1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
|
//
// Copyright 2011 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
module u1e
(input CLK_FPGA_P, input CLK_FPGA_N, // Diff
output [3:0] debug_led, output [31:0] debug, output [1:0] debug_clk,
input debug_pb, output FPGA_TXD, input FPGA_RXD,
// GPMC
input EM_CLK, inout [15:0] EM_D, input [10:1] EM_A, input [1:0] EM_NBE,
input EM_WAIT0, input EM_NCS4, input EM_NCS5, input EM_NCS6,
input EM_NWE, input EM_NOE,
inout db_sda, inout db_scl, // I2C
output db_sclk_tx, output db_sen_tx, output db_mosi_tx, input db_miso_tx, // DB TX SPI
output db_sclk_rx, output db_sen_rx, output db_mosi_rx, input db_miso_rx, // DB TX SPI
output sclk_codec, output sen_codec, output mosi_codec, input miso_codec, // AD9862 main SPI
output cgen_sclk, output cgen_sen_b, output cgen_mosi, input cgen_miso, // Clock gen SPI
input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel,
output overo_gpio144, output overo_gpio145, output overo_gpio146, output overo_gpio147, // Fifo controls
input overo_gpio0, input overo_gpio14, input overo_gpio21, input overo_gpio22, // Misc GPIO
input overo_gpio23, input overo_gpio64, input overo_gpio65, input overo_gpio127, // Misc GPIO
input overo_gpio128, input overo_gpio163, input overo_gpio170, input overo_gpio176, // Misc GPIO
inout [15:0] io_tx, inout [15:0] io_rx,
output [13:0] TX, output TXSYNC, output TXBLANK,
input [11:0] DA, input [11:0] DB, input RXSYNC,
input PPS_IN
);
// /////////////////////////////////////////////////////////////////////////
// Clocking
wire clk_fpga, clk_fpga_in;
IBUFGDS #(.IOSTANDARD("LVDS_33"), .DIFF_TERM("TRUE"))
clk_fpga_pin (.O(clk_fpga_in),.I(CLK_FPGA_P),.IB(CLK_FPGA_N));
wire clk_2x, dcm_rst, dcm_locked, clk_fb;
DCM #(.CLK_FEEDBACK ( "1X" ),
.CLKDV_DIVIDE ( 2 ),
.CLKFX_DIVIDE ( 2 ),
.CLKFX_MULTIPLY ( 2 ),
.CLKIN_DIVIDE_BY_2 ( "FALSE" ),
.CLKIN_PERIOD ( 15.625 ),
.CLKOUT_PHASE_SHIFT ( "NONE" ),
.DESKEW_ADJUST ( "SYSTEM_SYNCHRONOUS" ),
.DFS_FREQUENCY_MODE ( "LOW" ),
.DLL_FREQUENCY_MODE ( "LOW" ),
.DUTY_CYCLE_CORRECTION ( "TRUE" ),
.FACTORY_JF ( 16'h8080 ),
.PHASE_SHIFT ( 0 ),
.STARTUP_WAIT ( "FALSE" ))
clk_doubler (.CLKFB(clk_fb), .CLKIN(clk_fpga_in), .RST(dcm_rst),
.DSSEN(0), .PSCLK(0), .PSEN(0), .PSINCDEC(0), .PSDONE(),
.CLKDV(), .CLKFX(), .CLKFX180(),
.CLK2X(clk_2x), .CLK2X180(),
.CLK0(clk_fb), .CLK90(clk_fpga), .CLK180(), .CLK270(),
.LOCKED(dcm_locked), .STATUS());
// /////////////////////////////////////////////////////////////////////////
// SPI
wire mosi, sclk, miso;
assign { db_sclk_tx, db_mosi_tx } = ~db_sen_tx ? {sclk,mosi} : 2'b0;
assign { db_sclk_rx, db_mosi_rx } = ~db_sen_rx ? {sclk,mosi} : 2'b0;
assign { sclk_codec, mosi_codec } = ~sen_codec ? {sclk,mosi} : 2'b0;
assign { cgen_sclk, cgen_mosi } = ~cgen_sen_b ? {sclk,mosi} : 2'b0;
assign miso = (~db_sen_tx & db_miso_tx) | (~db_sen_rx & db_miso_rx) |
(~sen_codec & miso_codec) | (~cgen_sen_b & cgen_miso);
// /////////////////////////////////////////////////////////////////////////
// TX DAC -- handle the interleaved data bus to DAC, with clock doubling DLL
assign TXBLANK = 0;
wire [13:0] tx_i, tx_q;
reg[13:0] delay_q;
always @(posedge clk_fpga)
delay_q <= tx_q;
genvar i;
generate
for(i=0;i<14;i=i+1)
begin : gen_dacout
ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1"
.INIT(1'b0), // Sets initial state of the Q output to 1'b0 or 1'b1
.SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset
ODDR2_inst (.Q(TX[i]), // 1-bit DDR output data
.C0(clk_fpga), // 1-bit clock input
.C1(~clk_fpga), // 1-bit clock input
.CE(1'b1), // 1-bit clock enable input
.D0(tx_i[i]), // 1-bit data input (associated with C0)
.D1(delay_q[i]), // 1-bit data input (associated with C1)
.R(1'b0), // 1-bit reset input
.S(1'b0)); // 1-bit set input
end // block: gen_dacout
endgenerate
ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1"
.INIT(1'b0), // Sets initial state of the Q output to 1'b0 or 1'b1
.SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset
ODDR2_txsnc (.Q(TXSYNC), // 1-bit DDR output data
.C0(clk_fpga), // 1-bit clock input
.C1(~clk_fpga), // 1-bit clock input
.CE(1'b1), // 1-bit clock enable input
.D0(1'b0), // 1-bit data input (associated with C0)
.D1(1'b1), // 1-bit data input (associated with C1)
.R(1'b0), // 1-bit reset input
.S(1'b0)); // 1-bit set input
// /////////////////////////////////////////////////////////////////////////
// Main U1E Core
u1e_core u1e_core(.clk_fpga(clk_fpga), .bus_clk(clk_2x), .rst_fpga(~debug_pb),
.debug_led(debug_led), .debug(debug), .debug_clk(debug_clk),
.debug_txd(FPGA_TXD), .debug_rxd(FPGA_RXD),
.EM_CLK(EM_CLK), .EM_D(EM_D), .EM_A(EM_A), .EM_NBE(EM_NBE),
.EM_WAIT0(EM_WAIT0), .EM_NCS4(EM_NCS4), .EM_NCS5(EM_NCS5),
.EM_NCS6(EM_NCS6), .EM_NWE(EM_NWE), .EM_NOE(EM_NOE),
.db_sda(db_sda), .db_scl(db_scl),
.sclk(sclk), .sen({cgen_sen_b,sen_codec,db_sen_tx,db_sen_rx}), .mosi(mosi), .miso(miso),
.cgen_st_status(cgen_st_status), .cgen_st_ld(cgen_st_ld),.cgen_st_refmon(cgen_st_refmon),
.cgen_sync_b(cgen_sync_b), .cgen_ref_sel(cgen_ref_sel),
.tx_have_space(overo_gpio144), .tx_underrun(overo_gpio145),
.rx_have_data(overo_gpio146), .rx_overrun(overo_gpio147),
.io_tx(io_tx), .io_rx(io_rx),
.tx_i(tx_i), .tx_q(tx_q),
.rx_i(DA), .rx_q(DB),
.misc_gpio( {{overo_gpio128,overo_gpio163,overo_gpio170,overo_gpio176},
{overo_gpio0,overo_gpio14,overo_gpio21,overo_gpio22},
{overo_gpio23,overo_gpio64,overo_gpio65,overo_gpio127}}),
.pps_in(PPS_IN) );
// /////////////////////////////////////////////////////////////////////////
// Local Debug
// assign debug_clk = {clk_fpga, clk_2x };
// assign debug = { TXSYNC, TXBLANK, TX };
endmodule // u1e
|
