1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
|
//
// Copyright 2011 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
//////////////////////////////////////////////////////////////////////////////////
module gpmc_async
#(parameter TXFIFOSIZE = 11,
parameter RXFIFOSIZE = 11,
parameter BUSDEBUG = 1)
(// GPMC signals
input arst, input bus_clk,
input EM_CLK, inout [15:0] EM_D, input [10:1] EM_A, input [1:0] EM_NBE,
input EM_WAIT0, input EM_NCS4, input EM_NCS6, input EM_NWE, input EM_NOE,
// GPIOs for FIFO signalling
output rx_have_data, output tx_have_space, output reg bus_error, input bus_reset,
// Wishbone signals
input wb_clk, input wb_rst,
output [10:0] wb_adr_o, output [15:0] wb_dat_mosi, input [15:0] wb_dat_miso,
output [1:0] wb_sel_o, output wb_cyc_o, output wb_stb_o, output wb_we_o, input wb_ack_i,
// FIFO interface
input fifo_clk, input fifo_rst, input clear_tx, input clear_rx,
output [35:0] tx_data_o, output tx_src_rdy_o, input tx_dst_rdy_i,
input [35:0] rx_data_i, input rx_src_rdy_i, output rx_dst_rdy_o,
input [15:0] tx_frame_len, output [15:0] rx_frame_len,
output tx_underrun, output rx_overrun,
input [7:0] test_rate, input [3:0] test_ctrl,
output [31:0] debug
);
wire EM_output_enable = (~EM_NOE & (~EM_NCS4 | ~EM_NCS6));
wire [15:0] EM_D_fifo;
wire [15:0] EM_D_wb;
assign EM_D = ~EM_output_enable ? 16'bz : ~EM_NCS4 ? EM_D_fifo : EM_D_wb;
wire bus_error_tx, bus_error_rx;
always @(posedge fifo_clk)
if(fifo_rst | clear_tx | clear_rx)
bus_error <= 0;
else
bus_error <= bus_error_tx | bus_error_rx;
// CS4 is RAM_2PORT for DATA PATH (high-speed data)
// Writes go into one RAM, reads come from the other
// CS6 is for CONTROL PATH (wishbone)
// ////////////////////////////////////////////
// TX Data Path
wire [17:0] tx18_data;
wire tx18_src_rdy, tx18_dst_rdy;
wire [15:0] tx_fifo_space;
wire [35:0] tx36_data, tx_data;
wire tx36_src_rdy, tx36_dst_rdy, tx_src_rdy, tx_dst_rdy;
new_write new_write
(.EM_D(EM_D), .EM_NBE(EM_NBE), .EM_NCS(EM_NCS4), .EM_NWE(EM_NWE),
.bus_clk(bus_clk), .fifo_clk(fifo_clk), .fifo_rst(fifo_rst), .clear(clear_tx),
.data_o(tx18_data), .src_rdy_o(tx18_src_rdy), .dst_rdy_i(tx18_dst_rdy),
.frame_len(tx_frame_len), .fifo_ready(tx_have_space), .bus_error(bus_error_tx) );
fifo19_to_fifo36 #(.LE(1)) f19_to_f36 // Little endian because ARM is LE
(.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
.f19_datain({1'b0,tx18_data}), .f19_src_rdy_i(tx18_src_rdy), .f19_dst_rdy_o(tx18_dst_rdy),
.f36_dataout(tx36_data), .f36_src_rdy_o(tx36_src_rdy), .f36_dst_rdy_i(tx36_dst_rdy));
fifo_cascade #(.WIDTH(36), .SIZE(TXFIFOSIZE)) tx_fifo36
(.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
.datain(tx36_data), .src_rdy_i(tx36_src_rdy), .dst_rdy_o(tx36_dst_rdy),
.dataout(tx_data), .src_rdy_o(tx_src_rdy), .dst_rdy_i(tx_dst_rdy));
// ////////////////////////////////////////////
// RX Data Path
wire [17:0] rx18_data, rx18b_data;
wire rx18_src_rdy, rx18_dst_rdy, rx18b_src_rdy, rx18b_dst_rdy;
wire [15:0] rx_fifo_space;
wire [35:0] rx36_data, rx_data;
wire rx36_src_rdy, rx36_dst_rdy, rx_src_rdy, rx_dst_rdy;
wire dummy;
fifo_cascade #(.WIDTH(36), .SIZE(RXFIFOSIZE)) rx_fifo36
(.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
.datain(rx_data), .src_rdy_i(rx_src_rdy), .dst_rdy_o(rx_dst_rdy),
.dataout(rx36_data), .src_rdy_o(rx36_src_rdy), .dst_rdy_i(rx36_dst_rdy));
wire [31:0] pkt_count;
wire throttle = pkt_count == 16;
fifo36_to_fifo19 #(.LE(1)) f36_to_f19 // Little endian because ARM is LE
(.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
.f36_datain(rx36_data), .f36_src_rdy_i(rx36_src_rdy), .f36_dst_rdy_o(rx36_dst_rdy),
.f19_dataout({dummy,rx18_data}), .f19_src_rdy_o(rx18_src_rdy), .f19_dst_rdy_i(rx18_dst_rdy) );
new_read new_read
(.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
.data_i(rx18_data), .src_rdy_i(rx18_src_rdy), .dst_rdy_o(rx18_dst_rdy),
.EM_D(EM_D_fifo), .EM_NCS(EM_NCS4), .EM_NOE(EM_NOE),
.have_packet(rx_have_data), .frame_len(rx_frame_len), .bus_error(bus_error_rx) );
// ////////////////////////////////////////////
// Control path on CS6
gpmc_wb gpmc_wb
(.EM_CLK(EM_CLK), .EM_D_in(EM_D), .EM_D_out(EM_D_wb), .EM_A(EM_A), .EM_NBE(EM_NBE),
.EM_NCS(EM_NCS6), .EM_NWE(EM_NWE), .EM_NOE(EM_NOE),
.wb_clk(wb_clk), .wb_rst(wb_rst),
.wb_adr_o(wb_adr_o), .wb_dat_mosi(wb_dat_mosi), .wb_dat_miso(wb_dat_miso),
.wb_sel_o(wb_sel_o), .wb_cyc_o(wb_cyc_o), .wb_stb_o(wb_stb_o), .wb_we_o(wb_we_o),
.wb_ack_i(wb_ack_i) );
// assign debug = pkt_count;
// ////////////////////////////////////////////
// Test support, traffic generator, loopback, etc.
// RX side muxes test data into the same stream
wire [35:0] timedrx_data, loopbackrx_data, testrx_data;
wire [35:0] timedtx_data, loopbacktx_data, testtx_data;
wire timedrx_src_rdy, timedrx_dst_rdy, loopbackrx_src_rdy, loopbackrx_dst_rdy,
testrx_src_rdy, testrx_dst_rdy;
wire timedtx_src_rdy, timedtx_dst_rdy, loopbacktx_src_rdy, loopbacktx_dst_rdy,
testtx_src_rdy, testtx_dst_rdy;
wire timedrx_src_rdy_int, timedrx_dst_rdy_int, timedtx_src_rdy_int, timedtx_dst_rdy_int;
wire [31:0] total, crc_err, seq_err, len_err;
wire sel_testtx = test_ctrl[0];
wire sel_loopbacktx = test_ctrl[1];
wire pkt_src_enable = test_ctrl[2];
wire pkt_sink_enable = test_ctrl[3];
fifo36_mux rx_test_mux_lvl_1
(.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
.data0_i(timedrx_data), .src0_rdy_i(timedrx_src_rdy), .dst0_rdy_o(timedrx_dst_rdy),
.data1_i(loopbackrx_data), .src1_rdy_i(loopbackrx_src_rdy), .dst1_rdy_o(loopbackrx_dst_rdy),
.data_o(testrx_data), .src_rdy_o(testrx_src_rdy), .dst_rdy_i(testrx_dst_rdy));
fifo36_mux rx_test_mux_lvl_2
(.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
.data0_i(testrx_data), .src0_rdy_i(testrx_src_rdy), .dst0_rdy_o(testrx_dst_rdy),
.data1_i(rx_data_i), .src1_rdy_i(rx_src_rdy_i), .dst1_rdy_o(rx_dst_rdy_o),
.data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy));
fifo_short #(.WIDTH(36)) loopback_fifo
(.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx | clear_rx),
.datain(loopbacktx_data), .src_rdy_i(loopbacktx_src_rdy), .dst_rdy_o(loopbacktx_dst_rdy),
.dataout(loopbackrx_data), .src_rdy_o(loopbackrx_src_rdy), .dst_rdy_i(loopbackrx_dst_rdy));
// Crossbar used as a demux for switching TX stream to main DSP or to test logic
crossbar36 tx_crossbar_lvl_1
(.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
.cross(sel_testtx),
.data0_i(tx_data), .src0_rdy_i(tx_src_rdy), .dst0_rdy_o(tx_dst_rdy),
.data1_i(tx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input
.data0_o(tx_data_o), .src0_rdy_o(tx_src_rdy_o), .dst0_rdy_i(tx_dst_rdy_i),
.data1_o(testtx_data), .src1_rdy_o(testtx_src_rdy), .dst1_rdy_i(testtx_dst_rdy) );
crossbar36 tx_crossbar_lvl_2
(.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
.cross(sel_loopbacktx),
.data0_i(testtx_data), .src0_rdy_i(testtx_src_rdy), .dst0_rdy_o(testtx_dst_rdy),
.data1_i(testtx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input
.data0_o(timedtx_data), .src0_rdy_o(timedtx_src_rdy), .dst0_rdy_i(timedtx_dst_rdy),
.data1_o(loopbacktx_data), .src1_rdy_o(loopbacktx_src_rdy), .dst1_rdy_i(loopbacktx_dst_rdy) );
// Fixed rate TX traffic consumer
fifo_pacer tx_pacer
(.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_sink_enable),
.src1_rdy_i(timedtx_src_rdy), .dst1_rdy_o(timedtx_dst_rdy),
.src2_rdy_o(timedtx_src_rdy_int), .dst2_rdy_i(timedtx_dst_rdy_int),
.underrun(tx_underrun), .overrun());
packet_verifier32 pktver32
(.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
.data_i(timedtx_data), .src_rdy_i(timedtx_src_rdy_int), .dst_rdy_o(timedtx_dst_rdy_int),
.total(total), .crc_err(crc_err), .seq_err(seq_err), .len_err(len_err));
// Fixed rate RX traffic generator
packet_generator32 pktgen32
(.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
.header({len_err,seq_err,crc_err,total}),
.data_o(timedrx_data), .src_rdy_o(timedrx_src_rdy_int), .dst_rdy_i(timedrx_dst_rdy_int));
fifo_pacer rx_pacer
(.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_src_enable),
.src1_rdy_i(timedrx_src_rdy_int), .dst1_rdy_o(timedrx_dst_rdy_int),
.src2_rdy_o(timedrx_src_rdy), .dst2_rdy_i(timedrx_dst_rdy),
.underrun(), .overrun(rx_overrun));
// FIXME -- hook up crossbar controls
// // FIXME -- collect error stats
// FIXME -- set rates and enables on pacers
// FIXME -- make sure packet completes before we shutoff
// FIXME -- handle overrun and underrun
wire [0:17] dummy18;
assign debug = {rx_overrun, tx_underrun, bus_error_tx, bus_error_rx, tx_have_space, rx_have_data, EM_NCS4, EM_NCS6,
6'd0, EM_NOE, EM_NWE,
pkt_src_enable, pkt_sink_enable, timedrx_src_rdy_int, timedrx_dst_rdy_int,
timedrx_src_rdy, timedrx_dst_rdy,
testrx_src_rdy, testrx_dst_rdy,
rx_src_rdy, rx_dst_rdy, rx36_src_rdy, rx36_dst_rdy, rx18_src_rdy, rx18_dst_rdy, rx18b_src_rdy, rx18b_dst_rdy};
endmodule // gpmc_async
|
