// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/unisims/IOBUF.v,v 1.9 2007/05/23 21:43:39 patrickp Exp $
///////////////////////////////////////////////////////////////////////////////
// Copyright (c) 1995/2004 Xilinx, Inc.
// All Right Reserved.
///////////////////////////////////////////////////////////////////////////////
//   ____  ____
//  /   /\/   /
// /___/  \  /    Vendor : Xilinx
// \   \   \/     Version : 10.1
//  \   \         Description : Xilinx Functional Simulation Library Component
//  /   /                  Bi-Directional Buffer
// /___/   /\     Filename : IOBUF.v
// \   \  /  \    Timestamp : Thu Mar 25 16:42:37 PST 2004
//  \___\/\___\
//
// Revision:
//    03/23/04 - Initial version.
//    02/22/06 - CR#226003 - Added integer, real parameter type
//    05/23/07 - Changed timescale to 1 ps / 1 ps.
//    05/23/07 - Added wire declaration for internal signals.

`timescale  1 ps / 1 ps


module IOBUF (O, IO, I, T);

    parameter CAPACITANCE = "DONT_CARE";
    parameter integer DRIVE = 12;
    parameter IBUF_DELAY_VALUE = "0";
    parameter IFD_DELAY_VALUE = "AUTO";
    parameter IOSTANDARD = "DEFAULT";
    parameter SLEW = "SLOW";

    output O;
    inout  IO;
    input  I, T;

    wire ts;

    //tri0 GTS = glbl.GTS;

    or O1 (ts, GTS, T);
    bufif0 T1 (IO, I, ts);

    buf B1 (O, IO);

    initial begin
	
        case (CAPACITANCE)

            "LOW", "NORMAL", "DONT_CARE" : ;
            default : begin
                          $display("Attribute Syntax Error : The attribute CAPACITANCE on IOBUF instance %m is set to %s.  Legal values for this attribute are DONT_CARE, LOW or NORMAL.", CAPACITANCE);
                          $finish;
                      end

        endcase

	case (IBUF_DELAY_VALUE)

            "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", "13", "14", "15", "16" : ;
            default : begin
                          $display("Attribute Syntax Error : The attribute IBUF_DELAY_VALUE on IOBUF instance %m is set to %s.  Legal values for this attribute are 0, 1, 2, ... or 16.", IBUF_DELAY_VALUE);
                          $finish;
                      end

        endcase


	case (IFD_DELAY_VALUE)

            "AUTO", "0", "1", "2", "3", "4", "5", "6", "7", "8" : ;
            default : begin
                          $display("Attribute Syntax Error : The attribute IFD_DELAY_VALUE on IOBUF instance %m is set to %s.  Legal values for this attribute are AUTO, 0, 1, 2, ... or 8.", IFD_DELAY_VALUE);
                          $finish;
                      end

	endcase
	
    end // initial begin
    
endmodule