//
// Copyright 2015 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.
//

#include <fstream>
#include <vector>

#include <boost/algorithm/string.hpp>
#include <boost/filesystem.hpp>
#include <boost/property_tree/ptree.hpp>
#include <boost/property_tree/xml_parser.hpp>

#include <uhd/config.hpp>
#include <uhd/device.hpp>
#include <uhd/image_loader.hpp>
#include <uhd/exception.hpp>
#include <uhd/transport/udp_simple.hpp>
#include <uhd/transport/nirio/niusrprio_session.h>
#include <uhd/transport/nirio/status.h>
#include <uhd/utils/byteswap.hpp>
#include <uhd/utils/paths.hpp>
#include <uhd/utils/static.hpp>

#include "x300_impl.hpp"
#include "x300_fw_common.h"
#include "cdecode.h"

namespace fs = boost::filesystem;

using namespace boost::algorithm;
using namespace uhd;
using namespace uhd::transport;

/*
 * Constants
 */
#define X300_FPGA_BIN_SIZE_BYTES 15877916
#define X300_FPGA_BIT_SIZE_BYTES 15878032
#define X300_FPGA_PROG_UDP_PORT 49157
#define X300_FLASH_SECTOR_SIZE 131072
#define X300_PACKET_SIZE_BYTES 256
#define X300_FPGA_SECTOR_START 32
#define X300_MAX_RESPONSE_BYTES 128
#define UDP_TIMEOUT 3
#define FPGA_LOAD_TIMEOUT 15

/*
 * Packet structure
 */
typedef struct {
    uint32_t flags;
    uint32_t sector;
    uint32_t index;
    uint32_t size;
    union {
        uint8_t  data8[X300_PACKET_SIZE_BYTES];
        uint16_t data16[X300_PACKET_SIZE_BYTES/2];
    };
} x300_fpga_update_data_t;

/*
 * X-Series burn session
 */
typedef struct {
    bool                             found;
    bool                             ethernet;
    bool                             configure; // Reload FPGA after burning to flash (Ethernet only)
    bool                             verify;    // Device will verify the download along the way (Ethernet only)
    bool                             lvbitx;
    uhd::device_addr_t               dev_addr;
    std::string                      ip_addr;
    std::string                      fpga_type;
    std::string                      resource;
    std::string                      filepath;
    std::string                      rpc_port;
    uint32_t                  size;
    udp_simple::sptr                 xport;
    std::vector<char>                bitstream; // .bin image extracted from .lvbitx file
    uint8_t                   data_in[udp_simple::mtu];
} x300_session_t;

/*
 * Extract the .bin image from the given LVBITX file.
 */
static void extract_from_lvbitx(x300_session_t &session){
    boost::property_tree::ptree pt; 
    boost::property_tree::xml_parser::read_xml(session.filepath.c_str(), pt, 
                                               boost::property_tree::xml_parser::no_comments |
                                               boost::property_tree::xml_parser::trim_whitespace);
    const std::string encoded_bitstream(pt.get<std::string>("Bitfile.Bitstream"));
    std::vector<char> decoded_bitstream(encoded_bitstream.size());

    base64_decodestate decode_state;
    base64_init_decodestate(&decode_state);
    const size_t decoded_size = base64_decode_block(encoded_bitstream.c_str(),
                                encoded_bitstream.size(), &decoded_bitstream.front(), &decode_state);
    decoded_bitstream.resize(decoded_size);
    session.bitstream.swap(decoded_bitstream);

    session.size = session.bitstream.size();
}

/*
 * Validate X300 image and extract if LVBITX.
 */
static void x300_validate_image(x300_session_t &session){
    if(not fs::exists(session.filepath)){
        throw uhd::runtime_error(str(boost::format("Could not find image at path \"%s\".")
                                     % session.filepath));
    }

    std::string extension = fs::extension(session.filepath);
    session.lvbitx = (extension == ".lvbitx");

    if(session.lvbitx){
        extract_from_lvbitx(session);
        if(session.size > X300_FPGA_BIN_SIZE_BYTES){
            throw uhd::runtime_error(str(boost::format("The specified FPGA image is too large: %d vs. %d")
                                         % session.size % X300_FPGA_BIN_SIZE_BYTES));
        }

        /*
         * PCIe burning just takes a filepath, even for a .lvbitx file,
         * so just extract it to validate the size.
         */
        if(!session.ethernet) session.bitstream.clear();
    }
    else if(extension == ".bin" or extension == ".bit"){
        uint32_t max_size = (extension == ".bin") ? X300_FPGA_BIN_SIZE_BYTES
                                                         : X300_FPGA_BIT_SIZE_BYTES;

        session.size = fs::file_size(session.filepath);
        if(session.size > max_size){
            throw uhd::runtime_error(str(boost::format("The specified FPGA image is too large: %d vs. %d")
                                         % session.size % max_size));
            return;
        }
    }
    else{
        throw uhd::runtime_error(str(boost::format("Invalid extension \"%s\". Extension must be .bin, .bit, or .lvbitx.")
                                     % extension));
    }
}

static void x300_setup_session(x300_session_t &session,
                               const device_addr_t &args,
                               const std::string &filepath){
    device_addrs_t devs = x300_find(args);
    if(devs.size() == 0){
        session.found = false;
        return;
    }
    else if(devs.size() > 1){
        std::string err_msg = "Could not resolve given args to a single X-Series device.\n"
                              "Applicable devices:\n";

        BOOST_FOREACH(const uhd::device_addr_t &dev, devs){
            std::string identifier = dev.has_key("addr") ? "addr"
                                                         : "resource";

            err_msg += str(boost::format(" * %s (%s=%s)\n")
                           % dev.get("product", "X3XX")
                           % identifier
                           % dev.get(identifier));
        }

        err_msg += "\nSpecify one of these devices with the given args to load an image onto it.";

        throw uhd::runtime_error(err_msg);
    }

    session.found = true;
    session.dev_addr = devs[0];
    session.ethernet = session.dev_addr.has_key("addr");
    if(session.ethernet){
        session.ip_addr = session.dev_addr["addr"];
        session.configure = args.has_key("configure");
        session.xport = udp_simple::make_connected(session.ip_addr,
                                                   BOOST_STRINGIZE(X300_FPGA_PROG_UDP_PORT));
        session.verify = args.has_key("verify");
    }
    else{
        session.resource = session.dev_addr["resource"];
        session.rpc_port = args.get("rpc-port", "5444");
    }

    /*
     * The user can specify an FPGA type (1G, HGS, XGS), rather than a filename. If the user
     * does not specify one, this will default to the type currently on the device. If this
     * cannot be determined, then the user is forced to specify a filename.
     */
    session.fpga_type = args.get("fpga", session.dev_addr.get("fpga", ""));
    if(filepath == ""){
        if(!session.dev_addr.has_key("product") or session.fpga_type == ""){
            throw uhd::runtime_error("Found a device but could not auto-generate an image filename.");
        }
        else session.filepath = find_image_path(str(boost::format("usrp_%s_fpga_%s.bit")
                                                    % (to_lower_copy(session.dev_addr["product"]))
                                                    % session.fpga_type));
    }
    else session.filepath = filepath;

    // Validate image
    x300_validate_image(session);
}

/*
 * Ethernet communication functions
 */
static UHD_INLINE size_t x300_send_and_recv(udp_simple::sptr xport,
                                            uint32_t pkt_code,
                                            x300_fpga_update_data_t *pkt_out,
                                            uint8_t* data){
    pkt_out->flags = uhd::htonx<uint32_t>(pkt_code);
    xport->send(boost::asio::buffer(pkt_out, sizeof(*pkt_out)));
    return xport->recv(boost::asio::buffer(data, udp_simple::mtu), UDP_TIMEOUT);
}

static UHD_INLINE bool x300_recv_ok(const x300_fpga_update_data_t *pkt_in,
                                    size_t len){
    return (len > 0 and
            ((ntohl(pkt_in->flags) & X300_FPGA_PROG_FLAGS_ERROR) != X300_FPGA_PROG_FLAGS_ERROR));
}

// Image data needs to be bitswapped
static UHD_INLINE void x300_bitswap(uint8_t *num){
    *num = ((*num & 0xF0) >> 4) | ((*num & 0x0F) << 4);
    *num = ((*num & 0xCC) >> 2) | ((*num & 0x33) << 2);
    *num = ((*num & 0xAA) >> 1) | ((*num & 0x55) << 1);
} 

static void x300_ethernet_load(x300_session_t &session){

    // UDP receive buffer
    x300_fpga_update_data_t pkt_out;
    const x300_fpga_update_data_t *pkt_in = reinterpret_cast<const x300_fpga_update_data_t*>(session.data_in);

    // Initialize write session
    uint32_t flags = X300_FPGA_PROG_FLAGS_ACK | X300_FPGA_PROG_FLAGS_INIT;
    size_t len = x300_send_and_recv(session.xport, flags, &pkt_out, session.data_in);
    if(x300_recv_ok(pkt_in, len)){
        std::cout << "-- Initializing FPGA loading..." << std::flush;
    }
    else if(len == 0){
        std::cout << "failed." << std::endl;
        throw uhd::runtime_error("Timed out waiting for reply from device.");
    }
    else{
        std::cout << "failed." << std::endl;
        throw uhd::runtime_error("Device reported an error during initialization.");
    }

    std::cout << "successful." << std::endl;
    if(session.verify){
        std::cout << "-- NOTE: Device is verifying the image it is receiving, increasing the loading time." << std::endl;
    }

    size_t current_pos = 0;
    size_t sectors = (session.size / X300_FLASH_SECTOR_SIZE);
    std::ifstream image(session.filepath.c_str(), std::ios::binary);

    // Each sector
    for(size_t i = 0; i < session.size; i += X300_FLASH_SECTOR_SIZE){

        // Print progress percentage at beginning of each sector
        std::cout << boost::format("\r-- Loading %s FPGA image: %d%% (%d/%d sectors)")
                     % session.fpga_type
                     % (int(double(i) / double(session.size) * 100.0))
                     % (i / X300_FLASH_SECTOR_SIZE)
                     % sectors
                 << std::flush;

        // Each packet
        for(size_t j = i; (j < session.size and j < (i+X300_FLASH_SECTOR_SIZE)); j += X300_PACKET_SIZE_BYTES){
            flags = X300_FPGA_PROG_FLAGS_ACK;
            if(j == i)         flags |= X300_FPGA_PROG_FLAGS_ERASE; // Erase at beginning of sector
            if(session.verify) flags |= X300_FPGA_PROG_FLAGS_VERIFY;

            // Set burn location
            pkt_out.sector = htonx<uint32_t>(X300_FPGA_SECTOR_START + (i/X300_FLASH_SECTOR_SIZE));
            pkt_out.index  = htonx<uint32_t>((j % X300_FLASH_SECTOR_SIZE) / 2);
            pkt_out.size   = htonx<uint32_t>(X300_PACKET_SIZE_BYTES / 2);

            // Read next piece of image
            memset(pkt_out.data8, 0, X300_PACKET_SIZE_BYTES);
            if(session.lvbitx){
                memcpy(pkt_out.data8, &session.bitstream[current_pos], X300_PACKET_SIZE_BYTES);
                current_pos += X300_PACKET_SIZE_BYTES;
            }
            else{
                image.read((char*)pkt_out.data8, X300_PACKET_SIZE_BYTES);
            }

            // Data must be bitswapped and byteswapped
            for(size_t k = 0; k < X300_PACKET_SIZE_BYTES; k++){
                x300_bitswap(&pkt_out.data8[k]);
            }
            for(size_t k = 0; k < (X300_PACKET_SIZE_BYTES/2); k++){
                pkt_out.data16[k] = htonx<uint16_t>(pkt_out.data16[k]);
            }

            len = x300_send_and_recv(session.xport, flags, &pkt_out, session.data_in);
            if(len == 0){
                if(!session.lvbitx) image.close();
                throw uhd::runtime_error("Timed out waiting for reply from device.");
            }
            else if((ntohl(pkt_in->flags) & X300_FPGA_PROG_FLAGS_ERROR)){
                if(!session.lvbitx) image.close();
                throw uhd::runtime_error("Device reported an error.");
            }
        }
    }
    if(!session.lvbitx){
        image.close();
    }

    std::cout << boost::format("\r-- Loading %s FPGA image: 100%% (%d/%d sectors)")
                 % session.fpga_type
                 % sectors
                 % sectors
             << std::endl;

    // Cleanup
    if(!session.lvbitx) image.close();
    flags = (X300_FPGA_PROG_FLAGS_CLEANUP | X300_FPGA_PROG_FLAGS_ACK);
    pkt_out.sector = pkt_out.index = pkt_out.size = 0;
    memset(pkt_out.data8, 0, X300_PACKET_SIZE_BYTES);
    std::cout << "-- Finalizing image load..." << std::flush;
    len = x300_send_and_recv(session.xport, flags, &pkt_out, session.data_in);
    if(len == 0){
        std::cout << "failed." << std::endl;
        throw uhd::runtime_error("Timed out waiting for reply from device.");
    }
    else if((ntohl(pkt_in->flags) & X300_FPGA_PROG_FLAGS_ERROR)){
        std::cout << "failed." << std::endl;
        throw uhd::runtime_error("Device reported an error during cleanup.");
    }
    else std::cout << "successful." << std::endl;

    // Save new FPGA image (if option set)
    if(session.configure){
        flags = (X300_FPGA_PROG_CONFIGURE | X300_FPGA_PROG_FLAGS_ACK);
        x300_send_and_recv(session.xport, flags, &pkt_out, session.data_in);
        std::cout << "-- Saving image onto device..." << std::flush;
        if(len == 0){
            std::cout << "failed." << std::endl;
            throw uhd::runtime_error("Timed out waiting for reply from device.");
        }
        else if((ntohl(pkt_in->flags) & X300_FPGA_PROG_FLAGS_ERROR)){
            std::cout << "failed." << std::endl;
            throw uhd::runtime_error("Device reported an error while saving the image.");
        }
        else std::cout << "successful." << std::endl;
    }
    std::cout << str(boost::format("Power-cycle the USRP %s to use the new image.") % session.dev_addr.get("product", "")) << std::endl;
}

static void x300_pcie_load(x300_session_t &session){

    std::cout << boost::format("\r-- Loading %s FPGA image (this will take 5-10 minutes)...")
                 % session.fpga_type
             << std::flush;

    nirio_status status = NiRio_Status_Success;
    niusrprio::niusrprio_session fpga_session(session.resource, session.rpc_port);
    nirio_status_chain(fpga_session.download_bitstream_to_flash(session.filepath), status);

    if(nirio_status_fatal(status)){
        std::cout << "failed." << std::endl;
        niusrprio::nirio_status_to_exception(status, "NI-RIO reported the following error:");
    }
    else std::cout << "successful." << std::endl;
    std::cout << str(boost::format("Power-cycle the USRP %s to use the new image.") % session.dev_addr.get("product", "")) << std::endl;
}

static bool x300_image_loader(const image_loader::image_loader_args_t &image_loader_args){
    // See if any X3x0 with the given args is found
    device_addrs_t devs = x300_find(image_loader_args.args);
    if(devs.size() == 0 or !image_loader_args.load_fpga) return false;

    x300_session_t session;
    x300_setup_session(session,
                       image_loader_args.args,
                       image_loader_args.fpga_path
                      );
    if(!session.found) return false;

    std::cout << boost::format("Unit: USRP %s (%s, %s)\nFPGA Image: %s\n")
                 % session.dev_addr["product"]
                 % session.dev_addr["serial"]
                 % session.dev_addr[session.ethernet ? "addr" : "resource"]
                 % session.filepath;

    if(session.ethernet) x300_ethernet_load(session);
    else                 x300_pcie_load(session);
    return true;
}

UHD_STATIC_BLOCK(register_x300_image_loader){
    std::string recovery_instructions = "Aborting. Your USRP X-Series device will likely be unusable. Visit\n"
                                        "http://files.ettus.com/manual/page_usrp_x3x0.html#x3x0_load_fpga_imgs_jtag\n"
                                        "for details on restoring your device.";

    image_loader::register_image_loader("x300", x300_image_loader, recovery_instructions);
}