aboutsummaryrefslogtreecommitdiffstats
path: root/doc
diff options
context:
space:
mode:
authorMatthias P. Braendli <matthias.braendli@mpb.li>2016-02-05 12:12:02 +0100
committerMatthias P. Braendli <matthias.braendli@mpb.li>2016-02-05 12:12:02 +0100
commit90cb5392cd7f6f623529d62988bc4afdde011820 (patch)
tree6f2d4b57c64d6f2023e92913aaa179d0eadc3e92 /doc
parentc21be14dd5cb7b8aa338c3eecd87fc996e1f5430 (diff)
downloaddabmux-90cb5392cd7f6f623529d62988bc4afdde011820.tar.gz
dabmux-90cb5392cd7f6f623529d62988bc4afdde011820.tar.bz2
dabmux-90cb5392cd7f6f623529d62988bc4afdde011820.zip
Change EDI configuration for multi-output
Diffstat (limited to 'doc')
-rw-r--r--doc/example.mux40
1 files changed, 26 insertions, 14 deletions
diff --git a/doc/example.mux b/doc/example.mux
index 456e046..82c5685 100644
--- a/doc/example.mux
+++ b/doc/example.mux
@@ -321,22 +321,34 @@ outputs {
; The edi output has a different syntax
edi {
- ; example for unicast EDI
- ;destination "192.168.23.23"
- ; for unicast EDI, do not set source
-
- ; example for multicast EDI, the source IP is required
- ; so that the data is sent on the correct ethernet interface
- destination "232.20.10.1"
- source "192.168.0.50"
- ; The multicast TTL has to be adapted according to your network
- ttl 1
-
- ; The settings below apply to both unicast and multicast
-
; EDI uses the UDP protocol
+ destinations {
+ ; The names you give to the destinations have no meaning,
+ ; but have to be unique. You can give them meaningful names to help
+ ; you identify the outputs.
+ example_unicast {
+ ; example for unicast EDI
+ ; for unicast EDI, do not set source
+ destination "192.168.23.23"
+ sourceport 13000
+ }
+ example_multicast {
+ ; example for multicast EDI, the source IP is required
+ ; so that the data is sent on the correct ethernet interface
+ destination "232.20.10.1"
+ source "192.168.0.50"
+ ; The multicast TTL has to be adapted according to your network
+ ttl 1
+
+ sourceport 13000
+ }
+ }
+
+ ; The settings below apply to all destinations
+ ; The destination port cannot be set independently for
+ ; different outputs because it is encoded in the transport
+ ; header of the PFT layer.
port 12000
- sourceport 13000
; Enable the PFT subsystem. If false, AFPackets are sent.
enable_pft true