1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
|
module gpmc_wb
(input EM_CLK, inout [15:0] EM_D, input [10:1] EM_A, input [1:0] EM_NBE,
input EM_NCS, input EM_NWE, input EM_NOE,
input wb_clk, input wb_rst,
output reg [10:0] wb_adr_o, output reg [15:0] wb_dat_mosi, input [15:0] wb_dat_miso,
output reg [1:0] wb_sel_o, output wb_cyc_o, output reg wb_stb_o, output reg wb_we_o, input wb_ack_i);
// ////////////////////////////////////////////
// Control Path, Wishbone bus bridge (wb master)
reg [1:0] cs_del, we_del, oe_del;
// Synchronize the async control signals
always @(posedge wb_clk)
begin
cs_del <= { cs_del[0], EM_NCS };
we_del <= { we_del[0], EM_NWE };
oe_del <= { oe_del[0], EM_NOE };
end
always @(posedge wb_clk)
if(cs_del == 2'b10) // Falling Edge
wb_adr_o <= { EM_A, 1'b0 };
always @(posedge wb_clk)
if(we_del == 2'b10) // Falling Edge
begin
wb_dat_mosi <= EM_D;
wb_sel_o <= ~EM_NBE;
end
reg [15:0] EM_D_hold;
always @(posedge wb_clk)
if(wb_ack_i)
EM_D_hold <= wb_dat_miso;
assign EM_D = wb_ack_i ? wb_dat_miso : EM_D_hold;
assign wb_cyc_o = wb_stb_o;
always @(posedge wb_clk)
if(~cs_del[0] & (we_del == 2'b10) )
wb_we_o <= 1;
else if(wb_ack_i) // Turn off we when done. Could also use we_del[0], others...
wb_we_o <= 0;
// FIXME should this look at cs_del[1]?
always @(posedge wb_clk)
if(~cs_del[0] & ((we_del == 2'b10) | (oe_del == 2'b10)))
wb_stb_o <= 1;
else if(wb_ack_i)
wb_stb_o <= 0;
endmodule // gpmc_wb
|
