From 626cfba78e2885200450ff8b4f4cf09ff6d0b830 Mon Sep 17 00:00:00 2001 From: "Matthias P. Braendli" Date: Sun, 24 Dec 2017 04:06:10 +0100 Subject: Fix TII insertion for positive frequency carriers --- doc/example.ini | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'doc') diff --git a/doc/example.ini b/doc/example.ini index d356ee1..ec0525c 100644 --- a/doc/example.ini +++ b/doc/example.ini @@ -318,8 +318,12 @@ offset=0.002 ; DAB modes I and II are supported, and must be set explicitly in ; this file. Reading DAB mode from ETI is not supported. enable=0 -comb=16 -pattern=3 +; comb is also known as sub-identifier. +comb=1 +; pattern is also known as main-identifier. If you run several transmitters +; in SFN, it is better to use the same pattern for all, and vary the comb. +; Otherwise identification of the transmitters may be more difficult. +pattern=11 ; There are two variants of TII being used. The old variant that uses the wrong ; phase on the second carrier in each carrier pairs and is therefore not ; conforming to the specification. Modern analysers can decode both variants, -- cgit v1.2.3