module simple_gemac
  (input clk125, input reset,
   // GMII
   output GMII_GTX_CLK, output GMII_TX_EN, output GMII_TX_ER, output [7:0] GMII_TXD,
   input GMII_RX_CLK, input GMII_RX_DV, input GMII_RX_ER, input [7:0] GMII_RXD,

   // Flow Control Interface
   input pause_req, input [15:0] pause_time,

   // RX Client Interface
   output rx_clk, output [7:0] rx_data, output rx_valid, output rx_error, output rx_ack,

   // TX Client Interface
   output tx_clk, input [7:0] tx_data, input tx_valid, input tx_error, output tx_ack
   );

   localparam SGE_IFG 		     = 8'd12;  // 12 should be the absolute minimum
   localparam SGE_RESPECT_FLOW_CTRL  = 1'b1;  // stop sending if other side requests

   wire rst_rxclk, rst_txclk;   
   oneshot_2clk tx_rst_1shot (.clk_in(tx_clk),.in(reset),.clk_out(tx_clk),.out(rst_txclk));  // FIXME clocks
   oneshot_2clk rx_rst_1shot (.clk_in(rx_clk),.in(reset),.clk_out(rx_clk),.out(rst_rxclk));

   wire [15:0] pause_quanta_rcvd;

   wire [47:0] ucast_addr = 48'hF1F2_F3F4_F5F6;
   wire [47:0] mcast_addr = 0;
   wire pass_ucast  =1, pass_mcast=0, pass_bcast=1, pass_pause=0, pass_all=0;
   
   simple_gemac_tx simple_gemac_tx
     (.clk125(clk125),.reset(rst_txclk),
      .GMII_GTX_CLK(GMII_GTX_CLK), .GMII_TX_EN(GMII_TX_EN),
      .GMII_TX_ER(GMII_TX_ER), .GMII_TXD(GMII_TXD),
      .tx_clk(tx_clk), .tx_data(tx_data), .tx_valid(tx_valid), .tx_error(tx_error), .tx_ack(tx_ack),
      .ifg(SGE_IFG), .mac_addr(ucast_addr),
      .pause_req(pause_req), .pause_time(pause_time),  // We request flow control
      .pause_apply(pause_apply), .paused(paused)  // We respect flow control
      );

   simple_gemac_rx simple_gemac_rx
     (.reset(rst_rxclk),
      .GMII_RX_CLK(GMII_RX_CLK), .GMII_RX_DV(GMII_RX_DV), 
      .GMII_RX_ER(GMII_RX_ER), .GMII_RXD(GMII_RXD),
      .rx_clk(rx_clk), .rx_data(rx_data), .rx_valid(rx_valid), .rx_error(rx_error), .rx_ack(rx_ack),
      .ucast_addr(ucast_addr), .mcast_addr(mcast_addr),
      .pass_ucast(pass_ucast), .pass_mcast(pass_mcast), .pass_bcast(pass_bcast), 
      .pass_pause(pass_pause), .pass_all(pass_all),
      .pause_quanta_rcvd(pause_quanta_rcvd), .pause_rcvd(pause_rcvd) 
      );

   flow_ctrl_tx flow_ctrl_tx
     (.rst(rst_txclk), .tx_clk(tx_clk),
      .tx_pause_en(SGE_RESPECT_FLOW_CTRL),
      .pause_quanta(pause_quanta_rcvd), // 16 bit value
      .pause_quanta_val(pause_rcvd),
      .pause_apply(pause_apply),
      .paused(paused)
      );

endmodule // simple_gemac