diff options
Diffstat (limited to 'kicad-dart-70/kicad-dart-70.kicad_pcb')
| -rw-r--r-- | kicad-dart-70/kicad-dart-70.kicad_pcb | 5407 |
1 files changed, 2887 insertions, 2520 deletions
diff --git a/kicad-dart-70/kicad-dart-70.kicad_pcb b/kicad-dart-70/kicad-dart-70.kicad_pcb index 9288901..e79e0b8 100644 --- a/kicad-dart-70/kicad-dart-70.kicad_pcb +++ b/kicad-dart-70/kicad-dart-70.kicad_pcb @@ -106,7 +106,7 @@ (net 16 "Net-(C16-Pad1)") (net 17 "Net-(C16-Pad2)") (net 18 "Net-(C17-Pad1)") - (net 19 "Net-(C17-Pad2)") + (net 19 "/Antenna Switch/TX") (net 20 "Net-(C18-Pad1)") (net 21 "Net-(C18-Pad2)") (net 22 "Net-(C19-Pad1)") @@ -220,238 +220,241 @@ (net 130 "Net-(C129-Pad1)") (net 131 "/70MHz VHF Frontend/RX_TO_MIX") (net 132 "/70MHz VHF Frontend/VHF_TX") - (net 133 "Net-(C136-Pad1)") - (net 134 "Net-(C136-Pad2)") - (net 135 "/PA 70MHz/12V") - (net 136 "VGG1") - (net 137 "Net-(C140-Pad1)") - (net 138 "Net-(C140-Pad2)") - (net 139 "Net-(C143-Pad1)") - (net 140 "Net-(C143-Pad2)") - (net 141 "Net-(C144-Pad1)") - (net 142 "Net-(C144-Pad2)") - (net 143 "VGG2") - (net 144 "Net-(C147-Pad1)") - (net 145 "Net-(C147-Pad2)") - (net 146 "Net-(C148-Pad1)") - (net 147 "Net-(C148-Pad2)") - (net 148 "Net-(C149-Pad1)") - (net 149 "/Control on separate board/GPIO_PA4") - (net 150 "/PA 70MHz/VG_5V") - (net 151 "Net-(C155-Pad2)") - (net 152 "Net-(C156-Pad2)") - (net 153 "Net-(C159-Pad2)") - (net 154 "Net-(C161-Pad2)") - (net 155 "Net-(C162-Pad2)") - (net 156 "/PA 70MHz/PA_OUT") - (net 157 "/Control on separate board/ENC_B") - (net 158 "/Control on separate board/ENC_A") - (net 159 "/Control on separate board/3.3V_UI") - (net 160 "Net-(C169-Pad1)") - (net 161 "Net-(C171-Pad1)") - (net 162 "Net-(C172-Pad1)") - (net 163 "Net-(C173-Pad2)") - (net 164 "/Control on separate board/CW_TONE") - (net 165 "Net-(C176-Pad1)") - (net 166 "/Control on separate board/5V") - (net 167 "Net-(D2-Pad1)") - (net 168 "Net-(D5-Pad1)") - (net 169 "Net-(D5-Pad2)") - (net 170 "Net-(D6-Pad1)") - (net 171 "Net-(D6-Pad2)") - (net 172 "Net-(D7-Pad2)") - (net 173 "Net-(D8-Pad2)") - (net 174 "Net-(D9-Pad1)") - (net 175 "Net-(D10-Pad3)") - (net 176 "Net-(D10-Pad1)") - (net 177 "Net-(D11-Pad1)") - (net 178 "Net-(D11-Pad3)") - (net 179 "Net-(D13-Pad2)") - (net 180 "Net-(D14-Pad2)") - (net 181 "Net-(D15-Pad2)") - (net 182 "Net-(D16-Pad1)") - (net 183 "Net-(D16-Pad2)") - (net 184 "Net-(D16-Pad3)") - (net 185 "Net-(D17-Pad3)") - (net 186 "Net-(D18-Pad1)") - (net 187 "Net-(D18-Pad2)") - (net 188 "Net-(D18-Pad3)") - (net 189 "Net-(D19-Pad3)") - (net 190 "Net-(D20-Pad2)") - (net 191 "Net-(D21-Pad2)") - (net 192 "/Control on separate board/STATUSn") - (net 193 "Net-(D23-Pad2)") - (net 194 "unconnected-(DS1-Pad1)") - (net 195 "unconnected-(DS1-Pad2)") - (net 196 "unconnected-(DS1-Pad3)") - (net 197 "unconnected-(DS1-Pad4)") - (net 198 "unconnected-(DS1-Pad5)") - (net 199 "unconnected-(DS1-Pad6)") - (net 200 "unconnected-(DS1-Pad7)") - (net 201 "unconnected-(DS1-Pad8)") - (net 202 "unconnected-(DS1-Pad9)") - (net 203 "unconnected-(DS1-Pad10)") - (net 204 "unconnected-(DS1-Pad11)") - (net 205 "unconnected-(DS1-Pad12)") - (net 206 "unconnected-(DS1-Pad13)") - (net 207 "unconnected-(DS1-Pad14)") - (net 208 "unconnected-(DS1-Pad15)") - (net 209 "unconnected-(DS1-Pad16)") - (net 210 "Net-(FB1-Pad2)") - (net 211 "Net-(FB3-Pad1)") - (net 212 "unconnected-(J3-PadNC)") - (net 213 "Net-(J3-PadR1)") - (net 214 "unconnected-(J3-PadR2)") - (net 215 "Net-(J3-PadS)") - (net 216 "Net-(J3-PadT)") - (net 217 "unconnected-(J3-PadTN)") - (net 218 "Net-(J4-PadR)") - (net 219 "Net-(J4-PadTN)") - (net 220 "/CW_RING") - (net 221 "/CW_TIP") - (net 222 "unconnected-(J5-PadTN)") - (net 223 "unconnected-(J6-Pad5)") - (net 224 "Net-(J7-Pad1)") - (net 225 "unconnected-(J7-Pad4)") - (net 226 "/Baseband/SPKR_DET") - (net 227 "/Control on separate board/CW_TIP") - (net 228 "/Control on separate board/CW_RING") - (net 229 "/Control on separate board/CW_KEYn") - (net 230 "/Control on separate board/MIC_PTTn") - (net 231 "/Control on separate board/EN_TX") - (net 232 "/Control on separate board/EN_RX") - (net 233 "/Control on separate board/S_METER") - (net 234 "/Control on separate board/SCL") - (net 235 "/Control on separate board/SDA") - (net 236 "/Control on separate board/MUTE_MICn") - (net 237 "/Control on separate board/SPKR_VOL") - (net 238 "/Baseband/GPIO_XTAL") - (net 239 "/EN_VRX") - (net 240 "/EN_VTX") - (net 241 "/MIC_PTTn") - (net 242 "/Baseband/CW_KEYn") - (net 243 "/Baseband/CW_TONE") - (net 244 "Net-(Q30-Pad5)") - (net 245 "/Baseband/SPKR_VOL") - (net 246 "/MUTE_MICn") - (net 247 "/SDA") - (net 248 "/SCL") - (net 249 "/S_METER") - (net 250 "/Baseband/VHF_IN") - (net 251 "/Baseband/VHF_OUT") - (net 252 "/PA 70MHz/PA_IN") - (net 253 "/PA 70MHz/EN_PA") - (net 254 "/CLK1") - (net 255 "Net-(J22-Pad2)") - (net 256 "+VTX") - (net 257 "Net-(J24-Pad2)") - (net 258 "unconnected-(J24-Pad4)") - (net 259 "unconnected-(J24-Pad5)") - (net 260 "Net-(J24-Pad7)") - (net 261 "/Control on separate board/DISP_LAT") - (net 262 "/Control on separate board/I2C2_SDA") - (net 263 "/Control on separate board/I2C2_SCL") - (net 264 "/Control on separate board/PC14") - (net 265 "/Control on separate board/PC13") - (net 266 "Net-(C93-Pad1)") - (net 267 "/Control on separate board/PA0") - (net 268 "/Control on separate board/USART1_TX") - (net 269 "/Control on separate board/USART1_RX") - (net 270 "/Control on separate board/PB15") - (net 271 "unconnected-(J34-Pad1)") - (net 272 "/Control on separate board/USB_DM") - (net 273 "/Control on separate board/USB_DP") - (net 274 "Net-(J34-Pad4)") - (net 275 "/Control on separate board/SWCLK") - (net 276 "/Control on separate board/SWDIO") - (net 277 "/Control on separate board/RESETn") - (net 278 "/LO1") - (net 279 "Net-(L14-Pad1)") - (net 280 "Net-(L15-Pad1)") - (net 281 "Net-(L19-Pad1)") - (net 282 "Net-(L21-Pad2)") - (net 283 "Net-(L23-Pad2)") - (net 284 "Net-(L25-Pad2)") - (net 285 "Net-(L39-Pad2)") - (net 286 "Net-(L40-Pad2)") - (net 287 "Net-(Q1-Pad1)") - (net 288 "Net-(Q2-Pad4)") - (net 289 "Net-(Q3-Pad4)") - (net 290 "Net-(Q6-Pad1)") - (net 291 "Net-(Q6-Pad2)") - (net 292 "Net-(Q7-Pad1)") - (net 293 "Net-(Q10-Pad1)") - (net 294 "Net-(Q10-Pad2)") - (net 295 "Net-(Q11-Pad1)") - (net 296 "Net-(Q11-Pad3)") - (net 297 "Net-(Q13-Pad1)") - (net 298 "Net-(Q14-Pad2)") - (net 299 "Net-(Q14-Pad3)") - (net 300 "Net-(Q16-Pad2)") - (net 301 "Net-(Q18-Pad2)") - (net 302 "Net-(Q20-Pad1)") - (net 303 "Net-(Q21-Pad1)") - (net 304 "Net-(Q23-Pad1)") - (net 305 "Net-(Q24-Pad4)") - (net 306 "/70MHz VHF Frontend/+VRX_FE") - (net 307 "Net-(Q30-Pad4)") - (net 308 "Net-(R22-Pad2)") - (net 309 "Net-(R23-Pad2)") - (net 310 "Net-(R28-Pad2)") - (net 311 "Net-(R31-Pad1)") - (net 312 "Net-(R31-Pad2)") - (net 313 "Net-(R35-Pad1)") - (net 314 "Net-(R36-Pad1)") - (net 315 "Net-(R93-Pad1)") - (net 316 "Net-(R103-Pad2)") - (net 317 "Net-(R104-Pad2)") - (net 318 "Net-(R100-Pad1)") - (net 319 "Net-(R101-Pad1)") - (net 320 "Net-(R111-Pad2)") - (net 321 "Net-(R135-Pad1)") - (net 322 "Net-(R140-Pad1)") - (net 323 "Net-(J27-Pad1)") - (net 324 "Net-(R157-Pad1)") - (net 325 "Net-(R159-Pad1)") - (net 326 "Net-(R160-Pad1)") - (net 327 "Net-(R161-Pad2)") - (net 328 "/Control on separate board/BTN0") - (net 329 "/Control on separate board/BTN1") - (net 330 "/Control on separate board/BTN2") - (net 331 "/Control on separate board/BTN3") - (net 332 "Net-(R168-Pad1)") - (net 333 "/Control on separate board/ENC_BTN") - (net 334 "/Control on separate board/XTAL1") - (net 335 "/Control on separate board/XTAL2") - (net 336 "/Control on separate board/PWM_CW") - (net 337 "/Control on separate board/MUTE_SPKR") - (net 338 "Net-(R178-Pad2)") - (net 339 "Net-(R179-Pad2)") - (net 340 "Net-(R180-Pad2)") - (net 341 "/Control on separate board/BOOT0") - (net 342 "/Control on separate board/BOOT1") - (net 343 "unconnected-(T3-Pad2)") - (net 344 "unconnected-(T5-Pad2)") - (net 345 "unconnected-(TR1-Pad10)") - (net 346 "unconnected-(TR1-Pad15)") - (net 347 "unconnected-(TR2-Pad10)") - (net 348 "unconnected-(TR2-Pad15)") - (net 349 "Net-(U4-Pad3)") - (net 350 "/+3V3_CLK") - (net 351 "unconnected-(U11-Pad40)") - (net 352 "Net-(D22-Pad2)") - (net 353 "unconnected-(T4-Pad2)") - (net 354 "Net-(D1-Pad1)") - (net 355 "Net-(J16-Pad5)") - (net 356 "/Baseband/3V3_MIC") - (net 357 "Net-(C38-Pad1)") - (net 358 "Net-(L22-Pad2)") - (net 359 "Net-(L27-Pad2)") - (net 360 "Net-(L29-Pad2)") - (net 361 "Net-(L31-Pad2)") - (net 362 "unconnected-(J13-Pad1)") - (net 363 "unconnected-(J14-Pad1)") - (net 364 "unconnected-(U11-Pad1)") + (net 133 "Net-(C136-Pad2)") + (net 134 "VGG1") + (net 135 "Net-(C140-Pad1)") + (net 136 "Net-(C140-Pad2)") + (net 137 "Net-(C143-Pad1)") + (net 138 "Net-(C143-Pad2)") + (net 139 "Net-(C144-Pad1)") + (net 140 "Net-(C144-Pad2)") + (net 141 "VGG2") + (net 142 "Net-(C147-Pad1)") + (net 143 "Net-(C147-Pad2)") + (net 144 "Net-(C148-Pad1)") + (net 145 "Net-(C148-Pad2)") + (net 146 "/Control on separate board/GPIO_PA4") + (net 147 "/PA 70MHz/VG_5V") + (net 148 "Net-(C155-Pad2)") + (net 149 "Net-(C156-Pad2)") + (net 150 "Net-(C159-Pad2)") + (net 151 "/Control on separate board/ENC_B") + (net 152 "/Control on separate board/ENC_A") + (net 153 "/Control on separate board/3.3V_UI") + (net 154 "Net-(C169-Pad1)") + (net 155 "Net-(C171-Pad1)") + (net 156 "Net-(C172-Pad1)") + (net 157 "Net-(C173-Pad2)") + (net 158 "/Control on separate board/CW_TONE") + (net 159 "Net-(C176-Pad1)") + (net 160 "/Control on separate board/5V") + (net 161 "Net-(C116-Pad1)") + (net 162 "Net-(D5-Pad1)") + (net 163 "Net-(D5-Pad2)") + (net 164 "Net-(D6-Pad1)") + (net 165 "Net-(D6-Pad2)") + (net 166 "Net-(D7-Pad2)") + (net 167 "Net-(D8-Pad2)") + (net 168 "Net-(D9-Pad1)") + (net 169 "Net-(D10-Pad3)") + (net 170 "Net-(D10-Pad1)") + (net 171 "Net-(D11-Pad1)") + (net 172 "Net-(D11-Pad3)") + (net 173 "Net-(D13-Pad2)") + (net 174 "Net-(D14-Pad2)") + (net 175 "Net-(D15-Pad2)") + (net 176 "Net-(D16-Pad1)") + (net 177 "Net-(D16-Pad2)") + (net 178 "Net-(D16-Pad3)") + (net 179 "Net-(D17-Pad3)") + (net 180 "Net-(D18-Pad1)") + (net 181 "Net-(D18-Pad2)") + (net 182 "Net-(D18-Pad3)") + (net 183 "Net-(D19-Pad3)") + (net 184 "Net-(D20-Pad2)") + (net 185 "Net-(D21-Pad2)") + (net 186 "/Control on separate board/STATUSn") + (net 187 "Net-(D23-Pad2)") + (net 188 "unconnected-(DS1-Pad1)") + (net 189 "unconnected-(DS1-Pad2)") + (net 190 "unconnected-(DS1-Pad3)") + (net 191 "unconnected-(DS1-Pad4)") + (net 192 "unconnected-(DS1-Pad5)") + (net 193 "unconnected-(DS1-Pad6)") + (net 194 "unconnected-(DS1-Pad7)") + (net 195 "unconnected-(DS1-Pad8)") + (net 196 "unconnected-(DS1-Pad9)") + (net 197 "unconnected-(DS1-Pad10)") + (net 198 "unconnected-(DS1-Pad11)") + (net 199 "unconnected-(DS1-Pad12)") + (net 200 "unconnected-(DS1-Pad13)") + (net 201 "unconnected-(DS1-Pad14)") + (net 202 "unconnected-(DS1-Pad15)") + (net 203 "unconnected-(DS1-Pad16)") + (net 204 "Net-(FB1-Pad2)") + (net 205 "unconnected-(J3-PadNC)") + (net 206 "Net-(J3-PadR1)") + (net 207 "unconnected-(J3-PadR2)") + (net 208 "Net-(J3-PadS)") + (net 209 "Net-(J3-PadT)") + (net 210 "unconnected-(J3-PadTN)") + (net 211 "Net-(J4-PadR)") + (net 212 "Net-(J4-PadTN)") + (net 213 "/CW_RING") + (net 214 "/CW_TIP") + (net 215 "unconnected-(J5-PadTN)") + (net 216 "unconnected-(J6-Pad5)") + (net 217 "Net-(J7-Pad1)") + (net 218 "unconnected-(J7-Pad4)") + (net 219 "/Baseband/SPKR_DET") + (net 220 "/Control on separate board/CW_TIP") + (net 221 "/Control on separate board/CW_RING") + (net 222 "/Control on separate board/CW_KEYn") + (net 223 "/Control on separate board/MIC_PTTn") + (net 224 "/Control on separate board/EN_TX") + (net 225 "/Control on separate board/EN_RX") + (net 226 "/Control on separate board/S_METER") + (net 227 "/Control on separate board/SCL") + (net 228 "/Control on separate board/SDA") + (net 229 "/Control on separate board/MUTE_MICn") + (net 230 "/Control on separate board/SPKR_VOL") + (net 231 "/Baseband/GPIO_XTAL") + (net 232 "/EN_VRX") + (net 233 "/EN_VTX") + (net 234 "/MIC_PTTn") + (net 235 "/Baseband/CW_KEYn") + (net 236 "/Baseband/CW_TONE") + (net 237 "Net-(Q30-Pad5)") + (net 238 "/Baseband/SPKR_VOL") + (net 239 "/MUTE_MICn") + (net 240 "/SDA") + (net 241 "/SCL") + (net 242 "/S_METER") + (net 243 "/Baseband/VHF_IN") + (net 244 "/Baseband/VHF_OUT") + (net 245 "/CLK1") + (net 246 "Net-(J22-Pad2)") + (net 247 "+VTX") + (net 248 "Net-(J24-Pad2)") + (net 249 "unconnected-(J24-Pad4)") + (net 250 "unconnected-(J24-Pad5)") + (net 251 "Net-(J24-Pad7)") + (net 252 "/Control on separate board/DISP_LAT") + (net 253 "/Control on separate board/I2C2_SDA") + (net 254 "/Control on separate board/I2C2_SCL") + (net 255 "/Control on separate board/PC14") + (net 256 "/Control on separate board/PC13") + (net 257 "Net-(C93-Pad1)") + (net 258 "/Control on separate board/PA0") + (net 259 "/Control on separate board/USART1_TX") + (net 260 "/Control on separate board/USART1_RX") + (net 261 "/Control on separate board/PB15") + (net 262 "unconnected-(J34-Pad1)") + (net 263 "/Control on separate board/USB_DM") + (net 264 "/Control on separate board/USB_DP") + (net 265 "Net-(J34-Pad4)") + (net 266 "/Control on separate board/SWCLK") + (net 267 "/Control on separate board/SWDIO") + (net 268 "/Control on separate board/RESETn") + (net 269 "/LO1") + (net 270 "Net-(L14-Pad1)") + (net 271 "Net-(L15-Pad1)") + (net 272 "Net-(L19-Pad1)") + (net 273 "Net-(L21-Pad2)") + (net 274 "Net-(L23-Pad2)") + (net 275 "Net-(L25-Pad2)") + (net 276 "Net-(L39-Pad2)") + (net 277 "Net-(L40-Pad2)") + (net 278 "Net-(Q1-Pad1)") + (net 279 "Net-(Q2-Pad4)") + (net 280 "Net-(Q3-Pad4)") + (net 281 "Net-(Q6-Pad1)") + (net 282 "Net-(Q7-Pad1)") + (net 283 "Net-(Q10-Pad1)") + (net 284 "Net-(Q10-Pad2)") + (net 285 "Net-(Q11-Pad1)") + (net 286 "Net-(Q11-Pad3)") + (net 287 "Net-(Q13-Pad1)") + (net 288 "Net-(Q14-Pad2)") + (net 289 "Net-(Q14-Pad3)") + (net 290 "Net-(Q16-Pad2)") + (net 291 "Net-(Q18-Pad2)") + (net 292 "Net-(Q20-Pad1)") + (net 293 "Net-(Q21-Pad1)") + (net 294 "Net-(Q23-Pad1)") + (net 295 "Net-(Q24-Pad4)") + (net 296 "/70MHz VHF Frontend/+VRX_FE") + (net 297 "Net-(Q30-Pad4)") + (net 298 "Net-(R22-Pad2)") + (net 299 "Net-(R23-Pad2)") + (net 300 "Net-(R28-Pad2)") + (net 301 "Net-(R31-Pad1)") + (net 302 "Net-(R31-Pad2)") + (net 303 "Net-(R35-Pad1)") + (net 304 "Net-(R36-Pad1)") + (net 305 "Net-(R93-Pad1)") + (net 306 "Net-(R103-Pad2)") + (net 307 "Net-(R104-Pad2)") + (net 308 "Net-(R100-Pad1)") + (net 309 "Net-(R101-Pad1)") + (net 310 "Net-(R111-Pad2)") + (net 311 "Net-(R140-Pad1)") + (net 312 "Net-(J27-Pad1)") + (net 313 "Net-(R157-Pad1)") + (net 314 "Net-(R159-Pad1)") + (net 315 "Net-(R160-Pad1)") + (net 316 "Net-(R161-Pad2)") + (net 317 "/Control on separate board/BTN0") + (net 318 "/Control on separate board/BTN1") + (net 319 "/Control on separate board/BTN2") + (net 320 "/Control on separate board/BTN3") + (net 321 "Net-(R168-Pad1)") + (net 322 "/Control on separate board/ENC_BTN") + (net 323 "/Control on separate board/XTAL1") + (net 324 "/Control on separate board/XTAL2") + (net 325 "/Control on separate board/PWM_CW") + (net 326 "/Control on separate board/MUTE_SPKR") + (net 327 "Net-(R178-Pad2)") + (net 328 "Net-(R179-Pad2)") + (net 329 "Net-(R180-Pad2)") + (net 330 "/Control on separate board/BOOT0") + (net 331 "/Control on separate board/BOOT1") + (net 332 "unconnected-(T3-Pad2)") + (net 333 "unconnected-(T5-Pad2)") + (net 334 "unconnected-(TR1-Pad10)") + (net 335 "unconnected-(TR1-Pad15)") + (net 336 "unconnected-(TR2-Pad10)") + (net 337 "unconnected-(TR2-Pad15)") + (net 338 "Net-(U4-Pad3)") + (net 339 "/+3V3_CLK") + (net 340 "unconnected-(U11-Pad40)") + (net 341 "Net-(D22-Pad2)") + (net 342 "unconnected-(T4-Pad2)") + (net 343 "/Antenna Switch/RX") + (net 344 "/Baseband/3V3_MIC") + (net 345 "Net-(C38-Pad1)") + (net 346 "Net-(L22-Pad2)") + (net 347 "Net-(L27-Pad2)") + (net 348 "Net-(L29-Pad2)") + (net 349 "Net-(L31-Pad2)") + (net 350 "unconnected-(J13-Pad1)") + (net 351 "unconnected-(J14-Pad1)") + (net 352 "unconnected-(U11-Pad1)") + (net 353 "Net-(C119-Pad1)") + (net 354 "/Antenna Switch/ANT") + (net 355 "/Antenna Switch/V_{PIN}") + (net 356 "Net-(Q26-Pad5)") + (net 357 "Net-(Q26-Pad7)") + (net 358 "/TX_to_PA") + (net 359 "/Baseband/AGC_to_METER") + (net 360 "Net-(C138-Pad2)") + (net 361 "/PA 70MHz/V_{DD}") + (net 362 "Net-(C154-Pad1)") + (net 363 "Net-(J27-Pad2)") + (net 364 "Net-(R136-Pad1)") + (net 365 "Net-(T9-Pad4)") + (net 366 "Net-(J17-Pad1)") + (net 367 "Net-(D24-Pad3)") (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 00c884a2-70c6-4c6a-9e03-9c803075a76a) @@ -487,9 +490,9 @@ (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 735b9fbb-893d-481c-abae-53cb2cb415eb)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp f2f68403-7e1d-4cde-b959-3157f10ca7d0)) (pad "1" smd roundrect (at -0.8625 0 270) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 162 "Net-(C172-Pad1)") (pintype "passive") (tstamp 32623c44-60bf-406b-aaa1-d669b65aa396)) + (net 156 "Net-(C172-Pad1)") (pintype "passive") (tstamp 32623c44-60bf-406b-aaa1-d669b65aa396)) (pad "2" smd roundrect (at 0.8625 0 270) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/CW_TONE") (pintype "passive") (tstamp 91778f1e-ddd5-4e83-acd8-7a1eaba389ef)) + (net 158 "/Control on separate board/CW_TONE") (pintype "passive") (tstamp 91778f1e-ddd5-4e83-acd8-7a1eaba389ef)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -532,7 +535,7 @@ (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 74bf9df2-5859-4390-8e71-7949be6e3638)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 305 "Net-(Q24-Pad4)") (pintype "passive") (tstamp 94b9ca0d-75a2-4d3a-bb64-23740254a30c)) + (net 295 "Net-(Q24-Pad4)") (pintype "passive") (tstamp 94b9ca0d-75a2-4d3a-bb64-23740254a30c)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -592,7 +595,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 01ab605a-d99d-4866-a371-fa1d58ba32dc) - (at 160.595 210.291) + (at 132.08 141.986) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -623,9 +626,9 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 6f89f1a9-d4c2-4f30-8301-0ed3e72aa5c0)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp cab9dae3-5ada-441c-ace2-0aab0ca923cb)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 136 "VGG1") (pintype "passive") (tstamp c7cc5685-cf16-42b9-b1f2-e7d864987be2)) + (net 141 "VGG2") (pintype "passive") (tstamp c7cc5685-cf16-42b9-b1f2-e7d864987be2)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 191 "Net-(D21-Pad2)") (pintype "passive") (tstamp 2f74f4e0-8dd1-4ce0-8afa-ab6618c1b110)) + (net 185 "Net-(D21-Pad2)") (pintype "passive") (tstamp 2f74f4e0-8dd1-4ce0-8afa-ab6618c1b110)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -720,21 +723,21 @@ (pad "2" smd rect (at -2.2 -0.5) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 24 "Net-(C20-Pad1)") (pinfunction "VCAIN") (pintype "input") (tstamp c95ec06d-6b57-4404-9d34-0f7917ab6405)) (pad "3" smd rect (at -2.2 0) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") - (net 246 "/MUTE_MICn") (pinfunction "~{SD}") (pintype "input") (tstamp 0a89c5b2-1110-46d5-a2c3-e04f4d2e20a2)) + (net 239 "/MUTE_MICn") (pinfunction "~{SD}") (pintype "input") (tstamp 0a89c5b2-1110-46d5-a2c3-e04f4d2e20a2)) (pad "4" smd rect (at -2.2 0.5) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 25 "Net-(C20-Pad2)") (pinfunction "BUFOUT") (pintype "output") (tstamp 9d5d8685-8633-4950-b67c-ba5f6782c0d5)) (pad "5" smd rect (at -2.2 1) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 23 "Net-(C19-Pad2)") (pinfunction "IN+") (pintype "input") (tstamp 115937cf-7837-4a87-b00b-6abf4ea48c72)) (pad "6" smd rect (at 2.2 1) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") - (net 357 "Net-(C38-Pad1)") (pinfunction "AVG") (pintype "passive") (tstamp 616c679e-55b3-4b98-b697-c910d0c06056)) + (net 345 "Net-(C38-Pad1)") (pinfunction "AVG") (pintype "passive") (tstamp 616c679e-55b3-4b98-b697-c910d0c06056)) (pad "7" smd rect (at 2.2 0.5) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") - (net 308 "Net-(R22-Pad2)") (pinfunction "GATE") (pintype "passive") (tstamp 367603f8-7f70-41e2-ba3c-c32f0eded671)) + (net 298 "Net-(R22-Pad2)") (pinfunction "GATE") (pintype "passive") (tstamp 367603f8-7f70-41e2-ba3c-c32f0eded671)) (pad "8" smd rect (at 2.2 0) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") - (net 309 "Net-(R23-Pad2)") (pinfunction "COMP") (pintype "passive") (tstamp f0c802fd-4c2f-4369-9b97-cf5bc2cb43c2)) + (net 299 "Net-(R23-Pad2)") (pinfunction "COMP") (pintype "passive") (tstamp f0c802fd-4c2f-4369-9b97-cf5bc2cb43c2)) (pad "9" smd rect (at 2.2 -0.5) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 41 "Net-(C39-Pad2)") (pinfunction "VOUT") (pintype "output") (tstamp 04d53a4e-fa26-47dc-8e71-0132cc1f7cdb)) (pad "10" smd rect (at 2.2 -1) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") - (net 356 "/Baseband/3V3_MIC") (pinfunction "V+") (pintype "power_in") (tstamp d52b6010-4bc3-46f6-8364-4586fea583dd)) + (net 344 "/Baseband/3V3_MIC") (pinfunction "V+") (pintype "power_in") (tstamp d52b6010-4bc3-46f6-8364-4586fea583dd)) (model "${KICAD6_3DMODEL_DIR}/Package_SO.3dshapes/MSOP-10_3x3mm_P0.5mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -801,17 +804,17 @@ (pad "2" smd roundrect (at -3.125 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 8 "+5VA") (pinfunction "Pin_2") (pintype "passive") (tstamp cff7b72c-96b5-439e-a00b-a2cfa009cd60)) (pad "3" smd roundrect (at -1.875 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 239 "/EN_VRX") (pinfunction "Pin_3") (pintype "passive") (tstamp 44fe7928-072b-4776-9f27-4bf3063f64a3)) + (net 232 "/EN_VRX") (pinfunction "Pin_3") (pintype "passive") (tstamp 44fe7928-072b-4776-9f27-4bf3063f64a3)) (pad "4" smd roundrect (at -0.625 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 240 "/EN_VTX") (pinfunction "Pin_4") (pintype "passive") (tstamp 331a82c3-cd64-4677-9947-19547a37ea6d)) + (net 233 "/EN_VTX") (pinfunction "Pin_4") (pintype "passive") (tstamp 331a82c3-cd64-4677-9947-19547a37ea6d)) (pad "5" smd roundrect (at 0.625 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 241 "/MIC_PTTn") (pinfunction "Pin_5") (pintype "passive") (tstamp 9895cb7f-53f4-425d-a1c2-dac97d944c34)) + (net 234 "/MIC_PTTn") (pinfunction "Pin_5") (pintype "passive") (tstamp 9895cb7f-53f4-425d-a1c2-dac97d944c34)) (pad "6" smd roundrect (at 1.875 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 242 "/Baseband/CW_KEYn") (pinfunction "Pin_6") (pintype "passive") (tstamp b8808a71-c75d-44da-b16b-1559c3d02f10)) + (net 235 "/Baseband/CW_KEYn") (pinfunction "Pin_6") (pintype "passive") (tstamp b8808a71-c75d-44da-b16b-1559c3d02f10)) (pad "7" smd roundrect (at 3.125 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 221 "/CW_TIP") (pinfunction "Pin_7") (pintype "passive") (tstamp 64ab92b3-2e85-4930-aa0b-ef160f8da814)) + (net 214 "/CW_TIP") (pinfunction "Pin_7") (pintype "passive") (tstamp 64ab92b3-2e85-4930-aa0b-ef160f8da814)) (pad "8" smd roundrect (at 4.375 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 220 "/CW_RING") (pinfunction "Pin_8") (pintype "passive") (tstamp deca51b3-8b4b-4988-adb0-acab4e0e2fca)) + (net 213 "/CW_RING") (pinfunction "Pin_8") (pintype "passive") (tstamp deca51b3-8b4b-4988-adb0-acab4e0e2fca)) (pad "MP" smd roundrect (at -6.925 0.5 270) (size 2.1 3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.119048) (tstamp e0ce5aeb-8516-4d2b-80df-2a1d5bb6b06c)) (pad "MP" smd roundrect (at 6.925 0.5 270) (size 2.1 3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.119048) (tstamp ec536414-912a-4ba9-b5ea-9f3cb80be913)) (model "${KICAD6_3DMODEL_DIR}/Connector_Molex.3dshapes/Molex_PicoBlade_53261-0871_1x08-1MP_P1.25mm_Horizontal.wrl" @@ -823,17 +826,17 @@ (footprint "mpb:four_4mm_pads_narrow" (layer "F.Cu") (tedit 60603814) (tstamp 029b63b1-1e12-4250-ba81-8c806ffe0fd2) - (at 112.99 218.726) + (at 143.51 135.382 -90) (property "Need_order" "0") (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-0000605202bd") (attr through_hole) - (fp_text reference "T7" (at 0.3 -5 180) (layer "F.SilkS") + (fp_text reference "T7" (at 0.3 -5 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp e045aafb-1daa-405c-b0d9-657e3efd7678) ) - (fp_text value "9:1" (at 0 -0.1) (layer "F.Fab") + (fp_text value "9:1" (at 0 -0.1 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 851cc831-b603-4937-ae4d-e42769b43403) ) @@ -843,14 +846,14 @@ (fp_line (start -1.95 -5.85) (end 2 -5.85) (layer "F.SilkS") (width 0.15) (tstamp 9d3d1044-da41-491b-80a0-d9b931ee3f84)) (fp_line (start -5.95 -1.85) (end -1.95 -1.85) (layer "F.SilkS") (width 0.15) (tstamp 9f86de06-def9-4022-91c8-fc89501f344c)) (fp_line (start -5.95 -1.85) (end -5.95 1.65) (layer "F.SilkS") (width 0.15) (tstamp a0304b0e-f616-4d11-8dda-1f7600273878)) - (pad "1" smd rect locked (at -4.2 -4.1) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 133 "Net-(C136-Pad1)") (pinfunction "AA") (pintype "passive") (tstamp 2745102a-80c1-4fa4-b091-30f997abd690)) - (pad "2" smd rect locked (at -4.2 3.9) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 2 "GND") (pinfunction "AB") (pintype "passive") (tstamp 8c814388-326a-4f92-a626-3495bedc10a9)) - (pad "3" smd rect locked (at 4.2 -4.1) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 137 "Net-(C140-Pad1)") (pinfunction "SA") (pintype "passive") (tstamp 2a219451-e021-4b08-8bab-6a16f6bc12f4)) - (pad "4" smd rect locked (at 4.2 3.9) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 138 "Net-(C140-Pad2)") (pinfunction "SB") (pintype "passive") (tstamp ff14033e-bd43-4edf-bb2a-a8f15b0efa2a)) + (pad "1" smd rect locked (at -4.2 -4.1 270) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 2 "GND") (pinfunction "AA") (pintype "passive") (tstamp 2745102a-80c1-4fa4-b091-30f997abd690)) + (pad "2" smd rect locked (at -4.2 3.9 270) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 360 "Net-(C138-Pad2)") (pinfunction "AB") (pintype "passive") (tstamp 8c814388-326a-4f92-a626-3495bedc10a9)) + (pad "3" smd rect locked (at 4.2 -4.1 270) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 136 "Net-(C140-Pad2)") (pinfunction "SA") (pintype "passive") (tstamp 2a219451-e021-4b08-8bab-6a16f6bc12f4)) + (pad "4" smd rect locked (at 4.2 3.9 270) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 135 "Net-(C140-Pad1)") (pinfunction "SB") (pintype "passive") (tstamp ff14033e-bd43-4edf-bb2a-a8f15b0efa2a)) ) (footprint "Potentiometer_SMD:Potentiometer_Bourns_3214W_Vertical" (layer "F.Cu") @@ -896,9 +899,9 @@ (fp_line (start -2.4 1.75) (end 2.4 1.75) (layer "F.Fab") (width 0.1) (tstamp f6c7e822-f4e8-4d0c-9c75-8aa63a838437)) (fp_circle (center -1.2 0.65) (end -0.45 0.65) (layer "F.Fab") (width 0.1) (fill none) (tstamp 0276391d-b76b-43bf-85d1-e8f357f1e0d5)) (pad "1" smd rect (at 1.25 -1.45 270) (size 1.3 1.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 291 "Net-(Q6-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 2a339bba-3c38-4eb1-ba3e-f80608becb1b)) + (net 359 "/Baseband/AGC_to_METER") (pinfunction "1") (pintype "passive") (tstamp 2a339bba-3c38-4eb1-ba3e-f80608becb1b)) (pad "2" smd rect (at 0 1.45 270) (size 2 1.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 249 "/S_METER") (pinfunction "2") (pintype "passive") (tstamp a6b09f6f-11ca-4052-83c9-8cb2c4979c09)) + (net 242 "/S_METER") (pinfunction "2") (pintype "passive") (tstamp a6b09f6f-11ca-4052-83c9-8cb2c4979c09)) (pad "3" smd rect (at -1.25 -1.45 270) (size 1.3 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "3") (pintype "passive") (tstamp 8c133062-916b-465c-b2d0-a42a22902be6)) (model "${KICAD6_3DMODEL_DIR}/Potentiometer_SMD.3dshapes/Potentiometer_Bourns_3214W_Vertical.wrl" @@ -1007,7 +1010,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 045df471-1450-4e8a-85fb-ba205d04ac79) - (at 182.626 52.324 -90) + (at 183.896 58.42 -90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -1051,7 +1054,7 @@ (footprint "Package_TO_SOT_SMD:SOT-223-3_TabPin2" (layer "F.Cu") (tedit 5A02FF57) (tstamp 0501052a-3247-4ce2-ba10-308ad4421455) - (at -102.87 21.082) + (at -16.764 27.178) (descr "module CMS SOT223 4 pins") (tags "CMS SOT") (property "MPN" "LM1117IMP-ADJ") @@ -1133,9 +1136,9 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 549514ed-35ba-4148-8268-c82c56000a59)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 7ac667b9-50f2-437a-871f-dc27f2385f01)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 256 "+VTX") (pintype "passive") (tstamp 7d6d986e-5734-458f-b90b-f09aee6274ef)) + (net 247 "+VTX") (pintype "passive") (tstamp 7d6d986e-5734-458f-b90b-f09aee6274ef)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 177 "Net-(D11-Pad1)") (pintype "passive") (tstamp 678d7616-a519-4120-a67f-4094cbd472ae)) + (net 171 "Net-(D11-Pad1)") (pintype "passive") (tstamp 678d7616-a519-4120-a67f-4094cbd472ae)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -1189,7 +1192,7 @@ (footprint "Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 0638de7b-43b8-42b8-8675-21acbe29ddc0) - (at -104.648 15.748) + (at -18.542 21.844) (descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "TAJA106K016RNJ") @@ -1277,7 +1280,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 07319bbc-9574-4653-9958-6cd88528b92f) - (at 139.615 223.301) + (at 143.637 138.43) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GQM2195C2E220JB2D") @@ -1309,9 +1312,9 @@ (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp b431fd2c-d50d-4732-9ca9-0d33bb153a51)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp fbb5e686-3636-4908-9b24-d61af3833fb6)) (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 137 "Net-(C140-Pad1)") (pintype "passive") (tstamp 9fff174d-2639-4958-badb-1522ba2e783b)) + (net 135 "Net-(C140-Pad1)") (pintype "passive") (tstamp 9fff174d-2639-4958-badb-1522ba2e783b)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 138 "Net-(C140-Pad2)") (pintype "passive") (tstamp 4a3ab61b-1dd2-46fd-b8ab-1ce7071b53f1)) + (net 136 "Net-(C140-Pad2)") (pintype "passive") (tstamp 4a3ab61b-1dd2-46fd-b8ab-1ce7071b53f1)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -1321,7 +1324,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 076524af-a0d0-47d0-9ae3-4ddb353736f3) - (at 163.755 200.381) + (at 143.6155 140.716) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GQM2195C2E220JB2D") @@ -1353,9 +1356,9 @@ (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 5e3342fc-8078-4029-901d-2433b6a077fc)) (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 8c9c22d4-d508-43c7-aa1b-2c85c85d8e91)) (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 137 "Net-(C140-Pad1)") (pintype "passive") (tstamp c87e1e19-9c97-46cc-bd70-71085ba7229c)) + (net 135 "Net-(C140-Pad1)") (pintype "passive") (tstamp c87e1e19-9c97-46cc-bd70-71085ba7229c)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 138 "Net-(C140-Pad2)") (pintype "passive") (tstamp 9af895b9-f261-4176-ad13-c71f990d9143)) + (net 136 "Net-(C140-Pad2)") (pintype "passive") (tstamp 9af895b9-f261-4176-ad13-c71f990d9143)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -1405,9 +1408,9 @@ (fp_line (start 1.4 -0.9) (end 1.4 0.9) (layer "F.Fab") (width 0.1) (tstamp cb04241a-824e-4fc3-af1d-ca16a4a47694)) (fp_line (start 0.25 0) (end 0.75 0) (layer "F.Fab") (width 0.1) (tstamp dc02565d-725b-4197-9c23-0c14d702227d)) (pad "1" smd rect (at -1.4 0 90) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") - (net 180 "Net-(D14-Pad2)") (pinfunction "K") (pintype "passive") (tstamp ea3201bf-f6ff-441b-8764-2c8ff7d85201)) + (net 174 "Net-(D14-Pad2)") (pinfunction "K") (pintype "passive") (tstamp ea3201bf-f6ff-441b-8764-2c8ff7d85201)) (pad "2" smd rect (at 1.4 0 90) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") - (net 181 "Net-(D15-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 432312bf-7333-43cf-bdb2-dfb387ac86ce)) + (net 175 "Net-(D15-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 432312bf-7333-43cf-bdb2-dfb387ac86ce)) (model "${KICAD6_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-123F.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -1450,7 +1453,7 @@ (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 61d87c1c-24a3-43f2-ad2e-7f1d76be350f)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 311 "Net-(R31-Pad1)") (pintype "passive") (tstamp 67225a8f-33b5-4e41-9991-2b9148e1a574)) + (net 301 "Net-(R31-Pad1)") (pintype "passive") (tstamp 67225a8f-33b5-4e41-9991-2b9148e1a574)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -1460,7 +1463,7 @@ (footprint "mpb:PLD-1.5W" (layer "F.Cu") (tedit 5FBA9FA6) (tstamp 09899c88-1cda-4bcb-afb3-a3c7c8016219) - (at 136.45 200.706) + (at 136.906 153.67) (property "Need_order" "0") (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") @@ -1488,9 +1491,9 @@ (fp_line (start -3.75 -2.5) (end -2.75 -2.5) (layer "F.SilkS") (width 0.15) (tstamp eb6a8a9a-0f0a-4b8c-8b36-5625f51b113a)) (fp_line (start 3.75 -3) (end 2.75 -3) (layer "F.SilkS") (width 0.15) (tstamp f9b094dd-238b-4ef6-a6a5-5bc92889851c)) (pad "1" smd rect locked (at 0 -3.5) (size 5 3.16) (layers "F.Cu" "F.Paste" "F.Mask") - (net 286 "Net-(L40-Pad2)") (pinfunction "G") (pintype "input") (tstamp 6134ca1a-5bf5-4bb6-b7a6-6f50a0d0c241)) + (net 277 "Net-(L40-Pad2)") (pinfunction "G") (pintype "input") (tstamp 6134ca1a-5bf5-4bb6-b7a6-6f50a0d0c241)) (pad "2" smd rect locked (at 0 3.5) (size 5 3.16) (layers "F.Cu" "F.Paste" "F.Mask") - (net 147 "Net-(C148-Pad2)") (pinfunction "D") (pintype "passive") (tstamp a3db193d-7d39-46ee-a2d9-8eb51d556f0c)) + (net 145 "Net-(C148-Pad2)") (pinfunction "D") (pintype "passive") (tstamp a3db193d-7d39-46ee-a2d9-8eb51d556f0c)) (pad "3" thru_hole circle locked (at 0 -0.6) (size 0.6 0.6) (drill 0.5) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "S") (pintype "passive") (tstamp 0d6d4006-d288-47b6-8f58-6d799f0b688f)) (pad "3" thru_hole circle locked (at -3 -0.6) (size 0.6 0.6) (drill 0.5) (layers *.Cu *.Mask) @@ -1525,7 +1528,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 0a1593aa-fd33-4e31-82c3-cc9183ca5eb8) - (at 132.465 230.991) + (at 118.618 153.924 -90) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "885612007040/VJ0805A102GXXPW1BC") @@ -1534,15 +1537,15 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-00005fbf9029") (attr smd) - (fp_text reference "C136" (at 0 -1.68) (layer "F.SilkS") + (fp_text reference "C136" (at 0 -1.68 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 9cb601cf-8561-4019-922a-be632b68b072) ) - (fp_text value "1nF" (at 0 1.68) (layer "F.Fab") + (fp_text value "1nF" (at 0 1.68 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp c5454501-912e-44a3-9984-d5bb6cbfaada) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.08))) (tstamp f2ded8d9-669b-4189-a31c-ece171edb1d0) ) @@ -1556,10 +1559,10 @@ (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp 81707b00-0773-497c-8e28-6d25bb754af9)) (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp a644dd98-5e9c-4854-b69e-e6eda7e7bac1)) (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp da8e1edb-0e5e-48d7-aab2-36a766f7108c)) - (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 133 "Net-(C136-Pad1)") (pintype "passive") (tstamp ea399962-671d-4852-9bdb-6da750725300)) - (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 134 "Net-(C136-Pad2)") (pintype "passive") (tstamp 67ff1c44-7613-4c5e-8650-a70f5d6a885f)) + (pad "1" smd roundrect (at -1.0375 0 270) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 360 "Net-(C138-Pad2)") (pintype "passive") (tstamp ea399962-671d-4852-9bdb-6da750725300)) + (pad "2" smd roundrect (at 1.0375 0 270) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 133 "Net-(C136-Pad2)") (pintype "passive") (tstamp 67ff1c44-7613-4c5e-8650-a70f5d6a885f)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -1612,7 +1615,7 @@ (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 0b391c09-2d76-4b27-9a34-b08210ccf47e) - (at 156.215 210.511) + (at 126.492 159.258 90) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor") (property "Need_order" "0") @@ -1620,15 +1623,15 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-00006054cd8c") (attr smd) - (fp_text reference "R152" (at 0 -1.65) (layer "F.SilkS") + (fp_text reference "R152" (at 0 -1.65 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 94a5a2ab-e7a5-4c81-93be-bc66b9d786a9) ) - (fp_text value "1.5k/2W" (at 0 1.65) (layer "F.Fab") + (fp_text value "1.5k/2W" (at 0 1.65 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp f91d7fc3-1255-44b5-bef0-6460333b57f9) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.08))) (tstamp b7c853b3-7d2b-4d7b-9222-6db3cf2e5915) ) @@ -1642,10 +1645,10 @@ (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 2a12d647-53c9-41d8-98f9-353491d47986)) (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp 95aaa18b-6796-4376-9b01-2ed6f3de7229)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp f9bc191d-58f8-4468-a76d-5e5330906320)) - (pad "1" smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902) - (net 146 "Net-(C148-Pad1)") (pintype "passive") (tstamp 56957936-e63f-4309-983a-19348d5a3223)) - (pad "2" smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902) - (net 286 "Net-(L40-Pad2)") (pintype "passive") (tstamp a37ab1a9-f969-48c2-83bf-e8bcaf2b4c26)) + (pad "1" smd roundrect (at -0.9125 0 90) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902) + (net 144 "Net-(C148-Pad1)") (pintype "passive") (tstamp 56957936-e63f-4309-983a-19348d5a3223)) + (pad "2" smd roundrect (at 0.9125 0 90) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902) + (net 277 "Net-(L40-Pad2)") (pintype "passive") (tstamp a37ab1a9-f969-48c2-83bf-e8bcaf2b4c26)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -1714,52 +1717,9 @@ ) ) - (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") - (tedit 5F68FEEE) (tstamp 0c1aa8d3-ebf7-47a3-a608-884732a0be62) - (at 165.775 203.141) - (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") - (tags "resistor handsolder") - (property "Need_order" "0") - (property "Sheetfile" "pa_70.kicad_sch") - (property "Sheetname" "PA 70MHz") - (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/2d2ea35e-1881-44fd-a6fd-f7cc9da6f251") - (attr smd) - (fp_text reference "R153" (at 0 -1.43) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 648bca5b-4ffa-40e5-9922-74d777bcf450) - ) - (fp_text value "10k" (at 0 1.43) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 96fe4aef-862e-4e71-8280-730c83fbb138) - ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 0.4 0.4) (thickness 0.06))) - (tstamp bb24d0ee-f788-4671-a079-242e8261ce09) - ) - (fp_line (start -0.254724 0.5225) (end 0.254724 0.5225) (layer "F.SilkS") (width 0.12) (tstamp 93c867db-0e34-4052-8348-e7ff96a16ac5)) - (fp_line (start -0.254724 -0.5225) (end 0.254724 -0.5225) (layer "F.SilkS") (width 0.12) (tstamp d47bc00f-5dd5-440f-ad8b-c707368914c8)) - (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer "F.CrtYd") (width 0.05) (tstamp 23cf8030-c86f-49dc-968d-b7bae6e5b385)) - (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer "F.CrtYd") (width 0.05) (tstamp a2a8c9ee-5ffd-41f7-85e7-a92cb1dc457f)) - (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp a4dca203-eaa0-4a15-ab04-3b452d4bea36)) - (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp be3ff309-e421-4d5a-9874-3ccf8f33f63a)) - (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 04e2c795-ce7c-451a-abb1-012724a9d5e1)) - (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 91e3d122-2798-4ee2-8180-5359244fd3ca)) - (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 943b4a1e-e0e3-44c2-9acd-023cc1364d64)) - (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp d90f76d0-e27a-468d-aa85-b141cc816036)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 2 "GND") (pintype "passive") (tstamp cb592244-cd4b-484f-bb45-5e9b9aac2b8f)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 253 "/PA 70MHz/EN_PA") (pintype "passive") (tstamp 6ff4dd04-faff-407c-8122-7cfce48faae3)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 0cecbbb3-27a5-4bef-a1b4-ad20be161516) - (at 221.869 30.861 90) + (at 220.472 30.734 90) (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2UASR56") @@ -1791,7 +1751,7 @@ (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 796c014c-7868-4757-9649-700362447949)) (fp_line (start 1.25 -1) (end 1.25 1) (layer "F.Fab") (width 0.1) (tstamp cffbb729-9946-4d97-a2fe-733a08cefb25)) (pad "1" smd roundrect (at -1.1625 0 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 358 "Net-(L22-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 9e73771e-2c0f-4273-916e-4a77f17add23)) + (net 346 "Net-(L22-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 9e73771e-2c0f-4273-916e-4a77f17add23)) (pad "2" smd roundrect (at 1.1625 0 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 475986b3-3820-4d54-ae49-e195a674b419)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" @@ -1858,19 +1818,19 @@ (pad "1" smd roundrect (at -4.375 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "Pin_1") (pintype "passive") (tstamp 96f38750-cca2-4a1d-84a0-92b26c75d491)) (pad "2" smd roundrect (at -3.125 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 243 "/Baseband/CW_TONE") (pinfunction "Pin_2") (pintype "passive") (tstamp 084de9d4-7d90-4ccc-8dde-39872a0176cd)) + (net 236 "/Baseband/CW_TONE") (pinfunction "Pin_2") (pintype "passive") (tstamp 084de9d4-7d90-4ccc-8dde-39872a0176cd)) (pad "3" smd roundrect (at -1.875 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 238 "/Baseband/GPIO_XTAL") (pinfunction "Pin_3") (pintype "passive") (tstamp d93c8282-49d5-4560-ac60-320868cf053a)) + (net 231 "/Baseband/GPIO_XTAL") (pinfunction "Pin_3") (pintype "passive") (tstamp d93c8282-49d5-4560-ac60-320868cf053a)) (pad "4" smd roundrect (at -0.625 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 245 "/Baseband/SPKR_VOL") (pinfunction "Pin_4") (pintype "passive") (tstamp 7c53349f-b076-49d3-9946-cb16a3ba3ec9)) + (net 238 "/Baseband/SPKR_VOL") (pinfunction "Pin_4") (pintype "passive") (tstamp 7c53349f-b076-49d3-9946-cb16a3ba3ec9)) (pad "5" smd roundrect (at 0.625 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 246 "/MUTE_MICn") (pinfunction "Pin_5") (pintype "passive") (tstamp 945782fc-0656-41f8-b763-a83a74f225f9)) + (net 239 "/MUTE_MICn") (pinfunction "Pin_5") (pintype "passive") (tstamp 945782fc-0656-41f8-b763-a83a74f225f9)) (pad "6" smd roundrect (at 1.875 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 247 "/SDA") (pinfunction "Pin_6") (pintype "passive") (tstamp 96358376-ca1b-403b-b4e0-ac6b2f6f52a8)) + (net 240 "/SDA") (pinfunction "Pin_6") (pintype "passive") (tstamp 96358376-ca1b-403b-b4e0-ac6b2f6f52a8)) (pad "7" smd roundrect (at 3.125 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 248 "/SCL") (pinfunction "Pin_7") (pintype "passive") (tstamp 89a0e741-3c80-47a8-91be-040387185869)) + (net 241 "/SCL") (pinfunction "Pin_7") (pintype "passive") (tstamp 89a0e741-3c80-47a8-91be-040387185869)) (pad "8" smd roundrect (at 4.375 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 249 "/S_METER") (pinfunction "Pin_8") (pintype "passive") (tstamp f05f079d-9f9d-4f66-850f-b40811fb37a6)) + (net 242 "/S_METER") (pinfunction "Pin_8") (pintype "passive") (tstamp f05f079d-9f9d-4f66-850f-b40811fb37a6)) (pad "MP" smd roundrect (at -6.925 0.5 270) (size 2.1 3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.119048) (tstamp 58edf5bf-56df-4f88-aa96-cf1310ae9f05)) (pad "MP" smd roundrect (at 6.925 0.5 270) (size 2.1 3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.119048) (tstamp 6000d844-aaa7-4f17-9a16-0355e4ac21c7)) (model "${KICAD6_3DMODEL_DIR}/Connector_Molex.3dshapes/Molex_PicoBlade_53261-0871_1x08-1MP_P1.25mm_Horizontal.wrl" @@ -1917,9 +1877,9 @@ (fp_line (start -0.325 -1.45) (end 0.65 -1.45) (layer "F.Fab") (width 0.1) (tstamp a30e0fbb-dc81-43ad-8ade-bb3a6e7267c3)) (fp_line (start 0.65 1.45) (end -0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp b2fec40f-4461-40bc-915c-b609e0442d46)) (pad "1" smd roundrect (at -0.9375 -0.95 180) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 172 "Net-(D7-Pad2)") (pinfunction "B") (pintype "input") (tstamp afae5d78-510a-4e9e-bb26-a6215c7a0b4b)) + (net 166 "Net-(D7-Pad2)") (pinfunction "B") (pintype "input") (tstamp afae5d78-510a-4e9e-bb26-a6215c7a0b4b)) (pad "2" smd roundrect (at -0.9375 0.95 180) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 291 "Net-(Q6-Pad2)") (pinfunction "E") (pintype "passive") (tstamp b64ccb6a-dcf8-438d-a357-54d787ca3bb4)) + (net 359 "/Baseband/AGC_to_METER") (pinfunction "E") (pintype "passive") (tstamp b64ccb6a-dcf8-438d-a357-54d787ca3bb4)) (pad "3" smd roundrect (at 0.9375 0 180) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 38 "/Baseband/VAGC") (pinfunction "C") (pintype "passive") (tstamp a9f57d9e-8086-4676-85d4-7762bf2502a2)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" @@ -1959,7 +1919,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 0d9241dd-423b-4e79-b006-6fca155256c7) - (at -97.028 22.352 90) + (at -10.922 28.448 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -1992,7 +1952,7 @@ (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp e5a24dbb-bcb5-449b-adbb-cf8261c7cf88)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 240 "/EN_VTX") (pintype "passive") (tstamp 76f257a9-47fa-4365-a9b4-731bb3d2fa38)) + (net 233 "/EN_VTX") (pintype "passive") (tstamp 76f257a9-47fa-4365-a9b4-731bb3d2fa38)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2035,7 +1995,7 @@ (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 63 "Net-(C54-Pad2)") (pintype "passive") (tstamp cd1c5144-3d34-42a2-847d-e048477cbd6a)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 293 "Net-(Q10-Pad1)") (pintype "passive") (tstamp f7377436-390b-4bdf-90d0-1e49af4ac83e)) + (net 283 "Net-(Q10-Pad1)") (pintype "passive") (tstamp f7377436-390b-4bdf-90d0-1e49af4ac83e)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2045,7 +2005,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 0e1cb933-efa3-4441-8caf-8cd7a675a751) - (at 166.37 81.788 180) + (at 168.402 81.026 180) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "Need_order" "0") @@ -2088,7 +2048,7 @@ (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 0e2e44c7-2a63-4e79-a059-80ccb095d5dd) - (at 109.0735 29.718) + (at 111.8675 28.956) (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2UAS1R0x0CL") @@ -2122,51 +2082,7 @@ (pad "1" smd roundrect (at -1.1625 0) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 96 "Net-(C82-Pad1)") (pinfunction "1") (pintype "passive") (tstamp a4f7e848-d978-484b-b502-24a75623a926)) (pad "2" smd roundrect (at 1.1625 0) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 280 "Net-(L15-Pad1)") (pinfunction "2") (pintype "passive") (tstamp f9cf66ea-8916-492e-a68f-ef2b2a72fcc3)) - (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") - (tedit 5F68FEF0) (tstamp 0e582e88-8ae7-4c0f-9b58-3c48bf4c34c8) - (at -75.184 86.614 180) - (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") - (tags "inductor handsolder") - (property "MPN" "LQW2UAS1R0x0CL") - (property "Need_order" "0") - (property "Sheetfile" "kicad-dart-70.kicad_sch") - (property "Sheetname" "") - (path "/a3fa9380-342f-4570-bb72-fa7280ee36ca") - (attr smd) - (fp_text reference "L1" (at 0 -2.05) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp f07d6f71-190a-4eb6-bebb-63e77b720be9) - ) - (fp_text value "1uH" (at 0 2.05) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 9410073c-c294-44fd-a2a8-ba93b956846a) - ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 0.62 0.62) (thickness 0.09))) - (tstamp 356edf17-8daf-4687-bfff-fad8355af77b) - ) - (fp_line (start -0.261252 -1.11) (end 0.261252 -1.11) (layer "F.SilkS") (width 0.12) (tstamp 4a2b8dca-527c-4c86-bdb4-665285c82408)) - (fp_line (start -0.261252 1.11) (end 0.261252 1.11) (layer "F.SilkS") (width 0.12) (tstamp eff4b0d3-0b97-4fbb-b90f-ea0267c006fc)) - (fp_line (start 2.12 1.35) (end -2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp 03468391-6589-4282-b6d2-52a1ba1b9bbd)) - (fp_line (start -2.12 -1.35) (end 2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 0d52c743-6d63-4667-8798-376f9df64286)) - (fp_line (start 2.12 -1.35) (end 2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp 3ac09277-eeea-466e-ba09-088f06087d4e)) - (fp_line (start -2.12 1.35) (end -2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 6a6dc1ea-d22c-4b4d-8234-90faadddbbf6)) - (fp_line (start 1.25 1) (end -1.25 1) (layer "F.Fab") (width 0.1) (tstamp 1e20c822-2d8c-41c5-9c5c-50e5e3804900)) - (fp_line (start 1.25 -1) (end 1.25 1) (layer "F.Fab") (width 0.1) (tstamp 78b787a5-bf38-4f0f-870e-5d5e747c78cd)) - (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 84c1d7b3-8075-4e77-8e3c-b8ed8b34d897)) - (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 9764ed37-3c32-4a1d-90cd-f0f2d9d37280)) - (pad "1" smd roundrect (at -1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 2 "GND") (pinfunction "1") (pintype "passive") (tstamp 24207148-ea57-4718-ab65-8c3b6f8f8457)) - (pad "2" smd roundrect (at 1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 19 "Net-(C17-Pad2)") (pinfunction "2") (pintype "passive") (tstamp f95e1fdb-c361-40d9-bece-b9d1c82d3567)) + (net 271 "Net-(L15-Pad1)") (pinfunction "2") (pintype "passive") (tstamp f9cf66ea-8916-492e-a68f-ef2b2a72fcc3)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2214,7 +2130,7 @@ (net 80 "Net-(C69-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 459d5b3b-3555-4bf6-b72d-60f002cd3f0d)) (pad "2" smd rect (at -1.5 0.95 180) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp eacddb67-f8cf-4b4b-be61-aa476d1c12e3)) (pad "3" smd rect (at 1.5 0 180) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 178 "Net-(D11-Pad3)") (pinfunction "K") (pintype "passive") (tstamp 29d6e036-02ea-444b-8c7e-4be89f02661f)) + (net 172 "Net-(D11-Pad3)") (pinfunction "K") (pintype "passive") (tstamp 29d6e036-02ea-444b-8c7e-4be89f02661f)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2224,7 +2140,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 0f50ba34-315b-4881-85a4-f88c84ff27c6) - (at 105.855 237.631) + (at 117.856 56.134 -90) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A560JXAMC") @@ -2233,15 +2149,15 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/ea6514b2-121a-4ca1-889f-cd53365d420c") (attr smd) - (fp_text reference "C155" (at 0 -1.68) (layer "F.SilkS") + (fp_text reference "C155" (at 0 -1.68 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 917e34bb-2617-4c90-af0d-005fa1247eb4) ) - (fp_text value "56pF" (at 0 1.68) (layer "F.Fab") + (fp_text value "56pF" (at 0 1.68 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 66fdbc6b-391b-4334-8c92-731fa9577b12) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.08))) (tstamp 63783907-03e4-47bb-9328-7b99377803f6) ) @@ -2255,10 +2171,10 @@ (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 1abd69fa-370c-48a5-bdeb-fcc3da1e143e)) (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 60118154-3134-47a5-add8-c407f8d35868)) (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp f71de1d8-afdf-412d-82f5-a5e8203ca074)) - (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (pad "1" smd roundrect (at -1.0375 0 270) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp d428d263-e2ac-413f-9816-a59828ed4c3d)) - (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 151 "Net-(C155-Pad2)") (pintype "passive") (tstamp e49c742a-e568-4c7d-a7af-d06f2c20d345)) + (pad "2" smd roundrect (at 1.0375 0 270) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 148 "Net-(C155-Pad2)") (pintype "passive") (tstamp e49c742a-e568-4c7d-a7af-d06f2c20d345)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2344,7 +2260,7 @@ (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 10c89dc9-d928-4c0c-a257-4f8609064447) - (at 221.869 55.245 90) + (at 220.472 55.118 90) (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2UASR56") @@ -2376,7 +2292,7 @@ (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 832fa49f-9e7e-4f80-964a-3534ce933517)) (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp c7a7b76d-bb88-4f8f-a7a4-f5b41fab898a)) (pad "1" smd roundrect (at -1.1625 0 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 361 "Net-(L31-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 7a531db9-c52c-48d9-bb17-6bc0ce9bbc0a)) + (net 349 "Net-(L31-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 7a531db9-c52c-48d9-bb17-6bc0ce9bbc0a)) (pad "2" smd roundrect (at 1.1625 0 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 326b4ba6-fba6-4a22-98cb-c7fe2413e3a7)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" @@ -2550,9 +2466,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c9e61f4f-b691-49f2-bc9b-527fb319df84)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp fe74b5e8-73c3-4c19-b700-497b4e015512)) (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 334 "/Control on separate board/XTAL1") (pintype "passive") (tstamp 1807376d-dfd5-45a4-ab3b-a5c045eb4ddf)) + (net 323 "/Control on separate board/XTAL1") (pintype "passive") (tstamp 1807376d-dfd5-45a4-ab3b-a5c045eb4ddf)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 335 "/Control on separate board/XTAL2") (pintype "passive") (tstamp 5ae20f5f-fe47-411d-9434-34054f777f47)) + (net 324 "/Control on separate board/XTAL2") (pintype "passive") (tstamp 5ae20f5f-fe47-411d-9434-34054f777f47)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2562,7 +2478,7 @@ (footprint "Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 14dc32f6-e5b6-490f-a931-3b95f5aa1b33) - (at 166.624 57.404 180) + (at 167.132 52.832 180) (descr "Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2BASR33G00L") @@ -2594,9 +2510,9 @@ (fp_line (start -1 -0.6) (end 1 -0.6) (layer "F.Fab") (width 0.1) (tstamp bbc420ca-18e8-43e0-a73a-abee28e20d47)) (fp_line (start -1 0.6) (end -1 -0.6) (layer "F.Fab") (width 0.1) (tstamp eb12e364-66c6-4c46-b2d5-5cf9f5b1e3a9)) (pad "1" smd roundrect (at -1.025 0 180) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 282 "Net-(L21-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 2b4b3632-073c-4b99-899b-21ae2c2f8b72)) + (net 273 "Net-(L21-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 2b4b3632-073c-4b99-899b-21ae2c2f8b72)) (pad "2" smd roundrect (at 1.025 0 180) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 283 "Net-(L23-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 9bb2e518-de3e-440c-8af1-cb994a1fa79f)) + (net 274 "Net-(L23-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 9bb2e518-de3e-440c-8af1-cb994a1fa79f)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2633,7 +2549,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 15264f9d-9466-4ca0-a33a-6110af6eb9bc) - (at 165.735 206.151) + (at 129.794 147.32 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -2663,10 +2579,10 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 7122325e-8821-491b-b64e-9f85f60daff3)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c06976a6-84b7-42a4-911b-b45ea9880c26)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp ce611fd3-f04b-4b6d-ae1b-a2c5f68461d2)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 142 "Net-(C144-Pad2)") (pintype "passive") (tstamp 898c6465-88d8-484d-8e69-2a39beee1c17)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 143 "VGG2") (pintype "passive") (tstamp 29731d50-e348-45d0-a7b7-cf23858ca817)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 140 "Net-(C144-Pad2)") (pintype "passive") (tstamp 898c6465-88d8-484d-8e69-2a39beee1c17)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 141 "VGG2") (pintype "passive") (tstamp 29731d50-e348-45d0-a7b7-cf23858ca817)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2711,11 +2627,11 @@ (fp_line (start -0.175 -1.1) (end -0.675 -0.6) (layer "F.Fab") (width 0.1) (tstamp dc9ad4df-ee50-4c8b-be06-c06869b358c7)) (fp_line (start 0.675 -1.1) (end 0.675 1.1) (layer "F.Fab") (width 0.1) (tstamp dca6129f-ce1a-448e-8873-4cc4b9f5d2f5)) (pad "1" smd rect (at -1.33 -0.65) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 183 "Net-(D16-Pad2)") (pintype "passive") (tstamp dc3bd94c-ec04-432b-ab4c-b38072bb337e)) + (net 177 "Net-(D16-Pad2)") (pintype "passive") (tstamp dc3bd94c-ec04-432b-ab4c-b38072bb337e)) (pad "2" smd rect (at -1.33 0.65) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 182 "Net-(D16-Pad1)") (pintype "passive") (tstamp 3469e1a5-d3f2-4418-b8ec-177528f5de18)) + (net 176 "Net-(D16-Pad1)") (pintype "passive") (tstamp 3469e1a5-d3f2-4418-b8ec-177528f5de18)) (pad "3" smd rect (at 1.33 0) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 185 "Net-(D17-Pad3)") (pintype "passive") (tstamp 90d0d9a5-fde7-4682-a128-5075b9f1a41e)) + (net 179 "Net-(D17-Pad3)") (pintype "passive") (tstamp 90d0d9a5-fde7-4682-a128-5075b9f1a41e)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-323_SC-70.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2725,7 +2641,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 15fc0413-5781-4122-8158-a89ef1c48e4f) - (at 141.495 231.581) + (at 136.144 189.484 -90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -2733,15 +2649,15 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-000060629fab") (attr smd) - (fp_text reference "R140" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R140" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 55181577-4035-4b96-b9c0-3d1c4b70caa2) ) - (fp_text value "270" (at 0 1.43) (layer "F.Fab") + (fp_text value "270" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 7527c651-861c-4be2-8142-52375edd0934) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 0f086471-7e16-4e36-bed8-9b16a0009323) ) @@ -2755,10 +2671,10 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 1ed76e65-68b1-4301-b04f-5dbc66cfcacd)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 8e4cc710-2d29-4729-94ea-42b1303c5bc5)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp a65a9859-c612-42b6-985a-3a5e99e0f7de)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 322 "Net-(R140-Pad1)") (pintype "passive") (tstamp 5e9c2452-1f68-42cb-8bab-a800fc70aab1)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 323 "Net-(J27-Pad1)") (pintype "passive") (tstamp 89a4784e-82c9-4b6f-8b6c-8712aab6eafc)) + (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 311 "Net-(R140-Pad1)") (pintype "passive") (tstamp 5e9c2452-1f68-42cb-8bab-a800fc70aab1)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 312 "Net-(J27-Pad1)") (pintype "passive") (tstamp 89a4784e-82c9-4b6f-8b6c-8712aab6eafc)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -2855,7 +2771,7 @@ (footprint "Potentiometer_SMD:Potentiometer_Bourns_3214W_Vertical" (layer "F.Cu") (tedit 5A3D7171) (tstamp 16ca3596-7e3f-4ba5-bc08-3da5a247f38e) - (at 119.225 235.301) + (at 156.464 137.16) (descr "Potentiometer, vertical, Bourns 3214W, https://www.bourns.com/docs/Product-Datasheets/3214.pdf") (tags "Potentiometer vertical Bourns 3214W") (property "MPN" "Bourns 3214W-1-102E") @@ -2895,9 +2811,9 @@ (fp_line (start -1.2 1.393) (end -1.199 -0.092) (layer "F.Fab") (width 0.1) (tstamp d567c36d-9500-49d4-b4c0-3c170dcbd2fe)) (fp_circle (center -1.2 0.65) (end -0.45 0.65) (layer "F.Fab") (width 0.1) (fill none) (tstamp 051212a4-466e-4b65-b784-d10ea57f5d49)) (pad "1" smd rect (at 1.25 -1.45) (size 1.3 1.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 154 "Net-(C161-Pad2)") (pinfunction "1") (pintype "passive") (tstamp b63607b9-85c2-4a94-8316-536d9dd7bd9a)) + (net 147 "/PA 70MHz/VG_5V") (pinfunction "1") (pintype "passive") (tstamp b63607b9-85c2-4a94-8316-536d9dd7bd9a)) (pad "2" smd rect (at 0 1.45) (size 2 1.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 325 "Net-(R159-Pad1)") (pinfunction "2") (pintype "passive") (tstamp c738cb87-9d3d-478e-93ef-dd5e83c59202)) + (net 314 "Net-(R159-Pad1)") (pinfunction "2") (pintype "passive") (tstamp c738cb87-9d3d-478e-93ef-dd5e83c59202)) (pad "3" smd rect (at -1.25 -1.45) (size 1.3 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "3") (pintype "passive") (tstamp 6f6ede3d-256e-4586-9064-5a301455fb2e)) (model "${KICAD6_3DMODEL_DIR}/Potentiometer_SMD.3dshapes/Potentiometer_Bourns_3214W_Vertical.wrl" @@ -2907,56 +2823,6 @@ ) ) - (footprint "Package_TO_SOT_SMD:SOT-223-3_TabPin2" (layer "F.Cu") - (tedit 5A02FF57) (tstamp 16cd5eb4-f5d8-4bd2-b7ca-e012e0833188) - (at 124.785 218.211) - (descr "module CMS SOT223 4 pins") - (tags "CMS SOT") - (property "Need_order" "0") - (property "Sheetfile" "pa_70.kicad_sch") - (property "Sheetname" "PA 70MHz") - (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-000060783d01") - (attr smd) - (fp_text reference "U10" (at 0 -4.5) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp f94c8b96-2a6a-4903-836a-502210e15e56) - ) - (fp_text value "LD1117S50" (at 0 4.5) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 890d26a7-00dc-4f79-9d7c-cfc67e9591dd) - ) - (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") - (effects (font (size 0.8 0.8) (thickness 0.12))) - (tstamp 70812cb6-1379-42c0-9720-bc0aacf1ebd0) - ) - (fp_line (start 1.91 -3.41) (end 1.91 -2.15) (layer "F.SilkS") (width 0.12) (tstamp 75cdf5e9-ce74-489e-9c66-13dca65e3ed7)) - (fp_line (start -4.1 -3.41) (end 1.91 -3.41) (layer "F.SilkS") (width 0.12) (tstamp 7ac00ed2-4d6a-4a7d-b44f-1d02657c1fee)) - (fp_line (start 1.91 3.41) (end 1.91 2.15) (layer "F.SilkS") (width 0.12) (tstamp b5a1c0b7-efaf-48a7-ac75-0f341df79ed7)) - (fp_line (start -1.85 3.41) (end 1.91 3.41) (layer "F.SilkS") (width 0.12) (tstamp c1c6f953-6813-41e6-9b08-c79e5a32b4ec)) - (fp_line (start -4.4 3.6) (end 4.4 3.6) (layer "F.CrtYd") (width 0.05) (tstamp 1e234840-f0e5-45a4-93a2-e552130c7b84)) - (fp_line (start 4.4 3.6) (end 4.4 -3.6) (layer "F.CrtYd") (width 0.05) (tstamp 5f728b02-cc3b-41ee-a4c9-d5eded962456)) - (fp_line (start 4.4 -3.6) (end -4.4 -3.6) (layer "F.CrtYd") (width 0.05) (tstamp 6bb5797a-8b62-47fa-8a78-0610a4833cbe)) - (fp_line (start -4.4 -3.6) (end -4.4 3.6) (layer "F.CrtYd") (width 0.05) (tstamp d75769d1-e748-437c-a1ec-81f29fae18a0)) - (fp_line (start -1.85 3.35) (end 1.85 3.35) (layer "F.Fab") (width 0.1) (tstamp 03349828-b6c3-43b0-addc-4db6fc85cca2)) - (fp_line (start -1.85 -2.35) (end -1.85 3.35) (layer "F.Fab") (width 0.1) (tstamp 3cccb7ad-e855-4288-8808-ceefb17ee7fe)) - (fp_line (start 1.85 -3.35) (end 1.85 3.35) (layer "F.Fab") (width 0.1) (tstamp 4fb89d22-01e4-4343-884b-8766141c65ed)) - (fp_line (start -1.85 -2.35) (end -0.85 -3.35) (layer "F.Fab") (width 0.1) (tstamp c7f4f4d2-7b72-454e-bd19-c398655608b0)) - (fp_line (start -0.85 -3.35) (end 1.85 -3.35) (layer "F.Fab") (width 0.1) (tstamp fb4f724d-0174-4d54-bc53-5f794e1ad964)) - (pad "1" smd rect (at -3.15 -2.3) (size 2 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 2 "GND") (pinfunction "GND") (pintype "power_in") (tstamp 354aaf3d-bf64-48a0-83b6-234695e7076d)) - (pad "2" smd rect (at -3.15 0) (size 2 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 150 "/PA 70MHz/VG_5V") (pinfunction "VO") (pintype "power_out") (tstamp 2e00c070-fffc-4142-b4d8-c03e6f45a1b5)) - (pad "2" smd rect (at 3.15 0) (size 2 3.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 150 "/PA 70MHz/VG_5V") (pinfunction "VO") (pintype "power_out") (tstamp d6d4cb1e-4994-4e3d-b205-80f61b27c964)) - (pad "3" smd rect (at -3.15 2.3) (size 2 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 244 "Net-(Q30-Pad5)") (pinfunction "VI") (pintype "power_in") (tstamp 6b468b49-8494-420a-b118-ee70fc92e48d)) - (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-223.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 1714f711-342a-41ba-94a6-301d6d679207) (at 241.427 68.834 90) @@ -3003,7 +2869,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp 171b13e0-ecb1-42dd-a178-46d57ced67e0) - (at 97.282 73.66) + (at 94.742 73.645) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -3103,7 +2969,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 17af8c6e-8a91-4da4-bc77-b6fe2ea158f2) - (at 68.326 34.798 -90) + (at 72.136 34.798 -90) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "") @@ -3234,7 +3100,7 @@ ) (width 0) (fill yes)) ) (tstamp 19e470fc-485e-4893-af82-641797ce70a0)) (pad "2" smd custom (at 0.725 0 90) (size 0.3 0.3) (layers "F.Cu" "F.Mask") - (net 278 "/LO1") (pinfunction "B") (pintype "passive") (zone_connect 2) + (net 269 "/LO1") (pinfunction "B") (pintype "passive") (zone_connect 2) (options (clearance outline) (anchor rect)) (primitives (gr_poly (pts @@ -3291,34 +3157,6 @@ ) ) - (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") - (tedit 56D1B4CB) (tstamp 19bf7f0b-b8b5-4706-b3cb-7270a54a8889) - (at 116.796 171.526) - (descr "Mounting Hole 3.2mm, M3, DIN965") - (tags "mounting hole 3.2mm m3 din965") - (property "Need_order" "0") - (property "Sheetfile" "kicad-dart-70.kicad_sch") - (property "Sheetname" "") - (path "/927e15a9-14f1-4a0e-8415-452a97f81e82") - (attr exclude_from_pos_files) - (fp_text reference "H39" (at 0 -3.8) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 79d08bf1-19bc-4d03-aede-498c7366c5bf) - ) - (fp_text value "M3" (at 0 3.8) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 654489fb-6b89-4a65-b9f8-b2b910596db3) - ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp b525f623-d150-4bae-9485-6de314222468) - ) - (fp_circle (center 0 0) (end 2.8 0) (layer "Cmts.User") (width 0.15) (fill none) (tstamp b65d849e-456e-4bc6-b673-1d285eba856b)) - (fp_circle (center 0 0) (end 3.05 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp 1e2e50ab-1412-4543-a6e9-a8eff620946e)) - (pad "1" thru_hole circle (at 0 0) (size 5.6 5.6) (drill 3.2) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "1") (pintype "input") (tstamp dda9d4d8-900f-4d15-b46a-627195d13712)) - ) - (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 19cdac16-ad4a-4657-823c-1b4a4510f1b2) (at 89.408 52.578 -90) @@ -3522,7 +3360,7 @@ (footprint "mpb:TO-220-3_Vertical_SMD" (layer "F.Cu") (tedit 605B297E) (tstamp 1c1eebce-3ee0-4d91-b1d4-9bfd3669f304) - (at 123.575 201.151) + (at 132.344 185.581 180) (descr "TO-220-3, Horizontal, RM 2.54mm, see https://www.vishay.com/docs/66542/to-220-1.pdf") (tags "TO-220-3 Horizontal RM 2.54mm") (property "Need_order" "0") @@ -3562,12 +3400,12 @@ (fp_line (start 0 -3.81) (end 0 0) (layer "F.Fab") (width 0.1) (tstamp e20350a7-70b4-4d69-ac80-25b438d306cd)) (fp_line (start 7.54 -3.81) (end -2.46 -3.81) (layer "F.Fab") (width 0.1) (tstamp f635e859-a717-4ddc-a33d-bc8fc44abf86)) (fp_line (start 2.54 -3.81) (end 2.54 0) (layer "F.Fab") (width 0.1) (tstamp ff76681f-bc7e-4585-896f-fb7d1da0def7)) - (pad "1" smd rect locked (at 0 -0.85) (size 2 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 322 "Net-(R140-Pad1)") (pinfunction "ADJ") (pintype "input") (tstamp 323fb558-e7ca-4134-801c-eaee28b751ed)) - (pad "2" smd rect locked (at 2.54 -0.85) (size 2 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 323 "Net-(J27-Pad1)") (pinfunction "VO") (pintype "power_out") (tstamp e19f51b7-884e-4be7-8671-1076c7743b29)) - (pad "3" smd rect locked (at 5.08 -0.85) (size 2 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 135 "/PA 70MHz/12V") (pinfunction "VI") (pintype "power_in") (tstamp 3fc4578d-9915-4004-8df0-7e8164fd6d1e)) + (pad "1" smd rect locked (at 0 -0.85 180) (size 2 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 311 "Net-(R140-Pad1)") (pinfunction "ADJ") (pintype "input") (tstamp 323fb558-e7ca-4134-801c-eaee28b751ed)) + (pad "2" smd rect locked (at 2.54 -0.85 180) (size 2 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 312 "Net-(J27-Pad1)") (pinfunction "VO") (pintype "power_out") (tstamp e19f51b7-884e-4be7-8671-1076c7743b29)) + (pad "3" smd rect locked (at 5.08 -0.85 180) (size 2 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 366 "Net-(J17-Pad1)") (pinfunction "VI") (pintype "power_in") (tstamp 3fc4578d-9915-4004-8df0-7e8164fd6d1e)) (model "${KISYS3DMOD}/Package_TO_SOT_THT.3dshapes/TO-220-3_Horizontal_TabDown.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -3577,7 +3415,7 @@ (footprint "Package_TO_SOT_SMD:SOT-143" (layer "F.Cu") (tedit 61E30312) (tstamp 1c337858-4043-4c00-896c-ac5b41d4a80f) - (at 169.164 89.408) + (at 171.196 89.408) (descr "SOT-143 https://www.nxp.com/docs/en/package-information/SOT143B.pdf") (tags "SOT-143") (property "MPN" "BF998E6327HTSA1") @@ -3610,7 +3448,7 @@ (fp_line (start 0.65 -1.45) (end 0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp c1b47e1a-de4d-4c9a-95df-07b0f6ae12b5)) (fp_line (start 0.65 1.45) (end -0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp d92cb9e3-3ea7-4579-bbf3-168649b7fa20)) (pad "1" smd rect (at -1 -0.75) (size 0.7 1) (layers "F.Cu" "F.Paste" "F.Mask") - (net 304 "Net-(Q23-Pad1)") (pinfunction "D") (pintype "passive") (tstamp c79a00a2-0781-4648-8bb7-839ae32b3be0)) + (net 294 "Net-(Q23-Pad1)") (pinfunction "D") (pintype "passive") (tstamp c79a00a2-0781-4648-8bb7-839ae32b3be0)) (pad "2" smd rect (at -1 0.95) (size 0.7 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (net 114 "Net-(C108-Pad1)") (pinfunction "S") (pintype "passive") (tstamp a714484a-a9d6-49b7-b416-7baab6468f4f)) (pad "3" smd rect (at 1 0.95) (size 0.7 0.6) (layers "F.Cu" "F.Paste" "F.Mask") @@ -3661,7 +3499,7 @@ (fp_line (start 0.65 1.45) (end -0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp 70203a34-1f3f-4c9b-a108-852ba7c4a57f)) (fp_line (start -0.65 -1.125) (end -0.325 -1.45) (layer "F.Fab") (width 0.1) (tstamp 9bfac9c3-8392-4f21-9ce4-5733ebcc9e55)) (pad "1" smd roundrect (at -0.9375 -0.95 270) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 302 "Net-(Q20-Pad1)") (pinfunction "B") (pintype "input") (tstamp bacb6af0-595b-4bd8-b746-4a8c2ef5f159)) + (net 292 "Net-(Q20-Pad1)") (pinfunction "B") (pintype "input") (tstamp bacb6af0-595b-4bd8-b746-4a8c2ef5f159)) (pad "2" smd roundrect (at -0.9375 0.95 270) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 81 "Net-(C69-Pad2)") (pinfunction "E") (pintype "passive") (tstamp ffaad932-3fe0-4f5e-aaf3-72071dee7f25)) (pad "3" smd roundrect (at 0.9375 0 270) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) @@ -3707,7 +3545,7 @@ (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 719f031a-6b57-4cdc-ad86-236ec9e32f29)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 828c4d84-3a40-43ba-b1fa-4cd0d24e8937)) (pad "1" smd roundrect (at -0.8625 0 270) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 161 "Net-(C171-Pad1)") (pintype "passive") (tstamp c126935b-5d7b-475c-8280-40403137fd95)) + (net 155 "Net-(C171-Pad1)") (pintype "passive") (tstamp c126935b-5d7b-475c-8280-40403137fd95)) (pad "2" smd roundrect (at 0.8625 0 270) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp d967f412-7372-4751-a884-72c3264c9a6b)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" @@ -3769,7 +3607,7 @@ (footprint "mpb:four_4mm_pads_narrow" (layer "F.Cu") (tedit 60603814) (tstamp 1dba06d5-42fc-43d3-8791-f3ab4331d8dc) - (at 186.944 79.502 90) + (at 189.103 80.264 90) (property "Need_order" "0") (property "Sheetfile" "frontend_70.kicad_sch") (property "Sheetname" "70MHz VHF Frontend") @@ -3792,7 +3630,7 @@ (pad "1" smd rect locked (at -4.2 -4.1 90) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") (net 115 "Net-(C109-Pad2)") (pinfunction "AA") (pintype "passive") (tstamp a6dce2d1-bb0c-49f6-b8d8-6aa61c912c06)) (pad "2" smd rect locked (at -4.2 3.9 90) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 304 "Net-(Q23-Pad1)") (pinfunction "AB") (pintype "passive") (tstamp 90f7d5ca-acc4-4e6f-9343-debfb787e2a1)) + (net 294 "Net-(Q23-Pad1)") (pinfunction "AB") (pintype "passive") (tstamp 90f7d5ca-acc4-4e6f-9343-debfb787e2a1)) (pad "3" smd rect locked (at 4.2 -4.1 90) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "SA") (pintype "passive") (tstamp 4068b5ba-1509-4860-a3cc-d1483c2a956e)) (pad "4" smd rect locked (at 4.2 3.9 90) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") @@ -3836,11 +3674,11 @@ (fp_line (start -0.65 -1.125) (end -0.325 -1.45) (layer "F.Fab") (width 0.1) (tstamp d615dd8b-cd20-4447-8a83-838ea0e839ca)) (fp_line (start -0.65 1.45) (end -0.65 -1.125) (layer "F.Fab") (width 0.1) (tstamp eb203eda-6e7c-42c8-a0ab-2e698a88f787)) (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 295 "Net-(Q11-Pad1)") (pinfunction "B") (pintype "input") (tstamp 701f64e8-d679-4a03-a93f-c479cbade1fe)) + (net 285 "Net-(Q11-Pad1)") (pinfunction "B") (pintype "input") (tstamp 701f64e8-d679-4a03-a93f-c479cbade1fe)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 61 "Net-(C53-Pad1)") (pinfunction "E") (pintype "passive") (tstamp deb374d4-f74e-4cca-8c8d-428e986866af)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 296 "Net-(Q11-Pad3)") (pinfunction "C") (pintype "passive") (tstamp baa35e80-0b3e-40f5-afc8-6a9213bbcbe2)) + (net 286 "Net-(Q11-Pad3)") (pinfunction "C") (pintype "passive") (tstamp baa35e80-0b3e-40f5-afc8-6a9213bbcbe2)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -3878,7 +3716,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 1e8927eb-a42c-4837-86dc-d424c693e151) - (at 186.817 74.168) + (at 188.976 74.93) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -3955,7 +3793,7 @@ (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 03d58b1e-e057-4f2e-8094-e6160d50f6c4)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 163 "Net-(C173-Pad2)") (pintype "passive") (tstamp 552a3d21-c4db-440a-890d-2d4a8e255324)) + (net 157 "Net-(C173-Pad2)") (pintype "passive") (tstamp 552a3d21-c4db-440a-890d-2d4a8e255324)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -3996,7 +3834,7 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 46bdaed7-b1a6-418c-ae6c-25b11e0edb98)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp b2519a44-3bf2-466f-aa15-faa59f3b73bd)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 302 "Net-(Q20-Pad1)") (pintype "passive") (tstamp ac80163e-910b-4626-89c0-984bed500b71)) + (net 292 "Net-(Q20-Pad1)") (pintype "passive") (tstamp ac80163e-910b-4626-89c0-984bed500b71)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 4db90c3e-3c23-4d35-9a20-5f241ba2170d)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -4053,7 +3891,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 20ce34bd-5cf8-493f-a71e-5450c1b7d3f4) - (at 61.468 22.098 180) + (at 68.326 24.384 180) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM188R71H104KA93D") @@ -4097,17 +3935,17 @@ (footprint "mpb:four_4mm_pads_narrow" (layer "F.Cu") (tedit 60603814) (tstamp 219bb6a6-60be-4313-9481-eeba8a33686b) - (at 96.58 231.726) + (at 134.874 167.894 90) (property "Need_order" "0") (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-000060563081") (attr through_hole) - (fp_text reference "T8" (at 0.3 -5 180) (layer "F.SilkS") + (fp_text reference "T8" (at 0.3 -5 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 2a59d6d3-8566-401b-9f11-df6b6a9b911e) ) - (fp_text value "1:1" (at 0 -0.1) (layer "F.Fab") + (fp_text value "1:1" (at 0 -0.1 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 52eaa63b-64b4-4969-8fc2-34436fb59902) ) @@ -4117,14 +3955,14 @@ (fp_line (start -1.95 5.65) (end 2.1 5.65) (layer "F.SilkS") (width 0.15) (tstamp 8107da72-2539-47c4-ad25-9490bcb1e519)) (fp_line (start -5.95 -1.85) (end -1.95 -1.85) (layer "F.SilkS") (width 0.15) (tstamp 9d0bbe6a-52b6-4f0e-b323-8752908fbbd2)) (fp_line (start -1.95 -5.85) (end -1.95 -1.85) (layer "F.SilkS") (width 0.15) (tstamp aafd9c43-297b-4b7b-9102-505f1d458e12)) - (pad "1" smd rect locked (at -4.2 -4.1) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 148 "Net-(C149-Pad1)") (pinfunction "AA") (pintype "passive") (tstamp 87e866f2-79e1-4dc1-bf55-b8db3a973f5b)) - (pad "2" smd rect locked (at -4.2 3.9) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 145 "Net-(C147-Pad2)") (pinfunction "AB") (pintype "passive") (tstamp 10e4097c-af47-4d13-bf85-49c366a07a33)) - (pad "3" smd rect locked (at 4.2 -4.1) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 148 "Net-(C149-Pad1)") (pinfunction "SA") (pintype "passive") (tstamp 5e728753-883d-463b-9c9d-8b3c8377b426)) - (pad "4" smd rect locked (at 4.2 3.9) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 147 "Net-(C148-Pad2)") (pinfunction "SB") (pintype "passive") (tstamp 4ef39078-b5ea-4fad-b2bc-df399bb5b96f)) + (pad "1" smd rect locked (at -4.2 -4.1 90) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 361 "/PA 70MHz/V_{DD}") (pinfunction "AA") (pintype "passive") (tstamp 87e866f2-79e1-4dc1-bf55-b8db3a973f5b)) + (pad "2" smd rect locked (at -4.2 3.9 90) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 143 "Net-(C147-Pad2)") (pinfunction "AB") (pintype "passive") (tstamp 10e4097c-af47-4d13-bf85-49c366a07a33)) + (pad "3" smd rect locked (at 4.2 -4.1 90) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 361 "/PA 70MHz/V_{DD}") (pinfunction "SA") (pintype "passive") (tstamp 5e728753-883d-463b-9c9d-8b3c8377b426)) + (pad "4" smd rect locked (at 4.2 3.9 90) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 145 "Net-(C148-Pad2)") (pinfunction "SB") (pintype "passive") (tstamp 4ef39078-b5ea-4fad-b2bc-df399bb5b96f)) ) (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") @@ -4191,7 +4029,7 @@ (pad "1" smd roundrect (at -0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 07be95cd-0e8b-4e46-ac64-5f69d16099b6)) (pad "2" smd roundrect (at 0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 350 "/+3V3_CLK") (pintype "passive") (tstamp cfb97e70-828a-4eae-81cd-afc1bf118764)) + (net 339 "/+3V3_CLK") (pintype "passive") (tstamp cfb97e70-828a-4eae-81cd-afc1bf118764)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -4201,7 +4039,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 2233d089-3a5c-47e8-97c3-4821d29727b0) - (at 160.595 212.801) + (at 156.718 133.858 180) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM188R71H104KA93D") @@ -4232,10 +4070,10 @@ (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 770fc41e-05ef-469e-b39a-59cf30dfd03d)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 831d59b9-1d72-4b4c-bccc-9b8ad6e87783)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp d4234bb2-c154-4b3b-a00a-48e6700264bd)) - (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 85a2abe1-e801-4a0e-a18e-85ddcbf72c90)) - (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 154 "Net-(C161-Pad2)") (pintype "passive") (tstamp 6c534003-eff5-4a7e-bc71-187544ace3ab)) + (pad "2" smd roundrect (at 0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 147 "/PA 70MHz/VG_5V") (pintype "passive") (tstamp 6c534003-eff5-4a7e-bc71-187544ace3ab)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -4338,13 +4176,13 @@ (pad "" np_thru_hole circle (at 0 -2.5 90) (size 1.7 1.7) (drill 1.7) (layers *.Cu *.Mask) (tstamp 0d4fe96d-41a9-4a6e-b9ab-21f611b7addb)) (pad "" np_thru_hole circle (at 0 4.5 90) (size 1.7 1.7) (drill 1.7) (layers *.Cu *.Mask) (tstamp 69413270-dbfd-48f6-aa5c-6f0cbaba1706)) (pad "R" smd rect (at 3.7 -1.6 90) (size 2.8 2.2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 218 "Net-(J4-PadR)") (pintype "passive") (tstamp a43cafa1-b44c-4af8-b750-d20f11682e88)) + (net 211 "Net-(J4-PadR)") (pintype "passive") (tstamp a43cafa1-b44c-4af8-b750-d20f11682e88)) (pad "S" smd rect (at -3.7 -3.6 90) (size 2.8 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pintype "passive") (tstamp 820f2511-f28f-43a2-8c13-a4efc08995d8)) (pad "T" smd rect (at -3.7 5.8 90) (size 2.8 2.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 218 "Net-(J4-PadR)") (pintype "passive") (tstamp 2cbae75a-1ff3-43a4-8808-40bd53d17f0b)) + (net 211 "Net-(J4-PadR)") (pintype "passive") (tstamp 2cbae75a-1ff3-43a4-8808-40bd53d17f0b)) (pad "TN" smd rect (at 0.75 9.8 90) (size 2.8 2.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 219 "Net-(J4-PadTN)") (pintype "passive") (tstamp 0a779efe-3c6d-4fb7-a3da-895f381cdc61)) + (net 212 "Net-(J4-PadTN)") (pintype "passive") (tstamp 0a779efe-3c6d-4fb7-a3da-895f381cdc61)) (model "${KICAD6_3DMODEL_DIR}/Connector_Audio.3dshapes/Jack_3.5mm_CUI_SJ-3524-SMT_Horizontal.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -4441,7 +4279,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 243293a1-a967-4e4a-8317-61ba2ee39da7) - (at 169.926 74.422 -90) + (at 169.164 72.898 -90) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A103KXJTBC") @@ -4521,7 +4359,7 @@ (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp d234dad9-c6eb-4a6f-88b2-d74b978ca1a9)) (fp_line (start 1.27 1.27) (end -1.27 1.27) (layer "F.Fab") (width 0.1) (tstamp ef38be85-c812-448c-98da-75f9a653b18f)) (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 210 "Net-(FB1-Pad2)") (pinfunction "Pin_1") (pintype "passive") (tstamp 3dbd57e5-a9f9-4ed9-8d4c-fdf8e4d4e2b5)) + (net 204 "Net-(FB1-Pad2)") (pinfunction "Pin_1") (pintype "passive") (tstamp 3dbd57e5-a9f9-4ed9-8d4c-fdf8e4d4e2b5)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x01_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -4594,9 +4432,9 @@ (fp_line (start -0.325 -1.45) (end 0.65 -1.45) (layer "F.Fab") (width 0.1) (tstamp d5fbdfd4-2905-4d9e-bf69-4d4d2016ae92)) (fp_line (start 0.65 1.45) (end -0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp f32a5d83-adba-461d-aea0-378d9769e47b)) (pad "1" smd roundrect (at -0.9375 -0.95 270) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 303 "Net-(Q21-Pad1)") (pinfunction "B") (pintype "input") (tstamp 678faa75-5f31-4e9f-bc80-9e474cade371)) + (net 293 "Net-(Q21-Pad1)") (pinfunction "B") (pintype "input") (tstamp 678faa75-5f31-4e9f-bc80-9e474cade371)) (pad "2" smd roundrect (at -0.9375 0.95 270) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 302 "Net-(Q20-Pad1)") (pinfunction "E") (pintype "passive") (tstamp 0f0b2332-f473-454d-9e50-cd0cdefaa810)) + (net 292 "Net-(Q20-Pad1)") (pinfunction "E") (pintype "passive") (tstamp 0f0b2332-f473-454d-9e50-cd0cdefaa810)) (pad "3" smd roundrect (at 0.9375 0 270) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 87 "Net-(C74-Pad2)") (pinfunction "C") (pintype "passive") (tstamp 8233f920-a5ec-4de3-8610-66691d8bba74)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" @@ -4669,13 +4507,13 @@ (fp_line (start 14.2 -3.7) (end 0.8 -3.7) (layer "F.Fab") (width 0.1) (tstamp d325045f-6cc3-48a2-a004-6f6b5e4033ae)) (fp_circle (center 7.5 2.5) (end 10.5 2.5) (layer "F.Fab") (width 0.1) (fill none) (tstamp 39cf85ec-83d4-4bda-aa79-dface07bf264)) (pad "A" thru_hole circle (at 0 0 90) (size 1.524 1.524) (drill 1) (layers *.Cu *.Mask) - (net 326 "Net-(R160-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 8e7137a1-844f-4c2c-892a-00e58d0d4ab1)) + (net 315 "Net-(R160-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 8e7137a1-844f-4c2c-892a-00e58d0d4ab1)) (pad "B" thru_hole circle (at 0 5 90) (size 1.524 1.524) (drill 1) (layers *.Cu *.Mask) - (net 327 "Net-(R161-Pad2)") (pinfunction "B") (pintype "passive") (tstamp 74a36e7c-3d27-4f05-bd53-a3d49330e1dd)) + (net 316 "Net-(R161-Pad2)") (pinfunction "B") (pintype "passive") (tstamp 74a36e7c-3d27-4f05-bd53-a3d49330e1dd)) (pad "C" thru_hole circle (at 0 2.5 90) (size 1.524 1.524) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "C") (pintype "passive") (tstamp f35e460b-78cf-4de0-8f5d-014843b32d6f)) (pad "S1" thru_hole circle (at 14.5 0 90) (size 1.524 1.524) (drill 1) (layers *.Cu *.Mask) - (net 332 "Net-(R168-Pad1)") (pinfunction "S1") (pintype "passive") (tstamp 30f76627-8aae-4ab8-ae96-1a9a3588a91c)) + (net 321 "Net-(R168-Pad1)") (pinfunction "S1") (pintype "passive") (tstamp 30f76627-8aae-4ab8-ae96-1a9a3588a91c)) (pad "S2" thru_hole circle (at 14.5 5 90) (size 1.524 1.524) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "S2") (pintype "passive") (tstamp f30c4e38-992e-4082-95ee-84f370d6314b)) (pad "SH" thru_hole oval (at 7.5 9.1 90) (size 2.9 3) (drill oval 2.1 2.2) (layers *.Cu *.Mask) (tstamp 08e811e0-43d0-4093-bcb2-a43d7960b0dc)) @@ -4723,7 +4561,7 @@ (pad "1" smd roundrect (at -1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 110 "Net-(C103-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 347926ba-ff03-4658-9015-44f418d3e337)) (pad "2" smd roundrect (at 1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 361 "Net-(L31-Pad2)") (pinfunction "2") (pintype "passive") (tstamp a89be89c-b875-4aab-adeb-ef57971adcba)) + (net 349 "Net-(L31-Pad2)") (pinfunction "2") (pintype "passive") (tstamp a89be89c-b875-4aab-adeb-ef57971adcba)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -4733,18 +4571,18 @@ (footprint "mpb:AirCoil-8mm-or-2-series-1008" (layer "F.Cu") (tedit 5E4EB890) (tstamp 2599b5e9-8a6e-4c71-852b-c19eafc55102) - (at 187.146 57.624 90) + (at 187.926 58.218 180) (property "MPN" "2x LQW2UASR56") (property "Need_order" "1") (property "Sheetfile" "frontend_70.kicad_sch") (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/9b0085fd-b0c9-494f-b8af-530ec0ab6b98") (attr through_hole) - (fp_text reference "L32" (at 2.5 0) (layer "F.SilkS") + (fp_text reference "L32" (at 2.5 0 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 625611e7-9b97-4f1f-90c3-583b36296b0a) ) - (fp_text value "110nH" (at -2.5 0) (layer "F.Fab") + (fp_text value "110nH" (at -2.5 0 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 3c98bc54-cf72-4c7a-b3a8-d0caf054a524) ) @@ -4766,15 +4604,15 @@ (fp_line (start 1.05 2.73) (end -0.95 2.73) (layer "F.Fab") (width 0.1) (tstamp baa508a9-65e6-4511-9e11-002ca9b52823)) (fp_line (start 1.05 -2.87) (end 1.05 -0.37) (layer "F.Fab") (width 0.1) (tstamp d1366447-5545-413a-95d2-70306f7a4eba)) (fp_line (start 1.05 -0.37) (end -0.95 -0.37) (layer "F.Fab") (width 0.1) (tstamp d19c306d-f529-4ccf-9240-8abc54989cdd)) - (pad "" smd roundrect (at 0.05 0.3175) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp 1e1c5db9-73e1-4db0-8a5a-1ace2b148080)) - (pad "" smd roundrect (at 0.05 -0.4575) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp e07d2ee2-a046-440f-92de-e5726bff737a)) - (pad "1" thru_hole circle (at 0 -4 90) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) + (pad "" smd roundrect (at 0.05 0.3175 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp 1e1c5db9-73e1-4db0-8a5a-1ace2b148080)) + (pad "" smd roundrect (at 0.05 -0.4575 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp e07d2ee2-a046-440f-92de-e5726bff737a)) + (pad "1" thru_hole circle (at 0 -4 180) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) (net 119 "Net-(C112-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 2bcd8c23-bcfe-4360-8222-82a06f191178)) - (pad "1" smd roundrect (at 0.05 -2.7825) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (pad "1" smd roundrect (at 0.05 -2.7825 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 119 "Net-(C112-Pad2)") (pinfunction "1") (pintype "passive") (tstamp c7902758-a509-4cfb-8741-0184bbc6b78d)) - (pad "2" smd roundrect (at 0.05 2.6425) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (pad "2" smd roundrect (at 0.05 2.6425 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 02e3ee15-73a0-492e-8fee-7a416e579a9c)) - (pad "2" thru_hole circle (at 0 4 90) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) + (pad "2" thru_hole circle (at 0 4 180) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 03bcb051-3559-4dbd-9149-99c4303ddb17)) ) @@ -4866,7 +4704,7 @@ (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 2a70ac32-5484-4335-a775-b79aa87d878b) - (at 169.926 80.772 -90) + (at 169.164 77.216 -90) (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2UAS1R0x0CL") @@ -4910,18 +4748,18 @@ (footprint "mpb:AirCoil-8mm-or-2-series-1008" (layer "F.Cu") (tedit 5E4EB890) (tstamp 2ab86cba-841f-4e44-8708-8e6901f869ce) - (at 186.944 38.862 -90) + (at 181.864 29.21) (property "MPN" "2x LQW2UASR56") (property "Need_order" "1") (property "Sheetfile" "frontend_70.kicad_sch") (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/98f20cbd-51ca-49ad-9943-66c2345d9535") (attr through_hole) - (fp_text reference "L35" (at 2.5 0) (layer "F.SilkS") + (fp_text reference "L35" (at 2.5 0 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 4118f0be-aed2-4ef4-b2d7-bd4024fe129d) ) - (fp_text value "110nH" (at -2.5 0) (layer "F.Fab") + (fp_text value "110nH" (at -2.5 0 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp c59eede6-ca3e-44ad-a7c3-09897cee692b) ) @@ -4943,21 +4781,21 @@ (fp_line (start -0.95 -2.87) (end 1.05 -2.87) (layer "F.Fab") (width 0.1) (tstamp 8add5541-843b-436e-895e-884809daaf70)) (fp_line (start -0.95 -0.37) (end -0.95 -2.87) (layer "F.Fab") (width 0.1) (tstamp 8eece01e-4e0b-4ca6-ab47-1e8994f7affb)) (fp_line (start 1.05 -0.37) (end -0.95 -0.37) (layer "F.Fab") (width 0.1) (tstamp 8f497665-6028-45f7-b81b-e5ef68d93b9a)) - (pad "" smd roundrect (at 0.05 0.3175 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp a1efff23-2db1-4369-abee-97903bdab860)) - (pad "" smd roundrect (at 0.05 -0.4575 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp fbbe65dc-1323-4b79-b66e-2f4f850becbb)) - (pad "1" smd roundrect (at 0.05 -2.7825 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (pad "" smd roundrect (at 0.05 0.3175 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp a1efff23-2db1-4369-abee-97903bdab860)) + (pad "" smd roundrect (at 0.05 -0.4575 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp fbbe65dc-1323-4b79-b66e-2f4f850becbb)) + (pad "1" smd roundrect (at 0.05 -2.7825 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 125 "Net-(C121-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 4de6c6d8-5080-4f3a-8fc2-9327656edfd4)) - (pad "1" thru_hole circle (at 0 -4 270) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) + (pad "1" thru_hole circle (at 0 -4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) (net 125 "Net-(C121-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 85a8695f-c797-4c57-a94e-a877e143b672)) - (pad "2" thru_hole circle (at 0 4 270) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) + (pad "2" thru_hole circle (at 0 4) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 2df3161d-b1d5-4b72-a902-0d8f1312184a)) - (pad "2" smd roundrect (at 0.05 2.6425 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (pad "2" smd roundrect (at 0.05 2.6425 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 5615a937-1821-4410-af7f-cdbfb2d35f54)) ) (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 2ae4d229-4866-4747-963b-44872aa382e3) - (at 138.545 234.091) + (at 126.746 -9.144 -90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -4965,15 +4803,15 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-000060693651") (attr smd) - (fp_text reference "R137" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R137" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp c680e302-7d31-4733-b685-0b1cdc4d655e) ) - (fp_text value "DNF" (at 0 1.43) (layer "F.Fab") + (fp_text value "DNF" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp c597c4c4-244d-4d74-9e7d-c37612702ae2) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 84d11d14-e6cb-4ad0-9a31-3ae554130933) ) @@ -4987,10 +4825,10 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 9b9c9c11-c17d-4e8e-88c5-e8d7b02c6163)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 9d49aaca-2d20-4b70-84fb-624cb50fd0ae)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp dfb4f455-728e-44e2-9c00-14caac9cbfa6)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 321 "Net-(R135-Pad1)") (pintype "passive") (tstamp 5f1beaf3-6f50-45c9-bdda-61743f7fd7e4)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 134 "Net-(C136-Pad2)") (pintype "passive") (tstamp 2c172efb-cf07-4470-a7b2-98911617accb)) + (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 2 "GND") (pintype "passive") (tstamp 5f1beaf3-6f50-45c9-bdda-61743f7fd7e4)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 364 "Net-(R136-Pad1)") (pintype "passive") (tstamp 2c172efb-cf07-4470-a7b2-98911617accb)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -5039,9 +4877,9 @@ (pad "2" smd roundrect (at -2.475 -0.635 180) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 30 "Net-(C25-Pad2)") (pinfunction "VIN") (pintype "input") (tstamp 68415cf7-fd4b-43b5-a7ca-64beadc6cd3e)) (pad "3" smd roundrect (at -2.475 0.635 180) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 310 "Net-(R28-Pad2)") (pinfunction "HPSense") (pintype "input") (tstamp 1358ae0b-dafc-4447-827b-e243942998f8)) + (net 300 "Net-(R28-Pad2)") (pinfunction "HPSense") (pintype "input") (tstamp 1358ae0b-dafc-4447-827b-e243942998f8)) (pad "4" smd roundrect (at -2.475 1.905 180) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 245 "/Baseband/SPKR_VOL") (pinfunction "Vol/SDn") (pintype "input") (tstamp 1486ce01-23a6-4447-8b15-3a8b7415607c)) + (net 238 "/Baseband/SPKR_VOL") (pinfunction "Vol/SDn") (pintype "input") (tstamp 1486ce01-23a6-4447-8b15-3a8b7415607c)) (pad "5" smd roundrect (at 2.475 1.905 180) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 44 "Net-(C42-Pad1)") (pinfunction "VO1") (pintype "output") (tstamp 54bc5938-5003-4cf2-bd2d-f45ad1c7b557)) (pad "6" smd roundrect (at 2.475 0.635 180) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) @@ -5049,7 +4887,7 @@ (pad "7" smd roundrect (at 2.475 -0.635 180) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 39 "Net-(C37-Pad1)") (pinfunction "BYPASS") (pintype "passive") (tstamp d7cc272a-65e3-48fa-8bfd-9d79622ee99d)) (pad "8" smd roundrect (at 2.475 -1.905 180) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 255 "Net-(J22-Pad2)") (pinfunction "VO2") (pintype "output") (tstamp 82cbb61c-3f15-46f6-9364-98b2ca4169b2)) + (net 246 "Net-(J22-Pad2)") (pinfunction "VO2") (pintype "output") (tstamp 82cbb61c-3f15-46f6-9364-98b2ca4169b2)) (model "${KICAD6_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -5107,9 +4945,9 @@ (pad "1" thru_hole circle (at 6.5 0 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "1") (pintype "passive") (tstamp a4f2c568-d826-4f41-93d6-c51a45bc8cc9)) (pad "2" thru_hole circle (at 6.5 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) - (net 331 "/Control on separate board/BTN3") (pinfunction "2") (pintype "passive") (tstamp 3a05672c-22da-4bf8-9c56-2a7eaccc8615)) + (net 320 "/Control on separate board/BTN3") (pinfunction "2") (pintype "passive") (tstamp 3a05672c-22da-4bf8-9c56-2a7eaccc8615)) (pad "2" thru_hole circle (at 0 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) - (net 331 "/Control on separate board/BTN3") (pinfunction "2") (pintype "passive") (tstamp 6b04483d-b447-42d7-a8b4-94b61b98edb9)) + (net 320 "/Control on separate board/BTN3") (pinfunction "2") (pintype "passive") (tstamp 6b04483d-b447-42d7-a8b4-94b61b98edb9)) (model "${KICAD6_3DMODEL_DIR}/Button_Switch_THT.3dshapes/SW_PUSH_6mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -5119,7 +4957,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 2bc16cff-5d48-47eb-aa66-3391e95eb346) - (at 108.0575 26.162 90) + (at 110.8515 25.4 90) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -5163,7 +5001,7 @@ (footprint "mpb:two_2mm_pads" (layer "F.Cu") (tedit 5FB8F550) (tstamp 2c6a2595-2a50-4131-9f91-b9b112699b73) - (at 111.325 235.776) + (at 134.112 179.832 180) (property "Need_order" "0") (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") @@ -5181,10 +5019,10 @@ (fp_line (start -1 0.8) (end -1 -0.8) (layer "F.SilkS") (width 0.15) (tstamp b30db544-1e94-4e27-9374-928f4b011bc1)) (fp_line (start -1 -0.7) (end 1 -0.7) (layer "F.SilkS") (width 0.15) (tstamp d80ef0de-a3ca-43fb-aaca-116be69ecdff)) (fp_line (start -1 -0.8) (end 1 -0.8) (layer "F.SilkS") (width 0.15) (tstamp fb9fe6d7-8c1d-4496-b277-51c4558d1ee1)) - (pad "1" smd rect locked (at 0 -2) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 323 "Net-(J27-Pad1)") (pinfunction "Pin_1") (pintype "passive") (tstamp e968013d-2a21-42cf-978a-7291b395c53d)) - (pad "2" smd rect locked (at 0 2) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 211 "Net-(FB3-Pad1)") (pinfunction "Pin_2") (pintype "passive") (tstamp 74e9b93c-ed22-4e07-a584-a4eb87e3d05c)) + (pad "1" smd rect locked (at 0 -2 180) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") + (net 312 "Net-(J27-Pad1)") (pinfunction "Pin_1") (pintype "passive") (tstamp e968013d-2a21-42cf-978a-7291b395c53d)) + (pad "2" smd rect locked (at 0 2 180) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") + (net 363 "Net-(J27-Pad2)") (pinfunction "Pin_2") (pintype "passive") (tstamp 74e9b93c-ed22-4e07-a584-a4eb87e3d05c)) ) (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") @@ -5302,7 +5140,7 @@ (footprint "Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 2d52f979-281c-4c7a-897d-8b46323dd460) - (at 146.185 214.921) + (at 130.048 181.61 90) (descr "Resistor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -5310,15 +5148,15 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-0000606e4a4e") (attr smd) - (fp_text reference "R144" (at 0 -2.28) (layer "F.SilkS") + (fp_text reference "R144" (at 0 -2.28 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 49b0eea7-4dbc-4079-8e65-b7a99fd3defb) ) - (fp_text value "0.1" (at 0 2.28) (layer "F.Fab") + (fp_text value "0.1" (at 0 2.28 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 17beed4a-2770-4a68-b6f0-a42c78e6de3d) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12))) (tstamp 92429d87-781b-4a16-ae21-fa14b66ff767) ) @@ -5332,10 +5170,10 @@ (fp_line (start 1.6 1.245) (end -1.6 1.245) (layer "F.Fab") (width 0.1) (tstamp 46793aae-95e5-4956-8a9b-fb26fccf9f58)) (fp_line (start -1.6 1.245) (end -1.6 -1.245) (layer "F.Fab") (width 0.1) (tstamp 83624cb1-97d0-40e8-8603-d5c2e1183551)) (fp_line (start 1.6 -1.245) (end 1.6 1.245) (layer "F.Fab") (width 0.1) (tstamp ce7fb0df-30c6-43b4-b48a-7a9d1a85612f)) - (pad "1" smd roundrect (at -1.55 0) (size 1.3 2.65) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.192308) - (net 323 "Net-(J27-Pad1)") (pintype "passive") (tstamp e16a8baa-5b6a-40cc-88d9-9d8bd4795a37)) - (pad "2" smd roundrect (at 1.55 0) (size 1.3 2.65) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.192308) - (net 211 "Net-(FB3-Pad1)") (pintype "passive") (tstamp 167ce0ff-11ed-4c43-8afd-f076ebfe4dad)) + (pad "1" smd roundrect (at -1.55 0 90) (size 1.3 2.65) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.192308) + (net 312 "Net-(J27-Pad1)") (pintype "passive") (tstamp e16a8baa-5b6a-40cc-88d9-9d8bd4795a37)) + (pad "2" smd roundrect (at 1.55 0 90) (size 1.3 2.65) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.192308) + (net 363 "Net-(J27-Pad2)") (pintype "passive") (tstamp 167ce0ff-11ed-4c43-8afd-f076ebfe4dad)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_1210_3225Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -5496,7 +5334,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 2ef69cb0-ff04-4ef9-891b-b5a60efb1388) - (at 134.195 236.261) + (at 136.017 146.431 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -5504,15 +5342,15 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-0000605471fa") (attr smd) - (fp_text reference "R150" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R150" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 9f950526-3b84-4e7e-a415-fee11dfe2857) ) - (fp_text value "0" (at 0 1.43) (layer "F.Fab") + (fp_text value "0" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp fd4ecf17-de46-4379-a9a6-46f43ba9b3ca) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 66cd6d74-0a77-4695-9725-9a6c9c4d76fc) ) @@ -5526,10 +5364,10 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 1b2677b3-19aa-4ebb-91c0-72439cc935ed)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 3f1f74c8-4a55-471b-9db8-3b636674d2c7)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 53820cee-f307-4126-b4fc-1097db42e43a)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 286 "Net-(L40-Pad2)") (pintype "passive") (tstamp 6493563e-886c-48fa-8c06-0836577b956b)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 142 "Net-(C144-Pad2)") (pintype "passive") (tstamp 71170343-29c0-4938-8f62-1f5d6998bcd6)) + (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 277 "Net-(L40-Pad2)") (pintype "passive") (tstamp 6493563e-886c-48fa-8c06-0836577b956b)) + (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 140 "Net-(C144-Pad2)") (pintype "passive") (tstamp 71170343-29c0-4938-8f62-1f5d6998bcd6)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -5537,32 +5375,47 @@ ) ) - (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") - (tedit 56D1B4CB) (tstamp 304b66ac-86a2-4a91-95a4-36dd929da688) - (at 120.475 228.701) - (descr "Mounting Hole 3.2mm, M3, DIN965") - (tags "mounting hole 3.2mm m3 din965") + (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEEE) (tstamp 2ff8acf0-23a4-4135-9ff2-479a831526bc) + (at 106.934 87.376 180) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor handsolder") (property "Need_order" "0") - (property "Sheetfile" "pa_70.kicad_sch") - (property "Sheetname" "PA 70MHz") - (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-00005fc1e1b4") - (attr exclude_from_pos_files) - (fp_text reference "H25" (at 0 -3.8) (layer "F.SilkS") + (property "Sheetfile" "ant_switch.kicad_sch") + (property "Sheetname" "Antenna Switch") + (path "/2eb25ee2-d512-42fe-80f1-00400ed0a45e/8a623977-5088-44ce-af4f-9983a91745ae") + (attr smd) + (fp_text reference "R11" (at 0 -1.43) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) - (tstamp 833c3a42-9506-4e1a-a2e4-0a8245537695) + (tstamp 8b24fd0b-5082-4526-a465-8cb943042e4a) ) - (fp_text value "M3" (at 0 3.8) (layer "F.Fab") + (fp_text value "100k" (at 0 1.43) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) - (tstamp ba9340c0-e5b7-4d6c-801b-c81c2766f899) + (tstamp cd75b243-2f8a-462a-98eb-44a84afce6fa) ) (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 5b785f5e-8615-42ef-b3c0-174f388196d5) + (effects (font (size 0.4 0.4) (thickness 0.06))) + (tstamp 8a4a1154-9e62-424e-a354-8f70ff8497d9) + ) + (fp_line (start -0.254724 -0.5225) (end 0.254724 -0.5225) (layer "F.SilkS") (width 0.12) (tstamp 581bf39a-f1e5-4ebc-8b00-2391bc5d472e)) + (fp_line (start -0.254724 0.5225) (end 0.254724 0.5225) (layer "F.SilkS") (width 0.12) (tstamp 8024a35c-bd95-4e8a-91b8-652ae9e83521)) + (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer "F.CrtYd") (width 0.05) (tstamp 49a30d63-272e-4554-9e66-37e8aa0d9b4f)) + (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp 618d336e-f1cd-40e4-9600-0e3e412e9dfb)) + (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer "F.CrtYd") (width 0.05) (tstamp b4ddb5cb-cf4c-44d5-8b16-2b50d19e2d05)) + (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp cdd9b499-4226-47cf-b560-4dd2a683bfb0)) + (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 610c5df1-f1ef-4702-bc97-78cf120c0917)) + (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 7890b1b2-a4ef-43ae-b4ad-a85029295bc1)) + (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp dbf1cd65-f13d-4550-aa1f-d05eb216bc34)) + (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e7c4e8e2-be8d-4f15-ae23-e51701c0735c)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 247 "+VTX") (pintype "passive") (tstamp b1525b43-ec60-4d5b-b40d-6d143f905892)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 2 "GND") (pintype "passive") (tstamp cd7b0d00-65f9-4a84-8733-94ef0acf3619)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) ) - (fp_circle (center 0 0) (end 2.8 0) (layer "Cmts.User") (width 0.15) (fill none) (tstamp 8413b783-1e44-4808-99c5-e1f44db4fe15)) - (fp_circle (center 0 0) (end 3.05 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp a0f5b7f5-c38a-4b1e-80ff-4d9c3a7eb51c)) - (pad "1" thru_hole circle (at 0 0) (size 5.6 5.6) (drill 3.2) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "1") (pintype "input") (tstamp 7cd58c0a-51b4-490d-ab73-ba1b8773ec09)) ) (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") @@ -5608,6 +5461,67 @@ ) ) + (footprint "Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical" (layer "F.Cu") + (tedit 59FED5CC) (tstamp 3204068d-b018-4de0-9bf3-7ce7d18ad5e5) + (at 115.57 165.085 180) + (descr "Through hole straight pin header, 1x08, 2.54mm pitch, single row") + (tags "Through hole pin header THT 1x08 2.54mm single row") + (property "MPN" "SSW-108-01-G-S") + (property "Need_order" "0") + (property "Sheetfile" "pa_70.kicad_sch") + (property "Sheetname" "PA 70MHz") + (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/2a401374-7981-4abf-bdff-1f3da530621a") + (attr through_hole) + (fp_text reference "J17" (at 0 -2.33) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 47149ac6-21ee-4a82-9629-05607e26197d) + ) + (fp_text value "PA to base" (at 0 20.11) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 63ae697b-b493-4402-b4e4-bd9bc4546f1c) + ) + (fp_text user "${REFERENCE}" (at 0 8.89 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp bf6444be-4300-4b55-8f11-0ca8a9817875) + ) + (fp_line (start 1.33 1.27) (end 1.33 19.11) (layer "F.SilkS") (width 0.12) (tstamp 01369b8e-e982-418b-900c-8cdfed7f3ac4)) + (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer "F.SilkS") (width 0.12) (tstamp 130ee637-768d-4d1e-9045-0a426968311c)) + (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer "F.SilkS") (width 0.12) (tstamp 204c13b8-6633-4e02-ae40-1cb185c55057)) + (fp_line (start -1.33 0) (end -1.33 -1.33) (layer "F.SilkS") (width 0.12) (tstamp 3df943a1-dcb9-472b-aec7-37a4f0249e1e)) + (fp_line (start -1.33 1.27) (end -1.33 19.11) (layer "F.SilkS") (width 0.12) (tstamp 5a2dbbbc-38fa-4d6f-83f6-c20015acbddd)) + (fp_line (start -1.33 19.11) (end 1.33 19.11) (layer "F.SilkS") (width 0.12) (tstamp f8f72974-db09-436f-9d17-fe5bbb8fed3a)) + (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp 0db59807-1a62-42a3-9de1-f51c4c46ddd8)) + (fp_line (start -1.8 -1.8) (end -1.8 19.55) (layer "F.CrtYd") (width 0.05) (tstamp 21fe6bd9-07cc-4b25-b778-3bca88d78efb)) + (fp_line (start 1.8 19.55) (end 1.8 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp 7d13516e-4ec3-4d42-89d4-67828fa317a4)) + (fp_line (start -1.8 19.55) (end 1.8 19.55) (layer "F.CrtYd") (width 0.05) (tstamp 896acd25-5481-4ec9-8f50-eb5d5673e00f)) + (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp 169309b9-07a5-4f08-89b9-ffc71f089ef1)) + (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp 8361fafa-357d-4531-8783-20d1add502b8)) + (fp_line (start -1.27 19.05) (end -1.27 -0.635) (layer "F.Fab") (width 0.1) (tstamp 963fa5ec-21c0-4225-a65a-52f71c1c9f42)) + (fp_line (start 1.27 19.05) (end -1.27 19.05) (layer "F.Fab") (width 0.1) (tstamp 9bde5f2a-5da1-4fa6-817e-1dc1403bf67c)) + (fp_line (start 1.27 -1.27) (end 1.27 19.05) (layer "F.Fab") (width 0.1) (tstamp e718058c-c9f0-4b17-b52b-e43eb8917fc9)) + (pad "1" thru_hole rect (at 0 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 366 "Net-(J17-Pad1)") (pinfunction "Pin_1") (pintype "passive") (tstamp 96ba4440-0b01-409f-8f2f-ab58a4a6f7a1)) + (pad "2" thru_hole oval (at 0 2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 366 "Net-(J17-Pad1)") (pinfunction "Pin_2") (pintype "passive") (tstamp f3bb31d3-7b71-4588-8580-9b2d45f15378)) + (pad "3" thru_hole oval (at 0 5.08 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 366 "Net-(J17-Pad1)") (pinfunction "Pin_3") (pintype "passive") (tstamp 4310cdb0-2590-440a-8676-7ceb5259c9c8)) + (pad "4" thru_hole oval (at 0 7.62 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 2 "GND") (pinfunction "Pin_4") (pintype "passive") (tstamp 0c24387a-feed-49dd-b60a-96d4ef0c469b)) + (pad "5" thru_hole oval (at 0 10.16 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 133 "Net-(C136-Pad2)") (pinfunction "Pin_5") (pintype "passive") (tstamp 5c6ddaad-98a0-44cc-a00e-e001afa3ac27)) + (pad "6" thru_hole oval (at 0 12.7 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 2 "GND") (pinfunction "Pin_6") (pintype "passive") (tstamp e1e64ef5-79d8-4474-a86f-2dda4a81f6db)) + (pad "7" thru_hole oval (at 0 15.24 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 2 "GND") (pinfunction "Pin_7") (pintype "passive") (tstamp 376005e3-da30-493b-8492-336c923dc8ab)) + (pad "8" thru_hole oval (at 0 17.78 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 147 "/PA 70MHz/VG_5V") (pinfunction "Pin_8") (pintype "passive") (tstamp 32f1b364-42fe-4705-ad36-49dc84b63fc3)) + (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x08_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 3217bb33-45fa-4687-be6a-93bbfe929279) (at 69.342 82.804 90) @@ -5742,7 +5656,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp 34f1b470-7380-4475-94a4-4a7409ca7989) - (at 113.325 228.701) + (at 130.302 153.67 -90) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -5750,21 +5664,21 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-00005fc74e90") (attr exclude_from_pos_files) - (fp_text reference "H23" (at 0 -3.8) (layer "F.SilkS") + (fp_text reference "H23" (at 0 -3.8 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp e7e3da31-4a07-4185-8e0e-e7bfc22f1a82) ) - (fp_text value "M3" (at 0 3.8) (layer "F.Fab") + (fp_text value "M3" (at 0 3.8 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp e803c0ff-384e-417a-9c60-132d1cb01ad7) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp cf263e4b-0004-46ed-ab95-9a82e5a9edd3) ) (fp_circle (center 0 0) (end 2.8 0) (layer "Cmts.User") (width 0.15) (fill none) (tstamp 2e4343d8-c44e-4bcc-aa77-c3cc51170a70)) (fp_circle (center 0 0) (end 3.05 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp df9a5691-cb4a-4e8f-9ef4-7726c9c818f0)) - (pad "1" thru_hole circle (at 0 0) (size 5.6 5.6) (drill 3.2) (layers *.Cu *.Mask) + (pad "1" thru_hole circle (at 0 0 270) (size 5.6 5.6) (drill 3.2) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "1") (pintype "input") (tstamp f9530d79-174f-48e7-90f1-7c58b2a1c6d8)) ) @@ -5813,7 +5727,7 @@ (pad "1" smd rect (at -1.4 0 90) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") (net 58 "Net-(C50-Pad1)") (pinfunction "K") (pintype "passive") (tstamp e0bc14dc-5fc0-4c2c-aa6e-8c5c6b2b5a49)) (pad "2" smd rect (at 1.4 0 90) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") - (net 173 "Net-(D8-Pad2)") (pinfunction "A") (pintype "passive") (tstamp afb3195d-5758-4d0b-975c-f9a550d414ba)) + (net 167 "Net-(D8-Pad2)") (pinfunction "A") (pintype "passive") (tstamp afb3195d-5758-4d0b-975c-f9a550d414ba)) (model "${KICAD6_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-123F.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -5823,7 +5737,7 @@ (footprint "Inductor_SMD:L_1008_2520Metric" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 354ca958-8613-4907-9ba6-852e2715a96d) - (at 156.675 204.151) + (at 129.032 159.258 90) (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") (tags "inductor") (property "MPN" "") @@ -5831,15 +5745,15 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-00006054d09a") (attr smd) - (fp_text reference "L40" (at 0 -2.05) (layer "F.SilkS") + (fp_text reference "L40" (at 0 -2.05 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 1b69f9fd-26cc-4e82-8851-2df8d67a9a0f) ) - (fp_text value "TBD" (at 0 2.05) (layer "F.Fab") + (fp_text value "TBD" (at 0 2.05 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 714fd7ca-ead3-4786-8b99-1627defd8464) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.62 0.62) (thickness 0.09))) (tstamp 7e373030-b7e7-4c40-9645-ad72372c6b28) ) @@ -5853,10 +5767,10 @@ (fp_line (start 1.25 1) (end -1.25 1) (layer "F.Fab") (width 0.1) (tstamp 366f62dc-5690-45e8-a7d3-62fa4702f8f9)) (fp_line (start 1.25 -1) (end 1.25 1) (layer "F.Fab") (width 0.1) (tstamp 9df5a1f0-f15b-49d8-a87a-3825c943cbdb)) (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp b8518edd-e58d-4286-bad7-74598fe0da9d)) - (pad "1" smd roundrect (at -1.075 0) (size 1.25 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.2) - (net 146 "Net-(C148-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 928fc87f-4570-4f69-89ad-22532cc228ce)) - (pad "2" smd roundrect (at 1.075 0) (size 1.25 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.2) - (net 286 "Net-(L40-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 518171a2-bdd9-42af-9dd8-b19980bd2745)) + (pad "1" smd roundrect (at -1.075 0 90) (size 1.25 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.2) + (net 144 "Net-(C148-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 928fc87f-4570-4f69-89ad-22532cc228ce)) + (pad "2" smd roundrect (at 1.075 0 90) (size 1.25 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.2) + (net 277 "Net-(L40-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 518171a2-bdd9-42af-9dd8-b19980bd2745)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -5976,17 +5890,17 @@ (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_1") (pintype "passive") (tstamp 94b89678-6d4b-45d8-89c5-bf7d51b02d94)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 257 "Net-(J24-Pad2)") (pinfunction "Pin_2") (pintype "passive") (tstamp 0b8de906-4836-48e3-8ad0-81f97a2f4134)) + (net 248 "Net-(J24-Pad2)") (pinfunction "Pin_2") (pintype "passive") (tstamp 0b8de906-4836-48e3-8ad0-81f97a2f4134)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_3") (pintype "passive") (tstamp fa3bd8b5-6357-49ae-ba7a-420dd8a4a612)) (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 258 "unconnected-(J24-Pad4)") (pinfunction "Pin_4") (pintype "passive+no_connect") (tstamp c4898a7d-f9da-482f-ac9b-6515a2af0fe9)) + (net 249 "unconnected-(J24-Pad4)") (pinfunction "Pin_4") (pintype "passive+no_connect") (tstamp c4898a7d-f9da-482f-ac9b-6515a2af0fe9)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 259 "unconnected-(J24-Pad5)") (pinfunction "Pin_5") (pintype "passive+no_connect") (tstamp 1ffc2d2a-7245-4dea-a9ba-ffd51d6a86e3)) + (net 250 "unconnected-(J24-Pad5)") (pinfunction "Pin_5") (pintype "passive+no_connect") (tstamp 1ffc2d2a-7245-4dea-a9ba-ffd51d6a86e3)) (pad "6" thru_hole oval (at 0 12.7) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_6") (pintype "passive") (tstamp 9a97448f-e4ea-4cdf-a756-b462ec1f8217)) (pad "7" thru_hole oval (at 0 15.24) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 260 "Net-(J24-Pad7)") (pinfunction "Pin_7") (pintype "passive") (tstamp 1dfa06db-d761-4a28-9ef1-6a5bd7bcbeac)) + (net 251 "Net-(J24-Pad7)") (pinfunction "Pin_7") (pintype "passive") (tstamp 1dfa06db-d761-4a28-9ef1-6a5bd7bcbeac)) (pad "8" thru_hole oval (at 0 17.78) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_8") (pintype "passive") (tstamp 3cddf91d-28c6-4c9e-944b-730824bdccb3)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x08_P2.54mm_Vertical.wrl" @@ -5998,17 +5912,17 @@ (footprint "mpb:two_2mm_pads" (layer "F.Cu") (tedit 5FB8F550) (tstamp 36262b2b-7105-49d1-97c6-4f1739c78f26) - (at 114.475 235.776) + (at 148.59 162.814 90) (property "Need_order" "0") (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-00005fbe8d8f") (attr through_hole) - (fp_text reference "C153" (at -3 -0.25 90) (layer "F.SilkS") + (fp_text reference "C153" (at -3 -0.25) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp f5f0f45a-f6dd-4a8a-9e33-1371afb3e277) ) - (fp_text value "DNF" (at 0 -0.5) (layer "F.Fab") + (fp_text value "DNF" (at 0 -0.5 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp b7c570d6-183e-499a-9817-440bc6e94dea) ) @@ -6016,15 +5930,15 @@ (fp_line (start -1 -0.8) (end 1 -0.8) (layer "F.SilkS") (width 0.15) (tstamp e09f3429-bef8-4ff0-b9eb-745b8095e8bc)) (fp_line (start 1 -0.8) (end 1 0.8) (layer "F.SilkS") (width 0.15) (tstamp e4f83210-e046-404a-a434-2398d2e8a1a3)) (fp_line (start -1 -0.7) (end 1 -0.7) (layer "F.SilkS") (width 0.15) (tstamp fcd31a79-c34b-4517-8560-741ae55655d4)) - (pad "1" smd rect locked (at 0 -2) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 147 "Net-(C148-Pad2)") (pintype "passive") (tstamp d312a37e-f29f-4225-8b09-31ce7e7c07a9)) - (pad "2" smd rect locked (at 0 2) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 145 "Net-(C147-Pad2)") (pintype "passive") (tstamp a82c234a-4e70-425f-b534-fdea0d874d29)) + (pad "1" smd rect locked (at 0 -2 90) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") + (net 145 "Net-(C148-Pad2)") (pintype "passive") (tstamp d312a37e-f29f-4225-8b09-31ce7e7c07a9)) + (pad "2" smd rect locked (at 0 2 90) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") + (net 143 "Net-(C147-Pad2)") (pintype "passive") (tstamp a82c234a-4e70-425f-b534-fdea0d874d29)) ) (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 37808d06-ee0e-4f6b-a0f7-989d25042de4) - (at 225.171 53.975) + (at 226.06 53.975) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -6066,6 +5980,50 @@ ) ) + (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEEF) (tstamp 3802d0fc-1b1b-4d78-a3e9-f8e6fd921909) + (at 127 81.534 90) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor handsolder") + (property "MPN" "VJ0805A103KXJTBC") + (property "Need_order" "0") + (property "Sheetfile" "ant_switch.kicad_sch") + (property "Sheetname" "Antenna Switch") + (path "/2eb25ee2-d512-42fe-80f1-00400ed0a45e/c3f45427-299e-417f-bff2-861c449ee20d") + (attr smd) + (fp_text reference "C116" (at 0 -1.68 90) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp a4e7c9a3-3ab6-4e43-a275-ec61f16cf747) + ) + (fp_text value "10nF" (at 0 1.68 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 41758693-b716-42c1-a5f1-c12b18b048fc) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp f81fc7d5-6753-44bd-87fa-5e3f613d2cb5) + ) + (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer "F.SilkS") (width 0.12) (tstamp 5844a8b3-3a28-4619-bae8-4bc769157854)) + (fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer "F.SilkS") (width 0.12) (tstamp c342df1b-cfe0-47e0-979c-3c4f8aa8af7f)) + (fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer "F.CrtYd") (width 0.05) (tstamp 066428ab-e3c5-4aee-88e5-05513d110905)) + (fp_line (start 1.88 0.98) (end -1.88 0.98) (layer "F.CrtYd") (width 0.05) (tstamp 38a21e3f-32f3-4d73-8a7f-7233133e3363)) + (fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer "F.CrtYd") (width 0.05) (tstamp d1dd5f96-7350-4205-8a4c-690ef4fe829b)) + (fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer "F.CrtYd") (width 0.05) (tstamp de605e50-fdc6-43c9-a08b-b378e62dd7ac)) + (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 1268e370-76bf-4cb4-95fc-66b3e3da3ded)) + (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp 73db8a9e-900a-4690-bfd6-e4e0f80dc3c9)) + (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp a129c977-8fbc-4691-9ce6-a2d882bdd49c)) + (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp ced2a8f4-b5fe-456e-b132-600efc376f10)) + (pad "1" smd roundrect (at -1.0375 0 90) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 161 "Net-(C116-Pad1)") (pintype "passive") (tstamp 83bfa0be-da12-4df1-a33d-a9eaff9ed183)) + (pad "2" smd roundrect (at 1.0375 0 90) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 19 "/Antenna Switch/TX") (pintype "passive") (tstamp 69a75c15-a11d-428c-9d00-508033cd9033)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "mpb:MABA 009488 61HWCA" (layer "F.Cu") (tedit 5C321D62) (tstamp 386851d2-d420-489b-87d2-9c69151d8512) (at 53.863 180.015 180) @@ -6102,11 +6060,11 @@ (pad "1" smd rect (at -1.59 -1.27 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "PR1") (pintype "passive") (clearance 0.2) (tstamp fb0c61e7-fadc-41f2-ab60-c37512d05f99)) (pad "2" smd rect (at -1.59 0 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 343 "unconnected-(T3-Pad2)") (pinfunction "PM") (pintype "passive+no_connect") (clearance 0.2) (tstamp 942279af-d63a-46d9-af5d-69fbabf1b73a)) + (net 332 "unconnected-(T3-Pad2)") (pinfunction "PM") (pintype "passive+no_connect") (clearance 0.2) (tstamp 942279af-d63a-46d9-af5d-69fbabf1b73a)) (pad "3" smd rect (at -1.59 1.27 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 66 "Net-(C56-Pad2)") (pinfunction "PR2") (pintype "passive") (clearance 0.2) (tstamp 648bd02a-a18a-4d8b-91fd-beb3a91fa996)) (pad "4" smd rect (at 1.59 1.27 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 260 "Net-(J24-Pad7)") (pinfunction "S1") (pintype "passive") (clearance 0.2) (tstamp 842ce2e8-7ddc-40cc-a5fa-6860a6282931)) + (net 251 "Net-(J24-Pad7)") (pinfunction "S1") (pintype "passive") (clearance 0.2) (tstamp 842ce2e8-7ddc-40cc-a5fa-6860a6282931)) (pad "5" smd rect (at 1.59 0 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "S2") (pintype "passive") (clearance 0.2) (tstamp d669e6b4-62e0-44bb-ba1e-d50a48d215e0)) (pad "6" smd rect (at 1.59 -1.27 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") @@ -6199,11 +6157,11 @@ (fp_line (start 0.675 -1.1) (end 0.675 1.1) (layer "F.Fab") (width 0.1) (tstamp f6a1c101-37da-4d09-ab4b-6fb01800fc30)) (fp_line (start 0.675 1.1) (end -0.675 1.1) (layer "F.Fab") (width 0.1) (tstamp f8dfb567-8b2d-4ec4-8d66-897cd7dee0f5)) (pad "1" smd rect (at -1.33 -0.65 180) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 182 "Net-(D16-Pad1)") (pintype "passive") (tstamp aacfd2b7-0311-41ac-a8d4-7b6d617a5203)) + (net 176 "Net-(D16-Pad1)") (pintype "passive") (tstamp aacfd2b7-0311-41ac-a8d4-7b6d617a5203)) (pad "2" smd rect (at -1.33 0.65 180) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 183 "Net-(D16-Pad2)") (pintype "passive") (tstamp 24c3229a-362c-433d-a5e8-e0947125135e)) + (net 177 "Net-(D16-Pad2)") (pintype "passive") (tstamp 24c3229a-362c-433d-a5e8-e0947125135e)) (pad "3" smd rect (at 1.33 0 180) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 184 "Net-(D16-Pad3)") (pintype "passive") (tstamp 4cb09ad7-8a7f-4f1c-9c64-60ed92098169)) + (net 178 "Net-(D16-Pad3)") (pintype "passive") (tstamp 4cb09ad7-8a7f-4f1c-9c64-60ed92098169)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-323_SC-70.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -6246,7 +6204,7 @@ (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 58 "Net-(C50-Pad1)") (pintype "passive") (tstamp 5b8ad64d-53cd-43eb-b775-69841133cd57)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 292 "Net-(Q7-Pad1)") (pintype "passive") (tstamp 097dffa4-e0a2-40d6-9b87-2209d6833faf)) + (net 282 "Net-(Q7-Pad1)") (pintype "passive") (tstamp 097dffa4-e0a2-40d6-9b87-2209d6833faf)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -6256,7 +6214,7 @@ (footprint "Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 3a4854e3-b14e-4848-a5ad-875b7014c570) - (at 102.362 32.258) + (at 105.156 31.496) (descr "Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2BASR18G00L") @@ -6300,7 +6258,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 3ace8950-97a7-4418-8578-bff32b1e4c00) - (at 225.171 37.719) + (at 226.06 37.719) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -6388,7 +6346,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 3beb3936-deaf-4a7c-9064-062a0334a5ac) - (at 110.236 53.848 90) + (at 103.782 53.848 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -6419,7 +6377,7 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp c976c7bb-434d-4365-a3d4-46b4a7205b84)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp fdf526c6-8011-4725-89e0-b2152e3b8145)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 281 "Net-(L19-Pad1)") (pintype "passive") (tstamp fc913a49-2a86-4d67-ae93-4487a3c88d18)) + (net 272 "Net-(L19-Pad1)") (pintype "passive") (tstamp fc913a49-2a86-4d67-ae93-4487a3c88d18)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 9137a13c-c8fd-4251-b014-54e5eab196f1)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -6518,7 +6476,7 @@ (footprint "Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 3c82206c-1d92-49a4-a10d-4a6d981822be) - (at 134.205 226.261) + (at 132.334 167.894) (descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "TAJA106K016RNJ") @@ -6550,7 +6508,7 @@ (fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer "F.Fab") (width 0.1) (tstamp d08b4e50-9cec-4e6a-be61-1970d20e21bf)) (fp_line (start 1.6 1.25) (end -1.6 1.25) (layer "F.Fab") (width 0.1) (tstamp f4fce41c-7eb8-424c-a2a8-f1756a1281a5)) (pad "1" smd roundrect (at -1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) - (net 148 "Net-(C149-Pad1)") (pintype "passive") (tstamp d1a2c611-559c-4454-99fc-f5925bacaea4)) + (net 361 "/PA 70MHz/V_{DD}") (pintype "passive") (tstamp d1a2c611-559c-4454-99fc-f5925bacaea4)) (pad "2" smd roundrect (at 1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) (net 2 "GND") (pintype "passive") (tstamp b3697da5-47d1-480f-b417-caa531caa0c5)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" @@ -6562,7 +6520,7 @@ (footprint "mpb:large_inductor" (layer "F.Cu") (tedit 5FC0D6CB) (tstamp 3c90a45e-4649-477b-8924-e1190a0faf2b) - (at 98.325 216.626) + (at 114.3 52.65 180) (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/91c14368-28f3-48f6-97b7-61b3fe76f76b") @@ -6581,19 +6539,19 @@ (fp_arc (start -1.4 3) (mid -2.4 2) (end -1.4 1) (layer "F.SilkS") (width 0.15) (tstamp 4ba97b54-cd04-48b0-b2b6-96049aef811e)) (fp_arc (start -1.4 1) (mid -2.4 0) (end -1.4 -1) (layer "F.SilkS") (width 0.15) (tstamp 5152b3f9-4a2e-44d8-8267-aba4892567c4)) (fp_arc (start -1.4 -1) (mid -2.4 -2) (end -1.4 -3) (layer "F.SilkS") (width 0.15) (tstamp b6bf7d8d-4f17-45da-9c22-96d373326ca3)) - (pad "1" smd rect locked (at 0 -4.5) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") - (net 151 "Net-(C155-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 4122f1d8-0b2b-4c00-bf45-8fffc5ce98ed)) - (pad "1" smd rect locked (at 0 -6) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 151 "Net-(C155-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 79262007-7ccb-4266-820d-df0554afa3a8)) - (pad "2" smd rect locked (at 0 6) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 152 "Net-(C156-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 478b4e25-984a-47d9-86a3-e2034cdf6150)) - (pad "2" smd rect locked (at 0 4.5) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") - (net 152 "Net-(C156-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 64204cb4-37f0-404e-a0de-ba8ff3739ad5)) + (pad "1" smd rect locked (at 0 -4.5 180) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") + (net 148 "Net-(C155-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 4122f1d8-0b2b-4c00-bf45-8fffc5ce98ed)) + (pad "1" smd rect locked (at 0 -6 180) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 148 "Net-(C155-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 79262007-7ccb-4266-820d-df0554afa3a8)) + (pad "2" smd rect locked (at 0 6 180) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 149 "Net-(C156-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 478b4e25-984a-47d9-86a3-e2034cdf6150)) + (pad "2" smd rect locked (at 0 4.5 180) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") + (net 149 "Net-(C156-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 64204cb4-37f0-404e-a0de-ba8ff3739ad5)) ) (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 3df37944-2892-45dd-8ed9-09e7c45cea55) - (at 177.635 196.381) + (at 146.558 142.748 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -6623,10 +6581,10 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 2cf7503f-b33a-44f1-b825-0e35ad46cb4c)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 6367daf6-206b-4bb3-a708-ba457e9e3ea6)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp d870e3b4-2d75-4fbf-af46-40c2288c20e5)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 139 "Net-(C143-Pad1)") (pintype "passive") (tstamp c975f6f1-deb8-4542-abf9-cac1bcee6648)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 138 "Net-(C140-Pad2)") (pintype "passive") (tstamp 1ff7d048-c385-49da-9319-489edfa4a469)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 137 "Net-(C143-Pad1)") (pintype "passive") (tstamp c975f6f1-deb8-4542-abf9-cac1bcee6648)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 136 "Net-(C140-Pad2)") (pintype "passive") (tstamp 1ff7d048-c385-49da-9319-489edfa4a469)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -6670,7 +6628,7 @@ (pad "1" smd roundrect (at -1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 105 "Net-(C94-Pad2)") (pinfunction "1") (pintype "passive") (tstamp a95e5244-2e84-4c51-8d6d-1849885264e6)) (pad "2" smd roundrect (at 1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 358 "Net-(L22-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 745679ea-d33e-4170-9620-3e9a22f75b19)) + (net 346 "Net-(L22-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 745679ea-d33e-4170-9620-3e9a22f75b19)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -6846,7 +6804,7 @@ (fp_line (start -0.325 -1.45) (end 0.65 -1.45) (layer "F.Fab") (width 0.1) (tstamp 8bf4ea91-55e5-469b-a417-6d4410d777dd)) (fp_line (start 0.65 -1.45) (end 0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp 9c158c16-53d5-4468-a992-51edfa59f803)) (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 294 "Net-(Q10-Pad2)") (pinfunction "B") (pintype "input") (tstamp fc51dcda-9924-41c4-99fd-55384cf14c8e)) + (net 284 "Net-(Q10-Pad2)") (pinfunction "B") (pintype "input") (tstamp fc51dcda-9924-41c4-99fd-55384cf14c8e)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 65 "Net-(C55-Pad2)") (pinfunction "E") (pintype "passive") (tstamp 4e196bdb-160b-4d34-ba36-81176a1afefd)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) @@ -6860,7 +6818,7 @@ (footprint "RF_Shielding:Laird_Technologies_BMI-S-209-F_29.36x18.50mm" (layer "F.Cu") (tedit 5B85E9E3) (tstamp 3f4261fb-6e9b-46a2-b96f-975a9ea2c91d) - (at 230.251 76.835 -90) + (at 172.72 84.456 -90) (descr "Laird Technologies BMI-S-209-F Shielding Cabinet Two Piece SMD 29.36x18.50mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf)") (tags "Shielding Cabinet") (property "MPN" "BMI-S-209-F") @@ -6952,6 +6910,64 @@ ) ) + (footprint "mpb:BNC_Molex_73100-0105_Horizontal" (layer "F.Cu") + (tedit 60AFC043) (tstamp 3ff35d4a-2e79-4fbd-8fa0-2eb71d41e761) + (at 142.9783 91.948 -90) + (descr "BNC RF Interface, PCB mount 4 pin, Right Angle, Bayonet, 50Ohm, 4GHz, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1478035%7FB1%7Fpdf%7FEnglish%7FENG_CD_1478035_B1.pdf%7F1-1478035-0") + (tags "BNC RF interface bayonet 50ohm") + (property "Need_order" "") + (property "Sheetfile" "kicad-dart-70.kicad_sch") + (property "Sheetname" "") + (path "/7f78ab84-fe5d-45cd-a3ec-479828abed0d") + (attr through_hole) + (fp_text reference "J21" (at 5.8 10.5) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp e913e82f-150f-4f0b-9e2f-7f8220cfcceb) + ) + (fp_text value "VHF" (at 0 15.3 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp ab0bbd3b-c673-45db-ae1c-6852fd3de7f0) + ) + (fp_text user "${REFERENCE}" (at 0 5.5 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 999af188-6152-4380-9638-9247ad777f30) + ) + (fp_line (start 2.825 0) (end -2.825 0) (layer "F.SilkS") (width 0.12) (tstamp 0cf4ff34-abfe-48b1-904d-534d6a3407aa)) + (fp_line (start 0 0.2) (end 0.5 0.9) (layer "F.SilkS") (width 0.12) (tstamp 1933a1b0-d6aa-4afb-b23f-8ec758689a79)) + (fp_line (start -4.6 10.5) (end -4.6 6.575) (layer "F.SilkS") (width 0.12) (tstamp 1c8accbd-d4da-4c61-b09a-62c1ce2ac38a)) + (fp_line (start 4.6 10.5) (end 4.6 6.575) (layer "F.SilkS") (width 0.12) (tstamp 3929f31e-a438-4e0d-be68-cf1e6ce1190a)) + (fp_line (start -4.7 0) (end -4.7 2.3) (layer "F.SilkS") (width 0.12) (tstamp 3eb579bd-c617-483a-ae00-c7abe8d9eab3)) + (fp_line (start -4.6 10.5) (end 4.6 10.5) (layer "F.SilkS") (width 0.12) (tstamp 9861b322-8734-4fc1-b76c-5324ff68d4bd)) + (fp_line (start 4.6 0) (end 4.6 2.3) (layer "F.SilkS") (width 0.12) (tstamp a3d3273e-8ca4-436e-8f46-eaf217b51c7b)) + (fp_line (start 0 0.2) (end -0.5 0.9) (layer "F.SilkS") (width 0.12) (tstamp e7a3bef1-b789-4e59-8a7c-9694a39dd861)) + (fp_line (start -7.53 13.03) (end -7.53 -11.9) (layer "F.CrtYd") (width 0.05) (tstamp 4b47fe30-681f-4b6b-8a07-ca0f47bc5477)) + (fp_line (start 7.53 13.03) (end -7.53 13.03) (layer "F.CrtYd") (width 0.05) (tstamp 595811aa-cb4d-4bdb-8069-967d3bb190f4)) + (fp_line (start -7.53 -11.9) (end 7.53 -11.9) (layer "F.CrtYd") (width 0.05) (tstamp 5e21996c-8ea7-45ee-b168-d2d60f600be5)) + (fp_line (start 7.53 -11.9) (end 7.53 13.03) (layer "F.CrtYd") (width 0.05) (tstamp b46a50e0-5d55-4161-acc5-e30ef5ea3f19)) + (fp_line (start 4.8 0) (end 4.8 -11.4) (layer "F.Fab") (width 0.1) (tstamp 072260d4-4225-41e3-bc7a-0b66e3f40b5f)) + (fp_line (start -4.8 0) (end 4.8 0) (layer "F.Fab") (width 0.1) (tstamp 13357fb8-6fb7-43fe-9595-29390e104532)) + (fp_line (start 4.8 -11.4) (end -4.8 -11.4) (layer "F.Fab") (width 0.1) (tstamp 2d5aa109-9763-413a-86d2-d2be6bfaced6)) + (fp_line (start 4.8 0) (end 4.8 9.9) (layer "F.Fab") (width 0.1) (tstamp 394ff026-3f3b-497c-b774-56d9a981e71d)) + (fp_line (start 0.7 9.9) (end 0.7 10.9) (layer "F.Fab") (width 0.1) (tstamp 72a34102-a376-4e1a-b98a-7216836029fe)) + (fp_line (start -0.8 9.9) (end -0.8 10.9) (layer "F.Fab") (width 0.1) (tstamp 7a57b228-9fe7-4a60-b938-35370a7811d6)) + (fp_line (start -4.8 0) (end -4.8 -11.4) (layer "F.Fab") (width 0.1) (tstamp a96c2522-9c90-437e-b868-2a732b349331)) + (fp_line (start 0.7 10.9) (end -0.8 10.9) (layer "F.Fab") (width 0.1) (tstamp b399967f-24af-4820-b698-0e49b38dd48c)) + (fp_line (start -4.8 9.9) (end -4.8 0) (layer "F.Fab") (width 0.1) (tstamp db547561-bcc8-4524-ac79-5d3ebc228a56)) + (fp_line (start 4.8 9.9) (end -4.8 9.9) (layer "F.Fab") (width 0.1) (tstamp faf75f3f-347a-4722-9cd7-50d86641da37)) + (fp_circle (center 0 -7.2) (end 1 -7.2) (layer "F.Fab") (width 0.1) (fill none) (tstamp ed05e232-0e2c-4e3d-bbb6-4a25234a1ea8)) + (pad "1" thru_hole circle (at 0 12.4 270) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask) + (net 354 "/Antenna Switch/ANT") (pinfunction "In") (pintype "passive") (tstamp 0e81f91a-2f31-42f5-8b5a-7ccfaebac24c)) + (pad "2" thru_hole circle (at 3.8 4.6 270) (size 4 4) (drill 1.8) (layers *.Cu *.Mask) + (net 2 "GND") (pinfunction "Ext") (pintype "passive") (tstamp 2775aab6-1992-4c68-87c7-af45b1feede4)) + (pad "2" thru_hole circle (at -3.8 4.6 270) (size 4 4) (drill 1.8) (layers *.Cu *.Mask) + (net 2 "GND") (pinfunction "Ext") (pintype "passive") (tstamp 2f4494b4-1e99-4936-b1a4-cd3f65359491)) + (model "${KICAD6_3DMODEL_DIR}/Connector_Coaxial.3dshapes/BNC_TEConnectivity_1478035_Horizontal.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 4016ef4f-19d5-4c7d-aea8-112e797148bd) (at 231.902 84.709 90) @@ -7213,9 +7229,9 @@ (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 71 "Net-(C61-Pad1)") (pinfunction "B") (pintype "input") (tstamp fa17c8fe-62f5-43f4-ab6c-5e3024b88483)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 298 "Net-(Q14-Pad2)") (pinfunction "E") (pintype "passive") (tstamp f5d77ec3-450f-4ea6-8583-7c9c3f8798bc)) + (net 288 "Net-(Q14-Pad2)") (pinfunction "E") (pintype "passive") (tstamp f5d77ec3-450f-4ea6-8583-7c9c3f8798bc)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 299 "Net-(Q14-Pad3)") (pinfunction "C") (pintype "passive") (tstamp 0b5c854d-e947-4ca4-b9e0-ff997c7af866)) + (net 289 "Net-(Q14-Pad3)") (pinfunction "C") (pintype "passive") (tstamp 0b5c854d-e947-4ca4-b9e0-ff997c7af866)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -7275,7 +7291,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 4322298b-10b2-40f0-ae6f-1d1111d6966a) - (at 225.171 29.591) + (at 226.06 29.591) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -7319,7 +7335,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 4333ba03-04d4-4c72-bc59-28dc1d264e60) - (at 173.99 89.408 -90) + (at 175.006 90.17 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -7349,9 +7365,9 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp c2c55c89-c438-4dc5-a1f3-50858ceb4261)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp cd370092-6a94-4fa0-ace3-07ff3b4f46ed)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp fc7370ee-ee7c-4ff1-988e-14182d71ad87)) - (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 320 "Net-(R111-Pad2)") (pintype "passive") (tstamp 8d83d520-d6b4-48cb-a165-3ecf15034d7d)) - (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 310 "Net-(R111-Pad2)") (pintype "passive") (tstamp 8d83d520-d6b4-48cb-a165-3ecf15034d7d)) + (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 111 "Net-(C104-Pad2)") (pintype "passive") (tstamp d5a38dbf-66b1-47b8-9c4d-2102e57c1eed)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) @@ -7362,7 +7378,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 44413a81-3c01-4dd7-8a46-91ba0aa51085) - (at 102.362 36.068 180) + (at 105.156 35.306 180) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0603A122GXJCW1BC") @@ -7439,7 +7455,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 73 "Net-(C63-Pad2)") (pintype "passive") (tstamp ab52757b-0f90-433b-90d7-cf2c933d5770)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 299 "Net-(Q14-Pad3)") (pintype "passive") (tstamp ff76232f-6d56-43d9-a4b6-7374ba0ba07f)) + (net 289 "Net-(Q14-Pad3)") (pintype "passive") (tstamp ff76232f-6d56-43d9-a4b6-7374ba0ba07f)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -7481,7 +7497,7 @@ (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 867d40c9-f798-47e9-a085-a991a70f5df1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 897e0b4d-b2cb-4e6f-8b23-f355dcc4dac0)) (pad "1" smd roundrect (at -0.8625 0 270) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 162 "Net-(C172-Pad1)") (pintype "passive") (tstamp 2f025d1b-4644-476a-a901-72bad6a94bf5)) + (net 156 "Net-(C172-Pad1)") (pintype "passive") (tstamp 2f025d1b-4644-476a-a901-72bad6a94bf5)) (pad "2" smd roundrect (at 0.8625 0 270) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 21e1d785-d327-4047-95bf-ae55899fe87e)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" @@ -7524,9 +7540,9 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp b2166ae6-1565-4d73-ad0c-a1370504a499)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp efe54433-2580-48c3-91d6-fb717af26585)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp bcf15b6b-8667-4798-974b-afe15862510b)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp bcf15b6b-8667-4798-974b-afe15862510b)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 234 "/Control on separate board/SCL") (pintype "passive") (tstamp f9a6972d-c936-42fb-aba2-cad40287eb0a)) + (net 227 "/Control on separate board/SCL") (pintype "passive") (tstamp f9a6972d-c936-42fb-aba2-cad40287eb0a)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -7536,7 +7552,7 @@ (footprint "mpb:large_inductor" (layer "F.Cu") (tedit 5FC0D6CB) (tstamp 47d303e3-0266-45cc-8f18-1c7692aa8fb1) - (at 103.795 216.626) + (at 130.556 69.246) (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/313ae445-5f38-4224-861e-dfe728f8c561") @@ -7556,18 +7572,18 @@ (fp_arc (start -1.4 3) (mid -2.4 2) (end -1.4 1) (layer "F.SilkS") (width 0.15) (tstamp 8d8ce9d0-c7f4-4dda-95a8-6a9d44c7c4b5)) (fp_arc (start -1.4 1) (mid -2.4 0) (end -1.4 -1) (layer "F.SilkS") (width 0.15) (tstamp b9dd8a44-1c78-423f-9968-bf8f9886a340)) (pad "1" smd rect locked (at 0 -6) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 153 "Net-(C159-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 5a13305a-df2a-4bf5-b0fb-7f096a40ca4e)) + (net 150 "Net-(C159-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 5a13305a-df2a-4bf5-b0fb-7f096a40ca4e)) (pad "1" smd rect locked (at 0 -4.5) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") - (net 153 "Net-(C159-Pad2)") (pinfunction "1") (pintype "passive") (tstamp f0478c67-1dc0-4c0a-8cb8-00438d094dda)) + (net 150 "Net-(C159-Pad2)") (pinfunction "1") (pintype "passive") (tstamp f0478c67-1dc0-4c0a-8cb8-00438d094dda)) (pad "2" smd rect locked (at 0 4.5) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") - (net 155 "Net-(C162-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 306256b6-5e42-495e-9be3-b5bd6ab33927)) + (net 19 "/Antenna Switch/TX") (pinfunction "2") (pintype "passive") (tstamp 306256b6-5e42-495e-9be3-b5bd6ab33927)) (pad "2" smd rect locked (at 0 6) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 155 "Net-(C162-Pad2)") (pinfunction "2") (pintype "passive") (tstamp b6ef19ab-93cb-4a1e-9209-bb43fb7f0ce4)) + (net 19 "/Antenna Switch/TX") (pinfunction "2") (pintype "passive") (tstamp b6ef19ab-93cb-4a1e-9209-bb43fb7f0ce4)) ) (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 482f5c09-bf83-4136-bb12-ef85a6c69d6f) - (at 149.005 220.791) + (at 132.08 140.462 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -7597,10 +7613,10 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 4f4f0706-d713-47d4-99fe-eb2e89207d60)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 55bf8fce-27a9-43a9-b4ef-6c3a4746ce56)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp c810ae2d-71d0-49ba-a9bc-ccd2d6092d79)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 324 "Net-(R157-Pad1)") (pintype "passive") (tstamp 028bfe04-8f80-4e34-805c-fea7fe7de0f8)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 136 "VGG1") (pintype "passive") (tstamp e282ee04-c20a-48f2-8e6d-5d3dcb3b08f3)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 313 "Net-(R157-Pad1)") (pintype "passive") (tstamp 028bfe04-8f80-4e34-805c-fea7fe7de0f8)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 141 "VGG2") (pintype "passive") (tstamp e282ee04-c20a-48f2-8e6d-5d3dcb3b08f3)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -7608,109 +7624,9 @@ ) ) - (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") - (tedit 56D1B4CB) (tstamp 48b7b194-6dee-4d02-b186-6bb42fabb842) - (at 137.414 80.01) - (descr "Mounting Hole 3.2mm, M3, DIN965") - (tags "mounting hole 3.2mm m3 din965") - (property "Need_order" "0") - (property "Sheetfile" "kicad-dart-70.kicad_sch") - (property "Sheetname" "") - (path "/c3a6835d-bd2b-4eed-824e-3ec7880e07ff") - (attr exclude_from_pos_files) - (fp_text reference "H37" (at 0 -3.8) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp c4254246-43c0-434f-aeb0-4a3e509ad6b3) - ) - (fp_text value "M3" (at 0 3.8) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 5c01074b-fdfc-4270-95e2-53a57a7ad482) - ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 7b6e97e1-0a68-471f-ab86-2ac3177b41f8) - ) - (fp_circle (center 0 0) (end 2.8 0) (layer "Cmts.User") (width 0.15) (fill none) (tstamp 1bd86272-7ff4-4b44-a9c7-4dc5b0f4097c)) - (fp_circle (center 0 0) (end 3.05 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp 47e6c072-2174-4ee4-a8e4-7592144a1ceb)) - (pad "1" thru_hole circle (at 0 0) (size 5.6 5.6) (drill 3.2) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "1") (pintype "input") (tstamp aba4fcd0-e007-45c3-82f1-297cf98cf140)) - ) - - (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") - (tedit 56D1B4CB) (tstamp 493afed3-8e55-4fb8-990d-f4e265ffbe92) - (at 144.575 205.851) - (descr "Mounting Hole 3.2mm, M3, DIN965") - (tags "mounting hole 3.2mm m3 din965") - (property "Need_order" "0") - (property "Sheetfile" "pa_70.kicad_sch") - (property "Sheetname" "PA 70MHz") - (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-00005fc1e451") - (attr exclude_from_pos_files) - (fp_text reference "H26" (at 0 -3.8) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 609ab0c2-9ed1-40db-bc95-e68314c2d313) - ) - (fp_text value "M3" (at 0 3.8) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 7b2c2296-f250-4528-80c2-40590e2cda2b) - ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp a35fc9eb-bd51-47c3-aadc-152b72c77cfc) - ) - (fp_circle (center 0 0) (end 2.8 0) (layer "Cmts.User") (width 0.15) (fill none) (tstamp 4f100be5-1acc-4b20-b02f-d2bc8d1b5cae)) - (fp_circle (center 0 0) (end 3.05 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp 83c0f714-f2ff-4356-8f6b-8dc782ddba12)) - (pad "1" thru_hole circle (at 0 0) (size 5.6 5.6) (drill 3.2) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "1") (pintype "input") (tstamp 0c41cdb9-e12d-44a2-8308-33ecfe8a6996)) - ) - - (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") - (tedit 5F68FEEF) (tstamp 4c067bb5-d02f-4d3d-b5b6-db8c0297cca9) - (at 124.805 235.241) - (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") - (tags "capacitor handsolder") - (property "MPN" "885612007040/VJ0805A102GXXPW1BC") - (property "Need_order" "0") - (property "Sheetfile" "pa_70.kicad_sch") - (property "Sheetname" "PA 70MHz") - (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/863e537c-f98d-4a14-a07f-a5f6bd6791b3") - (attr smd) - (fp_text reference "C163" (at 0 -1.68) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp c398deda-862b-4ef1-b4a3-44c5832683f9) - ) - (fp_text value "1nF" (at 0 1.68) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp ff5fb714-dcde-4d8b-9e21-30c448335438) - ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 0.5 0.5) (thickness 0.08))) - (tstamp 422da033-eb64-47ee-ab0d-502d93cccde5) - ) - (fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer "F.SilkS") (width 0.12) (tstamp b8e970ca-17ee-4d40-a3cb-3e98731c0787)) - (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer "F.SilkS") (width 0.12) (tstamp e104ec97-6d33-4904-b412-4b83861e0197)) - (fp_line (start 1.88 0.98) (end -1.88 0.98) (layer "F.CrtYd") (width 0.05) (tstamp 333281a8-0472-4d5c-8cdd-424e19fc5c48)) - (fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer "F.CrtYd") (width 0.05) (tstamp 6cfff6f4-36e9-47af-9aa8-206633009cab)) - (fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer "F.CrtYd") (width 0.05) (tstamp 84a1b7fe-ab21-4020-b676-297aac0ccb30)) - (fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer "F.CrtYd") (width 0.05) (tstamp e021eb11-e1ee-4dfc-b2c7-c25a9be28124)) - (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp b61ef127-686e-47fd-889f-7a713618b755)) - (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp d947543e-40b0-4ea4-8e47-e215617e27ba)) - (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp ea17d0a7-1dff-4024-bdd7-d52faff8defc)) - (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp f52ea4da-b445-4824-b8af-fe86d9210b30)) - (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 156 "/PA 70MHz/PA_OUT") (pintype "passive") (tstamp 1862c4c3-ea4e-4ef2-8897-0df4a7117804)) - (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 155 "Net-(C162-Pad2)") (pintype "passive") (tstamp fc6ec218-5191-4a4e-a30f-eea3013596e2)) - (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - (footprint "Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 4c435530-ca6a-494b-8e0b-02e023d4dc8f) - (at 127.055 231.611) + (at 125.73 182.626 180) (descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "TAJA106K016RNJ") @@ -7741,9 +7657,9 @@ (fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer "F.Fab") (width 0.1) (tstamp 8ec6e1d6-6299-48f9-9636-e985c0b21ab8)) (fp_line (start 1.6 1.25) (end -1.6 1.25) (layer "F.Fab") (width 0.1) (tstamp f14da857-d47b-4c42-bfe5-79ed5a111db2)) (fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer "F.Fab") (width 0.1) (tstamp ffd1dd54-43cb-463f-b754-9d55c3a8d2b3)) - (pad "1" smd roundrect (at -1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) - (net 135 "/PA 70MHz/12V") (pintype "passive") (tstamp bd7400d3-0cb0-43e9-ae32-d22bea9b3088)) - (pad "2" smd roundrect (at 1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) + (pad "1" smd roundrect (at -1.5625 0 180) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) + (net 366 "Net-(J17-Pad1)") (pintype "passive") (tstamp bd7400d3-0cb0-43e9-ae32-d22bea9b3088)) + (pad "2" smd roundrect (at 1.5625 0 180) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) (net 2 "GND") (pintype "passive") (tstamp 8adba027-b14f-43d0-b3e0-867811caa232)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" (offset (xyz 0 0 0)) @@ -7780,67 +7696,6 @@ (net 2 "GND") (pinfunction "1") (pintype "input") (tstamp 34ecaac8-de5d-41a5-ad59-745252ac0c2d)) ) - (footprint "Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical" (layer "F.Cu") - (tedit 59FED5CC) (tstamp 4c61f573-369b-4d30-815b-d568a99595a3) - (at 137.414 55.895) - (descr "Through hole straight pin header, 1x08, 2.54mm pitch, single row") - (tags "Through hole pin header THT 1x08 2.54mm single row") - (property "MPN" "SSW-108-01-G-S") - (property "Need_order" "0") - (property "Sheetfile" "kicad-dart-70.kicad_sch") - (property "Sheetname" "") - (path "/00018c5e-dc16-4e6c-9b1e-45710afc5920") - (attr through_hole) - (fp_text reference "J16" (at 0 -2.33) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp d95c148e-c56b-4081-ac7c-9e6526ef73c1) - ) - (fp_text value "Base to PA" (at 0 20.11) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp a1951042-c94a-4186-93d0-a458282cc668) - ) - (fp_text user "${REFERENCE}" (at 0 8.89 90) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp b0126120-1b17-4ecc-812c-5190ccfe0199) - ) - (fp_line (start -1.33 1.27) (end -1.33 19.11) (layer "F.SilkS") (width 0.12) (tstamp 1349e34d-67b9-4afc-baf5-fd19e7e389a0)) - (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer "F.SilkS") (width 0.12) (tstamp 6bf763a4-f016-44d1-b951-e005a22f7a43)) - (fp_line (start 1.33 1.27) (end 1.33 19.11) (layer "F.SilkS") (width 0.12) (tstamp 9070202b-0495-43d0-a7dd-a14d36531cc6)) - (fp_line (start -1.33 0) (end -1.33 -1.33) (layer "F.SilkS") (width 0.12) (tstamp ec2ecba2-83a5-4420-9ae0-d205d462500f)) - (fp_line (start -1.33 19.11) (end 1.33 19.11) (layer "F.SilkS") (width 0.12) (tstamp ee577ed3-f9f5-4185-b51d-dc088dbd0103)) - (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer "F.SilkS") (width 0.12) (tstamp f041e8c4-9c07-41cb-82a1-9fd787fd4010)) - (fp_line (start -1.8 19.55) (end 1.8 19.55) (layer "F.CrtYd") (width 0.05) (tstamp 2dc2044e-24c4-45d1-b109-05d7696fbe52)) - (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp 594eaf73-e3e4-4b89-89c7-f9bde74c4a91)) - (fp_line (start -1.8 -1.8) (end -1.8 19.55) (layer "F.CrtYd") (width 0.05) (tstamp b86042fb-0d07-4870-81e4-eb51301ada16)) - (fp_line (start 1.8 19.55) (end 1.8 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp dbfb02b7-c79c-4a06-ac4e-174d918b58b5)) - (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp 968d184e-8a1f-4f69-9615-853123424a1e)) - (fp_line (start 1.27 19.05) (end -1.27 19.05) (layer "F.Fab") (width 0.1) (tstamp b565a7c6-f732-4310-b538-ece994a6bf45)) - (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp edb3678b-c853-41c4-9e5a-8961920d8589)) - (fp_line (start 1.27 -1.27) (end 1.27 19.05) (layer "F.Fab") (width 0.1) (tstamp ee0af2c3-9a23-41f4-93b4-78dd7ec5a5b9)) - (fp_line (start -1.27 19.05) (end -1.27 -0.635) (layer "F.Fab") (width 0.1) (tstamp fd4c6c48-49ae-4003-a037-805e75b2e31d)) - (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 1 "+12V") (pinfunction "Pin_1") (pintype "passive") (tstamp ce500e02-c890-4295-9e1b-10d4ebea213b)) - (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 1 "+12V") (pinfunction "Pin_2") (pintype "passive") (tstamp a21d71fb-9f44-446f-8efb-dba3d866e79d)) - (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 1 "+12V") (pinfunction "Pin_3") (pintype "passive") (tstamp 413ab3e7-56a3-4e51-b774-cc49cd3d8832)) - (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "Pin_4") (pintype "passive") (tstamp 90d2d374-ad53-4508-be93-32b56cd90f9b)) - (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 355 "Net-(J16-Pad5)") (pinfunction "Pin_5") (pintype "passive") (tstamp 35025075-c8a6-497b-98d1-2460b67499e3)) - (pad "6" thru_hole oval (at 0 12.7) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "Pin_6") (pintype "passive") (tstamp 7d1a1fb6-5e2a-42d3-9b8b-7cb5bc5ca1c8)) - (pad "7" thru_hole oval (at 0 15.24) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "Pin_7") (pintype "passive") (tstamp 4385ed9b-580a-4930-8004-bc40b0e0e16a)) - (pad "8" thru_hole oval (at 0 17.78) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 240 "/EN_VTX") (pinfunction "Pin_8") (pintype "passive") (tstamp cab32441-3320-45a5-a98f-52b655d0afc9)) - (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x08_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 4dd377c7-ef0d-46a8-b081-7ed2f98c88ec) (at 74.93 82.804 -90) @@ -7876,7 +7731,7 @@ (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 77 "Net-(C66-Pad2)") (pintype "passive") (tstamp c0c73670-e5af-4668-b47e-450d73c18c2d)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 181 "Net-(D15-Pad2)") (pintype "passive") (tstamp f88ac9cf-918c-4ca1-80ee-e58908c44828)) + (net 175 "Net-(D15-Pad2)") (pintype "passive") (tstamp f88ac9cf-918c-4ca1-80ee-e58908c44828)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -7973,7 +7828,7 @@ (pad "2" smd rect (at 0 1.45) (size 2 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (net 29 "Net-(C25-Pad1)") (pinfunction "2") (pintype "passive") (tstamp 67a513f7-f3bd-425b-a022-d18ce3bcfd24)) (pad "3" smd rect (at -1.25 -1.45) (size 1.3 1.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 243 "/Baseband/CW_TONE") (pinfunction "3") (pintype "passive") (tstamp 68079c4a-3689-4f6c-9fe0-e5bce74e05ea)) + (net 236 "/Baseband/CW_TONE") (pinfunction "3") (pintype "passive") (tstamp 68079c4a-3689-4f6c-9fe0-e5bce74e05ea)) (model "${KICAD6_3DMODEL_DIR}/Potentiometer_SMD.3dshapes/Potentiometer_Bourns_3214W_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -7983,7 +7838,7 @@ (footprint "mpb:C_Trimmer_Voltronics_JZ" (layer "F.Cu") (tedit 590DA842) (tstamp 4fd4e793-4deb-483c-b374-f8340f0225db) - (at 167.64 85.344 180) + (at 169.672 84.582 180) (descr "trimmer capacitor SMD horizontal") (tags "Voltronics Knowles JZ series") (property "MPN" "JZ-300") @@ -8044,9 +7899,118 @@ ) ) + (footprint "Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical" (layer "F.Cu") + (tedit 59FED5CC) (tstamp 50930cc9-6932-479a-b06c-aee3a18719c6) + (at 139.7 73.645 180) + (descr "Through hole straight pin header, 1x08, 2.54mm pitch, single row") + (tags "Through hole pin header THT 1x08 2.54mm single row") + (property "MPN" "SSW-108-01-G-S") + (property "Need_order" "0") + (property "Sheetfile" "pa_70.kicad_sch") + (property "Sheetname" "PA 70MHz") + (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/12a0ddb4-5816-41d5-ac4d-eb7cb35e1a8b") + (attr through_hole) + (fp_text reference "J16" (at 0 -2.33) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 3b45ffd0-dbf8-4770-b463-60ed4930b1d9) + ) + (fp_text value "Base to PA" (at 0 20.11) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 3117a7a1-2c88-44ad-b876-517ddc4bf9b9) + ) + (fp_text user "${REFERENCE}" (at 0 8.89 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 054f1ae5-c416-4903-8e2f-414a99a4cd80) + ) + (fp_line (start -1.33 0) (end -1.33 -1.33) (layer "F.SilkS") (width 0.12) (tstamp 14298cde-7267-4ab8-8702-bf6dfa375f22)) + (fp_line (start 1.33 1.27) (end 1.33 19.11) (layer "F.SilkS") (width 0.12) (tstamp 3e534e0c-13d2-48c0-9d90-ffdc0be9d0e2)) + (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer "F.SilkS") (width 0.12) (tstamp 416afd61-6d5b-4755-b059-9928135dab5b)) + (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer "F.SilkS") (width 0.12) (tstamp 88abcb83-cdee-44d3-bb65-38dce97f9e81)) + (fp_line (start -1.33 1.27) (end -1.33 19.11) (layer "F.SilkS") (width 0.12) (tstamp 9146f0c7-87ff-43a3-afcd-fedf40fc8907)) + (fp_line (start -1.33 19.11) (end 1.33 19.11) (layer "F.SilkS") (width 0.12) (tstamp e1433d87-e468-456e-884a-ca676a29e920)) + (fp_line (start -1.8 -1.8) (end -1.8 19.55) (layer "F.CrtYd") (width 0.05) (tstamp 0d1c90d3-c717-4943-8b0d-f708831f390d)) + (fp_line (start 1.8 19.55) (end 1.8 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp 3e1e6609-d2ae-456c-aa49-a835d37a6b4f)) + (fp_line (start -1.8 19.55) (end 1.8 19.55) (layer "F.CrtYd") (width 0.05) (tstamp 400f6c89-0db1-487d-a2cd-270d2cb8ed99)) + (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp a9cab733-9908-4a65-a310-ef313b9abcb9)) + (fp_line (start 1.27 19.05) (end -1.27 19.05) (layer "F.Fab") (width 0.1) (tstamp 2058c583-adf8-40aa-a457-51a7c4bbe480)) + (fp_line (start -1.27 19.05) (end -1.27 -0.635) (layer "F.Fab") (width 0.1) (tstamp 5c448ec2-dd13-4d87-a7d9-ac3c795bf46f)) + (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp 6b57fc26-7a76-4e55-bf18-78d3372fe5bb)) + (fp_line (start 1.27 -1.27) (end 1.27 19.05) (layer "F.Fab") (width 0.1) (tstamp 91d27e57-1b86-4ead-b5aa-2ef9a23f8fe4)) + (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp c713f071-fa41-4978-a11d-4ce4e6617ae1)) + (pad "1" thru_hole rect (at 0 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 1 "+12V") (pinfunction "Pin_1") (pintype "passive") (tstamp 14687d30-ef71-4ea2-9895-a41e7af00086)) + (pad "2" thru_hole oval (at 0 2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 1 "+12V") (pinfunction "Pin_2") (pintype "passive") (tstamp ee1b201d-8231-4a6b-a8cd-aee5c618bc16)) + (pad "3" thru_hole oval (at 0 5.08 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 1 "+12V") (pinfunction "Pin_3") (pintype "passive") (tstamp 4079def3-a18a-4ca7-a0ae-3691b6de450c)) + (pad "4" thru_hole oval (at 0 7.62 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 2 "GND") (pinfunction "Pin_4") (pintype "passive") (tstamp 36b34a1d-d016-462c-8cb7-7c4268f19bcc)) + (pad "5" thru_hole oval (at 0 10.16 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 364 "Net-(R136-Pad1)") (pinfunction "Pin_5") (pintype "passive") (tstamp f017d245-0453-486e-b31d-966d8ad547ab)) + (pad "6" thru_hole oval (at 0 12.7 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 2 "GND") (pinfunction "Pin_6") (pintype "passive") (tstamp 66df5ae2-7727-49b9-94ca-3e971742d879)) + (pad "7" thru_hole oval (at 0 15.24 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 2 "GND") (pinfunction "Pin_7") (pintype "passive") (tstamp f1faf365-2278-41fb-b9b0-ec09a5332936)) + (pad "8" thru_hole oval (at 0 17.78 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 362 "Net-(C154-Pad1)") (pinfunction "Pin_8") (pintype "passive") (tstamp 0678a9d3-0af1-4b6b-bbde-021fed6befc6)) + (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x08_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Package_TO_SOT_SMD:SOT-23_Handsoldering" (layer "F.Cu") + (tedit 5A0AB76C) (tstamp 509316d7-1f5b-4a96-a6c6-b10cfdd2c5e0) + (at 125.984 86.36 90) + (descr "SOT-23, Handsoldering") + (tags "SOT-23") + (property "MPN" "BAT18") + (property "Need_order" "0") + (property "Sheetfile" "ant_switch.kicad_sch") + (property "Sheetname" "Antenna Switch") + (path "/2eb25ee2-d512-42fe-80f1-00400ed0a45e/68594239-e6ee-4f12-bf7b-91e58ba88563") + (attr smd) + (fp_text reference "D25" (at 0 -2.5 90) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 92cfa66c-db9c-425b-b6fd-2eface8ef2ea) + ) + (fp_text value "BAT18" (at 0 2.5 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp d004e305-b812-4929-895b-a623e344b5d4) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.075))) + (tstamp 93f062c7-a0cf-45dd-831d-b0193903bcf8) + ) + (fp_line (start 0.76 1.58) (end -0.7 1.58) (layer "F.SilkS") (width 0.12) (tstamp 6d1d2598-c092-45a5-97ea-c9bf3ba32e0b)) + (fp_line (start 0.76 1.58) (end 0.76 0.65) (layer "F.SilkS") (width 0.12) (tstamp da870ea9-98ca-4209-a080-1a91f02cbc3b)) + (fp_line (start 0.76 -1.58) (end -2.4 -1.58) (layer "F.SilkS") (width 0.12) (tstamp f2262af6-1e4c-4a8f-8246-2334b6f9d77a)) + (fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer "F.SilkS") (width 0.12) (tstamp f8638a76-46a2-4c9c-844f-e2e0950f5fb0)) + (fp_line (start -2.7 1.75) (end -2.7 -1.75) (layer "F.CrtYd") (width 0.05) (tstamp 1d871f62-ca60-4b1d-91e9-9786bd67eda7)) + (fp_line (start 2.7 1.75) (end -2.7 1.75) (layer "F.CrtYd") (width 0.05) (tstamp 23484304-4bc3-4de9-857c-de48614d973b)) + (fp_line (start -2.7 -1.75) (end 2.7 -1.75) (layer "F.CrtYd") (width 0.05) (tstamp 33acec55-7969-463a-a730-f0eb7f0545b4)) + (fp_line (start 2.7 -1.75) (end 2.7 1.75) (layer "F.CrtYd") (width 0.05) (tstamp c2818f8f-19db-4b0f-82f8-4897f67a4bf3)) + (fp_line (start -0.7 -0.95) (end -0.7 1.5) (layer "F.Fab") (width 0.1) (tstamp 01d8e1f2-2a4e-4109-877c-2a3e01667b18)) + (fp_line (start -0.7 -0.95) (end -0.15 -1.52) (layer "F.Fab") (width 0.1) (tstamp 26b31601-51ce-405f-92d5-aa3274507d34)) + (fp_line (start -0.7 1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp 53fd27aa-87c1-4074-8d9d-e7921145bef0)) + (fp_line (start -0.15 -1.52) (end 0.7 -1.52) (layer "F.Fab") (width 0.1) (tstamp bf8f2b20-85de-4144-8731-e449539205e6)) + (fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp f4dee69a-78e7-496d-80d1-7cc23d917071)) + (pad "1" smd rect (at -1.5 -0.95 90) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") + (net 367 "Net-(D24-Pad3)") (pinfunction "A") (pintype "passive") (tstamp 8dfd7ebf-7704-4ee2-bcc8-91f7e5cb17c5)) + (pad "2" smd rect (at -1.5 0.95 90) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp c8cd3556-99d2-40a9-a793-61a165871dc9)) + (pad "3" smd rect (at 1.5 0 90) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") + (net 161 "Net-(C116-Pad1)") (pinfunction "K") (pintype "passive") (tstamp f865297f-252d-474a-b73b-5ab6496eaf32)) + (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 509ce4ad-a911-4cd7-9a26-2bc80297c4a2) - (at 184.404 52.324 90) + (at 182.118 50.038 180) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -8055,15 +8019,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/27b97eae-06d9-42c6-9426-74dd348760b0") (attr smd) - (fp_text reference "C115" (at 0 -1.43 90) (layer "F.SilkS") + (fp_text reference "C115" (at 0 -1.43) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 1e48110f-8828-467e-b923-ae2f5648f4ac) ) - (fp_text value "5.1pF" (at 0 1.43 90) (layer "F.Fab") + (fp_text value "5.1pF" (at 0 1.43) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp b7fa0af0-22af-4403-a303-c1dd24f91aa5) ) - (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 884efcdc-d8cc-4653-8ab2-86891fa0611b) ) @@ -8077,9 +8041,9 @@ (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 4cc43c38-b814-4720-aa96-d285802f51e2)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 850e2b64-f694-41a7-b193-9510f4ff2616)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp dd9b7d62-2b4d-4e7d-8515-ad4841709fbe)) - (pad "1" smd roundrect (at -0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 119 "Net-(C112-Pad2)") (pintype "passive") (tstamp 8f9f5dad-85f5-456e-b2f5-926010f886d0)) - (pad "2" smd roundrect (at 0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "2" smd roundrect (at 0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 121 "Net-(C115-Pad2)") (pintype "passive") (tstamp 5456ff74-1204-48af-b1fe-e5468a67b657)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) @@ -8088,6 +8052,54 @@ ) ) + (footprint "Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical" (layer "F.Cu") + (tedit 59FED5CC) (tstamp 509f8376-6c97-4fd7-8b44-a23c3e8f2b1d) + (at 143.505 -24.638 90) + (descr "Through hole straight pin header, 1x02, 2.54mm pitch, single row") + (tags "Through hole pin header THT 1x02 2.54mm single row") + (property "Need_order" "0") + (property "Sheetfile" "pa_70.kicad_sch") + (property "Sheetname" "PA 70MHz") + (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/f533d72a-1886-442f-9758-ab1dd9facd6c") + (attr through_hole) + (fp_text reference "J18" (at 0 -2.33 90) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 1ee59a8b-a090-4fb7-a673-5768ecd341d8) + ) + (fp_text value "PA OUT" (at 0 4.87 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp fe38556d-c997-4547-be9a-57feab775ba0) + ) + (fp_text user "${REFERENCE}" (at 0 1.27) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 9eef97d9-07e7-4888-9aad-6931d723b353) + ) + (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer "F.SilkS") (width 0.12) (tstamp 756f61a8-35bf-40fd-a654-ac1936f04187)) + (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer "F.SilkS") (width 0.12) (tstamp 9d8433bf-3d3a-4b0c-816b-7f3f56b79dc2)) + (fp_line (start 1.33 1.27) (end 1.33 3.87) (layer "F.SilkS") (width 0.12) (tstamp 9e8ffc26-9d0c-4b8a-8bc7-7c1f8586acee)) + (fp_line (start -1.33 0) (end -1.33 -1.33) (layer "F.SilkS") (width 0.12) (tstamp b54e1836-ac93-426b-9b03-1fa555989c4f)) + (fp_line (start -1.33 3.87) (end 1.33 3.87) (layer "F.SilkS") (width 0.12) (tstamp ca5e69c5-54fd-4dee-8c1b-0271225c248d)) + (fp_line (start -1.33 1.27) (end -1.33 3.87) (layer "F.SilkS") (width 0.12) (tstamp fc74e317-85bf-476e-b2c5-efb27636088d)) + (fp_line (start -1.8 4.35) (end 1.8 4.35) (layer "F.CrtYd") (width 0.05) (tstamp 2139f9bb-c934-4528-ac6a-252f1f5bc21e)) + (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp 791051c0-b5c5-475a-94c7-edf3b4dbbfa7)) + (fp_line (start -1.8 -1.8) (end -1.8 4.35) (layer "F.CrtYd") (width 0.05) (tstamp 88dafb82-8d6d-4fc8-a2c3-22186b5fa438)) + (fp_line (start 1.8 4.35) (end 1.8 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp a51a87fd-ecd4-4a03-bfa7-fd7fd3b85713)) + (fp_line (start 1.27 -1.27) (end 1.27 3.81) (layer "F.Fab") (width 0.1) (tstamp 3abb6240-4604-411c-8878-16b5681905b2)) + (fp_line (start -1.27 3.81) (end -1.27 -0.635) (layer "F.Fab") (width 0.1) (tstamp 69cde527-7c6b-44ac-91f9-62178b3153cf)) + (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp d48734b7-215b-478a-8771-e7219e3a2adb)) + (fp_line (start 1.27 3.81) (end -1.27 3.81) (layer "F.Fab") (width 0.1) (tstamp dae08df0-efd6-456c-b6cc-c925c25b22b0)) + (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp e12fe830-a467-4b81-9867-58f4552f797e)) + (pad "1" thru_hole rect (at 0 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 148 "Net-(C155-Pad2)") (pinfunction "In") (pintype "passive") (tstamp b5f2fefd-de2e-40d7-9ed4-126d6041a4fc)) + (pad "2" thru_hole oval (at 0 2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 2 "GND") (pinfunction "Ext") (pintype "passive") (tstamp 6a8647c7-b900-4143-a722-460130a50f90)) + (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 50b35580-4a88-4ca9-8e37-ea969bd4a3e8) (at 81.534 56.134 -90) @@ -8134,7 +8146,7 @@ (footprint "Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 50cd21a6-d9e6-4011-bae9-f2d131b0684a) - (at -111.252 22.098 90) + (at -25.146 28.194 90) (descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "TAJA106K016RNJ") @@ -8179,7 +8191,7 @@ (footprint "Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 523a0d91-59b2-4e23-898b-b7883fa051ad) - (at 66.294 34.798 -90) + (at 70.104 34.798 -90) (descr "Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2BAS56NG00L") @@ -8258,11 +8270,11 @@ (fp_line (start -0.325 -1.45) (end 0.65 -1.45) (layer "F.Fab") (width 0.1) (tstamp 8141f5a9-20e3-4a93-b1f6-2b76f80fb931)) (fp_line (start 0.65 1.45) (end -0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp 8f3b2d57-95c5-4cfb-85a9-c2d680d391c7)) (pad "1" smd roundrect (at -0.9375 -0.95 90) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 287 "Net-(Q1-Pad1)") (pinfunction "B") (pintype "input") (tstamp 88e0df6e-8250-429a-9cd6-07bf1443a3d8)) + (net 278 "Net-(Q1-Pad1)") (pinfunction "B") (pintype "input") (tstamp 88e0df6e-8250-429a-9cd6-07bf1443a3d8)) (pad "2" smd roundrect (at -0.9375 0.95 90) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "E") (pintype "passive") (tstamp 76f98619-d503-43b1-9543-cbe8ef4bf8db)) (pad "3" smd roundrect (at 0.9375 0 90) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 241 "/MIC_PTTn") (pinfunction "C") (pintype "passive") (tstamp c1b12f1e-25c0-4d2d-96ac-0ed91df12a9f)) + (net 234 "/MIC_PTTn") (pinfunction "C") (pintype "passive") (tstamp c1b12f1e-25c0-4d2d-96ac-0ed91df12a9f)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -8272,7 +8284,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 535b9a77-1640-437d-bbd5-e11008167d89) - (at 80.264 30.48 180) + (at 74.676 40.894) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -8302,10 +8314,10 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp adac467f-ba8f-4fa2-9986-dccee44760e5)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp b173eb87-20cc-4644-a3b3-0aaf4649b0ce)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e7b3d22e-33f5-4957-8617-b0e31a033bf9)) - (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 318 "Net-(R100-Pad1)") (pintype "passive") (tstamp 549df579-9404-45cb-b53b-a8be823cf1eb)) - (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 278 "/LO1") (pintype "passive") (tstamp 61ce03f2-d655-4e4d-b4ec-862b7234c7e6)) + (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 308 "Net-(R100-Pad1)") (pintype "passive") (tstamp 549df579-9404-45cb-b53b-a8be823cf1eb)) + (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 269 "/LO1") (pintype "passive") (tstamp 61ce03f2-d655-4e4d-b4ec-862b7234c7e6)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -8315,7 +8327,7 @@ (footprint "Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 5360027f-840b-4bfb-b57f-f6a95ddfd440) - (at 166.624 63.5) + (at 167.132 58.928) (descr "Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2BASR33G00L") @@ -8347,9 +8359,9 @@ (fp_line (start 1 0.6) (end -1 0.6) (layer "F.Fab") (width 0.1) (tstamp 88c62a66-47c9-4b87-b735-db8c96dea85f)) (fp_line (start 1 -0.6) (end 1 0.6) (layer "F.Fab") (width 0.1) (tstamp ff026d7a-4d35-464e-a192-bf8b09bfccd0)) (pad "1" smd roundrect (at -1.025 0) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 283 "Net-(L23-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 428c9343-cc9a-4637-97e7-449b89c5f3bf)) + (net 274 "Net-(L23-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 428c9343-cc9a-4637-97e7-449b89c5f3bf)) (pad "2" smd roundrect (at 1.025 0) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 284 "Net-(L25-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 7d519f6c-57f3-4c43-8263-59226c0ca617)) + (net 275 "Net-(L25-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 7d519f6c-57f3-4c43-8263-59226c0ca617)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -8403,18 +8415,18 @@ (footprint "mpb:AirCoil-8mm-or-2-series-1008" (layer "F.Cu") (tedit 5E4EB890) (tstamp 54a7d42d-050a-4157-b5bd-0dec32085fdf) - (at 189.484 48.26 180) + (at 181.864 43.942 90) (property "MPN" "2x LQW2UASR56") (property "Need_order" "1") (property "Sheetfile" "frontend_70.kicad_sch") (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/a43d8312-f60e-490a-8179-2ac59b540099") (attr through_hole) - (fp_text reference "L34" (at 2.5 0 90) (layer "F.SilkS") + (fp_text reference "L34" (at 2.5 0) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp a425e24a-c940-49c2-a22a-08272e325105) ) - (fp_text value "110nH" (at -2.5 0 90) (layer "F.Fab") + (fp_text value "110nH" (at -2.5 0) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 65828667-8875-4ffb-ab3b-1a23da49d5ad) ) @@ -8436,21 +8448,21 @@ (fp_line (start 1.05 -2.87) (end 1.05 -0.37) (layer "F.Fab") (width 0.1) (tstamp ddec442e-790d-40d1-8876-cd441ddc0678)) (fp_line (start 1.05 -0.37) (end -0.95 -0.37) (layer "F.Fab") (width 0.1) (tstamp f8a8ef9e-a962-4742-9e09-5b821dce8afb)) (fp_line (start 1.05 2.73) (end -0.95 2.73) (layer "F.Fab") (width 0.1) (tstamp fadb664b-1673-41ed-9f53-1ddc23cc3546)) - (pad "" smd roundrect (at 0.05 -0.4575 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp 6b201641-5d5e-4d73-b0eb-0d4fdfdd27c7)) - (pad "" smd roundrect (at 0.05 0.3175 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp 81e2c189-082b-427d-ae7c-50469531006c)) - (pad "1" thru_hole circle (at 0 -4 180) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) + (pad "" smd roundrect (at 0.05 -0.4575) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp 6b201641-5d5e-4d73-b0eb-0d4fdfdd27c7)) + (pad "" smd roundrect (at 0.05 0.3175) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp 81e2c189-082b-427d-ae7c-50469531006c)) + (pad "1" thru_hole circle (at 0 -4 90) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) (net 121 "Net-(C115-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 02ea4fdb-d4d2-4a58-be66-24dd8104b683)) - (pad "1" smd roundrect (at 0.05 -2.7825 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (pad "1" smd roundrect (at 0.05 -2.7825) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 121 "Net-(C115-Pad2)") (pinfunction "1") (pintype "passive") (tstamp b9979b11-97ba-4f40-81a6-6e5ff0ad2501)) - (pad "2" thru_hole circle (at 0 4 180) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) + (pad "2" thru_hole circle (at 0 4 90) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp ab2cb1d4-cd62-45c1-ae5c-8c97649debfc)) - (pad "2" smd roundrect (at 0.05 2.6425 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (pad "2" smd roundrect (at 0.05 2.6425) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp bd7c24c3-69f3-497f-9a9a-b0c1d05c4bb6)) ) (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 557463df-3cdb-4573-89ba-e6c8360528a6) - (at 226.187 51.435 90) + (at 227.076 51.435 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -8492,37 +8504,9 @@ ) ) - (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") - (tedit 56D1B4CB) (tstamp 55833a0c-6ab5-4364-ad5c-c879a760011f) - (at 127.625 225.911) - (descr "Mounting Hole 3.2mm, M3, DIN965") - (tags "mounting hole 3.2mm m3 din965") - (property "Need_order" "0") - (property "Sheetfile" "pa_70.kicad_sch") - (property "Sheetname" "PA 70MHz") - (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-00005fc1e605") - (attr exclude_from_pos_files) - (fp_text reference "H27" (at 0 -3.8) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 3888646a-c552-4b29-85e8-9a9094178fd9) - ) - (fp_text value "M3" (at 0 3.8) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 3c4bbcad-2532-4fee-b64e-1e2d3804840f) - ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp fcefa699-a45c-421e-92bd-36c1b6ff9b33) - ) - (fp_circle (center 0 0) (end 2.8 0) (layer "Cmts.User") (width 0.15) (fill none) (tstamp bbe2f48c-4470-4d5a-916f-4968081b0754)) - (fp_circle (center 0 0) (end 3.05 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp dccb7598-5e65-429e-bf6f-a4420a076bd5)) - (pad "1" thru_hole circle (at 0 0) (size 5.6 5.6) (drill 3.2) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "1") (pintype "input") (tstamp f77cd0b0-059e-47d6-83c8-3e257a8c5564)) - ) - (footprint "Package_TO_SOT_SMD:SOT-323_SC-70_Handsoldering" (layer "F.Cu") (tedit 5A02FF57) (tstamp 558ede08-e18e-4b50-b204-b7fdc2a26aad) - (at 96.52 29.21 90) + (at 85.852 32.9985 -90) (descr "SOT-323, SC-70 Handsoldering") (tags "SOT-323 SC-70 Handsoldering") (property "MPN" "BAT68-04W") @@ -8556,12 +8540,12 @@ (fp_line (start 0.675 -1.1) (end 0.675 1.1) (layer "F.Fab") (width 0.1) (tstamp 3853b475-55c6-4652-a836-fc6c794a6d6f)) (fp_line (start 0.675 -1.1) (end -0.175 -1.1) (layer "F.Fab") (width 0.1) (tstamp 6019e6ce-edef-4e51-8196-44b8be29284e)) (fp_line (start 0.675 1.1) (end -0.675 1.1) (layer "F.Fab") (width 0.1) (tstamp f23c569b-9303-43ff-a4dc-74f9810b8b88)) - (pad "1" smd rect (at -1.33 -0.65) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 186 "Net-(D18-Pad1)") (pintype "passive") (tstamp be194f90-ee16-4ee8-9b4b-eca65baa4169)) - (pad "2" smd rect (at -1.33 0.65) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 187 "Net-(D18-Pad2)") (pintype "passive") (tstamp ef50033f-71b7-42ae-a745-134f97a3c5e0)) - (pad "3" smd rect (at 1.33 0) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 188 "Net-(D18-Pad3)") (pintype "passive") (tstamp a0fad240-51d7-4ff4-8a11-ab5bee64adfb)) + (pad "1" smd rect (at -1.33 -0.65 180) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") + (net 180 "Net-(D18-Pad1)") (pintype "passive") (tstamp be194f90-ee16-4ee8-9b4b-eca65baa4169)) + (pad "2" smd rect (at -1.33 0.65 180) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") + (net 181 "Net-(D18-Pad2)") (pintype "passive") (tstamp ef50033f-71b7-42ae-a745-134f97a3c5e0)) + (pad "3" smd rect (at 1.33 0 180) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") + (net 182 "Net-(D18-Pad3)") (pintype "passive") (tstamp a0fad240-51d7-4ff4-8a11-ab5bee64adfb)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-323_SC-70.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -8619,9 +8603,9 @@ (pad "1" thru_hole circle (at 0 0 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "1") (pintype "passive") (tstamp ef14fda2-79ed-49d9-8846-19c7b251f579)) (pad "2" thru_hole circle (at 6.5 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) - (net 330 "/Control on separate board/BTN2") (pinfunction "2") (pintype "passive") (tstamp 0e43b435-50c6-4aaa-a7ec-5ebff5648366)) + (net 319 "/Control on separate board/BTN2") (pinfunction "2") (pintype "passive") (tstamp 0e43b435-50c6-4aaa-a7ec-5ebff5648366)) (pad "2" thru_hole circle (at 0 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) - (net 330 "/Control on separate board/BTN2") (pinfunction "2") (pintype "passive") (tstamp be96ddac-740b-465b-bf05-80ad1e826077)) + (net 319 "/Control on separate board/BTN2") (pinfunction "2") (pintype "passive") (tstamp be96ddac-740b-465b-bf05-80ad1e826077)) (model "${KICAD6_3DMODEL_DIR}/Button_Switch_THT.3dshapes/SW_PUSH_6mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -8666,10 +8650,10 @@ (fp_line (start -0.7 -0.95) (end -0.15 -1.52) (layer "F.Fab") (width 0.1) (tstamp 81ad28ac-7f36-4df9-9a1b-ee426a2ea4ea)) (fp_line (start -0.15 -1.52) (end 0.7 -1.52) (layer "F.Fab") (width 0.1) (tstamp 9f4e4630-c9b5-4a5a-94aa-4a096223d458)) (pad "1" smd rect (at -1.5 -0.95 180) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 176 "Net-(D10-Pad1)") (pinfunction "A") (pintype "passive") (tstamp f1cb56de-20e1-4b90-80dd-100f8cc1d888)) + (net 170 "Net-(D10-Pad1)") (pinfunction "A") (pintype "passive") (tstamp f1cb56de-20e1-4b90-80dd-100f8cc1d888)) (pad "2" smd rect (at -1.5 0.95 180) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp 87a09e45-3b63-440d-bc01-fbeeaba81b05)) (pad "3" smd rect (at 1.5 0 180) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 175 "Net-(D10-Pad3)") (pinfunction "K") (pintype "passive") (tstamp 68ecbf1d-a738-4982-892f-eac4664da606)) + (net 169 "Net-(D10-Pad3)") (pinfunction "K") (pintype "passive") (tstamp 68ecbf1d-a738-4982-892f-eac4664da606)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -8767,16 +8751,16 @@ (footprint "mpb:large_inductor" (layer "F.Cu") (tedit 5FC0D6CB) (tstamp 5770c51f-2af9-4ff1-b2bc-614ea9042d45) - (at 117.855 203.626) + (at 120.142 63.246 90) (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/b210c741-e1e0-447a-806b-1fb1e78ea989") (attr through_hole) - (fp_text reference "L42" (at 1.5 -0.15 90) (layer "F.SilkS") + (fp_text reference "L42" (at 1.5 -0.15) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp b132114d-70ba-408b-a17c-318255abbd4b) ) - (fp_text value "150nH" (at 0 -0.5) (layer "F.Fab") + (fp_text value "150nH" (at 0 -0.5 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp db3f0e07-3df6-4d9a-9e46-4964e35cb5e7) ) @@ -8786,19 +8770,19 @@ (fp_arc (start -1.4 1) (mid -2.4 0) (end -1.4 -1) (layer "F.SilkS") (width 0.15) (tstamp 084d3c4f-961d-4ce4-aac7-a32e0426f1c2)) (fp_arc (start -1.4 3) (mid -2.4 2) (end -1.4 1) (layer "F.SilkS") (width 0.15) (tstamp 12b8f9f9-c622-4b0b-a325-b55d129b5c5c)) (fp_arc (start -1.4 -1) (mid -2.4 -2) (end -1.4 -3) (layer "F.SilkS") (width 0.15) (tstamp 8528fbfd-f191-4599-8273-1449cc6bb615)) - (pad "1" smd rect locked (at 0 -6) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 152 "Net-(C156-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 3be62ba2-c754-4300-a7fc-35565a8cf46d)) - (pad "1" smd rect locked (at 0 -4.5) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") - (net 152 "Net-(C156-Pad2)") (pinfunction "1") (pintype "passive") (tstamp af99248e-b93d-4b12-92ef-789b0a7e05f9)) - (pad "2" smd rect locked (at 0 6) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 153 "Net-(C159-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 83b47682-2766-4d89-a1f6-1536cfdb97c6)) - (pad "2" smd rect locked (at 0 4.5) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") - (net 153 "Net-(C159-Pad2)") (pinfunction "2") (pintype "passive") (tstamp f250b125-faf4-4b39-be3a-254d78440f45)) + (pad "1" smd rect locked (at 0 -6 90) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 149 "Net-(C156-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 3be62ba2-c754-4300-a7fc-35565a8cf46d)) + (pad "1" smd rect locked (at 0 -4.5 90) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") + (net 149 "Net-(C156-Pad2)") (pinfunction "1") (pintype "passive") (tstamp af99248e-b93d-4b12-92ef-789b0a7e05f9)) + (pad "2" smd rect locked (at 0 6 90) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 150 "Net-(C159-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 83b47682-2766-4d89-a1f6-1536cfdb97c6)) + (pad "2" smd rect locked (at 0 4.5 90) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") + (net 150 "Net-(C159-Pad2)") (pinfunction "2") (pintype "passive") (tstamp f250b125-faf4-4b39-be3a-254d78440f45)) ) (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 57a2d0cb-50ec-4cdf-85de-8e292d478d54) - (at 145.845 228.571) + (at 128.524 140.462) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM188R71H104KA93D") @@ -8832,7 +8816,7 @@ (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp ff11e3d6-96ad-4510-8998-015f733ce406)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 143 "VGG2") (pintype "passive") (tstamp ff9bd320-bf68-499c-8f04-476234f29d30)) + (net 141 "VGG2") (pintype "passive") (tstamp ff9bd320-bf68-499c-8f04-476234f29d30)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -8881,7 +8865,7 @@ (pad "2" smd roundrect (at -0.9375 0.95 270) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 93 "Net-(C80-Pad2)") (pinfunction "E") (pintype "passive") (tstamp a4874db7-8c80-49ff-bf75-1cec32ab2a58)) (pad "3" smd roundrect (at 0.9375 0 270) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 303 "Net-(Q21-Pad1)") (pinfunction "C") (pintype "passive") (tstamp 8c4e9ab3-1fcf-469c-a8fa-aefe37c402f9)) + (net 293 "Net-(Q21-Pad1)") (pinfunction "C") (pintype "passive") (tstamp 8c4e9ab3-1fcf-469c-a8fa-aefe37c402f9)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -8933,7 +8917,7 @@ (pad "1" smd rect (at -1.4 0 270) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") (net 53 "Net-(C47-Pad2)") (pinfunction "K") (pintype "passive") (tstamp 6b5d11d5-6d1b-45c7-886d-8bf06819a8bf)) (pad "2" smd rect (at 1.4 0 270) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") - (net 172 "Net-(D7-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 4775bc68-1c18-4b26-ada5-8c0224f1d92c)) + (net 166 "Net-(D7-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 4775bc68-1c18-4b26-ada5-8c0224f1d92c)) (model "${KICAD6_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-123F.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -8971,7 +8955,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 5985bb3c-5f3e-4efc-b72c-ad04675e58b9) - (at 166.37 53.34) + (at 166.878 45.974) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "08051A471GAT2A") @@ -9013,9 +8997,57 @@ ) ) + (footprint "Package_TO_SOT_SMD:SOT-23_Handsoldering" (layer "F.Cu") + (tedit 5A0AB76C) (tstamp 59caa43a-8ee7-491b-94ec-d39fdebbc25f) + (at 121.412 90.932) + (descr "SOT-23, Handsoldering") + (tags "SOT-23") + (property "MPN" "BAT18") + (property "Need_order" "0") + (property "Sheetfile" "ant_switch.kicad_sch") + (property "Sheetname" "Antenna Switch") + (path "/2eb25ee2-d512-42fe-80f1-00400ed0a45e/0386d4d2-f79f-4b93-86f1-854306747b7f") + (attr smd) + (fp_text reference "D24" (at 0 -2.5) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 6e77439b-2109-4e7e-bb0f-806d12ffc39b) + ) + (fp_text value "BAT18" (at 0 2.5) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 85671bf9-6ca6-43d7-99a4-560d3d9c3416) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.075))) + (tstamp 4f9395c3-059d-4b95-b7b6-aefad888741b) + ) + (fp_line (start 0.76 1.58) (end 0.76 0.65) (layer "F.SilkS") (width 0.12) (tstamp 6d9e2397-056c-40b8-a59b-73cdc4923a3e)) + (fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer "F.SilkS") (width 0.12) (tstamp a874e63a-9815-4afd-9096-383c80b1a973)) + (fp_line (start 0.76 1.58) (end -0.7 1.58) (layer "F.SilkS") (width 0.12) (tstamp b8450712-c333-4182-a437-15372a7ec533)) + (fp_line (start 0.76 -1.58) (end -2.4 -1.58) (layer "F.SilkS") (width 0.12) (tstamp f659bc1f-5664-4276-8bf3-cb1cdf119e45)) + (fp_line (start 2.7 1.75) (end -2.7 1.75) (layer "F.CrtYd") (width 0.05) (tstamp 0a8fc505-0383-445f-a5a7-a088b751afc3)) + (fp_line (start -2.7 -1.75) (end 2.7 -1.75) (layer "F.CrtYd") (width 0.05) (tstamp 56930d53-dc64-4e87-89c4-425f03b8e6d2)) + (fp_line (start -2.7 1.75) (end -2.7 -1.75) (layer "F.CrtYd") (width 0.05) (tstamp 789f65c2-04ac-48cf-a150-145a2691c06b)) + (fp_line (start 2.7 -1.75) (end 2.7 1.75) (layer "F.CrtYd") (width 0.05) (tstamp a9524f09-9f36-4ba0-8229-6702289b0e7e)) + (fp_line (start -0.7 1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp 337e659e-c272-49b9-abbd-bbc38cc2c7f7)) + (fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp 3542f447-0e45-493d-a433-b02a99e5401c)) + (fp_line (start -0.7 -0.95) (end -0.7 1.5) (layer "F.Fab") (width 0.1) (tstamp a774c0bc-ffad-45b5-8c49-e08b2035b0a1)) + (fp_line (start -0.7 -0.95) (end -0.15 -1.52) (layer "F.Fab") (width 0.1) (tstamp ce64d5f0-ac42-4c95-88f9-2ecf69cd56dd)) + (fp_line (start -0.15 -1.52) (end 0.7 -1.52) (layer "F.Fab") (width 0.1) (tstamp d9fbc1f9-2562-4fd7-9782-7b7e8186edf0)) + (pad "1" smd rect (at -1.5 -0.95) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") + (net 18 "Net-(C17-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 0e27a77d-8c9f-45d1-ba76-04579f909160)) + (pad "2" smd rect (at -1.5 0.95) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp fc96d2fe-492d-4aa9-b7cf-c1fc74fb7bc7)) + (pad "3" smd rect (at 1.5 0) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") + (net 367 "Net-(D24-Pad3)") (pinfunction "K") (pintype "passive") (tstamp 8cec10c9-d0db-4c0e-b571-882b6672e229)) + (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 5a814ddd-7d40-4602-8e15-828ef4e9457f) - (at 143.835 226.061) + (at 123.698 66.548) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -9049,7 +9081,7 @@ (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp b9337dc0-3e14-4f8a-be06-21484d0d8d58)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 153 "Net-(C159-Pad2)") (pintype "passive") (tstamp 0e6da4a9-5e56-4d87-8f6b-3ca5d191a977)) + (net 150 "Net-(C159-Pad2)") (pintype "passive") (tstamp 0e6da4a9-5e56-4d87-8f6b-3ca5d191a977)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9059,7 +9091,7 @@ (footprint "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" (layer "F.Cu") (tedit 5D9F72B1) (tstamp 5a9e3471-a881-4371-b83f-7bf622af6d20) - (at -90.932 21.336) + (at -4.826 27.432) (descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "SOIC SO") (property "MPN" "IRF7309TRPBF") @@ -9096,19 +9128,19 @@ (pad "1" smd roundrect (at -2.475 -1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "S") (pintype "passive") (tstamp 95e1d673-1118-4f7e-8c94-d2d56d9cd1e6)) (pad "2" smd roundrect (at -2.475 -0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 240 "/EN_VTX") (pinfunction "G") (pintype "input") (tstamp 98537263-5a38-4708-bc42-76759ee23977)) + (net 233 "/EN_VTX") (pinfunction "G") (pintype "input") (tstamp 98537263-5a38-4708-bc42-76759ee23977)) (pad "3" smd roundrect (at -2.475 0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 5 "+9VA") (pinfunction "1") (pintype "passive") (tstamp 4d9428d3-9598-4f9e-bbd9-766c229df1bc)) (pad "4" smd roundrect (at -2.475 1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 289 "Net-(Q3-Pad4)") (pinfunction "G") (pintype "input") (tstamp c49948e8-2bbc-402d-b2b9-21be3239c175)) + (net 280 "Net-(Q3-Pad4)") (pinfunction "G") (pintype "input") (tstamp c49948e8-2bbc-402d-b2b9-21be3239c175)) (pad "5" smd roundrect (at 2.475 1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 256 "+VTX") (pinfunction "D") (pintype "passive") (tstamp da809c4b-7f41-4c60-9915-c6479f384b7a)) + (net 247 "+VTX") (pinfunction "D") (pintype "passive") (tstamp da809c4b-7f41-4c60-9915-c6479f384b7a)) (pad "6" smd roundrect (at 2.475 0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 256 "+VTX") (pinfunction "D") (pintype "passive") (tstamp 2dbb2448-4902-43b8-9bf2-87f43c43c4c2)) + (net 247 "+VTX") (pinfunction "D") (pintype "passive") (tstamp 2dbb2448-4902-43b8-9bf2-87f43c43c4c2)) (pad "7" smd roundrect (at 2.475 -0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 289 "Net-(Q3-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 7028fe00-33bb-4150-b409-27f83f321678)) + (net 280 "Net-(Q3-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 7028fe00-33bb-4150-b409-27f83f321678)) (pad "8" smd roundrect (at 2.475 -1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 289 "Net-(Q3-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 5ec297c1-46e7-4415-90ea-804d56f27bb1)) + (net 280 "Net-(Q3-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 5ec297c1-46e7-4415-90ea-804d56f27bb1)) (model "${KICAD6_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9118,7 +9150,7 @@ (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 5ab36b13-8090-4f0d-9fa4-9e5c1e537e88) - (at 221.869 38.989 90) + (at 220.472 38.862 90) (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2UASR56") @@ -9150,7 +9182,7 @@ (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 84dddd99-4e40-45be-8207-69de139f1360)) (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp ab6ee156-e296-4610-b70d-c981564b6165)) (pad "1" smd roundrect (at -1.1625 0 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 359 "Net-(L27-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 937a8e3a-5c05-46b7-8fd2-cd04e86ddb99)) + (net 347 "Net-(L27-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 937a8e3a-5c05-46b7-8fd2-cd04e86ddb99)) (pad "2" smd roundrect (at 1.1625 0 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp dfcbe8f2-e896-48d4-af29-6df76aaaa49b)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" @@ -9257,7 +9289,7 @@ (footprint "Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 5b0a3aba-d2be-432c-9346-2e5c89176fb7) - (at 71.628 28.194 90) + (at 75.438 28.194 90) (descr "Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2BASR22J00L") @@ -9289,7 +9321,7 @@ (fp_line (start 1 -0.6) (end 1 0.6) (layer "F.Fab") (width 0.1) (tstamp b8f79940-5cd4-4031-af96-c5f43bf05b9f)) (fp_line (start -1 0.6) (end -1 -0.6) (layer "F.Fab") (width 0.1) (tstamp f4ca1d01-e5fe-4209-a66b-b9e9436fe9e5)) (pad "1" smd roundrect (at -1.025 0 90) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 281 "Net-(L19-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 01b3348c-68d3-4ce0-bf9c-13837fd225df)) + (net 272 "Net-(L19-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 01b3348c-68d3-4ce0-bf9c-13837fd225df)) (pad "2" smd roundrect (at 1.025 0 90) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) (net 99 "Net-(C86-Pad1)") (pinfunction "2") (pintype "passive") (tstamp 4ba01f7c-828f-4125-8a01-5d84e0d3e5ac)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0805_2012Metric.wrl" @@ -9301,7 +9333,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 5c233bc5-05b2-4619-ae3f-c58fa9a60207) - (at 172.72 93.726 -90) + (at 172.212 95.504 90) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A103KXJTBC") @@ -9332,9 +9364,9 @@ (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp a188e5ac-919c-4204-b1b2-85fe36a24080)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp d88bd59a-32ea-40e1-bc00-5d8d79e26a92)) (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp e905fff8-d615-4a4c-af77-b12fabb66116)) - (pad "1" smd roundrect (at -1.0375 0 270) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (pad "1" smd roundrect (at -1.0375 0 90) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 54d73615-1bde-45ee-8cad-bb7bb39aaba7)) - (pad "2" smd roundrect (at 1.0375 0 270) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (pad "2" smd roundrect (at 1.0375 0 90) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 115 "Net-(C109-Pad2)") (pintype "passive") (tstamp e9325c36-6ba6-47d2-a192-09ae6c7dc121)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) @@ -9376,9 +9408,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 5a5f35a1-a433-45d8-a3ac-038972f5eccc)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 9f2db427-0939-4a12-9474-e4d107072d61)) (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 256 "+VTX") (pintype "passive") (tstamp 7f49e584-c79f-4ef8-83a4-6cc0554215af)) + (net 247 "+VTX") (pintype "passive") (tstamp 7f49e584-c79f-4ef8-83a4-6cc0554215af)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 174 "Net-(D9-Pad1)") (pintype "passive") (tstamp 95ce773f-73b8-49e0-b2e5-99ffb348929f)) + (net 168 "Net-(D9-Pad1)") (pintype "passive") (tstamp 95ce773f-73b8-49e0-b2e5-99ffb348929f)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9431,7 +9463,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 5de89c31-9b50-4d26-a9b4-f898d52a6fe9) - (at 138.545 236.601) + (at 146.558 144.272 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -9461,10 +9493,10 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 642effc1-49b6-4dc4-a4af-b517642e1d3f)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 6f8e18f5-58ed-45b8-8f5b-1d146e4480e6)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 71eedf5f-a652-4e8d-9a3b-f32fe5829eac)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 139 "Net-(C143-Pad1)") (pintype "passive") (tstamp d5d6ad13-0d01-42ee-92d2-a7c06712057f)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 138 "Net-(C140-Pad2)") (pintype "passive") (tstamp 5d75f011-87ab-4d1e-9e90-8a7a73109dea)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 137 "Net-(C143-Pad1)") (pintype "passive") (tstamp d5d6ad13-0d01-42ee-92d2-a7c06712057f)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 136 "Net-(C140-Pad2)") (pintype "passive") (tstamp 5d75f011-87ab-4d1e-9e90-8a7a73109dea)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9472,34 +9504,6 @@ ) ) - (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") - (tedit 56D1B4CB) (tstamp 5e6a5190-8895-410f-be9d-9f0ca5ce4553) - (at 137.414 49.53) - (descr "Mounting Hole 3.2mm, M3, DIN965") - (tags "mounting hole 3.2mm m3 din965") - (property "Need_order" "0") - (property "Sheetfile" "kicad-dart-70.kicad_sch") - (property "Sheetname" "") - (path "/d9d529fd-991b-4552-9107-8a278e25b833") - (attr exclude_from_pos_files) - (fp_text reference "H36" (at 0 -3.8) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp a7c08a44-e3b1-460b-af11-96cc127add47) - ) - (fp_text value "M3" (at 0 3.8) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 269693ed-0897-4548-862b-609ca4e81d67) - ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 4b9e9eda-c8b7-4170-9710-ce9ed506614c) - ) - (fp_circle (center 0 0) (end 2.8 0) (layer "Cmts.User") (width 0.15) (fill none) (tstamp c88bc1e0-d9dc-4fc5-98a3-bebfe3e74348)) - (fp_circle (center 0 0) (end 3.05 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp b72588a2-2cac-4446-adad-e5e51dc590a5)) - (pad "1" thru_hole circle (at 0 0) (size 5.6 5.6) (drill 3.2) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "1") (pintype "input") (tstamp d056c643-9e3c-489c-b92d-a508277626bb)) - ) - (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 5e9f2070-06aa-4076-8d53-2a05e8f87d7b) (at 22.098 56.642 180) @@ -9535,7 +9539,7 @@ (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 46 "Net-(C43-Pad2)") (pintype "passive") (tstamp 0aef2650-c4b7-4fe1-9c7a-11c54be58be0)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 243 "/Baseband/CW_TONE") (pintype "passive") (tstamp 51f89818-0cdd-4dcf-a91d-cd97c9ec23e7)) + (net 236 "/Baseband/CW_TONE") (pintype "passive") (tstamp 51f89818-0cdd-4dcf-a91d-cd97c9ec23e7)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9576,7 +9580,7 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp e5daf9f1-7f03-4959-8b25-23ef7ee2de25)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp f4c9bc01-1241-40fb-a021-cefa4d88b718)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 313 "Net-(R35-Pad1)") (pintype "passive") (tstamp e047c1ee-def7-41a1-8fea-87e019f42c65)) + (net 303 "Net-(R35-Pad1)") (pintype "passive") (tstamp e047c1ee-def7-41a1-8fea-87e019f42c65)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 15 "/BFO") (pintype "passive") (tstamp 6ba42b77-918e-4c98-880c-287918f9e107)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -9586,6 +9590,50 @@ ) ) + (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEF0) (tstamp 5f2c31d0-3a4e-4ad1-9ede-18f025df20c5) + (at 121.412 86.36) + (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") + (tags "inductor handsolder") + (property "MPN" "LQW2UAS1R0x0CL") + (property "Need_order" "0") + (property "Sheetfile" "ant_switch.kicad_sch") + (property "Sheetname" "Antenna Switch") + (path "/2eb25ee2-d512-42fe-80f1-00400ed0a45e/8658dfaa-39b8-4a1e-a53c-e42c215541eb") + (attr smd) + (fp_text reference "L49" (at 0 -2.05) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 6428ce48-8524-46bd-859c-426b76d557fd) + ) + (fp_text value "1uH" (at 0 2.05) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp fbb16abb-a5b7-4ec5-9f53-e7bf15b19889) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.62 0.62) (thickness 0.09))) + (tstamp 4dfcb564-4381-4647-9373-802342200405) + ) + (fp_line (start -0.261252 -1.11) (end 0.261252 -1.11) (layer "F.SilkS") (width 0.12) (tstamp 813bc1a5-422e-42fe-83dd-fac3ea6b84b4)) + (fp_line (start -0.261252 1.11) (end 0.261252 1.11) (layer "F.SilkS") (width 0.12) (tstamp cc851205-446b-4c02-b747-7c58342ebaf9)) + (fp_line (start -2.12 -1.35) (end 2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 2bc22636-5eb5-46bf-a870-493cf4af0360)) + (fp_line (start 2.12 -1.35) (end 2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp 31b5fa25-0e91-418e-8fcc-f22b6b64932c)) + (fp_line (start 2.12 1.35) (end -2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp 5778b252-37df-42fb-8cab-73ee18d51e70)) + (fp_line (start -2.12 1.35) (end -2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp b1a366be-9b82-44a9-a261-da3a548cc438)) + (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 80bf4bf2-7d98-4ca9-a933-5a89c703aeea)) + (fp_line (start 1.25 1) (end -1.25 1) (layer "F.Fab") (width 0.1) (tstamp 80f6f776-819e-4a88-a459-bdf96032ef73)) + (fp_line (start 1.25 -1) (end 1.25 1) (layer "F.Fab") (width 0.1) (tstamp ab8a0f18-943b-4771-9a56-51ddd56003b0)) + (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp f417b18b-d5fa-4125-a5d5-3557ee064e9b)) + (pad "1" smd roundrect (at -1.1625 0) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 353 "Net-(C119-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 4ee1de1b-ffc1-446b-9327-8292da9b681b)) + (pad "2" smd roundrect (at 1.1625 0) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 367 "Net-(D24-Pad3)") (pinfunction "2") (pintype "passive") (tstamp 78cd88f3-959d-46b0-a016-c66f0ab4622e)) + (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 5f4f8861-613a-4c6d-ba77-f48c4c35f76a) (at 58.42 63.5) @@ -9621,7 +9669,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 35 "+VRX") (pintype "passive") (tstamp dbc94d3f-8a12-44da-9e18-0868c1561fe8)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 176 "Net-(D10-Pad1)") (pintype "passive") (tstamp cea35d37-fb62-4fa4-bf97-910bb78ce3b8)) + (net 170 "Net-(D10-Pad1)") (pintype "passive") (tstamp cea35d37-fb62-4fa4-bf97-910bb78ce3b8)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9729,7 +9777,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 610f07d5-12ae-4510-9b1d-6ff61650b24e) - (at 226.187 43.307 90) + (at 227.076 43.307 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -9817,7 +9865,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 61c69259-b512-498b-a9fd-54d535cf7f28) - (at 172.212 89.408 -90) + (at 171.196 92.202) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A103KXJTBC") @@ -9826,15 +9874,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/034633eb-0792-46bf-9523-208d8408265b") (attr smd) - (fp_text reference "C104" (at 0 -1.68 90) (layer "F.SilkS") + (fp_text reference "C104" (at 0 -1.68) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 543fffe2-4e7a-49f0-80f3-7d2d756c193c) ) - (fp_text value "10nF" (at 0 1.68 90) (layer "F.Fab") + (fp_text value "10nF" (at 0 1.68) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp e33f2400-49c8-4bea-9378-3ad238300373) ) - (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.08))) (tstamp 1eea4dbc-81db-42d6-a86d-c011801dc0ec) ) @@ -9848,9 +9896,9 @@ (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 1ef2c397-b9d1-42c7-9ea1-4a8f98d17f18)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 311a8e89-4fbb-4bcf-903e-7a7a87a03e94)) (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp e65ec110-150f-45ee-9564-fb6653d56356)) - (pad "1" smd roundrect (at -1.0375 0 270) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 681efa01-75ce-4ee3-badb-d2f9d47d234f)) - (pad "2" smd roundrect (at 1.0375 0 270) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 111 "Net-(C104-Pad2)") (pintype "passive") (tstamp 922a79df-1a00-4a56-8814-bdb5920d9041)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) @@ -9861,7 +9909,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 62dc5755-aeeb-4d11-b941-b451ebac674c) - (at -95.504 22.352 -90) + (at -9.398 28.448 -90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -9894,7 +9942,7 @@ (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 5 "+9VA") (pintype "passive") (tstamp 0b51f641-855a-4c04-b080-0980cabf9dc3)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 289 "Net-(Q3-Pad4)") (pintype "passive") (tstamp 5f4821e4-8491-49e7-8939-e5b9e56f91b5)) + (net 280 "Net-(Q3-Pad4)") (pintype "passive") (tstamp 5f4821e4-8491-49e7-8939-e5b9e56f91b5)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9938,7 +9986,7 @@ (pad "1" smd roundrect (at -1.4875 0 270) (size 1.425 2.65) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 60 "Net-(C52-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 13824b47-be77-45b3-91e0-5e1efecddc4a)) (pad "2" smd roundrect (at 1.4875 0 270) (size 1.425 2.65) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 173 "Net-(D8-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 919fd896-e4dd-4aae-a000-0bdb219b2ffe)) + (net 167 "Net-(D8-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 919fd896-e4dd-4aae-a000-0bdb219b2ffe)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1210_3225Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -9971,7 +10019,7 @@ (fp_circle (center 0 0) (end 0 0.95) (layer "F.SilkS") (width 0.12) (fill none) (tstamp c3f476fc-7cb8-4256-be9a-7f894b675b1c)) (fp_circle (center 0 0) (end 1.25 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp b158622c-90bf-49e1-b741-08588d05284c)) (pad "1" smd circle (at 0 0) (size 1.5 1.5) (layers "F.Cu" "F.Mask") - (net 350 "/+3V3_CLK") (pinfunction "1") (pintype "passive") (tstamp 32ae22b9-466a-45e1-b693-53871f6bf6a3)) + (net 339 "/+3V3_CLK") (pinfunction "1") (pintype "passive") (tstamp 32ae22b9-466a-45e1-b693-53871f6bf6a3)) ) (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") @@ -10182,7 +10230,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 65b287f5-5b51-40b2-a254-fb45338c5936) - (at 217.932 26.67) + (at 217.678 25.908) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -10256,9 +10304,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 387d5fe7-0209-4bae-9b4c-7c117183b412)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c032bd51-d377-488c-b029-cbdea08e36fa)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 314 "Net-(R36-Pad1)") (pintype "passive") (tstamp 68d9af79-976e-490b-bf12-832c5e1f526c)) + (net 304 "Net-(R36-Pad1)") (pintype "passive") (tstamp 68d9af79-976e-490b-bf12-832c5e1f526c)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 313 "Net-(R35-Pad1)") (pintype "passive") (tstamp c2dd9471-8195-46af-8d86-93c89f201028)) + (net 303 "Net-(R35-Pad1)") (pintype "passive") (tstamp c2dd9471-8195-46af-8d86-93c89f201028)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -10268,7 +10316,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp 66f728da-d265-4ade-a71e-5eecc91dc965) - (at 114.912 71.12) + (at 108.458 71.12) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -10296,7 +10344,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 674fca1d-64ab-4803-a67e-45402d128b72) - (at 173.99 86.106 -90) + (at 176.784 93.726 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -10326,10 +10374,10 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 0f7e47f4-11ac-412c-9ab3-703bd66e433b)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 33c7c5c4-5568-498b-ad23-a26397406ec2)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 9d6abe2d-518f-4085-a942-b7e90848fa68)) - (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 36dedf35-22a6-4bb1-ad18-78e93ea44b57)) - (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 320 "Net-(R111-Pad2)") (pintype "passive") (tstamp 66f860f6-f658-4272-bead-7ac0daaffb12)) + (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 310 "Net-(R111-Pad2)") (pintype "passive") (tstamp 66f860f6-f658-4272-bead-7ac0daaffb12)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -10339,7 +10387,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 67b4b56f-044f-439b-bfa4-7033a069f1f2) - (at 102.362 34.29 180) + (at 105.156 33.528 180) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "") @@ -10383,7 +10431,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 68ef0e84-0693-44ac-86bc-e43d628ae85f) - (at 170.688 93.218 -90) + (at 175.006 93.726 -90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -10414,7 +10462,7 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 79107dfe-c19b-4125-bb27-21cdf13f5162)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp e7c865ac-fcfd-4bdc-a01a-3e52b093a308)) (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 320 "Net-(R111-Pad2)") (pintype "passive") (tstamp 22afd777-a2e2-4d8d-9615-15619c73c94c)) + (net 310 "Net-(R111-Pad2)") (pintype "passive") (tstamp 22afd777-a2e2-4d8d-9615-15619c73c94c)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 115 "Net-(C109-Pad2)") (pintype "passive") (tstamp 9de0cff8-7452-4d1a-a738-fd07873ecbe2)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -10426,7 +10474,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 69719fde-f602-4a2e-8187-82dde5d29328) - (at 148.545 223.301) + (at 136.144 185.928 -90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -10434,15 +10482,15 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-000060629fb5") (attr smd) - (fp_text reference "R141" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R141" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 18eedb33-fe18-4e84-89d2-57163ee71145) ) - (fp_text value "1.8k" (at 0 1.43) (layer "F.Fab") + (fp_text value "1.8k" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp bbddb724-bdad-400c-ad69-68800eaa0bb5) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 2af20b9d-a9b6-40e4-b4b2-f47ad824cc16) ) @@ -10456,10 +10504,10 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 3f41bee6-8c46-423f-9352-4e38396e26cc)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 44fa451a-cdc0-4b2d-9a05-8e5e345b915d)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp e837a91a-e32c-4225-b943-a4daa51e97fb)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp e2c7be2e-fec7-42c7-b910-3a1c89400621)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 322 "Net-(R140-Pad1)") (pintype "passive") (tstamp ea5cdc13-06e2-4e5c-9c6b-7caba8d7f2b7)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 311 "Net-(R140-Pad1)") (pintype "passive") (tstamp ea5cdc13-06e2-4e5c-9c6b-7caba8d7f2b7)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -10467,9 +10515,37 @@ ) ) + (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") + (tedit 56D1B4CB) (tstamp 69e386ae-2c16-45d3-8a85-c6e2d73c375c) + (at 139.7 78.755) + (descr "Mounting Hole 3.2mm, M3, DIN965") + (tags "mounting hole 3.2mm m3 din965") + (property "Need_order" "0") + (property "Sheetfile" "pa_70.kicad_sch") + (property "Sheetname" "PA 70MHz") + (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/2599cc01-2542-4cb2-8dfa-21fe54407460") + (attr exclude_from_pos_files) + (fp_text reference "H37" (at 0 -3.8) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 0328ddcf-1e61-4555-83cb-a323d7b88944) + ) + (fp_text value "M3" (at 0 3.8) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 42f058ee-51ba-4692-abbb-8b75239045d7) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 854ccb56-1554-4110-9a70-fd930c53e032) + ) + (fp_circle (center 0 0) (end 2.8 0) (layer "Cmts.User") (width 0.15) (fill none) (tstamp f9b437c2-1f0d-4f1e-82d9-fe1824406e39)) + (fp_circle (center 0 0) (end 3.05 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp 686b73f9-ba0b-4355-a4db-754740a9964d)) + (pad "1" thru_hole circle (at 0 0) (size 5.6 5.6) (drill 3.2) (layers *.Cu *.Mask) + (net 2 "GND") (pinfunction "1") (pintype "input") (tstamp 896ff2aa-a979-4690-b714-4ab062eeafcc)) + ) + (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 6a2b896d-58df-459d-bb68-c612af2b4445) - (at 110.998 56.388) + (at 104.544 56.388) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -10500,9 +10576,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp cd278e5b-4bc0-4c86-8eac-f1eb37fe57e3)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e0032ebe-5a20-4556-b8ae-e83ff60659d9)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 281 "Net-(L19-Pad1)") (pintype "passive") (tstamp 20de69b1-4459-4026-8762-5400c20e2a48)) + (net 272 "Net-(L19-Pad1)") (pintype "passive") (tstamp 20de69b1-4459-4026-8762-5400c20e2a48)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 251 "/Baseband/VHF_OUT") (pintype "passive") (tstamp cfb9ac05-bf0e-4848-b38e-348012d98ec8)) + (net 244 "/Baseband/VHF_OUT") (pintype "passive") (tstamp cfb9ac05-bf0e-4848-b38e-348012d98ec8)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -10510,54 +10586,6 @@ ) ) - (footprint "Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical" (layer "F.Cu") - (tedit 59FED5CC) (tstamp 6a486762-d45a-4fef-9737-8c5929172da2) - (at 140.97 61.463) - (descr "Through hole straight pin header, 1x02, 2.54mm pitch, single row") - (tags "Through hole pin header THT 1x02 2.54mm single row") - (property "Need_order" "0") - (property "Sheetfile" "kicad-dart-70.kicad_sch") - (property "Sheetname" "") - (path "/288e6461-32fb-4d6b-818d-a1667b7430ca") - (attr through_hole) - (fp_text reference "J19" (at 0 -2.33) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp a77332a9-26ac-4ca8-a459-1e81efdba610) - ) - (fp_text value "TX from PA" (at 0 4.87) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 0fd61b1b-a24a-4ad6-a97a-00c8222ae4d5) - ) - (fp_text user "${REFERENCE}" (at 0 1.27 90) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp e5cbfbab-55c7-4449-8d37-51f4c55d83c6) - ) - (fp_line (start -1.33 0) (end -1.33 -1.33) (layer "F.SilkS") (width 0.12) (tstamp 427fd671-3c57-4850-8c1b-29c941ef2f34)) - (fp_line (start -1.33 3.87) (end 1.33 3.87) (layer "F.SilkS") (width 0.12) (tstamp 463a3465-bdb5-4302-a7ed-e08610327b56)) - (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer "F.SilkS") (width 0.12) (tstamp 985f3433-5f9d-4f6a-84f0-30d4ad4b67fe)) - (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer "F.SilkS") (width 0.12) (tstamp a389d284-eee4-4ca7-bbb9-cd7ecf9ebc3f)) - (fp_line (start 1.33 1.27) (end 1.33 3.87) (layer "F.SilkS") (width 0.12) (tstamp a727cf57-2f45-45bf-a841-bdbf5c626c75)) - (fp_line (start -1.33 1.27) (end -1.33 3.87) (layer "F.SilkS") (width 0.12) (tstamp d9e2d993-adb6-4e57-8e5f-8254ecd9c8b2)) - (fp_line (start -1.8 4.35) (end 1.8 4.35) (layer "F.CrtYd") (width 0.05) (tstamp 40856d2a-ec04-408b-a07f-bfb4445b4927)) - (fp_line (start -1.8 -1.8) (end -1.8 4.35) (layer "F.CrtYd") (width 0.05) (tstamp b1e44ece-4c5d-4d3f-9d66-c35efb8198a0)) - (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp d882dec4-1156-4fed-bb01-56436b93e4aa)) - (fp_line (start 1.8 4.35) (end 1.8 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp e405eba5-b98c-4738-820e-b7e826024387)) - (fp_line (start 1.27 -1.27) (end 1.27 3.81) (layer "F.Fab") (width 0.1) (tstamp 21a7030f-0f40-43e5-b7f0-cb8fa7fc7bc7)) - (fp_line (start 1.27 3.81) (end -1.27 3.81) (layer "F.Fab") (width 0.1) (tstamp a0612c26-632d-4c11-878a-cd7944243689)) - (fp_line (start -1.27 3.81) (end -1.27 -0.635) (layer "F.Fab") (width 0.1) (tstamp cf8d6e41-e3fd-4617-943c-4b4e5859942b)) - (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp d35686d3-2043-46e8-85fd-1f3748a56dd4)) - (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp d784e9d6-8b73-40f7-adf5-57738062b561)) - (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 167 "Net-(D2-Pad1)") (pinfunction "In") (pintype "passive") (tstamp 0d5bf384-751e-4694-9686-db540a50da29)) - (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "Ext") (pintype "passive") (tstamp 36dbce38-b001-41f9-a446-65f955bc974b)) - (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 6abcc40e-15fd-452e-b20b-8dbf491b271f) (at 83.7195 45.72 -90) @@ -10591,7 +10619,7 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 723abcb6-7f74-4577-91da-c6ce20391ce5)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp dd134781-b374-404e-a2fa-67242f51ba13)) (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 254 "/CLK1") (pintype "passive") (tstamp 03b6104a-3618-4801-9332-090570a6b2ff)) + (net 245 "/CLK1") (pintype "passive") (tstamp 03b6104a-3618-4801-9332-090570a6b2ff)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp a5651898-5518-4d2a-ad70-6526107a592d)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -10639,7 +10667,7 @@ (fp_line (start 1.27 3.81) (end -1.27 3.81) (layer "F.Fab") (width 0.1) (tstamp 9f401745-7987-4a65-8a3d-74aa01f812ef)) (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp c4390774-420f-4e08-bbf4-f83af30077bc)) (pad "1" thru_hole rect (at 0 0 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 254 "/CLK1") (pinfunction "Pin_1") (pintype "passive") (tstamp a7a5bf32-0d47-416f-9a46-bc0518890cb3)) + (net 245 "/CLK1") (pinfunction "Pin_1") (pintype "passive") (tstamp a7a5bf32-0d47-416f-9a46-bc0518890cb3)) (pad "2" thru_hole oval (at 0 2.54 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_2") (pintype "passive") (tstamp e5e174bd-b7d7-4592-96e6-0ed87c1d0780)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl" @@ -10651,7 +10679,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 6d815c9a-6553-42c4-b50c-d7f680ff09bb) - (at 101.346 29.464 90) + (at 104.14 28.702 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -10694,7 +10722,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 6d989b5d-e42d-4c95-ab21-c8649348d8ac) - (at 165.608 92.456 180) + (at 166.878 92.456 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -10775,19 +10803,19 @@ (fp_line (start 1.5 -1.5) (end 1.5 1.5) (layer "F.Fab") (width 0.15) (tstamp 80e522ab-6066-4cbf-b845-bf5d903a5a4c)) (fp_line (start -1.5 -0.5) (end -0.5 -1.5) (layer "F.Fab") (width 0.15) (tstamp f8410997-79e2-4125-bbae-9e709637d692)) (pad "1" smd rect (at -2.2 -1) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") - (net 350 "/+3V3_CLK") (pinfunction "VDD") (pintype "power_in") (tstamp 2118622a-b142-45bc-95a6-8e329a88ba8b)) + (net 339 "/+3V3_CLK") (pinfunction "VDD") (pintype "power_in") (tstamp 2118622a-b142-45bc-95a6-8e329a88ba8b)) (pad "2" smd rect (at -2.2 -0.5) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 11 "Net-(C11-Pad2)") (pinfunction "XA") (pintype "input") (tstamp 3b50857f-37b6-4da0-a881-caeb7c7dcca3)) (pad "3" smd rect (at -2.2 0) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") - (net 349 "Net-(U4-Pad3)") (pinfunction "XB") (pintype "input") (tstamp 62e365c8-09df-4fe0-ae0b-3243d3f2e3d4)) + (net 338 "Net-(U4-Pad3)") (pinfunction "XB") (pintype "input") (tstamp 62e365c8-09df-4fe0-ae0b-3243d3f2e3d4)) (pad "4" smd rect (at -2.2 0.5) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") - (net 248 "/SCL") (pinfunction "SCL") (pintype "input") (tstamp 35ef58c8-fd64-4037-b006-1848f2baae6f)) + (net 241 "/SCL") (pinfunction "SCL") (pintype "input") (tstamp 35ef58c8-fd64-4037-b006-1848f2baae6f)) (pad "5" smd rect (at -2.2 1) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") - (net 247 "/SDA") (pinfunction "SDA") (pintype "bidirectional") (tstamp acc42e1f-574d-4404-adba-a21811e58c60)) + (net 240 "/SDA") (pinfunction "SDA") (pintype "bidirectional") (tstamp acc42e1f-574d-4404-adba-a21811e58c60)) (pad "6" smd rect (at 2.2 1) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 14 "Net-(C15-Pad1)") (pinfunction "CLK2") (pintype "output") (tstamp fd0c647a-7862-4060-b31b-fcb6694407fd)) (pad "7" smd rect (at 2.2 0.5) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") - (net 350 "/+3V3_CLK") (pinfunction "VDDO") (pintype "power_in") (tstamp 644af57c-b42f-4eb5-97fa-fcf00cbaa093)) + (net 339 "/+3V3_CLK") (pinfunction "VDDO") (pintype "power_in") (tstamp 644af57c-b42f-4eb5-97fa-fcf00cbaa093)) (pad "8" smd rect (at 2.2 0) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "GND") (pintype "power_in") (tstamp f8da1869-94f1-459b-8a37-e878fbecd2cd)) (pad "9" smd rect (at 2.2 -0.5) (size 1.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") @@ -10853,13 +10881,13 @@ (pad "" np_thru_hole circle (at 0 4.5 270) (size 1.7 1.7) (drill 1.7) (layers *.Cu *.Mask) (tstamp 7171d7a4-94b9-4d32-9cbe-bbed43ca980d)) (pad "" np_thru_hole circle (at 0 -2.5 270) (size 1.7 1.7) (drill 1.7) (layers *.Cu *.Mask) (tstamp dd13e2eb-ba7d-4803-9170-a795b61aa3c0)) (pad "R" smd rect (at 3.7 -1.6 270) (size 2.8 2.2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 220 "/CW_RING") (pintype "passive") (tstamp 9a83c883-2c55-4aee-8419-40dd25f5ee7b)) + (net 213 "/CW_RING") (pintype "passive") (tstamp 9a83c883-2c55-4aee-8419-40dd25f5ee7b)) (pad "S" smd rect (at -3.7 -3.6 270) (size 2.8 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pintype "passive") (tstamp 65f948bf-20bd-4d66-8950-bc2f74cebf25)) (pad "T" smd rect (at -3.7 5.8 270) (size 2.8 2.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 221 "/CW_TIP") (pintype "passive") (tstamp 7051a759-0509-4b67-b4c7-21e103d29c6f)) + (net 214 "/CW_TIP") (pintype "passive") (tstamp 7051a759-0509-4b67-b4c7-21e103d29c6f)) (pad "TN" smd rect (at 0.75 9.8 270) (size 2.8 2.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 222 "unconnected-(J5-PadTN)") (pintype "passive+no_connect") (tstamp fae3c186-3679-45c0-beeb-c3ffbd991705)) + (net 215 "unconnected-(J5-PadTN)") (pintype "passive+no_connect") (tstamp fae3c186-3679-45c0-beeb-c3ffbd991705)) (model "${KICAD6_3DMODEL_DIR}/Connector_Audio.3dshapes/Jack_3.5mm_CUI_SJ-3524-SMT_Horizontal.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -10910,7 +10938,7 @@ (fp_line (start -2.5 -1.5) (end -2.4 -1.6) (layer "F.Fab") (width 0.1) (tstamp a4722702-8181-4789-84de-030a891c5fbf)) (fp_line (start -2.4 1.6) (end -2.5 1.5) (layer "F.Fab") (width 0.1) (tstamp fddc72ac-60b0-45bc-85c0-375acf026446)) (pad "1" smd rect locked (at -1.15 0.925) (size 1.3 1.05) (layers "F.Cu" "F.Paste" "F.Mask") - (net 349 "Net-(U4-Pad3)") (pinfunction "1") (pintype "passive") (tstamp 7c1f8c20-bab9-40b3-aa07-257f7feec588)) + (net 338 "Net-(U4-Pad3)") (pinfunction "1") (pintype "passive") (tstamp 7c1f8c20-bab9-40b3-aa07-257f7feec588)) (pad "2" smd rect locked (at 1.15 0.925) (size 1.3 1.05) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp fcc34a11-1d64-4a50-864c-a523f002426b)) (pad "3" smd rect locked (at 1.15 -0.925) (size 1.3 1.05) (layers "F.Cu" "F.Paste" "F.Mask") @@ -10924,65 +10952,6 @@ ) ) - (footprint "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" (layer "F.Cu") - (tedit 5D9F72B1) (tstamp 6ea4f638-99aa-4c1f-950e-3b9445240cef) - (at 133.675 209.511) - (descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") - (tags "SOIC SO") - (property "MPN" "IRF7309TRPBF") - (property "Need_order" "0") - (property "Sheetfile" "pa_70.kicad_sch") - (property "Sheetname" "PA 70MHz") - (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/2f00fa5d-a893-47cc-913a-33720bf0360e") - (attr smd) - (fp_text reference "Q30" (at 0 -3.4) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 87830a2c-2004-43c9-a4f9-890ee049a2f9) - ) - (fp_text value "IRF7309" (at 0 3.4) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp a23a78fe-2e71-4a66-87e7-3db188b0235f) - ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 0.98 0.98) (thickness 0.15))) - (tstamp 6fd585b3-4a97-4995-a8e3-913344d43194) - ) - (fp_line (start 0 2.56) (end -1.95 2.56) (layer "F.SilkS") (width 0.12) (tstamp 25861221-ea56-4f37-a39a-62571ac4be80)) - (fp_line (start 0 -2.56) (end -3.45 -2.56) (layer "F.SilkS") (width 0.12) (tstamp 2ae1d34b-248f-480a-8c56-d0cb953bfd8a)) - (fp_line (start 0 -2.56) (end 1.95 -2.56) (layer "F.SilkS") (width 0.12) (tstamp cc5e8344-2a0e-4f75-83e2-bd2e7dd7ee1a)) - (fp_line (start 0 2.56) (end 1.95 2.56) (layer "F.SilkS") (width 0.12) (tstamp e2971a5d-9520-4a20-b95f-cf544fff86a4)) - (fp_line (start -3.7 2.7) (end 3.7 2.7) (layer "F.CrtYd") (width 0.05) (tstamp 1fff52d0-39a1-4516-a0da-51da83dfcf6d)) - (fp_line (start 3.7 -2.7) (end -3.7 -2.7) (layer "F.CrtYd") (width 0.05) (tstamp 911503d9-0e11-421f-9666-42fed80432c0)) - (fp_line (start -3.7 -2.7) (end -3.7 2.7) (layer "F.CrtYd") (width 0.05) (tstamp d23fcb0b-234a-487f-9c09-e65e4f280cb7)) - (fp_line (start 3.7 2.7) (end 3.7 -2.7) (layer "F.CrtYd") (width 0.05) (tstamp f3119af0-9a99-46ea-8c10-8432ec2b9d27)) - (fp_line (start 1.95 2.45) (end -1.95 2.45) (layer "F.Fab") (width 0.1) (tstamp 04b95058-68b5-4cf8-9d09-346ddc024b74)) - (fp_line (start -1.95 -1.475) (end -0.975 -2.45) (layer "F.Fab") (width 0.1) (tstamp 2647d72a-18a9-4100-9397-fd4d72bc1947)) - (fp_line (start -0.975 -2.45) (end 1.95 -2.45) (layer "F.Fab") (width 0.1) (tstamp 7184d2ed-5ef9-4498-9bc8-c0e1bff6c92a)) - (fp_line (start 1.95 -2.45) (end 1.95 2.45) (layer "F.Fab") (width 0.1) (tstamp 956e6c07-6756-4b35-bf95-7ce7b5e4e0e1)) - (fp_line (start -1.95 2.45) (end -1.95 -1.475) (layer "F.Fab") (width 0.1) (tstamp e33bb2ef-9634-4018-bdfc-4d13bc1a6dc3)) - (pad "1" smd roundrect (at -2.475 -1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 2 "GND") (pinfunction "S") (pintype "passive") (tstamp 4e8b7086-e230-4068-b1b8-bc26b2bace6d)) - (pad "2" smd roundrect (at -2.475 -0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 253 "/PA 70MHz/EN_PA") (pinfunction "G") (pintype "input") (tstamp 758559d6-b732-4cba-a3e9-5a1a85ae0c09)) - (pad "3" smd roundrect (at -2.475 0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 135 "/PA 70MHz/12V") (pinfunction "1") (pintype "passive") (tstamp 45293af2-ce57-4af4-9ef2-50292a4af267)) - (pad "4" smd roundrect (at -2.475 1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 307 "Net-(Q30-Pad4)") (pinfunction "G") (pintype "input") (tstamp 4f98e5f0-0410-410c-9078-1bcf9a64a49c)) - (pad "5" smd roundrect (at 2.475 1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 244 "Net-(Q30-Pad5)") (pinfunction "D") (pintype "passive") (tstamp fae91440-3a3e-4140-8d27-bc4e347625b0)) - (pad "6" smd roundrect (at 2.475 0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 244 "Net-(Q30-Pad5)") (pinfunction "D") (pintype "passive") (tstamp ed940257-c3d7-4894-99bf-b6167f7289eb)) - (pad "7" smd roundrect (at 2.475 -0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 307 "Net-(Q30-Pad4)") (pinfunction "D") (pintype "passive") (tstamp bea76b18-bd68-405d-a33c-fedd9cde0140)) - (pad "8" smd roundrect (at 2.475 -1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 307 "Net-(Q30-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 39f8213b-b0be-445e-875e-bb44b6bd5525)) - (model "${KICAD6_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp 6fb4c2ac-4659-4f2d-8a3d-b17750805511) (at 119.5 96.5) @@ -11013,7 +10982,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 6fe2501f-b1cc-4167-85a2-c1f8e3cdb2c3) - (at 175.514 95.25 180) + (at 170.18 95.25 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -11021,15 +10990,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/f5831d0e-0f03-47ce-9bb4-db393b7d7f29") (attr smd) - (fp_text reference "R114" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R114" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp d576decb-6282-4295-a62a-9f6ed82dca17) ) - (fp_text value "100" (at 0 1.43) (layer "F.Fab") + (fp_text value "100" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp ae404599-ba57-44ae-b355-6a57a6642016) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 6e3ca00c-f0f8-4ca3-bacc-4cafe559bc1b) ) @@ -11043,9 +11012,9 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 4f2ce26e-be73-45c0-8185-838ed3def376)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c4fed199-61de-4308-8a56-faf7408bad41)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp def0b41c-4fad-418e-bfae-8d004ca86651)) - (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 306 "/70MHz VHF Frontend/+VRX_FE") (pintype "passive") (tstamp fe3cc6a1-be61-4d98-ac72-351f02ca0a05)) - (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 296 "/70MHz VHF Frontend/+VRX_FE") (pintype "passive") (tstamp fe3cc6a1-be61-4d98-ac72-351f02ca0a05)) + (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 115 "Net-(C109-Pad2)") (pintype "passive") (tstamp d0432e1e-f00f-41ce-8506-88a3911ae62d)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) @@ -11056,7 +11025,7 @@ (footprint "mpb:two_2mm_pads_for_diode" (layer "F.Cu") (tedit 5FBA90BC) (tstamp 701ecd40-02f8-4ed5-9b2a-33c758275547) - (at 108.175 230.626) + (at 153.924 149.606 180) (property "MPN" "") (property "Need_order" "") (property "Sheetfile" "pa_70.kicad_sch") @@ -11073,92 +11042,10 @@ ) (fp_line (start -1 -2.75) (end 1 -2.75) (layer "F.SilkS") (width 0.15) (tstamp 07801bd0-7970-4778-88a0-4713626c9538)) (fp_line (start -1 -2.85) (end 1 -2.85) (layer "F.SilkS") (width 0.15) (tstamp 0c8ab067-1f18-4c86-847f-609fe477a7d7)) - (pad "1" smd rect locked (at 0 -4) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") + (pad "1" smd rect locked (at 0 -4 180) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "K") (pintype "passive") (tstamp 9408a3ae-b5a1-4ec0-8429-ef5f84866750)) - (pad "2" smd rect locked (at 0 4) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 352 "Net-(D22-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 5e268966-b7fd-4d9c-9cf3-b4b0f11d9911)) - ) - - (footprint "TestPoint:TestPoint_Pad_4.0x4.0mm" (layer "F.Cu") - (tedit 5A0F774F) (tstamp 70f71505-ec7a-43b2-b3ac-2f0f5c1bca5d) - (at 151.175 205.301) - (descr "SMD rectangular pad as test Point, square 4.0mm side length") - (tags "test point SMD pad rectangle square") - (property "Need_order" "0") - (property "Sheetfile" "pa_70.kicad_sch") - (property "Sheetname" "PA 70MHz") - (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-0000606f2464") - (attr exclude_from_pos_files) - (fp_text reference "J29" (at 0 -2.898) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp e6e2cb0a-7b83-4735-9e5b-4bb454952e1e) - ) - (fp_text value "5V VG" (at 0 3.1) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp cbc080e2-012d-41d3-84e8-bb5bc09240a9) - ) - (fp_text user "${REFERENCE}" (at 0 -2.9) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 224dfb2f-5ed4-4ceb-83f4-76aecf724f01) - ) - (fp_line (start -2.2 -2.2) (end 2.2 -2.2) (layer "F.SilkS") (width 0.12) (tstamp 031a9d87-fce8-4a5f-a52d-255f168507c2)) - (fp_line (start -2.2 2.2) (end -2.2 -2.2) (layer "F.SilkS") (width 0.12) (tstamp 1f18bdf0-d83b-41a8-9eb8-e57c36651843)) - (fp_line (start 2.2 2.2) (end -2.2 2.2) (layer "F.SilkS") (width 0.12) (tstamp 4e3e87be-cb43-44e6-9a34-71ea2e30af95)) - (fp_line (start 2.2 -2.2) (end 2.2 2.2) (layer "F.SilkS") (width 0.12) (tstamp 89e6e44a-5555-4d2e-84c8-80663431613a)) - (fp_line (start -2.5 -2.5) (end -2.5 2.5) (layer "F.CrtYd") (width 0.05) (tstamp 16a42ce5-fcba-4bb2-a54f-4e0195603438)) - (fp_line (start 2.5 2.5) (end -2.5 2.5) (layer "F.CrtYd") (width 0.05) (tstamp 38c9ae98-2cce-45dd-a416-665b84117ece)) - (fp_line (start -2.5 -2.5) (end 2.5 -2.5) (layer "F.CrtYd") (width 0.05) (tstamp 3982cf8a-31ce-4941-b3f2-96cc79a83fa1)) - (fp_line (start 2.5 2.5) (end 2.5 -2.5) (layer "F.CrtYd") (width 0.05) (tstamp 86f15398-5b39-4d1b-8876-b3d22d7a77ec)) - (pad "1" smd rect (at 0 0) (size 4 4) (layers "F.Cu" "F.Mask") - (net 154 "Net-(C161-Pad2)") (pinfunction "Pin_1") (pintype "passive") (tstamp 0a88780b-56a3-413d-baba-1921701bbcf0)) - ) - - (footprint "Package_TO_SOT_SMD:SOT-23_Handsoldering" (layer "F.Cu") - (tedit 5A0AB76C) (tstamp 715429a3-62d6-4fcf-afd2-9ea257d49cc5) - (at -80.41 86.616) - (descr "SOT-23, Handsoldering") - (tags "SOT-23") - (property "MPN" "BAT18") - (property "Need_order" "0") - (property "Sheetfile" "kicad-dart-70.kicad_sch") - (property "Sheetname" "") - (path "/44651983-c74d-455f-b39b-9847dd5356f1") - (attr smd) - (fp_text reference "D1" (at 0 -2.5) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 9f73a828-814b-4a1e-8c3c-5b8f841c12ee) - ) - (fp_text value "BAT18" (at 0 2.5) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 9e5bc0b4-1246-4737-8e06-3344ecab2716) - ) - (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") - (effects (font (size 0.5 0.5) (thickness 0.075))) - (tstamp af6464c1-fc9c-4118-84dd-ee55711de68c) - ) - (fp_line (start 0.76 1.58) (end -0.7 1.58) (layer "F.SilkS") (width 0.12) (tstamp 44ae726f-fccb-46ba-a32f-bd9da4422e3b)) - (fp_line (start 0.76 -1.58) (end -2.4 -1.58) (layer "F.SilkS") (width 0.12) (tstamp 9509cb1a-4b2f-47ff-81b8-a53683b824d8)) - (fp_line (start 0.76 1.58) (end 0.76 0.65) (layer "F.SilkS") (width 0.12) (tstamp a9a434d9-b4e6-4efc-b58c-5e75e2a333a4)) - (fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer "F.SilkS") (width 0.12) (tstamp de780f9a-6f08-4872-88cd-d6026149bf98)) - (fp_line (start -2.7 -1.75) (end 2.7 -1.75) (layer "F.CrtYd") (width 0.05) (tstamp 298e07d9-9421-4258-adfd-b418e05629f3)) - (fp_line (start 2.7 -1.75) (end 2.7 1.75) (layer "F.CrtYd") (width 0.05) (tstamp 30b49800-0abf-4f30-bcd4-2e514bf2f37b)) - (fp_line (start 2.7 1.75) (end -2.7 1.75) (layer "F.CrtYd") (width 0.05) (tstamp 356c6c53-1541-4f52-aef7-2b5d0f11d18f)) - (fp_line (start -2.7 1.75) (end -2.7 -1.75) (layer "F.CrtYd") (width 0.05) (tstamp 9710c5b0-3667-4d4b-b195-79b941b42223)) - (fp_line (start -0.15 -1.52) (end 0.7 -1.52) (layer "F.Fab") (width 0.1) (tstamp 0c905fe6-eb63-4d6c-8199-006317beb98d)) - (fp_line (start -0.7 1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp 5cb57aeb-e95c-4889-971b-8d18ecacb6aa)) - (fp_line (start -0.7 -0.95) (end -0.15 -1.52) (layer "F.Fab") (width 0.1) (tstamp 5e434e6e-afdf-4464-8edb-5f2452b80f4e)) - (fp_line (start -0.7 -0.95) (end -0.7 1.5) (layer "F.Fab") (width 0.1) (tstamp 9aefac67-cb0a-4fde-823f-c9abadaa682f)) - (fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp d4da0d5b-9edd-44d4-add0-47edfaf652bf)) - (pad "1" smd rect (at -1.5 -0.95) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 354 "Net-(D1-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 56dbd49d-f837-49a1-a1f0-a12010bb7e38)) - (pad "2" smd rect (at -1.5 0.95) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp 30a53677-4774-4034-b9b6-a952e29af731)) - (pad "3" smd rect (at 1.5 0) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 19 "Net-(C17-Pad2)") (pinfunction "K") (pintype "passive") (tstamp 9335b707-f426-4457-bdcf-cac94759e614)) - (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) + (pad "2" smd rect locked (at 0 4 180) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") + (net 341 "Net-(D22-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 5e268966-b7fd-4d9c-9cf3-b4b0f11d9911)) ) (footprint "Package_TO_SOT_SMD:SOT-23" (layer "F.Cu") @@ -11198,7 +11085,7 @@ (fp_line (start -0.65 1.45) (end -0.65 -1.125) (layer "F.Fab") (width 0.1) (tstamp 101d5734-a534-46e8-9325-64a96716a9ad)) (fp_line (start -0.65 -1.125) (end -0.325 -1.45) (layer "F.Fab") (width 0.1) (tstamp 7d338af1-8851-40dd-b27e-6a7aa7db9eb8)) (pad "1" smd roundrect (at -0.9375 -0.95 180) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 292 "Net-(Q7-Pad1)") (pinfunction "B") (pintype "input") (tstamp 889836ca-39e2-498a-9189-6fdd630958a8)) + (net 282 "Net-(Q7-Pad1)") (pinfunction "B") (pintype "input") (tstamp 889836ca-39e2-498a-9189-6fdd630958a8)) (pad "2" smd roundrect (at -0.9375 0.95 180) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "E") (pintype "passive") (tstamp aff399f1-48d2-4caf-9202-84d008cfe175)) (pad "3" smd roundrect (at 0.9375 0 180) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) @@ -11210,49 +11097,6 @@ ) ) - (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") - (tedit 5F68FEEE) (tstamp 7335f41f-5d03-45ca-9ee2-39af3facabc3) - (at 173.285 196.381) - (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") - (tags "resistor handsolder") - (property "Need_order" "0") - (property "Sheetfile" "pa_70.kicad_sch") - (property "Sheetname" "PA 70MHz") - (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/d4212123-0342-480c-b986-6eb3c720f63a") - (attr smd) - (fp_text reference "R154" (at 0 -1.43) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 66e4083d-4bc0-44ef-9b6f-8cab58425ba0) - ) - (fp_text value "12k" (at 0 1.43) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 7d80416d-02db-48ab-80c1-6c08afedadee) - ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 0.4 0.4) (thickness 0.06))) - (tstamp a3e0512c-9d42-491d-a96a-36b2ba4b4798) - ) - (fp_line (start -0.254724 0.5225) (end 0.254724 0.5225) (layer "F.SilkS") (width 0.12) (tstamp 361d881c-e33c-4a7b-83dd-40d7faedd61b)) - (fp_line (start -0.254724 -0.5225) (end 0.254724 -0.5225) (layer "F.SilkS") (width 0.12) (tstamp 88a45417-5349-456d-99e0-5347607f9d80)) - (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp 45832468-a7e9-4ba0-aa8e-c0c6cd177d10)) - (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer "F.CrtYd") (width 0.05) (tstamp 4c5757c9-a623-4a32-b052-0c235e62097c)) - (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer "F.CrtYd") (width 0.05) (tstamp 8ef08f04-b808-4084-b76f-d437a30c7a81)) - (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp d5501adc-dbf5-4295-b4ce-46cf54a46073)) - (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 35e674f8-0315-4380-b564-19b437ac24a7)) - (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 61cf6f2c-9cf0-4d98-9681-c2c4ba40fabf)) - (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 6eab9cbc-0b19-4a5d-a0b4-d5e5f5a7e649)) - (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 846ff0fe-b2d3-44c2-bd24-854c3df26c08)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 135 "/PA 70MHz/12V") (pintype "passive") (tstamp 2c79c5b2-fcdd-4af5-8ffc-0cffb51511a6)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 307 "Net-(Q30-Pad4)") (pintype "passive") (tstamp a61da465-f15f-447b-8281-d3af4253eac2)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 73fa3d47-933b-455f-98bd-c5a65b2c506c) (at 86.36 56.134 -90) @@ -11333,11 +11177,11 @@ (pad "1" smd rect (at -1.59 -1.27 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "PR1") (pintype "passive") (clearance 0.2) (tstamp 682b3012-3ee0-4050-9c76-481d8d205767)) (pad "2" smd rect (at -1.59 0 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 344 "unconnected-(T5-Pad2)") (pinfunction "PM") (pintype "passive+no_connect") (clearance 0.2) (tstamp 7ad2718d-a0ce-4292-b6c9-3ebd3e0c6f32)) + (net 333 "unconnected-(T5-Pad2)") (pinfunction "PM") (pintype "passive+no_connect") (clearance 0.2) (tstamp 7ad2718d-a0ce-4292-b6c9-3ebd3e0c6f32)) (pad "3" smd rect (at -1.59 1.27 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 82 "Net-(C70-Pad2)") (pinfunction "PR2") (pintype "passive") (clearance 0.2) (tstamp 0370da26-0288-4f50-b3c8-3f33a63f8934)) (pad "4" smd rect (at 1.59 1.27 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 257 "Net-(J24-Pad2)") (pinfunction "S1") (pintype "passive") (clearance 0.2) (tstamp aa5eb22b-9ec5-405f-bf46-6204e5a7aae5)) + (net 248 "Net-(J24-Pad2)") (pinfunction "S1") (pintype "passive") (clearance 0.2) (tstamp aa5eb22b-9ec5-405f-bf46-6204e5a7aae5)) (pad "5" smd rect (at 1.59 0 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "S2") (pintype "passive") (clearance 0.2) (tstamp cda18b45-ae98-4bb3-a911-67cb820c898c)) (pad "6" smd rect (at 1.59 -1.27 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") @@ -11351,7 +11195,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 752e5f24-f0ec-4e98-a766-550596959a57) - (at 80.264 33.528) + (at 99.822 27.1565 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -11359,15 +11203,15 @@ (property "Sheetname" "Baseband") (path "/691ab6db-80d5-4c97-9e5f-aae234327d27/12be2bc4-69b1-41e1-b853-fa71c6fd8df3") (attr smd) - (fp_text reference "R106" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R106" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 02376595-6f09-48fa-aa6f-8bca3d734911) ) - (fp_text value "150" (at 0 1.43) (layer "F.Fab") + (fp_text value "150" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 24c3ca32-8644-4948-b6f5-df23037db776) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp abc64110-259c-45c0-ac1d-a133b1f819ed) ) @@ -11381,10 +11225,10 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 6a218e66-3ad7-4a5b-a0a6-c9263c4e828c)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp d4fdf264-7a10-4962-a4c7-a084c421323d)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp fd9af18c-ecd2-40a1-81c4-ec5ef91c9b08)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 5d87c621-8142-43c1-9891-808b58b45b4d)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 319 "Net-(R101-Pad1)") (pintype "passive") (tstamp 366fc60d-c270-4793-a239-800275405168)) + (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 309 "Net-(R101-Pad1)") (pintype "passive") (tstamp 366fc60d-c270-4793-a239-800275405168)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11394,7 +11238,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 75616da0-e9c1-48d9-a9c8-ddb6dc7894c9) - (at 161.375 203.391) + (at 159.004 142.24 180) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor") (property "MPN" "") @@ -11425,10 +11269,10 @@ (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp b62884b4-1d1a-4471-a2e6-242c30c4844b)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp c893a5f5-0f7e-491f-b6d6-cc0ddd1e7a62)) (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp ef5ac74f-dcc2-49a1-a2b6-2d7f5c05ed08)) - (pad "1" smd roundrect (at -0.95 0) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.95 0 180) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 7456e2c7-72ce-4fe5-b3d4-37487eea638b)) - (pad "2" smd roundrect (at 0.95 0) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 136 "VGG1") (pintype "passive") (tstamp 4fd0439b-a491-4622-82da-e3fe151b07a3)) + (pad "2" smd roundrect (at 0.95 0 180) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 134 "VGG1") (pintype "passive") (tstamp 4fd0439b-a491-4622-82da-e3fe151b07a3)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11438,7 +11282,7 @@ (footprint "mpb:two_2mm_pads_for_diode" (layer "F.Cu") (tedit 5FBA90BC) (tstamp 7602dc7f-fe5e-41c5-a219-fa0e39fc7cf4) - (at 105.025 230.626) + (at 133.096 149.606 180) (property "MPN" "") (property "Need_order" "") (property "Sheetfile" "pa_70.kicad_sch") @@ -11455,10 +11299,58 @@ ) (fp_line (start -1 -2.75) (end 1 -2.75) (layer "F.SilkS") (width 0.15) (tstamp 795f23e1-f8cd-499a-b83c-67121d26cfd9)) (fp_line (start -1 -2.85) (end 1 -2.85) (layer "F.SilkS") (width 0.15) (tstamp bd72c463-b7f7-4234-8df4-26021dff89ed)) - (pad "1" smd rect locked (at 0 -4) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") + (pad "1" smd rect locked (at 0 -4 180) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "K") (pintype "passive") (tstamp 9660426d-017f-499c-bacb-88b1b9f389a1)) - (pad "2" smd rect locked (at 0 4) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 191 "Net-(D21-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 72413058-e3f6-4e0f-94cb-6bfa8b065726)) + (pad "2" smd rect locked (at 0 4 180) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") + (net 185 "Net-(D21-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 72413058-e3f6-4e0f-94cb-6bfa8b065726)) + ) + + (footprint "Package_TO_SOT_SMD:SOT-23_Handsoldering" (layer "F.Cu") + (tedit 5A0AB76C) (tstamp 761c74aa-7361-44f3-9740-58b71f8d7ae2) + (at 121.412 81.788 180) + (descr "SOT-23, Handsoldering") + (tags "SOT-23") + (property "MPN" "BAT18") + (property "Need_order" "0") + (property "Sheetfile" "ant_switch.kicad_sch") + (property "Sheetname" "Antenna Switch") + (path "/2eb25ee2-d512-42fe-80f1-00400ed0a45e/9ad28677-58d4-4780-a7da-a89ffdca0138") + (attr smd) + (fp_text reference "D2" (at 0 -2.5) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 474d05bb-1561-4b7d-ab68-462fd354f8a8) + ) + (fp_text value "BAT18" (at 0 2.5) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 67dfa8be-12aa-44a1-9af7-9ba0b15b3a4d) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.075))) + (tstamp 99056a5b-4606-4a98-bae3-77e7a8cad2f1) + ) + (fp_line (start 0.76 1.58) (end 0.76 0.65) (layer "F.SilkS") (width 0.12) (tstamp 025b9ada-87ca-48c0-833a-37f361ee31aa)) + (fp_line (start 0.76 1.58) (end -0.7 1.58) (layer "F.SilkS") (width 0.12) (tstamp 6ade4cc2-56f5-4d18-8754-b6e93b02c4cf)) + (fp_line (start 0.76 -1.58) (end -2.4 -1.58) (layer "F.SilkS") (width 0.12) (tstamp c70fc53b-27d8-4fd2-85a9-50dcbdb2a391)) + (fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer "F.SilkS") (width 0.12) (tstamp e3a6d44d-36fe-4aff-b268-a31c88c0acd0)) + (fp_line (start 2.7 -1.75) (end 2.7 1.75) (layer "F.CrtYd") (width 0.05) (tstamp 3316ad33-db8f-46fd-88d0-b1662346d67e)) + (fp_line (start -2.7 -1.75) (end 2.7 -1.75) (layer "F.CrtYd") (width 0.05) (tstamp 9fa581a9-c946-4c42-b47d-d13ac0da543b)) + (fp_line (start -2.7 1.75) (end -2.7 -1.75) (layer "F.CrtYd") (width 0.05) (tstamp c32ba545-022e-4555-8643-15443046c366)) + (fp_line (start 2.7 1.75) (end -2.7 1.75) (layer "F.CrtYd") (width 0.05) (tstamp dc97aeda-0c46-48bb-b729-8ffe3b7fd6e7)) + (fp_line (start -0.7 -0.95) (end -0.7 1.5) (layer "F.Fab") (width 0.1) (tstamp 4e358580-c125-416f-ab27-00e1d8278ef2)) + (fp_line (start -0.7 -0.95) (end -0.15 -1.52) (layer "F.Fab") (width 0.1) (tstamp 51e795a7-57ae-45d7-a173-4b6a274a7857)) + (fp_line (start -0.7 1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp 6086bce8-b35e-4fda-b0f2-64ed786aa474)) + (fp_line (start -0.15 -1.52) (end 0.7 -1.52) (layer "F.Fab") (width 0.1) (tstamp 69db24c7-5a51-4f8e-8c69-3526d8652deb)) + (fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp b8404532-1778-43ef-bb4b-875ef69dd3f7)) + (pad "1" smd rect (at -1.5 -0.95 180) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") + (net 161 "Net-(C116-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 7b95a891-294a-4105-a340-57d2646f5166)) + (pad "2" smd rect (at -1.5 0.95 180) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp 66705906-b77b-41ef-be04-769a2f713f7d)) + (pad "3" smd rect (at 1.5 0 180) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") + (net 353 "Net-(C119-Pad1)") (pinfunction "K") (pintype "passive") (tstamp c60cdd3d-8b17-42d5-946a-1c04ee336c29)) + (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) ) (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") @@ -11524,7 +11416,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 87 "Net-(C74-Pad2)") (pintype "passive") (tstamp 096537f8-ccd3-4230-8e52-f726fe18282e)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 303 "Net-(Q21-Pad1)") (pintype "passive") (tstamp 3d35357b-5a9b-4d10-8886-840bb977702c)) + (net 293 "Net-(Q21-Pad1)") (pintype "passive") (tstamp 3d35357b-5a9b-4d10-8886-840bb977702c)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11534,7 +11426,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 77cbd15f-8c51-4774-8da3-887dc4b54649) - (at 141.495 229.071) + (at 151.13 146.431 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -11542,15 +11434,15 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-000060547736") (attr smd) - (fp_text reference "R149" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R149" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 6d697622-8de6-4b30-8769-6c1de6a4c986) ) - (fp_text value "0" (at 0 1.43) (layer "F.Fab") + (fp_text value "0" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 9e33ac09-c627-4909-b284-0c6259936a59) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 4f9ae2f0-bc4f-42e1-b1a6-61459be08951) ) @@ -11564,10 +11456,10 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 7f9e201e-f413-4c5c-8040-3effde9857f0)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 8ca9bb2f-5da9-456f-aaf5-ba92d511958a)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp d1d23ecd-3e0b-428d-b686-ea05f51f9547)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 285 "Net-(L39-Pad2)") (pintype "passive") (tstamp 92b83562-6e64-46ff-9ec6-a029fee3c419)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 140 "Net-(C143-Pad2)") (pintype "passive") (tstamp 44edbf35-4c66-449e-a340-4531da2759bd)) + (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 276 "Net-(L39-Pad2)") (pintype "passive") (tstamp 92b83562-6e64-46ff-9ec6-a029fee3c419)) + (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 138 "Net-(C143-Pad2)") (pintype "passive") (tstamp 44edbf35-4c66-449e-a340-4531da2759bd)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11577,7 +11469,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 78458581-3f57-4ea1-bf3c-b788d6a52cc3) - (at 139.435 226.311) + (at 143.51 130.048 180) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor") (property "Need_order" "0") @@ -11607,10 +11499,10 @@ (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 471f0e02-4aaa-4b73-8c31-7627e06fccf2)) (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 655bbf92-089e-44b1-9930-91d0816027ab)) (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp accfdb49-df87-4774-85e8-358cfb7bc88d)) - (pad "1" smd roundrect (at -0.95 0) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.95 0 180) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 333fe18f-3ec0-44e6-b1e2-f872be1731f3)) - (pad "2" smd roundrect (at 0.95 0) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 133 "Net-(C136-Pad1)") (pintype "passive") (tstamp 9338f839-5ddd-4648-bcb7-ebbb909aaa4c)) + (pad "2" smd roundrect (at 0.95 0 180) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 360 "Net-(C138-Pad2)") (pintype "passive") (tstamp 9338f839-5ddd-4648-bcb7-ebbb909aaa4c)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11620,7 +11512,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 78e0b9fa-de58-48f8-9cf6-dfbc825fa3d0) - (at -97.028 28.194 90) + (at -10.922 34.29 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -11653,7 +11545,7 @@ (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 9d45e7a4-8dff-4e22-bd65-b9eb9e5769ff)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 239 "/EN_VRX") (pintype "passive") (tstamp f3b1a489-0a03-4977-ab45-073c177127f2)) + (net 232 "/EN_VRX") (pintype "passive") (tstamp f3b1a489-0a03-4977-ab45-073c177127f2)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11744,15 +11636,15 @@ (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp a8a866e3-c07e-41f1-b5cc-8d0f1b525220)) (fp_line (start 1.27 11.43) (end -1.27 11.43) (layer "F.Fab") (width 0.1) (tstamp b9d4dacf-a054-4578-b310-c11d282a73a5)) (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 159 "/Control on separate board/3.3V_UI") (pinfunction "Pin_1") (pintype "passive") (tstamp 8bba83af-53c9-45e6-86cb-3be12a4d5db1)) + (net 153 "/Control on separate board/3.3V_UI") (pinfunction "Pin_1") (pintype "passive") (tstamp 8bba83af-53c9-45e6-86cb-3be12a4d5db1)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 275 "/Control on separate board/SWCLK") (pinfunction "Pin_2") (pintype "passive") (tstamp f6aa5bc6-1040-4b15-be44-3de7b8ba72fb)) + (net 266 "/Control on separate board/SWCLK") (pinfunction "Pin_2") (pintype "passive") (tstamp f6aa5bc6-1040-4b15-be44-3de7b8ba72fb)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_3") (pintype "passive") (tstamp 9574a8d3-a08b-43d5-b85c-3f25ed5f22f8)) (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 276 "/Control on separate board/SWDIO") (pinfunction "Pin_4") (pintype "passive") (tstamp e7454932-5a84-463b-859f-5f1f3e00b73d)) + (net 267 "/Control on separate board/SWDIO") (pinfunction "Pin_4") (pintype "passive") (tstamp e7454932-5a84-463b-859f-5f1f3e00b73d)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 277 "/Control on separate board/RESETn") (pinfunction "Pin_5") (pintype "passive") (tstamp 11d29440-8f32-4774-b9ad-977d081ce1e6)) + (net 268 "/Control on separate board/RESETn") (pinfunction "Pin_5") (pintype "passive") (tstamp 11d29440-8f32-4774-b9ad-977d081ce1e6)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x05_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11800,7 +11692,7 @@ (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 44 "Net-(C42-Pad1)") (pinfunction "Pin_1") (pintype "passive") (tstamp 62045955-853d-4d11-a021-1d97b7c6056c)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 255 "Net-(J22-Pad2)") (pinfunction "Pin_2") (pintype "passive") (tstamp 826495df-99ed-45aa-a9b4-80b233842c74)) + (net 246 "Net-(J22-Pad2)") (pinfunction "Pin_2") (pintype "passive") (tstamp 826495df-99ed-45aa-a9b4-80b233842c74)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11842,9 +11734,9 @@ (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 822036de-8e35-445f-b207-61ad217ebb61)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp e560d271-e57d-4911-be4e-27eebd5d1ec5)) (pad "1" smd roundrect (at -0.875 0 180) (size 1.05 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 163 "Net-(C173-Pad2)") (pintype "passive") (tstamp 47f6e25e-1442-4d6f-bc58-b48fa3c6303d)) + (net 157 "Net-(C173-Pad2)") (pintype "passive") (tstamp 47f6e25e-1442-4d6f-bc58-b48fa3c6303d)) (pad "2" smd roundrect (at 0.875 0 180) (size 1.05 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 1e0fd6c3-b78c-49d3-b633-e7011d7db996)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 1e0fd6c3-b78c-49d3-b633-e7011d7db996)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11854,7 +11746,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 7bd3dbb4-8f79-4621-9028-c92882b64ec8) - (at 81.788 27.178 180) + (at 64.516 33.782 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -11862,15 +11754,15 @@ (property "Sheetname" "Baseband") (path "/691ab6db-80d5-4c97-9e5f-aae234327d27/419298a3-1cca-4e67-ab58-1df0c441ba60") (attr smd) - (fp_text reference "R104" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R104" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 125ee79b-d61d-4592-87ff-81e4d2383bf7) ) - (fp_text value "150" (at 0 1.43) (layer "F.Fab") + (fp_text value "150" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 4a945271-9a4b-4e66-9805-87519e5b1195) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp ea6374b3-2a41-437e-b0ca-3c558fdeaa03) ) @@ -11884,10 +11776,10 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 3bcf0796-7f8d-41da-a60f-43048a8b26d6)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp b05deee0-1655-4493-bf1f-77fd9dc2414a)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp d06a169d-80ee-4277-897e-698829d8ed02)) - (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 7827f4a7-d530-49d7-b721-731b1d7cdc21)) - (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 317 "Net-(R104-Pad2)") (pintype "passive") (tstamp b823b22f-9f0e-4bbd-a693-9725d61cefe3)) + (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 307 "Net-(R104-Pad2)") (pintype "passive") (tstamp b823b22f-9f0e-4bbd-a693-9725d61cefe3)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -11928,7 +11820,7 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp a29db164-a0d5-4ca0-aefc-cf31aef49065)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp c13e4d7c-0d2c-44b2-8e59-e60dc757477e)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 305 "Net-(Q24-Pad4)") (pintype "passive") (tstamp fc9de27c-c4e6-4b1b-8abc-3bd6fe482dd9)) + (net 295 "Net-(Q24-Pad4)") (pintype "passive") (tstamp fc9de27c-c4e6-4b1b-8abc-3bd6fe482dd9)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 113 "Net-(C107-Pad2)") (pintype "passive") (tstamp 67d18d86-7052-4677-83ef-54f179e70e81)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -11940,7 +11832,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 7d3aaf4b-9eee-4e79-8a3b-69788cf17ec1) - (at 188.468 33.274 -90) + (at 172.974 29.21) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -11949,15 +11841,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/814f6b17-a92d-4f3a-934b-63533606146d") (attr smd) - (fp_text reference "C126" (at 0 -1.43 90) (layer "F.SilkS") + (fp_text reference "C126" (at 0 -1.43) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 18ea9c6e-e714-469f-b572-852236635417) ) - (fp_text value "5.1pF" (at 0 1.43 90) (layer "F.Fab") + (fp_text value "5.1pF" (at 0 1.43) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 3bdbe4ad-1284-4c57-8e73-f4397b51ffae) ) - (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp b6287678-96fa-4966-991a-071e474b8059) ) @@ -11971,9 +11863,9 @@ (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 741f6f6a-4d24-40d7-a516-0e76a88e2185)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp cd280ffd-58c5-4f81-8045-9804c29b284c)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp e573e477-dbc9-46b1-a3fd-42eb378d93b1)) - (pad "1" smd roundrect (at -0.8625 0 270) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 127 "Net-(C126-Pad1)") (pintype "passive") (tstamp 8d9d5956-3b5d-450e-b715-caf1969021c2)) - (pad "2" smd roundrect (at 0.8625 0 270) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 125 "Net-(C121-Pad1)") (pintype "passive") (tstamp d60c4a79-bf0e-4ac4-836a-34c637168f65)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) @@ -11984,7 +11876,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 7d65a668-e256-40bc-8e84-4de87ee59c4e) - (at 156.185 213.241) + (at 158.5 120.73 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -12014,10 +11906,10 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp b2e25961-ecd9-4786-8b62-ac05b0ce3c56)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp edf62122-33ef-4ed8-a980-a33863b62d35)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp fc534993-d3d4-4034-aafb-f24977dc3393)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 190 "Net-(D20-Pad2)") (pintype "passive") (tstamp 01367210-2e45-42f6-b9a0-319749867e0d)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 150 "/PA 70MHz/VG_5V") (pintype "passive") (tstamp 2d247caa-ffce-4269-9641-089ecb2f5f6e)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 184 "Net-(D20-Pad2)") (pintype "passive") (tstamp 01367210-2e45-42f6-b9a0-319749867e0d)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 147 "/PA 70MHz/VG_5V") (pintype "passive") (tstamp 2d247caa-ffce-4269-9641-089ecb2f5f6e)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -12027,7 +11919,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 7da4ee90-0685-4e30-9908-33add9edafee) - (at 170.125 204.411) + (at 124.968 -10.922 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -12035,15 +11927,15 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-00006067ee2e") (attr smd) - (fp_text reference "R136" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R136" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 11ba4a2e-8990-47c7-8dd9-2f36efc4f228) ) - (fp_text value "0" (at 0 1.43) (layer "F.Fab") + (fp_text value "0" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 0c3fe7e3-b9e4-486d-b075-2bdf7883e61b) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 4358c0fb-9f71-40c0-8505-15ee6bd6e4be) ) @@ -12057,10 +11949,10 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 70dee9d5-5237-4cb7-82dd-ed0de9e36974)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 8444374d-14f9-4bc8-b363-c3b88ff16370)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp afadabce-17b8-43ac-a092-aae34be1e12b)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 134 "Net-(C136-Pad2)") (pintype "passive") (tstamp 65abc001-688f-409a-960f-8d1d1a1c5c00)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 252 "/PA 70MHz/PA_IN") (pintype "passive") (tstamp 811e1bdd-bc93-4ecc-a4b1-e443e84212c6)) + (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 364 "Net-(R136-Pad1)") (pintype "passive") (tstamp 65abc001-688f-409a-960f-8d1d1a1c5c00)) + (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 358 "/TX_to_PA") (pintype "passive") (tstamp 811e1bdd-bc93-4ecc-a4b1-e443e84212c6)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -12201,7 +12093,7 @@ (footprint "mpb:large_inductor" (layer "F.Cu") (tedit 5FC0D6CB) (tstamp 7f331744-4a74-462a-a97a-03e2d0e4477e) - (at 92.855 216.626) + (at 125.73 169.672 180) (property "Need_order" "0") (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") @@ -12221,19 +12113,19 @@ (fp_arc (start -1.4 -1) (mid -2.4 -2) (end -1.4 -3) (layer "F.SilkS") (width 0.15) (tstamp 3b0929c1-42e6-4af5-b321-658ba491a914)) (fp_arc (start -1.4 3) (mid -2.4 2) (end -1.4 1) (layer "F.SilkS") (width 0.15) (tstamp 3f211e35-4418-4d3d-97c6-fb63832ef556)) (fp_arc (start -1.4 1) (mid -2.4 0) (end -1.4 -1) (layer "F.SilkS") (width 0.15) (tstamp 96f03a9b-6384-428b-a922-5531c4133424)) - (pad "1" smd rect locked (at 0 -4.5) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") - (net 211 "Net-(FB3-Pad1)") (pintype "passive") (tstamp 20884eb9-88c9-4167-9de7-d18bda5e9d2c)) - (pad "1" smd rect locked (at 0 -6) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 211 "Net-(FB3-Pad1)") (pintype "passive") (tstamp cec230b3-398f-4c2b-8459-0b41cf03f937)) - (pad "2" smd rect locked (at 0 4.5) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") - (net 148 "Net-(C149-Pad1)") (pintype "passive") (tstamp 25b513b4-501b-496f-b7ee-46b4f7e15caf)) - (pad "2" smd rect locked (at 0 6) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 148 "Net-(C149-Pad1)") (pintype "passive") (tstamp 2fd11895-4fc2-449a-a130-e01cfcb1f3ec)) + (pad "1" smd rect locked (at 0 -4.5 180) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") + (net 363 "Net-(J27-Pad2)") (pintype "passive") (tstamp 20884eb9-88c9-4167-9de7-d18bda5e9d2c)) + (pad "1" smd rect locked (at 0 -6 180) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 363 "Net-(J27-Pad2)") (pintype "passive") (tstamp cec230b3-398f-4c2b-8459-0b41cf03f937)) + (pad "2" smd rect locked (at 0 4.5 180) (size 1 7) (layers "F.Cu" "F.Paste" "F.Mask") + (net 361 "/PA 70MHz/V_{DD}") (pintype "passive") (tstamp 25b513b4-501b-496f-b7ee-46b4f7e15caf)) + (pad "2" smd rect locked (at 0 6 180) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 361 "/PA 70MHz/V_{DD}") (pintype "passive") (tstamp 2fd11895-4fc2-449a-a130-e01cfcb1f3ec)) ) (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 7fb2a504-ef45-4fe4-9925-c43535713277) - (at 225.171 45.847) + (at 226.06 45.847) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -12310,7 +12202,7 @@ (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 70 "Net-(C60-Pad2)") (pintype "passive") (tstamp 279afd1f-de6c-456f-bc09-dc4ff5d3b192)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 181 "Net-(D15-Pad2)") (pintype "passive") (tstamp 8f3b8856-68af-4900-a49f-8b4c1357fc93)) + (net 175 "Net-(D15-Pad2)") (pintype "passive") (tstamp 8f3b8856-68af-4900-a49f-8b4c1357fc93)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -12364,17 +12256,17 @@ (footprint "mpb:four_4mm_pads" (layer "F.Cu") (tedit 5FB8F772) (tstamp 815360d7-4e53-4029-8b47-f7043bfef474) - (at 102.38 201.626) + (at 148.59 173.736 -90) (property "Need_order" "0") (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-00005fba31d6") (attr through_hole) - (fp_text reference "T9" (at -5.25 -4.75 180) (layer "F.SilkS") + (fp_text reference "T9" (at -5.25 -4.75 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp f904d3d5-57d8-410d-8c7d-b0897f1cc5e3) ) - (fp_text value "1:4" (at 0 0) (layer "F.Fab") + (fp_text value "1:4" (at 0 0 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp ddf76ce3-50d8-4978-8956-411cc388ff96) ) @@ -12384,19 +12276,19 @@ (fp_line (start -7.75 5.75) (end 7.75 5.75) (layer "F.SilkS") (width 0.15) (tstamp 755d54e4-f08b-4d00-9c8b-87e7c758d220)) (fp_line (start -7.75 -5.75) (end -7.75 -1.75) (layer "F.SilkS") (width 0.15) (tstamp df4cebc6-ea05-4789-a2ee-eaea3134693f)) (fp_line (start -11.75 -1.75) (end -7.75 -1.75) (layer "F.SilkS") (width 0.15) (tstamp ef296ddc-b739-4b0a-91e5-1485791597f6)) - (pad "1" smd rect locked (at -10 -4) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 145 "Net-(C147-Pad2)") (pinfunction "AA") (pintype "passive") (tstamp 064bee68-0f00-4ead-b4b7-7410f10caac8)) - (pad "2" smd rect locked (at -10 4) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 147 "Net-(C148-Pad2)") (pinfunction "AB") (pintype "passive") (tstamp c23aca8b-7be3-4241-947b-8b215b0da494)) - (pad "3" smd rect locked (at 10 4) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") + (pad "1" smd rect locked (at -10 -4 270) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 143 "Net-(C147-Pad2)") (pinfunction "AA") (pintype "passive") (tstamp 064bee68-0f00-4ead-b4b7-7410f10caac8)) + (pad "2" smd rect locked (at -10 4 270) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 145 "Net-(C148-Pad2)") (pinfunction "AB") (pintype "passive") (tstamp c23aca8b-7be3-4241-947b-8b215b0da494)) + (pad "3" smd rect locked (at 10 4 270) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "SA") (pintype "passive") (tstamp 644e8258-cbaf-4308-a231-5c496f31429f)) - (pad "4" smd rect locked (at 10 -4) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") - (net 151 "Net-(C155-Pad2)") (pinfunction "SB") (pintype "passive") (tstamp 854f93a9-e3a0-44b0-93b7-331567d75b6d)) + (pad "4" smd rect locked (at 10 -4 270) (size 4 4) (layers "F.Cu" "F.Paste" "F.Mask") + (net 365 "Net-(T9-Pad4)") (pinfunction "SB") (pintype "passive") (tstamp 854f93a9-e3a0-44b0-93b7-331567d75b6d)) ) (footprint "Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 8190d215-834e-471e-8076-9e11779bf666) - (at 166.37 69.596 180) + (at 166.878 67.056 180) (descr "Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW18AS10NJ00D") @@ -12521,19 +12413,19 @@ (fp_line (start -4.875 -1.6) (end -4.375 -0.892893) (layer "F.Fab") (width 0.1) (tstamp d681ee73-76a7-4db4-a53b-a115c1a27489)) (fp_line (start -5.875 2.6) (end 5.875 2.6) (layer "F.Fab") (width 0.1) (tstamp d914b7f9-2c53-4f87-87c5-61aede19be10)) (pad "1" smd roundrect (at -4.375 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 224 "Net-(J7-Pad1)") (pinfunction "Pin_1") (pintype "passive") (tstamp c34fa268-36d8-470a-9e41-efe58bf3d4f6)) + (net 217 "Net-(J7-Pad1)") (pinfunction "Pin_1") (pintype "passive") (tstamp c34fa268-36d8-470a-9e41-efe58bf3d4f6)) (pad "2" smd roundrect (at -3.125 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 4 "Net-(C3-Pad1)") (pinfunction "Pin_2") (pintype "passive") (tstamp c8802250-193f-4b9a-87a9-8b4c09ea38cd)) (pad "3" smd roundrect (at -1.875 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 3 "Net-(C2-Pad1)") (pinfunction "Pin_3") (pintype "passive") (tstamp 961f9603-1738-4be1-81b9-6706a3784c77)) (pad "4" smd roundrect (at -0.625 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 225 "unconnected-(J7-Pad4)") (pinfunction "Pin_4") (pintype "passive") (tstamp 8d0a7fd8-7463-4871-bf2b-b0c413146668)) + (net 218 "unconnected-(J7-Pad4)") (pinfunction "Pin_4") (pintype "passive") (tstamp 8d0a7fd8-7463-4871-bf2b-b0c413146668)) (pad "5" smd roundrect (at 0.625 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "Pin_5") (pintype "passive") (tstamp eac0f2fa-5b4d-423b-9f02-f56e28c2355b)) (pad "6" smd roundrect (at 1.875 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 45 "/Baseband/SPKR_OUT") (pinfunction "Pin_6") (pintype "passive") (tstamp 1b5f8cb6-0d0f-42d0-969b-27717d8cf924)) (pad "7" smd roundrect (at 3.125 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 226 "/Baseband/SPKR_DET") (pinfunction "Pin_7") (pintype "passive") (tstamp a13c0e72-d560-4a5b-a440-bcd0a382655b)) + (net 219 "/Baseband/SPKR_DET") (pinfunction "Pin_7") (pintype "passive") (tstamp a13c0e72-d560-4a5b-a440-bcd0a382655b)) (pad "8" smd roundrect (at 4.375 -2.4 270) (size 0.8 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "Pin_8") (pintype "passive") (tstamp 6c0b89a3-9456-47f5-ab47-9b798c51a2ca)) (pad "MP" smd roundrect (at 6.925 0.5 270) (size 2.1 3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.119048) (tstamp 26eff369-9e93-45b5-bc12-aabe898daac8)) @@ -12547,7 +12439,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 822ca5fc-3597-487f-bb85-8f501c4c9a05) - (at 65.1745 31.496 180) + (at 68.9845 31.496 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -12624,7 +12516,7 @@ (pad "1" smd roundrect (at -1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 108 "Net-(C101-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 258c4f71-6e48-446b-b05b-dd134e5df9f5)) (pad "2" smd roundrect (at 1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 360 "Net-(L29-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 0d1d07d3-fea9-4820-a9ef-4aeb4936776d)) + (net 348 "Net-(L29-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 0d1d07d3-fea9-4820-a9ef-4aeb4936776d)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -12677,7 +12569,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 82c1a187-09ae-42ca-9324-a697c763544d) - (at 68.9845 31.496 180) + (at 72.7945 31.496 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -12708,7 +12600,7 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c12c12b3-8a71-4628-94c6-f40b25e46116)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp f43e5cfb-b111-443d-8ca2-83fa127291e2)) (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 281 "Net-(L19-Pad1)") (pintype "passive") (tstamp ac504c8d-be32-4c80-9a7a-45498fbc92fe)) + (net 272 "Net-(L19-Pad1)") (pintype "passive") (tstamp ac504c8d-be32-4c80-9a7a-45498fbc92fe)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 98 "Net-(C83-Pad2)") (pintype "passive") (tstamp 8a6cd8d4-bf8e-409b-af04-04b9da8c257d)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -12764,9 +12656,9 @@ (pad "1" thru_hole rect (at 0 0) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "1") (pintype "passive") (tstamp 3ee3bc99-ceda-43a0-bed0-a460fedb272f)) (pad "2" thru_hole circle (at 0 2.5) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask) - (net 338 "Net-(R178-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 3e8594a6-92b8-4f80-8108-73af0d273b8a)) + (net 327 "Net-(R178-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 3e8594a6-92b8-4f80-8108-73af0d273b8a)) (pad "3" thru_hole circle (at 0 5) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask) - (net 166 "/Control on separate board/5V") (pinfunction "3") (pintype "passive") (tstamp 023ee2d4-bd4e-47f7-9687-58b94baf6233)) + (net 160 "/Control on separate board/5V") (pinfunction "3") (pintype "passive") (tstamp 023ee2d4-bd4e-47f7-9687-58b94baf6233)) (pad "MP" thru_hole roundrect (at 7.5 7.25) (size 2 3) (drill oval 1.1 1.8) (layers *.Cu *.Mask) (roundrect_rratio 0.25) (tstamp 153f1ac3-4f89-4410-9a03-9090f430701e)) (pad "MP" thru_hole roundrect (at 7.5 -2.25) (size 2 3) (drill oval 1.1 1.8) (layers *.Cu *.Mask) (roundrect_rratio 0.25) (tstamp c47e37a9-f1a4-49c0-8428-71f76cf3be47)) (zone (net 0) (net_name "") (layer "F.Cu") (tstamp 8999937d-154e-4950-8bcf-a75b664d80a6) (name "Copper Keep Out") (hatch full 0.508) @@ -12846,9 +12738,9 @@ (fp_line (start 0.25 0) (end 0.75 0) (layer "F.Fab") (width 0.1) (tstamp f37bd29a-9f4f-4858-ae56-78226f74a695)) (fp_line (start 1.4 0.9) (end -1.4 0.9) (layer "F.Fab") (width 0.1) (tstamp fc7f7705-1909-44f8-9711-d76cf11c110b)) (pad "1" smd rect (at -1.4 0 270) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") - (net 179 "Net-(D13-Pad2)") (pinfunction "K") (pintype "passive") (tstamp c555bc79-2d3c-439a-bebb-cc024b50a2dd)) + (net 173 "Net-(D13-Pad2)") (pinfunction "K") (pintype "passive") (tstamp c555bc79-2d3c-439a-bebb-cc024b50a2dd)) (pad "2" smd rect (at 1.4 0 270) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") - (net 180 "Net-(D14-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 46651946-fa94-408c-bee6-2adea0c027e8)) + (net 174 "Net-(D14-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 46651946-fa94-408c-bee6-2adea0c027e8)) (model "${KICAD6_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-123F.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -12945,7 +12837,7 @@ (footprint "Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 857f099d-f804-46b5-8cc3-21000f94ca18) - (at 166.3915 51.308 180) + (at 166.8995 43.942 180) (descr "Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW18AS10NJ00D") @@ -13024,9 +12916,9 @@ (fp_line (start -0.175 -1.1) (end -0.675 -0.6) (layer "F.Fab") (width 0.1) (tstamp 88d36d06-f9c4-4c7d-afa4-5f39d929bf51)) (fp_line (start 0.675 -1.1) (end 0.675 1.1) (layer "F.Fab") (width 0.1) (tstamp a4c4bbc8-b51a-43ac-b773-80d98cd9fce7)) (pad "1" smd rect (at -1.33 -0.65 270) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 170 "Net-(D6-Pad1)") (pintype "passive") (tstamp 5877665c-161e-402d-8d42-4478ff92ec68)) + (net 164 "Net-(D6-Pad1)") (pintype "passive") (tstamp 5877665c-161e-402d-8d42-4478ff92ec68)) (pad "2" smd rect (at -1.33 0.65 270) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 171 "Net-(D6-Pad2)") (pintype "passive") (tstamp b0cbec48-071b-435b-a3ff-df01a9a858b2)) + (net 165 "Net-(D6-Pad2)") (pintype "passive") (tstamp b0cbec48-071b-435b-a3ff-df01a9a858b2)) (pad "3" smd rect (at 1.33 0 270) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") (net 51 "Net-(C46-Pad2)") (pintype "passive") (tstamp 77bed380-9678-4fa0-b3ce-8090723a367a)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-323_SC-70.wrl" @@ -13071,7 +12963,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 724ab8ba-6613-4430-94ac-4d8cc4ebffb7)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 224 "Net-(J7-Pad1)") (pintype "passive") (tstamp 71d3f289-35b0-4c5a-a641-cf8ff23f819d)) + (net 217 "Net-(J7-Pad1)") (pintype "passive") (tstamp 71d3f289-35b0-4c5a-a641-cf8ff23f819d)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -13081,7 +12973,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 8761f77c-e35a-400d-be28-cd5201f4015b) - (at 156.605 207.531) + (at 154.94 159.258 180) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM31C5C1H104JA01L") @@ -13112,10 +13004,10 @@ (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 5062525b-57bd-4532-86c3-2746f0067d74)) (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 509733f7-1d59-4e53-baf9-e6a47084829f)) (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp e8ea711b-2100-42e5-89d7-c71b0f742154)) - (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 144 "Net-(C147-Pad1)") (pintype "passive") (tstamp 4c499bc8-4a81-4101-8136-4f75466c956a)) - (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 145 "Net-(C147-Pad2)") (pintype "passive") (tstamp 13b5d33e-8e37-4a68-939e-6477d754084b)) + (pad "1" smd roundrect (at -1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 142 "Net-(C147-Pad1)") (pintype "passive") (tstamp 4c499bc8-4a81-4101-8136-4f75466c956a)) + (pad "2" smd roundrect (at 1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 143 "Net-(C147-Pad2)") (pintype "passive") (tstamp 13b5d33e-8e37-4a68-939e-6477d754084b)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -13156,7 +13048,7 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp d47baa30-c01d-439f-afce-d73098d989b4)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp f6364078-aa23-412c-a76b-beaf13643d59)) (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 291 "Net-(Q6-Pad2)") (pintype "passive") (tstamp b63338fb-3345-4f95-a78f-d6f57b710b40)) + (net 359 "/Baseband/AGC_to_METER") (pintype "passive") (tstamp b63338fb-3345-4f95-a78f-d6f57b710b40)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp cec391ae-83d9-4383-9169-a5de72bead12)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -13274,7 +13166,7 @@ (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp b87e6a1e-9b82-4852-9abb-6c1ceb78e4cb)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 163 "Net-(C173-Pad2)") (pintype "passive") (tstamp 849270c9-cf98-4c28-895b-1526aba1c3db)) + (net 157 "Net-(C173-Pad2)") (pintype "passive") (tstamp 849270c9-cf98-4c28-895b-1526aba1c3db)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -13284,7 +13176,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 8b1b4a6c-6100-4691-999e-0fa7b10d13fe) - (at 168.705 196.631) + (at 132.334 159.004) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM31C5C1H104JA01L") @@ -13316,9 +13208,9 @@ (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp a5ce6528-3830-4f54-9531-1a3c31162026)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp b70054d9-f827-40c6-8e8a-ff188f0b4401)) (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 146 "Net-(C148-Pad1)") (pintype "passive") (tstamp cf2f4091-2cb8-49fa-9921-bdc119efe552)) + (net 144 "Net-(C148-Pad1)") (pintype "passive") (tstamp cf2f4091-2cb8-49fa-9921-bdc119efe552)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 147 "Net-(C148-Pad2)") (pintype "passive") (tstamp 99e10a5d-6dff-4224-9780-d306dbb84fff)) + (net 145 "Net-(C148-Pad2)") (pintype "passive") (tstamp 99e10a5d-6dff-4224-9780-d306dbb84fff)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -13402,7 +13294,7 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e3935fbe-6fcb-4fff-aa6f-5bd74fa54bd6)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp ea95eef3-dea0-4b61-977b-7525d775e236)) (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 297 "Net-(Q13-Pad1)") (pintype "passive") (tstamp 9875afb0-6eb7-4f8e-9cbd-0818e99d572f)) + (net 287 "Net-(Q13-Pad1)") (pintype "passive") (tstamp 9875afb0-6eb7-4f8e-9cbd-0818e99d572f)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 6b43a05d-515e-4c75-8555-84a1ebc60cac)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -13451,7 +13343,7 @@ (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp b316b064-1cf8-4d41-8530-5be56943dfda)) (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp b8327c84-6667-46ba-8757-058e4fc065d9)) (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 363 "unconnected-(J14-Pad1)") (pinfunction "Pin_1") (pintype "passive") (tstamp 51c90906-e493-4561-8c1a-d282b66eeb93)) + (net 351 "unconnected-(J14-Pad1)") (pinfunction "Pin_1") (pintype "passive") (tstamp 51c90906-e493-4561-8c1a-d282b66eeb93)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_2") (pintype "passive") (tstamp 4b2253a2-d348-405d-8394-5ddc01c4bd0d)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) @@ -13463,7 +13355,7 @@ (pad "6" thru_hole oval (at 0 12.7) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_6") (pintype "passive") (tstamp ceb5ef88-abea-405e-891e-e2b74c3f9a6e)) (pad "7" thru_hole oval (at 0 15.24) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 306 "/70MHz VHF Frontend/+VRX_FE") (pinfunction "Pin_7") (pintype "passive") (tstamp ffb4d1bc-237b-402c-8072-0356532739ca)) + (net 296 "/70MHz VHF Frontend/+VRX_FE") (pinfunction "Pin_7") (pintype "passive") (tstamp ffb4d1bc-237b-402c-8072-0356532739ca)) (pad "8" thru_hole oval (at 0 17.78) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_8") (pintype "passive") (tstamp 53c516ca-75d5-40f0-962e-f9abde0bc5dc)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x08_P2.54mm_Vertical.wrl" @@ -13475,7 +13367,7 @@ (footprint "Potentiometer_SMD:Potentiometer_Bourns_3214W_Vertical" (layer "F.Cu") (tedit 5A3D7171) (tstamp 8d778e1a-fd7a-41e6-9e1d-452648c20ead) - (at 140.035 215.761) + (at 131.064 137.16) (descr "Potentiometer, vertical, Bourns 3214W, https://www.bourns.com/docs/Product-Datasheets/3214.pdf") (tags "Potentiometer vertical Bourns 3214W") (property "MPN" "Bourns 3214W-1-102E") @@ -13515,9 +13407,9 @@ (fp_line (start 2.4 1.75) (end 2.4 -1.75) (layer "F.Fab") (width 0.1) (tstamp ef96e88a-24f4-405c-913c-5ac68937a66c)) (fp_circle (center -1.2 0.65) (end -0.45 0.65) (layer "F.Fab") (width 0.1) (fill none) (tstamp 0a1202f9-a15e-49b9-853e-0578d2b1497c)) (pad "1" smd rect (at 1.25 -1.45) (size 1.3 1.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 150 "/PA 70MHz/VG_5V") (pinfunction "1") (pintype "passive") (tstamp 3db39677-9c4f-43dc-a709-e32f4f75fc76)) + (net 147 "/PA 70MHz/VG_5V") (pinfunction "1") (pintype "passive") (tstamp 3db39677-9c4f-43dc-a709-e32f4f75fc76)) (pad "2" smd rect (at 0 1.45) (size 2 1.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 324 "Net-(R157-Pad1)") (pinfunction "2") (pintype "passive") (tstamp ad351248-4562-4cc9-a32c-ccfdb9f5eaa7)) + (net 313 "Net-(R157-Pad1)") (pinfunction "2") (pintype "passive") (tstamp ad351248-4562-4cc9-a32c-ccfdb9f5eaa7)) (pad "3" smd rect (at -1.25 -1.45) (size 1.3 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "3") (pintype "passive") (tstamp 1f239b46-7a79-46aa-8508-7c04c217f16f)) (model "${KICAD6_3DMODEL_DIR}/Potentiometer_SMD.3dshapes/Potentiometer_Bourns_3214W_Vertical.wrl" @@ -13605,15 +13497,15 @@ (fp_line (start -0.3125 -1) (end -0.625 -0.6875) (layer "F.Fab") (width 0.1) (tstamp c5e161b1-9f77-4f5e-a7d7-79e040e3a608)) (fp_line (start -0.3125 -1) (end 0.625 -1) (layer "F.Fab") (width 0.1) (tstamp de459802-fc24-411d-8776-6cec00cc4985)) (pad "1" smd rect (at -1.59 -1.27 270) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 299 "Net-(Q14-Pad3)") (pinfunction "PR1") (pintype "passive") (clearance 0.2) (tstamp 1c085623-6884-4d5b-a15c-1592f8d00529)) + (net 289 "Net-(Q14-Pad3)") (pinfunction "PR1") (pintype "passive") (clearance 0.2) (tstamp 1c085623-6884-4d5b-a15c-1592f8d00529)) (pad "2" smd rect (at -1.59 0 270) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 353 "unconnected-(T4-Pad2)") (pinfunction "PM") (pintype "passive+no_connect") (clearance 0.2) (tstamp 2835ee12-f853-4f4b-bdaf-2bdfd6feebbc)) + (net 342 "unconnected-(T4-Pad2)") (pinfunction "PM") (pintype "passive+no_connect") (clearance 0.2) (tstamp 2835ee12-f853-4f4b-bdaf-2bdfd6feebbc)) (pad "3" smd rect (at -1.59 1.27 270) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 73 "Net-(C63-Pad2)") (pinfunction "PR2") (pintype "passive") (clearance 0.2) (tstamp aabf43f8-4697-4c9a-a7e9-c4199ef90e1c)) (pad "4" smd rect (at 1.59 1.27 270) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 297 "Net-(Q13-Pad1)") (pinfunction "S1") (pintype "passive") (clearance 0.2) (tstamp e1e187e8-10f5-4950-9bb7-520414ba31b3)) + (net 287 "Net-(Q13-Pad1)") (pinfunction "S1") (pintype "passive") (clearance 0.2) (tstamp e1e187e8-10f5-4950-9bb7-520414ba31b3)) (pad "5" smd rect (at 1.59 0 270) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 295 "Net-(Q11-Pad1)") (pinfunction "S2") (pintype "passive") (clearance 0.2) (tstamp fc070a00-bb76-4ccb-9920-893e1e0a29fb)) + (net 285 "Net-(Q11-Pad1)") (pinfunction "S2") (pintype "passive") (clearance 0.2) (tstamp fc070a00-bb76-4ccb-9920-893e1e0a29fb)) (pad "6" smd rect (at 1.59 -1.27 270) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (clearance 0.2) (tstamp dde5d22f-99bc-4ad2-b02c-73fbc33be523)) (model "${KICAD6_3DMODEL_DIR}/RF_Converter.3dshapes/Balun_Johanson_5400BL15B050E.wrl" @@ -13713,7 +13605,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 8f7678b6-c16b-409b-b68e-06436505ef67) - (at 170.125 201.901) + (at 157.48 147.32 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -13743,10 +13635,10 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 6804fdc8-dcd9-4ebb-b92d-76010f802116)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp ac295ee0-8eb8-4002-a5a3-cb25c277bf28)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e7e6f00d-3e9c-42d9-b580-9d6f6f8cbb5b)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 136 "VGG1") (pintype "passive") (tstamp 4ea9e714-a2b3-4363-97ea-90ff7a868a92)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 140 "Net-(C143-Pad2)") (pintype "passive") (tstamp 3a3b5eba-3efa-414e-9d30-5c421cebcad4)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 134 "VGG1") (pintype "passive") (tstamp 4ea9e714-a2b3-4363-97ea-90ff7a868a92)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 138 "Net-(C143-Pad2)") (pintype "passive") (tstamp 3a3b5eba-3efa-414e-9d30-5c421cebcad4)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -13756,7 +13648,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 915ba95e-7884-425d-8348-ab7ea4d2990f) - (at 97.282 92.3025 -90) + (at 93.472 96.774 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -13764,15 +13656,15 @@ (property "Sheetname" "Baseband") (path "/691ab6db-80d5-4c97-9e5f-aae234327d27/4dd2e674-4b76-42fa-b44b-624658cdd9f2") (attr smd) - (fp_text reference "R55" (at 0 -1.43 90) (layer "F.SilkS") + (fp_text reference "R55" (at 0 -1.43) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp ac7ecbe8-b44b-4c15-af07-960b2502ace9) ) - (fp_text value "51" (at 0 1.43 90) (layer "F.Fab") + (fp_text value "51" (at 0 1.43) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 810d4dec-13f7-4068-812e-4bea38fefb41) ) - (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 217074d3-f82b-498d-ba96-fb8bfe770238) ) @@ -13786,9 +13678,9 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 7173db3a-f2ba-457b-8d91-4c84e82eae28)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 85101264-755d-44e8-b9c2-f38b8f2865a9)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp bbec2595-794e-4554-80d4-c93d5fbc24b0)) - (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 296 "Net-(Q11-Pad3)") (pintype "passive") (tstamp 57f858a8-73be-428c-a046-40f1ed09ff8c)) - (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 286 "Net-(Q11-Pad3)") (pintype "passive") (tstamp 57f858a8-73be-428c-a046-40f1ed09ff8c)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp a6fbd7ff-54aa-4724-afca-1244c6eb9d95)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) @@ -13831,7 +13723,7 @@ (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp cff9ded4-6042-4f50-8d92-f5eb4d577d2b)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp de3b564a-2af1-49e0-9208-bbd96de5ef97)) (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 440bd624-610c-4bb0-91bc-ec3b995e7361)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 440bd624-610c-4bb0-91bc-ec3b995e7361)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 92ea3b0b-202b-4709-8fdf-efe112bb8e8f)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" @@ -13843,7 +13735,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 916c3fcf-c636-4ae5-8179-0ab37e787f3e) - (at 82.804 32.766 90) + (at 99.822 30.4585 -90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -13873,10 +13765,10 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 3400cd4f-a2e9-49a4-83bc-034915a1238d)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 50046454-76b7-412a-a6b3-06487733237d)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp d1f4362f-4d3a-4e9d-a165-5466c4cbc6b7)) - (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 319 "Net-(R101-Pad1)") (pintype "passive") (tstamp fcc56f34-fedd-436c-9cdb-82cab58831fb)) - (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 318 "Net-(R100-Pad1)") (pintype "passive") (tstamp a0a4f9fe-55b7-474e-9c9c-1eccf64d93c9)) + (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 309 "Net-(R101-Pad1)") (pintype "passive") (tstamp fcc56f34-fedd-436c-9cdb-82cab58831fb)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 308 "Net-(R100-Pad1)") (pintype "passive") (tstamp a0a4f9fe-55b7-474e-9c9c-1eccf64d93c9)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -13921,9 +13813,9 @@ (fp_line (start 0.65 -1.45) (end 0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp 8656739f-f68c-426b-8604-4898445e3869)) (fp_line (start -0.65 -1.125) (end -0.325 -1.45) (layer "F.Fab") (width 0.1) (tstamp 9d264443-c7c1-460d-87d8-3755e6687c23)) (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 293 "Net-(Q10-Pad1)") (pinfunction "B") (pintype "input") (tstamp 2664d6ee-b706-43b2-9489-ec5a03379d22)) + (net 283 "Net-(Q10-Pad1)") (pinfunction "B") (pintype "input") (tstamp 2664d6ee-b706-43b2-9489-ec5a03379d22)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 294 "Net-(Q10-Pad2)") (pinfunction "E") (pintype "passive") (tstamp af74c9ca-846e-4288-b4fd-2c4cb63f294e)) + (net 284 "Net-(Q10-Pad2)") (pinfunction "E") (pintype "passive") (tstamp af74c9ca-846e-4288-b4fd-2c4cb63f294e)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 63 "Net-(C54-Pad2)") (pinfunction "C") (pintype "passive") (tstamp f6923c26-4f75-427f-983b-654ed3ea1aa4)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" @@ -14023,7 +13915,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 92a011a6-2ecc-478d-a26f-4cbdf8cf0d1c) - (at 188.722 29.718 90) + (at 163.576 37.846 -90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -14054,9 +13946,9 @@ (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 5d8d3895-726e-45be-80a4-b06f0ee67d4f)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 5dd382ca-6020-4aca-98d3-1e67531b71f7)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp a7732cc6-8020-4a3d-8f21-87015718c776)) - (pad "1" smd roundrect (at -0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.8625 0 270) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 127 "Net-(C126-Pad1)") (pintype "passive") (tstamp dc1533af-ccb2-4904-b73b-908f62604535)) - (pad "2" smd roundrect (at 0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "2" smd roundrect (at 0.8625 0 270) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 131 "/70MHz VHF Frontend/RX_TO_MIX") (pintype "passive") (tstamp c1de5aa3-dd5e-46c2-ae66-742c2f638662)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) @@ -14142,9 +14034,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp cfa8db8e-74df-410c-b209-05ae840a1ad0)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp dd9169d2-57dc-499d-b313-433e39e43af5)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 162 "Net-(C172-Pad1)") (pintype "passive") (tstamp ccd4145d-6493-489a-bd0e-62467f4bf65f)) + (net 156 "Net-(C172-Pad1)") (pintype "passive") (tstamp ccd4145d-6493-489a-bd0e-62467f4bf65f)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 161 "Net-(C171-Pad1)") (pintype "passive") (tstamp 206b2ec5-7426-4c5a-8f8b-9c7b452a11c0)) + (net 155 "Net-(C171-Pad1)") (pintype "passive") (tstamp 206b2ec5-7426-4c5a-8f8b-9c7b452a11c0)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14230,7 +14122,7 @@ (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 86 "Net-(C73-Pad2)") (pintype "passive") (tstamp 8860cc2a-27dd-40d6-9cb9-82b356bbe6fa)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 181 "Net-(D15-Pad2)") (pintype "passive") (tstamp 13fc8781-18cd-46e7-8300-e0aae8b31c09)) + (net 175 "Net-(D15-Pad2)") (pintype "passive") (tstamp 13fc8781-18cd-46e7-8300-e0aae8b31c09)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14277,9 +14169,9 @@ (fp_line (start 1.27 -1.27) (end 1.27 3.81) (layer "F.Fab") (width 0.1) (tstamp b0d0c33f-48a4-49f7-88bb-977f9c004c81)) (fp_line (start -1.27 3.81) (end -1.27 -0.635) (layer "F.Fab") (width 0.1) (tstamp f12f0a80-deda-4c2b-ad06-38877b05c646)) (pad "1" thru_hole rect (at 0 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 264 "/Control on separate board/PC14") (pinfunction "Pin_1") (pintype "passive") (tstamp fe417b6c-da70-4485-b0f0-8555e8bfbd20)) + (net 255 "/Control on separate board/PC14") (pinfunction "Pin_1") (pintype "passive") (tstamp fe417b6c-da70-4485-b0f0-8555e8bfbd20)) (pad "2" thru_hole oval (at 0 2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 265 "/Control on separate board/PC13") (pinfunction "Pin_2") (pintype "passive") (tstamp 50628873-b7c2-4606-935e-66d6d9589848)) + (net 256 "/Control on separate board/PC13") (pinfunction "Pin_2") (pintype "passive") (tstamp 50628873-b7c2-4606-935e-66d6d9589848)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14289,7 +14181,7 @@ (footprint "Inductor_SMD:L_1008_2520Metric" (layer "F.Cu") (tedit 5F68FEF0) (tstamp 9723f5b4-0c60-41f6-97c3-391346b54ad0) - (at 163.825 197.001) + (at 158.496 158.945 90) (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") (tags "inductor") (property "MPN" "") @@ -14297,15 +14189,15 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-000060567bd9") (attr smd) - (fp_text reference "L39" (at 0 -2.05) (layer "F.SilkS") + (fp_text reference "L39" (at 0 -2.05 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp e344a704-e61c-4449-8648-416fb3b87152) ) - (fp_text value "TBD" (at 0 2.05) (layer "F.Fab") + (fp_text value "TBD" (at 0 2.05 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp d2135b84-8c7c-488f-8b82-7fdd22570abd) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.62 0.62) (thickness 0.09))) (tstamp 05c4e451-79d3-4430-9ae4-aa9e819e459b) ) @@ -14319,10 +14211,10 @@ (fp_line (start 1.25 -1) (end 1.25 1) (layer "F.Fab") (width 0.1) (tstamp c1da08f6-6b21-4cde-b1c7-037c885ad7e8)) (fp_line (start 1.25 1) (end -1.25 1) (layer "F.Fab") (width 0.1) (tstamp de8d5f77-39d3-48c0-8161-980bb4cade45)) (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp e767d619-62ee-4788-a8d8-c9ea91142404)) - (pad "1" smd roundrect (at -1.075 0) (size 1.25 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.2) - (net 144 "Net-(C147-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 7fb55707-3151-44da-a5f7-052d9eedda05)) - (pad "2" smd roundrect (at 1.075 0) (size 1.25 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.2) - (net 285 "Net-(L39-Pad2)") (pinfunction "2") (pintype "passive") (tstamp db5c1d4f-eba7-4423-8eca-494ec0cad9b6)) + (pad "1" smd roundrect (at -1.075 0 90) (size 1.25 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.2) + (net 142 "Net-(C147-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 7fb55707-3151-44da-a5f7-052d9eedda05)) + (pad "2" smd roundrect (at 1.075 0 90) (size 1.25 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.2) + (net 276 "Net-(L39-Pad2)") (pinfunction "2") (pintype "passive") (tstamp db5c1d4f-eba7-4423-8eca-494ec0cad9b6)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14447,7 +14339,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 9878c161-c626-4bde-a804-c7a156e8608f) - (at 139.615 220.291) + (at 137.033 143.383 180) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "885612007040/VJ0805A102GXXPW1BC") @@ -14478,10 +14370,10 @@ (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 8ee44b42-274c-49bf-ba18-67c56df23c28)) (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp a057caf3-d6af-456a-b43e-73a33cca8277)) (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp ee065a94-14d4-4d01-9f0d-6b45700b21a3)) - (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 141 "Net-(C144-Pad1)") (pintype "passive") (tstamp e68903a1-5115-4f5f-8a11-2fb901c61a22)) - (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 142 "Net-(C144-Pad2)") (pintype "passive") (tstamp fd499c07-9dee-44cc-a2bc-d966e099e05b)) + (pad "1" smd roundrect (at -1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 139 "Net-(C144-Pad1)") (pintype "passive") (tstamp e68903a1-5115-4f5f-8a11-2fb901c61a22)) + (pad "2" smd roundrect (at 1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 140 "Net-(C144-Pad2)") (pintype "passive") (tstamp fd499c07-9dee-44cc-a2bc-d966e099e05b)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14491,7 +14383,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 990ee849-9b8a-4247-a2a9-d84acb04228a) - (at 80.264 32.004) + (at 99.822 33.7605 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -14499,15 +14391,15 @@ (property "Sheetname" "Baseband") (path "/691ab6db-80d5-4c97-9e5f-aae234327d27/897dc223-825b-44ae-b85b-e3b24c46393b") (attr smd) - (fp_text reference "R105" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R105" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 69c68e59-cbd3-4207-925e-ca6038d9dc98) ) - (fp_text value "150" (at 0 1.43) (layer "F.Fab") + (fp_text value "150" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 0cd594d1-8e7b-4f76-a0d2-d7bf3cc56ce5) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 32ac151d-156f-4f61-bdf5-3ce56a352b0e) ) @@ -14521,10 +14413,10 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp d2e771c1-f1a8-4936-8919-9c29b1bc2944)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp dd432e7c-03b4-4244-8170-4cf2e6fd7a0f)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e7822610-0990-4b7c-a186-8abae24b4c95)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 9b78deae-1ffd-45c6-ad78-e959ac7ddcff)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 318 "Net-(R100-Pad1)") (pintype "passive") (tstamp fdb06ad3-7f41-4583-8127-c90477d32e4c)) + (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 308 "Net-(R100-Pad1)") (pintype "passive") (tstamp fdb06ad3-7f41-4583-8127-c90477d32e4c)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14578,7 +14470,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 992251e9-8fb9-4f5f-9b82-3bb59a509ce8) - (at 226.187 59.563 -90) + (at 227.076 59.563 -90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -14704,17 +14596,17 @@ (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_1") (pintype "passive") (tstamp 9f15410c-0ced-4f61-925b-d989f5f05847)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 178 "Net-(D11-Pad3)") (pinfunction "Pin_2") (pintype "passive") (tstamp b5434987-7841-4e66-a219-c2f95e62bafa)) + (net 172 "Net-(D11-Pad3)") (pinfunction "Pin_2") (pintype "passive") (tstamp b5434987-7841-4e66-a219-c2f95e62bafa)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_3") (pintype "passive") (tstamp 3dfbc8e6-0b64-4601-a648-9afc87cd2ab8)) (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 5 "+9VA") (pinfunction "Pin_4") (pintype "passive") (tstamp 2970ba1b-5314-4674-92ce-77a80d058914)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 238 "/Baseband/GPIO_XTAL") (pinfunction "Pin_5") (pintype "passive") (tstamp 865119c3-3798-4fbf-8977-8ba0c9ea9e18)) + (net 231 "/Baseband/GPIO_XTAL") (pinfunction "Pin_5") (pintype "passive") (tstamp 865119c3-3798-4fbf-8977-8ba0c9ea9e18)) (pad "6" thru_hole oval (at 0 12.7) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_6") (pintype "passive") (tstamp ccd42ce5-1f0d-4a5f-bfd4-2be6b65bdfbb)) (pad "7" thru_hole oval (at 0 15.24) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 175 "Net-(D10-Pad3)") (pinfunction "Pin_7") (pintype "passive") (tstamp dded5d4d-0694-46ce-b85d-604854dbe811)) + (net 169 "Net-(D10-Pad3)") (pinfunction "Pin_7") (pintype "passive") (tstamp dded5d4d-0694-46ce-b85d-604854dbe811)) (pad "8" thru_hole oval (at 0 17.78) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_8") (pintype "passive") (tstamp e1abfc2c-2dbd-4e55-b9ce-9c8e0d1b64c1)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x08_P2.54mm_Vertical.wrl" @@ -14771,7 +14663,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 99fa2f03-bdb4-4ee9-81fb-004f96161d36) - (at 70.358 34.798 90) + (at 74.168 34.798 90) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "") @@ -14813,6 +14705,50 @@ ) ) + (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEEF) (tstamp 9a4a8758-71fc-4f6e-827f-3645d0aed076) + (at 116.586 82.55 180) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor handsolder") + (property "MPN" "VJ0805A103KXJTBC") + (property "Need_order" "0") + (property "Sheetfile" "ant_switch.kicad_sch") + (property "Sheetname" "Antenna Switch") + (path "/2eb25ee2-d512-42fe-80f1-00400ed0a45e/dbf9bfef-eaa6-4865-9638-cc6286eaf1d1") + (attr smd) + (fp_text reference "C119" (at 0 -1.68) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 174c8b80-fdd1-45bf-a425-7649f7e5f968) + ) + (fp_text value "10nF" (at 0 1.68) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 07ef6a68-470e-4da1-b30c-7b7b472ab477) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 7305ec1a-5b5e-40b5-a284-7f94994056d0) + ) + (fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer "F.SilkS") (width 0.12) (tstamp 2447fa67-5a9a-4a09-a751-c3e61b3582ae)) + (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer "F.SilkS") (width 0.12) (tstamp 87baa5c5-d53b-4e76-a2cc-dcf7d9b2ccc3)) + (fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer "F.CrtYd") (width 0.05) (tstamp 262bc04d-9184-452f-ba41-01d0287386b6)) + (fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer "F.CrtYd") (width 0.05) (tstamp 34cce884-eff7-4447-bba4-7fb6649a7f9a)) + (fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer "F.CrtYd") (width 0.05) (tstamp 9fea7ac1-8ec8-4f5a-a637-cc59d871d5c4)) + (fp_line (start 1.88 0.98) (end -1.88 0.98) (layer "F.CrtYd") (width 0.05) (tstamp f6aa37d0-94dc-425f-aed5-066dd132256e)) + (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 3cd16be8-e90c-46ef-992f-ed8f82bab212)) + (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 766c76ed-5048-44a8-86c5-074c3723027f)) + (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp a14b706f-9cdb-4d49-b7f0-21b1c48b736a)) + (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp ea44338a-7e28-4574-8e63-00ec80fbeb08)) + (pad "1" smd roundrect (at -1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 353 "Net-(C119-Pad1)") (pintype "passive") (tstamp 38dce24c-3e84-454a-88a1-55c34d574d91)) + (pad "2" smd roundrect (at 1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 2 "GND") (pintype "passive") (tstamp 27929c22-fcc7-49bd-96d1-3af207046972)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 9a7b303b-1fce-4db1-b662-47392ea78a40) (at 82.804 60.452 -90) @@ -14859,7 +14795,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 9ac9fbf0-a637-490a-aaf5-dbc5788838d4) - (at 190.5 29.718 90) + (at 160.782 54.61 -90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -14889,9 +14825,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 50246e35-4482-40c8-9bf8-f1da95d0d639)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 69fd7225-f636-4314-84a7-a86d2a463739)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 8d1b1236-352e-4320-b3a2-ba0284d57848)) - (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 0a911520-3edc-42ae-a1af-7276a4a5d84f)) - (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 131 "/70MHz VHF Frontend/RX_TO_MIX") (pintype "passive") (tstamp b1d19ad0-dae1-4558-8467-44b44c6e9ca8)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) @@ -14933,9 +14869,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp eb3c6f77-c711-4735-bc3c-43b6e9cff4e5)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp f507c10f-4090-4191-a80e-1d3313a20436)) (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp ea314665-f6d8-4bef-84a2-82e0601042c5)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp ea314665-f6d8-4bef-84a2-82e0601042c5)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 342 "/Control on separate board/BOOT1") (pintype "passive") (tstamp 177a0e9b-83ed-45a4-86f9-0c737687a729)) + (net 331 "/Control on separate board/BOOT1") (pintype "passive") (tstamp 177a0e9b-83ed-45a4-86f9-0c737687a729)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14945,7 +14881,7 @@ (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 9afd7bbc-f933-47ea-bb00-1471de402763) - (at 161.355 206.371) + (at 161.036 159.004 90) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor") (property "Need_order" "0") @@ -14953,15 +14889,15 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-000060567bce") (attr smd) - (fp_text reference "R151" (at 0 -1.65) (layer "F.SilkS") + (fp_text reference "R151" (at 0 -1.65 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp d093dd5a-f2cb-4136-8d15-820724acb1ab) ) - (fp_text value "1.5k/2W" (at 0 1.65) (layer "F.Fab") + (fp_text value "1.5k/2W" (at 0 1.65 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp cb03efb8-a959-4506-ba14-7999b0f2b165) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.08))) (tstamp 809465be-d4b4-49e5-8661-8a3e5d9cf7b9) ) @@ -14975,10 +14911,10 @@ (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 3a82bc77-acee-4c53-bfdb-9b0de155b9a2)) (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 62c07803-a12c-4c7e-acd6-10cb4ffba933)) (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp c7d3c4f6-cb75-4ea9-9435-d516d13df4db)) - (pad "1" smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902) - (net 144 "Net-(C147-Pad1)") (pintype "passive") (tstamp 1f7aa685-cd40-437f-85c1-a7551c7eacd0)) - (pad "2" smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902) - (net 285 "Net-(L39-Pad2)") (pintype "passive") (tstamp 00861ad5-7a4e-4654-b9d0-57081434f1e0)) + (pad "1" smd roundrect (at -0.9125 0 90) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902) + (net 142 "Net-(C147-Pad1)") (pintype "passive") (tstamp 1f7aa685-cd40-437f-85c1-a7551c7eacd0)) + (pad "2" smd roundrect (at 0.9125 0 90) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902) + (net 276 "Net-(L39-Pad2)") (pintype "passive") (tstamp 00861ad5-7a4e-4654-b9d0-57081434f1e0)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -14986,6 +14922,82 @@ ) ) + (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") + (tedit 56D1B4CB) (tstamp 9bc33295-b205-4ea4-ab1d-c8621ae72ebb) + (at 116.84 142.24) + (descr "Mounting Hole 3.2mm, M3, DIN965") + (tags "mounting hole 3.2mm m3 din965") + (property "Need_order" "0") + (property "Sheetfile" "pa_70.kicad_sch") + (property "Sheetname" "PA 70MHz") + (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/9c86c036-edf6-4d46-88c2-7781730c4596") + (attr exclude_from_pos_files) + (fp_text reference "H38" (at 0 -3.8) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 96186399-2fa5-42cc-9fe4-7b06daea8a9c) + ) + (fp_text value "M3" (at 0 3.8) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp e629e71b-8ea6-48e6-a31f-584cd3f96997) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 6d24c42d-cba5-47e9-a2d6-e739a30ea284) + ) + (fp_circle (center 0 0) (end 2.8 0) (layer "Cmts.User") (width 0.15) (fill none) (tstamp e644e122-e5a3-4d4e-8178-bc4bb365975b)) + (fp_circle (center 0 0) (end 3.05 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp 9c1062f0-1b46-4abd-9a33-8111c88911e2)) + (pad "1" thru_hole circle (at 0 0) (size 5.6 5.6) (drill 3.2) (layers *.Cu *.Mask) + (net 2 "GND") (pinfunction "1") (pintype "input") (tstamp 0b10d313-4310-4b04-8d0a-332df5e387e5)) + ) + + (footprint "Package_TO_SOT_SMD:SOT-23_Handsoldering" (layer "F.Cu") + (tedit 5A0AB76C) (tstamp 9c9edba1-21e6-4c2c-a14a-449cf9e5606b) + (at 116.84 86.36 -90) + (descr "SOT-23, Handsoldering") + (tags "SOT-23") + (property "MPN" "BAT18") + (property "Need_order" "0") + (property "Sheetfile" "ant_switch.kicad_sch") + (property "Sheetname" "Antenna Switch") + (path "/2eb25ee2-d512-42fe-80f1-00400ed0a45e/29e03b63-3abe-49c2-94e8-b7ee108d5751") + (attr smd) + (fp_text reference "D1" (at 0 -2.5 90) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 6c1a95c3-ce90-45d9-b261-b5cbe3ce09b3) + ) + (fp_text value "BAT18" (at 0 2.5 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 46d745c6-f46b-4936-bed1-24ed69e70230) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.075))) + (tstamp 1d1851c9-f569-4a59-a649-001b24d73ddd) + ) + (fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer "F.SilkS") (width 0.12) (tstamp 8ff8fdb0-6ee6-4e21-b3c3-f3c81093c641)) + (fp_line (start 0.76 1.58) (end -0.7 1.58) (layer "F.SilkS") (width 0.12) (tstamp f2d79697-9628-4888-88c9-06959162444a)) + (fp_line (start 0.76 1.58) (end 0.76 0.65) (layer "F.SilkS") (width 0.12) (tstamp f46c456e-833f-41a0-8cdc-726e6669d780)) + (fp_line (start 0.76 -1.58) (end -2.4 -1.58) (layer "F.SilkS") (width 0.12) (tstamp f76eda02-b822-4dd0-8512-ca884416e5c6)) + (fp_line (start -2.7 1.75) (end -2.7 -1.75) (layer "F.CrtYd") (width 0.05) (tstamp 085aee0b-83c7-4201-a1ea-ddafecf6b7bf)) + (fp_line (start 2.7 -1.75) (end 2.7 1.75) (layer "F.CrtYd") (width 0.05) (tstamp aad57dd0-bd9c-4f45-858a-57abb9be73d7)) + (fp_line (start 2.7 1.75) (end -2.7 1.75) (layer "F.CrtYd") (width 0.05) (tstamp cb6fe919-d8ef-40b6-8216-a6ebf6f369ab)) + (fp_line (start -2.7 -1.75) (end 2.7 -1.75) (layer "F.CrtYd") (width 0.05) (tstamp eb3a7d4c-66ba-4e16-95eb-f476aaf3fdfb)) + (fp_line (start -0.15 -1.52) (end 0.7 -1.52) (layer "F.Fab") (width 0.1) (tstamp 0a590f5f-b880-4c28-909d-5d197ea6b5be)) + (fp_line (start -0.7 1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp 1c012e8b-8e83-423b-b020-07e4935a177e)) + (fp_line (start -0.7 -0.95) (end -0.15 -1.52) (layer "F.Fab") (width 0.1) (tstamp 5a37ad3d-a55f-47b5-87f0-b35126681481)) + (fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp 6b4182a8-5716-42c7-82ac-99ee7c976097)) + (fp_line (start -0.7 -0.95) (end -0.7 1.5) (layer "F.Fab") (width 0.1) (tstamp df24609e-fb97-4e6f-a823-cd3a35ef065c)) + (pad "1" smd rect (at -1.5 -0.95 270) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") + (net 353 "Net-(C119-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 158d1abf-c0d4-4e54-b757-c931b8054612)) + (pad "2" smd rect (at -1.5 0.95 270) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp a8504374-1609-4aa3-a922-cd939e9dcf96)) + (pad "3" smd rect (at 1.5 0 270) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") + (net 18 "Net-(C17-Pad1)") (pinfunction "K") (pintype "passive") (tstamp 8be94d50-a388-4f3e-85ed-d5fe59d4dfce)) + (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "mpb:Jack_3.5mm_CUI_SJ-43515TS-SMT" (layer "F.Cu") (tedit 5C635470) (tstamp 9d62da4a-62c2-418f-b927-872a7eeeaab6) (at 260.127 137.147 90) @@ -15038,17 +15050,17 @@ (pad "" np_thru_hole circle (at 0 4.5 90) (size 1.7 1.7) (drill 1.7) (layers *.Cu *.Mask) (tstamp 39eac7dc-3724-4736-b5e3-718874ffea5d)) (pad "" np_thru_hole circle (at 0 -2.5 90) (size 1.7 1.7) (drill 1.7) (layers *.Cu *.Mask) (tstamp c178c117-1ba5-4edb-b00a-8ca840def3dd)) (pad "NC" smd rect (at 3.683 -4.572 90) (size 2.8 2.2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 212 "unconnected-(J3-PadNC)") (pintype "no_connect") (tstamp ad26d9a8-798e-4480-812d-41c0273572f0)) + (net 205 "unconnected-(J3-PadNC)") (pintype "no_connect") (tstamp ad26d9a8-798e-4480-812d-41c0273572f0)) (pad "R1" smd rect (at 3.7 -1.6 90) (size 2.8 2.2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 213 "Net-(J3-PadR1)") (pintype "passive") (tstamp 4ce06ed8-d822-4fa1-ae5b-071a42dbc008)) + (net 206 "Net-(J3-PadR1)") (pintype "passive") (tstamp 4ce06ed8-d822-4fa1-ae5b-071a42dbc008)) (pad "R2" smd rect (at -3.7 -3.6 90) (size 2.8 2.2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 214 "unconnected-(J3-PadR2)") (pintype "passive+no_connect") (tstamp 4e46e48e-acd1-4a06-a675-829abd91fc9f)) + (net 207 "unconnected-(J3-PadR2)") (pintype "passive+no_connect") (tstamp 4e46e48e-acd1-4a06-a675-829abd91fc9f)) (pad "S" smd rect (at -3.7 -6.477 90) (size 2.8 2.2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 215 "Net-(J3-PadS)") (pintype "passive") (tstamp aa5b763f-4c19-4103-83c9-9b1c07257d4a)) + (net 208 "Net-(J3-PadS)") (pintype "passive") (tstamp aa5b763f-4c19-4103-83c9-9b1c07257d4a)) (pad "T" smd rect (at -3.7 5.8 90) (size 2.8 2.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 216 "Net-(J3-PadT)") (pintype "passive") (tstamp 47203117-3e4d-4b59-ba0c-a71cb896ba44)) + (net 209 "Net-(J3-PadT)") (pintype "passive") (tstamp 47203117-3e4d-4b59-ba0c-a71cb896ba44)) (pad "TN" smd rect (at 0.75 9.8 90) (size 2.8 2.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 217 "unconnected-(J3-PadTN)") (pintype "passive+no_connect") (tstamp eac6a203-34a8-423d-834e-050b44d38cb2)) + (net 210 "unconnected-(J3-PadTN)") (pintype "passive+no_connect") (tstamp eac6a203-34a8-423d-834e-050b44d38cb2)) (model "${KICAD6_3DMODEL_DIR}/Connector_Audio.3dshapes/Jack_3.5mm_CUI_SJ-3524-SMT_Horizontal.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -15086,7 +15098,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 9e56115d-59bd-4b10-b256-547b76a70c00) - (at -108.204 22.5025 90) + (at -22.098 28.5985 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -15129,7 +15141,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp 9e7e476c-61bd-4900-b254-745c2b332005) - (at 128.925 238.001) + (at 129.794 145.796 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -15159,10 +15171,10 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp db07d17c-d8d5-4619-99d0-5a51389b9e0e)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e6e93ff2-4455-48a0-8dfa-4d306850f00b)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp feb8c4bf-4ee5-4be3-8154-701736de27e2)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 142 "Net-(C144-Pad2)") (pintype "passive") (tstamp a6fb7a68-abb1-446c-95a8-2aa2157e8bf1)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 143 "VGG2") (pintype "passive") (tstamp af361ef2-ea0e-49a2-922d-5e7c52881f54)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 140 "Net-(C144-Pad2)") (pintype "passive") (tstamp a6fb7a68-abb1-446c-95a8-2aa2157e8bf1)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 141 "VGG2") (pintype "passive") (tstamp af361ef2-ea0e-49a2-922d-5e7c52881f54)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -15172,7 +15184,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp 9f31afb4-8645-482d-abe7-ce94543537fc) - (at 144.195 223.051) + (at 116.332 66.548 180) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -15203,10 +15215,10 @@ (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 8675f23a-c21a-4e00-b612-1a1a912b1a18)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp a84460af-6815-476c-be58-6e850bf56b81)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp f12ecc6d-9ee4-411b-a634-6dea947bcb94)) - (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 456f4285-7308-44e3-8ca1-318116f1ff7b)) - (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 152 "Net-(C156-Pad2)") (pintype "passive") (tstamp cc19e676-df9b-4981-a19d-40459d6a58fe)) + (pad "2" smd roundrect (at 0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 149 "Net-(C156-Pad2)") (pintype "passive") (tstamp cc19e676-df9b-4981-a19d-40459d6a58fe)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -15258,9 +15270,53 @@ ) ) + (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEF0) (tstamp a0818a22-9818-4dea-9d28-4e0c4780d94d) + (at 121.412 78.232 180) + (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") + (tags "inductor handsolder") + (property "MPN" "LQW2UAS1R0x0CL") + (property "Need_order" "0") + (property "Sheetfile" "ant_switch.kicad_sch") + (property "Sheetname" "Antenna Switch") + (path "/2eb25ee2-d512-42fe-80f1-00400ed0a45e/3c4bdb2a-0312-40af-af31-ee7314223aaa") + (attr smd) + (fp_text reference "L48" (at 0 -2.05) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 879f9fa1-c141-4eb8-9035-f734c96910c6) + ) + (fp_text value "1uH" (at 0 2.05) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 288af970-ba07-455e-bc70-ce46a6e16af2) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.62 0.62) (thickness 0.09))) + (tstamp c5f8581b-526e-4a5b-a0bd-eceaa3e1fb26) + ) + (fp_line (start -0.261252 1.11) (end 0.261252 1.11) (layer "F.SilkS") (width 0.12) (tstamp 973a9e5c-1583-4a69-94aa-2895311f2a5a)) + (fp_line (start -0.261252 -1.11) (end 0.261252 -1.11) (layer "F.SilkS") (width 0.12) (tstamp 9e0171a2-791b-4b92-adb4-f16da7213b79)) + (fp_line (start -2.12 -1.35) (end 2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 3b3db039-c563-4613-80f3-c09c20494a8a)) + (fp_line (start 2.12 1.35) (end -2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp 61e068c1-1cd3-48d3-a561-fab10e7a4001)) + (fp_line (start -2.12 1.35) (end -2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 86c17d42-e451-448e-a725-e85b7e1f05a2)) + (fp_line (start 2.12 -1.35) (end 2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp d4f9a606-b148-4c66-8932-e753c0224a0c)) + (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 196cb354-52fc-47c1-a86a-1492559f4312)) + (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 302d9488-94ea-4568-8e61-483f5d7bea78)) + (fp_line (start 1.25 -1) (end 1.25 1) (layer "F.Fab") (width 0.1) (tstamp 3514dc6a-24fc-499c-8148-d1356be7b4cc)) + (fp_line (start 1.25 1) (end -1.25 1) (layer "F.Fab") (width 0.1) (tstamp c4768750-d78c-4d2e-9262-24e945fa19a5)) + (pad "1" smd roundrect (at -1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 161 "Net-(C116-Pad1)") (pinfunction "1") (pintype "passive") (tstamp a7b42981-daee-459f-9692-96f5f50e329c)) + (pad "2" smd roundrect (at 1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 355 "/Antenna Switch/V_{PIN}") (pinfunction "2") (pintype "passive") (tstamp 4af7fba8-0846-4ef7-ad75-3c2ac791ddfc)) + (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp a16f96db-3aed-4e15-b4a6-8b254b608169) - (at 151.605 212.841) + (at 133.858 164.592 180) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM2165C2A511JA01D") @@ -15291,10 +15347,10 @@ (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp bed1d728-f6e0-4078-b67d-16fd4bfc02dc)) (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp db7f4aa2-3f06-4c4d-bca5-70e65905d7ec)) (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp f996d571-7875-4ee0-b747-6f75d76f978d)) - (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (pad "1" smd roundrect (at -1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 61467397-fa66-486a-ac37-e0d26703e173)) - (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 148 "Net-(C149-Pad1)") (pintype "passive") (tstamp 36ffc983-9b19-4a9b-96d8-8b029f5d1013)) + (pad "2" smd roundrect (at 1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 361 "/PA 70MHz/V_{DD}") (pintype "passive") (tstamp 36ffc983-9b19-4a9b-96d8-8b029f5d1013)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -15304,7 +15360,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp a1a322a3-19b5-4aa2-8a50-037593a222f8) - (at 168.475 199.391) + (at 140.716 144.272 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -15334,10 +15390,10 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 1e1736bf-28ba-4b27-84db-b0ed424f510c)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp b497c802-fa78-4cfd-87b8-0971ce30adfd)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp b59f9e7f-d5b3-41c2-b063-5bdc0057cd52)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 137 "Net-(C140-Pad1)") (pintype "passive") (tstamp 92b142b3-7106-4225-b11e-fc955215e2a2)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 141 "Net-(C144-Pad1)") (pintype "passive") (tstamp 00b51e9d-bb77-402a-9eeb-fd7a24af4b57)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 135 "Net-(C140-Pad1)") (pintype "passive") (tstamp 92b142b3-7106-4225-b11e-fc955215e2a2)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 139 "Net-(C144-Pad1)") (pintype "passive") (tstamp 00b51e9d-bb77-402a-9eeb-fd7a24af4b57)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -15423,7 +15479,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 54 "Net-(C48-Pad1)") (pintype "passive") (tstamp 647978ca-c986-47e8-968f-9ebc0f38695a)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 293 "Net-(Q10-Pad1)") (pintype "passive") (tstamp 5cde6a3c-bde0-43a0-9dd0-2ec2c04a91c5)) + (net 283 "Net-(Q10-Pad1)") (pintype "passive") (tstamp 5cde6a3c-bde0-43a0-9dd0-2ec2c04a91c5)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -15464,9 +15520,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp ca54075e-add1-4c64-9d8f-d43fcb04291d)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp f41934c4-4198-459e-bbf3-ea210e8bfbf2)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 311 "Net-(R31-Pad1)") (pintype "passive") (tstamp 0694ac78-e537-42fb-85bc-16a55de55827)) + (net 301 "Net-(R31-Pad1)") (pintype "passive") (tstamp 0694ac78-e537-42fb-85bc-16a55de55827)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 312 "Net-(R31-Pad2)") (pintype "passive") (tstamp 89c14e55-58a7-4fbd-b46f-1d9232cd1314)) + (net 302 "Net-(R31-Pad2)") (pintype "passive") (tstamp 89c14e55-58a7-4fbd-b46f-1d9232cd1314)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -15551,9 +15607,9 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e9c8904b-e547-4118-9f09-02047b383f33)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp fe4adfb6-7cda-4af9-86fd-592a29b204b9)) (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 160 "Net-(C169-Pad1)") (pintype "passive") (tstamp 8ce8a161-7774-48d7-a01a-d191aa0c2ee1)) + (net 154 "Net-(C169-Pad1)") (pintype "passive") (tstamp 8ce8a161-7774-48d7-a01a-d191aa0c2ee1)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 336 "/Control on separate board/PWM_CW") (pintype "passive") (tstamp b1f9a844-38ca-48dd-9498-8d95b4ecd0ee)) + (net 325 "/Control on separate board/PWM_CW") (pintype "passive") (tstamp b1f9a844-38ca-48dd-9498-8d95b4ecd0ee)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -15563,7 +15619,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp a4b00fbe-6f3e-46d6-b47c-a639f58bf6a8) - (at 144.425 220.291) + (at 133.858 162.56 180) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "C2012C0G1H333J125AA") @@ -15594,10 +15650,10 @@ (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp c36f9ca7-a569-4458-bd21-18f846e488ed)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp cbd2bee7-c3f4-44ca-951e-b78f13653159)) (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp e10f4c01-6ccd-4da5-8a7c-991a254d6f25)) - (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (pad "1" smd roundrect (at -1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 4f0a988a-fbc7-4733-a333-27f9b387a185)) - (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 148 "Net-(C149-Pad1)") (pintype "passive") (tstamp 41ca2cae-c8ba-4866-b70b-e9859c91fe6d)) + (pad "2" smd roundrect (at 1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 361 "/PA 70MHz/V_{DD}") (pintype "passive") (tstamp 41ca2cae-c8ba-4866-b70b-e9859c91fe6d)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -15655,9 +15711,9 @@ (pad "1" thru_hole circle (at 6.5 0 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "1") (pintype "passive") (tstamp 9f50df94-cabc-4c86-bce9-3a9231ef2a74)) (pad "2" thru_hole circle (at 6.5 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) - (net 328 "/Control on separate board/BTN0") (pinfunction "2") (pintype "passive") (tstamp 92de8b0a-5214-4606-89f7-0c2a7ed11835)) + (net 317 "/Control on separate board/BTN0") (pinfunction "2") (pintype "passive") (tstamp 92de8b0a-5214-4606-89f7-0c2a7ed11835)) (pad "2" thru_hole circle (at 0 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) - (net 328 "/Control on separate board/BTN0") (pinfunction "2") (pintype "passive") (tstamp ee9e75d6-8b48-4900-afd8-f41ed339b230)) + (net 317 "/Control on separate board/BTN0") (pinfunction "2") (pintype "passive") (tstamp ee9e75d6-8b48-4900-afd8-f41ed339b230)) (model "${KICAD6_3DMODEL_DIR}/Button_Switch_THT.3dshapes/SW_PUSH_6mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -15755,7 +15811,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp a66ee2a0-1fad-4ba7-a006-e3c59ecf2fcd) - (at 184.404 44.45 -90) + (at 189.23 34.29 -90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -15799,7 +15855,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp a6d6d917-a88e-49a1-b30a-705885dad3f1) - (at 133.285 216.311) + (at 156.718 153.67 -90) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -15807,21 +15863,21 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-000060567ba3") (attr exclude_from_pos_files) - (fp_text reference "H21" (at 0 -3.8) (layer "F.SilkS") + (fp_text reference "H21" (at 0 -3.8 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp b7869b9c-2022-477d-b3a8-243252719e05) ) - (fp_text value "M3" (at 0 3.8) (layer "F.Fab") + (fp_text value "M3" (at 0 3.8 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 9268d2dc-210f-4033-b1fd-a5a1956b6d58) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 3428e9fe-6680-48f7-a1c3-69532c38d972) ) (fp_circle (center 0 0) (end 2.8 0) (layer "Cmts.User") (width 0.15) (fill none) (tstamp 2ee5e63c-7470-444e-9ebd-752c0cf98c84)) (fp_circle (center 0 0) (end 3.05 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp fb1e3b21-054c-4917-a2c3-744edb85806d)) - (pad "1" thru_hole circle (at 0 0) (size 5.6 5.6) (drill 3.2) (layers *.Cu *.Mask) + (pad "1" thru_hole circle (at 0 0 270) (size 5.6 5.6) (drill 3.2) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "1") (pintype "input") (tstamp 57cd450a-2154-449d-8bbd-e023ca1d87ff)) ) @@ -15871,7 +15927,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp a78a4462-d486-4062-a3a7-10397af62f91) - (at 102.87 55.88) + (at 100.2265 55.88) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -15902,7 +15958,7 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp c27b96fd-8510-4456-b78a-73217842f482)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp e7227341-1a74-4c96-ac4c-0991a04500cf)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 250 "/Baseband/VHF_IN") (pintype "passive") (tstamp 4704e1f3-2015-46c1-aef9-7505b71d0373)) + (net 243 "/Baseband/VHF_IN") (pintype "passive") (tstamp 4704e1f3-2015-46c1-aef9-7505b71d0373)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 233c51ce-1088-48e3-90c7-2bc80a847b3b)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -15914,7 +15970,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp a8bb4894-9b2c-4478-9dac-58d3950071e6) - (at 165.735 208.661) + (at 126.746 -12.7 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -15922,15 +15978,15 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-000060692d65") (attr smd) - (fp_text reference "R135" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R135" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp e521f637-25dc-4b73-aa62-04b0dba486f1) ) - (fp_text value "DNF" (at 0 1.43) (layer "F.Fab") + (fp_text value "DNF" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 9dfc45c9-ab49-4bee-9fa3-6f9103a85bad) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 9cc87d4b-0377-4e7c-904b-7a7483abe3fd) ) @@ -15944,10 +16000,10 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 4c1576da-d191-4566-9ee8-5519115d4375)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 7e093482-dc49-4742-af39-34b5b95120c0)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp d854972b-0754-4c1c-aac7-bd19dc439ea8)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 321 "Net-(R135-Pad1)") (pintype "passive") (tstamp ba582f5e-568e-456b-82d5-88f86a3787ec)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 252 "/PA 70MHz/PA_IN") (pintype "passive") (tstamp dea93624-4783-49f0-88ec-0be0cd41874d)) + (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 2 "GND") (pintype "passive") (tstamp ba582f5e-568e-456b-82d5-88f86a3787ec)) + (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 358 "/TX_to_PA") (pintype "passive") (tstamp dea93624-4783-49f0-88ec-0be0cd41874d)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -16086,7 +16142,7 @@ (pad "1" thru_hole rect (at 0 0 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 66 "Net-(C56-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 06b632ef-f19e-4466-8b6c-eb228b8621c8)) (pad "2" thru_hole oval (at 0 2.54 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 260 "Net-(J24-Pad7)") (pinfunction "2") (pintype "passive") (tstamp 93291404-af6a-4035-982e-84223d5b550f)) + (net 251 "Net-(J24-Pad7)") (pinfunction "2") (pintype "passive") (tstamp 93291404-af6a-4035-982e-84223d5b550f)) (pad "3" thru_hole oval (at 0 5.08 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "3") (pintype "passive") (tstamp f90d6763-b525-43d5-8e9a-5a7a996b4c5e)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x03_P2.54mm_Vertical.wrl" @@ -16098,7 +16154,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp ab3323b2-7bf3-4efe-83a6-95c811ba53dc) - (at 166.624 55.118) + (at 167.132 47.752) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -16142,7 +16198,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp ab442f81-fb4e-4648-8118-73ea0127da65) - (at 124.575 238.001) + (at 140.716 142.748 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -16172,10 +16228,10 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 2409636d-351c-4882-8bed-7e129967c6f8)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 2fd587bd-ecfb-47ce-ac08-e731355cfd6f)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 4d9897fe-c05e-4686-90fc-5f5ddf96fe38)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 137 "Net-(C140-Pad1)") (pintype "passive") (tstamp 30531f33-864b-47fd-8efe-1be22b706ade)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 141 "Net-(C144-Pad1)") (pintype "passive") (tstamp e0006723-80ac-42f3-91d8-eb7b6100d3b3)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 135 "Net-(C140-Pad1)") (pintype "passive") (tstamp 30531f33-864b-47fd-8efe-1be22b706ade)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 139 "Net-(C144-Pad1)") (pintype "passive") (tstamp e0006723-80ac-42f3-91d8-eb7b6100d3b3)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -16185,7 +16241,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp ab50f954-b318-4ea3-b893-bab40d018432) - (at -95.504 28.194 -90) + (at -9.398 34.29 -90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -16218,7 +16274,7 @@ (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 5 "+9VA") (pintype "passive") (tstamp fdc17d1b-82be-42c0-93a7-f8839ce3ab2b)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 288 "Net-(Q2-Pad4)") (pintype "passive") (tstamp 75075574-1fa6-4c8c-ac1e-981f2570715d)) + (net 279 "Net-(Q2-Pad4)") (pintype "passive") (tstamp 75075574-1fa6-4c8c-ac1e-981f2570715d)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -16304,7 +16360,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 68 "Net-(C58-Pad1)") (pintype "passive") (tstamp c10ec037-1a25-4655-a86f-918e7a8be93b)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 297 "Net-(Q13-Pad1)") (pintype "passive") (tstamp 25c34589-ab99-4628-bfb6-8e4f9b902dff)) + (net 287 "Net-(Q13-Pad1)") (pintype "passive") (tstamp 25c34589-ab99-4628-bfb6-8e4f9b902dff)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -16346,7 +16402,7 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 7a7d45a3-8103-4c05-94dc-181232990096)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 8962cb5c-cffe-4813-8267-3176dbd1c352)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 174 "Net-(D9-Pad1)") (pintype "passive") (tstamp 20bf87fc-cad3-4203-9e4c-7d37fa2f23d6)) + (net 168 "Net-(D9-Pad1)") (pintype "passive") (tstamp 20bf87fc-cad3-4203-9e4c-7d37fa2f23d6)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 64 "Net-(C55-Pad1)") (pintype "passive") (tstamp 7141c2ac-356d-4906-a6c3-04ff8bc2085e)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -16358,7 +16414,7 @@ (footprint "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" (layer "F.Cu") (tedit 5D9F72B1) (tstamp ad36673f-271c-4b52-a3f6-27dc9aa8fde8) - (at -90.932 27.178) + (at -4.826 33.274) (descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "SOIC SO") (property "MPN" "IRF7309TRPBF") @@ -16395,19 +16451,19 @@ (pad "1" smd roundrect (at -2.475 -1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "S") (pintype "passive") (tstamp 369480b2-0e4f-4cbe-b8f6-12b995e031d3)) (pad "2" smd roundrect (at -2.475 -0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 239 "/EN_VRX") (pinfunction "G") (pintype "input") (tstamp 72bfe644-e23e-4e5a-a564-ad986817c47f)) + (net 232 "/EN_VRX") (pinfunction "G") (pintype "input") (tstamp 72bfe644-e23e-4e5a-a564-ad986817c47f)) (pad "3" smd roundrect (at -2.475 0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 5 "+9VA") (pinfunction "1") (pintype "passive") (tstamp 2dbc7e2c-c94a-4784-8d62-3c11cdced139)) (pad "4" smd roundrect (at -2.475 1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 288 "Net-(Q2-Pad4)") (pinfunction "G") (pintype "input") (tstamp 62c51e61-2a78-401d-b2e7-435deeaf359a)) + (net 279 "Net-(Q2-Pad4)") (pinfunction "G") (pintype "input") (tstamp 62c51e61-2a78-401d-b2e7-435deeaf359a)) (pad "5" smd roundrect (at 2.475 1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 35 "+VRX") (pinfunction "D") (pintype "passive") (tstamp 0e6864d2-329e-41c8-9341-783dbf6fee2c)) (pad "6" smd roundrect (at 2.475 0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 35 "+VRX") (pinfunction "D") (pintype "passive") (tstamp d7f197f4-b407-4757-b790-99ae0b66e7c6)) (pad "7" smd roundrect (at 2.475 -0.635) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 288 "Net-(Q2-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 5f6e56c0-d475-4e09-aba7-b2e08b1d6275)) + (net 279 "Net-(Q2-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 5f6e56c0-d475-4e09-aba7-b2e08b1d6275)) (pad "8" smd roundrect (at 2.475 -1.905) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 288 "Net-(Q2-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 6cf556db-1307-4464-abfc-eb62d2a8d5f4)) + (net 279 "Net-(Q2-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 6cf556db-1307-4464-abfc-eb62d2a8d5f4)) (model "${KICAD6_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -16488,11 +16544,11 @@ (fp_line (start -1.5 0.3) (end -1.5 -0.8) (layer "F.Fab") (width 0.1) (tstamp 58e216fc-9ef8-4580-b085-780a2cdf6fa4)) (fp_line (start -1 0.8) (end -1.5 0.3) (layer "F.Fab") (width 0.1) (tstamp 723b2f13-c210-4c84-b4ba-792d89885ae8)) (pad "1" smd rect (at -1.2 0 270) (size 0.4 3.2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 334 "/Control on separate board/XTAL1") (pinfunction "1") (pintype "passive") (tstamp 24b1e5d9-22f8-4e1d-a422-c4687d7c7752)) + (net 323 "/Control on separate board/XTAL1") (pinfunction "1") (pintype "passive") (tstamp 24b1e5d9-22f8-4e1d-a422-c4687d7c7752)) (pad "2" smd rect (at 0 0 270) (size 0.4 3.2) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 17b51ca7-18b0-4452-8da4-b5489439d642)) (pad "3" smd rect (at 1.2 0 270) (size 0.4 3.2) (layers "F.Cu" "F.Paste" "F.Mask") - (net 335 "/Control on separate board/XTAL2") (pinfunction "3") (pintype "passive") (tstamp 29a05a64-975c-4cec-8d28-96ffc4c374c2)) + (net 324 "/Control on separate board/XTAL2") (pinfunction "3") (pintype "passive") (tstamp 29a05a64-975c-4cec-8d28-96ffc4c374c2)) (model "${KICAD6_3DMODEL_DIR}/Crystal.3dshapes/Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -16502,7 +16558,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp aec76c9e-6473-48bd-9c73-4e657e6c63d4) - (at 151.605 209.831) + (at 134.112 72.994 -90) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A560JXAMC") @@ -16511,15 +16567,15 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/d9cc8b31-63e7-4d0e-aa25-b6ed7e2e4890") (attr smd) - (fp_text reference "C162" (at 0 -1.68) (layer "F.SilkS") + (fp_text reference "C162" (at 0 -1.68 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp eb0bcfb0-f328-4d74-b8b7-7cca89dd9350) ) - (fp_text value "56pF" (at 0 1.68) (layer "F.Fab") + (fp_text value "56pF" (at 0 1.68 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 45c5f6fc-ea4b-4df2-a5bc-c645ccf02466) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.5 0.5) (thickness 0.08))) (tstamp 765e340f-c1b1-4766-88ec-70d113efed92) ) @@ -16533,10 +16589,10 @@ (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 52a787f2-f037-47ab-bb0d-0b8f72a53c46)) (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp 8183859e-b4c1-45c2-a44e-355de3f9fa08)) (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp c5ff05fb-68b6-49a2-8c55-a164f33807a4)) - (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (pad "1" smd roundrect (at -1.0375 0 270) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp c4c012b5-0e21-479a-b8ca-7b7e446a9184)) - (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 155 "Net-(C162-Pad2)") (pintype "passive") (tstamp 96964685-9b00-466b-9442-66a691bb5098)) + (pad "2" smd roundrect (at 1.0375 0 270) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 19 "/Antenna Switch/TX") (pintype "passive") (tstamp 96964685-9b00-466b-9442-66a691bb5098)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -16577,7 +16633,7 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 66e691d7-39e8-4c21-bc31-6dd9d4b51a30)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 89e28a35-5be7-4b8b-8bc2-d7813887a673)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 312 "Net-(R31-Pad2)") (pintype "passive") (tstamp 04a8d6fd-c080-4fc4-8ddd-d04ca4e0cd61)) + (net 302 "Net-(R31-Pad2)") (pintype "passive") (tstamp 04a8d6fd-c080-4fc4-8ddd-d04ca4e0cd61)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 15 "/BFO") (pintype "passive") (tstamp f787bea9-d9c5-448b-856a-8bb0800e859c)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -16636,31 +16692,31 @@ (fp_line (start -2.45 -6.4) (end -3.45 -5.4) (layer "F.Fab") (width 0.1) (tstamp c91b803c-1222-4648-9f1e-0161fbbe9ed9)) (fp_line (start -3.45 -5.4) (end -3.45 6.4) (layer "F.Fab") (width 0.1) (tstamp e1fdf1c5-cb9a-4ce1-aeb6-b06e4af31d73)) (pad "1" smd rect (at -4.4 -4.445) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 185 "Net-(D17-Pad3)") (pinfunction "TD+") (pintype "passive") (tstamp 5c6ccfe3-338f-4d0c-bf23-7ce790f43e5b)) + (net 179 "Net-(D17-Pad3)") (pinfunction "TD+") (pintype "passive") (tstamp 5c6ccfe3-338f-4d0c-bf23-7ce790f43e5b)) (pad "2" smd rect (at -4.4 -3.175) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "C_TD") (pintype "passive") (tstamp 7a48f061-1b79-4564-86f1-48f706179b09)) (pad "3" smd rect (at -4.4 -1.905) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 184 "Net-(D16-Pad3)") (pinfunction "TD-") (pintype "passive") (tstamp 549dae49-5ab2-4288-a95a-692175a3e357)) + (net 178 "Net-(D16-Pad3)") (pinfunction "TD-") (pintype "passive") (tstamp 549dae49-5ab2-4288-a95a-692175a3e357)) (pad "4" smd rect (at -4.4 -0.635) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp f32ddb8e-fe34-4549-a5ae-035bf8d50287)) (pad "5" smd rect (at -4.4 0.635) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp fc78d779-4d64-46ef-8791-e66901c8db1f)) (pad "6" smd rect (at -4.4 1.905) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 182 "Net-(D16-Pad1)") (pinfunction "RD+") (pintype "passive") (tstamp 5f9fad5e-25bc-4420-a3a1-61bdb730991f)) + (net 176 "Net-(D16-Pad1)") (pinfunction "RD+") (pintype "passive") (tstamp 5f9fad5e-25bc-4420-a3a1-61bdb730991f)) (pad "7" smd rect (at -4.4 3.175) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 102 "Net-(C90-Pad2)") (pinfunction "C_RD") (pintype "passive") (tstamp 3220c836-0b5d-4d92-a064-0f3840c387da)) (pad "8" smd rect (at -4.4 4.445) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 183 "Net-(D16-Pad2)") (pinfunction "RD-") (pintype "passive") (tstamp 6a2f580b-9166-4dfb-96c8-cb5b5acd6380)) + (net 177 "Net-(D16-Pad2)") (pinfunction "RD-") (pintype "passive") (tstamp 6a2f580b-9166-4dfb-96c8-cb5b5acd6380)) (pad "9" smd rect (at 4.4 4.445) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 177 "Net-(D11-Pad1)") (pinfunction "RX-") (pintype "passive") (tstamp 05853b29-6602-43e0-b87b-1aa40dc472d2)) + (net 171 "Net-(D11-Pad1)") (pinfunction "RX-") (pintype "passive") (tstamp 05853b29-6602-43e0-b87b-1aa40dc472d2)) (pad "10" smd rect (at 4.4 3.175) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 345 "unconnected-(TR1-Pad10)") (pinfunction "C_RX") (pintype "passive+no_connect") (tstamp abfdf163-f142-4798-853d-747b2a9b86e4)) + (net 334 "unconnected-(TR1-Pad10)") (pinfunction "C_RX") (pintype "passive+no_connect") (tstamp abfdf163-f142-4798-853d-747b2a9b86e4)) (pad "11" smd rect (at 4.4 1.905) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "RX+") (pintype "passive") (tstamp ed853c7d-ae6d-4e7e-ab4b-10c3a1a633c6)) (pad "12" smd rect (at 4.4 0.635) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp 77085913-fc21-461a-b851-321f8972c6ff)) (pad "13" smd rect (at 4.4 -0.635) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp 4256be6e-9cae-41f4-9f1c-4f99c982b4ac)) (pad "14" smd rect (at 4.4 -1.905) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 316 "Net-(R103-Pad2)") (pinfunction "TX-") (pintype "passive") (tstamp 9eac9ae7-441e-440a-83ec-c0fbb6289194)) + (net 306 "Net-(R103-Pad2)") (pinfunction "TX-") (pintype "passive") (tstamp 9eac9ae7-441e-440a-83ec-c0fbb6289194)) (pad "15" smd rect (at 4.4 -3.175) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 346 "unconnected-(TR1-Pad15)") (pinfunction "C_TX") (pintype "passive+no_connect") (tstamp c0ee325d-0440-4d35-b009-0224bbaff4f0)) + (net 335 "unconnected-(TR1-Pad15)") (pinfunction "C_TX") (pintype "passive+no_connect") (tstamp c0ee325d-0440-4d35-b009-0224bbaff4f0)) (pad "16" smd rect (at 4.4 -4.445) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "TX+") (pintype "passive") (tstamp 2827143e-788b-46d4-bfec-a34642914796)) (model "${KICAD6_3DMODEL_DIR}/Transformer_SMD.3dshapes/Transformer_Ethernet_Bourns_PT61017PEL.wrl" @@ -16703,7 +16759,7 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp caa63013-6f3a-452f-9697-125612d37a77)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp f08e759c-35d8-4a54-a703-c2df7c97fae5)) (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 296 "Net-(Q11-Pad3)") (pintype "passive") (tstamp c26f1d23-13c5-4caa-8b54-fc741cc4be76)) + (net 286 "Net-(Q11-Pad3)") (pintype "passive") (tstamp c26f1d23-13c5-4caa-8b54-fc741cc4be76)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 59 "Net-(C51-Pad2)") (pintype "passive") (tstamp d1c86c7c-8fa4-43b8-9825-79fecc1798bf)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -16715,7 +16771,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp b12ff3c8-b6d3-4425-8efc-7aad153c1f75) - (at 93.218 89.662 180) + (at 93.218 89.662) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -16745,9 +16801,9 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 2089a698-5dcf-44c3-8c46-7a888a9c8d12)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 9f8a7b12-ca51-4c38-a848-493148aa87f8)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp d592ff09-7612-4b11-92ad-7080dbce1a11)) - (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 68 "Net-(C58-Pad1)") (pintype "passive") (tstamp bf785406-f66a-4217-99f3-14ab2dd4f56b)) - (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 61 "Net-(C53-Pad1)") (pintype "passive") (tstamp 4300090d-126f-44a0-bce0-360d692f963d)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) @@ -16758,7 +16814,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp b146c1bf-c577-4790-86e3-5d02391282ea) - (at 97.282 46.228) + (at 94.742 46.213) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -16812,53 +16868,9 @@ (net 2 "GND") (pinfunction "1") (pintype "input") (tstamp 117a1cb8-bcda-40d9-9a11-ba7d2e284c6e)) ) - (footprint "Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder" (layer "F.Cu") - (tedit 5F68FEEF) (tstamp b1841d2e-8062-4d03-a976-d7d562714049) - (at 109.295 209.801) - (descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") - (tags "capacitor handsolder") - (property "MPN" "TAJA106K016RNJ") - (property "Need_order" "0") - (property "Sheetfile" "pa_70.kicad_sch") - (property "Sheetname" "PA 70MHz") - (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-0000606170c9") - (attr smd) - (fp_text reference "C154" (at 0 -1.85) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 1e9684d8-fa66-4be7-860f-c95ba76b26dd) - ) - (fp_text value "10uF" (at 0 1.85) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp cf7ec534-c049-45ed-adfa-cfbfa2b75031) - ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 0.8 0.8) (thickness 0.12))) - (tstamp d9f60349-b8ff-4b19-ab57-8866dda2d79a) - ) - (fp_line (start -0.711252 0.91) (end 0.711252 0.91) (layer "F.SilkS") (width 0.12) (tstamp dab37661-c08e-4d41-a10e-16823aa1a426)) - (fp_line (start -0.711252 -0.91) (end 0.711252 -0.91) (layer "F.SilkS") (width 0.12) (tstamp e3f5233c-9820-4bac-9986-377b9f53ad09)) - (fp_line (start 2.48 -1.15) (end 2.48 1.15) (layer "F.CrtYd") (width 0.05) (tstamp 4bab64ae-43d5-4092-be05-d47099fb97d3)) - (fp_line (start -2.48 -1.15) (end 2.48 -1.15) (layer "F.CrtYd") (width 0.05) (tstamp 6f0ccc9f-1169-4c7a-b49e-1b302fcc077c)) - (fp_line (start 2.48 1.15) (end -2.48 1.15) (layer "F.CrtYd") (width 0.05) (tstamp 912710b4-edcb-42af-91ec-a2e9fd1e065c)) - (fp_line (start -2.48 1.15) (end -2.48 -1.15) (layer "F.CrtYd") (width 0.05) (tstamp e759374d-dbf0-4ea6-9ae5-b396ec8176f4)) - (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer "F.Fab") (width 0.1) (tstamp 3e250fe8-fc49-4c59-bad6-026684f719f5)) - (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer "F.Fab") (width 0.1) (tstamp 518f63ae-9588-40b6-ba5e-0e1519ec6478)) - (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer "F.Fab") (width 0.1) (tstamp 59276105-be6f-4a7c-9e26-c3e5ed5394ab)) - (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer "F.Fab") (width 0.1) (tstamp 9f292357-496b-4088-b8bd-0812cac76f87)) - (pad "1" smd roundrect (at -1.5625 0) (size 1.325 1.8) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) - (net 150 "/PA 70MHz/VG_5V") (pintype "passive") (tstamp ec4ce95b-bf8c-4040-8eb4-5222a4e2ce02)) - (pad "2" smd roundrect (at 1.5625 0) (size 1.325 1.8) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) - (net 2 "GND") (pintype "passive") (tstamp 974c2bae-ec8e-4086-8f02-826b01ac193d)) - (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1206_3216Metric.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp b26c05ec-265b-489d-b08c-520108ec6ccd) - (at 191.008 34.29 180) + (at 177.546 29.21 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -16867,15 +16879,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/41eadb78-7a77-4c7b-936d-2808b8bbc497") (attr smd) - (fp_text reference "C124" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "C124" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 201d0d5d-fdaf-485a-9e5c-972e47b0914c) ) - (fp_text value "36pF" (at 0 1.43) (layer "F.Fab") + (fp_text value "36pF" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp afb8361d-e56f-4654-9fce-a4d361bf4ba2) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 4347a361-9d79-4432-a3c6-210aaf433c35) ) @@ -16889,9 +16901,9 @@ (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 54910723-0e8c-428c-9b61-535ea40dc3d0)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp b7ba7d3f-ed8c-4d80-bd3d-bd57d3853978)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp c7f3b54c-bfe6-4767-96b7-57ad3b23a210)) - (pad "1" smd roundrect (at -0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp e68b1d7b-7182-4a3f-a3ec-629650c9423a)) - (pad "2" smd roundrect (at 0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "2" smd roundrect (at 0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 125 "Net-(C121-Pad1)") (pintype "passive") (tstamp 280201bd-9b4e-4e48-9754-955cc4deb1c1)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) @@ -16930,7 +16942,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp b33b1413-ed63-471e-abdc-44808a032ecd) - (at 81.788 25.654 180) + (at 64.516 27.178 -90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -16938,15 +16950,15 @@ (property "Sheetname" "Baseband") (path "/691ab6db-80d5-4c97-9e5f-aae234327d27/c59952e7-c26f-418d-a751-67f74299b239") (attr smd) - (fp_text reference "R103" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "R103" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp ff6ae964-7756-457d-973c-908fcdb9c981) ) - (fp_text value "150" (at 0 1.43) (layer "F.Fab") + (fp_text value "150" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 68abb55b-8a79-4704-be16-e83b50f8e995) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 433b394d-6d22-4e3f-a844-2d2664854f2f) ) @@ -16960,10 +16972,10 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 41d4f9b5-962f-48cd-9e0d-26fa6c8b1140)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 7709823b-0448-4c37-8435-78585c35feb6)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 7c4cfeac-d569-4cca-96f0-6f8c758db270)) - (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 4ab7bd69-00c7-485f-971b-19cd06a7afb4)) - (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 316 "Net-(R103-Pad2)") (pintype "passive") (tstamp 50d5b58c-39b5-49ec-b021-82c3ddef6bed)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 306 "Net-(R103-Pad2)") (pintype "passive") (tstamp 50d5b58c-39b5-49ec-b021-82c3ddef6bed)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -16973,7 +16985,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp b38865aa-1c8a-4712-b4fd-027f47de08ff) - (at 172.825 199.391) + (at 159.004 140.462 180) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM188R71H104KA93D") @@ -17004,10 +17016,10 @@ (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 6ee2341f-bf55-4871-9b53-f624b273a360)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 83e62a5a-afeb-4158-834e-914f6ec6f6fc)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp d8b02918-abec-48f0-a711-58ddbdf500ee)) - (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 06b544ee-f94a-4540-b3b4-ee61792f3644)) - (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 136 "VGG1") (pintype "passive") (tstamp c3187f8e-a568-4a4f-8247-d85853e4ac9d)) + (pad "2" smd roundrect (at 0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 134 "VGG1") (pintype "passive") (tstamp c3187f8e-a568-4a4f-8247-d85853e4ac9d)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -17098,7 +17110,7 @@ (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 91 "Net-(C78-Pad1)") (pinfunction "B") (pintype "input") (tstamp 394d03b7-7b66-4f5e-8019-0fccdd5c8934)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 301 "Net-(Q18-Pad2)") (pinfunction "E") (pintype "passive") (tstamp a0838fb0-65fb-4b1e-9654-9822a65d6564)) + (net 291 "Net-(Q18-Pad2)") (pinfunction "E") (pintype "passive") (tstamp a0838fb0-65fb-4b1e-9654-9822a65d6564)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 84 "Net-(C72-Pad1)") (pinfunction "C") (pintype "passive") (tstamp bf325f4e-9430-4200-9533-fe1249525306)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" @@ -17232,7 +17244,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp b618bb88-1a11-4cfb-892b-ffa62e5a61b8) - (at 102.87 54.356) + (at 100.2265 54.356) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -17263,7 +17275,7 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp d40b8658-d601-4452-8a73-50d3cdec3ace)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp f8d0d607-679d-42e0-b5ed-38974d7fa841)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 315 "Net-(R93-Pad1)") (pintype "passive") (tstamp b624b25a-a920-473a-951a-883295eb496f)) + (net 305 "Net-(R93-Pad1)") (pintype "passive") (tstamp b624b25a-a920-473a-951a-883295eb496f)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp c50d381f-2227-45cd-bfce-174075bf257d)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -17395,57 +17407,9 @@ (net 2 "GND") (pinfunction "1") (pintype "input") (tstamp 07569785-d806-4023-95c8-cd917fa204cd)) ) - (footprint "Package_TO_SOT_SMD:SOT-23_Handsoldering" (layer "F.Cu") - (tedit 5A0AB76C) (tstamp b748fc5f-a1f1-42cc-8852-99bc1f02bd78) - (at -86.106 83.312) - (descr "SOT-23, Handsoldering") - (tags "SOT-23") - (property "MPN" "BAT18") - (property "Need_order" "0") - (property "Sheetfile" "kicad-dart-70.kicad_sch") - (property "Sheetname" "") - (path "/0b14ffde-378e-478d-8691-440e08a63312") - (attr smd) - (fp_text reference "D2" (at 0 -2.5) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp f44dddef-6cec-4e16-b509-12f376aa137a) - ) - (fp_text value "BAT18" (at 0 2.5) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 611ef953-733a-425d-8c13-54094055c031) - ) - (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") - (effects (font (size 0.5 0.5) (thickness 0.075))) - (tstamp c64ab036-5b02-4cd4-9e45-004e796445f4) - ) - (fp_line (start 0.76 1.58) (end 0.76 0.65) (layer "F.SilkS") (width 0.12) (tstamp 4ad94ff1-b40e-428d-b009-f5a27144ae20)) - (fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer "F.SilkS") (width 0.12) (tstamp 5caac941-4432-498f-ae91-d13f0d965414)) - (fp_line (start 0.76 1.58) (end -0.7 1.58) (layer "F.SilkS") (width 0.12) (tstamp dfe889f1-ebcb-494c-9e41-062cdb675b9a)) - (fp_line (start 0.76 -1.58) (end -2.4 -1.58) (layer "F.SilkS") (width 0.12) (tstamp f500437d-8f06-4b85-a4e1-49f36d91aea4)) - (fp_line (start 2.7 1.75) (end -2.7 1.75) (layer "F.CrtYd") (width 0.05) (tstamp 6873030f-a2fd-48b1-8b79-67f6d2be9279)) - (fp_line (start -2.7 -1.75) (end 2.7 -1.75) (layer "F.CrtYd") (width 0.05) (tstamp 80452a77-a62d-4c1d-9362-4f1e5c6890c6)) - (fp_line (start 2.7 -1.75) (end 2.7 1.75) (layer "F.CrtYd") (width 0.05) (tstamp c80885aa-3974-4b7f-9faf-03d48af07b81)) - (fp_line (start -2.7 1.75) (end -2.7 -1.75) (layer "F.CrtYd") (width 0.05) (tstamp e596f2a2-b34e-4173-8143-399d0d5e4ed5)) - (fp_line (start -0.7 -0.95) (end -0.7 1.5) (layer "F.Fab") (width 0.1) (tstamp 05071b78-671d-49c9-ac21-3dea9f5dca0c)) - (fp_line (start -0.7 -0.95) (end -0.15 -1.52) (layer "F.Fab") (width 0.1) (tstamp 7619bcff-26a3-4d7d-98af-b2db27ffdc32)) - (fp_line (start -0.15 -1.52) (end 0.7 -1.52) (layer "F.Fab") (width 0.1) (tstamp 8019eae9-8cee-4836-910c-08fc98bec07d)) - (fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp b79a726d-bca7-4863-8eda-69718ae9489b)) - (fp_line (start -0.7 1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp b9e5f67b-7d62-413f-90f6-0fa6d13c8edc)) - (pad "1" smd rect (at -1.5 -0.95) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 167 "Net-(D2-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 16c3228f-ec1c-4414-b8af-4d793fb11a72)) - (pad "2" smd rect (at -1.5 0.95) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp 7fbb0240-36a5-4a83-b37a-cc8d3e3b7c77)) - (pad "3" smd rect (at 1.5 0) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 19 "Net-(C17-Pad2)") (pinfunction "K") (pintype "passive") (tstamp e91370bc-a499-4fca-8691-d73a5e5bb0d6)) - (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp b76c45da-019b-4571-b4a2-3bf1590392f7) - (at 129.615 235.241) + (at 150.114 143.383) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "885612007040/VJ0805A102GXXPW1BC") @@ -17477,9 +17441,9 @@ (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp eaf93349-eb14-46cc-b6b3-1af397397c20)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp f747f500-feb8-41dc-bb49-210929dd9d1f)) (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 139 "Net-(C143-Pad1)") (pintype "passive") (tstamp 14664d55-3d83-4667-89f6-7c2bcfa740ed)) + (net 137 "Net-(C143-Pad1)") (pintype "passive") (tstamp 14664d55-3d83-4667-89f6-7c2bcfa740ed)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 140 "Net-(C143-Pad2)") (pintype "passive") (tstamp d5847c5f-7a0e-4492-a0f2-14d8afcc0ecb)) + (net 138 "Net-(C143-Pad2)") (pintype "passive") (tstamp d5847c5f-7a0e-4492-a0f2-14d8afcc0ecb)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -17489,7 +17453,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp b79582ba-1f47-425a-8bfb-50fb6bf80a8c) - (at 100.33 55.118 -90) + (at 97.6865 55.118 -90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -17520,9 +17484,52 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp ca78a05b-8667-469a-a438-fbce8c665771)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp d1a499b1-1620-4dfc-b7f7-92a9194788d0)) (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 315 "Net-(R93-Pad1)") (pintype "passive") (tstamp 6482b198-467a-4e66-b500-894a17ada67f)) + (net 305 "Net-(R93-Pad1)") (pintype "passive") (tstamp 6482b198-467a-4e66-b500-894a17ada67f)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 250 "/Baseband/VHF_IN") (pintype "passive") (tstamp a05a7c7d-b23f-4954-a106-a55fbcbb8199)) + (net 243 "/Baseband/VHF_IN") (pintype "passive") (tstamp a05a7c7d-b23f-4954-a106-a55fbcbb8199)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEEE) (tstamp b7e0daf2-cb0c-404a-8253-1e70501c6217) + (at 116.586 80.772 180) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor handsolder") + (property "Need_order" "0") + (property "Sheetfile" "ant_switch.kicad_sch") + (property "Sheetname" "Antenna Switch") + (path "/2eb25ee2-d512-42fe-80f1-00400ed0a45e/cb4e6116-71be-4743-813c-79e91dc420a8") + (attr smd) + (fp_text reference "R133" (at 0 -1.43) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 18ff3658-e186-44b7-9ccd-045043205cef) + ) + (fp_text value "560" (at 0 1.43) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 79664394-0d3a-4aec-a597-73cf4dc837ea) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.4 0.4) (thickness 0.06))) + (tstamp 94862c39-653d-4ad2-b107-539321db04b4) + ) + (fp_line (start -0.254724 0.5225) (end 0.254724 0.5225) (layer "F.SilkS") (width 0.12) (tstamp 1973c65f-aa16-4a9f-9b74-00878b378e89)) + (fp_line (start -0.254724 -0.5225) (end 0.254724 -0.5225) (layer "F.SilkS") (width 0.12) (tstamp cbb0d7ab-acbe-487f-bf59-f39b690aee22)) + (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp 0ae808b8-a34c-428d-8f10-ca2d75f5ca27)) + (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer "F.CrtYd") (width 0.05) (tstamp 4b0d1a51-27d7-41d1-bba6-417eb70f59bd)) + (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp 817c7dca-b43a-483b-b8ad-eacad6e4f84f)) + (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer "F.CrtYd") (width 0.05) (tstamp c0b5112d-eacc-402b-8b71-5a4bc63a0bd1)) + (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 61bf6fa6-96c8-449a-86ed-104b08633c37)) + (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 9ac28b49-57e1-4b74-92ad-11b392ab8862)) + (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp af5c74d7-db2c-4c27-8ee5-1c574ecf37ae)) + (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp dc5c387b-52dd-44f1-a628-db3072f9be8c)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 353 "Net-(C119-Pad1)") (pintype "passive") (tstamp af9e400b-7c19-4872-b6d1-94f3202d404f)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 8 "+5VA") (pintype "passive") (tstamp dbe22282-4bf8-445b-b126-b1a2189c6098)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -17563,7 +17570,7 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 835242f5-f174-4abf-9bb7-bf346d37a30f)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c340b451-c087-472a-a2a9-0025706ec8f5)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 256 "+VTX") (pintype "passive") (tstamp 3a324e59-6d5c-4af7-8c6f-973830f03797)) + (net 247 "+VTX") (pintype "passive") (tstamp 3a324e59-6d5c-4af7-8c6f-973830f03797)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 63 "Net-(C54-Pad2)") (pintype "passive") (tstamp 30b1636d-5038-404e-9c31-7b9af86b1744)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -17656,13 +17663,13 @@ (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "AA") (pintype "passive") (tstamp fe3982f6-b980-4252-bff9-d0cff6ef2d08)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 314 "Net-(R36-Pad1)") (pinfunction "AB") (pintype "passive") (tstamp 512ca092-a3e0-4c57-935b-57a04bc3c68e)) + (net 304 "Net-(R36-Pad1)") (pinfunction "AB") (pintype "passive") (tstamp 512ca092-a3e0-4c57-935b-57a04bc3c68e)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 170 "Net-(D6-Pad1)") (pinfunction "SA") (pintype "passive") (tstamp 0e51e140-c255-49d4-a555-9f6b405389c0)) + (net 164 "Net-(D6-Pad1)") (pinfunction "SA") (pintype "passive") (tstamp 0e51e140-c255-49d4-a555-9f6b405389c0)) (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 47 "Net-(C44-Pad2)") (pinfunction "SC") (pintype "passive") (tstamp 77eaa4f4-e461-4ac0-afac-89a06fea38da)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 171 "Net-(D6-Pad2)") (pinfunction "SB") (pintype "passive") (tstamp 88610715-ae63-4daf-98e1-69d9d4db58c6)) + (net 165 "Net-(D6-Pad2)") (pinfunction "SB") (pintype "passive") (tstamp 88610715-ae63-4daf-98e1-69d9d4db58c6)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x05_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -17716,7 +17723,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp ba9d8140-66ec-4818-9a27-3daa85b42cf4) - (at 183.896 61.976 180) + (at 187.96 66.548 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -17725,15 +17732,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/0a81b59d-b4a6-43f6-ae3c-a1bc0151f39d") (attr smd) - (fp_text reference "C112" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "C112" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp ffb06e99-e7ea-4666-8f3a-a4048a4b2a58) ) - (fp_text value "18pF" (at 0 1.43) (layer "F.Fab") + (fp_text value "18pF" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 8b225b22-ad34-4894-a6d6-c737681125ea) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 3cd191c5-769c-4b1a-b09a-0fd8cfb4ae55) ) @@ -17747,9 +17754,9 @@ (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 593feb58-c3ce-48b2-acda-66863872c602)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 93073c50-ce5a-410a-8dcf-3b47248b9faa)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp b4a421a8-00a9-4c98-99ff-0febdad78fdc)) - (pad "1" smd roundrect (at -0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 118 "Net-(C112-Pad1)") (pintype "passive") (tstamp 249c8d16-371f-493e-824a-12dea39e3d99)) - (pad "2" smd roundrect (at 0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "2" smd roundrect (at 0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 119 "Net-(C112-Pad2)") (pintype "passive") (tstamp 193805ae-5321-4f92-9e3c-c66e741c0cc4)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) @@ -17836,7 +17843,7 @@ (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 68 "Net-(C58-Pad1)") (pintype "passive") (tstamp 6da7c192-d345-473b-b999-cc0136b0ddca)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 172 "Net-(D7-Pad2)") (pintype "passive") (tstamp 1afa24da-be67-4a54-bcf6-39f904b68cc8)) + (net 166 "Net-(D7-Pad2)") (pintype "passive") (tstamp 1afa24da-be67-4a54-bcf6-39f904b68cc8)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -17879,7 +17886,7 @@ (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp ae50467c-ae50-44e9-bcac-875e3dc69729)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 314 "Net-(R36-Pad1)") (pintype "passive") (tstamp a78a918e-4856-4725-8303-a2e5d6102994)) + (net 304 "Net-(R36-Pad1)") (pintype "passive") (tstamp a78a918e-4856-4725-8303-a2e5d6102994)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -17917,7 +17924,7 @@ (footprint "Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical" (layer "F.Cu") (tedit 59FED5CC) (tstamp bc50b8df-a476-4ea3-8314-123b099dbbf8) - (at 97.282 51.069) + (at 94.742 51.054) (descr "Through hole straight pin header, 1x08, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x08 2.54mm single row") (property "MPN" "SSW-108-01-G-S") @@ -17954,15 +17961,15 @@ (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp d092783e-203e-4c21-bc90-2991a1ba17d0)) (fp_line (start -1.27 19.05) (end -1.27 -0.635) (layer "F.Fab") (width 0.1) (tstamp f0a8438b-4224-4425-a46f-b00c75f88ae2)) (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 362 "unconnected-(J13-Pad1)") (pinfunction "Pin_1") (pintype "passive") (tstamp 6e42aa5a-d253-48ed-a41b-8e4639ccb804)) + (net 350 "unconnected-(J13-Pad1)") (pinfunction "Pin_1") (pintype "passive") (tstamp 6e42aa5a-d253-48ed-a41b-8e4639ccb804)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_2") (pintype "passive") (tstamp 06af4f29-1334-4f03-834a-6ba346b89bf7)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 250 "/Baseband/VHF_IN") (pinfunction "Pin_3") (pintype "passive") (tstamp b4e7ad15-6d5d-47c3-a5e8-59ce5d21a310)) + (net 243 "/Baseband/VHF_IN") (pinfunction "Pin_3") (pintype "passive") (tstamp b4e7ad15-6d5d-47c3-a5e8-59ce5d21a310)) (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_4") (pintype "passive") (tstamp d8ed5592-7c78-4d4d-8004-ece00aa8a52c)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 354 "Net-(D1-Pad1)") (pinfunction "Pin_5") (pintype "passive") (tstamp 07216cc4-62f5-40fb-bd73-0eee47932cea)) + (net 343 "/Antenna Switch/RX") (pinfunction "Pin_5") (pintype "passive") (tstamp 07216cc4-62f5-40fb-bd73-0eee47932cea)) (pad "6" thru_hole oval (at 0 12.7) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_6") (pintype "passive") (tstamp d1ef85ef-9908-4749-bb63-0afb85db2b56)) (pad "7" thru_hole oval (at 0 15.24) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) @@ -18136,7 +18143,7 @@ (fp_circle (center 0 0) (end 0 0.95) (layer "F.SilkS") (width 0.12) (fill none) (tstamp 0c1eb8f7-29cc-4c3a-9e54-5b8543639126)) (fp_circle (center 0 0) (end 1.25 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp 6c9bb5b7-42cf-4ab3-bde3-72f6030f11e7)) (pad "1" smd circle (at 0 0) (size 1.5 1.5) (layers "F.Cu" "F.Mask") - (net 311 "Net-(R31-Pad1)") (pinfunction "1") (pintype "passive") (tstamp e1b61ab3-5898-4f6b-b36c-57bec00745bd)) + (net 301 "Net-(R31-Pad1)") (pinfunction "1") (pintype "passive") (tstamp e1b61ab3-5898-4f6b-b36c-57bec00745bd)) ) (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") @@ -18175,7 +18182,7 @@ (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp b44cea44-d52c-4eeb-ab19-aef2b2dbcc1a)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 350 "/+3V3_CLK") (pintype "passive") (tstamp e3524a53-2a19-42e2-a4ac-cc4386909b11)) + (net 339 "/+3V3_CLK") (pintype "passive") (tstamp e3524a53-2a19-42e2-a4ac-cc4386909b11)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -18185,7 +18192,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp be709ea7-2ee1-4c7f-bbee-e503b99438b7) - (at 166.624 65.786) + (at 167.132 63.246) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -18270,7 +18277,7 @@ (pad "1" thru_hole rect (at 0 0 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 82 "Net-(C70-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 4d709d6d-b99f-45af-b1d5-eb20153d8661)) (pad "2" thru_hole oval (at 0 2.54 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 257 "Net-(J24-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 51e5a222-732d-466b-b88c-1efac53dd4b4)) + (net 248 "Net-(J24-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 51e5a222-732d-466b-b88c-1efac53dd4b4)) (pad "3" thru_hole oval (at 0 5.08 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "3") (pintype "passive") (tstamp 5f2c9884-e5e8-4e5e-817e-4ed0173fa40c)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x03_P2.54mm_Vertical.wrl" @@ -18282,7 +18289,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp c02bb9f5-6d49-4f33-a091-d662c8b21f01) - (at 134.195 233.751) + (at 117.602 49.022 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -18291,15 +18298,15 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/b427847b-04fa-42fe-812e-8fac1ec1ede8") (attr smd) - (fp_text reference "C156" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "C156" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 60ceead9-557c-47bb-9c62-c20d507c47ae) ) - (fp_text value "47pF" (at 0 1.43) (layer "F.Fab") + (fp_text value "47pF" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 260640b6-01e7-4dae-8a07-7adc5611b62f) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 7cb0379c-0c9d-4557-96da-27c2ba327e49) ) @@ -18313,10 +18320,10 @@ (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 67dcd58d-428e-4133-bc53-5468e63a2c5d)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 6ac8279c-76e0-4c68-addf-1f1219fa6500)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp b064fa8f-9186-406d-819a-a2ec8f940e65)) - (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp f3918cc7-1bc7-482d-89a8-26ee0d0b3bf2)) - (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 152 "Net-(C156-Pad2)") (pintype "passive") (tstamp a68934ff-a439-43d0-b847-3234d05ad737)) + (pad "2" smd roundrect (at 0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 149 "Net-(C156-Pad2)") (pintype "passive") (tstamp a68934ff-a439-43d0-b847-3234d05ad737)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -18326,7 +18333,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp c0447ca1-f4e6-4e84-878e-fccf08f33554) - (at 80.264 28.956 180) + (at 74.676 42.418) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -18356,10 +18363,10 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp d221b6c1-5e92-4ac2-9adb-ec8ccd4844cc)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp d6692648-b450-4450-aaaa-c505baecc30a)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e8f4ae4b-efe5-443e-a910-760ae4aa090e)) - (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 317 "Net-(R104-Pad2)") (pintype "passive") (tstamp 0e4f979c-c4d8-4df2-be72-0722889dbcaf)) - (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 278 "/LO1") (pintype "passive") (tstamp 113cd952-ef20-41d0-ba16-87f7efe3fd07)) + (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 307 "Net-(R104-Pad2)") (pintype "passive") (tstamp 0e4f979c-c4d8-4df2-be72-0722889dbcaf)) + (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 269 "/LO1") (pintype "passive") (tstamp 113cd952-ef20-41d0-ba16-87f7efe3fd07)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -18369,7 +18376,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp c17f698d-2f67-4f49-94a4-90c0f59ea5a1) - (at 165.608 90.424 180) + (at 166.878 90.424 180) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "VJ0805A103KXJTBC") @@ -18411,54 +18418,6 @@ ) ) - (footprint "Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical" (layer "F.Cu") - (tedit 59FED5CC) (tstamp c1b5e5db-9b08-4b5a-81a4-99240067b723) - (at 120.142 154.935) - (descr "Through hole straight pin header, 1x02, 2.54mm pitch, single row") - (tags "Through hole pin header THT 1x02 2.54mm single row") - (property "Need_order" "0") - (property "Sheetfile" "kicad-dart-70.kicad_sch") - (property "Sheetname" "") - (path "/b4b20c36-c5d4-4b91-b7e3-6b399891b7c8") - (attr through_hole) - (fp_text reference "J18" (at 0 -2.33) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 3f181453-6c9b-4945-b7d3-5c2843fef49c) - ) - (fp_text value "PA OUT" (at 0 4.87) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp a28a1809-b45d-4f89-8f63-3d2da8d92f29) - ) - (fp_text user "${REFERENCE}" (at 0 1.27 90) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp bf26a81e-2622-45a6-a493-466405827900) - ) - (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer "F.SilkS") (width 0.12) (tstamp 0aa760e7-df9f-4c0d-a451-154452341cec)) - (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer "F.SilkS") (width 0.12) (tstamp 16b752a3-7dea-4e4d-bff8-79652dccd661)) - (fp_line (start -1.33 0) (end -1.33 -1.33) (layer "F.SilkS") (width 0.12) (tstamp 64023119-8f34-48ab-9505-75ac4c5db94e)) - (fp_line (start -1.33 1.27) (end -1.33 3.87) (layer "F.SilkS") (width 0.12) (tstamp 96ecff0a-0165-4bcf-8f95-163add648d3d)) - (fp_line (start -1.33 3.87) (end 1.33 3.87) (layer "F.SilkS") (width 0.12) (tstamp b65f1296-5746-4b91-a38b-3bc898692fea)) - (fp_line (start 1.33 1.27) (end 1.33 3.87) (layer "F.SilkS") (width 0.12) (tstamp d175c356-6384-4d3e-8e20-1b58b2da5c22)) - (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp 06a5dc10-6945-4ccc-aae3-ebbb6cde0664)) - (fp_line (start -1.8 4.35) (end 1.8 4.35) (layer "F.CrtYd") (width 0.05) (tstamp 4754cfe3-d90e-4e94-907e-cb6de45a28d0)) - (fp_line (start 1.8 4.35) (end 1.8 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp 9639b30f-e19a-4485-bf2d-0b913434276b)) - (fp_line (start -1.8 -1.8) (end -1.8 4.35) (layer "F.CrtYd") (width 0.05) (tstamp a0f9a0ee-5767-4066-b547-1b65f4bfe0dc)) - (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp 29afbde0-96a0-4f8a-8350-cb3e87fbd251)) - (fp_line (start 1.27 -1.27) (end 1.27 3.81) (layer "F.Fab") (width 0.1) (tstamp 7e20f888-c652-464e-9d38-48a1aed748ca)) - (fp_line (start 1.27 3.81) (end -1.27 3.81) (layer "F.Fab") (width 0.1) (tstamp c66fc7f3-cdce-421c-8cf1-e7953d233ff3)) - (fp_line (start -1.27 3.81) (end -1.27 -0.635) (layer "F.Fab") (width 0.1) (tstamp dfd8f9b4-4a37-4a4c-ba4b-dcbbead47b6a)) - (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp fc47285c-0dca-4895-bb84-57bca04c027a)) - (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 156 "/PA 70MHz/PA_OUT") (pinfunction "In") (pintype "passive") (tstamp 74fab0e6-e7bb-4175-b12d-d0ea6ba7f7e2)) - (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "Ext") (pintype "passive") (tstamp 33a39c4f-c857-4ff7-9754-8ef392e83d5d)) - (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp c21c8432-8836-4917-a2f1-4f03464c82ff) (at 77.6235 46.482) @@ -18549,7 +18508,7 @@ (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp c2e0e6ce-1646-4c71-9bc8-5b76cac5a634) - (at 166.624 61.468) + (at 167.132 56.896) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -18580,7 +18539,7 @@ (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 5abab90a-0a41-4eb8-afe1-4a736a1889ab)) (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp 68d12ed9-ea25-4057-9eb5-c8233005fd46)) (pad "1" smd roundrect (at -1 0) (size 1.2 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.208333) - (net 283 "Net-(L23-Pad2)") (pintype "passive") (tstamp 66f0e0db-58a0-40b8-bcb7-592a6f9d6831)) + (net 274 "Net-(L23-Pad2)") (pintype "passive") (tstamp 66f0e0db-58a0-40b8-bcb7-592a6f9d6831)) (pad "2" smd roundrect (at 1 0) (size 1.2 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.208333) (net 2 "GND") (pintype "passive") (tstamp df39f159-4022-4529-936a-63acb18776ad)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" @@ -18592,7 +18551,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp c31ed7d5-d596-492c-ab77-359cd3e2fd7e) - (at 79.248 26.416 -90) + (at 64.516 30.48 -90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -18623,9 +18582,9 @@ (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 47090056-8eba-4898-a565-36a0a652c2e3)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 52bae117-969f-4d41-83f2-6dbb57f83855)) (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 316 "Net-(R103-Pad2)") (pintype "passive") (tstamp f5a2ae6d-70d5-43f5-a044-0667565b49f5)) + (net 306 "Net-(R103-Pad2)") (pintype "passive") (tstamp f5a2ae6d-70d5-43f5-a044-0667565b49f5)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 317 "Net-(R104-Pad2)") (pintype "passive") (tstamp 38186e2d-90b3-447d-8046-d207004d05ef)) + (net 307 "Net-(R104-Pad2)") (pintype "passive") (tstamp 38186e2d-90b3-447d-8046-d207004d05ef)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -18672,13 +18631,13 @@ (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp d092771c-6e58-4192-90f8-891ddc7f89c9)) (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp f27f38f1-4445-40b3-8380-e9d232a89730)) (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 261 "/Control on separate board/DISP_LAT") (pinfunction "Pin_1") (pintype "passive+no_connect") (tstamp 76ddc5e0-70bf-4d31-a5db-f5d335de67ac)) + (net 252 "/Control on separate board/DISP_LAT") (pinfunction "Pin_1") (pintype "passive+no_connect") (tstamp 76ddc5e0-70bf-4d31-a5db-f5d335de67ac)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 262 "/Control on separate board/I2C2_SDA") (pinfunction "Pin_2") (pintype "passive") (tstamp 9865ea0c-b515-40d9-8497-581e17f6c4d7)) + (net 253 "/Control on separate board/I2C2_SDA") (pinfunction "Pin_2") (pintype "passive") (tstamp 9865ea0c-b515-40d9-8497-581e17f6c4d7)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 263 "/Control on separate board/I2C2_SCL") (pinfunction "Pin_3") (pintype "passive") (tstamp dd3e8a71-04a2-4230-b1c6-f7a1efd9cb2c)) + (net 254 "/Control on separate board/I2C2_SCL") (pinfunction "Pin_3") (pintype "passive") (tstamp dd3e8a71-04a2-4230-b1c6-f7a1efd9cb2c)) (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 166 "/Control on separate board/5V") (pinfunction "Pin_4") (pintype "passive") (tstamp 4a971764-6f9e-4fbc-be36-7fb92ad65721)) + (net 160 "/Control on separate board/5V") (pinfunction "Pin_4") (pintype "passive") (tstamp 4a971764-6f9e-4fbc-be36-7fb92ad65721)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_5") (pintype "passive") (tstamp 3120cb3a-9163-48f4-b4c4-2a6e97218727)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x05_P2.54mm_Vertical.wrl" @@ -18690,7 +18649,7 @@ (footprint "Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp c3f1d13e-0932-4d7a-bd34-254ceff3752b) - (at 171.45 56.896 -90) + (at 171.958 52.324 -90) (descr "Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2BASR33G00L") @@ -18722,9 +18681,9 @@ (fp_line (start -1 -0.6) (end 1 -0.6) (layer "F.Fab") (width 0.1) (tstamp c37e7fdd-9440-4271-be6d-1b987cde521a)) (fp_line (start 1 0.6) (end -1 0.6) (layer "F.Fab") (width 0.1) (tstamp fa197a8f-0dac-4f98-82c0-8609ee0f7517)) (pad "1" smd roundrect (at -1.025 0 270) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 266 "Net-(C93-Pad1)") (pinfunction "1") (pintype "passive") (tstamp dddf4dd5-aff3-49af-bc7e-846da99b0c41)) + (net 257 "Net-(C93-Pad1)") (pinfunction "1") (pintype "passive") (tstamp dddf4dd5-aff3-49af-bc7e-846da99b0c41)) (pad "2" smd roundrect (at 1.025 0 270) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 282 "Net-(L21-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 017a4c9b-4221-476d-a78f-ac64a9b9de3b)) + (net 273 "Net-(L21-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 017a4c9b-4221-476d-a78f-ac64a9b9de3b)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -18771,7 +18730,7 @@ (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 79 "Net-(C68-Pad1)") (pinfunction "B") (pintype "input") (tstamp b7f3c457-6efe-4ab2-a9bf-ea819f1b8870)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 300 "Net-(Q16-Pad2)") (pinfunction "E") (pintype "passive") (tstamp 176a8347-fa6d-4cdb-9569-77cf428f690e)) + (net 290 "Net-(Q16-Pad2)") (pinfunction "E") (pintype "passive") (tstamp 176a8347-fa6d-4cdb-9569-77cf428f690e)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 75 "Net-(C65-Pad1)") (pinfunction "C") (pintype "passive") (tstamp a0cac205-e77e-4a74-9d38-fe589632a3cf)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" @@ -18783,7 +18742,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp c517c3ba-95ce-4439-9b6a-2038cd3bbbaa) - (at 223.266 26.67) + (at 223.012 25.908) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -18868,50 +18827,6 @@ ) ) - (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") - (tedit 5F68FEEF) (tstamp c59f0167-01e9-4664-bff1-0b9b1e60cc4c) - (at -86.11 86.946) - (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") - (tags "capacitor handsolder") - (property "MPN" "VJ0805A103KXJTBC") - (property "Need_order" "0") - (property "Sheetfile" "kicad-dart-70.kicad_sch") - (property "Sheetname" "") - (path "/86ca03ff-8141-4a03-985c-93358a30876c") - (attr smd) - (fp_text reference "C17" (at 0 -1.68) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 88ebe478-d3f3-4085-ab2e-83790a24de1d) - ) - (fp_text value "10nF" (at 0 1.68) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp a22a9b1f-c208-437d-94bb-b80ea340af10) - ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 0.5 0.5) (thickness 0.08))) - (tstamp 03146e69-424a-4b3a-9094-0702bb049ca5) - ) - (fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer "F.SilkS") (width 0.12) (tstamp 56521530-78c2-4821-b086-29206151bb7f)) - (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer "F.SilkS") (width 0.12) (tstamp b4e1ccde-01ec-4f60-829a-d98da6bd9124)) - (fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer "F.CrtYd") (width 0.05) (tstamp 2d378beb-c83e-4765-a936-972d0d4692a6)) - (fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer "F.CrtYd") (width 0.05) (tstamp 4c2449f9-bf08-4043-bfc4-9f0dd472c1a5)) - (fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer "F.CrtYd") (width 0.05) (tstamp 736d90d8-7fb0-47d8-876c-c3f8e6cbddc2)) - (fp_line (start 1.88 0.98) (end -1.88 0.98) (layer "F.CrtYd") (width 0.05) (tstamp cf4bc6c5-478e-4025-ae04-3c85ebc23e8a)) - (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 4f2ed6f1-a16d-4b2b-956c-69086c4d9534)) - (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 61cfce3f-eff9-4bde-a2e7-4347193166c1)) - (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp 7519fa53-382d-4673-84e0-e32afc5f53f4)) - (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp b4842e46-ca56-48c8-bd12-ab170fa4a142)) - (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 18 "Net-(C17-Pad1)") (pintype "passive") (tstamp 99f4ae14-68ea-44dc-8dbb-3946543d2b4f)) - (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) - (net 19 "Net-(C17-Pad2)") (pintype "passive") (tstamp 13635ce2-24c2-4d97-9e32-6a5375f9aeb4)) - (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp c5e17a49-0400-4cff-872e-495c6000b419) (at 91.44 56.388 -90) @@ -18947,7 +18862,7 @@ (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 94 "Net-(C81-Pad1)") (pintype "passive") (tstamp b64aa7e2-c091-450c-a3de-39b138b5083b)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 303 "Net-(Q21-Pad1)") (pintype "passive") (tstamp 45a4130a-903d-4935-9bf9-c8ee63ca8b77)) + (net 293 "Net-(Q21-Pad1)") (pintype "passive") (tstamp 45a4130a-903d-4935-9bf9-c8ee63ca8b77)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -18989,9 +18904,9 @@ (fp_arc (start -1.23 -1.469694) (mid 4.17 0.000016) (end -1.230016 1.469666) (layer "F.Fab") (width 0.1) (tstamp 362a5144-d6cf-40c7-b71d-7c2b76811c0a)) (fp_circle (center 1.27 0) (end 3.77 0) (layer "F.Fab") (width 0.1) (fill none) (tstamp 1197e6c5-6660-4887-9362-13f4c8ed0143)) (pad "1" thru_hole rect (at 0 0 90) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask) - (net 192 "/Control on separate board/STATUSn") (pinfunction "K") (pintype "passive") (tstamp 67b7288d-032e-4b6a-9470-965da24d8080)) + (net 186 "/Control on separate board/STATUSn") (pinfunction "K") (pintype "passive") (tstamp 67b7288d-032e-4b6a-9470-965da24d8080)) (pad "2" thru_hole circle (at 2.54 0 90) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask) - (net 193 "Net-(D23-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 0ff68b6d-105d-43ac-9d64-4621c4f443f1)) + (net 187 "Net-(D23-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 0ff68b6d-105d-43ac-9d64-4621c4f443f1)) (model "${KICAD6_3DMODEL_DIR}/LED_THT.3dshapes/LED_D5.0mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -19001,7 +18916,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp c6246caf-36a4-4096-94e3-6d4503a1faf0) - (at 153.355 218.111) + (at 131.318 133.858) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "GRM188R71H104KA93D") @@ -19035,7 +18950,7 @@ (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 1ece7a4d-8d8f-4c82-a4e3-befb1044f103)) (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 150 "/PA 70MHz/VG_5V") (pintype "passive") (tstamp 3c405e80-eb17-4483-b51d-536c3e4d0f50)) + (net 147 "/PA 70MHz/VG_5V") (pintype "passive") (tstamp 3c405e80-eb17-4483-b51d-536c3e4d0f50)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -19080,7 +18995,7 @@ (fp_line (start -0.65 -1.125) (end -0.325 -1.45) (layer "F.Fab") (width 0.1) (tstamp c958f95b-021f-4e60-9992-64b37fb15dad)) (fp_line (start -0.325 -1.45) (end 0.65 -1.45) (layer "F.Fab") (width 0.1) (tstamp cd4b4b3c-0802-44e8-94b5-ed1d5e9982f6)) (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 301 "Net-(Q18-Pad2)") (pinfunction "D") (pintype "passive") (tstamp 50cc3888-50f0-42b8-b56c-23443e55faa8)) + (net 291 "Net-(Q18-Pad2)") (pinfunction "D") (pintype "passive") (tstamp 50cc3888-50f0-42b8-b56c-23443e55faa8)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 86 "Net-(C73-Pad2)") (pinfunction "S") (pintype "passive") (tstamp 360d0504-30ea-48c5-9568-357fad94a9ad)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) @@ -19094,7 +19009,7 @@ (footprint "mpb:PLD-1.5W" (layer "F.Cu") (tedit 5FBA9FA6) (tstamp c6a40114-e757-4d76-9f8d-5ac6378428ac) - (at 124.9 208.506) + (at 150.114 153.67) (property "Need_order" "0") (property "Sheetfile" "pa_70.kicad_sch") (property "Sheetname" "PA 70MHz") @@ -19122,9 +19037,9 @@ (fp_line (start -3.75 -3) (end -2.75 -3) (layer "F.SilkS") (width 0.15) (tstamp d87d7cef-b225-4122-ac71-9a4444e89aff)) (fp_line (start 2.75 -2.75) (end 2.75 -3) (layer "F.SilkS") (width 0.15) (tstamp e9b36344-6534-474a-a14a-c19c985f8644)) (pad "1" smd rect locked (at 0 -3.5) (size 5 3.16) (layers "F.Cu" "F.Paste" "F.Mask") - (net 285 "Net-(L39-Pad2)") (pinfunction "G") (pintype "input") (tstamp 1a4ee0a3-c082-4f94-97c0-0a087bc688ad)) + (net 276 "Net-(L39-Pad2)") (pinfunction "G") (pintype "input") (tstamp 1a4ee0a3-c082-4f94-97c0-0a087bc688ad)) (pad "2" smd rect locked (at 0 3.5) (size 5 3.16) (layers "F.Cu" "F.Paste" "F.Mask") - (net 145 "Net-(C147-Pad2)") (pinfunction "D") (pintype "passive") (tstamp 0d25026e-b98b-4ce5-9c0b-3c4f7678d077)) + (net 143 "Net-(C147-Pad2)") (pinfunction "D") (pintype "passive") (tstamp 0d25026e-b98b-4ce5-9c0b-3c4f7678d077)) (pad "3" thru_hole circle locked (at 3 -0.6) (size 0.6 0.6) (drill 0.5) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "S") (pintype "passive") (tstamp 01564bb0-df5a-483e-a4e1-9f2605b36842)) (pad "3" smd rect locked (at 0 0) (size 8.1 2.25) (layers "F.Cu" "F.Paste" "F.Mask") @@ -19193,7 +19108,7 @@ (fp_line (start 64.2 8.5) (end 64.2 22.5) (layer "F.SilkS") (width 0.12) (tstamp cca7fb1f-7886-45c8-85fa-ba204c229f04)) (fp_line (start -8.13 -2.64) (end -7.34 -2.64) (layer "F.SilkS") (width 0.12) (tstamp d0112992-dd8d-48db-991e-406798b7cd2a)) (fp_line (start -8.14 33.64) (end 72.14 33.64) (layer "F.SilkS") (width 0.12) (tstamp fba883a8-4a74-4301-b921-43b2cb9522fa)) - (fp_arc (start 64.20104 22.49932) (mid 64.054473 22.853115) (end 63.70066 22.9997) (layer "F.SilkS") (width 0.12) (tstamp 5333b943-ce83-473c-84a0-3da323b881cb)) + (fp_arc (start 64.20104 22.49932) (mid 64.054479 22.85315) (end 63.70066 22.9997) (layer "F.SilkS") (width 0.12) (tstamp 5333b943-ce83-473c-84a0-3da323b881cb)) (fp_arc (start -0.29972 8.49884) (mid -0.153162 8.145018) (end 0.20066 7.99846) (layer "F.SilkS") (width 0.12) (tstamp 8a89ab9f-c91f-4995-bd36-d43f7e1e354d)) (fp_arc (start 63.7 8) (mid 64.053553 8.146447) (end 64.2 8.5) (layer "F.SilkS") (width 0.12) (tstamp 99c93122-78d3-4d9d-9cb1-2cf52c400c9c)) (fp_arc (start 0.20066 22.9997) (mid -0.153162 22.853142) (end -0.29972 22.49932) (layer "F.SilkS") (width 0.12) (tstamp d8530cbd-07cd-4517-be0f-c44546371b32)) @@ -19213,37 +19128,37 @@ (pad "" thru_hole circle (at -5.4991 31.0007) (size 3 3) (drill 2.5) (layers *.Cu *.Mask) (tstamp c42dbef2-6531-49ff-8569-0c7ed8bd98d7)) (pad "" thru_hole circle (at 69.49948 31.0007) (size 3 3) (drill 2.5) (layers *.Cu *.Mask) (tstamp dc7bb499-a0d2-4ad1-b176-bedd3c8e05a1)) (pad "1" thru_hole rect (at 0 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 194 "unconnected-(DS1-Pad1)") (pinfunction "VSS") (pintype "power_in+no_connect") (tstamp 1d10fc72-1b13-481d-b732-bfdda665242c)) + (net 188 "unconnected-(DS1-Pad1)") (pinfunction "VSS") (pintype "power_in+no_connect") (tstamp 1d10fc72-1b13-481d-b732-bfdda665242c)) (pad "2" thru_hole oval (at 2.54 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 195 "unconnected-(DS1-Pad2)") (pinfunction "VDD") (pintype "power_in+no_connect") (tstamp 8842548c-b760-402a-91f0-a9406d4dc760)) + (net 189 "unconnected-(DS1-Pad2)") (pinfunction "VDD") (pintype "power_in+no_connect") (tstamp 8842548c-b760-402a-91f0-a9406d4dc760)) (pad "3" thru_hole oval (at 5.08 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 196 "unconnected-(DS1-Pad3)") (pinfunction "VO") (pintype "input+no_connect") (tstamp a917aaa7-7ab4-4c76-ae7f-1b3a5c511e2e)) + (net 190 "unconnected-(DS1-Pad3)") (pinfunction "VO") (pintype "input+no_connect") (tstamp a917aaa7-7ab4-4c76-ae7f-1b3a5c511e2e)) (pad "4" thru_hole oval (at 7.62 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 197 "unconnected-(DS1-Pad4)") (pinfunction "RS") (pintype "input+no_connect") (tstamp 97e2dc91-4ea4-4621-a573-92738459f51f)) + (net 191 "unconnected-(DS1-Pad4)") (pinfunction "RS") (pintype "input+no_connect") (tstamp 97e2dc91-4ea4-4621-a573-92738459f51f)) (pad "5" thru_hole oval (at 10.16 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 198 "unconnected-(DS1-Pad5)") (pinfunction "R/W") (pintype "input+no_connect") (tstamp d3e9d96c-2e4d-4e87-895c-3355325a4e67)) + (net 192 "unconnected-(DS1-Pad5)") (pinfunction "R/W") (pintype "input+no_connect") (tstamp d3e9d96c-2e4d-4e87-895c-3355325a4e67)) (pad "6" thru_hole oval (at 12.7 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 199 "unconnected-(DS1-Pad6)") (pinfunction "E") (pintype "input+no_connect") (tstamp d6c96b3b-3f8d-439c-8283-a72a9b67cfc4)) + (net 193 "unconnected-(DS1-Pad6)") (pinfunction "E") (pintype "input+no_connect") (tstamp d6c96b3b-3f8d-439c-8283-a72a9b67cfc4)) (pad "7" thru_hole oval (at 15.24 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 200 "unconnected-(DS1-Pad7)") (pinfunction "D0") (pintype "input+no_connect") (tstamp 5a03285a-673e-482a-9976-127cc75719e1)) + (net 194 "unconnected-(DS1-Pad7)") (pinfunction "D0") (pintype "input+no_connect") (tstamp 5a03285a-673e-482a-9976-127cc75719e1)) (pad "8" thru_hole oval (at 17.78 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 201 "unconnected-(DS1-Pad8)") (pinfunction "D1") (pintype "input+no_connect") (tstamp 20ae0b46-f94c-41e7-8b80-9a6cb86e64fb)) + (net 195 "unconnected-(DS1-Pad8)") (pinfunction "D1") (pintype "input+no_connect") (tstamp 20ae0b46-f94c-41e7-8b80-9a6cb86e64fb)) (pad "9" thru_hole oval (at 20.32 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 202 "unconnected-(DS1-Pad9)") (pinfunction "D2") (pintype "input+no_connect") (tstamp 974e2148-c5c9-4da1-9025-408f26d64930)) + (net 196 "unconnected-(DS1-Pad9)") (pinfunction "D2") (pintype "input+no_connect") (tstamp 974e2148-c5c9-4da1-9025-408f26d64930)) (pad "10" thru_hole oval (at 22.86 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 203 "unconnected-(DS1-Pad10)") (pinfunction "D3") (pintype "input+no_connect") (tstamp 53607bb3-8f40-487b-aa53-bf0fe57d64d8)) + (net 197 "unconnected-(DS1-Pad10)") (pinfunction "D3") (pintype "input+no_connect") (tstamp 53607bb3-8f40-487b-aa53-bf0fe57d64d8)) (pad "11" thru_hole oval (at 25.4 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 204 "unconnected-(DS1-Pad11)") (pinfunction "D4") (pintype "input+no_connect") (tstamp ae4653cc-7f91-4054-8d6e-e866564a7b08)) + (net 198 "unconnected-(DS1-Pad11)") (pinfunction "D4") (pintype "input+no_connect") (tstamp ae4653cc-7f91-4054-8d6e-e866564a7b08)) (pad "12" thru_hole oval (at 27.94 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 205 "unconnected-(DS1-Pad12)") (pinfunction "D5") (pintype "input+no_connect") (tstamp 6243b824-6ff2-4fbf-8191-488faede0540)) + (net 199 "unconnected-(DS1-Pad12)") (pinfunction "D5") (pintype "input+no_connect") (tstamp 6243b824-6ff2-4fbf-8191-488faede0540)) (pad "13" thru_hole oval (at 30.48 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 206 "unconnected-(DS1-Pad13)") (pinfunction "D6") (pintype "input+no_connect") (tstamp 0578c8ce-fd6b-45a2-a884-7f6114053ae3)) + (net 200 "unconnected-(DS1-Pad13)") (pinfunction "D6") (pintype "input+no_connect") (tstamp 0578c8ce-fd6b-45a2-a884-7f6114053ae3)) (pad "14" thru_hole oval (at 33.02 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 207 "unconnected-(DS1-Pad14)") (pinfunction "D7") (pintype "input+no_connect") (tstamp fcea1626-f680-4ead-9118-c7dc76da2d30)) + (net 201 "unconnected-(DS1-Pad14)") (pinfunction "D7") (pintype "input+no_connect") (tstamp fcea1626-f680-4ead-9118-c7dc76da2d30)) (pad "15" thru_hole oval (at 35.56 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 208 "unconnected-(DS1-Pad15)") (pinfunction "LED(+)") (pintype "power_in+no_connect") (tstamp ebaa10fd-c0ef-4d00-8909-6d4c6b676f63)) + (net 202 "unconnected-(DS1-Pad15)") (pinfunction "LED(+)") (pintype "power_in+no_connect") (tstamp ebaa10fd-c0ef-4d00-8909-6d4c6b676f63)) (pad "16" thru_hole oval (at 38.1 0) (size 1.8 2.6) (drill 1.2) (layers *.Cu *.Mask) - (net 209 "unconnected-(DS1-Pad16)") (pinfunction "LED(-)") (pintype "power_in+no_connect") (tstamp 3738d063-19ab-4a99-a9f3-f61e8af8ae45)) + (net 203 "unconnected-(DS1-Pad16)") (pinfunction "LED(-)") (pintype "power_in+no_connect") (tstamp 3738d063-19ab-4a99-a9f3-f61e8af8ae45)) (model "${KICAD6_3DMODEL_DIR}/Display.3dshapes/WC1602A.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -19279,49 +19194,6 @@ (net 2 "GND") (pinfunction "1") (pintype "input") (tstamp bdec116a-648d-45e0-bb89-db425267fb4e)) ) - (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") - (tedit 5F68FEEE) (tstamp c6e35195-f6c2-4750-91f4-b398c27082d7) - (at -81.026 83.82 180) - (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") - (tags "resistor handsolder") - (property "Need_order" "0") - (property "Sheetfile" "kicad-dart-70.kicad_sch") - (property "Sheetname" "") - (path "/f4d4a80d-f76c-459a-a213-e658702afada") - (attr smd) - (fp_text reference "R11" (at 0 -1.43) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 6bc60904-e9d6-41a2-b74a-5401b547e55e) - ) - (fp_text value "680" (at 0 1.43) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 44097fe5-c7c3-4785-95f0-93e53103e778) - ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 0.4 0.4) (thickness 0.06))) - (tstamp 96901fb9-3eea-4815-97ec-d5f972682afd) - ) - (fp_line (start -0.254724 0.5225) (end 0.254724 0.5225) (layer "F.SilkS") (width 0.12) (tstamp 126a4415-e091-4b4b-a46b-59c440d1a586)) - (fp_line (start -0.254724 -0.5225) (end 0.254724 -0.5225) (layer "F.SilkS") (width 0.12) (tstamp 3d92e396-8566-495e-8695-7c3504514634)) - (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer "F.CrtYd") (width 0.05) (tstamp 02e4dc40-6a3b-43ab-a359-ccda0f32506c)) - (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp 17d27cbd-5779-43db-8aa4-976a46981cf7)) - (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp 620d16eb-4d2b-4474-846f-388521c8f423)) - (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer "F.CrtYd") (width 0.05) (tstamp ce41a473-2d11-4c44-b79d-308cb73d294e)) - (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 074b0773-144c-4127-989c-7897b90e3439)) - (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 2577bc03-8888-4c46-9c30-e31673039eb1)) - (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 439bcaa5-a0ab-432e-b6c6-5c92a8788333)) - (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp c96f5582-56cb-4ede-a7b8-1ee75091aa7c)) - (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 35 "+VRX") (pintype "passive") (tstamp d4a2c822-4b73-43dd-a052-a8ee6425d3b3)) - (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 354 "Net-(D1-Pad1)") (pintype "passive") (tstamp fe9bc63f-ac05-47e4-a1ad-ccbf31d096a8)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - (footprint "mpb:C_Trimmer_Voltronics_JZ" (layer "F.Cu") (tedit 590DA842) (tstamp c8450843-958c-42e0-bf92-abb158cf82bc) (at 76.454 65.024) @@ -19459,7 +19331,7 @@ (footprint "Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp c9628094-85af-47c1-b157-8d4b331ee836) - (at 171.45 63.754 -90) + (at 171.958 59.182 -90) (descr "Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2BASR22J00L") @@ -19491,7 +19363,7 @@ (fp_line (start -1 0.6) (end -1 -0.6) (layer "F.Fab") (width 0.1) (tstamp edd596d8-b468-4a0d-8bb2-4d33480877e3)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer "F.Fab") (width 0.1) (tstamp fafa7054-0cb4-46e1-abfb-a49cea9eca10)) (pad "1" smd roundrect (at -1.025 0 270) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) - (net 284 "Net-(L25-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 2124339f-919f-4b9d-9eab-3fad5bf595a6)) + (net 275 "Net-(L25-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 2124339f-919f-4b9d-9eab-3fad5bf595a6)) (pad "2" smd roundrect (at 1.025 0 270) (size 1.15 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.217391) (net 107 "Net-(C100-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 53dc2c19-399c-4f43-a7b2-b37deacc429e)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0805_2012Metric.wrl" @@ -19580,7 +19452,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 13 "Net-(C14-Pad2)") (pintype "passive") (tstamp a53ae43a-b55e-44e8-8079-e2cf06307df9)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 254 "/CLK1") (pintype "passive") (tstamp b7f25dad-6741-463d-a63c-e9ef08888d66)) + (net 245 "/CLK1") (pintype "passive") (tstamp b7f25dad-6741-463d-a63c-e9ef08888d66)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -19590,7 +19462,7 @@ (footprint "LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF1) (tstamp c9e4a402-3d49-4101-be21-86066dcbd57d) - (at 146.23 211.121) + (at 161 117 -90) (descr "LED SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags "LED handsolder") (property "Need_order" "0") @@ -19598,15 +19470,15 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-00006088592c") (attr smd) - (fp_text reference "D20" (at 0 -1.82) (layer "F.SilkS") + (fp_text reference "D20" (at 0 -1.82 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 05c0c517-5786-471f-9745-a4174e2c3102) ) - (fp_text value "VG" (at 0 1.82) (layer "F.Fab") + (fp_text value "VG" (at 0 1.82 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp a6aea1c6-8472-4ee0-8db2-1f12b36d8e00) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.8 0.8) (thickness 0.12))) (tstamp 5573781f-48e6-4647-9612-c3279af4dee7) ) @@ -19622,10 +19494,10 @@ (fp_line (start 1.6 -0.8) (end -1.2 -0.8) (layer "F.Fab") (width 0.1) (tstamp 5041e0d6-6096-4bed-9d58-503117978f65)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer "F.Fab") (width 0.1) (tstamp 76ccd9be-f164-4588-9509-c50d717ebb9c)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer "F.Fab") (width 0.1) (tstamp b140c545-3d0d-4839-af99-e0d640d3ad1a)) - (pad "1" smd roundrect (at -1.4875 0) (size 1.425 1.75) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (pad "1" smd roundrect (at -1.4875 0 270) (size 1.425 1.75) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 2 "GND") (pinfunction "K") (pintype "passive") (tstamp 3b9b6d17-aa20-4ea8-ac3d-fd6d150078d1)) - (pad "2" smd roundrect (at 1.4875 0) (size 1.425 1.75) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 190 "Net-(D20-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 36f1aba1-5b39-483c-a038-67cae68cdfa1)) + (pad "2" smd roundrect (at 1.4875 0 270) (size 1.425 1.75) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 184 "Net-(D20-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 36f1aba1-5b39-483c-a038-67cae68cdfa1)) (model "${KICAD6_3DMODEL_DIR}/LED_SMD.3dshapes/LED_1206_3216Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -19677,43 +19549,9 @@ ) ) - (footprint "TestPoint:TestPoint_Pad_4.0x4.0mm" (layer "F.Cu") - (tedit 5A0F774F) (tstamp cc54e1ea-1baf-4d2f-a237-db9db65b8711) - (at 158.325 198.151) - (descr "SMD rectangular pad as test Point, square 4.0mm side length") - (tags "test point SMD pad rectangle square") - (property "Need_order" "0") - (property "Sheetfile" "pa_70.kicad_sch") - (property "Sheetname" "PA 70MHz") - (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-0000606f2119") - (attr exclude_from_pos_files) - (fp_text reference "J28" (at 0 -2.898) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 4f71934f-39d7-4b34-a207-6cae8a888ed5) - ) - (fp_text value "5V VG" (at 0 3.1) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 815e07e5-eb3c-4f07-8854-548255e7b1da) - ) - (fp_text user "${REFERENCE}" (at 0 -2.9) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 2e3d73d4-d4bc-40c0-8171-0fe0eb381cd7) - ) - (fp_line (start -2.2 -2.2) (end 2.2 -2.2) (layer "F.SilkS") (width 0.12) (tstamp 0e756604-9222-4039-b794-a5c3d8e631ab)) - (fp_line (start -2.2 2.2) (end -2.2 -2.2) (layer "F.SilkS") (width 0.12) (tstamp 1a6e6cb0-d54b-4740-84c7-96c5d5953d9f)) - (fp_line (start 2.2 2.2) (end -2.2 2.2) (layer "F.SilkS") (width 0.12) (tstamp 294c4daa-3de3-4a3f-8295-c2272cdad8bd)) - (fp_line (start 2.2 -2.2) (end 2.2 2.2) (layer "F.SilkS") (width 0.12) (tstamp d2a3650e-6bcf-4c4d-8643-8b04de2bbe4f)) - (fp_line (start 2.5 2.5) (end -2.5 2.5) (layer "F.CrtYd") (width 0.05) (tstamp 0c8430c4-40db-4e5e-9623-52fcf5c0cb3a)) - (fp_line (start 2.5 2.5) (end 2.5 -2.5) (layer "F.CrtYd") (width 0.05) (tstamp 804a93ce-3d33-4eb6-b90a-2cb94dc7741f)) - (fp_line (start -2.5 -2.5) (end -2.5 2.5) (layer "F.CrtYd") (width 0.05) (tstamp 8a8f8af4-49ed-49d6-a3d1-3d4166017ff0)) - (fp_line (start -2.5 -2.5) (end 2.5 -2.5) (layer "F.CrtYd") (width 0.05) (tstamp 9edb8949-3d0f-49a0-b5a8-80a4797b1982)) - (pad "1" smd rect (at 0 0) (size 4 4) (layers "F.Cu" "F.Mask") - (net 150 "/PA 70MHz/VG_5V") (pinfunction "Pin_1") (pintype "passive") (tstamp dbeaba93-ec94-4e70-8ff6-eaf7a9601008)) - ) - (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp cc77acc0-23dc-4531-8a78-6b2b56ec9f64) - (at 186.817 85.09) + (at 188.976 85.598) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -19746,7 +19584,7 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 115 "Net-(C109-Pad2)") (pintype "passive") (tstamp 4f77dd90-5d72-4f39-99fa-889b09393494)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 304 "Net-(Q23-Pad1)") (pintype "passive") (tstamp 988b3b15-af24-41bc-bf60-f96261e64290)) + (net 294 "Net-(Q23-Pad1)") (pintype "passive") (tstamp 988b3b15-af24-41bc-bf60-f96261e64290)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -19754,67 +19592,9 @@ ) ) - (footprint "mpb:BNC_Molex_73100-0105_Horizontal" (layer "F.Cu") - (tedit 60AFC043) (tstamp cdbc0c21-d29c-4b82-bf60-d3984356bb03) - (at 143.1815 91.44 -90) - (descr "BNC RF Interface, PCB mount 4 pin, Right Angle, Bayonet, 50Ohm, 4GHz, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1478035%7FB1%7Fpdf%7FEnglish%7FENG_CD_1478035_B1.pdf%7F1-1478035-0") - (tags "BNC RF interface bayonet 50ohm") - (property "Need_order" "") - (property "Sheetfile" "kicad-dart-70.kicad_sch") - (property "Sheetname" "") - (path "/d1e4882e-5e6c-4dfa-8dd5-534c12432f27") - (attr through_hole) - (fp_text reference "J21" (at 5.8 10.5) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 5bb5d795-2119-4478-aaad-5f76907e890e) - ) - (fp_text value "VHF" (at 0 15.3 90) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp fc7d2ec7-579f-444e-9a0d-84dff4120149) - ) - (fp_text user "${REFERENCE}" (at 0 5.5 90) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp fe298fb8-d286-4625-9673-d4a95d797ced) - ) - (fp_line (start -4.6 10.5) (end 4.6 10.5) (layer "F.SilkS") (width 0.12) (tstamp 8d5ad0bc-3956-4a9a-8ff6-def5206a8eda)) - (fp_line (start 4.6 10.5) (end 4.6 6.575) (layer "F.SilkS") (width 0.12) (tstamp d654f7ce-d1c8-4332-8ac5-335e1443ed29)) - (fp_line (start -4.6 10.5) (end -4.6 6.575) (layer "F.SilkS") (width 0.12) (tstamp e1c15cb7-b6ae-4335-b98c-0f4f19350609)) - (fp_line (start 2.825 0) (end -2.825 0) (layer "F.SilkS") (width 0.12) (tstamp f0b44528-6c62-4d9e-924e-1d59cbf90591)) - (fp_line (start -4.7 0) (end -4.7 2.3) (layer "F.SilkS") (width 0.12) (tstamp f64e03b4-ab2c-4701-bb1c-f0cd1afa85cb)) - (fp_line (start 4.6 0) (end 4.6 2.3) (layer "F.SilkS") (width 0.12) (tstamp f692068b-c5ed-441f-b5e9-40dee99c900f)) - (fp_line (start 0 0.2) (end 0.5 0.9) (layer "F.SilkS") (width 0.12) (tstamp f7a232b4-f2fc-46c1-ae4b-186ee2e04eb2)) - (fp_line (start 0 0.2) (end -0.5 0.9) (layer "F.SilkS") (width 0.12) (tstamp fa1111a7-d0d8-40d3-b535-2c0713f80c20)) - (fp_line (start 7.53 -11.9) (end 7.53 13.03) (layer "F.CrtYd") (width 0.05) (tstamp 4dabca9c-23df-465e-b7ca-6d23cec40b10)) - (fp_line (start 7.53 13.03) (end -7.53 13.03) (layer "F.CrtYd") (width 0.05) (tstamp 6c4c73ba-47dc-4cd9-a407-f7c23a02ee95)) - (fp_line (start -7.53 13.03) (end -7.53 -11.9) (layer "F.CrtYd") (width 0.05) (tstamp de9854fd-786e-444e-830f-6020bbf73a64)) - (fp_line (start -7.53 -11.9) (end 7.53 -11.9) (layer "F.CrtYd") (width 0.05) (tstamp e801df68-5fc2-4008-85a3-d849bfbe2de7)) - (fp_line (start -4.8 9.9) (end -4.8 0) (layer "F.Fab") (width 0.1) (tstamp 044f5ce9-bea0-4bb1-9d47-47ae99fd96a5)) - (fp_line (start 4.8 0) (end 4.8 9.9) (layer "F.Fab") (width 0.1) (tstamp 1c7e1742-6cec-43d6-8c8a-d690a4415cca)) - (fp_line (start 4.8 0) (end 4.8 -11.4) (layer "F.Fab") (width 0.1) (tstamp 23744949-7e8f-43e2-8313-f04d8776269e)) - (fp_line (start 4.8 9.9) (end -4.8 9.9) (layer "F.Fab") (width 0.1) (tstamp 4d06848a-064f-416e-882f-9fc4391d360a)) - (fp_line (start -0.8 9.9) (end -0.8 10.9) (layer "F.Fab") (width 0.1) (tstamp 5061eacb-a9d3-4f51-a8b3-8b1708308117)) - (fp_line (start 4.8 -11.4) (end -4.8 -11.4) (layer "F.Fab") (width 0.1) (tstamp 5eec8773-4047-46d9-b467-731bb8a38583)) - (fp_line (start 0.7 9.9) (end 0.7 10.9) (layer "F.Fab") (width 0.1) (tstamp 7afd7ad5-a371-4ddc-ae3b-1a793357cfa3)) - (fp_line (start -4.8 0) (end -4.8 -11.4) (layer "F.Fab") (width 0.1) (tstamp c94333ae-6ea6-4383-a715-122006c3185d)) - (fp_line (start 0.7 10.9) (end -0.8 10.9) (layer "F.Fab") (width 0.1) (tstamp db5f7ecd-044e-4fc0-95eb-ca0ee90884a2)) - (fp_line (start -4.8 0) (end 4.8 0) (layer "F.Fab") (width 0.1) (tstamp de179495-a80d-48b1-a81f-82bb52dd015f)) - (fp_circle (center 0 -7.2) (end 1 -7.2) (layer "F.Fab") (width 0.1) (fill none) (tstamp 06801b47-855b-4753-bbde-d9e1599b2059)) - (pad "1" thru_hole circle (at 0 12.4 270) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask) - (net 18 "Net-(C17-Pad1)") (pinfunction "In") (pintype "passive") (tstamp 81548632-d166-4df1-9858-c4eaa9bf88f1)) - (pad "2" thru_hole circle (at 3.8 4.6 270) (size 4 4) (drill 1.8) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "Ext") (pintype "passive") (tstamp 10a85c81-de7c-4c18-a061-7052fc1c5dd4)) - (pad "2" thru_hole circle (at -3.8 4.6 270) (size 4 4) (drill 1.8) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "Ext") (pintype "passive") (tstamp d9703acb-ac26-4c04-bd44-959180cbab24)) - (model "${KICAD6_3DMODEL_DIR}/Connector_Coaxial.3dshapes/BNC_TEConnectivity_1478035_Horizontal.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp cdd3556c-cd52-4a66-b574-b0ba5f43bb8d) - (at 151.335 215.601) + (at 134.112 65.024 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -19823,15 +19603,15 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/3f585906-a2c2-4d8b-8140-3f6dc6780a12") (attr smd) - (fp_text reference "C160" (at 0 -1.43) (layer "F.SilkS") + (fp_text reference "C160" (at 0 -1.43 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp d2b627eb-f120-41d4-8635-0a7c60298c4c) ) - (fp_text value "47pF" (at 0 1.43) (layer "F.Fab") + (fp_text value "47pF" (at 0 1.43 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 2094b34f-f945-4409-816b-0acbbcecd601) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 05038898-ff94-4aab-8aa0-21ded1ba9144) ) @@ -19845,10 +19625,10 @@ (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 2e909067-9306-404d-9711-ac60418fa9b4)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp e14a5584-78c4-45e6-9ea3-2200df22bb41)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp eac0f540-e589-4718-8cc8-8c85e40ddf2b)) - (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp c1eefbcb-2926-433b-af7c-816e9ba5adb1)) - (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 153 "Net-(C159-Pad2)") (pintype "passive") (tstamp fbb94c94-321c-4936-885c-4d73849752b0)) + (pad "2" smd roundrect (at 0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 150 "Net-(C159-Pad2)") (pintype "passive") (tstamp fbb94c94-321c-4936-885c-4d73849752b0)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -19858,7 +19638,7 @@ (footprint "Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical" (layer "F.Cu") (tedit 59FED5CC) (tstamp ce44b085-c7f1-473d-9b77-97579c792364) - (at 114.912 53.65) + (at 108.458 53.65) (descr "Through hole straight pin header, 1x06, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x06 2.54mm single row") (property "MPN" "SSW-106-01-G-S") @@ -19896,15 +19676,15 @@ (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_1") (pintype "passive") (tstamp 7ab16189-0445-4bae-8ea1-8a4342368a9f)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 251 "/Baseband/VHF_OUT") (pinfunction "Pin_2") (pintype "passive") (tstamp 89419f89-c070-46d3-a0ea-017cce85d5e0)) + (net 244 "/Baseband/VHF_OUT") (pinfunction "Pin_2") (pintype "passive") (tstamp 89419f89-c070-46d3-a0ea-017cce85d5e0)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_3") (pintype "passive") (tstamp d1140efc-1e72-4096-8a81-f7ec4b563838)) (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 355 "Net-(J16-Pad5)") (pinfunction "Pin_4") (pintype "passive") (tstamp 280902fc-49e4-4d57-9848-18fcb2ba3179)) + (net 358 "/TX_to_PA") (pinfunction "Pin_4") (pintype "passive") (tstamp 280902fc-49e4-4d57-9848-18fcb2ba3179)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "Pin_5") (pintype "passive") (tstamp 4173268f-0a77-4e75-885b-5735ea22660f)) (pad "6" thru_hole oval (at 0 12.7) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 256 "+VTX") (pinfunction "Pin_6") (pintype "passive") (tstamp db3e8303-62ee-45a2-ae34-d7578143e325)) + (net 247 "+VTX") (pinfunction "Pin_6") (pintype "passive") (tstamp db3e8303-62ee-45a2-ae34-d7578143e325)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x06_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -19953,7 +19733,7 @@ (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 57 "Net-(C49-Pad2)") (pinfunction "E") (pintype "passive") (tstamp cc1e256b-a21f-4eb2-93db-9e14ed9c8be4)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 293 "Net-(Q10-Pad1)") (pinfunction "C") (pintype "passive") (tstamp 36abcd9e-5ed2-4e4a-b5ec-d70a24ee5d21)) + (net 283 "Net-(Q10-Pad1)") (pinfunction "C") (pintype "passive") (tstamp 36abcd9e-5ed2-4e4a-b5ec-d70a24ee5d21)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -19994,9 +19774,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp caf2d119-5bcc-43d4-97a5-f803352f4fff)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp ed7da274-48a4-4c6d-9b22-81977ccf5148)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 287 "Net-(Q1-Pad1)") (pintype "passive") (tstamp d026388b-ab8f-4774-9872-cd15762b5485)) + (net 278 "Net-(Q1-Pad1)") (pintype "passive") (tstamp d026388b-ab8f-4774-9872-cd15762b5485)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 224 "Net-(J7-Pad1)") (pintype "passive") (tstamp fb0dc1f8-ec7a-4c64-a430-f554e2732b1f)) + (net 217 "Net-(J7-Pad1)") (pintype "passive") (tstamp fb0dc1f8-ec7a-4c64-a430-f554e2732b1f)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -20006,7 +19786,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp cf33f7dd-be8d-483e-98fd-3bb65487cb44) - (at 148.185 225.811) + (at 155.448 140.462) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -20037,9 +19817,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 72129c4a-2c24-4139-9a1d-1fa8aa973f1d)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp f6cead28-ef76-4cda-a70e-8914637c59d4)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 325 "Net-(R159-Pad1)") (pintype "passive") (tstamp 7b55f2cb-7755-4888-b18f-eb23718986a4)) + (net 314 "Net-(R159-Pad1)") (pintype "passive") (tstamp 7b55f2cb-7755-4888-b18f-eb23718986a4)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 143 "VGG2") (pintype "passive") (tstamp de91fb14-7add-49ce-8650-79a062cdca8a)) + (net 134 "VGG1") (pintype "passive") (tstamp de91fb14-7add-49ce-8650-79a062cdca8a)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -20129,10 +19909,10 @@ (fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp cd580f82-a666-48ed-a4c5-9ad26f998a1a)) (fp_line (start -0.7 1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp eaefa94a-d30e-4afb-802d-5e8e52b9cce3)) (pad "1" smd rect (at -1.5 -0.95) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 174 "Net-(D9-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 13bfa8ad-2c59-417e-9ebe-e7e176a61fa6)) + (net 168 "Net-(D9-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 13bfa8ad-2c59-417e-9ebe-e7e176a61fa6)) (pad "2" smd rect (at -1.5 0.95) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp 55aae3f0-e310-48ed-ab75-b3198e060dcc)) (pad "3" smd rect (at 1.5 0) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 175 "Net-(D10-Pad3)") (pinfunction "K") (pintype "passive") (tstamp 722e8d5a-6ce6-4839-970f-8089b53ed559)) + (net 169 "Net-(D10-Pad3)") (pinfunction "K") (pintype "passive") (tstamp 722e8d5a-6ce6-4839-970f-8089b53ed559)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -20142,7 +19922,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") (tedit 5F68FEEE) (tstamp cfbff6c0-2f7d-483a-b467-559d8cf4486b) - (at 137.095 229.891) + (at 128.524 142.269) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor") (property "MPN" "") @@ -20176,7 +19956,7 @@ (pad "1" smd roundrect (at -0.95 0) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 8ed25032-2e06-42cd-b0fa-aa76f8620571)) (pad "2" smd roundrect (at 0.95 0) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 143 "VGG2") (pintype "passive") (tstamp e0aebacc-40fb-4311-9a3c-056a24edc5b7)) + (net 141 "VGG2") (pintype "passive") (tstamp e0aebacc-40fb-4311-9a3c-056a24edc5b7)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -20255,7 +20035,7 @@ (pad "1" smd rect (at -1.4 0 90) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "K") (pintype "passive") (tstamp 98275645-ad3c-4c2c-a860-bcab133bfd44)) (pad "2" smd rect (at 1.4 0 90) (size 1.1 1.1) (layers "F.Cu" "F.Paste" "F.Mask") - (net 179 "Net-(D13-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 63a6795d-1df2-4c6d-8e58-4eae41fb8234)) + (net 173 "Net-(D13-Pad2)") (pinfunction "A") (pintype "passive") (tstamp 63a6795d-1df2-4c6d-8e58-4eae41fb8234)) (model "${KICAD6_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-123F.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -20296,7 +20076,7 @@ (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp d9adf6ea-12f6-4945-97e4-3e40b0c7ac58)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp dafb9160-b3bf-4461-a3c1-ea836f74e580)) (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 294 "Net-(Q10-Pad2)") (pintype "passive") (tstamp c6c40e29-92de-4fb4-a741-bb07be8bd9ae)) + (net 284 "Net-(Q10-Pad2)") (pintype "passive") (tstamp c6c40e29-92de-4fb4-a741-bb07be8bd9ae)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 08685ed8-52c1-4b61-b8a9-b6cef595e729)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -20480,6 +20260,49 @@ ) ) + (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEEE) (tstamp d632e66a-9b5e-4d8e-93c7-96d7d3ee2813) + (at 106.172 78.232 180) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor handsolder") + (property "Need_order" "0") + (property "Sheetfile" "ant_switch.kicad_sch") + (property "Sheetname" "Antenna Switch") + (path "/2eb25ee2-d512-42fe-80f1-00400ed0a45e/2fb49f66-f350-41d2-806c-c8967fffe274") + (attr smd) + (fp_text reference "R130" (at 0 -1.43) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 78ecf24b-5251-4531-bf07-1f423522c4a9) + ) + (fp_text value "1k" (at 0 1.43) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp af57f4bf-a0ab-4cdf-b695-5c66a9cc94f4) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.4 0.4) (thickness 0.06))) + (tstamp f5652dcc-2f56-4505-acc3-80a571c41fc7) + ) + (fp_line (start -0.254724 -0.5225) (end 0.254724 -0.5225) (layer "F.SilkS") (width 0.12) (tstamp 07db23cb-1a45-4513-8b62-c62c19191697)) + (fp_line (start -0.254724 0.5225) (end 0.254724 0.5225) (layer "F.SilkS") (width 0.12) (tstamp 8a91eb23-5d91-43c4-b022-abced1d803d1)) + (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp a4e29146-d194-424b-b6c1-00c1a54ed57e)) + (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer "F.CrtYd") (width 0.05) (tstamp ad82584f-e11a-4b01-9937-a7be39db9c83)) + (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp af4433d0-dc8a-49fe-bdcc-785b3c22b6c3)) + (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer "F.CrtYd") (width 0.05) (tstamp be5aaba2-2e4e-4006-b09b-47878edf26eb)) + (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 5b5fb08b-f74b-4c9f-840b-ecd961cd983c)) + (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 7b43350d-d5b3-4511-9126-7c7381afbd05)) + (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 9452a3e9-19af-44c1-86b0-938681dec17d)) + (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp b76a3d5d-f644-4e19-b88d-0ee5dd03db7f)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 355 "/Antenna Switch/V_{PIN}") (pintype "passive") (tstamp 34f352df-8f53-45fd-9834-56417aaf8c77)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 357 "Net-(Q26-Pad7)") (pintype "passive") (tstamp 76f69c03-b180-4ab3-acb9-5d44fdb8050f)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp d7813f22-538e-4efa-b0b5-f2922fde2eb5) (at 34.036 58.166 90) @@ -20524,6 +20347,65 @@ ) ) + (footprint "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" (layer "F.Cu") + (tedit 5D9F72B1) (tstamp d789ea5e-4f0e-4e15-931b-71fe46ead546) + (at 107.95 82.804 90) + (descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") + (tags "SOIC SO") + (property "MPN" "IRF7309TRPBF") + (property "Need_order" "0") + (property "Sheetfile" "ant_switch.kicad_sch") + (property "Sheetname" "Antenna Switch") + (path "/2eb25ee2-d512-42fe-80f1-00400ed0a45e/623ec9aa-65d9-4a8d-8578-f5fbf5770ed4") + (attr smd) + (fp_text reference "Q26" (at 0 -3.4 90) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 20ed43ae-d5d4-427f-aca2-98e71b24219a) + ) + (fp_text value "IRF7309" (at 0 3.4 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 7fdd87af-dfb2-4bb8-8104-fffe3b6427c0) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.98 0.98) (thickness 0.15))) + (tstamp 69758c64-39cf-41be-b934-04436e7fb0cc) + ) + (fp_line (start 0 2.56) (end 1.95 2.56) (layer "F.SilkS") (width 0.12) (tstamp 42b92f1d-dc63-4dfd-b9dc-0c16cebd0e8b)) + (fp_line (start 0 -2.56) (end -3.45 -2.56) (layer "F.SilkS") (width 0.12) (tstamp 5e0288e4-33bb-4819-9715-c4d466443bb5)) + (fp_line (start 0 -2.56) (end 1.95 -2.56) (layer "F.SilkS") (width 0.12) (tstamp 6f42a2a3-00ff-49d1-9c65-832192621bbe)) + (fp_line (start 0 2.56) (end -1.95 2.56) (layer "F.SilkS") (width 0.12) (tstamp b35954de-bcca-4f24-973e-aa0e6c0ec55e)) + (fp_line (start -3.7 2.7) (end 3.7 2.7) (layer "F.CrtYd") (width 0.05) (tstamp 6ca16d48-6d42-428b-8769-bca85da2b25c)) + (fp_line (start 3.7 2.7) (end 3.7 -2.7) (layer "F.CrtYd") (width 0.05) (tstamp 73f52cff-f711-40ee-93f2-604f7882b20c)) + (fp_line (start -3.7 -2.7) (end -3.7 2.7) (layer "F.CrtYd") (width 0.05) (tstamp 765f6362-2e31-4c25-a22c-6e9e5eeba4c5)) + (fp_line (start 3.7 -2.7) (end -3.7 -2.7) (layer "F.CrtYd") (width 0.05) (tstamp 9fae03e2-a66f-4bfc-bcfc-af03409ee01a)) + (fp_line (start 1.95 2.45) (end -1.95 2.45) (layer "F.Fab") (width 0.1) (tstamp 0b9090e8-f023-4a73-8ff8-0c0655134ecb)) + (fp_line (start 1.95 -2.45) (end 1.95 2.45) (layer "F.Fab") (width 0.1) (tstamp 4b3aa985-e4b3-4c3c-a36a-10cd86578d51)) + (fp_line (start -1.95 -1.475) (end -0.975 -2.45) (layer "F.Fab") (width 0.1) (tstamp 4bd99b8e-ecb9-4568-8931-01c8e8354d59)) + (fp_line (start -1.95 2.45) (end -1.95 -1.475) (layer "F.Fab") (width 0.1) (tstamp 61c176b4-9d47-4870-85e3-38a104c8a38c)) + (fp_line (start -0.975 -2.45) (end 1.95 -2.45) (layer "F.Fab") (width 0.1) (tstamp bcb75020-1963-4a78-a620-7f1f81d41f05)) + (pad "1" smd roundrect (at -2.475 -1.905 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 2 "GND") (pinfunction "S") (pintype "passive") (tstamp 8bd04b86-60a4-416f-bd33-cd0453d1a8a7)) + (pad "2" smd roundrect (at -2.475 -0.635 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 247 "+VTX") (pinfunction "G") (pintype "input") (tstamp 7232aa24-3982-4c8f-b0cf-fb5be1542c31)) + (pad "3" smd roundrect (at -2.475 0.635 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 5 "+9VA") (pinfunction "1") (pintype "passive") (tstamp 3be21c43-694e-4b2d-9c60-0c4412aa640a)) + (pad "4" smd roundrect (at -2.475 1.905 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 247 "+VTX") (pinfunction "G") (pintype "input") (tstamp 2a674a3c-669b-4283-b471-24204aa85f18)) + (pad "5" smd roundrect (at 2.475 1.905 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 356 "Net-(Q26-Pad5)") (pinfunction "D") (pintype "passive") (tstamp 5fcbeb53-0b57-4e15-9a3a-3a4e43f8c49a)) + (pad "6" smd roundrect (at 2.475 0.635 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 356 "Net-(Q26-Pad5)") (pinfunction "D") (pintype "passive") (tstamp e0b2abf7-e66b-4098-a13f-d2177a053eb3)) + (pad "7" smd roundrect (at 2.475 -0.635 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 357 "Net-(Q26-Pad7)") (pinfunction "D") (pintype "passive") (tstamp 3352afde-6c6d-4a85-8476-79b8505858d1)) + (pad "8" smd roundrect (at 2.475 -1.905 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 357 "Net-(Q26-Pad7)") (pinfunction "D") (pintype "passive") (tstamp f86d7252-6185-4cab-aad0-77e57cd3f7f5)) + (model "${KICAD6_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Package_TO_SOT_SMD:SOT-23" (layer "F.Cu") (tedit 5FA16958) (tstamp d7a947fe-34ce-440c-926d-4928323ddd2a) (at 68.834 79.248) @@ -20561,7 +20443,7 @@ (fp_line (start 0.65 -1.45) (end 0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp 9cd445d1-fedb-437d-ae2c-d5463ef3a9fc)) (fp_line (start -0.65 1.45) (end -0.65 -1.125) (layer "F.Fab") (width 0.1) (tstamp ec3a4d63-595d-41ad-be93-bbae3098b8b6)) (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 298 "Net-(Q14-Pad2)") (pinfunction "D") (pintype "passive") (tstamp c931ac70-c474-489f-bddd-2b63edc05112)) + (net 288 "Net-(Q14-Pad2)") (pinfunction "D") (pintype "passive") (tstamp c931ac70-c474-489f-bddd-2b63edc05112)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 70 "Net-(C60-Pad2)") (pinfunction "S") (pintype "passive") (tstamp f4e2be80-e322-4344-ba6d-26c27b4b5ee9)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) @@ -20575,7 +20457,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp d92cd163-71f7-4c7c-896a-f619cb507d82) - (at 151.725 198.701) + (at 143.51 153.67 -90) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -20583,27 +20465,27 @@ (property "Sheetname" "PA 70MHz") (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-000060567bad") (attr exclude_from_pos_files) - (fp_text reference "H22" (at 0 -3.8) (layer "F.SilkS") + (fp_text reference "H22" (at 0 -3.8 90) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp c5cd02be-db49-4b84-9ed9-9f84db4c16f2) ) - (fp_text value "M3" (at 0 3.8) (layer "F.Fab") + (fp_text value "M3" (at 0 3.8 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 72008a32-ac2c-4235-80fc-759b5f9bf168) ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp fc9d9c3b-fa0b-4063-b87d-9d9996ad3984) ) (fp_circle (center 0 0) (end 2.8 0) (layer "Cmts.User") (width 0.15) (fill none) (tstamp 4bb6d020-e8fb-403c-8b39-a4dc6c4ff8c9)) (fp_circle (center 0 0) (end 3.05 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp 738ae1a0-1607-4e52-aa9c-809881bdbd5e)) - (pad "1" thru_hole circle (at 0 0) (size 5.6 5.6) (drill 3.2) (layers *.Cu *.Mask) + (pad "1" thru_hole circle (at 0 0 270) (size 5.6 5.6) (drill 3.2) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "1") (pintype "input") (tstamp 4c407471-d6b5-490d-a40e-5776ee9e2136)) ) (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp d92ee29d-9d63-4775-a3c4-141953680fd5) - (at 180.086 29.21 -90) + (at 164.846 33.528) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -20612,15 +20494,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/1cc91e6f-9a1d-4b6c-a118-334af2828f70") (attr smd) - (fp_text reference "C127" (at 0 -1.43 90) (layer "F.SilkS") + (fp_text reference "C127" (at 0 -1.43) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp dc06e118-9879-48b3-9f69-70b0ca899a5d) ) - (fp_text value "27pF" (at 0 1.43 90) (layer "F.Fab") + (fp_text value "27pF" (at 0 1.43) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 87362a6e-4b0c-47c6-bbe1-838bf1e85517) ) - (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp a7471922-20e1-4c9f-a6ae-32a0da97c627) ) @@ -20634,9 +20516,9 @@ (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 37a4c33a-77c0-4c33-b2b8-2f95597be9fd)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 3dfc0633-ffe2-4850-8227-07342fb5b94a)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp c4779eed-a920-4975-ac7f-7bcc044ebd6b)) - (pad "1" smd roundrect (at -0.8625 0 270) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp aa334cc8-c023-460c-b4e0-bc319b49d30c)) - (pad "2" smd roundrect (at 0.8625 0 270) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "2" smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 127 "Net-(C126-Pad1)") (pintype "passive") (tstamp 16066100-760f-4a0e-8f4a-d6dd7a5dbd46)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) @@ -20726,10 +20608,10 @@ (fp_line (start -0.7 -0.95) (end -0.7 1.5) (layer "F.Fab") (width 0.1) (tstamp 962e61a3-6890-4739-a1cc-48d905a462d0)) (fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer "F.Fab") (width 0.1) (tstamp ca19f80d-6c55-4ac0-9e78-e63a183becd2)) (pad "1" smd rect (at -1.5 -0.95 180) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 177 "Net-(D11-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 33139bee-799b-47e7-9a95-62f8ef27119b)) + (net 171 "Net-(D11-Pad1)") (pinfunction "A") (pintype "passive") (tstamp 33139bee-799b-47e7-9a95-62f8ef27119b)) (pad "2" smd rect (at -1.5 0.95 180) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp e180ea0a-315c-4c8b-938f-1f22b8eee6d5)) (pad "3" smd rect (at 1.5 0 180) (size 1.9 0.8) (layers "F.Cu" "F.Paste" "F.Mask") - (net 178 "Net-(D11-Pad3)") (pinfunction "K") (pintype "passive") (tstamp 9682350d-6ae6-4cf6-91d1-c9a2655f1b4a)) + (net 172 "Net-(D11-Pad3)") (pinfunction "K") (pintype "passive") (tstamp 9682350d-6ae6-4cf6-91d1-c9a2655f1b4a)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -20771,7 +20653,7 @@ (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 9289ffb3-a0c0-4c9f-8468-599223b6ff09)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp ff00a4be-ba2c-4e50-aae7-379455158d31)) (pad "1" smd roundrect (at -0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 5da08279-025f-4f7c-ac51-dcd0828c02ec)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 5da08279-025f-4f7c-ac51-dcd0828c02ec)) (pad "2" smd roundrect (at 0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 6322cec1-76f8-408c-bfa4-d4c3596413bd)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" @@ -20783,7 +20665,7 @@ (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") (tedit 56D1B4CB) (tstamp db70cb7d-ea1b-4780-8956-ffa1d166b0f7) - (at 114.912 48.768) + (at 108.458 48.768) (descr "Mounting Hole 3.2mm, M3, DIN965") (tags "mounting hole 3.2mm m3 din965") (property "Need_order" "0") @@ -20811,7 +20693,7 @@ (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp db8a4736-0ebf-4224-ab61-30319cb20415) - (at 109.728 33.528 -90) + (at 112.522 32.766 -90) (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2UAS1R0x0CL") @@ -20843,9 +20725,9 @@ (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp ed400c5d-6005-4531-983c-321bd77b60e0)) (fp_line (start 1.25 -1) (end 1.25 1) (layer "F.Fab") (width 0.1) (tstamp f39b5316-6206-424a-8a83-85f7151c1292)) (pad "1" smd roundrect (at -1.1625 0 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 280 "Net-(L15-Pad1)") (pinfunction "1") (pintype "passive") (tstamp dfb534ed-86f9-4bda-8d11-d984649471f6)) + (net 271 "Net-(L15-Pad1)") (pinfunction "1") (pintype "passive") (tstamp dfb534ed-86f9-4bda-8d11-d984649471f6)) (pad "2" smd roundrect (at 1.1625 0 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 279 "Net-(L14-Pad1)") (pinfunction "2") (pintype "passive") (tstamp d6f44257-ea0a-4350-888a-95e98379ad3d)) + (net 270 "Net-(L14-Pad1)") (pinfunction "2") (pintype "passive") (tstamp d6f44257-ea0a-4350-888a-95e98379ad3d)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -20897,6 +20779,34 @@ ) ) + (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") + (tedit 56D1B4CB) (tstamp dd643f83-b4ca-4e57-8d8a-b94b091bd559) + (at 139.7 50.815) + (descr "Mounting Hole 3.2mm, M3, DIN965") + (tags "mounting hole 3.2mm m3 din965") + (property "Need_order" "0") + (property "Sheetfile" "pa_70.kicad_sch") + (property "Sheetname" "PA 70MHz") + (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/0e58cefc-93b3-4680-a26e-2bf027621c82") + (attr exclude_from_pos_files) + (fp_text reference "H36" (at 0 -3.8) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp ca70a2b9-1467-4c46-b0df-f9f2b2b35aae) + ) + (fp_text value "M3" (at 0 3.8) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 973eb523-4599-4c79-8de9-e0496fc918cd) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp e0632021-864d-4c88-a856-bce44380857e) + ) + (fp_circle (center 0 0) (end 2.8 0) (layer "Cmts.User") (width 0.15) (fill none) (tstamp 31c65310-cb48-4e2c-94c4-71c3f1e4ca1f)) + (fp_circle (center 0 0) (end 3.05 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp ce23c7e0-8ed8-4395-b34c-8b0335d90763)) + (pad "1" thru_hole circle (at 0 0) (size 5.6 5.6) (drill 3.2) (layers *.Cu *.Mask) + (net 2 "GND") (pinfunction "1") (pintype "input") (tstamp b32b7184-151f-465f-9ace-68fd9039dedf)) + ) + (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp df285c2f-4e68-4a24-a1eb-b600ba912a19) (at 235.839 68.707 -90) @@ -20966,7 +20876,7 @@ (fp_circle (center 0 0) (end 0 0.95) (layer "F.SilkS") (width 0.12) (fill none) (tstamp 36179c44-2be7-4dc8-bbc0-18a084f800c7)) (fp_circle (center 0 0) (end 1.25 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp 52adeb2a-563f-4df0-8fc5-953edbb4bf46)) (pad "1" smd circle (at 0 0) (size 1.5 1.5) (layers "F.Cu" "F.Mask") - (net 159 "/Control on separate board/3.3V_UI") (pinfunction "1") (pintype "passive") (tstamp 71fda131-a62e-4934-bc08-bcc0b70d089e)) + (net 153 "/Control on separate board/3.3V_UI") (pinfunction "1") (pintype "passive") (tstamp 71fda131-a62e-4934-bc08-bcc0b70d089e)) ) (footprint "Package_TO_SOT_SMD:SOT-143" (layer "F.Cu") @@ -21010,7 +20920,7 @@ (pad "3" smd rect (at 1 0.95 90) (size 0.7 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (net 120 "Net-(C114-Pad2)") (pinfunction "G1") (pintype "passive") (tstamp 061a068e-ab20-400c-af81-61d9d1f8cccb)) (pad "4" smd rect (at 1 -0.95 90) (size 0.7 0.6) (layers "F.Cu" "F.Paste" "F.Mask") - (net 305 "Net-(Q24-Pad4)") (pinfunction "G2") (pintype "passive") (tstamp 0c027ee8-b12e-4b56-b67c-b3268b854e3e)) + (net 295 "Net-(Q24-Pad4)") (pinfunction "G2") (pintype "passive") (tstamp 0c027ee8-b12e-4b56-b67c-b3268b854e3e)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-143.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -21018,9 +20928,96 @@ ) ) + (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEEE) (tstamp e072ffec-bae0-4d6a-85e7-b05f6f02e8e0) + (at 109.728 78.232) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor handsolder") + (property "Need_order" "0") + (property "Sheetfile" "ant_switch.kicad_sch") + (property "Sheetname" "Antenna Switch") + (path "/2eb25ee2-d512-42fe-80f1-00400ed0a45e/f9e7540b-2ab5-4277-b326-412bdfa7c893") + (attr smd) + (fp_text reference "R12" (at 0 -1.43) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 4fb0b1ab-3b73-41d0-8a82-f7b5ec72e7bd) + ) + (fp_text value "1k" (at 0 1.43) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 71d06790-89a3-4609-ba6c-867a2dfe0604) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.4 0.4) (thickness 0.06))) + (tstamp fd34ee4a-7b18-4f52-9276-54cc1bc18bb2) + ) + (fp_line (start -0.254724 -0.5225) (end 0.254724 -0.5225) (layer "F.SilkS") (width 0.12) (tstamp b13f907f-f030-4f62-a89a-4eb5ebdc180c)) + (fp_line (start -0.254724 0.5225) (end 0.254724 0.5225) (layer "F.SilkS") (width 0.12) (tstamp d44f4628-5826-49ca-bb54-68eaf156bada)) + (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer "F.CrtYd") (width 0.05) (tstamp 36f924de-606e-4de4-aefd-0979e8ef1f17)) + (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp 70b6e04d-3332-4b35-b525-b0c7523c985c)) + (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer "F.CrtYd") (width 0.05) (tstamp 9813264b-07d2-4e99-92be-262f8adb3f64)) + (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp da95e40f-ce45-4089-8240-16a74f3a74ac)) + (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp c9a9d86d-b266-49b5-abdb-232dc9395e05)) + (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp cb5fbcdd-3b6e-4866-a1fa-cfc5515a9c7c)) + (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp e720f179-11d3-4b95-9a57-f72d51138079)) + (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp ed6b4943-4ce6-470c-baba-7e348b3be501)) + (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 355 "/Antenna Switch/V_{PIN}") (pintype "passive") (tstamp 2e1ae3f4-ef41-4536-846f-0f66965d9c0b)) + (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 356 "Net-(Q26-Pad5)") (pintype "passive") (tstamp adbfd5f6-9882-4da7-867f-cd3b14cc23ac)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEEF) (tstamp e0ccdf7e-6d17-47e0-8bee-432e239bf4eb) + (at 110.236 90.165 180) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor handsolder") + (property "MPN" "VJ0805A103KXJTBC") + (property "Need_order" "0") + (property "Sheetfile" "ant_switch.kicad_sch") + (property "Sheetname" "Antenna Switch") + (path "/2eb25ee2-d512-42fe-80f1-00400ed0a45e/2ba41983-4c04-4158-a117-d251215480e8") + (attr smd) + (fp_text reference "C17" (at 0 -1.68) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp ce889480-7673-4670-978f-f8ce406f3733) + ) + (fp_text value "10nF" (at 0 1.68) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp bdac7228-4a2e-474c-a874-3f89992daa5c) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 5984206d-f453-4bbe-93bb-b2b5431bc745) + ) + (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer "F.SilkS") (width 0.12) (tstamp 173f81a8-658a-48ca-a769-6355e0264165)) + (fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer "F.SilkS") (width 0.12) (tstamp d83c0e59-dfdc-41cf-a94c-0d5e6d7f43c9)) + (fp_line (start 1.88 0.98) (end -1.88 0.98) (layer "F.CrtYd") (width 0.05) (tstamp 626082d8-1498-42d4-bf3c-5f270583b3fb)) + (fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer "F.CrtYd") (width 0.05) (tstamp 79da5a0c-d474-45ae-9856-8f393860bd3b)) + (fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer "F.CrtYd") (width 0.05) (tstamp 8a1dd3fd-6f11-4aa6-be6a-ccf46cff2c0f)) + (fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer "F.CrtYd") (width 0.05) (tstamp a226729a-7881-4f80-b251-255793539b97)) + (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 1285d7aa-3ee9-4a3e-bfb1-2640d51da3d5)) + (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 638f71fa-1415-4fba-a8d4-2e480566cd9b)) + (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp b216bb88-3e2f-4a2b-8a51-96fd3a581982)) + (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp c9172d8a-9c48-4382-931f-796a70038d8a)) + (pad "1" smd roundrect (at -1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 18 "Net-(C17-Pad1)") (pintype "passive") (tstamp 257c0099-8b12-4020-8bce-3c67699352a5)) + (pad "2" smd roundrect (at 1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 343 "/Antenna Switch/RX") (pintype "passive") (tstamp a50efbce-f8e8-4af0-814c-58b6b5be17e0)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Transformer_SMD:Transformer_Ethernet_Bourns_PT61017PEL" (layer "F.Cu") (tedit 5C422741) (tstamp e1f0ee6f-c65d-41b7-9340-8e93fdf16ce7) - (at 89.408 31.75 180) + (at 92.964 30.4585) (descr "https://www.bourns.com/docs/Product-Datasheets/PT61017PEL.pdf") (tags "Transformer Ethernet Single Center-Tap") (property "Description" "Alternatively, 10t tri on 5943004901") @@ -21066,33 +21063,33 @@ (fp_line (start 3.45 6.4) (end 3.45 -6.4) (layer "F.Fab") (width 0.1) (tstamp 5a71e5fd-af88-4627-8abd-c04171443974)) (fp_line (start -2.45 -6.4) (end -3.45 -5.4) (layer "F.Fab") (width 0.1) (tstamp 734655ad-ce66-43bd-bf31-554afc358975)) (fp_line (start -3.45 6.4) (end 3.45 6.4) (layer "F.Fab") (width 0.1) (tstamp 94d15c07-384c-46a7-ac0f-c1088275593b)) - (pad "1" smd rect (at -4.4 -4.445 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 189 "Net-(D19-Pad3)") (pinfunction "TD+") (pintype "passive") (tstamp 83911ba0-ea29-423b-a933-02392b2f9e6f)) - (pad "2" smd rect (at -4.4 -3.175 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") + (pad "1" smd rect (at -4.4 -4.445) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") + (net 183 "Net-(D19-Pad3)") (pinfunction "TD+") (pintype "passive") (tstamp 83911ba0-ea29-423b-a933-02392b2f9e6f)) + (pad "2" smd rect (at -4.4 -3.175) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "C_TD") (pintype "passive") (tstamp cd20f501-6474-4c82-a662-35b104fa1232)) - (pad "3" smd rect (at -4.4 -1.905 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 188 "Net-(D18-Pad3)") (pinfunction "TD-") (pintype "passive") (tstamp 0b699531-3a2a-44de-9b61-667b49b63294)) - (pad "4" smd rect (at -4.4 -0.635 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp 4a256df0-8b88-4155-bdf2-b93d6dd6d4b5)) - (pad "5" smd rect (at -4.4 0.635 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp c632cd8e-0129-4a8e-912f-2083f6d9df94)) - (pad "6" smd rect (at -4.4 1.905 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 186 "Net-(D18-Pad1)") (pinfunction "RD+") (pintype "passive") (tstamp c27eff46-8fe9-4f57-aff9-b9adff1d05f0)) - (pad "7" smd rect (at -4.4 3.175 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 315 "Net-(R93-Pad1)") (pinfunction "C_RD") (pintype "passive") (tstamp b4b3a9d3-b546-446d-8e29-8fb887208222)) - (pad "8" smd rect (at -4.4 4.445 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 187 "Net-(D18-Pad2)") (pinfunction "RD-") (pintype "passive") (tstamp 9a9743ff-4bc0-48d3-8f4c-cae442c5a846)) - (pad "9" smd rect (at 4.4 4.445 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") + (pad "3" smd rect (at -4.4 -1.905) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") + (net 182 "Net-(D18-Pad3)") (pinfunction "TD-") (pintype "passive") (tstamp 0b699531-3a2a-44de-9b61-667b49b63294)) + (pad "4" smd rect (at -4.4 -0.635) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp 4a256df0-8b88-4155-bdf2-b93d6dd6d4b5)) + (pad "5" smd rect (at -4.4 0.635) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp c632cd8e-0129-4a8e-912f-2083f6d9df94)) + (pad "6" smd rect (at -4.4 1.905) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") + (net 180 "Net-(D18-Pad1)") (pinfunction "RD+") (pintype "passive") (tstamp c27eff46-8fe9-4f57-aff9-b9adff1d05f0)) + (pad "7" smd rect (at -4.4 3.175) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") + (net 305 "Net-(R93-Pad1)") (pinfunction "C_RD") (pintype "passive") (tstamp b4b3a9d3-b546-446d-8e29-8fb887208222)) + (pad "8" smd rect (at -4.4 4.445) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") + (net 181 "Net-(D18-Pad2)") (pinfunction "RD-") (pintype "passive") (tstamp 9a9743ff-4bc0-48d3-8f4c-cae442c5a846)) + (pad "9" smd rect (at 4.4 4.445) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 97 "Net-(C82-Pad2)") (pinfunction "RX-") (pintype "passive") (tstamp c4892d3d-ab20-48f9-baa5-4199dcbc038a)) - (pad "10" smd rect (at 4.4 3.175 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 347 "unconnected-(TR2-Pad10)") (pinfunction "C_RX") (pintype "passive+no_connect") (tstamp 871b5a9d-63ba-41ea-8d78-214f282791a1)) - (pad "11" smd rect (at 4.4 1.905 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") + (pad "10" smd rect (at 4.4 3.175) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") + (net 336 "unconnected-(TR2-Pad10)") (pinfunction "C_RX") (pintype "passive+no_connect") (tstamp 871b5a9d-63ba-41ea-8d78-214f282791a1)) + (pad "11" smd rect (at 4.4 1.905) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "RX+") (pintype "passive") (tstamp e92e949e-b94e-403b-b8fc-95d485f6e4d0)) - (pad "12" smd rect (at 4.4 0.635 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp 621bb1e1-4c85-4f6a-9fae-26fd24a3b053)) - (pad "13" smd rect (at 4.4 -0.635 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp b39ba172-06c0-4ad5-9697-1c5799cf1752)) - (pad "14" smd rect (at 4.4 -1.905 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 319 "Net-(R101-Pad1)") (pinfunction "TX-") (pintype "passive") (tstamp 74f2f348-1d28-453d-b285-247be31ae5c5)) - (pad "15" smd rect (at 4.4 -3.175 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") - (net 348 "unconnected-(TR2-Pad15)") (pinfunction "C_TX") (pintype "passive+no_connect") (tstamp 4f9aa9ca-5475-4529-a2aa-e7d604218329)) - (pad "16" smd rect (at 4.4 -4.445 180) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") + (pad "12" smd rect (at 4.4 0.635) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp 621bb1e1-4c85-4f6a-9fae-26fd24a3b053)) + (pad "13" smd rect (at 4.4 -0.635) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (tstamp b39ba172-06c0-4ad5-9697-1c5799cf1752)) + (pad "14" smd rect (at 4.4 -1.905) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") + (net 309 "Net-(R101-Pad1)") (pinfunction "TX-") (pintype "passive") (tstamp 74f2f348-1d28-453d-b285-247be31ae5c5)) + (pad "15" smd rect (at 4.4 -3.175) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") + (net 337 "unconnected-(TR2-Pad15)") (pinfunction "C_TX") (pintype "passive+no_connect") (tstamp 4f9aa9ca-5475-4529-a2aa-e7d604218329)) + (pad "16" smd rect (at 4.4 -4.445) (size 1.7 0.76) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "GND") (pinfunction "TX+") (pintype "passive") (tstamp 484c8e52-4135-4410-8a3f-05cd11b2716b)) (model "${KICAD6_3DMODEL_DIR}/Transformer_SMD.3dshapes/Transformer_Ethernet_Bourns_PT61017PEL.wrl" (offset (xyz 0 0 0)) @@ -21103,7 +21100,7 @@ (footprint "Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp e2279c93-00cc-4c04-b84e-e72907cb3f70) - (at 166.624 59.436) + (at 167.132 54.864) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -21134,7 +21131,7 @@ (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 659efeed-8433-4947-a5eb-1f507592b8d2)) (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp fdb9940a-430a-4069-8be2-44b154933fe2)) (pad "1" smd roundrect (at -1 0) (size 1.2 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.208333) - (net 283 "Net-(L23-Pad2)") (pintype "passive") (tstamp ffab818a-0b74-4a4f-ab84-7e2dd711e92f)) + (net 274 "Net-(L23-Pad2)") (pintype "passive") (tstamp ffab818a-0b74-4a4f-ab84-7e2dd711e92f)) (pad "2" smd roundrect (at 1 0) (size 1.2 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.208333) (net 2 "GND") (pintype "passive") (tstamp 1d1d981a-6b2d-428c-b635-1eefdc451c3d)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" @@ -21146,7 +21143,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp e37873ba-5aeb-4ddd-aec0-d950bf9cfdf0) - (at 153.355 220.621) + (at 155.448 141.986 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -21176,10 +21173,10 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 30e41841-fd83-4957-ba4d-e531a7259ce9)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 36d85b22-75ab-4a9a-a4a8-9e69fc320812)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp 618061e9-6468-4b94-936a-d0e908a488b7)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 143 "VGG2") (pintype "passive") (tstamp 53c303f9-504a-4015-a339-c204af13d5e8)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 352 "Net-(D22-Pad2)") (pintype "passive") (tstamp b9c36b3b-34e8-4007-b260-8da382aa6010)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 134 "VGG1") (pintype "passive") (tstamp 53c303f9-504a-4015-a339-c204af13d5e8)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 341 "Net-(D22-Pad2)") (pintype "passive") (tstamp b9c36b3b-34e8-4007-b260-8da382aa6010)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -21224,11 +21221,11 @@ (fp_line (start -0.325 -1.45) (end 0.65 -1.45) (layer "F.Fab") (width 0.1) (tstamp aab34a95-9129-43b0-acbb-9c63820c5d8e)) (fp_line (start -0.65 -1.125) (end -0.325 -1.45) (layer "F.Fab") (width 0.1) (tstamp e6757aac-7b52-4aab-b35f-b4a8889fc1e9)) (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 297 "Net-(Q13-Pad1)") (pinfunction "B") (pintype "input") (tstamp a00d7f75-7958-4223-9cd5-c596f47e04c3)) + (net 287 "Net-(Q13-Pad1)") (pinfunction "B") (pintype "input") (tstamp a00d7f75-7958-4223-9cd5-c596f47e04c3)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 62 "Net-(C53-Pad2)") (pinfunction "E") (pintype "passive") (tstamp 76dd58f3-c953-42e8-ae03-d922926daac0)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 173 "Net-(D8-Pad2)") (pinfunction "C") (pintype "passive") (tstamp eb4a78b9-cec1-4f2c-b17f-02c2806eac38)) + (net 167 "Net-(D8-Pad2)") (pinfunction "C") (pintype "passive") (tstamp eb4a78b9-cec1-4f2c-b17f-02c2806eac38)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -21271,7 +21268,7 @@ (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp b53fd2e3-48a4-4305-8b37-4f35287f6a66)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 313 "Net-(R35-Pad1)") (pintype "passive") (tstamp e6336beb-44d8-4c5e-9d77-018f78461eeb)) + (net 303 "Net-(R35-Pad1)") (pintype "passive") (tstamp e6336beb-44d8-4c5e-9d77-018f78461eeb)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -21281,7 +21278,7 @@ (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp e4e37778-8ddb-4fa6-a8e2-dc0966fedf20) - (at 221.869 47.117 90) + (at 220.472 46.99 90) (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2UASR56") @@ -21313,7 +21310,7 @@ (fp_line (start 1.25 1) (end -1.25 1) (layer "F.Fab") (width 0.1) (tstamp 9b4a0133-814b-4138-9907-4e6c90911ea5)) (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp a2f705ca-ddf7-4451-967c-fce99f831941)) (pad "1" smd roundrect (at -1.1625 0 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 360 "Net-(L29-Pad2)") (pinfunction "1") (pintype "passive") (tstamp ed18812d-192c-4e45-a92a-243ea142516f)) + (net 348 "Net-(L29-Pad2)") (pinfunction "1") (pintype "passive") (tstamp ed18812d-192c-4e45-a92a-243ea142516f)) (pad "2" smd roundrect (at 1.1625 0 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 962a9041-e529-42fa-a4fa-76abc186808b)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" @@ -21325,7 +21322,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp e550bcea-329b-4e78-b68d-92ec26b59157) - (at 149.005 218.281) + (at 157.48 145.796 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -21355,10 +21352,10 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 2a43599e-822c-47cb-8c14-ddc03d05fd6a)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp af54a49d-e6ad-40eb-89cf-c53b50be0b07)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c051aa5e-0259-4fd1-a581-7d554a942007)) - (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 136 "VGG1") (pintype "passive") (tstamp 5286122e-d640-491c-a828-bca7c96dcf32)) - (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 140 "Net-(C143-Pad2)") (pintype "passive") (tstamp 6bbe33cc-b74b-4e6a-a871-ebab8333f2ee)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 134 "VGG1") (pintype "passive") (tstamp 5286122e-d640-491c-a828-bca7c96dcf32)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 138 "Net-(C143-Pad2)") (pintype "passive") (tstamp 6bbe33cc-b74b-4e6a-a871-ebab8333f2ee)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -21399,9 +21396,9 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp c55da2a4-e07c-47e0-b5bc-0ccbc014a85d)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp ddb406b2-14b6-46a6-971f-4a441b1b1933)) (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 161 "Net-(C171-Pad1)") (pintype "passive") (tstamp b3f84ecb-2a6e-41ea-bdb8-3f781894508b)) + (net 155 "Net-(C171-Pad1)") (pintype "passive") (tstamp b3f84ecb-2a6e-41ea-bdb8-3f781894508b)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 160 "Net-(C169-Pad1)") (pintype "passive") (tstamp 707dc153-498b-4c98-a0c6-964ab054781a)) + (net 154 "Net-(C169-Pad1)") (pintype "passive") (tstamp 707dc153-498b-4c98-a0c6-964ab054781a)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -21411,7 +21408,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp e606384f-329a-4e73-8c42-a411d9fa5e40) - (at 111.76 53.848 90) + (at 105.306 53.848 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -21442,7 +21439,7 @@ (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 40724455-d86f-4fab-afe5-7fc1c17a77ab)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 5b97f7d9-db18-45ef-9a3c-d3b8930f2f53)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 251 "/Baseband/VHF_OUT") (pintype "passive") (tstamp 67723ad9-9e5a-4624-ac4a-06c2be76ec52)) + (net 244 "/Baseband/VHF_OUT") (pintype "passive") (tstamp 67723ad9-9e5a-4624-ac4a-06c2be76ec52)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 0b8fce3c-376c-43cc-ba1e-eed647eeab53)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -21454,7 +21451,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp e73bb231-72cd-4302-850c-cf4be3d2f1b7) - (at 184.404 48.26 -90) + (at 181.864 39.624 180) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -21463,15 +21460,15 @@ (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/d6b8523d-fc2f-4488-bcb0-553142124842") (attr smd) - (fp_text reference "C117" (at 0 -1.43 90) (layer "F.SilkS") + (fp_text reference "C117" (at 0 -1.43) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp 5e8f888c-4494-40ea-ba34-e82342fdb97a) ) - (fp_text value "36pF" (at 0 1.43 90) (layer "F.Fab") + (fp_text value "36pF" (at 0 1.43) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp 7a6806c7-016e-44af-81bc-0a62196151ce) ) - (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") (effects (font (size 0.4 0.4) (thickness 0.06))) (tstamp 2e44586c-7b8f-4df1-add2-10f39d4d2acb) ) @@ -21485,9 +21482,9 @@ (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp 94c20609-18d5-4892-8339-f35f382ddace)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp d257ed43-7f87-4d23-9b89-3ec8c2c81347)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp f7822186-d9fe-4c6d-a367-1c8196cebf69)) - (pad "1" smd roundrect (at -0.8625 0 270) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 5bb4df8c-e1dd-4e3b-8994-3866e43a4f2b)) - (pad "2" smd roundrect (at 0.8625 0 270) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "2" smd roundrect (at 0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 121 "Net-(C115-Pad2)") (pintype "passive") (tstamp 73bc4474-5467-45f6-8fea-f1faa68a56aa)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" (offset (xyz 0 0 0)) @@ -21575,7 +21572,7 @@ (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp d49bf89c-0cdc-4ba8-99d2-8c8ad0f1f8d5)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer "F.Fab") (width 0.1) (tstamp ddb08016-6aa3-464a-a630-0183fa032e31)) (pad "1" smd roundrect (at -0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 83d4e461-6d35-4b23-a8d3-ee1432bf320e)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 83d4e461-6d35-4b23-a8d3-ee1432bf320e)) (pad "2" smd roundrect (at 0.8625 0 90) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 0d3b191d-22c2-4462-ac5c-954ebbeb09a3)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" @@ -21647,101 +21644,101 @@ (fp_line (start -2.5 -3.5) (end 3.5 -3.5) (layer "F.Fab") (width 0.1) (tstamp 6469a4c7-f4d3-4647-b7af-9fecd37bfa05)) (fp_line (start -3.5 3.5) (end -3.5 -2.5) (layer "F.Fab") (width 0.1) (tstamp eb516649-34bb-48d6-9705-3589008315cc)) (pad "1" smd roundrect (at -4.1625 -2.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 364 "unconnected-(U11-Pad1)") (pinfunction "VBAT") (pintype "power_in+no_connect") (tstamp 38250e46-5f8a-4271-9ac2-c7f4064167b2)) + (net 352 "unconnected-(U11-Pad1)") (pinfunction "VBAT") (pintype "power_in+no_connect") (tstamp 38250e46-5f8a-4271-9ac2-c7f4064167b2)) (pad "2" smd roundrect (at -4.1625 -2.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 265 "/Control on separate board/PC13") (pinfunction "PC13") (pintype "bidirectional") (tstamp 679f5812-9221-41a6-8ab5-f8aa94e7cd1a)) + (net 256 "/Control on separate board/PC13") (pinfunction "PC13") (pintype "bidirectional") (tstamp 679f5812-9221-41a6-8ab5-f8aa94e7cd1a)) (pad "3" smd roundrect (at -4.1625 -1.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 264 "/Control on separate board/PC14") (pinfunction "PC14") (pintype "bidirectional") (tstamp 21520dbf-3bb0-4815-a71d-60281dc3f9e0)) + (net 255 "/Control on separate board/PC14") (pinfunction "PC14") (pintype "bidirectional") (tstamp 21520dbf-3bb0-4815-a71d-60281dc3f9e0)) (pad "4" smd roundrect (at -4.1625 -1.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 333 "/Control on separate board/ENC_BTN") (pinfunction "PC15") (pintype "bidirectional") (tstamp bc8c0b99-a6fc-4232-90ed-8d9dcbd22c3e)) + (net 322 "/Control on separate board/ENC_BTN") (pinfunction "PC15") (pintype "bidirectional") (tstamp bc8c0b99-a6fc-4232-90ed-8d9dcbd22c3e)) (pad "5" smd roundrect (at -4.1625 -0.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 334 "/Control on separate board/XTAL1") (pinfunction "PD0") (pintype "input") (tstamp 68b2a0d0-dd63-4c9d-8e48-110600170f85)) + (net 323 "/Control on separate board/XTAL1") (pinfunction "PD0") (pintype "input") (tstamp 68b2a0d0-dd63-4c9d-8e48-110600170f85)) (pad "6" smd roundrect (at -4.1625 -0.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 335 "/Control on separate board/XTAL2") (pinfunction "PD1") (pintype "input") (tstamp 5d355c2b-b367-47f1-a6bb-fde264f6948d)) + (net 324 "/Control on separate board/XTAL2") (pinfunction "PD1") (pintype "input") (tstamp 5d355c2b-b367-47f1-a6bb-fde264f6948d)) (pad "7" smd roundrect (at -4.1625 0.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 277 "/Control on separate board/RESETn") (pinfunction "NRST") (pintype "input") (tstamp 58408b79-ca73-4259-96e0-2756e21c9960)) + (net 268 "/Control on separate board/RESETn") (pinfunction "NRST") (pintype "input") (tstamp 58408b79-ca73-4259-96e0-2756e21c9960)) (pad "8" smd roundrect (at -4.1625 0.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "VSSA") (pintype "power_in") (tstamp d20538fc-89b2-44ea-8945-2f5682270055)) (pad "9" smd roundrect (at -4.1625 1.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 163 "Net-(C173-Pad2)") (pinfunction "VDDA") (pintype "power_in") (tstamp 224fb751-39d5-47e6-af8e-cb3b8c1da6bb)) + (net 157 "Net-(C173-Pad2)") (pinfunction "VDDA") (pintype "power_in") (tstamp 224fb751-39d5-47e6-af8e-cb3b8c1da6bb)) (pad "10" smd roundrect (at -4.1625 1.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 267 "/Control on separate board/PA0") (pinfunction "PA0") (pintype "bidirectional") (tstamp 52aa30bd-ea56-44bd-a594-35da592f793f)) + (net 258 "/Control on separate board/PA0") (pinfunction "PA0") (pintype "bidirectional") (tstamp 52aa30bd-ea56-44bd-a594-35da592f793f)) (pad "11" smd roundrect (at -4.1625 2.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 236 "/Control on separate board/MUTE_MICn") (pinfunction "PA1") (pintype "bidirectional") (tstamp 96dccaf7-cad4-40c0-8766-f7714dff30fd)) + (net 229 "/Control on separate board/MUTE_MICn") (pinfunction "PA1") (pintype "bidirectional") (tstamp 96dccaf7-cad4-40c0-8766-f7714dff30fd)) (pad "12" smd roundrect (at -4.1625 2.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 337 "/Control on separate board/MUTE_SPKR") (pinfunction "PA2") (pintype "bidirectional") (tstamp 46650874-91b1-47a6-bb5e-b5484816c828)) + (net 326 "/Control on separate board/MUTE_SPKR") (pinfunction "PA2") (pintype "bidirectional") (tstamp 46650874-91b1-47a6-bb5e-b5484816c828)) (pad "13" smd roundrect (at -2.75 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 230 "/Control on separate board/MIC_PTTn") (pinfunction "PA3") (pintype "bidirectional") (tstamp 0484d771-e071-412b-8e9f-999e8fe5d68c)) + (net 223 "/Control on separate board/MIC_PTTn") (pinfunction "PA3") (pintype "bidirectional") (tstamp 0484d771-e071-412b-8e9f-999e8fe5d68c)) (pad "14" smd roundrect (at -2.25 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 149 "/Control on separate board/GPIO_PA4") (pinfunction "PA4") (pintype "bidirectional") (tstamp 24cc27f0-b32c-4f34-b11a-c6f553720238)) + (net 146 "/Control on separate board/GPIO_PA4") (pinfunction "PA4") (pintype "bidirectional") (tstamp 24cc27f0-b32c-4f34-b11a-c6f553720238)) (pad "15" smd roundrect (at -1.75 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 233 "/Control on separate board/S_METER") (pinfunction "PA5") (pintype "bidirectional") (tstamp f38d8a06-9bff-442a-96e2-1f6e4355a548)) + (net 226 "/Control on separate board/S_METER") (pinfunction "PA5") (pintype "bidirectional") (tstamp f38d8a06-9bff-442a-96e2-1f6e4355a548)) (pad "16" smd roundrect (at -1.25 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 158 "/Control on separate board/ENC_A") (pinfunction "PA6") (pintype "bidirectional") (tstamp 5ab94a45-40a9-4216-9817-3b7832e57666)) + (net 152 "/Control on separate board/ENC_A") (pinfunction "PA6") (pintype "bidirectional") (tstamp 5ab94a45-40a9-4216-9817-3b7832e57666)) (pad "17" smd roundrect (at -0.75 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 157 "/Control on separate board/ENC_B") (pinfunction "PA7") (pintype "bidirectional") (tstamp b1a6ea1a-e318-4dd1-8b4b-3c4945bd439b)) + (net 151 "/Control on separate board/ENC_B") (pinfunction "PA7") (pintype "bidirectional") (tstamp b1a6ea1a-e318-4dd1-8b4b-3c4945bd439b)) (pad "18" smd roundrect (at -0.25 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 329 "/Control on separate board/BTN1") (pinfunction "PB0") (pintype "bidirectional") (tstamp aa9a5fe4-2fab-4a06-b41a-6ed1557882e8)) + (net 318 "/Control on separate board/BTN1") (pinfunction "PB0") (pintype "bidirectional") (tstamp aa9a5fe4-2fab-4a06-b41a-6ed1557882e8)) (pad "19" smd roundrect (at 0.25 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 328 "/Control on separate board/BTN0") (pinfunction "PB1") (pintype "bidirectional") (tstamp 0f38dd68-bbbd-4800-bd9f-9c157786edf2)) + (net 317 "/Control on separate board/BTN0") (pinfunction "PB1") (pintype "bidirectional") (tstamp 0f38dd68-bbbd-4800-bd9f-9c157786edf2)) (pad "20" smd roundrect (at 0.75 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 342 "/Control on separate board/BOOT1") (pinfunction "PB2") (pintype "bidirectional") (tstamp fa4c0fae-5ae7-4f0c-ab9a-4af363b8b6e5)) + (net 331 "/Control on separate board/BOOT1") (pinfunction "PB2") (pintype "bidirectional") (tstamp fa4c0fae-5ae7-4f0c-ab9a-4af363b8b6e5)) (pad "21" smd roundrect (at 1.25 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 263 "/Control on separate board/I2C2_SCL") (pinfunction "PB10") (pintype "bidirectional") (tstamp 3d3f78f5-aa2a-4354-869a-a741806a9265)) + (net 254 "/Control on separate board/I2C2_SCL") (pinfunction "PB10") (pintype "bidirectional") (tstamp 3d3f78f5-aa2a-4354-869a-a741806a9265)) (pad "22" smd roundrect (at 1.75 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 262 "/Control on separate board/I2C2_SDA") (pinfunction "PB11") (pintype "bidirectional") (tstamp beb05411-3427-4ec8-8e41-1695f3bff515)) + (net 253 "/Control on separate board/I2C2_SDA") (pinfunction "PB11") (pintype "bidirectional") (tstamp beb05411-3427-4ec8-8e41-1695f3bff515)) (pad "23" smd roundrect (at 2.25 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "VSS") (pintype "power_in") (tstamp 872ff4b9-e7f0-4034-bc2d-56cbea1ae59c)) (pad "24" smd roundrect (at 2.75 4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pinfunction "VDD") (pintype "power_in") (tstamp 8b53555e-3372-4009-9e9d-0c793cc092b8)) + (net 153 "/Control on separate board/3.3V_UI") (pinfunction "VDD") (pintype "power_in") (tstamp 8b53555e-3372-4009-9e9d-0c793cc092b8)) (pad "25" smd roundrect (at 4.1625 2.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 330 "/Control on separate board/BTN2") (pinfunction "PB12") (pintype "bidirectional") (tstamp 7a39cca6-f1e2-4bb6-ba4a-124c30b198f9)) + (net 319 "/Control on separate board/BTN2") (pinfunction "PB12") (pintype "bidirectional") (tstamp 7a39cca6-f1e2-4bb6-ba4a-124c30b198f9)) (pad "26" smd roundrect (at 4.1625 2.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 331 "/Control on separate board/BTN3") (pinfunction "PB13") (pintype "bidirectional") (tstamp db8093da-43f2-4e29-8b83-d02dd513abf0)) + (net 320 "/Control on separate board/BTN3") (pinfunction "PB13") (pintype "bidirectional") (tstamp db8093da-43f2-4e29-8b83-d02dd513abf0)) (pad "27" smd roundrect (at 4.1625 1.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 192 "/Control on separate board/STATUSn") (pinfunction "PB14") (pintype "bidirectional") (tstamp ccc5873a-50f7-4ee7-930c-a545c135c02a)) + (net 186 "/Control on separate board/STATUSn") (pinfunction "PB14") (pintype "bidirectional") (tstamp ccc5873a-50f7-4ee7-930c-a545c135c02a)) (pad "28" smd roundrect (at 4.1625 1.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 270 "/Control on separate board/PB15") (pinfunction "PB15") (pintype "bidirectional") (tstamp 847116c9-bc11-483c-b1f3-f51ead2505d1)) + (net 261 "/Control on separate board/PB15") (pinfunction "PB15") (pintype "bidirectional") (tstamp 847116c9-bc11-483c-b1f3-f51ead2505d1)) (pad "29" smd roundrect (at 4.1625 0.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 336 "/Control on separate board/PWM_CW") (pinfunction "PA8") (pintype "bidirectional") (tstamp f01e75d0-4766-4fdd-bb27-cca9cf7bab80)) + (net 325 "/Control on separate board/PWM_CW") (pinfunction "PA8") (pintype "bidirectional") (tstamp f01e75d0-4766-4fdd-bb27-cca9cf7bab80)) (pad "30" smd roundrect (at 4.1625 0.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 268 "/Control on separate board/USART1_TX") (pinfunction "PA9") (pintype "bidirectional") (tstamp ad5c1f6e-141d-4a00-8c26-22b261cde08e)) + (net 259 "/Control on separate board/USART1_TX") (pinfunction "PA9") (pintype "bidirectional") (tstamp ad5c1f6e-141d-4a00-8c26-22b261cde08e)) (pad "31" smd roundrect (at 4.1625 -0.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 269 "/Control on separate board/USART1_RX") (pinfunction "PA10") (pintype "bidirectional") (tstamp 95a29ff4-a668-466c-99ce-5167943a3093)) + (net 260 "/Control on separate board/USART1_RX") (pinfunction "PA10") (pintype "bidirectional") (tstamp 95a29ff4-a668-466c-99ce-5167943a3093)) (pad "32" smd roundrect (at 4.1625 -0.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 339 "Net-(R179-Pad2)") (pinfunction "PA11") (pintype "bidirectional") (tstamp b2034657-4e01-42fd-bf2d-0182b2bf33a1)) + (net 328 "Net-(R179-Pad2)") (pinfunction "PA11") (pintype "bidirectional") (tstamp b2034657-4e01-42fd-bf2d-0182b2bf33a1)) (pad "33" smd roundrect (at 4.1625 -1.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 340 "Net-(R180-Pad2)") (pinfunction "PA12") (pintype "bidirectional") (tstamp 9151a40b-6d71-4faa-9350-e38459fed203)) + (net 329 "Net-(R180-Pad2)") (pinfunction "PA12") (pintype "bidirectional") (tstamp 9151a40b-6d71-4faa-9350-e38459fed203)) (pad "34" smd roundrect (at 4.1625 -1.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 276 "/Control on separate board/SWDIO") (pinfunction "PA13") (pintype "bidirectional") (tstamp 894c51d4-caf5-474e-adca-8d8aa4efdaa0)) + (net 267 "/Control on separate board/SWDIO") (pinfunction "PA13") (pintype "bidirectional") (tstamp 894c51d4-caf5-474e-adca-8d8aa4efdaa0)) (pad "35" smd roundrect (at 4.1625 -2.25) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "VSS") (pintype "power_in") (tstamp 05a3cdf1-cb06-4698-9500-f121f4676d85)) (pad "36" smd roundrect (at 4.1625 -2.75) (size 1.475 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pinfunction "VDD") (pintype "power_in") (tstamp 5942ab5b-9840-4b7e-8c5b-93732b81eb29)) + (net 153 "/Control on separate board/3.3V_UI") (pinfunction "VDD") (pintype "power_in") (tstamp 5942ab5b-9840-4b7e-8c5b-93732b81eb29)) (pad "37" smd roundrect (at 2.75 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 275 "/Control on separate board/SWCLK") (pinfunction "PA14") (pintype "bidirectional") (tstamp 6f7026e4-24a3-46d8-ba15-5baa22e015e6)) + (net 266 "/Control on separate board/SWCLK") (pinfunction "PA14") (pintype "bidirectional") (tstamp 6f7026e4-24a3-46d8-ba15-5baa22e015e6)) (pad "38" smd roundrect (at 2.25 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 229 "/Control on separate board/CW_KEYn") (pinfunction "PA15") (pintype "bidirectional") (tstamp d40d39c5-113b-45a8-9633-8affa3a47811)) + (net 222 "/Control on separate board/CW_KEYn") (pinfunction "PA15") (pintype "bidirectional") (tstamp d40d39c5-113b-45a8-9633-8affa3a47811)) (pad "39" smd roundrect (at 1.75 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 232 "/Control on separate board/EN_RX") (pinfunction "PB3") (pintype "bidirectional") (tstamp 346dfb46-fc67-4d1e-85a2-5694db9208ad)) + (net 225 "/Control on separate board/EN_RX") (pinfunction "PB3") (pintype "bidirectional") (tstamp 346dfb46-fc67-4d1e-85a2-5694db9208ad)) (pad "40" smd roundrect (at 1.25 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 351 "unconnected-(U11-Pad40)") (pinfunction "PB4") (pintype "bidirectional") (tstamp 38078a53-b9e5-4ddc-9015-28ad2d198576)) + (net 340 "unconnected-(U11-Pad40)") (pinfunction "PB4") (pintype "bidirectional") (tstamp 38078a53-b9e5-4ddc-9015-28ad2d198576)) (pad "41" smd roundrect (at 0.75 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 231 "/Control on separate board/EN_TX") (pinfunction "PB5") (pintype "bidirectional") (tstamp b452e453-ef65-494c-96ee-7c38a8104b16)) + (net 224 "/Control on separate board/EN_TX") (pinfunction "PB5") (pintype "bidirectional") (tstamp b452e453-ef65-494c-96ee-7c38a8104b16)) (pad "42" smd roundrect (at 0.25 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 234 "/Control on separate board/SCL") (pinfunction "PB6") (pintype "bidirectional") (tstamp 5851650b-105e-42e3-84a7-87d2b79507ac)) + (net 227 "/Control on separate board/SCL") (pinfunction "PB6") (pintype "bidirectional") (tstamp 5851650b-105e-42e3-84a7-87d2b79507ac)) (pad "43" smd roundrect (at -0.25 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 235 "/Control on separate board/SDA") (pinfunction "PB7") (pintype "bidirectional") (tstamp 19182725-b8ce-4b53-8868-2968f8f29a0b)) + (net 228 "/Control on separate board/SDA") (pinfunction "PB7") (pintype "bidirectional") (tstamp 19182725-b8ce-4b53-8868-2968f8f29a0b)) (pad "44" smd roundrect (at -0.75 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 341 "/Control on separate board/BOOT0") (pinfunction "BOOT0") (pintype "input") (tstamp a79206b9-315b-4a1e-a8d6-78c597220710)) + (net 330 "/Control on separate board/BOOT0") (pinfunction "BOOT0") (pintype "input") (tstamp a79206b9-315b-4a1e-a8d6-78c597220710)) (pad "45" smd roundrect (at -1.25 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 227 "/Control on separate board/CW_TIP") (pinfunction "PB8") (pintype "bidirectional") (tstamp 7504fd34-3acd-4811-8d48-26f75f3ba897)) + (net 220 "/Control on separate board/CW_TIP") (pinfunction "PB8") (pintype "bidirectional") (tstamp 7504fd34-3acd-4811-8d48-26f75f3ba897)) (pad "46" smd roundrect (at -1.75 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 228 "/Control on separate board/CW_RING") (pinfunction "PB9") (pintype "bidirectional") (tstamp 9ebef4f7-71a6-4e4c-8b54-8c6aabb71af5)) + (net 221 "/Control on separate board/CW_RING") (pinfunction "PB9") (pintype "bidirectional") (tstamp 9ebef4f7-71a6-4e4c-8b54-8c6aabb71af5)) (pad "47" smd roundrect (at -2.25 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "VSS") (pintype "power_in") (tstamp 65517e0b-f44a-4407-a2ae-c6ef40da8b94)) (pad "48" smd roundrect (at -2.75 -4.1625) (size 0.3 1.475) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pinfunction "VDD") (pintype "power_in") (tstamp a2233000-c4c9-4e72-baf4-20009d356777)) + (net 153 "/Control on separate board/3.3V_UI") (pinfunction "VDD") (pintype "power_in") (tstamp a2233000-c4c9-4e72-baf4-20009d356777)) (model "${KICAD6_3DMODEL_DIR}/Package_QFP.3dshapes/LQFP-48_7x7mm_P0.5mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -21751,7 +21748,7 @@ (footprint "TestPoint:TestPoint_Pad_D2.0mm" (layer "F.Cu") (tedit 5A0F774F) (tstamp e9027add-135c-4754-a582-e9a1747430d4) - (at 165.608 94.996) + (at 166.878 94.996) (descr "SMD pad as test Point, diameter 2.0mm") (tags "test point SMD pad") (property "Sheetfile" "frontend_70.kicad_sch") @@ -21821,7 +21818,7 @@ (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp e9386b19-8092-49f1-af92-546da755a6ee) - (at 108.966 37.338 180) + (at 111.76 36.576 180) (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") (tags "inductor handsolder") (property "MPN" "LQW2UAS1R0x0CL") @@ -21853,7 +21850,7 @@ (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 5553192c-4259-469e-8573-d9c7267583e5)) (fp_line (start 1.25 1) (end -1.25 1) (layer "F.Fab") (width 0.1) (tstamp f1ab70b3-4a56-48b9-8dee-3f3ae93c4b3e)) (pad "1" smd roundrect (at -1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 279 "Net-(L14-Pad1)") (pinfunction "1") (pintype "passive") (tstamp fcad6fe4-60d7-4eab-acfa-609d81ee9ed8)) + (net 270 "Net-(L14-Pad1)") (pinfunction "1") (pintype "passive") (tstamp fcad6fe4-60d7-4eab-acfa-609d81ee9ed8)) (pad "2" smd roundrect (at 1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 95 "Net-(C81-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 09dc317e-37bd-4d8c-8b0f-a8f4ff0e76fb)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" @@ -21952,9 +21949,53 @@ ) ) + (footprint "Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEF0) (tstamp e9e78977-5391-433c-b907-02e0e35cf4f3) + (at 112.776 85.852 -90) + (descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator") + (tags "inductor handsolder") + (property "MPN" "LQW2UAS1R0x0CL") + (property "Need_order" "0") + (property "Sheetfile" "ant_switch.kicad_sch") + (property "Sheetname" "Antenna Switch") + (path "/2eb25ee2-d512-42fe-80f1-00400ed0a45e/f86c608b-89b9-4c69-adc9-c0a475e63f40") + (attr smd) + (fp_text reference "L1" (at 0 -2.05 90) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 9454ef5b-9a4e-41d7-9d35-7a21d9fd1c89) + ) + (fp_text value "1uH" (at 0 2.05 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 25719468-f9bd-491c-9009-31acf66b117b) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.62 0.62) (thickness 0.09))) + (tstamp 7ee10bf2-b520-4c64-a3ea-5255f7a5eab4) + ) + (fp_line (start -0.261252 -1.11) (end 0.261252 -1.11) (layer "F.SilkS") (width 0.12) (tstamp 10e68513-00a6-4f9a-8f51-65a0bb977041)) + (fp_line (start -0.261252 1.11) (end 0.261252 1.11) (layer "F.SilkS") (width 0.12) (tstamp b4b59c63-0ee5-4382-8534-981a183f6441)) + (fp_line (start -2.12 -1.35) (end 2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp 01aa3453-7c17-4f41-b2ca-067dab2d3590)) + (fp_line (start 2.12 1.35) (end -2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp 75a84049-7ae0-453d-b261-82e5d91b49e6)) + (fp_line (start 2.12 -1.35) (end 2.12 1.35) (layer "F.CrtYd") (width 0.05) (tstamp b1f67766-6e8b-4eab-bc86-677d2a65813d)) + (fp_line (start -2.12 1.35) (end -2.12 -1.35) (layer "F.CrtYd") (width 0.05) (tstamp f32b3de1-ba6f-49c5-9949-6d3baafcdf6a)) + (fp_line (start -1.25 1) (end -1.25 -1) (layer "F.Fab") (width 0.1) (tstamp 028eac3b-1e32-4892-aa4e-4e972f6840ef)) + (fp_line (start 1.25 1) (end -1.25 1) (layer "F.Fab") (width 0.1) (tstamp a446757e-3fec-4bb1-b934-b8df8ed3ebf9)) + (fp_line (start -1.25 -1) (end 1.25 -1) (layer "F.Fab") (width 0.1) (tstamp cef46265-165e-41a5-b1de-f0299c79fd95)) + (fp_line (start 1.25 -1) (end 1.25 1) (layer "F.Fab") (width 0.1) (tstamp e4b4b857-c2a0-4166-8ae5-b510d5480861)) + (pad "1" smd roundrect (at -1.1625 0 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 355 "/Antenna Switch/V_{PIN}") (pinfunction "1") (pintype "passive") (tstamp 50f9c3dc-2194-474e-8431-ab71b04af679)) + (pad "2" smd roundrect (at 1.1625 0 270) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (net 18 "Net-(C17-Pad1)") (pinfunction "2") (pintype "passive") (tstamp 2cfb079c-8e9f-47c4-89b7-0e98f90905bf)) + (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp ea4606ef-7d6d-4238-a6a9-8f1c927596d3) - (at 170.434 54.102 180) + (at 170.942 49.53 180) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -21986,7 +22027,7 @@ (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp 886bf402-8e4d-4ce0-81ec-ac2c33247cc1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp d1bfb1f2-f91a-4beb-93db-c1ecebc58a21)) (pad "1" smd roundrect (at -0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 266 "Net-(C93-Pad1)") (pintype "passive") (tstamp 95d37444-a615-4e52-955a-f0bfc11e28a4)) + (net 257 "Net-(C93-Pad1)") (pintype "passive") (tstamp 95d37444-a615-4e52-955a-f0bfc11e28a4)) (pad "2" smd roundrect (at 0.8625 0 180) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 103 "/70MHz VHF Frontend/VHF_RX") (pintype "passive") (tstamp be87124a-aa9a-42be-b8f5-70fedb3a792a)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" @@ -21998,7 +22039,7 @@ (footprint "TestPoint:TestPoint_Pad_D2.0mm" (layer "F.Cu") (tedit 5A0F774F) (tstamp ea496dfc-6124-4687-ab14-9639574a8cd2) - (at 175.26 92.964 -90) + (at 177.8 89.154 -90) (descr "SMD pad as test Point, diameter 2.0mm") (tags "test point SMD pad") (property "Need_order" "0") @@ -22074,9 +22115,9 @@ (pad "1" thru_hole circle (at 0 0 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "1") (pintype "passive") (tstamp fb678f2c-35df-4123-8057-150f18576b9e)) (pad "2" thru_hole circle (at 0 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) - (net 329 "/Control on separate board/BTN1") (pinfunction "2") (pintype "passive") (tstamp 4f62e26c-1910-428d-ae8a-b2a68ffb816c)) + (net 318 "/Control on separate board/BTN1") (pinfunction "2") (pintype "passive") (tstamp 4f62e26c-1910-428d-ae8a-b2a68ffb816c)) (pad "2" thru_hole circle (at 6.5 4.5 90) (size 2 2) (drill 1.1) (layers *.Cu *.Mask) - (net 329 "/Control on separate board/BTN1") (pinfunction "2") (pintype "passive") (tstamp a528b481-6c7a-45e3-8042-ed3df1a841cf)) + (net 318 "/Control on separate board/BTN1") (pinfunction "2") (pintype "passive") (tstamp a528b481-6c7a-45e3-8042-ed3df1a841cf)) (model "${KICAD6_3DMODEL_DIR}/Button_Switch_THT.3dshapes/SW_PUSH_6mm.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -22155,20 +22196,64 @@ (net 124 "Net-(C120-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 5dd8096f-fd75-4768-88cb-e05fe46ef1bf)) ) + (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") + (tedit 5F68FEEF) (tstamp eb2762bb-963b-4b90-866c-b1bf3c95044f) + (at 127.508 91.948 180) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor handsolder") + (property "MPN" "VJ0805A103KXJTBC") + (property "Need_order" "0") + (property "Sheetfile" "ant_switch.kicad_sch") + (property "Sheetname" "Antenna Switch") + (path "/2eb25ee2-d512-42fe-80f1-00400ed0a45e/43ee07cb-df04-45ff-ab07-f2405b80d5d3") + (attr smd) + (fp_text reference "C181" (at 0 -1.68) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 3f4ccc96-3cea-448c-9f50-be91d9031b71) + ) + (fp_text value "10nF" (at 0 1.68) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp eacfef18-c7b8-401c-85a8-6f56a9b3a8c4) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 2f8c6cd7-f93b-4e29-af4e-660b6aecf7da) + ) + (fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer "F.SilkS") (width 0.12) (tstamp 38d8c785-608f-4536-8a6f-a2bd9bf991ff)) + (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer "F.SilkS") (width 0.12) (tstamp e4dc1c74-fd4f-408a-9bcd-babc01dfb897)) + (fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer "F.CrtYd") (width 0.05) (tstamp 38adb59e-ee7a-4633-abc9-3f72ad270d62)) + (fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer "F.CrtYd") (width 0.05) (tstamp 3d4e0e39-6a40-4649-9543-8c107f8c2c09)) + (fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer "F.CrtYd") (width 0.05) (tstamp abf2b3f5-71e3-40fb-bdfc-fa9d6b59caff)) + (fp_line (start 1.88 0.98) (end -1.88 0.98) (layer "F.CrtYd") (width 0.05) (tstamp c41658f9-af77-42f3-937e-edb8a19c6806)) + (fp_line (start -1 0.625) (end -1 -0.625) (layer "F.Fab") (width 0.1) (tstamp 8ea60e22-65f9-4d07-b98b-0a0b1b3ba6a1)) + (fp_line (start 1 0.625) (end -1 0.625) (layer "F.Fab") (width 0.1) (tstamp 8ecdb1da-c868-4e82-a96f-d69eb21d54f9)) + (fp_line (start -1 -0.625) (end 1 -0.625) (layer "F.Fab") (width 0.1) (tstamp c87f7c24-302f-463e-a0ec-ed78c721c857)) + (fp_line (start 1 -0.625) (end 1 0.625) (layer "F.Fab") (width 0.1) (tstamp fca0d035-6ed0-4a54-841f-89373aa79ee9)) + (pad "1" smd roundrect (at -1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 354 "/Antenna Switch/ANT") (pintype "passive") (tstamp 620f5e87-cf51-4f03-9e4e-dd3c32e37778)) + (pad "2" smd roundrect (at 1.0375 0 180) (size 1.175 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.212766) + (net 367 "Net-(D24-Pad3)") (pintype "passive") (tstamp f03d9311-4fbe-4311-b41e-f5a7b7284536)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "mpb:AirCoil-8mm-or-2-series-1008" (layer "F.Cu") (tedit 5E4EB890) (tstamp ec0fe90c-07a2-48b2-8f81-ed2747fd4162) - (at 184.404 29.21 180) + (at 164.846 29.21 -90) (property "MPN" "2x LQW2UASR56") (property "Need_order" "1") (property "Sheetfile" "frontend_70.kicad_sch") (property "Sheetname" "70MHz VHF Frontend") (path "/8cbb5345-c7a6-41b7-8a2a-794c3d5f0f34/1f6fe2b8-ca02-48d7-a3d2-79857b6bdbef") (attr through_hole) - (fp_text reference "L37" (at 2.5 0 90) (layer "F.SilkS") + (fp_text reference "L37" (at 2.5 0) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))) (tstamp bd1e866c-f9e9-49c6-97a2-57937c5edfa2) ) - (fp_text value "110nH" (at -2.5 0 90) (layer "F.Fab") + (fp_text value "110nH" (at -2.5 0) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))) (tstamp a8d47ba4-4241-481d-b6c2-6f7272fb3e18) ) @@ -22190,15 +22275,15 @@ (fp_line (start -0.95 2.73) (end -0.95 0.23) (layer "F.Fab") (width 0.1) (tstamp b2e96215-2d1b-4aba-885f-1ed62ad9e226)) (fp_line (start 1.05 2.73) (end -0.95 2.73) (layer "F.Fab") (width 0.1) (tstamp d73ae510-1fce-4a87-b268-11a5022067ce)) (fp_line (start -0.95 -2.87) (end 1.05 -2.87) (layer "F.Fab") (width 0.1) (tstamp f94596f4-265f-4d5f-8dee-c9d7e4bc7c51)) - (pad "" smd roundrect (at 0.05 -0.4575 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp 8268e64f-3ca2-467b-bf51-78bdfe5e2e6a)) - (pad "" smd roundrect (at 0.05 0.3175 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp a661b0a4-6b3f-4fdb-9da0-c046dd690dff)) - (pad "1" thru_hole circle (at 0 -4 180) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) + (pad "" smd roundrect (at 0.05 -0.4575 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp 8268e64f-3ca2-467b-bf51-78bdfe5e2e6a)) + (pad "" smd roundrect (at 0.05 0.3175 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (tstamp a661b0a4-6b3f-4fdb-9da0-c046dd690dff)) + (pad "1" thru_hole circle (at 0 -4 270) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) (net 127 "Net-(C126-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 937c3073-b1b4-4633-9d3c-c407bf84679c)) - (pad "1" smd roundrect (at 0.05 -2.7825 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (pad "1" smd roundrect (at 0.05 -2.7825 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 127 "Net-(C126-Pad1)") (pinfunction "1") (pintype "passive") (tstamp cb3cfc10-d271-45b7-bc05-ae78f6f44633)) - (pad "2" thru_hole circle (at 0 4 180) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) + (pad "2" thru_hole circle (at 0 4 270) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp 8333b5ae-76f5-4cac-8923-1b1419a3bfe5)) - (pad "2" smd roundrect (at 0.05 2.6425 90) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) + (pad "2" smd roundrect (at 0.05 2.6425 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 2 "GND") (pinfunction "2") (pintype "passive") (tstamp a9216534-cd85-466d-9ddc-a8b75b83f348)) ) @@ -22238,7 +22323,7 @@ (pad "1" smd roundrect (at -1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) (net 106 "Net-(C96-Pad2)") (pinfunction "1") (pintype "passive") (tstamp 464dc3aa-ffbd-43e7-9e62-ce757253379f)) (pad "2" smd roundrect (at 1.1625 0 180) (size 1.425 2.2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.175439) - (net 359 "Net-(L27-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 925869bb-7178-47c7-bf5d-1b749fcb694f)) + (net 347 "Net-(L27-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 925869bb-7178-47c7-bf5d-1b749fcb694f)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -22422,7 +22507,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp efe22b82-8656-4f72-a93a-9a4228c10156) - (at -108.204 19.2005 90) + (at -22.098 25.2965 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -22500,7 +22585,7 @@ (fp_line (start 0.65 -1.45) (end 0.65 1.45) (layer "F.Fab") (width 0.1) (tstamp b13afe07-d029-47d3-ab4e-a5063b9278fd)) (fp_line (start -0.65 -1.125) (end -0.325 -1.45) (layer "F.Fab") (width 0.1) (tstamp eeb9a862-df63-43cc-9125-4b858a22dffe)) (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 300 "Net-(Q16-Pad2)") (pinfunction "D") (pintype "passive") (tstamp e113e7cf-f54a-4f6d-8f23-39e290799c2f)) + (net 290 "Net-(Q16-Pad2)") (pinfunction "D") (pintype "passive") (tstamp e113e7cf-f54a-4f6d-8f23-39e290799c2f)) (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 77 "Net-(C66-Pad2)") (pinfunction "S") (pintype "passive") (tstamp d33686b0-d7e4-44b9-83e1-41db12d3f770)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) @@ -22514,7 +22599,7 @@ (footprint "mpb:C_Trimmer_Voltronics_JZ" (layer "F.Cu") (tedit 590DA842) (tstamp f0cc7c86-3c99-4582-ab62-b5d288e2a2b5) - (at 104.5015 27.686 90) + (at 107.2955 26.924 90) (descr "trimmer capacitor SMD horizontal") (tags "Voltronics Knowles JZ series") (property "MPN" "JZ-300") @@ -22615,13 +22700,13 @@ (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 "GND") (pinfunction "AA") (pintype "passive") (tstamp fc5d6e94-b09f-4888-9621-1609e53b4a67)) (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 311 "Net-(R31-Pad1)") (pinfunction "AB") (pintype "passive") (tstamp 8090eb64-f77c-4f5b-af15-0ba87a5aef43)) + (net 301 "Net-(R31-Pad1)") (pinfunction "AB") (pintype "passive") (tstamp 8090eb64-f77c-4f5b-af15-0ba87a5aef43)) (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 168 "Net-(D5-Pad1)") (pinfunction "SA") (pintype "passive") (tstamp 7555088a-1fb3-45c0-806b-f4cc45e7ec19)) + (net 162 "Net-(D5-Pad1)") (pinfunction "SA") (pintype "passive") (tstamp 7555088a-1fb3-45c0-806b-f4cc45e7ec19)) (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 46 "Net-(C43-Pad2)") (pinfunction "SC") (pintype "passive") (tstamp e3b06907-1ed9-4e62-9c46-65e97418fb41)) (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 169 "Net-(D5-Pad2)") (pinfunction "SB") (pintype "passive") (tstamp 82c6f0b8-c347-48f4-8328-9362ffddf9ef)) + (net 163 "Net-(D5-Pad2)") (pinfunction "SB") (pintype "passive") (tstamp 82c6f0b8-c347-48f4-8328-9362ffddf9ef)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x05_P2.54mm_Vertical.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -22631,7 +22716,7 @@ (footprint "mpb:C_Trimmer_Voltronics_JZ" (layer "F.Cu") (tedit 590DA842) (tstamp f201d65e-1045-4c91-a2ff-2831bef9b1e1) - (at 66.802 28.1725 180) + (at 70.612 28.1725 180) (descr "trimmer capacitor SMD horizontal") (tags "Voltronics Knowles JZ series") (property "MPN" "JZ-300") @@ -22694,7 +22779,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp f25cf591-c328-4d45-a8ec-753bf6a865b5) - (at 166.37 67.564) + (at 166.878 65.024) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "08051A471GAT2A") @@ -22873,95 +22958,6 @@ ) ) - (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") - (tedit 56D1B4CB) (tstamp f3d70954-96dc-432b-af94-cc60f3cca8c0) - (at 144.575 198.701) - (descr "Mounting Hole 3.2mm, M3, DIN965") - (tags "mounting hole 3.2mm m3 din965") - (property "Need_order" "0") - (property "Sheetfile" "pa_70.kicad_sch") - (property "Sheetname" "PA 70MHz") - (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-00005fc1e04c") - (attr exclude_from_pos_files) - (fp_text reference "H24" (at 0 -3.8) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp f13a7864-23ac-42e6-aeca-20c6c8a4f44e) - ) - (fp_text value "M3" (at 0 3.8) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 6fb22ea3-4f03-48be-92e4-0bd5352239d9) - ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 8833adeb-a4aa-40c1-91ce-ce559527f4e3) - ) - (fp_circle (center 0 0) (end 2.8 0) (layer "Cmts.User") (width 0.15) (fill none) (tstamp 2cdc11fc-c62f-4916-8082-f1b0393d4314)) - (fp_circle (center 0 0) (end 3.05 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp fd1f0443-9af1-43ef-8862-67a88caa72ef)) - (pad "1" thru_hole circle (at 0 0) (size 5.6 5.6) (drill 3.2) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "1") (pintype "input") (tstamp a359da63-de67-4b40-99fc-581c868afd45)) - ) - - (footprint "Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical" (layer "F.Cu") - (tedit 59FED5CC) (tstamp f3defa40-661f-4602-a34e-26900f90e194) - (at 115.526 147.411) - (descr "Through hole straight pin header, 1x08, 2.54mm pitch, single row") - (tags "Through hole pin header THT 1x08 2.54mm single row") - (property "MPN" "SSW-108-01-G-S") - (property "Need_order" "0") - (property "Sheetfile" "kicad-dart-70.kicad_sch") - (property "Sheetname" "") - (path "/c56b8885-9af4-4cdd-81f2-1a645f694741") - (attr through_hole) - (fp_text reference "J17" (at 0 -2.33) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 7e68ad4e-bebc-41a9-8912-8880231abcdb) - ) - (fp_text value "PA to base" (at 0 20.11) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp c0d23a44-6c53-444d-831d-720cc22d6b0e) - ) - (fp_text user "${REFERENCE}" (at 0 8.89 90) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 2f68475a-7187-4dda-a6b0-5f20cacf4546) - ) - (fp_line (start 1.33 1.27) (end 1.33 19.11) (layer "F.SilkS") (width 0.12) (tstamp 006a91b7-e641-4c07-ba8d-a08d8d12c612)) - (fp_line (start -1.33 1.27) (end -1.33 19.11) (layer "F.SilkS") (width 0.12) (tstamp 0a05ec00-c2b4-4b64-9e5e-021169f3bb1e)) - (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer "F.SilkS") (width 0.12) (tstamp 1538381a-9779-4cde-b53d-c4faafa73deb)) - (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer "F.SilkS") (width 0.12) (tstamp 2ba088b8-95e1-4d0b-8e0b-052711b52fec)) - (fp_line (start -1.33 19.11) (end 1.33 19.11) (layer "F.SilkS") (width 0.12) (tstamp 4f0abc9b-9887-468b-bc4b-902fd67cfb78)) - (fp_line (start -1.33 0) (end -1.33 -1.33) (layer "F.SilkS") (width 0.12) (tstamp 673de389-fc4f-40a7-bef9-bb315753855c)) - (fp_line (start 1.8 19.55) (end 1.8 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp 645ac8c1-9de0-4866-8c44-95e52aa240e5)) - (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp 9511dc3f-b385-4859-8199-31eb86f75b93)) - (fp_line (start -1.8 -1.8) (end -1.8 19.55) (layer "F.CrtYd") (width 0.05) (tstamp a8e888e3-5727-4739-b6df-b5a2c83b35d0)) - (fp_line (start -1.8 19.55) (end 1.8 19.55) (layer "F.CrtYd") (width 0.05) (tstamp cdecf833-4958-415c-afe9-f68acdedbd4a)) - (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp 61130a6c-04af-4523-98f3-c356ae60491e)) - (fp_line (start -1.27 19.05) (end -1.27 -0.635) (layer "F.Fab") (width 0.1) (tstamp 8abba986-d1d4-4213-822c-3b0de521e2b7)) - (fp_line (start 1.27 19.05) (end -1.27 19.05) (layer "F.Fab") (width 0.1) (tstamp a975befc-9f37-4990-94c7-b518476ba2c4)) - (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp d5169010-234a-487c-9586-228e06ea2529)) - (fp_line (start 1.27 -1.27) (end 1.27 19.05) (layer "F.Fab") (width 0.1) (tstamp fc90a7f5-9c5f-4f40-9f72-7f5489a9d4f8)) - (pad "1" thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 135 "/PA 70MHz/12V") (pinfunction "Pin_1") (pintype "passive") (tstamp f0d0e876-4189-444e-8118-73e62566dee9)) - (pad "2" thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 135 "/PA 70MHz/12V") (pinfunction "Pin_2") (pintype "passive") (tstamp d5b975fc-4d0e-4670-898e-3bd16ebde2c8)) - (pad "3" thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 135 "/PA 70MHz/12V") (pinfunction "Pin_3") (pintype "passive") (tstamp 14a7910b-8e6f-4b55-898b-842f851bbe85)) - (pad "4" thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "Pin_4") (pintype "passive") (tstamp d036f82b-2013-4a33-92d2-f4f8e8ffc8ca)) - (pad "5" thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 252 "/PA 70MHz/PA_IN") (pinfunction "Pin_5") (pintype "passive") (tstamp b7349658-3312-48ef-bf70-ceae960e8dad)) - (pad "6" thru_hole oval (at 0 12.7) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "Pin_6") (pintype "passive") (tstamp c56b4782-1213-4d86-8b34-91c23578ba08)) - (pad "7" thru_hole oval (at 0 15.24) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "Pin_7") (pintype "passive") (tstamp 36a1e9ef-a557-4a50-a697-9cb1cea6e523)) - (pad "8" thru_hole oval (at 0 17.78) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 253 "/PA 70MHz/EN_PA") (pinfunction "Pin_8") (pintype "passive") (tstamp c11124f5-c7ae-4ca8-ac10-dca45613ef33)) - (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x08_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - (footprint "Crystal:Crystal_HC49-U_Vertical" (layer "F.Cu") (tedit 5A1AD3B8) (tstamp f3fbfdb4-d9cc-4617-b4a4-807273609d75) (at 56.563 148.9 180) @@ -23012,6 +23008,34 @@ ) ) + (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") + (tedit 56D1B4CB) (tstamp f4087a93-488e-49c4-ab8e-2a603b81603b) + (at 116.84 170.18) + (descr "Mounting Hole 3.2mm, M3, DIN965") + (tags "mounting hole 3.2mm m3 din965") + (property "Need_order" "0") + (property "Sheetfile" "pa_70.kicad_sch") + (property "Sheetname" "PA 70MHz") + (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/4df3825d-4635-4440-8940-4e2a0ab68f97") + (attr exclude_from_pos_files) + (fp_text reference "H39" (at 0 -3.8) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp e4246454-f198-4134-976e-0681779c2686) + ) + (fp_text value "M3" (at 0 3.8) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp d2d23130-547c-4cf6-afbe-9dd18b7054b7) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 28e27244-7b53-4d2d-bdb5-8697de6af248) + ) + (fp_circle (center 0 0) (end 2.8 0) (layer "Cmts.User") (width 0.15) (fill none) (tstamp 0a0878c5-0233-4eca-b552-2a3c13c0ea69)) + (fp_circle (center 0 0) (end 3.05 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp 29cd8d0f-b933-45b9-be3a-f89d5f0f2952)) + (pad "1" thru_hole circle (at 0 0) (size 5.6 5.6) (drill 3.2) (layers *.Cu *.Mask) + (net 2 "GND") (pinfunction "1") (pintype "input") (tstamp 7c53eb0e-f69d-46c3-b715-0294f00fcbd5)) + ) + (footprint "Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp f68241a9-fd32-4919-aada-6fdf75f20e96) (at 24.384 82.804) @@ -23048,7 +23072,7 @@ (pad "1" smd roundrect (at -0.875 0) (size 1.05 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 3 "Net-(C2-Pad1)") (pintype "passive") (tstamp f04f26e9-c403-404e-963a-3a5eecc5e22a)) (pad "2" smd roundrect (at 0.875 0) (size 1.05 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 210 "Net-(FB1-Pad2)") (pintype "passive") (tstamp 2ff9594c-f76b-440e-a55a-cea5201de738)) + (net 204 "Net-(FB1-Pad2)") (pintype "passive") (tstamp 2ff9594c-f76b-440e-a55a-cea5201de738)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -23056,9 +23080,57 @@ ) ) + (footprint "Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical" (layer "F.Cu") + (tedit 59FED5CC) (tstamp f76a7d82-ad96-4e1b-a8b7-a44a88769e52) + (at 149.611 187.96 -90) + (descr "Through hole straight pin header, 1x02, 2.54mm pitch, single row") + (tags "Through hole pin header THT 1x02 2.54mm single row") + (property "Need_order" "0") + (property "Sheetfile" "pa_70.kicad_sch") + (property "Sheetname" "PA 70MHz") + (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/699ee984-519f-4998-8f94-19a122981fe1") + (attr through_hole) + (fp_text reference "J19" (at 0 -2.33 90) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 6816c1ec-3159-4bfd-b648-0fb7b9858d36) + ) + (fp_text value "PA OUT" (at 0 4.87 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp fac72968-865b-4e78-9218-19be1c4f665b) + ) + (fp_text user "${REFERENCE}" (at 0 1.27) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 5afc6ac7-4731-4bfc-a0e8-6610b450a1db) + ) + (fp_line (start 1.33 1.27) (end 1.33 3.87) (layer "F.SilkS") (width 0.12) (tstamp 520d5383-a39c-4e62-a434-afe258f21588)) + (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer "F.SilkS") (width 0.12) (tstamp 7ee836a8-c87d-424a-9c1b-be059391d5b8)) + (fp_line (start -1.33 1.27) (end -1.33 3.87) (layer "F.SilkS") (width 0.12) (tstamp 92e35849-1f41-4527-acaa-f47f88b5cd83)) + (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer "F.SilkS") (width 0.12) (tstamp 9387ae48-bc14-46c9-b71e-66fe27f1e4f8)) + (fp_line (start -1.33 0) (end -1.33 -1.33) (layer "F.SilkS") (width 0.12) (tstamp 9641d66d-bb1a-47eb-b606-91973039a7fd)) + (fp_line (start -1.33 3.87) (end 1.33 3.87) (layer "F.SilkS") (width 0.12) (tstamp a0c2f68b-0330-4d9b-b460-0b8164078e3c)) + (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp 0ce851fd-bec3-4929-be22-ab520b8f734c)) + (fp_line (start -1.8 -1.8) (end -1.8 4.35) (layer "F.CrtYd") (width 0.05) (tstamp 28c64b9f-ac67-4b14-b636-1862897b93bc)) + (fp_line (start 1.8 4.35) (end 1.8 -1.8) (layer "F.CrtYd") (width 0.05) (tstamp 425dcdf6-5840-4bf2-a229-51b0861cd18e)) + (fp_line (start -1.8 4.35) (end 1.8 4.35) (layer "F.CrtYd") (width 0.05) (tstamp b4201e2d-08b4-473a-91d4-106d24801711)) + (fp_line (start 1.27 -1.27) (end 1.27 3.81) (layer "F.Fab") (width 0.1) (tstamp 13a2c161-f3bc-4f2c-b192-afc27cdc8e5d)) + (fp_line (start 1.27 3.81) (end -1.27 3.81) (layer "F.Fab") (width 0.1) (tstamp 6862ae13-0d80-43b3-b76e-7cf422726ebb)) + (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer "F.Fab") (width 0.1) (tstamp 7d462d7f-595b-4214-816d-d020cb0d83de)) + (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer "F.Fab") (width 0.1) (tstamp 85d50432-1a7e-488f-aaf7-737989216bc5)) + (fp_line (start -1.27 3.81) (end -1.27 -0.635) (layer "F.Fab") (width 0.1) (tstamp d78360a8-6225-4e3e-a7c5-d05c94c53d3e)) + (pad "1" thru_hole rect (at 0 0 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 365 "Net-(T9-Pad4)") (pinfunction "In") (pintype "passive") (tstamp 7c924fd5-201f-4d0d-81b7-c50f7cc1ddf9)) + (pad "2" thru_hole oval (at 0 2.54 270) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) + (net 2 "GND") (pinfunction "Ext") (pintype "passive") (tstamp d0d3cfe3-4863-4905-aedf-51ff4f4dc521)) + (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp f7aa55e6-52fd-4e75-970c-36133eebd743) - (at 66.294 24.6165) + (at 72.136 24.638) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "") @@ -23146,7 +23218,7 @@ (footprint "Package_TO_SOT_SMD:SOT-323_SC-70_Handsoldering" (layer "F.Cu") (tedit 5A02FF57) (tstamp f83fccd4-eca6-4495-ba46-53770b3e1b0a) - (at 96.52 34.29 -90) + (at 85.852 27.9185 90) (descr "SOT-323, SC-70 Handsoldering") (tags "SOT-323 SC-70 Handsoldering") (property "MPN" "BAT68-04W") @@ -23180,12 +23252,12 @@ (fp_line (start 0.675 1.1) (end -0.675 1.1) (layer "F.Fab") (width 0.1) (tstamp 32672195-7d91-4f7d-a9ca-64b12c0d8815)) (fp_line (start 0.675 -1.1) (end -0.175 -1.1) (layer "F.Fab") (width 0.1) (tstamp 9f0da279-1384-4140-b8ad-e6e47cf03a3f)) (fp_line (start -0.175 -1.1) (end -0.675 -0.6) (layer "F.Fab") (width 0.1) (tstamp a18ef8c8-b9c4-4d8e-9fe7-1c3e894ecbb1)) - (pad "1" smd rect (at -1.33 -0.65 180) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 187 "Net-(D18-Pad2)") (pintype "passive") (tstamp 11995a27-e8d3-4ccc-bf9d-aaf09d5d78aa)) - (pad "2" smd rect (at -1.33 0.65 180) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 186 "Net-(D18-Pad1)") (pintype "passive") (tstamp 3fceba71-f4ab-4d2a-bff0-8800400bceaa)) - (pad "3" smd rect (at 1.33 0 180) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") - (net 189 "Net-(D19-Pad3)") (pintype "passive") (tstamp af76aed6-4e96-433d-95ae-bba9b7bc0c44)) + (pad "1" smd rect (at -1.33 -0.65) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") + (net 181 "Net-(D18-Pad2)") (pintype "passive") (tstamp 11995a27-e8d3-4ccc-bf9d-aaf09d5d78aa)) + (pad "2" smd rect (at -1.33 0.65) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") + (net 180 "Net-(D18-Pad1)") (pintype "passive") (tstamp 3fceba71-f4ab-4d2a-bff0-8800400bceaa)) + (pad "3" smd rect (at 1.33 0) (size 0.45 1.5) (layers "F.Cu" "F.Paste" "F.Mask") + (net 183 "Net-(D19-Pad3)") (pintype "passive") (tstamp af76aed6-4e96-433d-95ae-bba9b7bc0c44)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-323_SC-70.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -23246,7 +23318,7 @@ (fp_line (start -6.4 0) (end -5.76 7.62) (layer "F.Fab") (width 0.1) (tstamp e7b10efc-a355-4f07-9256-257ee01cc247)) (fp_line (start -6.4 7.62) (end 6.4 7.62) (layer "F.Fab") (width 0.1) (tstamp f2defc3e-3cbe-4f50-bffa-2e2033252f6c)) (pad "1" thru_hole circle (at 0 0 90) (size 3 3) (drill 1.5) (layers *.Cu *.Mask) - (net 176 "Net-(D10-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 499146c7-290f-4d07-8568-d5d8410c2f2c)) + (net 170 "Net-(D10-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 499146c7-290f-4d07-8568-d5d8410c2f2c)) (pad "2" thru_hole circle (at 0 7.62 90) (size 3 3) (drill 1.5) (layers *.Cu *.Mask) (net 90 "Net-(C76-Pad2)") (pinfunction "2") (pintype "passive") (tstamp 1eb34273-a9d9-4337-96b0-985966f59322)) (model "${KICAD6_3DMODEL_DIR}/Inductor_THT.3dshapes/L_Toroid_Vertical_L16.0mm_W8.0mm_P7.62mm.wrl" @@ -23281,12 +23353,12 @@ (fp_circle (center 0 0) (end 0 0.95) (layer "F.SilkS") (width 0.12) (fill none) (tstamp 0c2f330a-7b26-44b5-9857-035530f31c74)) (fp_circle (center 0 0) (end 1.25 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp e7631199-b8bc-42ba-bf99-d8f668a5c137)) (pad "1" smd circle (at 0 0) (size 1.5 1.5) (layers "F.Cu" "F.Mask") - (net 314 "Net-(R36-Pad1)") (pinfunction "1") (pintype "passive") (tstamp a49bbda0-57b8-4267-94f8-da866946d461)) + (net 304 "Net-(R36-Pad1)") (pinfunction "1") (pintype "passive") (tstamp a49bbda0-57b8-4267-94f8-da866946d461)) ) (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp f914b43b-dd0b-4e45-b2f1-38e7547cff50) - (at 105.664 37.338 90) + (at 108.458 36.576 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -23327,77 +23399,6 @@ ) ) - (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") - (tedit 5F68FEEE) (tstamp fa66eb4c-ca0d-4a6a-85f0-4ae0207d4321) - (at -86.742 80.746 180) - (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") - (tags "resistor handsolder") - (property "Need_order" "0") - (property "Sheetfile" "kicad-dart-70.kicad_sch") - (property "Sheetname" "") - (path "/4ff44b8a-f882-4101-ba1b-2b7d72ee6891") - (attr smd) - (fp_text reference "R12" (at 0 -1.43) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 16c6ef39-7835-4695-ae3e-8d355f3ae188) - ) - (fp_text value "680" (at 0 1.43) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 2c76000e-de7e-4c3f-bd1e-290e24c8cf4b) - ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 0.4 0.4) (thickness 0.06))) - (tstamp 8822e992-efda-4317-b247-2152a01c3a92) - ) - (fp_line (start -0.254724 0.5225) (end 0.254724 0.5225) (layer "F.SilkS") (width 0.12) (tstamp 95d92e2c-99df-40a0-bbfe-44c909666b29)) - (fp_line (start -0.254724 -0.5225) (end 0.254724 -0.5225) (layer "F.SilkS") (width 0.12) (tstamp ab292268-ef9d-490b-a33c-e5ed07904cde)) - (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp 3c21dd86-bfee-46c7-a9b5-c111ff962276)) - (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer "F.CrtYd") (width 0.05) (tstamp 82fb5047-a240-46ab-bfe0-7ae6545c8329)) - (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer "F.CrtYd") (width 0.05) (tstamp cca4ab2a-8ff4-4db3-b4dc-d147813b751c)) - (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer "F.CrtYd") (width 0.05) (tstamp f148aecb-3ef9-46ba-9c13-749f53ce7113)) - (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 51b68dc6-b392-4501-ae42-3018ef98e33f)) - (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp 7c3ea895-9e67-4158-bd54-a1c6768c7c90)) - (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp ae314b16-a8de-499c-adfd-c8ec6f4577fb)) - (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp ce0fc53c-d022-4025-8e5c-111b796f3238)) - (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 256 "+VTX") (pintype "passive") (tstamp 142670b0-4c3b-45fc-b076-faa0d21007f5)) - (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 167 "Net-(D2-Pad1)") (pintype "passive") (tstamp da24a231-ce38-4ded-ac37-38e8031558ab)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "MountingHole:MountingHole_3.2mm_M3_DIN965_Pad" (layer "F.Cu") - (tedit 56D1B4CB) (tstamp fad9a8c2-a152-4835-852b-e3e965da53dd) - (at 116.796 141.046) - (descr "Mounting Hole 3.2mm, M3, DIN965") - (tags "mounting hole 3.2mm m3 din965") - (property "Need_order" "0") - (property "Sheetfile" "kicad-dart-70.kicad_sch") - (property "Sheetname" "") - (path "/d96244d3-a15b-4966-b56a-996446bd3519") - (attr exclude_from_pos_files) - (fp_text reference "H38" (at 0 -3.8) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 557e56f0-01f1-457d-840e-cd15ea2eafcf) - ) - (fp_text value "M3" (at 0 3.8) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp ec6ae234-f1de-4c14-b46a-8b61b0ebb50b) - ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 170b9e5b-07e1-4dbf-a121-9769e32fb142) - ) - (fp_circle (center 0 0) (end 2.8 0) (layer "Cmts.User") (width 0.15) (fill none) (tstamp 03dad1ab-d2fd-4995-b307-04acb43993b5)) - (fp_circle (center 0 0) (end 3.05 0) (layer "F.CrtYd") (width 0.05) (fill none) (tstamp 04bd156f-976f-487c-9060-d77b5e6a2e88)) - (pad "1" thru_hole circle (at 0 0) (size 5.6 5.6) (drill 3.2) (layers *.Cu *.Mask) - (net 2 "GND") (pinfunction "1") (pintype "input") (tstamp b09c4179-7b3f-40e9-9a4e-c5a5ba1fd224)) - ) - (footprint "Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical" (layer "F.Cu") (tedit 59FED5CC) (tstamp fb50a593-875c-4879-952d-1fa77cc3a510) (at 37.846 33.518 180) @@ -23438,7 +23439,7 @@ (pad "1" thru_hole rect (at 0 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 5 "+9VA") (pinfunction "Pin_1") (pintype "passive") (tstamp 0e2595ae-318f-43c9-b10a-22f549bc6ac0)) (pad "2" thru_hole oval (at 0 2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) - (net 242 "/Baseband/CW_KEYn") (pinfunction "Pin_2") (pintype "passive") (tstamp 27ae7d4a-62bd-4ff9-a3d1-6c73cb192eb2)) + (net 235 "/Baseband/CW_KEYn") (pinfunction "Pin_2") (pintype "passive") (tstamp 27ae7d4a-62bd-4ff9-a3d1-6c73cb192eb2)) (pad "3" thru_hole oval (at 0 5.08 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 102 "Net-(C90-Pad2)") (pinfunction "Pin_3") (pintype "passive") (tstamp 58f088d1-c9e6-402d-8823-e161257f6c46)) (pad "4" thru_hole oval (at 0 7.62 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) @@ -23483,9 +23484,9 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp dbebe383-e8ca-4080-b942-f5728a46c651)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp ef424c58-9669-44b6-843c-273a9337a98e)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp b6f118c7-fd6f-42da-90de-59b377ae819f)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp b6f118c7-fd6f-42da-90de-59b377ae819f)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 235 "/Control on separate board/SDA") (pintype "passive") (tstamp 7fab4788-15b9-4d5e-88b8-aa783bc5f238)) + (net 228 "/Control on separate board/SDA") (pintype "passive") (tstamp 7fab4788-15b9-4d5e-88b8-aa783bc5f238)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -23572,7 +23573,7 @@ (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 2d0bef56-c589-430f-8c36-d2cb703d9291)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 312 "Net-(R31-Pad2)") (pintype "passive") (tstamp 319f8e91-2556-4fd7-88e8-3b8ad21368d0)) + (net 302 "Net-(R31-Pad2)") (pintype "passive") (tstamp 319f8e91-2556-4fd7-88e8-3b8ad21368d0)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -23582,7 +23583,7 @@ (footprint "mpb:AirCoil-20mm" (layer "F.Cu") (tedit 5E4EB890) (tstamp fc77338a-d175-4df5-948d-380495ae3c53) - (at 170.434 59.69) + (at 170.942 55.118) (property "MPN" "") (property "Need_order" "0") (property "Sheetfile" "frontend_70.kicad_sch") @@ -23607,7 +23608,7 @@ (fp_arc (start 0 4.5) (mid -1.5 3) (end 0 1.5) (layer "F.SilkS") (width 0.15) (tstamp 2ed7d532-c7e0-4ac4-8bce-128af767e8c0)) (fp_arc (start 0 -1.5) (mid -1.5 -3) (end 0 -4.5) (layer "F.SilkS") (width 0.15) (tstamp 2f0e98f8-c669-463d-aac1-5969090c3f63)) (pad "1" thru_hole circle locked (at 0 -7.5) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) - (net 266 "Net-(C93-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 1cbe861b-301d-4731-ab76-59647c9b378b)) + (net 257 "Net-(C93-Pad1)") (pinfunction "1") (pintype "passive") (tstamp 1cbe861b-301d-4731-ab76-59647c9b378b)) (pad "2" thru_hole circle locked (at 0 7.5) (size 2 2) (drill 1.2) (layers *.Cu *.Mask) (net 107 "Net-(C100-Pad2)") (pinfunction "2") (pintype "passive") (tstamp e4c5a755-45a7-4125-82cf-0ab4c2ac9a33)) ) @@ -23642,7 +23643,7 @@ (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEE) (tstamp fd14871e-6838-439c-a3be-14dcd0140ab3) - (at 168.91 77.47 180) + (at 172.72 73.914) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (property "Need_order" "0") @@ -23672,9 +23673,9 @@ (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer "F.Fab") (width 0.1) (tstamp b7c89908-a290-48ab-bb5c-320eb6a0accd)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp e1ac0d98-e353-4c55-bb4c-d6bedba72f90)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer "F.Fab") (width 0.1) (tstamp ec768303-15eb-4adc-9a6a-2435879773a6)) - (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 109 "Net-(C102-Pad2)") (pintype "passive") (tstamp 4ca49a6e-85cb-428f-8462-eaa4ad359345)) - (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 943adceb-99ee-449b-a3a8-8a09891ec673)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) @@ -23685,7 +23686,7 @@ (footprint "Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder" (layer "F.Cu") (tedit 5F68FEEF) (tstamp fd214739-07cc-4ef4-ac85-52b4b93ba239) - (at 226.187 35.179 -90) + (at 227.076 35.179 -90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (property "MPN" "CBR") @@ -23727,50 +23728,6 @@ ) ) - (footprint "Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder" (layer "F.Cu") - (tedit 5F68FEEF) (tstamp fe252a36-3d2e-4daf-aae7-b62bf6a7a6b5) - (at 134.205 222.011) - (descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") - (tags "capacitor handsolder") - (property "MPN" "TAJA106K016RNJ") - (property "Need_order" "0") - (property "Sheetfile" "pa_70.kicad_sch") - (property "Sheetname" "PA 70MHz") - (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-00006061694b") - (attr smd) - (fp_text reference "C152" (at 0 -2.3) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 471157ae-6721-43f2-8eb3-ccfd8874c698) - ) - (fp_text value "10uF" (at 0 2.3) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp eb8150b7-0ae1-4c4a-89cb-058a6dc4e1aa) - ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 0.8 0.8) (thickness 0.12))) - (tstamp 224c5ec2-6fdf-46cd-80bd-5026887fefc2) - ) - (fp_line (start -0.711252 -1.36) (end 0.711252 -1.36) (layer "F.SilkS") (width 0.12) (tstamp 8c7e1ea5-a08d-4b4b-a561-31a10948cc06)) - (fp_line (start -0.711252 1.36) (end 0.711252 1.36) (layer "F.SilkS") (width 0.12) (tstamp ffa7985a-9d80-4133-821b-49895067f677)) - (fp_line (start 2.48 -1.6) (end 2.48 1.6) (layer "F.CrtYd") (width 0.05) (tstamp 02082496-c9fc-4d4d-8e65-39ce9cff640b)) - (fp_line (start 2.48 1.6) (end -2.48 1.6) (layer "F.CrtYd") (width 0.05) (tstamp 9f474616-10be-4f6d-a428-8e9ee24b8bb4)) - (fp_line (start -2.48 1.6) (end -2.48 -1.6) (layer "F.CrtYd") (width 0.05) (tstamp c333faba-de49-4f57-b216-9458c635bba7)) - (fp_line (start -2.48 -1.6) (end 2.48 -1.6) (layer "F.CrtYd") (width 0.05) (tstamp eae71c98-a669-411d-996e-99f26fbc1415)) - (fp_line (start -1.6 -1.25) (end 1.6 -1.25) (layer "F.Fab") (width 0.1) (tstamp 3a81417d-3718-48c8-871a-fc3e7a20608a)) - (fp_line (start 1.6 1.25) (end -1.6 1.25) (layer "F.Fab") (width 0.1) (tstamp b56adcec-6cb0-4578-bf75-0c00db1f4fe2)) - (fp_line (start 1.6 -1.25) (end 1.6 1.25) (layer "F.Fab") (width 0.1) (tstamp ec9d2ad6-5c48-4553-997a-e75de66968fe)) - (fp_line (start -1.6 1.25) (end -1.6 -1.25) (layer "F.Fab") (width 0.1) (tstamp f5c61b05-eced-48b0-bd47-2f7b2418d9a6)) - (pad "1" smd roundrect (at -1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) - (net 135 "/PA 70MHz/12V") (pintype "passive") (tstamp 1e596b65-d60a-4283-9bc2-5446d2665631)) - (pad "2" smd roundrect (at 1.5625 0) (size 1.325 2.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.188679) - (net 2 "GND") (pintype "passive") (tstamp 56f59782-a86b-4428-92ce-eedaa0921865)) - (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - (footprint "Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder" (layer "F.Cu") (tedit 5F68FEF0) (tstamp fea801d9-a59d-4352-a618-2fb31f6c4865) (at 87.63 73.406 90) @@ -23849,7 +23806,7 @@ (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp ac59d5eb-dd70-42c3-b29a-b80ee16d259c)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer "F.Fab") (width 0.1) (tstamp e1d0a72f-f90b-4eb8-b82d-ee6a508a4af5)) (pad "1" smd roundrect (at -0.8625 0 270) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) - (net 160 "Net-(C169-Pad1)") (pintype "passive") (tstamp c9dc5aeb-1ace-4651-b463-aa02b1132476)) + (net 154 "Net-(C169-Pad1)") (pintype "passive") (tstamp c9dc5aeb-1ace-4651-b463-aa02b1132476)) (pad "2" smd roundrect (at 0.8625 0 270) (size 1.075 0.95) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp f8e7950a-546f-4bf8-bc50-e5d1ff647e05)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" @@ -24069,7 +24026,7 @@ (pad "1" smd roundrect (at -1.0375 0) (size 1.175 1.45) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp d5ac1b48-d735-4896-bf88-f4e756c7a764)) (pad "2" smd roundrect (at 1.0375 0) (size 1.175 1.45) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.212766) - (net 157 "/Control on separate board/ENC_B") (pintype "passive") (tstamp 5abbcbe1-b61f-44ce-8f9a-785e563d83d8)) + (net 151 "/Control on separate board/ENC_B") (pintype "passive") (tstamp 5abbcbe1-b61f-44ce-8f9a-785e563d83d8)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -24226,7 +24183,7 @@ (pad "1" smd roundrect (at -1.1625 0) (size 1.425 2.2) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.175439) (net 2 "GND") (pinfunction "1") (pintype "passive") (tstamp a0d48361-30a1-4b43-a480-1b5c3f2f5e57)) (pad "2" smd roundrect (at 1.1625 0) (size 1.425 2.2) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.175439) - (net 175 "Net-(D10-Pad3)") (pinfunction "2") (pintype "passive") (tstamp 6223c9bf-5304-40f6-8298-72a6cfe55c34)) + (net 169 "Net-(D10-Pad3)") (pinfunction "2") (pintype "passive") (tstamp 6223c9bf-5304-40f6-8298-72a6cfe55c34)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -24279,6 +24236,49 @@ ) ) + (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "B.Cu") + (tedit 5F68FEEE) (tstamp 0c1aa8d3-ebf7-47a3-a608-884732a0be62) + (at 126.873 46.482 90) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor handsolder") + (property "Need_order" "0") + (property "Sheetfile" "pa_70.kicad_sch") + (property "Sheetname" "PA 70MHz") + (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/2d2ea35e-1881-44fd-a6fd-f7cc9da6f251") + (attr smd) + (fp_text reference "R153" (at 0 1.43 90) (layer "B.SilkS") + (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) + (tstamp 648bca5b-4ffa-40e5-9922-74d777bcf450) + ) + (fp_text value "10k" (at 0 -1.43 90) (layer "B.Fab") + (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) + (tstamp 96fe4aef-862e-4e71-8280-730c83fbb138) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "B.Fab") + (effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror)) + (tstamp bb24d0ee-f788-4671-a079-242e8261ce09) + ) + (fp_line (start -0.254724 -0.5225) (end 0.254724 -0.5225) (layer "B.SilkS") (width 0.12) (tstamp 93c867db-0e34-4052-8348-e7ff96a16ac5)) + (fp_line (start -0.254724 0.5225) (end 0.254724 0.5225) (layer "B.SilkS") (width 0.12) (tstamp d47bc00f-5dd5-440f-ad8b-c707368914c8)) + (fp_line (start 1.65 0.73) (end 1.65 -0.73) (layer "B.CrtYd") (width 0.05) (tstamp 23cf8030-c86f-49dc-968d-b7bae6e5b385)) + (fp_line (start 1.65 -0.73) (end -1.65 -0.73) (layer "B.CrtYd") (width 0.05) (tstamp a2a8c9ee-5ffd-41f7-85e7-a92cb1dc457f)) + (fp_line (start -1.65 -0.73) (end -1.65 0.73) (layer "B.CrtYd") (width 0.05) (tstamp a4dca203-eaa0-4a15-ab04-3b452d4bea36)) + (fp_line (start -1.65 0.73) (end 1.65 0.73) (layer "B.CrtYd") (width 0.05) (tstamp be3ff309-e421-4d5a-9874-3ccf8f33f63a)) + (fp_line (start 0.8 0.4125) (end 0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp 04e2c795-ce7c-451a-abb1-012724a9d5e1)) + (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp 91e3d122-2798-4ee2-8180-5359244fd3ca)) + (fp_line (start -0.8 -0.4125) (end -0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp 943b4a1e-e0e3-44c2-9acd-023cc1364d64)) + (fp_line (start -0.8 0.4125) (end 0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp d90f76d0-e27a-468d-aa85-b141cc816036)) + (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) + (net 2 "GND") (pintype "passive") (tstamp cb592244-cd4b-484f-bb45-5e9b9aac2b8f)) + (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) + (net 233 "/EN_VTX") (pintype "passive") (tstamp 6ff4dd04-faff-407c-8122-7cfce48faae3)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical_SMD" (layer "B.Cu") (tedit 59FED5CC) (tstamp 0e7b39d8-aec4-4de0-ad71-b61c43f114db) (at 213.36 146.304 -90) @@ -24349,21 +24349,21 @@ (fp_line (start -3.6 -3.49) (end -3.6 -4.13) (layer "B.Fab") (width 0.1) (tstamp feff5d75-3d3d-4e4f-b7b0-99c4ef5042e6)) (fp_line (start -2.54 -5.08) (end -2.54 4.13) (layer "B.Fab") (width 0.1) (tstamp ff73d701-6956-477c-9228-3dbe7b5dc19b)) (pad "1" smd rect (at -2.525 3.81 270) (size 3.15 1) (layers "B.Cu" "B.Paste" "B.Mask") - (net 159 "/Control on separate board/3.3V_UI") (pinfunction "Pin_1") (pintype "passive") (tstamp 77272986-31fc-4ae2-92e0-5e072e1f215e)) + (net 153 "/Control on separate board/3.3V_UI") (pinfunction "Pin_1") (pintype "passive") (tstamp 77272986-31fc-4ae2-92e0-5e072e1f215e)) (pad "2" smd rect (at 2.525 3.81 270) (size 3.15 1) (layers "B.Cu" "B.Paste" "B.Mask") - (net 267 "/Control on separate board/PA0") (pinfunction "Pin_2") (pintype "passive") (tstamp c2900bff-1697-45c6-832c-9d87cd871e83)) + (net 258 "/Control on separate board/PA0") (pinfunction "Pin_2") (pintype "passive") (tstamp c2900bff-1697-45c6-832c-9d87cd871e83)) (pad "3" smd rect (at -2.525 1.27 270) (size 3.15 1) (layers "B.Cu" "B.Paste" "B.Mask") - (net 268 "/Control on separate board/USART1_TX") (pinfunction "Pin_3") (pintype "passive") (tstamp f54ee336-fe29-4da9-a759-59fe980e12ed)) + (net 259 "/Control on separate board/USART1_TX") (pinfunction "Pin_3") (pintype "passive") (tstamp f54ee336-fe29-4da9-a759-59fe980e12ed)) (pad "4" smd rect (at 2.525 1.27 270) (size 3.15 1) (layers "B.Cu" "B.Paste" "B.Mask") - (net 263 "/Control on separate board/I2C2_SCL") (pinfunction "Pin_4") (pintype "passive") (tstamp f7581e8e-da30-447f-8c9d-d1673d999e9e)) + (net 254 "/Control on separate board/I2C2_SCL") (pinfunction "Pin_4") (pintype "passive") (tstamp f7581e8e-da30-447f-8c9d-d1673d999e9e)) (pad "5" smd rect (at -2.525 -1.27 270) (size 3.15 1) (layers "B.Cu" "B.Paste" "B.Mask") - (net 269 "/Control on separate board/USART1_RX") (pinfunction "Pin_5") (pintype "passive") (tstamp b8de4d96-9054-4480-a1fc-77d220844931)) + (net 260 "/Control on separate board/USART1_RX") (pinfunction "Pin_5") (pintype "passive") (tstamp b8de4d96-9054-4480-a1fc-77d220844931)) (pad "6" smd rect (at 2.525 -1.27 270) (size 3.15 1) (layers "B.Cu" "B.Paste" "B.Mask") - (net 262 "/Control on separate board/I2C2_SDA") (pinfunction "Pin_6") (pintype "passive") (tstamp f2e028e2-9f11-4e23-a270-17520a02da7f)) + (net 253 "/Control on separate board/I2C2_SDA") (pinfunction "Pin_6") (pintype "passive") (tstamp f2e028e2-9f11-4e23-a270-17520a02da7f)) (pad "7" smd rect (at -2.525 -3.81 270) (size 3.15 1) (layers "B.Cu" "B.Paste" "B.Mask") (net 2 "GND") (pinfunction "Pin_7") (pintype "passive") (tstamp 883a7db8-e08e-41d7-a229-64d0d200d3d0)) (pad "8" smd rect (at 2.525 -3.81 270) (size 3.15 1) (layers "B.Cu" "B.Paste" "B.Mask") - (net 270 "/Control on separate board/PB15") (pinfunction "Pin_8") (pintype "passive") (tstamp cc6fd883-93d5-4da9-a62e-d6c7af15edeb)) + (net 261 "/Control on separate board/PB15") (pinfunction "Pin_8") (pintype "passive") (tstamp cc6fd883-93d5-4da9-a62e-d6c7af15edeb)) (model "${KICAD6_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_2x04_P2.54mm_Vertical_SMD.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -24404,9 +24404,9 @@ (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp 577f0844-5ee1-4e83-ab3a-0a03401a517c)) (fp_line (start -0.8 -0.4125) (end -0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp 5f752cc1-95e2-43a6-90de-5fe3534ac7de)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 329 "/Control on separate board/BTN1") (pintype "passive") (tstamp 9e3cbe8e-b3cb-4245-b40d-3f79713044a1)) + (net 318 "/Control on separate board/BTN1") (pintype "passive") (tstamp 9e3cbe8e-b3cb-4245-b40d-3f79713044a1)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp b88b5d67-f731-4287-a488-1296a850316b)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp b88b5d67-f731-4287-a488-1296a850316b)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -24414,6 +24414,56 @@ ) ) + (footprint "Package_TO_SOT_SMD:SOT-223-3_TabPin2" (layer "B.Cu") + (tedit 5A02FF57) (tstamp 16cd5eb4-f5d8-4bd2-b7ca-e012e0833188) + (at 129.667 53.213 -90) + (descr "module CMS SOT223 4 pins") + (tags "CMS SOT") + (property "Need_order" "0") + (property "Sheetfile" "pa_70.kicad_sch") + (property "Sheetname" "PA 70MHz") + (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-000060783d01") + (attr smd) + (fp_text reference "U10" (at 0 4.5 90) (layer "B.SilkS") + (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) + (tstamp f94c8b96-2a6a-4903-836a-502210e15e56) + ) + (fp_text value "LD1117S50" (at 0 -4.5 90) (layer "B.Fab") + (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) + (tstamp 890d26a7-00dc-4f79-9d7c-cfc67e9591dd) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "B.Fab") + (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) + (tstamp 70812cb6-1379-42c0-9720-bc0aacf1ebd0) + ) + (fp_line (start 1.91 3.41) (end 1.91 2.15) (layer "B.SilkS") (width 0.12) (tstamp 75cdf5e9-ce74-489e-9c66-13dca65e3ed7)) + (fp_line (start -4.1 3.41) (end 1.91 3.41) (layer "B.SilkS") (width 0.12) (tstamp 7ac00ed2-4d6a-4a7d-b44f-1d02657c1fee)) + (fp_line (start 1.91 -3.41) (end 1.91 -2.15) (layer "B.SilkS") (width 0.12) (tstamp b5a1c0b7-efaf-48a7-ac75-0f341df79ed7)) + (fp_line (start -1.85 -3.41) (end 1.91 -3.41) (layer "B.SilkS") (width 0.12) (tstamp c1c6f953-6813-41e6-9b08-c79e5a32b4ec)) + (fp_line (start -4.4 -3.6) (end 4.4 -3.6) (layer "B.CrtYd") (width 0.05) (tstamp 1e234840-f0e5-45a4-93a2-e552130c7b84)) + (fp_line (start 4.4 -3.6) (end 4.4 3.6) (layer "B.CrtYd") (width 0.05) (tstamp 5f728b02-cc3b-41ee-a4c9-d5eded962456)) + (fp_line (start 4.4 3.6) (end -4.4 3.6) (layer "B.CrtYd") (width 0.05) (tstamp 6bb5797a-8b62-47fa-8a78-0610a4833cbe)) + (fp_line (start -4.4 3.6) (end -4.4 -3.6) (layer "B.CrtYd") (width 0.05) (tstamp d75769d1-e748-437c-a1ec-81f29fae18a0)) + (fp_line (start -1.85 -3.35) (end 1.85 -3.35) (layer "B.Fab") (width 0.1) (tstamp 03349828-b6c3-43b0-addc-4db6fc85cca2)) + (fp_line (start -1.85 2.35) (end -1.85 -3.35) (layer "B.Fab") (width 0.1) (tstamp 3cccb7ad-e855-4288-8808-ceefb17ee7fe)) + (fp_line (start 1.85 3.35) (end 1.85 -3.35) (layer "B.Fab") (width 0.1) (tstamp 4fb89d22-01e4-4343-884b-8766141c65ed)) + (fp_line (start -1.85 2.35) (end -0.85 3.35) (layer "B.Fab") (width 0.1) (tstamp c7f4f4d2-7b72-454e-bd19-c398655608b0)) + (fp_line (start -0.85 3.35) (end 1.85 3.35) (layer "B.Fab") (width 0.1) (tstamp fb4f724d-0174-4d54-bc53-5f794e1ad964)) + (pad "1" smd rect (at -3.15 2.3 270) (size 2 1.5) (layers "B.Cu" "B.Paste" "B.Mask") + (net 2 "GND") (pinfunction "GND") (pintype "power_in") (tstamp 354aaf3d-bf64-48a0-83b6-234695e7076d)) + (pad "2" smd rect (at -3.15 0 270) (size 2 1.5) (layers "B.Cu" "B.Paste" "B.Mask") + (net 362 "Net-(C154-Pad1)") (pinfunction "VO") (pintype "power_out") (tstamp 2e00c070-fffc-4142-b4d8-c03e6f45a1b5)) + (pad "2" smd rect (at 3.15 0 270) (size 2 3.8) (layers "B.Cu" "B.Paste" "B.Mask") + (net 362 "Net-(C154-Pad1)") (pinfunction "VO") (pintype "power_out") (tstamp d6d4cb1e-4994-4e3d-b205-80f61b27c964)) + (pad "3" smd rect (at -3.15 -2.3 270) (size 2 1.5) (layers "B.Cu" "B.Paste" "B.Mask") + (net 237 "Net-(Q30-Pad5)") (pinfunction "VI") (pintype "power_in") (tstamp 6b468b49-8494-420a-b118-ee70fc92e48d)) + (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-223.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "B.Cu") (tedit 5F68FEEE) (tstamp 1cbd2ddc-5f73-4b79-887c-1f54ab273b30) (at 34.798 70.866) @@ -24492,7 +24542,7 @@ (fp_line (start -1.6 -1.25) (end -1.6 1.25) (layer "B.Fab") (width 0.1) (tstamp ce5965b7-ec96-430f-bd28-3a92048a334f)) (fp_line (start 1.6 -1.25) (end -1.6 -1.25) (layer "B.Fab") (width 0.1) (tstamp e2b8344c-984a-4d04-a36c-32b60919f2ce)) (pad "1" smd roundrect (at -1.5625 0 270) (size 1.325 2.7) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) - (net 166 "/Control on separate board/5V") (pintype "passive") (tstamp e1e460bc-77af-4f39-8076-56e48cb256ef)) + (net 160 "/Control on separate board/5V") (pintype "passive") (tstamp e1e460bc-77af-4f39-8076-56e48cb256ef)) (pad "2" smd roundrect (at 1.5625 0 270) (size 1.325 2.7) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) (net 2 "GND") (pintype "passive") (tstamp 65199f65-402c-44b0-b800-ff950745008b)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" @@ -24633,9 +24683,9 @@ (fp_line (start -0.8 0.4125) (end 0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp c2a496d7-08e2-4490-a0bf-2b34d16d7d47)) (fp_line (start 0.8 0.4125) (end 0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp f94bb262-9184-4890-bce9-8795f9fb13e5)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 330 "/Control on separate board/BTN2") (pintype "passive") (tstamp 152ce48c-3f37-418d-94ae-8a0dfac55bba)) + (net 319 "/Control on separate board/BTN2") (pintype "passive") (tstamp 152ce48c-3f37-418d-94ae-8a0dfac55bba)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 47756563-9317-4e3d-aa42-2a5f91898b51)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 47756563-9317-4e3d-aa42-2a5f91898b51)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -24677,7 +24727,7 @@ (fp_line (start -0.8 0.4) (end 0.8 0.4) (layer "B.Fab") (width 0.1) (tstamp 7e830708-e439-43fe-b7c3-af08545e57bb)) (fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer "B.Fab") (width 0.1) (tstamp f28c77fd-94b0-44d1-b45a-9d7adb42107d)) (pad "1" smd roundrect (at -0.8625 0 270) (size 1.075 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 9ead37b9-87bc-42ce-994f-2f211faa1e30)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 9ead37b9-87bc-42ce-994f-2f211faa1e30)) (pad "2" smd roundrect (at 0.8625 0 270) (size 1.075 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp b1dd1e78-94ae-4c2f-9fcd-6d04130355d1)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl" @@ -24765,9 +24815,9 @@ (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp d1bfb16b-345d-410a-a177-c25ad4d05ab7)) (fp_line (start -0.8 0.4125) (end 0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp e4f431c7-1920-4c53-a2da-953f6f4b459a)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 5f7c0e6f-0f82-4482-9623-e39418609961)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 5f7c0e6f-0f82-4482-9623-e39418609961)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 273 "/Control on separate board/USB_DP") (pintype "passive") (tstamp 1f63d439-577b-4acb-91d5-e0b806397b60)) + (net 264 "/Control on separate board/USB_DP") (pintype "passive") (tstamp 1f63d439-577b-4acb-91d5-e0b806397b60)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -24812,11 +24862,11 @@ (fp_line (start -0.325 1.45) (end 0.65 1.45) (layer "B.Fab") (width 0.1) (tstamp 7713fef4-d655-48b6-a339-021c9c416027)) (fp_line (start 0.65 1.45) (end 0.65 -1.45) (layer "B.Fab") (width 0.1) (tstamp c79e2cb7-921e-4ab2-8a1e-ad6fe8534e04)) (pad "1" smd roundrect (at -0.9375 0.95) (size 1.475 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 165 "Net-(C176-Pad1)") (pinfunction "B") (pintype "input") (tstamp 5914dd97-d339-4adb-b2f1-76b1ceb29e9e)) + (net 159 "Net-(C176-Pad1)") (pinfunction "B") (pintype "input") (tstamp 5914dd97-d339-4adb-b2f1-76b1ceb29e9e)) (pad "2" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "E") (pintype "passive") (tstamp 78c19095-699a-438c-8b53-b6fe0638b489)) (pad "3" smd roundrect (at 0.9375 0) (size 1.475 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 237 "/Control on separate board/SPKR_VOL") (pinfunction "C") (pintype "passive") (tstamp 843eaee1-178c-497c-aca7-6484e7b57d33)) + (net 230 "/Control on separate board/SPKR_VOL") (pinfunction "C") (pintype "passive") (tstamp 843eaee1-178c-497c-aca7-6484e7b57d33)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -24861,9 +24911,9 @@ (fp_line (start -0.175 1.1) (end -0.675 0.6) (layer "B.Fab") (width 0.1) (tstamp c99fce72-5a8d-4da9-906b-69db93cfa018)) (fp_line (start 0.675 1.1) (end 0.675 -1.1) (layer "B.Fab") (width 0.1) (tstamp f6af4d02-eb36-4c38-b549-dfb103a9ec01)) (pad "1" smd rect (at -1.33 0.65 270) (size 0.45 1.5) (layers "B.Cu" "B.Paste" "B.Mask") - (net 168 "Net-(D5-Pad1)") (pintype "passive") (tstamp a2b9e8b4-be50-450a-ae7a-6df36ee7c6b0)) + (net 162 "Net-(D5-Pad1)") (pintype "passive") (tstamp a2b9e8b4-be50-450a-ae7a-6df36ee7c6b0)) (pad "2" smd rect (at -1.33 -0.65 270) (size 0.45 1.5) (layers "B.Cu" "B.Paste" "B.Mask") - (net 169 "Net-(D5-Pad2)") (pintype "passive") (tstamp 2d021b28-78ce-4d2a-9333-8377c916ba6b)) + (net 163 "Net-(D5-Pad2)") (pintype "passive") (tstamp 2d021b28-78ce-4d2a-9333-8377c916ba6b)) (pad "3" smd rect (at 1.33 0 270) (size 0.45 1.5) (layers "B.Cu" "B.Paste" "B.Mask") (net 49 "Net-(C45-Pad2)") (pintype "passive") (tstamp fccb92e2-8eea-404e-9756-5c231854a3cc)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-323_SC-70.wrl" @@ -24906,9 +24956,9 @@ (fp_line (start -0.8 0.4125) (end 0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp e954b458-99be-4f13-b9a5-21176df265cf)) (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp f0afa156-2ea2-4c71-b852-0920e8e430a3)) (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 356 "/Baseband/3V3_MIC") (pintype "passive") (tstamp 110d61e3-b6c9-407f-bfa3-aea22425f74b)) + (net 344 "/Baseband/3V3_MIC") (pintype "passive") (tstamp 110d61e3-b6c9-407f-bfa3-aea22425f74b)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 246 "/MUTE_MICn") (pintype "passive") (tstamp f1f27e95-442b-470d-9c53-1ad724fd6439)) + (net 239 "/MUTE_MICn") (pintype "passive") (tstamp f1f27e95-442b-470d-9c53-1ad724fd6439)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -25083,9 +25133,9 @@ (fp_line (start -0.8 -0.4125) (end -0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp 81f8d86b-e379-4313-b8d4-d2f037d7bb04)) (fp_line (start 0.8 0.4125) (end 0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp 91fb1149-c4f2-4434-9956-4b52f5b651ea)) (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 326 "Net-(R160-Pad1)") (pintype "passive") (tstamp a680aeb0-60ef-4079-a373-34970e6654aa)) + (net 315 "Net-(R160-Pad1)") (pintype "passive") (tstamp a680aeb0-60ef-4079-a373-34970e6654aa)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 1ae5b90b-2c4a-45b9-8bdc-a5f17a7aab55)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 1ae5b90b-2c4a-45b9-8bdc-a5f17a7aab55)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -25130,9 +25180,9 @@ (fp_line (start -0.325 1.45) (end 0.65 1.45) (layer "B.Fab") (width 0.1) (tstamp dc71ac4c-cda9-4132-8213-e317ae7d48a3)) (fp_line (start -0.65 1.125) (end -0.325 1.45) (layer "B.Fab") (width 0.1) (tstamp f7e605bc-c0c1-4358-92ef-4c655610b0ed)) (pad "1" smd roundrect (at -0.9375 0.95 180) (size 1.475 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 290 "Net-(Q6-Pad1)") (pinfunction "B") (pintype "input") (tstamp 0b89625c-f0cd-421c-b842-d193cde5c5b7)) + (net 281 "Net-(Q6-Pad1)") (pinfunction "B") (pintype "input") (tstamp 0b89625c-f0cd-421c-b842-d193cde5c5b7)) (pad "2" smd roundrect (at -0.9375 -0.95 180) (size 1.475 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 291 "Net-(Q6-Pad2)") (pinfunction "E") (pintype "passive") (tstamp 72475a51-42a8-4f09-a0de-c0652947a1be)) + (net 359 "/Baseband/AGC_to_METER") (pinfunction "E") (pintype "passive") (tstamp 72475a51-42a8-4f09-a0de-c0652947a1be)) (pad "3" smd roundrect (at 0.9375 0 180) (size 1.475 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) (net 38 "/Baseband/VAGC") (pinfunction "C") (pintype "passive") (tstamp 46a0f9bc-d6ae-4241-b2de-8608f9aee72e)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl" @@ -25220,9 +25270,9 @@ (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp fe2f66d9-186e-44b2-8f79-479862236b2a)) (fp_line (start -0.8 0.4125) (end 0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp ff39faad-6f49-4433-91a7-b5a3347a24f5)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp ddc2cc1f-4d2f-4110-a738-cce220feeee0)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp ddc2cc1f-4d2f-4110-a738-cce220feeee0)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 263 "/Control on separate board/I2C2_SCL") (pintype "passive") (tstamp ec7ad9a2-2535-4fd3-940c-034e69e6e643)) + (net 254 "/Control on separate board/I2C2_SCL") (pintype "passive") (tstamp ec7ad9a2-2535-4fd3-940c-034e69e6e643)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -25264,7 +25314,7 @@ (fp_line (start 1.6 1.25) (end 1.6 -1.25) (layer "B.Fab") (width 0.1) (tstamp deeb2659-ed95-46cd-a823-b1a165d54005)) (fp_line (start -1.6 1.25) (end 1.6 1.25) (layer "B.Fab") (width 0.1) (tstamp faf248a2-d876-48cf-9202-eb4cad17dadc)) (pad "1" smd roundrect (at -1.5625 0 270) (size 1.325 2.7) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 47e83447-e42a-4c5f-8212-d3d99823f053)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 47e83447-e42a-4c5f-8212-d3d99823f053)) (pad "2" smd roundrect (at 1.5625 0 270) (size 1.325 2.7) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) (net 2 "GND") (pintype "passive") (tstamp ee0505d2-6d5f-4d9c-a3e0-744bf320797e)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" @@ -25307,9 +25357,9 @@ (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp abdcd133-8bcf-410f-a6ca-d83bdfe9d3d9)) (fp_line (start 0.8 0.4125) (end 0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp e2c92a69-6cc8-4fd0-b077-40f0decc44a8)) (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 326 "Net-(R160-Pad1)") (pintype "passive") (tstamp 5c26471d-1cc4-4883-9f1e-39a1db10de0e)) + (net 315 "Net-(R160-Pad1)") (pintype "passive") (tstamp 5c26471d-1cc4-4883-9f1e-39a1db10de0e)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 157 "/Control on separate board/ENC_B") (pintype "passive") (tstamp c0c69d5a-fc44-436f-9fbd-12f8242121dc)) + (net 151 "/Control on separate board/ENC_B") (pintype "passive") (tstamp c0c69d5a-fc44-436f-9fbd-12f8242121dc)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -25352,7 +25402,7 @@ (fp_line (start 1.6 -1.25) (end -1.6 -1.25) (layer "B.Fab") (width 0.1) (tstamp 58bb7402-8a54-4d83-9459-949793b6dc15)) (fp_line (start -1.6 -1.25) (end -1.6 1.25) (layer "B.Fab") (width 0.1) (tstamp fb2a572f-3d72-4a50-99b7-b32f30be4af5)) (pad "1" smd roundrect (at -1.5625 0 90) (size 1.325 2.7) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) - (net 350 "/+3V3_CLK") (pintype "passive") (tstamp 26e3c058-345b-4628-849e-960292c27b70)) + (net 339 "/+3V3_CLK") (pintype "passive") (tstamp 26e3c058-345b-4628-849e-960292c27b70)) (pad "2" smd roundrect (at 1.5625 0 90) (size 1.325 2.7) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) (net 2 "GND") (pintype "passive") (tstamp 0b8fb48d-98a6-4ce5-b647-359c7d911b70)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" @@ -25396,7 +25446,7 @@ (fp_line (start 1 0.625) (end 1 -0.625) (layer "B.Fab") (width 0.1) (tstamp e50b72a1-b50f-4efc-b4f9-253a0d574ae0)) (fp_line (start -1 -0.625) (end -1 0.625) (layer "B.Fab") (width 0.1) (tstamp f866bbe7-7ca2-47fb-bf93-070f777d1e91)) (pad "1" smd roundrect (at -1.0375 0 90) (size 1.175 1.45) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.212766) - (net 165 "Net-(C176-Pad1)") (pintype "passive") (tstamp 31264269-0d0e-4ec2-aa50-d1b07c5ccb7b)) + (net 159 "Net-(C176-Pad1)") (pintype "passive") (tstamp 31264269-0d0e-4ec2-aa50-d1b07c5ccb7b)) (pad "2" smd roundrect (at 1.0375 0 90) (size 1.175 1.45) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp 259e9792-7f4e-4108-bc7c-2615dce7ddca)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" @@ -25463,19 +25513,19 @@ (pad "1" smd roundrect (at -4.375 2.4 270) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "Pin_1") (pintype "passive") (tstamp 2293be3d-fc12-4ca9-8292-814c20913384)) (pad "2" smd roundrect (at -3.125 2.4 270) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 219 "Net-(J4-PadTN)") (pinfunction "Pin_2") (pintype "passive") (tstamp a7be72b1-3046-4c13-b4b4-e43c3c3cc032)) + (net 212 "Net-(J4-PadTN)") (pinfunction "Pin_2") (pintype "passive") (tstamp a7be72b1-3046-4c13-b4b4-e43c3c3cc032)) (pad "3" smd roundrect (at -1.875 2.4 270) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 218 "Net-(J4-PadR)") (pinfunction "Pin_3") (pintype "passive") (tstamp cea8a45a-4808-417c-87dc-2940903a5102)) + (net 211 "Net-(J4-PadR)") (pinfunction "Pin_3") (pintype "passive") (tstamp cea8a45a-4808-417c-87dc-2940903a5102)) (pad "4" smd roundrect (at -0.625 2.4 270) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "Pin_4") (pintype "passive") (tstamp 9a444a0d-de5a-47ce-8584-db0b2731482b)) (pad "5" smd roundrect (at 0.625 2.4 270) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 223 "unconnected-(J6-Pad5)") (pinfunction "Pin_5") (pintype "passive") (tstamp c20d81d0-85ad-4d6a-80e7-d5cb8b5748c3)) + (net 216 "unconnected-(J6-Pad5)") (pinfunction "Pin_5") (pintype "passive") (tstamp c20d81d0-85ad-4d6a-80e7-d5cb8b5748c3)) (pad "6" smd roundrect (at 1.875 2.4 270) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 216 "Net-(J3-PadT)") (pinfunction "Pin_6") (pintype "passive") (tstamp c8fcdef1-2a77-4c45-844a-e8f9d75433a9)) + (net 209 "Net-(J3-PadT)") (pinfunction "Pin_6") (pintype "passive") (tstamp c8fcdef1-2a77-4c45-844a-e8f9d75433a9)) (pad "7" smd roundrect (at 3.125 2.4 270) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 213 "Net-(J3-PadR1)") (pinfunction "Pin_7") (pintype "passive") (tstamp d8083d75-1591-4266-93de-bc74222ed1e3)) + (net 206 "Net-(J3-PadR1)") (pinfunction "Pin_7") (pintype "passive") (tstamp d8083d75-1591-4266-93de-bc74222ed1e3)) (pad "8" smd roundrect (at 4.375 2.4 270) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 215 "Net-(J3-PadS)") (pinfunction "Pin_8") (pintype "passive") (tstamp fcfd4875-97ea-4357-bcfe-72aeea86bb7e)) + (net 208 "Net-(J3-PadS)") (pinfunction "Pin_8") (pintype "passive") (tstamp fcfd4875-97ea-4357-bcfe-72aeea86bb7e)) (pad "MP" smd roundrect (at -6.925 -0.5 270) (size 2.1 3) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.119048) (tstamp 0b3f83be-0574-415f-a451-f4d3d4a8797f)) (pad "MP" smd roundrect (at 6.925 -0.5 270) (size 2.1 3) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.119048) (tstamp 6fea8464-692b-4bde-81a2-5cebfe7e886c)) (model "${KICAD6_3DMODEL_DIR}/Connector_Molex.3dshapes/Molex_PicoBlade_53261-0871_1x08-1MP_P1.25mm_Horizontal.wrl" @@ -25520,7 +25570,7 @@ (fp_line (start 1.6 1.25) (end 1.6 -1.25) (layer "B.Fab") (width 0.1) (tstamp dc5f3f99-f11a-4e62-8860-483a6db57aa8)) (fp_line (start -1.6 1.25) (end 1.6 1.25) (layer "B.Fab") (width 0.1) (tstamp e1fd8941-5b3a-4c1a-bc60-32c29475976d)) (pad "1" smd roundrect (at -1.5625 0) (size 1.325 2.7) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp bd44d296-32e7-44d9-ac08-1fa6dece8ab9)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp bd44d296-32e7-44d9-ac08-1fa6dece8ab9)) (pad "2" smd roundrect (at 1.5625 0) (size 1.325 2.7) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) (net 2 "GND") (pintype "passive") (tstamp cc499291-3714-403b-b8e7-d41c2fc00e4d)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" @@ -25585,19 +25635,19 @@ (fp_line (start -7.375 -1.6) (end -7.375 -2.2) (layer "B.Fab") (width 0.1) (tstamp e94d27fd-8bb1-40b0-8c77-24e272b2fb94)) (fp_line (start 7.375 -2.2) (end 5.875 -2.2) (layer "B.Fab") (width 0.1) (tstamp ed6eedd8-3f30-4782-a07a-314b539aa716)) (pad "1" smd roundrect (at -4.375 2.4 180) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 228 "/Control on separate board/CW_RING") (pinfunction "Pin_1") (pintype "passive") (tstamp 503d1100-49a6-4666-b224-f611ebd24248)) + (net 221 "/Control on separate board/CW_RING") (pinfunction "Pin_1") (pintype "passive") (tstamp 503d1100-49a6-4666-b224-f611ebd24248)) (pad "2" smd roundrect (at -3.125 2.4 180) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 227 "/Control on separate board/CW_TIP") (pinfunction "Pin_2") (pintype "passive") (tstamp 9ce647a0-cf5a-4ca7-b878-802f48e1c41d)) + (net 220 "/Control on separate board/CW_TIP") (pinfunction "Pin_2") (pintype "passive") (tstamp 9ce647a0-cf5a-4ca7-b878-802f48e1c41d)) (pad "3" smd roundrect (at -1.875 2.4 180) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 229 "/Control on separate board/CW_KEYn") (pinfunction "Pin_3") (pintype "passive") (tstamp f611d167-020b-429c-a697-702e7dbae2f0)) + (net 222 "/Control on separate board/CW_KEYn") (pinfunction "Pin_3") (pintype "passive") (tstamp f611d167-020b-429c-a697-702e7dbae2f0)) (pad "4" smd roundrect (at -0.625 2.4 180) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 230 "/Control on separate board/MIC_PTTn") (pinfunction "Pin_4") (pintype "passive") (tstamp 4c567d18-fee0-43b4-8ae0-fd9259371933)) + (net 223 "/Control on separate board/MIC_PTTn") (pinfunction "Pin_4") (pintype "passive") (tstamp 4c567d18-fee0-43b4-8ae0-fd9259371933)) (pad "5" smd roundrect (at 0.625 2.4 180) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 231 "/Control on separate board/EN_TX") (pinfunction "Pin_5") (pintype "passive") (tstamp 721eec1c-2c7a-4f66-98af-51ea9feab969)) + (net 224 "/Control on separate board/EN_TX") (pinfunction "Pin_5") (pintype "passive") (tstamp 721eec1c-2c7a-4f66-98af-51ea9feab969)) (pad "6" smd roundrect (at 1.875 2.4 180) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 232 "/Control on separate board/EN_RX") (pinfunction "Pin_6") (pintype "passive") (tstamp 7cf802dd-64ce-4a6b-9e1f-110468e8f426)) + (net 225 "/Control on separate board/EN_RX") (pinfunction "Pin_6") (pintype "passive") (tstamp 7cf802dd-64ce-4a6b-9e1f-110468e8f426)) (pad "7" smd roundrect (at 3.125 2.4 180) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 166 "/Control on separate board/5V") (pinfunction "Pin_7") (pintype "passive") (tstamp cc52e3c4-e895-46f8-a7c7-c4618f6c2bd7)) + (net 160 "/Control on separate board/5V") (pinfunction "Pin_7") (pintype "passive") (tstamp cc52e3c4-e895-46f8-a7c7-c4618f6c2bd7)) (pad "8" smd roundrect (at 4.375 2.4 180) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "Pin_8") (pintype "passive") (tstamp 2c5602f9-5278-4026-b43c-0ac2d7eff891)) (pad "MP" smd roundrect (at -6.925 -0.5 180) (size 2.1 3) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.119048) (tstamp 2a334310-15d5-4cf4-abb3-226ae00ed0c5)) @@ -25642,9 +25692,9 @@ (fp_line (start 0.8 0.4125) (end 0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp af8921d3-d980-4e22-ae57-b791d1d74dc6)) (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp b6ac4147-1b65-424a-915d-989ce72a5780)) (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 0ace6195-adff-4dc8-81ea-068ea7571686)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 0ace6195-adff-4dc8-81ea-068ea7571686)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 341 "/Control on separate board/BOOT0") (pintype "passive") (tstamp 55284797-3bc4-4ecd-872f-b4c5866ab617)) + (net 330 "/Control on separate board/BOOT0") (pintype "passive") (tstamp 55284797-3bc4-4ecd-872f-b4c5866ab617)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -25687,7 +25737,7 @@ (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 4d23fbc9-a539-4a18-9fd6-b44422dc3f28)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 341 "/Control on separate board/BOOT0") (pintype "passive") (tstamp 98aa8634-2cb3-43a2-ada2-04829826c356)) + (net 330 "/Control on separate board/BOOT0") (pintype "passive") (tstamp 98aa8634-2cb3-43a2-ada2-04829826c356)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -25730,7 +25780,7 @@ (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp dd9c02be-6222-41ed-89d0-957e74b7ba2b)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 274 "Net-(J34-Pad4)") (pintype "passive") (tstamp 2d78cb80-dd1e-4a8c-a7b6-035b8770ced4)) + (net 265 "Net-(J34-Pad4)") (pintype "passive") (tstamp 2d78cb80-dd1e-4a8c-a7b6-035b8770ced4)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -25773,7 +25823,7 @@ (fp_line (start -1.6 -1.25) (end -1.6 1.25) (layer "B.Fab") (width 0.1) (tstamp 342f239a-a8c3-484b-a7c8-41a9d504659f)) (fp_line (start 1.6 1.25) (end 1.6 -1.25) (layer "B.Fab") (width 0.1) (tstamp e818120d-f43d-43d0-8ce1-53426e320f18)) (pad "1" smd roundrect (at -1.5625 0) (size 1.325 2.7) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) - (net 357 "Net-(C38-Pad1)") (pintype "passive") (tstamp cc74fd1f-2fb0-4c47-a4d1-fbef72be2625)) + (net 345 "Net-(C38-Pad1)") (pintype "passive") (tstamp cc74fd1f-2fb0-4c47-a4d1-fbef72be2625)) (pad "2" smd roundrect (at 1.5625 0) (size 1.325 2.7) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) (net 2 "GND") (pintype "passive") (tstamp e07a847e-83a9-418f-99ac-5d70184b8089)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" @@ -25818,7 +25868,109 @@ (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) (net 26 "Net-(C22-Pad1)") (pintype "passive") (tstamp 17cb7edd-5118-4255-8b05-502c5830e30b)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 226 "/Baseband/SPKR_DET") (pintype "passive") (tstamp a2d29762-7817-4472-a78a-0d664602f4fb)) + (net 219 "/Baseband/SPKR_DET") (pintype "passive") (tstamp a2d29762-7817-4472-a78a-0d664602f4fb)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" (layer "B.Cu") + (tedit 5D9F72B1) (tstamp 6ea4f638-99aa-4c1f-950e-3b9445240cef) + (at 131.445 44.069) + (descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") + (tags "SOIC SO") + (property "MPN" "IRF7309TRPBF") + (property "Need_order" "0") + (property "Sheetfile" "pa_70.kicad_sch") + (property "Sheetname" "PA 70MHz") + (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/2f00fa5d-a893-47cc-913a-33720bf0360e") + (attr smd) + (fp_text reference "Q30" (at 0 3.4) (layer "B.SilkS") + (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) + (tstamp 87830a2c-2004-43c9-a4f9-890ee049a2f9) + ) + (fp_text value "IRF7309" (at 0 -3.4) (layer "B.Fab") + (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) + (tstamp a23a78fe-2e71-4a66-87e7-3db188b0235f) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "B.Fab") + (effects (font (size 0.98 0.98) (thickness 0.15)) (justify mirror)) + (tstamp 6fd585b3-4a97-4995-a8e3-913344d43194) + ) + (fp_line (start 0 -2.56) (end -1.95 -2.56) (layer "B.SilkS") (width 0.12) (tstamp 25861221-ea56-4f37-a39a-62571ac4be80)) + (fp_line (start 0 2.56) (end -3.45 2.56) (layer "B.SilkS") (width 0.12) (tstamp 2ae1d34b-248f-480a-8c56-d0cb953bfd8a)) + (fp_line (start 0 2.56) (end 1.95 2.56) (layer "B.SilkS") (width 0.12) (tstamp cc5e8344-2a0e-4f75-83e2-bd2e7dd7ee1a)) + (fp_line (start 0 -2.56) (end 1.95 -2.56) (layer "B.SilkS") (width 0.12) (tstamp e2971a5d-9520-4a20-b95f-cf544fff86a4)) + (fp_line (start -3.7 -2.7) (end 3.7 -2.7) (layer "B.CrtYd") (width 0.05) (tstamp 1fff52d0-39a1-4516-a0da-51da83dfcf6d)) + (fp_line (start 3.7 2.7) (end -3.7 2.7) (layer "B.CrtYd") (width 0.05) (tstamp 911503d9-0e11-421f-9666-42fed80432c0)) + (fp_line (start -3.7 2.7) (end -3.7 -2.7) (layer "B.CrtYd") (width 0.05) (tstamp d23fcb0b-234a-487f-9c09-e65e4f280cb7)) + (fp_line (start 3.7 -2.7) (end 3.7 2.7) (layer "B.CrtYd") (width 0.05) (tstamp f3119af0-9a99-46ea-8c10-8432ec2b9d27)) + (fp_line (start 1.95 -2.45) (end -1.95 -2.45) (layer "B.Fab") (width 0.1) (tstamp 04b95058-68b5-4cf8-9d09-346ddc024b74)) + (fp_line (start -1.95 1.475) (end -0.975 2.45) (layer "B.Fab") (width 0.1) (tstamp 2647d72a-18a9-4100-9397-fd4d72bc1947)) + (fp_line (start -0.975 2.45) (end 1.95 2.45) (layer "B.Fab") (width 0.1) (tstamp 7184d2ed-5ef9-4498-9bc8-c0e1bff6c92a)) + (fp_line (start 1.95 2.45) (end 1.95 -2.45) (layer "B.Fab") (width 0.1) (tstamp 956e6c07-6756-4b35-bf95-7ce7b5e4e0e1)) + (fp_line (start -1.95 -2.45) (end -1.95 1.475) (layer "B.Fab") (width 0.1) (tstamp e33bb2ef-9634-4018-bdfc-4d13bc1a6dc3)) + (pad "1" smd roundrect (at -2.475 1.905) (size 1.95 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) + (net 2 "GND") (pinfunction "S") (pintype "passive") (tstamp 4e8b7086-e230-4068-b1b8-bc26b2bace6d)) + (pad "2" smd roundrect (at -2.475 0.635) (size 1.95 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) + (net 233 "/EN_VTX") (pinfunction "G") (pintype "input") (tstamp 758559d6-b732-4cba-a3e9-5a1a85ae0c09)) + (pad "3" smd roundrect (at -2.475 -0.635) (size 1.95 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) + (net 1 "+12V") (pinfunction "1") (pintype "passive") (tstamp 45293af2-ce57-4af4-9ef2-50292a4af267)) + (pad "4" smd roundrect (at -2.475 -1.905) (size 1.95 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) + (net 297 "Net-(Q30-Pad4)") (pinfunction "G") (pintype "input") (tstamp 4f98e5f0-0410-410c-9078-1bcf9a64a49c)) + (pad "5" smd roundrect (at 2.475 -1.905) (size 1.95 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) + (net 237 "Net-(Q30-Pad5)") (pinfunction "D") (pintype "passive") (tstamp fae91440-3a3e-4140-8d27-bc4e347625b0)) + (pad "6" smd roundrect (at 2.475 -0.635) (size 1.95 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) + (net 237 "Net-(Q30-Pad5)") (pinfunction "D") (pintype "passive") (tstamp ed940257-c3d7-4894-99bf-b6167f7289eb)) + (pad "7" smd roundrect (at 2.475 0.635) (size 1.95 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) + (net 297 "Net-(Q30-Pad4)") (pinfunction "D") (pintype "passive") (tstamp bea76b18-bd68-405d-a33c-fedd9cde0140)) + (pad "8" smd roundrect (at 2.475 1.905) (size 1.95 0.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) + (net 297 "Net-(Q30-Pad4)") (pinfunction "D") (pintype "passive") (tstamp 39f8213b-b0be-445e-875e-bb44b6bd5525)) + (model "${KICAD6_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "B.Cu") + (tedit 5F68FEEE) (tstamp 7335f41f-5d03-45ca-9ee2-39af3facabc3) + (at 126.873 42.9495 90) + (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor handsolder") + (property "Need_order" "0") + (property "Sheetfile" "pa_70.kicad_sch") + (property "Sheetname" "PA 70MHz") + (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/d4212123-0342-480c-b986-6eb3c720f63a") + (attr smd) + (fp_text reference "R154" (at 0 1.43 90) (layer "B.SilkS") + (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) + (tstamp 66e4083d-4bc0-44ef-9b6f-8cab58425ba0) + ) + (fp_text value "12k" (at 0 -1.43 90) (layer "B.Fab") + (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) + (tstamp 7d80416d-02db-48ab-80c1-6c08afedadee) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "B.Fab") + (effects (font (size 0.4 0.4) (thickness 0.06)) (justify mirror)) + (tstamp a3e0512c-9d42-491d-a96a-36b2ba4b4798) + ) + (fp_line (start -0.254724 -0.5225) (end 0.254724 -0.5225) (layer "B.SilkS") (width 0.12) (tstamp 361d881c-e33c-4a7b-83dd-40d7faedd61b)) + (fp_line (start -0.254724 0.5225) (end 0.254724 0.5225) (layer "B.SilkS") (width 0.12) (tstamp 88a45417-5349-456d-99e0-5347607f9d80)) + (fp_line (start -1.65 -0.73) (end -1.65 0.73) (layer "B.CrtYd") (width 0.05) (tstamp 45832468-a7e9-4ba0-aa8e-c0c6cd177d10)) + (fp_line (start 1.65 0.73) (end 1.65 -0.73) (layer "B.CrtYd") (width 0.05) (tstamp 4c5757c9-a623-4a32-b052-0c235e62097c)) + (fp_line (start 1.65 -0.73) (end -1.65 -0.73) (layer "B.CrtYd") (width 0.05) (tstamp 8ef08f04-b808-4084-b76f-d437a30c7a81)) + (fp_line (start -1.65 0.73) (end 1.65 0.73) (layer "B.CrtYd") (width 0.05) (tstamp d5501adc-dbf5-4295-b4ce-46cf54a46073)) + (fp_line (start -0.8 0.4125) (end 0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp 35e674f8-0315-4380-b564-19b437ac24a7)) + (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp 61cf6f2c-9cf0-4d98-9681-c2c4ba40fabf)) + (fp_line (start 0.8 0.4125) (end 0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp 6eab9cbc-0b19-4a5d-a0b4-d5e5f5a7e649)) + (fp_line (start -0.8 -0.4125) (end -0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp 846ff0fe-b2d3-44c2-bd24-854c3df26c08)) + (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) + (net 1 "+12V") (pintype "passive") (tstamp 2c79c5b2-fcdd-4af5-8ffc-0cffb51511a6)) + (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) + (net 297 "Net-(Q30-Pad4)") (pintype "passive") (tstamp a61da465-f15f-447b-8281-d3af4253eac2)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -25859,9 +26011,9 @@ (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp a1fc3ffa-c5f8-4ace-a03c-486c071f601f)) (fp_line (start -0.8 -0.4125) (end -0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp d42b951c-a1fc-4355-8e25-ef20e745925b)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp fdefab12-8a0d-4592-9d9c-de2bce3ed207)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp fdefab12-8a0d-4592-9d9c-de2bce3ed207)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 262 "/Control on separate board/I2C2_SDA") (pintype "passive") (tstamp bb2508b5-c159-4c62-9228-b8f0322d03e7)) + (net 253 "/Control on separate board/I2C2_SDA") (pintype "passive") (tstamp bb2508b5-c159-4c62-9228-b8f0322d03e7)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -25998,9 +26150,9 @@ (fp_line (start -0.8 -0.4125) (end -0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp a90eedab-3dce-49b0-87b3-9bee9db3a590)) (fp_line (start -0.8 0.4125) (end 0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp d00824fa-79d5-4dcd-a2c5-298bf2822471)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 272 "/Control on separate board/USB_DM") (pintype "passive") (tstamp 2b978ec8-2005-4682-8432-cfd2d05a1871)) + (net 263 "/Control on separate board/USB_DM") (pintype "passive") (tstamp 2b978ec8-2005-4682-8432-cfd2d05a1871)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 339 "Net-(R179-Pad2)") (pintype "passive") (tstamp 84f5c193-1090-4ed5-91b5-4ab7b616d804)) + (net 328 "Net-(R179-Pad2)") (pintype "passive") (tstamp 84f5c193-1090-4ed5-91b5-4ab7b616d804)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -26042,9 +26194,9 @@ (fp_line (start 0.8 0.4125) (end 0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp a6da8a9d-4bac-4f37-b7b4-abb528a73ea2)) (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp dedb249c-3cf4-4497-ba03-daed44317eaf)) (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 356 "/Baseband/3V3_MIC") (pintype "passive") (tstamp c9fa5ad0-5b34-4a81-aa53-2c6a0aa46980)) + (net 344 "/Baseband/3V3_MIC") (pintype "passive") (tstamp c9fa5ad0-5b34-4a81-aa53-2c6a0aa46980)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 308 "Net-(R22-Pad2)") (pintype "passive") (tstamp accf9450-59e1-441e-99d0-22f16dbac243)) + (net 298 "Net-(R22-Pad2)") (pintype "passive") (tstamp accf9450-59e1-441e-99d0-22f16dbac243)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -26087,7 +26239,7 @@ (fp_line (start 1.6 1.25) (end 1.6 -1.25) (layer "B.Fab") (width 0.1) (tstamp ef862f69-7866-47ca-bd9b-55cad09df632)) (fp_line (start -1.6 -1.25) (end -1.6 1.25) (layer "B.Fab") (width 0.1) (tstamp f491bae5-1dba-4daa-814a-6b7201493561)) (pad "1" smd roundrect (at -1.5625 0 270) (size 1.325 2.7) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) - (net 356 "/Baseband/3V3_MIC") (pintype "passive") (tstamp 5ec68308-b062-4169-968a-7b8cecfcf12f)) + (net 344 "/Baseband/3V3_MIC") (pintype "passive") (tstamp 5ec68308-b062-4169-968a-7b8cecfcf12f)) (pad "2" smd roundrect (at 1.5625 0 270) (size 1.325 2.7) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) (net 2 "GND") (pintype "passive") (tstamp 542ba545-a57d-4b6d-9abe-73581614b26b)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" @@ -26130,9 +26282,9 @@ (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp 9bfbaa56-c582-484d-834c-ae9625da7762)) (fp_line (start 0.8 0.4125) (end 0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp bc5e7735-c879-4966-b5d6-6ca558ca24ce)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 263c4cd1-7271-4c3e-96a4-cc071a63b792)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 263c4cd1-7271-4c3e-96a4-cc071a63b792)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 193 "Net-(D23-Pad2)") (pintype "passive") (tstamp 3346ee85-4711-428e-8a8d-e83fd6c96bae)) + (net 187 "Net-(D23-Pad2)") (pintype "passive") (tstamp 3346ee85-4711-428e-8a8d-e83fd6c96bae)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -26173,9 +26325,9 @@ (fp_line (start 0.8 0.4125) (end 0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp 49836556-84de-472a-be08-01d33098b4fb)) (fp_line (start -0.8 -0.4125) (end -0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp e93135c2-8dd8-4cdb-9cdf-a3cf7ea0d44c)) (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 327 "Net-(R161-Pad2)") (pintype "passive") (tstamp 3c6c8b4e-6740-4ad1-90e0-f8c2ebce172d)) + (net 316 "Net-(R161-Pad2)") (pintype "passive") (tstamp 3c6c8b4e-6740-4ad1-90e0-f8c2ebce172d)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp feb62051-25da-4fa4-a645-924412ff1b67)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp feb62051-25da-4fa4-a645-924412ff1b67)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -26218,7 +26370,7 @@ (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pintype "passive") (tstamp 6b475309-4ada-49d2-9355-39c370cc28ba)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 342 "/Control on separate board/BOOT1") (pintype "passive") (tstamp 11bf9e6b-52c6-4290-bc88-0de8cf981747)) + (net 331 "/Control on separate board/BOOT1") (pintype "passive") (tstamp 11bf9e6b-52c6-4290-bc88-0de8cf981747)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -26276,13 +26428,13 @@ (fp_line (start 3.75 -3.3875) (end 3.75 1.6125) (layer "B.Fab") (width 0.1) (tstamp a68b91fb-9a1b-4819-967f-4f7817665a5d)) (fp_line (start -3.75 -3.389204) (end 3.75 -3.389204) (layer "B.Fab") (width 0.1) (tstamp e718059b-4aa5-4e29-b0b8-9e879c06ef99)) (pad "1" smd rect (at -1.3 1.4625 270) (size 0.4 1.35) (layers "B.Cu" "B.Paste" "B.Mask") - (net 271 "unconnected-(J34-Pad1)") (pinfunction "VBUS") (pintype "power_out+no_connect") (tstamp b78e1220-4315-4908-841a-efc36478abeb)) + (net 262 "unconnected-(J34-Pad1)") (pinfunction "VBUS") (pintype "power_out+no_connect") (tstamp b78e1220-4315-4908-841a-efc36478abeb)) (pad "2" smd rect (at -0.65 1.4625 270) (size 0.4 1.35) (layers "B.Cu" "B.Paste" "B.Mask") - (net 272 "/Control on separate board/USB_DM") (pinfunction "D-") (pintype "bidirectional") (tstamp 42d3be3e-6c4f-44ed-a346-ad5cfff92b6c)) + (net 263 "/Control on separate board/USB_DM") (pinfunction "D-") (pintype "bidirectional") (tstamp 42d3be3e-6c4f-44ed-a346-ad5cfff92b6c)) (pad "3" smd rect (at 0 1.4625 270) (size 0.4 1.35) (layers "B.Cu" "B.Paste" "B.Mask") - (net 273 "/Control on separate board/USB_DP") (pinfunction "D+") (pintype "bidirectional") (tstamp a38a5420-6651-4d44-9b52-c07d60efbf5f)) + (net 264 "/Control on separate board/USB_DP") (pinfunction "D+") (pintype "bidirectional") (tstamp a38a5420-6651-4d44-9b52-c07d60efbf5f)) (pad "4" smd rect (at 0.65 1.4625 270) (size 0.4 1.35) (layers "B.Cu" "B.Paste" "B.Mask") - (net 274 "Net-(J34-Pad4)") (pinfunction "ID") (pintype "passive") (tstamp e62c803a-79c1-4425-a887-e86d35cf295f)) + (net 265 "Net-(J34-Pad4)") (pinfunction "ID") (pintype "passive") (tstamp e62c803a-79c1-4425-a887-e86d35cf295f)) (pad "5" smd rect (at 1.3 1.4625 270) (size 0.4 1.35) (layers "B.Cu" "B.Paste" "B.Mask") (net 2 "GND") (pinfunction "GND") (pintype "power_out") (tstamp 2eae70e1-0eb3-46d8-aeb1-1475e8c7a6be)) (pad "6" smd rect (at 2.9 -1.2375 270) (size 1.2 1.9) (layers "B.Cu" "B.Mask") @@ -26363,19 +26515,19 @@ (fp_line (start -5.875 0.6) (end -7.375 0.6) (layer "B.Fab") (width 0.1) (tstamp e16a6087-4560-48ae-8b6c-124cf76bcf51)) (fp_line (start -7.375 -1.6) (end -7.375 -2.2) (layer "B.Fab") (width 0.1) (tstamp f2aea69f-0a9d-4755-ad1e-e843a5c12eed)) (pad "1" smd roundrect (at -4.375 2.4 180) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 233 "/Control on separate board/S_METER") (pinfunction "Pin_1") (pintype "passive") (tstamp 18863fc6-d859-4895-be2a-12a948b1278e)) + (net 226 "/Control on separate board/S_METER") (pinfunction "Pin_1") (pintype "passive") (tstamp 18863fc6-d859-4895-be2a-12a948b1278e)) (pad "2" smd roundrect (at -3.125 2.4 180) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 234 "/Control on separate board/SCL") (pinfunction "Pin_2") (pintype "passive") (tstamp 82fea5be-9e6f-4d56-89b0-856536646ead)) + (net 227 "/Control on separate board/SCL") (pinfunction "Pin_2") (pintype "passive") (tstamp 82fea5be-9e6f-4d56-89b0-856536646ead)) (pad "3" smd roundrect (at -1.875 2.4 180) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 235 "/Control on separate board/SDA") (pinfunction "Pin_3") (pintype "passive") (tstamp acc3825f-9306-426f-995e-bcac4721f995)) + (net 228 "/Control on separate board/SDA") (pinfunction "Pin_3") (pintype "passive") (tstamp acc3825f-9306-426f-995e-bcac4721f995)) (pad "4" smd roundrect (at -0.625 2.4 180) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 236 "/Control on separate board/MUTE_MICn") (pinfunction "Pin_4") (pintype "passive") (tstamp 5e0f2277-f08e-4510-abc2-ed48e78edc8a)) + (net 229 "/Control on separate board/MUTE_MICn") (pinfunction "Pin_4") (pintype "passive") (tstamp 5e0f2277-f08e-4510-abc2-ed48e78edc8a)) (pad "5" smd roundrect (at 0.625 2.4 180) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 237 "/Control on separate board/SPKR_VOL") (pinfunction "Pin_5") (pintype "passive") (tstamp 94024489-0196-47c9-a519-e33f52a0f566)) + (net 230 "/Control on separate board/SPKR_VOL") (pinfunction "Pin_5") (pintype "passive") (tstamp 94024489-0196-47c9-a519-e33f52a0f566)) (pad "6" smd roundrect (at 1.875 2.4 180) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 149 "/Control on separate board/GPIO_PA4") (pinfunction "Pin_6") (pintype "passive") (tstamp 576dd4d0-7e3a-4e80-9bd4-21f0cb7ee79b)) + (net 146 "/Control on separate board/GPIO_PA4") (pinfunction "Pin_6") (pintype "passive") (tstamp 576dd4d0-7e3a-4e80-9bd4-21f0cb7ee79b)) (pad "7" smd roundrect (at 3.125 2.4 180) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 164 "/Control on separate board/CW_TONE") (pinfunction "Pin_7") (pintype "passive") (tstamp 1876b23e-d200-4a9e-8a5b-976ca601e24e)) + (net 158 "/Control on separate board/CW_TONE") (pinfunction "Pin_7") (pintype "passive") (tstamp 1876b23e-d200-4a9e-8a5b-976ca601e24e)) (pad "8" smd roundrect (at 4.375 2.4 180) (size 0.8 1.6) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) (net 2 "GND") (pinfunction "Pin_8") (pintype "passive") (tstamp 6a54fd2e-9bc2-4ce3-b843-66e0c1b7c472)) (pad "MP" smd roundrect (at -6.925 -0.5 180) (size 2.1 3) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.119048) (tstamp 3f5943d9-2bb3-4538-8b96-17f819633377)) @@ -26423,7 +26575,7 @@ (pad "1" smd roundrect (at -1.1625 0) (size 1.425 2.2) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.175439) (net 2 "GND") (pinfunction "1") (pintype "passive") (tstamp 466e9ea1-153c-429c-859b-b61eafbec2b3)) (pad "2" smd roundrect (at 1.1625 0) (size 1.425 2.2) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.175439) - (net 178 "Net-(D11-Pad3)") (pinfunction "2") (pintype "passive") (tstamp 7fff1b16-c00a-4a0a-94ef-83cfa62898b6)) + (net 172 "Net-(D11-Pad3)") (pinfunction "2") (pintype "passive") (tstamp 7fff1b16-c00a-4a0a-94ef-83cfa62898b6)) (model "${KICAD6_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -26464,9 +26616,9 @@ (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp d0e08118-a6e8-437f-9bb5-163838e5e109)) (fp_line (start -0.8 -0.4125) (end -0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp fa484cf5-b04b-4ada-bb1c-9609da6e2faf)) (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 165 "Net-(C176-Pad1)") (pintype "passive") (tstamp f7b937b8-f2f3-4b46-b1f1-f999757a4773)) + (net 159 "Net-(C176-Pad1)") (pintype "passive") (tstamp f7b937b8-f2f3-4b46-b1f1-f999757a4773)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 337 "/Control on separate board/MUTE_SPKR") (pintype "passive") (tstamp 928c8d07-894b-4254-a6c6-e74e0497ab04)) + (net 326 "/Control on separate board/MUTE_SPKR") (pintype "passive") (tstamp 928c8d07-894b-4254-a6c6-e74e0497ab04)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -26550,9 +26702,9 @@ (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp be17a17a-8460-44b5-8b21-ee5259c7aef3)) (fp_line (start -0.8 0.4125) (end 0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp fdff07b7-8064-45e0-aa7c-faae8f276194)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 292e4eba-a6a4-42a0-ad0d-431a65177255)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 292e4eba-a6a4-42a0-ad0d-431a65177255)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 277 "/Control on separate board/RESETn") (pintype "passive") (tstamp 71180ae9-614a-4911-af39-0b828a27743b)) + (net 268 "/Control on separate board/RESETn") (pintype "passive") (tstamp 71180ae9-614a-4911-af39-0b828a27743b)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -26599,9 +26751,9 @@ (pad "1" smd rect (at -3.15 2.3 180) (size 2 1.5) (layers "B.Cu" "B.Paste" "B.Mask") (net 2 "GND") (pinfunction "GND") (pintype "power_in") (tstamp 5855cd0a-1c31-48ff-afba-33ee10e620c8)) (pad "2" smd rect (at -3.15 0 180) (size 2 1.5) (layers "B.Cu" "B.Paste" "B.Mask") - (net 350 "/+3V3_CLK") (pinfunction "VO") (pintype "power_out") (tstamp 4aceed2b-555d-4a4d-b98a-605c6eb7a2c7)) + (net 339 "/+3V3_CLK") (pinfunction "VO") (pintype "power_out") (tstamp 4aceed2b-555d-4a4d-b98a-605c6eb7a2c7)) (pad "2" smd rect (at 3.15 0 180) (size 2 3.8) (layers "B.Cu" "B.Paste" "B.Mask") - (net 350 "/+3V3_CLK") (pinfunction "VO") (pintype "power_out") (tstamp f7136a3e-3864-43b0-927c-9f78419dfdb6)) + (net 339 "/+3V3_CLK") (pinfunction "VO") (pintype "power_out") (tstamp f7136a3e-3864-43b0-927c-9f78419dfdb6)) (pad "3" smd rect (at -3.15 -2.3 180) (size 2 1.5) (layers "B.Cu" "B.Paste" "B.Mask") (net 1 "+12V") (pinfunction "VI") (pintype "power_in") (tstamp 6b6ae245-792e-45c8-94fd-96521e422a7c)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-223.wrl" @@ -26789,9 +26941,9 @@ (fp_line (start -0.8 -0.4125) (end -0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp c0467bdd-8775-4e0b-a2ea-83189329ecb4)) (fp_line (start 0.8 0.4125) (end 0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp dea2972c-a978-4009-b2c2-859d2267ede4)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 158 "/Control on separate board/ENC_A") (pintype "passive") (tstamp 7cbbf9d0-63cc-4be5-ba2f-44fc91681e4f)) + (net 152 "/Control on separate board/ENC_A") (pintype "passive") (tstamp 7cbbf9d0-63cc-4be5-ba2f-44fc91681e4f)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 327 "Net-(R161-Pad2)") (pintype "passive") (tstamp ba822cff-a278-436e-9733-db3138984e81)) + (net 316 "Net-(R161-Pad2)") (pintype "passive") (tstamp ba822cff-a278-436e-9733-db3138984e81)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -26838,11 +26990,11 @@ (pad "1" smd rect (at -3.15 2.3 180) (size 2 1.5) (layers "B.Cu" "B.Paste" "B.Mask") (net 2 "GND") (pinfunction "GND") (pintype "power_in") (tstamp 3502c788-1e63-48a7-a58b-3ba9b328987a)) (pad "2" smd rect (at -3.15 0 180) (size 2 1.5) (layers "B.Cu" "B.Paste" "B.Mask") - (net 159 "/Control on separate board/3.3V_UI") (pinfunction "VO") (pintype "power_out") (tstamp ddc9ad72-833b-4ac1-a47a-2f447bd4d728)) + (net 153 "/Control on separate board/3.3V_UI") (pinfunction "VO") (pintype "power_out") (tstamp ddc9ad72-833b-4ac1-a47a-2f447bd4d728)) (pad "2" smd rect (at 3.15 0 180) (size 2 3.8) (layers "B.Cu" "B.Paste" "B.Mask") - (net 159 "/Control on separate board/3.3V_UI") (pinfunction "VO") (pintype "power_out") (tstamp f43b154d-441f-4fb0-a37e-8df780cddf0d)) + (net 153 "/Control on separate board/3.3V_UI") (pinfunction "VO") (pintype "power_out") (tstamp f43b154d-441f-4fb0-a37e-8df780cddf0d)) (pad "3" smd rect (at -3.15 -2.3 180) (size 2 1.5) (layers "B.Cu" "B.Paste" "B.Mask") - (net 166 "/Control on separate board/5V") (pinfunction "VI") (pintype "power_in") (tstamp c17071c5-fb83-4a59-b4b6-36aa9e28703e)) + (net 160 "/Control on separate board/5V") (pinfunction "VI") (pintype "power_in") (tstamp c17071c5-fb83-4a59-b4b6-36aa9e28703e)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-223.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -26850,6 +27002,50 @@ ) ) + (footprint "Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder" (layer "B.Cu") + (tedit 5F68FEEF) (tstamp b1841d2e-8062-4d03-a976-d7d562714049) + (at 124.714 53.086 90) + (descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor handsolder") + (property "MPN" "TAJA106K016RNJ") + (property "Need_order" "0") + (property "Sheetfile" "pa_70.kicad_sch") + (property "Sheetname" "PA 70MHz") + (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-0000606170c9") + (attr smd) + (fp_text reference "C154" (at 0 1.85 90) (layer "B.SilkS") + (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) + (tstamp 1e9684d8-fa66-4be7-860f-c95ba76b26dd) + ) + (fp_text value "10uF" (at 0 -1.85 90) (layer "B.Fab") + (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) + (tstamp cf7ec534-c049-45ed-adfa-cfbfa2b75031) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "B.Fab") + (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) + (tstamp d9f60349-b8ff-4b19-ab57-8866dda2d79a) + ) + (fp_line (start -0.711252 -0.91) (end 0.711252 -0.91) (layer "B.SilkS") (width 0.12) (tstamp dab37661-c08e-4d41-a10e-16823aa1a426)) + (fp_line (start -0.711252 0.91) (end 0.711252 0.91) (layer "B.SilkS") (width 0.12) (tstamp e3f5233c-9820-4bac-9986-377b9f53ad09)) + (fp_line (start 2.48 1.15) (end 2.48 -1.15) (layer "B.CrtYd") (width 0.05) (tstamp 4bab64ae-43d5-4092-be05-d47099fb97d3)) + (fp_line (start -2.48 1.15) (end 2.48 1.15) (layer "B.CrtYd") (width 0.05) (tstamp 6f0ccc9f-1169-4c7a-b49e-1b302fcc077c)) + (fp_line (start 2.48 -1.15) (end -2.48 -1.15) (layer "B.CrtYd") (width 0.05) (tstamp 912710b4-edcb-42af-91ec-a2e9fd1e065c)) + (fp_line (start -2.48 -1.15) (end -2.48 1.15) (layer "B.CrtYd") (width 0.05) (tstamp e759374d-dbf0-4ea6-9ae5-b396ec8176f4)) + (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer "B.Fab") (width 0.1) (tstamp 3e250fe8-fc49-4c59-bad6-026684f719f5)) + (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer "B.Fab") (width 0.1) (tstamp 518f63ae-9588-40b6-ba5e-0e1519ec6478)) + (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer "B.Fab") (width 0.1) (tstamp 59276105-be6f-4a7c-9e26-c3e5ed5394ab)) + (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer "B.Fab") (width 0.1) (tstamp 9f292357-496b-4088-b8bd-0812cac76f87)) + (pad "1" smd roundrect (at -1.5625 0 90) (size 1.325 1.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) + (net 362 "Net-(C154-Pad1)") (pintype "passive") (tstamp ec4ce95b-bf8c-4040-8eb4-5222a4e2ce02)) + (pad "2" smd roundrect (at 1.5625 0 90) (size 1.325 1.8) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) + (net 2 "GND") (pintype "passive") (tstamp 974c2bae-ec8e-4086-8f02-826b01ac193d)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1206_3216Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + (footprint "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (layer "B.Cu") (tedit 5F68FEEE) (tstamp b3a0729c-fbb8-4170-aae7-cd9eae94aaff) (at 187.96 148.61 90) @@ -26883,9 +27079,9 @@ (fp_line (start -0.8 0.4125) (end 0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp 36942ba9-0281-4dca-9f30-3eab0ebd0623)) (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp 4a771680-537d-4e65-862f-afffbeb0c40c)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 332 "Net-(R168-Pad1)") (pintype "passive") (tstamp 54805a01-2c21-44ec-b5fb-c08cf88f5637)) + (net 321 "Net-(R168-Pad1)") (pintype "passive") (tstamp 54805a01-2c21-44ec-b5fb-c08cf88f5637)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 333 "/Control on separate board/ENC_BTN") (pintype "passive") (tstamp 9b624be2-91ce-4bff-98c9-698d6dcbeef3)) + (net 322 "/Control on separate board/ENC_BTN") (pintype "passive") (tstamp 9b624be2-91ce-4bff-98c9-698d6dcbeef3)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -26926,9 +27122,9 @@ (fp_line (start -0.8 -0.4125) (end -0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp f798f125-ec21-423b-b562-aaf0cb028ff3)) (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp fc63efc6-6ba2-4bb7-a135-191786e5ba81)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 328 "/Control on separate board/BTN0") (pintype "passive") (tstamp c9adb598-2c9e-4820-a1ba-93e10d76ed65)) + (net 317 "/Control on separate board/BTN0") (pintype "passive") (tstamp c9adb598-2c9e-4820-a1ba-93e10d76ed65)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 54c38852-39cb-48b7-b7eb-4a24e09c8ff2)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp 54c38852-39cb-48b7-b7eb-4a24e09c8ff2)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -26969,9 +27165,9 @@ (fp_line (start 0.8 0.4125) (end 0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp 7e94615f-fe03-4d40-bce6-26e0e0a7c6ae)) (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp e8ff52a3-e513-4bf8-bc84-b9c4a91c1cb3)) (pad "1" smd roundrect (at -0.9125 0 270) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 237 "/Control on separate board/SPKR_VOL") (pintype "passive") (tstamp 4fb77e23-2721-428c-a166-21eb998708b1)) + (net 230 "/Control on separate board/SPKR_VOL") (pintype "passive") (tstamp 4fb77e23-2721-428c-a166-21eb998708b1)) (pad "2" smd roundrect (at 0.9125 0 270) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 338 "Net-(R178-Pad2)") (pintype "passive") (tstamp 46c2ea7b-106d-4bfc-8b4f-bec7e7e2a930)) + (net 327 "Net-(R178-Pad2)") (pintype "passive") (tstamp 46c2ea7b-106d-4bfc-8b4f-bec7e7e2a930)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -27099,7 +27295,7 @@ (fp_line (start -0.8 -0.4125) (end -0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp c674685d-0afa-4047-b736-72883f8329b3)) (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp c7eb18ad-48f2-4cd2-b45c-907379625ddd)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 290 "Net-(Q6-Pad1)") (pintype "passive") (tstamp 833adf48-9087-4e39-8413-1d1a954a165f)) + (net 281 "Net-(Q6-Pad1)") (pintype "passive") (tstamp 833adf48-9087-4e39-8413-1d1a954a165f)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) (net 36 "Net-(C31-Pad1)") (pintype "passive") (tstamp 89676516-4e53-41bb-bbde-7dd2fce39f26)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" @@ -27142,9 +27338,9 @@ (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp 9ffe816f-0a86-4c54-9551-0a690abd2111)) (fp_line (start -0.8 0.4125) (end 0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp aa2bc417-c302-4edb-b719-b5bcabe8d4f1)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 273 "/Control on separate board/USB_DP") (pintype "passive") (tstamp 6c7760fc-3e73-44a8-bc65-59a27f985226)) + (net 264 "/Control on separate board/USB_DP") (pintype "passive") (tstamp 6c7760fc-3e73-44a8-bc65-59a27f985226)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 340 "Net-(R180-Pad2)") (pintype "passive") (tstamp 6afe6941-a99f-4adb-9f98-3c22f70ffec3)) + (net 329 "Net-(R180-Pad2)") (pintype "passive") (tstamp 6afe6941-a99f-4adb-9f98-3c22f70ffec3)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -27185,9 +27381,9 @@ (fp_line (start 0.8 0.4125) (end 0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp a893ac74-3d4a-4741-acf9-70a70675c847)) (fp_line (start -0.8 0.4125) (end 0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp fbeaa863-c035-4848-93da-36ebfb8a77e8)) (pad "1" smd roundrect (at -0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 226 "/Baseband/SPKR_DET") (pintype "passive") (tstamp a86d067f-ecdd-4704-a2c3-3b8e64f94e8f)) + (net 219 "/Baseband/SPKR_DET") (pintype "passive") (tstamp a86d067f-ecdd-4704-a2c3-3b8e64f94e8f)) (pad "2" smd roundrect (at 0.9125 0 180) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 310 "Net-(R28-Pad2)") (pintype "passive") (tstamp bc2e4482-7d69-497f-ae19-e577ebd0b205)) + (net 300 "Net-(R28-Pad2)") (pintype "passive") (tstamp bc2e4482-7d69-497f-ae19-e577ebd0b205)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -27229,9 +27425,9 @@ (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp db1c393a-23c5-454f-8efe-2b85980f9e20)) (fp_line (start -0.8 -0.4125) (end -0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp dfd7788b-c11c-45a3-bfd0-42888eb84ba7)) (pad "1" smd roundrect (at -0.9125 0) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 356 "/Baseband/3V3_MIC") (pintype "passive") (tstamp 7c88082c-c146-4eb5-9495-83ef11dd183a)) + (net 344 "/Baseband/3V3_MIC") (pintype "passive") (tstamp 7c88082c-c146-4eb5-9495-83ef11dd183a)) (pad "2" smd roundrect (at 0.9125 0) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 309 "Net-(R23-Pad2)") (pintype "passive") (tstamp 3a323a2a-53f2-40db-a10e-c5c8dbbf4f9b)) + (net 299 "Net-(R23-Pad2)") (pintype "passive") (tstamp 3a323a2a-53f2-40db-a10e-c5c8dbbf4f9b)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -27272,9 +27468,9 @@ (fp_line (start -0.8 -0.4125) (end -0.8 0.4125) (layer "B.Fab") (width 0.1) (tstamp 865d1391-9072-48f3-9418-27704d27ae8c)) (fp_line (start 0.8 -0.4125) (end -0.8 -0.4125) (layer "B.Fab") (width 0.1) (tstamp ea882016-f98c-4cb0-8ecf-fa11cbd45d3d)) (pad "1" smd roundrect (at -0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 331 "/Control on separate board/BTN3") (pintype "passive") (tstamp 97d8bfac-39d2-4a1f-a1b2-928db7ca7d92)) + (net 320 "/Control on separate board/BTN3") (pintype "passive") (tstamp 97d8bfac-39d2-4a1f-a1b2-928db7ca7d92)) (pad "2" smd roundrect (at 0.9125 0 90) (size 0.975 0.95) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.25) - (net 159 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp b8d7b325-6364-4769-9d03-bc4eb9aef62e)) + (net 153 "/Control on separate board/3.3V_UI") (pintype "passive") (tstamp b8d7b325-6364-4769-9d03-bc4eb9aef62e)) (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) @@ -27321,9 +27517,9 @@ (pad "1" smd rect (at -3.15 2.3 180) (size 2 1.5) (layers "B.Cu" "B.Paste" "B.Mask") (net 2 "GND") (pinfunction "GND") (pintype "power_in") (tstamp 90eb6392-7973-41f1-9be2-2347da7f379b)) (pad "2" smd rect (at -3.15 0 180) (size 2 1.5) (layers "B.Cu" "B.Paste" "B.Mask") - (net 356 "/Baseband/3V3_MIC") (pinfunction "VO") (pintype "power_out") (tstamp 75a1101f-6cdb-40ef-b434-f5b4481a9b33)) + (net 344 "/Baseband/3V3_MIC") (pinfunction "VO") (pintype "power_out") (tstamp 75a1101f-6cdb-40ef-b434-f5b4481a9b33)) (pad "2" smd rect (at 3.15 0 180) (size 2 3.8) (layers "B.Cu" "B.Paste" "B.Mask") - (net 356 "/Baseband/3V3_MIC") (pinfunction "VO") (pintype "power_out") (tstamp e4700d4e-3e59-4dd3-ba23-b0f82c79dedf)) + (net 344 "/Baseband/3V3_MIC") (pinfunction "VO") (pintype "power_out") (tstamp e4700d4e-3e59-4dd3-ba23-b0f82c79dedf)) (pad "3" smd rect (at -3.15 -2.3 180) (size 2 1.5) (layers "B.Cu" "B.Paste" "B.Mask") (net 1 "+12V") (pinfunction "VI") (pintype "power_in") (tstamp 486b62ad-3a86-4af1-a545-7635da3e0fc9)) (model "${KICAD6_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-223.wrl" @@ -27367,7 +27563,7 @@ (fp_line (start 1 -0.625) (end -1 -0.625) (layer "B.Fab") (width 0.1) (tstamp e983f476-fb53-4802-82f0-4beccf94079a)) (fp_line (start 1 0.625) (end 1 -0.625) (layer "B.Fab") (width 0.1) (tstamp ff9dd614-ba2e-4fb1-a597-e13ea9cf5c41)) (pad "1" smd roundrect (at -1.0375 0 180) (size 1.175 1.45) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.212766) - (net 158 "/Control on separate board/ENC_A") (pintype "passive") (tstamp 2e7c1ee7-1381-4e15-b55a-cf21d5e606c4)) + (net 152 "/Control on separate board/ENC_A") (pintype "passive") (tstamp 2e7c1ee7-1381-4e15-b55a-cf21d5e606c4)) (pad "2" smd roundrect (at 1.0375 0 180) (size 1.175 1.45) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.212766) (net 2 "GND") (pintype "passive") (tstamp fb3f5920-c215-42ee-b707-a6afeab513d6)) (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" @@ -27421,16 +27617,62 @@ ) ) + (footprint "Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder" (layer "B.Cu") + (tedit 5F68FEEF) (tstamp fe252a36-3d2e-4daf-aae7-b62bf6a7a6b5) + (at 124.206 43.942 -90) + (descr "Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "capacitor handsolder") + (property "MPN" "TAJA106K016RNJ") + (property "Need_order" "0") + (property "Sheetfile" "pa_70.kicad_sch") + (property "Sheetname" "PA 70MHz") + (path "/f5953f75-4b48-4b4f-8eb7-dca86201f1bf/00000000-0000-0000-0000-00006061694b") + (attr smd) + (fp_text reference "C152" (at 0 2.3 90) (layer "B.SilkS") + (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) + (tstamp 471157ae-6721-43f2-8eb3-ccfd8874c698) + ) + (fp_text value "10uF" (at 0 -2.3 90) (layer "B.Fab") + (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) + (tstamp eb8150b7-0ae1-4c4a-89cb-058a6dc4e1aa) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "B.Fab") + (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) + (tstamp 224c5ec2-6fdf-46cd-80bd-5026887fefc2) + ) + (fp_line (start -0.711252 1.36) (end 0.711252 1.36) (layer "B.SilkS") (width 0.12) (tstamp 8c7e1ea5-a08d-4b4b-a561-31a10948cc06)) + (fp_line (start -0.711252 -1.36) (end 0.711252 -1.36) (layer "B.SilkS") (width 0.12) (tstamp ffa7985a-9d80-4133-821b-49895067f677)) + (fp_line (start 2.48 1.6) (end 2.48 -1.6) (layer "B.CrtYd") (width 0.05) (tstamp 02082496-c9fc-4d4d-8e65-39ce9cff640b)) + (fp_line (start 2.48 -1.6) (end -2.48 -1.6) (layer "B.CrtYd") (width 0.05) (tstamp 9f474616-10be-4f6d-a428-8e9ee24b8bb4)) + (fp_line (start -2.48 -1.6) (end -2.48 1.6) (layer "B.CrtYd") (width 0.05) (tstamp c333faba-de49-4f57-b216-9458c635bba7)) + (fp_line (start -2.48 1.6) (end 2.48 1.6) (layer "B.CrtYd") (width 0.05) (tstamp eae71c98-a669-411d-996e-99f26fbc1415)) + (fp_line (start -1.6 1.25) (end 1.6 1.25) (layer "B.Fab") (width 0.1) (tstamp 3a81417d-3718-48c8-871a-fc3e7a20608a)) + (fp_line (start 1.6 -1.25) (end -1.6 -1.25) (layer "B.Fab") (width 0.1) (tstamp b56adcec-6cb0-4578-bf75-0c00db1f4fe2)) + (fp_line (start 1.6 1.25) (end 1.6 -1.25) (layer "B.Fab") (width 0.1) (tstamp ec9d2ad6-5c48-4553-997a-e75de66968fe)) + (fp_line (start -1.6 -1.25) (end -1.6 1.25) (layer "B.Fab") (width 0.1) (tstamp f5c61b05-eced-48b0-bd47-2f7b2418d9a6)) + (pad "1" smd roundrect (at -1.5625 0 270) (size 1.325 2.7) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) + (net 1 "+12V") (pintype "passive") (tstamp 1e596b65-d60a-4283-9bc2-5446d2665631)) + (pad "2" smd roundrect (at 1.5625 0 270) (size 1.325 2.7) (layers "B.Cu" "B.Paste" "B.Mask") (roundrect_rratio 0.188679) + (net 2 "GND") (pintype "passive") (tstamp 56f59782-a86b-4428-92ce-eedaa0921865)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1210_3225Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (gr_rect (start 123 134) (end 163 174) (layer "Dwgs.User") (width 0.15) (fill none) (tstamp 0a6a3085-d8af-4664-a574-350d758710f2)) (gr_rect locked (start 155.58 19.944) (end 195.58 99.944) (layer "Dwgs.User") (width 0.15) (fill none) (tstamp 255c8bec-7bfd-4ade-8b7e-df903b469e6d)) (gr_rect (start 252.177 109.987) (end 273.177 149.987) (layer "Dwgs.User") (width 0.15) (fill none) (tstamp 4df4b8e3-ebda-47a2-af16-72923d637471)) (gr_line locked (start 283 60) (end 20 60) (layer "Dwgs.User") (width 0.15) (tstamp 55affc86-bd55-49af-87f6-967ce424691c)) (gr_rect locked (start 13 20) (end 143 100) (layer "Dwgs.User") (width 0.15) (fill none) (tstamp 76057f30-db6f-4243-9372-5dc99653e3b7)) - (gr_poly locked + (gr_poly (pts - (xy 122.941 177.516) + (xy 122.941 181.356) + (xy 119.38 177.546) (xy 112.941 177.516) - (xy 112.941 136.516) - (xy 122.941 136.516) + (xy 112.941 134.016) + (xy 122.941 134.016) (xy 122.941 111.516) (xy 162.941 111.516) (xy 162.941 191.516) @@ -27439,6 +27681,9 @@ (gr_rect locked (start 204.094 19.944) (end 244.094 99.944) (layer "Dwgs.User") (width 0.15) (fill none) (tstamp 9cf572a8-ec97-42d7-af26-acd75ca48d20)) (gr_rect (start 175.776 162.5) (end 239.776 132.5) (layer "Dwgs.User") (width 0.15) (fill none) (tstamp ed41c664-7eea-4fdc-9a93-51a774aad832)) (gr_rect (start 30.598 111.44) (end 70.598 191.44) (layer "Dwgs.User") (width 0.15) (fill none) (tstamp ee3903e9-e67f-4b21-826c-f24dbf4489d9)) + (gr_text "HSB15-404010\nHeatsink\n40x40 mm" (at 169.5 169.5) (layer "Dwgs.User") (tstamp 12648fd4-55f4-41c3-b414-fe916a153507) + (effects (font (size 1 1) (thickness 0.15))) + ) (gr_text "Base Board" (at 17 19) (layer "Dwgs.User") (tstamp 25345a2d-f1a5-4fc9-8cb5-b73632d82c9b) (effects (font (size 1 1) (thickness 0.15))) ) @@ -27461,4 +27706,126 @@ (effects (font (size 1 1) (thickness 0.15))) ) + (segment (start 63.246 40.132) (end 63.246 51.308) (width 0.25) (layer "F.Cu") (net 15) (tstamp 0544b4a2-de0f-48f0-9126-07ee790c1208)) + (segment (start 46.99 37.338) (end 49.53 39.878) (width 0.25) (layer "F.Cu") (net 15) (tstamp 0565bade-e8b8-4d1a-89f7-7f21fac37fdc)) + (segment (start 74.168 52.07) (end 77.216 52.07) (width 0.25) (layer "F.Cu") (net 15) (tstamp 0efc7960-4839-4a9b-a9fe-fefe43f393ab)) + (segment (start 49.53 39.878) (end 60.452 39.878) (width 0.25) (layer "F.Cu") (net 15) (tstamp 2612f686-8908-4cb6-9eee-0be64cb97c6a)) + (segment (start 54.356 79.756) (end 67.056 67.056) (width 0.25) (layer "F.Cu") (net 15) (tstamp 27b9080a-d9b2-45c8-88fb-96daaf845806)) + (segment (start 63.246 51.308) (end 64.008 52.07) (width 0.25) (layer "F.Cu") (net 15) (tstamp 407680a8-5754-4098-8879-a3f1b5ff12d8)) + (segment (start 39.2665 37.338) (end 46.99 37.338) (width 0.25) (layer "F.Cu") (net 15) (tstamp 4d8255b5-1a75-405a-b883-454174b47590)) + (segment (start 64.008 52.07) (end 74.168 52.07) (width 0.25) (layer "F.Cu") (net 15) (tstamp 56ab78e3-21ff-481a-99a4-e95278bcdfb7)) + (segment (start 77.216 52.07) (end 78.486 50.8) (width 0.25) (layer "F.Cu") (net 15) (tstamp 6c953658-f1cd-43be-96ab-8a633de4dabd)) + (segment (start 54.2525 79.756) (end 54.356 79.756) (width 0.25) (layer "F.Cu") (net 15) (tstamp 827e9e37-7d7a-41f3-be75-ac6471389177)) + (segment (start 67.056 67.056) (end 67.056 59.182) (width 0.25) (layer "F.Cu") (net 15) (tstamp a1fb64d6-3c8a-4e91-9831-eac181da3e68)) + (segment (start 78.486 50.8) (end 78.486 48.147) (width 0.25) (layer "F.Cu") (net 15) (tstamp a29f2bdc-4be1-49fb-84c5-8530b7d24e34)) + (segment (start 67.056 59.182) (end 74.168 52.07) (width 0.25) (layer "F.Cu") (net 15) (tstamp f4fcf94a-84a9-447e-a24d-b6f96cd4acce)) + (via (at 60.452 39.878) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (net 15) (tstamp 3070e5ec-0a35-427d-ac09-875268c52752)) + (via (at 63.246 40.132) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (net 15) (tstamp d11d4b2d-408d-4d1c-aa2d-44e218fd97d1)) + (segment (start 62.992 39.878) (end 63.246 40.132) (width 0.25) (layer "B.Cu") (net 15) (tstamp 04a8487f-55a3-4c58-a850-21b2cdf912fa)) + (segment (start 60.452 39.878) (end 62.992 39.878) (width 0.25) (layer "B.Cu") (net 15) (tstamp 6368cc45-7850-4234-b359-a5442681fcdf)) + (segment (start 81.8095 93.7475) (end 84.328 96.266) (width 0.25) (layer "F.Cu") (net 50) (tstamp 06526f81-1f35-4e53-beaa-77826117ce8d)) + (segment (start 84.328 96.266) (end 87.5955 96.266) (width 0.25) (layer "F.Cu") (net 50) (tstamp 3ea57891-bca8-45c5-bf3d-fdd6cbf1a7ec)) + (segment (start 51.054 93.7475) (end 81.8095 93.7475) (width 0.25) (layer "F.Cu") (net 50) (tstamp 53c3bc42-9dc7-44c4-8fca-b7a37c6a7a2b)) + (segment (start 87.5955 96.266) (end 88.5455 95.316) (width 0.25) (layer "F.Cu") (net 50) (tstamp 976b6ebc-ca20-4334-a6be-88a99391cc76)) + (segment (start 101.854 35.052) (end 101.854 30.0755) (width 0.25) (layer "F.Cu") (net 97) (tstamp 001d3d06-6d64-4ea0-abca-e0d85f9c3c49)) + (segment (start 98.5285 36.068) (end 100.838 36.068) (width 0.25) (layer "F.Cu") (net 97) (tstamp 29733edf-6a28-4d4c-9d7c-b7e62e534743)) + (segment (start 100.838 36.068) (end 101.854 35.052) (width 0.25) (layer "F.Cu") (net 97) (tstamp 3064f882-8857-428c-90bd-62678a3bb49b)) + (segment (start 97.364 34.9035) (end 98.5285 36.068) (width 0.25) (layer "F.Cu") (net 97) (tstamp 82dd7955-61fb-4493-a6fc-b613ffdcb4b2)) + (segment (start 101.854 30.0755) (end 104.14 27.7895) (width 0.25) (layer "F.Cu") (net 97) (tstamp e8cd3334-c4f5-4129-8b71-c7f6d202f947)) + (segment (start 67.4635 24.384) (end 61.468 24.384) (width 0.25) (layer "F.Cu") (net 102) (tstamp 2f7e0a53-99df-4f8c-8ff3-cbaa210c140c)) + (segment (start 61.468 24.384) (end 58.674 27.178) (width 0.25) (layer "F.Cu") (net 102) (tstamp 6ed8fd47-c33b-42b9-83ba-7505f4b37364)) + (segment (start 58.674 28.5735) (end 53.614 33.6335) (width 0.25) (layer "F.Cu") (net 102) (tstamp 836e5205-d393-43aa-b765-89c1446b3395)) + (segment (start 58.674 27.178) (end 58.674 28.5735) (width 0.25) (layer "F.Cu") (net 102) (tstamp a2cc38b7-4d14-41a2-9009-534a2f35ecdb)) + (segment (start 53.614 33.6335) (end 53.004 33.6335) (width 0.25) (layer "F.Cu") (net 102) (tstamp fb4c74bc-27c3-489b-a668-5d2ffa0ecbcb)) + (segment (start 186.137 85.598) (end 185.003 84.464) (width 0.25) (layer "F.Cu") (net 115) (tstamp 43945a6f-395b-416c-b9b7-f701628196c1)) + (segment (start 177.292 96.266) (end 176.53 96.266) (width 0.25) (layer "F.Cu") (net 115) (tstamp 473e7a31-dc68-46c2-8de4-bdc92e6e143b)) + (segment (start 180.086 93.472) (end 177.292 96.266) (width 0.25) (layer "F.Cu") (net 115) (tstamp 5e2ec5ab-11a5-4724-8019-f28ecc793539)) + (segment (start 185.003 84.999) (end 182.88 87.122) (width 0.25) (layer "F.Cu") (net 115) (tstamp 62d4c29a-d0c5-4f80-a75e-8e8f43871789)) + (segment (start 182.88 87.122) (end 181.356 87.122) (width 0.25) (layer "F.Cu") (net 115) (tstamp 6a5e6ab6-80e3-4362-8110-64c0a997dfde)) + (segment (start 175.006 94.742) (end 175.006 94.6385) (width 0.25) (layer "F.Cu") (net 115) (tstamp 788769c8-0e16-41ea-b32b-ce309043ff2e)) + (segment (start 176.53 96.266) (end 175.006 94.742) (width 0.25) (layer "F.Cu") (net 115) (tstamp 79078f4a-84a8-44f4-8748-022ad7ddc0df)) + (segment (start 180.086 88.392) (end 180.086 93.472) (width 0.25) (layer "F.Cu") (net 115) (tstamp 9876d713-f37b-43b3-897b-d50f79765746)) + (segment (start 185.003 84.464) (end 185.003 84.999) (width 0.25) (layer "F.Cu") (net 115) (tstamp bf41de9c-b552-4c73-a7ec-eaf4f8fb533a)) + (segment (start 188.0635 85.598) (end 186.137 85.598) (width 0.25) (layer "F.Cu") (net 115) (tstamp f278d72e-df62-4224-ba6c-1cf6e9f92196)) + (segment (start 181.356 87.122) (end 180.086 88.392) (width 0.25) (layer "F.Cu") (net 115) (tstamp fe660dad-9239-4fdd-a3f4-7896fb8ae955)) + (segment (start 129.5 137.5) (end 129.515 137.485) (width 0.25) (layer "F.Cu") (net 147) (tstamp 2686ebd6-653e-42d4-9f34-ee544606a0bc)) + (segment (start 157.714 117.201) (end 157.353 116.84) (width 0.25) (layer "F.Cu") (net 147) (tstamp 3102006e-b353-43bb-8a9e-ab8e9ac1445d)) + (segment (start 130.539 137.485) (end 132.314 135.71) (width 0.25) (layer "F.Cu") (net 147) (tstamp 42a84f2d-b155-49d6-9351-91ba98ff5656)) + (segment (start 121 150) (end 125 146) (width 0.25) (layer "F.Cu") (net 147) (tstamp 487efa22-5bfc-47a7-af8b-8661ad0c3f5f)) + (segment (start 125 139.5) (end 127 137.5) (width 0.25) (layer "F.Cu") (net 147) (tstamp 49a31832-fd20-41e1-990b-977e36a6927a)) + (segment (start 125 146) (end 125 139.5) (width 0.25) (layer "F.Cu") (net 147) (tstamp 4c287dc6-e50a-4a0a-8eec-a690f2e7a84e)) + (segment (start 132.314 135.71) (end 132.314 128.686) (width 0.25) (layer "F.Cu") (net 147) (tstamp 82135250-785e-4dbb-8986-d01bf5f3d22e)) + (segment (start 127 137.5) (end 129.5 137.5) (width 0.25) (layer "F.Cu") (net 147) (tstamp 8fe981bf-7e15-4e4d-a571-9ae976211818)) + (segment (start 157.714 135.71) (end 157.714 117.201) (width 0.25) (layer "F.Cu") (net 147) (tstamp ae5ba832-3ce1-44eb-b511-fc32365ceb8d)) + (segment (start 129.515 137.485) (end 130.539 137.485) (width 0.25) (layer "F.Cu") (net 147) (tstamp c1b4f7b9-763a-4756-bc22-b6f9687366db)) + (via (at 132.314 128.686) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (net 147) (tstamp 13f5e1c6-ab61-443e-8576-2eca0d8377fb)) + (via (at 121 150) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (net 147) (tstamp 46b3a938-2914-42c3-b2b8-37c6228d7d69)) + (via (at 157.353 116.84) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (net 147) (tstamp d5527c9c-a8b2-46d3-9c9c-9857edff84ac)) + (segment (start 118.265 150) (end 121 150) (width 0.25) (layer "B.Cu") (net 147) (tstamp 6cdb1dca-8242-4eae-b4c3-1be2db3b750b)) + (segment (start 115.57 147.305) (end 118.265 150) (width 0.25) (layer "B.Cu") (net 147) (tstamp 80d51f23-0c57-4212-89eb-985b929ea711)) + (segment (start 157.353 116.84) (end 144.16 116.84) (width 0.25) (layer "B.Cu") (net 147) (tstamp 83fadbe4-adf9-48a5-978d-b92477e07806)) + (segment (start 144.16 116.84) (end 132.314 128.686) (width 0.25) (layer "B.Cu") (net 147) (tstamp 9a84ac0e-de77-48a2-8bc6-82e4595df2a8)) + (segment (start 60.941 46.416) (end 59.991 45.466) (width 0.25) (layer "F.Cu") (net 171) (tstamp 21883b76-71a9-44e7-8dd3-b47d3969ddb4)) + (segment (start 59.991 45.466) (end 61.804 43.653) (width 0.25) (layer "F.Cu") (net 171) (tstamp 4619fffd-8c3b-470a-a1bf-a531b3247d8d)) + (segment (start 59.666 52.258) (end 60.941 50.983) (width 0.25) (layer "F.Cu") (net 171) (tstamp 6e33e393-8431-4b63-8173-906e50360f55)) + (segment (start 60.941 50.983) (end 60.941 46.416) (width 0.25) (layer "F.Cu") (net 171) (tstamp 725b9877-533d-4fb9-9996-fb65cbf5f220)) + (segment (start 61.804 43.653) (end 61.804 34.9035) (width 0.25) (layer "F.Cu") (net 171) (tstamp 8dacb9f7-03f6-4e7d-9f30-8bb154a14cec)) + (segment (start 170.946 89.408) (end 172.466 89.408) (width 0.25) (layer "F.Cu") (net 294) (tstamp 0ba58c28-0ca3-42b9-85ee-78f84b3f8b90)) + (segment (start 189.8885 85.598) (end 191.869 85.598) (width 0.25) (layer "F.Cu") (net 294) (tstamp 108bcfb5-d7f5-4b1e-8cad-39c912940c9c)) + (segment (start 187.96 81.534) (end 190.89 84.464) (width 0.25) (layer "F.Cu") (net 294) (tstamp 1e32969b-6e6e-484f-a77b-7bc45dddb0c2)) + (segment (start 170.196 88.658) (end 170.946 89.408) (width 0.25) (layer "F.Cu") (net 294) (tstamp 5317239e-6b02-4b48-a39f-894efe2ca2cb)) + (segment (start 172.466 89.408) (end 180.34 81.534) (width 0.25) (layer "F.Cu") (net 294) (tstamp 5d9e3da8-eeb9-42aa-a16b-a455359e10d2)) + (segment (start 180.34 81.534) (end 187.96 81.534) (width 0.25) (layer "F.Cu") (net 294) (tstamp c2c2bcd7-51f5-480f-96c7-1f4f2d7015e4)) + (segment (start 190.89 84.464) (end 193.003 84.464) (width 0.25) (layer "F.Cu") (net 294) (tstamp f637b697-6a21-4ad4-8ab6-c326b409d658)) + (segment (start 191.869 85.598) (end 193.003 84.464) (width 0.25) (layer "F.Cu") (net 294) (tstamp ff144c88-568d-467f-aada-33c0ddf9c8a0)) + (segment (start 164.395 94.231) (end 162.306 92.142) (width 0.25) (layer "F.Cu") (net 296) (tstamp 0d17cfdb-9af1-4ac6-bbeb-5998c40d88ef)) + (segment (start 164.395 95.307) (end 164.395 94.231) (width 0.25) (layer "F.Cu") (net 296) (tstamp 3949f8d4-5afb-4be3-b687-ad7d9bbd9bf4)) + (segment (start 166.37 97.282) (end 164.395 95.307) (width 0.25) (layer "F.Cu") (net 296) (tstamp 6ef641a7-6198-4e8b-9eaf-7a32340f5bc6)) + (segment (start 170.18 96.1625) (end 169.0605 97.282) (width 0.25) (layer "F.Cu") (net 296) (tstamp 7c828f13-8a79-48bb-84b3-c372bea431c4)) + (segment (start 162.306 70.612) (end 157.988 66.294) (width 0.25) (layer "F.Cu") (net 296) (tstamp 7e28fb74-dec5-4e57-8369-0ccdb70736c2)) + (segment (start 169.0605 97.282) (end 166.37 97.282) (width 0.25) (layer "F.Cu") (net 296) (tstamp a2199aef-4d79-4b15-bd70-4e7792671898)) + (segment (start 162.306 92.142) (end 162.306 70.612) (width 0.25) (layer "F.Cu") (net 296) (tstamp b6920850-f1ee-42b7-b200-485c09114cf7)) + (segment (start 99.2105 54.2525) (end 99.314 54.356) (width 0.25) (layer "F.Cu") (net 305) (tstamp 0ad2c086-7db9-4622-bac0-4800c6e20fde)) + (segment (start 91.5455 33.6335) (end 101.854 43.942) (width 0.25) (layer "F.Cu") (net 305) (tstamp 4a5c9061-ceed-452f-8b7e-4b458f19615c)) + (segment (start 88.564 33.6335) (end 91.5455 33.6335) (width 0.25) (layer "F.Cu") (net 305) (tstamp c0abd728-ef6c-44c0-88c4-63f73060127e)) + (segment (start 73.7635 42.418) (end 64.516 33.1705) (width 0.25) (layer "F.Cu") (net 307) (tstamp 187509ad-f951-44be-be15-70d1ffd0cc70)) + (segment (start 64.516 33.1705) (end 64.516 32.8695) (width 0.25) (layer "F.Cu") (net 307) (tstamp b4da9eb7-0ded-48d4-bd7c-4e40c94cd789)) + (segment (start 73.7635 40.894) (end 77.3195 37.338) (width 0.25) (layer "F.Cu") (net 308) (tstamp 0864c6ef-fa38-4f5a-a29a-3bd4ba5fd6df)) + (segment (start 81.788 35.052) (end 81.788 26.162) (width 0.25) (layer "F.Cu") (net 308) (tstamp 11b5eae6-6b9e-475a-8796-906d52805172)) + (segment (start 77.3195 37.338) (end 79.502 37.338) (width 0.25) (layer "F.Cu") (net 308) (tstamp 1f19f741-4580-44eb-8020-73b60cb33656)) + (segment (start 81.788 26.162) (end 85.852 22.098) (width 0.25) (layer "F.Cu") (net 308) (tstamp 23e3e740-8722-4382-b8fb-967e9e3bf800)) + (segment (start 79.502 37.338) (end 81.788 35.052) (width 0.25) (layer "F.Cu") (net 308) (tstamp 2ae35ff5-1080-41fd-9924-56896e80859e)) + (segment (start 99.822 22.098) (end 101.404499 23.680499) (width 0.25) (layer "F.Cu") (net 308) (tstamp 4f751d90-3ce6-4d7f-8167-ccc0571e5d63)) + (segment (start 85.852 22.098) (end 99.822 22.098) (width 0.25) (layer "F.Cu") (net 308) (tstamp 5fbb7352-1a3e-4031-bf0e-ed0edc2cf23d)) + (segment (start 101.217 31.371) (end 99.822 31.371) (width 0.25) (layer "F.Cu") (net 308) (tstamp 6656eb7d-3d59-4e37-8b63-80a2f718aa1f)) + (segment (start 101.404499 23.680499) (end 101.404499 31.183501) (width 0.25) (layer "F.Cu") (net 308) (tstamp ba63fb17-a8fc-45f2-8623-3eb88f772551)) + (segment (start 101.404499 31.183501) (end 101.217 31.371) (width 0.25) (layer "F.Cu") (net 308) (tstamp c5a66bec-2b54-4a7b-bc3d-6d7f2ab3f655)) + (segment (start 101.092 70.104) (end 95.917 64.929) (width 0.25) (layer "F.Cu") (net 343) (tstamp 4e787a6b-54a6-4a08-9c84-54bc23b5bdf9)) + (segment (start 95.917 62.389) (end 94.742 61.214) (width 0.25) (layer "F.Cu") (net 343) (tstamp 79d51c5b-33f0-421a-aba6-9140372db33b)) + (segment (start 101.092 87.376) (end 101.092 70.104) (width 0.25) (layer "F.Cu") (net 343) (tstamp 9c14633f-93e7-4862-ba60-bce08b8c90c8)) + (segment (start 95.917 64.929) (end 95.917 62.389) (width 0.25) (layer "F.Cu") (net 343) (tstamp bfff8598-4b25-4c7b-8ab8-400502f0055d)) + (segment (start 129 128) (end 130.5 126.5) (width 0.25) (layer "F.Cu") (net 360) (tstamp 1bfef5fe-b65b-48f1-9128-bc8ddb8d7d98)) + (segment (start 122 145.5) (end 122 137) (width 0.25) (layer "F.Cu") (net 360) (tstamp 21b8b27e-0afe-45d2-a02e-12c4dd630bd1)) + (segment (start 139.61 130.61) (end 139.61 131.182) (width 0.25) (layer "F.Cu") (net 360) (tstamp 25b40765-2b41-4155-803c-0b0505df4ac2)) + (segment (start 118.618 148.882) (end 122 145.5) (width 0.25) (layer "F.Cu") (net 360) (tstamp 837cac1a-a4a3-43fb-a514-bbe4b55c3a37)) + (segment (start 135.5 126.5) (end 139.61 130.61) (width 0.25) (layer "F.Cu") (net 360) (tstamp b8210357-c658-4834-90ca-f1d7d0779329)) + (segment (start 118.618 152.8865) (end 118.618 148.882) (width 0.25) (layer "F.Cu") (net 360) (tstamp ca712cbf-c6b8-4d8b-bdcb-43ef1243d683)) + (segment (start 129 130) (end 129 128) (width 0.25) (layer "F.Cu") (net 360) (tstamp d172f1bd-372a-42be-a76d-6bf2869bf394)) + (segment (start 122 137) (end 129 130) (width 0.25) (layer "F.Cu") (net 360) (tstamp d203d7fb-f1ab-4c42-8189-83e8d37894cf)) + (segment (start 130.5 126.5) (end 135.5 126.5) (width 0.25) (layer "F.Cu") (net 360) (tstamp e6a79582-7122-4e79-a50f-3af5fd707a63)) + + (zone (net 0) (net_name "") (layer "B.Cu") (tstamp 075a2217-cc21-4fce-b551-8a6591491661) (name "heatsink") (hatch edge 0.508) + (connect_pads (clearance 0)) + (min_thickness 0.254) + (keepout (tracks not_allowed) (vias not_allowed) (pads not_allowed) (copperpour allowed) (footprints not_allowed)) + (fill (thermal_gap 0.508) (thermal_bridge_width 0.508)) + (polygon + (pts + (xy 163 174) + (xy 123 174) + (xy 123 134) + (xy 163 134) + ) + ) + ) ) |