aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Change startup capacityHEADmasterMatthias P. Braendli2023-05-011-1/+1
|
* Set startup cap to 1650AhMatthias P. Braendli2021-03-211-1/+1
|
* Properly setup CTC mode for timerMatthias P. Braendli2021-02-251-6/+6
| | | | The previous setup was out of spec, and overflowed at 255 instead of 195
* Set startup cap to a conservative 1000AhMatthias P. Braendli2020-10-301-1/+1
|
* Add disjoncteur state messageMatthias P. Braendli2020-10-306-73620/+69
|
* Output Relay stateMatthias P. Braendli2020-05-032-14/+33
|
* Refine thresholdsMatthias P. Braendli2020-05-032-14/+14
|
* Set max cap to 1650 AhMatthias P. Braendli2020-04-261-1/+1
|
* Status LED shows CPU sleepingMatthias P. Braendli2020-04-251-3/+2
|
* Fix loading of EEPROM and As to mAh conversionMatthias P. Braendli2020-04-251-33/+58
|
* Disable DBG by defaultMatthias P. Braendli2020-04-161-0/+2
|
* Check relay toggling functionalityMatthias P. Braendli2020-04-163-428/+2781
|
* MergeMatthias P. Braendli2019-12-301-3/+7
|\
| * Read ADCL before ADCHMatthias P. Braendli2019-12-291-2/+6
| |
| * Set proper ADC reference selectionMatthias P. Braendli2019-12-291-1/+1
| |
* | Add config.hMatthias P. Braendli2019-12-283-1/+31
| |
* | Use explicit enum for battery voltage measurementsMatthias P. Braendli2019-12-281-4/+9
| |
* | Refresh schematic libraryMatthias P. Braendli2019-12-281-13/+13
|/
* Fix LTC2400 readoutMatthias P. Braendli2019-11-194-22/+46
|
* Additional changes in SPIMatthias P. Braendli2019-11-173-15/+19
|
* Add some LTC2400 debugMatthias P. Braendli2019-11-173-8/+8
|
* Replace C11 by 2.2uF instead of 4.7uFMatthias P. Braendli2019-11-173-4/+1
|
* Fix interval calculationMatthias P. Braendli2019-11-172-14/+18
|
* Fix CAPACITY length printMatthias P. Braendli2019-11-172-6/+6
|
* Change type of relay hold time variableMatthias P. Braendli2019-11-171-1/+1
|
* Add debug and wdt reset inside loopMatthias P. Braendli2019-11-171-1/+9
|
* Use correct ISR for timerMatthias P. Braendli2019-11-171-1/+1
|
* Fix fuse settings to use crystal, not ext clockMatthias P. Braendli2019-11-172-3/+6
|
* Add ADC measurementsMatthias P. Braendli2019-11-172-10/+83
|
* Specify MAX232 packageMatthias P. Braendli2019-11-041-1/+1
|
* Add some clarificationsMatthias P. Braendli2019-11-031-24/+41
|
* Add thresholds calculationMatthias P. Braendli2019-11-031-11/+60
|
* Rework timer_t to use microsecondsMatthias P. Braendli2019-11-033-42/+40
|
* Add relay toggle codeMatthias P. Braendli2019-11-037-15/+163
|
* Move timer stuff to commonMatthias P. Braendli2019-11-036-73/+183
|
* system_timer atomicity and integration interval calculationMatthias P. Braendli2019-10-271-42/+56
|
* Print out current_capacityMatthias P. Braendli2019-10-262-14/+45
|
* Add preliminary mAh accumulatorMatthias P. Braendli2019-10-264-28/+70
|
* Add new LTC2400 libraryMatthias P. Braendli2019-10-257-61/+346
|
* Pull in some Arduino code so that libraries are easier to useMatthias P. Braendli2019-10-2411-18/+1615
|
* Add Ampere to back silkscreen and update MPNMatthias P. Braendli2019-10-226-2253/+97454
|
* Correct wrong DCDC inductorMatthias P. Braendli2019-10-227-74525/+1726
|
* sw: rename elf to sw.elfMatthias P. Braendli2019-10-221-2/+2
|
* Minor routing changesMatthias P. Braendli2019-10-221-358/+330
|
* Run DRC and ERCMatthias P. Braendli2019-10-211-0/+23
|
* Change R and C to 0805, improve silkscreenMatthias P. Braendli2019-10-213-4487/+4495
|
* Add minor remarks and comments in swMatthias P. Braendli2019-10-212-1/+5
|
* Add acknowledgementsMatthias P. Braendli2019-10-191-0/+10
|
* Restructure lib, add uartMatthias P. Braendli2019-10-1913-20/+2043
|
* Add watchdogMatthias P. Braendli2019-10-192-8/+23
|
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-19 13:56:11 +0000