// // Copyright 2010 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by // the Free Software Foundation, either version 3 of the License, or // (at your option) any later version. // // This program is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. // // You should have received a copy of the GNU General Public License // along with this program. If not, see . // #include "usrp2_impl.hpp" #include "usrp2_regs.hpp" #include "../dsp_utils.hpp" #include #include #include #include #include #include #include #include using namespace uhd; using namespace uhd::usrp; /*********************************************************************** * Structors **********************************************************************/ usrp2_mboard_impl::usrp2_mboard_impl( size_t index, transport::udp_simple::sptr ctrl_transport, const usrp2_io_helper &io_helper ): _index(index), _io_helper(io_helper) { //make a new interface for usrp2 stuff _iface = usrp2_iface::make(ctrl_transport); //extract the mboard rev numbers _rev_lo = _iface->read_eeprom(I2C_ADDR_MBOARD, EE_MBOARD_REV_LSB, 1).at(0); _rev_hi = _iface->read_eeprom(I2C_ADDR_MBOARD, EE_MBOARD_REV_MSB, 1).at(0); //contruct the interfaces to mboard perifs _clock_ctrl = usrp2_clock_ctrl::make(_iface); _codec_ctrl = usrp2_codec_ctrl::make(_iface); _serdes_ctrl = usrp2_serdes_ctrl::make(_iface); //TODO move to dsp impl... //load the allowed decim/interp rates //_USRP2_RATES = range(4, 128+1, 1) + range(130, 256+1, 2) + range(260, 512+1, 4) _allowed_decim_and_interp_rates.clear(); for (size_t i = 4; i <= 128; i+=1){ _allowed_decim_and_interp_rates.push_back(i); } for (size_t i = 130; i <= 256; i+=2){ _allowed_decim_and_interp_rates.push_back(i); } for (size_t i = 260; i <= 512; i+=4){ _allowed_decim_and_interp_rates.push_back(i); } //setup the vrt rx registers _iface->poke32(U2_REG_RX_CTRL_NSAMPS_PER_PKT, _io_helper.get_max_recv_samps_per_packet()); _iface->poke32(U2_REG_RX_CTRL_NCHANNELS, 1); _iface->poke32(U2_REG_RX_CTRL_CLEAR_OVERRUN, 1); //reset _iface->poke32(U2_REG_RX_CTRL_VRT_HEADER, 0 | (0x1 << 28) //if data with stream id | (0x1 << 26) //has trailer | (0x3 << 22) //integer time other | (0x1 << 20) //fractional time sample count ); _iface->poke32(U2_REG_RX_CTRL_VRT_STREAM_ID, 0); _iface->poke32(U2_REG_RX_CTRL_VRT_TRAILER, 0); _iface->poke32(U2_REG_TIME64_TPS, size_t(get_master_clock_freq())); //init the ddc init_ddc_config(); //init the duc init_duc_config(); //initialize the clock configuration init_clock_config(); //init the codec before the dboard codec_init(); //init the tx and rx dboards (do last) dboard_init(); } usrp2_mboard_impl::~usrp2_mboard_impl(void){ /* NOP */ } /*********************************************************************** * Helper Methods **********************************************************************/ void usrp2_mboard_impl::init_clock_config(void){ //setup the clock configuration settings _clock_config.ref_source = clock_config_t::REF_INT; _clock_config.pps_source = clock_config_t::PPS_SMA; _clock_config.pps_polarity = clock_config_t::PPS_NEG; //update the clock config (sends a control packet) update_clock_config(); } void usrp2_mboard_impl::update_clock_config(void){ boost::uint32_t pps_flags = 0; //translate pps source enums switch(_clock_config.pps_source){ case clock_config_t::PPS_SMA: pps_flags |= U2_FLAG_TIME64_PPS_SMA; break; case clock_config_t::PPS_MIMO: pps_flags |= U2_FLAG_TIME64_PPS_MIMO; break; default: throw std::runtime_error("usrp2: unhandled clock configuration pps source"); } //translate pps polarity enums switch(_clock_config.pps_polarity){ case clock_config_t::PPS_POS: pps_flags |= U2_FLAG_TIME64_PPS_POSEDGE; break; case clock_config_t::PPS_NEG: pps_flags |= U2_FLAG_TIME64_PPS_NEGEDGE; break; default: throw std::runtime_error("usrp2: unhandled clock configuration pps polarity"); } //set the pps flags _iface->poke32(U2_REG_TIME64_FLAGS, pps_flags); //clock source ref 10mhz switch(_clock_config.ref_source){ case clock_config_t::REF_INT : _iface->poke32(U2_REG_MISC_CTRL_CLOCK, 0x10); break; case clock_config_t::REF_SMA : _iface->poke32(U2_REG_MISC_CTRL_CLOCK, 0x1C); break; case clock_config_t::REF_MIMO: _iface->poke32(U2_REG_MISC_CTRL_CLOCK, 0x15); break; default: throw std::runtime_error("usrp2: unhandled clock configuration reference source"); } //clock source ref 10mhz bool use_external = _clock_config.ref_source != clock_config_t::REF_INT; _clock_ctrl->enable_external_ref(use_external); } void usrp2_mboard_impl::set_time_spec(const time_spec_t &time_spec, bool now){ //set the ticks _iface->poke32(U2_REG_TIME64_TICKS, time_spec.get_tick_count(get_master_clock_freq())); //set the flags register boost::uint32_t imm_flags = (now)? U2_FLAG_TIME64_LATCH_NOW : U2_FLAG_TIME64_LATCH_NEXT_PPS; _iface->poke32(U2_REG_TIME64_IMM, imm_flags); //set the seconds (latches in all 3 registers) _iface->poke32(U2_REG_TIME64_SECS, boost::uint32_t(time_spec.get_full_secs())); } void usrp2_mboard_impl::issue_ddc_stream_cmd(const stream_cmd_t &stream_cmd){ _iface->poke32(U2_REG_RX_CTRL_STREAM_CMD, dsp_type1::calc_stream_cmd_word( stream_cmd, _io_helper.get_max_recv_samps_per_packet() )); _iface->poke32(U2_REG_RX_CTRL_TIME_SECS, boost::uint32_t(stream_cmd.time_spec.get_full_secs())); _iface->poke32(U2_REG_RX_CTRL_TIME_TICKS, stream_cmd.time_spec.get_tick_count(get_master_clock_freq())); } /*********************************************************************** * MBoard Get Properties **********************************************************************/ void usrp2_mboard_impl::get(const wax::obj &key_, wax::obj &val){ wax::obj key; std::string name; boost::tie(key, name) = extract_named_prop(key_); //handle the other props if (key.type() == typeid(std::string)){ if (key.as() == "mac-addr"){ byte_vector_t bytes = _iface->read_eeprom(I2C_ADDR_MBOARD, EE_MBOARD_MAC_ADDR, 6); val = mac_addr_t::from_bytes(bytes).to_string(); return; } if (key.as() == "ip-addr"){ boost::asio::ip::address_v4::bytes_type bytes; std::copy(_iface->read_eeprom(I2C_ADDR_MBOARD, EE_MBOARD_IP_ADDR, 4), bytes); val = boost::asio::ip::address_v4(bytes).to_string(); return; } } //handle the get request conditioned on the key switch(key.as()){ case MBOARD_PROP_NAME: val = str(boost::format("usrp2 mboard%d - rev %d:%d") % _index % _rev_hi % _rev_lo); return; case MBOARD_PROP_OTHERS:{ prop_names_t others = boost::assign::list_of ("mac-addr") ("ip-addr") ; val = others; } return; case MBOARD_PROP_RX_DBOARD: UHD_ASSERT_THROW(name == ""); val = _rx_dboard_proxy->get_link(); return; case MBOARD_PROP_RX_DBOARD_NAMES: val = prop_names_t(1, ""); return; case MBOARD_PROP_TX_DBOARD: UHD_ASSERT_THROW(name == ""); val = _tx_dboard_proxy->get_link(); return; case MBOARD_PROP_TX_DBOARD_NAMES: val = prop_names_t(1, ""); return; case MBOARD_PROP_RX_DSP: UHD_ASSERT_THROW(name == ""); val = _rx_dsp_proxy->get_link(); return; case MBOARD_PROP_RX_DSP_NAMES: val = prop_names_t(1, ""); return; case MBOARD_PROP_TX_DSP: UHD_ASSERT_THROW(name == ""); val = _tx_dsp_proxy->get_link(); return; case MBOARD_PROP_TX_DSP_NAMES: val = prop_names_t(1, ""); return; case MBOARD_PROP_CLOCK_CONFIG: val = _clock_config; return; case MBOARD_PROP_TIME_NOW:{ usrp2_iface::pair64 time64( _iface->peek64(U2_REG_TIME64_SECS_RB, U2_REG_TIME64_TICKS_RB) ); val = time_spec_t( time64.first, time64.second, get_master_clock_freq() ); } return; default: UHD_THROW_PROP_GET_ERROR(); } } /*********************************************************************** * MBoard Set Properties **********************************************************************/ void usrp2_mboard_impl::set(const wax::obj &key, const wax::obj &val){ //handle the other props if (key.type() == typeid(std::string)){ if (key.as() == "mac-addr"){ byte_vector_t bytes = mac_addr_t::from_string(val.as()).to_bytes(); _iface->write_eeprom(I2C_ADDR_MBOARD, EE_MBOARD_MAC_ADDR, bytes); return; } if (key.as() == "ip-addr"){ byte_vector_t bytes(4); std::copy(boost::asio::ip::address_v4::from_string(val.as()).to_bytes(), bytes); _iface->write_eeprom(I2C_ADDR_MBOARD, EE_MBOARD_IP_ADDR, bytes); return; } } //handle the get request conditioned on the key switch(key.as()){ case MBOARD_PROP_CLOCK_CONFIG: _clock_config = val.as(); update_clock_config(); return; case MBOARD_PROP_TIME_NOW: set_time_spec(val.as(), true); return; case MBOARD_PROP_TIME_NEXT_PPS: set_time_spec(val.as(), false); return; case MBOARD_PROP_STREAM_CMD: issue_ddc_stream_cmd(val.as()); return; default: UHD_THROW_PROP_SET_ERROR(); } }