aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--README.md2
-rw-r--r--src/main.ino115
2 files changed, 79 insertions, 38 deletions
diff --git a/README.md b/README.md
index 71a3e6d..cc43f96 100644
--- a/README.md
+++ b/README.md
@@ -1,7 +1,7 @@
NUCLEO-H743ZI APRS-LoRa Tracker
===============================
-Connect u-blox NEO-M8N (or other u-blox receiver) to USART-B (RX PD5 and TX PD6) and RFM96 to SPI.
+Connect u-blox NEO-M8N (or other u-blox receiver) to USART-B (RX PD5 and TX PD6) and RFM96 to SPI A and
See src/main.ino for definitions.
diff --git a/src/main.ino b/src/main.ino
index fe4ef95..4bcca3e 100644
--- a/src/main.ino
+++ b/src/main.ino
@@ -4,15 +4,17 @@
#include <SparkFun_u-blox_GNSS_Arduino_Library.h>
// SX1278 has the following connections:
-// NSS pin: 10
-// DIO0 pin: 2
-// RESET pin: 9
-// DIO1 pin: 3
-RFM96 radio = new Module(10, 2, 9, 3);
-
+// NSS pin: PD14 (Arduino 10)
+// DIO0 pin: PF3 (Arduino 8)
+// RESET pin: PF15 (Arduino 9)
+RFM96 radio = new Module(10, 8, 9);
HardwareSerial SerialGNSS(PD6, PD5);
SFE_UBLOX_GNSS gnss;
+
long lastGnssPoll = 0;
+long lastPositionReport = 0;
+constexpr size_t POSITION_REPORT_LEN = 32;
+char positionReport[POSITION_REPORT_LEN+1];
static char letterize(int x) {
return (char) x + 65;
@@ -66,9 +68,8 @@ void setup() {
byte versionLow = gnss.getProtocolVersionLow();
Serial.println(versionLow);
-#if 0
Serial.print(F("[RFM] Init "));
- int state = radio.begin();
+ int state = radio.begin(433.900);
if (state == RADIOLIB_ERR_NONE) {
Serial.println(F("success!"));
} else {
@@ -77,8 +78,38 @@ void setup() {
while (true);
}
+ if (radio.setBandwidth(125.0) == RADIOLIB_ERR_INVALID_BANDWIDTH) {
+ Serial.println(F("Selected bandwidth is invalid for this module!"));
+ while (true);
+ }
+
+ if (radio.setSpreadingFactor(12) == RADIOLIB_ERR_INVALID_SPREADING_FACTOR) {
+ Serial.println(F("Selected spreading factor is invalid for this module!"));
+ while (true);
+ }
+
+ if (radio.setCodingRate(5) == RADIOLIB_ERR_INVALID_CODING_RATE) {
+ Serial.println(F("Selected coding rate is invalid for this module!"));
+ while (true);
+ }
+
+ // NOTE: value 0x34 is reserved for LoRaWAN networks and should not be used
+ if (radio.setSyncWord(0x14) != RADIOLIB_ERR_NONE) {
+ Serial.println(F("Unable to set sync word!"));
+ while (true);
+ }
+
+ if (radio.setOutputPower(16) == RADIOLIB_ERR_INVALID_OUTPUT_POWER) {
+ Serial.println(F("Selected output power is invalid for this module!"));
+ while (true);
+ }
+
+ if (radio.setPreambleLength(8) == RADIOLIB_ERR_INVALID_PREAMBLE_LENGTH) {
+ Serial.println(F("Selected preamble length is invalid for this module!"));
+ while (true);
+ }
+
// radio.setRfSwitchPins(4, 5);
-#endif
}
void loop()
@@ -95,7 +126,7 @@ void loop()
Serial.print(F(" Long: "));
Serial.print(longitude);
- char* locator = get_mh((double)latitude/1e7, (double)longitude/1e7, 6);
+ char *locator = get_mh((double)latitude/1e7, (double)longitude/1e7, 10);
Serial.print(F(" Loc: "));
Serial.print(locator);
@@ -109,45 +140,55 @@ void loop()
Serial.print(speed);
Serial.print(F(" (mm/s)"));
- long heading = gnss.getHeading();
- Serial.print(F(" Heading: "));
- Serial.print(heading);
- Serial.print(F(" (degrees * 10^-5)"));
+ /*
+ long heading = gnss.getHeading();
+ Serial.print(F(" Heading: "));
+ Serial.print(heading);
+ Serial.print(F(" (degrees * 10^-5)"));
+ */
byte SIV = gnss.getSIV();
Serial.print(F(" SIV: "));
Serial.print(SIV);
+ Serial.print(F(" TX in: "));
+ constexpr long TX_INTERVAL = 15000;
+ Serial.print(TX_INTERVAL - (now - lastPositionReport));
+
Serial.println();
- }
-}
-void loop2()
-{
- digitalWrite(LED_BUILTIN, HIGH);
- delay(1000);
+ if (now - lastPositionReport > TX_INTERVAL) {
+ lastPositionReport = now;
- Serial.print(F("[RFM] Transmitting packet ... "));
+ digitalWrite(LED_BUILTIN, HIGH);
- int state = radio.transmit("Hello World!");
+ ssize_t len = snprintf(positionReport, POSITION_REPORT_LEN, "HB9EGM %s", locator);
- if (state == RADIOLIB_ERR_NONE) {
- Serial.println(F(" success!"));
- Serial.print(F("[RFM] Datarate:\t"));
- Serial.print(radio.getDataRate());
- Serial.println(F(" bps"));
+ Serial.print(F("TX: "));
+ Serial.print(positionReport);
- } else if (state == RADIOLIB_ERR_PACKET_TOO_LONG) {
- Serial.println(F("too long!"));
+ int state = radio.transmit(positionReport, len);
- } else if (state == RADIOLIB_ERR_TX_TIMEOUT) {
- Serial.println(F("timeout!"));
+ if (state == RADIOLIB_ERR_NONE) {
+ Serial.print(F(" RFM OK Datarate: "));
+ Serial.print(radio.getDataRate());
+ Serial.println(F(" bps"));
- } else {
- Serial.print(F("failed, code "));
- Serial.println(state);
- }
+ }
+ else if (state == RADIOLIB_ERR_PACKET_TOO_LONG) {
+ Serial.println(F(" too long!"));
- digitalWrite(LED_BUILTIN, LOW);
- delay(1000);
+ }
+ else if (state == RADIOLIB_ERR_TX_TIMEOUT) {
+ Serial.println(F(" timeout!"));
+
+ }
+ else {
+ Serial.print(F(" failed, code "));
+ Serial.println(state);
+ }
+
+ digitalWrite(LED_BUILTIN, LOW);
+ }
+ }
}