diff options
| author | Matthias P. Braendli <matthias.braendli@mpb.li> | 2017-12-24 04:06:10 +0100 |
|---|---|---|
| committer | Matthias P. Braendli <matthias.braendli@mpb.li> | 2017-12-24 04:06:10 +0100 |
| commit | 626cfba78e2885200450ff8b4f4cf09ff6d0b830 (patch) | |
| tree | 8c99d6ec4af5dbd68b3e0ab27700562227b47b1b /doc | |
| parent | 215e8143e3feefd69a76d0b6eaf36ed42a7a904f (diff) | |
| download | dabmod-626cfba78e2885200450ff8b4f4cf09ff6d0b830.tar.gz dabmod-626cfba78e2885200450ff8b4f4cf09ff6d0b830.tar.bz2 dabmod-626cfba78e2885200450ff8b4f4cf09ff6d0b830.zip | |
Fix TII insertion for positive frequency carriers
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/example.ini | 8 |
1 files changed, 6 insertions, 2 deletions
diff --git a/doc/example.ini b/doc/example.ini index d356ee1..ec0525c 100644 --- a/doc/example.ini +++ b/doc/example.ini @@ -318,8 +318,12 @@ offset=0.002 ; DAB modes I and II are supported, and must be set explicitly in ; this file. Reading DAB mode from ETI is not supported. enable=0 -comb=16 -pattern=3 +; comb is also known as sub-identifier. +comb=1 +; pattern is also known as main-identifier. If you run several transmitters +; in SFN, it is better to use the same pattern for all, and vary the comb. +; Otherwise identification of the transmitters may be more difficult. +pattern=11 ; There are two variants of TII being used. The old variant that uses the wrong ; phase on the second carrier in each carrier pairs and is therefore not ; conforming to the specification. Modern analysers can decode both variants, |