#!/usr/bin/env python3 # # Copyright 2017-2018 Ettus Research, National Instruments Company # # SPDX-License-Identifier: GPL-3.0-or-later # """ N3XX Built-In Self Test (BIST) Will work on all derivatives of the N3xx series. """ from __future__ import print_function import sys import time from usrp_mpm import bist # Timeout values are in seconds: GPS_WARMUP_TIMEOUT = 70 # Data sheet says "about a minute" GPS_LOCKOK_TIMEOUT = 2 # Data sheet says about 15 minutes. Because our test # does not necessarily require GPS lock to pass, we # reduce this value in order for the BIST to pass faster # by default. ############################################################################## # Bist class ############################################################################## class N3XXBIST(bist.UsrpBIST): """ BIST Tool for the USRP N3xx series """ usrp_type = "N3XX" # This defines special tests that are really collections of other tests. collections = { 'standard': ["ddr3", "gpsdo", "rtc", "temp", "fan", "tpm"], 'extended': "*", } # Default FPGA image type DEFAULT_FPGA_TYPE = 'HG' lv_compat_format = { 'ddr3': { 'throughput': -1, }, 'gpsdo': { "class": "", "time": "", "ept": -1, "lat": -1, "lon": -1, "alt": -1, "epx": -1, "epy": -1, "epv": -1, "track": -1, "speed": -1, "climb": -1, "eps": -1, "mode": -1, }, 'tpm': { 'tpm0_caps': "", }, 'sfp0_loopback': { 'elapsed_time': -1, 'max_roundtrip_latency': -1, 'throughput': -1, 'max_ber': -1, 'errors': -1, 'bits': -1, }, 'sfp1_loopback': { 'elapsed_time': -1, 'max_roundtrip_latency': -1, 'throughput': -1, 'max_ber': -1, 'errors': -1, 'bits': -1, }, 'qsfp_loopback': { 'elapsed_time': -1, 'max_roundtrip_latency': -1, 'throughput': -1, 'max_ber': -1, 'errors': -1, 'bits': -1, }, 'gpio': { 'write_patterns': [], 'read_patterns': [], }, 'temp': { 'fpga-thermal-zone': -1, }, 'fan': { 'cooling_device0': -1, 'cooling_device1': -1, }, 'whiterabbit': { 'lock_status': 0, }, } device_args = "type=n3xx,addr=127.0.0.1" def __init__(self): bist.UsrpBIST.__init__(self) def get_mb_periph_mgr(self): """Return reference to an n3xx periph manager""" from usrp_mpm.periph_manager.n3xx import n3xx return n3xx def get_product_id(self): """Return the mboard product ID (n310 or n300):""" return bist.get_product_id_from_eeprom(valid_ids=['n300', 'n310', 'n320']) ############################################################################# # BISTS # All bist_* methods must return True/False success values! ############################################################################# def bist_ddr3(self): """ BIST for PL DDR3 DRAM Description: Calls a test to examine the speed of the DDR3. To be precise, it fires up a UHD session, which runs a DDR3 BiST internally. If that works, it'll return estimated throughput that was gathered during the DDR3 BiST. External Equipment: None Return dictionary: - throughput: The estimated throughput in bytes/s Return status: True if the DDR3 bist passed """ assert 'ddr3' in self.tests_to_run if self.args.dry_run: return True, {'throughput': 1250e6} result = bist.test_ddr3_with_usrp_probe() return result.get('throughput', 0) > 1000e3, result def bist_gpsdo(self): """ BIST for GPSDO Description: Returns GPS information External Equipment: None; Recommend attaching an antenna or providing fake GPS information Return dictionary: A TPV dictionary as returned by gpsd. See also: http://www.catb.org/gpsd/gpsd_json.html Check for mode 2 or 3 to see if it's locked. """ assert 'gpsdo' in self.tests_to_run if self.args.dry_run: return True, { "class": "TPV", "time": "2017-04-30T11:48:20.10Z", "ept": 0.005, "lat": 30.407899, "lon": -97.726634, "alt": 1327.689, "epx": 15.319, "epy": 17.054, "epv": 124.484, "track": 10.3797, "speed": 0.091, "climb": -0.085, "eps": 34.11, "mode": 3 } from usrp_mpm.periph_manager import n3xx gpio_tca6424 = n3xx.TCA6424(self.mb_rev) # Turn on GPS, give some time to acclimatize gpio_tca6424.set("PWREN-GPS") time.sleep(5) gps_warmup_timeout = float( self.args.option.get('gps_warmup_timeout', GPS_WARMUP_TIMEOUT)) gps_lockok_timeout = float( self.args.option.get('gps_lockok_timeout', GPS_LOCKOK_TIMEOUT)) # Wait for WARMUP to go low sys.stderr.write( "Waiting for WARMUP to go low for up to {} seconds...\n".format( gps_warmup_timeout)) if not bist.poll_with_timeout( lambda: not gpio_tca6424.get('GPS-WARMUP'), gps_warmup_timeout*1000, 1000 ): raise RuntimeError( "GPS-WARMUP did not go low within {} seconds!".format( gps_warmup_timeout)) sys.stderr.write("Chip is warmed up.\n") # Wait for LOCKOK. Data sheet says wait up to 15 minutes for GPS lock. sys.stderr.write( "Waiting for LOCKOK to go high for up to {} seconds...\n".format( gps_lockok_timeout)) if not bist.poll_with_timeout( lambda: gpio_tca6424.get('GPS-LOCKOK'), gps_lockok_timeout*1000, 1000 ): sys.stderr.write("No GPS-LOCKOK!\n") sys.stderr.write("GPS-SURVEY status: {}\n".format( gpio_tca6424.get('GPS-SURVEY') )) sys.stderr.write("GPS-PHASELOCK status: {}\n".format( gpio_tca6424.get('GPS-PHASELOCK') )) sys.stderr.write("GPS-ALARM status: {}\n".format( gpio_tca6424.get('GPS-ALARM') )) # Now the chip is on, read back the TPV result result = bist.get_gpsd_tpv_result() # If we reach this line, we have a valid result and the chip responded. # However, it doesn't necessarily mean we had a GPS lock. return True, result def bist_tpm(self): """ BIST for TPM (Trusted Platform Module) This reads the caps value for all detected TPM devices. Return dictionary: - tpm_caps: TPM manufacturer and version info. Is a multi-line string. Return status: True if exactly one TPM device is detected. """ assert 'tpm' in self.tests_to_run if self.args.dry_run: return True, { 'tpm0_caps': "Fake caps value\n\nVersion 0.0.0", } result = bist.get_tpm_caps_info() return len(result) == 1, result def bist_ref_clock_int(self): """ BIST for clock lock from internal (25 MHz) source. Description: Checks to see if the daughtercard can lock to an internal clock source. External Equipment: None Return dictionary: - : - locked: Boolean lock status There can be multiple ref lock sensors; for a pass condition they all need to be asserted. """ assert 'ref_clock_int' in self.tests_to_run if self.args.dry_run: return True, {'ref_locked': True} result = bist.get_ref_clock_prop( 'internal', 'internal', extra_args={'skip_rfic': 1, 'rfnoc_num_blocks': 0} ) return 'error_msg' not in result, result def bist_ref_clock_ext(self): """ BIST for clock lock from external source. Note: This test requires a connected daughterboard with a 'ref lock' sensor available. Description: Checks to see if the daughtercard can lock to the external reference clock. External Equipment: 10 MHz reference Source connected to "ref in". Return dictionary: - : - locked: Boolean lock status There can be multiple ref lock sensors; for a pass condition they all need to be asserted. """ assert 'ref_clock_ext' in self.tests_to_run if self.args.dry_run: return True, {'ref_locked': True} result = bist.get_ref_clock_prop( 'external', 'external', extra_args={'skip_rfic': 1, 'rfnoc_num_blocks': 0} ) return 'error_msg' not in result, result def bist_ref_clock_gpsdo(self): """ BIST for clock lock from external source. Note: This test requires a connected daughterboard with a 'ref lock' sensor available. Description: Checks to see if the daughtercard can lock to the external reference clock. External Equipment: 10 MHz reference Source connected to "ref in". Return dictionary: - : - locked: Boolean lock status There can be multiple ref lock sensors; for a pass condition they all need to be asserted. """ assert 'ref_clock_gpsdo' in self.tests_to_run if self.args.dry_run: return True, {'ref_locked': True} result = bist.get_ref_clock_prop( 'gpsdo', 'gpsdo', extra_args={'skip_rfic': 1, 'rfnoc_num_blocks': 0} ) return 'error_msg' not in result, result def bist_sfp0_loopback(self): """ BIST for SFP+ ports: Description: Uses one SFP+ port to test the other. Pipes data out through one SFP, back to the other. External Equipment: Loopback module in SFP0 required required. Return dictionary: - elapsed_time: Float value, test time in seconds - max_roundtrip_latency: Float value, max roundtrip latency in seconds - throughput: Approximate data throughput in bytes/s - max_ber: Estimated maximum BER, float value. - errors: Number of errors - bits: Number of bits that were transferred """ if self.args.dry_run: return True, bist.get_sfp_bist_defaults() sfp_bist_results = bist.run_aurora_bist( device_args=self.device_args, product_id=self.get_product_id(), master='misc-auro-regs0', ) self.reload_fpga_image = True return bist.aurora_results_to_status(sfp_bist_results) def bist_sfp1_loopback(self): """ BIST for SFP+ ports: Description: Uses one SFP+ port to test the other. Pipes data out through one SFP, back to the other. External Equipment: Loopback module in SFP1 required required. Return dictionary: - elapsed_time: Float value, test time in seconds - max_roundtrip_latency: Float value, max roundtrip latency in seconds - throughput: Approximate data throughput in bytes/s - max_ber: Estimated maximum BER, float value. - errors: Number of errors - bits: Number of bits that were transferred """ if self.args.dry_run: return True, bist.get_sfp_bist_defaults() sfp_bist_results = bist.run_aurora_bist( device_args=self.device_args, product_id=self.get_product_id(), master='misc-auro-regs1', ) self.reload_fpga_image = True return bist.aurora_results_to_status(sfp_bist_results) def bist_qsfp_loopback(self): """ BIST for QSFP+ ports: Description: Tests individual quads of the QSFP+ connector. You need to provide `--option qsfp_port=X` to select the QSFP+ connector. External Equipment: Loopback module in QSFPX required Return dictionary: - elapsed_time: Float value, test time in seconds - max_roundtrip_latency: Float value, max roundtrip latency in seconds - throughput: Approximate data throughput in bytes/s - max_ber: Estimated maximum BER, float value. - errors: Number of errors - bits: Number of bits that were transferred """ if self.args.dry_run: return True, bist.get_sfp_bist_defaults() from usrp_mpm.sys_utils import i2c_dev from usrp_mpm.periph_manager import n3xx qsfp_i2c = i2c_dev.of_get_i2c_adapter(n3xx.N32X_QSFP_I2C_LABEL) if qsfp_i2c is None: raise RuntimeError("Could not find QSFP board!") qsfp_port = int(self.args.option.get('qsfp_port', '0')) assert qsfp_port in range(4) aurora_regs_label = 'misc-auro-regs{}'.format(qsfp_port) sfp_bist_results = bist.run_aurora_bist( device_args=self.device_args, # Note: We're overwriting the product ID here, because the detection # is currently limited to reading the Mboard EEPROM. However, only # the N320 has the QSFP board. product_id='n320', aurora_image_type='AQ', master=aurora_regs_label) return bist.aurora_results_to_status(sfp_bist_results) def bist_sfp_loopback(self): """ BIST for SFP+ ports: Description: Uses one SFP+ port to test the other. Pipes data out through one SFP, back to the other. External Equipment: Loopback cable between the two SFP+ ports required. Return dictionary: - elapsed_time: Float value, test time in seconds - max_roundtrip_latency: Float value, max roundtrip latency in seconds - throughput: Approximate data throughput in bytes/s - max_ber: Estimated maximum BER, float value. - errors: Number of errors - bits: Number of bits that were transferred """ if self.args.dry_run: return True, bist.get_sfp_bist_defaults() sfp_bist_results = bist.run_aurora_bist( device_args=self.device_args, product_id=self.get_product_id(), master='misc-auro-regs0', slave='misc-auro-regs1', ) self.reload_fpga_image = True return bist.aurora_results_to_status(sfp_bist_results) def bist_gpio(self): """ BIST for GPIO Description: Writes and reads the values to the GPIO Needed Equipment: External loopback as follows GPIO 0<->6 1<->7 2<->8 3<->9 4<->10 5<->11 Return dictionary: - write_patterns: A list of patterns that were written - read_patterns: A list of patterns that were read back """ assert 'gpio' in self.tests_to_run # patterns = list(range(64)) GPIO_WIDTH = 12 patterns = range(64) if self.args.dry_run: return True, { 'write_patterns': list(patterns), 'read_patterns': list(patterns), } from usrp_mpm.periph_manager import n3xx, n3xx_periphs gpio_tca6424 = n3xx_periphs.TCA6424(self.mb_rev) gpio_tca6424.set("FPGA-GPIO-EN") mb_regs = n3xx_periphs.MboardRegsControl(n3xx.n3xx.mboard_regs_label, self.log) mb_regs.set_fp_gpio_master(0xFFF) # Allow some time for the front-panel GPIOs to become usable time.sleep(.5) ddr1 = 0x03f ddr2 = 0xfc0 def _run_gpio(ddr, patterns): " Run a GPIO test for a given set of patterns " gpio_ctrl = n3xx_periphs.FrontpanelGPIO(ddr) for pattern in patterns: bist.gpio_set_all(gpio_ctrl, pattern, GPIO_WIDTH, ddr) time.sleep(0.1) gpio_rb = gpio_ctrl.get_all() if pattern != gpio_rb: return False, {'write_patterns': [pattern], 'read_patterns': [gpio_rb]} return True, {'write_patterns': list(patterns), 'read_patterns': list(patterns)} status, data = _run_gpio(ddr1, patterns) if not status: return status, data status, data = _run_gpio(ddr2, patterns) return status, data def bist_temp(self): """ BIST for temperature sensors Description: Reads the temperature sensors on the motherboards and returns their values in mC Return dictionary: - : temp in mC """ assert 'temp' in self.tests_to_run if self.args.dry_run: return True, {'fpga-thermal-zone': 30000} result = bist.get_temp_sensor_value( lambda device: device.attributes.get('type').decode('ascii')) if len(result) < 1: result['error_msg'] = "No temperature sensors found!" return 'error_msg' not in result, result def bist_fan(self): """ BIST for temperature sensors Description: Reads the RPM values of the fans on the motherboard Return dictionary: - : Fan speed in RPM External Equipment: None """ assert 'fan' in self.tests_to_run if self.args.dry_run: return True, {'cooling_device0': 10000, 'cooling_device1': 10000} result = bist.get_fan_values() return len(result) == 2, result def bist_whiterabbit(self): """ BIST for White Rabbit. Description: Checks if the WR core can lock. External Equipment: A WR source needs to be connected to SFP0. """ assert 'whiterabbit' in self.tests_to_run if self.args.dry_run: return True, {'lock': True} from usrp_mpm.cores import WhiteRabbitRegsControl from usrp_mpm.periph_manager.n3xx import n3xx from usrp_mpm.periph_manager import n3xx_periphs from usrp_mpm.sys_utils import uio if not uio.find_uio_device(n3xx.wr_regs_label, logger=self.log)[0]: self.log.info("Need to load WX image before proceeding...") bist.load_fpga_image( 'WX', self.device_args, self.get_product_id(), ) self.log.info("Image loading complete.") self.reload_fpga_image = True mb_regs = n3xx_periphs.MboardRegsControl( n3xx.mboard_regs_label, self.log) mb_regs.set_time_source('sfp0', 25e6) wr_regs_control = WhiteRabbitRegsControl( n3xx.wr_regs_label, self.log) lock_status = bist.poll_with_timeout( lambda: wr_regs_control.get_time_lock_status(), 40000, # Try for x ms... this number is set from a few benchtop tests 1000, # Poll every... second! why not? ) result = { 'lock_status': int(lock_status), } return lock_status, result ############################################################################## # main ############################################################################## def main(): " Go, go, go! " return N3XXBIST().run() if __name__ == '__main__': exit(not main())