// Modified from code originally by Richard Herveille, his copyright is below ///////////////////////////////////////////////////////////////////// //// //// //// OpenCores Simple General Purpose IO core //// //// //// //// Author: Richard Herveille //// //// richard@asics.ws //// //// www.asics.ws //// //// //// ///////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2002 Richard Herveille //// //// richard@asics.ws //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer.//// //// //// //// THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY //// //// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED //// //// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS //// //// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR //// //// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, //// //// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES //// //// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE //// //// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR //// //// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF //// //// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT //// //// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT //// //// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE //// //// POSSIBILITY OF SUCH DAMAGE. //// //// //// ///////////////////////////////////////////////////////////////////// module nsgpio16LE (input clk_i, input rst_i, input cyc_i, input stb_i, input [3:0] adr_i, input we_i, input [15:0] dat_i, output reg [15:0] dat_o, output reg ack_o, input [31:0] atr, input [31:0] debug_0, input [31:0] debug_1, inout [31:0] gpio ); reg [63:0] ctrl; reg [31:0] line; reg [31:0] lgpio; // LatchedGPIO pins reg [31:0] ddr; wire wb_acc = cyc_i & stb_i; // WISHBONE access wire wb_wr = wb_acc & we_i; // WISHBONE write access always @(posedge clk_i or posedge rst_i) if (rst_i) begin ctrl <= 64'h0; line <= 0; end else if (wb_wr) case( adr_i[3:1] ) 3'b000 : line[15:0] <= dat_i; 3'b001 : line[31:16] <= dat_i; 3'b010 : ddr[15:0] <= dat_i; 3'b011 : ddr[31:16] <= dat_i; 3'b100 : ctrl[15:0] <= dat_i; 3'b101 : ctrl[31:16] <= dat_i; 3'b110 : ctrl[47:32] <= dat_i; 3'b111 : ctrl[63:48] <= dat_i; endcase // case ( adr_i[3:1] ) always @(posedge clk_i) case (adr_i[3:1]) 3'b000 : dat_o <= lgpio[15:0]; 3'b001 : dat_o <= lgpio[31:16]; 3'b010 : dat_o <= ddr[15:0]; 3'b011 : dat_o <= ddr[31:16]; 3'b100 : dat_o <= ctrl[15:0]; 3'b101 : dat_o <= ctrl[31:16]; 3'b110 : dat_o <= ctrl[47:32]; 3'b111 : dat_o <= ctrl[63:48]; endcase // case (adr_i[3:1]) always @(posedge clk_i or posedge rst_i) if (rst_i) ack_o <= 1'b0; else ack_o <= wb_acc & !ack_o; // latch GPIO input pins always @(posedge clk_i) lgpio <= gpio; // assign GPIO outputs integer n; reg [31:0] igpio; // temporary internal signal always @(ctrl or line or debug_1 or debug_0 or atr) for(n=0;n<32;n=n+1) igpio[n] <= ddr[n] ? (ctrl[2*n+1] ? (ctrl[2*n] ? debug_1[n] : debug_0[n]) : (ctrl[2*n] ? atr[n] : line[n]) ) : 1'bz; assign gpio = igpio; endmodule