diff options
Diffstat (limited to 'src/bsp/lib/src/peripherals/misc.c')
| -rw-r--r-- | src/bsp/lib/src/peripherals/misc.c | 249 |
1 files changed, 249 insertions, 0 deletions
diff --git a/src/bsp/lib/src/peripherals/misc.c b/src/bsp/lib/src/peripherals/misc.c new file mode 100644 index 0000000..ffab3a5 --- /dev/null +++ b/src/bsp/lib/src/peripherals/misc.c @@ -0,0 +1,249 @@ +/**
+ ******************************************************************************
+ * @file misc.c
+ * @author MCD Application Team
+ * @version V1.0.2
+ * @date 05-March-2012
+ * @brief This file provides all the miscellaneous firmware functions (add-on
+ * to CMSIS functions).
+ *
+ * @verbatim
+ *
+ * ===================================================================
+ * How to configure Interrupts using driver
+ * ===================================================================
+ *
+ * This section provide functions allowing to configure the NVIC interrupts (IRQ).
+ * The Cortex-M4 exceptions are managed by CMSIS functions.
+ *
+ * 1. Configure the NVIC Priority Grouping using NVIC_PriorityGroupConfig()
+ * function according to the following table.
+
+ * The table below gives the allowed values of the pre-emption priority and subpriority according
+ * to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function
+ * ==========================================================================================================================
+ * NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description
+ * ==========================================================================================================================
+ * NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority
+ * | | | 4 bits for subpriority
+ * --------------------------------------------------------------------------------------------------------------------------
+ * NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority
+ * | | | 3 bits for subpriority
+ * --------------------------------------------------------------------------------------------------------------------------
+ * NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority
+ * | | | 2 bits for subpriority
+ * --------------------------------------------------------------------------------------------------------------------------
+ * NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority
+ * | | | 1 bits for subpriority
+ * --------------------------------------------------------------------------------------------------------------------------
+ * NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority
+ * | | | 0 bits for subpriority
+ * ==========================================================================================================================
+ *
+ * 2. Enable and Configure the priority of the selected IRQ Channels using NVIC_Init()
+ *
+ * @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible.
+ * The pending IRQ priority will be managed only by the subpriority.
+ *
+ * @note IRQ priority order (sorted by highest to lowest priority):
+ * - Lowest pre-emption priority
+ * - Lowest subpriority
+ * - Lowest hardware priority (IRQ number)
+ *
+ * @endverbatim
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "misc.h"
+
+/** @addtogroup STM32F4xx_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup MISC
+ * @brief MISC driver modules
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000)
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup MISC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Configures the priority grouping: pre-emption priority and subpriority.
+ * @param NVIC_PriorityGroup: specifies the priority grouping bits length.
+ * This parameter can be one of the following values:
+ * @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority
+ * 4 bits for subpriority
+ * @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority
+ * 3 bits for subpriority
+ * @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority
+ * 2 bits for subpriority
+ * @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority
+ * 1 bits for subpriority
+ * @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority
+ * 0 bits for subpriority
+ * @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible.
+ * The pending IRQ priority will be managed only by the subpriority.
+ * @retval None
+ */
+void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup));
+
+ /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */
+ SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup;
+}
+
+/**
+ * @brief Initializes the NVIC peripheral according to the specified
+ * parameters in the NVIC_InitStruct.
+ * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
+ * function should be called before.
+ * @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains
+ * the configuration information for the specified NVIC peripheral.
+ * @retval None
+ */
+void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
+{
+ uint8_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F;
+
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd));
+ assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority));
+ assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority));
+
+ if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE)
+ {
+ /* Compute the Corresponding IRQ Priority --------------------------------*/
+ tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08;
+ tmppre = (0x4 - tmppriority);
+ tmpsub = tmpsub >> tmppriority;
+
+ tmppriority = NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre;
+ tmppriority |= (uint8_t)(NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub);
+
+ tmppriority = tmppriority << 0x04;
+
+ NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority;
+
+ /* Enable the Selected IRQ Channels --------------------------------------*/
+ NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
+ (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
+ }
+ else
+ {
+ /* Disable the Selected IRQ Channels -------------------------------------*/
+ NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
+ (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
+ }
+}
+
+/**
+ * @brief Sets the vector table location and Offset.
+ * @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory.
+ * This parameter can be one of the following values:
+ * @arg NVIC_VectTab_RAM: Vector Table in internal SRAM.
+ * @arg NVIC_VectTab_FLASH: Vector Table in internal FLASH.
+ * @param Offset: Vector Table base offset field. This value must be a multiple of 0x200.
+ * @retval None
+ */
+void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_VECTTAB(NVIC_VectTab));
+ assert_param(IS_NVIC_OFFSET(Offset));
+
+ SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80);
+}
+
+/**
+ * @brief Selects the condition for the system to enter low power mode.
+ * @param LowPowerMode: Specifies the new mode for the system to enter low power mode.
+ * This parameter can be one of the following values:
+ * @arg NVIC_LP_SEVONPEND: Low Power SEV on Pend.
+ * @arg NVIC_LP_SLEEPDEEP: Low Power DEEPSLEEP request.
+ * @arg NVIC_LP_SLEEPONEXIT: Low Power Sleep on Exit.
+ * @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_LP(LowPowerMode));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ SCB->SCR |= LowPowerMode;
+ }
+ else
+ {
+ SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode);
+ }
+}
+
+/**
+ * @brief Configures the SysTick clock source.
+ * @param SysTick_CLKSource: specifies the SysTick clock source.
+ * This parameter can be one of the following values:
+ * @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source.
+ * @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source.
+ * @retval None
+ */
+void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource));
+ if (SysTick_CLKSource == SysTick_CLKSource_HCLK)
+ {
+ SysTick->CTRL |= SysTick_CLKSource_HCLK;
+ }
+ else
+ {
+ SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8;
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|