//
// Copyright 2011-2012 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.
//

`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////

module B100
  (input CLK_FPGA_P, input CLK_FPGA_N,  // Diff
   output [2:0] debug_led, output [31:0] debug, output [1:0] debug_clk,

   // GPIF
   inout [15:0] GPIF_D, input [3:0] GPIF_CTL, output GPIF_SLOE, 
   output [1:0] GPIF_ADR, output GPIF_SLWR, output GPIF_SLRD, output GPIF_PKTEND,
   input IFCLK,
   
   inout SDA_FPGA, inout SCL_FPGA, // I2C

   output SCLK_TX_DB, output SEN_TX_DB, output MOSI_TX_DB, input MISO_TX_DB,   // DB TX SPI
   output SCLK_RX_DB, output SEN_RX_DB, output MOSI_RX_DB, input MISO_RX_DB,   // DB TX SPI
   output SCLK_CODEC, output SEN_CODEC, output MOSI_CODEC, input MISO_CODEC,   // AD9862 main SPI

   input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel,
   
   inout [15:0] io_tx, inout [15:0] io_rx,

   output [13:0] dac, output TXSYNC, output TXBLANK,
   input [11:0] adc, input RXSYNC,
  
   input PPS_IN,
   input reset_n, output reset_codec,
   input ext_reset
   );

   assign reset_codec = 1;  // Believed to be active low
   
   // /////////////////////////////////////////////////////////////////////////
   // Clocking
   wire  clk_fpga, clk_fpga_in, reset;
   wire gpif_clk = IFCLK;
   wire gpif_rst;
   
   IBUFGDS #(.IOSTANDARD("LVDS_33"), .DIFF_TERM("TRUE")) 
   clk_fpga_pin (.O(clk_fpga_in),.I(CLK_FPGA_P),.IB(CLK_FPGA_N));

   BUFG clk_fpga_BUFG (.I(clk_fpga_in), .O(clk_fpga));
   
   reset_sync reset_sync(.clk(clk_fpga), .reset_in((~reset_n) | (~ext_reset)), .reset_out(reset));
   reset_sync reset_sync_gpif(.clk(gpif_clk), .reset_in((~reset_n) | (~ext_reset)), .reset_out(gpif_rst));
   
   // /////////////////////////////////////////////////////////////////////////
   // SPI
   wire  mosi, sclk, miso;
   assign { SCLK_TX_DB, MOSI_TX_DB } = ~SEN_TX_DB ? {sclk,mosi} : 2'b0;
   assign { SCLK_RX_DB, MOSI_RX_DB } = ~SEN_RX_DB ? {sclk,mosi} : 2'b0;
   assign { SCLK_CODEC, MOSI_CODEC } = ~SEN_CODEC ? {sclk,mosi} : 2'b0;
   assign miso = (~SEN_TX_DB & MISO_TX_DB) | (~SEN_RX_DB & MISO_RX_DB) |
		 (~SEN_CODEC & MISO_CODEC);

   // /////////////////////////////////////////////////////////////////////////
   // TX DAC -- handle the interleaved data bus to DAC, with clock doubling DLL

   assign TXBLANK = 0;
   wire [13:0] tx_i, tx_q;

   genvar i;
   generate
      for(i=0;i<14;i=i+1)
	begin : gen_dacout
	   ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" 
		   .INIT(1'b0),            // Sets initial state of the Q output to 1'b0 or 1'b1
		   .SRTYPE("SYNC"))        // Specifies "SYNC" or "ASYNC" set/reset
	   ODDR2_inst (.Q(dac[i]),      // 1-bit DDR output data
		       .C0(clk_fpga),  // 1-bit clock input
		       .C1(~clk_fpga), // 1-bit clock input
		       .CE(1'b1),      // 1-bit clock enable input
		       .D0(tx_i[i]),   // 1-bit data input (associated with C0)
		       .D1(tx_q[i]),   // 1-bit data input (associated with C1)
		       .R(1'b0),       // 1-bit reset input
		       .S(1'b0));      // 1-bit set input
	end // block: gen_dacout
      endgenerate
   ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" 
	   .INIT(1'b0),            // Sets initial state of the Q output to 1'b0 or 1'b1
	   .SRTYPE("SYNC"))        // Specifies "SYNC" or "ASYNC" set/reset
   ODDR2_txsnc (.Q(TXSYNC),      // 1-bit DDR output data
		.C0(clk_fpga),  // 1-bit clock input
		.C1(~clk_fpga), // 1-bit clock input
		.CE(1'b1),      // 1-bit clock enable input
		.D0(1'b0),   // 1-bit data input (associated with C0)
		.D1(1'b1),   // 1-bit data input (associated with C1)
		.R(1'b0),       // 1-bit reset input
		.S(1'b0));      // 1-bit set input

   // /////////////////////////////////////////////////////////////////////////
   // RX ADC -- handles deinterleaving

   wire rxsync_0, rxsync_1;
   reg [11:0] rx_i, rx_q;
   wire [11:0] rx_a, rx_b;
   
   genvar      j;
   generate
      for(j=0;j<12;j=j+1)
	begin : gen_adcin
	   IDDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1"
		   .INIT_Q0(1'b0),         // Sets initial state of the Q0 output to 1’b0 or 1’b1
		   .INIT_Q1(1'b0),         // Sets initial state of the Q1 output to 1’b0 or 1’b1
		   .SRTYPE("SYNC"))        // Specifies "SYNC" or "ASYNC" set/reset
	   IDDR2_inst (.Q0(rx_a[j]),      // 1-bit output captured with C0 clock
		       .Q1(rx_b[j]),      // 1-bit output captured with C1 clock
		       .C0(clk_fpga),     // 1-bit clock input
		       .C1(~clk_fpga),    // 1-bit clock input
		       .CE(1'b1),         // 1-bit clock enable input
		       .D(adc[j]),        // 1-bit DDR data input
		       .R(1'b0),          // 1-bit reset input
		       .S(1'b0));         // 1-bit set input
	end // block: gen_adcin
   endgenerate
   
   IDDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1"
	   .INIT_Q0(1'b0),         // Sets initial state of the Q0 output to 1’b0 or 1’b1
	   .INIT_Q1(1'b0),         // Sets initial state of the Q1 output to 1’b0 or 1’b1
	   .SRTYPE("SYNC"))        // Specifies "SYNC" or "ASYNC" set/reset
   IDDR2_sync (.Q0(rxsync_0),      // 1-bit output captured with C0 clock
	       .Q1(rxsync_1),      // 1-bit output captured with C1 clock
	       .C0(clk_fpga),     // 1-bit clock input
	       .C1(~clk_fpga),    // 1-bit clock input
	       .CE(1'b1),         // 1-bit clock enable input
	       .D(RXSYNC),        // 1-bit DDR data input
	       .R(1'b0),          // 1-bit reset input
	       .S(1'b0));         // 1-bit set input

   always @(posedge clk_fpga)
     if(rxsync_0)
       begin
	  rx_i <= ~rx_b;
	  rx_q <= ~rx_a;
       end
     else
       begin
	  rx_i <= ~rx_a;
	  rx_q <= ~rx_b;
       end

   // /////////////////////////////////////////////////////////////////////////
   // Main Core
   wire [35:0] rx_data, tx_data, ctrl_data, resp_data;
   wire rx_src_rdy, rx_dst_rdy, tx_src_rdy, tx_dst_rdy, resp_src_rdy, resp_dst_rdy, ctrl_src_rdy, ctrl_dst_rdy;
   wire dsp_rx_run, dsp_tx_run;
   wire [7:0] sen8;
   assign {SEN_CODEC,SEN_TX_DB,SEN_RX_DB} = sen8[2:0];
    wire [31:0] core_debug;

   assign debug_led = {dsp_tx_run, dsp_rx_run, cgen_st_ld};
   wire cgen_sync;
   assign { cgen_sync_b, cgen_ref_sel } = {~cgen_sync, 1'b1};

   u1plus_core #(
`ifdef NUM_RX_DSP
        .NUM_RX_DSPS(`NUM_RX_DSP),
`else
        .NUM_RX_DSPS(1),
`endif
        .DSP_RX_XTRA_FIFOSIZE(11),
        .DSP_TX_XTRA_FIFOSIZE(12),
        .USE_PACKET_PADDER(1)
    ) core(
         .clk(clk_fpga), .reset(reset),
         .debug(core_debug), .debug_clk(debug_clk),

         .rx_data(rx_data), .rx_src_rdy(rx_src_rdy), .rx_dst_rdy(rx_dst_rdy),
         .tx_data(tx_data), .tx_src_rdy(tx_src_rdy), .tx_dst_rdy(tx_dst_rdy),
         .ctrl_data(ctrl_data), .ctrl_src_rdy(ctrl_src_rdy), .ctrl_dst_rdy(ctrl_dst_rdy),
         .resp_data(resp_data), .resp_src_rdy(resp_src_rdy), .resp_dst_rdy(resp_dst_rdy),

         .dsp_rx_run(dsp_rx_run), .dsp_tx_run(dsp_tx_run),
         .clock_sync(cgen_sync),

         .db_sda(SDA_FPGA), .db_scl(SCL_FPGA),
         .sclk(sclk), .sen(sen8), .mosi(mosi), .miso(miso),
         .io_tx(io_tx), .io_rx(io_rx),
         .tx_i(tx_i), .tx_q(tx_q),
         .rx_i(rx_i), .rx_q(rx_q),
         .pps_in(PPS_IN) );

    // /////////////////////////////////////////////////////////////////////////
    // Interface from host to/from GPIF
    wire [31:0] gpif_debug;
    slave_fifo slave_fifo (.gpif_clk(gpif_clk), .gpif_rst(gpif_rst), .gpif_d(GPIF_D),
         .gpif_ctl(GPIF_CTL), .sloe(GPIF_SLOE), .slwr(GPIF_SLWR), .slrd(GPIF_SLRD),
         .pktend(GPIF_PKTEND), .fifoadr(GPIF_ADR),

         .fifo_clk(clk_fpga), .fifo_rst(reset),
         .rx_data(rx_data), .rx_src_rdy(rx_src_rdy), .rx_dst_rdy(rx_dst_rdy),
         .tx_data(tx_data), .tx_src_rdy(tx_src_rdy), .tx_dst_rdy(tx_dst_rdy),
         .ctrl_data(ctrl_data), .ctrl_src_rdy(ctrl_src_rdy), .ctrl_dst_rdy(ctrl_dst_rdy),
         .resp_data(resp_data), .resp_src_rdy(resp_src_rdy), .resp_dst_rdy(resp_dst_rdy),

         .debug(gpif_debug));

    //assign debug = gpif_debug;
    assign debug = core_debug;

endmodule // B100