Welcome Supervisor

1 files changed, 342 insertions, 0 deletions

diff --git a/config/mux.conf b/config/mux.conf
new file mode 100644
index 0000000..0fec378
--- /dev/null
+++ b/config/mux.conf
@@ -0,0 +1,342 @@
+; This is the official configuration file example that
+; serves as documentation for the config file reader.
+; More information about the usage of the tools is available
+; in the guide, which can be found on the
+; www.opendigitalradio.org website.
+;
+; As you can see, comments are defined by semicolons.
+;
+; The format is called INFO format, and defined by boost property_tree:
+; http://www.boost.org/doc/libs/1_41_0/doc/html/boost_propertytree/parsers.html#boost_propertytree.parsers.info_parser
+
+; It consists of six mandatory sections, whose relative order in this
+; file are of no importance.
+
+; The general section defines global multiplex parameters.
+general {
+    ; the DAB Transmission mode (values 1-4 accepted)
+    dabmode 1
+
+    ; the number of ETI frames to generate (set to 0 to get an unlimited number)
+    nbframes 0
+
+    ; boolean fileds can accept either false or true as values:
+
+    ; Enable logging to syslog
+    syslog false
+
+    ; Write the SCCA field useful for the Factum ETI analyser
+    writescca false
+
+    ; Enable timestamp definition necessary for SFN
+    ; This also enables time encoding using the MNSC.
+    tist false
+
+    ; The management server is a simple TCP server that can present
+    ; statistics data (buffers, overruns, underruns, etc)
+    ; which can then be graphed a tool like Munin
+    ; The doc/stats_dabmux_multi.py tool is a suitable
+    ; plugin for that.
+    ; If the port is zero, or the line commented, the server
+    ; is not started.
+    managementport 12720
+
+    ; FIG Carousel
+    ; Set this to true to use the new FIG carousel implementation,
+    ; which makes better usage of the FIB space.
+    new_fig_carousel false
+}
+
+remotecontrol {
+    ; enable the telnet remote control server on the given port
+    ; This server allows you to read and define parameters that
+    ; some features export. It is only accessible from localhost.
+    ; Set the port to 0 to disable the server
+    telnetport 12721
+
+    ; the remote control server makes use of the unique identifiers
+    ; for the subchannels, services and components. Make sure you
+    ; chose them so that you can identify them.
+}
+
+; Some ensemble parameters
+ensemble {
+    id 0x4fff ; you can also use decimal if you want
+    ecc 0xec ; Extended Country Code
+
+    local-time-offset auto  ; autmatically calculate from system local time
+                            ; or
+    ;local-time-offset 1    ; in hours, supports half-hour offsets
+
+    international-table 1 ; See TS 101 756 clause 5.7
+                          ; 1 corresponds to the PTy used in RDS
+                          ; 2 corresponds to program types used in north america
+
+    ; all labels are maximum 16 characters in length
+    label "TuxMux"
+    ; The short label is built from the label by erasing letters, and cannot
+    ; be longer than 8 characters. If omitted, it will be truncated from the
+    ; label
+    shortlabel "TxMux"
+
+    ; Announcement settings for FIG0/19
+    announcements {
+        test_announcement {
+            cluster 1
+            flags {
+                Traffic true
+            }
+
+            subchannel sub-f3
+        }
+    }
+}
+
+; Definition of DAB services
+services {
+    ; Each service has it's own unique identifier, that is
+    ; used throughout the configuration file and for the RC.
+    srv-f3 {
+        label "Frequence3"
+        shortlabel "F3"
+        pty 0
+        language 0
+        ; also supports id
+
+        ; List of announcement switching flags signalled in FIG 0/18
+        ; This lists all possible announcements. If one is left out, it is disabled.
+        announcements {
+            Alarm false
+            Traffic true
+            Travel false
+            Warning false
+            News false
+            Weather false
+            Event false
+            Special false
+            ProgrammeInfo false
+            Sports false
+            Finance false
+
+            ; a comma separated list of clusters in which the service belongs to
+            clusters "1,2"
+        }
+    }
+    srv-maxxima {
+        label "Maxxima"
+    }
+    srv-fip {
+        label "FIP"
+    }
+    srv-bbc1 {
+        label "BBC1"
+    }
+
+}
+
+; The subchannels are defined in the corresponding section.
+; supported types are : audio, bridge, data, enhancedpacket,
+;                       dabplus, dmb, packet, test
+subchannels {
+    sub-f3 {
+        type dabplus
+        inputfile "tcp://*:9001"
+        bitrate 96
+        id 1
+
+        ; type audio subchannels automatically use
+        ; UEP, unless the bitrate is 8, 16, 24, 40 or 144kbit/s
+        ; (EN 300 401 Clause 6.2.1)
+        ; this can be overridden with the option protection-profile
+        protection-profile EEP_A
+        ; supported options: UEP (use only for type audio!)
+        ;                    EEP_A (for all bitrates)
+        ;                    EEP_B (bitrates multiple of 32kbit/s)
+
+        ; Set the protection level, possible values depend
+        ; on the protection profile:
+        ; UEP profile: 1 to 5; EEP profiles: 1 to 4
+        protection 2
+    }
+    sub-maxxima {
+        type dabplus
+	inputfile "tcp://*:9002"
+        bitrate 96
+        id 2
+	protection-profile EEP_A
+        protection 2
+    }
+    sub-fip {
+        type dabplus
+        inputfile "tcp://*:9003"
+        bitrate 96
+        id 3
+	protection-profile EEP_A
+        protection 3
+
+        ; ZMQ specific options, mandatory:
+
+        ; Maximum size of input buffer, in AAC frames (24ms)
+        ; when this buffer size is reached, some frames will be
+        ; discarded to get the size again below this value.
+        ; As the present implementation discards entire AAC superframes,
+        ; (5 frames = 120ms) the effect will clearly be audible.
+        zmq-buffer 40
+
+        ; At startup or after an underrun, the buffer is filled to this
+        ; amount of AAC frames before streaming starts.
+        zmq-prebuffering 20
+    }
+
+    sub-bbc1 {
+        type audio
+        ; for audio types, you can use the ZeroMQ input (if compiled in)
+        ; with the following configuration in combination with
+        ; toolame-dab
+        ;
+        ; Support for toolame-dab is not as good as with fdk-aac-dabplus
+        inputfile "tcp://*:9004"
+        bitrate 128
+        id 4
+        protection 1
+
+        ; The options are the same as for dabplus
+        zmq-buffer 40
+        zmq-prebuffering 20
+    }
+}
+
+; For now, each component links one service to one subchannel
+components {
+    ; the component unique identifiers are used for the RC.
+    comp-f3 {
+        ; specifies audio -or- packet type, defaults to zero when not given
+        ; audio: foreground=0, background=1, multi-channel=2
+        ; data: unspecified=0, TMC=1, EWS=2, ITTS=3, paging=4, TDC=5, IP=59, MOT=60, proprietary=61
+        type 0
+
+        ; According to specification, you should not define component labels if
+        ; the service is only used in one component. The service label is sufficient
+        ; in that case.
+        ;label "Frequence3"
+        ;shortlabel "F3"
+        service srv-f3
+        subchannel sub-f3
+
+        ; for audio components, the field
+        figtype 0x2
+        ; defines the User Application Type according to TS 101 756 Table 16:
+        ; 0x2   : MOT Slideshow
+        ; 0x3   : MOT Broadcast Web Site
+        ; 0x4   : TPEG
+        ; 0x5   : DGPS
+        ; 0x6   : TMC
+        ; 0x7   : EPG
+        ; 0x8   : DAB Java
+        ; 0x44a : Journaline
+        ; If not defined, the FIG 0/13 is not transmitted for this component
+
+        ; for packet components, the fields
+        ; "user application type in FIG 0/13 for packet mode"
+        ;figtype
+        ; and the packet address (mandatory)
+        ;address
+        ; are supported, with the same syntax as in the manpage.
+        ; FIG 0/13 is only transmitted when figtype is defined.
+        ; The -d option on the command line is:
+        ;datagroup (true|false)
+        ; and defaults to false.
+    }
+
+    comp-maxxima {
+        service srv-maxxima
+        subchannel sub-maxxima
+
+        figtype 0x2
+    }
+
+    comp-fip {
+        service srv-fip
+        subchannel sub-fip
+
+        figtype 0x2
+    }
+
+    comp-bbc1 {
+        service srv-bbc1
+        subchannel sub-bcc1
+
+        figtype 0x2
+    }
+}
+
+; A list of outputs, in the format
+; unique-id "uri"
+outputs {
+    ; The unique-id has no signification. It can be used by the
+    ; remote control or the statistics server to identify the
+    ; output
+
+    ;supported output types for file and fifo outputs are
+    ; raw, framed and streamed
+    ;
+    ; Please see doc/dab_output_formats.txt
+    ;stdout "fifo:///dev/stdout?type=raw"
+
+    ; ZeroMQ output example
+    ; Listen on all interfaces, on port 9050
+    zmq  "zmq+tcp://*:9050"
+
+    ; Throttle output to real-time (one ETI frame every 24ms)
+    throttle "simul://"
+
+    ; The edi output has a different syntax
+    ;edi {
+    ;    ; example for unicast EDI
+    ;    ;destination "192.168.23.23"
+    ;    ; for unicast EDI, do not set source
+
+    ;    ; example for multicast EDI, the source IP is required
+    ;   ; so that the data is sent on the correct ethernet interface
+    ;   destination "232.20.10.1"
+    ;   source      "192.168.0.50"
+    ;   ; The multicast TTL has to be adapted according to your network
+    ;   ttl 1
+
+    ;   ; The settings below apply to both unicast and multicast
+
+    ;   ; EDI uses the UDP protocol
+    ;   port        12000
+    ;   sourceport  13000
+
+    ;   ; Enable the PFT subsystem. If false, AFPackets are sent.
+    ;   enable_pft  true
+
+    ;   ; How many lost fragments can be recovered by Reed-Solomon
+    ;   fec         2
+
+    ;   ; Length of a RS chunk, can be overriden
+    ;   ;default=207
+    ;   ;chunk_len   207
+
+    ;   ; Save the packets sent over ethernet to the file ./edi.debug
+    ;   dump        false
+
+    ;   ; show more debugging info
+    ;   verbose     false
+
+    ;   ; (optional) set the kind of alignment to use in TAG Packets
+    ;   ; 0: no padding
+    ;   ; 8: pad to eight bytes (default)
+    ;   ; above 8: insert *dmy TAG Item to pad to given size in bytes
+    ;   ;tagpacket_alignment 8
+    ;
+
+    ; Other outputs:
+    ; TCP listen on port
+    ;net "tcp://host:port"
+    ; UDP send to host:port
+    ;net "ucp://host:port"
+    ; RAW (for farsync ETI card)
+    ;farsync "raw://device"
+}