diff options
Diffstat (limited to 'src/bsp/lib/inc/peripherals/stm32f4xx_dcmi.h')
-rw-r--r-- | src/bsp/lib/inc/peripherals/stm32f4xx_dcmi.h | 312 |
1 files changed, 312 insertions, 0 deletions
diff --git a/src/bsp/lib/inc/peripherals/stm32f4xx_dcmi.h b/src/bsp/lib/inc/peripherals/stm32f4xx_dcmi.h new file mode 100644 index 0000000..2b4d27f --- /dev/null +++ b/src/bsp/lib/inc/peripherals/stm32f4xx_dcmi.h @@ -0,0 +1,312 @@ +/**
+ ******************************************************************************
+ * @file stm32f4xx_dcmi.h
+ * @author MCD Application Team
+ * @version V1.0.2
+ * @date 05-March-2012
+ * @brief This file contains all the functions prototypes for the DCMI firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_DCMI_H
+#define __STM32F4xx_DCMI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+
+/** @addtogroup STM32F4xx_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup DCMI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief DCMI Init structure definition
+ */
+typedef struct
+{
+ uint16_t DCMI_CaptureMode; /*!< Specifies the Capture Mode: Continuous or Snapshot.
+ This parameter can be a value of @ref DCMI_Capture_Mode */
+
+ uint16_t DCMI_SynchroMode; /*!< Specifies the Synchronization Mode: Hardware or Embedded.
+ This parameter can be a value of @ref DCMI_Synchronization_Mode */
+
+ uint16_t DCMI_PCKPolarity; /*!< Specifies the Pixel clock polarity: Falling or Rising.
+ This parameter can be a value of @ref DCMI_PIXCK_Polarity */
+
+ uint16_t DCMI_VSPolarity; /*!< Specifies the Vertical synchronization polarity: High or Low.
+ This parameter can be a value of @ref DCMI_VSYNC_Polarity */
+
+ uint16_t DCMI_HSPolarity; /*!< Specifies the Horizontal synchronization polarity: High or Low.
+ This parameter can be a value of @ref DCMI_HSYNC_Polarity */
+
+ uint16_t DCMI_CaptureRate; /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4.
+ This parameter can be a value of @ref DCMI_Capture_Rate */
+
+ uint16_t DCMI_ExtendedDataMode; /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit.
+ This parameter can be a value of @ref DCMI_Extended_Data_Mode */
+} DCMI_InitTypeDef;
+
+/**
+ * @brief DCMI CROP Init structure definition
+ */
+typedef struct
+{
+ uint16_t DCMI_VerticalStartLine; /*!< Specifies the Vertical start line count from which the image capture
+ will start. This parameter can be a value between 0x00 and 0x1FFF */
+
+ uint16_t DCMI_HorizontalOffsetCount; /*!< Specifies the number of pixel clocks to count before starting a capture.
+ This parameter can be a value between 0x00 and 0x3FFF */
+
+ uint16_t DCMI_VerticalLineCount; /*!< Specifies the number of lines to be captured from the starting point.
+ This parameter can be a value between 0x00 and 0x3FFF */
+
+ uint16_t DCMI_CaptureCount; /*!< Specifies the number of pixel clocks to be captured from the starting
+ point on the same line.
+ This parameter can be a value between 0x00 and 0x3FFF */
+} DCMI_CROPInitTypeDef;
+
+/**
+ * @brief DCMI Embedded Synchronisation CODE Init structure definition
+ */
+typedef struct
+{
+ uint8_t DCMI_FrameStartCode; /*!< Specifies the code of the frame start delimiter. */
+ uint8_t DCMI_LineStartCode; /*!< Specifies the code of the line start delimiter. */
+ uint8_t DCMI_LineEndCode; /*!< Specifies the code of the line end delimiter. */
+ uint8_t DCMI_FrameEndCode; /*!< Specifies the code of the frame end delimiter. */
+} DCMI_CodesInitTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DCMI_Exported_Constants
+ * @{
+ */
+
+/** @defgroup DCMI_Capture_Mode
+ * @{
+ */
+#define DCMI_CaptureMode_Continuous ((uint16_t)0x0000) /*!< The received data are transferred continuously
+ into the destination memory through the DMA */
+#define DCMI_CaptureMode_SnapShot ((uint16_t)0x0002) /*!< Once activated, the interface waits for the start of
+ frame and then transfers a single frame through the DMA */
+#define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_CaptureMode_Continuous) || \
+ ((MODE) == DCMI_CaptureMode_SnapShot))
+/**
+ * @}
+ */
+
+
+/** @defgroup DCMI_Synchronization_Mode
+ * @{
+ */
+#define DCMI_SynchroMode_Hardware ((uint16_t)0x0000) /*!< Hardware synchronization data capture (frame/line start/stop)
+ is synchronized with the HSYNC/VSYNC signals */
+#define DCMI_SynchroMode_Embedded ((uint16_t)0x0010) /*!< Embedded synchronization data capture is synchronized with
+ synchronization codes embedded in the data flow */
+#define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SynchroMode_Hardware) || \
+ ((MODE) == DCMI_SynchroMode_Embedded))
+/**
+ * @}
+ */
+
+
+/** @defgroup DCMI_PIXCK_Polarity
+ * @{
+ */
+#define DCMI_PCKPolarity_Falling ((uint16_t)0x0000) /*!< Pixel clock active on Falling edge */
+#define DCMI_PCKPolarity_Rising ((uint16_t)0x0020) /*!< Pixel clock active on Rising edge */
+#define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPolarity_Falling) || \
+ ((POLARITY) == DCMI_PCKPolarity_Rising))
+/**
+ * @}
+ */
+
+
+/** @defgroup DCMI_VSYNC_Polarity
+ * @{
+ */
+#define DCMI_VSPolarity_Low ((uint16_t)0x0000) /*!< Vertical synchronization active Low */
+#define DCMI_VSPolarity_High ((uint16_t)0x0080) /*!< Vertical synchronization active High */
+#define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPolarity_Low) || \
+ ((POLARITY) == DCMI_VSPolarity_High))
+/**
+ * @}
+ */
+
+
+/** @defgroup DCMI_HSYNC_Polarity
+ * @{
+ */
+#define DCMI_HSPolarity_Low ((uint16_t)0x0000) /*!< Horizontal synchronization active Low */
+#define DCMI_HSPolarity_High ((uint16_t)0x0040) /*!< Horizontal synchronization active High */
+#define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPolarity_Low) || \
+ ((POLARITY) == DCMI_HSPolarity_High))
+/**
+ * @}
+ */
+
+
+/** @defgroup DCMI_Capture_Rate
+ * @{
+ */
+#define DCMI_CaptureRate_All_Frame ((uint16_t)0x0000) /*!< All frames are captured */
+#define DCMI_CaptureRate_1of2_Frame ((uint16_t)0x0100) /*!< Every alternate frame captured */
+#define DCMI_CaptureRate_1of4_Frame ((uint16_t)0x0200) /*!< One frame in 4 frames captured */
+#define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CaptureRate_All_Frame) || \
+ ((RATE) == DCMI_CaptureRate_1of2_Frame) ||\
+ ((RATE) == DCMI_CaptureRate_1of4_Frame))
+/**
+ * @}
+ */
+
+
+/** @defgroup DCMI_Extended_Data_Mode
+ * @{
+ */
+#define DCMI_ExtendedDataMode_8b ((uint16_t)0x0000) /*!< Interface captures 8-bit data on every pixel clock */
+#define DCMI_ExtendedDataMode_10b ((uint16_t)0x0400) /*!< Interface captures 10-bit data on every pixel clock */
+#define DCMI_ExtendedDataMode_12b ((uint16_t)0x0800) /*!< Interface captures 12-bit data on every pixel clock */
+#define DCMI_ExtendedDataMode_14b ((uint16_t)0x0C00) /*!< Interface captures 14-bit data on every pixel clock */
+#define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_ExtendedDataMode_8b) || \
+ ((DATA) == DCMI_ExtendedDataMode_10b) ||\
+ ((DATA) == DCMI_ExtendedDataMode_12b) ||\
+ ((DATA) == DCMI_ExtendedDataMode_14b))
+/**
+ * @}
+ */
+
+
+/** @defgroup DCMI_interrupt_sources
+ * @{
+ */
+#define DCMI_IT_FRAME ((uint16_t)0x0001)
+#define DCMI_IT_OVF ((uint16_t)0x0002)
+#define DCMI_IT_ERR ((uint16_t)0x0004)
+#define DCMI_IT_VSYNC ((uint16_t)0x0008)
+#define DCMI_IT_LINE ((uint16_t)0x0010)
+#define IS_DCMI_CONFIG_IT(IT) ((((IT) & (uint16_t)0xFFE0) == 0x0000) && ((IT) != 0x0000))
+#define IS_DCMI_GET_IT(IT) (((IT) == DCMI_IT_FRAME) || \
+ ((IT) == DCMI_IT_OVF) || \
+ ((IT) == DCMI_IT_ERR) || \
+ ((IT) == DCMI_IT_VSYNC) || \
+ ((IT) == DCMI_IT_LINE))
+/**
+ * @}
+ */
+
+
+/** @defgroup DCMI_Flags
+ * @{
+ */
+/**
+ * @brief DCMI SR register
+ */
+#define DCMI_FLAG_HSYNC ((uint16_t)0x2001)
+#define DCMI_FLAG_VSYNC ((uint16_t)0x2002)
+#define DCMI_FLAG_FNE ((uint16_t)0x2004)
+/**
+ * @brief DCMI RISR register
+ */
+#define DCMI_FLAG_FRAMERI ((uint16_t)0x0001)
+#define DCMI_FLAG_OVFRI ((uint16_t)0x0002)
+#define DCMI_FLAG_ERRRI ((uint16_t)0x0004)
+#define DCMI_FLAG_VSYNCRI ((uint16_t)0x0008)
+#define DCMI_FLAG_LINERI ((uint16_t)0x0010)
+/**
+ * @brief DCMI MISR register
+ */
+#define DCMI_FLAG_FRAMEMI ((uint16_t)0x1001)
+#define DCMI_FLAG_OVFMI ((uint16_t)0x1002)
+#define DCMI_FLAG_ERRMI ((uint16_t)0x1004)
+#define DCMI_FLAG_VSYNCMI ((uint16_t)0x1008)
+#define DCMI_FLAG_LINEMI ((uint16_t)0x1010)
+#define IS_DCMI_GET_FLAG(FLAG) (((FLAG) == DCMI_FLAG_HSYNC) || \
+ ((FLAG) == DCMI_FLAG_VSYNC) || \
+ ((FLAG) == DCMI_FLAG_FNE) || \
+ ((FLAG) == DCMI_FLAG_FRAMERI) || \
+ ((FLAG) == DCMI_FLAG_OVFRI) || \
+ ((FLAG) == DCMI_FLAG_ERRRI) || \
+ ((FLAG) == DCMI_FLAG_VSYNCRI) || \
+ ((FLAG) == DCMI_FLAG_LINERI) || \
+ ((FLAG) == DCMI_FLAG_FRAMEMI) || \
+ ((FLAG) == DCMI_FLAG_OVFMI) || \
+ ((FLAG) == DCMI_FLAG_ERRMI) || \
+ ((FLAG) == DCMI_FLAG_VSYNCMI) || \
+ ((FLAG) == DCMI_FLAG_LINEMI))
+
+#define IS_DCMI_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFFE0) == 0x0000) && ((FLAG) != 0x0000))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/* Function used to set the DCMI configuration to the default reset state ****/
+void DCMI_DeInit(void);
+
+/* Initialization and Configuration functions *********************************/
+void DCMI_Init(DCMI_InitTypeDef* DCMI_InitStruct);
+void DCMI_StructInit(DCMI_InitTypeDef* DCMI_InitStruct);
+void DCMI_CROPConfig(DCMI_CROPInitTypeDef* DCMI_CROPInitStruct);
+void DCMI_CROPCmd(FunctionalState NewState);
+void DCMI_SetEmbeddedSynchroCodes(DCMI_CodesInitTypeDef* DCMI_CodesInitStruct);
+void DCMI_JPEGCmd(FunctionalState NewState);
+
+/* Image capture functions ****************************************************/
+void DCMI_Cmd(FunctionalState NewState);
+void DCMI_CaptureCmd(FunctionalState NewState);
+uint32_t DCMI_ReadData(void);
+
+/* Interrupts and flags management functions **********************************/
+void DCMI_ITConfig(uint16_t DCMI_IT, FunctionalState NewState);
+FlagStatus DCMI_GetFlagStatus(uint16_t DCMI_FLAG);
+void DCMI_ClearFlag(uint16_t DCMI_FLAG);
+ITStatus DCMI_GetITStatus(uint16_t DCMI_IT);
+void DCMI_ClearITPendingBit(uint16_t DCMI_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_DCMI_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|