1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
|
//////////////////////////////////////////////////////////////////////////////////
module gpmc
(// GPMC signals
input EM_CLK, inout [15:0] EM_D, input [10:1] EM_A, input [1:0] EM_NBE,
input EM_WAIT0, input EM_NCS4, input EM_NCS6, input EM_NWE, input EM_NOE,
// GPIOs for FIFO signalling
output rx_have_data, output tx_have_space,
// Wishbone signals
input wb_clk, input wb_rst,
output [10:0] wb_adr_o, output [15:0] wb_dat_mosi, input [15:0] wb_dat_miso,
output [1:0] wb_sel_o, output wb_cyc_o, output wb_stb_o, output wb_we_o, input wb_ack_i,
// FIFO interface
input fifo_clk, input fifo_rst,
output [35:0] tx_data_o, output tx_src_rdy_o, input tx_dst_rdy_i,
input [35:0] rx_data_i, input rx_src_rdy_i, output rx_dst_rdy_o,
output [31:0] debug
);
wire EM_output_enable = (~EM_NOE & (~EM_NCS4 | ~EM_NCS6));
wire [15:0] EM_D_ram;
wire [15:0] EM_D_wb;
assign EM_D = ~EM_output_enable ? 16'bz : ~EM_NCS4 ? EM_D_ram : EM_D_wb;
// CS4 is RAM_2PORT for DATA PATH (high-speed data)
// Writes go into one RAM, reads come from the other
// CS6 is for CONTROL PATH (wishbone)
// ////////////////////////////////////////////
// TX Data Path
wire [17:0] tx18_data, tx18b_data;
wire tx18_src_rdy, tx18_dst_rdy, tx18b_src_rdy, tx18b_dst_rdy;
wire [15:0] tx_fifo_space, tx_frame_len;
assign tx_frame_len = 10;
gpmc_to_fifo gpmc_to_fifo
(.EM_CLK(EM_CLK), .EM_D(EM_D), .EM_NBE(EM_NBE), .EM_NCS(EM_NCS4), .EM_NWE(EM_NWE),
.fifo_clk(fifo_clk), .fifo_rst(fifo_rst),
.data_o(tx18_data), .src_rdy_o(tx18_src_rdy), .dst_rdy_i(tx18_dst_rdy),
.frame_len(tx_frame_len), .fifo_space(tx_fifo_space), .fifo_ready(tx_have_space));
fifo_cascade #(.WIDTH(18), .SIZE(10)) tx_fifo
(.clk(fifo_clk), .reset(fifo_rst), .clear(0),
.datain(tx18_data), .src_rdy_i(tx18_src_rdy), .dst_rdy_o(tx18_dst_rdy), .space(tx_fifo_space),
.dataout(tx18b_data), .src_rdy_o(tx18b_src_rdy), .dst_rdy_i(tx18b_dst_rdy));
fifo19_to_fifo36 f19_to_f36
(.clk(fifo_clk), .reset(fifo_rst), .clear(0),
.f19_datain({1'b0,tx18b_data}), .f19_src_rdy_i(tx18b_src_rdy), .f19_dst_rdy_o(tx18b_dst_rdy),
.f36_dataout(tx_data_o), .f36_src_rdy_o(tx_src_rdy_o), .f36_dst_rdy_i(tx_dst_rdy_i));
// ////////////////////////////////////////////
// RX Data Path
wire read_sel_rx, write_sel_rx, clear_rx;
wire read_done_rx;
edge_sync #(.POSEDGE(0))
edge_sync_rx(.clk(wb_clk), .rst(wb_rst),
.sig(~EM_NCS4 & ~EM_NOE & (EM_A == 10'h3FF)), .trig(read_done_rx));
ram_2port_mixed_width buffer_rx
(.clk16(wb_clk), .en16(~EM_NCS4), .we16(0), .addr16({read_sel_rx,EM_A}), .di16(0), .do16(EM_D_ram),
.clk32(ram_clk), .en32(write_en), .we32(write_en), .addr32({write_sel_rx,write_addr}), .di32(write_data), .do32());
dbsm dbsm_rx(.clk(wb_clk), .reset(wb_rst), .clear(clear_rx),
.read_sel(read_sel_rx), .read_ready(rx_have_data), .read_done(read_done_rx),
.write_sel(write_sel_rx), .write_ready(write_ready), .write_done(write_done));
// ////////////////////////////////////////////
// Control path on CS6
gpmc_wb gpmc_wb
(.EM_CLK(EM_CLK), .EM_D(EM_D_wb), .EM_A(EM_A), .EM_NBE(EM_NBE),
.EM_NCS(EM_NCS6), .EM_NWE(EM_NWE), .EM_NOE(EM_NOE),
.wb_clk(wb_clk), .wb_rst(wb_rst),
.wb_adr_o(wb_adr_o), .wb_dat_mosi(wb_dat_mosi), .wb_dat_miso(wb_dat_miso),
.wb_sel_o(wb_sel_o), .wb_cyc_o(wb_cyc_o), .wb_stb_o(wb_stb_o), .wb_we_o(wb_we_o),
.wb_ack_i(wb_ack_i) );
assign debug = 0;
endmodule // gpmc
|
