diff options
| -rw-r--r-- | README.md | 40 |
1 files changed, 32 insertions, 8 deletions
@@ -10,17 +10,49 @@ This project contains a web user interface for controlling a 1. Allow the user to send custom packets 1. Configure igate and other settings, stored in `node-config.toml` +## Installation + +To get cats-radio-node running on your raspberry pi + +1. Prepare an SD card with latest Raspberry Pi OS, and boot your pi with it +1. using `raspi-config`, enable the SPI Interface +1. `mkdir cats-radio-node` and `cd cats-radio-node` +1. `wget https://mpb.li/pv/cats-radio-node-20240128.tar.gz` +1. `tar -xf cats-radio-node-20240128.tar.gz` +1. `sudo ./cats-radio-node` +1. And connect to it through HTTP on port 3000 + +If you want to compile it yourself: + +1. Do `sudo apt update`, install `git` +1. Install most recent rust compiler with rustup: + `curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh` + * Careful when installing Rust on a Raspberry Pi with a 64-bit kernel running a 32-bit userland: `rustup` will want + to install the aarch64 toolchain, but that one doesn't work! + * If that happens, be sure to install the `stable-arm-unknown-linux-gnueabihf` toolchain. + * You either have to log out and log in again or source the env as instructed by `rustup` to have the Rust compiler in + your $PATH + +1. `git clone https://mpb.li/git/cats-radio-node/` +1. `cd cats-radio-node` +1. `cargo build --bin cats-radio-node` +1. `sudo target/debug/cats-radio-node` + ## Current state of the project Configuration read/write through UI is done. + RF4463 integration, message decoding and presentation, UI to send messages. + Tunnel IP packets through Arbitrary whiskers, using TUN. + Live update of incoming packets using WebSocket, in the 'Chat' window. ### TODO: * Nicer UI for presenting incoming packets. For now it just shows the Comment whisker. * igate integration +* Regular beacon transmission ## Additional tools @@ -33,11 +65,3 @@ The `fake-radio` binary can be used to inject frames for that, and decodes those Build with `cargo build --bin fake-radio` -## Remarks - -Careful when installing Rust on a Raspberry Pi with a 64-bit kernel running a 32-bit userland: `rustup` will want -to install the aarch64 toolchain, but that one doesn't work! - -If that happens, be sure to select the `stable-arm-unknown-linux-gnueabihf` toolchain, and set it as default using -`rustup default`. - |