Restructure stm32 project

1 files changed, 0 insertions, 300 deletions

diff --git a/src/ds18b20/tm_stm32f4_onewire.h b/src/ds18b20/tm_stm32f4_onewire.h
deleted file mode 100644
index 9b14109..0000000
--- a/src/ds18b20/tm_stm32f4_onewire.h
+++ /dev/null
@@ -1,300 +0,0 @@
-/**

- * @author  Tilen Majerle

- * @email   tilen@majerle.eu

- * @website http://stm32f4-discovery.com

- * @link    http://stm32f4-discovery.com/2014/05/library-12-onewire-library-for-stm43f4xx/

- * @version v2.1

- * @ide     Keil uVision

- * @license GNU GPL v3

- * @brief   Onewire library for STM32F4 devices

- *	

-@verbatim

-   ----------------------------------------------------------------------

-    Copyright (C) Tilen Majerle, 2015

-    

-    This program is free software: you can redistribute it and/or modify

-    it under the terms of the GNU General Public License as published by

-    the Free Software Foundation, either version 3 of the License, or

-    any later version.

-     

-    This program is distributed in the hope that it will be useful,

-    but WITHOUT ANY WARRANTY; without even the implied warranty of

-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

-    GNU General Public License for more details.

-    

-    You should have received a copy of the GNU General Public License

-    along with this program.  If not, see <http://www.gnu.org/licenses/>.

-   ----------------------------------------------------------------------

-@endverbatim

- */

-#ifndef TM_ONEWIRE_H

-#define TM_ONEWIRE_H 210

-

-/* C++ detection */

-#ifdef __cplusplus

-extern C {

-#endif

-

-/**

- * @addtogroup TM_STM32F4xx_Libraries

- * @{

- */

-

-/**

- * @defgroup TM_ONEWIRE

- * @brief    Onewire library for STM32F4 devices - http://stm32f4-discovery.com/2014/05/library-12-onewire-library-for-stm43f4xx/

- * @{

- *

- * As of version 2.0 you can now use more than just one one-wire "port" on STM32F4. This allows you to group devices to separate ports.

- * 

- * Because if you have a loot devices on one port, if one device fail, everything is failed. You can prevent this by use more than just one port.

- *

- * To set your port and pin for OneWire protocol, you can do this when calling @ref TM_OneWire_Init function.

- *

- * \par Changelog

- *

-@verbatim

- Version 2.1

-  - March 10, 2015

-  - Added support for new GPIO library 

-

- Version 2.0

-  - January 04, 2015

-  - New OneWire system

-  - With support for multiple OneWire ports to separate group of devices

-

- Version 1.1

-  - December 06, 2014

-  - Added 8-bit CRC calculation for 1-Wire devices, algorithm from Dallas

- 

- Version 1.0

-  - First release

-@endverbatim

- *

- * \par Dependencies

- *

-@verbatim

- - STM32F4xx

- - STM32F4xx RCC

- - STM32F4xx GPIO

- - TM GPIO

-@endverbatim

- */

-#include "stm32f4xx.h"

-#include "stm32f4xx_rcc.h"

-#include "stm32f4xx_gpio.h"

-

-/**

- * @defgroup TM_ONEWIRE_Macros

- * @brief    Library defines

- * @{

- */

-

-/* Pin settings */

-

-#define ONEWIRE_LOW(structure)			TM_GPIO_ResetBits((structure)->GPIOx, (structure)->GPIO_Pin)

-#define ONEWIRE_HIGH(structure)			TM_GPIO_SetBits((structure)->GPIOx, (structure)->GPIO_Pin)

-#define ONEWIRE_INPUT(structure)		TM_GPIO_SetPinAsInput(structure->GPIOx, (structure)->GPIO_Pin)

-#define ONEWIRE_OUTPUT(structure)		TM_GPIO_SetPinAsOutput(structure->GPIOx, (structure)->GPIO_Pin)

-

-/* OneWire commands */

-#define ONEWIRE_CMD_RSCRATCHPAD			0xBE

-#define ONEWIRE_CMD_WSCRATCHPAD			0x4E

-#define ONEWIRE_CMD_CPYSCRATCHPAD		0x48

-#define ONEWIRE_CMD_RECEEPROM			0xB8

-#define ONEWIRE_CMD_RPWRSUPPLY			0xB4

-#define ONEWIRE_CMD_SEARCHROM			0xF0

-#define ONEWIRE_CMD_READROM				0x33

-#define ONEWIRE_CMD_MATCHROM			0x55

-#define ONEWIRE_CMD_SKIPROM				0xCC

-

-/**

- * @}

- */

- 

-/**

- * @defgroup TM_ONEWIRE_Typedefs

- * @brief    Library Typedefs

- * @{

- */

-

-/**

- * @brief  OneWire working struct

- * @note   Except ROM_NO member, everything is fully private and should not be touched by user

- */

-typedef struct {

-	GPIO_TypeDef* GPIOx;           /*!< GPIOx port to be used for I/O functions */

-	uint16_t GPIO_Pin;             /*!< GPIO Pin to be used for I/O functions */

-	uint8_t LastDiscrepancy;       /*!< Search private */

-	uint8_t LastFamilyDiscrepancy; /*!< Search private */

-	uint8_t LastDeviceFlag;        /*!< Search private */

-	uint8_t ROM_NO[8];             /*!< 8-bytes address of last search device */

-} TM_OneWire_t;

-

-/**

- * @}

- */

-

-/**

- * @defgroup TM_ONEWIRE_Functions

- * @brief    Library Functions

- * @{

- */

-

-/**

- * @brief  Initializes OneWire bus

- * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t empty working onewire structure

- * @param  *Pointer to GPIO port used for onewire channel

- * @param  GPIO_Pin: GPIO Pin on specific GPIOx to be used for onewire channel

- * @retval None

- */

-void TM_OneWire_Init(TM_OneWire_t* OneWireStruct, GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);

-

-/**

- * @brief  Resets OneWire bus

- * 

- * @note   Sends reset command for OneWire

- * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire structure

- * @retval None

- */

-uint8_t TM_OneWire_Reset(TM_OneWire_t* OneWireStruct);

-

-/**

- * @brief  Reads byte from one wire bus

- * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire structure

- * @retval Byte from read operation

- */

-uint8_t TM_OneWire_ReadByte(TM_OneWire_t* OneWireStruct);

-

-/**

- * @brief  Writes byte to bus

- * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire structure

- * @param  byte: 8-bit value to write over OneWire protocol

- * @retval None

- */

-void TM_OneWire_WriteByte(TM_OneWire_t* OneWireStruct, uint8_t byte);

-

-/**

- * @brief  Writes single bit to onewire bus

- * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire structure

- * @param  bit: Bit value to send, 1 or 0

- * @retval None

- */

-void TM_OneWire_WriteBit(TM_OneWire_t* OneWireStruct, uint8_t bit);

-

-/**

- * @brief  Reads single bit from one wire bus

- * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire structure

- * @retval Bit value:

- *            - 0: Bit is low (zero)

- *            - > 0: Bit is high (one)

- */

-uint8_t TM_OneWire_ReadBit(TM_OneWire_t* OneWireStruct);

-

-/**

- * @brief  Searches for OneWire devices on specific Onewire port

- * @note   Not meant for public use. Use @ref TM_OneWire_First and @ref TM_OneWire_Next for this.

- * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire structure where to search

- * @param  Device status:

- *            - 0: No devices detected

- *            - > 0: Device detected

- */

-uint8_t TM_OneWire_Search(TM_OneWire_t* OneWireStruct, uint8_t command);

-

-/**

- * @brief  Resets search states

- * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire where to reset search values

- * @retval None

- */

-void TM_OneWire_ResetSearch(TM_OneWire_t* OneWireStruct);

-

-/**

- * @brief  Starts search, reset states first

- * @note   When you want to search for ALL devices on one onewire port, you should first use this function.

-@verbatim

-/...Initialization before

-status = TM_OneWire_First(&OneWireStruct);

-while (status) {

-	//Save ROM number from device

-	TM_OneWire_GetFullROM(ROM_Array_Pointer);

-	//Check for new device

-	status = TM_OneWire_Next(&OneWireStruct);

-}

-@endverbatim

- * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire where to reset search values

- * @param  Device status:

- *            - 0: No devices detected

- *            - > 0: Device detected

- */

-uint8_t TM_OneWire_First(TM_OneWire_t* OneWireStruct);

-

-/**

- * @brief  Reads next device

- * @note   Use @ref TM_OneWire_First to start searching

- * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire

- * @param  Device status:

- *            - 0: No devices detected any more

- *            - > 0: New device detected

- */

-uint8_t TM_OneWire_Next(TM_OneWire_t* OneWireStruct);

-

-/**

- * @brief  Gets ROM number from device from search

- * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire

- * @param  index: Because each device has 8-bytes long ROm address, you have to call this 8 times, to get ROM bytes from 0 to 7

- * @reetval ROM byte for index (0 to 7) at current found device

- */

-uint8_t TM_OneWire_GetROM(TM_OneWire_t* OneWireStruct, uint8_t index);

-

-/**

- * @brief  Gets all 8 bytes ROM value from device from search

- * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire

- * @param  *firstIndex: Pointer to first location for first byte, other bytes are automatically incremented

- * @retval None

- */

-void TM_OneWire_GetFullROM(TM_OneWire_t* OneWireStruct, uint8_t *firstIndex);

-

-/**

- * @brief  Selects specific slave on bus

- * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire

- * @param  *addr: Pointer to first location of 8-bytes long ROM address

- * @retval None

- */

-void TM_OneWire_Select(TM_OneWire_t* OneWireStruct, uint8_t* addr);

-

-/**

- * @brief  Selects specific slave on bus with pointer address

- * @param  *OneWireStruct: Pointer to @ref TM_OneWire_t working onewire

- * @param  *ROM: Pointer to first byte of ROM address

- * @retval None

- */

-void TM_OneWire_SelectWithPointer(TM_OneWire_t* OneWireStruct, uint8_t* ROM);

-

-/**

- * @brief  Calculates 8-bit CRC for 1-wire devices

- * @param  *addr: Pointer to 8-bit array of data to calculate CRC

- * @param  len: Number of bytes to check

- *

- * @retval Calculated CRC from input data

- */

-uint8_t TM_OneWire_CRC8(uint8_t* addr, uint8_t len);

-

-/**

- * @}

- */

- 

-/**

- * @}

- */

- 

-/**

- * @}

- */

- 

-/* C++ detection */

-#ifdef __cplusplus

-}

-#endif

-

-#endif

-