aboutsummaryrefslogtreecommitdiffstats
path: root/src/DabMod.cpp
diff options
context:
space:
mode:
Diffstat (limited to 'src/DabMod.cpp')
-rw-r--r--src/DabMod.cpp107
1 files changed, 89 insertions, 18 deletions
diff --git a/src/DabMod.cpp b/src/DabMod.cpp
index ea6334f..4912bee 100644
--- a/src/DabMod.cpp
+++ b/src/DabMod.cpp
@@ -38,6 +38,7 @@
#if defined(HAVE_OUTPUT_UHD)
# include "OutputUHD.h"
#endif
+#include "OutputZeroMQ.h"
#include "InputReader.h"
#include "PcDebug.h"
#include "TimestampDecoder.h"
@@ -56,11 +57,11 @@
#include <stdexcept>
#include <signal.h>
-#ifdef HAVE_NETINET_IN_H
+#if HAVE_NETINET_IN_H
# include <netinet/in.h>
#endif
-#ifdef HAVE_DECL__MM_MALLOC
+#if HAVE_DECL__MM_MALLOC
# include <mm_malloc.h>
#else
# define memalign(a, b) malloc(b)
@@ -91,11 +92,11 @@ void printUsage(char* progName, FILE* out = stderr)
#endif
__DATE__, __TIME__);
fprintf(out, "Usage with configuration file:\n");
- fprintf(out, "\t%s -C config_file.ini\n\n", progName);
+ fprintf(out, "\t%s [-C] config_file.ini\n\n", progName);
fprintf(out, "Usage with command line options:\n");
fprintf(out, "\t%s"
- " [input]"
+ " input"
" (-f filename | -u uhddevice -F frequency) "
" [-G txgain]"
" [-o offset]"
@@ -137,8 +138,13 @@ void printVersion(FILE *out = stderr)
{
fprintf(out, "Welcome to %s %s, compiled at %s, %s\n\n",
PACKAGE, VERSION, __DATE__, __TIME__);
- fprintf(out, "ODR-DabMod is copyright (C) Her Majesty the Queen in Right of Canada,\n"
- " 2009, 2010, 2011, 2012 Communications Research Centre (CRC).\n"
+ fprintf(out,
+ " ODR-DabMod is copyright (C) Her Majesty the Queen in Right of Canada,\n"
+ " 2009, 2010, 2011, 2012 Communications Research Centre (CRC),\n"
+ " and\n"
+ " Copyright (C) 2014 Matthias P. Braendli, matthias.braendli@mpb.li\n"
+ "\n"
+ " http://opendigitalradio.org\n"
"\n"
" This program is available free of charge and is licensed to you on a\n"
" non-exclusive basis; you may not redistribute it.\n"
@@ -151,8 +157,10 @@ void printVersion(FILE *out = stderr)
" In no event shall CRC be LIABLE for any LOSS, DAMAGE or COST that may be\n"
" incurred in connection with the use of this software.\n"
"\n"
+#if USE_KISS_FFT
"ODR-DabMod makes use of the following open source packages:\n"
" Kiss FFT v1.2.9 (Revised BSD) - http://kissfft.sourceforge.net/\n"
+#endif
);
}
@@ -166,6 +174,7 @@ int main(int argc, char* argv[])
std::string inputTransport = "file";
std::string outputName;
+ int useZeroMQOutput = 0;
int useFileOutput = 0;
int useUHDOutput = 0;
@@ -257,7 +266,7 @@ int main(int argc, char* argv[])
break;
case 'G':
#if defined(HAVE_OUTPUT_UHD)
- outputuhd_conf.txgain = (int)strtol(optarg, NULL, 10);
+ outputuhd_conf.txgain = strtod(optarg, NULL);
#endif
break;
case 'l':
@@ -330,11 +339,47 @@ int main(int argc, char* argv[])
#endif
<< std::endl;
+ std::cerr << "Using FFT library " <<
+#if defined(USE_FFTW)
+ "FFTW" <<
+#endif
+#if defined(USE_KISS_FFT)
+ "Kiss FFT" <<
+#endif
+#if defined(USE_SIMD)
+ " (with fft_simd)" <<
+#endif
+ "\n";
+
+ std::cerr << "Compiled with features: " <<
+#if defined(HAVE_INPUT_ZEROMQ)
+ "input_zeromq " <<
+#endif
+#if defined(HAVE_OUTPUT_UHD)
+ "output_uhd " <<
+#endif
+#if defined(HAVE_OUTPUT_ZEROMQ)
+ "output_zeromq " <<
+#endif
+ "\n";
+
if (use_configuration_file && use_configuration_cmdline) {
fprintf(stderr, "Warning: configuration file and command line parameters are defined:\n\t"
"Command line parameters override settings in the configuration file !\n");
}
+ // No argument given ? You can't be serious ! Show usage.
+ if (argc == 1) {
+ printUsage(argv[0]);
+ goto END_MAIN;
+ }
+
+ // If only one argument is given, interpret as configuration file name
+ if (argc == 2) {
+ use_configuration_file = true;
+ configuration_file = argv[1];
+ }
+
if (use_configuration_file) {
// First read parameters from the file
using boost::property_tree::ptree;
@@ -415,7 +460,7 @@ int main(int argc, char* argv[])
clockRate = pt.get("modulator.dac_clk_rate", (size_t)0);
digitalgain = pt.get("modulator.digital_gain", digitalgain);
outputRate = pt.get("modulator.rate", outputRate);
-
+
// FIR Filter parameters:
if (pt.get("firfilter.enabled", 0) == 1) {
try {
@@ -467,7 +512,7 @@ int main(int argc, char* argv[])
"setting type in [uhd] device is deprecated !\n";
}
- outputuhd_conf.txgain = pt.get("uhdoutput.txgain", 0);
+ outputuhd_conf.txgain = pt.get("uhdoutput.txgain", 0.0);
outputuhd_conf.frequency = pt.get<double>("uhdoutput.frequency", 0);
std::string chan = pt.get<std::string>("uhdoutput.channel", "");
@@ -547,6 +592,12 @@ int main(int argc, char* argv[])
useUHDOutput = 1;
}
#endif
+#if defined(HAVE_OUTPUT_ZEROMQ)
+ else if (output_selected == "zmq") {
+ outputName = pt.get<std::string>("zmqoutput.listen");
+ useZeroMQOutput = 1;
+ }
+#endif
else {
std::cerr << "Error: Invalid output defined.\n";
goto END_MAIN;
@@ -579,6 +630,7 @@ int main(int argc, char* argv[])
outputuhd_conf.muteNoTimestamps = (pt.get("delaymanagement.mutenotimestamps", 0) == 1);
#endif
}
+
if (rcs.get_no_controllers() == 0) {
logger.level(warn) << "No Remote-Control started";
rcs.add_controller(new RemoteControllerDummy());
@@ -600,7 +652,7 @@ int main(int argc, char* argv[])
}
// Setting ETI input filename
- if (inputName == "") {
+ if (use_configuration_cmdline && inputName == "") {
if (optind < argc) {
inputName = argv[optind++];
@@ -616,7 +668,7 @@ int main(int argc, char* argv[])
}
// Checking unused arguments
- if (optind != argc) {
+ if (use_configuration_cmdline && optind != argc) {
fprintf(stderr, "Invalid arguments:");
while (optind != argc) {
fprintf(stderr, " %s", argv[optind++]);
@@ -628,7 +680,7 @@ int main(int argc, char* argv[])
goto END_MAIN;
}
- if (!useFileOutput && !useUHDOutput) {
+ if (!useFileOutput && !useUHDOutput && !useZeroMQOutput) {
logger.level(error) << "Output not specified";
fprintf(stderr, "Must specify output !");
goto END_MAIN;
@@ -639,8 +691,12 @@ int main(int argc, char* argv[])
fprintf(stderr, " Type: %s\n", inputTransport.c_str());
fprintf(stderr, " Source: %s\n", inputName.c_str());
fprintf(stderr, "Output\n");
+
+ if (useFileOutput) {
+ fprintf(stderr, " Name: %s\n", outputName.c_str());
+ }
#if defined(HAVE_OUTPUT_UHD)
- if (useUHDOutput) {
+ else if (useUHDOutput) {
fprintf(stderr, " UHD\n"
" Device: %s\n"
" Type: %s\n"
@@ -649,12 +705,13 @@ int main(int argc, char* argv[])
outputuhd_conf.usrpType.c_str(),
outputuhd_conf.masterClockRate);
}
- else if (useFileOutput) {
-#else
- if (useFileOutput) {
#endif
- fprintf(stderr, " Name: %s\n", outputName.c_str());
+ else if (useZeroMQOutput) {
+ fprintf(stderr, " ZeroMQ\n"
+ " Listening on: %s\n",
+ outputName.c_str());
}
+
fprintf(stderr, " Sampling rate: ");
if (outputRate > 1000) {
if (outputRate > 1000000) {
@@ -683,7 +740,13 @@ int main(int argc, char* argv[])
ret = -1;
goto END_MAIN;
#else
- inputZeroMQReader.Open(inputName.substr(4));
+ // The URL might start with zmq+tcp://
+ if (inputName.substr(0, 4) == "zmq+") {
+ inputZeroMQReader.Open(inputName.substr(4));
+ }
+ else {
+ inputZeroMQReader.Open(inputName);
+ }
inputReader = &inputZeroMQReader;
#endif
}
@@ -723,6 +786,14 @@ int main(int argc, char* argv[])
}
}
#endif
+#if defined(HAVE_OUTPUT_ZEROMQ)
+ else if (useZeroMQOutput) {
+ /* We normalise the same way as for the UHD output */
+ normalise = 1.0f/50000.0f;
+
+ output = new OutputZeroMQ(outputName);
+ }
+#endif
flowgraph = new Flowgraph();
data.setLength(6144);
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-21 11:05:30 +0000