// -*- verilog -*- // // USRP - Universal Software Radio Peripheral // // Copyright (C) 2003 Matt Ettus // // This program is free software; you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by // the Free Software Foundation; either version 2 of the License, or // (at your option) any later version. // // This program is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. // // You should have received a copy of the GNU General Public License // along with this program; if not, write to the Free Software // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA // module cic_interp(clock,reset,enable,rate,strobe_in,strobe_out,signal_in,signal_out); parameter bw = 16; parameter N = 4; parameter log2_of_max_rate = 7; parameter maxbitgain = (N-1)*log2_of_max_rate; input clock; input reset; input enable; input [7:0] rate; input strobe_in,strobe_out; input [bw-1:0] signal_in; wire [bw-1:0] signal_in; output [bw-1:0] signal_out; wire [bw-1:0] signal_out; wire [bw+maxbitgain-1:0] signal_in_ext; reg [bw+maxbitgain-1:0] integrator [0:N-1]; reg [bw+maxbitgain-1:0] differentiator [0:N-1]; reg [bw+maxbitgain-1:0] pipeline [0:N-1]; integer i; sign_extend #(bw,bw+maxbitgain) ext_input (.in(signal_in),.out(signal_in_ext)); //FIXME Note that this section has pipe and diff reversed // It still works, but is confusing always @(posedge clock) if(reset) for(i=0;i