// // Copyright 2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by // the Free Software Foundation, either version 3 of the License, or // (at your option) any later version. // // This program is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. // // You should have received a copy of the GNU General Public License // along with this program. If not, see . // // //////////////////////////////////////////////////////////////////////////////// // Module Name: u2_core // //////////////////////////////////////////////////////////////////////////////// module u2_core (// Clocks input dsp_clk, input wb_clk, output clock_ready, input clk_to_mac, input pps_in, // Misc, debug output [7:0] leds, output [31:0] debug, output [1:0] debug_clk, // Expansion input exp_time_in, output exp_time_out, // GMII // GMII-CTRL input GMII_COL, input GMII_CRS, // GMII-TX output [7:0] GMII_TXD, output GMII_TX_EN, output GMII_TX_ER, output GMII_GTX_CLK, input GMII_TX_CLK, // 100mbps clk // GMII-RX input [7:0] GMII_RXD, input GMII_RX_CLK, input GMII_RX_DV, input GMII_RX_ER, // GMII-Management inout MDIO, output MDC, input PHY_INTn, // open drain output PHY_RESETn, // SERDES output ser_enable, output ser_prbsen, output ser_loopen, output ser_rx_en, output ser_tx_clk, output [15:0] ser_t, output ser_tklsb, output ser_tkmsb, input ser_rx_clk, input [15:0] ser_r, input ser_rklsb, input ser_rkmsb, // CPLD interface output cpld_start, output cpld_mode, output cpld_done, input cpld_din, input cpld_clk, input cpld_detached, output cpld_misc, input cpld_init_b, input por, output config_success, // ADC input [13:0] adc_a, input adc_ovf_a, output adc_on_a, output adc_oe_a, input [13:0] adc_b, input adc_ovf_b, output adc_on_b, output adc_oe_b, // DAC output [15:0] dac_a, output [15:0] dac_b, // I2C input scl_pad_i, output scl_pad_o, output scl_pad_oen_o, input sda_pad_i, output sda_pad_o, output sda_pad_oen_o, // Clock Gen Control output [1:0] clk_en, output [1:0] clk_sel, input clk_func, // FIXME is an input to control the 9510 input clk_status, // Generic SPI output sclk, output mosi, input miso, output sen_clk, output sen_dac, output sen_tx_db, output sen_tx_adc, output sen_tx_dac, output sen_rx_db, output sen_rx_adc, output sen_rx_dac, // GPIO to DBoards inout [15:0] io_tx, inout [15:0] io_rx, // External RAM input [17:0] RAM_D_pi, output [17:0] RAM_D_po, output RAM_D_poe, output [18:0] RAM_A, output RAM_CE1n, output RAM_CENn, output RAM_WEn, output RAM_OEn, output RAM_LDn, // Debug stuff output uart_tx_o, input uart_rx_i, output uart_baud_o, input sim_mode, input [3:0] clock_divider ); localparam SR_MISC = 0; // 7 regs localparam SR_SIMTIMER = 8; // 2 localparam SR_TIME64 = 10; // 6 localparam SR_BUF_POOL = 16; // 4 localparam SR_RX_FRONT = 24; // 5 localparam SR_RX_CTRL0 = 32; // 9 localparam SR_RX_DSP0 = 48; // 7 localparam SR_RX_CTRL1 = 80; // 9 localparam SR_RX_DSP1 = 96; // 7 localparam SR_TX_FRONT = 128; // ? localparam SR_TX_CTRL = 144; // 6 localparam SR_TX_DSP = 160; // 5 localparam SR_UDP_SM = 192; // 64 // FIFO Sizes, 9 = 512 lines, 10 = 1024, 11 = 2048 // all (most?) are 36 bits wide, so 9 is 1 BRAM, 10 is 2, 11 is 4 BRAMs // localparam DSP_TX_FIFOSIZE = 9; unused -- DSPTX uses extram fifo localparam DSP_RX_FIFOSIZE = 10; localparam ETH_TX_FIFOSIZE = 9; localparam ETH_RX_FIFOSIZE = 11; localparam SERDES_TX_FIFOSIZE = 9; localparam SERDES_RX_FIFOSIZE = 9; // RX currently doesn't use a fifo? wire [7:0] set_addr, set_addr_dsp; wire [31:0] set_data, set_data_dsp; wire set_stb, set_stb_dsp; wire ram_loader_done, ram_loader_rst; wire wb_rst; wire dsp_rst = wb_rst; wire [31:0] status; wire bus_error, spi_int, i2c_int, pps_int, onetime_int, periodic_int, buffer_int; wire proc_int, overrun0, overrun1, underrun; wire uart_tx_int, uart_rx_int; wire [31:0] debug_gpio_0, debug_gpio_1; wire [31:0] debug_rx, debug_mac, debug_mac0, debug_mac1, debug_tx_dsp, debug_txc, debug_serdes0, debug_serdes1, debug_serdes2, debug_rx_dsp, debug_udp, debug_extfifo, debug_extfifo2; wire [15:0] ser_rx_occ, ser_tx_occ, dsp_rx_occ, dsp_tx_occ, eth_rx_occ, eth_tx_occ, eth_rx_occ2; wire ser_rx_full, ser_tx_full, dsp_rx_full, dsp_tx_full, eth_rx_full, eth_tx_full, eth_rx_full2; wire ser_rx_empty, ser_tx_empty, dsp_rx_empty, dsp_tx_empty, eth_rx_empty, eth_tx_empty, eth_rx_empty2; wire serdes_link_up, good_sync; wire epoch; wire [31:0] irq; wire [63:0] vita_time, vita_time_pps; wire run_rx0, run_rx1, run_tx; reg run_rx0_d1, run_rx1_d1; // /////////////////////////////////////////////////////////////////////////////////////////////// // Wishbone Single Master INTERCON localparam dw = 32; // Data bus width localparam aw = 16; // Address bus width, for byte addressibility, 16 = 64K byte memory space localparam sw = 4; // Select width -- 32-bit data bus with 8-bit granularity. wire [dw-1:0] m0_dat_o, m0_dat_i; wire [dw-1:0] s0_dat_o, s1_dat_o, s0_dat_i, s1_dat_i, s2_dat_o, s3_dat_o, s2_dat_i, s3_dat_i, s4_dat_o, s5_dat_o, s4_dat_i, s5_dat_i, s6_dat_o, s7_dat_o, s6_dat_i, s7_dat_i, s8_dat_o, s9_dat_o, s8_dat_i, s9_dat_i, sa_dat_o, sa_dat_i, sb_dat_i, sb_dat_o, sc_dat_i, sc_dat_o, sd_dat_i, sd_dat_o, se_dat_i, se_dat_o, sf_dat_i, sf_dat_o; wire [aw-1:0] m0_adr,s0_adr,s1_adr,s2_adr,s3_adr,s4_adr,s5_adr,s6_adr,s7_adr,s8_adr,s9_adr,sa_adr,sb_adr,sc_adr, sd_adr, se_adr, sf_adr; wire [sw-1:0] m0_sel,s0_sel,s1_sel,s2_sel,s3_sel,s4_sel,s5_sel,s6_sel,s7_sel,s8_sel,s9_sel,sa_sel,sb_sel,sc_sel, sd_sel, se_sel, sf_sel; wire m0_ack,s0_ack,s1_ack,s2_ack,s3_ack,s4_ack,s5_ack,s6_ack,s7_ack,s8_ack,s9_ack,sa_ack,sb_ack,sc_ack, sd_ack, se_ack, sf_ack; wire m0_stb,s0_stb,s1_stb,s2_stb,s3_stb,s4_stb,s5_stb,s6_stb,s7_stb,s8_stb,s9_stb,sa_stb,sb_stb,sc_stb, sd_stb, se_stb, sf_stb; wire m0_cyc,s0_cyc,s1_cyc,s2_cyc,s3_cyc,s4_cyc,s5_cyc,s6_cyc,s7_cyc,s8_cyc,s9_cyc,sa_cyc,sb_cyc,sc_cyc, sd_cyc, se_cyc, sf_cyc; wire m0_err, m0_rty; wire m0_we,s0_we,s1_we,s2_we,s3_we,s4_we,s5_we,s6_we,s7_we,s8_we,s9_we,sa_we,sb_we,sc_we,sd_we,se_we,sf_we; wb_1master #(.decode_w(8), .s0_addr(8'b0000_0000),.s0_mask(8'b1100_0000), // Main RAM (0-16K) .s1_addr(8'b0100_0000),.s1_mask(8'b1111_0000), // Packet Router (16-20K) .s2_addr(8'b0101_0000),.s2_mask(8'b1111_1100), // SPI .s3_addr(8'b0101_0100),.s3_mask(8'b1111_1100), // I2C .s4_addr(8'b0101_1000),.s4_mask(8'b1111_1100), // GPIO .s5_addr(8'b0101_1100),.s5_mask(8'b1111_1100), // Readback .s6_addr(8'b0110_0000),.s6_mask(8'b1111_0000), // Ethernet MAC .s7_addr(8'b0111_0000),.s7_mask(8'b1111_0000), // 20K-24K, Settings Bus (only uses 1K) .s8_addr(8'b1000_0000),.s8_mask(8'b1111_1100), // PIC .s9_addr(8'b1000_0100),.s9_mask(8'b1111_1100), // Unused .sa_addr(8'b1000_1000),.sa_mask(8'b1111_1100), // UART .sb_addr(8'b1000_1100),.sb_mask(8'b1111_1100), // ATR .sc_addr(8'b1001_0000),.sc_mask(8'b1111_0000), // Unused .sd_addr(8'b1010_0000),.sd_mask(8'b1111_0000), // SD Card access .se_addr(8'b1011_0000),.se_mask(8'b1111_0000), // Unused .sf_addr(8'b1100_0000),.sf_mask(8'b1100_0000), // Unused .dw(dw),.aw(aw),.sw(sw)) wb_1master (.clk_i(wb_clk),.rst_i(wb_rst), .m0_dat_o(m0_dat_o),.m0_ack_o(m0_ack),.m0_err_o(m0_err),.m0_rty_o(m0_rty),.m0_dat_i(m0_dat_i), .m0_adr_i(m0_adr),.m0_sel_i(m0_sel),.m0_we_i(m0_we),.m0_cyc_i(m0_cyc),.m0_stb_i(m0_stb), .s0_dat_o(s0_dat_o),.s0_adr_o(s0_adr),.s0_sel_o(s0_sel),.s0_we_o (s0_we),.s0_cyc_o(s0_cyc),.s0_stb_o(s0_stb), .s0_dat_i(s0_dat_i),.s0_ack_i(s0_ack),.s0_err_i(0),.s0_rty_i(0), .s1_dat_o(s1_dat_o),.s1_adr_o(s1_adr),.s1_sel_o(s1_sel),.s1_we_o (s1_we),.s1_cyc_o(s1_cyc),.s1_stb_o(s1_stb), .s1_dat_i(s1_dat_i),.s1_ack_i(s1_ack),.s1_err_i(0),.s1_rty_i(0), .s2_dat_o(s2_dat_o),.s2_adr_o(s2_adr),.s2_sel_o(s2_sel),.s2_we_o (s2_we),.s2_cyc_o(s2_cyc),.s2_stb_o(s2_stb), .s2_dat_i(s2_dat_i),.s2_ack_i(s2_ack),.s2_err_i(0),.s2_rty_i(0), .s3_dat_o(s3_dat_o),.s3_adr_o(s3_adr),.s3_sel_o(s3_sel),.s3_we_o (s3_we),.s3_cyc_o(s3_cyc),.s3_stb_o(s3_stb), .s3_dat_i(s3_dat_i),.s3_ack_i(s3_ack),.s3_err_i(0),.s3_rty_i(0), .s4_dat_o(s4_dat_o),.s4_adr_o(s4_adr),.s4_sel_o(s4_sel),.s4_we_o (s4_we),.s4_cyc_o(s4_cyc),.s4_stb_o(s4_stb), .s4_dat_i(s4_dat_i),.s4_ack_i(s4_ack),.s4_err_i(0),.s4_rty_i(0), .s5_dat_o(s5_dat_o),.s5_adr_o(s5_adr),.s5_sel_o(s5_sel),.s5_we_o (s5_we),.s5_cyc_o(s5_cyc),.s5_stb_o(s5_stb), .s5_dat_i(s5_dat_i),.s5_ack_i(s5_ack),.s5_err_i(0),.s5_rty_i(0), .s6_dat_o(s6_dat_o),.s6_adr_o(s6_adr),.s6_sel_o(s6_sel),.s6_we_o (s6_we),.s6_cyc_o(s6_cyc),.s6_stb_o(s6_stb), .s6_dat_i(s6_dat_i),.s6_ack_i(s6_ack),.s6_err_i(0),.s6_rty_i(0), .s7_dat_o(s7_dat_o),.s7_adr_o(s7_adr),.s7_sel_o(s7_sel),.s7_we_o (s7_we),.s7_cyc_o(s7_cyc),.s7_stb_o(s7_stb), .s7_dat_i(s7_dat_i),.s7_ack_i(s7_ack),.s7_err_i(0),.s7_rty_i(0), .s8_dat_o(s8_dat_o),.s8_adr_o(s8_adr),.s8_sel_o(s8_sel),.s8_we_o (s8_we),.s8_cyc_o(s8_cyc),.s8_stb_o(s8_stb), .s8_dat_i(s8_dat_i),.s8_ack_i(s8_ack),.s8_err_i(0),.s8_rty_i(0), .s9_dat_o(s9_dat_o),.s9_adr_o(s9_adr),.s9_sel_o(s9_sel),.s9_we_o (s9_we),.s9_cyc_o(s9_cyc),.s9_stb_o(s9_stb), .s9_dat_i(s9_dat_i),.s9_ack_i(s9_ack),.s9_err_i(0),.s9_rty_i(0), .sa_dat_o(sa_dat_o),.sa_adr_o(sa_adr),.sa_sel_o(sa_sel),.sa_we_o(sa_we),.sa_cyc_o(sa_cyc),.sa_stb_o(sa_stb), .sa_dat_i(sa_dat_i),.sa_ack_i(sa_ack),.sa_err_i(0),.sa_rty_i(0), .sb_dat_o(sb_dat_o),.sb_adr_o(sb_adr),.sb_sel_o(sb_sel),.sb_we_o(sb_we),.sb_cyc_o(sb_cyc),.sb_stb_o(sb_stb), .sb_dat_i(sb_dat_i),.sb_ack_i(sb_ack),.sb_err_i(0),.sb_rty_i(0), .sc_dat_o(sc_dat_o),.sc_adr_o(sc_adr),.sc_sel_o(sc_sel),.sc_we_o(sc_we),.sc_cyc_o(sc_cyc),.sc_stb_o(sc_stb), .sc_dat_i(sc_dat_i),.sc_ack_i(sc_ack),.sc_err_i(0),.sc_rty_i(0), .sd_dat_o(sd_dat_o),.sd_adr_o(sd_adr),.sd_sel_o(sd_sel),.sd_we_o(sd_we),.sd_cyc_o(sd_cyc),.sd_stb_o(sd_stb), .sd_dat_i(sd_dat_i),.sd_ack_i(sd_ack),.sd_err_i(0),.sd_rty_i(0), .se_dat_o(se_dat_o),.se_adr_o(se_adr),.se_sel_o(se_sel),.se_we_o(se_we),.se_cyc_o(se_cyc),.se_stb_o(se_stb), .se_dat_i(se_dat_i),.se_ack_i(se_ack),.se_err_i(0),.se_rty_i(0), .sf_dat_o(sf_dat_o),.sf_adr_o(sf_adr),.sf_sel_o(sf_sel),.sf_we_o(sf_we),.sf_cyc_o(sf_cyc),.sf_stb_o(sf_stb), .sf_dat_i(sf_dat_i),.sf_ack_i(sf_ack),.sf_err_i(0),.sf_rty_i(0)); // //////////////////////////////////////////////////////////////////////////////////////// // Reset Controller system_control sysctrl (.wb_clk_i(wb_clk), // .por_i(por), .ram_loader_rst_o(ram_loader_rst), .wb_rst_o(wb_rst), .ram_loader_done_i(ram_loader_done)); assign config_success = ram_loader_done; reg takeover = 0; wire cpld_start_int, cpld_mode_int, cpld_done_int; always @(posedge wb_clk) if(ram_loader_done) takeover = 1; assign cpld_misc = ~takeover; wire sd_clk, sd_csn, sd_mosi, sd_miso; assign sd_miso = cpld_din; assign cpld_start = takeover ? sd_clk : cpld_start_int; assign cpld_mode = takeover ? sd_csn : cpld_mode_int; assign cpld_done = takeover ? sd_mosi : cpld_done_int; // /////////////////////////////////////////////////////////////////// // RAM Loader wire [31:0] ram_loader_dat; wire [15:0] ram_loader_adr; wire [3:0] ram_loader_sel; wire ram_loader_stb, ram_loader_we; ram_loader #(.AWIDTH(aw),.RAM_SIZE(16384)) ram_loader (.wb_clk(wb_clk),.dsp_clk(dsp_clk),.ram_loader_rst(ram_loader_rst), .wb_dat(ram_loader_dat),.wb_adr(ram_loader_adr), .wb_stb(ram_loader_stb),.wb_sel(ram_loader_sel), .wb_we(ram_loader_we), .ram_loader_done(ram_loader_done), // CPLD Interface .cpld_clk(cpld_clk), .cpld_din(cpld_din), .cpld_start(cpld_start_int), .cpld_mode(cpld_mode_int), .cpld_done(cpld_done_int), .cpld_detached(cpld_detached)); // ///////////////////////////////////////////////////////////////////////// // Processor assign bus_error = m0_err | m0_rty; wire [63:0] zpu_status; zpu_wb_top #(.dat_w(dw), .adr_w(aw), .sel_w(sw)) zpu_top0 (.clk(wb_clk), .rst(wb_rst), .enb(ram_loader_done), // Data Wishbone bus to system bus fabric .we_o(m0_we),.stb_o(m0_stb),.dat_o(m0_dat_i),.adr_o(m0_adr), .dat_i(m0_dat_o),.ack_i(m0_ack),.sel_o(m0_sel),.cyc_o(m0_cyc), // Interrupts and exceptions .zpu_status(zpu_status), .interrupt(proc_int & 1'b0)); // ///////////////////////////////////////////////////////////////////////// // Dual Ported RAM -- D-Port is Slave #0 on main Wishbone // I-port connects directly to processor and ram loader ram_harvard #(.AWIDTH(14),.RAM_SIZE(16384),.ICWIDTH(7),.DCWIDTH(6)) sys_ram(.wb_clk_i(wb_clk),.wb_rst_i(wb_rst), .ram_loader_adr_i(ram_loader_adr[13:0]), .ram_loader_dat_i(ram_loader_dat), .ram_loader_stb_i(ram_loader_stb), .ram_loader_sel_i(ram_loader_sel), .ram_loader_we_i(ram_loader_we), .ram_loader_done_i(ram_loader_done), .if_adr(16'b0), .if_data(), .dwb_adr_i(s0_adr[13:0]), .dwb_dat_i(s0_dat_o), .dwb_dat_o(s0_dat_i), .dwb_we_i(s0_we), .dwb_ack_o(s0_ack), .dwb_stb_i(s0_stb), .dwb_sel_i(s0_sel)); // ///////////////////////////////////////////////////////////////////////// // Buffer Pool, slave #1 wire rd0_ready_i, rd0_ready_o; wire rd1_ready_i, rd1_ready_o; wire rd2_ready_i, rd2_ready_o; wire rd3_ready_i, rd3_ready_o; wire [35:0] rd0_dat, rd1_dat, rd2_dat, rd3_dat; wire wr0_ready_i, wr0_ready_o; wire wr1_ready_i, wr1_ready_o; wire wr2_ready_i, wr2_ready_o; wire wr3_ready_i, wr3_ready_o; wire [35:0] wr0_dat, wr1_dat, wr2_dat, wr3_dat; wire [35:0] tx_err_data; wire tx_err_src_rdy, tx_err_dst_rdy; wire [31:0] router_debug; packet_router #(.BUF_SIZE(9), .UDP_BASE(SR_UDP_SM), .CTRL_BASE(SR_BUF_POOL)) packet_router (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst), .wb_we_i(s1_we),.wb_stb_i(s1_stb),.wb_adr_i(s1_adr),.wb_dat_i(s1_dat_o), .wb_dat_o(s1_dat_i),.wb_ack_o(s1_ack),.wb_err_o(),.wb_rty_o(), .set_stb(set_stb_dsp), .set_addr(set_addr_dsp), .set_data(set_data_dsp), .stream_clk(dsp_clk), .stream_rst(dsp_rst), .stream_clr(1'b0), .status(status), .sys_int_o(buffer_int), .debug(router_debug), .ser_inp_data(wr0_dat), .ser_inp_valid(wr0_ready_i), .ser_inp_ready(wr0_ready_o), .dsp0_inp_data(wr1_dat), .dsp0_inp_valid(wr1_ready_i), .dsp0_inp_ready(wr1_ready_o), .dsp1_inp_data(wr3_dat), .dsp1_inp_valid(wr3_ready_i), .dsp1_inp_ready(wr3_ready_o), .eth_inp_data(wr2_dat), .eth_inp_valid(wr2_ready_i), .eth_inp_ready(wr2_ready_o), .err_inp_data(tx_err_data), .err_inp_ready(tx_err_dst_rdy), .err_inp_valid(tx_err_src_rdy), .ser_out_data(rd0_dat), .ser_out_valid(rd0_ready_o), .ser_out_ready(rd0_ready_i), .dsp_out_data(rd1_dat), .dsp_out_valid(rd1_ready_o), .dsp_out_ready(rd1_ready_i), .eth_out_data(rd2_dat), .eth_out_valid(rd2_ready_o), .eth_out_ready(rd2_ready_i) ); // ///////////////////////////////////////////////////////////////////////// // SPI -- Slave #2 spi_top shared_spi (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst),.wb_adr_i(s2_adr[4:0]),.wb_dat_i(s2_dat_o), .wb_dat_o(s2_dat_i),.wb_sel_i(s2_sel),.wb_we_i(s2_we),.wb_stb_i(s2_stb), .wb_cyc_i(s2_cyc),.wb_ack_o(s2_ack),.wb_err_o(),.wb_int_o(spi_int), .ss_pad_o({sen_tx_db,sen_tx_adc,sen_tx_dac,sen_rx_db,sen_rx_adc,sen_rx_dac,sen_dac,sen_clk}), .sclk_pad_o(sclk),.mosi_pad_o(mosi),.miso_pad_i(miso) ); // ///////////////////////////////////////////////////////////////////////// // I2C -- Slave #3 i2c_master_top #(.ARST_LVL(1)) i2c (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst),.arst_i(1'b0), .wb_adr_i(s3_adr[4:2]),.wb_dat_i(s3_dat_o[7:0]),.wb_dat_o(s3_dat_i[7:0]), .wb_we_i(s3_we),.wb_stb_i(s3_stb),.wb_cyc_i(s3_cyc), .wb_ack_o(s3_ack),.wb_inta_o(i2c_int), .scl_pad_i(scl_pad_i),.scl_pad_o(scl_pad_o),.scl_padoen_o(scl_pad_oen_o), .sda_pad_i(sda_pad_i),.sda_pad_o(sda_pad_o),.sda_padoen_o(sda_pad_oen_o) ); assign s3_dat_i[31:8] = 24'd0; // ///////////////////////////////////////////////////////////////////////// // GPIOs -- Slave #4 nsgpio nsgpio(.clk_i(wb_clk),.rst_i(wb_rst), .cyc_i(s4_cyc),.stb_i(s4_stb),.adr_i(s4_adr[4:0]),.we_i(s4_we), .dat_i(s4_dat_o),.dat_o(s4_dat_i),.ack_o(s4_ack), .rx(run_rx0_d1 | rx_rx1_d1), .tx(run_tx), .gpio({io_tx,io_rx}) ); // ///////////////////////////////////////////////////////////////////////// // Buffer Pool Status -- Slave #5 //compatibility number -> increment when the fpga has been sufficiently altered localparam compat_num = {16'd7, 16'd3}; //major, minor wb_readback_mux buff_pool_status (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s5_stb), .wb_adr_i(s5_adr), .wb_dat_o(s5_dat_i), .wb_ack_o(s5_ack), .word00(32'b0),.word01(32'b0),.word02(32'b0),.word03(32'b0), .word04(32'b0),.word05(32'b0),.word06(32'b0),.word07(32'b0), .word08(status),.word09(32'b0),.word10(vita_time[63:32]), .word11(vita_time[31:0]),.word12(compat_num),.word13(irq), .word14(vita_time_pps[63:32]),.word15(vita_time_pps[31:0]) ); // ///////////////////////////////////////////////////////////////////////// // Ethernet MAC Slave #6 simple_gemac_wrapper #(.RXFIFOSIZE(ETH_RX_FIFOSIZE), .TXFIFOSIZE(ETH_TX_FIFOSIZE)) simple_gemac_wrapper (.clk125(clk_to_mac), .reset(wb_rst), .GMII_GTX_CLK(GMII_GTX_CLK), .GMII_TX_EN(GMII_TX_EN), .GMII_TX_ER(GMII_TX_ER), .GMII_TXD(GMII_TXD), .GMII_RX_CLK(GMII_RX_CLK), .GMII_RX_DV(GMII_RX_DV), .GMII_RX_ER(GMII_RX_ER), .GMII_RXD(GMII_RXD), .sys_clk(dsp_clk), .rx_f36_data(wr2_dat), .rx_f36_src_rdy(wr2_ready_i), .rx_f36_dst_rdy(wr2_ready_o), .tx_f36_data(rd2_dat), .tx_f36_src_rdy(rd2_ready_o), .tx_f36_dst_rdy(rd2_ready_i), .wb_clk(wb_clk), .wb_rst(wb_rst), .wb_stb(s6_stb), .wb_cyc(s6_cyc), .wb_ack(s6_ack), .wb_we(s6_we), .wb_adr(s6_adr), .wb_dat_i(s6_dat_o), .wb_dat_o(s6_dat_i), .mdio(MDIO), .mdc(MDC), .debug(debug_mac)); // ///////////////////////////////////////////////////////////////////////// // Settings Bus -- Slave #7 settings_bus settings_bus (.wb_clk(wb_clk),.wb_rst(wb_rst),.wb_adr_i(s7_adr),.wb_dat_i(s7_dat_o), .wb_stb_i(s7_stb),.wb_we_i(s7_we),.wb_ack_o(s7_ack), .strobe(set_stb),.addr(set_addr),.data(set_data)); assign s7_dat_i = 32'd0; settings_bus_crossclock settings_bus_crossclock (.clk_i(wb_clk), .rst_i(wb_rst), .set_stb_i(set_stb), .set_addr_i(set_addr), .set_data_i(set_data), .clk_o(dsp_clk), .rst_o(dsp_rst), .set_stb_o(set_stb_dsp), .set_addr_o(set_addr_dsp), .set_data_o(set_data_dsp)); // Output control lines wire [7:0] clock_outs, serdes_outs, adc_outs; assign {clock_ready, clk_en[1:0], clk_sel[1:0]} = clock_outs[4:0]; assign {ser_enable, ser_prbsen, ser_loopen, ser_rx_en} = serdes_outs[3:0]; assign {adc_oe_a, adc_on_a, adc_oe_b, adc_on_b } = adc_outs[3:0]; wire phy_reset; assign PHY_RESETn = ~phy_reset; setting_reg #(.my_addr(SR_MISC+0),.width(8)) sr_clk (.clk(wb_clk),.rst(wb_rst),.strobe(s7_ack),.addr(set_addr), .in(set_data),.out(clock_outs),.changed()); setting_reg #(.my_addr(SR_MISC+1),.width(8)) sr_ser (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(serdes_outs),.changed()); setting_reg #(.my_addr(SR_MISC+2),.width(8)) sr_adc (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(adc_outs),.changed()); setting_reg #(.my_addr(SR_MISC+4),.width(1)) sr_phy (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(phy_reset),.changed()); // ///////////////////////////////////////////////////////////////////////// // LEDS // register 8 determines whether leds are controlled by SW or not // 1 = controlled by HW, 0 = by SW // In Rev3 there are only 6 leds, and the highest one is on the ETH connector wire [7:0] led_src, led_sw; wire [7:0] led_hw = {run_tx, (run_rx0_d1 | run_rx1_d1), clk_status, serdes_link_up & good_sync, 1'b0}; setting_reg #(.my_addr(SR_MISC+3),.width(8)) sr_led (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(led_sw),.changed()); setting_reg #(.my_addr(SR_MISC+6),.width(8), .at_reset(8'b0001_1110)) sr_led_src (.clk(wb_clk),.rst(wb_rst), .strobe(set_stb),.addr(set_addr), .in(set_data),.out(led_src),.changed()); assign leds = (led_src & led_hw) | (~led_src & led_sw); // ///////////////////////////////////////////////////////////////////////// // Interrupt Controller, Slave #8 // Pass interrupts on dsp_clk to wb_clk. These need edge triggering in the pic wire underrun_wb, overrun_wb, pps_wb; oneshot_2clk underrun_1s (.clk_in(dsp_clk), .in(underrun), .clk_out(wb_clk), .out(underrun_wb)); oneshot_2clk overrun_1s (.clk_in(dsp_clk), .in(overrun0 | overrun1), .clk_out(wb_clk), .out(overrun_wb)); oneshot_2clk pps_1s (.clk_in(dsp_clk), .in(pps_int), .clk_out(wb_clk), .out(pps_wb)); assign irq= {{8'b0}, {8'b0}, {2'b0, good_sync, periodic_int, clk_status, serdes_link_up, uart_tx_int, uart_rx_int}, {pps_wb,overrun_wb,underrun_wb,PHY_INTn,i2c_int,spi_int,onetime_int,buffer_int}}; pic pic(.clk_i(wb_clk),.rst_i(wb_rst),.cyc_i(s8_cyc),.stb_i(s8_stb),.adr_i(s8_adr[4:2]), .we_i(s8_we),.dat_i(s8_dat_o),.dat_o(s8_dat_i),.ack_o(s8_ack),.int_o(proc_int), .irq(irq) ); // ///////////////////////////////////////////////////////////////////////// // Master Timer, Slave #9 // No longer used, replaced with simple_timer below assign s9_ack = 0; // ///////////////////////////////////////////////////////////////////////// // Simple Timer interrupts /* simple_timer #(.BASE(SR_SIMTIMER)) simple_timer (.clk(wb_clk), .reset(wb_rst), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), .onetime_int(onetime_int), .periodic_int(periodic_int)); */ // ///////////////////////////////////////////////////////////////////////// // UART, Slave #10 simple_uart #(.TXDEPTH(3),.RXDEPTH(3)) uart // depth of 3 is 128 entries (.clk_i(wb_clk),.rst_i(wb_rst), .we_i(sa_we),.stb_i(sa_stb),.cyc_i(sa_cyc),.ack_o(sa_ack), .adr_i(sa_adr[4:2]),.dat_i(sa_dat_o),.dat_o(sa_dat_i), .rx_int_o(uart_rx_int),.tx_int_o(uart_tx_int), .tx_o(uart_tx_o),.rx_i(uart_rx_i),.baud_o(uart_baud_o)); // ///////////////////////////////////////////////////////////////////////// // ATR Controller, Slave #11 /* atr_controller atr_controller (.clk_i(wb_clk),.rst_i(wb_rst), .adr_i(sb_adr[5:0]),.sel_i(sb_sel),.dat_i(sb_dat_o),.dat_o(sb_dat_i), .we_i(sb_we),.stb_i(sb_stb),.cyc_i(sb_cyc),.ack_o(sb_ack), .run_rx(run_rx0_d1 | run_rx1_d1),.run_tx(run_tx),.ctrl_lines(atr_lines) ); */ // ////////////////////////////////////////////////////////////////////////// // Time Sync, Slave #12 // No longer used, see time_64bit. Still need to handle mimo time, though assign sc_ack = 0; // ///////////////////////////////////////////////////////////////////////// // SD Card Reader / Writer, Slave #13 /* sd_spi_wb sd_spi_wb (.clk(wb_clk),.rst(wb_rst), .sd_clk(sd_clk),.sd_csn(sd_csn),.sd_mosi(sd_mosi),.sd_miso(sd_miso), .wb_cyc_i(sd_cyc),.wb_stb_i(sd_stb),.wb_we_i(sd_we), .wb_adr_i(sd_adr[3:2]),.wb_dat_i(sd_dat_o[7:0]),.wb_dat_o(sd_dat_i[7:0]), .wb_ack_o(sd_ack) ); assign sd_dat_i[31:8] = 0; */ // ///////////////////////////////////////////////////////////////////////// // ADC Frontend wire [23:0] adc_i, adc_q; rx_frontend #(.BASE(SR_RX_FRONT)) rx_frontend (.clk(dsp_clk),.rst(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), .adc_a({adc_a,2'b00}),.adc_ovf_a(adc_ovf_a), .adc_b({adc_b,2'b00}),.adc_ovf_b(adc_ovf_b), .i_out(adc_i), .q_out(adc_q), .run(run_rx0_d1 | run_rx1_d1), .debug()); // ///////////////////////////////////////////////////////////////////////// // DSP RX 0 wire [31:0] sample_rx0; wire clear_rx0, strobe_rx0; always @(posedge dsp_clk) run_rx0_d1 <= run_rx0; dsp_core_rx #(.BASE(SR_RX_DSP0)) dsp_core_rx0 (.clk(dsp_clk),.rst(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), .adc_i(adc_i),.adc_ovf_i(adc_ovf_a),.adc_q(adc_q),.adc_ovf_q(adc_ovf_b), .sample(sample_rx0), .run(run_rx0_d1), .strobe(strobe_rx0), .debug() ); setting_reg #(.my_addr(SR_RX_CTRL0+3)) sr_clear_rx0 (.clk(dsp_clk),.rst(dsp_rst), .strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp), .out(),.changed(clear_rx0)); vita_rx_chain #(.BASE(SR_RX_CTRL0),.UNIT(0),.FIFOSIZE(DSP_RX_FIFOSIZE)) vita_rx_chain0 (.clk(dsp_clk), .reset(dsp_rst), .clear(clear_rx0), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), .vita_time(vita_time), .overrun(overrun0), .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), .rx_data_o(wr1_dat), .rx_src_rdy_o(wr1_ready_i), .rx_dst_rdy_i(wr1_ready_o), .debug() ); // ///////////////////////////////////////////////////////////////////////// // DSP RX 1 wire [31:0] sample_rx1; wire clear_rx1, strobe_rx1; always @(posedge dsp_clk) run_rx1_d1 <= run_rx1; dsp_core_rx #(.BASE(SR_RX_DSP1)) dsp_core_rx1 (.clk(dsp_clk),.rst(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), .adc_i(adc_i),.adc_ovf_i(adc_ovf_a),.adc_q(adc_q),.adc_ovf_q(adc_ovf_b), .sample(sample_rx1), .run(run_rx1_d1), .strobe(strobe_rx1), .debug() ); setting_reg #(.my_addr(SR_RX_CTRL1+3)) sr_clear_rx1 (.clk(dsp_clk),.rst(dsp_rst), .strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp), .out(),.changed(clear_rx1)); vita_rx_chain #(.BASE(SR_RX_CTRL1),.UNIT(2),.FIFOSIZE(DSP_RX_FIFOSIZE)) vita_rx_chain1 (.clk(dsp_clk), .reset(dsp_rst), .clear(clear_rx1), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), .vita_time(vita_time), .overrun(overrun1), .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), .rx_data_o(wr3_dat), .rx_src_rdy_o(wr3_ready_i), .rx_dst_rdy_i(wr3_ready_o), .debug() ); // /////////////////////////////////////////////////////////////////////////////////// // DSP TX wire [35:0] tx_data; wire tx_src_rdy, tx_dst_rdy; wire [31:0] debug_vt; wire clear_tx; setting_reg #(.my_addr(SR_TX_CTRL+1)) sr_clear_tx (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(),.changed(clear_tx)); ext_fifo #(.EXT_WIDTH(18),.INT_WIDTH(36),.RAM_DEPTH(19),.FIFO_DEPTH(19)) ext_fifo_i1 (.int_clk(dsp_clk), .ext_clk(clk_to_mac), .rst(dsp_rst | clear_tx), .RAM_D_pi(RAM_D_pi), .RAM_D_po(RAM_D_po), .RAM_D_poe(RAM_D_poe), .RAM_A(RAM_A), .RAM_WEn(RAM_WEn), .RAM_CENn(RAM_CENn), .RAM_LDn(RAM_LDn), .RAM_OEn(RAM_OEn), .RAM_CE1n(RAM_CE1n), .datain(rd1_dat), .src_rdy_i(rd1_ready_o), .dst_rdy_o(rd1_ready_i), .dataout(tx_data), .src_rdy_o(tx_src_rdy), .dst_rdy_i(tx_dst_rdy), .debug(debug_extfifo), .debug2(debug_extfifo2) ); wire [23:0] tx_i, tx_q; vita_tx_chain #(.BASE_CTRL(SR_TX_CTRL), .BASE_DSP(SR_TX_DSP), .REPORT_ERROR(1), .DO_FLOW_CONTROL(1), .PROT_ENG_FLAGS(1), .USE_TRANS_HEADER(1), .DSP_NUMBER(0)) vita_tx_chain (.clk(dsp_clk), .reset(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), .vita_time(vita_time), .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy), .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy), .tx_i(tx_i),.tx_q(tx_q), .underrun(underrun), .run(run_tx), .debug(debug_vt)); tx_frontend #(.BASE(SR_TX_FRONT)) tx_frontend (.clk(dsp_clk), .rst(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), .tx_i(tx_i), .tx_q(tx_q), .run(1'b1), .dac_a(dac_a), .dac_b(dac_b)); // /////////////////////////////////////////////////////////////////////////////////// // SERDES serdes #(.TXFIFOSIZE(SERDES_TX_FIFOSIZE),.RXFIFOSIZE(SERDES_RX_FIFOSIZE)) serdes (.clk(dsp_clk),.rst(dsp_rst), .ser_tx_clk(ser_tx_clk),.ser_t(ser_t),.ser_tklsb(ser_tklsb),.ser_tkmsb(ser_tkmsb), .rd_dat_i(rd0_dat[31:0]),.rd_flags_i(rd0_dat[35:32]),.rd_ready_o(rd0_ready_i),.rd_ready_i(rd0_ready_o), .ser_rx_clk(ser_rx_clk),.ser_r(ser_r),.ser_rklsb(ser_rklsb),.ser_rkmsb(ser_rkmsb), .wr_dat_o(wr0_dat[31:0]),.wr_flags_o(wr0_dat[35:32]),.wr_ready_o(wr0_ready_i),.wr_ready_i(wr0_ready_o), .tx_occupied(ser_tx_occ),.tx_full(ser_tx_full),.tx_empty(ser_tx_empty), .rx_occupied(ser_rx_occ),.rx_full(ser_rx_full),.rx_empty(ser_rx_empty), .serdes_link_up(serdes_link_up),.debug0(debug_serdes0), .debug1(debug_serdes1) ); assign RAM_CLK = clk_to_mac; // ///////////////////////////////////////////////////////////////////////// // VITA Timing wire [31:0] debug_sync; time_64bit #(.TICKS_PER_SEC(32'd100000000),.BASE(SR_TIME64)) time_64bit (.clk(dsp_clk), .rst(dsp_rst), .set_stb(set_stb_dsp), .set_addr(set_addr_dsp), .set_data(set_data_dsp), .pps(pps_in), .vita_time(vita_time), .vita_time_pps(vita_time_pps), .pps_int(pps_int), .exp_time_in(exp_time_in), .exp_time_out(exp_time_out), .good_sync(good_sync), .debug(debug_sync)); // ///////////////////////////////////////////////////////////////////////////////////////// // Debug Pins assign debug_clk = 2'b00; // {dsp_clk, clk_to_mac}; assign debug = 32'd0; assign debug_gpio_0 = 32'd0; assign debug_gpio_1 = 32'd0; endmodule // u2_core