blob: a320f86cb7579c492ffe2438223f176896628334 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
|
========================================================================
UHD - Daughterboard Application Notes
========================================================================
.. contents:: Table of Contents
------------------------------------------------------------------------
Daughterboard Properties
------------------------------------------------------------------------
The following contains interesting notes about each daughterboard.
Eventually, this page will be expanded to list out the full
properties of each board as well.
^^^^^^^^^^^^^^^^^^^^^^^^^^^
Basic RX and and LFRX
^^^^^^^^^^^^^^^^^^^^^^^^^^^
The Basic RX and LFRX boards have 3 subdevices:
* **Subdevice A:** real signal on antenna RXA
* **Subdevice B:** real signal on antenna RXB
* **Subdevice AB:** quadrature subdevice using both antennas
The boards have no tunable elements or programmable gains.
Though the magic of aliasing, you can down-convert signals
greater than the nyquist rate of the ADC.
^^^^^^^^^^^^^^^^^^^^^^^^^^^
Basic TX and and LFTX
^^^^^^^^^^^^^^^^^^^^^^^^^^^
The Basic TX and LFTX boards have 1 quadrature subdevice using both antennas.
The boards have no tunable elements or programmable gains.
Though the magic of aliasing, you can up-convert signals
greater than the nyquist rate of the DAC.
^^^^^^^^^^^^^^^^^^^^^^^^^^^
RFX Series
^^^^^^^^^^^^^^^^^^^^^^^^^^^
Transmit Antennas: **TX/RX**
Receive Antennas: **TX/RX** or **RX2**
The user may set the receive antenna to be TX/RX or RX2.
However, when using an RFX board in full-duplex mode,
the receive antenna will always be set to RX2, regardless of the settings.
^^^^^^^^^^^^^^^^^^^^^^^^^^^
XCVR 2450
^^^^^^^^^^^^^^^^^^^^^^^^^^^
The XCVR2450 has a non-contiguous tuning range consiting of a high band and a low band.
The high band consists of frequencies between...TODO
Transmit Antennas: **J1** or **J2**
Receive Antennas: **J1** or **J2**
When using the XCVR2450 in full-duplex mode,
the user must set the receive antenna and the transmit antenna to be different;
not doing so will yeild undefined results.
The XCVR2450 uses a common LO for both receive and transmit.
Even though the API allows the RX and TX LOs to be individually set,
a change of one LO setting will be reflected in the other LO setting.
^^^^^^^^^^^^^^^^^^^^^^^^^^^
WBX Series
^^^^^^^^^^^^^^^^^^^^^^^^^^^
Transmit Antennas: **TX/RX**
Receive Antennas: **TX/RX** or **RX2**
The user may set the receive antenna to be TX/RX or RX2.
However, when using an RFX board in full-duplex mode,
the receive antenna will always be set to RX2, regardless of the settings.
|
