New version

27 files changed, 898 insertions, 602 deletions

diff --git a/README.md b/README.md
index e76b6bb..42b4187 100644
--- a/README.md
+++ b/README.md
@@ -1,72 +1,105 @@
-ODR-mmbTools scripts for 24/7 operation
-=======================================
-version : 2016-10-07
-
-Prerequisites
--------------
-You need to have a working ODR-DabMux, ODR-DabMod, ODR-AudioEnc, ODR-PadEnc
-and/or Toolame-DAB configuration to use these scripts. Also
-[supervisor](http://supervisord.org/) is needed. (apt-get install supervisor)
-
-The tools are expected to be installed in their usual place in /usr/local.
-
-Folder Structure
-----------------
-
-The 'config' folder contains all needed configuration file and needed to be
-moved into /home/odr/ folder.
-
-  * config/mod.conf : contains ODR-DabMod configuration
-  * config/mux.conf : contains ODR-DabMux configuration
-  * config/supervisor/ : contains all supervisor configuration files
-  * config/mot/ : contains all dls and slide files. You need to create fifo
-    with mkfifo for each radio (e.g. mkfifo /home/odr/config/mot/f3.pad)
-
-
-About Audio and PAD Encoders
-----------------------------
-
-The encoder (ODR-AudioEnc or toolame-dab) writes ICY-Text into a text file. You
-need to create this file at first for each radio :
-  * touch /home/odr/config/mot/f3.txt
-
-ODR-PadEnc reads ICY-Text information from previous text file and writes into
-the pad file. This pad file need to be a FIFO and you need to create it for
-each radio :
-  * mkfifo /home/odr/config/mot/f3.pad
-
-If you use Slide Show, you can put your images into the directory under mot
-folder corresponding to the radio (example: /home/odr/config/mot/f3/)
-
-
-About Supervisor
-----------------
-
-You need to create sym link into /etc/supervisor/conf.d/ for each radio
-configuration file and call supervisorctl to reread and update configuration.
-Please refer to the official [supervisor](http://supervisord.org/)
-documentation for details.
-
-Example :
-  * sudo ln -s /home/odr/config/supervisor/f3.conf /etc/supervisor/conf.d/f3.conf
-  * sudo supervisorctl reread
-  * sudo supervisorctl update
-
-All services are launched from supervisor.
-
-To show status of all services :
-  * sudo supervisorctl status
-
-To [stop|start|restart] a service :
-  * sudo supervisorctl [stop|start|restart] service-name
-
-To apply change after change anything in /home/odr/config/supervisor/ file you
-need to call supervisor to reread and update configuration.
-  * sudo supervisorctl reread
-  * sudo supervisorctl update
-
-Supervisor redirects all logs from the tools to files in /var/log/supervisor/
-You may need to ensure yourself that this directory exists. The logs will get
-rotated according to the policy defined by your distribution. More details in
-the [child logging](http://supervisord.org/logging.html#child-process-logs)
-section of the documentation.
+# Table of contents
+- [Introduction](#introduction)
+- [ODR-mmbTools components](#odr-mmbtools-components)
+- [Repository structure](#repository-structure)
+- [Operations](#operations)
+- [Configuration](#configuration)
+
+# Introduction
+The goal of this repository is to provide a:
+- Debian shell script that installs or removes the:
+    - Main components of the odr-mmbTools suite used in a transmission chain
+    - [Supervisor](http://supervisord.org/) package
+- Simple yet functional dab configuration sample that you can adapt to your needs
+- Vagrantfile that allows you to quickly setup a lite debian bullseye virtual environment over which to test ODR-mmbTools
+
+# ODR-mmbTools components
+- Encoder-manager: provides a web interface to manage audio streams and their related PAD data
+- PAD encoder: one per radio station being broadcasted. Gathers radio-related data (ex: artist, song, slogan, logo) and shares it with the related audio encoder
+- Audio encoder: one per radio station being broadcasted. Receives the radio web stream, combines it with the data from the PAD encoder and shares it with the multiplexer
+- Multiplexer: packs the data from audio encoders into a DAB/DAB+ ensemble and shares it with a modulator
+- Multiplex-manager: provides a web interface to view and modify some multiplex parameters
+- Modulator: creates a modulation with the multiplexer data and sends it to a transmitter
+
+# Repository structure
+## config
+This folder contains the sample configuration files. If you use the provided installation script, it will be copied on your system:
+- config/odr-dabmod.ini: ODR-DabMod configuration
+- config/odr-dabmux.info: ODR-DabMux configuration
+- config/supervisor/ODR-encoders.conf: supervisor configuration file for all encoders (audio + PAD)
+- config/supervisor/ODR-encoders.conf: supervisor configuration file for all other odr-mmbTools excluding the encoders
+- config/mot/: folder with the dls and slide files
+## install
+This folder contains the installation/removal shell script. Please check the **README.md** file inside this directory to run the installation shell script
+## vagrant
+This folder contains Vagrant-related files. Please check the **README.md** file inside this directory to setup and run a Vagrant box.
+
+# Operations
+In this section:
+- **server** relates to the host where you installed the odr-mmbTools and the configuration files
+- **client** relates to any computer (including the server)
+
+After you ran the installation script on the server, point the web browser on the client to the **Supervisor web interface** on the host (http://server_address:8001). The default user name is **odr** and the default password is **odr**. Please note that this user name is not a system user profile. 
+
+The supervisor web interface provides a graphical interface to start or stop each components of the DAB/DAB+ transmission chain: modulator, multiplexer, encoders (audio & data), encoder-manager and multiplex-manager.
+
+# Configuration
+## User access
+### Supervisor web interface
+If you want to change the default user name and/or user password authorized to access the Supervisor web interface, then apply the following commands:
+```
+# Change the user name
+sudo sed -e 's/^username = odr/^username = whatever_user/' -i /etc/supervisor/supervisord.conf
+
+# Change the user password
+sudo sed -e 's/^password = odr/^password = whatever_password/' -i /etc/supervisor/supervisord.conf
+```
+Please note that *whatever_user* is not related to any linux profiles
+
+### Encoder-manager web interface
+If you want to change the default user profile and/or user password authorized to access the Encoder-manager web interface, then apply the following commands:
+```
+# Change the user name
+sed -e 's/"username": "odr"/"username": "whatever_user"/' -i $HOME/config/encodermanager.json
+
+# Change the user password
+sed -e 's/"password": "odr"/"password": "whatever_password"/' -i $HOME/config/encodermanager.json
+```
+Please note that *whatever_user* is not related to any linux profiles
+
+## RF Transmission
+### Improve the transmitted RF spectrum
+If your hardware/virtual host is not powerful enough, then you should set the following 2 parameters in the $HOME/config/odr-dabmod.ini file to less stringent value:
+- modulator rate=2048000
+- firfilter enabled=0
+
+### Change the transmission channel
+If channel 5A is being used in your area, you can easily switch to a [new transmission channel](http://www.wohnort.org/config/freqs.html) by applying the following command: 
+```
+sed -e 's/^channel=5A/^channel=a_free_channel_in_your_area/' -i $HOME/config/odr-dabmod.ini
+```
+
+### Change the SOAPYSDR-compatible device
+The modulator sample configuration file is setup for a [HackRF One](https://greatscottgadgets.com/hackrf/one/) using the [SoapySDR](https://github.com/pothosware/SoapySDR/wiki) interface.
+
+If you need to transmit with another SoapySDR-compatible transceiver card, then apply one of the following commands:
+```
+# LimeSDR
+sed -e 's/^device=driver=hackrf/^device=driver=lime/' -i $HOME/config/odr-dabmod.ini
+
+# PlutoSDR
+sed -e 's/^device=driver=hackrf/^device=driver=plutosdr/' -i $HOME/config/odr-dabmod.ini
+```
+
+### Change the transmission power setting
+We recommend that you check the documentation of the SoapySDR module for your device for the field **txgain** in file $HOME/config/odr-dabmod.ini
+
+## Broadcast programs
+### Change the name of the multiplex
+If you want to change the name of the multiplex, then change the label and shortlabel values within the **ensemble** block in file $HOME/config/odr-dabmux.info
+
+### Change and/or add new programs
+If your server is powerful enough, then you can add more services/sub-channels/components
+1. Start job **10-EncoderManager** from the Supervisor web access
+1. Point the web browser of the client to the **Encoder Manager web interface** on the host (http://server_address:8003). You can use the excellent [radio browser directory](https://www.radio-browser.info) to identify the url of the radio audio stream
+1. Modify file $HOME/config/odr-dabmux.info and adapt the services, subchannels and components in relation with the changes you made with the Encoder-Manager. You should use the values mentionned in the [official ETSI TS 101 756 document](https://www.etsi.org/deliver/etsi_ts/101700_101799/101756/02.02.01_60/ts_101756v020201p.pdf). 
diff --git a/config/encodermanager.json b/config/encodermanager.json
new file mode 100644
index 0000000..6c8a04f
--- /dev/null
+++ b/config/encodermanager.json
@@ -0,0 +1,165 @@
+{
+    "global": {
+        "daemon": false,
+        "max_encoder_instance": 3,
+        "logs_directory": "/home/pi/ODR-mmbTools/ODR-EncoderManager/logs/",
+        "supervisor_xmlrpc": "http://odr:odr@127.0.0.1:8001/RPC2",
+        "static_directory": "/home/pi/ODR-mmbTools/ODR-EncoderManager/static/",
+        "host": "0.0.0.0",
+        "supervisor_file": "/home/pi/config/supervisor/ODR-encoders.conf",
+        "port": 8003
+    },
+    "auth": {
+        "users": [
+            {
+                "username": "odr",
+                "password": "odr"
+            }
+        ]
+    },
+    "odr": [
+        {
+            "uniq_id": "defee58a-f768-4ca9-a0f7-88f08b2e8748",
+            "autostart": "false",
+            "path": {
+                "encoder_path": "/usr/local/bin/odr-audioenc",
+                "padenc_path": "/usr/local/bin/odr-padenc",
+                "sourcecompanion_path": "/usr/local/bin/odr-sourcecompanion",
+                "zmq_key_tmp_file": "/var/tmp/zmq-P01.key"
+            },
+            "source": {
+                "type": "stream",
+                "stats_socket": "/var/tmp/P01.stats",
+                "stream_url": "http://radiomonaco.ice.infomaniak.ch/radiomonaco-128.mp3",
+                "stream_writeicytext": "true",
+                "stream_lib": "vlc",
+                "alsa_device": "plughw:1,0",
+                "driftcomp": "true",
+                "silence_detect": "true",
+                "silence_duration": "60",
+                "avt_input_uri": "udp://:32010",
+                "avt_control_uri": "udp://192.168.128.111:9325",
+                "avt_pad_port": "9405",
+                "avt_jitter_size": "80",
+                "avt_timeout": "4000",
+                "aes67_sdp_file": "/var/tmp/defee58a-f768-4ca9-a0f7-88f08b2e8748.sdp",
+                "aes67_sdp": ""
+            },
+            "output": {
+                "type": "dabp",
+                "output": [
+                    {
+                        "name": "",
+                        "type": "editcp",
+                        "host": "127.0.0.1",
+                        "port": "9001",
+                        "enable": "true"
+                    }
+                ],
+                "zmq_key": "",
+                "bitrate": "128",
+                "samplerate": "48000",
+                "channels": "2",
+                "dabp_sbr": "true",
+                "dabp_ps": "false",
+                "dabp_afterburner": "true",
+                "dab_dabmode": "j",
+                "dab_dabpsy": "1",
+                "edi_identifier": "",
+                "edi_timestamps_delay": ""
+            },
+            "padenc": {
+                "enable": "true",
+                "pad": "34",
+                "dls_file": "/home/pi/config/mot/P01/INFO.dls",
+                "slide_directory": "/home/pi/config/mot/P01/slide/",
+                "slide_sleeping": "0",
+                "slide_once": "false",
+                "raw_dls": "false",
+                "raw_slides": "false",
+                "uniform_label": "12",
+                "uniform_label_ins": "1200",
+                "slide_carousel_interval": "",
+                "slide_live_interval": "",
+                "slide_live_lifetime": ""
+            },
+            "name": "P01",
+            "description": "Radio Monaco",
+            "supervisor_additional_options": {
+                "user": "pi",
+                "group": "pi",
+                "autorestart": "false"
+            }
+        },
+        {
+            "uniq_id": "7158c498-1ef1-4580-b385-23a3c06ba985",
+            "autostart": "false",
+            "path": {
+                "encoder_path": "/usr/local/bin/odr-audioenc",
+                "padenc_path": "/usr/local/bin/odr-padenc",
+                "sourcecompanion_path": "/usr/local/bin/odr-sourcecompanion",
+                "zmq_key_tmp_file": "/var/tmp/zmq-P02.key"
+            },
+            "source": {
+                "type": "stream",
+                "stats_socket": "/var/tmp/P02.stats",
+                "stream_url": "http://media-ice.musicradio.com/CapitalMP3",
+                "stream_writeicytext": "true",
+                "stream_lib": "vlc",
+                "alsa_device": "plughw:1,0",
+                "driftcomp": "true",
+                "silence_detect": "true",
+                "silence_duration": "60",
+                "avt_input_uri": "udp://:32010",
+                "avt_control_uri": "udp://192.168.128.111:9325",
+                "avt_pad_port": "9405",
+                "avt_jitter_size": "80",
+                "avt_timeout": "4000",
+                "aes67_sdp_file": "/var/tmp/7158c498-1ef1-4580-b385-23a3c06ba985.sdp",
+                "aes67_sdp": ""
+            },
+            "output": {
+                "type": "dabp",
+                "output": [
+                    {
+                        "name": "",
+                        "type": "editcp",
+                        "host": "127.0.0.1",
+                        "port": "9002",
+                        "enable": "true"
+                    }
+                ],
+                "zmq_key": "",
+                "bitrate": "128",
+                "samplerate": "48000",
+                "channels": "2",
+                "dabp_sbr": "true",
+                "dabp_ps": "false",
+                "dabp_afterburner": "true",
+                "dab_dabmode": "j",
+                "dab_dabpsy": "1",
+                "edi_identifier": "",
+                "edi_timestamps_delay": ""
+            },
+            "padenc": {
+                "enable": "true",
+                "pad": "34",
+                "dls_file": "/home/pi/config/mot/P02/INFO.dls",
+                "slide_directory": "/home/pi/config/mot/P02/slide",
+                "slide_sleeping": "0",
+                "slide_once": "false",
+                "raw_dls": "false",
+                "raw_slides": "false",
+                "uniform_label": "12",
+                "uniform_label_ins": "1200"
+            },
+            "name": "P02",
+            "description": "Capital FM London",
+            "supervisor_additional_options": {
+                "user": "pi",
+                "group": "pi",
+                "autorestart": "false"
+            }
+        }
+    ]
+}
\ No newline at end of file
diff --git a/config/mod.ini b/config/mod.ini
deleted file mode 100644
index 9c5cf07..0000000
--- a/config/mod.ini
+++ /dev/null
@@ -1,244 +0,0 @@
-; Sample configuration file for ODR-DabMod
-
-[remotecontrol]
-; enable the telnet remote control on localhost:2121
-; Since this is totally unsecure telnet, the software
-; will only listen on the local loopback interface.
-; To get secure remote access, use SSH port forwarding
-telnet=1
-telnetport=2121
-
-; Enable zmq remote control.
-; The zmq remote control is intended for machine-to-machine
-; integration and requires that ODR-DabMod is built with zmq support.
-; The zmq remote control may run in parallel with Telnet.
-;
-; Protocol:
-; ODR-DabMod binds a zmq rep socket so clients must connect
-; using either req or dealer socket.
-; [] denotes message part as zmq multi-part message are used for delimitation.
-; All message parts are utf-8 encoded strings and match the Telnet command set.
-; Explicit codes are denoted with "".
-; The following commands are supported:
-; REQ: ["ping"]
-; REP: ["ok"]
-;
-; REQ: ["get"][module name][parameter]
-; REP: [value] _OR_ ["fail"][error description]
-;
-; REQ: ["set"][module name][parameter][value]
-; REP: ["ok"] _OR_ ["fail"][error description]
-zmqctrl=0
-zmqctrlendpoint=tcp://127.0.0.1:9400
-
-[log]
-; Write to a logfile or to syslog.
-; Setting filename to stderr is very useful during tests and development
-syslog=0
-filelog=1
-filename=/dev/stderr
-
-[input]
-; A file or fifo input is using transport=file
-;transport=file
-;source=/dev/stdin
-
-; When the end of file is reached, it is possible to rewind it
-;loop=0
-
-; When recieving data using ZeroMQ, the source is the URI to be used
-transport=zeromq
-source=tcp://localhost:9050
-; The option max_frames_queued defines the maximum number of ETI frames
-; that can be in the input queue
-max_frames_queued=100
-
-[modulator]
-; Gain mode: 0=FIX, 1=MAX, 2=VAR
-;
-;   Mode 0 (FIX) uses a fixed factor and is really not recommended. It is more
-; useful on an academic perspective for people trying to understand the DAB
-; modulation.
-;
-;   Mode 1 (MAX) is the normalization of every OFDM symbol. No overshoot, no
-; truncating, but varying output power (around 3dB) which might not be the best
-; for some power amplifier. The output samples are limited to a magnitude
-; of 32768.
-;
-;   Mode 2 (VAR) uses the method specified in ETSI 300 798. This method
-; normalizes to 4 times the standard deviation for an approximation of the RMS
-; power. So around 6/100000 samples will be truncated and will introduce some
-; really minor distortion. But this mode also maximizes the output power. This
-; is the gain mode recommended for real world operation as it is based on a DAB
-; standard; the only difference is that ODR-DabMod uses a better resolution
-; with 16 bits instead of 8 bits.
-gainmode=2
-
-; Transmission mode
-; If not defined, take the mode from ETI
-mode=1
-
-; The digital gain is a value that is multiplied to each sample. It is used
-; to tune the chain to make sure that no non-linearities appear up to the
-; USRP daughterboard programmable gain amplifier (PGA).
-; If there is clipping, the spectral quality of the signal will quickly deteriorate,
-; and wide-band noise will be generated.
-;
-; Be aware that there is a dependency with resampling.
-digital_gain=0.8
-
-; Output sample rate. Values other than 2048000 enable
-; resampling.
-; Warning! digital_gain settings are different if resampling
-; is enabled or not !
-rate=2048000
-
-; CIC equaliser for USRP1 and USRP2
-; Set to 0 to disable CicEqualiser
-; when set to 400000000, an additional USRP2 check is enabled.
-; See DabModulator.cpp line 186
-dac_clk_rate=0
-
-; The USRP1 does not have flexible clocking, you will need
-;rate=3200000
-; and
-;dac_clk_rate=128000000
-
-[firfilter]
-; The FIR Filter can be used to create a better spectral quality.
-; The filter taps can be calculated with the python script
-; doc/fir-filter/generate-filter.py
-enabled=0
-filtertapsfile=simple_taps.txt
-
-[output]
-; choose output: possible values: uhd, file, zmq
-output=uhd
-
-[fileoutput]
-; Two output formats are supported: In the default mode,
-; the file output writes I/Q float values (i.e. complex float)
-; to the file. The I and Q samples can take values up to
-; 100000 in absolute magnitude with gainmode FIX.
-; With gainmode VAR, they should never exceed 50000.
-; With gainmode MAX, thet are limited to 32767.
-;format=complexf
-;
-; When the format is set to s8, the output writes I/Q 8-bit
-; signed integers, where the magnitude is multiplied by 128/50000
-; effectively mapping the gainmode VAR range of -50000 -- 50000
-; to -128 -- 128. For other gainmodes, use the digital_gain setting
-; to make sure you don't create clipping.
-;format=s8
-
-; The output file:
-;filename=/dev/stdout
-
-[uhdoutput]
-; The UHD output can be directly used with the Ettus USRP devices
-;
-; You have to set master_clock_rate to a multiple of the
-; sample_rate. Ideally, it should be
-;   master_clock_rate = 4 * sample_rate
-; or even a higher factor.
-;
-; Settings for a USRP B100:
-;device=
-; you can put additional UHD device settings here
-;master_clock_rate=32768000
-;type=b100
-;txgain=2.0
-; Try first with small gain values
-; Also set rate to 2048000
-
-; For the B200
-; More information and measurements available on:
-; http://wiki.opendigitalradio.org/index.php/USRP_B200_Measurements
-;
-; Settings:
-device=
-master_clock_rate=32768000
-type=b200
-txgain=40
-; The B200 needs larger gains (up to 89dB) but,
-; "Gain settings are application specific, but it is recommended that users
-; consider using at least half of the available gain to get reasonable dynamic
-; range."
-;    From the B200 User Manual
-;    http://files.ettus.com/uhd_docs/manual/html/usrp_b200.html
-
-
-; For the USRP1
-;device=
-;type=usrp1
-; the usrp1 can have two daughterboards, the subdevice parameter allows you
-; to choose which one to use
-;subdevice=A:0
-; The USRP1 doesn't support master_clock_rate, you need to enable resamping
-
-
-; You must specify either frequency or channel, but not both.
-;frequency=234208000
-channel=13C
-
-; The reference clock to use. The gpsdo is the ODR LEA-M8F board, the
-; official Ettus GPSDO is selected with gpsdo-ettus
-; possible values : internal, external, MIMO, gpsdo, gpsdo-ettus
-refclk_source=internal
-
-; The reference one pulse-per second to use
-; possible values : none, external, MIMO, gpsdo
-pps_source=none
-
-; Behaviour when external clock reference lock lost
-; possible values: ignore, crash
-behaviour_refclk_lock_lost=ignore
-
-; The maximum accepted holdover time for the gpsdo.
-; Valid only if the refclk and pps_source are set to gpsdo.
-; This value is also used for the initial lock check, and must
-; be at least a minute so that the GPSOD has enough time to lock
-; and to start disciplining its oscillator.
-; Units: seconds
-; Set to 0 to disable holdover check
-; default value: 0
-max_gps_holdover_time=600
-
-; section defining ZeroMQ output properties
-[zmqoutput]
-
-; on which port to listen for connections
-; please see the Transports section in man zmq
-; for more informat io the syntax
-listen=tcp://*:54001
-
-; what ZMQ socket type to use. Valid values: PUB, REP
-; Please see man zmq_socket for documentation
-socket_type=pub
-
-; Used for SFN with the UHD output
-[delaymanagement]
-
-; Enable handling of timestamps for SFN
-synchronous=0
-
-; Whether to mute the TX when incoming frames have no timestamp
-mutenotimestamps=0
-
-; This offset is added to the TIST, and the sum defines the
-; TX time of the transmission frame. It can by changed at runtime
-; through the remote control.
-offset=0.002
-
-; The previous static vs dynamic offset distinction, and reading the
-; modulatoroffset from a file has been removed.
-
-[tii]
-; (experimental)
-; If these options are set, TII transmission is enabled.
-; DAB modes I and II are supported, and must be set explicitly in
-; this file. Reading DAB mode from ETI is not supported.
-enable=0
-comb=16
-pattern=3
-
diff --git a/config/mot/bbc1.txt b/config/mot/P01/INFO.dls
index e69de29..e69de29 100644..100755
--- a/config/mot/bbc1.txt
+++ b/config/mot/P01/INFO.dls
diff --git a/config/mot/P01/INFO.txt b/config/mot/P01/INFO.txt
new file mode 100755
index 0000000..c76ade3
--- /dev/null
+++ b/config/mot/P01/INFO.txt
@@ -0,0 +1 @@
+RADIO MONACO - MADE IN MONTECARLO
diff --git a/config/mot/P01/slide/P01-logo.jpg b/config/mot/P01/slide/P01-logo.jpg
new file mode 100644
index 0000000..50bb69f
--- /dev/null
+++ b/config/mot/P01/slide/P01-logo.jpg
diff --git a/config/mot/f3.txt b/config/mot/P02/INFO.dls
index e69de29..e69de29 100644..100755
--- a/config/mot/f3.txt
+++ b/config/mot/P02/INFO.dls
diff --git a/config/mot/P02/INFO.txt b/config/mot/P02/INFO.txt
new file mode 100755
index 0000000..a00aa4b
--- /dev/null
+++ b/config/mot/P02/INFO.txt
@@ -0,0 +1,2 @@
+LONDON'S NO.1 HIT MUSIC STATION
+
diff --git a/config/mot/P02/slide/P02-logo.jpg b/config/mot/P02/slide/P02-logo.jpg
new file mode 100644
index 0000000..cb40994
--- /dev/null
+++ b/config/mot/P02/slide/P02-logo.jpg
diff --git a/config/mot/fip.txt b/config/mot/fip.txt
deleted file mode 100644
index e69de29..0000000
--- a/config/mot/fip.txt
+++ /dev/null
diff --git a/config/mot/maxxima.txt b/config/mot/maxxima.txt
deleted file mode 100644
index e69de29..0000000
--- a/config/mot/maxxima.txt
+++ /dev/null
diff --git a/config/mux.conf b/config/mux.conf
deleted file mode 100644
index 45896c0..0000000
--- a/config/mux.conf
+++ /dev/null
@@ -1,207 +0,0 @@
-; This is an example configuration file that illustrates
-; the structure of the configuration.
-; It doesn't show all possible options. A more detailed example
-; is available in doc/advanced.mux
-;
-; More information about the usage of the tools is available
-; in the guide, which can be found on the
-; www.opendigitalradio.org website.
-;
-; As you can see, comments are defined by semicolons.
-;
-; It consists of six mandatory sections, whose relative order in this
-; file are of no importance.
-
-; The general section defines global multiplex parameters.
-general {
-    ; the DAB Transmission mode (values 1-4 accepted)
-    dabmode 1
-
-    ; the number of ETI frames to generate (set to 0 to get an unlimited number)
-    nbframes 0
-
-    ; boolean fields can accept either false or true as values:
-
-    ; Set to true to enable logging to syslog
-    syslog false
-
-    ; Enable timestamp definition necessary for SFN
-    ; This also enables time encoding using the MNSC.
-    tist false
-
-    ; The management server is a simple TCP server that can present
-    ; statistics data (buffers, overruns, underruns, etc)
-    ; which can then be graphed a tool like Munin
-    ; The doc/stats_dabmux_multi.py tool is a suitable
-    ; plugin for that.
-    ; If the port is zero, or the line commented, the server
-    ; is not started.
-    managementport 12720
-}
-
-remotecontrol {
-    ; enable the telnet remote control server on the given port
-    ; This server allows you to read and define parameters that
-    ; some features export. It is only accessible from localhost.
-    ; Set the port to 0 to disable the server
-    telnetport 12721
-
-    ; the remote control server makes use of the unique identifiers
-    ; for the subchannels, services and components. Make sure you
-    ; chose them so that you can identify them.
-}
-
-; Some ensemble parameters
-ensemble {
-    id 0x4fff ; you can also use decimal if you want
-    ecc 0xec ; Extended Country Code
-
-    local-time-offset auto  ; autmatically calculate from system local time
-                            ; or
-    ;local-time-offset 1    ; in hours, supports half-hour offsets
-
-    ; all labels are maximum 16 characters in length
-    label "OpenDigitalRadio"
-    ; The short label is built from the label by erasing letters, and cannot
-    ; be longer than 8 characters. If omitted, it will be truncated from the
-    ; label
-    shortlabel "ODR"
-}
-
-; Definition of DAB services
-services {
-    ; Each service has it's own unique identifier, that is
-    ; used throughout the configuration file and for the RC.
-    srv-f3 {
-        id 0x8daa
-        label "Frequence3"
-        shortlabel "F3"
-    }
-    srv-maxxima {
-        id 0x8dab
-        label "Maxxima"
-    }
-    srv-fip {
-        id 0x8dac
-        label "FIP"
-    }
-    srv-bbc1 {
-        id 0x8dad
-        label "BBC1"
-    }
-}
-
-subchannels {
-    sub-f3 {
-        type dabplus
-        inputfile "tcp://*:9001"
-        bitrate 96
-        id 1
-        protection 3
-        ; ZMQ specific options, mandatory:
-
-        ; Maximum size of input buffer, in AAC frames (24ms)
-        ; when this buffer size is reached, some frames will be
-        ; discarded to get the size again below this value.
-        ; As the present implementation discards entire AAC superframes,
-        ; (5 frames = 120ms) the effect will clearly be audible.
-        zmq-buffer 40
-
-        ; At startup or after an underrun, the buffer is filled to this
-        ; amount of AAC frames before streaming starts.
-        zmq-prebuffering 20
-    }
-    sub-maxxima {
-        type dabplus
-        inputfile "tcp://*:9002"
-        bitrate 96
-        id 2
-        protection 3
-
-        zmq-buffer 40
-        zmq-prebuffering 20
-    }
-    sub-fip {
-        type dabplus
-        inputfile "tcp://*:9003"
-        bitrate 96
-        id 3
-        protection 3
-
-        zmq-buffer 40
-        zmq-prebuffering 20
-    }
-
-    sub-bbc1 {
-        type audio
-        inputfile "tcp://*:9004"
-        bitrate 128
-        id 4
-        protection 1
-
-        zmq-buffer 40
-        zmq-prebuffering 20
-    }
-}
-
-; In our simple example, each component links one service to one subchannel
-components {
-    ; the component unique identifiers are used for the RC.
-    comp-f3 {
-        ; According to specification, you should not define component labels if
-        ; the service is only used in one component. The service label is sufficient
-        ; in that case.
-
-        service srv-f3
-        subchannel sub-f3
-
-        figtype 0x2
-        ; 0x2   : MOT Slideshow
-    }
-
-    comp-maxxima {
-        service srv-maxxima
-        subchannel sub-maxxima
-
-        figtype 0x2
-    }
-
-    comp-fip {
-        service srv-fip
-        subchannel sub-fip
-
-        figtype 0x2
-    }
-
-    comp-bbc1 {
-        service srv-bbc1
-        subchannel sub-bbc1
-
-        figtype 0x2
-    }
-}
-
-outputs {
-    ; The unique-id can be used by the remote control or the statistics server
-    ; to identify the output
-
-    ; Output RAW ETI NI to standard output
-    ;stdout "fifo:///dev/stdout?type=raw"
-
-    ; ZeroMQ output example
-    ; Listen on all interfaces, on port 9050
-    zmq  "zmq+tcp://*:9050"
-
-    ; Throttle output to real-time (one ETI frame every 24ms)
-    throttle "simul://"
-
-    ; Important! For real-time operation, you need to have exactly one
-    ; output that applies back-pressure to ODR-DabMux, otherwise it will run
-    ; at the highest possible rate on your system!
-    ;
-    ; For an output to a pipe, the data consumer at the other end of the pipe
-    ; will dictate the multiplexing rate to ODR-DabMux.
-    ;
-    ; If you use the zmq output, you must also enable a simul:// output!
-}
-
diff --git a/config/odr-dabmod.ini b/config/odr-dabmod.ini
new file mode 100644
index 0000000..cd9bd5e
--- /dev/null
+++ b/config/odr-dabmod.ini
@@ -0,0 +1,41 @@
+[remotecontrol]
+telnet=0
+telnetport=2121
+zmqctrl=0
+zmqctrlendpoint=tcp://127.0.0.1:9400
+
+[log]
+syslog=0
+filelog=0
+filename=odr-dabmod.log
+
+[input]
+transport=edi
+source=tcp://127.0.0.1:9201
+
+[modulator]
+gainmode=var
+digital_gain=0.8
+rate=4096000
+
+[cfr]
+enable=0
+clip=50.0
+error_clip=0.1
+
+[firfilter]
+enabled=1
+
+[poly]
+enabled=0
+polycoeffile=polyCoefs
+
+[output]
+output=soapysdr
+
+[soapyoutput]
+device=driver=hackrf
+master_clock_rate=32768000
+txgain=23
+channel=5A
+bandwidth=1750000
diff --git a/config/odr-dabmux.info b/config/odr-dabmux.info
new file mode 100644
index 0000000..91eb04f
--- /dev/null
+++ b/config/odr-dabmux.info
@@ -0,0 +1,99 @@
+general {
+    dabmode 1
+    nbframes 0
+    syslog false
+    tist false
+    managementport 12720
+}
+
+remotecontrol {
+    telnetport 12721
+    zmqendpoint tcp://lo:12722
+}
+
+ensemble {
+    id 0x4fff
+    ecc 0xe1
+    local-time-offset auto
+    international-table 1
+    reconfig-counter hash
+    label "Micro DAB"
+    shortlabel "M DAB"
+}
+
+services {
+    srv-01 {
+        id 0xb1c7
+        ecc 0xe2
+        label "RADIO MONACO"
+        shortlabel "MONACO"
+        pty 10
+        pty-sd static
+        language 0x0f
+    }
+    srv-02 {
+        id 0xc479
+        ecc 0xe1
+        label "CAPITAL LONDON"
+        shortlabel "CAPITAL"
+        pty 10
+        pty-sd static
+        language 0x09
+    }
+}
+
+subchannels {
+    sub-01 {
+        type dabplus
+        bitrate 128
+        id 1
+        protection 3
+        inputproto edi
+        inputuri "tcp://127.0.0.1:9001"
+        buffer-management prebuffering
+        buffer 40
+        prebuffering 20
+    }
+    sub-02 {
+        type dabplus
+        bitrate 128
+        id 2
+        protection 3
+        inputproto edi
+        inputuri "tcp://127.0.0.1:9002"
+        buffer-management prebuffering
+        buffer 40
+        prebuffering 20
+    }
+}
+
+components {
+    comp-01 {
+        service srv-01
+        subchannel sub-01
+        user-applications {
+            userapp "slideshow"
+        }
+    }
+    comp-02 {
+        service srv-02
+        subchannel sub-02
+        user-applications {
+            userapp "slideshow"
+        }
+    }
+}
+
+outputs {
+    edi {
+        destinations {
+            edi_tcp {
+                protocol tcp
+                listenport 9201
+            }
+        }
+    }
+
+    ; Throttle output to real-time (one ETI frame every 24ms)
+    throttle "simul://"
+}
diff --git a/config/supervisor/ODR-encoders.conf b/config/supervisor/ODR-encoders.conf
new file mode 100644
index 0000000..362a41b
--- /dev/null
+++ b/config/supervisor/ODR-encoders.conf
@@ -0,0 +1,79 @@
+# P01
+[program:odr-padencoder-defee58a-f768-4ca9-a0f7-88f08b2e8748]
+command=/usr/local/bin/odr-padenc
+ --dir=/home/pi/config/mot/P01/slide
+ --sleep=0
+ --dls=/home/pi/config/mot/P01/INFO.dls
+ --output=defee58a-f768-4ca9-a0f7-88f08b2e8748
+ --label=12
+ --label-ins=1200
+autostart=false
+autorestart=false
+priority=10
+user=pi
+group=pi
+redirect_stderr=true
+stdout_logfile=/var/log/supervisor/odr-padencoder-defee58a-f768-4ca9-a0f7-88f08b2e8748.log
+
+# P01
+[program:odr-audioencoder-defee58a-f768-4ca9-a0f7-88f08b2e8748]
+command=/usr/local/bin/odr-audioenc
+ --vlc-uri=http://radiomonaco.ice.infomaniak.ch/radiomonaco-128.mp3
+ --drift-comp
+ --silence=60
+ --bitrate=128
+ --rate=48000
+ --channels=2
+ --sbr
+ --pad=34
+ --pad-socket=defee58a-f768-4ca9-a0f7-88f08b2e8748
+ --write-icy-text=/home/pi/config/mot/P01/INFO.dls
+ -e tcp://127.0.0.1:9001
+ --stats=/var/tmp/P01.stats
+autostart=false
+autorestart=false
+priority=10
+user=pi
+group=pi
+redirect_stderr=true
+stdout_logfile=/var/log/supervisor/odr-audioencoder-defee58a-f768-4ca9-a0f7-88f08b2e8748.log
+
+# P02
+[program:odr-padencoder-7158c498-1ef1-4580-b385-23a3c06ba985]
+command=/usr/local/bin/odr-padenc
+ --dir=/home/pi/config/mot/P02/slide
+ --sleep=0
+ --dls=/home/pi/config/mot/P02/INFO.dls
+ --output=7158c498-1ef1-4580-b385-23a3c06ba985
+ --label=12
+ --label-ins=1200
+autostart=false
+autorestart=false
+priority=10
+user=pi
+group=pi
+redirect_stderr=true
+stdout_logfile=/var/log/supervisor/odr-padencoder-7158c498-1ef1-4580-b385-23a3c06ba985.log
+
+# P02
+[program:odr-audioencoder-7158c498-1ef1-4580-b385-23a3c06ba985]
+command=/usr/local/bin/odr-audioenc
+ --vlc-uri=http://media-ice.musicradio.com/CapitalMP3
+ --drift-comp
+ --silence=60
+ --bitrate=128
+ --rate=48000
+ --channels=2
+ --sbr
+ --pad=34
+ --pad-socket=7158c498-1ef1-4580-b385-23a3c06ba985
+ --write-icy-text=/home/pi/config/mot/P02/INFO.dls
+ -e tcp://127.0.0.1:9002
+ --stats=/var/tmp/P02.stats
+autostart=false
+autorestart=false
+priority=10
+user=pi
+group=pi
+redirect_stderr=true
+stdout_logfile=/var/log/supervisor/odr-audioencoder-7158c498-1ef1-4580-b385-23a3c06ba985.log
diff --git a/config/supervisor/ODR-misc.conf b/config/supervisor/ODR-misc.conf
new file mode 100644
index 0000000..8e4279f
--- /dev/null
+++ b/config/supervisor/ODR-misc.conf
@@ -0,0 +1,38 @@
+[program:10-EncoderManager]
+command=python3 run.py -c /home/pi/config/encodermanager.json
+directory=/home/pi/ODR-mmbTools/ODR-EncoderManager
+autostart=false
+autorestart=false
+priority=10
+user=pi
+group=pi
+stderr_logfile=/var/log/supervisor/encoderManager.log
+stdout_logfile=/var/log/supervisor/encoderManager.log
+
+[program:20-Multiplex]
+command=odr-dabmux odr-dabmux.info
+directory=/home/pi/config/
+autostart=false
+autorestart=false
+user=pi
+group=pi
+stderr_logfile=/var/log/supervisor/mux.log
+stdout_logfile=/var/log/supervisor/mux.log
+
+[program:21-Multiplex-Manager]
+command=python3 odr-dabmux-gui.py --port=8002 --host=raspberrypi.local
+directory=/home/pi/ODR-mmbTools/ODR-DabMux/gui
+autostart=false
+autorestart=false
+user=pi
+group=pi
+stderr_logfile=/var/log/supervisor/mux-manager.log
+stdout_logfile=/var/log/supervisor/mux-manager.log
+
+[program:30-Modulator]
+command=odr-dabmod odr-dabmod.ini
+directory=/home/pi/config/
+autostart=false
+autorestart=false
+stderr_logfile=/var/log/supervisor/mod.log
+stdout_logfile=/var/log/supervisor/mod.log
diff --git a/config/supervisor/encoder-bbc1.conf b/config/supervisor/encoder-bbc1.conf
deleted file mode 100644
index c53068a..0000000
--- a/config/supervisor/encoder-bbc1.conf
+++ /dev/null
@@ -1,20 +0,0 @@
-[program:encoder-bbc1]
-# DAB encoding using odr-audioenc
-command=/usr/local/bin/odr-audioenc --dab --vlc-uri=http://bbcmedia.ic.llnwd.net/stream/bbcmedia_radio1_mf_p -b 128 -r 48000 -o tcp://127.0.0.1:9004 --pad=58 --pad-fifo=/home/odr/config/mot/bbc1.pad --write-icy-text=/home/odr/config/mot/bbc1.txt
-
-# DAB encoding using toolame
-#command=/usr/local/bin/toolame-dab -s 48 -V http://bbcmedia.ic.llnwd.net/stream/bbcmedia_radio1_mf_p -b 128 -W /home/odr/config/mot/bbc1.txt -p 58 -P /home/odr/config/mot/bbc1.pad tcp://127.0.0.1:9004
-
-autostart=false
-autorestart=true
-priority=10
-stderr_logfile=/var/log/supervisor/encoder-bbc1.log
-stdout_logfile=/var/log/supervisor/encoder-bbc1.log
-
-[program:mot-bbc1]
-command=/usr/local/bin/odr-padenc -t /home/odr/config/mot/bbc1.txt -o /home/odr/config/mot/bbc1.pad --pad=58 --charset=15 --dir=/home/odr/config/mot/bbc1/ --sleep=30
-autostart=false
-autorestart=true
-priority=10
-stderr_logfile=/var/log/supervisor/mot-bbc1.log
-stdout_logfile=/var/log/supervisor/mot-bbc1.log
diff --git a/config/supervisor/encoder-f3.conf b/config/supervisor/encoder-f3.conf
deleted file mode 100644
index 715bf1a..0000000
--- a/config/supervisor/encoder-f3.conf
+++ /dev/null
@@ -1,15 +0,0 @@
-[program:encoder-f3]
-command=/usr/local/bin/odr-audioenc --vlc-uri=http://ice.stream.frequence3.net/frequence3-128.mp3 -b 96 -r 48000 -o tcp://127.0.0.1:9001 --pad=58 --pad-fifo=/home/odr/config/mot/f3.pad --write-icy-text=/home/odr/config/mot/f3.txt
-autostart=false
-autorestart=true
-priority=10
-stderr_logfile=/var/log/supervisor/encoder-f3.log
-stdout_logfile=/var/log/supervisor/encoder-f3.log
-
-[program:mot-f3]
-command=/usr/local/bin/odr-padenc -t /home/odr/config/mot/f3.txt -o /home/odr/config/mot/f3.pad --pad=58 --dir=/home/odr/config/mot/f3/ --sleep=30
-autostart=false
-autorestart=true
-priority=10
-stderr_logfile=/var/log/supervisor/mot-f3.log
-stdout_logfile=/var/log/supervisor/mot-f3.log
diff --git a/config/supervisor/encoder-fip.conf b/config/supervisor/encoder-fip.conf
deleted file mode 100644
index a35b96b..0000000
--- a/config/supervisor/encoder-fip.conf
+++ /dev/null
@@ -1,15 +0,0 @@
-[program:encoder-fip]
-command=/usr/local/bin/odr-audioenc --vlc-uri=http://audio.scdn.arkena.com/11016/fip-midfi128.mp3 -b 96 -r 48000 -o tcp://127.0.0.1:9003 --pad=58 --pad-fifo=/home/odr/config/mot/fip.pad --write-icy-text=/home/odr/config/mot/fip.txt
-autostart=false
-autorestart=true
-priority=10
-stderr_logfile=/var/log/supervisor/encoder-fip.log
-stdout_logfile=/var/log/supervisor/encoder-fip.log
-
-[program:mot-fip]
-command=/usr/local/bin/odr-padenc -t /home/odr/config/mot/fip.txt -o /home/odr/config/mot/fip.pad --pad=58 --dir=/home/odr/config/mot/fip/ --sleep=30
-autostart=false
-autorestart=true
-priority=10
-stderr_logfile=/var/log/supervisor/mot-fip.log
-stdout_logfile=/var/log/supervisor/mot-fip.log
diff --git a/config/supervisor/encoder-maxxima.conf b/config/supervisor/encoder-maxxima.conf
deleted file mode 100644
index 550eb91..0000000
--- a/config/supervisor/encoder-maxxima.conf
+++ /dev/null
@@ -1,15 +0,0 @@
-[program:encoder-maxxima]
-command=/usr/local/bin/odr-audioenc --vlc-uri=http://maxxima.mine.nu:8000/ -b 96 -r 32000 -o tcp://127.0.0.1:9002 --pad=58 --pad-fifo=/home/odr/config/mot/maxxima.pad --write-icy-text=/home/odr/config/mot/maxxima.txt
-autostart=false
-autorestart=true
-priority=10
-stderr_logfile=/var/log/supervisor/encoder-maxxima.log
-stdout_logfile=/var/log/supervisor/encoder-maxxima.log
-
-[program:mot-maxxima]
-command=/usr/local/bin/odr-padenc -t /home/odr/config/mot/maxxima.txt -o /home/odr/config/mot/maxxima.pad --pad=58 --dir=/home/odr/config/mot/maxxima/ --sleep=30
-autostart=false
-autorestart=true
-priority=10
-stderr_logfile=/var/log/supervisor/mot-maxxima.log
-stdout_logfile=/var/log/supervisor/mot-maxxima.log
diff --git a/config/supervisor/mod.conf b/config/supervisor/mod.conf
deleted file mode 100644
index f4941e6..0000000
--- a/config/supervisor/mod.conf
+++ /dev/null
@@ -1,7 +0,0 @@
-[program:mod]
-command=/usr/local/bin/odr-dabmod /home/odr/config/mod.ini
-autostart=false
-autorestart=true
-priority=1
-stderr_logfile=/var/log/supervisor/mod.log
-stdout_logfile=/var/log/supervisor/mod.log
diff --git a/config/supervisor/mux.conf b/config/supervisor/mux.conf
deleted file mode 100644
index 5539ea3..0000000
--- a/config/supervisor/mux.conf
+++ /dev/null
@@ -1,7 +0,0 @@
-[program:mux]
-command=/usr/local/bin/odr-dabmux /home/odr/config/mux.conf
-autostart=false
-autorestart=true
-priority=1
-stderr_logfile=/var/log/supervisor/mux.log
-stdout_logfile=/var/log/supervisor/mux.log
diff --git a/install/README.md b/install/README.md
new file mode 100644
index 0000000..017267a
--- /dev/null
+++ b/install/README.md
@@ -0,0 +1,56 @@
+# Table of contents
+- [Introduction](#introduction)
+- [Installation](#installation)
+- [Removal](#removal)
+
+# Introduction
+The goal of the odr-get shell script is to install:
+- the [odr-mmbtools](https://www.opendigitalradio.org/mmbtools) components developed by the [Open Digital Radio](https://www.opendigitalradio.org/) non-profit association on a clean debian environment
+- Working configuration files that you can later customize as you see fit
+
+# Installation
+## Preliminary notes
+We **highly recommend** that you install odr-mmbTools on a **new debian** environment, starting from the Bullseye release. Since some software components, like the audio encoders or the modulator, are CPU-intensive, we recommend you setup a lite debian environment (ie. without a GUI framework).
+
+If you want to quickly setup a lite clean debian environment, we suggest you use [Vagrant](https://www.vagrantup.com) associated with a virtualization hypervisor, like [Virtualbox](https://www.virtualbox.org). A sample Vagrantfile is available in the Vagrant folder of this repository.
+
+## Steps
+1. Sign-in with your user profile
+1. Update your system:
+   ```
+   sudo apt-get update
+   sudo apt-get upgrade -y
+   ```
+1. Find your time zone:
+   ```
+   timedatectl list-timezones
+   ```
+1. Set your time zone:
+   ```
+   sudo timedatectl set-timezone your_timezone
+   ```
+1. Install the git command:
+   ```
+   sudo apt-get install -y git
+   ```
+1. Clone this repository:
+   ```
+   cd $HOME
+   git clone https://github.com/opendigitalradio/dab-scripts.git
+   ```
+1. Install the ODR-mmbTools suite and the sample configuration folder
+   ```
+   # Install the stable version of odr-mmbTools
+   bash $HOME/dab-scripts/install/odr-get --branch master install
+
+   # Or install the current version of odr-mmbTools
+   bash $HOME/dab-scripts/install/odr-get --branch next install
+   ```
+
+# Removal
+If you wish to remove the odr-mmbTools suite and the sample configuration folder, then follow these steps:
+1. Stop all odr-mmbTools related jobs in supervisor
+2. Remove the ODR-mmbTools software suite and the configuration folder
+   ```
+   bash $HOME/dab-scripts/install/odr-get remove
+   ```
diff --git a/install/odr-get b/install/odr-get
new file mode 100644
index 0000000..a49e7b0
--- /dev/null
+++ b/install/odr-get
@@ -0,0 +1,257 @@
+#!/bin/bash
+
+#    odr-get - Build, install, uninstall, remove the software stack
+#    Copyright (C) 20222 Robin ALEXANDER
+#
+#    This program is free software: you can redistribute it and/or modify
+#    it under the terms of the GNU General Public License as published by
+#    the Free Software Foundation, either version 3 of the License, or
+#    (at your option) any later version.
+#
+#    This program is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+#
+#    You should have received a copy of the GNU General Public License
+#    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+#
+
+## CONSTANTS
+source $(realpath $(dirname $0))/odr-get.conf
+
+print_usage () {
+  cat <<- EOF
+  Usage:
+    odr-get [option] action
+
+  Option:
+    -h, --help           Print this help
+    -b, --branch <name>  Specify the odr-mmbTools branch to use 
+
+  Action:
+    install              Install the programs and the configuration sample
+    remove               Remove the programs and the configuration sample
+
+EOF
+}
+
+install_base () {
+  # Install the essential tools and create the tools root directory
+  sudo apt-get update
+  sudo apt-get install -y build-essential automake libtool supervisor
+
+  if [ ! -d ${DIR_MMB} ]; then
+    mkdir ${DIR_MMB}
+  fi
+
+  if [ ! $(grep inet_http_server /etc/supervisor/supervisord.conf) ]; then
+    cat << EOF | sudo tee -a /etc/supervisor/supervisord.conf > /dev/null
+
+[inet_http_server]
+port = 8001
+username = odr ; Auth username
+password = odr ; Auth password
+EOF
+  fi
+}
+
+install_audioenc () {
+  # Install mmb-tools: audio encoder
+  sudo apt-get install -y libzmq3-dev libzmq5 libvlc-dev vlc-data vlc-plugin-base libcurl4-openssl-dev pkg-config
+  if [ ! -d ${DIR_AUDIO} ]; then
+    pushd ${DIR_MMB}
+    git clone https://github.com/Opendigitalradio/ODR-AudioEnc.git --branch ${1}
+    popd
+  fi
+  pushd ${DIR_AUDIO}
+  ./bootstrap
+  ./configure --enable-vlc
+  make
+  sudo make install
+  popd
+}
+
+install_padenc () {
+  # Install mmb-tools: PAD encoder
+  sudo apt-get install -y libmagickwand-dev
+  if [ ! -d ${DIR_PAD} ]; then
+    pushd ${DIR_MMB}
+    git clone https://github.com/Opendigitalradio/ODR-PadEnc.git --branch ${1}
+    popd
+  fi
+  pushd ${DIR_PAD}
+  ./bootstrap
+  ./configure
+  make
+  sudo make install
+  popd
+}
+
+install_dabmux () {
+  # Install mmb-tools: dab multiplexer
+  sudo apt-get install -y libboost-system-dev libcurl4-openssl-dev python3-zmq
+  if [ ! -d ${DIR_MUX} ]; then
+    pushd ${DIR_MMB}
+    git clone https://github.com/Opendigitalradio/ODR-DabMux.git --branch ${1}
+    popd
+  fi
+  pushd ${DIR_MUX}
+  ./bootstrap.sh
+  ## Temporary, until ODR-DabMux configure is modified
+  arch=$(uname -m)
+  if [ "${arch}" = "armv7l" ]; then
+    ./configure --with-boost-libdir=/usr/lib/arm-linux-gnueabihf
+  else
+    ./configure
+  fi
+  make
+  sudo make install
+  popd
+}
+
+install_dabmod () {
+  # Install mmb-tools: modulator
+  sudo apt-get install -y libfftw3-dev libsoapysdr-dev
+  if [ ! -d ${DIR_MOD} ]; then
+    pushd ${DIR_MMB}
+    git clone https://github.com/Opendigitalradio/ODR-DabMod.git --branch ${1}
+    popd
+  fi
+  pushd ${DIR_MOD}
+  ./bootstrap.sh
+  ./configure CFLAGS="-O3 -DNDEBUG" CXXFLAGS="-O3 -DNDEBUG" --enable-fast-math --disable-output-uhd --disable-zeromq
+  make
+  sudo make install
+  popd
+}
+
+install_fdkaac () {
+  # Install mmb-tools: fdk-aac
+  if [ ! -d ${DIR_FDKAAC} ]; then
+    pushd ${DIR_MMB}
+    git clone https://github.com/Opendigitalradio/fdk-aac.git
+    popd
+  fi
+  pushd ${DIR_FDKAAC}
+  ./bootstrap
+  ./configure
+  make
+  sudo make install
+  popd
+}
+
+install_srccmp () {
+  # Install mmb-tools: source companion
+  if [ ! -d ${DIR_SRCCMP} ]; then
+    pushd ${DIR_MMB}
+    git clone https://github.com/Opendigitalradio/ODR-SourceCompanion.git --branch ${1}
+    popd
+  fi
+  pushd ${DIR_SRCCMP}
+  ./bootstrap
+  ./configure
+  make
+  sudo make install
+  popd
+}
+
+install_encmgr () {
+  # Install mmb-tools: encoder manager
+  sudo apt-get install -y python3-cherrypy3 python3-jinja2 python3-serial python3-yaml supervisor python3-pysnmp4
+  if [ ! -d ${DIR_ENCMGR} ]; then
+    pushd ${DIR_MMB}
+    git clone https://github.com/Opendigitalradio/ODR-EncoderManager.git --branch ${1}
+    popd
+  fi
+  ## Add the current user to the dialout and audio groups
+  sudo usermod --append --group dialout $(id --user --name)
+  sudo usermod --append --group audio $(id --user --name)
+}
+
+install_config () {
+# Copy the configuration files
+  if [ -d ${DIR_CONFIG} ]; then
+    rm -r ${DIR_CONFIG}
+  fi
+  cp -r $(realpath $(dirname $0))/${CONFIG_NAME} ${DIR_CONFIG}
+  sudo ln -s ${DIR_CONFIG}/supervisor/*.conf /etc/supervisor/conf.d/
+
+  ## Adapt the supervisor configuration files
+  sed -e "s;user=pi;user=$(id --user --name);g" -i ${DIR_CONFIG}/supervisor/*.conf
+  sed -e "s;group=pi;group=$(id --group --name);g" -i ${DIR_CONFIG}/supervisor/*.conf
+  sed -e "s;/home/pi;${HOME};g" -i ${HOME}/config/supervisor/*.conf
+
+  ## Adapt the ODR-EncoderManager configuration file
+  sed -e "s;/home/pi;${HOME};g" -i ${DIR_CONFIG}/encodermanager.json
+  sed -e "s;\"user\": \"pi\";\"user\": \"$(id --user --name)\";g" -i ${DIR_CONFIG}/encodermanager.json
+  sed -e "s;\"group\": \"pi\";\"group\": \"$(id --group --name)\";g" -i ${DIR_CONFIG}/encodermanager.json
+
+  ## Adapt the odr-misc.conf
+  sed -e "s;--host=raspberrypi.local;--host=$(hostname -I | awk '{print $1}');" -i ${DIR_CONFIG}/supervisor/ODR-misc.conf
+
+  ## Restart supervisor
+  sudo supervisorctl reread
+  sudo supervisorctl reload
+
+  echo "Sample configuration files installed"
+}
+
+install () {
+  # Clone the sources, build and install programs
+  install_base ${1}
+  install_fdkaac ${1}
+  install_audioenc ${1}
+  install_padenc ${1}
+  install_dabmux ${1}
+  install_dabmod ${1}
+  install_srccmp ${1}
+  install_encmgr ${1}
+  install_config
+  sudo ldconfig
+
+  echo "ODR-mmbTools suite and configuration files installed"
+}
+
+remove () {
+  # Uninstall programs
+  for makefile in $(ls ${DIR_MMB}/**/Makefile); do
+    pushd $(dirname ${makefile})
+    sudo make uninstall
+    popd
+  done
+
+  # Delete sources
+  rm -rf ${DIR_MMB}
+
+  # Delete configuration files
+  rm -rf ${DIR_CONFIG}
+
+  # Update supervisor
+  sudo rm /etc/supervisor/conf.d/ODR-*
+  sudo supervisorctl reread
+  sudo supervisorctl reload
+
+  echo "ODR-mmbTools suite and configuration files removed"
+}
+
+# MAIN PROGRAM
+branch="master"
+action=""
+
+while [ "$#" -gt 0 ] ; do
+  case "${1}" in
+    (-h|--help) print_usage; exit 0 ;;
+    (-b|--branch) branch="${2}" ; shift ;;
+    install) action="install" ;;
+    remove) action="remove" ;;
+    *) print_usage; exit 1 ;;
+  esac
+  shift
+done
+
+if [ "${action}" == "install" ]; then
+  install ${branch}
+else 
+  remove
+fi
\ No newline at end of file
diff --git a/install/odr-get.conf b/install/odr-get.conf
new file mode 100644
index 0000000..e20380d
--- /dev/null
+++ b/install/odr-get.conf
@@ -0,0 +1,11 @@
+# DEFINE DIRECTORIES
+CONFIG_NAME=config
+DIR_CONFIG=${HOME}/${CONFIG_NAME}
+DIR_MMB=${HOME}/ODR-mmbTools
+DIR_AUDIO=${DIR_MMB}/ODR-AudioEnc
+DIR_PAD=${DIR_MMB}/ODR-PadEnc
+DIR_MUX=${DIR_MMB}/ODR-DabMux
+DIR_MOD=${DIR_MMB}/ODR-DabMod
+DIR_FDKAAC=${DIR_MMB}/fdk-aac
+DIR_SRCCMP=${DIR_MMB}/ODR-SourceCompanion
+DIR_ENCMGR=${DIR_MMB}/ODR-EncoderManager
\ No newline at end of file
diff --git a/vagrant/README.md b/vagrant/README.md
new file mode 100644
index 0000000..4162d01
--- /dev/null
+++ b/vagrant/README.md
@@ -0,0 +1,29 @@
+# Introduction
+[Vagrant](https://www.vagrantup.com) provides easy to configure, reproducible, and portable work environments on top of virtual management software like [Virtualbox](https://www.virtualbox.org/).
+
+With Vagrant and Virtualbox, you can run the ODR-mmbTools regardless of the operating system you are using, such as Windows, MacOS, *BSD or any non-Debian Linux.
+
+# Setup
+1. Install Virtualbox for your operating system
+1. Install the Virtualbox Extension pack
+1. Install Vagrant for your operating system
+1. Create and start the virtual environment:
+    ```
+    cd $HOME/dab-scripts/vagrant
+    vagrant up
+    ```
+1. Access the virtual session to build the ODR-mmbTools suite:
+    ```
+    vagrant ssh
+    ```
+1. Follow the instructions of the **README.md** in the install folder to build the ODR-mmbTools suite
+
+# Operations
+Once the ODR-mmbTools are installed, you no longer need to access the virtual session, unless you need to make configuration changes.
+
+Here are the url to access the following web interfaces:
+- Supervisor: http://localhost:8001
+- Multiplex Manager: http://localhost:8002
+- Encoder Manager: http://localhost:8003
+
+You can monitor the output of odr-DabMux with dablin on localhost:9201
\ No newline at end of file
diff --git a/vagrant/Vagrantfile b/vagrant/Vagrantfile
new file mode 100644
index 0000000..76384e3
--- /dev/null
+++ b/vagrant/Vagrantfile
@@ -0,0 +1,15 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+Vagrant.configure("2") do |config|
+    config.vm.box = "generic/debian11"
+    config.vm.network "forwarded_port", guest: 8001, host: 8001
+    config.vm.network "forwarded_port", guest: 8002, host: 8002
+    config.vm.network "forwarded_port", guest: 8003, host: 8003
+    config.vm.network "forwarded_port", guest: 9201, host: 9201
+    config.vm.provider "virtualbox" do |vb|
+      vb.name = "dab_tx"
+      vb.customize ['modifyvm', :id, '--usbxhci', 'on']
+    end
+  end
+  
\ No newline at end of file