task SendFlowCtrl; input [15:0] fc_len; begin $display("Sending Flow Control, quanta = %d, time = %d", fc_len,$time); pause_time <= fc_len; @(posedge clk); pause_req <= 1; @(posedge clk); pause_req <= 0; $display("Sent Flow Control"); end endtask // SendFlowCtrl task SendPacket2MAC; input tx_clk; input [7:0] data_start; input [31:0] data_len; output [7:0] tx_data; output tx_valid; output tx_error; input tx_ack; reg [15:0] count; begin $display("Sending Packet Len=%d, %d", data_len, $time); count <= 1; tx_data <= data_start; tx_error <= 0; tx_valid <= 1; while(~tx_ack) @(posedge tx_clk); $display("Packet Accepted, %d", $time); while(count < data_len) begin tx_data <= tx_data + 1; count <= count + 1; @(posedge clk); end tx_valid <= 0; @(posedge tx_clk); end endtask // SendPacket2MAC task SendPacket_to_ll8; input [7:0] data_start; input [15:0] data_len; // output [7:0] tx_data; // output tx_sof; // output tx_eof; // output tx_src_rdy; // input tx_dst_rdy; reg [15:0] count; begin $display("Sending Packet Len=%d, %d", data_len, $time); count <= 2; tx_ll_data2 <= data_start; tx_ll_src_rdy2 <= 1; tx_ll_sof2 <= 1; tx_ll_eof2 <= 0; #1; while(count < data_len) begin while(~tx_ll_dst_rdy2) @(posedge clk); @(posedge clk); tx_ll_data2 = tx_ll_data2 + 1; count = count + 1; tx_ll_sof2 <= 0; end tx_ll_eof2 <= 1; while(~tx_ll_dst_rdy2) @(posedge clk); @(posedge clk); tx_ll_src_rdy2 <= 0; end endtask // SendPacket_to_ll8 task SendPacketFromFile; input clk; input [31:0] data_len; output [7:0] tx_data; output tx_valid; output tx_error; input tx_ack; reg [15:0] count; begin $display("Sending Packet From File Len=%d, %d",data_len,$time); $readmemh("test_packet.mem",pkt_rom ); count = 0; tx_data = pkt_rom[count]; tx_error = 0; tx_valid = 1; while(~tx_ack) @(posedge clk); $display("Packet Accepted, %d",$time); count = 1; while(count < data_len) begin tx_data = pkt_rom[count]; count = count + 1; @(posedge clk); end tx_valid <= 0; @(posedge clk); end endtask // SendPacketFromFile task SendPacketFromFile_ll8; input [31:0] data_len; integer count; begin $display("Sending Packet From File to LL8 Len=%d, %d",data_len,$time); $readmemh("test_packet.mem",pkt_rom ); while(~tx_ll_dst_rdy2) @(posedge clk); tx_ll_data2 <= pkt_rom[0]; tx_ll_src_rdy2 <= 1; tx_ll_sof2 <= 1; tx_ll_eof2 <= 0; @(posedge clk); for(i=1;i