1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
|
//
// Copyright 2011 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
// This module takes the settings bus on one clock domain and crosses it over to another domain
// Typically it will be used with the input settings bus on the wishbone clock, and either
// the system or dsp clock on the output side
module settings_bus_crossclock
(input clk_i, input rst_i, input set_stb_i, input [7:0] set_addr_i, input [31:0] set_data_i,
input clk_o, input rst_o, output set_stb_o, output [7:0] set_addr_o, output [31:0] set_data_o);
wire full, empty;
fifo_xlnx_16x40_2clk settings_fifo
(.rst(rst_i),
.wr_clk(clk_i), .din({set_addr_i,set_data_i}), .wr_en(set_stb_i & ~full), .full(full),
.rd_clk(clk_o), .dout({set_addr_o,set_data_o}), .rd_en(~empty), .empty(empty));
assign set_stb_o = ~empty;
endmodule // settings_bus_crossclock
|
