// // Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by // the Free Software Foundation, either version 3 of the License, or // (at your option) any later version. // // This program is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. // // You should have received a copy of the GNU General Public License // along with this program. If not, see . // #ifndef INCLUDED_USRP2_FW_COMMON_H #define INCLUDED_USRP2_FW_COMMON_H #include /*! * Structs and constants for usrp2 communication. * This header is shared by the firmware and host code. * Therefore, this header may only contain valid C code. */ #ifdef __cplusplus extern "C" { #endif //fpga and firmware compatibility numbers #define USRP2_FPGA_COMPAT_NUM 7 #define USRP2_FW_COMPAT_NUM 10 #define USRP2_FW_VER_MINOR 4 //used to differentiate control packets over data port #define USRP2_INVALID_VRT_HEADER 0 // udp ports for the usrp2 communication // Dynamic and/or private ports: 49152-65535 #define USRP2_UDP_CTRL_PORT 49152 //#define USRP2_UDP_UPDATE_PORT 49154 #define USRP2_UDP_RX_DSP0_PORT 49156 #define USRP2_UDP_TX_DSP0_PORT 49157 #define USRP2_UDP_RX_DSP1_PORT 49158 // Map for virtual firmware regs (not very big so we can keep it here for now) #define U2_FW_REG_LOCK_TIME 0 #define U2_FW_REG_LOCK_GPID 1 #define U2_FW_REG_VER_MINOR 7 //////////////////////////////////////////////////////////////////////// // I2C addresses //////////////////////////////////////////////////////////////////////// #define USRP2_I2C_DEV_EEPROM 0x50 // 24LC02[45]: 7-bits 1010xxx #define USRP2_I2C_ADDR_MBOARD (USRP2_I2C_DEV_EEPROM | 0x0) #define USRP2_I2C_ADDR_TX_DB (USRP2_I2C_DEV_EEPROM | 0x4) #define USRP2_I2C_ADDR_RX_DB (USRP2_I2C_DEV_EEPROM | 0x5) //////////////////////////////////////////////////////////////////////// // EEPROM Layout //////////////////////////////////////////////////////////////////////// #define USRP2_EE_MBOARD_REV 0x00 //2 bytes, little-endian (historic, don't blame me) #define USRP2_EE_MBOARD_MAC_ADDR 0x02 //6 bytes #define USRP2_EE_MBOARD_IP_ADDR 0x0C //uint32, big-endian #define USRP2_EE_MBOARD_BOOTLOADER_FLAGS 0xF7 typedef enum{ USRP2_CTRL_ID_HUH_WHAT = ' ', //USRP2_CTRL_ID_FOR_SURE, //TODO error condition enums //USRP2_CTRL_ID_SUX_MAN, USRP2_CTRL_ID_WAZZUP_BRO = 'a', USRP2_CTRL_ID_WAZZUP_DUDE = 'A', USRP2_CTRL_ID_TRANSACT_ME_SOME_SPI_BRO = 's', USRP2_CTRL_ID_OMG_TRANSACTED_SPI_DUDE = 'S', USRP2_CTRL_ID_DO_AN_I2C_READ_FOR_ME_BRO = 'i', USRP2_CTRL_ID_HERES_THE_I2C_DATA_DUDE = 'I', USRP2_CTRL_ID_WRITE_THESE_I2C_VALUES_BRO = 'h', USRP2_CTRL_ID_COOL_IM_DONE_I2C_WRITE_DUDE = 'H', USRP2_CTRL_ID_GET_THIS_REGISTER_FOR_ME_BRO = 'r', USRP2_CTRL_ID_OMG_GOT_REGISTER_SO_BAD_DUDE = 'R', USRP2_CTRL_ID_HEY_WRITE_THIS_UART_FOR_ME_BRO = 'u', USRP2_CTRL_ID_MAN_I_TOTALLY_WROTE_THAT_UART_DUDE = 'U', USRP2_CTRL_ID_SO_LIKE_CAN_YOU_READ_THIS_UART_BRO = 'v', USRP2_CTRL_ID_I_HELLA_READ_THAT_UART_DUDE = 'V', USRP2_CTRL_ID_HOLLER_AT_ME_BRO = 'l', USRP2_CTRL_ID_HOLLER_BACK_DUDE = 'L', USRP2_CTRL_ID_PEACE_OUT = '~' } usrp2_ctrl_id_t; typedef enum{ USRP2_DIR_RX = 'r', USRP2_DIR_TX = 't' } usrp2_dir_which_t; typedef enum{ USRP2_CLK_EDGE_RISE = 'r', USRP2_CLK_EDGE_FALL = 'f' } usrp2_clk_edge_t; typedef enum{ USRP2_REG_ACTION_FPGA_PEEK32 = 1, USRP2_REG_ACTION_FPGA_PEEK16 = 2, USRP2_REG_ACTION_FPGA_POKE32 = 3, USRP2_REG_ACTION_FPGA_POKE16 = 4, USRP2_REG_ACTION_FW_PEEK32 = 5, USRP2_REG_ACTION_FW_POKE32 = 6 } usrp2_reg_action_t; typedef struct{ uint32_t proto_ver; uint32_t id; uint32_t seq; union{ uint32_t ip_addr; struct { uint32_t dev; uint32_t data; uint8_t miso_edge; uint8_t mosi_edge; uint8_t num_bits; uint8_t readback; } spi_args; struct { uint8_t addr; uint8_t bytes; uint8_t data[20]; } i2c_args; struct { uint32_t addr; uint32_t data; uint8_t action; } reg_args; struct { uint8_t dev; uint8_t bytes; uint8_t data[20]; } uart_args; struct { uint32_t len; } echo_args; } data; } usrp2_ctrl_data_t; #ifdef __cplusplus } #endif #endif /* INCLUDED_USRP2_FW_COMMON_H */