Add EDI fragment interleaver

8 files changed, 219 insertions, 16 deletions

diff --git a/src/ConfigParser.h b/src/ConfigParser.h
index 6399cdd..ea48e94 100644
--- a/src/ConfigParser.h
+++ b/src/ConfigParser.h
@@ -3,7 +3,7 @@
    2011, 2012 Her Majesty the Queen in Right of Canada (Communications
    Research Center Canada)
 
-   Copyright (C) 2014
+   Copyright (C) 2016
    Matthias P. Braendli, matthias.braendli@mpb.li
 
     The Configuration parser sets up the ensemble according
@@ -28,8 +28,7 @@
    You should have received a copy of the GNU General Public License
    along with ODR-DabMux.  If not, see <http://www.gnu.org/licenses/>.
 */
-#ifndef __CONFIG_PARSER_H_
-#define __CONFIG_PARSER_H_
+#pragma once
 
 #include <vector>
 #include <string>
@@ -41,5 +40,3 @@
 void parse_ptree(boost::property_tree::ptree& pt,
         std::shared_ptr<dabEnsemble> ensemble);
 
-#endif
-
diff --git a/src/DabMultiplexer.cpp b/src/DabMultiplexer.cpp
index a0c713b..6d3a51e 100644
--- a/src/DabMultiplexer.cpp
+++ b/src/DabMultiplexer.cpp
@@ -181,6 +181,10 @@ void DabMultiplexer::prepare()
             throw e;
         }
     }
+
+    if (edi_conf.interleaver_enabled()) {
+        edi_interleaver.SetLatency(edi_conf.latency_frames);
+    }
 #endif
 
     // Shift ms by 14 to Timestamp level 2, see below in Section TIST
@@ -707,8 +711,13 @@ void DabMultiplexer::mux_frame(std::vector<std::shared_ptr<DabOutput> >& outputs
 
         if (edi_conf.enable_pft) {
             // Apply PFT layer to AF Packet (Reed Solomon FEC and Fragmentation)
-            vector< edi::PFTFragment > edi_fragments =
-                edi_pft.Assemble(edi_afpacket);
+            vector<edi::PFTFragment> edi_fragments = edi_pft.Assemble(edi_afpacket);
+
+            if (edi_conf.interleaver_enabled()) {
+                edi_interleaver.PushFragments(edi_fragments);
+
+                edi_fragments = edi_interleaver.Interleave();
+            }
 
             // Send over ethernet
             for (const auto& edi_frag : edi_fragments) {
diff --git a/src/DabMultiplexer.h b/src/DabMultiplexer.h
index e2a94f5..b3e432e 100644
--- a/src/DabMultiplexer.h
+++ b/src/DabMultiplexer.h
@@ -23,8 +23,7 @@
    along with ODR-DabMux.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef __DAB_MULTIPLEXER_H__
-#define __DAB_MULTIPLEXER_H__
+#pragma once
 
 #ifdef HAVE_CONFIG_H
 #   include "config.h"
@@ -35,6 +34,7 @@
 #include "dabOutput/edi/TagPacket.h"
 #include "dabOutput/edi/AFPacket.h"
 #include "dabOutput/edi/PFT.h"
+#include "dabOutput/edi/Interleaver.h"
 #include "fig/FIGCarousel.h"
 #include "crc.h"
 #include "utils.h"
@@ -102,6 +102,9 @@ class DabMultiplexer : public RemoteControllable {
 
         // The AF Packet will be protected with reed-solomon and split in fragments
         edi::PFT edi_pft;
+
+        // To mitigate for burst packet loss, PFT fragments can be sent out-of-order
+        edi::Interleaver edi_interleaver;
 #endif // HAVE_OUTPUT_EDI
 
         /* New FIG Carousel */
@@ -130,5 +133,3 @@ class DabMultiplexer : public RemoteControllable {
 #define DEFAULT_SERVICE_ID      50
 #define DEFAULT_PACKET_ADDRESS  0
 
-#endif
-
diff --git a/src/DabMux.cpp b/src/DabMux.cpp
index 04d1980..450179d 100644
--- a/src/DabMux.cpp
+++ b/src/DabMux.cpp
@@ -98,10 +98,6 @@ typedef DWORD32 uint32_t;
 #include "input/Zmq.h"
 
 #include "dabOutput/dabOutput.h"
-#include "dabOutput/edi/TagItems.h"
-#include "dabOutput/edi/TagPacket.h"
-#include "dabOutput/edi/AFPacket.h"
-#include "dabOutput/edi/PFT.h"
 #include "crc.h"
 #include "UdpSocket.h"
 #include "InetAddress.h"
@@ -311,6 +307,20 @@ int main(int argc, char *argv[])
                 edi_conf.fec                 = pt_edi.get<unsigned int>("fec", 3);
                 edi_conf.chunk_len           = pt_edi.get<unsigned int>("chunk_len", 207);
 
+                double interleave_ms         = pt_edi.get<double>("interleave", 0);
+                if (interleave_ms != 0.0) {
+                    if (interleave_ms < 0) {
+                        throw runtime_error("EDI output: negative interleave value is invalid.");
+                    }
+
+                    auto latency_rounded = lround(interleave_ms / 24.0);
+                    if (latency_rounded * 24 > 30000) {
+                        throw runtime_error("EDI output: interleaving set for more than 30 seconds!");
+                    }
+
+                    edi_conf.latency_frames = latency_rounded;
+                }
+
                 edi_conf.tagpacket_alignment = pt_edi.get<unsigned int>("tagpacket_alignment", 8);
 
                 mux.set_edi_config(edi_conf);
@@ -417,6 +427,9 @@ int main(int argc, char *argv[])
                 }
                 etiLog.level(info) << "  source port " << edi_dest.source_port;
             }
+            if (edi_conf.interleaver_enabled()) {
+                etiLog.level(info) << " interleave     " << edi_conf.latency_frames * 24 << " ms";
+            }
         }
 #endif
 
diff --git a/src/Makefile.am b/src/Makefile.am
index de2aa37..0d1c454 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -64,6 +64,7 @@ odr_dabmux_SOURCES  =DabMux.cpp DabMux.h \
 					 dabOutput/edi/TagItems.cpp dabOutput/edi/TagItems.h \
 					 dabOutput/edi/TagPacket.cpp dabOutput/edi/TagPacket.h \
 					 dabOutput/edi/PFT.cpp dabOutput/edi/PFT.h \
+					 dabOutput/edi/Interleaver.cpp dabOutput/edi/Interleaver.h \
 					 ClockTAI.h ClockTAI.cpp \
 					 ConfigParser.cpp ConfigParser.h \
 					 Eti.h Eti.cpp \
diff --git a/src/dabOutput/dabOutput.h b/src/dabOutput/dabOutput.h
index a023da9..11b78e6 100644
--- a/src/dabOutput/dabOutput.h
+++ b/src/dabOutput/dabOutput.h
@@ -69,8 +69,10 @@ struct edi_configuration_t {
     unsigned int tagpacket_alignment;
     std::vector<edi_destination_t> destinations;
     unsigned int dest_port; // common destination port, because it's encoded in the transport layer
+    unsigned int latency_frames; // if nonzero, enable interleaver with a latency of latency_frames * 24ms
 
-    bool enabled() { return destinations.size() > 0; }
+    bool enabled() const { return destinations.size() > 0; }
+    bool interleaver_enabled() const { return latency_frames > 0; }
 };
 
 
diff --git a/src/dabOutput/edi/Interleaver.cpp b/src/dabOutput/edi/Interleaver.cpp
new file mode 100644
index 0000000..ab3a5fc
--- /dev/null
+++ b/src/dabOutput/edi/Interleaver.cpp
@@ -0,0 +1,114 @@
+/*
+   Copyright (C) 2016
+   Matthias P. Braendli, matthias.braendli@mpb.li
+
+    http://www.opendigitalradio.org
+
+   EDI output,
+   Interleaving of PFT fragments to increase robustness against
+   burst packet loss.
+
+   This is possible because EDI has to assume that fragments may reach
+   the receiver out of order.
+
+   */
+/*
+   This file is part of ODR-DabMux.
+
+   ODR-DabMux is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as
+   published by the Free Software Foundation, either version 3 of the
+   License, or (at your option) any later version.
+
+   ODR-DabMux is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with ODR-DabMux.  If not, see <http://www.gnu.org/licenses/>.
+   */
+
+#include "Interleaver.h"
+
+namespace edi {
+
+void Interleaver::SetLatency(size_t latency_frames)
+{
+    m_latency = latency_frames;
+}
+
+void Interleaver::PushFragments(const std::vector<PFTFragment> &fragments)
+{
+    // Create vectors containing Fcount*latency fragments in total
+    // and store them into the deque
+    if (m_buffer.empty()) {
+        m_buffer.push_back(fragments);
+    }
+    else {
+        auto& last_buffer = m_buffer.back();
+
+        const bool last_buffer_is_complete =
+                (last_buffer.size() >= m_fragment_count * m_latency);
+
+        if (last_buffer_is_complete) {
+            m_buffer.push_back(fragments);
+        }
+        else {
+            std::copy(fragments.begin(), fragments.end(),
+                    std::back_inserter(last_buffer));
+        }
+    }
+
+    m_fragment_count = fragments.size();
+}
+
+std::vector<PFTFragment> Interleaver::Interleave()
+{
+    std::vector<PFTFragment> fragments;
+
+    while ( not m_buffer.empty() and
+            (m_buffer.front().size() >= m_fragment_count * m_latency)) {
+
+        auto& first_buffer = m_buffer.front();
+
+        assert(first_buffer.size() == m_fragment_count * m_latency);
+
+        /* Assume we have 5 fragments per AF frame, and latency of 3.
+         * This will give the following strides:
+         *    0        1     2
+         * +-------+-------+---+
+         * | 0   1 | 2   3 | 4 |
+         * |       |   +---+   |
+         * | 5   6 | 7 | 8   9 |
+         * |   +---+   |       |
+         * |10 |11  12 |13  14 |
+         * +---+-------+-------+
+         *
+         * ix will be 0, 5, 10, 1, 6 in the first loop
+         */
+
+        for (size_t i = 0; i < m_fragment_count; i++) {
+            const size_t ix = m_interleave_offset + m_fragment_count * m_stride;
+            fragments.push_back(first_buffer.at(ix));
+
+            m_stride += 1;
+            if (m_stride >= m_latency) {
+                m_interleave_offset++;
+                m_stride = 0;
+            }
+        }
+
+        if (m_interleave_offset >= m_fragment_count) {
+            m_interleave_offset = 0;
+            m_stride = 0;
+            m_buffer.pop_front();
+        }
+    }
+
+    return fragments;
+}
+
+}
+
+
diff --git a/src/dabOutput/edi/Interleaver.h b/src/dabOutput/edi/Interleaver.h
new file mode 100644
index 0000000..1a2e26d
--- /dev/null
+++ b/src/dabOutput/edi/Interleaver.h
@@ -0,0 +1,66 @@
+/*
+   Copyright (C) 2016
+   Matthias P. Braendli, matthias.braendli@mpb.li
+
+    http://www.opendigitalradio.org
+
+   EDI output,
+   Interleaving of PFT fragments to increase robustness against
+   burst packet loss.
+
+   This is possible because EDI has to assume that fragments may reach
+   the receiver out of order.
+
+   */
+/*
+   This file is part of ODR-DabMux.
+
+   ODR-DabMux is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as
+   published by the Free Software Foundation, either version 3 of the
+   License, or (at your option) any later version.
+
+   ODR-DabMux is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with ODR-DabMux.  If not, see <http://www.gnu.org/licenses/>.
+   */
+
+#pragma once
+
+#include "config.h"
+#include <vector>
+#include <deque>
+#include <stdexcept>
+#include <stdint.h>
+#include "Log.h"
+#include "PFT.h"
+
+namespace edi {
+
+class Interleaver {
+    public:
+        /* Configure the interleaver to use latency_frames number of AF
+         * packets for interleaving. Total delay through the interleaver
+         * will be latency_frames * 24ms
+         */
+        void SetLatency(size_t latency_frames);
+
+        /* Push the fragments for an AF Packet into the interleaver */
+        void PushFragments(const std::vector< PFTFragment > &fragments);
+
+        std::vector< PFTFragment > Interleave(void);
+
+    private:
+        size_t m_latency = 0;
+        size_t m_fragment_count = 0;
+        size_t m_interleave_offset = 0;
+        size_t m_stride = 0;
+        std::deque<std::vector<PFTFragment> > m_buffer;
+};
+
+}
+