Assemble TX FE and update comments

8 files changed, 29 insertions, 15 deletions

diff --git a/kicad-dart-70/ant_switch.kicad_sch b/kicad-dart-70/ant_switch.kicad_sch
index 8a688f4..1e0f9fa 100644
--- a/kicad-dart-70/ant_switch.kicad_sch
+++ b/kicad-dart-70/ant_switch.kicad_sch
@@ -6,7 +6,7 @@
 
   (title_block
     (title "DART-70 TRX")
-    (date "2023-04-07")
+    (date "2023-04-10")
     (rev "1")
     (company "HB9EGM")
     (comment 1 "A 4m Band SSB/CW Transceiver")
@@ -1015,12 +1015,16 @@
     (uuid f971c761-1290-4687-adad-e0546cf92762)
   )
 
+  (text "Rev. 0 Assembled\nR165, R166 = 160R\nR170 = 91R" (at 85.09 149.86 0)
+    (effects (font (size 1 1)) (justify left bottom))
+    (uuid 55d0830d-42f7-443f-8d32-61d4940b3031)
+  )
   (text "Offer either +V on TX or +V on RX\non antenna connector to control external\npreamp or PA."
     (at 220.98 52.07 0)
     (effects (font (size 1.27 1.27)) (justify left bottom))
     (uuid 69907678-12f7-4380-91bd-fa3caa6922b6)
   )
-  (text "First try without fitting neither D1 nor D2, and then see if isolation is enough.\n\n+VTX 9V: Q1A conducting, V_{PIN}=0V, D4 blocking, D2 conducting, D1 blocking, D3 conducting. Antenna connected to TX.\n+VTX 0V: Q1B conducting, V_{PIN}=9V, D4 conducting, D2 blocking, D1 conducting, D3 blocking. Antenna connected to RX.\n\nBAT18: approx 1pF with 2V reverse voltage; 0.5Ohm at 10mA forward current, 0.8V drop.\n\n(9V - 5V - 0.8V) / 8mA = 400 Ohm"
+  (text "First try without fitting neither D24 nor D25, and then see if isolation is enough.\n\n+VTX 9V: Q31A conducting, V_{PIN} low, D26 blocking, D24 conducting, D25 blocking, D27 conducting. Antenna connected to TX.\n+VTX 0V: Q31B conducting, V_{PIN} high, D26 conducting, D24 blocking, D25 conducting, D27 blocking. Antenna connected to RX.\n\nBAT18: approx 1pF with 2V reverse voltage; 0.5Ohm at 10mA forward current, 0.8V drop.\n\n(9V - 5V - 0.8V) / 8mA = 400 Ohm"
     (at 85.09 127 0)
     (effects (font (size 1.27 1.27)) (justify left bottom))
     (uuid d437a213-62ef-4c36-8319-8e53f14fca2d)
diff --git a/kicad-dart-70/baseband.kicad_sch b/kicad-dart-70/baseband.kicad_sch
index b1292f5..e28eba5 100644
--- a/kicad-dart-70/baseband.kicad_sch
+++ b/kicad-dart-70/baseband.kicad_sch
@@ -6,7 +6,7 @@
 
   (title_block
     (title "DART-70 TRX")
-    (date "2023-04-07")
+    (date "2023-04-10")
     (rev "1")
     (company "HB9EGM")
     (comment 1 "A 4m Band SSB/CW Transceiver")
@@ -8451,7 +8451,7 @@
     (property "Reference" "C48" (at 140.97 198.1199 0)
       (effects (font (size 1.27 1.27)) (justify left))
     )
-    (property "Value" "4.7uF" (at 140.97 200.6599 0)
+    (property "Value" "2.2uF" (at 140.97 200.6599 0)
       (effects (font (size 1.27 1.27)) (justify left))
     )
     (property "Footprint" "Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder" (at 138.1252 195.58 0)
diff --git a/kicad-dart-70/control.kicad_sch b/kicad-dart-70/control.kicad_sch
index 030bd35..18888e6 100644
--- a/kicad-dart-70/control.kicad_sch
+++ b/kicad-dart-70/control.kicad_sch
@@ -6,7 +6,7 @@
 
   (title_block
     (title "DART-70 TRX")
-    (date "2023-04-07")
+    (date "2023-04-10")
     (rev "1")
     (company "HB9EGM")
     (comment 1 "A 4m Band SSB/CW Transceiver")
diff --git a/kicad-dart-70/frontend_70.kicad_sch b/kicad-dart-70/frontend_70.kicad_sch
index 41d4d5a..b863106 100644
--- a/kicad-dart-70/frontend_70.kicad_sch
+++ b/kicad-dart-70/frontend_70.kicad_sch
@@ -6,7 +6,7 @@
 
   (title_block
     (title "DART-70 TRX")
-    (date "2023-04-07")
+    (date "2023-04-10")
     (rev "1")
     (company "HB9EGM")
     (comment 1 "A 4m Band SSB/CW Transceiver")
@@ -2127,6 +2127,11 @@
     (effects (font (size 1.27 1.27)) (justify left bottom))
     (uuid 260b3d6d-8cd9-4800-8937-c0409e2ee02d)
   )
+  (text "Rev.0 assembled with\nC133 shorted, no output filter\n"
+    (at 264.16 163.83 0)
+    (effects (font (size 0.8 0.8)) (justify left bottom))
+    (uuid 26bb5a1d-db2c-4a6b-9eba-d7e2ac5d1f96)
+  )
   (text "Calculated values for\n3rd order Chebychev, shunt first\nPassband 66MHz .. 74MHz, Bandpass Ripple 0.2dB:\n\nshunt 488pF 10nH\nseries 4.7pF 1150uH (12T on 8mm former, 12mm length, 41cm wire length)\n\nThis was too low in frequency"
     (at 23.495 96.52 0)
     (effects (font (size 1 1)) (justify left bottom))
@@ -2140,9 +2145,9 @@
     (effects (font (size 1.27 1.27)) (justify left bottom))
     (uuid 49280407-40ca-40ad-b550-c8e0a5ba5bec)
   )
-  (text "TODO\nfind bias point for BSV52\n aim for I_{C} = 10mA"
-    (at 88.9 194.31 0)
-    (effects (font (size 2 2)) (justify left bottom))
+  (text "Bias point for BSV52\n aim for I_{C} = 10mA\n with R135=4.7k, measure 0.45V V_{E}, I_{C} = 37mA\n with R135=5.6k, same\nLeft 5.6k\n "
+    (at 129.54 180.975 0)
+    (effects (font (size 1.2 1.2)) (justify left bottom))
     (uuid 4c91f99c-b34d-4969-97d5-5270c851233c)
   )
   (text "http://w7zoi.net/lna50.pdf\n\nChange R_{B} to have 4V at top gate.\n\nDecrease R_{S} to have I_{D} around 5 to 6 mA.\nTry 68 Ohm."
@@ -2164,6 +2169,11 @@
     (effects (font (size 1.27 1.27)) (justify left bottom))
     (uuid a30cddd0-0438-4b2d-9649-32a0ca0524d8)
   )
+  (text "Rev. 0\nassembled\nC98, C102 = 33pF\nC97, C104 = 5pF\nC100 = 4pF\nMeasured -6dB at 70MHz with LQW inductors.\nThen used 5T air coils on 6mm former. Oscillation at 76MHz due to L36.\nReplaced L36 by BLM 0603 ferrite.\nBodged in a JZ trim cap instead of C120, tune to 70MHz"
+    (at 53.975 184.785 0)
+    (effects (font (size 1 1)) (justify left bottom))
+    (uuid aa2e1f3c-d617-48f8-9213-95c523ebe363)
+  )
   (text "0.1V" (at 201.93 151.13 0)
     (effects (font (size 1.27 1.27)) (justify left bottom))
     (uuid b4920cd9-e2c8-4eb6-ae7f-eeaebfb2a089)
@@ -5624,10 +5634,10 @@
   (symbol (lib_id "Device:R") (at 170.18 154.94 180) (unit 1)
     (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced)
     (uuid ea787026-7b61-4bb4-bd75-934472c94939)
-    (property "Reference" "R130" (at 172.72 153.6699 0)
+    (property "Reference" "R130" (at 172.72 154.305 0)
       (effects (font (size 1.27 1.27)) (justify right))
     )
-    (property "Value" "DNF" (at 172.72 156.2099 0)
+    (property "Value" "3M" (at 172.72 156.845 0)
       (effects (font (size 1.27 1.27)) (justify right))
     )
     (property "Footprint" "Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder" (at 171.958 154.94 90)
diff --git a/kicad-dart-70/kicad-dart-70.kicad_prl b/kicad-dart-70/kicad-dart-70.kicad_prl
index 871f084..5a85b3c 100644
--- a/kicad-dart-70/kicad-dart-70.kicad_prl
+++ b/kicad-dart-70/kicad-dart-70.kicad_prl
@@ -1,6 +1,6 @@
 {
   "board": {
-    "active_layer": 0,
+    "active_layer": 37,
     "active_layer_preset": "",
     "auto_track_width": true,
     "hidden_netclasses": [],
diff --git a/kicad-dart-70/kicad-dart-70.kicad_sch b/kicad-dart-70/kicad-dart-70.kicad_sch
index ec9fad0..d809b80 100644
--- a/kicad-dart-70/kicad-dart-70.kicad_sch
+++ b/kicad-dart-70/kicad-dart-70.kicad_sch
@@ -6,7 +6,7 @@
 
   (title_block
     (title "DART-70 TRX")
-    (date "2023-04-07")
+    (date "2023-04-10")
     (rev "1")
     (company "HB9EGM")
     (comment 1 "A 4m Band SSB/CW Transceiver")
diff --git a/kicad-dart-70/pa_70.kicad_sch b/kicad-dart-70/pa_70.kicad_sch
index c689133..6659232 100644
--- a/kicad-dart-70/pa_70.kicad_sch
+++ b/kicad-dart-70/pa_70.kicad_sch
@@ -6,7 +6,7 @@
 
   (title_block
     (title "DART-70 TRX")
-    (date "2023-04-07")
+    (date "2023-04-10")
     (rev "1")
     (company "HB9EGM")
     (comment 1 "A 4m Band SSB/CW Transceiver")
diff --git a/kicad-dart-70/usbaudio.kicad_sch b/kicad-dart-70/usbaudio.kicad_sch
index 465604a..ab80f7d 100644
--- a/kicad-dart-70/usbaudio.kicad_sch
+++ b/kicad-dart-70/usbaudio.kicad_sch
@@ -6,7 +6,7 @@
 
   (title_block
     (title "DART-70 TRX")
-    (date "2023-04-07")
+    (date "2023-04-10")
     (rev "1")
     (company "HB9EGM")
     (comment 1 "A 4m Band SSB/CW Transceiver")