1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
|
// Frame DSP packets with a header line to be handled by the protocol machine
module dsp_framer36
#(parameter BUF_SIZE = 9)
(
input clk, input rst, input clr,
input [35:0] inp_data, input inp_valid, output inp_ready,
output [35:0] out_data, output out_valid, input out_ready
);
localparam DSP_FRM_STATE_WAIT_SOF = 0;
localparam DSP_FRM_STATE_WAIT_EOF = 1;
localparam DSP_FRM_STATE_WRITE_HDR = 2;
localparam DSP_FRM_STATE_WRITE = 3;
reg [1:0] dsp_frm_state;
reg [BUF_SIZE-1:0] dsp_frm_addr;
reg [BUF_SIZE-1:0] dsp_frm_count;
wire [BUF_SIZE-1:0] dsp_frm_addr_next = dsp_frm_addr + 1'b1;
//DSP input stream ready in the following states
assign inp_ready =
(dsp_frm_state == DSP_FRM_STATE_WAIT_SOF)? 1'b1 : (
(dsp_frm_state == DSP_FRM_STATE_WAIT_EOF)? 1'b1 : (
1'b0));
//DSP framer output data mux (header or BRAM):
//The header is generated here from the count.
wire [31:0] dsp_frm_data_bram;
wire [15:0] dsp_frm_bytes = {dsp_frm_count, 2'b00};
wire dsp_frm_enb = (dsp_frm_state == DSP_FRM_STATE_WRITE)? (out_ready & out_valid) : 1'b1;
assign out_data =
(dsp_frm_state == DSP_FRM_STATE_WRITE_HDR)? {4'b0001, 16'b1, dsp_frm_bytes} : (
(dsp_frm_addr == dsp_frm_count) ? {4'b0010, dsp_frm_data_bram} : (
{4'b0000, dsp_frm_data_bram}));
assign out_valid = (
(dsp_frm_state == DSP_FRM_STATE_WRITE_HDR) ||
(dsp_frm_state == DSP_FRM_STATE_WRITE)
)? 1'b1 : 1'b0;
RAMB16_S36_S36 dsp_frm_buff(
//port A = DSP input interface (writes to BRAM)
.DOA(),.ADDRA(dsp_frm_addr),.CLKA(clk),.DIA(inp_data[31:0]),.DIPA(4'h0),
.ENA(inp_ready),.SSRA(0),.WEA(inp_ready),
//port B = DSP framer interface (reads from BRAM)
.DOB(dsp_frm_data_bram),.ADDRB(dsp_frm_addr),.CLKB(clk),.DIB(36'b0),.DIPB(4'h0),
.ENB(dsp_frm_enb),.SSRB(0),.WEB(1'b0)
);
always @(posedge clk)
if(rst | clr) begin
dsp_frm_state <= DSP_FRM_STATE_WAIT_SOF;
dsp_frm_addr <= 0;
end
else begin
case(dsp_frm_state)
DSP_FRM_STATE_WAIT_SOF: begin
if (inp_ready & inp_valid & inp_data[32]) begin
dsp_frm_addr <= dsp_frm_addr_next;
dsp_frm_state <= DSP_FRM_STATE_WAIT_EOF;
end
end
DSP_FRM_STATE_WAIT_EOF: begin
if (inp_ready & inp_valid) begin
if (inp_data[33]) begin
dsp_frm_count <= dsp_frm_addr_next;
dsp_frm_addr <= 0;
dsp_frm_state <= DSP_FRM_STATE_WRITE_HDR;
end
else begin
dsp_frm_addr <= dsp_frm_addr_next;
end
end
end
DSP_FRM_STATE_WRITE_HDR: begin
if (out_ready & out_valid) begin
dsp_frm_addr <= dsp_frm_addr_next;
dsp_frm_state <= DSP_FRM_STATE_WRITE;
end
end
DSP_FRM_STATE_WRITE: begin
if (out_ready & out_valid) begin
if (out_data[33]) begin
dsp_frm_addr <= 0;
dsp_frm_state <= DSP_FRM_STATE_WAIT_SOF;
end
else begin
dsp_frm_addr <= dsp_frm_addr_next;
end
end
end
endcase //dsp_frm_state
end
endmodule //dsp_framer36
|
