//
// Copyright 2013-2014 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.
//

#include "lmk04816_regs.hpp"
#include "x300_clock_ctrl.hpp"
#include <uhd/utils/safe_call.hpp>
#include <boost/cstdint.hpp>
#include <boost/format.hpp>
#include <stdexcept>
#include <cmath>
#include <cstdlib>

static const double X300_REF_CLK_OUT_RATE  = 10e6;

using namespace uhd;

x300_clock_ctrl::~x300_clock_ctrl(void){
    /* NOP */
}

class x300_clock_ctrl_impl : public x300_clock_ctrl    {

public:

~x300_clock_ctrl_impl(void) {}

x300_clock_ctrl_impl(uhd::spi_iface::sptr spiface,
    const size_t slaveno,
    const size_t hw_rev,
    const double master_clock_rate,
    const double system_ref_rate):
    _spiface(spiface),
    _slaveno(slaveno),
    _hw_rev(hw_rev),
    _master_clock_rate(master_clock_rate),
    _system_ref_rate(system_ref_rate)
{
}

void reset_clocks() {
    set_master_clock_rate(_master_clock_rate);
}

void sync_clocks(void) {
    //soft sync:
    //put the sync IO into output mode - FPGA must be input
    //write low, then write high - this triggers a soft sync
    _lmk04816_regs.SYNC_POL_INV = lmk04816_regs_t::SYNC_POL_INV_SYNC_LOW;
    this->write_regs(11);
    _lmk04816_regs.SYNC_POL_INV = lmk04816_regs_t::SYNC_POL_INV_SYNC_HIGH;
    this->write_regs(11);
}

double get_master_clock_rate(void) {
    return _master_clock_rate;
}

double get_sysref_clock_rate(void) {
    return _system_ref_rate;
}

double get_refout_clock_rate(void) {
    //We support only one reference output rate
    return X300_REF_CLK_OUT_RATE;
}

void set_dboard_rate(const x300_clock_which_t, double rate) {
    if(not doubles_are_equal(rate, get_master_clock_rate())) {
        throw uhd::not_implemented_error("x3xx set dboard clock rate does not support setting an arbitrary clock rate");
    }
}

std::vector<double> get_dboard_rates(const x300_clock_which_t) {
    /* Right now, the only supported daughterboard clock rate is the master clock
    * rate. TODO Implement divider settings for lower clock rates for legacy
    * daughterboard support. */

    std::vector<double> rates;
    rates.push_back(get_master_clock_rate());
    return rates;
}

void set_ref_out(const bool enable) {
    // TODO  Implement divider configuration to allow for configurable output
    // rates
    if (enable)
        _lmk04816_regs.CLKout10_TYPE = lmk04816_regs_t::CLKOUT10_TYPE_LVDS;
    else
        _lmk04816_regs.CLKout10_TYPE = lmk04816_regs_t::CLKOUT10_TYPE_P_DOWN;
    this->write_regs(8);
}

void write_regs(boost::uint8_t addr) {
    boost::uint32_t data = _lmk04816_regs.get_reg(addr);
    _spiface->write_spi(_slaveno, spi_config_t::EDGE_RISE, data,32);
}


private:

void set_master_clock_rate(double clock_rate) {
    /* The X3xx has two primary rates. The first is the
     * _system_ref_rate, which is sourced from the "clock_source"/"value" field
     * of the property tree, and whose value can be 10e6, 30.72e6, or 200e6.
     * The _system_ref_rate is the input to the clocking system, and
     * what comes out is a disciplined master clock running at the
     * _master_clock_rate. As such, only certain combinations of
     * system reference rates and master clock rates are supported.
     * Additionally, a subset of these will operate in "zero delay" mode. */

    enum opmode_t { INVALID,
                    m10M_200M_NOZDEL,      // used for debug purposes only
                    m10M_200M_ZDEL,        // Normal mode
                    m30_72M_184_32M_ZDEL,  // LTE with external ref, aka CPRI Mode
                    m10M_184_32M_NOZDEL,   // LTE with 10 MHz ref
                    m10M_120M_ZDEL };       // NI USRP 120 MHz Clocking

    /* The default clocking mode is 10MHz reference generating a 200 MHz master
     * clock, in zero-delay mode. */
    opmode_t clocking_mode = INVALID;

    if(doubles_are_equal(_system_ref_rate, 10e6)) {
        if(doubles_are_equal(clock_rate, 184.32e6)) {
            /* 10MHz reference, 184.32 MHz master clock out, NOT Zero Delay. */
            clocking_mode = m10M_184_32M_NOZDEL;
        } else if(doubles_are_equal(clock_rate, 200e6)) {
            /* 10MHz reference, 200 MHz master clock out, Zero Delay */
            clocking_mode = m10M_200M_ZDEL;
        } else if(doubles_are_equal(clock_rate, 120e6)) {
            /* 10MHz reference, 120 MHz master clock rate, Zero Delay */
            clocking_mode = m10M_120M_ZDEL;
        }
    } else if(doubles_are_equal(_system_ref_rate, 30.72e6)) {
        if(doubles_are_equal(clock_rate, 184.32e6)) {
            /* 30.72MHz reference, 184.32 MHz master clock out, Zero Delay */
            clocking_mode = m30_72M_184_32M_ZDEL;
        }
    }

    if(clocking_mode == INVALID) {
        throw uhd::runtime_error(str(boost::format("A master clock rate of %f cannot be derived from a system reference rate of %f") % clock_rate % _system_ref_rate));
    }

    // For 200 MHz output, the VCO is run at 2400 MHz
    // For the LTE/CPRI rate of 184.32 MHz, the VCO runs at 2580.48 MHz

    int vco_div = 0;

    // Note: PLL2 N2 prescaler is enabled for all cases
    //       PLL2 reference doubler is enabled for all cases

    /* All LMK04816 settings are from the LMK datasheet for our clocking
     * architecture. Please refer to the datasheet for more information. */
    switch (clocking_mode) {
        case m10M_200M_NOZDEL:
            vco_div = 12;
            _lmk04816_regs.MODE = lmk04816_regs_t::MODE_DUAL_INT;

            // PLL1 - 2 MHz compare frequency
            _lmk04816_regs.PLL1_N_28 = 48;
            _lmk04816_regs.PLL1_R_27 = 5;
            _lmk04816_regs.PLL1_CP_GAIN_27 = lmk04816_regs_t::PLL1_CP_GAIN_27_100UA;

            // PLL2 - 48 MHz compare frequency
            _lmk04816_regs.PLL2_N_30 = 25;
            _lmk04816_regs.PLL2_P_30 = lmk04816_regs_t::PLL2_P_30_DIV_2A;
            _lmk04816_regs.PLL2_R_28 = 4;
            _lmk04816_regs.PLL2_CP_GAIN_26 = lmk04816_regs_t::PLL2_CP_GAIN_26_3200UA;

            break;

        case m10M_200M_ZDEL:
            vco_div = 12;
            _lmk04816_regs.MODE = lmk04816_regs_t::MODE_DUAL_INT_ZER_DELAY;

            // PLL1 - 2 MHz compare frequency
            _lmk04816_regs.PLL1_N_28 = 100;
            _lmk04816_regs.PLL1_R_27 = 5;
            _lmk04816_regs.PLL1_CP_GAIN_27 = lmk04816_regs_t::PLL1_CP_GAIN_27_100UA;

            // PLL2 - 96 MHz compare frequency
            _lmk04816_regs.PLL2_N_30 = 5;
            _lmk04816_regs.PLL2_P_30 = lmk04816_regs_t::PLL2_P_30_DIV_5;
            _lmk04816_regs.PLL2_R_28 = 2;

            if(_hw_rev <= 4)
                _lmk04816_regs.PLL2_CP_GAIN_26 = lmk04816_regs_t::PLL2_CP_GAIN_26_1600UA;
            else
                _lmk04816_regs.PLL2_CP_GAIN_26 = lmk04816_regs_t::PLL2_CP_GAIN_26_400UA;

            break;

        case m30_72M_184_32M_ZDEL:
            vco_div=14;
            _lmk04816_regs.MODE = lmk04816_regs_t::MODE_DUAL_INT_ZER_DELAY;

            // PLL1 - 2.048 MHz compare frequency
            _lmk04816_regs.PLL1_N_28 = 90;
            _lmk04816_regs.PLL1_R_27 = 15;
            _lmk04816_regs.PLL1_CP_GAIN_27 = lmk04816_regs_t::PLL1_CP_GAIN_27_100UA;

            // PLL2 - 7.68 MHz compare frequency
            _lmk04816_regs.PLL2_N_30 = 168;
            _lmk04816_regs.PLL2_P_30 = lmk04816_regs_t::PLL2_P_30_DIV_2A;
            _lmk04816_regs.PLL2_R_28 = 25;
            _lmk04816_regs.PLL2_CP_GAIN_26 = lmk04816_regs_t::PLL2_CP_GAIN_26_3200UA;

            _lmk04816_regs.PLL2_R3_LF = lmk04816_regs_t::PLL2_R3_LF_1KILO_OHM;
            _lmk04816_regs.PLL2_C3_LF = lmk04816_regs_t::PLL2_C3_LF_39PF;

            _lmk04816_regs.PLL2_R4_LF = lmk04816_regs_t::PLL2_R4_LF_1KILO_OHM;
            _lmk04816_regs.PLL2_C4_LF = lmk04816_regs_t::PLL2_C4_LF_34PF;

            break;

        case m10M_184_32M_NOZDEL:
            vco_div=14;
            _lmk04816_regs.MODE = lmk04816_regs_t::MODE_DUAL_INT;

            // PLL1 - 2 MHz compare frequency
            _lmk04816_regs.PLL1_N_28 = 48;
            _lmk04816_regs.PLL1_R_27 = 5;
            _lmk04816_regs.PLL1_CP_GAIN_27 = lmk04816_regs_t::PLL1_CP_GAIN_27_100UA;

            // PLL2 - 7.68 MHz compare frequency
            _lmk04816_regs.PLL2_N_30 = 168;
            _lmk04816_regs.PLL2_P_30 = lmk04816_regs_t::PLL2_P_30_DIV_2A;
            _lmk04816_regs.PLL2_R_28 = 25;
            _lmk04816_regs.PLL2_CP_GAIN_26 = lmk04816_regs_t::PLL2_CP_GAIN_26_3200UA;

            _lmk04816_regs.PLL2_R3_LF = lmk04816_regs_t::PLL2_R3_LF_4KILO_OHM;
            _lmk04816_regs.PLL2_C3_LF = lmk04816_regs_t::PLL2_C3_LF_39PF;

            _lmk04816_regs.PLL2_R4_LF = lmk04816_regs_t::PLL2_R4_LF_1KILO_OHM;
            _lmk04816_regs.PLL2_C4_LF = lmk04816_regs_t::PLL2_C4_LF_71PF;

            break;

        case m10M_120M_ZDEL:
            vco_div = 20;
            _lmk04816_regs.MODE = lmk04816_regs_t::MODE_DUAL_INT_ZER_DELAY;

            // PLL1 - 2 MHz compare frequency
            _lmk04816_regs.PLL1_N_28 = 60;
            _lmk04816_regs.PLL1_R_27 = 5;
            _lmk04816_regs.PLL1_CP_GAIN_27 = lmk04816_regs_t::PLL1_CP_GAIN_27_100UA;

            // PLL2 - 96 MHz compare frequency
            _lmk04816_regs.PLL2_N_30 = 5;
            _lmk04816_regs.PLL2_P_30 = lmk04816_regs_t::PLL2_P_30_DIV_5;
            _lmk04816_regs.PLL2_R_28 = 2;

            if(_hw_rev <= 4)
                _lmk04816_regs.PLL2_CP_GAIN_26 = lmk04816_regs_t::PLL2_CP_GAIN_26_1600UA;
            else
                _lmk04816_regs.PLL2_CP_GAIN_26 = lmk04816_regs_t::PLL2_CP_GAIN_26_400UA;

            break;

        default:
            UHD_THROW_INVALID_CODE_PATH();
            break;
    };

    /* Reset the LMK clock controller. */
    _lmk04816_regs.RESET = lmk04816_regs_t::RESET_RESET;
    this->write_regs(0);
    _lmk04816_regs.RESET = lmk04816_regs_t::RESET_NO_RESET;
    this->write_regs(0);

    /* Initial power-up */
    _lmk04816_regs.CLKout0_1_PD = lmk04816_regs_t::CLKOUT0_1_PD_POWER_UP;
    this->write_regs(0);
    _lmk04816_regs.CLKout0_1_DIV = vco_div;
    _lmk04816_regs.CLKout0_ADLY_SEL = lmk04816_regs_t::CLKOUT0_ADLY_SEL_D_EV_X;
    this->write_regs(0);

    // Register 1
    _lmk04816_regs.CLKout2_3_PD = lmk04816_regs_t::CLKOUT2_3_PD_POWER_UP;
    _lmk04816_regs.CLKout2_3_DIV = vco_div;
    // Register 2
    _lmk04816_regs.CLKout4_5_PD = lmk04816_regs_t::CLKOUT4_5_PD_POWER_UP;
    _lmk04816_regs.CLKout4_5_DIV = vco_div;
    // Register 3
    _lmk04816_regs.CLKout6_7_DIV = vco_div;
    _lmk04816_regs.CLKout6_7_OSCin_Sel = lmk04816_regs_t::CLKOUT6_7_OSCIN_SEL_VCO;
    // Register 4
    _lmk04816_regs.CLKout8_9_DIV = vco_div;
    // Register 5
    _lmk04816_regs.CLKout10_11_PD = lmk04816_regs_t::CLKOUT10_11_PD_NORMAL;
    _lmk04816_regs.CLKout10_11_DIV = vco_div * static_cast<int>(clock_rate/X300_REF_CLK_OUT_RATE);

    // Register 6
    _lmk04816_regs.CLKout0_TYPE = lmk04816_regs_t::CLKOUT0_TYPE_LVDS; //FPGA
    _lmk04816_regs.CLKout1_TYPE = lmk04816_regs_t::CLKOUT1_TYPE_P_DOWN; //CPRI feedback clock, use LVDS
    _lmk04816_regs.CLKout2_TYPE = lmk04816_regs_t::CLKOUT2_TYPE_LVPECL_700MVPP; //DB_0_RX
    _lmk04816_regs.CLKout3_TYPE = lmk04816_regs_t::CLKOUT3_TYPE_LVPECL_700MVPP; //DB_1_RX
    // Analog delay of 900ps to synchronize the radio clock with the source synchronous ADC clocks.
    // This delay may need to vary due to temperature.  Tested and verified at room temperature only.
    _lmk04816_regs.CLKout0_1_ADLY = 0x10;

    // Register 7
    _lmk04816_regs.CLKout4_TYPE = lmk04816_regs_t::CLKOUT4_TYPE_LVPECL_700MVPP; //DB_1_TX
    _lmk04816_regs.CLKout5_TYPE = lmk04816_regs_t::CLKOUT5_TYPE_LVPECL_700MVPP; //DB_0_TX
    _lmk04816_regs.CLKout6_TYPE = lmk04816_regs_t::CLKOUT6_TYPE_LVPECL_700MVPP; //DB0_DAC
    _lmk04816_regs.CLKout7_TYPE = lmk04816_regs_t::CLKOUT7_TYPE_LVPECL_700MVPP; //DB1_DAC
    _lmk04816_regs.CLKout8_TYPE = lmk04816_regs_t::CLKOUT8_TYPE_LVPECL_700MVPP; //DB0_ADC

    // Register 8
    _lmk04816_regs.CLKout9_TYPE = lmk04816_regs_t::CLKOUT9_TYPE_LVPECL_700MVPP; //DB1_ADC
    _lmk04816_regs.CLKout10_TYPE = lmk04816_regs_t::CLKOUT10_TYPE_LVDS; //REF_CLKOUT
    _lmk04816_regs.CLKout11_TYPE = lmk04816_regs_t::CLKOUT11_TYPE_P_DOWN; //Debug header, use LVPECL


    // Register 10
    _lmk04816_regs.EN_OSCout0 = lmk04816_regs_t::EN_OSCOUT0_DISABLED; //Debug header
    _lmk04816_regs.FEEDBACK_MUX = 0; //use output 0 (FPGA clock) for feedback
    _lmk04816_regs.EN_FEEDBACK_MUX = lmk04816_regs_t::EN_FEEDBACK_MUX_ENABLED;

    // Register 11
    // MODE set in individual cases above
    _lmk04816_regs.SYNC_QUAL = lmk04816_regs_t::SYNC_QUAL_FB_MUX;
    _lmk04816_regs.EN_SYNC = lmk04816_regs_t::EN_SYNC_ENABLE;
    _lmk04816_regs.NO_SYNC_CLKout0_1 = lmk04816_regs_t::NO_SYNC_CLKOUT0_1_CLOCK_XY_SYNC;
    _lmk04816_regs.NO_SYNC_CLKout2_3 = lmk04816_regs_t::NO_SYNC_CLKOUT2_3_CLOCK_XY_SYNC;
    _lmk04816_regs.NO_SYNC_CLKout4_5 = lmk04816_regs_t::NO_SYNC_CLKOUT4_5_CLOCK_XY_SYNC;
    _lmk04816_regs.NO_SYNC_CLKout6_7 = lmk04816_regs_t::NO_SYNC_CLKOUT6_7_CLOCK_XY_SYNC;
    _lmk04816_regs.NO_SYNC_CLKout8_9 = lmk04816_regs_t::NO_SYNC_CLKOUT8_9_CLOCK_XY_SYNC;
    _lmk04816_regs.NO_SYNC_CLKout10_11 = lmk04816_regs_t::NO_SYNC_CLKOUT10_11_CLOCK_XY_SYNC;
    _lmk04816_regs.SYNC_EN_AUTO = lmk04816_regs_t::SYNC_EN_AUTO_SYNC_INT_GEN;
    _lmk04816_regs.SYNC_POL_INV = lmk04816_regs_t::SYNC_POL_INV_SYNC_LOW;
    _lmk04816_regs.SYNC_TYPE = lmk04816_regs_t::SYNC_TYPE_INPUT;

    // Register 12
    _lmk04816_regs.LD_MUX = lmk04816_regs_t::LD_MUX_BOTH;

    /* Input Clock Configurations */
    // Register 13
    _lmk04816_regs.EN_CLKin0 = lmk04816_regs_t::EN_CLKIN0_NO_VALID_USE;  // This is not connected
    _lmk04816_regs.EN_CLKin2 = lmk04816_regs_t::EN_CLKIN2_NO_VALID_USE;  // Used only for CPRI
    _lmk04816_regs.Status_CLKin1_MUX = lmk04816_regs_t::STATUS_CLKIN1_MUX_UWIRE_RB;
    _lmk04816_regs.CLKin_Select_MODE = lmk04816_regs_t::CLKIN_SELECT_MODE_CLKIN1_MAN;
    _lmk04816_regs.HOLDOVER_MUX = lmk04816_regs_t::HOLDOVER_MUX_PLL1_R;
    // Register 14
    _lmk04816_regs.Status_CLKin1_TYPE = lmk04816_regs_t::STATUS_CLKIN1_TYPE_OUT_PUSH_PULL;
    _lmk04816_regs.Status_CLKin0_TYPE = lmk04816_regs_t::STATUS_CLKIN0_TYPE_OUT_PUSH_PULL;

    // Register 26
    // PLL2_CP_GAIN_26 set above in individual cases
    _lmk04816_regs.PLL2_CP_POL_26 = lmk04816_regs_t::PLL2_CP_POL_26_NEG_SLOPE;
    _lmk04816_regs.EN_PLL2_REF_2X = lmk04816_regs_t::EN_PLL2_REF_2X_DOUBLED_FREQ_REF;

    // Register 27
    // PLL1_CP_GAIN_27 set in individual cases above
    // PLL1_R_27 set in the individual cases above

    // Register 28
    // PLL1_N_28 and PLL2_R_28 are set in the individual cases above

    // Register 29
    _lmk04816_regs.PLL2_N_CAL_29 = _lmk04816_regs.PLL2_N_30;  // N_CAL should always match N
    _lmk04816_regs.OSCin_FREQ_29 = lmk04816_regs_t::OSCIN_FREQ_29_63_TO_127MHZ;

    // Register 30
    // PLL2_P_30 set in individual cases above
    // PLL2_N_30 set in individual cases above

    /* Write the configuration values into the LMK */
    for (size_t i = 1; i <= 16; ++i) {
        this->write_regs(i);
    }
    for (size_t i = 24; i <= 31; ++i) {
        this->write_regs(i);
    }

    this->sync_clocks();
}

UHD_INLINE bool doubles_are_equal(double a, double b) {
    return  (std::fabs(a - b) < std::numeric_limits<double>::epsilon());
}

const spi_iface::sptr _spiface;
const size_t _slaveno;
const size_t _hw_rev;
const double _master_clock_rate;
const double _system_ref_rate;
lmk04816_regs_t _lmk04816_regs;
};

x300_clock_ctrl::sptr x300_clock_ctrl::make(uhd::spi_iface::sptr spiface,
        const size_t slaveno,
        const size_t hw_rev,
        const double master_clock_rate,
        const double system_ref_rate) {
    return sptr(new x300_clock_ctrl_impl(spiface, slaveno, hw_rev,
                master_clock_rate, system_ref_rate));
}