12) (tstamp 06375b7d-7ec1-44c8-9ee6-24c26768056c)) + (fp_line (start -0.261252 1.11) (end 0.261252 1.11) (layer "F.SilkS") (width 0.12) (tstamp 3191aed6-fa65-4670-b500-8a447ccd19e5)) + (fp_line (start 2.12 -1.35) (end 2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp 0a328c4f-858a-4ba4-ae27-0225fa6b3964)) + (fp_line (start -2.12 1.35) (end -2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 674f76da-93f4-491d-8ac0-3a8efcef18fa)) + (fp_line (start -2.12 -1.35) (end 2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 8b0dfb25-1f4a-498d-b765-aa24a82fb36f)) + (fp_line (start 2.12 1.35) (end -2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp a576ba14-3f08-46e8-bd51-9ed0aa673b26)) + (fp_line (start 1.25 -1) (end 1.25 1) (layer "F.Fab") (width 0.1) (tstamp 077c38e4-588b-452a-878e-26069a92a609)) + (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 2412bdd9-8a42-4b2b-bf37-bd53ad0bef0c)) + (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 3c091c5a-c2ac-4823-a189-85a70ee0ccc1)) + (fp_line (start 1.25 1) (end -1.25 1) (layer "F.Fab") (width 0.1) (tstamp e19ccf88-3ac4-4ff7-a110-34f52868b303)) + (pad "1" smd roundrect (at -1.1625 0 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 108 "Net-(C96-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 464dc3aa-ffbd-43e7-9e62-ce757253379f)) + (pad "2" smd roundrect (at 1.1625 0 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 372 "Net-(L27-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 925869bb-7178-47c7-bf5d-1b749fcb694f)) + (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) ) (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") @@ -24368,7 +24740,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp efe22b82-8656-4f72-a93a-9a4228c10156) - (at 83.82 -29.21) + (at -49.19 70.896) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -24446,7 +24818,7 @@ (fp_line (start 0.65 -1.45) (end 0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp b13afe07-d029-47d3-ab4e-a5063b9278fd)) (fp_line (start -0.65 -1.125) (end -0.325 -1.45) (layer "F.Fab") (width 0.1) (tstamp eeb9a862-df63-43cc-9125-4b858a22dffe)) (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 309 "Net-(Q16-Pad2)") (pinfunction "D") (pintype "passive") (tstamp e113e7cf-f54a-4f6d-8f23-39e290799c2f)) + (net 308 "Net-(Q16-Pad2)") (pinfunction "D") (pintype "passive") (tstamp e113e7cf-f54a-4f6d-8f23-39e290799c2f)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 78 "Net-(C66-Pad2)") (pinfunction "S") (pintype "passive") (tstamp d33686b0-d7e4-44b9-83e1-41db12d3f770)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) @@ -24561,13 +24933,13 @@ (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "AA") (pintype "passive") (tstamp fc5d6e94-b09f-4888-9621-1609e53b4a67)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 323 "Net-(R31-Pad1)") (pinfunction "AB") (pintype "passive") (tstamp 8090eb64-f77c-4f5b-af15-0ba87a5aef43)) + (net 322 "Net-(R31-Pad1)") (pinfunction "AB") (pintype "passive") (tstamp 8090eb64-f77c-4f5b-af15-0ba87a5aef43)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 173 "Net-(D5-Pad1)") (pinfunction "SA") (pintype "passive") (tstamp 7555088a-1fb3-45c0-806b-f4cc45e7ec19)) + (net 172 "Net-(D5-Pad1)") (pinfunction "SA") (pintype "passive") (tstamp 7555088a-1fb3-45c0-806b-f4cc45e7ec19)) (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 47 "Net-(C43-Pad2)") (pinfunction "SC") (pintype "passive") (tstamp e3b06907-1ed9-4e62-9c46-65e97418fb41)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 174 "Net-(D5-Pad2)") (pinfunction "SB") (pintype "passive") (tstamp 82c6f0b8-c347-48f4-8328-9362ffddf9ef)) + (net 173 "Net-(D5-Pad2)") (pinfunction "SB") (pintype "passive") (tstamp 82c6f0b8-c347-48f4-8328-9362ffddf9ef)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x05_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -24640,7 +25012,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp f25cf591-c328-4d45-a8ec-753bf6a865b5) - (at 195.792 -24.502) + (at 149.86 -26.162 90) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "08051A471GAT2A") @@ -24649,15 +25021,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/e918ea92-0301-4e11-a69f-88ed77379625") (attr smd) - (fp_text reference "C98" (at 0 -1.68) (layer "F.SilkS") + (fp_text reference "C98" (at 0 -1.68 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 22fcb03b-f5f7-4d0b-9e92-d2eea102f1d6) ) - (fp_text value "470pF" (at 0 1.68) (layer "F.Fab") + (fp_text value "470pF" (at 0 1.68 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 57f4a02e-9d46-4f4c-b775-ec4ad1883fa9) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.08))) (tstamp c8f25f79-f99b-4b60-b377-1d15dc89e200) ) @@ -24671,10 +25043,10 @@ (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 18ff2d80-d628-4d53-9032-0c2707bd68c9)) (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp b3713168-d6c9-47fd-b827-9d6e280376e5)) (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp e83cbfc9-1742-45bf-8698-9b390a8474b2)) - (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 104 "Net-(C100-Pad1)") (pintype "passive") (tstamp 9c8dc681-8b6c-43ec-8e76-83c7fe9d7f8b)) - (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 110 "Net-(C100-Pad2)") (pintype "passive") (tstamp e8560cfb-720d-48f7-84b6-188018712876)) + (pad "1" smd roundrect (at -1.0375 0 90) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 2 "GND") (pintype "passive") (tstamp 9c8dc681-8b6c-43ec-8e76-83c7fe9d7f8b)) + (pad "2" smd roundrect (at 1.0375 0 90) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 109 "Net-(C100-Pad2)") (pintype "passive") (tstamp e8560cfb-720d-48f7-84b6-188018712876)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -24821,7 +25193,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp f3d70954-96dc-432b-af94-cc60f3cca8c0) - (at 349.934 -57.204) + (at 144.575 198.701) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -24849,7 +25221,7 @@ (footprint "Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical" (layer "F.Cu") (tedit 59FED5CC) (tstamp f3defa40-661f-4602-a34e-26900f90e194) - (at 235.585 55.895) + (at 115.526 147.411) (descr "Through hole straight pin header, 1x08, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x08 2.54mm single row") (property "MPN" "SSW-108-01-G-S") @@ -24886,21 +25258,21 @@ (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp d5169010-234a-487c-9586-228e06ea2529)) (fp_line (start 1.27 -1.27) (end 1.27 19.05) (layer "F.Fab") (width 0.1) (tstamp fc90a7f5-9c5f-4f40-9f72-7f5489a9d4f8)) (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 140 "/PA 70MHz/12V") (pinfunction "Pin_1") (pintype "passive") (tstamp f0d0e876-4189-444e-8118-73e62566dee9)) + (net 139 "/PA 70MHz/12V") (pinfunction "Pin_1") (pintype "passive") (tstamp f0d0e876-4189-444e-8118-73e62566dee9)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 140 "/PA 70MHz/12V") (pinfunction "Pin_2") (pintype "passive") (tstamp d5b975fc-4d0e-4670-898e-3bd16ebde2c8)) + (net 139 "/PA 70MHz/12V") (pinfunction "Pin_2") (pintype "passive") (tstamp d5b975fc-4d0e-4670-898e-3bd16ebde2c8)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 140 "/PA 70MHz/12V") (pinfunction "Pin_3") (pintype "passive") (tstamp 14a7910b-8e6f-4b55-898b-842f851bbe85)) + (net 139 "/PA 70MHz/12V") (pinfunction "Pin_3") (pintype "passive") (tstamp 14a7910b-8e6f-4b55-898b-842f851bbe85)) (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_4") (pintype "passive") (tstamp d036f82b-2013-4a33-92d2-f4f8e8ffc8ca)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 259 "/PA 70MHz/PA_IN") (pinfunction "Pin_5") (pintype "passive") (tstamp b7349658-3312-48ef-bf70-ceae960e8dad)) + (net 258 "/PA 70MHz/PA_IN") (pinfunction "Pin_5") (pintype "passive") (tstamp b7349658-3312-48ef-bf70-ceae960e8dad)) (pad "6" thru_hole oval (at 0 12.7) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_6") (pintype "passive") (tstamp c56b4782-1213-4d86-8b34-91c23578ba08)) (pad "7" thru_hole oval (at 0 15.24) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_7") (pintype "passive") (tstamp 36a1e9ef-a557-4a50-a697-9cb1cea6e523)) (pad "8" thru_hole oval (at 0 17.78) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 260 "/PA 70MHz/EN_PA") (pinfunction "Pin_8") (pintype "passive") (tstamp c11124f5-c7ae-4ca8-ac10-dca45613ef33)) + (net 259 "/PA 70MHz/EN_PA") (pinfunction "Pin_8") (pintype "passive") (tstamp c11124f5-c7ae-4ca8-ac10-dca45613ef33)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x08_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -24910,7 +25282,7 @@ (footprint "Crystal:Crystal_HC49-U_Vertical" (layer "F.Cu") (tedit 5A1AD3B8) (tstamp f3fbfdb4-d9cc-4617-b4a4-807273609d75) - (at 217.965 57.46 180) + (at 56.563 148.9 180) (descr "Crystal THT HC-49/U http://5hertz.com/pdfs/04404_D.pdf") (tags "THT crystalHC-49/U") (property "MPN" "ECS-110.5-32-1X") @@ -24992,7 +25364,7 @@ (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp e983f476-fb53-4802-82f0-4beccf94079a)) (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp ff9dd614-ba2e-4fb1-a597-e13ea9cf5c41)) (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 163 "/Control on separate board/ENC_A") (pintype "passive") (tstamp 2e7c1ee7-1381-4e15-b55a-cf21d5e606c4)) + (net 162 "/Control on separate board/ENC_A") (pintype "passive") (tstamp 2e7c1ee7-1381-4e15-b55a-cf21d5e606c4)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp fb3f5920-c215-42ee-b707-a6afeab513d6)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" @@ -25038,7 +25410,7 @@ (pad "1" smd roundrect (at -0.875 0) (size 1.05 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 3 "Net-(C2-Pad1)") (pintype "passive") (tstamp f04f26e9-c403-404e-963a-3a5eecc5e22a)) (pad "2" smd roundrect (at 0.875 0) (size 1.05 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 215 "Net-(FB1-Pad2)") (pintype "passive") (tstamp 2ff9594c-f76b-440e-a55a-cea5201de738)) + (net 214 "Net-(FB1-Pad2)") (pintype "passive") (tstamp 2ff9594c-f76b-440e-a55a-cea5201de738)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -25171,11 +25543,11 @@ (fp_line (start 0.675 -1.1) (end -0.175 -1.1) (layer "F.Fab") (width 0.1) (tstamp 9f0da279-1384-4140-b8ad-e6e47cf03a3f)) (fp_line (start -0.175 -1.1) (end -0.675 -0.6) (layer "F.Fab") (width 0.1) (tstamp a18ef8c8-b9c4-4d8e-9fe7-1c3e894ecbb1)) (pad "1" smd rect (at -1.33 -0.65 180) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 192 "Net-(D18-Pad2)") (pintype "passive") (tstamp 11995a27-e8d3-4ccc-bf9d-aaf09d5d78aa)) + (net 191 "Net-(D18-Pad2)") (pintype "passive") (tstamp 11995a27-e8d3-4ccc-bf9d-aaf09d5d78aa)) (pad "2" smd rect (at -1.33 0.65 180) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 191 "Net-(D18-Pad1)") (pintype "passive") (tstamp 3fceba71-f4ab-4d2a-bff0-8800400bceaa)) + (net 190 "Net-(D18-Pad1)") (pintype "passive") (tstamp 3fceba71-f4ab-4d2a-bff0-8800400bceaa)) (pad "3" smd rect (at 1.33 0 180) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 194 "Net-(D19-Pad3)") (pintype "passive") (tstamp af76aed6-4e96-433d-95ae-bba9b7bc0c44)) + (net 193 "Net-(D19-Pad3)") (pintype "passive") (tstamp af76aed6-4e96-433d-95ae-bba9b7bc0c44)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-323_SC-70.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -25236,7 +25608,7 @@ (fp_line (start -6.4 0) (end -5.76 7.62) (layer "F.Fab") (width 0.1) (tstamp e7b10efc-a355-4f07-9256-257ee01cc247)) (fp_line (start -6.4 7.62) (end 6.4 7.62) (layer "F.Fab") (width 0.1) (tstamp f2defc3e-3cbe-4f50-bffa-2e2033252f6c)) (pad "1" thru_hole circle (at 0 0 90) (size 3 3) (drill 1.5) (layers *.Cu *.Mask) - (net 181 "Net-(D10-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 499146c7-290f-4d07-8568-d5d8410c2f2c)) + (net 180 "Net-(D10-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 499146c7-290f-4d07-8568-d5d8410c2f2c)) (pad "2" thru_hole circle (at 0 7.62 90) (size 3 3) (drill 1.5) (layers *.Cu *.Mask) (net 91 "Net-(C76-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 1eb34273-a9d9-4337-96b0-985966f59322)) (model "${KICAD6_3DMODEL_DIR}/Inductor_THT.3dshapes/L_Toroid_Vertical_L16.0mm_W8.0mm_P7.62mm.wrl" @@ -25271,7 +25643,7 @@ (fp_circle (center 0 0) (end 0 0.95) (layer "F.SilkS") (width 0.12) (fill none) (tstamp 0c2f330a-7b26-44b5-9857-035530f31c74)) (fp_circle (center 0 0) (end 1.25 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp e7631199-b8bc-42ba-bf99-d8f668a5c137)) (pad "1" smd circle (at 0 0) (size 1.5 1.5) (layers "F.Cu" "F.Mask") - (net 326 "Net-(R36-Pad1)") (pinfunction "1") (pintype "passive") (tstamp a49bbda0-57b8-4267-94f8-da866946d461)) + (net 325 "Net-(R36-Pad1)") (pinfunction "1") (pintype "passive") (tstamp a49bbda0-57b8-4267-94f8-da866946d461)) ) (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") @@ -25319,7 +25691,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp fa66eb4c-ca0d-4a6a-85f0-4ae0207d4321) - (at 94.37 -43.21) + (at -38.64 56.896) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -25350,9 +25722,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp ae314b16-a8de-499c-adfd-c8ec6f4577fb)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp ce0fc53c-d022-4025-8e5c-111b796f3238)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 263 "+VTX") (pintype "passive") (tstamp 142670b0-4c3b-45fc-b076-faa0d21007f5)) + (net 262 "+VTX") (pintype "passive") (tstamp 142670b0-4c3b-45fc-b076-faa0d21007f5)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 172 "Net-(D2-Pad1)") (pintype "passive") (tstamp da24a231-ce38-4ded-ac37-38e8031558ab)) + (net 171 "Net-(D2-Pad1)") (pintype "passive") (tstamp da24a231-ce38-4ded-ac37-38e8031558ab)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -25400,7 +25772,7 @@ (pad "1" thru_hole rect (at 0 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 6 "+9VA") (pinfunction "Pin_1") (pintype "passive") (tstamp 0e2595ae-318f-43c9-b10a-22f549bc6ac0)) (pad "2" thru_hole oval (at 0 2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 247 "/Baseband/CW_KEYn") (pinfunction "Pin_2") (pintype "passive") (tstamp 27ae7d4a-62bd-4ff9-a3d1-6c73cb192eb2)) + (net 246 "/Baseband/CW_KEYn") (pinfunction "Pin_2") (pintype "passive") (tstamp 27ae7d4a-62bd-4ff9-a3d1-6c73cb192eb2)) (pad "3" thru_hole oval (at 0 5.08 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 103 "Net-(C90-Pad2)") (pinfunction "Pin_3") (pintype "passive") (tstamp 58f088d1-c9e6-402d-8823-e161257f6c46)) (pad "4" thru_hole oval (at 0 7.62 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) @@ -25445,9 +25817,9 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp dbebe383-e8ca-4080-b942-f5728a46c651)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp ef424c58-9669-44b6-843c-273a9337a98e)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp b6f118c7-fd6f-42da-90de-59b377ae819f)) + (net 163 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp b6f118c7-fd6f-42da-90de-59b377ae819f)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 240 "/Control on separate board/SDA") (pintype "passive") (tstamp 7fab4788-15b9-4d5e-88b8-aa783bc5f238)) + (net 239 "/Control on separate board/SDA") (pintype "passive") (tstamp 7fab4788-15b9-4d5e-88b8-aa783bc5f238)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -25534,7 +25906,7 @@ (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 2d0bef56-c589-430f-8c36-d2cb703d9291)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 324 "Net-(R31-Pad2)") (pintype "passive") (tstamp 319f8e91-2556-4fd7-88e8-3b8ad21368d0)) + (net 323 "Net-(R31-Pad2)") (pintype "passive") (tstamp 319f8e91-2556-4fd7-88e8-3b8ad21368d0)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -25544,7 +25916,7 @@ (footprint "mpb:AirCoil-20mm" (layer "F.Cu") (tedit 5E4EB890) (tstamp fc77338a-d175-4df5-948d-380495ae3c53) - (at 163.902 -31.082) + (at 53.666 -20.668) (property "MPN" "") (property "Need_order" "0") (property "Sheetfile" "frontend_70.kicad_sch") @@ -25569,14 +25941,14 @@ (fp_arc (start 0 4.5) (mid -1.5 3) (end 0 1.5) (layer "F.SilkS") (width 0.15) (tstamp 2ed7d532-c7e0-4ac4-8bce-128af767e8c0)) (fp_arc (start 0 -1.5) (mid -1.5 -3) (end 0 -4.5) (layer "F.SilkS") (width 0.15) (tstamp 2f0e98f8-c669-463d-aac1-5969090c3f63)) (pad "1" thru_hole circle locked (at 0 -7.5) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 106 "Net-(C93-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 1cbe861b-301d-4731-ab76-59647c9b378b)) + (net 105 "Net-(C93-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 1cbe861b-301d-4731-ab76-59647c9b378b)) (pad "2" thru_hole circle locked (at 0 7.5) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 110 "Net-(C100-Pad2)") (pinfunction "2") (pintype "passive") (tstamp e4c5a755-45a7-4125-82cf-0ab4c2ac9a33)) + (net 109 "Net-(C100-Pad2)") (pinfunction "2") (pintype "passive") (tstamp e4c5a755-45a7-4125-82cf-0ab4c2ac9a33)) ) (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp fc8c67c0-6ec9-47fe-986d-b1ea7c56cfbf) - (at 195.58 44.45) + (at 34.178 135.89) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -25604,7 +25976,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp fd14871e-6838-439c-a3be-14dcd0140ab3) - (at 227.652 -42.642) + (at 159.766 -28.702 -90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -25612,15 +25984,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/8b7bc255-63d3-4e70-82d0-7813ad6b90d2") (attr smd) - (fp_text reference "R110" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R110" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 2b6dc739-ac12-42a3-b129-b02fd39ff934) ) - (fp_text value "10k" (at 0 1.43) (layer "F.Fab") + (fp_text value "10k" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 1ddc9978-0575-4c61-9167-951049add8c5) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp d5478098-18d9-42e0-9457-0cea5f6bfe81) ) @@ -25634,9 +26006,9 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp b7c89908-a290-48ab-bb5c-320eb6a0accd)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e1ac0d98-e353-4c55-bb4c-d6bedba72f90)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp ec768303-15eb-4adc-9a6a-2435879773a6)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 112 "Net-(C102-Pad2)") (pintype "passive") (tstamp 4ca49a6e-85cb-428f-8462-eaa4ad359345)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 111 "Net-(C102-Pad2)") (pintype "passive") (tstamp 4ca49a6e-85cb-428f-8462-eaa4ad359345)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 943adceb-99ee-449b-a3a8-8a09891ec673)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) @@ -25647,7 +26019,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp fd214739-07cc-4ef4-ac85-52b4b93ba239) - (at 245.992 -61.252) + (at 207.01 -7.112) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -25679,9 +26051,9 @@ (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 8299f317-ffae-4eee-aae4-82bc971ab149)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp a114f84c-2b3a-4e1d-9cfb-da95a168fa16)) (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 108 "Net-(C94-Pad2)") (pintype "passive") (tstamp cc827814-c4d4-487d-8f3a-46c514365127)) + (net 107 "Net-(C94-Pad2)") (pintype "passive") (tstamp cc827814-c4d4-487d-8f3a-46c514365127)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 109 "Net-(C96-Pad2)") (pintype "passive") (tstamp 87026387-027f-4233-8d43-23354fe32a19)) + (net 108 "Net-(C96-Pad2)") (pintype "passive") (tstamp 87026387-027f-4233-8d43-23354fe32a19)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -25691,7 +26063,7 @@ (footprint "Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp fe252a36-3d2e-4daf-aae7-b62bf6a7a6b5) - (at 339.564 -33.894) + (at 134.205 222.011) (descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "TAJA106K016RNJ") @@ -25723,7 +26095,7 @@ (fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer "F.Fab") (width 0.1) (tstamp ec9d2ad6-5c48-4553-997a-e75de66968fe)) (fp_line (start -1.6 1.25) (end -1.6 -1.25) (layer "F.Fab") (width 0.1) (tstamp f5c61b05-eced-48b0-bd47-2f7b2418d9a6)) (pad "1" smd roundrect (at -1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) - (net 154 "Net-(C152-Pad1)") (pintype "passive") (tstamp 1e596b65-d60a-4283-9bc2-5446d2665631)) + (net 153 "Net-(C152-Pad1)") (pintype "passive") (tstamp 1e596b65-d60a-4283-9bc2-5446d2665631)) (pad "2" smd roundrect (at 1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) (net 2 "GND") (pintype "passive") (tstamp 56f59782-a86b-4428-92ce-eedaa0921865)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" @@ -25811,7 +26183,7 @@ (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp ac59d5eb-dd70-42c3-b29a-b80ee16d259c)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp e1d0a72f-f90b-4eb8-b82d-ee6a508a4af5)) (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 165 "Net-(C169-Pad1)") (pintype "passive") (tstamp c9dc5aeb-1ace-4651-b463-aa02b1132476)) + (net 164 "Net-(C169-Pad1)") (pintype "passive") (tstamp c9dc5aeb-1ace-4651-b463-aa02b1132476)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp f8e7950a-546f-4bf8-bc50-e5d1ff647e05)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" @@ -26099,7 +26471,7 @@ (pad "1" smd roundrect (at -1.1625 0) (size 1.425 2.2) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.175439) (net 2 "GND") (pinfunction "1") (pintype "passive") (tstamp a0d48361-30a1-4b43-a480-1b5c3f2f5e57)) (pad "2" smd roundrect (at 1.1625 0) (size 1.425 2.2) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.175439) - (net 180 "Net-(D10-Pad3)") (pinfunction "2") (pintype "passive") (tstamp 6223c9bf-5304-40f6-8298-72a6cfe55c34)) + (net 179 "Net-(D10-Pad3)") (pinfunction "2") (pintype "passive") (tstamp 6223c9bf-5304-40f6-8298-72a6cfe55c34)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -26375,9 +26747,9 @@ (fp_line (start -0.175 1.1) (end -0.675 0.6) (layer "B.Fab") (width 0.1) (tstamp c99fce72-5a8d-4da9-906b-69db93cfa018)) (fp_line (start 0.675 1.1) (end 0.675 -1.1) (layer "B.Fab") (width 0.1) (tstamp f6af4d02-eb36-4c38-b549-dfb103a9ec01)) (pad "1" smd rect (at -1.33 0.65 270) (size 0.45 1.5) (layers "B.Cu" "B.Paste" "B.Mask") - (net 173 "Net-(D5-Pad1)") (pintype "passive") (tstamp a2b9e8b4-be50-450a-ae7a-6df36ee7c6b0)) + (net 172 "Net-(D5-Pad1)") (pintype "passive") (tstamp a2b9e8b4-be50-450a-ae7a-6df36ee7c6b0)) (pad "2" smd rect (at -1.33 -0.65 270) (size 0.45 1.5) (layers "B.Cu" "B.Paste" "B.Mask") - (net 174 "Net-(D5-Pad2)") (pintype "passive") (tstamp 2d021b28-78ce-4d2a-9333-8377c916ba6b)) + (net 173 "Net-(D5-Pad2)") (pintype "passive") (tstamp 2d021b28-78ce-4d2a-9333-8377c916ba6b)) (pad "3" smd rect (at 1.33 0 270) (size 0.45 1.5) (layers "B.Cu" "B.Paste" "B.Mask") (net 50 "Net-(C45-Pad2)") (pintype "passive") (tstamp fccb92e2-8eea-404e-9756-5c231854a3cc)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-323_SC-70.wrl" @@ -26420,9 +26792,9 @@ (fp_line (start -0.8 0.4125) (end 0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp e954b458-99be-4f13-b9a5-21176df265cf)) (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp f0afa156-2ea2-4c71-b852-0920e8e430a3)) (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 370 "/Baseband/3V3_MIC") (pintype "passive") (tstamp 110d61e3-b6c9-407f-bfa3-aea22425f74b)) + (net 369 "/Baseband/3V3_MIC") (pintype "passive") (tstamp 110d61e3-b6c9-407f-bfa3-aea22425f74b)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 251 "/MUTE_MICn") (pintype "passive") (tstamp f1f27e95-442b-470d-9c53-1ad724fd6439)) + (net 250 "/MUTE_MICn") (pintype "passive") (tstamp f1f27e95-442b-470d-9c53-1ad724fd6439)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -26601,9 +26973,9 @@ (fp_line (start -0.325 1.45) (end 0.65 1.45) (layer "B.Fab") (width 0.1) (tstamp dc71ac4c-cda9-4132-8213-e317ae7d48a3)) (fp_line (start -0.65 1.125) (end -0.325 1.45) (layer "B.Fab") (width 0.1) (tstamp f7e605bc-c0c1-4358-92ef-4c655610b0ed)) (pad "1" smd roundrect (at -0.9375 0.95 180) (size 1.475 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 299 "Net-(Q6-Pad1)") (pinfunction "B") (pintype "input") (tstamp 0b89625c-f0cd-421c-b842-d193cde5c5b7)) + (net 298 "Net-(Q6-Pad1)") (pinfunction "B") (pintype "input") (tstamp 0b89625c-f0cd-421c-b842-d193cde5c5b7)) (pad "2" smd roundrect (at -0.9375 -0.95 180) (size 1.475 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 300 "Net-(Q6-Pad2)") (pinfunction "E") (pintype "passive") (tstamp 72475a51-42a8-4f09-a0de-c0652947a1be)) + (net 299 "Net-(Q6-Pad2)") (pinfunction "E") (pintype "passive") (tstamp 72475a51-42a8-4f09-a0de-c0652947a1be)) (pad "3" smd roundrect (at 0.9375 0 180) (size 1.475 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) (net 39 "/Baseband/VAGC") (pinfunction "C") (pintype "passive") (tstamp 46a0f9bc-d6ae-4241-b2de-8608f9aee72e)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" @@ -26615,7 +26987,7 @@ (footprint "Connector_Molex:Molex_PicoBlade_53261-0871_1x08-1MP_P1.25mm_Horizontal" (layer "B.Cu") (tedit 5B78AD89) (tstamp 4bbf4e0a-715d-4ef9-8c3e-b7676a17aa29) - (at 118 130.175 -90) + (at 270.177 130.162 -90) (descr "Molex PicoBlade series connector, 53261-0871 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator") (tags "connector Molex PicoBlade top entry") (property "MPN" "53261-0871") @@ -26670,19 +27042,19 @@ (pad "1" smd roundrect (at -4.375 2.4 270) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "Pin_1") (pintype "passive") (tstamp 2293be3d-fc12-4ca9-8292-814c20913384)) (pad "2" smd roundrect (at -3.125 2.4 270) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 224 "Net-(J4-PadTN)") (pinfunction "Pin_2") (pintype "passive") (tstamp a7be72b1-3046-4c13-b4b4-e43c3c3cc032)) + (net 223 "Net-(J4-PadTN)") (pinfunction "Pin_2") (pintype "passive") (tstamp a7be72b1-3046-4c13-b4b4-e43c3c3cc032)) (pad "3" smd roundrect (at -1.875 2.4 270) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 223 "Net-(J4-PadR)") (pinfunction "Pin_3") (pintype "passive") (tstamp cea8a45a-4808-417c-87dc-2940903a5102)) + (net 222 "Net-(J4-PadR)") (pinfunction "Pin_3") (pintype "passive") (tstamp cea8a45a-4808-417c-87dc-2940903a5102)) (pad "4" smd roundrect (at -0.625 2.4 270) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "Pin_4") (pintype "passive") (tstamp 9a444a0d-de5a-47ce-8584-db0b2731482b)) (pad "5" smd roundrect (at 0.625 2.4 270) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 228 "unconnected-(J6-Pad5)") (pinfunction "Pin_5") (pintype "passive") (tstamp c20d81d0-85ad-4d6a-80e7-d5cb8b5748c3)) + (net 227 "unconnected-(J6-Pad5)") (pinfunction "Pin_5") (pintype "passive") (tstamp c20d81d0-85ad-4d6a-80e7-d5cb8b5748c3)) (pad "6" smd roundrect (at 1.875 2.4 270) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 221 "Net-(J3-PadT)") (pinfunction "Pin_6") (pintype "passive") (tstamp c8fcdef1-2a77-4c45-844a-e8f9d75433a9)) + (net 220 "Net-(J3-PadT)") (pinfunction "Pin_6") (pintype "passive") (tstamp c8fcdef1-2a77-4c45-844a-e8f9d75433a9)) (pad "7" smd roundrect (at 3.125 2.4 270) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 218 "Net-(J3-PadR1)") (pinfunction "Pin_7") (pintype "passive") (tstamp d8083d75-1591-4266-93de-bc74222ed1e3)) + (net 217 "Net-(J3-PadR1)") (pinfunction "Pin_7") (pintype "passive") (tstamp d8083d75-1591-4266-93de-bc74222ed1e3)) (pad "8" smd roundrect (at 4.375 2.4 270) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 220 "Net-(J3-PadS)") (pinfunction "Pin_8") (pintype "passive") (tstamp fcfd4875-97ea-4357-bcfe-72aeea86bb7e)) + (net 219 "Net-(J3-PadS)") (pinfunction "Pin_8") (pintype "passive") (tstamp fcfd4875-97ea-4357-bcfe-72aeea86bb7e)) (pad "MP" smd roundrect (at -6.925 -0.5 270) (size 2.1 3) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.119048) (tstamp 0b3f83be-0574-415f-a451-f4d3d4a8797f)) (pad "MP" smd roundrect (at 6.925 -0.5 270) (size 2.1 3) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.119048) (tstamp 6fea8464-692b-4bde-81a2-5cebfe7e886c)) (model "${KICAD6_3DMODEL_DIR}/Connector_Molex.3dshapes/Molex_PicoBlade_53261-0871_1x08-1MP_P1.25mm_Horizontal.wrl" @@ -26727,7 +27099,7 @@ (fp_line (start -1.6 -1.25) (end -1.6 1.25) (layer "B.Fab") (width 0.1) (tstamp 342f239a-a8c3-484b-a7c8-41a9d504659f)) (fp_line (start 1.6 1.25) (end 1.6 -1.25) (layer "B.Fab") (width 0.1) (tstamp e818120d-f43d-43d0-8ce1-53426e320f18)) (pad "1" smd roundrect (at -1.5625 0) (size 1.325 2.7) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) - (net 371 "Net-(U5-Pad6)") (pintype "passive") (tstamp cc74fd1f-2fb0-4c47-a4d1-fbef72be2625)) + (net 370 "Net-(C38-Pad1)") (pintype "passive") (tstamp cc74fd1f-2fb0-4c47-a4d1-fbef72be2625)) (pad "2" smd roundrect (at 1.5625 0) (size 1.325 2.7) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) (net 2 "GND") (pintype "passive") (tstamp e07a847e-83a9-418f-99ac-5d70184b8089)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" @@ -26772,7 +27144,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) (net 27 "Net-(C22-Pad1)") (pintype "passive") (tstamp 17cb7edd-5118-4255-8b05-502c5830e30b)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 231 "/Baseband/SPKR_DET") (pintype "passive") (tstamp a2d29762-7817-4472-a78a-0d664602f4fb)) + (net 230 "/Baseband/SPKR_DET") (pintype "passive") (tstamp a2d29762-7817-4472-a78a-0d664602f4fb)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -26910,9 +27282,9 @@ (fp_line (start 0.8 0.4125) (end 0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp a6da8a9d-4bac-4f37-b7b4-abb528a73ea2)) (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp dedb249c-3cf4-4497-ba03-daed44317eaf)) (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 370 "/Baseband/3V3_MIC") (pintype "passive") (tstamp c9fa5ad0-5b34-4a81-aa53-2c6a0aa46980)) + (net 369 "/Baseband/3V3_MIC") (pintype "passive") (tstamp c9fa5ad0-5b34-4a81-aa53-2c6a0aa46980)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 320 "Net-(R22-Pad2)") (pintype "passive") (tstamp accf9450-59e1-441e-99d0-22f16dbac243)) + (net 319 "Net-(R22-Pad2)") (pintype "passive") (tstamp accf9450-59e1-441e-99d0-22f16dbac243)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -26955,7 +27327,7 @@ (fp_line (start 1.6 1.25) (end 1.6 -1.25) (layer "B.Fab") (width 0.1) (tstamp ef862f69-7866-47ca-bd9b-55cad09df632)) (fp_line (start -1.6 -1.25) (end -1.6 1.25) (layer "B.Fab") (width 0.1) (tstamp f491bae5-1dba-4daa-814a-6b7201493561)) (pad "1" smd roundrect (at -1.5625 0 270) (size 1.325 2.7) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) - (net 370 "/Baseband/3V3_MIC") (pintype "passive") (tstamp 5ec68308-b062-4169-968a-7b8cecfcf12f)) + (net 369 "/Baseband/3V3_MIC") (pintype "passive") (tstamp 5ec68308-b062-4169-968a-7b8cecfcf12f)) (pad "2" smd roundrect (at 1.5625 0 270) (size 1.325 2.7) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) (net 2 "GND") (pintype "passive") (tstamp 542ba545-a57d-4b6d-9abe-73581614b26b)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" @@ -27001,7 +27373,7 @@ (pad "1" smd roundrect (at -1.1625 0) (size 1.425 2.2) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.175439) (net 2 "GND") (pinfunction "1") (pintype "passive") (tstamp 466e9ea1-153c-429c-859b-b61eafbec2b3)) (pad "2" smd roundrect (at 1.1625 0) (size 1.425 2.2) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.175439) - (net 183 "Net-(D11-Pad3)") (pinfunction "2") (pintype "passive") (tstamp 7fff1b16-c00a-4a0a-94ef-83cfa62898b6)) + (net 182 "Net-(D11-Pad3)") (pinfunction "2") (pintype "passive") (tstamp 7fff1b16-c00a-4a0a-94ef-83cfa62898b6)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -27221,7 +27593,7 @@ (fp_line (start -0.8 -0.4125) (end -0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp c674685d-0afa-4047-b736-72883f8329b3)) (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp c7eb18ad-48f2-4cd2-b45c-907379625ddd)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 299 "Net-(Q6-Pad1)") (pintype "passive") (tstamp 833adf48-9087-4e39-8413-1d1a954a165f)) + (net 298 "Net-(Q6-Pad1)") (pintype "passive") (tstamp 833adf48-9087-4e39-8413-1d1a954a165f)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) (net 37 "Net-(C31-Pad1)") (pintype "passive") (tstamp 89676516-4e53-41bb-bbde-7dd2fce39f26)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -27264,9 +27636,9 @@ (fp_line (start 0.8 0.4125) (end 0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp a893ac74-3d4a-4741-acf9-70a70675c847)) (fp_line (start -0.8 0.4125) (end 0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp fbeaa863-c035-4848-93da-36ebfb8a77e8)) (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 231 "/Baseband/SPKR_DET") (pintype "passive") (tstamp a86d067f-ecdd-4704-a2c3-3b8e64f94e8f)) + (net 230 "/Baseband/SPKR_DET") (pintype "passive") (tstamp a86d067f-ecdd-4704-a2c3-3b8e64f94e8f)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 322 "Net-(R28-Pad2)") (pintype "passive") (tstamp bc2e4482-7d69-497f-ae19-e577ebd0b205)) + (net 321 "Net-(R28-Pad2)") (pintype "passive") (tstamp bc2e4482-7d69-497f-ae19-e577ebd0b205)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -27308,9 +27680,9 @@ (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp db1c393a-23c5-454f-8efe-2b85980f9e20)) (fp_line (start -0.8 -0.4125) (end -0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp dfd7788b-c11c-45a3-bfd0-42888eb84ba7)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 370 "/Baseband/3V3_MIC") (pintype "passive") (tstamp 7c88082c-c146-4eb5-9495-83ef11dd183a)) + (net 369 "/Baseband/3V3_MIC") (pintype "passive") (tstamp 7c88082c-c146-4eb5-9495-83ef11dd183a)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 321 "Net-(R23-Pad2)") (pintype "passive") (tstamp 3a323a2a-53f2-40db-a10e-c5c8dbbf4f9b)) + (net 320 "Net-(R23-Pad2)") (pintype "passive") (tstamp 3a323a2a-53f2-40db-a10e-c5c8dbbf4f9b)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -27357,9 +27729,9 @@ (pad "1" smd rect (at -3.15 2.3 180) (size 2 1.5) (layers "B.Cu" "B.Paste" "B.Mask") (net 2 "GND") (pinfunction "GND") (pintype "power_in") (tstamp 90eb6392-7973-41f1-9be2-2347da7f379b)) (pad "2" smd rect (at -3.15 0 180) (size 2 1.5) (layers "B.Cu" "B.Paste" "B.Mask") - (net 370 "/Baseband/3V3_MIC") (pinfunction "VO") (pintype "power_out") (tstamp 75a1101f-6cdb-40ef-b434-f5b4481a9b33)) + (net 369 "/Baseband/3V3_MIC") (pinfunction "VO") (pintype "power_out") (tstamp 75a1101f-6cdb-40ef-b434-f5b4481a9b33)) (pad "2" smd rect (at 3.15 0 180) (size 2 3.8) (layers "B.Cu" "B.Paste" "B.Mask") - (net 370 "/Baseband/3V3_MIC") (pinfunction "VO") (pintype "power_out") (tstamp e4700d4e-3e59-4dd3-ba23-b0f82c79dedf)) + (net 369 "/Baseband/3V3_MIC") (pinfunction "VO") (pintype "power_out") (tstamp e4700d4e-3e59-4dd3-ba23-b0f82c79dedf)) (pad "3" smd rect (at -3.15 -2.3 180) (size 2 1.5) (layers "B.Cu" "B.Paste" "B.Mask") (net 1 "+12V") (pinfunction "VI") (pintype "power_in") (tstamp 486b62ad-3a86-4af1-a545-7635da3e0fc9)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-223.wrl" @@ -27413,39 +27785,39 @@ ) ) - (gr_rect locked (start 151 20) (end 191 100) (layer "Dwgs.User") (width 0.15) (fill none) (tstamp 255c8bec-7bfd-4ade-8b7e-df903b469e6d)) - (gr_rect (start 100 110) (end 121 150) (layer "Dwgs.User") (width 0.15) (fill none) (tstamp 4df4b8e3-ebda-47a2-af16-72923d637471)) + (gr_rect locked (start 155.58 19.944) (end 195.58 99.944) (layer "Dwgs.User") (width 0.15) (fill none) (tstamp 255c8bec-7bfd-4ade-8b7e-df903b469e6d)) + (gr_rect (start 252.177 109.987) (end 273.177 149.987) (layer "Dwgs.User") (width 0.15) (fill none) (tstamp 4df4b8e3-ebda-47a2-af16-72923d637471)) (gr_line locked (start 283 60) (end 20 60) (layer "Dwgs.User") (width 0.15) (tstamp 55affc86-bd55-49af-87f6-967ce424691c)) (gr_rect locked (start 13 20) (end 143 100) (layer "Dwgs.User") (width 0.15) (fill none) (tstamp 76057f30-db6f-4243-9372-5dc99653e3b7)) (gr_poly locked (pts - (xy 243 86) - (xy 233 86) - (xy 233 45) - (xy 243 45) - (xy 243 20) - (xy 283 20) - (xy 283 100) - (xy 243 100) + (xy 122.941 177.516) + (xy 112.941 177.516) + (xy 112.941 136.516) + (xy 122.941 136.516) + (xy 122.941 111.516) + (xy 162.941 111.516) + (xy 162.941 191.516) + (xy 122.941 191.516) ) (layer "Dwgs.User") (width 0.15) (fill none) (tstamp 7d1bd36a-0b6a-4edf-8d3b-7dc281768c98)) - (gr_rect (start 20 135) (end 84 110) (layer "Dwgs.User") (width 0.15) (fill none) (tstamp ed41c664-7eea-4fdc-9a93-51a774aad832)) - (gr_rect locked (start 192 20) (end 232 100) (layer "Dwgs.User") (width 0.15) (fill none) (tstamp ee3903e9-e67f-4b21-826c-f24dbf4489d9)) + (gr_rect (start 175.776 134.874) (end 239.776 109.874) (layer "Dwgs.User") (width 0.15) (fill none) (tstamp ed41c664-7eea-4fdc-9a93-51a774aad832)) + (gr_rect (start 30.598 111.44) (end 70.598 191.44) (layer "Dwgs.User") (width 0.15) (fill none) (tstamp ee3903e9-e67f-4b21-826c-f24dbf4489d9)) (gr_text "Base Board" (at 17 19) (layer "Dwgs.User") (tstamp 25345a2d-f1a5-4fc9-8cb5-b73632d82c9b) (effects (font (size 1 1) (thickness 0.15))) ) - (gr_text "PA" (at 244 19) (layer "Dwgs.User") (tstamp 322083d8-3582-40c0-ad40-91c920f16c63) + (gr_text "PA" (at 123.941 110.516) (layer "Dwgs.User") (tstamp 322083d8-3582-40c0-ad40-91c920f16c63) (effects (font (size 1 1) (thickness 0.15))) ) - (gr_text "Frontend" (at 155 19) (layer "Dwgs.User") (tstamp 401167c1-2795-4a9c-bee5-f455836b572a) + (gr_text "Frontend" (at 159.58 18.944) (layer "Dwgs.User") (tstamp 401167c1-2795-4a9c-bee5-f455836b572a) (effects (font (size 1 1) (thickness 0.15))) ) - (gr_text "User Interface" (at 24 108) (layer "Dwgs.User") (tstamp 6eaf90e5-5228-49a8-94cb-dd61b51d7b37) + (gr_text "User Interface" (at 179.776 107.874) (layer "Dwgs.User") (tstamp 6eaf90e5-5228-49a8-94cb-dd61b51d7b37) (effects (font (size 1 1) (thickness 0.15))) ) - (gr_text "XTAL Filter" (at 196 19) (layer "Dwgs.User") (tstamp 9d23067e-a13f-47e0-8c60-bec120bf4871) + (gr_text "XTAL Filter" (at 34.598 110.44) (layer "Dwgs.User") (tstamp 9d23067e-a13f-47e0-8c60-bec120bf4871) (effects (font (size 1 1) (thickness 0.15))) ) - (gr_text "Front connectors" (at 106 109) (layer "Dwgs.User") (tstamp bd990534-9e86-4e6a-b96e-9a9bee327f2a) + (gr_text "Front connectors" (at 258.177 108.987) (layer "Dwgs.User") (tstamp bd990534-9e86-4e6a-b96e-9a9bee327f2a) (effects (font (size 1 1) (thickness 0.15))) ) |